Académique Documents
Professionnel Documents
Culture Documents
CURRICULUM VITA
Name:
Shahid Mehmood
Address:
Chak No. 18 G, Tehsil Chishtian District Bahawalnagar. (Permanent)
House # 120, Sector D2, Block # 3, Green Town Lahore.(Temporary)
Contact Details:
Mobil (Pak): 0092 (0)300-4065341
Mobile (UAE): 00971-50-7834147
Email: shahidmehmood16@yahoo.com
Nationality:
Date of Birth:
Pakistani
Passport No:
Languages
FEO155952
English, Urdu
Education:
1990-1993 Diploma of Associate Engineer (Mechanical)
International Standards Knowledge
Good knowledge of ASME B 31.1, ASME 31.3, ASME Sec. V, ASME Sec. VIII Div. 1,
ASME Sec. IX, B16, API 650, EN 12063, EN 12048, AWS D 1.1 etc.
Technical Qualifications:
Page 2 of 8
CURRICULUM VITA
Work Experience:
Having 14 years strong experience in the fields of Oil & Gas, Petrochemical Plants,
Refineries, and Power Plants etc. Worked successfully in team and solo situations.
Performed successful inspections throughout Pakistan. The majority of previous work,
Piping Fabrication and Erection, Structural Inspection, Welding Inspection,
Interpretation of radiographic films, as third party inspector, Magnetic Particle testing
and dye Penetrant testing of welding joints of storage tank, pressure vessels, piping
during newly construction and in-service.
Extensive experience with computers through both advanced inspections and the
writing of technical reports using Microsoft Windows programs. Majority of the
inspections performed have been with facility maintenance and preservation being the
main priority.
From:
Feb 2, 2015 to Feb 25, 2015
Shut Down: Dolphin Energy
Position: QC Inspector
Employer: Descon Engineering
Client:
Dolphin Energy
Responsibilities:
VESSEL/COLUMN/DRUM/ HEAT EXCHANGERS
Inspection of main ways, blind flanges, flange facing , suction lovers for proper integrity and reliability
Inspection of vessel and column internals for their proper integrity and life assessment
Recommending repair and rectification for vessel , column internals
Following up and making surety for proper procedure adopted for welding for different rectification of
accumulator trays, demister pads, and nozzles
Inspection for cleanliness of shell internal
Inspection of thickness of shell and nozzles
Inspection of leak test for accumulator trays
Inspection of DPT for different parts and critical areas of Vessels and columns
Inspection of proper cleaning and alignment of Vessels internals like demister pad, accumulator trays, main
way trays, distribution pipes
Co-ordination with Technical support department regarding technical issues for any modification of
Demister pads
Inspection of circumferential and longitudinal weld seams for proper integrity
Liaison with client regarding rectification of trays, piping assemblies, distribution plates
Proper inspection of Gasket rating and gasket type as per drawings
Proper inspection of tightening method for manholes
HEAT EXCHANGER
Inspection of Channel head , floating head, floating head cover
Inspection of pass partition for corrosion and pitting
Inspection of Shell for corrosion and erosion
Inspection of tube bundle for cleaning
Inspection of tie rods and baffle plates
Inspection of tubes for pitting and corrosion , erosion attach
Recommending proper procedure of repair and rectification if found any indication which could possibly
Page 3 of 8
CURRICULUM VITA
make some hazardous incident in next 5 years
Inspection of proper procedure adopted for welding of tie rods and baffle plates as per
ASME and TEMA
Inspection of Hydro test of heat exchanger from shell side and tube side
Inspection of differential pressure test
Inspection of proper flange facing
Inspection of rolling of heat exchanger tubes
Inspection of proper hydro jetting cleaning of tubes
From:
April 15, 2012 to Mar 2, 2014
Project: EPC-4 Tankage Interconnecting & Associated Piping
Position: Piping Inspector
Employer: Descon Engineering
Client:
Daewoo E & C
Responsibilities:
1. Receipt inspection of material according to quality procedures, client &
manufacturer documents
2. Witness Welder Qualification Test as per ASME Sec X.
3. Piping fit-up inspection.
4. Pipe spools dimensional inspection as per drawings.
5. Visual Welding inspection as per project spec and standards.
6. Review of Test pack and preparing punch list.
7. Spool errection inspection and fabrication inspection as per ISO metric
From:
Mar 5, 2011 to April 8, 2012
Project: HABSHAN 5
Position: Piping Inspector
Employer: Descon Engineering
Client:
JGC Engineering
Responsibilities:
1. Receipt inspection of material according to quality procedures, client &
manufacturer documents
2. Witness Welder Qualification Test as per ASME Sec X.
3. Piping fit-up inspection.
4. Pipe spools dimensional inspection as per drawings.
5. Visual Welding inspection as per project spec and standards.
6. Review of Test pack and preparing punch list.
7. Spool errection inspection and fabrication inspection as per ISO metric
Page 4 of 8
CURRICULUM VITA
From: Sep 6, 2010 to Nov 18, 2010
Project: Gasoline/Condensate Plant Overhaul
Shutdown
Position: QC Inspector
Employer: Descon Engineering
Client: TAKREER Oil Refinery
Responsibilities:
Inspection of main ways, blind flanges, flange facing , suction lovers for proper integrity and reliability
Inspection of vessel and column internals for their proper integrity and life assessment
Recommending repair and rectification for vessel , column internals
Following up and making surety for proper procedure adopted for welding for different rectification of
accumulator trays, demister pads, and nozzles
Inspection for cleanliness of shell internal
Inspection of thickness of shell and nozzles
Inspection of leak test for accumulator trays
Inspection of DPT for different parts and critical areas of Vessels and columns
Inspection of proper cleaning and alignment of Vessels internals like demister pad, accumulator trays, main
way trays, distribution pipes
Co-ordination with Technical support department regarding technical issues for any modification of
Demister pads
Inspection of circumferential and longitudinal weld seams for proper integrity
Liaison with client regarding rectification of trays, piping assemblies, distribution plates
Proper inspection of Gasket rating and gasket type as per drawings
Proper inspection of tightening method for manholes
HEAT EXCHANGER
Inspection of Channel head , floating head, floating head cover
Inspection of pass partition for corrosion and pitting
Inspection of Shell for corrosion and erosion
Inspection of tube bundle for cleaning
Inspection of tie rods and baffle plates
Inspection of tubes for pitting and corrosion , erosion attach
Recommending proper procedure of repair and rectification if found any indication which could possibly
make some hazardous incident in next 5 years
Inspection of proper procedure adopted for welding of tie rods and baffle plates as per
ASME and TEMA
Inspection of Hydro test of heat exchanger from shell side and tube side
Inspection of differential pressure test
Inspection of proper flange facing
Inspection of rolling of heat exchanger tubes
Inspection of proper hydro jetting cleaning of tubes
Page 5 of 8
CURRICULUM VITA
Inspection of main ways, blind flanges, flange facing , suction lovers for proper integrity and reliability
Inspection of Furnace internals for their proper integrity and life assessment
Inspection of Tubes for hotspots shapes, Brackets Bottom Tube guide
Inspection of Hangers and Anchor and Thermo Couples
Inspection of Refectory
Inspection of Burner assemblies, Air register, Burner tips
Inspection of Fuel gas strainers, Fuel gas sample lines, and Explosion door
Inspection of Snuffing steam lines, Header, Spring Sports
Inspection of Damper and Damper shaft
Page 6 of 8
CURRICULUM VITA
1st February 1998 to 10th December 2006
Position: Senior Piping / NDT Inspector
1. Review of drawings.
2. Review and approve of WPS & PQR.
3. Inspection of in coming material.
4. Inspection of Material Tractability.
5. Inspection of piping fabrication, erection and welding at site and workshop.
6. Inspections of heat shrink sleeve installation.
7. Inspection of valve testing activities.
8. Review and approve welding inspection reports.
9. Check the welding parameters according to WPS.
10. Fit-up checking.
11. Inspection of temperature Tie-in joints
12. Test pack preparation and review
13. Punch list preparation.
14. Witness of hydro testing.
15. Witness of pneumatic test.
16. Witness of leak test.
17. Internal cleaning by water flashing, air blowing, pigging, and drying.
18. Inspection of painting and sand blasting.
1.
2.
3.
4.
5.
FJFC Karachi
Page 7 of 8
CURRICULUM VITA
Client : DESCON ENGINEERING as Piping Inspector
1.
2.
3.
4.
5.
6.
Client
: BHP
Employer:
Inspectest (Pvt.) Limited
Project Responsibilities :
Piping Inspector
1. WQT Witness, Fit up and inspection,
2. Dimensional inspection,
3. Welding inspection,
4. Test pack and punch list,
5. Spool errection inspection and fabrication inspection as per ISO metric
Sui Northern Gas Pipeline:
Client
Employer:
SNGPL
Inspectest (Pvt.) Limited
Project Description
Piping Inspector
1.
2.
3.
4.
5.
6.
Page 8 of 8
CURRICULUM VITA
5th August 1994 to 11 March 1995
Jiacco Pakistan Private Limited
Position: Welding & Piping Inspector
Involved in various Pipe line inspection as welding inspector and NDT jobs in Pakistan
working for Advanced Inspection Services division.
BOSSIKAR REFINERY
Client : DESCON ENGINEERING as Piping Inspector
1. Project Description :
2. NDE Services (Radiographic Testing),
3. Magnetic Particle Testing, Dye Penetrate Testing) for various Vessels,
4. Heat Exchangers. Boilers,
5. LPG Bowzers, Storage Tanks,
6. Piping Spools during fabrication.
DESCON ENGINEERING WORKS (DEW)
Client : DESCON ENGINEERING
Employer: Jiacco Pakistan (PVT) Limited
Client : DESCON ENGINEERING as Piping Inspector
1. Project Description :
2. NDE Services (Radiographic Testing,
3. Magnetic Particle Testing, Dye Penetrate Testing) for various Vessels,
4. Heat Exchangers. Boilers,
5. LPG Bowzers, Storage Tanks,
6. Piping Spools during fabrication.