Académique Documents
Professionnel Documents
Culture Documents
Manufacturer:
Blakley Electrics
PA05/01802
Issue :
Valid From :
7
13/05/2013
Product Image
AC PHT Series
DC PHT Series
Scope of Acceptance
Full Acceptance
Accepted for use as Isolating Transformers for AC and DC supplies to points heating strips
Network Rail Acceptance Panel (NRAP) hereby authorises the product above for use and trial use on railway infrastructure for which
Network Rail is the Infrastructure Manager under the ROGS regulations.
Authorised by:
pp
James Lewis
Technology Introduction Manager
pp
Richard Stainton
Professional Head
Certificate of Acceptance
PA05/01802
Manufacturer:
Blakley Electrics
Issue :
Valid From :
7
13/05/2013
Specific Conditions
The following Conditions are specific to the approved product/s contained within this Certificate. These conditions must
be adhered to in addition to the Network Rail General Conditions contained within the General Terms and Conditions
section.
Failure to adhere to these conditions may result in the withdrawal or suspension of Acceptance of some, or all of the
items contained within the accepted configuration.
Manufacturer
1)
To supply technical data for the 5kVA 400/110V 3ph i/p ; d.c. o/p transformer.
Product Configuration
System or Complete Assembly
Item No.
Part No./ Type
S170887
PHT/5/SH/PJ/DUAL/99VDC/
IP23/230VPRI
S170888
PHT/10/SH/PJ/DUAL/99VDC/
IP23/230VPRI
S170889
PHT5/SH/PJ/DUAL/99VDC/
IP23/400VPRI
S170890
PHT/10/SH/PJ/DUAL/110VDC/
IP23/3PH/400VPRI
S170892
PHT/10/SH/PJ/DUAL/99VDC/
IP23/400VPRI
S170893
PHT/5/SH/PJ/DUAL/99VDC/
IP23/230V/GALV
S170894
PHT/10/SH/PJ/DUAL/99VDC/
IP23/230V/GALV
S170895
PHT5/SH/PJ/DUAL/99VDC/
IP23/400V/GALV
S170896
PHT/10/SH/PJ/DUAL/110VDC/
IP23/3PH/400V/GALV
Description
5 kVA 230V single phase
primary transformer rectifier
for DC points heating.
10 kVA 230V single phase
primary transformer rectifier
for DC points heating.
5 kVA 400V single phase
primary transformer rectifier
for DC points heating.
10 kVA 400V three phase
primary transformer rectifier
for DC points heating.
10 kVA 400V single phase
primary transformer rectifier
for DC points heating.
5 kVA 230V single phase
primary transformer rectifier
for DC points heating
(galvanised).
10 kVA 230V single phase
primary transformer rectifier
for DC points heating
(galvanised).
5 kVA 400V single phase
primary transformer rectifier
for DC points heating
(galvanised).
10 kVA 400V three phase
primary transformer rectifier
for DC points heating
(galvanised).
Page 2 of 7
Catalogue No.
055/121364
055/121363
055/121365
055/121366
055/162060
055/162063
055/162064
055/162065
055/162066
Certificate of Acceptance
PA05/01802
Manufacturer:
Blakley Electrics
Issue :
Valid From :
Item No.
S170969
S170897
PHT/10/SH/PJ/DUAL/99VDC/
IP23/400V/GALV
S170835
PHT/5/SH/PJ/DUAL/IP23/110VAC/
1PH/230VPRI/GALV
S170836
PHT/10/SH/PJ/DUAL/IP23/110VAC/
1PH/230VPRI/GALV
S170930
PHT/5/SH/PJ/DUAL/IP23/110VAC/
1PH/400VPRI/GALV
S170931
PHT/10/SH/PJ/DUAL/IP23/110VAC/
1PH/400VPRI/GALV
S170933
PHT/5/SH/PJ/DUAL/IP23/110VAC/
3PH/400VPRI/GALV
S170834
PHT/10/SH/PJ/DUAL/IP23/110VAC/
3PH/400VPRI/GALV
7
13/05/2013
Description
5 kVA 400V three phase
primary transformer rectifier
for DC points heating
(galvanised).
10 kVA 400V single phase
primary transformer rectifier
for DC points heating
(galvanised).
5 kVA 230V single phase
primary transformer for AC
points heating (galvanised).
10 kVA 230V single phase
primary transformer for AC
points heating (galvanised).
5 kVA 400V single phase
primary transformer for AC
points heating (galvanised).
10kVA 400V single phase
primary transformer for AC
points heating (galvanised).
5 kVA 400V three phase
primary transformer for AC
points heating (galvanised).
10 kVA 400V three phase
primary transformer for AC
points heating (galvanised).
Catalogue No.
055/162073
055/162067
055/162061
055/162062
055/162068
055/162069
055/162071
055/162072
Catalogue No.
055/162074
055/162075
055/162076
055/162077
055/162078
055/162079
Assessed Documentation
Reference
Title
Page 3 of 7
Doc.
Rev.
4
06/08/2009
Certificate of Acceptance
PA05/01802
Manufacturer:
Blakley Electrics
Issue :
Valid From :
Reference
Title
7
13/05/2013
Doc.
Rev.
4
06/08/2009
06/08/2009
13/07/2009
13/07/2009
13/07/2009
17/07/2009
13/07/2009
25/07/2011
Certificate History
Issue
1
2
3
4
5
6
7
Date
28/07/2003
15/06/2005
02/09/2005
01/09/2009
14/09/2009
27/07/2011
13/05/2013
Issue History
First accepted for use
Additional transformer added to certificate
Additional transformer (10KA) added to certificate
Specification for all transformers/rectifiers revised
Re-issued to add items to the product configuration
Re-issued to add items to the product configuration
Re-issued to add 5KVA 3ph D.C. transformer
Page 4 of 7
Certificate of Acceptance
PA05/01802
Manufacturer:
Blakley Electrics
Issue :
Valid From :
7
13/05/2013
Contact Details
Manufacturer
Sponsor
Roy Gardner
E&P Engineer (Wessex)
roy.gardner@networkrail.co.uk
Graham Thompson
Senior Project Engineer
Graham.thompson3@networkrail.co.uk
Page 5 of 7
Certificate of Acceptance
PA05/01802
Manufacturer:
Blakley Electrics
Issue :
Valid From :
7
13/05/2013
Page 6 of 7
Certificate of Acceptance
PA05/01802
Manufacturer:
Blakley Electrics
Issue :
Valid From :
7
13/05/2013
4) Compliance
Railways and Other Guided Systems (ROGS) Regulations
1) Where the product is to be used in areas where Network Rail is not the Infrastructure Manager (e.g. leased stations), the sponsor
shall additionally obtain formal consent from the Infrastructure Manager for the locality where the equipment is to be installed. This may
include a requirement for additional safety verification. The decision of that Infrastructure Manager is binding, and cannot be overridden
by Network Rail except by the escalation processes established in the ROGS regulations
2) As required in Railway Group Standard GE/RT8270, at each use of this product the project or group responsible for installation and
commissioning shall be required to demonstrate compatibility with:
a. All rail vehicle types that have access rights over the area affected by the change
b. Infrastructure managed by others
c. Neighbours.
Railway Interoperability Regulations
3) For interoperable constituents of systems the project or group responsible for installation and commissioning shall be required to
demonstrate compliance with the relevant Technical Specifications for Interoperability (TSI) where appropriate.
4) An authorisation from the national safety authority (i.e. the Railway Safety Directorate of the Office of Rail Regulation) is required
before the equipment is to be used in revenue earning service.
5) Supply Chain Arrangements
1) Certificates of acceptance do not imply any particular quantity of supply nor any exclusivity of supply.
2) Products may be purchased by Network Rail or its agents, suppliers or contractors.
3) Manufacturers should note that it is not necessary to enter into any exclusive supply arrangements with resellers or other suppliers.
Page 7 of 7