Vous êtes sur la page 1sur 4

power distribution

Double Break
Rotary Isolator
Type tested design
Manual or motor operated
System voltage 33kV/66kV
Australian design and manufacture
Rated short time withstand current 31.5kA (3 seconds)

Double Break Ro
General arrangement

The Ampcontrol double break rotary isolator has


been type tested by a NATA approved testing
authority and complies with Australian Standard AS
1306 - 1985 and IEC 60129 amendments parts
I and II. Options exist to supply the unit partially
assembled or in a basic flat pack assembly.

Basic unit

The basic triple pole rotary isolator can be


supplied with two 2900mm high galvanised steel
support columns and is padlockable in the on
and off positions. All isolators are supplied with a
manual operating handle and linkages. Operating
shaft lengths can be customised to suit individual
requirements. Mounting options include utilising the
support columns, pole mount or assembly onto a
switchroom roof.

Features/Benefits:









Australian design and manufacture to suit local conditions


Engineering support readily available - application assistance
Low maintenance - cost effective
Type tested design complies to Australian and IEC Standards - reliability assured
Positive 2:1 switch movement provides ease of operation
Motor operated open/closing mechanism option available (type tested)
Part assembled option simplifies installation
Load and/or line side earth switch option available
Integrated mechanical interlocking ensures failsafe operation
Security key option enhances operator safety

Applications:





Feeder isolators
Switchyards
Zone substations
Traction installations
Relocatable substations
Mobile mining substations

POWER THROUG

otary Isolator
Simplified installation

The isolator is available in both flat pack and part


assembled formats ready for installation. The
part assembled option can reduce the amount of
time required on-site and simplifies the switchgear
installation.
The ground level erection process requires only four
stages - stand the two support columns, position the
base frame on the columns, mount operating handles
and fit interconnecting rods. Final inspection and
operational checks follow.

Earth switches

Earth switches can be fitted for load and/or line side


operation and are provided with a mechanical interlock
to prevent simultaneous closing onto the isolator. All
standard earth switches are supplied with a manual
operating handle and linkages. Earth switch auxiliary
contacts are also available.

Flicker blades

Stainless steel flicker blades can be supplied for


installations requiring the breaking of low currents
associated with system stored energy, such as line
charging currents in cables or overhead lines.

Rotary isolator auxiliary contacts

To allow status signalling for manually operated


isolators a separate position indicating switch can be
provided in an IP66 metal enclosure.

Motor operator

As an alternative to manual operation, a type


tested design DC motor drive assembly can
be fitted to the isolator in lieu of the operating
handle. The motor control assembly is fully
self contained and supplied in an IP66 metal
enclosure.

Solenoid interlock

The operating handle can be fitted with an


electrical solenoid interlock arrangement
complete with auxiliary contacts. A
mechanical key style interlock kit can also
be implemented

GH INNOVATION

Isolator and earth switch utilise


multi-contact parallel arrangement

Manual operating handle

Earth switch
operating mechanism

Technical Ratings
Description
System highest primary voltage

36kV rms

72.5kV rms

System nomial primary voltage

33kV

66kV

Rated short-time withstand current for 3 seconds

31.5kA rms

31.5kA rms

Phases per unit

Impulse - flashover co-ordinated

200kVp

325kVp

Rated frequency

50Hz

50Hz

Rated normal current

1250-2000A rms

1250-2000A rms

Rated peak withstand current

78.8kA

78.8kA

Class

Outdoor

Outdoor

Lightning impulse, full wave, either polarity


-- Phase to earth and between poles
-- Across open disconnector

200kVp
230kVp

325kVp
375kVp

Power frequency (1 minute)


-- Phase to earth (dry)
-- Across open disconnector (dry)
-- Phase to earth (wet)
-- Across open disconnector (wet)

70kV
80kV
60kV
80kV

140kV
160kV
140kV
160kV

Accessories







ROT-02/09

Value

Galvanised support columns


Security key interlock adaptor kit
Earth switch auxiliary contacts
Earth switch position indication flags
Flicker blades
Rotary isolator auxiliary contacts
Motor operator 110VDC
Solenoid interlock kits

AMPCONTROL POWER
Ampcontrol SWG ABN 78 001 737 533
6 Martin Drive
Tomago NSW 2322
Phone: (02) 4964 8288
Fax: (02) 4964 8555
power@ampcontrolgroup.com
www.ampcontrolgroup.com

rms
rms
rms
rms

rms
rms
rms
rms

Test report No. 101187


IEC 60129: 1984 with amendments No's
1 and 2 (Mechanical endurance: motor
operator/disconnector/earth switch - 1000
operations).
AS1306 - 1985 High voltage AC switchgear
and control gear - disconnectors (isolators)
and earthing switches (Mechanical endurance:
motor operator/disconnector/earth switch 1000 operations).
AS2395 - 1980 Terminals for switchgear
assemblies for alternating voltages above 1kV.
AS2650 - 1986 High voltage AC switchgear
and control gear - common requirements.

Vous aimerez peut-être aussi