Vous êtes sur la page 1sur 2

LEAP Office Version 2.

0
Copyright(c) 1995 - 1999 Men at Work Infotech Pvt Ltd, CDAC. All rights reserved
.
STEPS FOR CLIENT/SERVER INSTALLATION (NETWORK) :
Following are the steps to install LEAP Office in the Network environment. Remem
ber that to use
LEAP Office as described below you must have a Network license that you will get
with the package
if you have purchased LEAP Office for the Network.
Step 1.
Select one of the PC on your LAN as a server to hold LEAP Office. This PC can be
running Windows
for Workgroups, Windows 95, Windows 98, Windows NT Workstation or Windows NT Ser
ver. If you
are installing on Windows NT make sure that you are logged on with Administrator
priviliges
since the installation makes entries in the registry and creates files in the Wi
ndows folder.
Step 2.
Do an installation of LEAP Office on that PC. Remember to give the Serial number
when the
installation asks for it.
Step 3.
Typically LEAP Office is installed in "C:\Program Files\LEAP Office", unless you
have specified
another folder for it during the installation. Share this ...\LEAP Office folder
where LEAP Office
is installed with Full (read and write) permissions, since the user profiles wil
l be
written on the server PC.
Follow these steps to share the ...\LEAP Office folder.
For Windows 95
a. In Windows Explorer, click the folder you want to share.
b. On the File menu, click Properties.
c. Click the Sharing tab, and then click Shared As and give shared name
as "LEAP Office SERVER". If the Sharing tab is not visible, you need
to enable
file and print sharing services. (To enable the file sharing services
go to
Control Panel, double click on network icon to displa
y Network Properties.
Click on the File and Print Sharing. Click the sharing option you wan
t.
A check mark means this feature is activated.)
For Windows NT
a. Contact your Network Administrator to share the ..\LEAP Office folder
on the server
and give the name "LEAP Office SERVER" for the ..\LEAP Office folder
which is now shared.
Step 4.
Now the server part of the installation is ready. Do the following on other PCs
on the
network (now known as client PCs) to install LEAP Office on them.
a. Right click on the Network Neighbourhood in explorer and select
Map Network Drive give the Network path as \\ServerPCName\LEAP Office
SERVER

b.
c.
d.
e.

and select the Reconnect at Logon check box.


Now you will see a new drive in Explorer.
Browse to the NetSetup folder within this new drive.
Run NetSetup.exe from that folder.
Follow the setup instructions on the screen.

NOTE:
1. If you don't have the LEAP Office network license, you can only insta
ll
the lite (Trial Copy) on the client PCs. Contact your dealer or
CDAC for getting a Network License.
2. To run LEAP Office on the client PCs, the server PC must always be on
.
<END OF NETWORK.TXT>

Vous aimerez peut-être aussi