Académique Documents
Professionnel Documents
Culture Documents
BY
ACHIRANSHU GARG
CHANDIGARHG-160019 (INDIA)
December, 2014
The footer can include name of the department and the college. Place footer and header only in main body
of the report, not in title/front pages
The content pages of the project report should have mention of the project name
CHANDIGARHG-160019 (INDIA)
December, 2014
The footer can include name of the department and the college. Place footer and header only in main body
of the report, not in title/front pages
The content pages of the project report should have mention of the project name
CERTIFICATE
I hereby certify that the work which is being presented in the B. E. Major (or
Minor) Project Report entitled Investigation on Various Low Power Techniques for
CMOS Circuits, in partial fulfillment of the requirements for the award of the Bachelor
of Technology in Electronics & Communication Engineering and submitted to the
Department of Electronics & Communication Engineering of Chandigarh College of
Engineering and Technology (Degree Wing), Chandigarh is an authentic record of my
own work carried out during a period from June 2104 to December 2014 under the
supervision of Name & Designation of supervisor(s),E&CE Department.
The matter presented in this thesis report has not been submitted by me for the
award of any other degree elsewhere.
Signature of Candidate
ACHIRANSHU GARG
R.No.04401
This is to certify that the above statement made by the candidate is correct
to the best of my knowledge.
Signature of Supervisor(s)
Date: Name & Designation
Project Supervisor(s)
Head
Electronics &Communication EngineeringDepartment
Chandigarh College of Engineering and Technology (Degree Wing), Chandigarh
The content pages of the project report should have mention of the project name
IEEE Transaction style for References, it should be followed in the text as well.
Each Figure should have a Caption below& Table should have a Caption above it and
each Table & Figure should find a mention in the text, refer to any IEEE Transaction
Paper, eg. IEEE Trans. on VLSI, ED etc.
The content pages of the project report should have mention of the project name
Similarly Section 3 may explain different sub-systems, each in one of the subsections. This may include the detailed design, such as list of materials and
components, etc.
Section 4 may describe the methodology adopted to fabricate/present the project.
For example, manufacturing of the components/software modules and their final
assembly may be discussed in this module.
Section 5 may include information about the implementation. For example, how
the product or software functions, things like information flow, etc.
Note: The above mentioned sections to consider as a general guideline and the
student may alter the nomenclature and/or sequence depending upon the
requirements and his/her own judgment/wisdom.
2.1 Subsections in Running Fonts (14)
3..etc.
6. RESULTS AND DISCUSSION
The results should indicate information such as performance details, efficiency of the
product/software/system. The comparison of the developed system/product with other
similar systems /products /benchmark, etc.
7. CONCLUSIONS
The conclusions describe about the work presented in the project report. It should also
include any shortcoming in the project and scope of future improvement/work
REFERENCES
Format of references: Use referencing style of the IJAMT Journal. Every reference is to
be cited in the main body of the report.
Example references
1.
2.
3.
4.
5.
6.
7.
The content pages of the project report should have mention of the project name
Note: 03 copies hardbound are required (01 library +01 teacher + 01 library)
The footer can include name of the department and the college. Place footer and header only in main body
of the report, not in title/front pages