Académique Documents
Professionnel Documents
Culture Documents
Exclusive craftsmanship
creates extraordinary tools.
Our philosophy follows a simple principle: Long live crafts! And it is precisely this enthusiasm that drives us year in, year out to comb through the
our high standards.
To help us master this challenge, we have established an elaborate selection process for new products at DICTUM. Our product specialists put each
product through intensive testing before it becomes part of our product
range, focussing on the tools functionality and craftsmanship. Often, tools
are also tested thoroughly over weeks and months in our course workshops.
And we always pay special attention to the origin of the products and the
materials used. Because we want you to know that the tools you buy from
DICTUM are free of harmful substances. We also guarantee that we know
exactly where our products have come from - we only sell originals.
For Dictum, a Japanese saw, for example, is not just a tool but, in all its
perfection, is the result of decades of experience in both the manufacture
and handling of tools. We also love to share this knowledge with you, which
is why we warmly recommend our workshops. These give you the special
opportunity to share and expand your knowledge with like-minded people
and international masters of their art in a relaxed atmosphere. There is
bound to be a workshop that suits you.
Now we will leave you to get inspired by our new DICTUM catalogue.
We hope you enjoy discovering our new tools and old favourites!
Yours sincerely,
Petra Steinberger
Managing Director DICTUM GmbH
By telephone
By fax
By post mail
Ordering
"#$%""&#"&"#"
"#$%&'#"&"#"/
Ordering
"#$%""&#"&"#'
"#$%&'#"&"#'/
Consulting
+49-(0)991-9109-911
+49-(0)1805-9109-911*
DICTUM GmbH
Donaustrae 51
"23
Germany
Given the huge range of our products, choosing the one that suits
your requirements best is not always easy. We will be pleased to offer
you competent advice. After all, we use our tools and materials ourselves and are therefore familiar with even the smallest details.
Testing.
In our headquarter in Metten, you can try tools before you buy them. How do they feel in your hand?
Which special features do they have? Our experts will assist you with valuable information and tips.
Opening hours shop in Metten:
Mondays - Fridays
9 a.m. to 7 p.m.
Saturdays
9 a.m. to
The
DICTUM GmbH
Donaustr. 51
"23
Germany
BENEFITS at DICTUM:
DICTUM brands.
Quality assurance.
A high quality standard is the result of a lot of diligence and commit<
= #
nufacturer quality assurance procedures and a 100 per cent receiving
inspection in our company. This ensures that we can guarantee the
high utility characteristics to you that have already prompted customers
to say: Yes, thats worth it for me. And if a fault does get detected
=
>
For DICTUM quality also means that our products are free of harmful
substances. Our materials and tools contain no additives that are potentially hazardous to health or the environment.
HATTORI
SHINKO
Online newsletter.
The DICTUM newsletter always keeps you fully informed: Sign up at
www.mehr-als-werkzeug.de/newsletter and you will regularly receive
up-to-date information
on special offers, workshops,
@
valuable tips.
Online
In-Store Sale
;}
##
Webshop: www.more-than-tools.de
Handicraft gallery:
www.dictum-handwerksgalerie.de
* 14 cents/min from German landlines / calls from mobiles may cost more.
Shipping charges.
For most of our high-quality products, spare parts are readily obtainable even years after the purchase. This means that you can use your
proven and trusted tool for a very long time.
International
]
?
;
^_$;
^%]
;
^
be invoiced as follows: Austria, Belgium, Bulgaria, Cyprus, Czech
`7={
=; =Z=]=]
=|
<
=
Greece, Hungary, Ireland, Italy, Lithuania, Luxembourg, Latvia, Malta,
The Netherlands, Poland, Portugal, Rumania, Sweden, Slovenia,
Z };
""
$;
'^2%
Satisfaction
Immediate delivery.
;?
&#
Our sharpening experts know how it is done. After all, they were
trained in Japan.
You can have premium class products that bear this logo sharpened
by our experts at any time free of charge and without limitation. And
you will bear only the postage costs.
Sharpening pass
DICTUM workshops
Learn to expertly handle tools, materials and techniques in a stimulating environment. Our bright and
perfectly equipped course workshops in an inspiring
setting are a paradise for any craftsman.
We have two workshop centres in Germany in:
We sharpen tools and knives bearing this mark free of charge twice.
Here too, you bear only the postage costs.
WOR
K
SHOPS
2012
Ethical principles.
This respect for things also extends to how
we engage with people. Our business partners, customers and employees can rely
on our honesty and fairness. If we promise
something, we abide by that commitment. That is impor ;
Sustainability.
We are committed both to the craft tradition and to sustainability. Both are intimately connected. Sustainability is not
an invention of our era, but dates back to
]
;
Z?
&2
7
to the extent that they are reproduced by nature. Today,
sustainability has acquired an ecological, economic and
social dimension.
Craft expertise.
[;{|;|`[Z<33\
You probably know how it works: the more deeply you engage with a
subject, the more you want to know. And you then quickly reach the
with people who share your passion. At the same time, the exchange
with you gives us new ideas for product development. Things can
always be improved. That is part of our profession. You are therefore
cordially invited to participate in one of our workshops.
The programme.
Have you also always thought you would like to bind a book, build a
boat or restore an antique table yourself? Or would you prefer to work
with metal? Cast a bronze, forge silver or plate with gold? With more
than 100 workshops, there are no limits in developing your creativity
and skills. And every workshop ends with a product you yourself have
made. An expression of your creative power.
Your teachers.
In our workshops, international specialists give their best: they
impart the practical craft know-how accumulated over many
years to you. In doing so, they take account of your personal
knowledge level. Whether you participate in an introductory or
=
personal training.
ts
cipan
Parti ve a
recei
NT
SCOU es*
I
D
10% purchas
y
n
on an e duratio
h
t
p
r
o
o
f
orksh
w
a
f
o
Inspiring location.
Our bright and perfectly equipped course workshops are a paradise for any craftsman, with an inspiring environment that promotes creativity and recreation.
WORK
SHOPS
2012
Use this QR code to order our workshop
brochure directly on your smartphone at:
www.more-than-tools.de/workshops
Advice can also be helpful when choosing between the more than 100
workshops we offer. Together, we will identify the perfect one for you.
* except books, DVDs, mashine tools, products from WoodRat
and reduced products.
** 14 cents/min from German landlines / calls from mobiles may cost more.
Frame Saws | 26
Panel Saws | 27
Flush-Cutting Saws | 27
Veneer Saws | 27
Back Saws | 28
Coping Saws | 29
Compass Saws | 29
Saw Accessories| 32
Scroll Saw | 32
Saws
?
#
over the long term.
clusively in the Japanese master black-smiths inspection of every saw blade or the manual
workshops. Saws with interchangeable blades sawing test (spot tests out of each shipment)
Lighter grip
for fatigue-free working
7
Trapezoidal teeth
(crosscut teeth)
stress and cannot warp. The saw kerfs are the- across the grain. The teeth are sharpened on
three sides in alternating fashion to cleanly
>
forces considerably lower.
The advantages of
ORIGINAL DICK japanse saws:
Impulse-hardened tooth-by-tooth
(every saw tooth has the same hardness,
therefore the saw stays sharper for longer)
Replacement blade service
Triangular teeth
Proof of origin
(rip teeth)
Your advantage:
the grain.
10
Saws
Saw test
Saw types:
Dozuki
Kataba
Ryoba
;
;?
Setting
Tooth spacing
Tooth spacing between 1 and 1.5 mm (trapezoid toothing and universal tooth pattern)
Z
$
%
Saws
Setting
Blade thickness
Tooth spacing
#
=7
$
%
#
under tension.
The setting of the teeth allows precise cuts wit- The blade thickness of almost all saws is
hout the side of the blade being in contact with constant from the back of the saw down to
Normal saws
DICK saw
Cheap article
Cheap article
DICK saw
12
Saws
Japanese Saws
Dozuki Saws
Dozuki saws are indispensable for cutting wood joints and making precise crosscuts and shoulder cuts. The
ultra-thin and fine-toothed saw blade allows precise, tear-free cuts and the finest kerfs. The reinforced back
stabilises the blade and makes it less susceptible to breakage, but also limits the possible cutting depth.
Dozuki saws with universal tooth pattern are especially suited for making dovetails and other wood joints.
A
1
Satisfaction
G u ar an t e e
A {;`Z\
The most popular Dozuki:
Standard version for all cuts along,
across and diagonal to the grain. With
traditional wooden handle, light and
breathable, or rubberised power grip,
particularly robust and slip-proof.
Blade length
Overall length ^
Cut depth 50 mm
Blade thickness ^
Setting 0.45 mm
Universal teeth 1.5 mm
Handle material
1 Wooden No. 712808_2 32.90
Handle
Satisfaction
G u ar an t e e
B {;`Z\3~\&'
Handy and compact:
For mobile use or maximum control in
detail cuts across and along the grain.
With traditional wooden handle, light
and breathable, or rubberised power grip,
particularly robust and slip-proof.
Blade length 180 mm
Overall length ^"
Cut depth 45 mm
Blade thickness ^
Setting 0.45 mm
Universal teeth 1.5 mm
Handle material
1 Wooden No. 712110&" 22.90
Handle
Customer Review:
Satisfaction
G u ar an t e e
C {;`Z\;`\#];
Precise results with familiar design:
The closest-ever tooth pitch of a massproduced Japanese saw with universal
&^
suitable for precise and clean cuts along
and across the grain.
G u ar an t e e
Key to Pictograms
Diagonal cuts
Universal tooth pattern for cuts across, along and
diagonal to the grain.
13
Saws
Japanese Saws
A
Satisfaction
G u ar an t e e
A {;`Z\;`\#];
;?
Japanese look:
As well as the closest tooth pitch, this
Japanese saw with universal teeth also
guarantees a long edge life and extreme
hardness. Ideal for clean cuts across and
along the grain.
Satisfaction
G u ar an t e e
B {;=`ZZ
> @77
}
Traditional design for all cutting across
the grain as well as crosscuts and
shoulder cuts.
C
C {3;=`ZZ
For especially fine-cut surfaces:
Standard version for tear-free crosscuts
and shoulder cuts.
Blade length
Overall length ^
Cut depth 50 mm
Blade thickness ^
Setting 0.45 mm
Crosscut teeth 1 mm
No. 712790
^& 41.90
Repl. Blade No. 712890 ' 23.90
^ No. 712871 &&^ 13.50
14
G u ar an t e e
Saws
Satisfaction
Satisfaction
G u ar an t e e
G u ar an t e e
1 Wooden
Handle
2 Power Grip
Repl. Blade
^
B <\Z\[~[;`|`~&
Small Japanese replaceable-blade saws
for all fine wood cuts in model work and
hobby work. The rubberised handle fits
the hand comfortably. For cuts across
the grain.
Blade length 150 mm
Overall length "
Cut depth ^
Blade thickness ^
Setting 0.55 mm
Crosscut teeth &^
No. 712714
& 17.90
Repl. Blade No. 712716
__^ 9.20
Satisfaction
G u ar an t e e
E
1
D {Z~;`
\`{
Standard length for
general use and larger
stock.
Blade length
Overall length ^
Cut depth 50 mm
Blade thickness ^
Setting 0.45 mm
Crosscut teeth 1.5 mm
No. 712809
^2" 38.90
Repl. Blade No. 712909 & 18.50
^ No. 712871 &&^ 13.50
Key to Pictograms
Diagonal cuts
Universal tooth pattern for cuts across, along and
diagonal to the grain.
Satisfaction
G u ar an t e e
E {Z~;`\`{3~\&'
For mobile use or maximum control in
detail work. With traditional wooden
handle, light and breathable, or rubberised power grip, particularly robust
and slip-proof.
Handle material
1 Wooden
Handle
Crosscut
Trapeziodal shaped teeth mainly for cuts across the
grain.
Particle boards
;
materials like particle
boards.
15
Saws
Japanese Saws
Kataba Saws
Because of their thicker blades, the backless Kataba saws are very robust
and allow deep cuts flush to the surface. They are available with different
blade lengths and tooth spacings and are thus highly versatile in cabinetmaking and carpentry.
Satisfaction
G u ar an t e e
A \\<\;`Z\_
Doubly universal:
As well as allowing universal cutting
(across, along and diagonal to the grain),
this Kataba can be transformed into a
Ryoba saw in no time by fitting an additionally available Ryoba blade.
B
Satisfaction
G u ar an t e e
B `;~\;3;`<\<\{;
]`\\<\;`Z\_
With this blade, you can transform your
7_ ` 7 #
sing crosscut and ripcut teeth.
No. 712480
&'_ 17.70
D SILKY\\<\Z<\Z\'
Unrivalled clean cuts:
Robust saw for large cuts in carpentry.
C \\<\=`ZZ
For precise cuts:
Because of the fine crosscut teeth and
the minimum set, this saw produces
smooth, clean and tear-free cuts across
the grain.
Blade length
Overall length 580 mm
Blade width 2
Blade thickness 0.5 mm
Setting 2
Crosscut teeth 1.4 mm
No. 712818
&^ 29.90
Repl. Blade No. 712918 &'' 18.90
^ No. 712871 &&^ 13.50
16
E
E HATTORI
\\<\2
Original Japanese saw
at an entry-level price:
;
#
across the grain.
Blade length 2
Overall length 2
Blade width 2
Blade thickness 2
Setting 0.9 mm
Crosscut teeth 1.7 mm
No. 712655
& 17.90
Repl. Blade No. 712656
_& 8.50
Saws
Satisfaction
G u ar an t e e
A \\<\Z~;;{Z\[2=`ZZ
7@[
#
handle:
The ergonomic pistol-type handle in
Western design allows shoulder and mitre
cuts as well as crosscuts without tiring.
Blade length 2
Overall length ^
Blade width 2
Blade thickness 2
Setting 0.75 mm
Crosscut teeth 1.7 mm
No. 712794
" 24.90
Repl. Blade No. 712894 &&2' 13.90
E
E \\<\=`~
Unbeatable along the grain:
Thanks to the triangular tooth pattern,
this Kataba produces particularly good
results when cutting in the direction
of the grain. The teeth, which get finer
towards the handle, make it easier to
start a cut and less force is required as
the stroke progresses.
Blade length
Overall length 580 mm
Blade width 2
Blade thickness 0.5 mm
Setting 2
Rip teeth @^
No. 712817
&^ 29.90
Repl. Blade No. 712917 &2^ 18.60
^ No. 712871 &&^ 13.50
Satisfaction
G u ar an t e e
C \\<\\`[\^^^=`ZZ
The most popular carpenters saw:
Robust saw for larger dimensions in
carpentry and joining.
\
3?
cutting performance, also diagonally to
the grain
77
D \\<\\~\2=`ZZ
Faster, more precise sawing:
For long cuts on large workpieces, boards
and beams in carpentry.
G u ar an t e e
Key to Pictograms
Diagonal cuts
Universal tooth pattern for cuts across, along and
diagonal to the grain.
D
Curved edge:
<
#
7
=
simply by shifting pressure
Blade length 2
Overall length 2
Blade width 2
Blade thickness 2
Setting 0.85 mm
Crosscut teeth 1.8 mm
No. 712014
" 28.90
Repl. Blade No. 712015 & 14.90
^ No. 712871 &&^ 13.50
Ripcut
Rip teeth - mainly for cuts
along the grain
Crosscut
Trapeziodal shaped teeth mainly for cuts across the
grain.
Wet wood
Best suited for wet and
green wood.
Hollow grinding
Saws with this symbol
have a hollow grinding on
the blade and no setting.
This results in the cleanest
cutting surfaces.
17
Saws
Japanese Saws
Kataba Super Hard
Preferred for cuts across the grain (trimming and shoulder cuts) in exotic hardwoods, as well
as glued wood and particle boards.
[
#
=
$
%=
#
A
Satisfaction
G u ar an t e e
B \\<\Z~;`\`{
The most popular Kataba:
Standard length for general use and
larger stock.
Blade length
Overall length 540 mm
Blade width 2
Blade thickness 2
Setting 0.85 mm
Crosscut teeth 1.7 mm
No. 712204
&^ 25.50
Repl. Blade No. 712205 &^^2 15.90
^ No. 712871 &&^ 13.50
C ZZ\\<\2
Longest edge life:
The HSS blade, which is fitted to an
elastic body, allows cuts across the grain
even in the hardest woods and in particle
boards.
Satisfaction
G u ar an t e e
A \\<\Z~;`\`{3~\&'
For mobile use or maximum control in
detail work. With traditional wooden
handle, light and breathable, or
rubberised power grip, particularly
robust and slip-proof.
Blade length 180 mm
Overall length ^"
Blade width 50 mm
Blade thickness 0.5 mm
Setting 0.8 mm
Crosscut teeth 1.5 mm
Handle material
1 Wooden
Handle
Ryoba Saws
With its two different tooth patterns, the Ryoba saw ensures optimum cutting performance not only across
but also in the direction of the grain, making it the most versatile saw for carpentry and joinery. The thicker
saw blade allows backless control and thus cuts of any depth flush to the surface. Because the teeth become
successively finer from the tip to the tang, it is easy to start a cut and less force is required as the stroke
progresses.
Satisfaction
G u ar an t e e
Satisfaction
G u ar an t e e
18
D `<\3\;
The most popular Ryoba:
The particularly fine crosscut teeth of
this universal saw allow extremely clean
cuts across the grain with good cutting
performance also in the direction of the
grain.
Blade length
Overall length 580 mm
Blade width 84 mm
Blade thickness 0.45 mm
Setting 22
Crosscut teeth &
Rip teeth @^"
No. 712806
"_ 30.90
Repl. Blade No. 712906 &2_ 19.90
^ No. 712851 &^'_ 16.50
Saws
Satisfaction
Satisfaction
Satisfaction
G u ar an t e e
G u ar an t e e
G u ar an t e e
A `<\Z;&
For smaller workpieces:
Because of its small size, this Ryoba
provides maximum control in all detail
cuts across and along the grain.
Blade length &
Overall length 540 mm
Blade width 88 mm
Blade thickness 0.45 mm
Setting 2
Crosscut teeth 1.4 mm
Rip teeth @^"
No. 712803
2& 26.90
Repl. Blade No. 712903 &'' 18.90
^ No. 712851 &^'_ 16.50
B `<\Z;
Highly versatile:
For universal use in cabinetmaking and
carpentry, thanks to high-performance
teeth for cutting along the grain and
medium-fine crosscut teeth for precise
cuts across the grain.
Blade length
Overall length 2
Blade width 97 mm
Blade thickness 0.5 mm
Setting 0.75 / 0.7 mm
Crosscut teeth &2
Rip teeth @^"
No. 712804
_^& 32.50
Repl. Blade No. 712904 &2_ 19.90
^ No. 712851 &^'_ 16.50
Satisfaction
G u ar an t e e
C `<\Z;_
Ideal for carpenters:
High-performance Ryoba for wood joints
as well as trimming cuts and cuts along
the grain.
Blade length _
Overall length 22
Blade width 115 mm
Blade thickness 2
Setting 0.85 / 0.8 mm
Crosscut teeth ^
Rip teeth ^2@'
No. 712805
'" 33.90
Repl. Blade No. 712905 ' 23.90
^ No. 712859 &' 18.80
D `<\Z;^
For large pieces of wood:
The largest Ryoba with aggressive
crosscut teeth and high-performance rip
teeth can even handle strong beams and
planks.
Blade length ^
Overall length 700 mm
Blade width &
Blade thickness 0.7 mm
Setting 1 / 0.95 mm
Crosscut teeth ^
Rip teeth ^2@'
No. 712812
^&' 37.90
Repl. Blade No. 712912 2& 26.90
^ No. 712859 &' 18.80
Spacing
Wedge
Satisfaction
G u ar an t e e
Handle material
1 Wooden
Handle
Particle boards
;
materials like particle boards.
19
Saws
Japanese Saws
Saw Sets
All saw sets come with a jute
tool roll.
A
<\ZZ\[Z=^#~;;Z;
Price advantage
\~\;Z;Z\[Z;{
Price advantage
C
D
1
C
<\ZZ\[Z=#~;;Z;
3~\Z\[Z=^#~;;Z;
Price advantage
Price advantage
1 Wooden
Handle
2 Power Grip
F
F
\`~;`Z\[Z=^#~;;Z;
Price advantage
20
3~\Z\[Z=#~;;Z;
Price advantage
Saws
Deluxe Saws
Our hand-made master saws for the highest demands are aesthetically
pleasing and surprisingly light. Their blades are made in numerous steps
from vacuum-melted White Paper Steel. If required, the through-hardening allows resharpening by hand and also guarantees the maximum
edge life. After hardening, the smith works the blades with a scraper to
A {{;;=
`ZZ
The finest Dozuki:
Hand-crafted saw for highest-precision
cuts, well-suited for fine cabinetmaking
and restoration work. The extremely thin
7$^%
in very little cutting loss. Super-light
wooden handle, rattan wrapped.
Blade length
Overall length 2&
Cut depth 50 mm
Blade thickness
Setting ^
Crosscut teeth 0.8 mm
No. 712213
&_2 151.90
^ No. 712871 &&^ 13.50
B {{;;=`~
;?
7
for true cutting and minute kerfs across
the grain.
Blade length
Overall length 2
Cut depth 45 mm
Blade thickness
Setting ^
Rip teeth 1.5 mm
No. 712250
_&' 85.90
^ No. 712871 &&^ 13.50
C `<\{;;
Ideal saw for exactly fitting wood joints
and precise ripcuts and trimming cuts of
any depth.
Blade length
Overall length 2
Blade width 105 mm
Blade thickness 0.55 mm
Setting _2
Crosscut teeth 1.4 mm
Rip teeth ^@
No. 712001
&^'_ 164.90
^ No. 712851 &^'_ 16.50
D <{;;
Large, well-proportioned hand saw,
available with ripcut and crosscut teeth.
The angled handle allows strong pulling
with both hands.
F {;;]`;Z\[
Fine saw with reinforced back
for fret wire grooves in guitar
fingerboards. The unset crosscut teeth allow tear-free,
straight cuts across the grain.
Cedar wood handle.
Blade length &
Overall length ^
Blade thickness 0.57 mm
Crosscut teeth 1.1 mm
No. 712260
2&^ 54.90
E \;<{;;Z\["
The opposing ripcut and crosscut teeth
are suitable for blind mid-panel cuts,
grooves and dovetail joints. Short blade,
curved edge.
Blade length 90 mm
Overall length 445 mm
Blade width 70 mm
Blade thickness 0.45 mm
Setting 0.7 / 0.9 mm
Crosscut teeth &
Rip teeth ^^
No. 712100
_2 32.90
Key to Pictograms
Crosscut
Trapeziodal shaped teeth mainly for cuts across the
grain.
Ripcut
Rip teeth - mainly for cuts
along the grain.
21
Saws
Quick-Change Saws
Infinite possibilities.
Satisfaction
G u ar an t e e
B \\|\Z];
Ideal saw for fine cuts of any depth
across the grain.
Satisfaction
Satisfaction
G u ar an t e e
G u ar an t e e
A \\|\Z;`Z\_
For cuts across, along and diagonal to
the grain.
#
?77
#
ly to the surface of the workpiece
;?
#
=
in tight spaces
Blade length 170 mm
Overall length ^^
Blade width ^
Blade thickness 0.4 mm
Crosscut teeth 1 mm
No. 712166
^_" 41.40
1
1
D
\{;Z]`\\|\ZZ\[Z
Model
1
2
3
4
E
No. 712983
No. 712486
No. 712981
No. 712982
"
''
"
"
24.90
10.50
24.90
24.90
Z\[<\{;]`\\|\ZZ\[Z
Model
1
2
3
4
_
Z=]
Flush Cut 170
Keyhole Saw 150
No. 712986
No. 712988
No. 712992
No. 712993
&&'
&_&
&^'_
&^^
14.50
17.50
16.50
15.50
3
3
4
4
G u ar an t e e
F \\|\Z;;Z\[&
The long slim blade makes this saw ideal
for cutting holes and curves.
` 7=
?77
;?
#
=
in tight spaces
Blade length 150 mm
Overall length ^
Blade width &@&
Blade thickness 2
Setting 0.8 mm
Crosscut teeth &2
No. 712167
^^" 40.40
Key to Pictograms
Diagonal cuts
Universal tooth pattern for cuts across, along and
diagonal to the grain.
Crosscut
Trapeziodal shaped teeth mainly for cuts across the
grain.
22
Price advantage!
G \\<\\``ZZ_
For cuts of any depth across the grain.
]
7
_&2
;
Blade length _
Overall length 455 mm
Blade width 2
Blade thickness 2
Setting 0.75 mm
Crosscut teeth 1.8 mm
No. 712471
&'_ 21.50
Repl. Blade No. 712481
"'^ 11.70
\\<\\`Z\[Z=#~;;Z;
Flexible use through exchangeable blades:
Quick-change saw with five different saw
blades for multi-purpose use from working solid wood right through to plastic.
Set contains:
7
_@
$ _&_&%
`<}
$ _&'%
$ _&'^%
$ _&'%
77
$ _&'%
No. 712470
2&^ 54.90
Repl. Handle No. 712486
'' 10.50
Saws
Saw Cases
Protect your premium Japanese saws from dust and damage by storing them in
a suitable case and thus improving their tool and edge lives.
B ;\;`\Z;]`{\{
KATABA SAWS
;
=
#
seams, pushbutton closure, slide-in
tongue with hang-up hole.
Size 1
B
Blade length &@&'
Blade width max. 2
No. 712870
&^ 12.30
D ;`#~\Z;
]`\~\;Z;Z\[
4 compartments, natural colour.
Size 1
Blade width max. 70 mm
Outer dimensions 400 x 400 mm
No. 712877
"2 5.90
Size 2
Blade length @_
Blade width max. 70 mm
No. 712871
&&^ 13.50
Size 2
Blade width max. 90 mm
Outer dimensions 2?2
No. 712878
_' 8.90
Size 3
Blade length @^&
Blade width max. 75 mm
No. 712852
&& 14.40
Size 3
Blade width max. &
Outer dimensions 740 x 740 mm
No. 712879
&' 12.90
C ;\;`\Z;]``<\Z\[Z
;
=
#
seems, push button closure, slide-in
tongue with hang-up hole.
Size 1
Blade length &@&'
Blade width max. 75 mm
No. 712858
&&^ 13.50
C
Size 2
Blade length &@
Blade width max. 105 mm
No. 712851
&^'_ 16.50
Size 3
Blade length _@^
Blade width max. &
No. 712859
&' 18.80
F \Z;]`\\|\ZZ\[Z
Convenient transporting:
This cotton canvas saw case holds
several combinations of saws for secure
storage. You can close the case securely
with a push button and/or cord. To prevent damage to the teeth, we recommend
_&"
E \~\;Z;Z\[<\|
Practical shoulder bag with DICK logo.
Ripstop nylon corduroy with adjustable
shoulder strap and compartments for at
least 4 saws up to 75 cm in length. Two
separate pockets for replacement blades.
Without contents.
Max. saw length 750 mm
Outer dimensions _'?&2?2
No. 712895
^_' 28.30
1.90
23
Saws
1
A SILKY WOODBOY
State-of-the-art saws:
The Dozuki and Kataba Woodboy are
suitable for fine cuts across the grain.
B SILKY
\\\]{|Z\[_=];
` 7@
}
C ;`Z]{|Z\[
Z&
Folding saw offering good value for
money for cuts across the grain. The soft
rubberised metal handle provides a comfortable grip. Hard-chromed (rustproof)
blade.
Blade length &
Overall length 450 mm
Blade width ^2
Blade thickness 1 mm
Setting 1.15 mm
Crosscut teeth 1.4 mm
No. 712118
&" 22.90
Repl. Blade No. 712119 & 14.90
24
D ;`Z\[&&
Whether in the workshop, on the building
site or on the go, the impulse-hardened
tooth tips of the high-quality quickchange blade ensure excellent cutting
performance in wood and particle boards.
When required, the saw blade can be
replaced quickly and easily with conventional cutter blades.
Blade length &^
Overall length ^
Blade width 18 mm
Blade thickness 0.45 mm
Setting 0.5 mm
Crosscut teeth &^
No. 712150
&' 12.90
Repl. Blade No. 712151
2 6.50
Saws
A
B
A `3]{|Z\[=
\`Z;
Optimum cutting performance in wet
wood, both across and diagonally to the
grain.
#
=
7
` 7#
rubber coating
Blade length
Overall length 510 mm
Blade width ^
Blade thickness 0.8 mm
Setting 1.15 mm
Crosscut teeth _@^2
No. 712754
^&& 36.90
Repl. Blade No. 712755 &2_ 19.90
C SILKY<|<]{|Z\[^2=
3;{3
[^2=<<
the longest blades of all folding saws. It
is ideal for cuts across and diagonal to
the grain in large beams in carpentry.
SILKY\\\_=#~;;Z;
Set contains the following products:
_&_^'Z Oyakata Folding Saw
_=
_&_"`<
Z
_=
No. 718965
_ 89.90
B SILKY\\\]{|Z\[_=
\`Z;
The most universal folding saw:
Robust folding saw with excellent cutting
performance for larger sections (carpentry), insulation material and pruning fruit
trees. Cuts across and diagonally to the
grain - also in wet wood.
Price advantage!
Key to Pictograms
Dry wood
Best suited for dry wood.
D
D SILKY~;<&_=\`Z;
Whether on the building site, in the workshop or for outdoor use, this compact
folding saw with its razor-sharp teeth
runs rings around many large saws.
For crosscuts and ripcuts.
Wet wood
Best suited for wet and
green wood.
Crosscut
Trapeziodal shaped teeth mainly for cuts across the
grain.
E
General pruning
These saws allow quick cuts
to the disadvantage of less
smoother surfaces.
Fruit tree pruning
Slightly set saws offer
smoothest surfaces which
minimises the risk of fungal
or bacterial diseases.
Hollow grinding
Hollow grinding on the
blade and no setting.
This results in the
cleanest cutting surfaces.
Foamed materials
Used to cut foamed and
insulation materials.
25
Saws
Frame Saws
Frame Saw Classic with Japanese Saw Blade
7;
ting quality. Both the frame and the saw blades are produced exclusively
for DICTUM. The ergonomically curved cheeks and knobs are made of
precious wood with finely sanded, oiled and polished surfaces. The cedar
stretcher lowers the weight of the saw and reduces vibrations.
C ]`\3;Z\[\ZZ=
;`Z\
For precise wood joints:
With Turbo-Cut universal blade.
Blade length 500 mm
Blade width 40 mm
Blade thickness 2
Setting 0.85 mm
Universal teeth 1.8 mm
Outer dimensions ^2?'
Weight 800 g
No. 712962
2"& 82.60
A
A ]`\3;Z\[\ZZ=
;`Z\
Handy saw for precision work.
With Turbo-Cut universal blade.
Blade length 400 mm
Blade width 40 mm
Blade thickness 2
Setting 0.85 mm
Universal teeth 1.8 mm
Outer dimensions ^?_
Weight 550 g
No. 712968
2 71.90
C
B ]`\3;Z\[\ZZ=|
For precise curve cuts.
With Turbo-Cut jig blade.
Blade length 400 mm
Blade width 10 mm
Blade thickness 2
B
Setting 0.85 mm
Crosscut teeth 1.8 mm
Outer dimensions ^?_
Weight 550 g
No. 712969
2 71.90
D ]`\3;Z\[\ZZ2=
;`Z\
The most popular frame saw:
With Turbo-Cut universal blade.
Blade length 2
D
Blade width 40 mm
Blade thickness 2
Setting 0.85 mm
Universal teeth
Outer dimensions ^2?"
Weight 800 g
No. 712964
_& 85.80
E ]`\3;Z\[\ZZ_=
;`Z\
Ideal for use in carpentry:
With Turbo-Cut universal blade.
Blade length 700 mm
Blade width 40 mm
E
Blade thickness 2
Setting 0.85 mm
Universal teeth
Outer dimensions 410 x 1000 mm
Weight 1100 g
No. 712965
_2^ 90.80
26
F ;`Z\<\{;
No. 712971
&'^ 21.80
Crosscut blade
For the cleanest cuts across
the grain. Trapezoidal tooth
pattern.
;`Z\<\{;
No. 712956
_2 24.70
Ripcut blade
For cuts along the grain.
Triangular tooth pattern.
Jig blade
For all precise curved cuts.
Trapezoidal tooth pattern.
G |<\{;
No. 712972
&'^ 21.80
;`Z\<\{;2
No. 712957
^ 27.90
`ZZ<\{;2
No. 712950
^_ 28.20
`~Z\[<\{;2
No. 712951
^_ 28.20
;`Z\<\{;_
No. 712958
2^" 31.40
Saws
Panel Saws
A TURBO-CUT HAND SAW
;?#
7}
;
#
7
precise cutting at breathtaking speed.
2
=7
ground to cut on the pull stroke as well
`
#
$
%7
7
$
_&'%
Z
#
1 Turbo-Cut Hand Saw 330
Overall length
Blade length ^^
A
Blade width ^@&
Blade thickness 0,8 mm
Setting 1.05 mm
Crosscut teeth
No. 712090
^22 43.50
Flush-Cutting Saws
Japanese flush-cutting saws are ideal for cutting dowels, pegs,
tenons etc. flush to the surface of the piece without damaging
its surface. Flexible blades with un-set teeth, limited cutting
depth.
D
B
Un-set teeth
No damage on the surface.
Set teeth
Scratches on workpiece surface.
C
C FLUSH-CUTTING SAW
KUGIHIKI 190
Traditional Japanese saw:
Professional Kugihiki with
extremely thin and flexible blade.
Traditional design with wooden
handle wrapped in rattan.
Blade length 190 mm
Overall length 510 mm
Blade width 40 mm
Blade thickness ^
Crosscut teeth 1 mm
No. 712303
^2 42.90
Veneer Saws
E `<\`;Z\`&
This compact Japanese saw with two
different tooth spacings and an ultra-thin
blade is the first choice for the finest
cuts in tight spaces and cutting off
dowels or other projecting wooden parts
flush with the surface. Japanese red
beech handle.
Blade length &
Overall length _
Blade width ^
Blade thickness ^
Crosscut teeth &&^
E
No. 712123
&2_ 19.90
G |;`3\;;;`Z\[_
Veneer saw made in Germany with
cranked handle and double-edged, un-set
saw blade. Triangular tooth pattern for
push and pull strokes.
Blade length 75 mm
Overall length 195 mm
Blade width 50 mm
Blade thickness 0.5 mm
Setting 0.55 mm
Rip teeth &2
No. 703810
"&2 10.90
Repl. Blade No. 703811
2 6.50
F \\<\`;Z\`&
Compact Japanese saw for fine repair
cuts, also ideal for working in tight
spaces or cutting off dowels. The unset
crosscut teeth ensure clean cuts, while
the thin blade minimises kerf wastage.
Blade length 100 mm
Overall length
Blade width
Blade thickness ^
Crosscut teeth 1 mm
No. 712309
&2 19.30
27
Saws
Back Saws
Finger Position
A SILKY MINI SAW 150
Multi-purpose Japanese compact saw
with tip-hardened special tooth pattern,
for cutting on the push and the pull.
Also suitable for children. Slip-proof,
rubberised handle, reliable blade locking
mechanism.
Blade length 150 mm
Overall length 2
Blade width 45 mm
Blade thickness 0.5 mm
Setting 0.85 mm
Rip teeth 1 mm
No. 712490
' 23.90
Repl. Blade No. 712493 &^' 15.80
B <\Z\[]`\`{[{&2
Small saw that cuts on the pull stroke for
fine detail work in model-building, making musical instruments and restoration
work. Unset saw blade with reinforced
back.
Blade length &2
Overall length "
Cut depth ^
Blade thickness ^
Rip teeth 0.9 mm
No. 712710
&" 22.90
Lie-Nielsen Saws
Sharpened by hand:
Western saws of exceptional quality, optimised for specific uses. The blade teeth of Swedish spring steel are
D ;#;Z;;Z\[
This backsaw with a large saw blade is
perfect for deep cuts in the direction of
the grain, such as cutting mortise and
tenon joints. The well-balanced saw cuts
efficiently on the push stroke and without
jamming up to a depth of 10 cm.
Blade length 405 mm
Overall length 540 mm
Cut depth 105 mm
Blade thickness 0.5 mm
Setting 0.8 mm
Rip teeth ^
No. 712026
&'' 189.00
28
F ;#;Z;{;\Z\[Z
Precise, efficient back saws that produce clean cuts. Crosscut teeth that cut on the
push stroke, especially for dovetail joints. The minimum set makes it easier to saw a
straight line.
Thin Plate Dovetail Saw
;?
#7
Dovetail Saw
accurate kerfs.
Standard blade thickness.
Blade length
Blade length
Overall length ^'
Overall length ^'
Cut depth ^
Cut depth ^
Blade thickness 0.4 mm
Blade thickness 0.5 mm
Setting 0.5 mm
Setting 2
Rip teeth 1.8 mm
Rip teeth 1.8 mm
&&" 136.00
No. 712025
&&" 136.00 No. 712028
Saws
Coping Saws
A GLARDON / \`<;
COPING SAWS
Precision coping saws for professional use:
High-precision, professional coping saw
by Swiss manufacturer Glardon/Vallorbe.
Perfect for intarsia, mother-of-pearl or
goldsmith work and other artisan and
precise mechanical applications. Comes
without blade.
4.50
3;{3;;
Blade width 0.58 mm
Rip teeth 0.5 mm
Blade thickness '
Setting ^
No. 712523
^&&
\`Z;;;
Blade width 0.94 mm
Rip teeth 0.8 mm
Blade thickness 0.4 mm
Setting 0.48 mm
No. 712524
^
3.70
~;|\Z~;{~|Z\[<\{;Z=
Z~#=2~;;Z
Coarse toothing, suited for diverse materials ranging from wood, to plastics, and
to ferrous and non-ferrous metals.
]]
_&&
];;;
Blade thickness 0.7 mm
No. 712530
^'_
4.60
3;{3;;
Blade thickness 0.75 mm
No. 712531
^'_
4.60
\`Z;;;
Blade thickness 0.85 mm
No. 712532
^'_
4.60
4.10
B \~\;Z;~|Z\[
With its great depth, this Japanese
coping saw is perfectly suited for deep
^
7
;?
#
Z77
turning the handle
#
>
#
can be locked in four positions
Z
|
7
can be used as replacement blades
Blade length &^
Overall length ^
Blade width 1 mm
Rip teeth 0.8 mm
Blade thickness 0.4 mm
Setting 0.5 mm
Jaw depth
No. 712517
&^ 29.90
Freeway
` 7
Z7
<
7
_&&
Blade length &2
Blade width
Blade thickness 0.5 mm
No. 704845
&
2.50
Compass Saws
With long, slender Japanese blades for making holes and curved cuts and working in confined spaces.
29
Saws
A <;{<;3`;Z\[\3#
~&'Z;
The all-rounder:
Precise, versatile mitre saw made in
Sweden with solid aluminium body, exact
saw blade guides, and a guide that can
be locked at any angle with additional
fixed stops (see figure). Comes with saw
7
_&^2
high-performance Japanese saw blade
_&^\
#'=
D Z-SAWZ\[|{;
;?
}
This saw guide is fully adjustable in
mitre and angle of inclination, making
highly accurate cuts of battens, frames
and joints.
C
B Z\[<\{;]`<;{<;
3`;Z\[\3~&'
C `<#3`;Z\[<\{;
Razor-sharp and with premium cutting
quality, this Japanese Turbo Cut blade
severs even the hardest woods and
ensures exact joint surfaces in frames,
battens and squared timber.
7
7
trimmed or bevelled easily
\7
##
` 7
=
sliding fence, Allen key and instructions
Z7
7#
#2=7
ZZ _&_"
No. 712460
^"& 46.90
Mitres
Polygone
E Z-SAWZ\[|{;Z;=3
For right-angled trimming of squared
timber and battens, as well as precise
3
7
angle with the setting gauge and a screw
clamp. With the length stop in place, its
even possible to cut boards and panels
precisely by hand.
Z
}3
7 "
== =
setting gauge, Kataba Mini saw
$ _&2_%
No. 712464
^2 42.90
Inclination angles
Aluminium
body
Precision
guide designed to fit
the Kabata
Mini saw
F Z\[|{;Z;
~
$ _&2%
7ZZ2$ _&_"%
No. 712461
^' 65.90
30
Price advantage!
Lap joints
Saws
A ;`\Z{;\Z\[|{;
ZZ;3
For amateurs and experts:
;# #
dovetail joints.
Tails
Pins
2
Angle
^"" 47.50
^"" 47.50
B \{[`3;\&
Metal saw with Japanese look:
Fine saw for non-hardened
metals and hard plastics.
The rubber handle provides a
comfortable and secure grip.
Replaceable blade. Can also
be used with blade for wood
$ _&_&2%
Blade length 150 mm
Overall length "
Blade width ^
Blade thickness ^
Setting 2
Rip teeth 0.9 mm
No. 712715
& 16.90
Repl. Blade No. 712704
_& 8.50
C Z3\3;\Z\[
For cuts in hard-to-reach
places, ideal for the tool
bag. The saw blade
integrated into the handle
can be pulled past the
small clamp, making flush
cuts possible. Sturdy
die-cast aluminium.
saw blade.
Blade length "@
Overall length ^_
Blade width &
Blade thickness 2
Setting 0.9 mm
Teeth per inch
No. 703812
&&& 13.70
F \`{3\;`\Z\[Z;;
Specially designed saw for cutting brass, F
copper, aluminium, hard plastics, and
plated materials (plasterboard).
D 3;\~|Z\[
Robust professional quality:
Universal use for cutting metal and plastics. You can pre-tension the blade with
a sliding spring-loaded cylinder guide
at the top end of the handle. The two
clamping pins ensure that the saw blade
rests securely and does not slide off the
pins when tensioned.
Accessories and
replacement parts
E `;~\;3;<\{;Z]`
3;\~|Z\[
Japanese top quality, long edge life
and sharpness. HSS steel.
#~Z
Blade length ^
Teeth per inch
18
^
No. 712544
No. 712546
_'
_'
8.90
8.90
G Z\;`
The expert for insulation material:
The serrated blade of high-strength,
#
$2` %
is particularly suitable for insulating and
foamed material, polystyrene, felt and
cardboard.
Blade length
Overall length ^'
Blade width ^
Blade thickness 0.9 mm
No. 710751
&" 22.90
Key to Pictograms
Metal
Mainly for metal materials
Plastic
;
materials
Foamed materials
Used to cut foamed and
insulation materials.
31
Saws
Saw Accessories
B {\3{Z\[];
Saw file with wear-resistant, diamondcoated surface, especially for very hard,
tip-hardened teeth.
Cross section '
Width
Cut length 100 mm
No. 712802
'" 33.90
C
D
C Z\[];Z
Diamond-shaped precision files for
sharpening Japanese saw blades without
tip-hardened teeth (Deluxe saws with
full-hardened, non-exchangeable blades).
Single cut.
A Z\[Z;~;`Z
For Japanese and Western saws with
adjustable depth stop for settings of
_@{
#
ments can be adjusted by turning the
depth-stop plate with its spiral-shaped
increasing bevel.
Cut Fine
Cross section ^
Width
Cut length 100 mm
No. 712814
'' 10.50
& 12.50
D `\|\`Z\[];Z
Triangular files with round edges for shar;
#
edges maintain the slightly rounded
7
prevent cracks between the teeth (sharp
angles crack more easily than curved
transitions). Single cut.
Width 6 mm
Cut length 150 mm
No. 712810
5.30
Width 7.5 mm
Cut length 150 mm
No. 712811
5.30
Scroll Saw
E ;|;` Z`Z\[3#Z;
Hegner precision saws are considered
the best on the market. The continuously rated motor with electronically and
progressively adjustable speed regulation
allows you to cut wood, metal and plastic
effortlessly and precisely.
&[
=^=@&
=
^
;?
7
speed-lock mechanism and adjustable
saw blade tension
Z
7
&"
&
<7
=7
surface precision-ground
7$^?^%7
&=
~2=2
[? =^
Includes:
\
>7$_2%=
#7_=
#7=
1 special clamp for internal cuts,
1 plastic table insert,
>
=
1 set operating tools,
detailed instruction manual.
No. 704805
_"_' 949.00
~;|\Z~;{~|Z\[<\{;Z=
SKIP-TOOTH
;?
7=
woodworking. For manual and machine use.
Skip-tooth profile:
~
[=
\
~
&Blade length &^
Blade
thickness
Blade
width
^
^
0.40 mm
0.50 mm
0.80 mm
0.90 mm
1.00 mm
1.40 mm
&2
No. 704820
No. 704821
No. 704822
No. 704823
No. 704824
&_2
&'
&"^
&
F SIMPLY WOOD
In Simply Wood, South African Roshaan
Ganief shows the artistic side of using a
scroll saw. The book presents numerous
patterns that are easy to copy and can
also be customised in your own creative
way. From coasters to panels for framed
furniture to framed wall art, this book
contains numerous exceptional projects.
199 pages, many colour photographs and
=~
7=&"?^
No. 713913
&^"^ 14.90
32
2.10
2.20
2.30
2.40
2.50
F
Western Type | 34
Striking Chisels | 34
Finishing Chisels | 36
Japanese Type | 37
Striking Chisels | 37
Finishing Chisels | 42
Hybrid Type | 44
Chinese Type | 45
33
Chisels
A Tang chisels:
Ferrule
Hoop
Tang
Socket
Hoop
Steel ferrule
77
7 7
Tang
C
Western Type
Striking Chisels
Two free sharpenings.
A
A ;#;Z;Z;Z=
#~;;Z;
{;
on, these perfectly finished chisels from
Thomas Lie-Nielsen are the ideal tools
for joinery, fine carpentry or musical instrument making. The socket shafts ensure
a firm, comfortable grip, the long sharp
blades make it possible to cut and finish
deep mortises and to perfect edge work.
2
B ~];Z;Z
Traditional quality:
Precision-made chisels with a traditional
design. Forged from a chrome/vanadium
steel alloy, heat-treated in an electric
furnace, then ground and polished by
hand. The high quality of these chisels
is exemplified by their uniform hardness
$
?2`%
fine mirror polish. The blades come
pre-sharpened, ready to use, and fitted
with unvarnished hornbeam handles.
1 Single chisel
Blade length "@&
Overall length 2@'
Blade thickness @
Blade width
4 mm
2
8 mm
10 mm
&
&2
2
^
^
^
40 mm
34
No. 700950
No. 700951
No. 700961
No. 700952
No. 700953
No. 700954
No. 700956
No. 700957
No. 700958
No. 700959
No. 700962
No. 700963
&^
&^
&
&
&'_
&"
&2_
&'"&
'
2&
"
16.70
16.70
16.90
16.90
17.70
18.20
19.90
22.50
23.90
24.30
26.90
28.90
2 6-piece set
2#
beechwood case:
2&&&22
No. 700997
&&2'& 139.00
Price advantage
6-piece set
2#
}
2&&2^
No. 700960
&&_2 144.90
Chisels
Satisfaction
Chisels
G u ar an t e e
Chrom/Vanadium-steel chisels
with high carbon content
$"#2`%}
;
Guaranteed long life
A
Satisfaction
A
Z;
Z`~\;`
The short chisels are perfect for close,
accurate work. They are particularly
popular in the UK and USA. The large,
impact-resistant handles are designed for
use with a mallet.
G u ar an t e e
1 Single chisel
Blade length _@'
Overall length @^
Blade thickness ^@2
Blade width
2
10 mm
&
&2
2
No. 701390
No. 701391
No. 701392
No. 701393
No. 701394
No. 701395
"&2
"_
"_
&
&'
&&&
10.90
11.60
11.60
12.20
12.90
13.70
G u ar an t e e
DICK Chisels
Satisfaction
B
Z;
|~\;`
;
reinforced ferrule, long blade, and long
handle.
G u ar an t e e
1 Single chisel
Blade length "@&
Overall length 2@'
Blade thickness ^@2
Available October 2012
Blade width
2
10 mm
&
&2
2
No. 701380
No. 701381
No. 701382
No. 701383
No. 701384
No. 701385
"22
&
&
&"
&&&
&_
11.50
12.20
12.20
13.00
13.70
14.60
35
Chisels
A \#3;\Z;=#~;;Z;
Nothing is impossible with this chisel:
These robust tools are not only great for
reworking timber joints, but are also suited for occasional prying and for evening
plaster. Their red colour means they can
be identified and found with ease. The
high chromium content and a hardness
2#2`
for a strong and reliable tool. The neck
Finishing Chisels
B
B ~];~\`|Z;Z=
2#~;;Z;
These perfectly shaped paring
chisels of chromium/vanadium steel,
?2`=
ideal for finishing wood joints. With its
oval shape, the octagonal oiled elm-wood
handle provides a comfortable, non-slip
grip. Its trapezium profile, created by
the bevelled sides, means you can use
the chisel in mortises or for finishing
dovetails without damaging the edges.
Comes in a tool roll.
Blade width 2&&&22
Blade length 100 mm
Overall length 2
Blade thickness ^@
No. 730030
&^^ 147.00
C ~];3Z;Z=
#~;;Z;
Handy and neat:
These compact chisels made of chrome/
$2`%
work very closely and precisely on the
workpiece. They are therefore ideal for
cleaning up fittings, fine wood joints
and all other kinds of detailed work and
can also be used for sculpting. Spherical
handles made of smoked native robinia
with brass ferrule, hand-polished blades
and a maple wood storage block make
this set a real eye-catcher. An ideal gift
for people with a passion for wood.
Blade width 2&&"
Blade length 2
Overall length 150 mm
Blade thickness ^@
No. 700994
_2"_ 91.60
D
1
E
2
36
E CROWNZ;[Z;Z
Single-bevelled, skew-ground
chisels, made of alloyed tool steel
(approx. 58 HRC).
Rosewood handles.
Blade width &^
1 left
2 right
F CROWN`;`Z;
For right-angled finishing of corners and
mortises. Precisely milled blade made of
carbon-steel (55 HRC). Rosewood handle.
Cut length 10 x 10 mm
Blade length 110 mm
Overall length
No. 701158
"' 59.00
Chisels
Japanese Type
cally, comfortably and precisely.
{ 7=#
Wherever absolute precision is
ting depth is increased to almost
required, when working even the
7
7
twice the blade length.
hardest of woods, Japanese chisels
fractures in the double-layered
(Nomi) are the first choice. The
blade and dampens the force of
7
meticulous workmanship with which
the strike.
blade and handle for max.
they are made, the multi-layered,
force transmission.
ultra-sharp blades, the outstanding
7 #
edge life, and of course the compact
steel is extremely hard-, unless
=
design, allow you to work ergonomi
=2#2^`
Japanese hardwoods.
\7
7 #
low-ground, the contact surface is
reduced, which in turn decreases
the friction and the necessary
cutting force.
Z
7
ends, and are designed for
efficiency when driven by an
iron hammer.
Finishing Chisels
A 33;3=Z;Z
With skillful
handling of fire
and iron, the
master blacksmith Akio
Tasai lends this
highly aesthetic
chisel a woodlike structure
(Mokume). The
folds appear
on the surface
like a relief,
and make each
piece unique. Cutting edge of Blue Paper
Steel. With forged ferrule and hoop, the
handle is made from selected sandalwood.
1 Single chisel
Blade length 2
Overall length
Blade thickness 2@_
Blade width
9 mm
&
18 mm
^
^2
No. 718950
No. 718951
No. 718952
No. 718953
No. 718954
No. 718955
&22^"
&'^&"
'
"&
'2
__
198.00
218.00
239.00
273.00
289.00
324.00
Price advantage
2 6-Piece Set
2#
}
"@^2
No. 718960
&'2_ 1,524.00
Conical section:
style ones?
?7
impact is transferred to
Tang:
There is no difference
steel ferrule.
of the hammer.
37
Chisels
Blade width
1 Single chisel
Blade length 2
Overall length
Blade thickness @_
^
2
9 mm
&
15 mm
18 mm
^
^2
No. 710160
No. 710161
No. 710162
No. 710163
No. 710164
No. 710165
No. 710166
No. 710167
No. 710168
No. 710169
^_&
^_&
^_&
^&"
^_
&"
^^
2^
22^"
41.30
41.30
41.30
50.50
51.40
52.80
60.80
63.10
74.20
79.00
Satisfaction
B
`;3=
Z;Z
;
#
}
These chisels are hand-made in a
Japanese master forge and have a cutting
^
^
composition similar to White Paper Steel
and therefore takes a very fine edge. It is
however considerably tougher which reduces the risk of chipping when working
in knotty wood. The extra-long handle
of Japanese white oak optimally absorbs
impact and its oiled surface provides a
very comfortable grip.
G u ar an t e e
1 Single chisel
Blade length 2
Overall length
Blade thickness @2
Blade width
^
2
9 mm
&
15 mm
18 mm
&
^
^2
1
JAPANESE CHISELS
No. 710320
No. 710321
No. 710322
No. 710323
No. 710324
No. 710325
No. 710326
No. 710327
No. 710328
No. 710329
No. 710330
'"
'"
"^^
^"
^&&
^^&"
^^
^22
^'
_2
Integral design
The neck is seamlessly integrated in the handle
and absorbs the shocks of the hammer blows, against fracture when struck with the hammer.
forge-welded with a thin layer of extremely
hard carbon-steel (with the exception of HSS
Hollow-ground back
scale.
Tapered blades
38
33.90
33.90
34.90
36.80
36.90
39.50
40.50
43.60
45.50
48.50
50.50
Chisels
1
A `;3=Z;Z
For the professional:
Professional-quality forged chisels from
a Japanese master workshop. Ideal for
wood joinery and high-precision work.
Cutting edge of White Paper Steel.
Japanese red oak handles with solid steel
hoops.
1 Single chisel
Blade length 2
Overall length
Blade thickness @2
Blade width
^
2
9 mm
&
15 mm
18 mm
&
^
^2
No. 710129
No. 710130
No. 710131
No. 710132
No. 710011
No. 710133
No. 710012
No. 710134
No. 710135
No. 710013
'"
'"
^&_
^_
^^_
^_^
^'
&"
__
2&^
33.90
33.90
35.90
38.40
40.90
44.30
45.50
48.90
50.90
54.90
B \\3=Z;Z
Ready to use, ideal for beginners:
Well-crafted chisels with durable doublelayered blades (milled steel).
Waxed handles of Japanese red oak
with pre-fitted ferrules.
1 Single chisel
Blade length 58 mm
Overall length
Blade thickness @2
Blade width
^
2
9 mm
&
15 mm
18 mm
^
^2
No. 710780
No. 710781
No. 710782
No. 710783
No. 710784
No. 710785
No. 710786
No. 710787
No. 710788
No. 710789
&_^"
&_^"
&_^"
&_^"
&_^"
&'_
&"'^
&^
2&
^_
20.70
20.70
20.70
20.70
20.70
21.50
23.60
25.40
26.90
29.00
Set up tips:
Nomi do not come ready to use
(except the HSS and Tataki models).
They must first be sharpened and
finished. We recommend using Japanese waterstones. For high-precision
applications, the back of the blade
should also be flattened prior to use.
This can be done using a
steel plate and SiC powder
or a diamond stone. The
ferrule on the butt end of
the handle should also be
driven down prior to use so
that the hammer only makes contact with the wood
when striking the chisel.
Detailed instructions are
included with every chisel.
C HATTORI Z;Z
Great value-for-money Japanese chisels
$ 7#
=2
Rockwell) in a kiri-wood case. Handles
made of Japanese red oak.
39
Chisels
HSS Chisels
Ready to use, robust and razor sharp:
These powerful chisels made of extremely hard HSS steel offer excellent sharpness and a long edge life. Very
$
?22` % =
7
7
;
7
hardness of the steel. The extra-long handles are made of Japanese red oak and have pre-fitted, forged steel
ferrules.
Blade width
A ZZZ;Z
]`\<;3\;`Z
Ideal for joinery and on-site
restoration work. Normal blade length
available in all standard chisel sizes.
Single chisel
Blade length 2
Overall length
Blade thickness @2
^
2
9 mm
&
15 mm
18 mm
^
^2
No. 718930
No. 718931
No. 718932
No. 718933
No. 718934
No. 718935
No. 718936
No. 718937
No. 718938
No. 718939
^^^
^^^
^^^
^^^
^^^
^^^
^&^
^2'"
^'_
&'
39.90
39.90
39.90
39.90
39.90
39.90
41.80
43.90
45.90
49.80
Price advantage
6-Piece Set
2#
}
2"&&'^
No. 718940
&' 264.00
Price advantage
2 10-Piece Set
10-piece set in a leather tool roll:
^@
No. 718941
^2 429.00
Precision chiselling:
Due to their wedge-shaped
bevel, chisels tend to drift
towards the back of the blade
when struck.
Therefore, in precision work,
you should not chisel right
along the mark.
Work with a clearance of 1 to
=
then do the finishing work.
B ZZZ;Z
]`\`~;;`Z
For heavy-duty restoration and joinery
;?
# 7
#
forced necks and thicker blades for deep
mortise holes and large stock.
1 Single chisel
Blade length 80 mm
Overall length "
Blade thickness 2@'
Price advantage
3-Piece Set
^#
}
&^
No. 718870
&2'' 200.90
Blade width
40
15 mm
^
48 mm
No. 718871
No. 718872
No. 718873
No. 718874
No. 718875
'22
2
2
_^'_
57.90
62.40
66.70
77.40
87.90
Chisels
A HATTORI\`~;;`Z
Z;Z=#~;;Z;
Four sturdy chisels with extra-long blades
made of milled steel (double-layered)
for joinery and restoration in carpentry.
Handles made of Japanese white oak.
In a wooden case
Blade width &'^
Blade length 85 mm
Overall length "
Blade thickness 9 mm
No. 710850
& 169.00
B 3`Z;Z;ZATSU-NOMI
Hand-forged in master workshop:
Hand-forged, solid mortise chisel of
White Paper Steel with extra-long handle,
ideal for deep mortises. With its blueannealed steel ferrule, the slim blade
seamlessly joins the long handle.
A forged steel hoop protects the wood,
even against the
strongest forces.
Blade length 95 mm
Overall length "
Blade thickness &@
&^
Blade width
'__ 98.50
''& 104.90
"^&" 110.90
C 3`Z;Z;Z
These heavy chisels are
used to make or rework the guides of
Japanese sliding doors (Shoji) and
partition walls. The double-layer blade,
laminated with White Paper Steel, has
a square cross-section that is tapered
towards the end of the blade and regains
its original dimension just before the
steel ring of the handle. This creates a
support area that ensures guidance even
in deep mortises and prevents damage
to the edge of the hole. Handles made of
white oak.
Blade length 80 mm
Overall length 2
Blade thickness _@&
Blade width
2
9 mm
&
15 mm
18 mm
No. 710175
No. 710176
No. 710177
No. 710178
No. 710179
^2
^"'
^""
&"^
^"
43.50
46.50
47.50
49.90
52.30
Lifetime sharpening.
Two free sharpenings.
Western ones?
In Japan, handles are not regarded as all that their tools based on the steel and the ergonoimportant. Instead it is the forged part of the mics of the handle. When a chisel has been
7
=
#
with the tool, getting to know its function and the hoop. Normally at this point you should
remove the hoop, then remove the burr and
construction. This holistic approach often
seems strange to Western craftsmen because
41
Chisels
Finishing Chisels
A {;\Z;Z
For light-duty use,
e.g. finishing of
finger joints and
dovetails. Thin
blades, triangular
cross-section,
finely ground right
to the edge. Cutting edge of White Paper
Steel. Handles made of Japanese red
oak.
1 Single chisel
Blade length 55 mm
Overall length
Blade thickness ^@2
Blade width
^
2
9 mm
&
18 mm
No. 710260
No. 710261
No. 710262
No. 710263
No. 710264
No. 710265
^^^
^^^
^'_
^2^
_"
39.90
39.90
41.50
43.20
47.90
53.30
Price advantage
2 6-Piece Set
2#
}
^@
No. 710268
^2&^ 281.00
C
B \~;`;{Z;Z
Chisels with tapered blade,
ideal for undercutting in joinery and for
cleaning corners. Cutting edge of White
Paper Steel. The handles are made of
Japanese red oak and have forged steel
hoops.
Blade length 2
Overall length ^
Blade thickness @_
Blade width
^
9 mm
&
15 mm
18 mm
&
No. 710210
No. 710211
No. 710212
No. 710213
No. 710214
No. 710215
^"
^"
^"
^2&^
^2"_
^_'
42.00
42.00
42.00
43.00
44.00
45.00
C 3Z;Z
;# #
in fine cabinet-making, in restoration,
and in making musical instruments.
Double-layered (milled) steel, Japanese
red oak handle.
Blade width
&2' 25.80
&2' 25.80
1.) The end with the
larger inside diameter
Construction of hoops
a piece of hardwood.
7
hammer.
=
%{
=
^%{
the handle.
42
Chisels
1 Single chisel
Blade length 70 mm
Overall length 2
Blade thickness ^@
Blade width
^
2
9 mm
&
18 mm
No. 710108
No. 710109
No. 710101
No. 710104
No. 710102
No. 710103
&^
&^
&^
_"
"&2
^
49.30
49.30
49.30
53.30
58.50
64.30
C `\;{~\`|Z;Z
Cranked blade made of
White Paper Steel for cleaning grooves
and recessed surfaces. Triangular blade
cross-section. Handles made of
Japanese red oak.
Blade length 70 mm
Overall length ^^
Blade thickness 7 mm
Blade width
9 mm
15 mm
18 mm
No. 710156
No. 710157
No. 710158
No. 710159
_
_^'_
__^
'2
83.60
87.90
91.90
101.70
43
Chisels
A SLICK
Hand-forged slick for making beam joints
and for finishing work. Double-layered,
well-proportioned blade with a cutting
B HATTORI SLICKS
Well-proportioned, wellbalanced slicks with double-layered
blades (milled steel) and a long edge
life. The handles are made of Japanese
white oak.
Blade width
2^'_ 76.00
_&^ 85.00
forms unevenly,
=
it appears as if a crack
had formed.
Hybrid Type
Hybrid chisels are a hybrid form of Western design and Japanese technology. They combine the benefits of
both tool cultures and are designed for craftsmen who appreciate the Japanese construction but do not want to
forego the Western design.
C
C DAMASCUS HYBRID
Z;Z=2#~;;Z;
Japanese steel quality Western blade form:
7
#
{
(Suminagashi), laminated with Blue
~
Z$
?2&`%= standing endurance, even on the hardest
woods. With its integral design, the hefty
handle of Japanese red oak, with a strong
heavy-duty ferrule, transmits the highest
44
Chisels
A <`{Z;ZWITH LONG
<\{;Z
These chisels come in a completely
Western design with a long blade of
vanadium-alloyed steel for high durability
$
?2&`%{
design, the long, hefty handle of Japanese red oak with a strong hoop transmits
even the highest impact. The back of the
blade is flat (not hollow-ground).
1 Single Chisel
Blade length 95 mm
Overall length
Blade thickness ^@
Blade width
2
9 mm
&
15 mm
19 mm
^
^
^'
No. 710277
No. 710278
No. 710279
No. 710280
No. 710281
No. 710282
No. 710283
No. 710284
No. 710285
No. 710286
&_2
&_2
&'
&'"&
'
"
&^
2&
2&
&^
20.90
20.90
21.90
22.50
23.90
24.50
25.50
26.90
26.90
29.90
Price advantage
2 6-Piece Set
2#=
}
2&&"^^'.
No. 710287
&2 184.00
Chinese Type
Rugged HSS blades in a simple design. These Chinese chisels will not let you down, even under rough
treatment in restoration and joinery work or when working on hard composite materials and glue joints.
2
B ;Z;ZZ\<;3\;`Z
Z;Z
;?
#
ZZ$2`%
#
duty applications and working on wearing
materials. The slightly tapered blades
reach corners and undercuts effortlessly.
Fine-grained handle made of Chinese
hardwood.
1 Single chisel
Blade length 105 mm
Overall length ^
Blade thickness 4 mm
Blade width
&
19 mm
^&
^'
No. 700980
No. 700981
No. 700982
No. 700983
No. 700984
"'^
&2_
&&&
&&_2
&
11.70
12.70
13.10
14.00
14.80
Price advantage
2 5-Piece Set
5-piece set, in a cotton tool roll:
&&"^&^'
No. 700985
2&' 74.00
C ;Z;ZZ<`\{Z;
These extra-broad chisels are perfect for
large-scale carpentry, restoration and
sculpture work. The front portion of the
spade-shaped blade is made of HSS
$2`%
#
the body via a transitional metal layer.
Durable handle made of fine-grained Chinese hardwood with a naturally seasoned
surface.
1 Single chisel
Blade length 80 mm
Overall length
Blade thickness 4 mm
Blade width
40 mm
50 mm
2^
75 mm
90 mm
No. 700991
No. 700986
No. 700987
No. 700988
No. 700990
&'
&"
&^^
&
&_'
12.90
12.60
16.10
18.50
21.20
Price advantage
2 5-Piece Set
5-piece set, in a cotton tool roll:
2^_"
No. 700996
2&&' 72.80
45
Chisels
A ;\;``Z
Made of fine-quality leather. The seams
are reinforced with rivets.
Pockets 12
Max. tool length _
Outer dimensions ?"
No. 717504
' 48.60
Pockets 6
Max. tool length _
Outer dimensions ^_?"
No. 717501
2^" 31.40
Pockets 12
Max. tool length ^
Outer dimensions ?"
No. 717503
&"^ 49.90
Pockets 6
Max. tool length ^
Outer dimensions ^_?^
No. 717502
'& 33.50
Pockets 20
Max. tool length _
Outer dimensions _"?"
No. 717505
^^2 63.50
Pockets 5
Max. tool length
Outer dimensions ^&?
No. 712900
& 12.40
Pockets 10
Max. tool length '
Outer dimensions 2?
No. 712901
&& 18.10
D ~`;;\~Z
For Japanese chisels, transparent plastic.
For blade width
2
9 mm
&
15 mm
18 mm
^
^2
No. 710085
No. 710086
No. 710087
No. 710088
No. 710089
No. 710090
No. 710091
No. 710092
No. 710093
C `~\Z;
Strong, impregnated cotton fabric rollup
case. Belt with snap fastener. As the
tools can only be inserted from one side,
and are secured by a flap, they cannot
fall out.
Pockets 6
Max. tool length 2
Outer dimensions ?^
No. 707513
'_ 9.60
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
Pockets 9
Max. tool length 2
Outer dimensions 2?^
No. 707514
&_2 12.80
E ;\;`~`;;\~Z3\{;
]~`;]`3;{;\;`
These preformed protective caps made of
cow leather are fixed to the chisels necks
via a snap. For Japanese chisels with a
7
?2
Pockets 12
Max. tool length 2
Outer dimensions _&?^
No. 707515
&^^ 16.10
715150
715151
715152
715153
^'
^^2
^^
^_'
3.90
4.00
4.20
4.50
F ;\;`~`;;\~Z
3\{;]Z`;\<;;\;`]`
`\;{~\`|Z;Z
G ;\;`~`;;\~Z
3\{;]Z`;\<;;\;`]`
Z`|Z;Z
H ;\;`~`;;\~Z3\{;
]Z`;\<;;\;`]`
3`Z;Z;Z
46
715164
&
4.90
715154
715155
715156
715157
^'_
^"
^
&
4.60
4.70
4.80
4.90
715163
&
4.90
I ;\;`~`;;\~Z3\{;
]Z`;\<;;\;`]`ZZ
For blade width
^2 No.
54 mm
No.
715158
715159
_"
"2
5.70
5.90
Carvers Mallets | 59
Drawknives | 66
Sculptors Axes | 67
Adzes | 67
47
Sculpting Tools
Sculpting Tools
TYPES
Sweep
Blade width
No. 700800
No. 700801
No. 700802
No. 700803
No. 701220
No. 700804
No. 700805
No. 700806
No. 700807
No. 700808
No. 700763
&2^"
&2^"
&2^"
&2^"
&'
&'
&'
&&
^_'
^'
^"
19.50
19.50
19.50
19.50
21.70
21.70
21.70
25.60
28.30
36.70
39.20
No. 700810
No. 700811
No. 700812
No. 700813
No. 700814
No. 700815
No. 700816
&2^"
&2^"
&2^"
&2^"
&'
&'
&&
19.50
19.50
19.50
19.50
21.70
21.70
25.60
Z^=7^$#%
B ~];Z~`Z||;Z=Z`\|
Gouges are used for anything from rough work to shaping to finishing, and are therefore the most versatile
=
7
?
surfaces. The 11-sweep tools, which take you from gouge to V-parting tool, are often used to create shape
transitions.
Blade length &
Overall length
Sweep
Blade width
5 mm
8 mm
&
&2
^
No. 701223
No. 701224
No. 700818
No. 701355
No. 700820
No. 700819
&2^"
&2^"
&'
&'
&&
'"
19.50
19.50
21.70
21.70
25.60
33.90
^
5 mm
8 mm
10 mm
&
&2
^
^
40 mm
No. 700821
No. 700822
No. 700823
No. 701226
No. 700824
No. 700825
No. 700826
No. 700827
No. 700828
No. 700829
No. 700765
&2^"
&2^"
&2^"
&'
&'
&'
&&
^_'
"
^'
^"
19.50
19.50
19.50
21.70
21.70
21.70
25.60
28.30
34.80
36.70
39.20
No. 701356
&& 25.60
4
48
Z_=7^$#%
Sweep 11, blade width 15 / 18 mm (clean-up)
Smaller widths of different sweeps for detail
work depend on the workpiece. These tools
are also used for our Sculpting Figures
workshop.
For relief work:
Compact carving tools from Pfeil, see page 54
~
=2
~
|
= _&'
For hollowing out troughs or bowls:
#3
\== _222
~
Z
| == __
Pfeil Sculptors Gouge, short-bent version,
see page 50.
Sculpting Tools
~];Z~`Z||;Z=Z`\|
Gouges are used for anything from rough work to shaping to finishing, and are therefore the most versatile
=
7
?
surfaces. The 11-sweep tools, which take you from gouge to V-parting tool, are often used to create shape
transitions.
Blade length &
Overall length
Sweep
Blade width
^
5 mm
8 mm
10 mm
&
&2
^
^
40 mm
No. 700830
No. 700831
No. 700832
No. 701227
No. 700833
No. 700834
No. 700835
No. 700836
No. 700837
No. 700838
No. 700766
&2^"
&2^"
&2^"
&'
&'
&'
&&
^_'
"
^'
^"
No. 701357
^_ 28.20
4 mm
2
10 mm
&
14 mm
18 mm
^
^
40 mm
No. 700848
No. 700840
No. 700841
No. 700849
No. 700842
No. 700843
No. 700844
No. 700845
No. 700846
No. 700847
No. 700767
&_^&
&_^&
&'_
&'_
&'_
&"^
^&&
^&&
"
^"
^'
20.60
20.60
22.10
22.10
22.10
26.10
27.50
27.50
34.80
39.20
45.70
4 mm
7 mm
10 mm
&^
&2
18 mm
^
^
40 mm
No. 700850
No. 700851
No. 700852
No. 700853
No. 701229
No. 700854
No. 701230
No. 700855
No. 700856
No. 700857
No. 701231
&_^&
&_^&
&'_
&'_
&"^
&"^
^&&
^&&
"
^"
^'
20.60
20.60
22.10
22.10
26.10
26.10
27.50
27.50
34.80
39.20
45.70
^
5 mm
7 mm
10 mm
&^
15 mm
^
No. 701232
No. 700858
No. 700860
No. 700861
No. 700862
No. 701233
No. 700863
No. 701234
No. 700864
No. 700859
&_^&
&_^&
&_^&
&_^&
&'_
&'_
&"^
^&&
^&&
"
20.60
20.60
20.60
20.60
22.10
22.10
26.10
27.50
27.50
34.80
11
0.5 mm
1 mm
^
7 mm
10 mm
15 mm
18 mm
No. 701235
No. 700868
No. 700867
No. 700865
No. 701238
No. 700866
No. 700869
No. 701239
&''
&''
&''
&''
&''
&"_
^_
22.40
22.40
22.40
22.40
22.40
23.50
28.20
30.40
a Chisels, b Sweep 7
c Sweep 5, d Sweep 7, eZ^
Working on surfaces with different sweeps
results in different surface structures, which
means they can also be used to produce
variations in design. The larger the sweep,
19.50
19.50
19.50
21.70
21.70
21.70
25.60
28.30
34.80
36.70
39.20
A ~];Z~`Z||;Z=|`\;{
The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point
without damaging the edges of recess.
Blade length &
Overall length
Sweep
Blade width
7L
14 mm
^
No. 700710
No. 700884
No. 700885
No. 700711
'
"
_&
^2^
8L
10 mm
18 mm
^
No. 700715
No. 700886
No. 700716
&& 25.60
" 28.90
^" 39.20
&=2
^
2
10 mm
No. 700720
No. 701254
No. 700721
'2 27.20
'2 27.20
^_ 28.20
23.90
28.90
29.40
42.40
www.more-than-tools.de
Order hotline:~ }"#$%""&#"&"#"
"#$%&'#"&"#"/
##
49
Sculpting Tools
A ~];Z~`Z||;Z=Z``\;{
Similar to the long bent form, these gouges are also used for deep, curved
shapes. The even stronger bent of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
Sweep
Blade width
7A
2
10 mm
14 mm
18 mm
No. 700887
No. 701261
No. 700880
No. 701262
No. 700881
&_^&
&'
&'
&"^
&"^
20.60
21.70
21.70
26.10
26.10
7 mm
10 mm
18 mm
No. 700700
No. 700882
No. 700883
No. 700701
&_^&
&'
&"^
^^2
20.60
21.70
26.10
27.80
4 mm
7 mm
No. 700705
No. 700706
No. 700707
&"&2 22.80
&"&2 22.80
&"&2 22.80
^
8 mm
No. 700725
No. 700726
&"&2 22.80
&& 25.00
8A
11A
&\=2
To make things easier, imagine the geometrical shape underneath the surface, e.g. the
eye as a ball, the neck as a cylinder, etc.
Always work your way from the highest point
(e.g. the nose) to the back. This gives you the
opportunity of making corrections if necessary by moving the form slightly backwards.
{
$
of the head, tip of the nose, elbow, etc.)
These should be best marked with a cross.
B ~];Z~`Z||;Z=#~\`|
V-parting tools are popularly used in relief carving to delimit areas.
Another important use is the cutting of even grooves.
1 &2
Blade width
No. 700870
No. 701242
No. 700871
No. 701243
No. 700872
&"&2
&"&2
&"&2
&&
&"^
^
2
8 mm
No. 700876
No. 701245
No. 700877
&"&2 22.80
&"&2 22.80
&& 25.00
SHARPENING
2
8 mm
No. 700703
No. 700873
&"&2 22.80
&"^ 26.10
Sharpening on
&
^
2
No. 700874
No. 700875
' 23.90
&& 25.60
&2^
^
2
No. 700878
No. 700879
" 24.50
26.70
&^"
22.80
22.80
22.80
25.00
26.10
^
4 mm
2
8 mm
10 mm
2 #~
2
No. 700730
&
No. 700731
'^ 33.70
^&" 37.00
50
3 ^3
2
^^2 27.80
Sculpting Tools
Sweep
Blade width
2
10 mm
&^
No. 700736
No. 700738
No. 700737
&"^ 26.10
&"^ 26.10
&"^ 26.10
B ~];Z~`ZZ;Z\{||;Z={|;|||;Z
This gouge is used to clear the ground of deep, shouldered areas to their final depth and to rework corners.
Sweep
Blade width
&
2
&
No. 700728
No. 700729
&"&2 22.80
&"&2 22.80
TIP
For beginners in woodcarving, we recommend
Sweep
Blade width
&|
5 mm
No. 700689
2_ 24.60
king situations.
D
D ~];Z~`Z||;Z=]Z\=<\{;Z
Thanks to their conical form, fishtail gouges are used for backcutting in
relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle
of the gouge can still be corrected.
Sweep
Blade width
^]
2
&
&2
No. 700740
No. 700741
No. 700742
&'' 22.40
&"_ 23.50
26.70
5F
8 mm
14 mm
No. 700745
No. 700746
No. 700747
&'' 22.40
&"_ 23.50
26.70
7F
2
10 mm
&2
No. 700750
No. 700751
No. 700752
&'' 22.40
&'' 22.40
26.70
9F
5 mm
10 mm
No. 700755
No. 700756
No. 700757
&'' 22.40
" 24.50
30.40
51
Sculpting Tools
A
~];\|;;||;Z
With an extra-hard hornbeam handle and heavy-duty ferrule,
this gouge is designed for rough shaping with the mallet and
can resist even the toughest impact.
Blade length 140 mm
Overall length ^
Sweep
Blade width
5
7
7
8
9
2
2
50 mm
2
2
50 mm
No. 700946
No. 700947
No. 701276
No. 700948
No. 701271
No. 700949
'_
2&^
'_
2^&"
2"2
"
69.70
73.00
69.70
75.20
77.30
70.80
B ~];\`;`ZZ;
[\Z\{;Z='#~;;Z;
8 standard carving tools as professional
basis equipment for quality-conscious
beginners. Delivered in a roll-up case.
Sweep 9 / 4 mm; sweep 7 / 10 mm;
&66
C
C ~];\`;`ZZ;
[\Z\{;Z=&#~;;Z;
Z
&~
medium-sized figures, lettering and fine
ornaments, compiled by the Sculptor`s
School in Brienz. In a robust roll-up
case. Sweep 1 (flat) / 8 mm;
sweep 1 (flat/skew) / 8 mm;
'66
_26_&6
sweep 8 / 4 mm; sweep 9 / 10 mm;
&$2%26
'\&6_
Roll-up case. Ash handles.
No. 700890
^^2& 278.00
52
D ~];\`;`ZZ;
[\Z\{;Z=#~;;Z;
[
accessories you are perfectly equipped
for a wide range of challenging carving
}&$
%&26
&Z$
%&26
6^^6
^&6^6
^6_6
sweep 8 / 7 mm; sweep 8 / 18 mm;
'6"_6
sweep 9 / 15 mm; sweep 11 / 10 mm;
&&6&$2%
&6&$%'6
&$%^6
sweep 8 A / 18 mm; sweep 7 L
<
=
\
=
oil and wooden carvers mallet.
Roll-up case. Ash handles.
No. 700898
^&" 632.00
Sculpting Tools
Pfeil Carvers Set with Plane Tree Handles
These carving sets, with handles made of oiled
plane tree heartwood made exclusively for us are
not just aesthetic but also hard-wearing. The decorative plane tree wood with its slightly red colour is
due to its small annual rings and scattered pores
very hard and tough and therefore takes more
blows than ash wood. This beautiful wood is also
characterized by its striped pattern that is a result
of the cutting face of the medullary rays. Delivered
in a practical roll-up case made of robust Schwingerhosen-yarn, with grey felt lining to protect the
blades.
A ~];\`;`ZZ;[
~\;`;;\{;Z='#~;;Z;
8 standard carving tools as professional
basis equipment for quality-conscious
beginners.
Sweep 9 / 4 mm; sweep 7 / 10 mm;
&66
&6
&
Roll-up case. Plane tree handles.
No. 730020
&'&& 216.00
B
B ~];\`;`ZZ;[
~\;`;;\{;Z=&#~;;Z;
Z
&~
medium-sized figures, lettering and fine
ornaments, compiled by the Sculptor`s
School in Brienz.
Sweep 1 (flat) / 8 mm;
sweep 1 (flat/skew) / 8 mm;
C ~];\`;`ZZ;[
~\;`;;\{;Z=#~;;Z;
[
accessories you are perfectly equipped
for a wide range of challenging carving
projects:
&$
%&26
&Z$
%&26
6^^6
^&6^6
^6_6
sweep 8 / 7 mm; sweep 8 / 18 mm;
'6"_6
sweep 9 / 15 mm; sweep 11 / 10 mm;
&&6
&$2%&6
&$%'6
&$%^6
'\&'6_
<
=\
sas sharpening stones, grinding oil and
wooden carvers mallet. Roll-up case.
Plane tree handles.
No. 730022
^ 643.00
'66
_26_&6
sweep 8 / 4 mm; sweep 9 / 10 mm;
&&^6
&$2%26
'\&6_
Roll-up case. Plane tree handles.
No. 730021
^_' 283.00
D ~];\`|||;Z=
\|\`{;\=&&#~;;Z;
Recommended by professional sculptors:
This set of 11 Pfeil carving tools for
quick and easy preliminary cutting of
large figures was put together in cooperation with experienced sculptors from the
State Vocational School in Grden (South
Tyrol). Delivered in a practical roll-up
case made of robust Schwingerhosenyarn, with grey felt lining to protect the
blades. The set comprises carving tools:
&$
%&=
^6^^6
6&6
_&^6
sweep 11 / 5 mm and 10 mm;
ash handles.
Carving knife: blade length 55 mm,
cherry wood handle.
No. 700669
&2 299.00
E ;3~`#~\Z;Z
Protect your tools with these roll-up
cases made of indestructible Schwingerhosen yarn linien, which is as much
admired in Switzerland as the leather
trousers in Germany. The inside is lined
with grey felt and thus protects the tools
from touching each other and keeps away
dust and shavings.
Pockets
8
&
No. 730024
No. 730025
No. 730026
^^^ 39.90
^_& 42.50
'^_' 99.70
53
Sculpting Tools
E
E ~]; COMPACT CARVING TOOLS, V-PARTING TOOLS, STRAIGHT
Blade length 90 mm
Overall length
Sweep
Blade width
&=2
4 mm
2
8 mm
No. 700686
No. 701338
No. 700688
No. 700687
&2
&2
&2
&2
&=
^
No. 701340
&2 18.40
18.40
18.40
18.40
18.40
A
A ~];3~\\`|Z=Z;Z=Z`\|=
{<;<;;
Blade length 90 mm
Overall length
Sweep
Blade width
8 mm
No. 700670
&^&& 15.60
&Z
8 mm
No. 700671
&^&& 15.60
B
B ~];3~\\`|Z=||;Z=Z`\|
Blade length 90 mm
Overall length
Sweep
Blade width
&
No. 700672
&&^ 18.00
&
No. 701328
&&^ 18.00
^
8 mm
&
No. 700673
No. 700674
No. 700675
&"2 17.80
&"2 17.80
&&^ 18.00
4 mm
10 mm
14 mm
No. 700676
No. 701332
No. 700678
&"2 17.80
&"2 17.80
&&^ 18.00
4 mm
7 mm
10 mm
No. 701333
No. 700679
No. 700681
&"2 17.80
&"2 17.80
&"2 17.80
5 mm
10 mm
No. 700682
No. 700683
&"2 17.80
&&^ 18.00
11
1 mm
^
No. 700684
No. 701336
No. 700685
&2 18.40
&2 18.40
&2 18.40
Sweeps depict the shape of a tool as viewed from the front. To make tool selection
easier, these shapes are numbered. The gouge sweeps go back to a standard that
was set by the so-called Sheffield
Illustrated List, where the number has
no particular meaning. People often
think that the number relates to the
diameter of a circle on which a specific
sweep is based, but this is wrong.
It may well be possible that the shapes
of the sweeps were based on Archimedean spirals rather than on circles.
In general, the sweeps of the different
manufacturers follow the basic system
of the Sheffield Illustrated List, but
some may also differ. To allow you
to compare the sweeps, we print a
1:1 sketch of the individual sweeps
in our catalogue wherever possible.
C
C ~];3~\\`|Z=Z~`Z||;=
|<;]`3
Blade length 90 mm
Overall length
Sweep
Blade width
7L long cranked 10 mm
No. 700677
&&^ 18.00
Carving tools should be treated with care. They should be stored in rollcases,
wooden boxes or wall-mounted tool racks. In order to avoid improper cuts and
the danger of injury, tools should not be allowed to fall on the floor or impact one
another. In order to prevent corrosion (rust etc.), the tools must be stored in a dry
room. For longer periods of storage, it is recommended to protect the blade of the
tool with a thin coat of light oil.
D ~]; 3~\\`|Z=Z~`Z||;Z=
Z`<;]`3
Blade length 90 mm
Overall length
54
Sweep
Blade width
8A cranked
7 mm
No. 700680
&&^ 18.00
Sculpting Tools
C SCULPTORS TOOLS,
&#~;;Z;
The compact design of these carefully
crafted Nomi from a master workshop
in Japan makes them well-suited for
delicate tasks requiring precision, such
as lettering and reliefs. Blades of doublelayered steel, core made from Blue Paper
Steel, Japanese red oak handles.
Gouges:
Sweep 5 / 15 mm;
sweep 9 / 9 mm;
226
2
&6
flat point 15 mm;
&6
#&6
skew chisel right 9 mm;
V-parting tool 7.5 mm;
flat cranked 9 mm.
10-piece set in a kiri wood case.
Blade length @
Overall length @&
No. 714009
^2'"& 439.00
55
Sculpting Tools
A ||;Z
These gouges
offer all the quality advantages of
Japanese sculptors gouges at a good
price-performance ratio. Double-layered
blades, core made from SK 5, seamlessly integrated handles and a removable
heavy-duty head ferrule, which is fitted
for use with a hammer. Outside bevel.
Sweep 7
Blade length 50 mm
Overall length
Single gouges
Blade width
2
9 mm
&
15 mm
18 mm
&
2
No. 715251
No. 715252
No. 715253
No. 715254
No. 715255
No. 715256
No. 715257
&^_
&^_
&^_
&^_
&"2
&"
&
17.10
17.10
17.10
17.10
17.80
18.20
18.50
7-Piece Set
Price advantage
B AUTO MACH~[;`\`;`
This electric carving tool has a reciprocating cutting head, which allows novice
as well as professional carvers to achieve
excellent surfaces even under difficult
cutting conditions. At just 800 g, the
aluminium pressure-injection die-cast
housing is very light yet robust and
can be used with one hand. The forged
two-layer cutters are ultra-sharp thanks
to their cutting edge of blue paper steel
$2^`%= #7
7
soft steel layer makes them robust and
easy to sharpen. The cutters are easy
to change, thanks to the clamping nut
at the cutting head, and are tightened
with the supplied wrench. For safety, the
cutter only reciprocates when the tool is
pressed onto the wood surface. The heat
from the motor is dissipated through
cooling slits so that the tool can be used
in non-stop operation.
56
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
Sweep
Blade width
1 straight
^
2 =7
7
7
7
7
7
7 bent
#
"
"
2
9 mm
&
^
2
&
18 mm
&
2
5 mm
^
10 mm
No. 715222
No. 715219
No. 715216
No. 715211
No. 715220
No. 715217
No. 715213
No. 715214
No. 715221
No. 715212
No. 715218
No. 715223
&&'
&^&&
&^&&
&&'
&&'
&&'
&_"'
&_"'
&&'
&&'
&&'
&&'
14.10
15.60
15.60
14.10
14.10
14.10
21.40
21.40
14.10
14.10
14.10
14.10
Sculpting Tools
A \`|<\{;Z=&'#~;;Z;
Light-duty gouges for relief carving and
detail work. The blades have pointed
tangs. Mixture of forms (flat, flat/skew,
B \`|Z;=&#~;;Z;
Light-duty gouges with pointed tangs.
Chinese hardwood handles. Mixture of
forms (flat, flat/skew, curved, V),
C Z~`Z||;<\{;Z=
&'#~;;Z;
Tools for all-purpose carving. The blades
have socket tangs. Mixture of forms (flat,
flat/skew, curved, V).
D
D Z~|Z;=2#~;;
Double-layer forged gouges with socket
tangs. Chinese hardwood handles. Mixture of forms (flat, curved, V),
in cotton tool roll.
Blade width 2@&'
Overall length &'@&
No. 700973
2& 62.60
E Z~|Z;=&#~;;
Double-layer forged gouges with socket
tangs. Chinese hardwood handles. Mixture of forms (flat, flat/skew, curved, V),
in cotton tool roll.
Blade width 2@
Overall length &'@&
No. 700974
""2 113.00
Special Tools
Inclusive free sharpening pass.
For more informations see page 5.
Lifetime sharpening.
Two free sharpenings.
F
F TWO-HAND YARI-KANNA
For planing large wooden
surfaces in carpentry and sculpting. Core
made of Blue Paper Steel, handle made
of tagayasan (rosewood).
Blade width
Blade length 90 mm
Overall length 410 mm
No. 710095
&2_^ 199.00
G ;#\{\`#\\
For fine sculpting work,
instrument making and restoration. Core
made of White Paper Steel, tagayasan
handle.
Blade width 18 mm
Blade length 2
Overall length ^
No. 710096
'_ 69.90
57
Sculpting Tools
A MIKISYO
Precision tool
for removing fine shaving or chipping in
carving and restoration work. Made of
Blue Paper Steel.
Blade width 4 mm
Blade length
Overall length
No. 710097
^_^" 44.50
B \~\;Z;Z`~||;
Semi-circular, double-layer blade
for hollowing out bowls, chair seats, etc.
Core made of White Paper Steel, tagayasan handle. Inside bevel.
C ~];Z`~||;=Z;&
The curved blade is particularly suitable
for bowls and hollow shapes. Where
normal gouges can no longer be guided
along the grain due to lack of space (e.g.
D ~];Z`~||;=Z;
This scorp gouge is primarily used for
hollowing out large bowls and for chair
seats. The hefty cherrywood handle provides a comfortable grip and the curved
E ;Z;|#\{;{||;
Ideal for hollowing out drums, deep
vessels and large sculptures. The blades are bevelled on
the inside and slightly angled, allowing more free play for
the oak handles. Made of carbon-steel.
Overall length 2'
Sweep
Blade width
4
5
5
9
9
9
_^
^
2
^
40 mm
48 mm
No. 700978
No. 700976
No. 700977
No. 701001
No. 701002
No. 701003
'"
&'
&^
_&
'""
^&&
33.90
26.40
29.90
32.30
34.50
36.90
The native inhabitants of Canadas west coast have been using carving
knives whose form and function are similar to the Japanese Yarri-Kanna
for centuries. The Mettgar knives
were used by the Haida and Tsimshian tribes to make masks, small
figures, bent boxes and other objects
of daily use. The relatively flexible
blades are sharpened on both sides
and can therefore be used on the
push or pull stroke to remove very
thin shavings. They are securely fixed
to a cedar handle with glued cord.
Nickel-alloyed carbon steel, approx.
58 Rockwell.
F ;{];
For deep hollowing, grooves
and undercuts.
G Z[`;{];
For smoothing surfaces and cutting
grooves to make traditional bent boxes.
58
Blade width 9 mm
Blade length 55 mm
Overall length
No. 701651
2^_' 75.90
Lifetime sharpening.
H |`;{];
For hollowing, carving reliefs
and patterns.
Blade width 9 mm
Blade length 45 mm
Overall length ^
No. 701650
2^_' 75.90
Blade width 9 mm
Blade length 50 mm
Overall length ^
No. 701652
2^_' 75.90
Sculpting Tools
Carvers Mallets
B ~\Z3\;
;?
7=#7
7
plastic mallets with full-length arm of untreated American maple. The high-quality
plastic hammer heads are completely
wear-resistant and protect the handles
of your tools. Heavier mallets with the
same head shape have a lead core for
additional weight and momentum.
A ~]; <`\ZZ3\;
Highly functional brass mallets from the
traditional company Pfeil, with beautiful
cherry wood handles. Their bell-shaped
heads enable the mallets to be held close
to the neck in order to finely adjust the
striking power. The mallets are shock
absorbing and easy on your arms.
Head diameter 70 mm
Overall length _
1 Size M
Head diameter 47 mm
Overall length
Total weight 450 g
No. 730018
^ 51.70
Total weight
2 Size L
Head diameter 49 mm
Overall length
Total weight 700 g
No. 730019
59.50
_& 32.30
^2& 38.80
Head diameter 85 mm
Overall length _
Total weight
^&2' 37.70
^2 42.90
G u ar an t e e
Satisfaction
Hornbeam Mallet
G u ar an t e e
C \~\;Z;
C
\`;`Z3\;
Turned from a piece
of keyaki wood,
extremely robust,
high-level impact power.
Head diameter 85 mm
Overall length _
Total weight 700 g
No. 714054
2'& 31.90
D
`<;\33\;=
LONG
Head diameter 70 mm
Overall length "
Total weight ^'
No. 730035
&2' 25.80
E
`<;\33\;=
SHORT
Head diameter 85 mm
Overall length
Total weight 500 g
No. 730037
&2' 25.80
Mortised handles
The most secure way of attaching a
handle is with a through mortise.
F HATTORI`<;\33\;
Solid carvers mallets in traditional
German form, made of hornbeam, one of
the hardest indigenous woods.
The mortised shaft is unvarnished.
Shape of the
mallet
The round shape
of the mallet is
essential for its
use in sculpting
because it allows
you to control the
impact in different directions.
The head widens
towards the top,
which allows an ergonomic grip and
precise blows. Since the wrist cannot
77"
the blow, the tapering of the mallet
?
&#&
This allows an ergonomic grip with
maximum striking precision.
1 Size S
Head diameter 70 mm
Overall length _
Total weight ^'
No. 730015
&&2' 13.90
2 Size M
Head diameter 87 mm
Overall length _
Total weight 540 g
No. 730016
& 17.20
3 Size L
Head diameter &
Overall length _
Total weight "2
No. 730017
&2_ 19.90
59
Sculpting Tools
A ~];~\`|];
Chip carving knives ground and polished ready to use, with fine oiled cherry wood
handles. The form and size are perfectly aligned for freehand carving of small figures,
chamfering and wickerwork.
Overall length 155 mm
1
2
Blade
Blade width
Blade length
]
&
]
&^
11 mm
11 mm
55 mm
2
No. 700931
No. 700934
&2_ 12.70
&2_ 12.70
3
4
5
6
7
8
Blade
Blade width
Blade length
Form 14
Form 15
FormPfeil
Form 1
Form 4
Form 7
&2
&
&^
9 mm
8 mm
&^
2
50 mm
^
50 mm
^
50 mm
No. 700889
No. 701282
No. 700921
No. 700920
No. 700923
No. 700926
& 14.80
& 14.80
'_ 9.60
"' 11.40
'_ 9.60
'_ 9.60
B
B ~];\`|;Z=
#~;;Z;
You wont want to put these carving
knives down. The ergonomic plumwood
handles make for excellent control of these knives, enabling fine chamfering work
as well as freehand carving of figures
and small objects. The set contains 4
forms (knives with cambered blade and
round backs, large and small, knives with
straight blade large and small). Case
made of Schwingerhosen yarn.
Blade length ^@
Overall length &2@&'
No. 700999
'&& 97.00
2
6
3
D
4
C ~];
[{[`|;Z
Made of alloyed Swiss steel.
\
?"#2` = 77
Overall length &2
Blade thickness
60
Blade width
1
2
3
4
5
6
^
2
9 mm
&
15 mm
19 mm
No. 700401
No. 700402
No. 700403
No. 700404
No. 700405
No. 700406
'_
'_
'_
'_
'_
'_
10.20
10.20
10.20
10.20
10.20
10.20
D ~]; WOODWORKING
;Z=[`Z;[{
\{;Z
Made of alloyed Swiss steel. Approx. 592` = 77
Overall length &2
Blade thickness
Blade width
^
2
9 mm
&
15 mm
19 mm
No. 700390
No. 700391
No. 700392
No. 700393
No. 700394
No. 700395
&
&
&
&
&
&
16.90
16.90
16.90
16.90
16.90
16.90
Sculpting Tools
2
B
3
A ;`{3ZZ;Z
These HSS blades are extremely hard
$
?2`%=
wear. They are perfect for working hardwoods, veneers, synthetic materials and
laminates as well as for making small
planes. The blades are hardened along
their entire length, have double bevels
C ~];\<;||;{;\];
This knife has a round and a hollow
ground blade, which means it can be
used for deep cuts but also for cutting
ornaments and letters. A hexagonal
handle of oiled acacia wood provides a
comfortable, non-slip grip.
B \#Z;;3Z;Z=
2#~;;Z;
For fine restoration work and model building. Stainless steel hardened to approx.
50 HRC, coarse finish.
D
2
D ~]; CHILDS CARVING TOOL,
`\`;`
Carving is not just great fun for children,
it is also has educational value. The
child-friendly handle of oiled beech and
the short multiform blade of proven Pfeil
E ~];Z~||;
Handy spoon gouge with carved
blade for hollowing.
Oiled ash handle.
Overall length 150 mm
Bevel
F HOCK \`|;Z
The blades for these knives are shar
$2`%
pure carbon steel that can be ground to
extreme sharpness. Two stainless steel
rivets fix the blade to the handle. The
oil-finished bubinga handles provide a
comfortable grip and make the knives
easy to guide.
Blade
1
2
3
4
5
Form A
Form B
Form C
Form D
]
;
No.
No.
No.
No.
No.
"
"
"
"
"
24.50
24.50
24.50
24.50
24.50
1
61
Sculpting Tools
Pfeil Linoleum and Woodcutting Tools
A ~];;3\{[{|Z
Blade length 70 mm
Overall length &
10
11
Blade width
No. 700902
No. 700903
No. 700904
No. 700906
No. 700911
No. 700913
&^^2
&^^2
&^^2
&^^2
&^^2
&^^2
15.90
15.90
15.90
15.90
15.90
15.90
No. 700905
No. 700907
No. 700908
No. 700909
No. 700910
No. 700912
&^^2
&^^2
&^^2
&^^2
&^^2
&^^2
15.90
15.90
15.90
15.90
15.90
15.90
No. 700914
No. 700916
No. 700917
No. 700918
No. 700919
No. 700936
&^^2
&^^2
&^^2
&^^2
&^^2
&^^2
15.90
15.90
15.90
15.90
15.90
15.90
No. 700780
No. 700781
No. 700782
No. 700783
No. 700784
No. 700785
&^^2
&^^2
&^^2
&^^2
&^^2
&^^2
15.90
15.90
15.90
15.90
15.90
15.90
_'
_'
_'
_'
93.30
93.30
93.30
93.30
12
Set C
13
14
15
16
17
18
Set D
Set B
Set A
Sweep
19
20
21
22
23
24
~];;3\{
WOODCUTTING TOOLS Price advantage
2#
Blade length 70 mm
Overall length &
Set
A
B
C
D
No. 700900
No. 700901
No. 700939
No. 700891
B ~];;3\{
[{|Z=&#~;;Z;
Price advantage
62
Sculpting Tools
Pfeil-Woodcutting Tools
Their robust design makes these woodcutting tools ideal for wood
carvings such as ornaments and reliefs as well as chip carving.
Mushroom-shaped handles of untreated domestic pearwood.
<2#&
Shaft diameter of blade 7 - 8 mm
1
2
3
4
5
6
7
8
Sweep
Blade width
<&
<&Z
<^
B5
B 8A
B9
<&2
B7
&
&
&
&
10 mm
10 mm
8 mm
14 mm
No. 700790
No. 700791
No. 700792
No. 700793
No. 700794
No. 700795
No. 700796
No. 700797
&2
&2
&2
&2
&2
&2
&2
&2
18.40
18.40
18.40
18.40
18.40
18.40
18.40
18.40
B ~]; WOODCUTTING
ZZ;\='#~;;Z; Price advantage
In a beautiful maplewood storage rack.
1 x No. 700790 - 700797.
Blade length 80 mm
Overall length 140 mm
No. 700915
&&' 140.70
C ~]; WOODCUTTING
ZZ;<='#~;;Z; Price advantage
In a beautiful maplewood storage rack.
&? _2^#_2^_
Blade length 80 mm
Overall length 140 mm
No. 700998
&&' 140.70
1
2
3
4
5
6
7
8
Sweep
Blade width
<
B4
B7L
B8
B9
B 11
B 15
<
&
&
&
10 mm
7 mm
7 mm
2
10 mm
No. 700630
No. 700631
No. 700632
No. 700633
No. 700634
No. 700635
No. 700636
No. 700637
&2
&2
&2
&2
&2
&2
&2
&2
18.40
18.40
18.40
18.40
18.40
18.40
18.40
18.40
10
Japanese Type
E \`|];
;?
cambered handles made of untreated
Japanese white oak for perfect cutting
control.
Z\$
?2`%
Blade length @2
Overall length '@&"
Bevel double bevel
Blade
1
2
3
4
5
6
7
8
9
10
A
B
C
D
;
F
G
H
I
J
No. 710755
No. 710756
No. 710757
No. 710758
No. 710759
No. 710762
No. 710763
No. 710764
No. 710765
No. 710766
&2^"
&2^"
&2^"
&2^"
&2^"
&2^"
&2^"
&2^"
&2^"
&2^"
19.50
19.50
19.50
19.50
19.50
19.50
19.50
19.50
19.50
19.50
F \`|;Z=
#~;;Z; Price advantage
#=$\=<=={=;%
Blade length @2
Overall length '@&"
Double bevel
No. 710760
__^ 91.90
G \`|;Z=
#~;;Z; Price advantage
5-piece set, in case (F, G, H, I, J).
Blade length @2
Overall length '@&"
Double bevel
No. 710761
__^ 91.90
63
Sculpting Tools
A \`|Z;="#~;;Z;
The most important tools for carving
small objects and reliefs in a functional
roll-up case. Solid carbon-steel blades,
?2`=
to use. Fitted with teak handle scales.
Bevelled on one side.
9-piece set: knife 9 mm;
&&6
2&6
&6
V 8 mm; saw 75 mm, TS 1.5 mm;
=
Overall length &@&"
No. 710742
& 179.00
B \~\;Z;~\`|
;Z
Multilayer blades, very sharp and wearresistant. Core made of Blue Paper Steel.
Handles of bubinga wood. Forms A and
B bevelled on one side, C and D bevelled
on both sides.
Blade length ^
Overall length 180 mm
Bevel double bevel
Blade
1
2
3
4
A
B
C
D
No. 710715
No. 710716
No. 710717
No. 710718
&
&
&
&
16.90
16.90
16.90
16.90
\~\;Z;~\`|];
Z;=#~;;Z; Price advantage
4-piece set, in a canvas case
(form A, B, C, D).
Blade length ^
Overall length 180 mm
No. 710719
64.90
D \`|];Z;=
#~;;Z;
Featherweight and razor-sharp, traditionally used in Japan for woodblock,
mask and relief carving. The thin blades
$2^`%=
7#
paper steel come sharpened and ready
to use. Handles of magnolia wood. Blade
?Z
9 mm; skew chisel 9 mm; gouge sweep
"^6 '26#
mm. 5-piece set in a kiri wood case.
C CARVING AND
{`];
Foldable with locking blade. Handle of
Japanese cherry wood. Right-hand bevel.
Core made of Blue Paper Steel.
Blade width
Blade length 100 mm
Overall length ^
Bevel right
No. 710705
" 24.90
E \`|];[
`{\{;
Similar to the handles of Samurai
swords, the handle of this Japanese
carving knife is bound with silk cord.
Slip-proof in the hand, it can be precisely
guided, even with increased application
^#
7=
#
<
Paper Steel, hand guard, bevelled on
both sides.
Blade length 55 mm
Overall length &2
F
E
Blade
1 curved
No. 710747
2 straight
No. 710749
64
&^ 29.90
&^ 29.90
F ~[;`|`~\`|Z=
_#~;;Z;
Fine tools with thin blades of doublelayered steel for carving masks, reliefs,
woodblocks and linoleum. The cutting
2^`
sharpened and ready to use. 7-piece set
7 ?} "^6
"262"6
^"6# =6
straight chisel, 7.5 mm;
skew chisel 7.5 mm.
Blade length ^
Overall length &2
No. 710258
^__^ 44.90
Sculpting Tools
Swedish Type
Frost Knives
Cutting tools have been forged in the Swedish town of Mora for over 400
3
= 7;
]
&
synonymous with functionality and reliability. The majority of the blades
#
layered carbon-steel. The knives are distinguished by their excellent
sharpening properties and long edge life (the hardness of the core layer is
?2&`%
=
not been added, meaning that the blades are not rustproof. The birch
handles are firmly attached to the full-length tang.
Svante Djrv
Hans Karlsson
1
D
A FROST {`;Z
\`|];_^
Besides creativity, carving also requires
a sense of shape forming and already
in childhood makes the educationally
important reference head-hand-material.
Give your children access to the creative
activity of woodworking with this carving
knife, which is specially designed for a
childs hand. Carbon-steel, birch handle
with hand guard. Riveted leather sheath
with a handle strap.
Blade length _^
Overall length &2
No. 701564
^'_ 28.40
B FROST\#~`~Z;
];&^_
A Frost classic for carvers, fishermen and
outdoorsmen. Beautiful leather sheath
with belt loop.
Blade length 100 mm
Overall length
No. 701563
&^ 29.90
D FROST CARVING
];&2
Carving and outdoor knife in the classic,
slim Mora design.
Plastic sheath included.
Blade length 79 mm
Overall length 190 mm
No. 701567
& 17.90
I Z\;{`Z;{
];
With a curved blade for hollow forms.
E FROST CARVING
];&^
Straight cutting edge, particularly well
suited for chip carving, reliefs and ornamentation. Plastic-sheath included.
Blade length 58 mm
Overall length 185 mm
No. 701565
& 17.90
F FROST];&2
Short, narrow curved blade.
Blade length 50 mm
Overall length &2
Bevel double bevel
Curvature radius 14 mm
No. 701568
&" 22.90
G
C FROST\`|];
&
Ideal for use in woodwork classes:
Allround woodwork knife; also suitable
for use in schools due to the compact
blade. Plastic sheath included.
Blade length 59 mm
Overall length &2
No. 701560
& 17.90
G FROST];&2^
Long, wide curved blade.
Blade length 2&
Overall length &2
Bevel double bevel
Curvature radius
No. 701566
&" 22.90
J
J Z\;{`=
{`;Z\`|];
The handle is designed for small hands,
with integrated hand-guard.
Short, strong blade.
Blade length 50 mm
Overall length 145 mm
No. 701574
_^ 56.20
K
K Z\;{`=
\`|];
Universal carving knife, ash handle with
riffled surface.
Blade length 2
Overall length &2
No. 701570
' 59.60
2
L HANS KARLSSON
];
;
on hollow objects. The handle seamlessy joins the blade via a solid tang with
forged-on shoulder.
M
M HANS KARLSSON
Z~||;
With fine forged, cranked and curved
blade, for making spoons, ladles and
small bowls.
Blade width &^
Blade length
Overall length &
No. 701537
^2^" 43.30
N \Z\`ZZZ\;
Drawknife for hollowing out bowls,
troughs and chair seats. The U-shaped
handle can be custom fitted by the user.
Sweep 5
Blade width 2
Overall length 170 mm
No. 701511
&^^_ 159.90
H FROST ];&2
Single bevel for right-hander.
Blade length 50 mm
&2
Bevel left
&
No. 701562
&_2 20.90
Z[;{Z;Z#Z;
Wille Sundqvist:
Working with knifes and axes. This
book by the great Swedish sculptor is
characterised by his love of wood and
the carving tradition of his homeland.
&2~=
=^^
=&?^
In German.
No. 713125
^2 32.80
65
Sculpting Tools
Drawknives
The drawknife is invaluable for boat builders, coopers, wainwrights and
chair makers alike. It can be used for trimming and finishing straight and
curved work pieces, as well as for rounding and chamfering.
A
A |`Z]`Z{`\[];=
~Z[;~\{`;{<\{;
Upswept, curved blade for stripping logs.
#
7 =
fine-grained steel structure for a long
edge life and easy sharpening
7
7
position
`77
and full-length tangs that are fixed to
the end by locknut
` 7
Blade length ^
Blade width ^2
Overall length 2
No. 705985
&^_ 148.00
B
D Z\;{`{`\[];=
~Z[;~\{`;{<\{;
Upswept, curved blade for stripping logs.
#
7 =
fine-grained steel structure for a long
edge life and easy sharpening
7
7
position
`77
=
tangs
D
B ~];{`\[];=
{[Z[;~\{`;{<\{;
Ideal for removing large amounts of stock
from straight surfaces (like a roughing
plane) or working on slightly concave
surfaces.
]
7 =
easy to sharpen
Z
7
force
<
edge for easy rehoning of the bevel and
has a torsion-resistant back
7
full-length tangs
]
Blade length
Blade width
Overall length ^
No. 700966
2& 76.30
E Z\;{`{`\[];=
{[Z[;~<\{;
Ideal for removing large amounts of stock
from straight surfaces (like a roughing
plane) or working on slightly concave
surfaces.
#
7 =
fine-grained steel structure for a long
edge life and easy sharpening
=
tangs
Blade length 2
Blade width ^
Overall length ^
No. 701581
""2 113.00
C ~];{`\[];=
Z`\|<\{;
Heavy drawknife for removing large
amounts of stock and working on straight
and bellied surfaces.
F Z\;{`{`\[];=
Z`\|<\{;
Light drawknife for delicate work.
]
7 =
easy to sharpen
=
and full-length tangs that are fixed to
the end by locknut
]
#
7 =
fine-grained steel structure for a long
edge life and easy sharpening
=
77
good grip
=
tangs
66
G ~];3{`\[];=
Z`\|<\{;
Light drawknife for fine smoothing.
G
1
{
#
#
steel, rustproof
=
=
tangs
1 Form Straight
Blade length &
Blade width
Overall length ^&
No. 700938
'^ 33.70
2 Form Cranked
Blade length 110 mm
Blade width
Overall length '
No. 700937
^&^ 37.30
Sculpting Tools
A ARNAUD{`\[];
Forged in France, these medium-sized
drawknives are suitable for both rough
stock removal and delicate work.
]
7 =
easy to sharpen
]
ning (back of the blade is narrower),
with torsion-resistant back
7
7
#
length rivets
` 7
Straight Blade
For working on straight and bellied
surfaces.
Blade length 145 mm
Blade width ^
Overall length ^
No. 709995
^2" 38.90
Upswept Blade
For working on slightly curved surfaces.
Blade length 145 mm
Blade width ^
Overall length ^
No. 709996
^2" 38.90
Downswept Blade
Particularly suitable for removing a large
amount of stock on straight surfaces (like
a roughing plane) or working on slightly
hollow surfaces.
Blade length 145 mm
Blade width ^
Overall length ^
No. 709997
^2" 38.90
Sculptors Axes
B |`Z]`Z
Z~`Z\;
This sculptors hatchet was developed
together with Swedish sculptor Wille
Sundqvist and is forged by hand under a
spring hammer. As well as a heavy head,
which makes it ideal for rough shaping,
it has a long beard which protects the
hands when the hatchet is held close to
its head for detail work. Curved blade
and pointed toe (top end of the blade)
allow it to be used for many sculpting
purposes.
Double bevel. Serrated handle.
Comes with leather sheath.
Head weight 900 g
Blade length &
Overall length ^_
No. 705964
'2 103.00
D \\`|\;
Hand-forged carving hatchet from
Svante Djrv, which is particularly handy
for detail work but can also be used for
roughly shaping smaller objects. Double
bevel. Serrated handle. Well-proportioned, handcrafted carving hatchet.
Textured handle.
Head weight ^&
Blade length 70 mm
Overall length ^&
No. 701572
"2 114.90
C |`Z]`Z
Z3\Z~`Z\;
Carving hatchet with medium-weight
head for smoothing surfaces and creating
wavy surface patterns as well as for rough
and fine sculpting. Forged by hand under
a spring hammer. Carved, red beech
handle with a good grip and a specially
shaped end to prevent slippage.
Comes with leather sheath.
Head weight 450 g
Blade length 80 mm
Overall length ^2
No. 701599
_'"" 94.00
Adzes
The adze has always been an important and highly versatile tool for carpenters, cabinet makers, boat builders and sculptors alike, and different
versions have therefore evolved for different purposes. They are used for
hollowing-out often large objects such as troughs, smoothing, and other
large-scale carving projects. The most important detail of a good adze is
the right combination of form and length of the handle, which must
suit the shape of the head. But also the bevel must be customised for
the individual application. An inside bevel allows the adze to be applied
precisely, while an outside bevel drives the blade quickly out of the wood
again for rough work. All our adzes are made of carbon-steel.
E
Flat Adzes
Flat adzes are used to flatten and smooth planes. These planes may be
finished later or keep their characteristic hewn surface. Therefore these
adzes usually have an inside bevel.
Satisfaction
E ~];[#\{;{
]\\{;=Z[;;~&
Robust, drop-forged adze with untreated
ash handle. Inside bevel for precise
cutting action due to straight contact
surface.
Blade width 75 mm
Overall length 2
Total weight 1000 g
No. 700941
2'^ 81.30
F
;#\{;{
]\\{;=Z[;;~^
Hand-forged:
This flat adze is hand-forged in free form
in a German smithy, based on a design
by our master sculptor. The head has
$^%=
smoothing surfaces easier. Inside bevel
for precise cutting action due
to straight contact surface.
G u ar an t e e
67
Sculpting Tools
3. Type of bevel:
a) Outside bevel:
]
^
kind of lever.
shows an exaggerated
version of this. Simi-
] ^
trough-makers adze
its use.
works perfectly.
to an axe.
b) Inside bevel:
&
c) Combined inside
by an x in the drawings) which runs along the
=
7=
this allows a combinatop of the blade, this shows the curve in which
$
&%
almost impossible to apply the adze with pre- tion, outside bevel to prevent the adze from
68
Sculpting Tools
A |`Z]`Z
[#\{;{]\\{;
This hand-forged adze is mainly used for
smoothing surfaces on beams and for
removing large amounts of stock. The
long handle allows you to hew the beams
or boards while standing. Inside bevel
for precise cutting action due to straight
contact surface.
Blade width _^
Overall length 2
Total weight 1500 g
No. 701598
&'^ 219.00
B ~];[#\{;{||;#
Z\~;{\{;=Z[;;~_
Robust, drop-forged adze with untreated
ash handle. Inside bevel for precise
cutting action due to straight contact
surface.
Blade width 70 mm
Overall length 2
Total weight 1000 g
No. 700942
__' 92.60
D
C [#\{;{||;#
Z\~;{\{;=Z[;;~'
Hand-forged:
This adze, which is hand-forged to our
design in a German smithy, has an inside
bevel which allows precise application
because the contact surface is not angled. The wide, slightly curved blade pro-
G u ar an t e e
G u ar an t e e
D |`Z]`Z [#\{;{
||;#Z\~;{\{;=Z[;;~_
Hefty hand-forged adze with an extralong handle, ideal for hollowing chair
seats while standing up. The chair seat is
fixed to the floor, the feet are positioned
to the left and right of it and the adze is
swung through the legs. Outside bevel
combined with a slight inside bevel for
rough material removal. This drives the
blade quickly out of the workpiece again.
Handle of oiled hickory.
Blade width 70 mm
Overall length 2
Total weight 1500 g
No. 701585
&"^' 230.00
69
Sculpting Tools
One-Handed Gouge-Shaped Adzes
One-handed gouge-shaped adzes are particularly suitable for detail work
and use close to the body, such as hollowing out bowls, sculpting or
working on chair seats on the workbench.
A ~];;#\{;{||;#
Z\~;{\{;=Z[;;~'
Small drop-forged one-handed adze with
untreated ash handle. Inside bevel for
precise cutting action due to straight
contact surface.
Blade width 50 mm
Overall length _
Total weight 2
No. 700944
__' 92.60
B \`ZZ;#\{;{
||;#Z\~;{\{;=Z[;;~^
3;`||Z[;;~2
Handy, hand-forged Swedish adze with
a low sweep for rough material removal.
Outside bevel combined with a slight inside bevel to drive the blade quickly out
of the workpiece again. Optimally curved
head shape. Handle of oiled hickory.
Blade width 2
Overall length ^
Total weight 790 g
No. 701520
&22 196.90
D |`Z]`Z;#\{;{
||;#Z\~;{\{;=Z[;;~'
Small hand-forged one-handed adze
with a combined inside/outside bevel for
rough material removal. This bevel drives
the blade quickly out of the workpiece
again and prevents the adze getting
stuck. The head has an optimally curved
shape and the textured handle of oiled
hickory provides a non-slip grip.
Blade width 2
Overall length
Total weight 750 g
No. 701584
&'' 189.00
Satisfaction
C
;#\{;{
||;#Z\~;{\{;=Z[;;~'
Hand-forged:
This one-handed adze, hand-forged to
the design of our master sculptor, is impressive in its flexible handling and solid
design. The two shaped hand rests on the
hand-made handle allow you to quickly
change from rough material removal to
fine detail work (with your hand close to
the head of the adze). Ideal for all kinds
of sculpting. Inside bevel for precise
cutting action due to straight contact
surface. Handmade handle of oiled ash.
Blade width 70 mm
Overall length 400 mm
Total weight '2
No. 706052
&"&2 129.90
G u ar an t e e
Trough-Makers Adzes
These classic one-hand, hammer-forged adzes are produced to the specifications of a master sculptor, who also attaches the handles. They have
an ideal shape for carving out troughs and large bowls. Their light weight
also makes them suitable for wood sculpting. Oiled ash handles.
Satisfaction
E
TROUGH3\;`Z\{;=Z[;;~_
Hand-forged:
This small one-handed adze has been
forged based on an old model and is a
true rarity. The strongly curved handle is
ideal for easily carving out narrow bowls
and deep troughs. The adze, which is
manufactured to a design of our master
sculptor, has a high sweep and large
width, which also makes it ideal for
smoothing surfaces. Inside bevel for
precise cutting action due to straight
contact surface. Handmade handle of
oiled ash.
Blade width 80 mm
Overall length &
Total weight 990 g
No. 706053
& 180.90
G u ar an t e e
70
Satisfaction
F
TROUGH3\;`Z\{;=Z[;;~
Hand-forged:
Hand-forged in Germany to a design of
our master sculptor. With its light weight
and specially shaped curved handle, this
adze is ideal for carving out deep vessels
such as troughs and bowls. The bent
handle helps to protect your wrist while
working and allows narrow strokes. Inside
bevel for precise cutting action due to
straight contact surface. Handmade
handle of oiled ash.
Blade width 2
Overall length '
Total weight 2
No. 706066
&&_2 139.90
G u ar an t e e
Splitting Wedges | 76
Garden Hatchets | 76
71
Grnsfors Bruks
Aberl
Japanese Axes
7#
years.
20 years
warranty
An axe features:
#
7
]
2#_`/
#
niques.
hammer
]
2#_`
#
bon steel
?
white oak
head
head
Forger's initials on each axe
bon steel
leather sheath
leather sheath
(*unless otherwise stated)
Satisfaction
G u ar an t e e
{3Z\Z]\|\`\;;
All products with this logo can be tested thoroughly for 15
=
@
@&
Sharpening Pass
\{;#]|PASS
Sharpening Service
handle within a few days. All you pay is the cost for the
This service is available for all axes and hatchets in this chapter.
72
B |`Z]`Z
Z3\]`;Z\;
Long forestry axe with wellbalanced head weight for
limbing felled trees.
The axe's eye is extended
at the sides to prevent the
handle from breaking and
for better weight distribution
to allow accurate blows.
Blade length 90 mm
Overall length 2_
Head weight 900 g
No. 705961
__ 86.00
Sharpening Axes
A |`Z]`Z]`;Z\;
Compact yet robust axe for light
forestry work such as limbing small logs
or gathering firewood. The axe's eye is extended at the sides to prevent the handle
from breaking and for better weight
distribution to allow accurate blows.
Blade length 80 mm
Overall length 500 mm
Head weight 700 g
No. 705973
2'_ 81.00
(For more information see page 5).
C
C |`Z]`Z];|\;Z
Large axe, traditional American design,
for chopping and limbing trees. The slender blade with small wedge angle drives
deep into the wood, while the S-curved
butted shaft makes work effortless.
D |`Z]`Z
{<;#<;{];|\;
Axes featuring a cutting edge on each
side of the head were already the tools
of choice for Canadian loggers 100 years
ago. Not only do two cutting edges allow
you to work for longer periods of time
without interruption but the edges can
be sharpened to different bevel angles
depending on the application (small
angle for maximum cutting performance,
large angle for heavy-duty use).
Straight handle with thicker butt end.
73
Hand-forged
axes can be
distinguished
by their surface
structure. Forging
by hand compacts
the material's
icrostructure,
which makes the steel considerably
more stable.
(For more information see page 5).
A
B
A \<;`3\;\;
Hand-forged:
Because of its heavy, flat-ground butt,
this axe is often used by professional
lumberjacks to drive in felling wedges.
The massive, robust blade is perfectly suited for removing branches of
felled trees. The ergonomically curved,
handmade hickory handle allows hours
of fatigue-free work and, thanks to its
length, gives extra drive to the axe head.
\
?@`
Blade length 150 mm
Overall length 800 mm
Head weight 1800 g
No. 708356
& 169.00
B \<;`[;`{;];Z;`]`;Z\;
Hand-forged:
This axe is extremely comfortable
to hold and is especially suited for
light-duty forestry work, such as removing
branches from the stem of a felled tree.
The handmade, ergonomically shaped hickory handle allows fatigue-free working.
Blade length 140 mm
Overall length 2
Head weight 1100 g
No. 708357
&^^2& 159.00
D
C
C \<;` ]`;Z\;
Hand-forged:
This hatchet is especially suited for
cutting off smaller limbs and is an ideal
companion for all outdoor activities and
forestry. The handmade and ergonomically shaped hickory handle makes it a
pleasure to use.
Blade length 115 mm
Overall length 400 mm
Head weight 1100 g
No. 708354
& 169.00
D <\`Z`\~;`\[\3
Japanese drawknife for removing bark
and smoothing logs. Wear-resistant steel
blade, handle of Japanese white oak.
Blade width 45 mm.
Blade length &
Overall length _^
No. 717920
^^^ 39.90
F \~\;Z;Z~|\;
For splitting medium and thick crosssections and driving in wedges. The
highly convex head guarantees maximum
splitting power. The three-layer blade
with a hard carbon-steel core
$'#2` %
suitable for shredding work.
Has a large hardened striking
surface. Long, unvarnished
shaft of Japanese white oak.
Head weight 1500 g
Blade length &
Overall length 900 mm
No. 701661
"&2 109.00
74
Soft iron
E `\{\\~\;Z;
Z~|\;
Ideal for chopping firewood:
Splitting axe with incredible power
thanks to its elongated, highly
convex head and long handle
made of fine-grained Japanese
white oak. The high-carbon steel
$'#2`%
^##
ered head will remain sharp even
when splitting knotty hardwood.
Double-bevel.
Head weight &^
Blade length 75 mm
Overall length 900 mm
No. 710819
"&2 109.00
G \~\;Z;3Z~|\;
Little effort - striking effect:
Hand-forged splitting axe ideal for
splitting kindling and small logs.
Highly convex elongated head shape, cutting wedge made of White Paper Steel,
body of impact-absorbing soft iron.
Head weight 400 g
Blade length 50 mm
Overall length ^^
No. 701659
'' 105.00
Wood-chopping tips:
The thick heads of these axes have wide flaring cheeks and progressively increasing wedge angles to ensure maximum splitting power. The
shaft has an iron sheath to protect it from wear and is textured at the
end to provide a more secure grip.
A |`Z]`Z
\`|;Z~|\;=
|\{;
;?
# =
handle for additional
swing or for splitting
logs that lay horizontal
on the ground.
Head weight
Blade length 75 mm
Overall length 790 mm
No. 705991
"&2 109.00
B |`Z]`Z\`|;Z~|\;=
Z\{\`{\{;
Standard handle with a slight curve
at the end to prevent slippage.
Head weight
Blade length 75 mm
Overall length 700 mm
No. 705962
'"' 106.00
C |`Z]`ZZ3\Z~|\;
For splitting small and medium
rounds.
Head weight 1000 g
Blade length 70 mm
Overall length 590 mm
No. 705979
'^&" 99.00
Price
advantage!
E |`Z]`ZZ~|\;
In spite of its small size, this splitting
axe has great splitting power with its
weighty, 1000 g, highly convex head.
Its handy shape makes it ideal for small
to medium rounds and making logs for
firewood. The hickory shaft, which is
textured at the base for better grip, can
also be used one-handed if necessary.
Head weight 1000 g
Blade length 70 mm
Overall length 480 mm
No. 701592
_'"" 94.00
F |`Z]`ZZ~|\;\{
{\3{[;Z;Z;
Z?$ _&"%
DMT fine-grain diamond whetstone
$ _^'2%
service life (also perfectly suited for other
cutting tools). Comes in leather case,
&&&?^?
No. 718929
"_ 109.80
G \<;`[;`{;];Z;`
{|Z~;`
Splitting dry pine into kindlings becomes
a real pleasure with this tool. Can be
mounted on the wall. The notches in the
wooden base, which is made of untreated
ash, hold any piece of wood securely in
place. Almost no cutting force is needed
thanks to the long lever.
\
?@`
Head weight &
Blade length ^
Overall length 2'
No. 708359
& 179.00
75
Splitting Wedges
A Z\];Z~|[;{|;=3\{;]\33
In former times axes were used to cut down trees, but nowadays these have been replaced by chain saws. This rapid development
also affected splitting wedges. The oldest models, usually made of wood, have been replaced by low-wear splitting wedges made
of steel. Now engineering has taken another step: Safety splitting wedges are made from extremely impact-resistant, forged aluminium. They do not splinter and are no risk for chain saws. At the same time they are very light and protected against corrosion.
B
A
1
B |`Z]`ZZ~|[;{|;
Maximum splitting power thanks to slight
axial twist. Notched faces. We recommend using two wedges for large blocks.
Warning: Never strike steel against steel!
Width 40 mm
Length
Weight 1700 g
No. 705965
&&' 49.00
Garden Hatchets
C
Z;;\;`
This tool is designed for clearing undergrowth and containing rank growth. Due
to its long cutting edge, you can also
7
diameter from a safe distance. The handmade, untreated ashwood handle with its
rounded end allows the tool to be held
firmly and safely
without slipping.
\
?@2`
Head weight 750 g
Blade length ^
Overall length 910 mm
No. 708360
'^&" 99.00
Satisfaction
G u ar an t e e
76
Nata are machete-like axes equipped with extremely sharp forged blades.
In Japan, they are mainly used in the garden for limbing and trimming trees
and bushes.
E NATA JIGATA
Cleaver made from high-carbon steel for
gardening and forestry. The blade has
a single right bevel, allowing cuts to be
made flush to the trunk. Comes with a
sheath and belt loop.
Head weight 2
Blade length &
Overall length ^"
No. 710804
2_& 79.90
F NATA AZUMAGATA
Powerful cleaver made from carbonsteel. Double-bevel. Can also be used for
splitting wood.
Head weight 750 g
Blade length &^
Overall length ^2
No. 710803
&"^ 49.90
G SILKY YOKI
Robust, ergonomic garden knife for
thinning out brushwood and clearing
uncontrolled growth. Thanks to a special
steel alloy, these knives have a relatively
thin and therefore light blade which still
withstands heavy-duty use. Removable
rubber handle shells reduce the impact
77 2
because they absorb the blow better than
conventional wooden handles.
Comes with a high-quality canvas sheath.
Weight 510 g
Blade length ^
Overall length 480 mm
No. 710828
_'_ 92.90
A
A [;;`|ZZ`\\;
This axe is ideal for camping and outdoor
pursuits. With its rather straight blade,
similar to a carpenters axe, it is perfect
for cutting wood joints, e.g. when building a shelter. The slightly larger angle
combined with the two-handed handle
B \`|;\~\;Z;
\#~`~Z;\;
Hatchet with double bevel and slighly
curved edge. Small socket for increased
stability. Thanks to the single-sided
beard, which protects the fingers, this
hatchet can also be held with one hand
near the head, for example for finishing
work. Made from forged malleable
cast iron.
Head weight 750 g
Blade length &
Overall length ^2
No. 710807
^' 65.90
C \~\;Z;\#~`~Z;\;
Handy and compact:
Lightweight hatchet for woodworking, outdoors and woodcarving.
Tomahawk-shaped head with a curved
blade and hardened poll. Double-bevelled
face. Forged from mono carbon steel.
Head weight 450 g
Blade length 75 mm
Overall length ^^
No. 710821
" 65.80
D Z3\\~\;Z;\#~`~Z;
\;
All-purpose hatchet with small socket and double bevel. Thanks to
the straight edge, it can also be used for
trimming and shaping workpieces. The
single-sided beard protects the fingers
when held with one hand near the head.
Made from forged malleable cast iron.
Head weight ^
Blade length 95 mm
Overall length ^^
No. 710806
^^^ 39.90
E |`Z]`Z3\;
Grnsfors Brukss smallest axe, perfect
for gardening, fishing, trekking or
sculpting.
Head weight
Blade length 2
Overall length 2
No. 705989
__ 86.00
(For more information see page 5).
F |`Z]`Z{`\;
This axe model was inspired and
co-developed by renowned Scandinavian
survival expert Lars Flt.
The handy design with iron sheathed
handle is well-balanced, fits into any
backpack and expertly handles any
outdoor task.
Head weight ^
Blade length 2
Overall length ^_
No. 705992
'"' 106.00
The handles of Grnsfors axes are fitted and wedged in a hydraulic press.
77
A |`Z]`Z\{\;
Whether for making kindling or for small A
jobs around the garden, this hatchet is
always a handy tool. The compact size
means it fits easily in backpacks and
toolboxes.
Head weight 450 g
Blade length 80 mm
Overall length
No. 705963
2&' 74.00
C |`Z]`Z;`Z\;
The head is forged thinner than
usual, slightly rounded and polished for skinning animals. This axe
can be used to hew wood, cut up game
and cut through bone. The grip of the
handle is textured for better handling.
Head weight 2
Blade length 80 mm
Overall length 475 mm
No. 705967
'_^" 104.00
B |`Z]`Z[{];\;
Handy axe with surprising power,
perfect for the full range of outdoor activities.
Head weight 450 g
Blade length 80 mm
Overall length ^2
No. 705960
'' 70.00
D |`Z]`Z
{<;#<;{`[|\;
Originally a workers pastime, today axe
throwing is a popular Scandinavian sport,
which trains both your body and your
concentration. With instructions.
Straight handle (regular butt end).
Head weight &2
Blade length 150 mm
Overall length 750 mm
No. 705971
&__^ 152.00
E |`Z]`Z{\`\{;\;Z
Universal application:
From the early 17th century,
;]
?
carried so-called trade axes with them
to exchange with the native Americans
living in the New World. They were
popular amongst the native Americans
due to their handy size and versatility in
building shelters and tools, general woodworking and slaughtering animals. The
practical plug join between the handle
which thickens at the end and the mortise of the head make it easy to dismantle
the axes for transport or sharpening. The
cutting edge and head are forged from
one piece of steel, the ash handle is
manually fitted.
78
(For more information see page 5).
1 English model
With a heavy head and slightly bearded
blade.
Head weight 500 g
Blade length 90 mm
Overall length 500 mm
No. 701595
&_&^ 204.00
2 French model
Featuring a curved, particularly lightweight head and a shearing cutting
action.
Head weight ^^
Blade length 80 mm
Overall length 500 mm
No. 701593
&_&^ 204.00
A |`Z]`Z<`\{\;=
&"=Z|;<;;
Thin blade with a wide beard and a
single bevel, slightly tilted blade.
Bevel right
The beam is to the left
of the axe.
Head weight &^
Blade length 175 mm
Overall length 490 mm
No. 705968
&2_^ 199.00
B |`Z]`Z<`\{\;
&"={<;<;;
Ideally suited for joint work.
Specifications as left but with
a double-bevelled blade and
a symmetrical head.
Head weight &^
Blade length 175 mm
Overall length 490 mm
No. 705986
&2^ 186.00
Bevel left
The beam is to the
right of the axe.
Head weight &^
Blade length 175 mm
Overall length 490 mm
No. 705972
&2_^ 199.00
Hewing tips
C |`Z]`Z DANISH
{<;#<;\`{;{\;
;
? ?
#
long beards, ideal for hewing beams and
boat planks. The head is offset to the
left (right bevel); the handle is slightly
curved and textured for a better grip.
The original is on display at the Roskilde
Viking Museum. Comes without leather
blade sheath.
Head weight 1100 g
Blade length ^_
Overall length 2
No. 705578
^^_ 409.00
D |`Z]`Z|\{\;
Handy axe from the Viking period:
This axe is a replica of an original
Viking axe. It is well-suited for shaping
wooden equipment, carpentry and sculpting. Hand-forged head with an inserted
cutting-edge bit made from high carbonsteel. Double-bevel.
Head weight 700 g
Blade length 110 mm
Overall length ^'
No. 701582
'^ 338.00
E |`Z]`Z\`~;;`Z\;
The thin blade and straight edge of this
axe make it perfect for shaping work
pieces. The small beard allows the axe to
be gripped close to the head.
Head weight 700 g
Blade length 90 mm
Overall length 450 mm
No. 705974
__ 86.00
Workshops
Cutting out gutters and water
conduits
Setting tool handles by hand
Shingle cutting
F \~\;Z;\`~;;`Z\;
Wood crafts in harmony with nature:
Hand-forged Carpenter's axe with curved
head, wide beard and narrow throat for
joining work and hewing and trimming
trunks and beams. The red painted
indentation on the blade, which is characteristic of this axe type, has a religious
significance in Japan. The irregular
recess represents the fallibility of all
79
Satisfaction
A
<`\{\;
Hand-forged broad axe
based on a historical model, which,
over decades of daily use, has proven
the most effective tool for hewing logs
and beams. The blade acts as a large
rest, which allows ultra-smooth surfaces
even on large beams. The cutting edge
is slightly curved, so that only part of the
blade penetrates the wood, which also
makes it easier to work with. The blade
has a single bevel on the side of the projecting head, and is securely set in the
ash handle with cross-wedges. To protect
the knuckles, the handle, handmade and
fitted by a wainwright, is cranked.
G u ar an t e e
B
{<;#<;{3`Z;\;
Hand-forged:
This hand-forged double-bitted mortise
axe, symbol of the carpentry trade, is a
combination of a mortise axe and a mortise chisel and is used to make mortises.
An axe-shaped cutting edge, partially
ground on both sides, at one end and a
#
"
and bevelled on the other, makes this
tool highly versatile. Both cutting edges
become narrower towards the socket to
allow working of mortises in full depth.
2?2
Head weight &
Blade length
No. 708363
& 169.00
Bevel right
The beam is to the
left of the axe.
Head weight ^
Blade length ^^
Overall length 2^
No. 708365
^^" 399.00
Bevel left
The beam is to the
right of the axe.
Head weight ^
Blade length ^^
Overall length 2^
No. 708367
^^" 399.00
C
LOG DOG
]
square bar steel with hardened cutting
edges which are set perpendicular to
one another.
Weight 900 g.
Overall length
No. 705983
&2_ 19.90
Satisfaction
G u ar an t e e
Satisfaction
G u ar an t e e
C
DICTUM satisfaction guarantee
Satisfaction
G u ar an t e e
Satisfaction
D
Z~|];
This splitting knife excels through its shape, which has been developed and improved
over many centuries. The turned, untreated handle with cross-wedging is fixed in the
conical eye of the iron, and due to its shape is very comfortable to hold. The cutting
edge, which is made of carbon-steel with approx. 55 HRC easily splits shingles and
7Z
_2'&
G u ar an t e e
2 Long
Head weight 1500 g
Blade length ^^
No. 708362
_"'^ 95.00
1 Standard
Head weight &
Blade length 2
No. 708361
__" 89.00
E
3`Z;\;
Designed by our master carpenter based
on a historical model, this hand-forged
axe is suitable for trimming wood joints
and mortises. The slightly conically forged blade has an even-ground back and a
slightly curved bevel. The narrow side of
the blade is ground evenly to align across
surfaces. Untreated ashwood handle.
Head weight &^
Blade length 2
Overall length 405 mm
No. 708364
__" 89.00
G u ar an t e e
Satisfaction
80
Lie-Nielsen Planes | 84
Veritas Planes | 90
DICK Planes | 91
Kunz Planes | 93
Anant Planes | 94
Japanese Planes | 95
81
Planes
Wooden planes
Japanese planes
Metal planes
Advantages
Advantages
Advantages
7
7
#7>
Disadvantages
Disadvantages
Z
7
[
* SCRAPING PLANES
* BEVEL DOWN
drock Design, which enables the frog position Full blade support
The frog provides a smooth and large seat
7 7
?
[?
-
minimum.
Additional weight
cutting depth
82
Planes
* BEVEL UP
CUTTING ANGLE
stable cutting angle. Because the bevel angle blade angles be used?
on the blade affects the cutting angle, the
plane can be optimised by altering the bevel
No chipbreaker
The chipbreaker, which usually adds stiffness [=7
to the blade, is missing on bevel-up planes.
Thicker blade
chatters less.
of the wood.
stance.
Cutting angle 50-60
7
7
stability.
quickly.
by a raised burr)
bevel-up planing.
ones.
to plane.
83
Planes
Based in the US, Lie-Nielsen specialises in re-introducing and improving
traditional plane types. Lie-Nielsen makes its tools from only the finest
materials, many of which had previously been too expensive, not yet fully
developed or unavailable in suitable tool-making quality. Today, Lie-Nielsen
7
\=
=7
^ '
7
{
=7
?2`7
to low-temperature treatment (cryogenic hardening) for an even finer grain and enhanced durability. Plane
bodies are made of stress-relieved, wear-resistant spheroidal cast iron, which is highly resistant to cracking and
absorbs vibrations.
Bevel Up Planes
Handy precision planes with polished cap irons made from bronze. The
stainless steel adjuster allows accurate adjustment of the thick blades
with minimum backlash.
A
A ;#;Z; ~\3~\;=
NO. 100
This replica of the Stanley 100 performs
all precise craft carpentry, model-making
or music instrument-making work effort^=7
#
resistant blade, tongue-shaped handle
and bronze cap. The curved sole design
is suitable for concave surfaces. Pitch of
&=7
Flat
No. 703775
703776
Concave No. 703777
Repl. Blade No. 703778
Repl. Blade No.
2_"'
'
'_&
_2
80.90
24.80
102.00
32.90
B ;#;Z; <~\;Z
&
For fine cuts and end grain. Bevel angle
`
^_
Blade angle &
Blade width ^
Blade thickness ^
Overall length &^
Weight
Plane body
125.00
119.00
32.90
59.90
C
C ;#;Z; <~\;Z
&^
For heavier cuts with the grain. Bevel
`
Blade angle
Blade width ^
Blade thickness ^
Overall length &^
Weight
No. 703702
& 125.00
Repl. Blade No. 703722 _2 32.90
Toothed Bl. No. 703739 ^ 59.90
D ;#;Z;<~\;Z
"&\{2&
A solid body, precise blade guide and
adjuster, and an accurately positioned
bronze chipbreaker with polished hand
grips guarantee
convenient operation and perfect results. The
mouth opening
can be adjusted
according to the
application, using the configurable shoe
(for removing thick or thin shavings).
84
E ;#;Z; 2&`
`\<<;<~\;=;`;{
This plane is ideal for cutting rabbets or
trimming tenons to fit. The low cutting
& ?
choice for end grain. Fine blade adjustment mechanism, non-adjustable mouth,
<`
^_
Blade width 44 mm
Blade thickness ^
Overall length &2
Weight 770 g
No. 703792
&"' 189.90
Repl. Blade No. 703771 ^2'" 43.90
F ;#;Z; Z;~\;
"_&
Special plane for smoothing wood joints,
rabbets, corners etc. Heavy blade on
finely-milled bed, knurled screw for
~
&<
`
<
7
Blade width 45 mm
Blade thickness 4.8 mm
Overall length &2
Weight 2^
No. 703707
&__^ 152.00
Repl. Blade No. 703727 ^2 43.10
Planes
A ;#;Z; `\<<;~\;Z
When they were first introduced by
Preston in the late 19th century,
these rabbet planes represented a major
breakthrough in plane design. Record
continued making these planes until
a few years ago. Now, Lie-Nielsen has
begun manufacturing its own version
with the same quality as its predecessor.
The mouth, easily adjustable using a
setscrew, and the precisely machined,
box-shaped body make these planes the
tools of choice for fitting and finishing
shoulders, rabbets, tenons and grooves.
<
~
&'=
7`
^
1
B ;#;Z;[\|;
Z3|~\;
&2\{2
Lighter than the conventional bench
planes, these devices have a thicker
blade and no chipbreaker, making them
easier to set up. The blade is held in the
bed with the bevel facing upwards. This
makes the cutting angle easy to adjust.
The plane body and blade support are
cast from a single piece for greater plane
stability and, thanks to the front handle,
the mouth is easy and convenient to
adjust. Brass caps.
85
Planes
A ;#;Z; [#\|;
;`~\;
Its low-angle design and the long base
make this jointer plane the ideal tool for
joints and fittings but also for use with
a shooting board. In addition, its length
makes it an excellent tool for trueing
large work pieces. The mouth opening is
adjusted with two set screws. The blade
7#7&
7=
^_
Blade width 58 mm
Blade thickness 2
Overall length 2
Weight ^^
No. 702996
^&2' 359.00
Repl. Blade No. 702997 ^ 59.90
Bevel Up Planes
7
>
Z
by changing bevel angle
B
B ;;Z;Z`;[{`;`Z]`
\{Z|~\;Z
;?#
settings of Lie-Nielsen planes. Adjustment screws for chipbreaker, cap and
frog can be turned easily without damaging the material. Stainless steel blades,
handles of figured and stained maple
with brass ferrule.
86
C ;#;Z; `3;`~\;"
The perfectly flat sole and perfectly
square sides make this plane well suited
for even the most demanding work
on end grain, side grain and mitred
surfaces. The lateral guide knob can be
used on either side in conjunction with
a shooting board. The mouth opening
can be adjusted via a sliding plate.
The 4 mm thick blade can be precisely
adjusted to the nearest hundredth of a
millimetre, even while planing. Pitch of
=7`
Blade width 50 mm
Blade thickness 4.8 mm
Overall length _
Weight ^
No. 703743
^^" 399.00
Repl. Blade No. 703744 && 48.80
D ;#;Z; <|`;`~\;
Designed based on an early Stanley
version, this router plane is very useful
for planing precise mortises, grooves
and other recessed areas. The improved
depth-stop and fine blade adjustment
allow for precise adjustments of the
square-shaped and therefore directionally
stable guided iron. The blade can be
fixed centrally (normal position) or close
to the edge for working corners.
An included fence is fixed through
elongated holes to the cast iron body and
can be turned around for guiding along
curved edges.
?"
Planes
A ;#;Z; Z3|~\;
The standard smoothing plane is capable
of taking the finest shavings from the
most difficult woods.
Blade width 50 mm
Blade thickness ^
Overall length
Weight &
Plane body
322.00
376.00
43.10
69.90
B ;#;Z;
Z3|~\;
The ultimate smoothing plane, thanks to
a large sole, extra-thick vibration-absor7^27
Blade width 2
Blade thickness ^2
Overall length 2
Weight
No. 703751
"^' 349.00
Repl. Blade No. 703752 & 53.80
2
C ;;Z;|#\|;]`|
High-angle frog for smoothing difficult
wood. Thanks to these replaceable
frogs, the cutting angle, which is usually
7=7
;
planes (e.g. Norris).
Blade width 50 mm
Blade angle
1 No. 717888
2 No. 717887
_" 84.00
22^" 79.00
1 No. 717886
2 No. 717885
__" 89.00
__" 89.00
D ;#;Z; \~\;
The increased length and weight compared to the No. 4 plane makes it ideal, not
only for smoothing but also for levelling
surfaces.
Blade width 50 mm
Blade thickness ^
Overall length ^
Weight
No. 703715
"^' 349.00
Repl. Blade No. 703735 ^2 43.10
Toothed Bl. No. 703738 '_ 69.90
87
Planes
Lie-Nielsen Bench Planes No. 4,
No. 4 1/2, No. 5, No. 6, No. 7
The all-purpose woodworking
plane. With its Bedrock design, this
plane allows chatter-free cutting
thanks to its fully supported blade
and a mouth that can be adjusted
without removing the cap iron and
blade. Additional lateral blade
adjustment and the low blade-feed
adjuster allow the cutting depth
to be changed during planing. Its
heavy weight makes irregular grain
or difficult woods easier to work.
Brass frog and cap.
A ;#;Z;]`;~\;2
Size midway between a jack plane and
a jointer plane. Ideal for trueing, and
joining of medium-sized boards.
]
?
Blade width 2
Blade thickness ^2
Overall length 450 mm
Weight ^^
No. 703759
^^" 399.00
Repl. Blade No. 703752 & 53.80
B
C ;#;Z;<;`\<<;~\;
This reproduction of a Stanley 10
1/4, which had not been made
since the Second World War, and
had never been made in the Bedrock design, is the largest rabbet plane
of its kind. Like the long jack plane, it is
suitable for trueing as well as smoothing,
thanks to the large base. Its additional
function as a rabbet plane makes it
one of the most versatile planes on the
market. The two knife-shaped
nickers, which are fitted flush
to the sides of the tool, allow
cross-grain cutting with no
tear-out. The front knob can
be tilted to easily guide the
tool in corner cuts.
Blade width 45 mm
Blade thickness ^
Overall length ^
Weight ^
No. 703764
^^^ 385.00
Repl. Blade No. 703765 2&^ 54.90
D ;#;Z;|;
\{|`;~\;'
Combination plane for making tongue
and groove joints. Once you have planed
the tongue, you can cut the groove
simply by swinging the fence. There is no
need to change the blade or adjust the
cutting depth. For groove depths of up
to 10 mm. Width of tongue and groove
23
&"
mm stock.
Blade width 19 mm
Blade thickness 4.5 mm
Overall length 2
Weight &^
No. 703009
&_'' 209.30
Repl. Blade No. 703049 ^2_ 43.40
88
B ;#;Z;;`~\;_
Most popular jointer size, excellent for
trueing and for making fitting and joint
surfaces. Flatness tolerance max.
Blade width 2
Blade thickness ^
Overall length 550 mm
Weight ^_
No. 703753
^__^& 449.00
Repl. Blade No. 703752 & 53.80
Planes
Scraping Planes
Z
without tear-out,
even on difficult
woods
#
edge burr
A ;#;Z;
SCRAPING ~\;&
For working thin or small pieces made
of hardwood such as fly rods, violin
bows, frames. Hardened blade (50-55
`%7
displacement. For preparing veneer
surfaces, we recommend toothed blades.
\77$_#&%
Blade width ^
Blade thickness ^
Overall length &^
Weight 2"
Plane body
B ;{<\{;]`;#;Z;
Z`\~|~\;&
Blade width ^
Blade thickness
1 mm
No. 703732
1.4 mm No. 703731
2_ 48.40
2_ 48.40
C ;#;Z;
Z`\~|~\;&&
Wide-bladed scraping plane ideal for finishing large surfaces such as table tops,
parquet etc.. Hardened blade (50-55
`%7
displacement. For preparing veneer
surfaces, we recommend toothed blades.
\77$_#&%
Blade width 70 mm
Blade thickness ^2
Overall length ^
Weight 1800 g
No. 703717
&&_2 252.00
Repl. Blade No. 703718 ^2&^ 43.00
D ;{<\{;]`;#;Z;
Z`\~|~\;&&
Blade width 70 mm
E ;#;Z;\<;
3\;`ZZ`\~;`'
Universal scraping plane with full-width
blade for smoothing surfaces, rabbets
and shoulders. The tilting knob and
handle provide a secure and comfortable
grip in any work situation. The blade is
bedded directly against the body, greatly
reducing any tendency to chatter.
<_
<
Blade width 51 mm
Blade thickness ^
Overall length &
Weight &
No. 703056
&" 229.00
Repl. Blade No. 703059 ^2&^ 43.00
Blade thickness
1 mm
No. 703761
1.4 mm No. 703760
'_ 69.90
'_ 69.90
Spokeshaves
control
]
= ?
concave surfaces
F ;#;Z;
<;\{|22
Scraping plane with 8 profiled blades
$&2
G ;#;Z;
<||ZZ~;Z\;
Precision-made spokeshave with an
extremely small mouth, created by
Lie-Nielsen in collaboration with master
chair-maker Brian Boggs. Ideal for round
and concave surfaces from chair parts
Blade width 50 mm
Blade thickness ^
Overall length 2
Weight ^
Base
Flat
89
Planes
Planes
The corporate philosophy of Canadian tool manufacturer Veritas
aims to develop new adjustment
mechanisms and enhance historic
plane design. With bodies made
of stress-relieved spheroidal cast
iron, these tools are highly resistant
to cracking and distortion. Their
soles are perfectly plane and trued
at right angles to the sides. Their
7
#
\
2#2`
and additionally subjected to a
special low-temperature process to
achieve a finer grain. Two setscrews
on the sides constrain the blade
laterally, keeping it in place regardless of the type of stress applied.
Unless otherwise specified, the
7[
material combination of finelyground or black-coated cast iron
bodies, polished brass setscrews
and beautiful bubinga handles,
these planes are also pleasing to
the eye.
B
1
Bevel Up Planes
7
>
Z
by changing bevel angle
A ;`\Z \~`~\;
Ideal for cabinetmakers, instrument
makers and restorers. Central setscrew
for iron depth and lateral adjustment.
Non-adjustable mouth. Pitch of the
&=7`
^_
Blade width ^&
Blade thickness
Overall length 140 mm
Weight
No. 703695
'^&" 99.00
Repl. Blade No. 703696 ^ 27.90
B ;`\Z<~\;
Compact all-round planes for fine
shavings. The mouth opening can be
adjusted according to the application,
using the configurable shoe (for removing
thick or thin shavings). The indentations
in the sides make it easier to guide this
handy plane accurately. Central setscrew
for iron depth and lateral adjustment.
1 Block Plane 20
Z
7 ]
<
`
Blade angle
Blade width 40.5 mm
Blade thickness ^
Overall length &2
Weight 800 g
No. 703692
&& 149.00
Repl. Blade No. 703694 ^^^ 39.90
2 Block Plane 12
#7 &]
<`
^_
Blade angle &
Blade width 40.5 mm
Blade thickness ^
Overall length &2
Weight 800 g
No. 703693
&& 149.00
Repl. Blade No. 703694 ^^^ 39.90
C ;`\Z[#\|;
Z3|~\;
For planing difficult grain, end grain,
cross-grain or knotty wood. The front
handle allows easy and convenient
adjustment of the plane mouth. Thanks
to the central adjusting screw, the blade
feed and lateral position can be adjusted
>
<&
E
1-2
D
Spokeshaves
control
]
= ?
concave surfaces
D ;`\Z<;~\;
The standard smoothing plane is capable
of taking the finest shavings from the
most difficult woods. With the central
adjusting screw, the blade feed and
lateral position can be adjusted quickly
and precisely. The rear handle and frog
form a movable unit that defines the
mouth opening without requiring any readjustment of the cutting depth.
90
Blade width 50 mm
Blade thickness ^
Overall length
Weight
No. 703680
2_ 246.00
Repl. Blade No. 703681 &"^ 49.90
E ;`\ZZ~;Z\;Z
For fine shavings when working on flat
and long curved surfaces such as bows,
boats, slats, planks and edges. Because
they are guided by hand and are sensitive
to the wood structure, spokeshaves must
have hefty bodies and thick cutting
7$^%77
_"'^
_"'^
_
''
"&
95.00
95.00
26.50
105.00
35.00
Planes
Planes
We have developed our DICK plane
series based on our Herdim planes.
We have been making these planes
for centuries for our violin makers,
who require the utmost precision
and perfect workmanship. The
solid plane bodies made from
cast steel with precisely ground
soles aligned at right angles to
=
^
thick blades made from SK4-steel
$2`%
>
blade adjuster allows for precise
adjustments and the ergonomically
shaped handles developed through
tests as well as the polished cap
irons sit well in the hand. Handles
of native beech wood.
B
1
G u ar an t e e
Bevel Up Planes
7
>
Z
by changing bevel angle
Satisfaction
A
<~\;
Compact, solid block planes which,
thanks to polished cap irons, sit well in
the hand. The mouth opening can be
adjusted according to the application,
using the configurable shoe. Blade-depth
adjusting and cap iron fixation with easyto-adjust brass screw and knob.
G u ar an t e e
Lifetime sharpening.
Two free sharpenings.
Satisfaction
2
Block Plane, 20
For fine cuts and end grain. Bevel angle
`
Blade angle
Blade width ^
Blade thickness ^
Overall length &2
Weight 840 g
No. 703330
"'^ 59.30
Repl. Blade No. 703410 & 12.20
1
Block Plane, 12
For working with the grain. Bevel angle
`
^_
Blade angle &
Blade width ^
Blade thickness ^
Overall length &2
Weight 840 g
No. 703334
"'^ 59.30
Repl. Blade No. 703414 & 12.20
B
`\<<;<~\;
This plane is ideal for cutting rabbets or
trimming tenons to fit. It is an excellent
choice for end grain thanks to the low
7
&\7
^_]7#
adjustment mechanism, non-adjustable
mouth.
Blade width 44.5
Blade thickness ^
Overall length &2
Weight 800 g
No. 703335
_2 60.40
Repl. Blade No. 703415 & 12.20
G u ar an t e e
Satisfaction
C
[\|;\~\;
2
Because of its length, shape and acces
= 2
type of plane and was already very
popular in Stanleys time. Apart from finishing, its long design also makes it ideal for trueing surfaces. The blade, whose
cutting angle can be easily adjusted by
regrinding the bevel, handles even end
grain, knotty wood
and difficult grain
without problems.
Once assembled,
the supplied hot
dog (side handle),
the indentations
and the strong cap
iron with finger
recesses ensure
optimal ergonomic
planing.
<&\7
^_
G u ar an t e e
;
mouth via the front handle
Blade width 50 mm
Blade thickness ^&
Overall length ^
Weight 2_
Satisfaction
Bench Plane
No. 4, No. 5, No. 6, No. 7
G u ar an t e e
#
fortable grip even for large hands.
Lateral blade adjustment through
easy-to-reach lever.
D
Z3|~\;
The standard smoothing plane is capable
of taking the finest shavings from the
most difficult woods.
Blade width 51 mm
Blade thickness ^
Overall length
Weight
No. 703331
_'_ 92.90
Repl. Blade No. 703411 &2 17.40
91
Planes
Satisfaction
Bench Plane
No. 4, No. 5, No. 6, No. 7
G u ar an t e e
#
7
grip even for large hands. Lateral
blade adjustment through easy-to
A
\~\;
The increased length and weight compared to the No. 4 plane makes this one
ideal, not only for smoothing but also for
levelling surfaces.
Blade width 51 mm
Blade thickness ^
Overall length ^
Weight __
No. 703332
'2_ 102.90
Repl. Blade No. 703411 &2 17.40
B
]`;~\;2
Mid-size plane ideal for trueing and
joining of medium-sized boards.
Blade width 2
Blade thickness ^
Overall length 450 mm
Weight ^_^
No. 703333
&^_' 123.50
Repl. Blade No. 703413 &2 17.40
C
;`~\;_
Most popular size of jointer plane, ideal
for trueing and producing exact joints
and fittings.
Blade width 2
Blade thickness ^
Overall length 2
Weight 4000 g
No. 703338
&^^_ 159.90
Repl. Blade No. 703418 & 16.90
Available September 2012
G u ar an t e e
Plane guide
Difficult wood grains are often easier
to work using the plane at a slight
angle. However, the plane should be
used parallel to the workpiece for the
best surface quality. Difficult grains
and softwoods can be smoothed better
and with less effort if the surface is
moistened.
Pressure distribution
D
1
2
Satisfaction
Spokeshaves
control
]
= ?
concave surfaces
92
D
Z~;Z\;
This impressive new spokeshave in the
DICK series has a precise blade feed
^7==
when adjusted for fine shavings, gives
you a mouth opening of 0.5 - 0.8 mm.
This makes it an indispensible tool both
in bow making and for cutting round
bars and edges in cabinet making. The
compact plane body has comfortably
large handles for easy control of the tool.
For full-surface pressure without jammed
shavings, the underside of the cap is
taper-ground, which makes it easy to
G u ar an t e e
regrind if necessary.
Radius of round
version: 40 mm.
Blade width 50 mm
Blade thickness ^
Overall length '
Weight ^
Sole
Planes
Kunz Planes
Kunz is known for its solid planes
of wear-resistant grey cast iron with
fine-ground soles and good value
for money. The standard tool-steel
blades are hardened to approx.
2`]
?
hard woods, durable HSS blades
$
?2`%
7
accessories. Their epoxy-coated
green surfaces make the Kunz planes, made in Germany, unique.
Bevel Up Planes
B
B KUNZ~;~\;&
Z
_^&
but with tongue-shaped handle. No chip
breaker.
Blade width
Blade thickness
Overall length 85 mm
Weight &2
No. 703120
& 16.90
Repl.Blade No. 703130
^_' 4.50
HSS Blade No. 703155 &^ 14.70
E KUNZ~Z<;~\;
NO. 4, NO, 5
These planes, from the Kunz series
Kunz plus, impress with their precise
technology and use of top-quality
materials such as domestic cherry wood.
The blade is adjusted (lateral and depth)
by only one screw, a technique that was
first developed with the legendary Norris
planes. Kunz uses the cap-iron screw as
a connection for all adjustments. These
planes are very handy due to the low
front knob and the low construction. The
=^
nal space at the rear handle. Precisely
ground bodies made from annealed cast
C KUNZ~;~\;&&
Compact block plane, simple design.
^' 7
Blade width
Blade thickness
Overall length 85 mm
Weight &
No. 703154
&^'_ 16.50
Repl. Blade No. 703130
^_' 4.50
HSS Blade No. 703155 &^ 14.70
D KUNZ<Z;~\;_
For finishing rabbets, shoulders and
^'
breaker.
Blade width 2
Blade thickness
Overall length 100 mm
Weight
No. 703118
&^ 29.90
Repl. Blade No. 703138
"2 5.90
HSS Blade No. 703157 & 18.50
Scraping Planes
F KUNZ`\`~\;&&^
Replica of a Stanley
model from 1879.
The curvature of
the flexible steel
sole is adjustable,
allowing the plane
to be used for both
concave and convex surfaces. The double
blades lateral position can be adjusted
Z
without tear-out,
even on difficult
woods
#
edge burr
G KUNZ\<;Z`\~;`'
For smoothing heavily structured woods
and removing glue and paper remnants
from veneered surfaces. Includes 1.1
mm thick scraper blade.
<&&
Blade width 70 mm
Overall length _
Weight 2
No. 703121
'" 33.90
Repl. Blade No. 703131
"2 5.90
Toothed Bl. No. 703153 & 16.90
93
Planes
Spokeshaves
control
]
= ?
concave surfaces
B
1
A KUNZ Z~;Z\;[
];<\{;\{Z3;
For concave and convex surfaces,
such as chair seats, hand rails or round
7
$^
g) has an inside radius of 48 mm, the
?
$%
radius of 48 mm.
& 26.30
' 6.90
^^ 27.40
22 7.90
B KUNZ Z~;Z\;[
];<\{;\{Z3;
For fine shavings when working on
flat and long curved surfaces. The blade
depth can be precisely adjusted. Radius
$ &\`%^
Blade width
Blade thickness
Base
Stanley Planes
Proven compact planes, adjustable mouth opening, easy to adjust lateral
blade position, cutting depth. The blade is set bevel up (without a chip
breaker), which means that it is supported right up to the cutting edge,
resulting in excellent vibration control. Grey cast iron body.
C
1
Bevel Up Planes
7
>
Z
by changing bevel angle
C Z\;<~\;
"&=2&
Grey cast iron block plane with ground
sole and adjustable mouth opening. Cap
iron clamped with eccentric lever. Lateral
and depth adjustment. Japanese plane
blades (No. 718070) available as an
option.
Anant Planes
A major argument in favour of Anant planes is their cheap price.
Grey cast iron bodies and carbon-steel blades (58 HRC). Before use, the
blades must be sharpened and the chipbreakers adjusted. For precise
work the fit of the frog needs to be checked and if necessary the mouth
has to be adjusted. The AA series has thicker soles for better momentum, finely lapped soles and sides, as well as thicker plane blades and
chipbreakers. Handles of sheesham wood. Unless otherwise specified,
7
Bevel Up Planes
7
>
Z
by changing bevel angle
D ANANT\#~`~Z;`\<<;
~\;__
Removable head allows conversion to
a chisel plane. Mouth opening adjustable with shims, blade adjustment via
~
<`
Blade width "
Overall length &
Weight 2
No. 703177
'& 57.30
Repl. Blade No. 703178
__^ 9.20
94
E ANANT <;~\;Z
NO. AA4, NO. AA5
Universal plane with adjustable mouth
opening for major stock removal and
smoothing. Fine blade adjustment with
knurled screw, lateral adjustment with
side lever. The tools heavy weight makes
it easier to plane irregular grains or
difficult woods.
F ANANT|`|~\;
For cutting grooves,
tongues and rabbets.
Parallel and depth
fence, spur, nickelplated body. Supplied
"7$^#&2
mm) and carvers.
Blade width ^@&2
Blade thickness ^
Overall length
Weight 1500 g
No. 703181
&2^ 149.50
9 Replacement Blades
No. 703182
2_ 55.60
Planes
A 3\~\;Z;~\;
The worlds smallest Japanese plane with
hand-forged double-layer blade (cutting
edge of Blue Paper Steel) is not only a
real eye-catcher but also fully functional.
Ideal for cabinetmaking and model-buil-
B \~\;Z;Z3|
<~\;
Hand-made plane with cutting edge of
Blue Paper Steel that can be conveniently used with one hand. Japanese white
oak body.
Blade thickness 5 mm
Blade width
Overall length 150 mm
Weight ^^
No. 717013
2' 72.40
C Z3|~\;
]`<;|;`Z
Hand-made plane offering good value
for money. Cutting edge of White Paper
Steel. Block of Japanese white oak.
Blade thickness 2
Blade width 2
Overall length _
Weight 1070 g
No. 717006
22^" 79.00
D ~`;33\
Z3|~\;
Made in a Japanese master workshop.
The blade is made from White Paper
Steel and very rare iron (manufactured
before 1900) which through to its silica
particles evens and cleans the pores of
the waterstone. Distinguishable from
newer iron by the black spots. Japanese
wihte oak block.
Blade thickness 2
Blade width 2
Overall length "
Weight &
No. 717001
&2^^ 194.00
E \`{[{~\;
Z3|~\;
;? {3}
Ideal for working hardwoods. The steep
7$
%
reduces the danger of tear-outs when
working against the grain. The cutting
steel made of the highest-quality powder
ZZ$22` =
%
F INOMOTO
Z3|~\;
Made by Master Inomoto
using the finest white oak
and best steel. The blade is
made from Blue Paper Steel and
very rare iron (manufactured before
1900) which, thanks to its silica particles evens and cleans the pores of the waterstone. Distinguishable from other irons
by the black spots. Comes with a robust
cotton plane case and a test shaving.
Blade thickness 7 mm
Blade width 70 mm
Overall length "
Weight &^
No. 717023
2'_ 319.00
95
Planes
2
A Z3|~\;\;3
Resin-impregnated Japanese red oak
body, highly resistant to wear and warping. The chipbreaker is not adjustable.
1 Blade width 42 mm
Overall length 180 mm
Weight 475 g
No. 717074
^' 65.90
2 Blade width 50 mm
Overall length
Weight _2
No. 717018
2 66.90
3 Blade width 58 mm
Overall length
Weight 900 g
No. 717057
'_ 69.90
5 Replacement Blades
5 Replacement Blades
5 Replacement Blades
No. 717075
&" 15.40
No. 717019
&" 15.40
No. 717058
&" 15.40
B \3];`~\;=Z;[;{
]
77
7$#&2%breaker and the slightly angled blade
(pull-cutting) allow it to be used even
with difficult grain. Japanese white oak
body.
Blade thickness 5.5 mm
Blade width ^
Overall length
Weight ^
No. 717031
""&2 118.00
96
C Z`\~|~\;
Vertical blade. For trueing the
soles of Japanese planes, working very
hard woods and thin pieces. Plane across
or diagonal to the grain. Japanese white
oak body.
Blade thickness 2
Blade width
Overall length 155 mm
Weight ^"2
No. 717015
2&' 74.00
D 3~\ZZ~\;
The sole is curved along its length
and width, making it perfect for shaping
seat bottoms, bowls, stringed instrument
bodies etc. Japanese white oak body.
Blade thickness 7 mm
Blade width ^2
Overall length 155 mm
Weight ^
No. 717020
& 125.00
E \3];`~\;
With removable fence for
^=27Z
7 #
7=
?2` Z
chipbreaker, Japanese white oak body.
Blade thickness ^
Blade width
Overall length 150 mm
Weight "
No. 717033
^&& 36.90
Planes
A <~\;
Compact ebony body with square sides.
HSS blade with chip breaker, no wedge.
Blade width 44 mm
Blade thickness ^
Overall length 105 mm
Weight '
No. 702956
'"" 34.50
Repl. Blade No. 702957
'"" 10.70
B Z3|~\;=Z3\
;7 7
# ZZ
blade with chipbreaker.
Blade width 40 mm
Blade thickness ^
Overall length 175 mm
Weight
No. 702954
53.60
Repl. Blade No. 702955
'_ 10.20
C <;~\;
Ideal for working hardwoods and difficult
grain. HSS plane blade with wooden
= 7
<2
Blade width ^
Blade thickness ^
Overall length &
Weight 170 g
No. 702962
_2 24.70
Repl. Blade No. 702963
_& 8.50
E
D
1
E 3~\;Z
Rosewood plane body with polished brass
hardware. High-quality HSS blades.
D `\<<;~\;
Wave-shaped ebony body. HSS plane blade with wooden wedge, no chipbreaker.
Blade width
Blade thickness ^
Overall length 150 mm
Weight 190 g
No. 702964
2^ 31.30
Repl. Blade No. 702965
'_ 9.60
1 Block Plane
Curved body, with horn.
Blade width &^
Blade thickness
Overall length 80 mm
Weight 2
No. 702946
&"" 23.70
Repl. Blade No. 702976
& 6.20
F ;<3~\;Z=
#~;;Z; Price advantage
Well-suited for work with all hardwoods
in the making of musical instruments as
well as artistic carpentry and chair- and
model-making. With bodies of vibrant,
grained, Makassar ebony and polished
2 Edge Plane
For working rabbets into the corners.
Blade width &^
Blade thickness
Overall length 80 mm
Weight 40 g
No. 702947
&"" 23.70
Repl. Blade No. 702949
& 6.20
3 Scraping Plane
7'@"
Blade width &^
Blade thickness
Overall length 80 mm
Weight 2
No. 702948
&"" 23.70
Repl. Blade No. 702976
& 6.20
I
G
G Z~;Z\;=Z`\|Z\~;
ZZ7=
;7
body. Plain steel-plated sole.
Blade width ^
H Z~;Z\;Z=[|#Z\~;{
Carbon-steel blades,
with cranked tangs
that project through
the tools body.
Flat sole, Shun-Gee
body.
1 Blade width 42 mm
Overall length 150 mm
Weight
No. 702970
&^'_ 16.50
2 Blade width 67 mm
Overall length 190 mm
Weight 50 g
No. 702971
&2^ 18.60
I 3#<\{;{Z`\~|~\;
Chinese carpenters traditionally use
this scraping plane for bow-making or
precisely shaping both flat and curved
hardwood surfaces. The tools action is
similar to that
of a scraper
blade, yet
with the advantage that
there is no
wave effect
when working
even the most
97
Planes
B ;;~`3Z`;]`3
Z3|~\;
Classic smoothing plane. Shaving
thickness adjustable with a setscrew
free of backlash. Blade pre-tensioning,
adjustable mouth opening via a sliding
plate and lateral blade adjustment via
a rocker. The body and asymmetrical
handle (for right-handers) are made of
air-dried cherry wood.
Blade width 48 mm
Blade thickness ^
Overall length
Weight &
No. 703105
&"_ 185.60
Repl. Blade No. 703106 &&' 25.20
A ;;<~\;
Lightweight plane for assembly work
and making musical instruments. Large,
hemispherical-shaped adjusting screw
for setting the shaving thickness. White
beech body.
Blade width ^"
Blade thickness
Overall length 150 mm
Weight 450 g
No. 703101
' 69.30
Repl. Blade No. 703104 &2" 15.10
C ;;Z3|~\;
Traditional German smoothing plane with
integrated wedge support. The wedge can
easily be removed by hand. Domestic red
beech body, hornbeam sole with toothed
joint.
Blade width 48 mm
Blade thickness '
Overall length
Weight 1000 g
No. 703109
2' 72.40
Repl. Blade No. 703100 &_2 20.30
D ;;~`3Z{<;`\<<;
~\;
Ideal for making and finishing rabbets
and adjusting tenons and hand rails.
Backlash-free blade adjustment with
knurled screw. The mouth opening is
adjustable via the sliding plate held in
a grout and a wing nut. Durable white
beech body.
Blade width ^
Blade thickness ^
Overall length _
Weight 840 g
No. 703092
&^^&& 158.40
Repl. Blade No. 703093 &^ 25.50
E ;;{<;`\<<;~\;
Mouth opening adjustable via sliding
plate and wing nut. Hornbeam body and
sole.
Blade width ^
Blade thickness '
Overall length _
Weight 2
No. 703108
2&"^ 73.70
Rep. Blade No. 703110 &_& 18.70
F ;;`;`~\;
For making grooves, grouts and other
`77 ^#
7=7[
&=&=
Blade thickness '
Overall length
Weight 770 g
No. 703098
'' 96.20
98
No. 703099
G ULMIA{;\~\;
This Western style model has a solid plane body made of red beech with a white
beech sole, which is hard and wearresistant. The sole is inclined at an angle
_^
#
The metal fence allows for adjusting
the required depth. The inclination and
the pitch of the iron allow a skewed cut
and also easier sharpening because the
iron is formed like a normal plane iron.
The blade also guides the cutting forces
towards the inside to prevent surface tearing along the dovetail tip. This technical
solution is not considered by many other
suppliers and therefore fairly rare. A scoring spur which can be fitted as required
minimises the risk of surface tearing.
Blade width ^^
Blade thickness ^
H {;\;`
With this dovetail cutter for use with a
router, you can not only make joints more
quickly and precisely, but also a lot more
easily. The router cuts the grout into the
wood and the matching sliding dovetail
is added to the counterpart using our
{ ~
&_
_^
made of carbide metal and thus provides
a long service life even when used for
hardwood. Shaft diameter 8 mm, overall
2=
=
&_=?
&2
No. 707361
^__^ 44.90
^`<
_" 57.00
I ;{|;#`33|
~\;
For rounding or chamfering solid-wood edges,
multilayer board, corian
etc. The HSS double blades (pre-cut and
post-cut) allow clean cuts to be made
even when working difficult grain. Maple
body with brass fitting on the sole.
`^
Overall length 175 mm
Weight 155 g
No. 703095
&" 22.90
Repl. Blade No. 703097
"&2 10.90
Planes
A <[Z`\~|~\;
Special tool for precision-finishing
(tillering) traditional bows, also ideal for
making instruments, ribs, model making
or thinning leather straps. The spokeshave with a vertical blade facilitates
high-precision shaving removal even
with hardwoods and difficult grains. The
extremely small mouth opening (0.5 mm)
and chatter-free motion minimise the
B Z3\<;~\;
This compact smoothing plane is
patterned after models manufactured
by Austrian company Wei & Sohn. It
features a blade with a high-quality HSS
cutting edge and an asymmetrical horn.
Fine-grained, hardwood body.
<^2
<^
Overall length 190 mm
Weight 2'
No. 702968
2'& 31.90
Repl. Blade No. 702969 & 11.90
Hock Tools
Hock Tools from California specialises in producing plane and knife
blades from high-purity carbon
steel. The content of chromium and
vanadium additives is below 0.5
%, which allows the blade to be
ground to extreme sharpness and
makes it easier to restore the edge
than with conventional high-alloy
tool steels. As well as their initial
products - blades for their own
legendary Krenov-style wood planes
- Ron Hock and his staff have
made a name for themselves with
replacement blades for upgrading
old Stanley planes.
F HOCK<~\;
Simple kit for a block plane with jarrah
wedge. Once assembled, you can shape
the rectangular raw plane to your liking.
2#
blade made of high-purity carbon steel.
No. 702408
'22 57.90
D HOCK ~\;<\{;Z[
~<`;\;`
Solid 4.8 mm thick plane blades made
#
7 $2`%=#
cluding chipbreaker for building wooden
Krenov-style planes.
Blade width ^"
Overall length 90 mm
No. 702185
^^^ 39.90
Blade width 45 mm
Overall length 90 mm
No. 702187
^2'" 43.90
Blade width 51 mm
Overall length 90 mm
No. 702190
^' 45.50
E HOCK~\;<\{;Z
]`Z~;Z\;Z
`
7
\
excellent edge life for self-made spokeshaves. Thanks to cryogenic hardening
(extra low-temperature treatment at -185
%=7
grain, which means it can be ground to a
razor-sharp edge. Includes knurled brass
screws for precise adjustment of the
blade depth. Screw distance 100 mm.
Blade width 70 mm
Blade thickness ^^
No. 702192
_2 32.90
G
G HOCKZ{;`~\;
;# #72#
kit made of jarrah and red beech. Once
assembled, you can shape the rectangular raw plane to your liking. Includes 4.8
mm blade of high-purity carbon steel.
^'
No. 702407
_^^ 87.50
99
Planes
A ]`;Z`\~;`<\{;=
`;\|\`
Spring steel, approx. 50 HRC, excellent
blade durability.
Length x width 150 x 50 mm
Thickness
0.40 mm
2
0.80 mm
1 mm
No. 703507
No. 703502
No. 703504
No. 703505
No. 703506
&"^
&"^
&"^
&'
^
2.30
2.30
2.30
2.60
2.80
B ]`;Z`\~;`<\{;=
|Z;;
Length x width &^?_
Thickness
^&"
^&"
^'
3.80
3.80
3.90
C \~\;Z;Z`\~;`Z;;
The same highquality steel used for
Japanese saw blades
is available as a
semifinished product.
The sheets are ideal
for producing your
own high-quality scraper blades with a
long edge life, even when used with the
hardest woods. Hitachi steel SK5, basic
hardness approx. 54 HRC (can be cut
and filed).
Thickness 0.70 mm
Overall length 500 mm
Length x width
0.5 x 90 x 500 mm
No. 703523
0.7 x 70 x 500 mm
No. 703524
'^
9.90
_'
8.90
G
D Z`\~;`Z;Z=#~;;Z;
4-piece sets: rectangular 150 x 50 mm,
convex /concave 140 x 50 mm, rounded
&?_= &^?_
Thickness
E 3Z`\~;`Z;=_#~;;Z;
7-piece set of small scraper blades made
of Swedish steel.
Thickness 0.40 mm
Length x width _? ?&&
mm
No. 703500
&^ 29.90
F ;\;`\Z;
For protecting sharpened scraper and
plane blades from damage. Snap-down
flap, belt loop, 4 pockets.
Length x width &2?'
No. 703549
&'_ 17.70
G ;`\ZZ`\~;`{;`
Makes using straight scraper blades
easier and reduces the risk of cuts and
burns. The scraping blade is tensioned
on both sides, holding it particularly securely in place. The tension is
centrally adjusted with a screw. Strong,
fibreglass-reinforced plastic body with
brass fittings. Only suitable for 150 mm,
standard-length scrapers. Comes with a
super-hard, 0.75 mm thick scraper.
No. 703527
^^^ 39.90
J
H ;`\Z\`\<;<`Z;`
For safely
sharpening
the edges
of scraper
blades.
The blade
of the
scraper
is guided
along an
adjustable hardened-steel rod to accurately work its edge. Fibre-glass reinforced
plastic body, hardened-steel sharpening
=7
#&[
27
No. 703528
^&& 36.90
I HATTORI<`Z;`=&33
This scraper-burnisher made from
ZZ$2`%
raising a burr on scrapers. The surface
is finely polished for a smooth drawing
movement and thus an even burr. A solid
stainless steel ferrule joins the blade to
the varnished rosewood handle.
Overall length '
No. 703521
& 14.90
J KUNZ<`Z;`=`;;#Z\`;
Triangular cross-section for high bur
2
HRC. Beech handle.
Overall length
No. 703537
& 14.90
K
L ;`\Z;`;{|;`=
[];
Clamp for flat
files to facilitate
trueing of scrapers,
saw blades
(suitable file:
No. 704901)
and even ski edges.
"
\
140 mm, max. file thickness 5 mm.
No. 703526
&'_ 21.50
M KUNZ|;Z`\~;`
For removing dried, excess glue and
scraping away extra varnish. Designed for
heavy-duty use. Solid metal handle for
two-handed use. High-quality, double-
100
7$`2%
^&
Blade length 2
No. 703161
&& 25.00
Repl. Blade No. 703162
22 7.90
N
Z;``\;{Z`\~;`
]`<[3\;`Z
The serrated
scraper is used
to apply a
grooved joining
surface between
the horn layer
Satisfaction
G u ar an t e e
K Z`\~;`Z\`~;;`=
\`<
;
scraper blades and scrapertype turning tools, with two
differently shaped hardened
metal inserts made of durable carbides:
a rounded one for smoothing at normal
deformation pressure and a pointed one
for high deformation pressure and larger
burrs. Forged aluminium handle with
hand guard. Leather pouch and instructions included.
Overall length 150 mm
No. 703533
2_ 31.50
Indispensable!
Sharpening Systems | 112
101
Sharpening Devices
Bench Stones
King / Sun Tiger
Matsunaga is one of the largest manufacturers of sharpening stones in Japan. In the West, these stones are
usually known as King stones or Sun Tiger stones. The stones of the King or Sun Tiger series have a relatively
soft bond, which allows the abrasives to be continually exposed during use, making the stone highly effective.
These stones are particularly suitable for extremely hard, low-alloy carbon steels (White and Blue Paper Steel).
;?
77
=7
7 7
7>
Fore more King stones see
washed off, so the stone continues to be effective. Before use, soak the stones in water for at least 15 minutes. www.more-than-tools.de
They can also be stored in water permanently.
Sharpening Stones
Honing Stones
Combination Stones
B KINGZ\`~;|Z;=
GRIT 800
Aluminium oxide abrasive.
Dimensions _?22?^
No. 711001
&" 22.90
E KING|Z;=|`
Aluminium oxide abrasive.
Dimensions &?_^?
No. 711021
^^^ 39.90
H SUN |;`3<\Z;=
|`&
]
#
side green silicon carbide, 1000-grit side
aluminium oxide.
Dimensions &??
No. 711016
& 18.50
A SUN |;`,
\`Z;Z\~|Z;
Shaping stone with good sharpening qualities. Green silicon carbide abrasive.
Grit 220
Dimensions ?22?^
No. 711010
_2 32.90
Grit 240
Dimensions ?_?
No. 711000
^^^ 39.90
C KINGZ\`~;|Z;=
GRIT 1000
Aluminium oxide abrasive.
Dimensions _?22?^
No. 711011
' 23.90
D KINGZ\`~;|Z;=
|`&
Aluminium oxide abrasive.
Dimensions _?22?^
No. 711002
&" 22.90
F KING|Z;=|`2
Aluminium oxide abrasive.
Dimensions &'?2?&"
No. 711003
&_2 25.90
G KING|Z;|{=
GRIT 8000
Aluminium oxide abrasive.
Dimensions &'?2?&"
No. 711004
&" 48.90
WORTH KNOWING
this type of bond. The bond is softer and thus 19th century under the name aluminium
releases the abrasive particles more quickly.
oxide. The white aluminium oxide (sharpening stones are often coloured) is the purest
Grit
Ceramic bond
;
=7
The ceramic bond usually consists of glass
powder, which melts when the stone is
of meshes per square inch of a sieve.
2 Silicon carbide
(= 1/1000 mm).
Abrasive agent
Bond
1 Natural corundum
Natural corundum is the second-hardest
natural Japanese stones is best achieved with Synthetic manufacture already began in the
102
Sharpening Devices
Suehiro
Suehiro is a smaller Japanese company which has been producing
sharpening stones for three generations. The stones from the original
Suehiro series have a relatively soft
bond and are thus designed for
low-alloy carbon steels (Blue and
White Paper Steel). Before use,
soak the stones in water for at least
10 minutes.
It is not recommended to keep
them in water permanently.
A Z;`\`Z;Z\~|Z;=
GRIT 100
Very aggressive, hard silicon carbide
stone. Also suited for trueing other
stones.
Dimensions &??_
No. 710990
&&2' 13.90
B Z;`3<\Z;=
|`&^
Compact stone for sharpening and
honing.
White aluminium oxide abrasive.
Dimensions &^??2
No. 711533
&&2' 13.90
Cerax by Suehiro
Cerax is the best-known brand of the Suehiro company. The stones sold under this name have a medium-hard
bond and are particularly suitable for high-alloy tool steels but also for low-alloy carbon steels. The coarsegrained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly. The
stone with the base has extra stability and is easy to store. The included Nagura stone is used for cleaning and
unclogging the surface of the stone and for creating a fine polishing paste. Before use, soak the stones in water
for at least 10 minutes, but do not store them in water permanently. White aluminium oxide abrasive.
Sharpening Stones
Honing Stones
Combination Stones
;`\|`2
Dimensions 2?_^?^
with Base
No. 711554 2^ 54.30
without Base No. 711555 ^ 51.70
;`\|`^
Dimensions 2?_^?^
with Base
No. 711552 ^_2 44.70
without Base No. 711553 ^^" 40.40
;`\|`&2
For sharpening and finishing.
Dimensions &'^?2^?^
with Base
No. 711546 ^ 51.70
without Base No. 711547 ^ 38.70
F Z~;`Z;<NANIWA, HONING
Z;=|`'
Dimensions &?_?
No. 711023
2_& 79.90
G Z~;`Z;<NANIWA, HONING
Z;=|`&=
With plastic base.
Dimensions &?_?&
No. 711535
22 76.90
Naniwa
Naniwa is another large manufacturer of sharpening stones in Japan.
The orginal Naniwa stones have a
relatively hard bond. The stones
C ;`\|`&^
For sharpening. Without Nagura stone.
Dimensions &'^?2^?^
With base.
No. 711024
"' 35.20
E
D
D NANIWA3<\Z;=
|`&^
For sharpening and finishing.
Dimensions &_??
No. 711061
&'' 18.90
E NANIWAZ\`~;|Z;=|`
&=;`\\`|;
Ideal for large knives, wide plane blades,
drawknives and blades of all kind.
Dimensions ^^?&?_
No. 711320
^ 59.90
103
Sharpening Devices
Shapton
The premium range from Japanese company Shapton is the
glass-stone series. The sharpening
particles are highly pure and homogeneous. This is noticeable when
changing to finer grits: The traces
from the previous grit are quickly
ground out. A special bond allows
quick sharpening on a flat surface.
The sharpening stone has a base of
tempered glass
and is thus
100% warpfree. Conventional sharpening
stones may
warp microscopically by absorbing water,
but Shapton
stones solve
this problem
with their extremely flat base of
tempered glass.
Another advantage of the glass
base is that the grit rating on the
underside is always visible even
after much use. Before use, spray
the stones with water. It is not recommended to keep them in water
permanently. White aluminium
oxide abrasive.
Grinding feel
Grit 4000
hard bond
Grain purity
Hardness of the
abresive
Grinding feel
Grit 4000
soft bond
Hardness
of the bonding
agent
Susceptibility
to damage
Hardness of the
abresive
Grinding feel
Grit 220
Hardness
of the bonding
agent
Grain purity
Hardness
of the bonding
agent
Grain purity
Susceptibility
to damage
Hardness of the
abresive
Susceptibility
to damage
The two diagrams show the difference between a 4000-grit stone with a harder bond and a 4000-grit stone with a softer bond.
]
=
#
7 \
A SHAPTON=Z];`<{
These stones are particularly suitable for
extremely hard, low-alloy carbon steels
$[<~
Z%;?
#
ly hard steels soon blunt the abrasive
grains, but the soft bond allows the
blunted grains to be quickly washed off,
so the stone continues to be effective.
Dimensions &?_?&
C SHAPTONZ\`~;|Z;
{;`=[Z;
No. 711610
^ 59.90
Grit
4000
2
8000
No. 711605
No. 711606
No. 711607
'2 62.90
'_ 69.90
_^'_ 87.90
/3?
}2#
In blade sharpening tests there was
no noticeable difference in sharpness
7 &2
(mixed grit) and a standard sharpening procedure.
Grit
500
1000
^
4000
2
8000
10000
&2/
^
Grain
500
1000
4000
2
from 8000
Application
Flattening
Pre-sharpening
3
Fine sharpening
7
Finishing and polishing
Grit
=='
No. 711615
&=^='
No. 711622
&_2^" 209.90
' 239.00
F
G
104
F JINZOZ\`~;|Z;=
|`
This Japanese waterstone of aluminium
oxide has a hard bond and therefore does
not wear quickly. Before use, soak the
stone in water for approx. 10 minutes.
Do not keep it in water permanently.
Dimensions &?_?
No. 710991
2"_ 55.90
G Z;;\|Z;
NAGURA
Synthetic stone
for cleaning and
unclogging the
surface of the
sharpening stones
and for creating a
fine polishing paste.
Dimensions _?^?&"
No. 711302
^' 3.90
Sharpening Devices
Norton
US-based company Norton has
been developing industrial abrasives since 1885. With separate
production facilities for individual
'
=
Germany, France and Japan, the
company has become the world
leader in abrasives of all kinds.
A NORTON{\Z;Z
The Norton India series provides the full
range of oilstones for sharpening, plus
the natural Arkansas stone for honing.
The gentle, highly pure aluminium oxide
used for their manufacture is much finer
than the abrasives of other synthetic
oilstones. Additionally the stone is highly
effective and does not clog easily.
Pre-soaked with oil in the factory, it
comes ready for use.
C DUO SHARP3<\Z;Z
Diamond stone with two opposite plates
of different grains. The stress-free sandwich construction guarantees flatness.
;?
$77=
sharpening stones) and for sharpening
cutting edges of all kinds. DMT Non-skid
mat included.
D DUO-SHARP~ZZ;
Double-sided diamond sharpening tool,
incl. mount.
Grit fine / coarse
Dimensions ^?2_?"
No. 705372
"&2 109.00
G DIA SHARP<;Z;Z
Continuous surface diamond coating on
compact base plate. Ideal for pointed
tools or accurately trueing the backs of
tools. Rubber feet.
Grit fine
Dimensions &?&?2
No. 705380
'"" 34.50
Grit fine
Dimensions ^?_2?&
No. 705381
^_ 64.70
Grit coarse
Dimensions ^?_2?&
No. 705358
&' 61.70
B {\3{[;Z;3{;Z
For knives and tools. Plastic case,
slip-proof rubber base.
Dimensions &??&"
1
2
3
4
Grit
extra coarseNo.
coarse
No.
No.
?
No.
705365
705366
705367
705368
&"^
&"^
&"^
&"^
F NON-SKID MAT
Prevents sharpening stone slippage.
Dimensions &?
No. 705364
& 4.90
49.90
49.90
49.90
49.90
Extra-extra coarse
$ 2%
|
Coarse (blue)
$ %
| ^
Fine (red)
$ %
| 2
$ "%
|
&
=
$ "%
|
'
3
&=[ Magazine (USA) tested how quickly the different
abrasives (diamond, water and ceramic stones as well as sandpaper) remove stock.
\
=
#
$7%
7=
DMT was clearly the best of the quick sharpeners=
&
minutes to 4.19 minutes.
105
Sharpening Devices
Natural Japanese Stones
A blade and sharpening stone must be as perfect a match as bride and groom according to legendary blacksmith, Shigeoshi Iwasaki. Finding the ideal pairing is no easy task in either case. Despite the excellent performance of synthetic stones, many experienced sharpeners still prefer natural stones for sharpening their finest
blades. Japanese sharpening stones are particularly renowned for their ability to harmoniously sharpen handforged carbon-steels. They can bring a blades full potential to the fore and allow the sharpening process itself
to become a pleasant ritual. The finest stones from the Honyama quarries are becoming increasingly difficult
to acquire - we take great pleasure in still being able to offer these rare treasures. Natural Japanese stones may
only be used with water and must be kept protected from frost. Please note that the stones may have slight
natural imperfections and may vary somewhat in size.
A \~\;Z;\`\Z;\\
Medium-coarse grit lime sandstone,
very open texture, with good honing
properties.
C \~\;Z;\`\Z;
JYO-HAKU
Fine lime sandstone from the Kumamoto/
Sage region with a dense structure and
even grain for intermediate grinding.
Grit &@&
Dimensions 2?2?^
No. 711620
^&& 36.90
E \~\;Z;\`\Z;
SHO-HONYAMA
Very fine-grit stone cut from a thin
stratum of sedimentary rock at the ShoHonyama quarry. Unparalleled for honing
and polishing hand-forged chisels, plane
F
G
B \~\;Z;\`\Z;
BINSUI
Medium-grit lime sandstone for general
sharpening. Readily absorbs water, cuts
well and easily produces a fine slurry.
Grit '@&
Dimensions ?2?2
No. 711518
^^^ 39.90
D \~\;Z;\`\Z;
HONYAMA AO
Fine-grit, grey sedimentary stone from
the famous Honyama quarry. Very
uniform fine grit for fine sharpening
purposes. Synthetic base.
Grit &@
Dimensions &'?'?^'
No. 711517
^' 65.90
Rozsutec-Stones
G \`\;\|Z;
NAGURA
Stone for cleaning and unclogging the
surface of the sharpening stones and for
creating a fine polishing paste.
Dimensions ??^
No. 711301
& 11.90
F \``Z;Z\3\
Natural fragments, planed flat on one
side. From the point of view of sharpening properties comparable with good
Belgian bench stones.
Grit 2@'
Dimensions
&@&?_@"?&@
No. 711303
_2 32.90
J \`\Z\Z<;Z;=<\
Grit 2@'
Dimensions
&?'?
No. 705258
?'?
No. 705250
_ 89.90
"' 114.00
& 11.90
L
L <;|\[;Z;=
]`\|3;Z
Dimensions
^^@^"> No.
'@'> No.
M
K <;|\[;Z;=<
Grit 2@'
Dimensions
&??
No. 705556
?2?
No. 705555
M <;|\[;Z;=Z;`
Grit 2@'
"& 58.80
&" 229.00
Dimensions
_?^?
No. 705557
&_& 17.50
N <;<;|\[;Z;=<
Thicker and longer lasting than the
cream-coloured stones, but with equally
good honing properties.
Grit 2@'
Dimensions ?2?&^
No. 705570
_& 53.20
Sharpening Devices
Z\`~;|~Z]`3
;~`];ZZ\Z
Plane Blades The Lie-Nielsen Method
grit).
Step 3. Mirror Side
Re-Sharpening
To resharpen, you hone the secondary bevel
30
35
40
54 mm 40 mm 29,5 mm 21 mm
45
15 mm
Step 2. Bevel
David Charlesworth
7=
?= 7
<#`;33;{\Z
\Z3~;;Z`\;{|{;Z\`~;|
Thomas Lie-Nielsen:
Step-by-step instructions and abundant insider tips are provided for
sharpening all types of woodworking tools and knives. A discussion
on types of steel and a complete overview of all sharpening tools and
machines complete the most comprehensive and technically in-depth
book on sharpening currently available. &2~=
=
_
=
=?'.
_&^__
;~;`];;{|;
Ron Hock:
The perfect edge - the mystery of the virtually indefinable, perfect
[
?
=
the sharpening expert and tool maker Ron Hock has produced the
ultimate guide to sharpening. The book covers diverse sharpening
methods and will help you improve your own techniques. Contains
many tips and tricks for sharpening any kind of woodworking tools,
such as turning tools, chisel or plane blades, carving blades, hatchets,
saws, scrapers, drill bits as well as knives and scissors. ^~=
=
='?&2
_&^"2
107
Sharpening Devices
[Z\`~;
CARVING TOOLS?
Gouges
The Tormek provides (as an accessory) a profiled leather disc that makes polishing very
quick and easy.
V-Parting Tools
sharpening stones.
first.
WORKSHOP: Z\`~;|]
CUTTING TOOLS
sharpening.
Nose
Polishing
stone with the other from the inside outwards on leather. By sticking leather onto a shaped
piece of wood, you can
towards the cutting edge. Let the stone rest
on the inside surface and make straight mo-
vements.
108
Sharpening Devices
1
D
C
A
KING \Z~Z;Z
B
1
A KINGZ~Z;Z=Z3\
GRIT 1000
For sculptors tools and turning tools.
Dimensions 2&??
Grit
_&
"
22
5.60
6.30
7.90
B KINGZ~Z;Z=\`|;
For sculptors tools and turning tools.
Dimensions 100 x 50 x 10 mm
Grit
D KING 3]`3#Z;Z=
#~;;Z; Price advantage
For carving tools, consisting of:
=
'&
&2=&?2?&6 ?
=
^=
2??2
Grit
"_ 30.90
&^ 29.90
2'& 31.90
Suehiro
Suehiro is a smaller Japanese company which has been producing
sharpening stones for three generations. The stones from the original
Suehiro series have a relatively soft
bond and are thus designed for
low-alloy carbon steels (Blue and
White Paper Steel). Before use,
soak the stones in water for at least
10 minutes. It is not recommended
to keep them in water permanently.
White aluminium oxide abrasive.
E Z;`3]`3Z;Z
Ideal for sharpening and honing of all
types of cutting tools: outcannel and
incannel gouges, V-parting tools. The
back side of the stone can also be used
on chisels.
Dimensions "'?2?
E
1
Grit
monocrystalline
polycrystalline
F DIAFOLD#\#~`~Z;
Z\`~;;`
For sharpening outdoor knives, garden
equipment, axes, shears or hard-metal
machine tools. The foldable grip serves
both as a protective sleeve for the diamond plate and while in storage. Single
or double-sided coating.
Dimensions &&?^
F
1
Coarse (blue)
3
| ^
Fine (red)
| 2
| &
| '
Grit
Z;`3]`3Z;Z=
^#~;;Z; Price advantage
|
'$ _&&^2%=
&$
_&&^_%
^$ _&&^'%
in a set.
No. 711539
^2&^ 43.00
49.90
24.70
24.70
24.70
45.90
109
Sharpening Devices
A
B
A {\3{[;Z;3
Ideal for on the go:
In a leather sheath, excellent for quickly
sharpening router bits, small tools and
knives. Fine grit.
Dimensions &&&?^?
No. 705386
2& 26.90
B MINI-SHARP~;[;Z;
The sharpener for
on the go. Folding
case, key ring,
fine grit.
Dimensions _??
No. 705395
&&2' 13.90
C ;];
For gouges, profiled blades, turning tools,
tool making etc. Conical cross-section.
Grit fine
^^@"
File length 100 mm
No. 705392
&^ 29.90
D {\3{;
Conical diamond sharpener for sculptor
and turning tools. Fine grit.
"@&"^
Overall length &
No. 705393
"^^ 34.90
coarse No. 705423
"^^ 34.90
F ARKANSAS, MULTIFORM
Z~Z;Z=[;=#~;;Z;
Multiform Sliptone Set in a wooden
=#} _&&&@
_&&&'
No. 705260
&_2 25.90
G ARKANSAS MULTIFORM
Z~Z;Z=<\=#~;;Z;
Multiform Slipstone Set in a wooden
case, black. 4-piece set:
_&&&"@_&&&^
In a wooden case.
No. 705261
&^ 29.90
E \`\Z\Z=Z~Z;Z=
[;=#~;;Z;
Slipstone Set in a wooden case, white.
#} _&&&@_&&&
In a wooden case
No. 705267
22_ 72.20
Rozsutec Stones
H
H <;|\[;Z;=
\]#`{Z~Z;
Dimensions _?^@_
No. 705558
2'"
8.20
I <;|\[;Z;=3]`3
Z;
Dimensions 100 x 40 x 8 mm
No. 705571
&&" 13.20
J `Z;Z\`~;|Z;=
{`~#Z\~;{
Dimensions 80 x 55 x 18 mm
No. 705581
"&2 10.90
K HONING OIL
Light mineral oil for Arkansas and other
oil stones. Also suitable for lubrication
purposes.
Content 100 ml
No. 705263 "& 2.90
N
O
1
L SHAPTON `;|<
WITH DIAMOND COATING
For ultra precise trueing. Suitable for
all water and ceramic stones. Flatness
precision of +/- 0.005 mm. Designed for
grits 500 and above.
Dimensions ^?'?
No. 711613
" 249.00
110
M DMT {\#]\\~~|~\;
Trueing block with continuous surface
diamond coating on compact steel base
;?
7
coating technology. Together with the
large contact area and a flatness precision of +/- 0.01 mm, this feature enables
precise trueing of any kind of sharpening
|
&
=
?
&$?
#?
%
Dimensions ?&?&
No. 705429
&&&' 179.90
N `;|<
Hard ceramic blocks
for trueing Japanese
waterstones quickly and
accurately. The stones
are worked wet on the
block until plane. The use of silicon carbide powder speeds up the process.
Dimensions
1 &_??^
No. 711298
& 16.90
2 ?&?
No. 711299
^' 65.90
O `;||`;]`Z\`~;|
Z;Z
Finely woven, silicon
carbide-coated grille
for trueing uneven
sharpening stones.
The grille is placed on
a flat surface and the
watered whetstone is rubbed over it in a
circular motion.
Dimensions &?^
No. 711297
& 4.90
Sharpening Devices
A \#Z~<Z=#~;;Z;
Slip-resistant rubber base for sharpening
#
Dimensions "^?'_?&
No. 711102
"&2 10.90
B
D
C Z\`~;|Z;{;`
From stainless steel with anti-slip rubber
clamping jaws and medium support
bracket, in order to avoid breaking thin
stones.
Width 70 mm
Jaw opening
No. 711101
2& 26.90
B NON-SKID MAT
Prevents sharpening stone slippage.
Dimensions &?
No. 705364
& 4.90
D CARBCUT 1
For speedy re-sharpening of
knives (also serrated), axes
and scissors, ideal for on the
go. The V-form, wear-resistant
carbide element is also
suitable for deburring. Forged aluminium grip with hand protection. Includes
instructions and case.
Length 150 mm
No. 703534
2& 26.90
E TOKICO];Z\`~;;`
An uncomplicated knife sharpener that is
7
7 ;
;
=
allows even
inexperienced
users to quickly
and successfully sharpen all
types of cooking
knives. The blade
simply needs
7 ^@
both directions through the slits. Metal is
gently removed by two rotating and correctly angled stones. Suitable for single
and double-sided ground knives.
The Tokico is not suitable for damaged or
worn out blades.
Dimensions ??
No. 705373
23.80
Sharpening Sets
Sharpening Sets for Selective Application
;
needs to be sharpened
differently, depending on its design or
purpose. However,
opinions vary as to
the best method
and abrasives to
Price advantage
H <\ZZ\`~;|Z;
FOR ALL TOOLS
This set provides you with a combination
of sharpening stones for most tools (e.g.
chisels, plane blades, knives). It contains
Z
#
711010 for pre-sharpening, King 800
&#
_&&&_&&
=
F Z\`~;|Z;]`Z;Z
\{~\;<\{;Z]|#\
Z;;[;Z;`Z;Z\{
~\;Z
This set comprises a DMT trueing block
_^'
#
of blades with nicks or for trueing the
I Z\`~;|Z;]`;Z]
[#\\`<Z;;<;\{
[;~\~;`Z;;
For repairing nicks, this set contains a
#
_&&&&2#
#
7 _&&2
#
# _^2
G Z\`~;|Z;]`Z;Z
\{~\;<\{;Z][#\
Z;;\~\;Z;Z;Z\{
~\;Z
\
{3
7 _^'
is used for pre-grinding blades with nicks
{\ZZ`];\~\Z;`3;ZZ;`
A Japanese master blacksmith with a
legendary reputation
in Japan shows you
how to professionally
sharpen kitchen knives
on water stones. He
introduces different
types of whetstone,
shows the correct
J Z\`~;|Z;]`;Z]
|#\Z;;Z|#&=~3Z;;Z=
440 C, SKD 11
This set contains a Cerax 400-grit
shaping stone No. 711548 for repairing
?&2#
7 _&&2
#
111
Sharpening Devices
Sharpening Bestsellers as Sets
Price advantage
Price advantage
Price advantage
A 3<Z;=[\{{{
For sharpening and maintenance of
knives.
Set includes: Cerax combination stone
&2$ _&&2%6
DVD - Das Schrfen japanischer Messer
$ _&^'2%=|
6
Z _'
No. 711027
'^ 57.50
B 3<\Z;=
WITH DIA FOLD AND OIL
This collection of high-quality products
includes all the basic equipment for
sharpeing knives and tools. The included
sharpening primer (in German) gives instructions on how to proceed. Have fun.
Set includes:
Japanese combination stone King,
&2
_&&_6 #
_^26{3 Dia Fold
_^_6Z
_'6Z
No. 711029
&"^ 49.90
C 3<\Z\`~;|Z;=
[Z;{;`
For sharpening and finishing.
7
&2
No. 711005 stone holder No. 711101.
No. 711050
"2 53.50
Sharpening Systems
Tormek Sharpening System
Proven for many years and
constantly perfected wet-working
sharpening machines are the basis
of the ingenious Tormek-sharpening
system. A range of jigs, which can
be mounted on the universal support, makes the sharpening of any
cutting tool easier. Tormek enables
the achievement of exact cutting
geo-metry and consistent results
for chisels, turning tools, knives,
shears or machine tools. Also suitable for workshops and instructional
settings because of safe operation
@
an overload safety clutch.
The Tormek-Original ceramic
wheel assures short sharpening
times under all conditions in combination with the greatest possible
tool protection. The front end can
also be used for plane honing.
The leather honing wheel removes
burrs quickly and leaves a perfectly
polished cutting edge. Designed
for continuous operation (T-7) with
solid housing and sliding water
container.
Includes:
~
"$Z;_2%
\7
$%
Z
$Z~2%
\$[3%
$~\_%
7 $<&%
=${{#&%=
[
Z
No. 705191
_" 533.00
Replacement Wheel Tormek
$Z|#%
No. 705201
&&2'& 139.00
D `3; T-7
Tormek-Original sharpening stone,
=?6
&?^6
support, finely adjustable (can be used
horizontally or vertically). Powder coated
=[=
"`3=&2'
E `3;#^
Tormek-Original sharpening stone, grit
=?6
&?26
with fine adjustment (horizontal and
vertical settings). ABS plastic housing.
=&[=&`3=_^
<
;
(T-7)
magnetic dirt collector, overspill rim
and drip-off plate (T-7)
Includes:
~
"$Z;_2%
\$[3%
$~\_%
7 $<&%
=${{&%
No. 705185
_^&& 325.00
Replacement Wheel Tormek
$Z|#%
water on the case (T-7)
7-year guarantee (T-3)
10-year guarantee (T-7)
(if registered)
112
No. 705196
__^ 91.90
Tormek Accessories
Z7
@
2=&@&2=#^
T-7 unless otherwise noted.
Sharpening Devices
`3;];|
Model SVM-45
<2
Width 45 mm
No. 705203
_2 32.90
Model SVM-140
<&2
Width 140 mm
No. 705214
^' 45.50
B `3; ZZZ`Z|Z#&
Also suitable for hedge shears.
No. 705205
^" 40.80
C `3; ~\;`;`|
Z#^
For blades of any length, minimum blade
&^
No. 705207
&^&& 155.90
D `3;`;ZZ{#&&
For turning tools (scrapers, scorps,
inshaves) chisels, scraper blades etc.
Torlock locking system.
No. 705218
_" 29.50
E `3;||;|Z{#&'
For turning and firmer gouges, as well as
=
mm wide. Adjustable in width, cutting
angle and shape.
No. 705247
2& 73.90
F `3;`|Z;;`
TTS-100
For adjusting angle bevels of turning
gouges and chisels, independent of
wheel diameter. Used in combination
with jigs (SVD 185) and (SVS 50).
No. 705237
&2_ 19.90
H `3;\;|Z\#&_
For axe heads up to 170 mm in size
(larger axes can be sharpened without a
jig using the universal support).
No. 705228
&&2' 13.90
I `3;~`];{;\;`
|[;;\#&
For honing and polishing the inside of
gouges and V-shaped tools, interchangeable wheels.
No. 705227
^"^^ 46.80
K `3;Z;|`\{;`Z~#2
For regrading and dressing Tormek sharpening stones.
No. 705209
&_"' 21.40
L `3;[{`;`Z
TNT-708
Gouge jig, multi-jig ,
tool rest, leather honing
wheel, turning tool setter, machine dust cover
and instructions box for
turners.
No. 705454
&&_2 252.00
M
G `3;~`;Z"|Z;#_2
For plane blades and chisels. Also suita7
=
^=
T7 and old series models, (included with
#_#^%
No. 705236
&"^ 49.90
M `3; HAND
TOOL KIT HTK-705
Short jig, axe jig, knife
jig, long knives jig, scissors jig.
No. 705455
&&'' 137.90
Sharpening-workshops
Learn the professional use of the
Tormek machine. If you buy a
Tormek T-7 you may take part in a
special course Sharpening with
Tormek free of charge.
Further information on the internet at www.more-than-tools.de/
workshop
N `3;`\|<\Z;
;7
to easily rotate
the machine
&'
it with complete stability. It
makes it easy
to alternate between
sharpening/
honing or sharpening towards or away
113
Sharpening Devices
B `3;{`<Z\`~;|
\\3;{<Z#
Sharpening the complex tip geometry of
a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener
attachment, you can now sharpen a
4-facet drill bit with the usual wet-grinding method on your drill for maximum
precision and service life. The optimum
point and clearance angles can be set
for any drilling operation with regard
to the size of the drill and the material
7
;
completely blunt and have
their tips broken off can
be returned to the perfect
shape through sharpening.
~ "@&
^@
No. 705231
&2_^ 199.00
D {Z;`]``3; SHAR~;|ZZ;33#^'
Linen, to protect from wood dust.
No. 705215
& 16.90
C `3;\{Z\<;`;|
TOOL TT-50
With diamond tip, for trueing ingrained
or unround grinding wheels.
No. 705210
2 66.90
E
E `3; HONING COMPOUND PA-70
]
_&
and 705197.
70 g.
No. 705213 &^_&&
'_ 9.60
F `3;`|\`;~\;3;
[;;=|`
This hard-bond stone is suitable for
#
#
7
chromium-vanadium steel and HSS.
No. 705196
__^ 91.90
I
\~\;Z;Z\~|
[;;=|`'
;?
#
7
repairing damaged tool blades. Primarily
7
#
7
7
steel.
No. 716030
& 119.00
L
\~\;Z;Z\`~;|
[;;=|`'=]``3;
Fast and effective with soft bond, for
#
7=
7 #\
for grinding chromium-vanadium steel,
for example Pfeil sculptors gouges.
No. 716060
& 169.00
Sharpening-workshops
Learn the professional use of
the Tormek machine. If you buy
a Tormek T-7 you may take part
in a special course Sharpening
with Tormek free of charge.
Further information on the internet at www.more-than-tools.de/
workshops
O
G
\~\;Z;Z\`~;|
[;;=|`&
Suitable for HSS as well as carbon-steel
#
7
effective polishing with little abrasion.
No. 716040
& 119.00
H `3;|[;;Z#=
GRIT 4000
;?
surfaces, thanks to hard bond. Particularly recommended for chromium-vanadium
7
ZZ7#
steel.
No. 705458
&&&' 168.00
114
J `3;`|\`;~\;3;
[;;Z|#=|`
This hard-bond stone is suitable for
#
#
7
chromium-vanadium steel and HSS.
No. 705201
&&2'& 139.00
K `3;Z\`~;|[;;
<\Z;ZZ<#=
|`
Ideal for exceptionally hard materials
such as HSS, but also carbon-steel. The
hardness, shape and size of the abrasive
make it highly effective.
No. 705456
&&&' 168.00
M
\~\;Z;|[;;=
GRIT 4000
This stone has a softer bond and is highly
effective. Suitable for HSS steel as well
#
#7
7
No. 716061
&" 229.00
N `3;|[;;Z#=
GRIT 4000
;?
surfaces, thanks to hard bond. Particularly recommended for chromium-vanadium
7
ZZ7#
steel.
No. 705457
&'^ 219.00
O `3;<;|`{;`3|Z;<|3#&
Though primarily designed for turners,
this mounting set, in combination with
the Gouge Jig (SVD-185), the Multi Jig
(SVS-50) and the Tool Rest (SVD-110),
allows you to use all turning tools with
the Tormek system also on a doublewheeled bench grinder. This makes the
rough pre-sharpening of hard steels
much
easier.
Using the
turningtool
setter,
you can
transfer
the same
blade geometries to the Tormek machine
for honing. Comes with Tormek universal
support with fine adjustment, horizontal
support rest, adjustable platform made
Sharpening Devices
A
A SHINKOZ\`~;|ZZ;3=
Z;
The Shinko grinder enables the achievement of professional sharpening
results. Clogging rarely occurs with the
open-pored Japanese waterstones. Water
cooling and plane-honing produces
long-lasting and strong edges. Because
no heat is generated, the blade can be
held very close to its edge and guided
very accurately. No sparks are produced,
allowing the device to be safely operated
in workshops and instructional settings.
The stone surrounding foam ring is easily
pressed down when sharpening long
blades.
Sharpening wheel:
Japanese waterstone, grit 1000, 180
?_==
mount, wheel nut, splashguard.
Motor:
=&[=2=`3
gear-driven.
Casing:
Plastic, tool rest adjustable in height and
angle. Water container with valve, drain
tube.
Overall weight approx. 5.5 kg.
No. 716020
^^2 242.00
A SHINKOZ\`~;|ZZ;3Z;=
^Z;Z Price advantage
Shinko Sharpening System:
Z=^
$
'=
&2%
No. 716024
&2 299.00
D `;Z;{<;#[;;;{
|`{;`_Z
Unlike all other conventional doublewheeled grinders, the 7500 TS is
specially designed to suit the needs of
tool sharpening. The speed range of
1400-1700 rpm greatly reduces the risk
of the steel getting too hot. Most conventional double grinders run at speeds of
^
= =
differ from those of cheaper models. The
abrasive used is aluminum oxide (white),
which is especially suitable for high-
^&" 275.00
E Z\`~;|Z;]``|
TOOLS Price advantage
This set gives you all you need for
sharpening turning tools. The lowspeed Creusen double-wheeled grinder
_&2
complements the Wolverine sharpening
system which consists of basic set No.
_&_
|
_&_&
C `;Z;\33{;|`{|[;;Z=150 MM
Width 40 mm. Shaft diameter 15 mm
Grit
100
2
No. 716026
No. 716027
^^^ 39.90
^^^ 39.90
1
D [;`;
{\3{`;`
This device can
be mounted in
the Wolverine
holder of the
basic set and
is used for trueing and dressing the grinding wheels of
double-wheeled
grinders.
A fine-adjustment knob
positions the diamond in relation to the
wheel and moves it alternately from left
to right under slight pressure on the
support arm.
No. 702173
2'" 67.70
F [;`;Z\`~;|ZZ;3
The Oneway sharpening system was
specially designed for woodturning tools
but, with its two different jigs, is also
suitable for chisels and plane blades as
well as other tools. The arm is fitted to a
double-wheeled grinder using a base system (fits all common models). Platform
&2?_2
1 Basic Set
Thanks to the wide flat rest with adjustable angle, this system is suitable for
scrapers and parting tools as well as chisels and planers. Includes a left and right
base with eccentric locking mechanism,
arm and flat rest.
No. 702170
_"2 89.20
2 Vari Grind
This jig, which can be rotated in any
direction is designed for sharpening
turning and profile gouges. The angle can
be accurately adjusted using the hole
matrix. Notches on the back indicate the
set angle. Max. Intake 19 mm.
No. 702171
53.00
115
Sharpening Devices
Kelton Sharpening System
C ;Z{|\`3=Z`
Short sliding arm for use with the Kelton
Tool Rest for sharpening chisels or plane
blades or for sharpening gouges with the
3#|
^
No. 702165
&2 18.40
With its robust design, functional details and choice of components, the Kelton sharpening system is ideal
for sharpening turning tools, chisels, plane blades and other tools. The arms are fitted to a double-wheeled
grinder using a jig (fits all common models). Surface bronzed.
;Z{|\`3=|
Long sliding arm for use with the V-Post
for sharpening large gouges, or with all
other accessories such as the Tool-Rest
3#|
2"
No. 702166
&_^& 20.60
B
B ;|{;<
This guide block is mounted either on
the left or right of the double-wheeled
grinder and fixes the sliding arms securely in any position.
No. 702168
& 17.30
A
E ;`;Z
With its large rest,
this adjustable platform is ideal for sharpening scrapers and
parting tools as well
as chisels and plane
blades. The platform
angle can
be precisely adjusted with an adjustment
\
and wide grinding wheels allows grinding
close to the grinding stone.
No. 702167
2'& 81.10
D ;#~Z
V-shaped support for
pivoting the Multi-Grind
freely on the sliding arm
D
or turning long gouges
directly with the end of
the handle in the V-post.
No. 702164
&&' 14.10
E ;3|`{
Combined with a sliding arm and a Vpost, this robust sharpening jig is ideal
for sharpening roughing and fluting
=
means the jig can be set for almost any
sharpening angle. Comes with plastic
plates for gentle tool clamping.
No. 702163
^ 51.70
;Z\`~;|ZZ;3<\Z
Z;&
Basic set for chisels and plane blades.
Set includes guide block, short sliding
arm and tool rest.
No. 702174
"'& 116.80
;Z\`~;|ZZ;3<\Z
Z;
Basic equipment for sharpening turning
gouges. Set includes guide block, long
sliding arm, V-post and Multi-Grind.
No. 702175
'_^ 103.80
Sharpening Accessories
F
J
L
F ~\{{;Z`~Z
These strops can be used with or without
paste to polish tool blades. The solid,
non-slit beech base prevents cutting
edges from being rounded off. If necessary, you can use finishing paste on the
black (rougher) side; the fine brown side
is usually used for stropping without paste. Can be held by the handle or screwed
to a worktop through the two holes.
Dimensions 415 x 75 x 18 mm
No. 709162
^^^ 39.30
G
H \~\;Z;~Z|~[{;`
KONGOSA
For polishing knife
blades, tool mirror
surfaces and removing
oxide layers. Used with
addition of water.
Grit 1000
Content 50 g
No. 716363 &^'&
' 6.90
J <`Z;`
Milled steel plate for lapping the backs
of chisels and plane blades. Needs to be
screwed to a wooden base. The blade is
worked with the help of a piece of wood
applied with pressure. Used with silicon
carbide powder and water.
Dimensions ?2?_
No. 713600
&^ 29.90
I
G Z\`<{;~[{;`
Use this powder to true up and polish
the back of chisels blades and blades of
planes. Put a small amount of powder
mixed with a drop of water onto an even
steel plate. Now grind the iron until
you get an even surface and consistent
microsection.
Content 150 g
Grit
50
No. 713603 ^_&
180
No. 713604 ^_&
116
&
4.90
&
4.90
I \~\;Z;~Z|~[{;`
SUITA
Made from natural sharpening stones,
this finishing powder should be applied
after initial polishing with Kongosa.
Grit 8000
Content 50 g
No. 716364 &_'&
_' 8.90
K ];<]]|[;;
;?
=
#
rounding off of sharpened edges.
150 mm
Width
Shaft diameter
No. 705490
" 24.90
L ];<]]|[;;=
3;{[];=Z`\|
Smoother felt, takes more polishing
paste, enables more intense abrasion.
150 mm. Width
Shaft diameter
No. 705493
& 14.90
M <]]|[;;=ZZ\
Approx. 70 layers of especially evenly
woven sisal, double sown, for fine
polishing.
150 mm
Width
Shaft diameter
No. 705496
&^^2 15.90
N
N Z~`]`];[;;
For chucks, with wheels, nut and adapter
'
No. 705491
_' 8.90
Sharpening Devices
E `Z`;3;`
E
;
#
formula:
;
=
which are completely
A DMT{\3{~Z|~\Z;=
covered with rust, it
^#~;;Z;
For mirror-finish polishing of knives, cut- may not be too late for
7~@^
them. This Rust Remover
diamond paste on a metal, glass or hard- is the solution to this
problem. Simply mix the
wood surface and then polish applying
<
2 non-acidic formulation
micron and continue the polishing with a with water and submerge
^
&
your rusty tools. It wont attack plastics,
Z ^
rubbers and wood. The formula is
biodegradable, 500 milliliters make up
2$%=^&$%
No. 705400 &=&&& &2_ 19.90 a solution of ten liters for rust remover.
After the initial rust has been removed,
the tools are protected from further
corrosion.
Content 500 ml
No. 705487 2"'&
"^^ 34.90
H ANTI-CORROSION COATING
This anti rust coating,
which complies with
H
military standards, gives
superb protection from
corrosion to all metals.
Once applied, the nonyellowing film protects
for up to two years.
Shake well before use
and apply with brush,
cloth or spray. Can be wiped off easily.
Content &
No. 705486 && & 12.50
Before
derusting
C ~Z|~\Z;Z
These wax-like polishing pastes are
applied to felt buffing wheels and smooth
_2
^'
^'
^'
3.90
3.90
3.90
After
derusting
F `Z`;3;`=|;
Are you tired of using
rusty tools? With this
F
gel-like rust remover
you can remove rust
easily and quickly. Apply
the undiluted gel on the
surface with a kitchen
sponge and simply rub
off the rust. Can also be
used for large surfaces.
This gel does not stain
wood and most synthetic
substances. Bio-degradable.
Content
No. 705488 "&2& &" 22.90
B
B |{;#PUTZ~Z\{[;|~\Z;
Proven cleaning and polishing agent for
all shiny metals (steel, stainless steel,
aluminium, brass, copper, silver, gold,
nickel, chromium etc.). Ideal for honing
blades on leather, e.g. Tormek sharpening
system, strops, etc. Non-toxic, acid and
formaldehyde-free.
Content 100 ml
No. 705262 "& "2 5.90
I {Z`;`Z\`;;~
For use in industry, crafts, household and
hobbies. Its multiple effect eliminates
annoying creaking, lubricates mechanical
parts, removes and protects against rust,
releases stuck parts, creeps under water
and displaces it, penetrates all pores
and cracks. Also effective in extreme
temperatures. Free of silicone, fully synthetic and no gumming. Sprayable in all
situations, empties up to 99%. Without
gas propellant. No shaking required.
Content ^"
No. 705521 ^&&
&^ 12.30
H Z;ZZ \3;\
Versatile, light oil from the seeds of the
camellia tree:
Corrosion protection:
Camellia oil is acid-free, not volatile and
not susceptible to resinification, making
it the ideal oil to protect tools from rust.
Made from pure natural plant products
and food safe, it is especially suited for
the preservation of kitchen knives made
of carbon-steel.
Wood protection:
When applied to wooden surfaces, it is
absorbed quickly due to its low viscosity.
Once absorbed, it helps protect the wood
from damage by moisture, dirt and UV light.
Clear, not discolouring, it accentuates the
woods natural beauty. Non-hardening
Body care:
Camellia oil makes an excellent base for
the preparation of lotions, creams and
soaps for cosmetic use. As a massage
oil or hair oil, it has for ages been found
irreplaceable by Japanese geishas.
100 ml
No. 705280 2& ^'_ 4.60
1
No. 705281 ^& 2^ 7.50
2 1000 ml
No. 705282 &2'&
&& 16.80
1
D BALLISTOL USTANOL LIGHT
;|;;`|
High-quality, effective oil for cleaning,
maintaining and lubricating tools and
all types of machines. Creeps easily and
loosens even stuck screws and joints.
^_
5.20
G BALLISTOLZ\|\`\|;
This liquid universal oil ensures reliable
protection from rust even under the most
extreme conditions such as damp and
salty air.
^
4.80
J BALLISTOL
Ballistol provides reliable rust protection,
cleans and oils metals, impregnates and
preserves leather and wood surfaces, and
is even suitable for the disinfection of
minor cuts. In the garden it can be used
to treat tree cancer and to combat aphids
$^
%<
based on pure medical white oil, spiked
with natural plant products. It is thus
ecologically-friendly and bio-degradable.
1
No. 705445 &
_' 8.90
2 500 ml
No. 705440 '&
&&' 14.10
L \~\;Z;\3;\
The unalloyed carbon-steel which
mosthigh-quality blades are made of
is not corrosion-free. To protect them
from rust, occasionally apply a thin coat
of light, acid-free, non-evaporating oil.
This extremely light oil is extracted from
the leaves of the camellia tree. Just a
thin coat will reliably protect a steel
blade from corrosion. Camellia oil is not
susceptible to resinification and may also
be used for cleaning, sharpening and
lubrication purposes. Not suitable for
direct contact with food and kitchen knives. For that purpose we recommend the
$ _'%
1 100 ml
No. 713800 2&
6.00
2
No. 713801 ^&
2^ 7.50
M
M BALLISTOLZ~`\<;=;3~
No. 705441
' 6.90
117
Sharpening Devices
B `Z;`\Z;`
These rubberised abrasive blocks provide
an effective means of
removing surface rust
from valuable knives
without damaging the
blades. Using water as
a lubricant, the rust is
Grit
''
''
''
7.00
7.00
7.00
Honing Guides
For clamping and precise-angle sharpening of chisels and planes on
bench stones.
D ;`\ZZ\`~;|ZZ;3
Clamp the blade in the guide and set the
desired bevel angle using the angle jig.
The sharpening is done on a plane bench
stone. The wide roller assures stability
and preserves the surface of the stone.
The tappet screw allows honing to a
second (micro-) bevel without having to
reclamp the blade. Set, honing guide and
angle jig.
F ;`Z\||{;
The wide roller preserves the surface of
the stone and prevents tilting. Can be
used as an angle jig with grinding machines which have a tool rest. Aluminium
body with brass roller.
Max. blade width 2
Max. blade thickness 10 mm
No. 707149
&^^2 15.90
I {<;\[||{;
The blade is centrally held in one of the
two grooves in the vise-like aluminium
`
2
Width '
Max. blade thickness 7 mm
No. 711400
& 16.90
J <;;|\|;]`
;{|;Z
For checking bevel angles.
Brass coated.
&$&@&%
2
No. 707261
^'_
4.60
K
Honing guide
Angle jig
G Z\;||{;Z;
With plastic rollers and a folding angle
gauge, indluding sharpening stone and oil.
Grit &
K DMTZ\`~;|ZZ;3=];
;`\#];
Ideal sharpness for everyone:
Sharpening knives and tools can be so
@Z
System from DMT. The easy transportable Diafold Magna-Guide Sharpening
System features an Aligner Blade Guide
(ABG) which provides 7-angle adjustabi
@
big outdoor knives to fine kitchen knives.
It works in conjunction with the Magnetic
Angle Guide (MAG) to keep the blade at
the ideal angle for sharpening. The deep
clamp design securely holds blades up to
9.5 millimeters in thickness while sharpening, without scratching the blade.
E ;`\ZZ\`~;|ZZ;3
A high-precision guide for precise and
consistent perpendicular sharpening of
all straight-edged blades. Also suitable
for short, irregular and tapered Japanese
blades. Aluminium body, easy-gliding
brass roller. Quickly adjustable gauge
with grip. Instructions included.
?&^=[2@_
=<&@=
&@
Width 2@_
No. 703666
"' 59.00
118
H |;`Z\`~;|{;;
For keeping the correct angle when sharpening knives manually. Simply put on
7
7@
=
position the incorporated ceramic fence
on the honing stone surface. That way
the bevel angle is held fast and warping
HAMMERS
NAILS
PRY BARS
Powerful and bounce-free!
Mallets | 124
Accessories | 125
119
Japanese Hammers
The simple outward appearance of the
Japanese hammer (Genno) conceals its
inner sophistication. The hammer head is
soft in the middle and hardened only at the
ends. This allows the full force of a blow to
be transferred while simultaneously dampening vibrations and reducing the hammers
bounce. One face of the hammer is flat
while the other is ground with a slight crown,
making it especially useful for driving nails
flush with a surface and for marquetry work.
The Gennos high efficiency means you can
generally select a lighter weight in compa
;
hammers. Replacement handles are available
upon request.
B |;=\33;`;{
This archaiclooking genno is
forged by hand
in one of the
last big hammer
blacksmiths
in Japan. After forge-welding, the soft
basic body is given a kind of hammered
look. Heating the soft steel to varying
$#^%
=
;
is engraved with the name of the master
blacksmith. The handle is pre-mounted
and must be wedged into the head by
the user according to Japanese tradition.
Instructions included.
120
2
1 Square Hammer
Universal hammer type for assembly work
and driving nails and Japanese chisels.
Head weight ^_
Overall length ^2
No. 714121
'^" 99.90
2 Daruma-style Hammer
This Daruma-style hammer is mainly
used for driving Japanese chisels. The
round, compact head allows accurate,
powerful strokes.
Head weight ^_
Overall length ^2
No. 714122
'^" 99.90
A {\3\ZZZ;;\33;`
A triumph of Japanese blacksmithing:
This attractive Damascus steel hammer
proves that a highly sophisticated
implement can
be produced
oldest tool, despite its archaic
appearance. The
polished layers
of Yellow Paper
Steel and the
softer centre
##
er damascus
steel produce
a delightful
colour-contrast. Handle made of ebony.
the head.
Head weight ^_
Overall length ^2
No. 705692
__^ 509.00
C
C Z\`;\33;`=3\]Z
Hand-forged
genno from a
well-known
hammer blacksmiths in Japan,
whose shape embodies the simple elegance of Japanese
style. The distinction between the forgewelded, matt basic body and the hardened, highly-polished striking surfaces
gives an insight into its manufacture and
7 ;
head is engraved with the name of the
master blacksmith. The handle is premounted and must be wedged into the
head by the user according to Japanese
tradition. Instructions included.
Head weight ^_
Overall length ^2
No. 714123
2^^ 75.00
Hammering Tips
When driving a nail into a piece of
wood, friction causes an incredible
amount of heat to be produced. This
heat destroys the woods fibers and
tends to loosen the nails ultimate grip
on the wood. It is therefore best to
use the shortest, thinest appropriate
nail. Tap it in up to the neck with the
flat face of the Genno using soft blows
and then seat it with one sharp tap
of the
curved
face. For
hardwood
we recommend
pre-drilling the wood or to snip off the
points of the nails. The snipped of
points of the nails allows them to cut
the fibers when entering the wood.
D
D `;\|\`;\{;{\33;`=
;|`\;{
An attractive tool
and a beautiful
gift:
Those who are
fond of attention
to detail will certainly appreciate Master
Satos hand-engraved Genno. To highlight
the mythological animal motifs engraved
on both sides of the hammer head, the
surface is copper-patinated.
Head weight ^_
Overall length ^
No. 714203
22^" 79.00
Overall length
115 g
^_
570 g
750 g
^
^^
^^
^_
^_
B 3|;
;# #
panese chisels and carving tools. Round
head with large striking area makes
mishits unlikely.
Head weight ^_
Overall length
No. 714011
" 24.90
C \|\;\{\33;`
Octagonal-headed hammer with flat cheeks, ideal for adjusting and fitting work. The cheeks can also be used as striking
surfaces.
Head weight
A |;HATTORI
Japanese-style hammer for driving chisels and nails. Round head with one flat
and one rounded striking face, selectively
hardened.
Head weight ^_
Overall length ^
No. 700975
&' 12.90
No. 714001
No. 714002
No. 714003
No. 714004
No. 714005
&"
"
"
^&&
^'_
22.90
24.90
28.90
36.90
45.90
D Z\`;\33;`
All-purpose hammer with particularly good directional stability,
7
=
\^_|
suitable for striking Japanese chisels. Square-headed, rounded
edges.
Head weight
Overall length
115 g
^_
570 g
750 g
^
^^
^^
^_
^_
No. 714101
No. 714102
No. 714103
No. 714104
No. 714105
&"
&^
&^
^&'
^__^
22.90
25.50
29.90
37.90
44.90
121
A \`~;;`Z\33;`
Puristic, well-balanced carpenters
hammer with slightly bell-shaped head
and round cross-section. The flanks are
bronzed, the faces are finely ground.
Head weight ^_
Overall length ^^
No. 714010
&" 22.90
B ]\;|;
The bell-shaped head increases directional stability during use and the tapered
end allows high-precision work to be performed. Drop-forged head, copper-plated,
with a slightly crowned face.
Overall length ^2
Head weight
&^ 29.90
'_ 33.40
C \~\;Z;\`~;;`Z\33;`
This is the perfect tool for driving nails.
The conical head stays true, does not
bounce and the sharp nail claw is exceptionally efficient at removing nails.
The faces and cheeks are designed to
make it possible to work in tight spaces.
;?
Head weight 400 g
Overall length ^"
No. 714120
&"" 23.70
D |Z3;
This all-round tool is found in many Japanese tool boxes. As well as its primary
function as a mini-hammer for tiny nails
and working in inaccessible spots, the
handle is also used as a punch for
countersinking nail heads. The surface is
hand-decorated with a forged look.
Overall length 155 mm
No. 714130
_"' 9.50
E 3\33;`Z=2#~;;Z;
For craftsmanship:
The mini hammers from Japanese master
blacksmiths are ideal for delicate work.
Thanks to their drop-shaped handles,
they are well-balanced and lie superbly
in the hand. The forged heads made of
G <\Z3|\33;`Z
From a Japanese master workshop:
The archaic appearance of the Japanese
blacksmith hammer reveals little about
its inner qualities. In relation to its
weight, the strongly asymmetrical face,
which tapers from a square cross-section
to the round strike surface, provides for
high impact force as well as rebound-free
and fatigue-free working. Partially hardened and delicately balanced, it supports
the impact rhythm during forging work.
Replacement shafts are available.
Overall length ^
^^
F \~\;Z;\33;`
Maximum efficiency:
Practically effortless hammering with a
high driving force and perfect balance.
The heads are forged by hand, and the
harmoniously proportioned head and the
ergonomic handle yields a wonderfully
organic tool which you simply will not
want to put down. The asymmetrical
construction allows maximal directional
stability during use.
Overall length&
^&
Head weight
Head weight
122
Western Hammers
Picard
Picard hammers have been manufactured in Germany for over 150 years.
With innovation and experience, the company develops products of
exeptional quality.
A PICARD`]|\33;`2"'
The classic carpenters tool:
Unbreakable, oval steel tube handle with
a vibration dampening, non-slip elastomer grip. The head features a differentially hardened point and claw, checkered
face and magnetic nail slots which can
also accommodate small nails.
Head weight 2
Overall length ^&
No. 705685
^_" 41.40
B PICARD`]|\33;`_"
The head and neck are forged from one
piece and bonded seamlessly to the leather grip, making this Picard hammer almost indestructible. The handle is made
of disk-stacked leather and screwed to
the full-length tang through a head plate.
If necessary, it can be tightened using
the screw at the butt end. Thanks to the
untreated leather, the handle absorbs
damp and adjusts to the individual shape
D PICARD[\``|\33;`
All-purpose hammer
with classic head
shape for assembly
and inlay work. The
fin is rounded, the
face slightly convex
in order to prevent
indentations. Ash
handle.
Overall length^
^
Head diameter
Head weight
Head weight
"&2 34.70
^2_ 43.40
180 g
^
No. 705682
No. 705683
&^'_ 16.50
&2 19.70
Estwing
The head, neck and leather handle of this hammer are joined seamlessly to make a practically indestructible
striking tool. The full-length tangs and heads are forged from one piece. The heads are differentially hardened
and, together with the neck, fully polished.The handle is made of disk-stacked varnished leather and riveted at
the end.
E ;Z[|Z3Z\33;`
@
#
king, as well as assembly and fitting
work, driving nails into wood, and much
more.
Head weight ^
Overall length ^
No. 705695
&"^ 49.90
F ;Z[| \3;`\#Z;\[
\33;`
With their round, smooth, bell-shaped
head with slightly curved face and the
curved nail claw, claw hammers are ideal
for driving in and loosening nails while
protecting the surface.
Head weight 2
Overall length ^&
No. 705698
^^2 63.50
G ;Z[|\#~`~Z;\;
Robust axe, ideal for carpentry tasks.
Thin blade with hammer head and nail
claw. Can be suspended from a belt
using the leather blade protector.
Blade length 90 mm
Head weight 2
Overall length ^
No. 705691
2"22 82.90
I ;Z[|`]|\33;`
The point can be driven into the wood,
and so is used for moving beams and
keeping the hammer on the roof. With
magnetic nail claw and smooth face.
Head weight 2
Overall length ^^
No. 705699
^' 65.90
J
J \Z|\33;`
Chasing hammer with a large, slightly
convex face for driving gravers and small
punches as well as a ball-peen side
for creating a hammered look. Chasing
refers to the decorative texturing of metal
surfaces. Ash handle.
'&
Head weight 110 g
Overall length _
No. 705333
&" 23.20
123
Soft-Face Hammers
and Rawhide
Hammers
A [;`<<;`\33;`
To stop marks being left. The advantage
which these hammers (with heads made
of white rubber) have over their black
counterparts is that they do not leave
unattractive marks on light coloured
surfaces. Slightly convex head, solid red
beech shaft in conical socket.
Head diameter
2&
Overall length ^
^
Total weight
^_
2_
No. 705679
No. 705680
B WIHAZ]]\;3\;
This hammer is used for assembly work
and fitting parts together. The yellow face
is medium hard and made of colourfast
and wear-resistant polyurethane. It is
suited for assembly and fitting work.
Soft materials can be hammered without
leaving pitting using the blue face, which
is made of soft, colourfast and wearresistant elastomer. The durable housing
is made from malleable cast iron. A comfortable to hold hickory handle completes
this great product.
Head diameter ^
Overall length"
^
C `\[{;\33;`[;\{`;
American buffalo hide
coiled around a lead core
dampens the blow and
simultaneously protects
the surfaces of sensitive
pieces from damage.
Ideal for furniture assembly, interior, restoration,
parquetry and tiling work. The rawhide
heads are highly resistant to wear and
can also be used for striking chisels and
carving tools. Hickory handles.
Head diameter^
45 mm
Overall length^
"
Total weight
Total weight
&
&'
17.20
21.90
2
450 g
No. 714327
No. 714328
2^" 31.40
^__ 39.00
& 14.90
&_& 18.70
D `\[{;\33;`
This rawhide hammer
is a specialized tool
for the purpose of
splitting wooden
shingles together with
a splitting knife. The
head of the hammer
is made of the skin of
water buffalos, which
is rolled and compressed thrice. Then
the hammer head has to rest for months.
It is very tough and shock-absorbing.
As the head is made of rawhide it has a
large diameter and is very effective while
at the same time being lightweight.
The handle is made of lacquered ash.
Head diameter 90 mm
Overall length ^2
Total weight &
No. 705681
_ 89.90
Veneer Hammers
Hammer veneering is a proven
technique for making and restoring veneers. The pre-steamed
and ironed veneer is pressed down
using the warmed veneer hammer.
Working from the middle of the piece outwards, the hammer is moved
back and forth across the piece to
force out bubbles and excess glue.
The rounded face distributes pressure efficiently and evenly.
Mallets
Satisfaction
F
Z\`;3\;Z
These mallets are ideal for both
assembly work and driving chisels.
The hard, single-piece head of domestic
white beech has a trapezoid shape for
precise, ergonomic strokes. All edges
are slightly bevelled to prevent damage
to the workpiece. The smoked robinia
handle has a double curve to fit the shape of the hand perfectly and is securely
wedged to the head.
G u ar an t e e
1 Head width 65 mm
Overall length ^
Total weight ^
No. 730044
' 24.80
124
2 Head width 75 mm
Overall length ^_
Total weight 2
No. 730045
__ 27.10
G u ar an t e e
Mortised Handle
The most secure
way of attaching
a handle is with a
through mortise. The
head sits securely
between the turned
collar on the handle
and the wedge at the top end.
Accessories
A
A \~\;Z;~`;Z[{;\Z
For decorative corner, T or L joints which are exposed to high mechanical loads, conical wooden nails are the first choice. After pre-drilling with an appropriate conical
drill, the nails are applied with a gentle hammer strike and a little glue. Also ideal
for restoring furniture, music instruments, historical fitted features or to fill small
imperfections. Made of beech wood.
B \~;`;{{`<
For drilling holes for conical wooden nails
and screws. Made of HSS. Hexagonal
shaft.
Cutting length 85 mm
Overall length &^'
Length
Quantity
^&'
^&'
_
_
2^
2^
^
^
45 mm
45 mm
2
2
88 mm
88 mm
^
^
&
180 pieces
2
90 pieces
Forged Nails
Because of their square shafts (larger
surface area than conventional round
nails) and coarse surfaces, forged nails
are more difficult to pull out than the
conventiontal round nails commonly used
today. Their shafts are tapered, resulting
in an equal distribution of pressure along
the length of the nail, which also makes
it harder to pull out and lowers the risk of
splitting the wood. The nails are primarily
used in carpentry, boat building and
restoration.
No. 717528
No. 717524
No. 717529
No. 717525
No. 717530
No. 717526
No. 717531
No. 717527
__
^^^
__
^^^
__
^^^
__
^^^
3.30
39.90
3.30
39.90
3.30
39.90
3.30
39.90
^
4.7 mm
5 mm
2
No. 717520
No. 717521
No. 717522
No. 717523
'^ 9.90
"&2 10.90
& 11.90
& 14.90
Length Quantity
5 mm 400 No.
8 mm ^ No.
Shaft
50 mm
2
70 mm
^&
^
^
No. 830123
No. 830124
No. 830125
&^
2
_^&
6.10
7.40
8.70
E DOOR NAIL
Large four-faceted head, slender shaft, also suitable for decorative purposes. Colddrawn, blued steel. 1 pack = approx. 100 pieces.
Length
Shaft
^
40 mm
'
No. 830113
No. 830114
^_'
"2
D PLANK NAIL
Large four-faceted head, thick shaft, for larger dimensions. Cold-drawn, blued steel.
1 pack = approx. 100 pieces.
Length
C Z\;`\Z
Manufactured using traditional methods:
These decorative
copper nails are
beaten in the USA
on original machines dating from the
19th century. They
are used to rivet the
frames of shaker jars,
for delicate craftsmanship work, model
construction, leather
applications or for ornamental purposes.
F <`\ZZ`;Z
For the widest variety of materials, in
particular for the assembly of knife grip
plates, for joining thin components made
of wood, metal, plastic, leather or for
decorative purposes. If necessary, these
can be cropped, and the heads can be
rounded off. They are driven with a hammer (if necessary, with dimpling punch).
1 pack = 50 capsules and 50 bolts.
4.50
5.90
* maximum thickness of the materials
which are to be joined together
Shaft 4 mm
Head Thickness*
2 11mm No. 830150 2'&
2 15mm No. 830151 __^
8.5mm No. 830152 &
G <\Z3Z\
This easy-to-transport anvil, cut from
a railway track, is suitable for small
blacksmithing works. Face milled flat
and chamfered on two sides.
Dimensions &?&?&&
Weight ^
]&?2
No. 706566
&"^ 49.90
8.10
9.20
12.20
H \~\;Z;{`;`Z;=#~;;Z;
To drive nails, pins, splints etc. Chromeplated surface, octagonal shaft.
4-part set.
H
Working length 50 mm
Overall length 150 mm
^2
No. 710797
"&2 10.90
Wrecking Bars
I
I [`;|<\`Z
Reliable wrecking bar made of fully
hardened spring steel and therefore
particularly light. The wide, precisionground pry tips at both ends allow the
bar to be easily wedged without damaging the surface of the piece.
10-year warranty.
125
A
A \~;`
For cabinet making and carpentry.
Double-sided claw.
Overall length ^2
Max. nail shaft diameter 2
Weight 2"
No. 714314
2& 26.90
B [`;|<\`
For heavy-duty use.
Pry bar (without slit).
Overall length 450 mm
Max. nail shaft diameter 2
Shovel ^
Weight 850 g
No. 714308
&^ 29.90
C \~;`=Z\;ZZZ;;
Made from stainless steel suited for outdoor use. Slightly smaller forged claw on
long side for easier insert of the nailhead.
Partially polished.
Overall length ^2
Max. nail shaft diameter 2
Weight 2
No. 714342
64.90
D \~;`=[{;\[
The precision-ground claw is wide and
thin, allowing pieces to be gently eased
apart without damaging their surfaces.
D
1
126
Woodturning
Tools
Chucks | 138
127
Woodturning Tools
WOODTURNING \\{`\]]|#Z\{|`\{;[;`~`;;{
BASICALLY, THERE ARE TWO DISTINCT
METHODS OF TURNING WOOD
Hook tools
Scrapers
Z
7
Ring tool
Hollowers
Most hollowers are cranked and thus suitable
SPINDLE TURNING
openings.
and hollowers.
Roughing-out gouges
FACEPLATE TURNING
bulk material.
Sharpening pass
Two free sharpenings (see page 5).
surface quality.
Sharpening service
Workshops
Woodturning Intensive Course,
Chisels
beginning.
Spindle Turning
Faceplate Turning
Parting tools
Bowl gouge
128
Woodturning Tools
Crown-Turning Tools
Standard
Turning Tools
The tools forged by the Sheffield-based Crown Works are excellently designed and expertly crafted. The blades
=?
73ZZ
designed rosewood handles with heavy-duty brass ferrules.
We extend a 5-year warranty to all our crown turning tools!
Crown-PRO-PM-Tools
The ultimate turning tools: PROPM gouges are the top of the line
for exotic hardwoods, laminates
or wood with mineral inclusions.
The very high percentage of cobalt
(8%) and tungsten (10.5%) make
them highly durable. The tools hold
their edge at least five times longer
than HSS tools. All PRO-PM tools
come fitted with dark stained ash
handles.
Ready-to-use bevel by DICTUM: Engl. spindle gouges, bowl gouges and roughing out gouges are specially
ground by us and are therefore ready to use.
Spindle Gouges
Chisels
CROWNZ;[Z;Z
Standard tools for smoothing both flat
and curved surfaces. Skew edged,
double-bevelled blades.
CROWN ;|ZZ~{;||;
Flat-milled from round material,
fingernail-grind.
Blade width
Overall length
2
9 mm
&
400 mm
400 mm
400 mm
No. 701905
No. 701906
No. 701907
&" 25.10
^&& 27.50
'' 34.30
No. 701908
^^' 42.10
Blade width
Overall length
&^
19 mm
^'
^'
^'
No. 701914
No. 701915
No. 701916
22 31.70
^2_ 36.50
^'22 46.00
No. 701977
2&^ 54.90
Forged Gouge
Blade width
Overall length
400 mm
PRO-PM
Blade width
Overall length
19 mm
485 mm
PRO-PM
Blade width
Overall length
10 mm
&
495 mm
495 mm
No. 701972
No. 701973
^_2 44.70
&"^ 49.90
CROWN;`~;\#Z;Z~{;
||;
The standard gouges for spindle work.
The die-forged flutes run the entire
length of the blades. Finger-shaped bevels.
Blade width
Overall length
7 mm
9 mm
&
18 mm
^&
^'
^'
^'
^'
^'
No. 701936
No. 701937
No. 701938
No. 701939
No. 701940
No. 701941
^2_
^'"
^"&
2&^
2^'_
_^'_
43.70
45.80
46.90
54.90
76.00
87.90
CROWN\Z;[Z;Z
For spindle turning and facework.
Specially designed to reduce friction
between the blade and tool rest to allow
them to be easier to guide than chisels
made of rectangular stock. Skew edged, double-bevelled.
Blade width
Overall length
19 mm
^'
^'
No. 701917
No. 701918
CROWN`{;{Z;[Z;[
`{;{;`
The rounded support edge facilitates finer
movements and prevents the cutting edge
from becoming embedded.
Blade width
Overall length
19 mm
^'
No. 701987
Bowl Gouges
Parting Tools
CROWN;\#{<[||;
Primarily for large-scale facework.
Made of round stock with milled,
deep flutes. Fingernail-grind.
Overall length
Blade width
Overall length
9 mm
&^
&2
2&
2&
2&
^
2
^2
^'
No. 701909
No. 701910
No. 701911
^&_2 37.80
^'_ 45.90
2"_ 55.90
Overall length
22
No. 701926
No. 701927
^"" 47.50
'^ 33.70
' 33.80
CROWN];{~\`|
Single bevelled, German-style.
Superflute
Blade width
^&2 37.20
^22 43.60
Blade width
Overall length
No. 701912
_'"" 94.00
2
400 mm
No. 701975
No. 701976
_2 67.90
_^^ 86.90
No. 701929
^2 43.50
PRO-PM
Blade width
Overall length
&^
&2
22
22
Blade width
Overall length
5 mm
400 mm
No. 701928
^2^ 43.20
CROWN;Z[`||;Z
Designed by Master Woodturner David
;
=
7
are for rough and finish shaping of the
inside and outside of hollow forms. Special elliptical grind.
Blade width
Overall length
&2
2"
No. 701961
_2_ 91.00
No. 701955
& 124.00
PRO-PM
Blade width
Overall length
&2
22
CROWN~\`|=];#Z\~;{
Thin, very rigid blade for making fine grooves and parting
^
Blade width
Overall length
&2
&
No. 701965
" 28.90
CROWN`||||;
For removing large amounts of stock
during preliminary rounding. Die-forged,
deep fluted blades with straight bevels.
Blade width
Overall length
^
^
^'
^
No. 701901
No. 701902
_2 48.50
^ 59.90
No. 701954
_"'^ 95.00
PRO-PM
Blade width
Overall length
^
485 mm
129
Woodturning Tools
Scrapers
CROWN3#~Z`\~;`
Versatile tools for finishing the inner and
[^
exchangeable, taper-ground HSS cutters:
round, pear-shaped and square.
Blade width
CROWNZ;Z`\~;`
Also suitable for finishing undercuts.
Blade width
Overall length
500 mm
No. 701986
^ 50.40
Overall length
_
^'
Replacement Cutter
Round
Pear-Shaped
Square
No. 701943
22^ 78.90
No. 701945
No. 701946
No. 701944
&2&^ 19.20
&_2 20.90
&2_ 19.60
CROWNZ{;|Z`\~;`=
ROUND
For finishing the bottoms and inner
surfaces of hollow forms and for
undercutting.
Blade width
Overall length
19 mm
^'
No. 701930
CROWN{;\Z`\~;`
For cutting the recess to accommodate
the jaws of a dovetail chuck.
Blade width
Overall length
&^
^
No. 701985
"^^ 34.90
CROWN<[]Z|Z`\~;`=
ROUND
Heavy-duty scraper for finishing the
inside of large hollow forms.
^&& 37.50
Blade width
Overall length
550 mm
No. 701960
^" 64.20
Spindle Gouges
Overall length
2
10 mm
&^
^^
400 mm
400 mm
No. 702031
No. 702029
No. 702030
" 24.90
_" 33.20
^'' 46.20
Overall length
_
^2
50 mm
2
580 mm
580 mm
No. 702019
No. 702021
No. 702020
" 65.80
2 78.00
"' 114.00
;`TAYLORZ~;`];<[
||;=Z{;|
The original Superflute gouge designed
by Roy Child is one of the most popular
bowl gouges in the world. The slightly open
profile allows the creation of smooth outside
surfaces. Straight bevel.
Overall length
9.5 mm
&^
&2
^
^
2
2
No. 702027
No. 702025
No. 702026
No. 702028
&"^
^
''&
&_2
Blade width
Overall length
9.5 mm
&^
&2
^
^
2
No. 702023
No. 702022
No. 702024
47.90
"' 59.00
2 78.00
Blade width
Overall length
&2
2
No. 702014
"_2 108.00
Chisels
;`TAYLORZ;=`{<\`
Due to its round profile, this tool allows
the blade to move freely along the tool
rest for making profile cuts.
Bowl Gouges
Blade width
;`TAYLOR
;Z[`#<[||;
A bowl gouge designed by top master turner
{;
7
7
finishing and rough cuts on either the inside or
outside of the vessel. Special elliptical bevel.
;`TAYLOR`||||;Z
For removing large amounts of stock in the
initial shaping of rough stock into round.
Die-forged, deep fluted blades with
straight bevels.
Blade width
;`TAYLOR
<[||;=Z{;|
Primarily for working inside bowls.
The bevel is drawn back to reduce the risk
of the cutting edge digging into the workpiece.
Fingernail bevel.
;`TAYLOR{;;~]|||;
For cutting deep profiles along the grain
(chamfers, curves, grooves).
Blade width
A ;`\ZZ`\~;`<`Z;`
This scraper burnisher
is used to roll a
smooth-edged scraping
hook on HSS scrapers.
Many experienced
turners use a slight
hook on the cutting
edge of their scrapers
to improve the cutting
action. Of course in principle you can use
the burr created during sharpening, but
this is brittle and uneven. This version
allows you to press the scraper against
the burnishing rod on the screwed-on
base using the cylinder rod for leverage.
You can choose different settings for the
radius by changing the position of the
burnishing rods and you can choose an
_@_
_@'7
angles. Dimensions &&_?2
No. 703515
^__^ 44.90
49.90
62.30
104.90
119.90
Blade width
Overall length
&^
580 mm
No. 702018
29.80
;`TAYLOR\Z;[Z;
For fine cutting along the grain. Less
friction on the tool rest, easier control
and turning than with a square profile.
Skew-ground double bevel.
Blade width
Overall length
&
No. 702016
No. 702015
^&_ 35.90
^^" 40.40
Parting Tools
;`TAYLOR PARTING TOOL,
DIAMOND
Taper-ground profile for reduced friction
on the sides. Double bevel.
130
Blade width
Overall length
5.5 mm
No. 702017
^^2 63.50
Woodturning Tools
^^^ 39.90
D {\3{Z\`~;;`
To sharpen the inside of hooks and ring
tools, clamp the sharpener in a power
drill or cordless screwdriver and guide
it along the cutting edge. The conical,
slightly rounded head makes it easy to
apply. 2
Overall length 2"
No. 707399
'^ 9.90
E
E DMT DIA-SHARP3;
High-quality mini-hones with ergonomically shaped handles for easy sharpening
of pruning shears, machine blades and
router cutters. The compact design is
ideal for tight spaces.
Grit fine
Dimensions 180 x 18 mm
No. 705390
_' 8.90
|`{`Z{`;Z;
Keith Rowley:
;
wood, you should
not have to learn
from your mistakes.
This is precisely the
purpose of this clearly
formulated and easy to
understand standard
work. Richly illustrated, it teaches the
fundamental craft and technical skills
and introduces the various projects.
&'~=
=_
2
=&_?'
In German.
No. 713359
_" 29.90
Hollowing Tools
F
2
G
Set includes:
Handle, probe with
collet, Heart Scraper,
;Z
=
replacement probe.
Blade width ^
Overall length 440 mm
No. 702049
52.90
`~
7=~Z
No. 702059
&_& 17.50
1 Straight
2
Blade width
131
Woodturning Tools
A CROWN\;`
To create decorative
wave patterns on
end-grain Woodturning
parts (bowls, jewellery,
jar lids, etc). The
thin tongue oscillates
upon contact with
the rotating part, and
this generates regular
chatter marks. Incl.
changeable straight
and rounded tongues.
Instruction manual.
Blade width 10 mm
Overall length ^
No. 701154
2&^ 54.90
Replacement Lip
Straight No. 701155 22 7.90
Rounded No. 701156 22 7.90
B CROWN`;\{\Z;`Z;
For cutting internal and external threads,
e.g. for making threaded boxes. Hardened
tool steel, rosewood
handles. Instructions
included. Hint: Try
out first only practise
leads to success!
;
one inside and one
outside thread chaser.
Gradient =
toothing/inch.
Overall length
^
Pitch
2&_2 73.50
22& 74.50
C CROWN;Z;<\Z;
Challenge for professional turners:
Special set of tools for turning up to 5
nested ball according to
the model of the Chine72#
consists of a bead forming
tool, tool mount and four
ball-cutting knives.
Instruction brochure
included. For frequent use
we recommend fitting each
of the ball-cutting knives
with its own tool mount.
2#
Overall length ^
No. 701981
&&2' 144.80
Replacement Tool Mount
No. 701982
^&' 37.90
D ;Z;<\
A piece of woodturning wizardry in its
finished form. Three nested balls made
of cedro wood.
;?
2
No. 831012
_2 32.90
1
E
2
F
E CROWN<;\{]`3|
For cutting accurate
beads and
pre-shaping rings.
Ring diameter
2
10 mm
^'
Blade width
"_ 30.90
2'" 32.00
F CROWN\~;`|
For producing loose
rings and rings that
are captured by the
workpiece, doublebevelled blades.
`
2
&
^'
I ;`TAYLOR
;`Z]`;`|
Blade width
'" 33.90
^ 36.00
1 Cylinder Cutter
Nr. 702040
=2
6,50
2 Bud Cutter
Nr. 702039
=2
6,50
3 Ball Cutter
Nr. 702042
=2
6,50
H ;`TAYLOR {;`\|;]
;`|
This easy-to-use texturing and decorating tool is ideal for decorating turned
boxes, bowls, pens and other objects.
Cuts wood, bone, antler and synthetic
materials and can be used on concave,
flat and convex surfaces. The cutters can
be changed quickly and easily thanks to
132
K ;`TAYLOR];~
This triangular point
tool is used for turning
ultra-fine V grooves,
allowing you to isolate
or interrupt textures created with the
texturing tool. For both spindle and
faceplate work.
Handle length 175 mm.
Overall length _
No. 702038
& 17.90
Woodturning Tools
Combination Tools
C
A
I
A CROWN`;
For specialised use in cutting along and
across the grain. The fully depth-adjustable Super Ring enables this tool to be
used securely in extremely undercut hollow forms such as vases and other deep
vessels, even when it is difficult to see.
The tool is also suitable for discontinuous
cuts and burl wood. The depth of the cut
can be set individually. Thanks
to the modular
articulated design,
the tool can be
optimally adjusted
to the workpiece. In addition to the pleasantly soft,
foam-cushioned main grip, a small brass
side handle gives added control. The set
also contains five different cutters for
finishing surfaces. All cutters are made
of cryogenically hardened HSS steel.
B CROWN|Z{;\{;
Long side handle for added leverage,
control and balance of the tool.
Overall length
No. 702063
&^ 29.90
F CROWN;\`Z`\~;`
Compatible with the Crown Cryo Turning
Tool or Crown Revolution. Cryogenically
hardened HSS steel.
Blade width 19 mm
No. 702066
&&& 13.70
C CROWN]\;;`
Compatible with the Crown Cryo Turning
Tool or Crown Revolution. Cryogenically
hardened HSS steel.
Blade width 9 mm
No. 702069
&^' 15.80
G CROWN;|\;`\;
SCRAPING TIP
For smooth finishing of both inside
and outside surfaces of a workpiece.
The negative rake setting prevents the
blade from catching in the workpiece.
Compatible with the Crown Cryo Turning
Tool or Crown Revolution. Cryogenically
hardened HSS steel.
Blade width '
No. 702061
"^^ 34.90
Set includes:
Main handle
Side handle
Articulated shaft and fully depthadjustable
Super Ring
Replacement ring tip
Collet
Key Cutter
Fat Key Cutter
Heart Scraper
;Z
Z
^
Handle length 455 mm
No. 702060
&2^'_ 195.00
D CROWN;;`
Compatible with the Crown Cryo Turning
Tool or Crown Revolution. Cryogenically
hardened HSS steel.
Blade width 5 mm
No. 702068
&&" 13.20
E CROWN;||Z`\~;`
Compatible with the Crown Cryo Turning
Tool or Crown Revolution. Cryogenically
hardened HSS steel.
Blade width &^
No. 702067
&&" 13.20
Kelton
The company Kelton from New Zealand (home of high-quality turning
tools) is the most innovative company on the market for turning tools.
Many different famous turners and carvers have some influence on these
products and thus keep on improving the tools. Since using high-quality
materials and sturdy design you will enjoy these tools for a long time.
Ive been using the Kelton Hollowers
for many years. I like that they are one
piece with no moving parts or glued in
tips. They dont clog and allow access
into hollow vessels through small
openings. Theyre easy to sharpen, stay
sharp a long time and can be used for
I CROWN[;`
Solid shaft with robust probe for hollowing extremely hard wood. Includes
replacement probe.
Overall length
Blade width 2^
No. 702047
^2& 51.90
`~
7=~Z
No. 702046
&2_ 19.90
H CROWN ~`<;
Ideal for hollowing out deep vessels
made of very hard woods and for delicate
cuts. Compatible with the Crown Cryo
Turning Tool or Crown Revolution.
Cryogenically hardened HSS steel.
Blade width ^
No. 702064
&_2 25.90
`~
7=~Z
No. 702059
&_& 17.50
K ;[;`Z=^#~;;Z;
The Kelton hollowers have been designed
to work the insides
of vessels with
narrow openings.
Thanks to their special geometry, they
do not only help
experts but also beginners with quick
removal of wood as
well as fine smoothening and are, at
the same time easy
to sharpen. Made
out of HSS steel
they have a long lifetime. Three different
head shapes for different vessel shapes
will enable perfect results.
J CROWNZ\`~;|Z]`
;`Z
This long brass sharpening stick will
hold two cutters securely during the
sharpening process.
Overall length 140 mm
No. 702062
&_& 17.50
Blade width 13 mm
Overall length ^
Shaft diameter &^
No. 702073
'_& 102.00
Blade width 16 mm
Overall length ^2
Shaft diameter &2
No. 702074
&&& 144.00
Blade width 19 mm
Overall length 445 mm
Shaft diameter 19 mm
No. 702075
&2 197.00
133
Woodturning Tools
Madrone Set
A
C ; HOOK TOOL
Hook tools have a
long tradition
when it comes
to turning. This
tool has a clever
thought-out
geometry in order
to ensure the safe
turning of bowls
and other moulds.
Besides it is possible to adjust the
angle of the hook
so it suits the
personal liking.
The blade, made
out of HSS steel,
is hardened in a
special method and hence has - compared to conventional hooks - an extra long
lifetime. No matter whether you have
to remove larger chippings or a smooth
surface is needed, this is the perfect tool
for dry as well as for green wood hollowing. Designed by Kel Mc Naughton.
Overall length ^^
Shaft diameter &2
No. 702076
2 67.30
134
1
D ;Z\{\`{\{;Z
These tools do not slip in the hands
through a special plastic wrapping
around the handle. Two simple headless
screws allow an easy exchange of the
insets and safely clamp them. Since
the handles have two ends it is possible
&^&2
shank. The metal core has enough counter-balance for the insets and prevents
vibrations by its large mass.
The surface is bronzed. It is possible to
fix an additional torque arrestor handle in
the crosswise threaded holes at each end
in order to gain better control.
Designed by Kel Mc Naughton.
1 Model Standard KH 2
Overall length
^
No. 702072
'_ 58.00
2 Model Standard KH 3
Overall length 410 mm
^
No. 702077
"' 59.00
B ;\`|;<[Z;Z=
^#~;;Z;
These large bowl blades can be used with
the Kelton McNaughton System Standard and are suitable for large bowls,
plates and similar objects. Max. diameter
of the saved bowl 457 mm.
Blade width ^
No. 702095
&"_2 227.00
2
E ;3\;
\{;;`
Delivered with two
collets for shaft
&^&2
the last 10 cm of the handle can be
filled with lead granules to make the
handle heavier and minimize vibrations.
Overall length
No. 702084
&&&_2 133.00
7;
Woodturning Tools
Tool Sets
are characterised by particularly
high-quality craftsmanship, the
fine bevel of the inner surfaces
facilitates smooth working surfaces
with low cutting forces. Made of
HSS steel with a long edge life.
C CROWN~;`|Z=
^#~;;Z;
HSS tools to make writing equipment.
| "6 &^6
^
rosewood.
Overall length ^
Handle length 140 mm
No. 701988
_&^ 85.00
Lifetime sharpening.
Two free sharpenings.
I
I HATTORI HSS TURNING TOOLS,
3{Z;='#~;;Z;
Versatile set of compact gouges for
spindle turning and small scale faceplate
` =&"6
spindle gouges, 10 mm, curved and flat;
=&^6
=&^6
=&^6
=
=?&^6
parting tool, 4 mm.
Overall length "
Handle length 195 mm
No. 701851
"&2 109.00
135
Woodturning Tools
Oneway
Fitted with the latest technology, these high-precision lathes manufactured in Canada guarantee a long life
and are a pleasure to use. The innovative design combines the benefits of cast materials and the advantages of
stable welded-steel constructions
Tailstock:
^3>
(100 mm travel)
and measuring
scale
Headstock:
3
3^^
?^{'
thread
bearings
'#
indexing
Motor:
#
&[$~%
[$^~%
3
Z
@'&"@&"^@^
A ;[\^2#\;
Unparalleld smoothness and repeat
accuracy:
Heavy professional lathe with external
turning option for all your needs. The
vertically adjustable base frame with
torsion-resistant bed is very heavy and
optimally absorbs vibrations. On the outboard spindle you can work smoothly on
bowls of almost unlimited diameter. The
patented clamping mechanism makes
it easy to lock the tool rest and tailstock
into position without a key.
Specifications:
7^
{7
"&
[
?
7
&"@&&"
steps
&
[_'_
^'
136
Standard equipment:
ping mechanism
Z
&
7
^
^3
centre system
3Z
Driver (drive
centre with
thrust bearing
and cutting ring),
|
;
ting instructions
;
&[$~%
No. 705552
="&_2
[$^~%
No. 705549
=&_&^
5,852.00
6,154.00
Control features:
^=
variable speed
|
up/down
forward / reverse
Woodturning Tools
Headstock:
spindle
3
cone with
3^^?^
DIN 800
thread
bearings
'#
indexing
Tailstock:
^3>
(100 mm travel)
and measuring
scale
Control
features::
levels,
variable
speed
|
up/down
forward /
reverse
Specifications:
7^
{7
&&2
[
?
7
&22@&&2'
&
[_"^
_
Standard equipment:
#
clamping mechanism
#
Z
&&
7
^
Motor:
#
&[
$~%
3
Z
&@_
&@'
A ;[\&2#\;
Medium-weight professional lathe with
external turning option for universal use.
Good value for money. The vertically adjustable base frame with torsion-resistan
^3
centre system
3Z
Driver (drive
centre with
thrust bearing
and cutting ring),
bed is very heavy and optimally absorbs
vibrations. On the outboard spindle you
can work smoothly on big bowls.
|
;
instructions
No. 705554
^=2_&^ 4,369.00
Motor:
#
motor 0.75 KW
(1 HP)
3
Z
&@
&@
Control features:
=
variable speed
|
down
ward / reverse
Tailstock:
3>$'
mm travel) and
measuring scale
B ;[\&#\;
High-quality compact lathe with base
frame and small footprint. The heavy,
torsion-resistant base cabinet with a lowmounted motor for reduced vibrations
can also be used for storage. The offset
tubular bed construction guarantees
almost perfect torsional rigidity and means that chips fall through cleanly. The
patented clamping mechanism makes
it easy to lock the tool rest and tailstock
into position without a key.
Specifications:
7&"
{7
2"
[
?
&&^
&&"
["_
&^2
B
Standard equipment:
#
clamping mechanism
#
Z
_2
7
'
^3
centre system
3Z
Driver (drive
centre with
thrust bearing
and cutting ring),
|
;
ting instructions
No. 705551
=&2'&
2,400.00
137
Woodturning Tools
A ;[\Z~`{`;`[
JACKNUT
For use on lathes with hollow spindles to
clamp workpieces for spindle turning.
Morse taper 3
No. 702123
^"& 46.90
B ;[\;;`;ZZ;3
This system is based on a two-bearing
live centre with a cutting ring and a
threaded shaft onto which you can fit
different attachments including selfmade ones. Comes with a cone that can
be used on both the inside and outside
of turnings, as well as a large point and
knockout rod. Cone diameter 90 mm,
Point diameter 45 mm.
Morse taper
""' 117.90
""' 117.90
C ;[||\;
A clever and stable
tool rest that fits
into every banjo.
Both multi-tip
scrapers and
hollowers can be
guided on this
rotable support.
The rotation of the
yoke enables you to start the cut in an
arch. This circumstance eliminates sideways forces and gives you better control
over your tool. If working on deep bowls
and vessels it is possible to extend the
arm into the workpiece. The surface is
bronzed. The tool is delivered with three
&^=&2=&"
Designed by Kel Mc Naughton.
$&%
No. 702070
^
No. 702088
"'^ 117.00
"'^ 117.00
D ;\`;`Z|]``;`Z
The Kelton Carvers
Jig allows turners
to simply clamp
intricately mounted
objects on the
lathe for further
processing without
having to remove
them from the
chuck. This is done
by clamping the
base across the
board and inserting
Chucks
Oneway Woodturning-Chucks
All chucks of the trademark Oneway are produced in Canada to guarantee high quality and
accuracy. For both chucks Talon / Stronghold many accessories are available, from which
you can choose according to your needs. The bodys are manufactured in one continuous
operation in order to guarantee the highest-possible true running-accuracy.
E ;[\ CHUCKS, TALON
The Oneway Talon chuck is a self centering 4 jaw chuck. Suitable for almost all
turning needs, this is the standard chuck
for the turner. It is easy to handle singlehanded with the help of the included
chuck key. This way you can use your
other hand to position the workpiece. The
body, manufactured out of one piece, is
low vibrating and rotates accurately. A
nickel coating protects the chuck from
rust. The case hardened jaw slides, made
from chrome-nickel-steel, are extremely
wear resistant and run smoothly and exactly in the toothed guiding. Recommended for Woodturning lathes with a swing
lock adaptor, premium profiled jaws size
==
=\
2 Model 1 8 (Inch)
85 mm
Weight
No. 702160
&"_& 232.90
Different taper lock adapter needed? No problem: We carry a whole line of special adapters that can be ordered upon request.
138
Woodturning Tools
B ;[\=[;`\[Z=
~`;33~`];{Z;``\;{
Tower jaws will excel when it comes down to turning long
pieces without tailstock support. It is possible to fix workpieces by clamping or spreading them. The serration on the inside
of the jaws safely fixes the workpiece. The shape of the inner
jaws is not completely round but angled. This patented design
enables the jaws to safely clamp square stock and minimises
the damage of the surface. The jaws
B
also have more contact points than
conventional serrated jaws when
clamping round stock. This enables a
higher clamping force.
Model Talon
Model Talon
Size
^
&@22
'@&&
&@'
"'@&^
No. 702149
No. 702151
"2 53.50
' 60.50
No. 702142
^^^ 39.90
No. 702121
47.90
Model Stronghold
Model Stronghold
Size
^
&@'
"@&_
_@&'
&&&@&"
No. 702130
No. 702132
' 60.50
'' 66.50
C ;[\={;\\[Z
The outside and inside surface of the jaws is smooth and not
serrated. This enables you to gently
C
clamp round workpieces. Only low
clamping force can be practiced due
to the non-serrated inside surface.
Model Talon
Size
^
&@_^
22@"
&@"
'@&
No. 702145
No. 702147
^' 35.80
^__^ 44.90
Model Stronghold
Size
^
4
&@'"
22@&&
"@&_ &&&@&
&'@&^2 &_@&2
No. 702124
No. 702126
No. 702128
^2 42.90
&" 48.90
" 58.90
F ;[\~`;33~`];{Z;``\;{\[Z
Serrated jaws are used during all standard clamping situations.
It is possible to fix workpieces by clamping or spreading
them. The serration on the inside of the jaws safely fixes the
workpiece. The shape of the inner jaws is not completely
round but angled. This patented design
enables the jaws to safely clamp square
stock and minimizes the damage of the
surface. The jaws also have more contact points than conventional serrated
jaws when clamping round stock. This
enables a higher clamping force.
F
Model Talon
Size
_^@&&
'@&&_
No. 702146
&" 48.90
Model Stronghold
Size
^
4
"'@&^^ &&@&
&&@&2 &@&2
No. 702125
No. 702127
22 55.50
'22 57.90
Model Talon
No. 702154
^^_ 40.90
Model Stronghold
No. 702136
^^_ 40.90
D ;[\Z~|\[Z={;\~`];
For clamping smaller pieces these spigot jaws are the
right choice. It is possible to fix workpieces by clamping or
spreading them. The outside and inside surface of the jaws is
smooth and not serrated.
This enables you to gently clamp round
D
workpieces.
Only low clamping force can be
practiced due to the non-serrated
inside surface.
Model Talon
;?
Internal chucking
2@
_@2^
No. 702143
^^^ 39.90
Model Stronghold
;?
Internal chucking
"@
@22
No. 702122
47.90
139
Woodturning Tools
A ;[\=]\;~\;Z;|3;Z
These segments make it possible to clamp complex shapes in
order to finish them, e.g. pieces without stub. No matter, whether you have to work round, oval or angled pieces, the movable
rubber nobs keep hold of each workpiece. The clamping force is
limited due to the construction of the jaws. In order to achieve
larger dimensions of the segments they have been produced out
of aluminium. This way the centrifugal forces are minimized
compared to steel segments.
A
Model Talon
Size
1
&@ &&@&
_^@_^ &@"'
No. 702152
No. 702153
__^ 91.90
'__ 98.50
Model Stronghold
Size
1
^
_2@&2
_@_"
@^
&_@_
&@^
&@^'&
D
1
B Z\``;\~;`Z
Solid callipers made from alloyed toolsteel with smoothed sides and edges.
The opening can be tensioned at the
joint with an adjustable screw that
does not shift during use.
D ;`;]{;`]``{Z
Makes work fabulously easy:
Simply place it on the
end of a round piece of
wood and mark two
lines - the point of their
intersection is the exact
centre. Maximum of
Length &^
No. 707262
2&^ 7.30
E
G
2
E ;`\Z;`;3\`;`
For easy finding and marking the centre
of any round or square blank of up to
150 mm in or across. You fix the marker to the wall, and tap the blank with
a hammer. Then you rotate the blank a
quarter turn and tap again. The result
is two scoring lines that intersect at the
exact centre. 80 x 80 x 70 mm.
No. 707312
&& 25.00
C
F
C Z{;Z~`|\~;`
Robust outside callipers with hinge and
quarter-circle division with set screw.
Satin-finish carbon-steel.
Shaft length 190 mm
Max. opening
No. 707203
&"^ 49.90
140
F 3~\ZZ;Z
Robust hinge dividers with quartercircle division and set screw. Satin-finish
carbon steel.
Shaft length 190 mm
Max. opening
No. 707201
2^ 30.50
G
[{`;`Z\;
ton blended fabric. Velcro fasteners on
sleeves and collar, collar can be secured
=7 =
Size
M
L
No. 701887
No. 701888
No. 701889
^ 59.90
^ 59.90
^ 59.90
Handmade quality!
Diamond-Files | 145
141
Files, Rasps
Files for
Metal Working
Glardon/Vallorbe Files
The traditional Swiss Glardon/Vallorbe Company makes top-quality precision files which meet the
>
?
?
durability and sharpness. The files are designed for working steel, but they are equally suitable for
==7
2#2`
A GLARDON / \`<;]\];Z={<;
Slender, with one narrow cut sides. Double cut.
Cut
Cross section
Cut length
000
000
00
00
00
00
0
0
0
0
0
0
1
1
1
1
^
4
?
2?2
&_?
19 x 4 mm
?
2?2
&?
&?
&_?
19 x 4 mm
?
2?2
&?^
&_?
19 x 4 mm
?
&?
&_?
?
?
?
150 mm
150 mm
100 mm
&
150 mm
150 mm
100 mm
150 mm
150 mm
&
150 mm
No. 705012
No. 705039
No. 705003
No. 705192
No. 705006
No. 705009
No. 704999
No. 705001
No. 705004
No. 705193
No. 705007
No. 705010
No. 705000
No. 705005
No. 705194
No. 705008
No. 705002
No. 705078
No. 705013
No. 705014
No. 705035
'_
&2_
&^
&""
"
&'22
&2
&_^
&&
'
^_2
&^^
&'&
&'
&"^
&_^&
&"^^
^&&
^'_
C GLARDON / \`<;`ZZ|];Z
Double cut.
24.30
34.20
19.90
16.70
23.70
35.10
22.20
19.30
20.50
18.10
24.80
36.60
16.10
21.60
18.80
26.10
20.60
23.00
27.50
28.40
29.80
Cut
Cross section
Cut length
00
0
0
1
1
&?2
15 x 4.5 mm
&?2
15 x 4.5 mm
&?2
150 mm
150 mm
No. 705032
No. 705030
No. 705033
No. 705031
No. 705034
2&^
^'"&
'22
^"'
2&^
D GLARDON / \`<;\]#`{];Z
Double cut.
Cut
Cross section
Cut length
000
00
00
0
0
0
1
1
^
&?2
15 x 4.5 mm
&?2
&^?
15 x 4.5 mm
&?2
15 x 4.5 mm
&?2
15 x 4.5 mm
&?2
15 x 4.5 mm
150 mm
&
150mm
150 mm
150 mm
No. 705086
No. 705022
No. 705025
No. 705020
No. 705023
No. 705026
No. 705024
No. 705027
No. 705068
No. 705087
No. 705069
^2_
_'
^2'"
_^
'"&
^'_
^
^^^
&
^
B F.D.]\];Z=Z|;
For better surface finishes, both narrow sides cut. Single cut.
E GLARDON / \`<;\]#`{];Z=Z3
Files for bow tips, violin f-holes. Double cut.
Cut
Cross section
Cut length
Cut
Cross section
Cut length
&?^
?
0
&?^
&?^
"2
2_
5.90
8.00
66.80
46.30
69.80
47.10
73.10
43.40
32.70
43.90
32.40
34.40
45.90
36.00
48.10
39.90
53.80
41.00
^ 38.10
^2 42.20
F GLARDON / \`<;[\`{|];Z
Slender, with cut sides. Double cut.
142
Cut
Cross section
0
Cut length
&"^^ 23.00
&& 25.00
Files, Rasps
A |\`{\`<;`{];Z
Highest precision files, cut extends right to the tip.
Double cut.
1
2
3
4
5
6
7
8
Cut
0
1
1
1
4 mm
1.5 mm
^^
^2
0.8 mm
1 mm
1.5 mm
150 mm
75 mm
90 mm
100 mm
^'
50 mm
55 mm
2
No. 705097
No. 705094
No. 704926
No. 704927
No. 705092
No. 705093
No. 705066
No. 705057
&_'
&"
_2
'"&
&"
&&&'
&"
&"
20.80
18.20
9.10
10.60
12.60
13.30
12.60
12.60
B GLARDON / \`<;\<Z];Z
Habilis files have slender square tangs which serve as handles,
making them suitable for particularly delicate work.
2#2`{ 7&
Overall length &
Cut length 105 mm
1
2
3
4
5
Form
Cross section
Flat
Half-round
Tree-square
Square
Round
&?2
&?^
9.4 mm
5.8x5.8 mm
2
No. 704930
No. 704931
No. 704932
No. 704933
No. 704921
&2"
&2&^
&^'
&
&'
15.10
19.20
18.30
18.50
12.00
Single Cut
Double Cut
"
#$
Second cut First cut
Chisel blade
Cut angle
Shoulder
File
Tang
Cut length
Uses:
Advantages:
Universal use
Advantage:
Uses:
Disadvantage:
143
Files, Rasps
A GLARDON / \`<;;;{;];Z
For precision work on metal and wood. With round, knurled
2#22`
Cut 0 = coarse, cut 1 = fine. Double cut.
Overall length 140 mm
Cut length 75 mm
Form
Cut
1 Flat
Flat
2 Warding
Warding
3 Three-square
Three-square
4 Square
Square
5 Round
Round
6 Barrette
Barrette
7 Half-round
Half-round
0
1
0
1
0
1
0
1
0
1
0
1
0
1
No. 705140
No. 705040
No. 705141
No. 705041
No. 705142
No. 705042
No. 705143
No. 705043
No. 705144
No. 705044
No. 705145
No. 705045
No. 705146
No. 705046
_&
_&
2_
2_
2_
2_
__^
__^
_&
_&
2_
2_
_^&
_^&
6.80
6.80
8.00
8.00
8.00
8.00
9.20
9.20
6.80
6.80
8.00
8.00
8.70
8.70
GLARDON / \`<;;;{;];Z=
2#~;;Z;
2#}]=
#
=
triangular, square, round, barrette.
Cut
0
1
Glardon/Vallorbe Valtitan-Files
The perfect files for knife-makers:
\_`=
7
7
to file, e.g. hardened steel, sintered steel, HSS etc. to be filed without breaking teeth. Other advantages: Valtitan
files do not clog, they are largely rust-proof and even more powerful. They impress users with greater chip remo
|
7
2`
B GLARDON / \`<;\\]\];Z
Double cut. Cut 0.
Cross section
Cut length
^_" 41.40
'_ 34.20
2_ 24.60
Cut length
144
^&_ 35.90
&"^ 26.10
D GLARDON / \`<;\\`;;#Z\`;];
Double cut. Cut 0.
Width
Cut length
&
^&"^ 38.00
E GLARDON / \`<;\\\]#`{];Z
Double cut. Cut 0.
Cross section
Cut length
2 54.80
^& 41.90
F GLARDON / \`<;\\`{];
Double cut. Cut 0.
Cut length
7.5 mm
_" 29.50
No. 705054
No. 705053
^_'
^_'
45.00
45.00
Files, Rasps
A F.D.;;`|];
To prevent the fingers
from slipping, checkerings are cut into knife
handles and on the
backs of blades. The
checkering file is especially suited for this
task. The extraordinary
cut originates through lengthwise grooves
7
7"
grooves. Through this cut small teeth are
formed which cut on the push stroke. To
produce the checkering the file is moved
in one spot forward and backwards.
Suited for wood, non-ferrous metals and
unhardened steel.
Cut 00
Cut length 150 mm
Cross section &"?
No. 704410
^2 43.10
B F.D.3Z\[];
The ideal file for the
ambitious knife maker,
who makes his own
blade. The round
edges help to file the
transition form the
blade to the ricasso
an area which is an
important attribute of
a high quality blade.
Cut ^
Cut length
Cross section ?
No. 704411
_&
8.50
Diamond Files
F
C
C {\3{];Z=3`Z\
WITH TANG
This robust file with handle tang is ideal
for fast and effective removal of material
on large surfaces, e.g. on hardened knife
7|
{&2
&
Overall length
Coating length 100 mm
Cross section &?^
No. 704418
65.50
D {\3{;;{;];Z=
MONOCRYSTALIN
For sharpening tool blades and working
on small workpieces.
|
{&2
&
Overall length 150 mm
Coating length 75 mm
Form
1 half-round
No. 704417
2
No. 704416
&'' 18.90
&'' 18.90
E {\3{;;{;
];Z=3`Z\=
#~;;Z;
Flat 5 x 1.5 mm,
#` ?=
Z>
=
Triangular 4 mm,
` ^
|
{&2
&
Overall length 150 mm
Coating length 75 mm
No. 704415
'__ 98.50
G {\3{;;{;];Z=
~`Z\=&#~;;Z;
]2?&=
#
?=
>
=
#>
^=
^=
?&=
#
?&=7
?=
?=
^?
mm. Grit D107 corresponds to grit 150.
Overall length 140 mm
Coating length 50 mm
No. 711044
^" 28.50
145
Files, Rasps
D ~`;Z\{|`{;`
Lasts 50x longer than sandpaper:
For fine work in making models and
musical instruments, also suitable for
deburring aluminium and plastic parts.
Particularly suitable for controlled removal of material in hard-to-reach areas,
grinds in both directions. Sturdy diecast
aluminium handle, shoe with easy to
remove and replace hardened steel
grinding plate. Please sand on a sample
piece first. Surface of the sanding pad
may leave black stains during first use
(anti-corrosion coating). This is no sign
of bad quality and needs only to be done
during first contact with wood.
|
^
146
Files, Rasps
Hand-Cut Rasps
7
=
7?
}
=
?7
hand (using a special pointed punch and hammer) into the body of the rasp before it was hardened. Because
of the slightly varying depths and distances of the individual teeth, the work face is slightly inhomogeneous in
texture. This leads to a smoother cutting performance on fibrous material such as wood (no chattering).
For this reason, professionals still prefer hand-cut rasps even today.
;`{3~`;Z]\`\Z~Z=[\{;\|
Cut
Cross section
Cut length
^
4
5
'" 33.90
^&2 37.20
^'' 42.70
;`{3~`;Z]\`\Z~Z
Cut
Cross section
5
5
5
Cut length
2_ 24.60
^' 30.20
^& 41.90
;`{3~`;Z]\`\Z~ZULTRA
Over 10,000 teeth.
Cut
Cross section
10
;`{3~`;Z\]#`{`\Z~Z
Cut
Cross section
^
5
5
E
B
Cut length
^&_ 35.90
'" 33.90
^^" 40.40
;`{3~`;Z\]#`{`\Z~Z=Z3
Cut
Cross section
^
5
Cut length
;`{3~`;Z`ZZ|`\Z~Z
Cut
Cross section
'2 27.20
"_ 30.90
Cut length
^&& 36.90
Cut length
'_"' 104.70
;`{3~`;Z\<;`\Z~Z
Cut
Cross section
Cut length
^
4
4
5
5
_?
_?
^?2
17 x 4 mm
_?
150 mm
No. 704720
No. 704721
No. 704727
No. 704716
No. 704722
^^&&
^2'"
^
^_
^'""
39.40
43.90
64.30
38.40
46.40
;`{3~`;Z\<;`\Z~ZULTRA
Over 10,000 teeth.
Cut
Cross section
10
Cut length
'_"' 104.70
147
Files, Rasps
A ;`{3`]];`Z='#~;;Z;
Crafted and hardened with great care by
master craftspeople. For shaping convex
and concave surfaces. The teeth are cut
on both sides, the ends bent in opposite
directions. Square mid-section. Comes
;>=
=
pezoid, square, three-square, half-round,
crossing, round.
Overall length 185 mm
Cut length 55 mm
Cut 4
No. 704599
&2_& 198.90
A
Hattori Rasps
Our portfolio of Hattori rasps, which are cut in small batches by hand, is unique through ;
{
=7
for money. The arched arrangement of the teeth makes these rasps incredibly effective and
provides smooth results. Blades made of C45 carbon-steel.
B HATTORI]\`\Z~Z=;`\[{;
Cross section 40 x 4 mm
Cut length
Cut 4
No. 704682
&" 12.60
Cross section
Cut length
?
E
Cut
C HATTORIZ;3\;`Z`\Z~Z=
VARIATIONS
Half-round, flat, each with a coarse rasp
and file cut. For leather and wood.
Cross section ^?
Overall length
No. 704688
2 5.50
2
7.20
HATTORI ]\`\Z~=[~;{\|
Cross section
2 ?
7
&?^
Cut
Cross section
5
5
7
Cut length
_& 5.60
'_ 10.20
^_ 5.20
Cut length
'_ 10.20
_& 5.60
F HATTORI `\Z~Z=\<;Z~;\
;?
=
7
Cut
Cross section
Cut length
^?
148
HATTORI]\`\Z~Z=[\{;\|
Cut
8.70
Cross section
Cut length
^
4
?
?
_& 6.80
'_ 10.20
Cut
Cut length
^
8 mm
2
_^&
HATTORI\<;`\Z~Z
Cut
_^"
22
8.80
7.90
_&
"
5.60
5.10
Cut
Cross section
Cut length
2
7
15 x 4 mm
'?
Files, Rasps
A
A HATTORI`\Z~Z=#~;;Z;
}
=
7
=&
half-round rasp, 85 mm riffler.
Cut 4
No. 704579
^^&& 39.40
B HATTORI `]];`Z;Z=
'#~;;Z;
8 rasps, each with different head shapes,
suitable for a variety of applications in
stairbuilding and sculpting and soapsto
^
Small
Overall length 180 mm
Cut length 50 mm
No. 704680
&22 19.80
C HATTORI 3#`]];`#Z;=
#~;;Z;
For model-making, making musical
instruments etc.
Overall length &@&'
Cut length @
Cut 4
No. 704681
&^'_ 16.50
D `;`<Z=#~;;Z;
With a coarse rasp hand-cut, for wood
and plastic.
&2
No. 704690
'_ 10.20
Medium
Overall length 190 mm
Cut length 50 mm
No. 704559
26.80
Large
Overall length _
Cut length 70 mm
No. 704578
2"_ 32.10
Machine-Cut Rasps
E F.D.]`\Z~];
Large rasp which can be used on both
sides: extra coarse, machine-raised rasp
teeth on one side and a very coarse file
pattern on the other. Also suitable for
softwood, plastics, soapstone, etc.
Cross section 40 x 5 mm
Cut length ^
No. 704563
2 30.30
G GLARDON / \`<;;;{;
`\Z~Z=2#~;;Z;
Precision needle rasps made of extra
$2#2`%Z=2}
flat, flat-pointed, half-round, triangular,
square, round.
Overall length 140 mm
Cut length 75 mm
Cut 4
No. 704565
2^" 67.10
H F.D. RASPS
Standard rasps for working on wood,
$"#2`%
^
1 Flat Rasp
Cross section ?
Cut length
No. 704601
22
7.90
2 Half-Round Rasp
Cross section ?_
Cut length
No. 704602
&&& 13.10
3 Cabinet Rasp
Cross section ?
Cut length
No. 704603
'' 10.50
149
Files, Rasps
Advantages:
;
7
C SAW RASP
Fine saw blade wrapped around an oval
wooden rod for working softwoods and
making structures.
Overall length &
Cut length 80 mm
Cross section &?
No. 704689
^ 4.80
Microplane Rasps
Unbeatable removal of material
thanks to hundreds of fine blades.
In a patented chemical process, a
grid of teeth is etched from the raw
blade material. Unlike punched
teeth, the teeth created in this process are burr-free and sharp. The
stainless steel blades are hardened
2`
Use:
and cabinetmaking
Advantages:
{#
;
7
D 3`~\;~\;`\Z~=]\=
\`|;
For use in pull direction. Coarse teeth.
Overall length ^
Cut length
Cross section 2?'
No. 705169
&2_2 19.95
D
E 3`~\;~\;`\Z~=
`{=\`|;
Coarse teeth.
Overall length ^
Cut length
&2
No. 704200
&' 18.85
F 3`~\; SNAP-IN RASP,
<\ZZ;
Snap-in handle with replaceable blades
for use in a push or pull direction. Inclu
7=
Overall length ^'
Cut length
Cross section 2?"
No. 704203
&'& 25.95
150
3`~\;Z\~#<\{;Z
Flat - fine
Cross section 2?"
No. 704204
&_ 14.60
Flat - coarse
Cross section 2?"
No. 704207
&_ 14.60
Round - coarse
Cross section
No. 704205
&_ 14.60
H 3`~\;`\`Z\~;`
Shaping head for use in drills, aluminium
body with cutter insert.
Overall length 70 mm
50 mm
No. 704988
&'&" 21.65
Repl. Blade No. 704989 &_ 14.60
Files, Rasps
Superhard File Rasps
Robust rasps for working on hard
materials. The sharp, curved blades
remove material effectively and
divert the chips towards the side.
2`
?
mely long edge lives.
Use:
=
`
Advantages:
\
;
7
Z
Z~;`\`{];`\Z~Z
Lie-Nielsen Floats
The term float for an extra-coarse
single-cut file goes back to the
19th century. Formerly developed
for making wooden plane bodies,
they are now also used for surfaces
that are difficult to work on in cabi\
`
allows resharpening by hand with a
triangular file.
Use:
]
]
7
]
Advantages:
allows precise working
`
7
B ;#;Z;<;{]\Z
Special float for finishing wooden plane
bodies. Rectangular maple handle.
Overall length ^
Cut length 150 mm
Cross section 2?
No. 715160
"' 59.00
C ;#;Z; 3`Z;]\Z
Slim float for the precise finishing of
mortises. Octagonal, tapered maple
handle.
Overall length
Cut length 90 mm
Cross section &?2
No. 715161
"' 59.00
D
B
C
D `\Z~\{];Z;=^#~;;Z;
This set comprises the three most
common file and rasp models for working
wood, metal and plastic and is thus a
must for every workshop. A simple tool
roll protects the tools from dirt and damage during transport. Handles included.
Set includes:
Z
#` `
151
Files, Rasps
A `Z;[{\{;Z
~
;
;
Indian rosewood. Polished, heavy duty ferrule.
C <[{\{;Z
Polished boxwood, powerful ferrule.
Ferrule diameter
Length
&2
70 mm
No. 701604
^
2.80
Ferrule diameter
Length
15 mm
18 mm
85 mm
85 mm
No. 701618
No. 701619
^'
^'
3.90
3.90
Ferrule diameter
Length
15 mm
18 mm
^'
2^"
6.40
7.60
B ;`Z\\{;Z
Octagonal, with a round neck. Untreated Swiss pear wood.
Ferrule diameter
Length
15 mm
19 mm
90 mm No. 701605
& No. 701606
_&
&
5.60
6.20
F ];;\;`
For cleaning file and rasp teeth.
Beechwood with brass bistels.
Head 40 x 100 mm
No. 705091
_"
9.40
D <[{\{;=<\#Z\~;{\{;
Polished boxwood, powerful tang ferrule.
Ferrule diameter
Length
18 mm
2&
2&
2&
3.10
3.10
3.10
E ];\{;Z=Z`;[#
For files with pointed tangs, fastening via internal threads,
plastic.
Internal thread
diameter
Length
7 mm
9 mm
11 mm
_"
_"
&^
5.70
5.70
6.10
_&2&'
_&2&"
_&2&2
_&2&_
_&2
_&22
_&2
_&2&
_&2
_&2^
_"
704955
_"2
_
_2_^
_2_2
704741
704757
_"
_2
_
704574
_2_
_2_^
_2_
_2__
704704
__^^
704741
_"^
_"
705000
_
_
_^
_
_'
_^
_^&
_2'
_2"
705097
_^
_2
704455
704551
_2_'
704704
__&2
__^
_^
705004
705005
705078
704400
704401
_^
704404
704410
704411
_^
_^
__
__2
_2&
_2
_2_&
_2_
_2_
_2_'
_2'
_2'
_2'2
704707
__
__&
__
__
704901
_"
_2
705007
705008
_&
_&^
705014
_
_2
__
_^
_^^
_^
_^
_'2
705087
_&"
_&"^
705194
_&&_
_
_2
704574
_2_^
_2_2
_2__
704704
__^^
704757
704999
705000
705001
_
_
_
_^
_
_^
_^&
_2'
_2"
704400
704401
_^
_2
704407
704408
704410
704411
_^
_^
__
__2
704585
_2&
_2
_2_&
_2_
_2_
_2_'
_2'
_2'2
704704
704707
__
__&
__
__
___
704755
704901
_2
705007
705008
_&
_&^
705014
_
_2
__
_^
_^^
_^
_^
_'2
705087
_&"
_&"^
705194
_&&_
711087
_
704574
_2_^
_2_2
__^^
704741
_"^
_"
704999
705000
705001
_
_'
_"
704401
_
_^
704404
_2
704414
704455
704551
_2__
_2_'
704704
__&2
__^
_"^
_"
_^
705004
705005
_
_^
_
_^
_2'
_2"
_&"
_&"^
705194
704400
704401
_^
704407
704408
704410
704411
704455
__
704574
__2
_2&
_2
_2_&
_2_
_2_
_2_'
_2'
_2'2
704707
__
__&
__
__
704755
704901
_"
_^
705004
705005
_2
705007
_
_^
_
_
_2
__
_^
_^
_^^
_^
_2'
_2"
_'2
705087
_&"
_&"^
705194
704400
704401
704405
_^
_^
__
__2
_2
_2'
704707
__
__&
__
___
704901
_"
_2
705007
705008
_&
_&^
705014
_
__
_^
_'2
705087
_&&_
704400
704404
704407
704408
704410
_^
_^
_2_
_2_
704714
___
704755
_"
_2
705007
705008
_&^
705014
_
_2
__
_^
_^^
_^
_^
_'2
705087
_
_2
__
__
__&
__
__
704901
_
_^
_
_^
_^&
_2'
_2"
_&"
_&"^
705194
704405
_
_2_
_2_
_2__
704709
704741
_"^
_"
705010
_'
_"
_^&
_^"
152
153
Measuring Instruments
Rules
A
Precision Rules
Highly wear-resistant rule made of
hardchrome-plated stainless steel.
Hardened with milled edges. Matt
finish and deep-etched mm scale.
Thickness 2 mm
Width 40 mm
Length 1.5 m
No. 717126
91.60 109.00
B PRECISION RULE,
SEMI-RIGID DESIGN
Thickness 1 mm
Width 35 mm
Length
E FLEXIBLE RULE
Flexible rule for marking, scribing or
transferring curves and arches. Vinyl with
a lead core, mm and inch scale, inking
edge.
Length 600 mm
No. 708094
4.62 5.50
154
Incra Rules
With these new marking rules you
are guaranteed accurate marking.
As well as the conventional scale,
these rules have marking holes or
slots which allow exact guidance
of a sharp pencil or a 0.5 mm
mechanical
pencil for precise
markings. The
thin stainless steel
rules have a matt
anti-reflective
surface for high
reading accuracy.
A
C
Length
Length
150 mm No. 707516 10.84 12.90 150 mm No. 707518 16.72 19.90
300 mm No. 707517 16.72 19.90 300 mm No. 707519 22.61 26.90
E
E INCRA PRECISION PROTRACTOR
` 7
~
drawing a pencil
Length 160 mm
No. 707522
31.01 36.90
Length
1 Normal Scale
No. 708024
2 Reverse Scale
No. 708035
6.64
7.90
6.64
7.90
F
1
G HULTAFORS FIBREGLASS
FOLDING RULE
Exact 90 locking:
Locking into place
at exactly 90, this
polyamide Swedish
rule is an extremely
versatile tool. Reinforced with fibreglass,
it is extremely durable and very stable.
The measuring scale is imprinted on both
sides, making it easy to read even after
years of use.
Width 15 mm
Length 2 m
No. 708025
6.30 7.50
I
H
1 Native Woods
Sycamore, birch, oak, alder, ash, sweet
chestnut, cherry, larch, robinia, beech.
Length 2 m
No. 708029
16.72 19.90
2 Brazilian Woods
Amap, Jatob, Louro Gamela, Louro
Itauba, Louro Preto, Muiracatiara,
Muirapiranga, Pau Amarelo, Sucupira
Vermelho, Violeta.
Length 2 m
No. 708030
19.24 22.90
155
Belt clip
3
Material
1 Rosewood
No. 707160
2 Ebony
No. 707158
8.32
9.90
10.00 11.90
1 2 m 16 mm
No. 708036
2 3 m 16 mm
No. 708037
3 6 m 25 mm
No. 708039
65 x 55 x 24 mm
17.56 20.90
70 x 60 x 26 mm
22.61 26.90
95 x 70 x 36 mm
33.53 39.90
Callipers
D
1
156
D DIGITAL CALLIPERS
Multi-purpose callipers with a large
five-digit LCD display for internal and
external depth measurement. Display
77
Resolution of 0.01 mm. Display can be
zeroed at any position. Stainless steel
slide, hardened faces, incl. 1.5 V battery,
plastic case.
E DIAL CALLIPER
A sturdy dial calliper with a shock- and
dust-proof analogue dial indicator, ideal
for workshop use. Stainless steel slide
and dial, with hardened faces, two
screws for locking the slide and calibration ring in place; accurate to within
0.01 mm, plastic case.
Measuring range 150 mm
Tip length 40 mm
No. 707259
32.77 39.00
F PLASTIC DIAL CALLIPER
Extra-light and durable GRP dial callipers that are gentle on the workpiece.
Recommended for mobile use and for
measuring sensitive parts, e.g. in restoration work. External, internal and depth
&&
=
with wall bracket.
Measuring range 150 mm
Tip length 40 mm
No. 707225
20.92 24.90
G PRECISION CALLIPER
Bevelled scale for parallax-free reading.
Deep-etched stainless steel, slide with
locking screw.
Measuring range 150 mm
Tip length 40 mm
No. 707303
17.23 20.50
A KFER CALLIPER
For measuring the wall thickness of
musical instruments, cladding, hollow
bodies and veneer etc. Robust cast-aluminium frame with precision dial gauge.
Measuring range is 30 mm, display accuracy is 0.1 mm. A left-handed version is
available on request.
Jaw depth 200 mm
No. 707101
182.35 217.00
Protractors
B PRECISION PROTRACTORS
With precise angle markings, running in
both directions (0-180), stainless steel.
1 Precision Protractors,
Scale width 90 mm
Shaft length 150 mm
No. 717148
13.61 16.20
1
2 Precision Protractors,
Scale width 120 mm
Chrome-plated, matt surface with
deep-etched scale.
Shaft length 238 mm
No. 717140
25.13 29.90
Squares
F GERMAN CARPENTER`S SQUARE
The standard square for every carpenter
is made of stainless spring steel and
has a seamless cut. A etched scale on
both sides of the square can be used
for external and internal measuring. The
holes, spaced 5 mm apart, on the short
shank are used for parallel marking. For
this technique the long shank works as a
fence and the oval-shaped holes centre
the pencil during pulling.
Accuracy 0.005 mm per 1 cm length.
Thickness 1.2 mm
Width 35 mm
Dimensions 800 x 320 mm
No. 707279
20.92 24.90
157
A SQUARE SASHIGANE
This light and easy-to-read stainless steel
square is used not only
as a framing square
and scale, but also as
an angle of inclination
Circumference
and try square. The blade is 15 mm wide, the
standard measurement
in Japan for tenons and
board thicknesses. The
front of the square has
Square
the usual deep-etched
metric markings (mm).
The back has two
Cross-section
calibrations: one gives
the diameter (x 3.14)
and the other the length of one side
of a square inscribed by that diameter
(x 0.7). The bevelled edges and slight
hollow grind prevent ink markings from
being smudged.
Thickness 1.3 mm
Width 15 mm
Dimensions 510 x 250 mm
No. 717130
26.81 31.90
Tips:
The Sashigane
500 mm can also
be used as a try
square. Simply bend the longer side
slightly and place it flush against the
workpiece.
Check the accuracy of the Sashigane
on any straight edge by marking a
perpendicular line, turning the square
over and remarking the same line. If
the line is not identical, the square is
inaccurate and should be adjusted.
Tongue length
Tongue length
E
E ULMIA PRECISION SQUARE
This square from Ulmia satisfies all the
requirements of an optimum measuring
tool. The stock is made of fine rosewood
with hand recesses and is protected by
two brass edges
with dovetail
joint. The hardened steel blade
158
Tongue length
45 mm No. 707274
60 mm No. 717120
100 mm No. 717121
8.74 10.40
8.74 10.40
8.74 10.40
F
E HULTAFORS
FOLDING SQUARE
QUATTRO 25
Unbeatable
positioning accuracy thanks to
4 stainless steel
locking pins. You
can set the folding
square to three
positions (45, 90
and 135) with zero
Tongue length
1 45 / 90 Square
169 x 63 x 73 mm
For mitres and cross-cuts.
No. 717122
15.88 18.90
2 45 / 45 Square
200 x 63 x 73 mm
For marking pairs of mitres.
Angle Z>
No. 717123
16.72 19.90
159
B DOVETAIL GAUGE
For marking straight and angled dovetail
joints, 1:8 ratio. Adjustable width (6-40
mm) and angle, stainless steel.
Blade and guide length 150 mm.
No. 707179
17.56 20.90
1:6 (softwood)
Dimensions 40 x 50 x 65 mm
No. 703654
13.03 15.50
C LIE-NIELSEN DOVETAIL MARKER
Smart precision marker for laying out
dovetail joints with two different slopes
for hardwood (1:7) and softwood (1:6).
Brass plate with mortised cocobolo stock.
Plate 45 x 45 mm, Height 32 mm.
No. 707284
28.49 33.90
1:8 (hardwood)
Dimensions 40 x 50 x 65 mm
No. 703655
13.03 15.50
itself. With careful consideration of where you place the tool along the edges of
the workpiece, you can greatly reduce the
time required for marking because you
do not have to set any opposite angles.
Stainless spring steel with deep-etched
scale. Scale division 0.5.
Thickness 1.2 mm
Width 35 mm
Dimensions 795 x 430 mm
No. 707316
66.30 78.90
Starrett
For over 130 years, Starrett has been designing and manufacturing precision measuring tools for crafts and
industry. The US-American company attaches the greatest importance to the precision and durability of their
tools.
160
2
A
B
B VERITAS PRECISION SLIDING
BEVELS
Precision sliding
bevels with onehanded blade
locking, integrated
E
E ULMIA PRECISION BEVEL
For measuring, transferring and scribing
angles. Stock made of rosewood, ends
protected by inlaid riveted brass plates.
Simple locking of the hardened blued
G
G SLIDING BEVEL, ROSEWOOD
Stock made of Rosewood with brass
fittings. Angles are fixed through an adjustment screw, which is not in the way
like a lever when marking or transferring
161
B
A ALUMINIUM BEVEL
Extra-long aluminium bevel for use
in carpentry. Because of its size, the
friction clamp is easy to handle and,
thanks to the locking mechanism, can
be positioned conveniently outside the
working area.
Stock length 600 mm
Tongue length 550 mm
No. 707317
40.25 47.90
C PANTOGRAPH
Classic tool:
The pantograph (Greek for all-round
writer) transfers drawings, contours and
profiles in the same, larger or smaller
scale from the plan to the workpiece and thus saves a detour via the computer
and photocopier.
D POINT.2.POINT
For laying
out equal
spacings, e.g.,
for dovetails,
dowels, etc.
Extends to 600
mm and can be
E STAIR SPIDER
Six legs (calliper gauges) of hardened
spring band steel easily transfer even
the most complex stair shape for making
templates or directly to the raw material
for the next step. Locked with a wing nut.
Comes in a wooden box.
E
G
1
2
F PROFILE GAUGES WITH PLASTIC
BLADES
For measuring and transferring profiles.
No offset necessary, as blades are flush
with the frame.
Blade thickness 1.3 mm.
Working depth 40 mm
Overall length
Profile gauges
Create a positive and negative image
of any profile by pressing. The ease of
use is only surpassed by the wide range of possible applications. Restorers
and turners can use this for copying
profiles, floor layers can use it for
fitting work, boat builders and violin
makers can use it for checking arches.
Flatness Inspection
H
162
I PRECISION BEVEL
EDGE RULE
Highest precision:
The best way of checking if
a surface is flat is with this
straight edge, using the lightgap method. The rules are
bevelled on the measurement
edge and have a textured rubber
situation. The
magnifying effect
of both vials
allows easy
reading, while a
rubber end cap
Dimensions 600 x 60 x 27 mm
Weight 640 g
No. 707295
50.34 59.90
Dimensions 800 x 60 x 27 mm
Weight 800 g
No. 707296
58.74 69.90
Dimensions 600 x 50 x 22 mm
Weight 390 g
No. 707293
24.79 29.50
Dimensions 800 x 50 x 22 mm
Weight 500 g
No. 707294
28.24 33.60
C
C SPIRIT LEVEL, ROSEWOOD
Fine, compact spirit level in the traditional torpedo form. Rosewood with
brass fittings.
Dimensions 230 x 19 x 38 mm
No. 707177
25.13 29.90
G
F
F SHINWA LINE SPIRIT LEVEL
You can use this ultra-light spirit level
to check whether a tensioned line guide
is level or not. The spirit level is hung
on the line by the two eyelets for this.
It can also be used as a normal surface
spirit level.
Weight 15 g
Overall length 100 mm
No. 707226
9.16 10.90
G GRADOMETER
Compact Japanese level for accurately
measuring oblique or inclination angles,
e.g. in carpentry, interior extensions or
plumbing. Rotating bubble level with
angle, graduated and inclination scale,
"=
}#&\=
V-shaped groove (for pipes, etc.), rubber
impact protection.
Overall length 100 mm
No. 717158
18.40 21.90
Surveying tools
Retrievers, Pickups and Tweezers
I
I PRECISION TWEEZER SET,
6-PIECE SET
High-quality tweezers for technical applications. Pointed 120 mm, 150 mm and
180 mm; Cranked 175 mm; Flat with
locking slide 165 mm; Reverse action
(self locking) 165 mm.
No. 707143
9.16 10.90
163
Optical Survey
C BEND-A-LIGHT
This lamp with a flexible, coated brass
shaft provides bright light in hollow
and hard-to-reach spaces. The supplied
protective tube can also be fitted onto
the handle to extend it.
A RETRIEVER
For grasping and
holding hard-to-reach
objects (stringed instrument sound posts,
etc). Flexible shaft made from corrugated
hose (retains its position once bent).
With three claws. Mount approx. 16 mm.
9 mm
Overall length 500 mm
No. 717190
19.24 22.90
1 Bend-A-Light, Short
Short version with krypton bulb and compartment for 2 AA 1.5 V batteries.
Incl. batteries.
Head diameter 5 mm
Shaft length 250 mm
Overall length 400 mm
No. 708001
30.42 36.20
Replacement Bulb
No. 708002
8.07 9.60
2 Bend-A-Light, Long
Long version with LED bulb and compartment for 3 AA 1.5 V batteries.
Incl. batteries.
Head diameter 5 mm
Shaft length 380 mm
Overall length 620 mm
No. 708005
37.82 45.00
Replacement Bulb
No. 708014
16.64 19.80
D INSPECTION MIRROR
For inspecting hollow bodies and positions that are difficult
to access. 170 mm
version with flexible
mirror shaft, bendable
into any position.
30 mm
Overall length
164
E TELESCOPIC MIRROR
Double ball-jointed mirror with telescopic
handle. Fits into any shirt pocket thanks
to its compact length.
30 mm
Overall length 195 690 mm
(telescopic)
No. 707112
12.52 14.90
F MOISTURE METER
Nothing is more
irritating than
the drying cracks
or heavy warping
that can occur
after working on
wood that is too
wet. This
moisture meter
provides assistance with two different
measuring modes: search mode provides
non-destructive measurement to a depth
of 5 cm, needle mode measures to a
depth of 1.2 cm. Also suitable for concrete. Measuring range of 0-80%. Sturdy
professional quality in a plastic case with
wooden chart.
Incl. 4 AAA 1,5 V batteries.
No. 707285
205.04 244.00
Scribing and
Cutting Tools
;?
7
165
Scribing Tools
Marking Gauges
A ;`\Z{\3\`||\|;
Two independently adjustable guide rods
make this marking gauge an ideal tool
for mortise and tenon joints. To ensure
precise scribing, both knives are arranged
in such a way that the knife bevels are
always set in the waste of the cut. The
B ;`\Z 3\`||\|;Z
Precise scribing guaranteed! This cutting
wheel is bevelled on one side only, facilitating accurate and reliable results even
when cutting end grain or difficult grain
patterns. Jerk-free adjustment thanks to
precision guide with friction brake. Steel
rod, hardened cutter, anodised aluminium head with brass fence and adjustment screw. Deep-etches scale in mm.
C 3~`;Z3\`||\|;
Can be used with a needle or scribing
knife:
This compact marking gauge is an
ingenious scribing tool for wood
joints, small wooden objects,
model making and craft carpentry.
It can be fitted with a straight or
disc-shaped scribing knife or a
needle, according to preference.
The fence, which is locked in
place with a clamping sleeve, may
also be adjusted with one hand;
its asymmetric shape makes
precise scribing possible, even
&
blades, 1 disc knife, 1 needle.
Working range @'
No. 703645
_ 26.50
D ULMIA 3\`||\|;[{Z
];
Instead of being
scratched, the mark is
cut with a disc blade,
without tearing. While
scribers tend to follow
the grain, the disc blade holds an exact course even across the
grain and with difficult fibre flows. The
single-bevel blade is easy to remove and
sharpen. Marking gauge head made of
hornbeam with inlaid measurement scale
0-150 mm, block surface has hardwood
layer with undulating glued join, brass
locking screw.
Working range @&
No. 707164
22 55.50
E CROWN~\;;{3\`|
|\|;
Precisely manufactured marking gauge
F CROWN33\`||\|;
Beautiful handy marking gauge of
=;
The wedge-locked V-cutter cuts the fibre,
which helps it stay true.
Working range ^@&&
No. 707175
& 14.90
G
G \~\;Z;3\`||\|;=Z|;
;`=[;{|;
|
2
Working range @&
No. 717100
&' 12.90
Repl. Blade No. 717108
2.90
H
H \~\;Z;3\`||\|;=Z|;
;`=Z`;[\3~|
Working range @&
No. 717101
&2_ 19.60
Repl. Blade No. 717108
2.90
I
I \~\;Z;3\`||\|;={\
;`Z=Z`;[\3~|
For marking parallel lines.
Working range @"
No. 717107
&^^ 15.50
J 3~\ZZ;Z
;]
gunmetal finished steel, with hardened
points, quick-acting screws.
166
K ;`\Z|Z`<;Z`<;`
;
7 7}
For transferring
contours to
round stock,
especially for
marking corner
joints (log home
building). The
two built-in
levels allow very high precision marking
results. Two steel pins with a pointed tip
for compass work and a rounded tip for
smooth scribing, pencil holder. Aluminium body with brass fittings, solid plastic
case. Instructions included.
Max. opening ^
No. 707269
'' 105.00
B
C
A KUNZ 3~\ZZ;\{Z
For building beam compasses. Grey cast
iron heads with pencil holders and steel
points.
Max. opening ^
No. 707217
&'" 22.00
B ;`\Z<;\33~\ZZ;\{Z
For making compasses of
any size. Two aluminium
heads with pencil holders
and steel points, one of
which is eccentric to facilitate fine adjustment.
Brass hardware. Can be
mounted on any thin piece of wood.
No. 707231
'_ 58.00
C ~\`\;3\`;`
Unspectacular but essential:
Ideal for marking built-in elements,
joints, door casings, etc. Guide it
along the reference surface and the
adjustable pencil draws the marking
line. Can also be used as a compass,
D SHINWA;
Similar in function to a chalk line, an
ink line is used to mark straight lines on
wood and other materials. A fine silk line
is drawn out through an ink-soaked wad
of cotton, tensioned and then snapped
against the workpiece. This allows you
to mark very long (up to 10 m), fine and
exceptionally accurate lines, also on
un-even workpieces. Can also be used
as a plumb line. Unbreakable plastic
body, leak-proof, auto-rewind thread.
E SHINWA3;
Professional quality, compact ink line.
Auto-rewind thread. Ink not included.
Operating instructions included.
&?_?^
Thread length 15 m
No. 717299
26.70
Repl. Thread No. 717294
2.90
G \;~[;`[{;`
=^}&
gear ratio for fast rewinding, and fast
unwinding without turning the crank.
Chalk view window in high-impact ABS
plastic housing lets you see exactly
how much chalk you have left. Slide-in
compartment for quick filling, steel crank
and hook fold into the case. Chalk not
&^?_?
Thread length ^
No. 707288
&_& 17.50
F LIQUID INK.
For ink lines, water-soluble.
&
'_
4.90
5.80
H \]`\;
For reliable markings, blue.
Weight
No. 717296 ^=2& 2'"
8.20
J ;;`3<;`\3\
~Z;
Marking your tools
and workpieces
helps avoid misunderstandings.
With this set you
can easily mark
wood and nonhardened metal.
The knurled brass handle works with
spring-load, you do not need a hammer.
Simply insert a letter or number bit into
the hexagon socket and press down.
Letters are approx. 4 mm high.
Comes in plastic box.
No. 708324
&_2 20.90
Punch Awls
K \Z\`;`
Tool for making pilot holes to start long
nails. Forged, hardened steel blade with
a hilted tang. Red oak handle, ferruled
on both sides.
Overall length "
Drift length 150 mm
No. 717200
"^^ 34.90
L PUNCH AWL
Hardened stainless steel point, also for
marking. White oak handle.
Drift length 55 mm
Overall length 105 mm
No. 717205
_'
8.90
Drift length 75 mm
Overall length 140 mm
No. 717206
&&2' 13.90
M WIHA~`|\[=`;\3|
AWL
This tool features a semi-gloss lacquered
handle made of beech which looks good
and is comfortable to hold. The through
hardened blade is nickel-plated.
167
A
;`]
The professional fitting tool:
This revolutionary spring-loaded centre
punch allows you to pierce the centre
of bored screw holes for fittings such
as drawer pull-outs and hinges. When
you press the hammer button, the
hardened centering tip is punched into
the wood and retracted into its original
7
\
tip centres the tool in the bore hole or
the counterbore, allowing it to be used
in premounted cabinets without a good
G u ar an t e e
Workshop Knives
B
B 3\`|];|\\\
{;;={<;<;;
These hand-forged knives made of folded
Z$#^
%
notable for their exceptional edge life,
even when working with exotic hard 2`
Blade thickness @^
Overall length &2@&'
E \`|\{;;;`;Z
;?
#
7
#
&$
?2
HRC), pre-sharpened. The handle scales
of polished Makassar ebony are fastened
with sturdy brass rivets.
Blade length 70 mm
Overall length 180 mm
Bevel left
Blade width
I \~\;Z;~`];ZZ\|\ZZ
;`
;?
#
}
Finely ground, sintered carbide cutter
with unsurpassed lifetime means effortless glas cutting. Permanent lubrication
thanks to petroleum reservoir in handle.
Overall length &2
Head width 14 mm
No. 716155
_2 32.90
Blade width
^
2
&
15 mm
18 mm
No. 710505
No. 710504
No. 710502
No. 710506
No. 710501
^^^
^^^
^^^
^^^
&"
39.90
39.90
39.90
39.90
48.90
Bevel
double
right
left
C 3\`|];|\\\
STANDARD
#
7
#
^#
?
=
wear-resistant and easy to resharpen.
58 HRC.
Blade thickness @^
Overall length &2@&'
F ~];Z`<;`];
The prism-shaped blade of this scriber
knife allows scribing to the left or right of
a guide. The handle of oiled cherrywood
has a hollowed finger area close to the
nib for a better grip. Stick tang blade
2`Z7
7
left- and right-handed users.
Overall length 180 mm
Blade width 18 mm
No. 717113
&__ 15.20
Double bevel
J Z\~;\{;=~\Z=
[<\{;
Plastic scalpel handle
with an ergonomic shape
that ensures a good grip
and precise control. The
patented locking system allows blades
to be replaced easily while ensuring that
they sit firmly in the handle.
Overall length &2
No. 700450
&_2 25.90
&'
&'
&'
&'
&&^
12.90
12.90
12.90
12.90
13.60
Blade width
&' 12.90
&' 12.90
&&^ 13.60
Bevel left
Blade width
&^^ 16.10
&^^ 16.10
&2 17.40
K ~`;;\~]`Z\~;
Fits No. 700415 and No. 700450.
No. 700451
& 2.50
G
G HATTORIZ`<;`];
This handy scriber knife with prismshaped blade is ideal for universal scribing to the left or right of a guide. The
blade is hardened to 59 HRC and firmly
fastened to the round rosewood handle
with a stick tang. Suitable for both leftand right-handed users.
Overall length &2
Head width &2
No. 717102
'^ 9.90
2
D \\{3\`|];
;|\\\
Double-layered steel blade with hammered surface. Right bevel.
168
H ~`]|;`
For marking parallel lines and cutting
a precise groove for inlay strips. Two
parallel blades of two-layer steel.
Overall length 145 mm
Blade width @&
No. 717110
^^^ 39.90
Bevel right
Bevel left
L
O
L Z\~;\{;=Z\;ZZ
Z;;=[
<\{;
Strong, easy-care
stainless steel scalpel
handle with textured
shank. The patented locking system
allows blades to be replaced easily
while ensuring that they sit firmly in the
handle.
Overall length &2
No. 700415
&^_' 16.40
H
1
Blade width
N <;ZZ;]{|];[
~\Z\{;
Cult tools:
The high-grade
spring-loaded folding
mechanism that is free
of play, the quick bladerelease, the ergonomically shaped handle with belt clip and the
distinctive appearance are the hallmarks
of this knife. It can be used for cutting
wood, veneer, cardboard, leather, plastic
and flooring materials.
N
F
C
M <\{;Z]`Z\~;=
&#~;;Z;
The thin, 0.4- mm-thick blades made
from carbon-steel are extremely sharp
and cut wood, paper or plastic with little
effort. Fits No. 700415 and
No. 700450.
Model
1
2
3
4
5
Form 11
]
^
]
&
]
]
&
No. 700421
No. 700452
No. 700425
No. 700427
No. 700453
"2
"2
"2
"2
"2
5.90
5.90
5.90
5.90
5.90
2
O \~\;Z;`\]];
A sturdy craft knife does not necessarily
need to be expensive. This Japanese craft
?
^
thick blade of easy-to-sharpen carbon-steel
(SK5*) is mounted in a sturdy steel housing with a strong retention spring. The
generously dimensioned, natural bubinga
wood handle scales provide a secure grip
even under the toughest use. A stop prevents the blade from being damaged when
closing the knife. This knife is an essential
item for every workshop and offers reliability and longevity in outdoor activities.
* Hardness approx. 58 HRC, not rustproof.
Blade length 70 mm
Blade thickness ^
Overall length 195 mm
1 Curved Edge
For universal use.
No. 709045
&' 12.90
2 Straight Edge
For precision cuts, carving, pruning and
striping.
No. 709046
& 12.50
Drilling Tools
All around the drill!
169
Drilling Tools
Wood Drills
A
A \|;`<Z;=2#~;;Z;
Coiled wood drill bits for cutting clean
holes, with screw tips and spurs. Primarly
2#=
wooden case.
&&&&2&'
Overall length ^
No. 706023
^^^ 39.90
B \|;`<Z=~`;33\
High-quality wood drill bits for cutting
clean holes, with screw tips and spurs.
For use in either a brace or speed-controlled power drill.
Overall length ^
19 mm No. 717235
No. 706021
^ No. 706022
&^^ 15.50
&& 16.80
&2_ 19.90
C |\|;`<Z=~`;33\LITY
;?
#
7
spurs, for carpentry, log building (for inserting long dowels), pre-drilling wooden
mortises and making woodwind instruments. High quality, made in Japan.
Overall length 2
15 mm
^
D [{[Z{`Z='#~;;Z;
Primarily for drilling soft wood. With two
spurs, deep groove. Carbon-steel,
^2_'"&
Overall length 2@&^
No. 706049
_' 8.90
No. 717260
No. 717261
No. 717262
No. 717263
&_2
^&_
^__^
^2&
25.90
35.90
44.90
51.90
E <[{{`=2#~;;Z;
Bit wood drills with quick bit insert for
easy accessory change. The hexagonal
shaft prevents slippage, even during
impact. Suitable for drilling in hard and
soft wood as well as sheet materials.
Comes in a metal case.
^2'&
Overall length 2@&
No. 717448
"' 35.20
F [{[Z{`Z=ZZZ;;=
'#~;;Z;
Ten times the service life:
Made of heat-resistant, wear-resistant
HSS steel. Ideal for heavy-duty drilling
in hardwood. The edges last 10 times as
long as carbon-steel bits. Taper-ground
lips for perfectly clean boreholes.
^2_'"&
Overall length 2@&^
No. 706048
^' 65.90
3
J
H ~`;33\<`\{~
DRILL, LONG
These superior Long Brad Point Drills
are made of high-alloy tool steel. Due
to precision-ground protruding cutting
edges (stretched spiral), wood fibers get
cut before the hole is drilled. The long
Drill runs smoothly and withstands flexural stress. For exact drilling in hardwood
and softwood as well as sheet materials.
1 Diameter: 6 mm
No. 707362
&'_ 21.50
2 Diameter: 8 mm
No. 707363
& 28.70
3 Diameter: 10 mm
No. 707364
_^ 32.40
170
I
J ]`Z;`<Z;=&#~;;Z;
Forstner bits with conventional straight
I ~`;33\<[{{`= cutting edges. Primarly for drilling soft 2&&&2
#~;;Z;
^^^'
High-quality wood drill with hexagonal
shaft for fast bit changing in collets. The No. 706035
^&_ 35.90
hexagonal shape also prevents the shaft
from slipping in the case of impacts such
as when drilling into knots. Two spurs
When sharpening drill bits (or other
behind the centering tip separate the
tools with difficult geometry) it is a
wood fibres before the actual drilling and
good idea to blacken the surfaces to
thus allow drill holes with smooth sides
be ground with a waterproof felt-tip
even in fibrous softwoods.
pen. This allows you to see at a glance
Comes in plastic box.
which surfaces have already been
^2'
ground.
Overall length _@&&
No. 707409
^2&^ 43.00
G
G {`Z~Z=_#~;;Z;
Slide-on rings with locking
screws for wood and metal
drills. They serve as simple and
effective depth stops when dril^'2'"
&&&&_=
Allen key for locking screws.
No. 701879
2&^
7.30
Drilling Tools
A COLT 3\]`Z;`<Z
The Colt MaxiCut cutter head uses a
novel geometric design that combines
the advantages of both a Forstner and
a universal bit. Drilling half or diagonal
holes or drilling holes into extremely hard
woods, MDF boards, or veneer laminate sheets are no problem for the Colt
MaxiCut. Together with the self-cutting
centering tip, the chip breakers on the
main cutters reduce heat build up and
increase service life. These bits feature
the RotaStop function for quick release.
The idea behind RotaStop is to provide
the shank with a complex geometry that
makes not only for simple tool change
but also for optimal torque transmission
without slip.
Shaft diameter 10 mm
Cutting length 2
Overall length 90 mm
^
^
40 mm
45 mm
50 mm
No. 701890
No. 701891
No. 701892
No. 701893
No. 701894
No. 701895
^"
_2
^^_
^"'
&^
2_
28.50
32.90
40.10
46.50
61.20
67.50
RotaStop
B COLT ROTASTOP
;;ZZ
The RotaStop extensions
are precision-made for
Colt MaxiCut bits to
guarantee accurate
concentricity and prevent slippage. Only
fits Colt Forstner bits.
C COLT ROTASTOP
3`Z;\~;`\{\~;`Z
Use these adapters to clamp Colt Forstner bits directly into the lathe tailstock
or into the taper socket of the drill press.
The RotaStop extensions guarantee accurate concentricity and prevent slippage.
Overall length
3
3^
D FISCH[\;#;`]`Z;`<Z
Overall length 90 mm
Cutting length 2
8 mm
8 mm
8 mm
8 mm
10 mm
10 mm
10 mm
10 mm
10 mm
15 mm
^
^
40 mm
45 mm
50 mm
2
No. 707380
No. 707381
No. 707382
No. 707383
No. 707384
No. 707385
No. 707386
No. 707387
No. 707388
&2&^
&_"'
&_
2&
2_
^2_
^_2
&'
2_'
19.20
21.40
24.00
26.90
31.50
36.50
44.10
49.80
80.70
H
H ^{<
Drill bit and router cutter in one:
Looking like a Forstner bit at first sight,
this bit is a unique combination of cutting blades that allow it to also be moved
backwards and sideways to a limited
extent. The drill bit is stabilised by a
centering tip and the two main cutting
blades. Another major advantage of this
^_^ 44.30
52.90
Shaft diameter
No. 701899
No. 701898
2^"
E FISCH[\;#;`]`Z;`=
#~;;Z;
$&^^%=
^}
'?^=
^}
&?^
In beechwood case.
Cutting length 2
F FISCH[\;#;`]`Z;`=
Overall length 90 mm
&2#~;;Z;
No. 707389
_"'^ 95.00 $&&&2&'/
2'^^^'%=
G ;;Z]`]Z[\;#;` ^}
'?^=
^}
&?^
]`Z;`<
beechwood case.
With locking screws.
For shaft diameter
Cutting length 2
8 mm No. 707390 ^ 27.90 Overall length 90 mm
10 mm No. 707391 ^ 27.90 No. 707396
&&' 287.00
In comparison to
a standard round
shaft the Rotastop
shaft has a complex
geometric shape.
It interlocks in
connection with a
suitable counterpart (Rotastopsleeve)
;
when used in a standard drill chuck
it locks itself through to the gradient
transitions on the shaft.
7.60
I \{Z\<;
WOOD DRILL BIT
Wood drill bit for
brace, seamlessly
adjustable from
_2
via two sliding cutters.
Shaft suitable for three-jaw chuck.
Overall length &2
No. 707181
2^" 31.40
171
Drilling Tools
Metal Drills
C
A
A [Z{`Z=3;\=~`;33
\=&"#~;;Z;
Twist drills with cylindrical
shaft for steels, cast materials, hard and soft plastics,
non-ferrous metals as well
as wood. The blades are
shaped to make these drills
ideal for free-hand drilling,
even without pre-punching.
Crafted from HSS-steel for
a long service life. Set of
19 pieces in an ABS case,
1-10 mm in steps of 0.5 mm.
No. 717449
2&' 74.00
B
B <3;\{`Z=~`;33\=#~;;Z;
;
assortment of Metal Drills which feature
the most popular diameters. Due to hex
shank ideally suited for bit holders. Hex
@
tant feature for a metal drill. For superior
cutting performance, the cross-shaped
Drills are precision-ground.
^2'
Overall length 2@_
No. 707370
"&2 34.70
C |3~`~Z;
TWIST DRILLS
This multipurpose twist drill is a real problem solver. Through to the heat resistant
HSS-steel it can be used for a wide range
of materials. The drill has a parabolic flute design which provides good
swarf control. It can be used for many
materials such as iron and non-ferrous
metals, but also for wood and plastics.
In particular the drills are excellent for
riveting knife handles, which involves
precise drilling through often all kinds of
different materials.
^
^
4 mm
4.5 mm
5 mm
5.5 mm
2
No. 717450
No. 717451
No. 717452
No. 717453
No. 717454
No. 717455
No. 717456
'""
&
&"
&&'
&^2&
&_"
&2
Stone Drills
Masonry Drill Bits TX
Solid industrial-quality masonry drill
bits suitable for rotary and percussion
drilling. The high-temperature soldered
#
&^
is particularly suitable for extremely hard
materials such as concrete, tiles and ceramics. A specially shaped groove on the
head ensures an excellent penetration
rate and debris removal. Surface finish
burnished and cylindrically ground.
D 3\Z`{`<Z=
#~;;Z;
Comes in plastic case.
2'&
_#&
No. 717540
&2_ 12.70
E 3\Z`{`<Z=
_#~;;Z;
Comes in metal case.
?2'&&
Overall length 75 - 150 mm
No. 717545
" 24.90
Countersinks and
Countersink Drills
F ";`Z[<
{;`=_#~;;Z;
These HSS countersinks with three
blades are suited for steel as well as light
metal, for plastic as well as wood. The
hexagonal shaft allows safe clamping
without slippage and also insertion into
quick-change bit holders. Comes in a
$2^'^&&
&2%7
No. 707469
^ 59.90
H `ZZ;;`Z=
~`;33\
"
2#2`
are ideally suited for flawless countersinking. The crosshole provides excellent
chip clearance and prevents jamming
with the workpiece. The special edge
geometry of these outstanding Countersinks allows for chatter-free and burr-free
operations. Hex shank forms a reliable stop.
172
G ";`Z[<
{;`=~`;33\=
_#~;;Z;
For sinking countersunk head screws, for
countersinking and deburring boreholes
in wood, non-ferrous metals, alloyed,
^
ZZ
countersinks are chatter-free and stand
out for low heat build-up, excellent chip
ejection, and high-quality surface finish.
Six countersinks with hexagonal shaft
$2^'^&&&2
%
7
with quick-change chuck. Comes in a
sturdy metal case.
No. 707392
_^'_ 87.90
&"
&"
&_^
^&_
1 Crosshole Countersink
13.00
17.00
20.50
35.90
10.70
12.20
13.00
14.50
16.20
17.60
18.40
Drilling Tools
A \{Z\<;#
;`Z{`=\=
_#~;;Z;
The pre-drilling of wood
screws takes on a different
quality with this countersink
drill. Greater tensile strength
is achieved with the tapered
design than with cylinder
drills; at the same time the
risk of screw breakage is
reduced. The drilling depth
is exactly adjustable to the
borehole depth by means
of an adjusting ring. The
countersunk head is also
adjustable in depth, so that
a dowel can be inserted if
required (for invisible screw
joins). A steep and deep
groove prevents plugging
and overheating of the drill.
Manufactured in Japan from
wear-resistant HSS steel.
Set 7-pieces:
^^2'
2
Overall length '@&
No. 717327
___ 86.60
B ;`Z{`Z=#~;;Z;
Japanese precision tools for countersinking and capping wood screws. Made
of heat-proof, wear-resistant HSS steel,
hexagonal shaft.
C PILOT DRILL
With this pilot drill, you do not have to
change bits from drill to countersink
when drilling screw holes. You can set
the depth of the hole without countersink
to between 10 and 45 mm with a grub
8 mm
#
^
Overall length
No. 701871
_"' 33.30
10 mm
#
^
Overall length
No. 701872
"" 35.60
12 mm
Tapered pre-cutter 4 mm
Overall length
No. 701969
^^^ 39.90
D \|;`|3;Z=_#~;;Z;
Also for children:
These hand-drills are popular with
everybody, not only the nostagicallyinclined. They are light, the drill pulls
itself into the wood due to the tapered
screw tip and the deep grove guarantees good chip removal. In addition,
their slightly tapered shape leads to
greater tensile strength of screw joints.
^^
No. 701884
_" 9.40
E \~\;Z;`;~\`Z;
This precision conical
drill and dowel cutter
set can be used to
repair loose or
unsightly knots and
other defects in a
clean and efficient
manner. Conical
dowels can be fitted
Knot removing
more tightly than
cylindrical dowels
and do not diminish
the strength of the
piece when glued
Dowel cutting
in place.
We recommend
using a Japanese
flushcutting saw
$ _&^&%
for cutting off the
tops of the dowels.
#=
drill length 80 mm,
Dowel inserting
HSS drill bit, aluminium dowel cutter,
resharpenable carbonsteel cutter. With
wooden case
and instruction
booklet.
Flush cutting
No. 717255
Replacement blade
No. 717256
F ;`\Z{[;\{`{;`
This practical tool is
used for producing
precisely rounded
rods and dowels from
square stock. Using a
hand drill and
adapter, the squareshaped wood is
driven through the
dowel cutter, which
is attached to the
workbench. For short
pieces and for cutting tenons, the dowel
cutter can also be turned by hand on a
firmly clamped workpiece. The curved
blade facilitates clean and easy cutting,
and by adjusting the blade the diameter
7
#
2
mm. Aluminium body.
Overall length 2
I {`\\{\~;`;{~|Z
;`Z='#~;;Z;
For making wooden dowels and plugs for
sealing boreholes, restoring knots, etc.
The tapered cutters facilitate a seamless
tight fit.
K ;`\Z\~;`;{{`<
When clamped in a brace with 4-jaw
chuck, this drill bit conically enlarges
cylindrical holes. For boreholes with a
&&#^[
&'=
cone cutter
_&''#'
Overall length &
Taper diameter '2
No. 701867
"^^ 34.90
Replacement blade
No. 701868
2 7.20
mm inch
L
J
G \{\~;`]`;`\Z
{[;;`
G
]
#>
&^
] _2"2
No. 706966
"
3.50
&'' 129.50
J \~;`;{{[;;`Z
For cutting slightly conical
wooden dowels for closing drill
=?&
&^ 29.90
H
H {`;Z\]]`\{\~;`
] _2"22 _2"2_
No. 706968
&2 1.90
2
8 mm
10 mm
&
&2
No. 701860
No. 701861
No. 701862
No. 701863
No. 701864
2
2
2^"
_2
__^
6.50
7.20
7.60
8.40
9.20
L ;`\Z;;`
For cutting conical ends on cylindrical
rods, e.g. Windsor chair legs, rungs, etc.
&'=77
2^ =
7 $2`%=7
Suitable tapered drill bit
_&'2_
Cone end 15.9 mm (5/8), max. rod
?'
No. 701882
' 23.90
Replacement cutter
No. 701883
^2& 4.30
173
Drilling Tools
A \~;`;{Z~<
For making cylindrical holes conical and
for drilling skewed
angle conical holes for
chair legs, arm rests,
etc. Taper 1/4.5
Overall length 175 mm
Taper diameter &
^
No. 706999
61.90
B `{|~\;=
^#~;;Z;
For quick and easy
cutting of short cylindrical rods or tenons
from round or square stock. Carbon steel
=
7=
&
&'
No. 707211
^ 28.60
^`7
No. 707212
&&"^ 14.20
C {3|~\;#Z;=
^~;;Z
For rounding the heads
&&'
No. 707213
30.40
^`7
No. 707214
&&"^ 14.20
F |{;<Z|Z\{Z\`;Z;Z]`;`\Z
{[;`{;`
E
E ;`\Z {[;`{;`
An ingenious tool which lets you make
perfectly sized dowel rods from square
timber.
D ~;`~\;
For sharpening the ends
of cylindrical rods. Max.
No. 707215
&"2 17.80
Replacement blade
No. 707216
2 5.50
mm
inch
2^
7.9 + 9.5
&&&&_
&^&"
17.5 + 19
2
1/4
&2^'
_&2&
"&2'
&&&2^
&^&2_'
No. 703658
No. 703659
No. 703660
No. 703661
No. 703662
No. 703663
^_2
^"^^
^"^^
^"'^
^"'^
&"^
44.80
46.80
46.80
47.40
47.40
49.90
G ;`\Z;;`=`{;{Z{;`Z
The mortise and tenon joint is a sturdy wood joint ideal
for making chair legs,
rungs, frames and other
structures. With rustic
and green wood furniture they allow elegant,
glue-free construction
of high durability.
Driven by an electric
drill or brace (with
brace adapter), these Veritas cutters produce smooth
precision-cut tenons with rounded shoulders. Well-balanced, anodized aluminium body with a high-performance
tool-steel cutter. A built-in spirit level facilitates in-line
3?
?2'=?
shaft 8 mm.
Tenon diameter
=\#
$
#
#
%de bushings as well as a square socket
drive with power drill adaptor. Basic set
$&%
No. 703657
" 249.00
Replacement blade (pre-cut)
No. 703664
&_' 20.80
Replacement blade (post-cut)
No. 703665
&" 22.90
Tip:
Mortise joints tighten themselves if
the timber moisture content of the tenon is lower than that of the counterpiece with the mortise hole when it is
fitted (green wood carpentry).
174
5/8 inch
&2
^
19 mm
1 inch
1 1/4 inch ^
&& ^'
50 mm
Replacement blade
H {`\;;`Z=#~;;Z;
Double function Tenon and disc
cutter:
Powerful pilot hole drill for cutting
cylindrical tenons for mortise jointing as well as for making wooden
dowels up to 70mm in length. 5 pieces in a wooden case,
7 &&&2
No. 701870
'_ 69.90
I
I \{\~;`]`;`\Z;;`
With rectangular shaft for mounting in a brace.
] _2"'#'
No. 706992
_2
8.40
Drilling Tools
B [{`;\{|Z=#~;;Z;
For making practical wooden threads with a virtually unlimited number of applications for making furniture, racks, toys, nutcrackers, lamps etc. Two-piece set (thread
box and tap), for cutting internal and external threads. Tap made of hardened tool
steel, hardwood thread box with a removable hardened steel cutter. The pitch of
screw thread is given per inch. Suitable dowel rods (
'^&&#%
Rod mm inch
Pitch
&
&
8
19
^
2
1
2
^
1 1/4
2
^'
&&
2
Replacement cutter
No. 707185
No. 707186
No. 707187
No. 707188
No. 707189
No. 707195
^2&
"2
2"_
'
"&2
51.90
53.50
55.90
60.50
64.90
10.90
Male threads are cut more easily and cleanly if the wooden rods are first laid in
linseed oil. Also make sure that hardwood blocks are well dried out and that your
cutting edge is sharp.
A \~\;Z;`;;`
The inside and outside cutters ensure
clean results even in thin or fibrous ma
\7
^ &
mm, with an additional arm for holes
^`
7ZZ
7=
'$2
if cutting from both sides). Driven by a
controllable-speed drill. With instruction
booklet.
Please note: Additional arms are not
included. They have to be ordered
separatley.
No. 716165
^&' 37.90
`
No. 716166
&&& 13.10
Additional arm, max
No. 716167
2 7.40
Additional arm, max ^
No. 716168
"" 11.80
C [{[Z{`Z=ZZ#Z;;
Made of heat-resistant, wear-resistant HSS steel. Ideal for heavy-duty drilling in
hardwood. The edges last 10 times as long as carbon-steel bits. Taper-ground lips
for perfectly clean boreholes. Sizes fit pilot hole diameter of the wood threading tool
707185.
9 mm
&
No. 706046
&&2 13.40
D <`3\]`Z;`<
High-quality Forstner bit for softwood, hardwood and panel materials. The wave-form
>
=
;
Z
__&'2#__&'"
Overall length 90 mm
Cutting length 57 mm
15 mm
&
_
^^
19 mm
^
^'
No. 706195
No. 706196
No. 706197
No. 706198
&_2
2&
'"
^&2
20.90
26.90
33.90
37.20
E <`\;
If there is no power supply or you have
to bore extremely delicate holes, it is advisable to use a brace. This French model
works extremely smoothly due to the
ball-bearing mounting of its head. The
chuck has a right-left adjustable ratchet,
which enables drilling and screwing even
in confined spaces.
F \{{`[<`;\Z~\;
Hand-driven drill. Two speeds by interchanging the crank and side handle.
Closed housing of diecast aluminium,
hardwood handles, three-jaw chuck (diameter max. 10 mm). Made in Germany.
Overall length ^2
Weight &^
No. 717251
2 78.00
175
Drilling Tools
A ~`;Z{`Z;=_#~;;Z;
Japanese auger bit for drilling
precise, smooth and tear-free
holes in wood. Double bevel
bits with pre-cutters and fine
screw points. Hard chromeplated tool steel (rustproof).
7^
2'= 7
2=
7
^ =
with hexagonal shafts. Set, hand brace
7^@ 8 mm.
Overall length ^
Weight 100 g
No. 717250
^'_ 45.90
B HAND DRILL
Small hand drill with bevel gear drive,
made in Germany. Hardwood handle,
fast-action chuck ( max. 8 mm).
Overall length "
Weight 570 g
No. 717249
2_ 31.50
C
C DRILL STAND WITH CHUCK
Thanks to the integrated geared-rim
chuck, this drill stand is ideal for use
with cordless screwdrivers.
176
D KANZAWA\|;{`;\{
"#
in corners and in
conditions where
space is limited
(distance to wall min.
%
7^
different positions.
Aluminium housing,
77
=^#&#
10 mm, hexagonal drive shaft 8 mm.
Includes key
&_?^2?2
Weight 500 g
No. 717212
&"^ 49.90
E ~#;|\~[{`
;
This cap reliably
collects dust and chips,
"
guide for drilling. With
its large diameter, the
cap is ideal for use
with hole cutters, when
working overhead,
on walls or on desks.
The spring-loaded
drill collet can be driven with a cordless
screwdriver. Lip seal at the bottom edge
of the cap. Inner cap diameter 195 mm.
Max. tool length without shaft 95 mm.
Spindle travel 40 mm.
No. 716179
_^_ 88.50
Screwdrivers
and Pliers
Trust them for reliability and precision!
Screwdrivers | 180
Pliers | 181
177
A DICKZ`;[\{{[;\Z;=
_#~;;Z;
Prepared for any situation:
Does this sound familiar? Whether
assembling furniture, installing lamps or
fitting curtain rods, often you are missing
a specific screw or you can not find the
matching dowel. To offer a solution for
any situation without having to buy each
screw individually or in large quantities,
we have put together a selection of the
most common screws and matching
dowels. The label on the case lid tells
you which screw is the right one for the
individual dowels and for which situa ^^??2
The set includes: Plastic case; countersunk screws, 50 pieces each (Phillips
%}^?^?^^?^^
??^???
2?_?26]
=
}?^2?^
Z'?]2?^
No. 718945
64.90
Schrder-Standard-Bit-Sets
With this tool set you can handle any standard screw. Durable bits for
machine or manual operation (58 @2`%Z7
magnetic holder in a handy plastic box.
C
C Z`{;`<Z;~\Z
<=&#~;;Z;
Z7
in a handy plastic box.
Specifications ~&?^=~&?/
^=&&??_^=
? 2
No. 707401
&2_ 19.90
B
B Z`{;`<Z;3;\<=
^&#~;;Z;
Z
2^
$&%^7 7 ?
Specifications ~?&??^=~
?&??^=&&
^=? =^
2'=]^==2='
No. 707400
^^^ 39.90
D WIHAZ\{\`{<#Z;=`
The bits are delivered in a box made of
impact-resistant plastic material which
may be opened one-handed.
With Bitholder.
1 Bit-Set, Torx
Specifications _'"&&
_^
No. 717866
&" 18.20
2 Bit-Set, PH, PZ, Torx
Specifications ~&^=~&^=
&^
No. 717856
&" 17.00
E
E WIHA<Z=&&#~;;Z;
;?
#
<$2@2^`%
;7
in wood. When screws get turned into
wood, the bit and screw head are under
increasing torsional stress. This torsional
stress gets perfectly absorbed. The bits
are delivered in a box made of impactresistant plastic material which may be
opened one-handed. Slotted, Philips and
Pozidriv Bits with Bitholder. The goldcoloured coating functions as a corrosion
prevention and helps to identify the bits.
Specifications ~&?^=
~&?^=]2
No. 717857
&2^ 18.60
178
2
F
F WIHA<Z=&&#~;;Z;
;?
7}
#
>$2&@2`%=
ideal for tightening screws in hard metals. When you fasten screws in a thread,
the load on the bit increases abruptly
when the screw touches the workpiece.
To accommodate these rapidly increasing
torsion forces, the bit is tough-hard. The
necessary wear-resistance is achieved
through special heat treatment. These
bits come in a high-impact plastic box
that can be handled with one hand.
Flat-blade, Phillips and Pozidriv bits with
bit holder.
Specifications ~&?^=
~&?^=]2
No. 717849
&2&^ 19.20
G ];<;Z\]
Made in Japan by the market leader
in automotive tools, this flexible shaft
can be used with both normal cordless screwdrivers and cordless impact
\^^ =
?7#
le bit holder is ideal for inaccessible
spots, whether in the engine compartment or when assembling furniture or
wooden structures. You simply bend the
shaft into the optimum working position
at the front hand rest and hold it by this
rest. Thanks to a quick-change fastener,
the bit is locked securely in place.
#~7
Overall length ^^
No. 717216
^&_ 35.90
H ;`Z\<{;`=Z\;ZZ
Z;;
Simple bit holders with stainless steel
H
sleeve and strong magnetic function.
Overall length 2
10 mm
No. 717491
^2& 4.30
I [;`\`\~{\~`;`Z\<
{;`
These three points sum up the advantages of the Rapidaptor bit holder: Simple
bit insertion and retention at the same
time, convenient bit release by pushing
the sleeve forward as well as free turning
of the sleeve for easy application of the
screw.
Overall length 50 mm
15 mm
No. 717562
&&2' 13.90
Z
#
$
?
-
slipping through.
Torx screw
Allen screw
not strong enough, it might slip and oscillate, is more widely used for manual screwing,
which could also damage screw and bit.
A
A [;`\<`\;
Robust technology meets stylish design:
This drop-forged bit ratchet not only provides a comfortable grip, but its compact
design means you can work quickly even
in confined spaces. With its fine-toothed
ratchet mechanism, it transmits torques
2
B
B [;`\ KRAFTFORM KOMPAKT RAT;Z`;[{`;`=&_#~;;Z;
\
}[
dy yet smooth ratchet mechanism makes
it possible to fasten or loosen screws without releasing the tool.
The hexagonal reverse
direction switch made
from robust, diecast
zinc alloys prevents the
tool from rolling on the
work top and allows
for easy switching.
Torques of up to 50
Nm can be transmitted
in both directions, with
an additional center
position for making
fine adjustments. Bits
C WIHA<#Z`;[{`;`
This innovative bit holder with fold-out
slotted (5.5 and
2%2~lips head bits (1
?~&=^?~=
?~^%[
SoftFinish handle
for a secure grip.
The bit collet is
made of stainless
steel and features
a strong permanent magnet. Blade of
through-hardened chromium-vanadium
steel.
Overall length
No. 717851
"2 29.70
179
Screwdrivers
A \;~;`
Z`;[{`;`Z=]\;\{
B \;~;`
Z`;[{`;`Z=~
PH 1
Blade length 75 mm
Overall length 180 mm
No. 717803
'^
Flat Head 6 mm
Blade thickness 0.8 mm
Blade length 100 mm
Overall length
No. 717801
& 11.90
Flat Head 8 mm
Blade thickness 1.0 mm
Blade length 150 mm
Overall length '
No. 717802
&^^2 15.90
D `\;Z`;[{`;`
For decades this tool has proven itself a
classic, equally valued in boat construction and for assembly and restoration tasks. Screws can be inserted and
removed rapidly, even in tight spaces.
The chuck can be switched to the left or
right and locked. Hardened and smoothly
operating rotating mechanism with a
long service life, varnished beech handle.
^7
{_^
(flat and Phillips
head).
Overall length
480 mm
No. 707130
&2 49.50
C [{;Z`;[{`;`Z=
#~;;Z;
With a full-length blade made from a
chromium-molybdenum-vanadium alloy,
these screwdrivers can resist even the
strongest forces. A forged-on hexagon
allows you to use a spanner for effective
force transmission. The curved beech
handle provides a non-slip grip, has a
roll-off guard where it meets the hoop
and a leather splinter-protection cap at
the end of the handle. Magnetised tips.
]_"~&~
Overall length &'@_
No. 717814
^^2 27.80
G \{Z\<;`\;|[`;
This adjustable wrench can be used
similarly to a ratchet. The patented
design features a fixed jaw with a steel
roller which locks in the direction of the
applied force but moves in the other di-
180
9.90
9.90
PH 2
Blade length 100 mm
Overall length
No. 717804
& 11.90
PH 3
Blade length 150 mm
Overall length '
No. 717805
&^^2 15.90
E
E <\{\~;`]``\;
Z`;[{`;`
Since the ratchet screwdriver only
accommodates special bits (according to
{_^%=
mended accessory. It allows the use of
72^
? 73=_?2
No. 707129
_' 9.30
F \{Z\<;[`;=3
Small adjustable wrench of chrome vanadium steel, hardened jaws, rubber-coated
handle.
Opening 17 mm
Overall length 110 mm
Weight 2
No. 717838
& 16.90
Pliers
Keiba Pliers
Japanese precision pliers:
Axial and radial
bronze bearings
help give Keiba
pliers an exceptionally smooth
action and make
Bronze bearing
them practically
non-wearing*.
They are also bounce-free, for
example when cutting hard wire.
Forged from extrahard Hitachi
steel, working surfaces hardened
2`=
napped elastomer.
* In endurance tests, no measurable wear was determined, even
after 100,000 opening and closing
actions.
A ;<\3<\~;`Z
With wire cutters.
Overall length 175 mm
Weight
No. 717815
"^^ 34.90
B ;<\]\#`{~;`Z
;?
=
Overall length 150 mm
Weight &^
No. 717816
^ 28.60
C
C ;<\{\|\;`
With stripper.
Overall length 150 mm
Weight 180 g
No. 717817
&^ 29.90
MTC Pliers
These high-grade Japanese pliers
have a sensitive action but are also
suitable for heavy-duty work. Made
from the highest quality Hitachi
steels, well-proportioned, carefully
hardened, individually inspected
and adjusted.
D MTC\]#`{~;`Z
;?
[
=
serrated jaws, spring-loaded handle.
Overall length 150 mm
Weight 70 g
No. 717826
&&& 13.70
E MTC~`;Z~;`Z
Precision pliers for removing nails, pins
and staples. The rolling action of the
extra-wide rounded head minimises
pressure on the underlying surface, thus
protecting the work piece.
Jaw width
Overall length 150 mm
Weight
No. 717808
&'2 15.30
F MTC[`;;`Z
For severing steel wires and nails up to
^
#
cutting action of the head reduces the
burr that forms during cutting.
Overall length
Weight ^
No. 717830
&_^& 20.60
Knipex Pliers
Knipex pliers have been manufactured in Wuppertal, Germany, for
&^
sing quality and continuing further
development make the company
the worlds leading pliers manufacturer.
G ~;\`~;;`Z~;`Z
High-quality carpenters pincers for
heavy-duty use. The body is atramentised (galvanic phosphate coating) for
protection against corrosion. Handle ends
plastic-coated.
Jaw width ^
Overall length 180 mm
Weight ^
No. 717162
&&_ 12.10
H
H ~; COBRA[\;`~3~
~;`Z
High-tech water pump pliers that can
be adjusted directly on the workpiece
at the touch of a button. The gripping
2&`
the specially selected hard-wearing material ensuring a lasting secure grip. The
hinge bolt catches securely and precisely,
preventing unintentional shifting. Body
grey atramentised (galvanic phosphate
coating), handles coated in plastic for a
#
${
%
Overall length 180 mm
Weight 170 g
No. 717164
&"_ 23.50
I
J
I ~;{\|\;`
This diagonal cutter with induction-har7$2`%
hard and soft wires, ensuring a clean cut
even with fine copper wires. Slim head
for use in confined spaces. High-quality
multi-component handles.
Overall length 180 mm
Weight
No. 717163
' 23.90
J ~;3<\~;`Z
Combination pliers for gripping flat and
round material and cutting wire. The
cutting edges on the chrome-plated
#
2`
High-quality ergonomic multi-component
handles.
Overall length 180 mm
Weight
No. 717161
&_& 18.70
181
A Z]~~;~;`Z
With round jaws ( to approx. 70
Overall length _
Weight 440 g
No. 717829
^2"
Replacement Jaws Round
No. 800324
_"'
Replacement Jaws V-shaped
No. 800325
_"'
9.50
B Z][\;`~~;~;`Z
The perfect pliers for gently gripping
copper, plastic or stainless steel pipes.
Opening 2@
Overall length
Weight ^&
No. 717836
^ 27.90
Replacement Jaws
No. 717837
" 3.50
D ;`{Z\~;#|Z~Z
Standard tin snips for short straight cuts
and contour cuts with a wide radius
to the left and right. Cutting edges
with micro-serrations to avoid slipping.
;
multi-component
handle. Cuts steel
&
mm and stainless
steel sheets up to
0.7 mm.
Jaw length 44 mm
Overall length
Weight ^'
No. 717701
& 16.90
7\
practical locking mechanism - which
also limits the maximum opening - and
the multi-component handle allow you to
work without fatigue. Cuts steel sheets
&
up to 0.7 mm.
Jaw length
Overall length 180 mm
Weight
No. 717702
&'' 18.90
mm).
38.90
9.50
C SOFT TOUCH
3<\~;`Z
With wire cutter.
Overall length 150 mm
Weight 175 g
No. 717824
& 14.90
Replacement Jaws
No. 800323
" 3.50
G Z`;[#`;3|~;`Z
Specially designed
Japanese pliers for
unscrewing tight
screws with a
damaged head or slot.
The sharp-toothed
grooves at the ends
of the inner jaws
allow you to grip and
twist round-head and
cylinder-head screws
close to the flange. Also useful for blocked and corroded steel screws or screws
with unusually shaped slots.
182
F
F ;`{{;\Z~Z
Professional tin snips with leverage
for straight and outline cutting. The
optimised leverage ratio reduces cutting
7
manoeuvrability and the innovative
blade geometry ensures non-slip cutting.
;
#
&
steel sheets up to 0.7 mm.
Jaw length ^^
Overall length 2
Weight 480 g
No. 717700
^__^ 44.90
Clamps
Binding together!
Solid Steel Bar Clamps and Cast Iron Screw Clamps | 184
183
Clamps
1
2
3
A Z{Z;;<\`\3~Z
Thanks to the all-steel arms, these clamps are designed for flexible,
elastic clamping (metal and wood) and guarantee high strength at a
low weight. They have also been proven as industrial clamps for the
fixation of welding parts. The galvanised fixed arm and the clamping
pad are forged from a single piece. The burnished trapezoidal spindle
runs precisely in the guide and allows delicate clamping. Ball-jointed
clamping pad. Wooden handle.
Jaw depth
1 50 mm
50 mm
2 2
3 80 mm
4 100 mm
5 &
4
5
100 mm
^
&
&2
^
^
500 g
900 g
&
No. 705632
No. 705633
No. 705634
No. 705635
No. 705636
No. 705637
'_
&"
&
&'2
&_^
&&
10.20
12.60
12.20
15.30
20.50
25.60
B
B <;ZZ;3\;\<;\Z`Z`;[\3~Z
Unbending:
This clamp stays rigid, even at a high
tightening torque, and does not slacken.
The robust, hardened, hollow profile bar
with ribbing and corrugated malleable
cast-iron clamp arms are designed for
2\
in the sliding arm, which grips into the
ribbing of the bar, offers maximum
security against loosening and slippage.
Ball-jointed swivel pad (as of 80 mm
jaw depth pads can be replaced without
tools), strong trapezoid thread, beechwood handle.
Jaw depth
50 mm
100 mm
&
&
100 mm
500 mm
1000 mm
2
1100 g
'
No. 705713
No. 705714
No. 705715
No. 705716
&&&
'_
^2"_
22
C <;ZZ;~`;;Z`~Z=
#~;;Z;
To protect the surface of the clamped ob
=7
=7
__&^@__&
No. 705790
' 6.90
13.70
29.60
44.00
55.50
D <;ZZ;;{|;\3~{;;
Attachment for securing edging, trim,
veneers, etc. Can be
used with most standard screw clamps
with a maximum bar
&^
Spindle length 75 mm.
Weight ^
No. 705793
& 14.30
#;
E ;{|;\3~
Z ^#
gluing edges and other
rectangular joints.
Forged steel clamp arm,
zinc-plated.
Jaw opening 2?2
Weight 580 g
No. 705943
&&^ 18.00
184
F C-CLAMPS
These clamps are made of a special alloy
steel and achieve the highest clamping
forces up to 15.000 N thanks to their
C-shaped forged arm. The burnished spindle
with tommy bar turns smoothly and precisely.
Steel arm with nickel plating, ball-jointed
clamping pad.
Jaw depth
50 mm
50 mm
2
50 mm
75 mm
100 mm
^
2^
950 g
No. 705640
No. 705641
No. 705642
&'"" 22.60
&& 25.60
_^" 32.60
Clamps
A
1
8
A ;`{3`;~\`\3~Z
Lightweight,
precision clamps
for repairing musical
instruments and
other fine handcrafted objects.
Hand-forged steel
frame with galvanised surfaces.
Fast-action brass screw with
ball-jointed swivel rubber
coated pad andknurled
knob. To protect varnished
surfaces, special silicone
pads are available as
accessories.
1
2
3
4
5
6
7
8
9
10
Jaw depth
Silicone Pad
_
40 mm
90 mm
85 mm
&^
50 mm
150 mm
^
&
15 mm
^
^
40 mm
40 mm
40 mm
80 mm
80 mm
80 mm
&
&
15 mm
15 mm
17 mm
17 mm
17 mm
17 mm
17 mm
17 mm
11 g
18 g
^
75 g
115 g
170 g
^
105 g
_
Nr. 735719
Nr. 735718
Nr. 735714
Nr. 735715
Nr. 735702
Nr. 735704
Nr. 735707
Nr. 735709
Nr. 735711
Nr. 735713
10
&22
&_&
&_"
&""
^_
&^
"^^
2
^&'
19.80
20.40
21.30
23.70
28.20
29.90
34.90
31.20
38.30
47.90
B
B Z;~`;;~\{Z]`
;`{3`;~\`\3~Z
High-quality soft silicone pads that are
pulled over the hard rubber plates of the
repair clamps to optimally protect even
the most sensitive varnished surfaces
from marring.
& No. 820068 & 2.50
15 mm No. 820067 2.90
17 mm No. 820066 '2 3.40
One-Hand Clamps
C #;;`\3~Z
The advanced version of the all-steel
clamp for fast, vibration-resistant clamping, thanks to a plastic-coated, non-slip
ratchet-type lever. Galvanised fixed arm
and clamping pad forged from a single
piece. Precisely made, wear-resistant
catch mechanism for controlled clamping
force.
Jaw depth 140 mm
Weight &&2^
D <;ZZ; KLIKLAMP
Preserves your workpiece:
The clamp arms of ultra-light magnesium
can be quickly set to the exact amount
of clamping pressure desired using the
ratchet lever. Their exceptionally light
Jaw opening
E
F
Spreading mode
Jaw depth 85 mm
Weight 2__'& g
Jaw opening
___&=___=___
No. 705770
2'& 31.90
F 3;#\{;{\3~
The ideal clamp for lightweight objects
that need to be bonded quickly, for example in model and instrument making.
Adjustable with one hand, rubber-coated
jaws, quick release.
Jaw depth ^
Jaw opening &
Weight 90 g
No. 705951
2 7.20
185
Clamps
A ;33Z\ CLAMPS
The original from Germany:
Light, fast-acting clamps. The clamping pressure can be regulated
via a cam lever. Cork pads protect the surface of the work piece. One
movable clamp arm. Zinc-plated steel bar with hornbeam jaws.
Jaw depth
Jaw opening
Weight
110 mm
110 mm
110 mm
110 mm
150 mm
400 mm
2
800 mm
440 g
2&
780 g
915 g
500 g
^
No. 705810
No. 705823
No. 705812
No. 705824
No. 705825
No. 705811
'22
&
&
&^_'
&"
&^_'
10.30
12.20
14.30
16.40
15.40
16.40
;33Z\\3~={\3\<;\[Z
Jaw depth
Jaw opening
Weight
110 mm
&
&2
No. 705818
&'" 22.00
3
C GORILLA CLAMPS
These inexpensive gluing clamps guarantee powerful clamping pressure, yet are
extremely lightweight. Their swivel jaws
adjust to the contours of the workpiece,
while their fibre-reinforced arms withstand heavy-duty use.
Jaw depth
&^
&2
&
1.70
1.90
2.50
D ~\`\;\3~Z
The wooden jaws of these practical clamps can close at a variety of angles. Clamping
pressure is distributed evenly without torsion. Screws made of galvanised steel, jaws
and handles of maple.
1
2
3
4
Jaw depth
Jaw opening
Weight
55 mm
80 mm
105 mm
&^
2
80 mm
&^
180 mm
180 g
410 g
850 g
1080 g
No. 705871
No. 705872
No. 705873
No. 705874
"2 5.90
"_ 7.10
_"' 9.50
"22 11.50
Tip:
To quickly open
parallel clamps, hold
the handles with
both hands and turn
them as you would a
crank.
Mitre Clamps
E
G `;~\;3;<`\;Z=#~;;Z;
Fits Spring Mitre Bracket Set No. 705741.
Distance between centres
15 mm
^
45 mm
55 mm
&@
@^
^@
@2
186
No. 705742
No. 705743
No. 705744
No. 705745
'2
^^
^^2
^^2
3.40
3.60
4.00
4.00
Jaw depth 95 mm
Weight'
^2
Jaw opening
F Z~`|3`;<`\;ZZ;3
Lightweight spring brackets for quick
and easy assembly of frames and other
wooden constructions. Only one hand is
required to operate the mitre pliers, so
the other hand remains free for the work
piece. Protective covers can be applied
to the pointed ends
when working with
sensitive surfaces.
Brackets of hardened
(x)
spring steel.
Set includes 4 clamps.
Distance between
centres 45 mm
For moulding width (x) ^@
No. 705741
&2_ 19.90
H ~`;;;`Z=#~;;Z;
Fits Spring Mitre Bracket Set No.
705741.
No. 705746
&' 2.20
Clamps
A ~`;Z3`;\3~
Heavy-duty vice for precise rectangular
jointing, working and gluing frames and
other profiles. The vice can be turned
^2 7= "
locked into every position. The central
saw slot allows work to be done while
the piece is clamped into position. Four
holes in the base for securing the vice to
a workbench. Made of cast iron.
Jaw opening 100 mm
Weight 4800 g
No. 705769
2^^ 75.00
1 Pony No. 50
Crank handle.
Jaw depth
Spindle length 50 mm
No. 705954
&^ 25.50
2 Pony No. 56
Reversible heads for use as a spreader,
winged-screw.
Jaw depth 2
Spindle length 50 mm
No. 705944
^" 28.50
C PONY\3~]`;Z\{{;Z=
#~;;Z;
For making a variety of clamping jigs.
Aluminium, with fixing screw and mounting hole.
No. 705909
& 16.90
Weight
2&
910 mm
&
1050 g
1400 g
1800 g
No. 705940
No. 705941
No. 705942
&&' 49.00
52.90
^ 59.90
E \3~]`;Z
Robust quality at a low price:
Heavy-duty clamp fixtures for mounting
7
>
7
Z#}
head and tail castings.
Jaws 40 x 50 mm
Spindle length 110 mm
No. 705950
'2 27.20
F ;\{#<;\3<\`\3~
Sometimes you need a pressure reserve,
e.g. when gluing door frames, staircases
or thick panels. With its rigid I-profile,
powerful trapezoid thread and robust
hand crank this door clamp is a match
for the most difficult challenges. I-profile
'??
Jaw opening &
Weight 14.5 kg
Jaws 55 x 85 mm
Spindle length 150 mm
No. 705827
'" 95.90
187
Clamps
B <;ZZ;Z~\;`Z=~;;Z
Compact spacers for laying floating laminate and prefinished hardwood floors.
_"'
9.50
C
C ~\`;\3~
If you want to lay parquet or floorboards
without visible joins, our parquet clamp
is the right tool for you. It consists of two
robust angle profiles. One is attached to
the already fixed board, while the other
Tape Tensioners
D <;ZZ;\~;;Z;`[
\`\|;Z
Multi-angular structures, cylinders and
irregular workpieces are very difficult to
glue using clamps; these usually require
complex support structures. In such
cases you are better served with a tape
tensioner: You place the tape, made
of tear-resistant polyester, around the
workpiece and tension it seamlessly. The
second application for this tool is in the
gluing of frames cut to mitre.
E \~;;Z;`
This band clamp allows you to clamp round and
irregular shapes. The strong linen band locks
itself in the roller guides and can be fitted
to the workpiece from both sides. The
final tension is set via the handle of
the trapezoid spindle.
Tape width 50 mm
Band length 2&
No. 705656
'^&" 99.00
F MULTI-CLIP
Bonding, pressing and securing:
Patented traction clamp for securing
wooden parts for assembly or gluing,
bundling cables, rods or wires, securing
ladders, posts or pipes, etc.
188
Workbenches | 191
189
Tool Sets
Tool Carriers
For your tools ready at hand and a clear work-space: DICK tool carriers
make sure your workshop is tidy and with their mix of design and functio=
?
;
has its own place where it is safe and will not be damaged. When away
on an installation job, you will profit from having a light-weight selection
of tools at hand to carry out virtually any type of job. The stable tool
carriers made of glue-laminated beech plywood are exclusively manufactured in Germany according to our company guidelines and quality
standards. This practical tool carrier will simplify installation jobs and be
A ZZ\;` WITH
TOOL
\``;`\<;#3\|=;``[`=;~;{=;3Z
Price advantage
B
\``;`\<;#
3\|=;``[`=;~;{=
^;3Z Price advantage
;>
_&''&^3
2 partments for small items.
Weight 11 kg
No. 718812
2"& 749.00
A/B
C Z~~;3;\`Z;
Z~;\=&";3Z Price advantage
For DICK Tool Carrier Cabinet-Making
\
[
_&''&\Z
Z _&''&^
can be equipped with all additional tools
next to the basic tool set.
D ZZ\;` WITH
TOOL
\``;`\<;#3\|=;``
WORK
]
2
small items.
Weight 4.7 kg
No. 718811
&& 149.00
190
E
\``;`\<;#
3\|=;``[`=[
;Z
]
2
small items.
Weight 2
No. 718810
'^&" 99.00
\~\;Z;Z;`
Price advantage
Workbenches
B Z\|`Z;
The traditional shaving horse is an
indispensable tool when working with
drawknives. Rods, rungs, table legs and
other long, round or board-shaped parts
can be gripped with the foot-activated
mechanism and then freely shaped with
the use of both hands. Shaving horses
allow you to work in a position which is
ergonomic, reduces stress on the back
and most importantly, is absolutely safe.
Based on a Swedish model, the workbench presented here is light, sturdy and
very versatile due to the adjustable yoke
and footrest. Pinewood bench, frame
and legs. Supplied unassembled, with
instructions.
Bench height 540 mm, max. jaw opening
150 mm.
Length &
No. 706080
&2 299.00
Workbenches
7@
@ 7
#
if it is of extremely solid construction, high-quality workmanship and offers a wide range of functions. Working closely with
renowned German workbench manufacturers and based on our
many years of experience in the trade, we have incorporated all
these needs in our workbenches.
;`\Z\`;`Z<;~\
Building plan of a traditional shaving
horse with different working positions.
&^#?
&;=
inch measurements.
No. 703653
'"& 10.60
C
`[`<;
The work bench which grows with your
kids:
This space-saving workbench provides
the same functionality as professional
workbenches, and is therefore ideally
suited for craftsmen such as goldsmiths,
silversmiths and knifemakers who work
on smaller objects. The legs are available
in different lengths and can easily be replaced, which also makes this bench the
right choice for children and teenagers.
Design:
3
7
shrinkage and expansion
[
=7 #
piece bars
with professional workbenches
<
7
worktop from warpage (central carriage
bolt and tongue)
Z 7
lengths, allowing different working
heights
[
=7
Worktop secured
through breadboard end
D `;~\;3;;|Z]`
`[`<;
Height 770 mm
For bench height '2
No. 706303
&' 120.00
191
A
ALLROUND
[`<;&_
This heavy workbench will captivate you
with its proven construction, flexible
working heights and abundant additional
clamping options. The insertion clamp
allows you to fasten workpieces in the
centre of the worktop or at the front of
the workbench.
Construction:
3
7
shrinkage and expansion
7
[
7
<
7
worktop from warpage (central carriage
bolt and serrated joints)
<
tenon joints
<
#
to integrated truss rods and full-length
tension screws.
{
Clamping support
Deluxe Workbench
Heavy, solid wood workbench with
individual, additional features. This highquality, perfectly manufactured, professional workbench will allow you to create
your own bench that is ideally suited to
your needs and range of uses. We use
specifically manufactured Lie-Nielsen
vise mechanisms for our vises, because
their production tolerance and material
thickness makes them one of the most
durable vise types worldwide.
Construction:
[=7
wood to prevent later shrinking and
checking in service.
stability.
=
single-piece bars
77
7
=2
wide (central carriage bolt and loose
tongue)
;?
&^
pressure surface at the jaws
[
77
7
wood
7
Vises and bench dogs:
3#7 =
#
#>#nisms
`7="=
durable, low-wear, all-steel guide,
? &=
'
system for parallel and clearance-free
3? ^=
2&='=
^&
7>
?mum surface pressure
192
G ZZ]`\3~|{;;Z
The top has additional assembly holes for
inserting clamps and hold-downs to allow
workpieces to be fastened in the center
of the worktop. Various diameters are
7^
=
the size of the worktop.
B
Model
&2&^ 192.00
&2_^ 199.00
C ZZ]`]`<;{|Z
Dog holes drilled in the front of the
bench skirt and our specifically developed front bench dogs make it possible to
use the rear vise for clamping workpieces
in front of the bench top. Can also be
used as a support bolt for long workpieces that are clamped with the front vise.
2
=
$=2%
Matching front bench dogs
_'^^=&"
No. 706337
' 23.90
D \{{\];\`;}
<;;~;`
4 additional slots in the bench base
7 ==
as support for large workpieces that are
clamped in front of the bench. Comes
without bench dogs.
&
No. 706338
&" 23.20
E {\|;<Z=&~\`
With these blocks you can raise your
772=>
Including fastening screws.
No. 706342
2'& 31.90
F <;<\Z;;~~;{]`;;LING
The four feet of the base can be individually adjusted in height for easy and
precise leveling of the workbench. No
more tedious shimming. Indispensable to
prevent warping of the bench top if the
floor is uneven.
No. 706341
"& 112.00
Model 19 mm
For Veritas add-ons
No. 706334
"_ 30.90
Model 26 mm
For DICK add-ons
No. 706335
"_ 30.90
Model 30 mm
For Ulmia add-ons
No. 706336
"_ 30.90
H [`~;;Z~~`\{
[`~;;]\Z;;`
Two plug-in dowels in the pressure
surface of the front vise prevent stains
and damage to the edges of workpieces
by spacing them from the metal spindles.
Another dowel at the outer vise end
serves as a stop and prevents clamped
wood parts from slipping. Dowels can
7
^
dowels.
No. 706339
&" 23.20
I {`\[;`
Finger joint, suspension slide drawer
underneath the bench top for storing
add-ons (such as bench dogs and clamping devices) or tools. Overall dimension
?^?&^
No. 706343
64.90
J Z`]\;;{
Open-pored surface treatment with toxinfree vegetable oils. The oils contain valuable, natural conditioners, bring out the
grain pattern, and lend a vivid structure
with a silky gloss to the surface. They dry
rather slowly, thereby penetrating deeply
and thoroughly hardening the surface.
No. 706344
2"_ 78.50
Oiled surface
Untreated surface
193
A ULMIA[`<;;Z
A good bench must be solid, have a
plane working surface and be fitted with
vices that grip pieces of all sizes firmly.
These requirements are all fulfilled by
this workbench from Ulmia.
Construction:
3
7
shrinkage and expansion
7
[
#
length bars
<
7
worktop from warpage (central carriage
bolt and finger joints)
<
tenon joints
<
#
to integrated truss rods and full-length
tension screws
Vices and bench dogs:
#
multiple glueing, vice 580 mm with patented aluminium-encased guide, max.
=
'
Z |
=
round guide, max. opening 140 mm,
'
=
77
dogs for clamping objects of any shape.
Possible accessories:
\
_2^
Ulmia Workbench, Model 1500
Worktop thickness &2
Worktop dimensions &?2
Overall dimensions &?2
Height 900 mm
Weight 100 kg
No. 706085
&=__ 1,276.00
Front vice
Serrated worktop
9.30
E ;`\Z<;\3~Z
These clamping tools will make your
workbench even more versatile. The rods
can be inserted into a 19 mm drill hole
anywhere on the benchs top, front or
frame. (Suitable auger
_&_^%
Irregularly shaped workpieces are no
match for this clamping system with its
pull-out and rotational action. Rod and
clamping spindle made of steel with
gunmetal finish,
brass knob handle
and jaws. Bolt-
18.8 mm. Fits
_2^=
#__=#^=#^=
#^2
Spindle length 100 mm
Jaw width15 mm
Jaw height 50 mm
Length
194
A
A ];ZZ\3~ZZ;3
A novel clamp system for workbenches
that provides easy clamping of workpieces and components.
Advantages:
^2
7 &
7 ^
7
7
workpieces with round, 4-sided, and
even surfaces
How to use the clamp system:
After inserting the included mounting
shaft into the bench dog holes, the
spring support mechanism will allow you
to adjust the double guided clamp arm to
any required height. Now you can simply
mount the adapter you need for the respective clamping purpose over the square
hitch. The eccentric tension lever can
clamp both to the left- and to the righthand side and you can fold it to the front
after clamping to keep your work area
clear. The rubber coating on the adapters
prevents slipping and sliding.
Material:
All components are made from highquality materials such as stainless steel
and polyamide.
Suitable for Ulmia and DICK-AllroundWorkbenches.
Jaw opening 150 mm
Jaw depth ^
Shaft diameter ^
No. 706322
&^'_ 164.90
C
\33<;{|Z=
1 PAIR
Round, rotatable bench dogs with a dual
ball detent system. The bench dogs
planar clamping surface can be turned
around and adjusted to the individual
form of the work piece, thus ensuring
a perfect hold. Fits DICK Workbenches
Deluxe and also suited for retrofitting
existing workbenches.
Length
Shaft diameter
No. 705832
^^ 38.50
B Z;`\3~
This clamp allows workpieces to be
fastened in the centre of the worktop or
at the front of the workbench. Made in
collaboration with a German clamp manufacturer. Fits Ulmia and DICK-Allround
workbenches.
Jaw opening
Jaw depth 100 mm
Shaft diameter ^
No. 706320
_' 93.30
F ;`\Z<`\ZZ<;{|Z=
#~;;Z;
Cylindrical brass posts ( 18.8 mm) with
side springs. The textured jaws have an
$%
D
\33]`<;
DOGS, 1 PAIR
With dog holes drilled in the front of the
bench skirt and these specifically developed front bench dogs it is possible to use
the rear vise for clamping workpieces in
front of the bench top. Can also be used
as a support bolt for long workpieces
that are clamped with the front vise. Fits
DICK Workbenches Deluxe and also suited for retrofitting existing workbenches.
Length 100 mm
Shaft diameter
No. 705833
^" 36.80
1
2
E
[{;Z\`;<;
DOGS, 1 PAIR
Beech wood bench dogs with steel
pressure spring for fixing workpieces at
the required height. These bench dogs
are gentle on your tools, making them
particularly well suited for planing or for
clamping delicate workpieces. Fits DICKWorkbenches Deluxe and also suited for
retrofitting existing workbenches.
Head ^?
Shaft '?
Length
No. 705834
&"_ 23.50
Length
195
B
A ULMIA\33<;{|Z=
1 PAIR
Round, rotatable bench dogs with a dual
ball detent system. The bench dogs
planar clamping surface can be turned
around and adjusted to the individual
form of the work piece, thus ensuring a
perfect hold. Fits Ulmia-Workbenches.
Length
Shaft diameter ^
No. 706086
^2^ 42.40
B Z\`;<;{|ZZ;=&~\`
Aluminium bench dogs with steel
pressure spring for fixing at the required
height. Fits DICK-Allround and Deluxe
7Z
"?=
^?
No. 706321
47.60
C
C Z\{\`{<;Z;
Metal vice with double guide tracks, trapezoidal thread, extendable bench dog.
Screwed to the bottom of the bench plate
$ 2%=
holes for fastening wooden blocks.
E ~\;`3\;`ZZ;
This multipurpose vice is one of the most
versatile tools for the workbench top. The
exceptionally solid, grey cast iron heads
can be tightened parallel to one another
or individually swiveled to accept oddly
shaped pieces. The
vice mounts through
any hole in the bench
top (a dog hole will
do). Once mounted,
it can be easily
^2
F 3~`~Z;<;Z;
Multifunctional:
The most diverse clamping tool for the
demanding woodworker: the main jaws
196
D ~`;Z<;Z;
Solid metal vice enables exact and quick
clamping on the joiners bench. The grey
steel guide rods virtually free of play.
Spindles have asymmetrically-shaped
threads to withstand extreme loads. Quick
adjustment with the lever locking mechanism prevents time-consuming winding.
The extendable dog enables clamping
7; 7
screwing the vice to the bottom of the
7$ 2%=
jaw drill holes for fastening wooden blocks.
^'22 284.00
Clamping with
bench dogs
A ;;`~\`\;Z;
The dual-prism, inside guide tracks of
this vise prevent contamination and
damages while the machined track
surfaces guarantee precision and long
service life. The centrally located and
well-protected spindle with double-action
trapezoid thread gives the vice its high
and optimally distributed clamping force.
Drop-forged, surface-hardened clamping
C
1
B ;;`3\|;]
~`;;\[Z
Protects your workpiece
from dents. Aluminium
body, easy and secure
application using integrated special magnets.
Despite the high
amount of magnetic
force, it does not
penetrate to the clamping surfaces so that
the workpiece is not
magnetised nor is swarf
attracted.
E 3#\|;Z;
Light aluminium vice, rotatable in all
directions, for light assembly or other
tasks. Ball-joint with quick locking
mechanism.
7?^
Jaw opening 100 mm
Jaw width 75 mm
Weight &
No. 705796
2& 26.90
C ;;``\|~\;
This makes your
Heuer vice (No.
_2&%
manoeuvrable.
Completely steelforged rotating plate
which can be set
to any angle quickly and securely using
the spindle key. The closed construction
protects the vice from shavings and dirt.
;?
the accurately milled rotating assembly
and support plate.
Weight
No. 706101
^_ 63.90
F Z[;;
A ball-jointed foot lets you rotate this
solid vice about all three axes. The
position can be set to meet the specific
demands of the workpiece, the two knob
handle screws allow for quick and secure
fastening. Small anvil on the back. The
base plate can be fastened to the work
plate with four screws. Replaceable jaws.
Jaw opening 70 mm
Jaw width 80 mm
Weight '2
No. 705826
22^ 78.90
D 3#\|;Z;
The ball-jointed foot
can be adjusted to any
angle, making the vice
extremely versatile. The
workpiece is screwed
onto the plate from the
bottom. The grub screw
makes the plate easily
detachable from the central mount.
<&?&=&
Plate diameter 90 mm
Weight ^^
No. 705830
' 57.60
G ;`\Z\`;`ZZ;
Robust sculptors vice with a fully rotating, height-adjustable plate. The sturdy
arched aluminium body and secure clamping mechanism make this vice suitable
for heavy-duty work. The vice can be
bolted to the bench or mounted in a dog
$
_&_^%<
&&?"=?
Plate diameter 87 mm
Length &
Weight ^
No. 705929
"^ 109.90
H ;\`;`Z|
The Kelton Carvers Jig is designed for
flexible and secure clamping of any kind
of carving work pieces. The jig base can
be bolted to the workbench or clamped
in a vise. It is possible to install the ball
and socket clamp unit either horizontally or vertically, and the hexagonal
shaft provides secure locking in various
positions. The ball and socket clamp
unit allows vernier adjustment in almost
any position. The work piece can either
be bolted to the faceplate or onto the
carvers screw. The surface is bronzed.
No. 702107
^&"_ 376.00
197
Useful Aids
A
C
E
A 3\|;<\`]
;?
$ %
magnetic tool bar. For easy access to
your tools. Black plastic body, mounts
using screws.
Dimensions ^"?^?^
No. 707210
&_2 25.90
C 3\|;<\`=3\~;
Magnetic tool bar for hand tools and
37
#
manent magnetic rails.
Dimensions 2?_?
No. 707224
&_ 14.60
B {<;#Z{;{3\|;
TOOL BAR
Maximum strength (up to 10 kg) tool bar.
Can be mounted using screws or via its
own magnetic power (on ferromagnetic
wall surfaces) Chrome-plated metal rails,
7
Dimensions 2??
No. 707222
" 24.90
D 3\|;<\`
{;`
Magnetic tool bar for light to medium
weight tools. Powder-coated steel rail
with plastic body.
Dimensions ??
No. 707220
' 6.90
E `;`<\Z=2#~;;Z;
These ball transfer units allow you extend
machine tables and move heavy workpieces wherever you need them.
The steel balls,
#
ter, are fitted
in a zinc-plated
bearing, which can
be fastened easily
with two screws.
No. 820205
&2_ 19.60
F
F 3`;`33;`
For precise trimming and clean mitre
cuts. Simply cut stock slightly oversize
and then make the final cut using the
mitre trimmer. Ideal for cutting frames,
baseboards and also for precision
"#
=
The sharp, skewed blades allow highprecision shearing cuts. The gear driven
lever allows effortless use. Heavy-duty,
grey iron casting with precisely machined
working surfaces, double-sided guides
7="
fences. Comes with two hardened tool
=2
=
Mitre
Butt joint
Chamer
Chamfered edge
G ~;`~3;&;\`|
~`;`
This all-round hearing protector from
market leader Peltor provides the best
imaginable protection despite being
comfortably light. The slim profile of the
muffs still provides a generous inside
depth and, combined with the two-point
attachment, ensures the best possible
comfort even during extended use.
Attenuation rating SNR (Single Number
`%_<`
rating 87-98 dB.
Weight 180 g
No. 707551
&2 18.40
I
198
H <\{;{;\`~|Z
These folding banded earplugs easily fit
into any pocket and rest outside the ear
canal opening
without pressure. The band
can be worn in
several positions, whether
on the head, under the chin or round the
neck. The perfect solution for users who
are in and out of noisy areas.
No. 707904
& 4.90
I `{;{;\`~|Z=&~\`
Multi-use earplugs with easy-clean
flanges. The material of these
earplugs uses the body heat to
adjust to the shape of the individual ear canal. The earplugs
are attached to a cord so that
they do not get lost when taken
out frequently.
No. 707926
&2 1.50
J Z\];|||;Z=Z\{\`{
Modern, lightweight safety goggles with
flexible, non-slip sports temples for comfort. Soft nose pads ensure optimum fit
and can be removed for cleaning. 100%
UV-protection, scratch-resistant.
Weight
No. 707552
"' 11.40
K Z\];|||;Z=~`];ZZ\
High-quality safety goggles with extrawide, curved lenses for maximum coverage of the eye area. Adjustable angle
and temple length. The soft, non-slip
pads at all touchpoints such as eyebrows,
bridge of the nose and temples ensure
a comfortable fit. 100% UV-protection,
scratch-resistant, anti-fog.
Weight ^
No. 707901
&'2 15.30
L |#~;`]`3\;Z\];
|||;Z
For ultimate protection, these safety
goggles have high-quality face cushioning and keep off wind, debris and
dust. The
easily adjustable flameresistant
headband,
attached
with a simple snap lock, provides an excellent,
comfortable fit even in demanding
work environments. Thanks to the
anti-fog coating on the inside and the
anti-scratch coating on the outside,
^?
#
ventional ones. 100% UV- protection,
scratch-resistant.
Weight ^
No. 707902
&_^ 20.50
A
A Z~~[;`\~\;
This respirator visor with built-in fan is
comfortable to wear while offering the
safety of a face shield as well as dust
and pollen protection. The fan is powered
by rechargeable batteries and lets clean,
filtered air flow over the face without
impairing breathing like conventional respirators. The visor,
whose soft foam
lining fits tightly at
the chin and temples, does not fog up
and offers enough
space for glasses
and beards. The
visor, filter and fan
housing are made
of high-impact plastic to protect
&2
Battery life 8 hours
No. 707531
^"' 416.00
`;~\;3;];`Z;]`Z~
~[;`\~;~\{\;=&~\`
] __^__^&
No. 707534
" 24.90
`;~\;3;<\;`]`Z~~[;`\~\;'`Z
] __^&
No. 707535
"' 114.00
B <]\;Z;{
The Bionic face shield combines modern
ergonomic design with first-class protection and comfort. The robust catch
adjustment mechanism allows you to
position the visor
as you please to
adjust to different
situations. With the
ratcheting headgear
mechanism and
adjustable headband, the shield
can be adjusted to any head shape and
size. A soft, easily removable sweatband
and a foam lining to protect the back of
the head ensure a comfortable fit. The
high-impact, easy-to-replace visor with
extended chin and top-of-head protection
is also suitable for wearers of glasses and
for use with respirators.
Weight ^
No. 707903
_" 33.20
C DICTUM CAP
High-quality cap made of robust beige
cotton with embroidered DICTUM logo.
The head size is adjustable through a
band with a metal buckle. Made from
&7
27
red vents.
No. 707770
"2 5.90
F
E Z~\]3\Z]`;'
This convincing, elaborate twin filter half
mask is designed for optimum function.
It is well suited to versatile jobs and can
be used for painting and gluing as well
as for mixing lacquers.
Supplied without filter.
Z~~\`\;];`~$~`;#
];`%=&~\`
Filters harmful and carcinogenic particles
from the inspired air and prevents contamination of the gas filters.
Fits No. 707541. Weight 5 g
No. 707542
^'_ 4.60
Z~\~`];`\=&~\`
Activated carbon filters for working
with higher concentrations or for longer
]
\
against organic gases and vapors with a
7 2
< 0.5 vol.%.
Fits No. 707541. Weight
No. 707543
' 10.00
One size
Weight "
No. 707541
&&^ 13.50
Z~3<\];`\&~=&~\`
Combined activated carbon and particulate filters. Filter grade A1 for protection
against organic gases and vapors with a
7 2
&
~
protection against harmful and carcinogenic dusts based on water and oil.
Fits No. 707541.
Weight
No. 707544
&^ 12.30
G 3{;{Z3\Z]]~
For protection against harmful and carcinogenic dusts based on water and oil.
Against all dusts listed under FFP1, and
additionally against granite, brake dust,
cement, cotton, lead, and wood dust as
well as particulate welding fumes, and
silicone. Total inward leakage not more
than 11 %. Intended for single use. With
Ventex-valve
No. 707978
2.90
199
A PROHANDS#`;ZZ\
|;Z
Never cut your hands
again when working
with sharp tools, sheet
metal or glass. Made
of extremely durable
Dyneema yarn*, these lightweight gloves
are highly resistant to cuts caused by
various types of tools. That makes them
equally practical for working with wood,
S
M
L
No. 707650
No. 707651
No. 707652
No. 707653
No. 707654
&''
&''
&2_
&2"_
&_2
18.90
18.90
19.90
20.20
20.90
B ]|;`~`;`Z=^#~;;Z;
Fastened to the fingers with elasticated
straps, these leather finger protectors
protect you from injury when working
with sharp tools, sewing, cultivating
thorny plants, and many other uses. They
are also ideal for protecting your fingers
if you have cut them. Set includes protectors for two fingers and one thumb.
No. 717513
'_ 10.40
C \~\;Z;Z;Z\#\<[
\`ZZ;3
Jika-Tabi - Japanese workers shoes - turn
the feet into fully functional clamping,
climbing and gripping tools - for holding
workpieces, artistic balancing on roof
structures or climbing. An integrated air
cushion makes them gentle on the joints
and extremely comfortable to wear.
2
2
_
'
"
No. 707670
No. 707671
No. 707672
No. 707673
No. 707674
No. 707675
No. 707676
No. 707677
No. 707678
^^^
^^^
^^^
^^^
^^^
^^^
^^^
^^^
^2
39.90
39.90
39.90
39.90
39.90
39.90
39.90
39.90
42.90
D #;ZZ=~\`Z
Seamless knitted socks with separate
toes, in keeping with Japanese tradition.
They allow better airing, and so help prevent sweating and athletes foot. Blended
fabric of 85% cotton and 15% nylon.
One size, black.
No. 707667
& 11.90
E \~\;Z;ZZ|Z=&~\`
]
#7;
7
=
reinforced heel and toes, one size, beige/
grey.
No. 707615
6.60
F WORKSHOP APRON
Durable, beige workshop apron for any
kind of job, from gluing to sharpening to
surface finishing. Small main pocket and
yard stick pocket. Adjustable neck strap.
2 =^
Size 90 x 80 cm
No. 707507
29.80
I
G
G
COTTON APRON
The hefty cotton fabric is seamed on all
sides, and impregnated to repel water
and dirt. The large, sealable front pocket
is perfect for tools and materials while
the small pouch serves to keep your
glasses. Colour green
Size
2?'
90 x 87 cm
200
H ]`;;\;`\~`
This heavy-duty leather apron provides
reliable protection against dirt, dust,
wood chips and shavings. Made from
=
it is ideally suited for woodworking,
woodturning, sharpening, sculpting and
gardening. Inside breast pocket, adjustable shoulder straps.
Size "?2
No. 707500
_"'^ 95.00
I \~\;Z;[`|;Z
Its high-quality cotton cloth makes
it highly durable and responsive to
humidity. Suitable for craftsmen, artists,
painters, sculptors alike as well as for
meditating or simply wearing around
the house. Strong cotton cloth, soft and
pleasant to the touch. Jacket comes
with open, medium-length Kimono style
M
L
No. 707620
No. 707621
No. 707622
No. 707623
'^"
'^"
'^"
'^"
99.90
99.90
99.90
99.90
Woolpower
Woolpower AB was established in
&"2"
=Z=
production of nylon tights. In the
early 1970s the company developed
a new material in collaboration with
the Swedish army: Ullfrott Original. Beside military and police organizations, mainly people who work
outside and many others who like to
feel warm are among the customers
for clothes made of this fiber.
7$=2
%7 7
suit different temperatures and forms
of activity
3
are manufactured on circular knitting
machines. The advantage of this technology is that the garments worn next
to the skin only have minimal seams,
which results in a very comfortable fit
'
ty terry loops together with the crimped
wool structure form a jersey knit that
traps large quantities of air and therefore provides good heat insulation.
A [~[;`Z[;\;`=
|`;;|3
Sweater with short collar and zipper.
The back is longer to prevent undesired
ingress of coldness.
Colour green
Material 70% Merino wool,
'~ =;
Size
Z
S
M
L
No. 815005
No. 815006
No. 815007
No. 815008
No. 815009
"^
"^
"^
"^
"^
109.90
109.90
109.90
109.90
109.90
Size
Z
[
XS
^2#^'
#
Z
'#"
22#_
S
#
2#'
Z
"#"'
_#'
M
#2
#
3
"'#&2
'#"
L
'#
#2
&2#&&
"#&
XL
#
'#2
&&#&
&#&&
B
C
B [~[;` CARDIGAN,
<\2|3
Very warm cardigan with thick collar and
a full length zipper. Cuffs have thumb
holes. The back is longer to prevent
undesired ingress of coldness. The collar
has the Woolpower logo knitted-in.
Colour black
Material _3
=^~
C [~[;`|#Z;;;{
`;[;=<\|3
Long-sleeved crewneck shirt. The back
is longer to prevent undesired ingress of
coldness. Cuffs are knitted in.
Colour black
Material 23
=~
=&^~ =;
Size
Size
Z
S
M
L
No. 815010
No. 815011
No. 815012
No. 815013
No. 815014
&&_2
&&_2
&&_2
&&_2
&&_2
144.90
144.90
144.90
144.90
144.90
Z
S
M
L
No. 815000
No. 815001
No. 815002
No. 815003
No. 815004
'_
'_
'_
'_
'_
69.90
69.90
69.90
69.90
69.90
Z
S
M
L
No. 815015
No. 815016
No. 815017
No. 815018
No. 815019
2"
2"
2"
2"
2"
74.90
74.90
74.90
74.90
74.90
201
A [~[;` SOCKS,
<\2|3
Thick socks, ideal to use at low temperatures or to wear as slippers to prevent
cold feet.
Colour black
Material 23
=~
Size
^2#^"
40-44
45-48
No. 815026
No. 815027
No. 815028
&' 21.90
&' 21.90
&' 21.90
B [~[;`;;#;|
ZZ=<\|3
Thicker knee-length socks. They enhance
heat-insulating, keep your feet comfortably warm and protect against wetness
and cold weather.
Colour black
Material 23
=
^2~
Size
Size
^2#^"
40-44
45-48
No. 815023
No. 815024
No. 815025
&_2 25.90
&_2 25.90
&_2 25.90
Woolpower Lite
Unisex base layer functional year-round
underwear:
new, very light rib knit material with
a combination of soft Merino fibers
$
=&"
%
functional fibers.
^2#^"
40-44
45-48
No. 815020
No. 815021
No. 815022
Frotteestrick
The special knitting technique offers
excellent heat-insulating properties and warms
even when wet. Woolpower socks absorb and transport away perspiration without losing heatinsulating properties.
& 16.90
& 16.90
& 16.90
E
F
D [~[;`;|Z=
3;Z
;band with Woolpower logo stitched in.
Colour black
Material 80% Merino wool,
~
E [~[;`;|Z=
[3;Z
;7
with Woolpower logo stitched in.
Colour black
Material 80% Merino wool,
~
F [~[;`;;;Z`
Z;;;{
Short sleeved crew neck undershirt. The
back is longer to prevent cold air from
entering. The raglan cut sleeves prevent
seam rub.
Colour black
Material 80% Merino wool,
~
Size
Size
Size
S
M
L
202
No. 815046
No. 815047
No. 815048
No. 815049
No. 815050
64.90
64.90
64.90
64.90
64.90
Z
Z
S
M
L
No. 815051
No. 815052
No. 815053
No. 815054
No. 815055
64.90
64.90
64.90
64.90
64.90
Z
S
M
L
No. 815036
No. 815037
No. 815038
No. 815039
No. 815040
^
^
^
^
^
59.90
59.90
59.90
59.90
59.90
s
ipant
c
i
t
r
Pa
ve a
recei OUNT
DISC ases*
%
0
1
h
purc tion
y
n
a
on
dura p
e
h
t
o
for
orksh
w
a
of
10 % discount
For the duration of a workshop, participants will receive a 10% discount on any
purchases* made in our shop.
Bonus card for workshops
Loyalty pays! After participating in five workshops,
you will receive a 50
DICTUM shopping voucher.
For each further participation, the value of your
voucher will increase by 10 .
You will receive the bonus card
automatically on registration.
Combi bonus
You will receive a 20 DICTUM shopping voucher for booking a combination of basic and
advanced courses or a series of courses.
Apprentices
Upon verification, apprentices will receive a
10% discount on workshop fees.
WORK
SHOPS
WO
SHORK
201P2S
NE
DIC W:
kurs TUM
.we
Mun rkstatt
ich
WORKSHOPS
Knowledge grows by communication!
'
+;
Your teachers.
International experts in their crafts.
The kurs.werkstatt also offers the option of using the workshops and
machinery for your own projects on an hourly basis.
The programme.
Order a free copy of our workshop brochure
online at www.more-than-tools.de/workshops
or by telephone on +49-(0)991-9109-902
WOR
SHOPK
2012S
Metal Working
Sharpening
Wet Shave
Working in and
with nature
Leather Working
}
]?}
;}
"#$%'"#'&&^
"#$%'"#'"_"22
7
Opening hours
3 ==[=
} '
]
}"
Also by arrangement and during courses
Leather- and
Paper-Working
Tools
205
Leather-Working Tools
C
A
B
C Z[;];
This ball-jointed knife is used to pre-cut
the outlines of motifs to be punched.
Its length can be adjusted to fit any
hand size, allowing perfect, comfortable
control and thus exact cuts.
Handle diameter 11 mm. Without blade.
Overall length 70 - 90 mm
No. 708428
" 28.90
B \~\;Z;
;\;`];
Wide, curved blade made of double-layer
steel with wrapped handle. Right bevel.
Blade width
Overall length 195 mm
No. 710532
&^ 29.90
D
A ~];\]3];
a wide, semicircular blade allows the
knife to be guided at a right angle even
when cutting thick leather. Long, exact
cuts are made with the middle of the
blade, tight curves with the tips. Also
used for thinning out leather.
Handle made from oiled native cherrywood, with brass ferrule.
D Z[;];<\{;={;\;
]
=] _''
Blade width 2^
No. 708430
'^ 9.90
F
F <;;];
Single, right-bevelled and slightly curved
knife for skiving (trimming) leather edges.
Blade width
E Z[;];<\{;=;`Z\
Classic swivel knife blade for universal
] _''
Blade width 9 mm
No. 708429
22 7.90
G \~\;Z;;\;`
<;;];
For cutting and trimming leather and
cardboard. Single-bevel blade made of
double-layered steel. Magnolia handle.
Blade width ^2
Overall length 185 mm
Blade length 2
Blade thickness
No. 710714
& 14.30
H ]`;;\;`ZZZ`Z
easily
cut through leather up to 4 mm thickness.
The serrated edge on the lower blade
prevents the material from slipping.
The hook-shaped form can be used for
marking and creasing. Also suitable for
I Z\`~;||{;]`Z[;
;Z
This guide allows easy sharpening of swivel knives with a consistent sharpening
angle.
J Z`\~;`
This wooden strap cutter cuts leather
straps up to 100 mm wide. The leather
is guided through the continuously adjustable clamping bars and cut with a cutter
which is easy to replace. Max. thickness
of leather 7 mm.
Dimensions ?&2
No. 708327
^^^ 39.90
Replacement Cutters, 5 pieces
No. 708338
22 7.90
Lifetime sharpening.
206
K \Z`\\Z`\{;`
Strand cutter for cutting leather strands
&
L `;{;\;`~\;
For tapering (thinning) leather edges.
Replaceable blade.
Overall length 170 mm
Blade length 40 mm
No. 708306
"&2 10.90
`<
No. 708307
&&2 13.80
;\`]\{Z;[|;\;`
Al Stohlman:
Very detailed instructions on the topic of
sewing leather. You are introduced step
by step to the tools, their proper handling,
and different techniques for sewing and
folding. Many methods and examples are
described in detail, from a simple belt to
a seat cover to square and round leather
boxes. Including a construction manual
for a stitching horse.
2"~=~
7=7
='?&2
No. 713932
&'2 15.90
A ;\;`#Z~|3\;
Whether you want to split or skive pieces
of leather, this mechanical leather-skiver
with its hardened blade makes the task
much easier. Based on the patented
Osborne 84 model, this machine will
impress you with its ultra-solid construction. A swivel handle lets you safely adjust the roller precisely to the thickness
of the leather. If required, you can lock it
in position with a stop. A brass retainer
helps you insert the leather and prevents
premature splitting. Two Allen head
srews allow you to conveniently adjust
the blade or remove it for sharpening.
Dimensions ^?&?
Weight 2
No. 708328
^_' 659.00
B ;{|;#`33|
~\;Z
For bevelling and
rounding off leather
;
ground by hand
and tested.
Stained maple handle
Overall length &^
Blade width
4 mm
No. 708309
4.8 mm No. 708325
^^^ 39.90
^^^ 39.90
C ;{|;<;;;`Z#^#~;;Z;
For fine leather edges:
;
curved edge
beveller for
removing
shavings and
bevelling
leather edges.
A supplied
sharpening set allows easy and precise
^
bevellers for 0.8 mm, 1.0 mm and
&7
Overall length 180 mm
No. 708420
'_ 69.90
Gouges
To fold thick leather, this tool is used to gouge out grooves along the folding
edges. This will allow sharp-edged folds and corners. Can also be used to countersink seams. The depth stop can be adjusted with a knurled screw.
D
D ]`;;\{Z||`;`
For sinking thick threads anywhere on
your project, carving decorations or bending edges in thick leather. The stitching
groover is used free-hand or guided along
a fence. Replaceable blade in solid steel
blade holder.
Groove width 4 mm
Overall length 140 mm
No. 708422
" 24.50
Replacement Cutter
No. 708432
_& 6.80
E ||;
V-shaped blade for detailed works like
book covers and leather wrappers.
Overall length 145 mm
No. 708414
&'"& 22.50
F ||;
U-shaped blade for saddle works.
Overall length 145 mm
G
G ]{|<;
Folding bone for smoothing seams, folding and polishing leather edges as well
U-Form No. 1
Blade width
No. 708412
&'"& 22.50
U-Form No. 3
Blade width 4.0 mm
No. 708413
&'"& 22.50
G `;\Z;`
For folding and marking bending edges.
When gluing leather parts, the creaser
is used to press on the leather and to
squeeze out excess glue.
1 Size 1
Blade width 8 mm
Overall length 145 mm
No. 708410
&2 25.70
2 Size 2
Blade width &
Overall length 145 mm
No. 708411
&2 25.70
207
A
A ;\;`{`~=Z\{\`{=
2#~;;Z;
Z}&^^
Overall length 140 mm
No. 716156
&^ 29.90
C ;~Z;[`;
;`=&"#~;;Z;
Hole punch set consisting of chrome-plated handle, 15 punch blades of different
diameters, a spring-loaded centering tip
and a circle cutter. The small blades are
screwed onto the handle, while medium
blades (small base) and large blades (large base) are inserted and snap on. This
B
B ;\;`{`~=~`];ZZ#
\=&#~;;Z;
Z }&^
^2'
Overall length 140 mm
No. 716159
2"_ 55.90
D ;~;Z='#~;;Z;
High-quality punches of German
production for making holes in leather,
cardboard, plastic etc. From special
E `;|~~;`Z
For punching leather, cardboard, rubber,
plastic etc. With six punches with
^^
4.5 mm. The diameter is displayed in the
F `\3;\~;Z=
&'#~;;Z;
18-piece punch set with different patterns for decorating leather and wooden
surfaces. Punches can also be heated for
branding technique. Tool steel.
Dimensions &&?&&?2'
No. 708311
^' 30.20
G Z;\33;`
Well-balanced slim hammer with a rounded face, slim pane and ergonomically
shaped ash handle.
Head weight ^
Overall length 2
No. 705687
&'_ 21.50
J ~Z`\~;{~;Z
Punching tool made of carbon steel. For
pointing belts and straps. Pointed arch
shape available in three sizes.
Overall length &^
Blade width
208
'" 33.90
^&& 36.90
^^^ 39.90
H
H 3\|;\\33;`
From above, this hammer resembles a
horseshoe magnet because
of its split end,
which provides a stronger magnetic force
than a design with a round magnet.
The split magnetic end allows you to
position tacks safely and easily, while the
striking face is used to drive them in.
Head weight 140 g
Overall length '
No. 708310
^2& 51.90
I
I `\[{;\33;`[;\{`;
American buffalo hide coiled around a
lead core dampens the blow and simultaneously protects the surfaces of sensitive
pieces from damage. Ideal for leather
work, furniture assembly, interior and
restoration work. The rawhide heads are
highly resistant to wear and can also be
used for striking stamping and punching
tools. Hickory handles
Head diameter ^
Overall length ^
"
Total weight
2
450 g
No. 714327
No. 714328
2^" 31.40
^__ 39.00
A Z3\`;`
; 7
hoop and betula wood handles for
marking seams. Thanks to the bent shaft,
the stainless steel wheel can be moved
B |`;`
For sinking seams or gouging decorative
grooves parallel to leather edges. The
replaceable blade is fully and easily
adjustable. The distance between stop
777^#
^^=
&Z
blade holder.
Overall length &^
No. 708421
&" 22.90
Replacement Cutter
No. 708431
_& 6.80
C |`;`[]`;;\{~
Practical and versatile:
For parallel sinking of seams and cutting
decorative grooves
along edges.
For working on
leather surfaces,
the adjustable
parallel fence
$&#&%
be removed. The
supplied steel
tip allows it to be
used as a creaser,
free-hand or with
a fence. Solid
steel blade holder. Replaceable blade,
groove width 1 mm.
Overall length 140 mm
No. 708423
"'^ 35.50
Replacement Cutter
No. 708433
"2 5.90
D ;\;`||Z;Z
High-quality Japanese chisels for
marking and punching holes. Diamond
Tooth spacing 5 mm
E \[\{;
Clamping handle with knurled ferrule.
Beech handle.
Overall length 95 mm
No. 708301
& 12.50
Model
G \[\ZZ`3;
Stabbing awl, curved sewing awl
and stitching awl. Fit awl handle
_'^&
Overall length 2
No. 708302
^
H Z;[|Z;`
Guard with metal insert for pushing
needles through leather, thick fabric
and felt. Strong leather, riveted. Righthanded. 55 g.
No. 708300
&_& 20.40
F
2
3
F Z\{{;3\;`Z;;{;Z
Overall length Thickness
1 80 mm
2 2
3
1.4 mm
1.1 mm
0.7 mm
No. 708417
No. 708415
No. 708416
^^
^'
^'
4.20
3.90
3.90
4.80
Stitching Pony
For holding the trim firmly in place, allowing you to use both hands to control the cutting or sewing tools.
This aid greatly reduces the risk of injury when forcing awls or needles through layers of leather. Allows a comfortable working position, whether sitting or standing. Self-opening mouth through pressure spring.
Clamps by tightening the wing nut.
I STITCHING PONY
Solid wood stitching pony in an elegant
design with integrated aluminium hinge.
Practical base plate for clamping on
table tops or worktops.
Max. opening 45 mm,
mouth width 90 mm,
mouth depth 150 mm,
_
Overall length ^
Weight &
No. 708171
22^ 78.90
K ;`;\{=[\;{
Thanks to its waxed surface, this smooth
linen thread is water-resistant and keeps
its shape.
Overall length 10 m
Thickness 0.8 mm
No. 709025
^' 3.90
L
J STITCHING PONY WITH
SITTING BOARD
This stitching pony can be clamped to
table tops or, when used in a sitting
position, placed between the thighs.
Sitting board and arms made of warp-free
multiplex. Max. opening 80 mm, mouth
&= 2=
Overall length 440 mm
Weight "
No. 708172
2'' 81.90
2
L ;`;\{
Unwaxed line thread for hand-stitched
seams in leatherwork. Is usually drawn
through beeswax before use.
1 Colour black
Overall length ^
Thickness 0.8 mm
No. 831402
'_
5.80
2 Colour beige
Overall length
Thickness &
No. 831405
_&
6.80
209
Leather Care
Rapide Leather Care Products
High-quality products for the preservation and care of leather. Primarily based on vegetable oils and waxes,
these products are environment-friendly, non-allergenic and in perfect harmony with the natural product leather.
A `\~{;;\;``;\3
For durable protection and preservation
of all smooth leather products like saddles, boots, seats, bags and backpacks.
Applied with a cloth or brush, it soaks
into the pores of the leather and keeps it
supple. Free of solvents, pleasant smell,
uncoloured.
Content
150 ml
No. 820145 ^"^&
1000 ml
No. 820146 &&'&
"2
B `\~{;[;\Z;;
Vaseline should always be at hand as an
all-purpose cream for protecting dry skin,
preserving leather, but also as lubricant
and anti-rust agent. White Vaseline by
Rapide is a pure paraffin product, free of
aromatic hydrocarbon or other harmful
substances.
Content 150 ml
No. 820147 ^^& 5.30
5.90
C `\~{;;\;`
For the deep impregnation of smooth and
thick leather. Soaks in well, keeps the
leather humid and protects it from water
and dirt. Free of solvents, pleasant smell,
uncoloured.
Content
100 ml
No. 820142 & ^_ 5.20
1000 ml
No. 820143 &^"& &&2' 13.90
D ;];\;`<\3
Without care, leather products soon
become dry and brittle. This resin and
acid-free leather balm with beeswax
makes leather supple, tear-resistant and
impregnates it very effectively.
Content 500 g
No. 820148 &_&
_^ 8.60
"" 11.80
E
E Z\{{;Z\~|;`;Z\~
Due to its high content of moisturising
glycerine, this saddle soap is ideal
for cleaning all kinds of leather items
without drying them out. Rub well with a
squeezed sponge or cloth.
Content
No. 820144 '& '' 7.00
F `\~{;;\;`{`;ZZ|
Milky emulsion for cleaning and impregnating all kinds of leather, even reindeer
and elk leather. Keeps the leather flexible, humid and renders it water-repellent.
Content
No. 820140 ^_2& _" 9.40
1000 ml
No. 820141 & &^ 25.40
G BALLISTOL3~`;|\Z~`\
PLUVONIN
Pluvonin is a highly effective spray for
impregnating all textiles and napped
leather, based on nanotechnology. It
is ideal for weatherproofing outdoor
clothing as well as backpacks, tents,
maps, sails and umbrellas. This product
is hydrocarbon-free and does not damage
the ozone layer.
Content
No. 705442 ^& ^'_ 4.60
Paper-Working Tools
I
J
I ~\~;`;`
For cutting paper, cardboard, foil and
thin fabrics. Rotating blade, ergonomic
aluminium handle. Blade 45 mm
$^%=
Overall length 150 mm
No. 710536
"' 11.40
Replacement Cutter
No. 710537
" 3.50
H CUTTING PAD
;=#
#
repairing surface. Can also be used
as a base for writing and drawing.
With imprinted grid.
Dimensions
210
2.90
K \33|{;`\
]`3\;`
With groove for the mat cutter (No.
708090), slip-proof and with scale
markings.
Dimensions 2
No. 708092
&&" 13.20
J |;]`Z~\~;`
Starch-based liquid glue,
especially suited for Shoji
paper. Dosing spout with
stop for accurate application
to Shoji rungs.
Content 150 ml
No. 715990 &"^&
Cutting rules
are to be found in
chapter measuring
and inspection
instruments.
M ]{|<;
Folding bone for smoothing seams, folding and polishing leather edges as well
as folding paper. Buffalo bone.
Dimensions &'??
No. 708305
"' 11.40
L 3\;`
]
"
V-shaped sharpened blade for
cutting clean
edges. Plastic
7
blade holders and 5 double-sided blades.
No. 708090
& 14.30
5 Replacement Blades
No. 708091
"2 5.90
MAKING SHOJI
Toshio Odate:
Masterpieces of
Japanese Craft
Culture. In this
book, Toshio
Odate explains
how to make
a Japanese
sliding door,
from layout to
gluing on the
paper. Having
been trained himself as a tategushi or
sliding-door maker, in Japan, he gives
insight into this traditional craft with
great expertise and explains the process
comprehensibly. &~=~
7=
&_7
&
=
&?'
No. 713470
&"^ 20.90
211
Finishing
B
A
1
1
A KLINGSPOR\<`\Z;~\~;`
~Z]\7
ximum stock removal and a uniform scratch pattern. Suitable for hand and machine
use. Antistatic - prevents premature clogging.
|
}\ ?=
?^>
1 Strips
Dimensions &&?'$Z
%
2 Roll
Dimensions &&?
Grit
Grit
80
100
&
180
^
400
No. 706366
No. 706367
No. 706368
No. 706369
No. 706370
No. 706371
No. 706372
'22 10.30
_"' 9.50
_"' 9.50
_"' 9.50
_"' 9.50
_"' 9.50
_"' 9.50
80
100
&
180
^
400
No. 706373
No. 706374
No. 706375
No. 706376
No. 706377
No. 706378
No. 706379
^&^
'"
'"
'"
''
''
''
37.30
33.90
33.90
33.90
34.30
34.30
34.30
1 Strips
Dimensions &&?'$Z
%
2 Roll
Dimensions &&?
Grit
Grit
80
100
&
180
^
400
2
No. 706350
No. 706351
No. 706352
No. 706353
No. 706354
No. 706355
No. 706356
No. 706357
&
&
&
&
&
&
&
&
17.90
17.90
17.90
17.90
17.90
17.90
17.90
17.90
80
100
&
180
^
400
2
No. 706358
No. 706359
No. 706360
No. 706361
No. 706362
No. 706363
No. 706364
No. 706365
_'
"
"
"
_&
_&
_&
_&
56.50
53.90
53.90
53.90
54.40
54.40
54.40
54.40
D `;~\;3;~\{Z]`Z;`
Z\{|<=~;;#Z;
Dimensions 115 x 55 mm
Grit
80
&
^
B KLINGSPOR\<`\Z;
#>= ^2&]7
highly flexible linen backing moulds itself perfectly to even highly profiled workpieces. The dense coating ensures a homogeneous scratch pattern in surface finishing
and a long service life. Suitable for wood, varnish and metal.
Grain: Aluminium oxide, the cotton cloth is highly flexible.
No. 705121
No. 705122
No. 705123
No. 705124
_"
_"
_"
_"
5.70
5.70
5.70
5.70
E \~\;Z;\<`\Z;\{
~Z|=&2#~;;Z;
Ideal for wet or dry, fine and intermediate
sanding of wood or metal surfaces of any
shape. The wavelike distribution of the
sanding particles results in particularly
high efficiency and leaves a uniform
surface pattern. The soft, highly flexible
2
80
&
^
212
No. 704826
No. 704827
No. 704829
No. 704830
No. 704831
_
&'_
&'_
&&'
&&'
26.50
22.30
22.30
25.20
25.20
2
100
&
No. 704835
No. 704837
No. 704838
"2 29.70
^^ 27.40
^^ 27.40
Finishing
Micro-Mesh Abrasive and Polishing Cloth
The finest quality smoothing and polishing material:
Micro-Mesh is excellent for intermediate sanding between coats of paint, retouching and fine finishing work on
wood, plastic, plexiglass and metal surfaces, including polishing, on irregular and curved surfaces in particular.
The abrasive particles are suspended in a silicon matrix firmly bound to a thin, highly flexible textile basis, so
that no residues remain on the finished surface. Micro-Mesh can be used dry, with water, or with petroleum,
and is very long-lasting under normal wear.
Micro-Mesh MM
Micro-Mesh MM was originally developed for polishing hard plastics. As well as
plastics, the fine grits are also ideal for working wood, plexiglass and fibreglass,
right through to polishing varnished surfaces.
MICRO-3;Z33Z|;Z;;
Dimensions &^?'
Grit
Grit
1500
1800
No. 705101
No. 705102
No. 705103
_
_
_
2.70
2.70
2.70
A MICRO-3;Z33\ZZ`3;=
&&#~;;Z; Price advantage
&
&=&'==
^=^2==2='=&=
1 dead-smooth file, 1 grinding block.
No. 705115
24.30
B MICRO-3;Z33~Z|];
Ideal for varnish repairs. Flexible, file
7
^=
2=&
Dimensions &?&
No. 705110
&& 1.80
^
^2
4000
2
8000
&
No. 705104
No. 705105
No. 705106
No. 705107
No. 705108
No. 705109
_
_
_
_
_
_
2.70
2.70
2.70
2.70
2.70
2.70
MICRO-3;Z33\ZZ`3;=
#~;;Z; Price advantage
&=&'=
=^=^2==2='=
&=&
=&
7
No. 705116
^2 43.50
Grit
Grit
1500
1800
No. 705411
No. 705412
No. 705413
&'
&'
&'
2.20
2.20
2.20
&'
&'
&'
&'
&'
&'
2.20
2.20
2.20
2.20
2.20
2.20
Micro-Mesh MX
3
#33
[
smoothing varnished surfaces, working hard materials (metal, stone, hard plastics),
cleaning oxidised or stained surfaces, removing scratches, and for sharpening and
3
?733
C MICRO-3;Z3=_#~;;Z;
|
2&&^22
&
Dimensions &^?'
No. 705481
&_& 17.50
No. 705414
No. 705415
No. 705416
No. 705417
No. 705418
No. 705419
^
^2
4000
2
8000
&
D MICRO 3;Z3=&#~;;Z;
|
'&&&&'
^^22'&
Dimensions &^?'
No. 705117
&"" 23.70
H SANDING BLOCK
Made of foam.
Dimensions 2?2?
No. 705114
&"^
2.30
I
I MICRO GLOSS
POLISH
;
scratches:
Micro Gloss is a waterbased polish containing
aluminium oxide particles
&
polishing acrylic, metal,
wood and hard varnishes.
It completely removes the
visible scratches left by Micro Mesh and
leaves a brilliantly glossy finish.
Does not discolour.
Content 55 g
No. 705482&=&'&
2^ 6.70
213
Finishing
Kirjes-Sanding System
Perfect finish to any shape in
wood:
The quality and perception of any
piece of work is largely influenced
by its finish. Flat surfaces can
easily be finished with a smoothing
plane or sand paper. However concave or convex shapes, the inner
surfaces of rectangles and irregular
A `;ZZ\{|ZZ;3
Complete sanding system including motor, flexible shaft, drum sanding kit set
&=;{{
Nr. 707437
__=^ 329,90
E
B
C
C ];<;Z\]
Highly flexible, equipped with three capsuled ball-bearings and key chuck 0-10
mm. Intended for low-speed use (ca.
^`~3%=?&`3
&^
No. 707433
2_& 79.90
D ;`\`\{;
This extractor handle is made to vacuum
fine saw dust produced with the KirjesSystem right at the point of formation.
The flexible shaft with connection piece
$
#^%
conventional vacuum cleaner.
No. 707434
^^^ 39.90
214
=?^=?^
'=&^=
hand pump.
No. 707435
&" 143.90
Finishing
Oils
A
A Z;ZZ
\3;\
Versatile, light oil
from the seeds of the
camellia tree:
Corrosion protection:
Camellia oil is acid-free, not volatile and
not susceptible to resinification, making
it the ideal oil to protect tools from rust.
Made from pure natural plant products
and food safe, it is especially suited for
the preservation of kitchen knives made
of carbon-steel.
1
Content
E ~~~#Z;;{
Colour-true:
Food safe oil extracted from the seeds of
the white poppy flower (Papaver somniferum) is ideal for fine craftwork objects,
turned parts, toys, kitchen furniture and
kitchen utensils. Because of its good grip
it is suitable for knife and tool handles
and, along with pigments, for making
valuable paint oils and artists colours.
The high transparency of poppy-seed oil
makes it the perfect base for violin varnishes and clear protective wood finishes.
It provides excellent protection against
moisture and dirt, does not yellow, and
penetrates deeply into the wood. Poppyseed oil dries much slower than linseed
oil. Multiple coats of poppy-seed oil yield
a warm, silky gloss and a surface which
is pleasant to the touch. Poppy-seed oil
can be mixed with other vegetable oils
and solvents.
B LINOLJA`|\Z[;{Z
Z;;{={#<;\;{
;7
#
~
#
oxidation makes this oil dry much faster
and slightly bleached.
C RA LINOLJA`|\Z[;{Z
Z;;{=`\[
Untreated linseed oil, a pure natural
product, dries slowly so penetrates deep
into the wood, polishes well.
Content
Content
Content
215
Finishing
1
A ~`;`\|;
Natural diluting and cleaning agent:
Low-viscosity orange oil from the peel
of the sweet orange, ideal for thinning
vegetable-based protective wood oils,
and its grease dissolving properties make
it a useful household cleaner. Mixing
1-5 % of it with a linseed or tung oil
finish markedly improves penetration,
facilitates application and lends these
oils a refreshing aroma. In combination
with carnauba wax or beeswax it can
make a variety of agents for cleaning and
caring for wooden surfaces, antiques and
leather. Orange oil is also suited for use
as aromatic oil.
1
No. 705277 _& "" 11.80
2 1l
No. 705278 2"&
2& 26.90
Waxes
2
B `~;;
Solvent with ethereal aroma:
One of the most valuable solvents on a natural
basis, ideal for thinning
vegetable oils, oil paints
and varnishes as well as
for making glazes and
polishes with resins,
waxes or pigments. This
low-viscosity oil, obtained by double-distilling the resin of the maritime pine tree,
is colourless and has a fresh, ethereal
aroma.
Please observe the normal safety precautions for the use of volatile solvents
containing hydrocarbons.
Content 1 l
No. 705288 &^&
&'2 15.30
Pine Tar
One of the oldest wood preservatives,
ideal as paintwork for houses, shingles,
fences, equipment, sleds and boats.
This wood tar obtained by the pyrolysis
and careful distillation of resin-rich pine
rootstock is moreover the ideal material
for axe and tool handles, because it
lets the wood breathe and improves its
grip. Because of its long drying time, it
penetrates deep into the wood, lends it
a beautiful patina, and gives it lasting
protection against the effects of weather.
The pine tar can be diluted with turpentine oil or linseed oil. Because of its strongly smoky aroma, we only recommend it
for use outdoors.
C ]``\~;\`
Basic protection against UV radiation
and weathering. Suitable for treating
large surfaces (walls, roofs, fences). This
wood tar is pitch black. Due to its high
viscosity, it does not penetrate deeply
into the wood.
D ]`\{;;~;\`
Highest protection against UV radiation and weathering. Suitable for small
surfaces or parts such as doors, window
frames, or tool handles. This wood tar is
dark brown. Due to its low viscosity, it
penetrates very well into the wood.
E {\<`{`\];~;\`
Intensive protection against UV radiation
and weathering. Suitable for treating
large surfaces (walls, roofs, fences). This
wood tar is black. Due to its moderate
viscosity, it penetrates well into the
wood.
Content
Content
Content
untreated
treated
F ~\`\]][\
Colour-true and water-resistant:
Transparent wax for sealing cross-grained
wood surfaces, for application while
turning on a lathe, for mixing with beeswax, as preservative protection for wood
and metals, and for lubricating sliding
;?
=
colourless and odourless, solvent-free
and highly water-resistant.
1000 g
No. 810016 '&
2'" 8.20
G ~`~Z#|`\\;
Refined oils and paints:
Propolis, a plant resin collected by
honey-bees, makes paints and oils
smoother and longer-lasting, and lends
to them an agreeable aroma. With its
disinfecting effect, propolis prevents bacterial or fungal attack without displaying
physiologically questionable side effects.
Ideal for treating wooden parts that contact the skin, such as cooking utensils,
breadboards, sauna and bath furniture,
and childrens toys. The resin offered may
either be directly dissolved in paintwork
or oil or be further processed with highpercentage spirits in a liquid concentration. Recipes are enclosed.
100 g
No. 810012 ^""& ^^^ 39.90
216
H ~`;<;;Z[\|`\\;
Protective and fragrant:
The traditional wood polishing and
preservative agent for hard-wearing
surfaces with a silky gloss. The exudate
of honeybees has been used since time
immemorial for the care and conservation of wood surfaces and as a filler and
adhesive. In its pure form, applied after
7$?_%=#
netrates raw wood surfaces well. Mixing
with oil or alcohol can produce pasty or
liquid polishes or cleaning solutions for
furniture care.
500 g
No. 810006 & & 12.50
1000 g
No. 810007 & &'"& 22.50
I \`\<\[\
The hardest wax:
For particularly wear resistant, glossy
final polishing. Can also be used as a
lubricant for sliding wooden parts and as
corrosion protection for metal surfaces.
The wax of the Brazilian carnauba palm
is distinguished by its great hardness and
good physiological compatibility. The wax
offered is unbleached and has a melting
?"
Suggested recipe for wax polishing paste:
carnauba wax/beeswax/turpentine oil:
&
500 g
No. 810009 '& &&"^ 14.20
1000 g
No. 810010 &"& &2^" 19.50
J
-HOLZBALSAM
[\]`~`;Z;`|[{
Through and through natural:
Contains a high percentage of all-natural
bee wax. HolzBalsam contains pure natural ingredients which preserve the wood.
It is free of chemical substances, mineral
oil derivatives and drying activators. The
ideal natural preserver for toys, kitchen
equipment, turned wooden objects,
wooden furniture, wooden floors, carved
items and all handicraft objects. Valuable
substances out of nature underline the
beauty of a wooden surface with a silky
smooth touch. The pleasant smelling
palm made of ingredients such as bee
wax, carnauba wax, linseed oil, tung oil
and orange oil not only preserves normal
wooden surfaces. It is easily spread
on cork, smooth leather and metal for
protection against moisture.
^
No. 705350 2_& &^_' 16.40
K `;Z#\`\[\
Accentuates the natural beauty of the
wood and protects it from moisture and
contamination. The wax of the common
bearberry (Arctostaphylos uva-ursi) makes
Swedish oil wax one of the top-quality
organic wood preservatives. Further components include beeswax and Swedish
linseed oil. It is free from chemicals and
solvents.
^
No. 705356 _&&
&_" 21.30
When building up coats, please remember the principle soft and hard, e.g. first
a shellac priming, then a tung-oil mixture, and lastly wax.
Finishing
Urushi
Japanese Urushi embodies
the art of varnishing in its
highest form. It is made
from the natural resin of the
Asian tea tree (Rhus vernicifera)
and has been used in Japan to
protect and lend a beautiful
gloss to furniture, bowls, boxes,
handles and jewelry for over
2=
C #]`;;`\[\;`Z
Lower-quality, oil-free lacquer for
intermediate layers in the Nuritate and
Roiro technique. The uncoloured lacquer
is dark brown by nature but can be
coloured with pigments if required. Most
coloured coats are mixed by the painter.
But because of their frequent use, premixed black lacquers have always been
provided by the lacquer manufacturer.
A/B/C/D/E/F
uncoloured
A KI URUSHI
Raw Urushi with a water content of about
base lacquer is suitable for sealing wooden surfaces before applying the lacquer
layers as well as for mixing priming coats
with clay. This lacquer is also required
for mixing a kind of adhesive by adding
rice glue (boiled, mashed rice) for applying layers of textile. Uncoloured.
Content 100 g
No. 716240 ^& '"" 34.50
black
red
FINISHING
Urushi-techniques and products
E \;`Z3;{[
>
?
?
top coats in the Nuritate Urushi technique. Because of the high oil content,
the top coat is not polished in the Nuritate Urushi technique. The uncoloured
lacquer is dark brown by nature but can
be coloured with pigments if required.
Most coloured coats are mixed by the
painter. But because of their frequent
use, pre-mixed black and red lacquers
have always been provided by the lacquer
manufacturer.
D #]`;;\;`Z
These high-quality, oil-free lacquers are
used for hard and shiny top coats in the
Roiro technique. The uncoloured lacquer
is dark brown by nature but can be
coloured with pigments if required. Most
coloured coats are mixed by the painter.
But because of their frequent use, premixed black lacquers have always been
provided by the lacquer manufacturer.
F KIJO-MI URUSHI
Filtered raw lacquer with a high water
?ted for final polishing. In the Roiro technique, this lacquer is used to impregnate
the last Urushi layer. It dries much faster
>
$
?#
hours) and is polished with a mix of
Migakiko polishing powder and camellia
oil. This lacquer is used uncoloured even
on coloured objects. Uncoloured.
Content 50 g
No. 716323 ^'& "^ 111.90
Manufacture:
> #
covering coat.
What is Urushi?
Lacquer tree:
Suri Urushi
Nuritate Urushi
Lacquer production:
To produce Urushi
Characteristics:
trunk. An average of
7
;
7
^<
=
and crafts objects usually have a series of co- time is from June to September.
virtually intact.
217
Finishing
A `Z=~|3;
Very fine, non-fading pigments made
from coloured titanium oxide for making
your own coloured Urushi lacquers.
Uncoloured Urushi lacquers are usually
dark brown after hardening. Some
common colours such as red and black
are also sold ready for use as top coat by
the manufacturer. To create other colours
and dye intermediate layers, you mix
a maximum of 40% pigments with the
individual lacquer mixtures you are applying, depending on the colour intensity
you want. Please note that the higher the
pigment content in the lacquer, the
1
2
3
4
5
^
^
^
^
^
27.90
27.90
27.90
27.90
27.90
C \3`~Z|~\Z;
For Roiro Urushi Technique:
A polishing
paste of soda
lye, wax and
pigments
that is used
in the final
stage of the
Roiro Urushi technique. The smoothly
7
layer is polished using a soft cloth with
polishing paste applied. Then the surface
is impregnated several times with Kijo-mi
D 3|\~Z|~[{;`
For Roiro Urushi Technique:
Fine mineral powder for the final
polishing of Roiro Urushi lacquers. The
powder is used together with oil (e.g. camellia oil) for polishing the dried Kijo-mi
Urushi impregnation.
Weight 180 g
No. 716366 ^&_& '22 57.90
E `Z<`Z=`{\Z\;
Hand-made specialised brushes with a
V-shaped head for even application of
Urushi top coats. In the manufacturing
process, fine Japanese hair is glued
together and embedded in a cedar wood
shaft. After use, the brush must be
rinsed thoroughly in turpentine oil.
Overall length
Width
1
B CLAY
Clay is an important component of the
priming coat in the Urushi covering
techniques. The priming buffers the movement of the base material and allows
an optimum bond with the subsequent
lacquer layers.
1 Clay, Jinoko
The fine Jinoko clay consists mainly of
marine sediments (kieselguhr) and, after
mining and drying, is baked in a furnace
before being crushed. It is used for the
first priming layers.
Content 500 g
No. 716360 '& &'' 22.40
2 Clay, Tonoko
Tonoko is a
coarser clay
from specific
regions and
consists
mainly of
aluminium
silicate.
Unlike Jinoko
clay, it is not
baked and is mainly used for the final
priming layers.
Content 500 g
No. 716362 &&
'"" 10.70
15 mm No. 716370
No. 716371
^ No. 716372
62.50
_ 89.30
_" 94.60
G
G ~\Z~];]`3|
Plastic putty knife for mixing simple Urushi lacquers (Urushi and turpentine oil),
e.g. for the Suri Urushi technique.
Overall length 185 mm
Width 40 mm
No. 716308
^' 3.90
F [{;~];]`3|
This putty knife of hard to find chishabera wood is used for mixing diluted Urushi
lacquers (Urushi and turpentine oil).
This wood is relatively inflexible and thus
particularly suitable for putty knives used
for mixing.
Overall length ^&
Width 45 mm
No. 716312
&^^2 15.90
H [{;~];
FOR APPLYING
Putty knives used for applying Urushi
primer layers (Sabi) are made of hinoki
(Japanese cypress) wood. These light knives are highly flexible and easily adjust
to round surfaces of bowls.
Overall length "
Width 45 mm
No. 716311
"2 5.90
Techniques:
7
#>
]= Coating procedure:
{
Z
_&2^2
(The dilution is reduced with each coat
www.more-than-tools.de
Suri Urushi
metallic dust or
Uses:
chips. A variety
7
$
of techniques are
_&2^_
7>
the pores.
for beginners and are therefore only practised ckier. But you can also coat smaller items of
#%
slightly darker.
218
Finishing
Grit
1
2
3
4
5
6
~
P 400
P 800
P 1500
~
~^
B ~Z|~\~;`=&#~;;Z;
For Suri Urushi
technique:
This polishing
paper is used
in the Suri
Urushi
technique for
rubbing a
layer of Urushi into the wood structure
after applying it with a brush. Before use,
the paper is crumpled up and unfolded
again to create many polishing contact
points and unstiffen the paper.
&?"
No. 716307
^ 4.10
Charcoal Sumi
Traditionally, Sumi charcoal from
special types or parts of trees is
used with water for sanding the
intermediate layers of lacquer. Only
old, well-seasoned wood is used for
the charcoal. The complex process
in the furnace, during which the
wood must not burn up, usually
takes two full days.
D CHARCOAL SUMI,
Z`|\Z3]`;`3;{\;
SANDING OF URUSHI
Softer charcoal from the wood of the
tung oil tree that is specially used for
intermediate sanding of the Naka Nuri
layer (intermediate layer).
Weight 100 g
No. 716321
'_ 69.90
F Z``ZZ;]`<;|;`Z
This set is ideal for beginners to learn
the Suri Urushi surface technique. The
natural, transparent but darkening lacquer is extremely easy-care and yet highly resistant to alcohol and water. The set
contains all the tools and implements
you need to turn the ash wood bowl
provided into an artistic item of daily
use. The lacquer is enough for two more
objects of this size. Instruction manual
SURI-URUSHI
This DVD guides you through the SuriUrushi technique, from general basic
knowledge right through to the actual
application. The traditional Japanese
>
2=
old. Learn how to create a special gloss
on bowls, boxes, handles, jewellery or
furniture. Once fully hardened, Urushi is
resistant to water, heat, alcohol, acids,
alkaline solutions and solvents as well as
ageing. It is also food-safe.
Subtitles in English and German.
{{=2Language: Japanese.
No. 713807
2& 26.90
G ];`~\~;`3Z|\3=
&#~;;Z;
This filter
paper is used
to filter expensive lacquers
before use or
after adding
pigments, to
avoid lumps and impurities in the
lacquer later. To use it, you lay several
sheets of paper (5-10) on top of each
other and pour in the lacquer. Then you
wring out the paper. The thin and tearproof chemical paper fibres are based on
the mulberry tree fibres that were used
in the past but are hardly used today
because of their high price.
?^
No. 716313
^_' 4.50
2
H BOWL BLANKS
Beautiful ash bowl blanks which you
can sand and surface-treat as you wish.
The livley wood structure is particularly
emphasised when treated with the Suri
Urushi lacquer technique.
I ~[;`\|;Z
Developed for lacquer manufacturers,
these solvent-resistant nitrile gloves
provide optimum protection from
paint, lacquer, oil and detergents. The
rubber-like material nitrile has excellent
chemical and mechanical properties and
an unequalled sense of touch. A diamond
finish ensures a secure grip.
Size
M
L
No. 707912
No. 707913
No. 707914
__
__
__
3.30
3.30
3.30
219
Finishing
Resins
Shellac
The consummate surface technique:
French polishing is an incomparable way of bringing out the beauty of
the wood. It creates a mechanically wear-resistant, physiologically compatible surface that does not become brittle and is of constant colour.
The resin, an exudate of a scale insect, has been known since time
immemorial as one of the best materials for making clear wood finishes.
A \Z`\Z;\
Bleached, highly transparent shellac,
for clear polishes.
No. 810030 _2& & 11.90
1 kg
No. 810031 "& ^__^ 44.90
B 3;Z;\
Orange-coloured shellac for polishes that
display a slight tinge.
No. 810034 '&
'"" 10.70
1 kg
No. 810035 ^_"& ^&' 37.90
C Z~;``Z;\
Reddish shellac for polishing with marked
toning and for accentuating the grain.
No. 810037 ^2&
"&2 10.90
1 kg
No. 810038 ^2"& ^&& 36.90
Z;\Z\3\|`;
INTRODUCTION TO
]`;
POLISHING
In this training
film, an expert
shares with us the
knowledge of the
finest form of surface treatment as
acquired by him over many years. Peter
Zehmisch explains the materials and
the individual operations (priming, basic
polishing, cover polishing, polishing out
scratches, and fine polishing).
{{=&
No. 713753
&' 12.90
<
= >
accommodate their many eggs, increase production of lac resin and wax. in 14 weeks,
- The larvae emerge from the broodlac and
7
known as sticklac, which is the basis of shel-
is wax.
friendliness.
7 &2
hatch and settle on the tender, fresh twigs of
certain trees. each larva inserts its proboscis
Female
Larvae
Broodlac
Laccifer lacca
Drawing: Sara Krause
220
Finishing
How it is harvested
expensive since it contains very little red dye, 7= =
7
=
The molten shellac is scraped off and dollops in alcohol more slowly, and some of it will
placed onto a galvanized iron sheet, forming
the can.
ways.
221
Finishing
A <;
Captivating aroma:
Benzoin processed into paint is traditionally used as a glossy polished covering
on shellac surfaces or high-quality oilvarnished surfaces. The pure benzoin almond offered here is obtained by cutting
into the bark of Siamese Styrax trees and
removing the exuded and hardened resin.
Benzoin is an aromatic resin of medium
hardness. Because of its agreeable,
vanilla-like aroma, it is also used in the
manufacture of perfumes, aromatic oils,
incense and ointments.
Weight 100 g Granulate
No. 810023 _&
2 7.40
<;`];<;\{|
Sam Allen:
Classic techniques
and recipes. Surface
treatment not only
makes wood easy to
care for, it also enhances its beauty. Sam
Allen provides all the
comprehensive and
very practical traditional methods, such
as French polishing, painting, oiling and
waxing, grinding, pickling and varnishing.
&'=
=&2
#
=&?In German.
Nr. 713739
""& 32.00
B NATURAL FINISHING
Z~~;ZZ\`;`=
&&#~;;Z; Price advantage
Basic set with great
price advantage consisting
of natural oils, waxes
and resins for mixing your
own finishes. Delivered
with a French flat oil
brush for easy application.
Contents:
= $__%&
=
= $_'2%&
=
$_''%&
=
~
7?$'&2%
== \
$'&%&=
~
$___%=
$'&^%
Z= $_'%&= Carnauba wax (810009) 500 g,
< $'&^%&=
] 7
$_2&'&%=
No. 705299
" 110.00
C ~3;~[{;`
Fine polishing powder for intermediate
grinding, e.g. in French polishing or as a
pore filler (is transparent with shellac).
Pure silicate rocks. Applied with water or
liquid paraffin.
Weight
No. 810050&&
&' 2.60
D Z[;{Z`;{=
`#{;~|3;
The classic wood preserving paint:
It determines the appearance of the
landscape of Sweden: The warm, russet
colour of the wooden facades of the
barns, houses and churches is also an
effective wood preservative.
G
F
E ]`;]\<`Z
#
7
shop in France for high absorption
capacity, shape stability and even flow.
The hand-sorted Chungking bristles
with uncut, naturally split ends ensure
a high capillary effect and form a dense
brush head which allows a controlled
flow. Slightly dome-shaped head for even
application without overlapping. Nickelplated ferrules, stained beech handle.
Overall length
Width 50 mm
No. 706181
_2 9.00
222
F Z``;\`<`Z
For applying shellac, fine oil varnishes
and watercolours. Best quality, made
from the tail hairs of Siberian squirrels.
Overall length &'@&"
Width
1
2
3
4
&^
^'
50 mm
G ~Z|\{;\|]\<`
Ideal material for a rubbing pad for
French polishing as well as for cleaning,
polishing and the careful packing of sensitive parts. Finely woven tubular fabric
made of tough, lint-free, terry-cloth-like
cotton, does not fluff.
Overall length
No. 810008
^^^ 39.90
Finishing
Bindan glues
D
G
A ;<{|;`|\
For strong bonds in wood, laminates,
particle board, leather, horn, bone,
mother-of-pearl, cloth and porous
materials for interior use. Bond strength
usually stronger than that of the material
itself, resistant to most solvents, can be
varnished and is easy to sand without
7
;?7
cleaned up with water. Non-toxic and
solvent-free. Assembly time after glue
application approx. 5 minutes. The dried
glue joint is yellowish and transparent.
Can be softened again by heating.
Technical Notes: Aliphatic resin emulsion
glue. Application and storage temperature 10-30C. Clamping time 30-60
minutes. Attains maximum hardness
after 24 hours. Can be thinned up to 5%
with water. Storage life 12 months.
^_
No. 450360 _&
&^ 6.10
"2
No. 450361&2_& &^' 15.80
^_'
No. 450369 &2& ^^'_ 40.30
C ;<{|;~`;33
For high strength waterproof bonds.
Suitable for exterior use (exterior doors,
garden furniture etc). Bond strength
usually stronger than that of the material
itself, resistant to most solvents, can be
varnished and is easy to sand without
7
;?7
cleaned up with water. Non-toxic and
solvent-free. Assembly time after glue
application approx. 5 minutes. The dried
glue joint is yellowish and transparent.
Can be softened again by heating.
Technical Notes: Polyvinyl acetate glue.
Application and storage temperature
10-30C. Clamping time 30-60 minutes.
Attains maximum hardness after 24
hours. Can be thinned up to 5% with
water. Storage life 12 months.
^_
No. 450364 ^&2&
2^ 7.50
"2
No. 450365 &""'& &'' 18.90
D ;<{{;|;
Liquid hide glue for high strength, hard
bonds. No creep, excellent sandability
and can be overpainted. Its sensitivity
to moisture allows for easy disassembly
of parts, making this glue particularly
well suited for restorations and musical
instrument making. Long setting time,
assembly time after glue application
approx. 10 minutes. The dried glue joint
is transparent.
Technical Notes: Glutine glue with additives. Not for exterior use or use on objects
which come in contact with food. Application and storage temperature 10-30C.
Clamping time 30-60 minutes. Attains
maximum hardness after 24 hours. Can
be thinned with water.
Storage life 12 months.
^_
No. 450368 2&
"&2 10.90
G BINDAN-P[{|;
~`~;;`|;
High-quality, ready-to-use synthetic
resin glue with outstanding power of
adhesion. For wood, wooden materials,
cardboard, polystyrene foam, felt, fabrics
and leather. Waterproof in accordance
<^=
?&=
formaldehyde-free, solvent-free.
Weight 800 g
No. 450383 &_& &" 12.60
H DUO-3<{;~|;
Glues almost everything:
Quick-setting, transparent two-component epoxy resin adhesive. Bonds metal,
wood, glass, hard plastics, bakelite, porcelain, ivory and precious stones, among
other things, in 5-10 minutes. Resistant
to water and chemicals. Double injector.
Weight _
No. 450381 ^_&
"" 11.80
B
E
F
I
1
B ;<{|;3\;
;?
#
=7
strength and an application time of at
least 10 minutes make it the perfect glue
for demanding applications. For both
interior and exterior use, dries to a nontoxic, light brown glue joint.
Technical Notes: Polymer glue (not for
underwater use), application and storage
temperature 5-30C. Clamping time approx. 30-60 minutes, maximum hardness
after 24 hours. Storage life 12 months.
^_
No. 450362 ^"_&
_" 9.40
"2
No. 450363 2^& &"' 23.30
E ;<{~|;
High-strength, water-proof, all-purpose
constructional glue. Besides wood-wood
joins, will bond almost any combination
of porous or solid materials (metals, ceramic, plastics, stone etc). Very hard bond,
dries to a yellow film, fills gaps, easy to
sand, solvent-free, chemically stable,
Technical Notes: Polyurethane glue
contains isocyanate (avoid skin contact),
and hardens by absorbing water (not for
underwater applications), application and
storage temperature 10-30C. Clamping
time approx. 45 minutes, maximum
hardness after 4 hours.
Storage life 12 months.
^_
No. 450366 2& &^ 14.70
F ;<{
Z\{<{[{\{;Z;
Fast-action glue for small contact surfaces with a narrow joining gap especially
for glueing together wood and wood
composites. But other materials such
as natural rubber, aluminium, stainless
steel, fibreglass, PVC or porcelain can
also be easily glued together or to wood
and composites. The individual types
differ in viscosity and hardening time.
High ageing resistance.
Technical Notes: Cyanoacrylate glue.
Application time 7-30 seconds, clamping
time 30-60 seconds, maximum hardness
after 8 hours. Storage life 2 years.
Weight 55 g
Viscosity
1 Gel
No. 450377 &'& &&&' 13.30
2 Thick
No. 450376 &'& &&&' 13.30
3 Medium
No. 450375 &'& &&&' 13.30
Accessories for glueing
and finishing can be found online
at www.more-than-tools.de
223
Finishing
Herdim Glue Pot
A |;;`=^#~;;Z;
For the specific application of glue to
points of difficult access, e.g. in repairs
of veneering or chair-leg bonds, cracks
etc. Also ideal for the application of oil
or for the dosage of paints and other
liquids. Can be dismantled for cleaning.
^#~Z &=
2_
No. 716232
2^ 6.70
;?
{3}
Water-jacketed glue pots for the
uncomplicated heating of hot-setting adhesives, priming and waxes.
A built-in thermostat ensures the
#^
Designed for constant professional
N
I
2
1
I ~\Z|;~
Asymmetrical, double-chambered con
=&^=
heating glue and water (for thinning
purposes). Made of polypropylene; tough,
heat resistant and chemically neutral.
N |;<`Z
Natural bristles, wrapped in corrosionfree string to prevent discolouration of
the glue. Overall length @
Head
Capacity
B ;;;`\~;=3
This veneer tape is for taping together
veneer into a single sheet, as a safeguard
against slippage and for marquetry work.
Three hole tape, offering both visibility
through the holes and easy application
to round and hollow surfaces. Tape can
be easily removed with scraper or sand
[
No. 450138 ^&
' 6.90
4.50
5.90
1
2
3
4
14 mm
&2
18 mm
&
9.90
9.90
J
2
Natural Glues
Glues of animal origin are simple to
use, resist aging, can be softened
again by heating, which makes
them very useful for repairs. In
contrast to synthetic glues, they
can be overpainted and pickled.
1
1
J |;\;`]`|;~=
|\ZZ=
1 No. 736005
& 14.90
2 Glass lid with brush-hole
No. 736012
&&2 13.40
C
C <;|;=|`\\
For hard bonds, very easy to sand.
No. 450141 &&
" 3.50
1000 g
No. 450144 '&
2_ 8.00
10 kg
No. 450156 2"&
_"' 69.00
K
G ;`{3|;~Z=&&
Compact glue pot for violin making and
other precision small scale work.
105 mm, &2=&[
Ceramic
No. 736002
&'_ 177.00
Plastic, with Lid
No. 736014
&^' 173.00
D
D {;|;=|`\\;
For elastic bonds.
No. 450140 &"2&
& 4.90
1000 g
No. 450143&&&
"22 11.50
Width
;`\3|;\;`
Capacity
1l
No. 736000
No. 736009
'_ 9.60
&2_ 19.60
1
2
3
4
2
11 mm
14 mm
^
L |;\;`=
Z\;ZZZ;;=
No. 736006
'' 10.50
E `\<<Z|;=|`\\;
More viscous than either hide or bone
glue. High yield, very elastic.
500 g
No. 450153 &^2&
_& 6.80
1000 g
No. 450154 &_& &2_ 12.70
1
F
224
F Z|\ZZ|;=|`\\;
For difficult repairs requiring highest bond
strengths. The glue itself consists of the
air bladders of sturgeons. In recent years,
the drastically reduced fishing quotas have
made this glue a precious commodity.
100 g
No. 450142 _'& '_ 57.80
O {;<\Z|;<`Z
Made from linden bast fibres absolutely
free of fat, ideal for the application
of hot-setting adhesives, pickling and
cleaning glue joints. The bast bristles
are stiff, very resistant to wear and can
be shaped using a chisel for very precise
application of the glue. When the head
becomes worn, new bristles can be
produced by progressively hammering
apart the linden fibres further down the
handle.
Overall length &
H ;`{3|;~=~\Z\;`[{=&=
For large-scale projects such as restoration, piano making, painting, stucco and
gilding. Includes plastic glue container
&2==
[
No. 736003
' 248.00
P ]`;|;<`Z
The split-ended, uncut bristles give
M Z~`\3~[{\`;|\` these brushes excellent capillary power.
^
Handmade using natural bristles from
|
=&
=7
?#^
free-range hogs. Corrosion-free string
Can be set upright or at an angle due to its wrapping.
Overall length '@^
` 2=
Head
with cap.
No. 706013
&" 13.00 1 4 mm No. 706130 ^2& 4.30
Replacement wick, 15 cm
2 2 No. 706131 ^_ 4.40
No. 706014
&" 1.30 3 8 mm No. 706132 5.00
4 10 mm No. 706133 " 6.30
Leather | 232
Horn | 234
Steels | 236
225
Materials
;
[
A {;[{
The linden tree is not only a tree of
myths, fidelity and love (Freya, goddess
of fertility lived in one), its also one
of the carvers favourite woods. Its soft
wood and uniform cell structure allows it
to be easily worked by hand.
D [{;3;;
Hard, dense heartwood with a lively grain
for turning and carving, for knife handles
or inlay work. The natural oil content
makes it particularly resistant to water
and soiling.
D
A
G 3\Z`<`=~`;33\
|]|`;{
The contrast between the light-coloured
heartwood and dramatic dark-coloured
rays running through the wood have
made Masur birch wood from the polar
regions highly sought after by carvers and
wood turners alike. Masur birch is both
highly wear resistant and warm to the
touch, making it the perfect choice for
exquisite knife and tool handles, kitchen
utensils, decorative objects, intarsia and
small bowls. Air dried pieces, specially
selected for their lively grain patterns.
J ]`;<[{
Boxwood is the wood turners dream
come true - it has a very fine grain, is
rigid but easy to work, finishes well and
takes on a beautiful polish. Perfect for
making bowls, figurines, handles, balls,
mechanical parts - the possibilities are limited only by the size of the blank. Large
pieces of this slow-growing wood are very
rare. Harvested in the French Pyrenees.
1
Dimensions
^?&?'
No. 831288
22
7.90
&??
No. 831263
^&&
3.70
&?^'?^'
No. 831165
_&
6.80
^?&^?"
No. 831109
_'
8.90
^?^'?^'
No. 831166
400 x 100 x 80 mm
No. 831289
"&2 10.90
^'?^'?^'
No. 831264
?&^?&^
No. 831110
&2_ 19.90
Lindenwood Board, 1. Quality
For carving and
chip-carving.
Dimensions ?&_?
No. 831103
22
150 x 150 x 50 mm
No. 831167
&&2 13.40
& 17.90
2& 26.90
&??^
No. 831325
& 18.50
&??^
No. 831327
&'"& 22.50
7.90
2
^?&^?"
No. R831109
&^
Diameter 50 - 75 mm
5 kg
No. 520081 &^"'& '_ 69.90
10 kg
No. 520082 &"& "&2 109.00
E Z\;[{
Slow growing wood of the Sicilian olive
tree with attractive grain. Due to its very
high density and excellent polishability,
it is suitable for making everyday pieces
and jewellery of high aesthetic value
and wear-resistance. The cuts on offer
are relatively fresh and therefore have
to be processed under controlled drying
conditions (instructions included).
&??^
No. 831326
"_ 11.60
&??^
No. 831328
&_2 12.80
??
No. 831329
"&2 34.70
6.10
?&^?&^
No. R831110
&2_ 12.70
K <[{\ZZ`3;=|
Top-quality boxwood, air-dried for at
^
=
\
assortment contains several 19 x 19 to
^'?^'>
=&#^
=
#2
Weight 4.5 kg
No. 520038 &^^& 22 55.50
E
H
B
B {;[{]]Z=_|
Various pieces of dried lindenwood,
suitable for smaller carving projects and
chip-carving.
No. 831138 2& &2_ 19.90
C
Dimensions
&?^?^
No. 831135
2_
7.70
&?^'?^'
No. 831187
_^
8.60
^?^'?^'
No. 831105
&^&" 15.70
^?2?2
No. 831106
&"^^ 23.00
H <``;[{=\{;Z\;Z
Wood harvested from the root stock
of the French wild briar tree has been
sought after by pipe makers for centuries
due to its beautifully figured grain and
high resistance to heat. Its unique
appearance and excellent polishing
qualities also make it great for making
jewellery, intarsia and knife handles.
Dimensions "?^?2
No. 831259
&' 12.00
F
I
C {;[{<\`{Z=#~;;Z;
Close-grained and of uniform cell structure are these boards of much soughtafter native Lindenwood. For carving,
chip-carving, printing blocks and toys.
Dimensions ^?&^#?
No. 831178
&_& 17.50
226
F ;[{]]Z=|
A random assortment of beautifully
grained pieces of olivewood in irregular
sizes, some of which have slight defects
and cracks. Suitable for small carvings,
turned pieces, jewellery, knife handles or
inlay work.
Weight 4.5 kg
No. 831131 '& ^ 36.00
I ~;`|`\;{=
[{~;<<;Z
The wood obtained from the French juniper is fascinating, not just because of its
wild-grown structure but also its enduring
aromatic fragrance. The water-repellant
and skin-friendly wood is ideal for
handle shells for knives. The oval wood
pebbles can be used as air fresheners
in rooms or cupboards, where they also
keep out moths. Approx. 50 mm.
approx. 50 mm
No. 831341
&2& 15.00
Boxwood
Materials
A [{`|\ZZ`3;
From western precious wood:
Fine-quality, dry blanks for the beginning
turner. Cylindrical blanks of different
thicknesses and diameters, with waxed
end grains. The bags contain a random
;
$
=
maple, pear, ash, elm, acacia etc.).
Weight 3 kg
Rounds 80-180 mm
No. 831015 22^& &2_ 19.90
Weight 6 kg
` '#
No. 831016 2'& ^^_ 40.90
D |`;\{
With a bulk density of up to 1400 kg/m^,
the dark brown to black heartwood is
one of the hardest, densest and durable
woods that nature can offer. Grenadill is
easy to polish and is particularly suitable
for small, high-grade turned or carved
workpieces.
F PINK IVORY
Pink Ivory (Berchemia zeyheri) is one of
the most magnificent coloured woods,
with a spectrum ranging from bright pink
;?
$""%
with the finest pore structure, it takes on
a fine polish and is ideal for creating exquisite pieces of jewellery, knife handles
and turned pieces.
;? [
B ;<
;7 =
=
in the world, is often used in turnery,
cabinet making, restoration work and
instrument making for parts which need
to either be particularly beautiful or resistant to wear, e.g. keys, furniture and tool
handles, jewellery, bowls and intarsia.
;7 ?
its fine-pored structure.
H <;
Bocote (Mexico Rosewood) is a decorative hardwood from South America of
light brown colour with dark brown veins.
Due to the high oil content, this wood is
perfect for turning and polishes very well.
{
?&&
Dimensions
Dimensions
&??
No. 831265
^'_
4.60
&??
No. 831139
^_'
4.50
&??
No. 831267
^
4.10
Dimensions
&?^'?^'
No. 831168
_'
8.90
&?^'?^'
No. 831144
"' 10.80
&?^'?^'
No. 831268
2
5.50
^?^'?^'
No. 831169
&2_ 19.90
^?^'?^'
No. 831260
&^ 16.70
^??
No. 831075
& 12.40
^'?^'?^'
No. 831266
&' 21.70
^'?^'?^'
No. 831145
&2^ 19.40
^??
No. 831182
&2_ 19.60
^"& 46.90
&?&?
No. 831087
^&& 36.90
150 x 150 x 50 mm
No. 831076
2^" 31.40
150 x 150 x 50 mm
No. 831171
^'' 46.20
^??&
No. 831021
^?^'?^'
No. 831140
?_?'
No. 831022
__^
Dimensions
9.20
&^2& 16.20
& 17.20
150 x 150 x 50 mm
No. 831170
C ;<\ZZ`3;=|
Heartwood ranging in colour from jet
black to slightly striped. A typical selec &"?&" ^'?^'
>
=&#=&#
&#
All the pieces have waxed ends and are
virtually free of cracks.
Weight 4.5 kg
No. 831020 &_& _& 56.10
E `Z;[{
Rosewood has always been prized as
one of the finest woods, coveted equally
by turners, wood sculptors and musical
instrument makers. Its pink-to-crimson
annual growth rings bordered by dark
brown veins are visually striking. High
density (850 kg/m^), load-bearing,
aromatic, polishes well.
Dimensions
?_?'
No. 831029
150 x 150 x 50 mm
No. 831143
G COCOBOLO
Cocobolo is one of the most magnificent
precious woods with its deep red heartwood striped with dark brown/black veins
and a slightly wavy grain. Despite its
strength, it is an excellent turning wood
that produces wonderful surfaces. Used
for woodwind instruments, handles, and
jewellery, for inlay work and much more.
{
?&&
H 3~\;
Brownish red to violet hued, high density heartwood from South Africa. The
narrow-ringed, evenly-grained wood is
characterised by a fine dark brown veining and light brown to green sapwood.
Dimensions
Dimensions
9.50
&??
No. 831248
&
4.90
&??
No. 831261
3.00
_& 29.40
&?^'?^'
No. 831249
_&
6.80
&?^'?^'
No. 831162
_&
5.60
^?^'?^'
No. 831077
& 11.90
^?^'?^'
No. 831163
& 12.20
^??
No. 831079
&'' 18.90
^'?^'?^'
No. 831262
&^ 16.00
150 x 150 x 50 mm
No. 831078
&^ 29.90
150 x 150 x 50 mm
No. 831164
&2 25.30
_"'
227
Materials
Red Mallee
Lace Sheoak
Figured Jarrah
|
3
Z
A \Z\[{Z\3~;Z;
found primarily in Asia: Champac,
boxwood, cedar, rubberwood, maple,
silverwood, gamari, pine, mango, haldu,
mahogany, toonwood, badam, jackfruit,
teak, coconut palm, padauk, ebony, rosewood, sisham and laurel. Polished on one
~
?'??^
No. 831010
&' 12.90
B \Z`\\~`;Z[{=
<[<\Z\ZZ`3;
A random selection of colourful Australian hardwood blanks for turning shallow
bowls. Waxed end grain, virtually crackfree. The selection can include such
woods as red mallee, sheoak, goldfield,
lace sheoak, figured jarrah and mulga.
Weight 5 kg
Dimensions
&?&?
No. 831115 &2& 2&&' 72.80
Weight 10 kg
??'
^?^?
No. 831116 &'& & 145.80
C \Z`\\~`;Z[{=
Z\`;3<;`
Blanks for making high-quality knife
handles, turnery and decorative objects.
Sealed end grain, virtually crack-free.
Dimensions ^??
Wood type
Red Mallee
Lace Sheoak
Fig. Jarrah
|
Mulga
Sheoak
No. 831120
No. 831121
No. 831122
No. 831123
No. 831124
No. 831134
"22
&_2
2
_2
&_^"
35.30
25.90
23.80
31.20
24.70
20.70
D \Z`\\~`;Z[{=
GRAIN WOOD OFFCUTS, 5 KG BAG
A random assortment of beautifully
grained, colourful Australian hardwood
pieces such as jarrah, goldfield, sheoak,
mulga etc. in irregular sizes, some of
which have attached bark, slight defects
or cracks. Suitable for small carvings,
turned pieces, jewellery, knife handles or
inlay work. Price per bag.
Weight 5 kg
No. 831132'&
^ 27.90
Wood type
Red Mallee
Lace Sheoak
Fig. Jarrah
|
Mulga
Sheoak
G PALMWOOD
Its distinctive grain structure makes palmwood a
difficult material to work
with. But its dark-brown
clusters of fibre set in
the light heartwood give
it an extremely vibrant appearance,
making it desirable for knife handles and
ornaments.
H {;Z;``[{
Because of its slow growth, desert
ironwood is one of the hardest and
densest woods in the world. It is golden
brown with dark streaks and a yellowish
sapwood and grows predominantly in the
deserts of Arizona and California, USA as
well as Mexico. It polishes extremely well
and is hard and durable, making it ideal
for knife handles.
Dimensions
Dimensions
Dimensions
"?^?2
No. 831150
&?^?
No. 831151
&?^?^
No. 831152
_^"
8.80
_2 24.70
"'^ 35.50
100 x 100 x 50 mm
No. 831280
&?^'?^'
No. 831277
^?^'?^'
No. 831278
& 14.90
&
&??^
No. 831269
'& 33.50
228
I [;|;
This tropical wood from West Africa has
a light brown core, which takes on a
coffee-coloured hue when dry. The richly
contrasting, coarse light/dark structure,
usually combined with irregular or
interlocked grain, gives wenge its exceptionally decorative character. The hard
and heavy wood is used for high-quality
interior design furnishings and fittings,
but also for turning and carving. Density
'2
Dimensions
&??
No. 831366
2"
3.20
&?^'?^'
No. 831367
&
6.20
6.20
&' 12.90
E \Z`\\~`;Z[{=
Z\`;{3<;`\ZZ`3;=
5 KG BAG
A random selection of precious woods
in fantastic colours and grain patterns.
Sealed end grain, virtually crack-free.
The selection can include such woods
as red mallee, sheoak, goldfield, lace
sheoak, figured jarrah and mulga. From
&"?&"=&@^
Weight 5 kg
No. 8311172& '2 103.00
Dimensions &??^
F Z\;[{
Snakewood (also known as Amourette),
is one of the most decorative and
hardest woods in the world. It is called
snakewood because of the wavy, almost
scale-like appearance of its grain, which
is very similar to snakeskin. Perfect for
making extraordinary jewellery, knife
handles and turnery.
^?^'?^'
No. 831368
& 11.90
^'?^'?^'
No. 831369
&_ 14.60
150 x 150 x 50 mm
No. 831370
&' 21.90
Materials
A ~`~;;\`
Purpleheart is also known as Violetwood
or Amaranth. The heartwood has a natural rich purple to violet colour with an
irregular grain structure. The fine texture
is shot through with lighter and darker
fibres. It is ideal for knife handles and
smallish objects or for woodturning.
{
?'
Dimensions
&?^'?^'
No. 831372
^&&
B Z\|;`\|;
The golden-yellow to orange wood has a
very fine wood structure with shimmering hues. The tree was given its name
because of its natural occurrence in the
settlement area of the North American
Indian tribe the Osage. Because of its
low shrinkage and high elasticity, the
wood was used already then for making
bows, but is also ideal for woodturning
and for knife handles.
{
?'
Dimensions
3.70
Dimensions
^?^'?^'
No. 831373
150 x 150 x 50 mm
No. 831374
7.50
&??
No. 831344
&2_ 19.90
&?^'?^'
No. 831345
2^
C `;{;\`
The incomparable shades of colour
with partly purple and golden brown
streaks make this intensive blazing red
wood, also called Chakte Kok, especially
attractive. To retain its rich hues, the
hard, fine-pored wood should be treated
with UV surface protection. Very easy to
work. Can be used for objects, turning or
carving wood.
{
?_
^?^'?^'
No. 831346
^
"2
&?^'?^'
No. 831376
^'
3.90
^?^'?^'
No. 831377
_&
8.50
2.80
5.90
?^'?^'
No. 831378
&_2 12.80
150 x 150 x 50 mm
No. 831379
&'"" 22.60
"&2 10.90
3;`3\;
Christoph Richter:
This book
teaches you
how to tell
the inner
composition
of trees from
their external
form and
identify the
causes of specific characteristics of wood
- essential knowledge for foresters, wood
engineers and wood buyers. But it will
also help the wookworking professions
such as turners and cabinetmakers to
select the right wood and find unusual
grains. The book explains wood characteristics, imperfections and shake by
comparing photos, and discusses how
they arise and how to avoid them. The
photos show, for example, the bark structure or shape of the tree and the grains
or imperfections that might occur inside
the cut product.
^~=
=
photographs and illustrations,
^?&In German.
No. 713453
^_" 39.90
1
D Z\<Z;{Z~\;{3\~;[{
The spalted maple wood has an intensive
pattern caused by fungal infestation.
Dimensions &??^
No. 831177
^^^ 39.90
G Z\<Z;{[\<`
From roots or burls. Fascinates with its
extraordinary pattern.
Dimensions &??^
No. 831270
^&& 36.90
J Z\<Z;{
`;{~\3`\$`;{~\3[{%
The stabilisation process homogenises
the grain structure of the palmwood,
which is otherwise difficult to work with,
and thus makes it a good working material. Dimensions &??^
No. 831285
^&& 36.90
2
E Z\<Z;{Z~\;{<`[{
Spalted birchwood with intensive pattern
caused by fungal infestation.
Dimensions &??^
No. 831176
2'" 32.00
H Z\<Z;{~\3[{
Cross-section profiles that are stabilised
with resin, which emphasises the beautiful structure.
Dimensions &?^?^
No. 831342
^&_ 35.90
K Z\<Z;{\;[{
Highly decorative wood from South
America with a unique structure in the
radial cut.
Dimensions &??^
No. 831284
^&& 36.90
M Z\<Z;{~;<\Z
3
These stabilised pen blanks made from
cross-cut poplar can easily be turned
into small objects. The different colours
create unique patterns.
Dimensions &??
Colour
F Z\<Z;{Z~\;{<;;[{
Spalted beechwood with an intensive
pattern caused by fungal infestation.
Dimensions &??^
No. 831283
2'& 31.90
I Z\<Z;{3;`;;<`
From roots or burls. Fascinates with an
extraordinary pattern.
Dimensions &??^
No. 831271
^&& 36.90
L Z\<Z;{<|\<
Bog oak wood comes from oak logs that
lay airtight under sand or mud in bogs for
thousands of years.
Dimensions &??^
No. 831175
^&& 36.90
1 red / blue
No. 831272
2 green / yellow
No. 831273
3 anthracite
No. 831274
'&
9.70
'&
9.70
'&
9.70
229
Materials
A ~\\[{\{;Z\;Z, PAIR
Pakka wood is the collective term for
impregnated veneers which are laminated
under high pressure. If used for knife
handles the shape of the handle brings
out the different wood layers which results in an attractive look. Our blocks are
made from coloured birch veneers which
1 ;7
No. 719563
2 Mahogany No. 719564
22 7.90
'_ 10.40
Micarta
3
@
are good reasons for this: Micarta is produced using a special high pressure procedure which combines absorbant material (cellulose material, linen etc.) with epoxy resin. The resulting material is an almost indestructible, resistant against oils and chemicals. Paper Micarta feels slip free and very comfortable in the hand, even
under wet or cold conditions. The material can be easily refined by applying scrimshaw, engraving and carving.
B
C ;3\`\=<`{;\
Very fine structure, made of numerous
layers of linen.
D CANVAS, BROWN
Made of numerous layers of canvas.
Dimensions
Dimensions
?^'?^
No. 831406
?^'?2
No. 831407
?^'?"
No. 831408
?^'?^
No. 831420
?^'?2
No. 831421
?^'?"
No. 831422
?^'?^
No. 800348
?^'?2
No. 800349
" 11.00
&2 18.40
& 12.50
' 23.90
Dimensions
'
6.90
&&2' 13.90
& 17.90
'" 33.90
E ;3\`\=<\
Very fine structure, made of numerous
layers of linen.
F CANVAS, BLACK
Made of numerous layers of canvas.
G \\Z=|`;;
Made of numerous layers of canvas.
Dimensions
Dimensions
Dimensions
?^'?^
No. 831417
?^'?2
No. 831418
?^'?"
No. 831419
?^'?^
No. 831409
?^'?2
No. 831410
?^'?"
No. 831411
_'
8.90
& 16.90
'
6.90
&&2' 13.90
& 17.90
?^'?^
No. 831423
?^'?2
No. 831424
?^'?"
No. 831425
'
6.90
E/F
&&2' 13.90
& 17.90
" 24.90
I
H
H ~\~;`Z;=\{;Z\;Z
Ideal for knife handles:
Paperstone is a new product made from
100% recycled paper which has been
saturated with natural resins. The paperresin mixture is than pressed together
under high pressure and heat. This
results in a material that is water- and
UV-resistant and heat resistant up to
&^?^2?2
No. 831244
&^?^2?&
No. 831245
I \;{]<;`
Vulcanized fibre is a composite material
made from paper. It is ideal as a layer
between tang and handle materials to
enhance appearance.
Dimensions ?&^?'
Colour
'" 10.10
3
&^ 12.30
Acrylic
Acrylic is an excellent material to work with, as well as being resistant
=
;#
and bases cannot damage it. An optimum finish is achieved by using a
polishing paste after wet sanding with Micro-Mesh.
1 black
No. 719577
2 white
No. 719578
3 rust red No. 719579
1
J \`~;<\Z
Ideal for writing utensils and minor
turning work.
Dimensions &??
K \`\{;Z\;Z=~\`
Dimensions &??"
230
Colour
Colour
1 red/yellow
No. 831456
2 ocean blue/yellow
No. 831457
chocolate
No. 831458
mother of pearl/black
No. 831459
5.40
5.40
5.40
5.40
red/yellow
No. 831460
2^
ocean blue/yellow
No. 831461
2^
1 chocolate
No. 831462
2^
2 mother of pearl/black
No. 831463
2^
7.50
7.50
7.50
7.50
2
&
&
&
4.90
4.90
4.90
Materials
E
A
A TAGUA NUTS, 1KG BAG
These amazing high-density nuts are
produced by the female species of the
;
marbled, creamy white flesh can easily
be carved, sanded, turned, scraped
(scrimshaw) and polished to make an
endless array of ornamental objects.
Tagua nuts are completely free of toxins
7
toys. The surface can be stained or
coloured using textile dyes.
[
?^#2
^@
No. 831042
'2 27.20
H
E |`\ZZ`;;`Z
Cylindrical root
of the grass tree
$
%
The wood is
easy to turn and
oxidizes to a redbrown colour once
exposed to air.
Length 150 - 500 mm.
Weight 1 - 10 kg.
Price per kg
No. 831102 &^& &&2 13.40
Root and grained wood may have irregularities, inner cracks and pockets.
Linen, Rattan
F
B BLACK WALNUTS
The fruits of the American black walnut tree
have very hard, wrinkled
inner shells with surprisingly intricate interiors.
When cut lengthwise or
crosswise (preferably
with a Japanese Dozuki
= _&''%=
the nuts reveal their
amorphous inner structure. These slices
can be used to make unique, eye-catching key pendants or jewellery.
@ ~
No. 831040
&" 1.30
1 Shaker Peg
Gesamtlnge '
Tenon diameter &^
Tenon length &2
No. 820090
2.90
2.50
C |{];{<`Z
Fine-grained,
impressively
coloured
Australian
burls. Their
natural round
shape and high
density makes them ideal for turning
unique bowls. Weight per
7
&#&
~
No. 831100 &"&& &2 19.10
D <\Z\;Z
The irregularly shaped cones
of the banksia grandis tree
can be easily turned to make
unique and bizarre vases,
jewellery and other small
objects.
Z&}#2
No. 831101
Z}2&#&
No. 831111
^_
5.20
2'"
8.20
K BAMBOO BACKINGS
Ideal for making bows.
Japanese backings in
absolute prime quality,
unblemished surface, long and regular
knot distances, precisely dressed and
trimmed for easy processing. Bundle with
7
Dimensions
40 mm No. 708900
45 mm No. 708901
2_& 79.90
'^" 99.90
L 3\|\[{];\{;Z
Kitchen knife handles made of Japanese
magnolia wood (Ho), lightweight, waterproof and warm to the touch. Tang hole
is pre-drilled.
1
L
F FABRIC BAND
For breathable seats:
Fabric band serves for spanning the seats
and back rests of chairs and benches
(e.g. shaker furniture).
&2
1.50
I ~;|Z\{;{<Z
Also serve as fine furniture knobs. They
are made of exquisite ebony, have rounded edges, slightly tapered shafts and
polished surfaces.
I
C
Not only is it extremely durable, compared to solid seat surfaces it is also extremely light and breathable. Fabric band is
extremely easy to process: It is fastened
to the chair frame with upholstery nails
;?
patterns can by achieved through the
combination of differently coloured
tapes.
Our tip: Also suitable for room partitions
and panels.
Length 100 m, Width
No. 830300
" 60.60
1 Violin Peg
Shaft diameter 9 mm
Head diameter
No. 820072
&^
2 End Buton
Shaft diameter 8 mm
Head diameter 14 mm
No. 820075
1.60
1
M
0.60
2
G
1
G RATTAN WRAPPING
From time immemorial, thin strips
pulled from rattan
cane have been
used to wrap all types of handles in
Asia. This natural material, which is very
comfortable to hold, lends elegance to
the handles of Japanese saws as well as
those of knives and other equipment.
Its curved profile produces a slightly
rounded surface structure that not only
looks attractive, it also serves to regulate
moisture, improve grip and prevent hand
fatigue. Smooth surface, flexible and
break-proof, can be affixed with wood
glue.
1 Material Fine
Length ^@=$&@
%
Width 4 mm
No. 708898
^
4.80
2 Material Extra-Fine
Length =Width
No. 708899
^^
4.20
&
19 mm
^
^'
No. 831001
No. 831002
No. 831003
No. 831004
No. 831005
"
^_'
_"
2^
_2
3.50
4.50
5.70
6.70
8.40
O
O ];\{;;`3[{
The magnolia wood handle has been
treated with a thermal* procedure and
is thus more resistant to absorbing water
and bacteria. With clamp made of laminated wood, the tang is already punched.
Dimensions &??&"
No. 719559
&' 21.90
231
Materials
B Z~\~;`Z|\3=
BAMBOO PRINT
Delicate, watermark-like design.
Dimensions "?_
No. 716107
&&' 14.50
A Z~\~;`Z|\3=~\
Dimensions '?&''
No. 716100
'^ 9.90
Dimensions "?_
No. 716103
&&2' 13.90
MAKING SHOJI
Masterpieces of Japanese Craft Culture.
In this book, Toshio
Odate explains how
to make a Japanese
sliding door, from layout to gluing on the
paper. Having been
trained himself as a
C Z~\~;`Z|\3=
]<`;~\;`
Fine, light fibre inclusions.
Dimensions "?_
No. 715997
&&2' 13.90
Leather
E
E Z\3;\;`=<\`#\;{
The (approx. 0.4 mm thin) but hardwearing salmon leather is soft to the touch
and easy to work with. Since the tanning
is a complex process, this type of leather
is rarely found in good quality. Our hides
1
D {\;`\;\;`=3;{3
GRINDING
Undulate rays feature a raised structure
in their middle section. When the skins
are dyed and lightly sanded, this emerges
in the natural white colour in the shape
of an eye or a cross. This striking effect
gives the piece a quite mythical radiance.
2
2
Dimensions ^?&^
Color
1 black
2 claret
3 dark brown
4 grey
5 beige
32.00
25.60
25.60
28.80
28.80
Dimensions 45 x 18 cm
black
No. 830861 ^' 54.00
F
4
F \]Z;\;`
The leather of the catfish, one of the few
fish without scales, is extremely tough,
durable and easily shaped. Due to its fine
pored structure, it is breathable and thus
perfect for handle wrappings.
Dimensions 50 x 11 cm
Colour
1 reed
2 grey
3 black
No. 831220
No. 831221
No. 831222
^^
^^
^^
3.60
3.60
3.60
G `<\`<#\;{Z;;~;\;`
This leather, garnered from the free-range
sheep of the Lneburger heath, is a real
rarity. By raising the sheep in a speciesappropriate manner and tanning the hide
with a rhubarb-based tincture, this leather is as smooth as silk and exceedingly
tear-resistant. The leathers beguiling
232
;\;`[;\|
Materials
A
1
G
G {;;`Z\;=]\
Very soft and flexible deer skin for making jewellery, braiding and for decorative
fringes on bags and clothing. Width 4 mm,
&=&
Colour
Swedish Cowhide
Vegetable tanned:
Strong, vegetable-tanned leather from
Swedish cowhides. Acid-free, soft (can
be hardened using soda), colorable.
Dimensions &@&>
Thickness
A
H
C `;{;;`;\;`=[;{;
Vegetable tanned:
Leather made from the hides of polar
reindeer is particularly soft, yet highly
durable and shapeable at the same time.
This makes it well suited for making
shoes, gloves, hats and other articles of
\]Z{;
Colour
1 naturalNo. 820128
2 brown No. 820129
&_& 17.50
&_" 17.60
3
B CUT
Dimensions &?
Thickness
H [;\;`\;=]\
Rectangular leather straps. For making
jewellery, braiding or decorating bags.
[^=2=
thickness 1.1 mm.
Colour
3 naturalNo. 709071
4 brown No. 709072
_'
'&
Colour
8.90
9.70
1
B <\`#\;{Z[;{Z;\;`=
]`3\|];Z;\Z
From the purveyor to the court:
Z
=
official supplier of the Swedish royal court, makes this
fine leather using a technique
that is many centuries old.
The time intensive process
involves tanning the leather
in bark extracts and then
air drying it. The so-called
rough edge leather has a
beautiful natural patina that
continues to improve with
age. It is easy to shape when wet, but is
very hard and wear resistant once dried.
In addition, it will not corrode steel and
is hypoallergenic and gentle on the skin.
A truly unique natural product.
Dimensions ?^
Thickness
No. 820121
_' 32.70
;{;`
History, techniques,
projects. This book
provides important
information on the
history of leather and
introduces types of
leather and proces>
projects, shoes, bags, cushions, jewellery
and many more items are described comprehensibly with the degree of difficulty
indicated.&_^~=
=
_
=2
?22In German.
No. 713826
^_" 39.90
D \|\`;\;`
Its use for making football shoes and
motorcycle clothing shows how very
strong and indestructible this leather is.
The skins of wild Australian kangaroos is
vegetable tanned, barrel-dyed, and then
milled mechanically. The processing with
vegetable tanning substances makes the
leather incredibly supple and smooth,
it is skin friendly and easily processed.
Wildware with typical natural properties.
Whole hides, ca. 0.5 m.
Dimensions
Thickness 2
~
E ;;\;`
Strong and supple:
The skin of the Scandinavian elk uniquely combines qualities like softness
and sturdiness. Its distinct texture
becomes even more beautiful by use.
The leather is equally suitable for
clothing, bags, belts or linings. Gained
as a by-product from hunting, the
hides show two or more bullet holes.
We supply whole or half hides.
Dimensions &&@>
Thickness
~
>
Colour
1 natural
2 med. brown
3 black
2.30
2.10
2.10
1 black
No. 708045 ^2'" 43.90
2 light br. No. 708047 ^2'" 43.90
3 natural No. 708046 ^2'" 43.90
I
Colour
$>
>
"^= #
ventional measuring unit for leather)
3
I [;\;`\;=`{
Hard-wearing round leather straps with
an even structure. For making jewellery
and leather wristbands.
The soft leather is easy to braid.
Thickness
Colour
Length
1 black
'
No. 708042
2 brown
'
No. 708043
3 natural
'
No. 708044
black
1.8 m
No. 708048
brown
1.8 m
No. 708049
natural
1.8 m
No. 708050
F
&'' 18.90
&'' 18.90
&'' 18.90
2.40
2.40
2.40
J `;{;;`;\;`Z`~
For belt loops and cords.
Dimensions &?^
No. 709070
&&
1.80
1
J
2
F `;{{;;`;\;`=[;{;
;
is soft, smooth and very tear-resistant.
Processing with natural plant tanning
substances makes it chrome-free and
therefore very kind to your skin. A valuable and durable material for clothing and
233
Materials
Horn
Horn can be worked relatively easily by sawing, sanding, turning
or carving, it polishes well and can be reshaped when it is heated.
Unlike plastic, horn is non-static, regulates moisture well and is
gentle on the skin.
A
H
1
A `;{[`
The vividly structured horn of the Indian
and African cow (Bos Indicus) is a fantastic natural material. It is easy to work
by turning, carving, sanding or steam
bending to make vessels, knife handles,
musical instruments, inlays or other
unique objects.
Outside
E
Inside
B [`~\;Z=]\=
`\Z~\`;
Their lively markings and translucency
make them ideal for inlay work and art
and craft objects. In restoration, they can
be used as a substitute for tortoiseshell.
Dimensions &2?2?
Price per pice
No. 831089
&^^ 15.50
C
1
E `Z`~Z]`<[3\;`Z
In archery language, horn is said to have
a memory, which means that after
strain the material springs back to its
original position. Therefore, this raw material is preferred in the making of bows
from laminates. The raw material and
the direction of the cut are essential for
its use in bows. These horn strips from
domesticated water buffalo (Bubalus
bubalis) are cut from the outer curve of
the horn and thus have the correct fibre
flow. In addition, our horn always has the
maximum length and no fibre twists.
No. 831290
2^" 31.40
I <]]\`~\;=<\=
~Z;{
The horn of the African water buffalo is
a fantastic natural material. It is easy
to work by turning, carving, sanding or
steam bending. When used as a knife
handle, it can be refined with white ornaments using the scrimshaw technique.
Sanded and polished.
Dimensions &??^@
No. 831224
^' 3.90
N
J
2
F
3
C [\ZZ`Z\`;Z
Horn squares made from African Watussi
cattle, ideal for small turnery, jewellery,
inlay etc.
Dimensions 75 x 15 x 15 mm
Colour
1 dark
No. 831035
2 medium No. 831036
3 light oak No. 831037
2
2
2
7.40
7.40
7.40
F <]]\`~\;Z=
;`\|
Plates made from the extra long, black
horns of the Indian water buffalo (bubalus bubalis), a domesticated and not
endangered species. The plates are wellsuited for making jewelry, inlay, mouth
[
?@2
Overall length @
Thickness
Price per pice
^@ No. 831031 &2 19.70
2@" No. 831032 _ 26.50
234
L
G <]]\`~\;Z=;#
`;{
These buffalo horn plates from Indian
water buffalo are decolourised and then
dyed on the surface to give them a
beautiful honey colour. They are ideal for
knife handle shells, ornaments or inlays.
Price per pair
No. 719576
' 9.80
N RAMS HORN,
~\;
Sought-after material for knife handle
scales: The horn of semi-wild pyrenean
sheep is beautifully structured and easy
to shape and finish. These characteristics
make it especially suited as a material
for making knife handle scales. Knifemakers who set a high value on great looks,
natural materials and handles which are
7
`
;
may be made out of these generously
`
Z[
^@
Overall length &@&
Thickness &@
Price per piece
No. 831185
"^^ 11.10
G
D [`~\;Z
Plates made from Norman cow horn with
steam heating and pressing. Due to their
lively yellow-brown pattern and transparency, they look just like (protected) tortoise shell. Suitable for intarsia, restoring
(in place of tortoise shell), jewellery and
lighting object.
Dimensions &@
Thickness @'
Weight &@
~
&
No. 831292 && " 5.10
L `;{;;``=;|Z
Pieces and slices of reindeer horn, ideal
for knife handle tips, handle scales and
connecting pieces.
Overall length &@^
@^
Weight _@
~
&
No. 709134 &
5.40
O
O STAG HORN CROWN
~;;Z
Stag horn crowns are rarities especially sought after
by scrimshaw artists. Their
high density make detailed
work possible, which is in
beautiful contrast to the pedicle shell.
Also suitable for inlays, small turnery
and ornamental items. Base sanded and
polished.
@2
~
No. 831060
" 6.30
Materials
55 x 18 x 5 mm
No. 831154
?&'?
No. 831155
"?^?2/
No. 831156
"?^?
No. 831157
^'_
4.60
^'_
4.60
_&
8.50
_&
8.50
E Z`Z;[Z=#~;;Z;
Ideal for laminated backings on wooden
or composite bows. The lamination
increases draw strength and prevents
breakage of the bow. Almost unlimited
durability when stored under dry conditions. These sinews are dried gently at
our company and so keep there elasticity
_@"
>
for one composite bow.
;
?&#^
Overall length ^
No. 831247
& 17.90
Mother-of-Pearl
The shimmering multi-layered deposits found on the inside surface of sea shells yield
one of the most fascinating natural materials known to humankind. Mother-of-pearls
magical glossiness and intriguing array of colors make it perfect for enhancing the
appearance of turnery, furniture, ornamental objects, toys and music instruments.
It is easy to work and polish and therefore
ideal for intarsia, marquetry and jewelry
applications. The white, pink, black and
gold mother-of-pearl is harvested from the saltwater pearl (pinctada maxima).
The paua mother-of-pearl is harvested from a mussle species (haliotis iris) from
the South Seas that has a highly figured and colorful grain (blue/turquoise/green).
?&^
J
I
1
I 3;`#]#~;\`=
``;|\`~\;Z
Random assortments of sizes. 50 grams
$#&%]
?^
?2
1
2
J 3;`#]#~;\`=Z\`;Z
5-piece sets.
Dimensions ?
Colour
2
B \3;<;=\{;Z\;Z=
PAIR
Smooth white camel-bone panels for
use as knife handle shells, ornaments
or inlays.
Dimensions
1 &^??2$%
No. 719585
'^ 9.90
&&?^^?2$
#
%
No. 719575
'^ 9.90
2 &^??2$
#
%
No. 719574
& 11.90
C
C 3\33=\{;Z\;Z~\`=
BROWN
The fascinating, 10,000 year old relics
are the fossilized tusks of the Siberian
woolly mammoths (Mammuthus primigenius). The pieces offered here have a
lively surface pattern, polished, with a
flat ground back. Can be used as handle
scales, for turning an ordinary knife into
a unique rarity.
Dimensions 55 x 18 x 5 mm
Colour brown
No. 831090
^" 36.40
F `;{{;;`<\Z;[
Because of their length and high quality,
back sinews of red
deer are perfect
for laminated backings on wooden
or composite bows.
The lamination
(backing) with
shredded sinew prevents breakage and
reinforces the bow. The sinew fibres
can also be used for the traditional bow
string splices. The dried sinew strands
$
?&#^%
tions and will last almost indefinitely.
Overall length 450 mm
No. 831228
&2& 15.00
Horse Hair
Horse hair has
long been used
for manufacturing brushes,
woven fabrics
and upholstery. However, its toughness, elasticity
and pleasantness to the touch make it
ideal for making hand-crafted objects as
well. It can be woven into fabrics, string
or ropes and lends jewelry and artistic
objects its wonderful silky gloss and
attractive, natural appearance. The hair
we offer is dressed sorted by length and
color, chemically washed and disinfected
multiple times and the defective hair has
been removed. Bundle of 500 g.
1 white
2 black
3 gold
D `\;`\;=<
Ideal for buttons, jewellery, knife handles
with a hidden tang or flat tang and for
making musical instruments.
Dimensions
&^?^?
No. 831172
&^^2 15.90
K 3;`]~;\`;;Z, 5 MM
=
Colour
white
pink
gold
paua
1
2
3
4
No. 830816
No. 830822
No. 830834
No. 830840
__
^^
^^
^^
3.30
3.60
3.60
3.60
L 3;`]~;\`;;Z= 10 MM
=
1
2
3
4
Colour
white
pink
gold
paua
No. 830818
No. 830824
No. 830836
No. 830842
&^
2^
2^
2^
6.10
6.70
6.70
6.70
1
M 3\`Z;Z;Z;;Z
Ideal for intarsia and restoration work.
Dimensions
Colour
180 x 150 x 4 mm
180 x 150 x 4 mm
&'?&?2
&'?&?2
yellow/brown
reddish brown/black
yellow/brown
reddish brown/black
No. 831450
No. 831451
No. 831452
No. 831453
&'
&'
_^"
_^"
21.90
21.90
32.60
32.60
H `Z;\`=[;=<{;
Natural color (unbleached), thin and
flexible, colorable, silky gloss.
Overall length 2
No. 820084 2"& '"" 34.50
1 white
2 black
3 paua
1
2
G `Z;\`=<\=<{;
Natural colour, very strong, silky gloss.
Overall length 700 mm
No. 820085 2& _^& 32.50
Colour
Ivory Alternative
Ideal for knife handles:
The high-grade ivory alternative made
of polyester comes astoundingly close
to real ivory, which is species protected. The colour and fine grain give the
material a natural appearance. The ivory
alternative is good to work with and can
be polished to a high gloss finish.
N 3\`Z;Z;
\{;Z;~\`
Dimensions &??'
Colour
yellow/brown
No. 831454
& 17.90
reddish brown/black
No. 831455
& 17.90
235
Materials
Steel
Triple-Layer Steels
Multi-Layer Steel
Mono Steel
1
I
2
A ~3Z3\|\Z]\Z;;
For the ultimate requirements:
This novel Japanese blade steel leaves
nothing to be desired: A core of the
hardest powder metallurgical steel SG/7
#
tough, the double-sided suminagashi
plating, made of nickel and rustproof
stainless steel, gives it a spectacular
appearance. Whether used
as a kitchen knife or for
outdoor use, this steel
impresses with its outstanding durability, sharpness
retention and resistance to corrosion. Flat
stock, untempered, further processing
by forging, heat treatment instructions
included.
* (C 1.3%, Cr 15%, Mo 3%, V 2%)
D \~\;Z;3#\;`Z;;
SUMINAGASHI
The finest
#
Zgashi steel with
a medial layer
of White Paper
Steel. The multilayer steel can
be ground or
forged and then
hardened to produce blades of
both incredible sharpness and resilience.
Flat steel, not stainless. Supplied unhardened with heat treatment instructions.
Dimensions ?^^?&
No. 719610
^ 64.30
Dimensions
"?^?_
No. 719613
??^
No. 719627
&_2^ 209.00
2&^ 66.80
B Z3\|\Z]\Z;;=
;`\
Stainless, for cooking and folding knives:
^^#
7
vealed in this Suminagashi steel through
a flat bevel and appropriate etching.
;?
#
from VG10 steel*. The outer layers of
stainless steel give the blade the typical
Suminagashi grain. The forging surface is
not ground-finished, tempering instructions included.
*(1% C, 15% Cr, 1% Mo, 0.2% V, 1.5% Co)
Dimensions @??
No. 719614
^2'" 43.90
C \~\;Z;3#\;`Z;;=
`;[;~\~;`Z;;
Close to the
sword:
Steel with this
composition was
frequently used
in Japanese
swords (Katana).
The high carbon
core layer does
only extend to
the middle of the blades profile. Multiple layers of softer steel folded on either
side make this metal virtually unbreakable with excellent cutting properties.
This type of construction also minimizes
the risk of cracking during hardening.
Usually the steel is forged further, but a
blade can also be ground from the steel
directly. The material is supplied unhardened; instructions for heat treatment
$
2` %
Not rust-proof.
C
236
F \~\;Z;`~;#\;`Z;;
Japanese triplelayer steel is
renowned for
its extraordinary sharpness,
long edge life
and excellent
sharpenability
(minimal burr).
They can either
be ground (using
wet grinders) or forged into the desired
form. Also suitable for making Damascus
steel (folding techniques). Semifinished
product, not stainless. Supplied unhardened with instructions for hardening and
tempering.
I <;~\~;`Z;;
Tough and edge retaining:
Alloyed Japanese carbon-steel, martensitic, due to carbide formation somewhat
tougher and more wear-resistant than
White Paper Steel, coarser grain. With
heat treatment instructions.
$&&#&=Z&#=3
#^=
#=[&#
&=~=Z%
Dimensions ?^?
No. 719621
^^ 38.50
J [;~\~;`Z;;
The finest grain:
Non-alloy Japanese carbon-steel, finest
;?
=
close to sword steel. With heat treatment
$&=&#&==
Z=&#==~==Z=%
Dimensions ?^?
No. 719620
2^ 30.50
Z3\|\ZZ;;
[`;\;`
2 Medial layer Blue Paper Steel
This 8-layer Suminagashi steel is usually Dimensions ^?^^?^
forged onto both sides of a hard core
No. 719616
&' 18.80
$<
[~
%;
these 8 layers of steel consists in turn of
a Gokunan-Koh layer (traditional soft
steel) that is welded to a thin, alloyed
carbon steel layer, which prevents the
steel from decarbonising too quickly.
Dimensions
150 x 15 x 5 mm
No. 719630
?^?
No. 719631
"2
5.90
&&"^ 14.20
1
2
3
E {\3\ZZ]\Z;;
High-performance Damascus:
This beautifully structured Damascus
]Z&"
Indus Valley. It is forged from low alloy
&"
7 #$&_%
&=
band saws. A powerful combination! The
silvery Nickel steel contrasts strongly
with the darker 1095 carbon steel, which
produces this nice pattern. Comes
with heat treating instructions.
Dimensions ^?^'?
Texture
1 Random Damascus
No. 719402
"'^ 59.30
2 Rose Damascus
No. 719404
2_& 79.90
3 Firestorm Damascus
No. 719406
2_& 79.90
3;ZZ;`Z3;{;]`\]|;`
This practical manual
gives a straight forward and good value
introduction to the
fascinating hobby of
bladesmithing. With
countless step-by-step
photos, it shows you
how to construct a simple smiths hearth, how
to make the necessary tools yourself, how
to forge a stick tang blade out of spring
&'~=~
7=
=&_?^In German.
No. 713796
_' 29.80
K Z[;{ZZ;;
Sheets made of cold-rolled Uddeholm
carbon-steel for forging tool and knife
blades. Also suitable for forge welding.
Comes with heat treatment instructions.
Steel No. 1770 (C 0.7%, Si 0.4%, Mn
_=~^=Z%aled, oil hardened, final hardness approx.
2#"`
Dimensions
?&?
No. 709099
&__^ 21.10
&?&?
No. 709098
"^^ 34.90
G MOSAIC PIN
Decorations instead of rivets:
Give your knife handle scales a touch
of class with these fetching mosaic pins
made in Japan. The rosette-shaped
pattern is composed of fine brass and
copper wires cased in a high-strength
stainless steel tube. Also suitable for embedding in jewellery and decorative art.
&
1
2
3
4
5 mm
2
7 mm
8 mm
No. 708390
No. 708391
No. 708392
No. 708393
&_2
&_2
&_2
&_2
25.90
25.90
25.90
25.90
H \{;
H
;\{~\;Z
Brass.
Dimensions ?^?^
For blade thickness
&"^
&"^
2.30
2.30
L \~\;Z;Z[`{Z;;
\3\\|\;
The dream of every sword smith:
Japanese masters made the queen of
blades from amorphous material. Original
Tamahagane is made in the days-long
Tatara process using the purest ore sand
(masa) and pine charcoal. We have a
small quota of this precious material,
which formed the basis of over 1000
years of high culture of forging swords.
The material can be made into blades
by experienced blacksmiths, and is also
an asset to every collection as an object,
due to its mystically shimmering fragments, which are streaked by coloured
metal oxides.
Weight _@&
~
No. 719608 ^& 0.30
Obsidian | 282
237
Knives
;\Z\`Z[|
nature provides.
7
wooden handles, the well-balanced design
Iron (soft, resilient)
Japanese knives
@
[ +\
Knives types
Santoku
Sashimi
\#
=7
Gyuto
Versatile cooking knife for cutting up,
Deba
Usuba
*
*
Petty
Our suggestion:
Ajikiri
]
7
238
Knives
Steel qualities
Beware of fakes
www.more-than-tools.de
$7=== and are of the best quality.
all-purpose, etc.), but you should also
to spend on looking after it. How easy-care
martensitic structure. This means you can grind a knife is depends mainly on the blade steel
it to exceptional sharpness, which it retains for
a long time. These blades are particularly suitable for the gentle preparation of foods - but
Blade steel
sharpen.
PM steels
content, it is not as easy to sharpen (chromium affects the sharpening stone and
Forged or stamped?
=
not a Chinese one, which is usually engraved in the metal individually by the
smith.
\7
at least two and usually even three layers
of metal, a wavy border line must be visible at the cutting edge.
Handle construction:
7
239
Knives
Handling
Correct care
Cutting pad
7
Sharpening pass
hand.
postage.
Sharpening
to the tip.
Storage
Sharpening courses
The perfect introduction to the art of
$%
rust eraser.
downwards.
Sharpening primer
Our sharpening primer can be downloaded
free of charge at our webshop.
240
Cleaning
Japanese Knives
Japanese Knives
From Masters Hand
The master blacksmith performs all the important work only for very
special works of art. This makes every piece unique, special and
valuable. The blacksmith guarantees this with his name.
Shigeki Hocho
;
>}
Master Shigeki practices steel
folding and forge welding with great
virtuosity to create blades with an enchanting aesthetic - each one unique in
its structure.
A Z|;\ZZ
Hard Blue Paper Steel is used for the
core cutting layer and low alloyed steels
Outstanding knives with traditional blade shapes have been made in the traditional manner in small Japanese foundries for centuries. Often with a high level
of manual work or even completely handmade. Knives of this classical form are
known as Wabocho in Japan. They are valued by experts because of the best
steels, carefully selected materials for the handles and ferrules, a high level of
workmanship, original design - and last but not least, extreme sharpness and
sharpness retention.
The blades usually have a hard carbon steel core forge welded to one or more
outer layers of iron - similar to multi-layer Samurai swords. Traditional materials
and forms are also used for the handles. In a demanding acceptance process,
DICTUM selects the best manufacturers on site and carefully checks the quality
of all products.
B Z|;`Z#\{;
Combining an ancient tradition of Japanese lacquerware with a fine blade to
create a unique masterpiece. In Japan,
the art of lacquerware has been developed to ultimate perfection. Japanese
artisans have redesigned the magnolia
wood handles of our urushi* series
following this technique. They are coated
with deep red urushi varnish and show
highly attractive fine gold decorations on
;
is hand signed and packed in a beautiful
case made of kiriwood. Polished buffalo
horn ferrule. Cutting edge of Blue Paper
Z
?2`=
rustproof.
241
Japanese Knives
A
A Z|;]Z\
Original and pure:
Master Shigefusa uses original
materials to create knives in
classical shapes following the strict code
of traditional Japanese aesthetics. With
meditative devotion, he creates the finest
blades in his workshop using traditional
swordsmithing methods. This includes
forge welding of the individual layers in
a charcoal furnace, forming of the blades
with a scraper blade and then grinding
and polishing by hand on a veritable
arsenal of water stones. Magnolia wood
handles with buffalo horn ferrules. Cutting edge of high-carbon steel, hardness
?2`=
242
5 Deba
Blade length 180 mm
Blade thickness 8 mm
Overall length ^^
Weight ^_
No. 719475
& 124.00
Japanese Knives
Hayashi Hocho
Light and elegant:
Aesthetically pleasing knife with a twelve-layer blade from Suminagashi steel. The
blade is grounded very thin and allows you to cut very fine. The handles are made of
water-resistant magnolia wood with ferrules of glue-laminated exotic wood. Cutting
[~
Z
?2`
=7velled on both sides.
A HAYASHI HOCHO,
[Z;\
\\Z=[Z;\
C TADAFUSA HOCHO
Hammer marks on the forged skin
- Art and handcraft of high utility:
The individual traces of the blacksmiths
hammer from this traditional workshop
can be seen in the so-called forged
^#
7
This not only gives the blade a raw, original appearance but also makes it easier
to care for, making this double-bevelled
knife robust and suitable for daily use.
The cutting edge of non-rustproof Blue
Paper Steel is perfectly polished and
sharpened, the outer layers are of rustproof steel. The glue-laminated, exotic
wood ferrule provides an attractive visual
contrast to the blades.
?2^`
243
Japanese Knives
7
$2&`%
7
tough steel. The black-burned surface
forms an effective contrast to the ferrule
of extremely rare, grained buffalo horn
and the handle of natural magnolia wood.
Not rustproof.
5 2-Piece Set
_&"&Z $#
%
_&"7$7
%
No. 719339
"22 115.00
4 Herbs Knife
Blade length 90 mm
Blade thickness _
Overall length
Weight 70 g
No. 719249
'_ 53.40
Price advantage!
B SUIMON HOCHO
SANDALWOOD
The high-contrast blade of
Japanese Damascus steel con
_^
7
highly polished with great care. The cutting edge layer is made from a high-alloy
SKD11 steel* with a high carbon content
for extraordinary sharpness and excellent
edge life. The core layer is sandwiched
7^2
stainless steel (SUS 410) on both sides,
Lifetime sharpening.
Two free sharpenings.
244
Japanese Knives
A TANGANRYU HOCHO
A perfect combination of modern design and traditional blade form. The damask structure
of the lower part of the blade contrasts
beautifully with the hammered surface
structure of the upper part, which also
prevents the cut material from sticking
to the blade so easily. The non-riveted
round handle of water-resistant linen
micarta has an attractive black/grey grain
and is set in a polished stainless steel
ferrule and hoop. The blade comprises
2^
=
cutting edge layer made of VG-10 steel.
?2`Z
2 2-Piece Set
_&""Z $#
%
_&""&| $
%
No. 719495
&_2 259.00
Price advantage!
245
Japanese Knives
B \#~`~Z;];[
Z\`~;|Z;\{{{
Sharp as a razor and almost
without resistance, the blade of the Santoku with double bevel cuts fish, meat
and vegetables equally. The beautifully
shaped handle made of Magnolia wood
and genuine buffalo horn ferrule is very
comfortable to hold. A wooden sheath
protects the blade. In order to keep the
valuable knife sharp use the combination sharpening stone together with
A \~\;Z;3|];
Allows the aroma of herbs to
develop:
This knife is forged exclusively for our
customers by our Japanese master. Fitted
with a heavy, arched blade it chops all
types of herbs with a rocking cut. Tender
stems and leaves are not squashed but
cut to enhance the flavour.
Three-layer steel blade*, ground razorsharp, surface left in forged condition
7
# $
%;ry knife is signed by the master. Magnolia
wood handle with a buffalo horn ferrule,
bevelled on both sides.
* Middle layer of blue paper steel, 61
HRC, iron outer layers (not rustproof).
Blade length &^
Blade thickness 2
Overall length _
Weight '
No. 719253
22^" 79.00
1 All-Purpose Knife
Blade length 105 mm
Klingenstrke &=
Gesamtlnge
Gewicht 40 g
No. 719217
&^'_ 16.50
2
4
2 Fruit Knife
Blade length 100 mm
Blade thickness &
Overall length
Weight ^
No. 719020
&&' 14.50
3 Vegetable Knife
Blade length 105 mm
Blade thickness &
Overall length
Weight 40 g
No. 719229
&^'_ 16.50
246
4 3-Piece Set
With this starter kit you are well prepared
for any cutting work. Three compact
knives in an attractive red leather roll-up
case:
_&"&_\#~
_&""7
_&"]
No. 719195
^"" 47.50
Japanese Knives
Saku Hocho
These all-purpose blades are exactly right for becoming acquainted with traditional
Japanese knives: The rust-resistant, sharp cutting edge is flanked by two layers of
rustproof stainless steel, which makes it easier to care for. The handle is of hard,
fine quality rosewood. These knives are available with or without wooden sheath.
?2`
A
Z\[Z;\
Z\[Z;\
4
3
B Z\\#~`~Z;];
WITH TOKICO];Z\`~;;` Price advantage
An uncomplicated knife
sharpener that is suitable
for both Japanese and
European knives:
C \~\;Z;];Z;[
3<\Z\`~;|
Z;\{Z\`~;|{{
Price advantage
D |];Z\`;`
Z;=];=3<\
Z;=Z\`~;|~`3;`
$|;`3\% Price advantage
Cooking Knife Starter Set:
Razor-sharp cuts forever are almost guaranteed with this starter set! If necessary,
the handy Santoku knife can easily be
sharpened on the included water stone.
The also included Sharpening Primer
gives instructions on how to proceed.
Set includes:
Z =#
$
_&"_"%=^#
7
carbon steel core (not stainless),
flanked on both sides with stainless
steel, handle and sheath are made from
bubinga wood.
7 $ _&&2&%=
&^
=&_??
Z
~
247
Japanese Knives
Blades from Masters Hand
Katsuhiro Hocho
For the highest standards of
use and aesthetics:
These unique kitchen knives are
forged from one of the hardest
blade steels. They are characterised not only by their phenomenal
sharpness and durability, but also
by the fascinating pattern of the
2#
7$
Z|#%
are perfected by handles of either
water-resistant desert ironwood, the
densest wood in the world, or of
water-resistant black linen Micarta.
The polished nickel-silver bolsters
harmonise superbly with the ergonomic handle. The pinning of the
handle scales with rosette-shaped
248
A KATSUHIRO HOCHO,
;3\`\\{;
Japanese Knives
B KATSUHIRO HOCHO,
{;Z;``[{\{;
249
Japanese Knives
A KURUMI HOCHO
;?>
everyday use:
This exclusive knife series
;
Consortium, an association of knife forges with decades of tradition. Under the
lead of renowned designer Chiaki Murata,
traditional forging techniques and premiA
250
Japanese Knives
Sharp, for all Intents and Purposes
A
Z;`;ZKLASSIK
Classical aesthetics, traditional
technology:
Perfect, traditional Damascus blades
and optimally balanced handles of
brown laminated exotic wood. Traditional
methods result in classical aesthetics for
^
Z
blade with a cutting edge of VG-10 steel.
`
?2`
10
9 2-Piece Set
_&""2Z $#
%
_&"^'~$#
%
No. 719397
&2^ 186.00
Price advantage!
10 5-Piece Set
Set includes:
_&""2Z $#
%
_&""_7$7
%
_&""| $
%
_&""| $
%
_&""| $
%
_''~
laminated birch wood
No. 705883
2 719.00
Price advantage!
251
Japanese Knives
A 3\Z;
These all-purpose knives for
^
rustproof stainless steel and
a cutting edge of VG-10 steel. Mirror
polished blades and handles of ebonycoloured, glue-laminated exotic wood.
?2&`
10
Price advantage!
Lifetime sharpening.
Two free sharpenings.
252
10 2-Piece Set
_&"_Z $#
%
_&"&| $
%
No. 719459
&2' 240.00
Japanese Knives
A KUSAKICHI HOCHO
Traditional technique,
easy to use:
These knives can be cared for in
the same manner as Western knives. The
cutting edge of rustproof VG-10 steel is
7&2
hammered surface. Handles of laminated
?2&`
2-Piece Set
Price advantage
_&"| $
%
_&"2Z $#
%
No. 719255
&&" 179.80
3-Piece Set
Price advantage
_&"| $
%
_&"2Z $#
%
_&"_7$7
%
No. 719254
"& 273.00
B TAIA HOCHO
;#
Western design which, thanks
to their light weight, are very
comfortable to use. The cutting core
of VG-5 steel* is sandwiched between
two tougher layers of stainless steel
with a hammered surface structure. The
handle shells of black laminated wood
are attached to the tang with two rivets.
?2`=
#
B
253
Japanese Knives
Puristical Classics
Kitchen knives with purist, simple wooden handles are valued for their clear form and light weight. Sometimes
reserved, sometimes playful and dramatic but always committed to the traditions of handcraft.
4
A
Price advantage!
4 3-Piece Set
_&"&'Z $#
%
_&""| $
%
_&"&"7$7
%
_''
No. 719233
" 249.00
A Z|;
High contrast and sharp:
Due to the contrast between
the Damascus blades and the red sandal
wood laminated handels these knives
^
Japanese Damascus steel and the cutting
edge of VG-10 steel are rustproof. Attractive price/performance ratio.
?2&`
B ^{#;Z
A new dimension of knife handles:
These elegant japanese knives
impresses by their modern design. The
handle is made from beautifully grained,
laminated, exotic wood, its sharp
design investing the knife with a very
ergonomic grip. With its beveled end
the handle perfectly fits the heel of the
hand, almost like a palm stone. Dark and
elegant, the handle encompasses a hand
=^#
7
Z
steel. The cutting edge is forged from
VG-10 steel (stainless). These knives are
distinguished by their remarkably light
weight. Professional chefs agree that the
knives lie comfortably in the hand and
that it is good and easy to work with.
?2&`
254
Price advantage!
5
5 2-Piece Set
_&"^2Z $#
%
_&"^_| $
%
No. 719441
&'_^" 223.00
Japanese Knives
A ARATA HOCHO
Archaic design at a
beginners price:
Lovely shaped knives with hand-forged
blades of archaic appearance. The
cutting edge is of Blue Paper Steel
flanked by two layers of rustproof steel.
Hammered surface, handles of thermally
treated bubinga wood. Hardness approx.
2^`
8 3-Piece Set
Set includes:
_&"&'Z $#
%
_&"^_&| $
%
_&"&_7$7
%
No. 719375
' 248.00
Price advantage!
B Z\`~;|\~\;Z;;Z
A Japanese master blacksmith with a
legendary reputation in Japan shows you
how to professionally sharpen kitchen
knives on water stones. He introduces
different types of whetstone, shows the
correct sharpening motions for sharpening single and double-bevelled knives
and provides information on caring for
knives. Knives sharpened in this way not
only make your work easier but are also
a pleasure to use and allow you to treat
your food with respect.
DVD 15 minutes, in German.
No. 713806
"2 5.90
255
A <`;\{];
Long tried and tested, super-sharp Japanese serrated knife. It has a long, flexible
blade of solid stainless steel, polished
to a fine mirror finish, laminated exotic
wood handle. Stainless.
B <`;Z\\3\{<\|;;
];
]?77
23$
approx. 58 HRC) with serrated edge.
Handle of hammered, satin-brushed
stainless steel.
C {;;;\;`
From traditional Chinese cuisine:
This cleaver from a traditional Shanghai
manufacturer features a high-quality,
triple-layered steel blade with an extra
hard steel core offering unsurpassed
sharpness and edge life. The blade,
ferrule and tang are forged from a single
piece of steel to which the colourfully accented pakka wood handle is seamlessly
attached. Rustproof.
Blade length 185 mm
Blade thickness ^
Overall length ^&
Weight ^
No. 708082
^ 59.90
G 1
D ;\;`
This cleaver is ideal for chopping meat,
fish, vegetables and fine herbs. The ergonomically shaped handle is comfortable
and safe to hold. The continuous tang is
triple riveted together with handle scales
made from laminated wood. Rustproof.
Blade length 170 mm
Blade thickness =
Overall length "
Weight ^"
No. 708084
&^ 29.90
E Z3\\~\;Z;
\~`~Z;];3
Ideally for peeling and cleaning fruit and
vegetables and all types of small cutting
tasks in the kitchen. It consists of a VG10 steel cutting edge and stainless steel
outer edges. Rustproof.
Blade length 80 mm
Blade thickness 1.5 mm
Overall length 190 mm
Weight 2
No. 719304
^^^ 39.90
F Z;;\~`~Z;
];
Simply constructed all-purpose
knife with olive wood handle.
Ideal for all smaller tasks in the kitchen
or also suitable to be used as a steak
knife. The blade is made of rustproof
&&&2
2#_`
Blade length 80 mm
Blade thickness &^
Overall length 190 mm
Weight ^
No. 709325
&'' 18.90
256
G \~\;Z;;
]{|;Z
These practical knives are useful
whenever cooking underway.
Whether sailing or camping, the folding
knives can be stored in a minimum
of space and are well protected when
;
eye catcher: The blade is fully rustproof,
^
{
surround the cutting edge of VG-10 steel.
The blade latch safely in position via a
Back Lock mechanism. Handle scales
of laminated exotic wood, sturdy nylon
sheath with a belt loop.
1 Santoku
Blade length 100 mm
Blade thickness ^
Overall length
Weight
No. 719286
& 179.00
F
2 Usuba
Blade length 100 mm
Blade thickness ^
Overall length
Weight
No. 719287
& 179.00
A ;;`Z\<;;Z=
2#~;;Z;
These beautifully shaped table
knives have an elegant look and
catch the eye on any laid-out table. Their
slightly curved handles and low weight
provide a comfortable grip. The handle
shells are made of dark ebony and fastened to the tang with three rivets. The
blade of rustproof Z40 steel is mirror-polished and has a hardness of approx. 55
HRC. The set comes in a beautiful and
robust casket for storing the knives.
Blade length 110 mm
Blade thickness 1.5 mm
Overall length
Weight 55 g
No. 709258
&^^2& 159.00
B \#~`~Z;;Z=
#~;;Z;
Four simple but elegant constructed all-purpose knives with
olive wood handles. They are ideal for all
small jobs in the kitchen but also make
good steak knives. Blades of stainless
&&&2
2#_` mes in a stylish wood casket and makes
an excellent gift.
Blade length 80 mm
Blade thickness &^
Overall length 190 mm
Weight ^
No. 709326
22^" 79.00
C ;;`ZZ;\;Z=
2#~;;Z;
With their special teeth, these knives
will take all the effort out of cutting your
steak or grilled food. The mirror finish
on the blade, handle tang and handle
end give the steak knives an elegant and
timeless look. Made from a single piece
of steel, they have no joints and thus
257
Kitchen Utensils
Kitchen Utensils
Knife Blocks
A ];<Z
Fine knives should not be stored in a
cutlery box or on a magnetic holder because the resulting magnetisation makes
sharpening more difficult. Instead, we
recommend these knife blocks specially
designed for Japanese Hochos, made in
Germany according to our stringent quality criteria. They accommodate 7 knives
7 _ "
mm wide, as well as a pair of scissors.
The solid weight provides stability and
the pitched arrangement allows fast access. The surface is sanded and treated
with vegetable oil. They are also suitable
1 Thermo Beech
Knife block of thermo beech* with maple
inserts.
No. 718992
2"_ 83.00
2 Natural Beech
7
;
7
thermo beech inserts.
No. 718990
"' 59.00
B ];`;ZZ
A great way to always have your kitchen
knives ready to hand: Whether on the
working surface or in the drawer. The
blades are safely separated from each
other thus staying sharper for longer.
Available in thermo beech* and natural
7=
^
7
up to 180 mm.
B
2 Natural Beech
Dimensions _?'?^
No. 718994
^" 28.50
Cutting Boards
Teak Cutting Boards
Teak is an extremely dense hardwood which is ideal for use in the kitchen in the form of cutting and chopping boards or for serving food. Its
naturally high oil and caoutchouc content gives it an antibacterial effect
and makes it extremely hard-wearing and resistant. The radial cut (across
C ;\~~|\{|
<\`{[;|`;
This solid board has a groove that is
designed to let any juice run into an
integrated porcelain bowl.
Dimensions ?^?2
Weight 7 kg
No. 706410
&&2'& 139.00
258
the grain) brings out the vibrant wood grain, giving it an ornate look. The
solid boards also sit firmly during chopping. The wood is from controlled
sustainable FSC-certified plantations. To make sure the board retains its
strong colour, rub it with a little oil from time to time.
D ;\~~|\{|
BOARD
A handy square board that is ideal for all
everyday chopping and cutting tasks in
the kitchen.
Dimensions ^?^?
Weight ^&
No. 706411
"' 59.00
Kitchen Utensils
A ;\|\{Z;`|
<\`{=`;\|\`
This board is also great for serving food
such as cheese. It has two concave
recessed grips for easy transport.
With wooden feet.
Dimensions 2?&_?
Weight _
No. 706412
"' 59.00
A
B ;\|\{Z;`|
BOARD, ROUND
Handy round cutting or serving board.
With wooden feet.
Dimensions ^?^?
Weight
No. 706413
2&' 74.00
E ;Z|<\`{
Sweet chestnut wood* is tough and
highly water resistant. The heavy board
remains stable when chopping and mincing. With juice groove.
* Antibacterial and antifungal; the
chestnut shingle roof of the Mont SaintMichel monastery is over 180 years old.
Dimensions ?^?^
Weight
No. 706034
^^^ 39.90
F |\{Z;`|<\`{Z
3\{;]<\3<
;7
Serving Board made of bamboo. The dark
color of the cutting surface comes from
a special heat treatment process which
hardens the wood and makes it wear
resistant.
1 Small
Dimensions ^??
Weight 1.1 kg
No. 706054
& 14.90
2 Medium
Dimensions 2?^?
Weight
No. 706038
&^ 29.90
259
Kitchen Utensils
A 3Z;`
For ginger, small cucumbers and truffles.
Dimensions 145 x 90 mm
No. 719164
& 12.50
B ~;;;`
For carrots, radishes and asparagus.
Dimensions &^?_
No. 719162
& 11.90
E ;;Z=#~;;Z;
Practical 4-piece set of kitchen
knives with olive-wood handles.
Ideal for all small jobs in the kitchen
or for picnics. The blades are made
of stainless steel.
C ;`\3~;;;`
This innovative feather-light ceramic
peeler peels asparagus, vegetables and
fruit effortlessly and without clogging to
release the pure flavour of the food. This
is due to the blades of zircon ceramic, a
material that is not only sharper, but also
retains its cutting edge 10 times longer
than hardened steel. Dishwasher safe.
Blade length 40 mm
Weight ^
No. 719185
&2_ 19.60
Set contains:
\#
]
{ 7#7
Z
7
No. 719376
" 24.90
D ;;Z;;`=#~;;Z;
The cheese knife is best suited for soft
and semi-firm cheese, with fork end for
picking up cut pieces of cheese. The
cheese slicer is suitable for almost all types of hard cheese. Draw over the cheese
with slight, even pressure; you can vary
the thickness of the slices by varying the
pressure.
No. 720025
&2_ 19.90
Front side
Back side
F ~`;33;Z;`|`\;`
3`~\;
This stainless steel grater is ideal for
grating citrus fruits, garlic, ginger and
;
G 3`~\;#Z{;{<|`\;`
4 in one:
This 4-sided Box Crater of Microplane
copes with all tasks due to the cutting
technology and the ergonomic design:
Blades made of best stainless steel.
}]=3;?#
tra Coarse graters and one slicer. he fine
H ~`];ZZ\3`~\;
;`\Z~Z
The dozens of razor-sharp mini plane
blades on this rasp will revolutionize the
};
parmesan, ginger, garlic, nuts and chocolate. The professional stainless steel
utensil can be cleaned in the dishwasher.
260
No. 705153
medium No. 705154
coarse No. 705132
^^ 28.95
^^ 28.95
^^ 28.95
I Z{;`\\3;]`~`];Z#
SIONAL 3`~\;;`\Z~
This grater attachement allows you to
grate even small pieces safely. It protects
your fingers from injuries by the sharp
blade. Fits all professional series rasps.
Dimensions 2?_^?2
No. 705172
&2 4.95
Kitchen Utensils
A ]`;Z33;;`];
;\\|;
The worlds best sommeliers swear by
the Chteau Laguiole sommelier knives,
made in the famous SCIP workshop
in Thiers, France. The corkscrew with
soul (internal space between the spirals) evenly distributes the pulling force
and prevents the cork from breaking, the
leverage is optimally balanced and makes
pulling easier. Horn handle, engraved
springs. Supplied in an exclusive leather
case.
Blade length ^
Blade thickness
Overall length 195 mm
Weight 90 g
No. 709049
&&^^2 134.90
B
B ]Z<;[;;;`Z
These tweezers, made out of brushed
rust-free steel is a must when enjoying
fish meals. The jaws, which are partially
ground on the inner surface, enable
a precise grab. The simple and thus
modern design is suitable for every
household while the surface is very easy
to clean.
Weight 55 g
Overall length 145 mm
No. 720017
&^' 18.30
C ~`Z;\`Z=Z\;ZZ
For easy cutting:
With these robust forged shears, you can
easily cut up any kind of poultry with very
little effort. For thorough and hygienic
cleaning and resharpening, the shears
can be dismantled into two parts quickly
and easily. Both shears and spring are
made of stainless steel.
Blade length 100 mm
Weight ^^
Overall length
No. 718265
'' 70.00
D {;Z|;`;
Z;\`Z
;?
kitchen shears with a light
action. For cutting poultry, fish, herbs
and vegetables. Adjustable path, blades
of rustproof hardened stainless steel. Can
be dismantled very quickly for washing.
Blade length 75 mm
Weight 115 g
Overall length
No. 718137
2_ 31.80
E 3`\`\{~;Z;
Practical kitchen aid and decorative object in one. The solid mortar is ideal for
preparing fresh, individual spice blends
and crushing herbs. The solid pestle
provides a good grip.
3
?&2=
Pestle: Overall length 190 mm.
&
No. 706163
'" 33.90
F ~~|<\`{\{Z;`;`
Beautifully grained chopping board for
cutting small objects in the kitchen. With
its practical handle it is also ideal for
serving food. With hanging eylet.
Dimensions 2?&?&
Weight '
No. 706168
'^ 9.90
G
G \~\;Z;<\3<;|\`
Z\;
One of the oldest cleaning agents in
Japan, bamboo vinegar can be used for
the following purposes : As a fat-dissolving cleanser (either undiluted or with
water added) in the kitchen, bathroom
or workshop. Particularly effective on cutting boards, work surfaces, knife blocks,
etc. For eliminating mould and insect
infestations in storage areas, textiles or
Tatami mats. For treating plants with
infested roots or leaves or as a fertiliser;
simply add some when watering. For
extinguishing unpleasant odours. Not for
consumption! Instructions included. 500
ml bottle.
No. 716249 ^'& &2 17.40
261
Kitchen Utensils
A ;\~#
In a traditional discus shape. The vividly
structured surface is decorated with a
pattern of spiral-shaped raised dots manually pressed into the sand mould.
&
Capacity &
Height 70 mm
No. 820040
&&_2 144.90
Note:
Unlike Chinese copies and similar
mass-produced items, the teapots offered here are guaranteed hand-made
by Japanese master craftsmen, with
the corresponding high standard of
quality and workmanship. The glazes
are guaranteed heavy-metal-free.
B
B ;\~`\|\\#<
Finely patterned, delicate teapot.
170 mm
Capacity 2
Height 2
No. 820025
_2 67.90
C ;\~Z
This elegant, discus-shaped teapot exemplifies the work of renowned designer
Hisao Iwashimizu. Its earthy structure
has a bluish patina, and contrasts with
the shiny black handle.
&2
Capacity 0.5 litre
Height 40 mm
No. 820302
_ 89.90
E ;\~Z\{\Z`\
With fine knobbly pattern.
Dimensions &?
No. 820301
&^^2 15.90
D ;\~\Z`\
Classic teapot with large volume and
traditional knobbly pattern.
170 mm
Capacity &
Height 95 mm
No. 820300
&" 146.30
262
D
F ;\~Z\{\`\`;
Decorated with a fine pattern.
Dimensions 150 x 18 mm
No. 820026
&2_ 19.90
G ;\~[\`3;`
Dimensions &?&?2
No. 820041
'"" 34.50
Kitchen Utensils
Cherry Bark Tea Box (Kabazaiku)
Kabazaiku, the traditional art of bark crafting, is especially common in the area around Akita, where the wild
]
=
craftsmen have been creating fascinating objects from cherry bark. To allow the bark to be shaped, it is first
cleaned and made supple with steam, then the pre-shaped pieces of bark are attached to the wooden object
with glue using a heated trowel. Cherry bark naturally keeps the air moisture relatively stable and is thus an
ideal material for tea boxes. A precisely closing inside lid preserves the aroma of the tea. The tea boxes are at
the same time useful containers and works of art.
A ;\<{;;
The four tea boxes made from highcontrast wood types are both functional
and make aesthetically pleasing design
objects. They are made of cherry bark,
American walnut, cherry wood and maple. The top layer of the laminated cover is
made of fine veneer. Inside container of
polished cherry bark.
80 mm
Capacity 180 g
Height 117 mm
No. 820312
&"&2 129.90
A
B
B ;\<\`\]Z
These boxes are made of multiple layers
of cherry bark. The top part of the core
container is polished, while the outside
retains its natural finish.
80 mm
Capacity 180 g
Height 115 mm
No. 820305
'^ 98.00
C ;\<=~Z;{
The inside container of this tea box is
made of metal and, like the spoon, is
covered with a layer of polished cherry
bark.
'^
Capacity 150 g
Height "
No. 820316
^&& 36.90
D
C
D ;\<~;`
Hand-made tea caddy of hammered
copper with precisely fitting inside
lid that preserves the teas aroma. The
manufacturing process requires a great
deal of skill and precision to ensure that
the countless hammer blows are struck
exactly. The patinated surface has an
interesting red-blue sheen.
With measuring spoon.
75 mm
Capacity 150 g
Height 115 mm
No. 820324
2&' 74.00
Tea bowls
Originally inspired by Korean folk art, the Japanese tea pottery perfected
itself fully over 1000 years. Despite variations in style and formal differences, the model for designing tea bowls was always the perfect beauty
of nature.
E ;\<[\[\
This delicate tea bowl bears the hallmark
of renowned designer Hisanori Masuda,
with a simple, harmonious shape that
fits perfectly in your hand. Lime green on
the outside, glazed white on the inside,
it turns tea-drinking into a pleasure for
the senses.
75 mm
Height 55 mm
No. 820303
&'2 15.30
F ;\<[ZZ;`\;=
#~;;Z;
;7 7
effect. After baking, the bowls are cooled
quickly and the difference in temperature creates an irregular network of fine
cracks. The set comprises five tea bowls
263
Kitchen Utensils
Cast-Iron Cookware
A `;~
Compact pot with even release of heat
from all sides, for cooking perfect rice
dishes. Retains heat for over an hour!
With enamel coating on the inside.
Suitable for all kind of stoves.
&
Capacity
Height 115 mm
Weight ^
No. 820320
_^&& 87.00
B GRILL PAN
Thanks to its removable handle, this
original pan can also be used in the oven
or under the grill. Its textured surface
ensures that nothing sticks. Comes with
serving board made from flamed cedarwood. Ideal for preparing and serving
shrimp or small fish. Not suitable for
induction and electric stoves.
Dimensions ?&?
Weight 1.5 kg
No. 820321
^ 59.90
retain heat and transfer it evenly to
the contents
7
conduction than stainless steel, so
the heat is distributed more evenly
in the pot and the contents are also
heated through the walls
=
heats up rapidly on/in induction
ovens
7
cookers and outdoors (with charcoal
and open fires)
B
C \#~`~Z;~\
Ideal for boiling, frying and steaming
vegetables and meat. The 1.5 kg lid can
be used as a separate frying pan. Comes
with wooden server with precisely fitting
recess. Suitable for all kind of stoves.
Height ^
Weight ^
Overall length 410 mm
No. 820325
'^&" 99.00
D
D CAST-IRON ROLL MORTAR
This utensil is as functional as it is easy
to handle. A few rolling movements of
the cast iron millwheel in the bowl and
the spice grains are ground. Cast in sand,
ground by hand to a perfect fit, sand
blasted, fire-bronzed with linseed oil to
a deep black colour. Manufactured in
Germany by hand.
Weight ^^
Overall length &
No. 719178
&^__ 158.00
E <`;`;`];
The simple, ergonomic form and its
perceptible self-weight make the rocker
knife a pleasure to use. It is individually
cast in sand by means of hand moulding.
The specially-composed alloy (high-purity
copper, tin and 1% silver) is characterised by its fine grain and hardness. It
does not affect the taste of food, even
when grinding hot spices or chopping
herbs.
Weight
Overall length 100 mm
No. 719175
&&&^ 137.00
264
B {`];3`
Whether hunting or trekking, you can
rely on this sturdy outdoor knife even
under the hardest conditions. The strong,
ergonomically shaped beech handle is
decorated with rivets. The bronzed blade
has a core layer of tough blue paper
steel (not rustproof), is 5 mm thick and
hand signed by the master blacksmith.
The meticulously worked robust leather
sheath has two fastening straps. It can
be worn on a belt.
Blade length &2
Blade thickness 5 mm
Overall length '
Weight '
No. 719284
& 169.00
D |];
Hand-forged knife with an
=
&2#
Znagashi steel and a core of blue paper
steel with excellent sharpness retention
$
?2`%
the signature of the blacksmith. Not
rustproof. Cord-wrapped handle, leather
sheath.
Blade length 90 mm
Blade thickness ^
Overall length ^
Weight &^
No. 719215
'^" 99.90
265
A |];\[\\\
With 11-layered Suminagashi blade.
Wooden oak-handle with red ray
skin wrapping. Magnolia wood scabbard
with leather mounts, belt loop. Urushi
varnishing.
Blade length &^
Blade thickness 4.7 mm
Overall length
Weight 180 g
No. 719268
&" 229.00
B
B |];\[\`
This sturdy knife will withstand all
challenges during your hunting or
trekking activities. The oak wood handle,
wrapped in black ray skin, ensures a
secure grip even under wet conditions.
Scabbard made of magnolia wood with
leather mounts, belt loop. Gunmetal
finished 11-layered with Suminagashi
pattern blade.
Blade length 110 mm
Blade thickness 4.5 mm
Overall length ^
Weight 190 g
No. 719260
&" 229.00
C |];Z\|`
Strong hunting knife with 11-layer
blade of Japanese damascus steel
and traditional buckhorn handle. For
this knife, Japanese buckhorn from Sika
deer from the Hokkaido region was used,
whose individual structure makes each
knife unique. Comes with strong leather
sheath with belt loop.
Blade length 150 mm
Blade thickness 4.8 mm
Overall length "
Weight
No. 719368
^&" 275.00
266
A ];[;``<\`\{;
With this generously dimensioned utility
knife the master blacksmith reanimates the traditional art of cherry bark
handwork (Kaba Zaiku). The beautifully
grained, breathing skin of the cherry tree
adds class to the handle and sheath. The
strong blade of 11-layered Suminagashi
steel is amazingly sharp and durable
even under the most demanding
conditions.
Blade length 155 mm
Blade thickness 5.5 mm
Overall length '
Weight
No. 709036
2" 265.00
B \`\{`];
A strong three-layer blade with
a cutting edge of white paper steel
makes this knife very sharp and durable.
The blade is reliably anchored in the
unvarnished wooden oak handle by a
hand forged ferrule. With leather covered
magnolia wood sheath.
Blade length &^
Blade thickness 5 mm
Overall length
Weight 170 g
No. 719280
&^2"_ 163.00
C \];
Purist:
The Konoha Hocho is characterised by
a clear form and rustic finish. Powerful
three-layer blade in a willow leaf form
(iron/White Paper Steel/iron), with an
akagashi (oak) handle, belt sheath of
formed naturally tanned leather and
karabiner.
Blade length 80 mm
Blade thickness ^
Overall length 185 mm
Weight 70 g
No. 719139
&&2'& 139.00
267
B |];[
\[{\{;
This exceptional knife features
a bowie blade. The hammered
surface adds to the archaic appearance.
The core layer of Blue Paper Steel (not
rustproof) is hard and tough at the same
time and may be honed to a razor sharp
^
nice structure. The Loveless design rivets
are made of stainless steel and brass.
This sturdy knife comes with a highquality saddle leather sheath (with belt
%
?2`
rustproof.
Blade length 110 mm
Blade thickness 4 mm
Overall length
Weight 170 g
No. 719349
&^&"^ 157.00
C
C |];[
{;Z;``[{\{;
Hand-forged fully integral knife
2#
7
Z|#
handle scales are made of desert iron
wood with a lively grain, two rosetteshaped mosaic pins adorn the handle
which has a hanging eyelet. Hand guard
is made of nickel silver. Delivery with
sturdy hand-made cowhide leather
sheath with belt loop. Hardness approx.
2`=
Blade length 110 mm
Blade thickness 4.5 mm
Overall length ^
Weight 190 g
No. 719525
&'" 498.00
268
D HIRO;`\ZZ
The classic hunting knife:
The combination of rustproof
\Z2 #
# 7
fine laminated wooden handle with
nickel silver fittings has proven its worth
thousands of times. This evergreen
hunting knife feels great in the hand and
is durable and reliable in even the most
demanding of outdoor activities. Leather
sheath with a belt loop. Hardness approx.
2`
Blade length 90 mm
Blade thickness 4 mm
Overall length 195 mm
Weight &^
No. 719506
'^ 98.00
A ];|`\|];
Clear, simple aesthetic design:
A very handy and elegant hunting knife
forged from a single piece of steel. The
#
{/?
sharp and wear-resistant. The handle
shells fit exactly and the ergonomic
handle ensures a good, secure grip. With
its 9.5 mm thick blade, this solid knife
is also capable of heavy-duty application.
Comes with robust hand-made, cowhide
7
"#2
HRC.
B |];{\`;ZZ
This fixed hunting knife is a
special gem, thanks to the all-over
decoration of its surface structure which
is created by controlled grinding. The
exceptional colour and look of the blade
is created by a specially developed heat
treatment. The handle scales are made
of a combination of ebony and leather
wrapping, and the curved handle provides a comfortable grip. The hand-made
cowhide pouch is sewn with an attractive
pattern, while the two adjustable hanging
loops allow the knife to be carried on a
belt either straight or at an angle. The
C Z;;|];3
This robust, handy hunting knife was
created in cooperation with the Italian
knife forum MCKF. Made from a single
{
4 mm thick blade, it is also suitable for
heavy-duty use. The fitted G10 handle
scales are attached with two screws
and the rough surface ensures a secure
grip. Comes with a robust brown leather
7
"#2
HRC.
Blade length 90 mm
Blade thickness 4 mm
Overall length 190 mm
Weight 170 g
No. 719596
'^ 98.00
1 Macassar Ebony
One of the densest and hardest woods in
the world. Jet black.
Blade length 90 mm
Blade thickness 9.5 mm
Overall length
Weight 185 g
No. 719586
&_2 259.00
269
B
A 1
2
1 Striped Damascus
Blade length 90 mm
Blade thickness 4 mm
Overall length
Weight 100 g
No. 709061
^^ 266.00
2 Rose Damascus
Blade length 90 mm
Blade thickness 4 mm
Overall length
Weight 100 g
No. 709103
^^ 266.00
B {`];;
Robust outdoor knife with
Z&_7
Stained and oiled masur birch handle
and reindeer horn ferrule with a hand
guard. Sturdy cowhide sheath with a belt
loop. Hardness 57 HRC.
Blade length 100 mm
Blade thickness
Overall length
Weight 100 g
No. 709093
2'"& 82.00
C `{|];
[{\3{Z\`~;;`
Z@
always sharp:
The outdoor knife features a stainless
&_7$_`%
handle of oiled masur birch with reindeer
horn ferrule. A diamond sharpener with
a fine and coarse side touches up your
knife wherever you are and whenever you
need it. Sharpener may be stored inside
the sturdy cow hide sheath.
Blade length 95 mm
Blade thickness ^
Overall length &
Weight 100 g
No. 709044
'^_' 99.70
D {`];]
Swedish utility knife with a
sharp carbon steel blade (Uddeholm No. 1770, not rustproof),
handle of Nordic masur birch, reindeer
7
;
vegetable tanned cow leather. Hardness
57 HRC.
Blade length 100 mm
Blade thickness
Overall length
Weight 100 g
No. 709060
_"' 69.00
E ]Z;`3\Z];
For filleting fish. Sleek, flexible blade of rustproof Sandvik
&_3
7
le and reindeer horn ferrule with hand
guard. Leather sheath with a belt loop.
Hardness 57 HRC.
Blade length &
Blade thickness &
Overall length
Weight 2
No. 709095
59.50
270
A `{|;Z
Ideal for hunting and trekking:
Robust, rustproof Sandvik
&_7=
of stained masur birch, brass hand
guard, leather sheath with belt loop.
Hardness 57 HRC.
Wilderness
Blade length 80 mm
Blade thickness
Overall length 195 mm
Weight 80 g
No. 709096
^ 63.60
The Boar
Blade length 95 mm
Blade thickness
Overall length &
Weight 100 g
No. 709097
22 67.40
Brusletto
The Norwegian traditional manufacturer Brusletto is producing knives
for hunting, fishing and outdoor activities for more than 100 years. Their
knives have always been designed and produced to be practical, handle
and blThe Norwegian traditional manufacturer Brusletto is producing knives for hunting, fishing and outdoor activities for more than 100 years.
Their knives have always been designed and produced to be practical,
handle and blade are worked to fulfill all functional requirements and
to lie well in the hand. The natural structure of wood creates a unique
pattern on each handle knife.
B <`Z; OUTDOOR
];`|\{
This classical Nordic knife was
developed over 100 years ago by
Rognald Brusletto, the founder of a blade
foundry that is now well known far beyond the borders of Norway. The compact
form makes it extremely durable, easy
to carry and suitable for wood carving.
`
Z&_7=
leather sheath with a belt loop. Hardness
57-58 HRC.
Blade length 2
Blade thickness ^
Overall length 170 mm
Weight 80 g
No. 708897
2_& 79.90
C <`Z;]Z;`3\Z
];]Z;`
A perfect knife for all fishermen.
The slim blade made of rustproof 440C steel is ideally for eviscerating fish. The handle combination of cork
and Nordic birch assures that the knife
wont sink in case that it will drop into
@
{
#
des leather case with belt loop. Hardness
57-58 HRC.
Blade length &
Blade thickness 1.7 mm
Overall length
Weight 55 g
No. 709252
_&"^ 85.60
D <`Z;<\3Z;
Hunting and Outdoor knife with
handle made of nice grained olive wood and aluminium ferrules.
The blade is made of rustproof Sandvik
&_
_#'
HRC. Delivery includes leather case with
belt loop.
Blade length &
Blade thickness ^
Overall length
Weight 150 g
No. 709253
"_ 109.80
E <`Z; TIUR
Hunting and Outdoor knife
7;
shaped handle of American
walnut tree wood with aluminum ferrule.
Blade made of rustproof Sandvik steel
&_
_#'`
Price advantage!
F {`Z;
Three things that people need for their
outdoor activities: Brusletto outdoor knife with a rustproof Swedish steel blade
and a leather sheath that can be carried
on a belt, the ultra-compact Japanese
G ]`;Z$[{3\`ZZ\%
;
}
When your matches and lighter let you
down, then you can always rely on the
fire stick to provide you with a warming
campfire. Simply rub any steel blade
across the fire stick to create a burst of
sparks large enough to easily light dry
paper or kindling. Magnesium stick with
a reindeer horn handle. With instruction
booklet.
Overall length 100 mm
No. 708890
&_2 12.80
271
A ]{|];MCUSTA,
KATANA
^#
7=
cutting edge of VG-10 steel. Suminagashi handle scales with diamondlike pattern and through-holes, very
similar in appearance to a traditionally
B ]{|];MCUSTA,
ALOA
Aloa coloured micarta handle
scales with belt clip, without
]>^^#
Suminagashi steel with a cutting edge of
VG-10 steel. Blade mounted free of play
C ]{|];MCUSTA,
ALUMINIUM
The blue anodized cut-outs
contrast beautifully with the
black aluminium handle. The belt clip
is directly attached to the steel plate
^#
D ]{|];MCUSTA,
COCOBOLO
^^#
7
a cutting edge of VG-10 steel.
The titanized stainless steel handle is
decorated with fine cocobolo wood grip
E HIRO SUMINAGASHI
Fine knives with eye-catching
blades of rustproof, wonderfully
patterned Japanese Damascus
steel. The typical wave patterns in the
^7
^^#
|#&
steel are a real eye-catcher, and the
1 Deer Horn
Handle scales made of Japanese
deer horn.
Blade length 75 mm
Blade thickness ^
Overall length 175 mm
Weight &
No. 719202
& 169.00
2 Cocobolo
Handle scales of polished cocobolo.
Blade length 75 mm
Blade thickness ^
Overall length 175 mm
Weight 100 g
No. 719224
&&2'& 139.00
F
F ]{|];`3\
These hand forged blades stand up
to the heaviest demands. The mechanics
and backlock are solidly made and show
1 Blade length 55 mm
Blade thickness
Overall length &^
Weight 50 g
No. 719513
_"' 69.00
3 Blade length 95 mm
Blade thickness ^
Overall length ^
Weight 190 g
No. 719515
'^" 99.90
2 Blade length 70 mm
Blade thickness ^
Overall length 175 mm
Weight 105 g
No. 719514
__" 89.00
272
A ~;;Z
This pocket knife is finely
polished and carefully finished
with the finest details. The
forged blades of rustproof Hitachi steel
$\Z2%
a polished nickel silver housing. Double
cam locking system (to prevent the cutting edge from damage when folding the
knife). Handle scales of waterproof, gluelaminated exotic wood. Hardness approx.
2`[
Blade length 85 mm
Blade thickness
Overall length 195 mm
Weight &2
No. 719503
2_& 79.90
B MINI FOLDING
];\<\
This Japanese mini folding knife with
handle scales of coloured abalone is a
real jewel. The lockable blade of highest
quality Gin1 steel (59 HRC, rustproof)
is impressively sharp. This knife will be
your constant companion as a fine key
ring or a piece of jewellery.
Blade length ^
Blade thickness 1.95 mm
Overall length 85 mm
Weight
No. 709034
&"^ 49.90
2
C HIGONOKAMI BURASU
Handle of folded brass plate. Triplelayered carbon steel blade (Blue Paper
Steel), not rustproof.
Blade length 80 mm
Blade thickness ^
Overall length &2
Weight 40 g
1 Without case
No. 719069
&'" 22.00
2 With soft leather sheath
No. 719070
_ 26.50
3 With stiff leather folding sheath
No. 719073
30.40
E ]{|;\;`\Z;
=7
Serves as a comfortable handle when the
knife is in use. For Higonokami pocket
_&"2"_&"_
No. 719072
_" 9.40
E
D
F ]{|];3\Z\\3
The Masanokami is a folding knife
with liner lock which looks like a
Japanese Higonokami. The supremely
elegant dark ivory shells on the steel
handle harmonise beautifully with the
black forging scale along the top of
the blade. The blade is made of Takefu
# /=
Blue Paper Steel and thus ensures a high
cutting grade. The knife has a thong hole
and comes with a nylon pouch. Hardness
approx. 58 HRC. Not stainless.
/}&#&&=
}#=[}&#&
Blade length 75 mm
Blade thickness '
Overall length 180 mm
Weight 70 g
No. 719447
&&& 144.00
D HIGONOKAMI KURO
Hammered blade surface,
handle made of galvanized sheet
metal and is gold-embossed on
both sides. Triple-layered carbon steel
blade (Blue Paper Steel), not rustproof.
Blade length 80 mm
Blade thickness ^
G MINI HIGONOKAMI
This fully functional miniature
version of the Japanese Higonokami will not only enrich any
knife-lovers collection but is also a useful
daily companion. Blade of triple-layered
steel (not rustproof), simple finish, brass
plate handle.
Blade length 40 mm
Blade thickness
Overall length 90 mm
Weight &2
No. 709043
'^ 9.90
273
1 Small
Blade length 2
Blade thickness
Overall length &2
Weight 40 g
No. 709300
& 14.90
B ]{|];~\~;`Z;
Convenient functionality,
original design and material:
Its extraordinary design renders this knife
unique and practical at the same time.
The details are convincing: The handle
is modeled on that of a razor, the lock
is formed like a sphere that snaps into
position in the groove designed for this
purpose, and the material used for the
handle is Paperstone. Paperstone is
produced from recycled paper, without
any formaldehyde added. Mixing the
paper with natural resins results in a very
tough material that is absolutely scratchproof, food-safe, and very hard.
C 3;`\`~;];
This folding knife is an icon of
German knife design and has been
produced almost unchanged since the
;
[
compact (only 7 mm thick) but almost
indestructible, it is a reliable companion
for all outdoor activities. The spring lock
and hand guard offer a high level of
E
E `\;<\;`]{|
~;];
The Lschenkohl factory in
Trattenbach is a relic of the once blooming foundry industry in Lower Austria.
The folding pocket knives have been ide7
&2
=
but hobbyists, hikers and craftsmen alike
can also appreciate these rustic folding
knives. Original shape, with turned beech
F ];~;{\[
;\;`Z;\
Hand-forged and fully functional:
This beautiful knife made out of carbon
$
?2&`%
handcrafted. Its ancient design makes it
very attractive and it is also fully functional. The dark scaled surface of the metal
is a nice contrast to the light brown
leather sheath. This leather sheath, with
integrated cut protection, made out of
high quality, plant tanned leather, is soft
to the touch and absolutely skin-friendly.
Overall length 95 mm
No. 719707
^^^ 39.90
2 Medium
Blade length 80 mm
Blade thickness ^
Overall length
Weight 70 g
No. 709301
&2 19.70
D ]{|];Z`{
~;\Z\
A rustic working and utility knife
with a simple but effective locking mechanism. The elongated back of the blade slides into the notch on the handle.
The robust plastic handle has two brass
screws for individual adjustment of the
locking mechanism. The blade is made
of Swedish carbon steel, which ensures
an extremely long edge life.
G Z`{;\;`\Z;~;\Z\
Leather pouch with belt loop, fits
G
Z
~
No. 709335
2 5.50
274
A Z;;
]{|;Z~;`\
The product line Opera has
been designed in cooperation with Max
Design, a well-known Italian artisan.
The result is a number of first class
utility knives with Back-Lock mechanism.
Different knife handle materials can be
chosen. The handy knives have a hanging
eyelet with twisted leather string. Delivery with leather belt pouch. Blade made
{
"#2`
1 Olive
Blade length 75 mm
Blade thickness ='
Overall length 175 mm
Weight 75 g
No. 709320
2 72.00
2 Buffalo Horn
Blade length 75 mm
Blade thickness '
Overall length 175 mm
Weight 80 g
No. 709321
22^" 79.00
3 Staghorn
Blade length 75 mm
Blade thickness '
Overall length 175 mm
Weight 100 g
No. 709322
_'& 93.00
B Z;; FOLDING
];~;`\{\3\ZZ
The most precious piece from the series
of Opera-knives has a blade made of rustproof powder metallurgically produced
damascus steel called Heimskringla.
The back of the blade and handle have a
decorative pattern. Olive wood has been
D
C
C Z;; FOLDING
];{\|;\
This knife has been designed in
cooperation with Max Design, a wellknown Italian artisan. The knife is equipped with a special locking mechanism
called TOL - Tactical Operation Lock
System designed by Lionsteel. This system locks the back spring creating a very
secure lock. A spring loaded lock release
allows opening and closing. The blade is
{=
3 &^
?2`
Blade length 70 mm
Blade thickness
Overall length 175 mm
Weight 70 g
No. 709229
'' 70.00
E
E ]{|];Z~`;
Practical utility knife with a
special locking mechanism - the sphere
at the end of the blade snaps into place
securely in a recess on the handle.
Loosening or tightening the screw on the
handle adjusts the smoothness of the folding mechanism. Made in Thiers, France.
Blade made of rustproof Sandvi steel
&_ {
Case.
D ~;`;\]{|];
Perceval, a French knife-making
atelier developed this elegant extremely flat folding knife in cooperation
with the Italian company Maserin.
The modern pocket knife is locked by a
frame-lock closing mechanism. The belt
clip which lies flat against the handle
is fitted with Torx screws and is thus
removable. The rustproof folding knife
7
&
3 &^
is mounted on
2#_`
Blade length 85 mm
Blade thickness
Overall length &
Weight 50 g
No. 709238
'" 33.90
F ;Z;;]{|];
Handle shells with an interesting grain pattern of American desert
ironwood make up the handle, which is
completed with stainless steel bolsters.
Hammer marks on the black forged skin
give this knife a rustic look. Only the
cutting edge is polished. The spring and
bee are forged from a single piece and
the back of the handle is decorated by
<
&_Z
=
2#_`
Blade length 90 mm
Blade thickness
Overall length &
Weight &
No. 709249
&&2'& 139.00
275
A 1
1 Ebne
;7 7
7
Z&_
Blade length 90 mm
Blade thickness
Overall length
Weight 90 g
No. 709050
2" 72.50
2 Tire-Bouchon
Finely polished ebony handles scales,
blade and corkscrew of rustproof Sandvik
&_=
Blade length 85 mm
Blade thickness
Overall length
Weight 90 g
No. 709055
2"' 82.20
3 Amourette
Fine scales of gorgeous grained snakewood give this Laguiole knife an individual and exclusive character. Spring
and Bee are forged from a single piece
and the elegant pattern on the blade
and spring back are handmade. Blade of
Z&_
Blade length 90 mm
Blade thickness
Overall length
Weight 100 g
No. 709218
'' 105.00
4 Buis
Forged blade of non-rustproof, carbon
steel that sharpens well and fine polished
french boxwood handle scales with brass
liners.
Blade length 90 mm
Blade thickness
Overall length
Weight 90 g
No. 709056
2" 72.50
5 Olivier
Handle made of intensely grained olive
wood with stainless steel linders. Spring
and Bee are forged from a single piece
and the elegant pattern on the blade
and spring back are handmade. Blade of
Z&_
Blade length 90 mm
Blade thickness
Overall length
Weight 85 g
No. 709143
'"" 107.00
276
A \|;]{|;Z
The Laguiole folding knife is
an icon of French design. The
trademarks of this classic knife
are the ergonomic shape of blade and
handle, the Bee stop and the fine
engraving on the spring. All Laguiole
L`Aiglon handles have the traditional
Shepherd`s cross of fine brass rivets
or silver nails. Shepherds bringing their
flocks to the Auvergne highlands used to
stick the blade into the ground and pray
in front of the cross. All blades and bolsters are polished to a mirrorfinish (except
= _"&^%{
leather
case.
B ]{|];<;~
Belt Pouch made from high-quality cow
leather, with snap fastener. Fits all Laguiole folding knives.
No. 709227
'& 9.70
6 Bois de Rose
Polished rosewood handle scales, spring
and Bee are forged from a single piece
and the elegant pattern on the blade
and spring back are handmade. Blade of
Z&_Z
steel bolsters.
Blade length 90 mm
Blade thickness
Overall length
Weight 90 g
No. 709135
"&2 109.00
A 3\Z;`]{|];=
;[{\{;
This hefty folding knife with
olive handle shells is completed
by large stainless steel bolsters. The
back-lock mechanism securely locks the
blade of rustproof 440 steel. With thong
=
2`
Blade length 75 mm
Blade thickness _
Overall length 185 mm
Weight 150 g
No. 709340
&"^ 49.90
C 3\Z;`]{|];\
Functional aesthetics:
In cooperation with Attilio Morotti, a
reputed member of the Italian knife
guild, these beautiful knives for everyday
use have been lovingly created down to
the last detail. The blade is locked with
an ultra-smooth liner-lock mechanism.
The all-round decorated stainless steel liners make a beautiful detail. The blade is
#
~3Z^
and can be opened with the thumb stud.
Comes in a soft leather pouch. Hardness
2`=
C 1
1 Burlwood Green
The handle scales of stabilised burlwood
are coloured green and, together with the
natural wood grain, make for an interesting colour structure.
Blade length 70 mm
Blade thickness ^
Overall length &2
Weight 75 g
No. 709343
'_^" 104.00
D ;;`Z]{|];
;}
Named after the French region of Thiers,
this folding knife will captivate you with
its elegant lines. The hand-decorated
spring and back part of the back of the
blade emphasise the stylish design and
catch the eye. Highly polished bolsters of
&_Z
the handle and join it seamlessly to the
7
?2#_`
Blade length 90 mm
Blade thickness
Overall length &
Weight 95 g
1 Handle material Juniper
No. 709257
22^" 79.00
2 Handle material Buffalo Horn
No. 709256
22^" 79.00
2 Burlwood Dark
The dark stained handle scales of dark
stabilised burlwood are shot through
with subtle shades of red and green.
Together with the natural wood grain, this
makes for an interesting colour structure.
Nickel-silver bolsters join the handle to
the blade.
Blade length
70 mm
Blade thickness ^
Overall length
&2
Weight 95 g
No. 709342
"_' 116.00
D 1
Robert David
Robert Davids family-run forge has
produced knives in different shapes
and with different handle materials
for four generations. The company is
based in the region around Thiers, also
known as the capital of French cutlery.
277
A 3\\~\;]{|;Z
Clear, elegant design with no frills - the
French master knife-maker Manu Laplace
has been developing and making folding
knives of timeless beauty and uncompromising functionality for five generations.
In his forge in Thiers, France, he creates
two series of knives. These small works
of art from the finest steels and woods
are a pleasure to touch and look at. The
compact knives of the 1515S series
make discreet companions, while the
full-size knives of the 1515 series suit all
purposes. With great attention to detail,
Manu Laplace artistically decorates the
individual models by hand - even the
back of the blade, the spring and even
the inside of the spacer on some models.
ZZZ&_
$'`%
Z&"_
the knives. Signature from the maker
Manu Laplace is located on the inside
of the spring. The blades are guided in
Teflon bushings and secured with an
easy-to-operate liner-lock.
Comes in padded gift box.
4 1515, Burlwood
The handle scales are made of
burlwood with a vibrant grain,
the reddish-brown colour contrasting beautifully with the dark blade.
The spring is decorated with hand-filed
leaves on both the inside and outside
to give it an ornate look. The blade
Z&"_ ?
coating.
Blade length 80 mm
Blade thickness '
Overall length
Weight 115 g
No. 709287
&_2 259.00
B
B <;~]`3\\~\;
]{|;Z&&
Cognac coloured, hand-sewn belt pouch
]
=
tanned leather.
No. 709259
&"^ 49.90
278
C ;\;``#~\Z;]`]#
{|;Z`Z`\|`\`Z
;?#=
#
case of fine brown calf leather provides
safe and compact storage for folding
knives and is convenient for travellers to
use. It is rolled and fastened with two
leather straps and can be hung on a hook
using the leather loop. It will accommodate up to 7 razors and/or folding knives.
Hand-made in France by Thiers Issard.
Length ^2
Width &
No. 709154
2 66.00
Paper Steel. The blades must be polished and sharpened. Double bevel.
1 Santoku
Blade length &2
Blade thickness 1.5 mm
Overall length
No. 719553
^'" 45.80
B <\{;<\Z=&\;`Z
These blanks consist of a total of 15
layers, with the cutting edge layer of
White Paper Steel. To bring out the
1 Usuba
Blade length &2
Blade thickness 1.5 mm
Overall length
No. 719556
2&2' 73.40
B 1
2 Gyuto 135 mm
Blade length &^
Blade thickness 1.5 mm
Overall length
No. 719590
^__ 39.00
2
2
2 Gyuto 135 mm
Blade length &^
Blade thickness 1.5 mm
Overall length
No. 719592
^_' 64.00
3 Gyuto 180 mm
Blade length 180 mm
Blade thickness 1.5 mm
Overall length _
No. 719591
^_ 52.00
4 Usuba
Blade length &2
Blade thickness 1.5 mm
Overall length
No. 719554
^' 45.70
4
4
C ]Z;{<\{;Z=&\;`Z
The 15-layer blades are sharpened and
polished. Cutting edge layer of White
3 Gyuto 180 mm
Blade length 180 mm
Blade thickness 1.5 mm
Overall length _
No. 719593
_" 84.00
4 Santoku
Blade length &2
Blade thickness 1.5 mm
Overall length
No. 719555
2 73.80
Paper Steel. Double bevel.
D
C
D ]Z;{<\{; VG-10
Superbly wrought ready-made blade with
a cutting edge of VG-10 steel (rustproof)
7^
steel. The many layers create the distinctive damask pattern. The blade has been
brightly polished and perfectly sharpened
by the Japanese master forge. Double
bevelled.
1 Usuba
Blade length &2
Blade thickness 1.5 mm
Overall length
No. 719558
_^^ 87.50
?2&`
Typ Gyuto
Blade length &
Blade thickness
Overall length &
No. 719584
&&2'& 139.00
2 Santoku
Blade length &2
Blade thickness 1.5 mm
Overall length
No. 719557
_^^ 87.50
3 Gyuto 135 mm
Blade length &^
Blade thickness 1.5 mm
Overall length
No. 719594
2&' 74.00
3
E
E \~\;Z;<\{;<\=AJIKIRI
For small chopping and rocker knives.
<~
Z
=^
= 7#
bevelled.
4 Gyuto 180 mm
Blade length 180 mm
Blade thickness 1.5 mm
Overall length _
No. 719595
_'"" 94.00
H
G
G 3\`;{\3\ZZ<\{;
This blade is perfectly suited to build a
pendant or carving knife. The core layer
of White Paper Steel is sandwiched
7^
Z
As all blades are handmade, they can
vary slightly with regard to form and size.
?2`
H \~\;Z;<\{;
`~;#\;`;{Z;;
The blade is well suited to make a knive
as every day companion, a neck knife
or a little hunter for the smaller tasks
in the forest Three-layered blade with a
cutting layer of White Paper Steel. The
rough forged surface of the upper part of
279
B 1
A Z[;{Z{\3\ZZ<\{;Z
Magnificently structured, rustproof
Damascus blades, manufactured using
powder metallurgy sintering and forging,
?&
annealed, martensitic structure, hardness
?2`
1 Rose Damascus
Blade length 90 mm
Blade thickness ^^
Overall length 145 mm
No. 709104
&& 131.50
A
1
2 Striped Damascus
Blade length 100 mm
Blade thickness ^^
Overall length 155 mm
No. 709092
&& 131.50
B ]`Z3`\<\{;Z
Three-layer carbon steel, for making
carving or outdoor knives. Middle layer
?2&` =
endurance, sharpens well, not rustproof.
C \`<Z;;<\{;Z
Uddeholm mono steel no. 1770,
$_=^Z=3%=
3
4
2
5
1 Blade length 60 mm
Straight blade.
Blade thickness 2
Overall length 170 mm
No. 709210
& 17.90
2 Blade length 60 mm
Curved blade.
Blade thickness 2
Overall length 170 mm
No. 709211
&&& 13.70
3 Blade length 75 mm
Blade thickness 2
Overall length &2
No. 709212
&^'_ 16.50
Blade length 75 mm
Blade thickness
Overall length 180 mm
No. 709076
'22 10.30
Blade length 80 mm
Blade thickness
Overall length 195 mm
No. 709077
'' 10.50
Blade length 90 mm
Blade thickness
Overall length
No. 709064
"^^ 11.10
E `33Z;;<\{;Z
For making nordic style knives.
Pre-ground and hardened to 57 HRC.
D <`Z;];<\{;
<\`|;
Short blade, ideal for a carving knife.
Blade made of rustproof Sanvik Steel
&_=
?'`=
pre-ground and tempered. Blackened
surface.
Blade length 50 mm
Blade thickness
Overall length 90 mm
No. 709126
&^^2 15.90
1
3
2
4
1 Blade length 75 mm
Blade thickness
Overall length 180 mm
No. 709073
&&^ 13.60
2 Blade length 80 mm
Blade thickness ^
Overall length 195 mm
No. 709063
&^ 14.70
3 Blade length 90 mm
Blade thickness
Overall length
No. 709075
& 14.90
pen the edge, attach the handle scales and maybe bolsters to the tang.
These blanks are entirely handmade, they may vary slightly in form and
size. Not rustproof.
$/&"}"6/&}_==3%
3
2
4
Z\|<\{;<\Z
1 Ladder Damascus
Blade length 90 mm
Blade thickness ^
Overall length &2
No. 719315
&"^ 49.90
280
2 Random Damascus
Blade length 105 mm
Blade thickness ^
Overall length 180 mm
No. 719316
^"_ 47.30
3 Rose Damascus
Blade length &
Blade thickness ^
Overall length 195 mm
No. 719317
2&' 73.60
4 Ladder Damascus
Blade length 95 mm
Blade thickness ^
Overall length 175 mm
No. 719318
64.90
Knife Kits
A `{Z\|<\{;<\Z
Blade blank for a Bavarian style hunter
with a stick tang (round). The blade
blanks are drop-forged.
2
B ]\|<\<\{;Z[
HAND GUARD
Full tang blade blank with hand guard,
largely finished. All you have to do is
sharpen the edge and attach bolsters and
handle scales to the tang, which is fairly
#
$
% 7 2
1 Random Damascus
Blade length 100 mm
Blade thickness 4 mm
Overall length &
No. 719319
2&^ 66.80
2 Ladder Damascus
Blade length 90 mm
Blade thickness 4 mm
Overall length &
No. 719427
2_& 79.90
]\|<\{;<\Z
1 Random Damascus
Blade length 100 mm
Blade thickness 4 mm
Overall length &
No. 719415
2&^ 54.90
2 Ladder Damascus
Blade length 90 mm
Blade thickness 4 mm
Overall length 195 mm
No. 719417
2&^ 66.80
D Z3\|\Z<\];
]{|];
Create a knife with an impressively
^^#
Z7
(middle layer of VG-10 steel). The handle
scales of select cocobolo wood are premounted. Fittings and plates of nickel
silver. Stable and attractive punched
leather sheath and belt loop for storage
Knife Kits
D
F
E
E HIRO]{|];
With this kit from the Japanese master
blacksmith Hiro, and a bit of manual
dexterity, you can build your own pocket
knife. Blade of rustproof Hitachi GIN1
steel, nickel silver fittings, handle scales
of glue-laminated walnut wood. With
F ]{|];`
A reliable daily companion - for selfassembly! Kit for a handy, light back-lock
knife. The micarta handle scales with an
ivory appearance are already fastened
to the plates and are outstandingly
suitable for scrimshaw decoration. Blade
of rustproof 440 A tool steel, nickel
G <\]{|];
Assemble your individual folding knife
@
Back Lock knife kit. The kit contains
all necessary components, including a
satined blade of rustproof Hitachi steel
$\Z2%=
#7
waterproof glue-laminated exotic wood as
H <`Z;];]\;
With these high quality components
and a small amount of work you can
build your own individual hunting knife.
Falken blade, walnut handle, sturdy
=
leather, inlay, needle, thread, rivet,
assembly instructions.
Blade length 85 mm
Blade thickness ^^
281
Knife Kits
A IC CUT{`];
Compose your own individual outdoor
knife with high quality components from
}^7
\Z2#Z=
=
flat-ground sides, hollow-ground cutting
edge, laminated cocobolo handle scales,
studs, sturdy belt-mounting leather
sheath, with assembly instructions.
C ]`\`{Z;];
Includes all the materials required
for making your own highly individual
Nordic knife. Hardened, pre-sharpened
Uddeholm No. 1770 carbon steel blade,
masur birch, reindeer horn slice, brass
Obsidian
C
B <Z{\];<Z;3`
Unique pieces:
The Hokkaido-based knife-maker Tokashi
Suemori learned the archaic art of
fracturing obsidian from the Ainu, an
ancient tribe in the north of Japan. We
are occasionally able to offer examples
of his work, with each piece having a
unique form.
282
Scissors | 289
283
;];\`][;Z\|
Sharpening pass
Two free sharpenings (see page 5).
Sharpening service
7
^=
7
]
=
7 will be sharp enough, but others will want to
7
nail, the cutting edge will yield already to light we recommend successive use of bio-dia-
?-
on unpasted leather.
@
Blade widths
round.
3
an unpasted strop.
should suit the size of the hand and the face.
^=
>}
\}]$# %
<}
C: Full hollow
=
^'='=&&&2=2'_'
284
A `\`Z~;`|3;
Slim, unpretentious razor with a narrow
& 73#
nufactured of historic blanks which were
forged decades ago in Solingen. Delicate
razors of this type are becoming increasingly popular, also among the ladies.
B ;{\{`\`
Handle scales made of high-grade
plastic, blade engraved with
Le Dandy. Blade with round
head and full hollow, polished
to a satin finish.
Blade length 70 mm
Overall length
Colour black
Blade width
'_ 97.90
'^" 99.90
C
1
C `\`[|{;|`\|'
The blade is etched with the black
wolf and ram logo and is additionally
7#
leaf. Blade with round head, full hollow
polished to a mirror finish.
1 Blond Horn
;7
horn.
Blade width 5/8
Blade length 70 mm
Overall length
No. 709015
&2_^ 199.00
2 Snakewood
Wood with a very vivid grain and
beautiful red-black colour.
Blade width 5/8
Blade length 70 mm
Overall length
No. 709016
&2"_ 202.00
3 Boxwood
The boxwood handle has a relief-like
structure with a floral design.
D `\`[;|`\|'=
STAMINA WOOD
The blade is etched with the black wolf
and ram logo. The red stamina wood
handle is extremely resistant to moisture.
Blade with round head, full hollow polished to a satin finish.
Blade width 5/8
Blade length 70 mm
Overall length
No. 709314
&&2'& 139.00
285
A `\`[|{;|`\|2',
DARK HORN
The blade is etched with the black wolf
and ram logo and is additionally decorated
7#
<
with round head, full hollow polished to
a mirror finish.These historical blades
were forged at the beginning of the 19th
century using the best Sheffield cast
steel. The back of the blade is decoratively
B `\`[;|`\|2'=
BLOND HORN
;7
The blade is etched with the black wolf
and ram logo. Blade with round head, full
C `\`2'=Z\;[{
Handles scales made of snakewood with
a very vivid grain and beautiful red-black
colour. Blade with round head, full hollow polished to a mirror finish.
E ;\;``#~\Z;]`
Z`\|`\`Z`]{|;Z
;?#=
#
case of fine brown calf leather provides
safe and compact storage for straight
razors or folding knives and is convenient for travellers to use. It is rolled and
fastened with two leather straps and can
be hung on a hook using the leather loop.
It will accommodate up to 7 razors and/
or folding knives. Hand-made in France
by Thiers Issard.
Length ^2
Width &
No. 709154
2 66.00
D ]`;[;Z\|Z;
A gem for those who like wet shaving:
This 7-piece wet-shaving set from Thiers
Issard makes shaving a pleasure. The
&&&27 #
is slightly less flexible when shaving than
a full hollow. On the other hand, this
=
which means that the razor is also wellsuited for beginners. Handle of creamcoloured plastic scales, blade with round
head, satin finish. Blade length 70 mm,
7
7
$&%
cream coloured handle fits the razor (No.
_""'%
$
709019) and the narrow strop with a
black, roughened side for the paste and
a fine leather side for stropping ensure
perfect sharpness. A soap dish made of
polished stainless steel ( 90 mm, 85 g)
with lid prevents your shaving soap from
dehydrating (No. 709197). The pleasant
lavender aroma shaving soap calms your
$ _"""%\
alum block for skincare after the shave is
kept safe in a sturdy plastic box and its
crystals ensure fast healing of small cuts
(No. 709195).
No. 709113
&'_& 221.00
F ;\;`\Z;]``\`
High quality calf leather case with leather tongue closing. Fits all Thier Issard
Razors. Ideal for travelling.
Version brown
No. 709159
& 11.90
286
A \~\;Z;`\`
The archetypal razor:
The knives offered here are created in
the workshop of the legendary blacksmith
Shigeyoshi Iwasaki, who is over 80 years
old. He produces them together with his
student Ryoichi Mizuochi. The knives are
made of finest carbon-steel, forge welded
in a charcoal furnace with Rentetsu iron
and polished on natural stone. Only those
pieces satisfying the stringent standards
of the master are certified with his seal
on the rear side of the blade. A fascinating cult object for collectors and users
alike. Provided in a lovely kiri wood case.
Not rustproof.
B Z\];`\`
^#
replaceable blades is considered by many
as the first mechanic razor for personal
grooming purposes. The model has a
protected comb with smooth edges and is
therefore also ideal for less experienced
users. The surface is chrome-plated, and
the handle fascinates with its particularly
smoothly chiselled surface.
One blade is included.
Overall length 95 mm
Weight 2
No. 709435
2'" 32.00
C `\`<\{;Z
10 Personna razor blades to fit safety
=
_"^
No. 709296
3.00
D
E
D Z\|<`Z;`ZZZ\`{=
<\{|;`\`=~\Z\{;
Overall length 105 mm
Colour
1 white
No. 709298
2 black
No. 709297
^'_ 41.50
^'_ 41.50
Mhle
Pure shaving culture made in
the Ore Mountains: High-quality
shavers, fine brushes and elegant
wet shaving accessories have been
producing in a small town called
Sttzengrn, located in the Ore
Mountains since 1945. Mhle
combines traditional craftsmanship
with trend-setting designs. The
results are beautiful and durable
products.
F 3;Z\|Z;#Z3=
^#~;;Z;
A visually perfect shaving set delivered in
a chrome stand.
The black high-quality synthetic resin*
handles show to their fullest advantage
as a contrast to the elegant chrome
fitting. Chrome is a corrosion-resistant
and durable material with an elegant
shimmer.
1
G 3;Z\|<[~`;\
The porcelain bowl is poured into multipart plaster moulds, trimmed by hand
and fired twice. The black colour glazing
takes places during the second firing
process. With platinum rim,
&
Weight 170 g
No. 709433
&_2 21.00
H 3;Z\~<[<;;[{
This stylish box made from black lacquered beech wood protects soaps against
moisture, dust and dirt. Ideal size for
our Thiers Issard shaving soaps (item no.
_"""_"&"%< ?}
2=
Weight 100 g
No. 709434
&" 13.00
I Z\|Z\~;`ZZZ\`{
Creamy, skincare shaving soap with
discrete scent. The warm lather opens
the pores of the skin, softens whiskers
while shaving and allows the blade to
glide over the skin more smoothly. Thus
the whiskers are not torn out but shaved
off cleanly, smoothly and painlessly.
Content 80 g
Model
1 Lavender
No. 709299 &&
2 Almond
No. 709194 &&
"& 11.20
"& 11.20
287
B \`Z|;;3\Z|]Z;=
^#~;;Z;
Three high-quality skincare products for
men in a decorative wooden box. The
|Z $ _"^^_%
ces a softly cleansing lather and leaves
a subtle sandalwood note on the skin. A
resealable aluminium container contains
ZZ $ _"^%
C
C KLARS
SHAVING SOAP,
\<;
With a fine note of
=
Content 500 g
No. 709336 2&
D ALUM CRYSTAL
SHAVING BLOCK
Shaving and disinfection block of pure
alum (a type of aluminium sulphate) for
small wounds caused by shaving. Haemostatic, astringent and antiseptic effect.
When dissolved with water on the skin,
alum disinfects and closes wounds. To do
this, one lightly rubs the moistened block
over the injured spot.
Content &
No. 709195 &'& &&& 13.10
&" 13.00
F
E Z\{\[{Z\|`;\3
Soft cream for the perfect shave with
pleasant sandalwood aromas. In plastic
container.
Content 180 g
No. 709022 &^& 24.30
For refining the blade between sharpenings, the sharpening paste is applied to
the rougher leather side.
&?_?
No. 709136
2 55.00
H ;`ZZZ\`{Z\`~;|~\Z;
The paste for regular, effortless use:
Thanks to its aluminium oxide abrasive,
which is less aggressive than diamond,
the Thiers Issard sharpening paste is
ideal for delaying the more complex
7
$
?
@^
weeks) a little longer. The paste is used
to retain the sharpness for longer and
77
^
or 4th shave. Rub a thin layer of paste
into the cotton side of a hanging strop or
the second leather side of the strop. First
sharpen on the paste side and then
finish on the leather side without paste.
Content 10 g
No. 709019 _& _" 5.70
H
2
G ~\{{;Z`~
French strop with different leather sides,
attached to a beech paddle with wood
ribs. These allow the strop to adjust to
the blade, similar to a hanging strop.
Sharpening paste can be applied on both
sides; the brown leather is suitable for
daily stropping.
1 Wide
;?
#
=7
7
Length 410 mm
Width 75 mm
Height
Leather surface ?_
No. 709024
52.90
2 Narrow in Synthetic Leather Case
Ideal professional strop for on the go,
thanks to practical storage in synthetic
leather case.
Length ^
Width ^
Height 15 mm
Leather surface &?^
No. 709018
&"^ 49.90
288
I <{\3{~\Z;Z=#~;;Z;
These Bio Diamond sharpening pastes
have a more fluid, water-based carrier
with no harmful chemical additives or
solvents and are therefore particularly
gentle on the skin. The fluid substance in
the handy dispenser allows easy and economical application. Normally the pastes
last for many years. The high content
of even-sized, sieved diamond particles
ensures fast and effective abrasion. Any
residual paste can be easily removed.
} 2
=
^
=
&
=
Content per tube 10 ml. $"_&%
No. 709125
& 119.00
J `3{;]Z|~\Z;
After sharpening with extra-fine diamond
==
is used to take the bite out of a too
aggressive blade, thus avoiding possible
irritation and/or razor-burn. Applied
on the fine leather side of an additional strop, this paste will give you the
smoothest edge youve ever experienced.
Oil-based carrier.
Content 50 g
No. 709124 ^='& &' 21.90
A HANGING STROP
Hanging strops are used to straighten
A
up razor edges, since they adjust to the
rounding of the blade. The supplied hook
is mounted on the wall and the strop is
hung on it with the attached swivelling
clamp. The swivelling clamp also allows
quick switching of the two sides. The
sanded top of our strops is made of
high-quality vegetable-tanned cowhide
$^%=?
soft. If required, the rear, cotton side
of the strop can be used with so-called
sharpening pastes, and thus serves as
a substitute for sharpening on a fine
honing stone.
1 Width 40 mm
A 40 mm wide strop requires a more
precise stropping technique than a wider
strop. The great advantage of a narrow
strop is that the leather hardly bends
along the narrow width. This ensures
exquisite sharpness.
Length 2"
Cutting length ^"
No. 709138
^^_ 40.90
B
B
\||Z`~Z\`;`Z;
Price advantage
2 Width 80 mm
With its 80 mm width, this strop is ideal
for beginners, since they can draw the
razor at a right angle along the whole
width.
Length 2"
Cutting length ^"
No. 709139
^' 54.00
Strop
During shaving, the ultra-fine edge of the razor bends when it meets a beard hair.
7
7
$
hours), but stropping removes it completely. The razor strop works like a burnisher
with a conventional blade that is not sharpened but cuts only with the fine rised burr.
Hanging strop / paddle strop with ribs
Basically, hanging strops and paddle strops require the blade to be managed in the
same way. The type of strop is more a matter of taste. The fine ribs in the wood of
the paddle strop create an elasticity that feels similar to stropping on a hanging
strop. Both types are available in two widths. On the narrow version, the razor must
be handled differently than on the wide version. On the narrow strop, you must draw
7
=
7
Professionals, however, can strop individual parts of the cutting edge with much
more control on a narrow strop. The narrow width also reduces bending in the
transverse direction. On a wide strop, you can draw the blade in parallel to the edge
of the strop, which is much easier to learn for a beginner.
Scissors
G
Two free sharpenings.
G `\{\;Z;ZZZ`Z
Universal stainless steel scissors. The
handles are decorated with cranes, which
in China symbolise wisdom and a long
life. The brass screw allows you to adjust
the smoothness and disassemble the
scissors for sharpening.
C
E
H
C \|\#\|`=\{#]`|;{
Hand-forged, double-layered steel blade,
bronzed black finish, finely ground edge.
Overall length 150 mm
Blade length 2
Weight 2
No. 718127
&^ 29.90
D
D SISHU NIGIRI
Double-layered steel, bronzed black finish.
Overall length &
Blade length 55 mm
Weight
No. 718106
' 23.90
E ZZ|`=\{#]`|;{
Hand-forged, double-layered steel blade,
extra finely ground edge, very sharp.
Overall length 105 mm
Blade length 45 mm
Weight
No. 718105
'" 33.90
F
F MINI NIGIRI
Silk cord wrapped handle, solid blade,
standard ground edge.
Overall length 75 mm
Blade length _
Weight 10 g
No. 718101
' 6.90
1
H \#~`~Z;ZZZ`Z[`\{\;Z;{;`\
Traditional universal Chinese scissors of
stainless steel with beautifully decorated
handles. The brass screw allows you to
adjust the smoothness and disassemble
the scissors for sharpening.
2
1 Large
Overall length 155 mm
Blade length 50 mm
Weight 85 g
No. 708212
"&2 10.90
2 Small
Overall length &
Blade length ^
Weight 45 g
No. 708213
_'
2-Piece Set
No. 708214
8.90
Price advantage
& 16.90
289
A {;;\`ZZZZ`Z
;?
# =
blades, gold-plated handles, righthanded. The blades are sharpened by
hand, and promise an extraordinarily long
service life.
Overall length 2
Blade length 115 mm
Weight _
No. 718132
'^ 98.00
B
C
B ~`];ZZ\\`ZZZZ`Z
Top-quality tailors scissors made of
finely polished high-performance Yasugi
carbon-steel. Double-layered, hardened
2`=7
C TAILORS SCISSORS
Double-layered steel.
Overall length
All-Purpose Scissors
E
E `\{\\~\;Z;
Z;{ZZZ`Z
Wonderfully lightweight (80 g) and with
high-precision cutting, these hand-forged
scissors are outstanding in both form and
function. Double-layered steel. Adjustable cutting action.
Overall length 185 mm
Blade length 70 mm
Weight 80 g
No. 718147
^_& 41.30
F ]`;Z;{ZZZ`Z
AND FABRIC SCISSORS
Strong, classical, multipurpose handmade scissors for cutting fabric, paper and
thin leather.
Overall length 170 mm
Blade length 70 mm
Weight 75 g
No. 708142
_^" 32.60
G ]`;Z;{\{Z;[|
SCISSORS
;?
3
#
me-plated carbon-steel.
Overall length 140 mm
Blade length 2
Weight ^
No. 708141
&'_ 22.30
~
7
#
handles with ergonomic bows for
a good grip.
Z =
rubber stopper.
` 7
]
7
/
stainless steel.
Hollow-ground backs and manually
sharpened facets for a clean cut.
&
290
H \`|ZZZ`Z{#;
Z~;`
Thanks to their ergonomic asymmetric
handles, these scissors are very comfortable to hold. Adjustment screw and
finger rest with gold-coloured coating (TiN).
I \`|ZZZ`Z{#;
CLASSIC
The classic straight shape ensures
optimal balance.
Sickles | 307
291
Garden Tools
Two-Handed Hoes
A |[;;{;=Z\;ZZZ;;
Low-maintenance:
Weighing just over one kilogram, this
handy hoe with a slightly concaved,
tapered blade is particularly light and
there-fore recommended for lady gardeners. The narrow blade enables precise
work around existing plants, a particular
B [#\{;{;=\`<Z;;
Powerful hoe for digging, loosening soil
and planting.
Blade ?'
Overall length &
Weight 1850 g
No. 717921
64.90
C Z;;
For weeding and loosening the soil. The
sharp, slightly drop-point blade cuts even
through thick roots. Double-layered steel
blade, pasania wood handle.
Blade &^?&
Overall length &
Weight 970 g
No. 718155
&"^ 49.90
D [;;{|;
Light, hand-forged hoe with a good
balance and a sharp two-layer blade. The
tang is secured irremovably in a forged
ring on the untreated tough Japanese
E `;|;
With a saddle-shaped blade, for drawing
furrows and making piles. Handle made
of ramin.
Blade ^?&
Overall length 1450 mm
Weight 1000 g
No. 717906
&" 48.90
F [;;{|;
Combination of a sharp sickle blade and
a seven-tine rake for weeding large areas.
Menpisang handle.
G ;{||];
Heavy forged blade with hardened
cutting edge, ideal for cutting off lawn
edges. Hardened carbon-steel.
Blade _?&
Overall length &2
Weight &
No. 718154
2" 74.90
292
Blade 2?
Claw 75 x 185 mm
Overall length 1500 mm
Weight 1000 g
No. 717922
&"^ 49.90
Garden Tools
One-Handed Hoes
For loosening and arranging soil around plants. Springhammer forged from high-quality carbon-steel, hardened cutting edges. Tapered blade to improve strength and balance. Handles made of Jap. white oak where not
otherwise stated.
C
A
A ~\|;
Tapered blade.
Blade &^?_
Overall length 405 mm
Weight 450 g
No. 717902
&'' 18.90
B {<;;
With hoe and pick.
Blade &?
Overall length 405 mm
Weight 550 g
No. 717904
&"'^ 23.60
C ~`|;
With wide hoe and prongs.
Blade '?2
Claw 105 x 70 mm
Overall length 405 mm
Weight 550 g
No. 717903
&"'^ 23.60
D ;#\{;{
`;|;
Lightweight hoe for careful work in
densley grown beds. Double-layered
blade. Pasania handle.
Blade 140 x 55 mm
Overall length 400 mm
Weight &
No. 717905
&' 21.90
Gardening Claws
For loosening soil for better aeration and nutrient
absorbing and removing deeply-rooted weeds.
E |`<<;`
Robust, forged 5-tine claw with extralong ash handle, ideal for raised beds.
The angled head allows ergonomic
positioning of the hand.
Claw 95 x 100 mm
Overall length 910 mm
Weight ^
No. 717968
^^ 27.40
F
F |#~`|`\;
Deep-reaching, strong triple prongs for
loosening soil and exposing roots.
Japanese white oak handle.
Claw 115 x 100 mm
Overall length ^
Weight ^
No. 717914
&^" 16.60
H
G ^#~`||\`{;|\[
]
;
handle.
Claw 70 x 50 mm
Overall length &
Weight &2
No. 717911
&' 18.80
H Z|;#~`|\[
Z
;
#
shaped magnolia handle.
Claw length 75 mm
Overall length &
Weight &
No. 717910
&^^2 15.90
I
I \Z~\[\[
Ideal for digging up and removing deep
roots. Forged hook mounted in an iron
sleeve. Japanese white oak handle with
knob.
Claw length 95 mm
Overall length ^'
Weight ^
No. 717909
_" 29.50
293
Garden Tools
B |\`{;;`ZZ~\{;
Through its extra long socket which is
double riveted into the handle this spade
is made for digging and turning over
soil as well as for in depth loosening
of ground. An edge tread protects your
shoes from damage. A special hardened
blade allows for better spring and at the
same time decent hardness. The shaft
made from high quality ash is bent in the
lower part for ergonomic reasons.
Blade '?&'
Overall length 1150 mm
Weight &
No. 717944
_^ 56.20
D
C `Z;<;{]`
This two pronged rose fork is used for
planting roses and aerating rose roots
with ease. This is especially important
as aeration encourages root growth. In
order for them to be able to free minerals
it is essential that the soil bacteria have
D ~\|`[;=
Z\;ZZZ;;=Z3
Durable all-steel trowels for digging
small planting holes and repotting house
plants. Narrow, lance-shaped blade with
depth indicator.
F ~\|`[;
This forged planting trowel is a handy
tool for planting and bedding out young
plants as well as digging out stubborn
weeds. The elliptical blade with a slight
tip and a sharpened all-round edge is
particularly suitable for hard and stony
ground.
Blade &2?'
Overall length ^
Weight _
No. 717969
&^^2 15.90
Blade 150 x 80 mm
Overall length ^
Weight 2
No. 717973
22
E ~\|`[;
Robust planting trowel with stainless
steel blade for planting young plants and
for other general gardening work. The
dark-stained ash handle provides a comfortable grip and is attached to the blade
with a solid stainless steel ferrule.
7.90
H
G
294
8.90
G \~\;Z;~\|;
Dibble with a practical knob handle and
stainless steel tip. Plastic body with
scale, zinc-plated steel core.
Overall length &
Weight '
No. 717924
'' 10.50
Blade &?2
Overall length '
Weight 170 g
No. 717925
_'
H ]`|;{Z;
Very tough:
This forged shovel bribes through its sturdiness. A solid spring socket on the head
fixes the untreated ash handle. The hardened and tempered shovelhead out of
alloyed steel has a gill for more strength
and is pointed towards the end to ease
the gathering of soil and stones.
Shipping is only possible within
Germany.
Blade _?'
Overall length 1550 mm
Weight ^
No. 717930
^"& 46.90
Garden Tools
A \{Z\<;;\]#`\;
This tough and at the same time light
leaf rake can be changed in width from
^ = 7
gather yet the smallest leaves and grass.
;77
A thump nut on the back of the rake
allows for easy adjustment.
B \{;
A tool handle made of untreated pine
rests well in the hand and is low in
]
_&_"
Garden Knives
C |`\]|];=
[]{|<\`];`
Precise grafting guaranteed:
The special blade form makes this knife
ideal for vine grafting. The folding bark
lifter is made of antibacterial brass.
Carbon-steel blade.
Pastic handle scales.
Blade length 2
Overall length 170 mm
Weight 90 g
No. 709310
24.30
D TINA|`\]|];
Beautifully shaped grafting knife
with bark lifter on the back of the blade.
The narrow point of the blade makes it
ideal for rose grafting. Tina, a company
from the south of Germany, has been
making garden knives for more than 150
E
F `Z;`|`\]|];
Classic garden knife for plant cuttings and slim wood shoots. The sickleshaped blade allows small branches to be
pressed into the cutting edge. This knife
E `|`\]|];
Versatile Swiss-made grafting knife
with stainless steel blades. The straight
blade with curved tip is particularly
suitable for grafting fruit trees, while
the curved blade is used to prune trees
G
G \~\;Z;|\`{;];
Powerful garden knife with a curved
carbon-steel grafting blade and a large
handle made of untreated bubinga wood.
With hanging eyelet.
Blade length 75 mm
Overall length 195 mm
Weight &
No. 709169
&&&' 13.30
H \~\;Z;~\|];=
[Z\;
For digging out plants and digging precise planting holes. The shovel-shaped
stainless-steel blade has a 15 cm scale
and is ground on both sides. One side is
serrated. Non-slip plastic handle with an
I
J
I Z;];\3\
Sickle-shaped knife with waved edge for
weeding and harvesting flowers, herbs
and vegetables. Stainless steel. Beech
handle.
Blade length 140 mm
Overall length _
Weight 75 g
No. 718158
_' 8.90
J \~\;Z;~\|];
With its pointed form with a hollow rear,
the Japanese garden knife is suitable
for both planting and for exposing and
moving potted and outdoor plants. The
toothed blade serves to cut roots and
branches. Hardwood handle, sheath with
295
Garden Tools
Pruning Saws
Professional Japanese pruning saws help to maintain and care for lumber
and ornamental trees. Trees with cleanly cut off branches, such as those
cut with a sharp Japanese saw, are less susceptible to fungal or bacterial diseases. In contrast to the widely available average quality low-cost
products, all our pruning saws are manufactured in Japanese master
workshops. The teeth are razor-sharp and the blade surfaces are hard
chrome-plated and therefore corrosion-free. The tips are hardened to
maximise the saws durability and resistance to breakage. Replacement
blades will be available for many years to come.
A
A SILKY~;<
Whether on the building site, in the workshop or for outdoor use, this compact
folding saw with its razor-sharp teeth
runs rings around many large saws. For
crosscuts and ripcuts.
B
C
C \~\;Z;]{|Z\[
{;;
The details make the difference to industrially-manufactured series products. For
example, the blade of this saw is taper
=
polished to make cutting even easier.
Clearing teeth prevent clogging. Manual
straightening on the aligning anvil by the
master saw-smith himself ensures that
the saw blade runs smoothly.
E
D
D `3]{|Z\[=
\`Z;
Optimum cutting performance in wet
wood, both across and diagonally to the
grain.
296
E SILKY\\\]{|Z\[_=
\`Z;
The most universal folding saw:
Robust folding saw with excellent cutting
performance for larger sections (carpentry), insulation material and pruning fruit
trees. Cuts across and diagonally to the
grain - also in wet wood.
Garden Tools
A SILKY<|<^2]{|Z\[=
\`Z;
The perfect saw for carpenters working
with large timbers:
With its curved cutting edge and wider
tooth spacing, this version of the Big Boy
is ideal for cutting off large branches
from decorative and fruit trees as well as
for use in forestry
C ;`Z\~`|Z\[
An excellent handy all-round saw for the
hobby gardener. Comfortable pistolshaped handle and hardwood sheath.
Without setting.
Blade length &
D
PRUNING SAW CLASSIC
These pruning saws are made exclusively
for DICK customers by a leading Japanese manufacturer. Its slender design makes it ideal for pruning fruit trees, trimming hedges and bushes. Taper-ground
blade with coarse trapezoidal toothing for
Key to Pictograms:
General pruning
These saws allow quick cuts
to the disadvantage of less
smoother surfaces through a
medium wide setting.
Forestry work
Robust saws which thanks
to wide setting are suited
best for forestry work.
Fruit tree pruning
Slightly set saws offer
smoothest surfaces which
minimises the risk of fungal
or bacterial diseases.
297
Garden Tools
-Saws
Professional saws featuring optimum tooth spacings and shapes for specific cutting situations. The hard-wearing, ergonomic handle snaps on easily and securely in the supplied plastic sheath with belt loop.
A FUGAKU;{\
The combination of taper-ground saw
blade and curved tooth line makes this
saw the ideal tool for trimming and fruit
tree cutting in the garden.
Taper-ground blade:
\
#
run off quickly and thus prevents
rotting
Curved blade:
$
cutting)
|
Blade width 50 mm
Blade thickness 1.1 mm
Setting 1.4 mm
Crosscut teeth 4 mm
B FUGAKU NAMAKI
This saw is particularly suitable for trimming cuts in the garden and forest and
for cutting dead wood.
=
handle, make it easier to start a cut
and reduce the cutting force required
Blade width 40 mm
Blade thickness 0.9 mm
Setting &^ mm
B
A
C
C FUGAKUZ;;
The taper-ground blade creates smooth,
clean cuts, making it ideal for cutting
fruit trees.
Taper-ground blade:
\
#
run off quickly and thus prevents
rotting
E
E Z~;`Z~;;{~`|Z\[
The curved, taper-ground blade ensures
extremely high-performance cutting and
is capable of dealing even with thick
7
;
=
7
handle. Comes without sheath.
Blade width 50 mm
Blade thickness 1.1 mm
Overall length 485 mm
Setting 1.4 mm
Crosscut teeth 4 mm
No. 712173
2& 26.90
Repl. Blade No. 712174 &2_ 19.90
]
by hand
Z7
#
therefore rustproof
and improved control
Z
teeth are only slightly angled and thus
act as raker teeth
298
Garden Tools
A \~\;Z;;;Z~
PRUNING SAW
Light but stable telescopic saw for tree
care, which can be perfectly adjusted
to any cutting height thanks to its
continuously extendable aluminium
pole. Slim blade with proven Japanese
B SILKY TSURUGI
The ultra-slim blade makes this saw ideal
for trimming in tight spaces such as
among branch forks or in thick bushes.
The removable rubber handle shells reduce vibrations during cutting enormously.
Comes in a stable aluminium sheath.
C KOBIKI CLASSIC
Traditional Japanese forest saw with
modern design. Cuts even branches as
thick as an arm with just a few strokes.
Angled, black varnished wooden handle
and wooden sheath.
Blade length ^
Blade width 40 mm
Blade thickness 0.9 mm
2
Setting 1.4 mm
Crosscut teeth 4 mm
No. 712175
&^ 29.90
Repl. blade No. 712176 &2^ 19.40
D <\`;]`;ZZ\[
Large robust saw for cutting thick
branches and felling small trees. A large
D handle provides a comfortable grip
with work gloves. The unset raker teeth
with wide spacing reduce the cutting
force on the other teeth, thus increasing
the edge life and preventing the saw cut
from clogging. Hard-chromed (rustproof)
blade with impulse-hardened teeth for
F
E
E SILKY~`|Z\[\3Z`3;
Robust, torsion-resistant saw for forest
work with long handle to allow use with
both hands
#
7
configuration for smooth, clean cuts
and low friction
]
by hand
#
tive cuts
#
7
grip
` 7
<
#
Blade length ^_
Blade width 55 mm
Blade thickness 1.5 mm
Overall length 2
Setting &2
Crosscut teeth ^
No. 712078
_'_ 92.90
Repl. blade No. 712079 2&^ 54.90
Key to Pictograms:
F [`;Z\[
Ideal for camping and
trekking:
Our most compact
saw consists of a spiral toothed wire with
two pull rings. It can
even be used to make
a very effective frame
saw with the help of a flexible branch.
Cuts wood, plastic, plaster, limestone
and metals. 1 mm.
Overall length 500 mm
Weight &
No. 712520
' 6.90
General pruning
These saws allow quick cuts
to the disadvantage of less
smoother surfaces through a
medium wide setting.
Forestry work
Robust saws which thanks
to wide setting are suited
best for forestry work.
Fruit tree pruning
Slightly set saws offer
smoothest surfaces which
minimises the risk of fungal
or bacterial diseases.
299
Garden Tools
A SILKY |<;;Z~Z\[
Long and extremely effective:
The Silky Longboy telescope, folding
saw is the first choice of professionals
working in forestry and for fruit tree care.
clean cuts
#
#7$
#
=
easy cleaning)
Z#
points for long service life
7
branches
Z7
7
<
#
Blade length ^2
Blade width 55 mm
Blade thickness &2
Overall length &'@^
Crosscut teeth ^
Weight &
No. 712050
2" 265.00
Repl. Blade No. 712051 &"^ 49.90
B <\`;;;Z~Z\[Z
Value for money:
These telescopic tree-care saws will
impress you with their practical design
and high-quality workmanship.
C SILKY~`];ZZ\
;;Z~|Z\[Z
For professional use:
Superlative saws in a class of their own
for professional use in tree care and
forestry.
B
]
by hand
<
locking clamps on the handle
<$
#
=%
7
and trimming small branches and to
prevent slippage
#
blade for easy transport
`
the saw cut and extend the edge life
<
#
1 Three-Part
Blade length ^
Blade width 2
Blade thickness 1.5 mm
Overall length @&
Setting
Crosscut teeth
Weight 2_
No. 718247
&_'& 212.00
Repl. Blade No. 718249 2" 72.50
1 Three-Part
Blade length ^"
Blade width 2
Blade thickness 1.5 mm
Overall length @"
Setting
Crosscut teeth 4.5 mm
Weight
No. 712046
' 239.00
Repl. Blade No. 712047 22& 74.50
2 Four-Part
Blade length ^
Blade width 2
Blade thickness 1.5 mm
Overall length '2@2&
Setting
Crosscut teeth
Weight ^
No. 718248
'2 289.00
Repl. Blade No. 718249 2" 72.50
2 Four-Part
Blade length ^"
Blade width 2
Blade thickness 1.5 mm
Overall length @2^
Setting
Crosscut teeth 4.5 mm
Weight ^
No. 712045
"22 309.00
Repl. Blade No. 712047 22& 74.50
Key to Pictograms:
General pruning
These saws allow quick cuts
to the disadvantage of less
smoother surfaces through a
medium wide setting.
Forestry work
Robust saws which thanks
to wide setting are suited
best for forestry work.
Fruit tree pruning
Slightly set saws offer
smoothest surfaces which
minimises the risk of fungal
or bacterial diseases.
300
D {\3{Z\[];
Saw file with wear-resistant, diamondcoated surface, especially for very hard,
tip-hardened teeth.
Cross section '
Width
Cut length 100 mm
No. 712802
'" 33.90
Garden Tools
A ~`|Z;\`Z
For trimming fruit trees, hedges
and decorative wood.
Max. branch diameter &@
Overall length
Weight
No. 707489
&'^ 128.90
B `Z;\{\`;Z|Z;\`Z
For pruning rose trees and harvesting
fruit, grapes and flowers.
Blade length 55 mm
Overall length
Weight &2
No. 707490
"&"^ 109.40
C Z\;ZZZ;;
~`|Z;\`Z
;
}
Master craftsman Nakajima makes these
exceptional quality pruning shears from
solid rust-proof stainless-steel. The
sturdy, high-gloss polished blades with
case-hardened blades cut twigs and thin
branches effortlessly without damaging
F ;\;`\Z;
]`~`|Z;\`Z
Saddler quality, with belt loop.
] _&'&&=_&'&_=_&'&_^=
_&'&^^=_&'&2"=__'_
No. 718118
& 14.90
the plants. The structured grips are nonslip and comfortable to hold, and warm
to body temperature within seconds.
Max. branch diameter &@
Overall length
Weight 2
No. 718172
"& 109.60
Leather Case No. 718118 & 14.90
D `;;\{;Z;\`Z
Shears with extremely sharp cutting
edges, ideal for cutting fruit trees, rose
bushes and vines.
Finely polished blades with outstanding
durability, ergonomically forged handles,
E |]Z;~`|Z;\`Z
\{;\;`\Z;
@
very valuable gift set: a pair of extra
strong pruning and garden shears (No.
718115) with leather case (No. 718118)
in a very attractive gift box.
No. 718186
_ 89.90
G
G ~`|Z;\`Z
[;\;`[`\~~|
Sturdy, forged shears (C-58-steel) made
for effortless cutting through branches
and twigs. Smooth leather is rustically
strung around the curved handles,
contoured to fit the heel of the hand.
The shears therefore lie comfortably in
the hand. They are easy to clean after
finishing work, as the cutting edges are
polished so that dirt can hardly cling
to them. The leather wrapping can be
easily replaced, making these shears a
companion for life.
Max. branch diameter &@
Overall length
Weight '
No. 718133
2_& 79.90
Leather Case No. 718118 & 14.90
Replacement Leather Wrapping brown
No. 708920
double-layered blade.
Max. branch diameter &@
Overall length
Weight
No. 718115
'_ 69.90
Leather Case No. 718118 & 14.90
H ~`|Z;\`Z
3\`;;`Z
Full cutting power in a miniature version:
KSmall, handy, and effective, these
shears will fit into any pocket and you
will always have them within reach. An
ideal companion for easy garden work
and to take along, they effortlessly cut
small twigs, rose shrubs or flowers. The
rattan wrapped handle lies naturally and
comfortably in the hand. Sturdy blade
made from C 58 steel.
Max. branch diameter &@&
Overall length 145 mm
Weight &
No. 718184
=^ 59,90
Key to Pictograms:
Bypass shears
Precise, clean cuts, ideal
for cutting green wood.
&&2' 13.90
301
Garden Tools
A ;`|3~`|Z;\`Z
Thanks to their ergonomically
formed, extra-wide handles, these garden
shears are comfortable to hold, even
during extended use. Forged of extrahard White Paper Steel, they are ideal for
C `Z;Z;\`Z
The slender blade is particularly
suitable for cutting roses and grapes,
removing flowers and precision trimming.
The fitting can be adjusted.
E <[{Z;\`Z
For pruning bushes and decorative
plants there simply is no better tool
than the Hakari Hasami. Forged from
a single piece of steel, with mirrorpolished flanks. The easy action of these
shears makes pruning with them truly
B ~`|Z;\`Z
Feather-light shears with non-slip coated,
easy to hold metal handles.
Max. branch diameter &@
D ~`|\{\`;Z
Z;\`Z[;\;`Z;\
A powerful tool for ambitious gardeners.
They feature a visual, colored handle
with a soft cushion to ensure superior
handling. To facilitate work a spring
between the handles causes the jaws to
open again after closing. The replaceable
blades are
made of
carbon-steel,
take a fine
edge and
stay sharp
for a very
long time. Spare blades and springs are
available.
Max. branch diameter &@
Overall length &
Weight
No. 718191
"^^ 34.90
pleasurable.
Hollow-ground, spring-return blades,
adjustable. Handle with hand guard.
Blade length &
Overall length 2
Weight
No. 718166
2_& 79.90
F `33|Z;\`Z
These trimming shears are exactly right
when it comes to harvesting fruits or
thinning out your shrubs. The slender,
tapered shape of the forged cutting edge
will allow you to access even stems in
the back or fruits hidden behind leaves.
The non-slip, roughened surface lets
the handles lie well in the hand and the
safety latch can be easily locked.
G ARNO]`;~`|
Z;\`=;[{
Strong shears primarily for pruning
fruit trees. The olivewood handles rest
comfortable in the hand. Drop-forged,
selectively hardened carbon-steel with
hardened blade inserts. Hardness approx.
58 HRC. Leather sheath with belt loop.
Max. branch diameter &@
Overall length
Weight "
No. 707480
2' 71.50
302
H ARNO]`;Z3\
~`|Z;\`=;\;`#\{;{
This shapely pair of shears is perfect
for small tasks and small hands. Its
lightweight and comfortable leather-lined
handles keep your hands from tiring even
after long hours of use. Drop-forged, selectively hardened stainless-steel blades
with a naturally forged surface texture
(not polish ground). Leather sheath with
belt loop and snap closure.
Garden Tools
Lwe Pruners
&"^
<
and now, all the firms pruners are 100% made in Germany. The specially developed blade steel guarantees
the necessary hardness with maximum toughness, making the blades virtually unbreakable, even at temperatures below freezing. All parts are available separately and can be easily replaced if necessary.
A [; 1 ORGINAL
\~`;`
The principle of the anvil pruner,
whereby a cutting blade closes against
a flat surface (anvil), allows better force
transmission, making them effortless
to work with. This sturdy model is the
tried-and-tested orginal from Lwe with
plastic-coated handles and a robust
blade-stopping mechanism.
Max. branch diameter
Overall length
Weight "
No. 718251
&^ 29.90
B [;'\~`;`=
[`;{<\{;
The Lwe 8 combines the advantages of
an anvil pruner with those of a bypass
pruner. A curved blade holds the material
to be cut perfectly in the jaws, while the
anvil principle allows a strong cutting
force. The distance between the handles
can be adjusted via a setscrew to suit
both large and small hands. Occasional
adjustment while you work prevents your
hands from tiring and, by shifting the
pressure, increases the service life of the
blade and anvil. This model also features
a slim head shape for constricted spaces,
inwardly curved plastic-coated handles
Types of shears
Pruning shears are basically
divided into two different types:
bypass and anvil shears.Bypass
shears have two cutting blades
that slide past each other. Anvil
shears operate on a different
principle, whereby the cuttingblade comes down on a flat
surface, called the anvil.
Bypass shears
Advantages:
~
=
green wood
B
Drawbacks:
3
>
Anvil shears
for smaller hands, and an externally
affixed blade which is easy to replace.
Max. branch diameter
Overall length &
Weight ^
No. 718253
^^^ 39.90
Advantages:
;
#
mission (less effort
required)
]
wood
Drawbacks:
slightly squashed
during cutting
7
damaged
C <\`;~`|Z;\`Z
Robust lightweight pruning
shears with soft-coated handles
for a non-slip grip. Carbon-steel blades.
Drop-forged aluminium handles and
body.
Max. branch diameter &@
Overall length &
Weight ^
No. 718225
& 53.80
D <\`;~`|Z;\`Z=
[`;|\{;
Light yet robust pruner with soft-coated
handle for a good grip. The revolving
handle design prevents rubbing on the
palm, which avoids blisters and allows
comfortable continuous use. Carbon-steel
blades. Drop-forged aluminium handles
and body.
Max. branch diameter &@
Overall length &
Weight '
No. 718226
'22 57.90
303
Garden Tools
A <\`;3~`;`
Small pruner for light gardening.
Perfect grip also in small hands. Coldforged Japanese sword-steel blades with
hard chrome finish. Pressure injection
die cast body. Patented centre oiler
included.
Max. branch diameter 15 mm
Overall length 175 mm
Weight 170 g
No. 718224
^^_ 40.90
B <\`;`33|Z;\`Z
Fine trimming shears with thin blades
for cutting flowers and for picking fruit.
Cold-forged Japanese sword-steel blades
with hard chrome finish. Pressure injection die cast body. Patented centre oiler
included.
Blade length 2
Overall length
Weight &2
No. 718227
'"& 34.40
D
C
C <\`;`33|Z;\`Z
For picking fruit and flowers or
trimming withered shoots. The slim
blade ensures that the surrounding
parts of the plant do not get caught or
damaged. Forged from carbon steel with
a deep juice groove to guide any sticky
plant juices away from the blade. Handles of light aluminium alloy with nickel
coating. Without oiler and position lock.
Blade length 50 mm
Overall length 190 mm
Weight 110 g
No. 718228
&^'_ 16.50
D Z3\|\`{;|Z;\`Z
;
=
weight shears for harvesting fruit or vegetables and for caring for potted plants.
Blade length ^
Overall length 100 mm
Weight ^
No. 718148
&^ 12.30
Branch Shears
E <\`;[#\{;{
~`|Z;\`Z[;`
Powerful performance:
The jaws of these extra light loppers are
drop forged and therefore have a very
fine and uniform metal structure. An
oiler makes it easy to apply oil to the
cutting edges. Together with a special
hardened bolt this cutting mechanism is
almost indestructible and cuts branches
^ les which are torsion-resistant through an
oval shaped chamber system, are made
304
F ;;Z~`\;~~;`
With its ratchet mechanism, this
lopper allows you to cut branches of
up to 45 mm with only a third of the
strength you normally require. With each
cut (5 ratchets), the transmission ratio
changes, always ensuring the best possible lever-age from each stroke without
having to reapply the tool. The telescopic
handles can be locked securely in six
Garden Tools
A [;\~~;`
[`;{<\{;
Light weight but maximum strength! The
robust blade on the slim head is Tefloncoated to minimise friction and prevent
the cut material from sticking to the
blades. A curved blade holds the material
to be cut optimally between the blades,
while the anvil mechanism allows strong
cutting forces. Thanks to the loppers
overall length of 800 mm, the ergonomic
plastic handles affixed to stable handle
tubes ensure ideal leverage for branches
with a diameter of up to 40 mm.
Max. branch diameter 40 mm
Overall length 800 mm
Weight 1180 g
No. 718254
2 72.00
B \~\;Z;<`\\{
`Z;\`Z
Hitachi steel for cutting branches
$ %
white oak handles.
Max. branch diameter
Overall length 2
Weight 950 g
No. 707479
&"^ 61.80
C NISHIGAKI ;;Z~|Z;\`Z
Combined telescoping saw and shears
for pruning and harvesting fruit trees.
Z?7
^
m. Anodised aluminium telescoping rod,
high-strength carbon-steel blades.
Max. branch diameter 15 mm
Overall length &'@^
Weight &^
No. 712705
'_^" 104.00
Repl. Blade No. 712706 &_' 20.80
Key to Pictograms:
Anvil shears
;
=
for cutting dead wood.
Hedge Shears
Bypass shears
Precise, clean cuts, ideal
for cutting green wood.
D <\`;;{|;Z;\`Z
Robust hedge shears with forged,
slightly angled aluminium handles for topiary work and trimming hedge bushes or
boxwood. The replaceable blades made
of premium carbon steel are hard-chromed for rust protection. An oiler system
allows oil to be applied directly to the
blades using an oil can. Shock-absorbing
rubber pads. Non-slip grips.
Blade length ^
Overall length 700 mm
Weight "^
No. 718256
48.20
305
Garden Tools
A <\`;;{|;\{
<Z`33;`
This monster among hedge shears will
impress you above all with its 4 mm thick
forged blades and its robust design with
angled handles. It allows you to shape
even overgrown hedges effortlessly. An
elaborate cushioning system minimises
shock during cutting, while an oiler
allows oil to be applied easily to the blades. In addition to a forged sap groove,
the end of the blade is serrated to keep
even the smallest branches in the shears.
Blades and cushions can be replaced and
are available as spare parts.
Blade length ^
Overall length 770 mm
Weight &
No. 718257
59.50
B
C
B ;{|;Z;\`Z
[<`\;`
You surely know the following situation:
When trimming hedges, a thick branch
may stop and force you to use a saw.
This change of tools is a thing of the past
with our new Japanese hedge shears.
A recess in the back part of the blade
fits branches up to 15 mm thickness
C \~\;Z;<[{Z;\`Z
Particularly light and elegant
shears for trimming boxwood hedges
and ornamental pruning. The blades are
polished and exposed at the rear, which
reduces friction and increases cutting
power. The cutting action can be adjus-
D
D \{#]`|;{;{|;
\{<[{Z;\`Z
With their short handles, these handforged shears are ideal for topiary cutting. The two-layer blade of high-purity
carbon-steel has an excellent edge life
and is extremely sharp. The hollowground polished blades minimise friction
for improved cutting performance. Castle
nut for easy adjustment. Japanese white
oak handles.
306
1 Long Blade
Forged from Blue Paper Steel primarily
for long straight cuts.
Blade length '
Overall length 2^
Weight 880 g
No. 718260
&&&' 179.90
2 Short Blade
Forged from White Paper Steel for round
topiary cuts.
Blade length 190 mm
Overall length 545 mm
Weight '
No. 718261
_ 89.90
1
E ;\;`\Z;]`;{|;Z;\`Z
Saddler quality. Fits No. 718171
_&'2&
No. 718160
&" 22.90
Key to Pictograms:
Bypass shears
Precise, clean cuts, ideal
for cutting green wood.
Garden Tools
C \#~`~Z;ZZZ`Z
[`\{\;Z;
{;`\
Traditional universal Chinese scissors of
stainless steel with beautifully decorated
handles. The brass screw allows you to
adjust the smoothness and disassemble
the scissors for sharpening.
Blade length ^
Weight 45 g
Overall length
1 155 mm No. 708212
2 & No. 708213
B Z3\<Z\Z;\`Z
Miniature gardening shears for
precise pruning of house plants.
Overall length &
Blade length 40 mm
Weight 70 g
No. 718112
"_ 30.90
"&2 10.90
_' 8.90
\#~`~Z;ZZZ`Z[
`\{\;Z;{;`\,
Z\#;| Price advantage
No. 708214
& 16.90
E \;<`\;`Z
Pliers for pruning branches and buds
cleanly. With angled cutting edge for
flush cuts right at the trunk.
Overall length
Blade length
Weight 185 g
No. 717916
^2 43.50
D <Z\Z='#~;;Z;
Professional Japanese tools for any work
required for growing and caring for bonsai trees. Includes budding and pruning
F
F {`|\`{;|Z;=
^#~;;Z;
Trowel, pick and rake.
Chrome-plated steel.
Overall length &@2
No. 717915
&^ 14.70
Sickles
Japanese Sickles
These hand-forged sickles are feather-light and extremly sharp, making
gardening work much easier. Their handles consists of water-resistant
Japanese hardwoods like ho or white oak.
G Z;[]`;#\`{;;{
\{;
Hand-forged:
Archaic-looking sickle with double-layer
forged blade for cutting small branches,
grass or picking lettuce. The chestnut
handle is fire-hardened over an open
flame to make it more resistant to mechanical stress and dirt.
Blade length 100 mm
Overall length '
Weight 100 g
No. 718054
'_ 58.00
H {\3\ZZ#Z;;Z;
Hand-forged:
The powerful blade of this multi-layer
Damascus steel sickle cuts through even
the strongest grasses, weeds and undergrowth effortlessly. Harvesting salad and
vegetables with it is a pleasure.
Blade length 155 mm
Overall length 400 mm
Weight ^2
No. 718161
'^" 99.90
I ]\`3|Z;
Sickle with thick blade. Cuts branches,
undergrowth and brush. 4 mm thick
three-layer steel blade.
Blade length 180 mm
Overall length ^
Weight 2
No. 718152
^2 41.20
307
Garden Tools
B
A |`\ZZZ;
Ultralight:
Sickle for fine grasses and delicate
herbs. Thin two-layer blade.
Blade length 180 mm
Overall length ^'
Weight &
No. 718119
'^ 33.70
B \`;Z|Z;Z
Compact sickle with toothed blade, ideal
for harvesting salad, vegetables and
herbs.
Blade length 170 mmm
Overall length ^
Weight 100 g
No. 718150
'^ 9.90
C
D
C |`\ZZZ;=`\;{
Strong sickle for tough grass, herbs and
undergrowth.
Blade length 195 mm
Overall length 2
Weight
No. 718151
2'& 31.90
D {`~#~]\`3|Z;
With three-layer, robust head for removing brush and clearing undergrowth.
Blade length 170 mm
Overall length 500 mm
Weight ^
No. 718156
^'_ 45.90
E Z;;
Short, L-shaped hoe for weeding and loosening soil. Cranked blade hand-forged
from double-layered steel.
Blade length &
Overall length ^_
Weight 190 g
No. 717907
&2_ 19.90
F
Z;;\;`
This tool is designed for
clearing undergrowth and containing rank
growth. Due to its long cutting edge, you
branch diameter from a safe distance.
The hand-made, untreated ashwood
handle with its rounded end allows the
tool to be held firmly and safely without
\
?@2`
Head weight 750 g
F
Blade length ^
Overall length 910 mm
No. 708360
'^&" 99.00
G [;;`|Z;\`|\;
With its solid design, this Swedish clearing axe is ideal for thinning out brush.
The sharp yet robust blade made of
Swedish steel can be turned over if worn
and, if necessary, can also be replaced.
An axe handle of fine-grained hickory
completes this thinning tool.
G
H Z\<\;`]`;3\;;
This machete is used by the French
Foreign Legion for decades. However, the
extra-long sturdy carbon-steel blade is
not only suitable for survival training in
tropical rainforests. This machete is an
ideal tool for forestry, gardening, hunting
or fishing. It is easy to sharpen and retains its edge even after heavy-duty work.
Thick leather case with belt loop.
Blade length 550 mm
Overall length 710 mm
Weight 1000 g
No. 705666
"' 114.00
308
Garden Tools
Schrckenfux-Scythes
Blade length
_
^_^
__"
^""
88.60
44.30
89.00
47.50
B Z`;]
<`ZZ;
Ideal for controlled mowing of weeds and
undergrowth along hedges or on fruit tree
meadows. The blade is shorter and thicker than grass blades, and is not easily
damaged when it hits a foreign body.
The snath can be adjusted for height
$&_@&'%7
Whetted and sharpened ready for mowing, with instructions.
Blade length 500 mm
Blade width 2
No. 705607
_^' 87.20
Repl: Blade No. 705608 ^2'" 43.90
C [{;Z;Z\
Optimal body positioning for mowing via
adjustable handles and S-shape. Fits
Schrckenfux and all standard scythe
7Z
2?^
Learn to mow with a scythe and how to peen the blade in our Scythe workshop,
see www.more-than-tools.de/workshops
D ~;;|\33;`
Hammer with die forged head and pol
;
nomically shaped shaft made of copper
beech secured with an annular wedge.
Overall length
Head weight 2
No. 714115
&" 22.90
E
E ~;;|\
Die forged steel anvil with a polished
face for peening scythes and a horn for
fastening on wooden blocks. The scythe
blade is laid on the anvil, the cutting
edge is peened with the hammer. For detailed instructions on peening scythes,
we recommend the DVD Scything
>$ _&^_%
Face 40 x 40 mm
Weight 500 g
No. 705664
^^2 27.80
F
F ~;;||
For controlled peening of scythe and
sickle blades. Round anvil with stop,
centring pin for holding in a wooden
block. Two striking sleeves for coarse and
fine peening.
Weight 800 g
No. 705591
'_ 53.40
G ~;;|\=[Z~~;`
Peening made easy:
Peening makes the cutting edge of
scythe and sickle blades thinner, harder
and easier to sharpen. But peening is
quite a challenge. A well balanced blow
with the hammer, an even feed motion
and a precise positioning of the blade
on the anvil are required. All demand a
lot of practise. This new peening anvil
solves this problem. The blade is placed
on an adjustable support plate. A depth
stop makes sure that the blade is exactly
positioned on the domed anvil. Another
advantage: you can always easily view
the field of work. The anvil is made of
impact-resistant steel, the surface area
^ 2
HRC. Because the anvil is not hardened
through the hammer will not bounce.
We recommend a square hammer with a
slight crown and a head weight of approx.
2@'= _&&Z
for all scythe and sickle blades. The anvil
has a horn for beating it to a wooden
block. Includes instruction sheet and
abrasive web for cleaning blade, anvil
and hammer. Galvanized.
Weight 800 g
No. 705587
2" 74.90
309
Garden Tools
A [;Z;
Natural sandstone, perfectly shaped for
honing scythe and sickle blades.
;
Dimensions &?^?&2
No. 705582
"&2 10.90
C
C [;Z;{;`=[`
This traditional-style whetstone holder
is made of natural, polished Austrian
cowhorn. Offers an even classier way of
B [;Z;{;`=~~;`
Fill the container with water and wear
it on your belt! The perfect device for
keeping your whetstone wet and handy
D Z|;;Z=3[|=
Z\`~;|\{~;;|
=#
;
Schoiswohl and Canadian organic farmer
Peter Vido, teach knowledge which has
virtually been forgotten. From adjusting
the snath, body position when mowing,
to peening and honing the blade, viewers
will learn everything they need to know
about working with scythes.
{{==;
No. 713752
_' 8.90
Watering Cans
E {`[\;`|\=
The perfect design of this elegant copper
watering can makes day-to-day plant care
a pleasure, and transforms this everyday
object into an unusual ornament. The
surface is patinised and coated.
Overall length ^_
Capacity 0.45 l
No. 718918
64.90
F LONG-SPOUT
[\;`|\=
The slim, extra-long spout of this
masterfully manufactured, hand-soldered
water-ing can makes watering potted
plants and bonsai trees accurately real
easy. A sieve in the filling opening prevents the ultrafine pouring nozzles from
becoming blocked. Brass container with
removable sprinkler head.
Overall length 800 mm
Capacity 4 l
No. 718921
&^^2 123.00
H HAWS~`];ZZ\|#`;\
[\;`|\$|`;;%=`;Z
Professional watering can whose long
spout allows targeted watering even in
large beds. The fine, all-brass rose is normally used facing upwards to spray the
water as gently as rain onto seedlings
I
G ;`\|;[\;`|\
The watering can classic, which holds as
much as 8.8 litres, embodies traditional
;
to the body. The steeper slant to the rose
makes it the ideal can for general watering purposes including seedlings. When
not in use, the brass rose can be secured
in a parking point without dripping. The
two hardwood handles provide a comfortable grip, while the domed lid prevents
spillage when watering. Galvanised and
with a powder paint coating, the watering
cans are permanently resistant to rust.
310
I |]Z;}{`[\;`|\
\{Z~`\<;
This set will take care of all your watering
needs. The small indoor watering can
with a fine brass rose to allow precise
dosage is not just practical - its decorative too. With a 1 litre capacity, its light
enough to carry but holds enough for
plenty of watering without refilling. And
to make sure delicate plants like orchids
get just the right amount of care, the set
#^
Garden Tools
Gardening Sets
A \~\;Z;|\`{;|Z;=_#~;;Z
For Professionals:
Professional set of Japanese quality tools
for pruning and planting. It includes the
$ _&'&2"%
cutting without damaging the plant, a
Silky Pocket Boy 170 mm folding saw
$ _&__2%=
=
rooting and transplanting knife
(No. 718157), a flower and allround
shears (No. 718099), the sickle knife
for harvesting and cutting weeds (No.
718158) and the Japanese garden knife
$ _"&2"%=
gardening apron made of split leather
(No. 707501).
No. 718916
&^&"^ 157.00
Price advantage!
Price advantage!
B
B \~\;Z;|\`{;|Z;=#~;;Z
Good start:
With this professional set of Japanese gardening tools, you are optimally
equipped for pruning and other work
with plants. It contains a DICK classic
$ _&&&2%7wood sheath for trimming fruit trees and
=$%
$ _&'&2"%=
$ _"&2"%=
sheathed planting knife (No. 718157)
for replanting potted and outdoor plants.
Practical storage and transport with the
tool roll (No. 707514) made of strong
cotton cloth with clip fastener.
No. 712633
_&' 85.50
C |\`{;|\~`
The stylish way to always have all
important tools ready at hand: practical
hip apron made of thick cotton with fine
=2
Dimensions ^?2
No. 707501
48.20
D
COTTON APRON
The hefty cotton fabric is seamed on all
sides, and impregnated to repel water
and dirt. The large, sealable front pocket
is perfect for tools and materials while
the small pouch serves to keep your
glasses.
Colour green
Size
2?'
No. 707505
90 x 87 cm
No. 707506
E ;3~Z`|
The plant friendly,
black hemp string
is traditionally
used in Japan for
tying bamboo
fences and trellises when shaping
bushes and
trees. It is highly
tearresistant, nonelastic and easy
to knot.
Overall length
^
No. 708891
&^' 15.80
^&& 36.90
^2^" 43.30
Order hotline:~ }"#$%""&#"&"#"
"#$%&'#"&"#"/
##
311
Garden Tools
A \~\;Z;`<<;`<Z
Cult object:
Japanese boots with separate big toe
provide a better footing, improve the
wearers sense of balance and circulation. Insiders have long considered these
traditional boots to contribute significantly to the extraordinary long lifespan of
the Japanese. To us, these eye-catchers
have all the makings of a cult object. For
mowing, in the garden, for pond maintenance or just to show off. A small nipple
on the heel makes the boots easy to take
off. Ribbed cotton cuff. Natural rubber,
nylon inside. Wear these boots with 5-toe
__22_
B #;ZZ=~\`Z
Seamless knitted socks with separate
toes, in keeping with Japanese tradition.
They allow better airing, and so help prevent sweating and athletes foot. Blended
fabric of 85% cotton and 15% nylon.
One size, black.
No. 707667
& 11.90
Size
^'@^"
40
&@
^
No. 707662
No. 707663
No. 707664
No. 707665
^_&
^_&
^_&
^_&
41.30
41.30
41.30
41.30
D
C \~\;Z;|\`{;||;Z
These thin, cosy gardening gloves made
of finely perforated pigskin facilitate
precise control of tools and plants. Inner
lined with full-grain leather for better
grip, Velcro fastener on cuff.
Z3_='="#&
D ;`Z;Z
These overshoes keep your shoes clean
in almost any type of weather. Unlike
conventional rubber boots, the special
water- and dirt-repellent textile fibre
prevents even wet soil and mud from
sticking to the shoes. After use you can
clean them under running water or in the
washing machine. Quick to pull on or off
with an adjustable elastic band. Sizes are
already adjusted to fit over the specified
shoe sizes.
Size
M
L
No. 707655
No. 707656
No. 707657
'22 10.30
'22 10.30
'22 10.30
Size
^2#^"
#
^#
45-47
No. 707696
No. 707697
No. 707698
No. 707699
&2_
&2_
&2_
&2_
19.90
19.90
19.90
19.90
E
F
F \~\;Z;|\`{;;`Z\
This classically designed hat is not only
essential to rice farmers and Japanese
gardeners - it is suitable for other outdoor
activities as well - from fishing to sunbathing. The fine bamboo weave and reed
covering allows the hat to keep you cool,
&2
barely noticeable even on long days.
Weight &2
No. 708894
&' 21.90
G
H
E [{#3;Z;
This miniature of a Buddhist bell house adds a touch
of Asian atmosphere to your garden. Cast-iron pagoda
and miniature bell, surface black annealed for rustproofing.
Dimensions &'?&'?&^
Weight 1700 g
No. 820034
&"^ 49.90
312
G [{<;Z=|`;;
Cast iron bell whose tender tones play
the song of the wind. Surface ornamented in the style of a Buddhist temple bell
and with patina.
Weight 185 g
1 50 mm
No. 820032
2 2
No. 820033
_&
8.50
'^
9.90
H \~\;Z;Z`<<`Z;Z
\3;\[\Z
These brushes made of palm fibers are
ideal for cleaning garden tools or wooden
objects as well as cutting boards. They
can be used wet or dry are hard-wearing
and long lasting. Hanging the brushes
with the attached loop extends their life
span.
Overall length 100 mm
No. 716111
2.90
313
Wooden Objects
Urushi
Japanese Urushi embodies the art of varnishing in its highest form. It is made from the natural resin of the
Asian tea tree (rhus vernicifera) and has been used in Japan to protect and lend a beautiful gloss to furniture,
7 =7 ?=
2=
A Z;]`Z<[Z=
Z;Z\Z\<
This bowl set is traditionally used as a
set of tea bowls by Japanese couples.
Both bowls are first coated using the Suri
Urushi technique so that the wood grain
remains visible on the inside of the bowl
and in those spots of the outside that are
not color-treated later. Then the outside
is primed in the Roiro technique with one
of the basic colors (vermillion or black)
and later the final coat is added in the
respective other color. After polishing,
the final coat is removed, bringing out
Characteristics:
Urushi is waterproof, food-safe and resistant to
alcohol and solvents. The coating does not become
brittle or crack with age, and develops a beautiful
; >
7 ^<
=
the surface is virtually intact.
C `ZZ;]<[\{Z~
Spoon and bowl in attractive matching
colours. The red-black colouring is obtained by coating the red-pigment Urushi
layer with black varnish, which is then
slightly sanded off again in some areas.
The resulting random pattern makes each
object unique. The grip of the spoons
Shaker Box
Lovingly crafted box made from
cherry wood to a traditional design.
The oval box is probably the best
example of the simple aesthetic
of the Shakers. Theres nothing
decorative about this box per se,
and yet the carved fingers fixed
with Shaker nails lend an elegant
appearance in their own way.
Combining beauty with usefulness,
the Shakers used these boxes in
different sizes in both the home
and the workshop for everything
except liquids.
D Z\;`<
Dimensions 150 x 100 x 57 mm
No. 820354
'
314
9.80
Z\;`<Z;
A \~\;Z;~;<
HIMITSU BAKO, 5-SUN*
Himitsu Bako boxes are certainly
among the most intriguing hand-crafted
wooden objects made in Japan. At first
glance, they appear to be nothing more
than simple boxes with intricately inlaid
surfaces. Try to open them and you will
quickly discover that their intricacy is
more than just cosmetic. The panels
must be manipulated in a pre-set series
of steps to release the locking mechanisms hidden by the mosaic and allow
the lid to slide open. The production
of these highly precise mechanisms is
a challenge which requires decades of
experience - the youngest master Himitsu
2
3
solid cedar inlaid with different types of
natural wood. Solution included.
C `<;
This handmade trick
cube from
Japan can be
opened with
its hidden slider and filled.
Its inconspicuous corner panels of wenge and maple
are a perfect fit, keeping the design a
well-guarded secret. Making such precise
guides and joints by hand requires decades of experience.
Solution provided.
Dimensions 2?2
No. 820187
^'_ 45.90
B PYRAMID
Contrary to expectation, this pyramid
does not consist of individual bars. All
=
@
enough to get puzzlers racking their
brains! To minimise support flats and
increase complexity, a fixed diagonal
D ;`|~;Z\;
Rolled up, this two-coloured snake cube
of small maple and amaranth blocks
doesnt seem particularly impressive. But
as soon as its let loose, the snake will
have even brainteaser experts scratching
E ;`|~;\3
\;
The shape of this object made of padoukwood balls and maple sticks reminds you
of an atom lattice, also because of its
highly complex structure. The challenge
315
B
A ;`|~;<\
This ball is extremely robust when
assembled and consists of numerous
little diamond-shaped blocks of maple
and padouk. These geometric parts are
connected using short padouk dowels,
with four dowels securing each block.
The ideal puzzle for passing the time
until the next football World Cup.
Dimensions &?&?&
No. 820230
&'_ 22.30
C {;~;`
Dice poker is a game of dice inspired
by the card game. The idea is to get
specific combinations (Full House, High
Straight...) with the dice. In the simple
version of the game, the five boxwood
dice are thrown by hand or from a dice
cup, and after three throws the combinations are compared with those of the
opponent. Another interesting way to play
the game is to include rounds of betting,
as with conventional card poker.
D ]];$\;;%
Is there anyone who hasnt heard of this
popular dice game for the whole family?
The five dices are stored securely in the
handy container. Includes instructions.
Dimensions ^?&&
No. 820228
&&2' 13.90
Instructions included.
Dimensions ^?&&
No. 820227
&&2' 13.90
Solar Kits
A small manufacturer in France produces these solar-powered wooden models which are amazingly close to the
originals. The pre-cut parts and mechanics are easily assembled and can be connected to the supplied solar
cell. The model starts to work as soon as the solar cell is placed under a direct source of light.
E Z\`|Z;
The solar cell of the lighthouse absorbs
the daylight and, when its dark, shines a
light through the lighthouse windows by
way of a light diode and conical mirror.
Thanks to its smooth outside, you can
paint the model in traditional lighthouse
colours to make it even more realistic.
Dimensions &&?&?'
No. 820182
&^ 29.90
F SOLAR WINDMILL
Highly detailed solar windmill which
simulates the wind load through a gearwheel mechanism.
Dimensions &?'?
No. 820183
&^ 29.90
316
B 3Z\~;
Colourful mosaic puzzle with intricately
shaped parts - not for the impatient!
The eight overlapping supports feature
blocks of wood in different positions
which, once assembled, form a grid.
The finished mosaic of beautiful woods
such as maple, padouk and purpleheart
makes a decorative ornament for a desk
or perhaps a coaster for a teapot.
Dimensions &^?&^?
No. 820189
& 17.90
Bamboo Products
Bamboo at its finest:
Bamboo is an ecologically valuable material that regrows quickly. To process it, it is stored in water for months,
split and then pressed into its future shape. Our bowls are made completely by hand in family-run Vietnamese
craft villages. Combined with organic shapes and a variety of expressive colours, the result is a harmonious
interplay of look and feel. The lacquers and paints used are food-safe.
A <\3<<[=[{=`;{
Decorative object in modern-Asian design
with practical lid.
The inside of the bowl has a natural bamboo look and offers plenty of space for all
kinds of household utensils.
Dimensions ^?&^
No. 820361
&"^ 49.90
B <\3<<[=Z\[=|`;;
The outside of this bowl is painted green,
which makes an attractive contrast to
the natural bamboo colour on the inside.
Because of its size, it is ideal for use as a
fruit or salad bowl.
Dimensions ^?"
No. 820360
" 24.90
1
C <\3<<[Z;
Sets of bowls in harmonising colours for
cereal, finger food or simply as decorative objects.
D COCONUT BOWL
Broken eggshells and composition gold
foils give these versatile coconut bowls
an extravagant look. The bowls are
completely hand-made in small craft
businesses in Vietnam. The applied clear
lacquer is food-safe.
317
A ;Z
A unique piece from our master workshop:
It can be used as chair or table, or other
way up, for storing firewood or magazines. Unobtrusive elegance and perfect
form characterise our LeiHo stool.
This versatile piece of furniture is crafted
Horn Products
For centuries hornware has proven itself in daily use. This natural material does not only offer a distinctive
appearance but also a variety of positive features. Genuine horn products are safe to use, food safe, free from
toxins and tasteless as well as acid-proof and color-fast. These features make horn products the ideal kitchen
tool and accessory. Like every other natural material, horn is not homogeneous in colour and shape. Therefore
each single horn product is unique due to its finish and material!
C
B
B Z;`=`=Z3\
Massive, stable but thus elegant
shoehorn in a subtly wavy form. Function, material and paint structure of the
horn form a perfect impression.
D {;`\;<[]`]`Z=
HORN
A bowl versatile and impressive as
nature itself.
318
C <`\;;3
|
> ;
segment is different on each bracelet.
The lunated horn segments are connected with a sturdy and elastic thread.
Inner diameter 50 mm, Width 40 mm
No. 820163
&2_ 19.90
Bark Products
Cork
Cork is known mainly as a material for pin boards or corks for wine
bottles. However, thanks to its special properties such as elasticity,
wear-resistance and light weight, cork can also be used for more
unusual products. The raw material comes mainly from Portugal,
where bark is peeled off cork oaks every 10 years or so. The
\
perforations, the cork bark is applied to a backing film to
make it suitable for outdoor use as well.
A
A BACKPACK
An unusual backpack which not only
looks good but is practical too. The
lining has an extra zip compartment for
tucking away smaller items securely. Two
adjustable cowhide shoulder straps make
it extremely comfortable to wear. Reinforced bottom for greater stability. Can
be closed with a cord drawstring, Velcro
fasteners and a metal buckle.
2
Dimensions ^??&
No. 820380
2_& 79.90
B ;<
A practical and robust companion! Spiral
notebook with cork cover and 75 blank
pages.
Model
148 x 105 mm
No. 820381
?&'
No. 820382
^^
4.20
2
6.50
Birch Bark
Birch bark is breathable, retains aromas and protects its contents from mould by way of essential oils. The raw
material retains its shape and elasticity for decades. The bark is taken from Siberian birches which are felled
for making furniture. The actual material used for the boxes is the inner layer of the bark, which is peeled off
the outer layer after the bark has been stored in water. To produce thicker materials, several layers are joined
together.
C Z`\|;\;`=<`<\`
[<`\{;{~\;`
Large storage container with intricate
braided pattern (outside only) for dry
foods such as coffee, pasta or rice.
Dimensions &&?
No. 820391
&^ 29.90
D Z`\|;\;`Z;=<`
<\`=^~;;Z
This set is charming in its clear and
simple design. Because of the different
sizes, it is ideal for keeping spices, tea
or cereal.
Dimensions &?&=
105 x 150 mm,
85 x 95 mm
No. 820390
^ 59.90
Leather Products
F
E ~=`;{;;`;\;`
For small or delicate objects such as
jewellery, coins, watches. In Sweden
they are also used for storing spices and
coffee.
Dimensions 150 x 70 mm
No. 820101
22 31.70
Dimensions &?&
No. 820103
48.20
319
A
B
A \{;Z~`Z;=`\;\;`
From the depths of the ocean directly to
the runway of the fashion capitals: this
B 3;Z[\;=Z|`\
The linear structure of the stingray makes
#
pockets for notes, a coin compartment
C {;#\#{`\[Z`|
POUCH
Blue drawstring pouch with dragonfly pattern for keeping trinkets in.
Lined with black silk.
Dimensions &?&&
No. 820007
&"^ 49.90
patterns are silkscreened onto
the leather by hand using the
traditional Urushi lacquer
made from natural tree resin.
This technique is inspired by
Indian Sarasa cotton prints,
so-called chintzes. These were
already produced in India well
7
&2
7;
nobility for their extraordinary
motifs and colours.
D {;#\3;Z[\;
This fashionable mens wallet with interlaced black and ochre decoration combines practicality with an elegant design.
=
E
F
E {;#\~#~~`Z;
Practical purse which can be used to
hold money as well as jewellery, make-up
or any other small but important items
for everyday use. With small outside
compartment.
Dimensions &&?2?&
No. 820244
&2_ 19.90
320
F {;#\Z3\~#~\Z;
This small case is ideal for business
cards, credit-card sized cards and as an
extra purse.
Dimensions &?2?_
No. 820245
& 16.90
For a product video showing the Inden-Ya technique see our webshop
at www. more-than-tools.de
Tools | 325
Woodturning | 326
Finishing | 326
Sharpening | 327
DVDs | 330
321
Books
The more intensively one studies a particular subject, the more fascinating it becomes. Books are
indispensable companions on the way to learning and new discovery, as are DVDs and workshops.
The books we offer mainly address the tools, techniques and traditions of working wood by hand
and metal-work. The selection process we use is simple - all the books we offer have been read by
our own experts and selected for the quality of their content.
Price note
As the German books are subject to the store price
agreement, we are obliged to pass on any price
changes to our customers.
Wood Indentification,
Storing, Sawmilling
\\Z{;`\`;
Adrian Walker:
Atlas of wood types. 150 types of
wood in words and pictures. This
comprehensive atlas of wood introduces 150 types of wood and provides
instruction on their uses. Clear tables
in several languages scientifically do ;
growth, appearance, properties, and
utility are extensively documented.
&"~=
=_2
=
&
=?"=in German.
No. 713782
^_"
39.90
3;`3\;
Christoph Richter:
This book teaches you
how to tell the inner
composition of trees
from their external form
and identify the causes
of specific characteristics of wood - essential
knowledge for foresters, wood engineers and wood buyers. But it will also help the wookworking professions
such as turners and cabinetmakers to select the right
wood and find unusual grains. The book explains wood
characteristics, imperfections and shake by comparing
photos, and discusses how they arise and how to avoid
them. The photos show, for example, the bark structure
or shape of the tree and the grains or imperfections that
might occur inside the cut product.
^~=
=
=^?&=in German.
No. 713453
^_"
39.90
;`;;{<;;
Terry Porter:
A practical reference book. A total of
7
detail with their typical properties,
growth shapes, weights and health
risks. Both the Latin names and a table of German names and synonyms
guarantee that you have an overview.
2~=
=^
=&?_=
in German.
No. 713161
^"
]`;`#;;3Z;\`;
33\`\]\3;
Jean-Denis Godet:
This practical guide to wood for foresters, gardeners and hobby joiners
^
domestic types of wood. Detailed
photographs of flowers, leaves, fruit
and buds make it easy to identify
the trees. Lists the density and uses
of the individual types of wood.
&'~=~
7=
=&?"_=
in German.
No. 713169
&'2
322
`;{\|;`
Alan Holtham:
A comprehensive book for all
crafts that involve seasoning
wood. Author Alan Holtham,
who studied forestry and wood
science, gives an insight into
the correct storage and drying
of wood. The book describes
industrial kiln drying as well
as the correct stacking and
storage for air drying. In other
chapters, the author describes
how to select the correct type
of wood for a project, mistakes made in drying, and the use of recycled timber.
&"~=
=
=
?2=in German.
No. 713622
^_"
39.90
Z;3{;`=
`;\{;]\
]
; }
Children enjoy carving figures,
toys, and many other objects
from wood. The experienced
educationalist and game designer inspires with examples and
ideas. He provides valuable tips
and tricks for turning branches
into walking canes, buttons,
swords, flutes, charming little figures, toys, or even
games with just the knife and a few carving strokes.
2~=
=
=
^2?&=in German.
No. 713928
&_"
16.90
&__2
|`Z;#;{;`;;`
GRUNDKURS
Tove Yde:
Green wood is the ideal
material for teaching
children how to carve
because of its excellent
workability. With the
help of this book, all
aspiring woodworkers will
soon be able to make a
variety of spoons, forks,
combs, games, pipes and
countless other useful objects. The properties of various
;
tools and finishing materials are also discussed.
71 Pages, Hardcover, over 100 coloured photos,
?=in German.
No. 713230
&__2
19.00
19.00
;;<][|
Chris Lubkemann:
The Little Book of Whittling shows
you how to create small works of
art with nothing more than a pocket
knife and a twig. This is not only fun
for children but also a welcome way
of unwinding for adults. In this book,
Chris Lubkemann presents simple
ideas step by step that will inspire
children and adults alike.
97 Pages, Paperback, colour
7 =&?^
No. 713912
"
9.90
Z;;`;]`{Z
` 7;
}
Carving is a fascinating handicraft. It
trains the fine motor skills, concentration and the consciousness of form.
After a brief description of tools and
a basic introduction to wood carving,
each chapter is devoted to one age
group respectively. Step-by-step
illustrations provide motivation and
precise working instructions at the
same time. This simple introduction
to carving makes the reader want more!
"2~=
=^
=
&_?=in German.
No. 713852
2
22.00
|`{`ZZ;
Dick Onians:
This in-depth technical book guides
ambitious carvers from simple relief
work to complex sculpted figures.
The author pays particular attention
to designs suitable for the workpiece
and the anatomy of humans and
animals.
&'^~=
=_
2
=
&_?'=in German.
No. 713358
_"
29.90
42.00
19.90
Z;
Jeremy Williams:
A systematic introduction to wood
and tools, and the various carving
techniques makes getting started in
carving easier. Valuable tips prevent
beginners mistakes; step-by-step
instructions guide you to a mastery
of low and high relief carving and
sculpture.
&'~=~
7=
^2
=
&_?=in German.
No. 713287
&22
17.80
Z~`;\Z
Josepmaria Teixid Cam and
Jacinto Chicarro Santamera:
An introduction to the art and technique of sculpture
in wood. This fundamental book
offers an in-depth introduction to
the art of sculpture and sculpting
techniques. Wooden sculptures from
different periods and cultures are
introduced, as is the material wood.
The creation of a range of sculptures
is documented, through the design,
planning and implementation
stages. &"~=
=
=^?^=
in German.
No. 713825
^_"
39.90
Books
;]\Z;<ZZ;
]];=Z\;=33;
Bernard Bertrand:
^#7#
#
tions, this book will teach you the
ancient technique of carving wood
and making simple workpieces by
yourself. An abundance of pictures
shows the making of various wooden
objects, such as ladles, salad
servers, fruit bowls, and napkin holders. Why not add an individual touch to your clothes
by using self-carved buttons?
Beside explaining how to make them, and giving many
other useful tips on the tools you need and how to
handle them, the author also points out wood types
that are suited for carving.
&^~=
=
='2?=in German.
No. 713930
&'2
19.90
MAKING SHOJI
Toshio Odate:
Masterpieces of Japanese Craft Culture. In
this book, Toshio Odate
explains how to make a
Japanese sliding door,
from layout to gluing
on the paper. Having
been trained himself as
a tategushi or slidingdoor maker, in Japan,
he gives insight into
this traditional craft
with great expertise and
explains the process
comprehensibly.
&~=~
7=&_7
&
=&?'
No. 713470
&"^
20.90
Furniture Making,
Woodworking
;`<{|;
Terrie Noll:
Holzverbindungen (The Joint
Book) provides clearly described, easy-to-follow step-by-step
instructions for making all kinds
of basic wood joints and their
variations. The well-explained
overview is complemented by useful information on the required
materials and interesting aspects
of furniture design.
144 Pages, Hardcover, 700 coloured images and
="?2=in German.
No. 713189
_"
29.90
Z\33\]=3<;\Z
Sam Maloof:
This book by masterful furniture
maker Sam Maloof is just as ingenious as his wonderful furniture. He
teaches readers his secure sense of
shape and his profound love of working with wood with typical ease and
clarity. Like a good friend, he allows
the reader intensive and intimate
insight into his creations, work and life. Workshop photographs become real works of art, casual handwritten
notes become calligraphic treasures and even the smallest sketches radiate liveliness and joy. An eye-opener
for anyone involved in furniture making.
~=
=_
=
^27
=?^=in German.
No. 713535
_"
29.90
{;`3<;<\
Fritz Spannagel:
First published in 1954, this classic
remains just as topical today. Its
importance is derived from the
systematic instructions, descriptive
illustrations and detailed descriptions
of the joints and other techniques
of woodworking craft. The book is
largely intended for apprentice and
qualified joiners, but also for architects and woodworking teachers.
^2'~=
=&^'
=
?"_=in German.
No. 713543
^
34.80
`\|;<3<;3;`
A.W.P. Kettless:
80 woodworking projects with a
range of difficulties are presented
clearly in drawings, material lists
and step-by-step instructions. Build
shelves, tool boxes, tables and
chairs, garden furniture, garden
gates, sheds, chests of drawers and
even simple boats.
~=
=
=
&"?=in German.
No. 713858
2"
28.80
Z\{<]`Z`;;`
Carsten Hilbert:
=
=
bonds, help apprentice carpenters,
qualified carpenters and ambitious
hobby carpenters whenever they have
questions. The comprehensive knowledge of carpentry in user-friendly form,
numerous tables, many tips and tricks
make this book an invaluable
companion. ~=~
7=
&2
useful tables, 110 x 180 mm, in German.
No. 713876
22
28.50
3<;\Z[{
Daniel Mack:
Design, building techniques,
objects. As nature shaped the
wood, wild wood builders use
it in their furniture. Daniel
Macks book is an entertaining
introduction to the subject, from
materials and tools to building
instructions for various projects.
&2~=
=
^
=&?&=in German.
No. 713464
&
25.90
;[`Z~<
Scott Landis:
A Craftsmans Guide to Making
the Most of any Work Space.
If you are planning a workshop,
this book will prove a valuable
source of ideas and advice. Based
included, it shows you how to
make the best use of the space
you have available. The location
of tool, wood and accessory storage areas, power tools,
electrical sockets and dust collectors is all discussed in
great detail.
&2~=~
7=^&
_2
=?'=
No. 713586
&'2
19.90
;3~;;Z`\;{
|{;;`
Gary Rogowski:
All types of wood joints used
in handicrafts are presented in
this reference work. The author
explains their purpose and procedures for making
them using
handheld tools.
Novices and professionals alike
will benefit
from the logical
step-by-step
photographs
and descriptions.
^"~=
=
&_
=?'
No. 713761
_"
29.90
[;`Z\];Z;<;`<\;
Sandor Nagyszalanczy:
Have you ever held a workpiece
in your hands and thought How
on earth am I going to work on
this?. This book by Sandor
Nagyszalanczy, former editor of
Fine Woodworking magazine, provides clear instructions
on how to make templates
and workshop aids which are
essential for efficient and
precise work. Whether sanding
aids, sawing, planing or milling
templates, this book offers solutions for even complex
shapes.
22~=
=
'
=?'=in German.
No. 713508
^_"
39.90
\<;Z
This photo book will inspire any cabinet maker to
=
presents 500 cabinets, each completely different
in form, colour and design. The level of difficulty of
the international pieces ranges from manageable to
impossible and is also ideal as an inspiration for
journeymans pieces.
419 Pages, Paperback, colour illustrations throug =?
No. 713616
&_22
18.90
Z;{Z\;~;`];Z`;`;
{<\;
Doug Stowe:
In this book, Doug Stowe
explains everything you
need to know about
boxes - from selecting and
working the raw materials,
right through to joining
techniques and possible
fittings. In step-by-step
instructions organised in
structured chapters, he explains both using machines and cutting by hand.
The author, an American
furniture designer and box
maker, provides solutions for virtually any
idea with simple and practical explanations.
151 Pages, Hardcover, numerous colour photographs,
'?^=in German.
No. 713904
_"
29.90
323
Books
~`\\{;Z|
This book offers a selection of
the best articles on design from
the American magazine Fine
Woodworking. Many renowned
cabinet makers and designers
explain possible solutions to
frequently asked questions,
from designing cabinets, to the
building of drawers under table
tops, through to custom-made
chairs. The content is easy to
understand, with numerous photos and drawings,
and gives a clear insight into the often complex art of
furniture design.
185 Pages, Paperback, many colour photographs and
=?_
No. 713555
&""
13.90
3\|;`3<;Z
Peter Lloyd:
Professional woodworker Peter
Lloyd presents 11 exquisite boxes
in solid wood that manage to be
elegant, original and practical at
the same time.
;7 ?
piece of hardwood.
No other materials
are used, allowing
the woods figure
and the individual
design to speak for
themselves.
&2"~=
Paperback,
numerous photos
and illustrations,
&^?_
No. 713265
&_"
16.90
&~~Z]`[;`;`
Percy Blandford:
;
~
Blandford, who worked mainly as
a furniture and boat designer after
the war, has compiled 1,000 tips
for woodworkers in this handy book.
=
=
were published in various British and
American magazines under his name
or a pseudonym. The tips are divided
into subject areas, from preparation
and design, to working with hand and machine tools,
right through to surface treatment and sharpening.
^2"~=
=7
=
&_?=in German.
No. 713596
26.80
<;|;
Wolfgang Fiwek:
How do you bend or deform
wood? This book presents
the whole spectrum of different methods. In addition
to basic procedures and the
required equipment, Wolfgang Fiwek gives an insight
into all manner of workshops, from cane makers to
musical instrument makers
to boat builders. Readers
will also find practical and
individual solutions used by
different manufacturers and craftsmen to bend wood.
&"~=
=
=
&?_2=in German.
No. 713624
^_"
39.90
324
||[;|`\
Mike Abbott:
In his new book, Mike Abbott
explains how to make chairs
easily with modern tools that
are easy to get hold of or make
yourself. For many years, the
likeable woodworker has focused
on making historical chairs using
the common tools of the period.
In his third book, he has applied
the invaluable knowledge he has
=
2
#
jects that are easy to understand even for the layperson.
&"~=~
7=
=
_?&
No. 713661
&"^
20.90
#;\#=<{;
Ulf Lohmann:
A comprehensive
reference work
on wood from
A to Z, fully
revised, by Ulf
Lohmann. The
two volumes
cover all kinds
of subject
areas, including
wood science,
woodworking and
wood processing,
wood pests,
wood preservation, surface treatment, forestry and much
more. Terms are described in clear detail by renowned
authors with the latest knowledge, while colour and
black and white pictures, diagrams, graphics and tables
provide valuable additional information. This lexicon
leaves no question unanswered. 15700 keywords.
&'~=
=
=
?&'=in German.
No. 713015
&&2' 125.00
Z{|;
Hans-Peter Sutter:
This important handbook for
monument conservators, restorers, architects and wood
experts explains in detail
how to identify and control
fungi and insects that destroy
wood. From basic knowledge
of the microscopic wood
structure, which is shown
in spectacular photographs
from a scanning electron
microscope, to how fungi and
insects work on the wood,
right through to preventive
and acute control measures, the book explains all aspects. The complex subject is presented in a way that is
easy to understand using numerous colour photographs,
while still providing an impressive depth of information.
&22~=
=
=
?&_=in German.
No. 713620
_"
49.00
Z{]``;
Renwick Gallery:
This impressive compilation
presents Americas finest
studio furniture pieces from
the Renwick Gallery of the
Smithsonian American Art
Museum. The appealing edition shows 84 breathtaking
furniture pieces and provides
insight into their making was
well as into their makers
training and professional
experience. An absolute must
read for all woodworkers.
~=~
7=
=^?^
No. 713923
_&
29.00
;\`]3\`;`
Craig Vandall Stevens:
The techniques of inlaying are
presented in hundreds of step-bystep illustrations, from the first
drafts to the completed workpieces.
Several tips for tools, materials,
and methods lead you through
four projects, from simple to
sophisticated. A photo gallery of
finished workpieces is included for
inspiration.
"2~=~
7=
=_"?&2
No. 713934
&__2
19.00
\;`3<;<\
Dirk Schellberg:
From the classic wooden cantilever
^{
printer. This book gives an overview
of classic materials and methods
to the latest manufacturing technologies and demonstrates various
possibilities of combining them.
It provides designers, carpenters,
interior decorators, and furniture
manufacturers with inspiration and ideas for creating innovations beyond the traditional paths. Including many
examples of creative furniture building and practical
information for new plans.
&2~=
=
=^?^'=in German.
No. 713936
2_
59.99
]`;`;\`Z;
Wolfgang Fiwek:
Inexpensive base materials can be
enhanced by aesthetically valuable
surfaces with veneering techniques.
Veneer bits of different colors and
structures can additionally be used
to form inlays of different patterns
or pictures in the surface of the
wood. In practical, step-by-step
instructions, this book shows you
how to apply veneer to wood, what to take special care
of, and also how to handle certain workpieces, such as
curved surfaces.
^'~=
=
=_'?&2=in German.
No. 713922
^_"
39.90
]``;[Z
David Savage:
In Furniture with Soul, David Savage explores the
philosophy and career of today`s most talented and
influential woodworkers. These furniture makers
#
@#
line craftspeople, creating handcrafted objects in
the small workshop, uninterested in mass-produced
products. David Savage, one of the world` s most
highly regarded designer and furniture maker takes
the reader into their workshops and shows their
exceptional pieces of furniture which are stretching
artistic boundaries.
^&~=
=
#
7
=^&?
No. 713919
^"
36.90
Books
\{<[;`;
Phil Davy, Ben Plewes:
This book provides easy step-bystep instructions for everything
you need to know to get started
with woodworking. Completely
illustrated, it covers all work steps
from the choice of machines,
tools, and materials to the right
kind of joints, fittings, glues, and
surface treatment techniques.
A comprehensive volume for beginners and a useful
reference book for professionals.
'_~=
=
='?=in German.
No. 713924
_&
29.00
;`<{|;
Gary Rogowski:
This book is a complete
compilation of Western
style wood joinery: from
the most basic of butt
joints to sophisticated
mortise and tenon joints.
;
&
picks up on the specific
problems, techniques,
materials, and tools
that are relevant for
;
explained and step-bystep illustrations show you how to make them. Several
tips and cross-references included. A reference book for
beginners and ambitious professionals alike.
^^~=
=
='?^'=in German.
No. 713925
22
49.90
[;`;#
{;<;Z;~`;;
From small to large, from a
smart gift to a foldable dining
room table. From simple to
sophisticated, from quick
and easy to time-intensive:
ambitious woodworkers are
sure to find new challenges,
^
construction manuals,
from a cake server to a
garden bench.
&~=~
7=
photographs on every page,
&?"_=in German.
No. 713937
&'2
19.90
Carpentry, Architecture
DAS HOLZBAU-BUCH
Adolf Opderbecke:
Anyone who is interested in classical wood construction will find all
the information they need in this
reprint of a standard work from
1909. The wood joints, wall and
roof structures,
stairs and
interior fittings
are explained
comprehensively in detailed
drawings.
^~=
Hardcover,
_^2
illustrations,
^=
?'=in German.
No. 713402
""&
32.00
{\Z33;`3\Z<
Theodor Krauth and Franz
Sales Meyer:
This textbook has lost none
of its topicality since its
first publication in 1895.
; =
or restorer interested in the
traditional techniques would
do well to consult it. From
material science
to decorative
carving, all
aspects of the
craft are
discussed in
detail.
&~=
Hardcover,
&^&=
^2&#
rations,
&_?=in German.
No. 713799
`\3\];<\3Z;`
Alain Laurens, Daniel Dufour and
Ghislain Andr:
^?
in wood are presented in this
book. The team around La Cabane
Perche is becoming more and
more ambitious and refined when
it comes to the constructions. Not
a single tree will have its groth
interrupted and no metal will harm
the bark. Superb pictures of the
tree houses and their exclusive interiors as well as spectacular views await you. This book is full of ideas and
made for anyone who longs for their childhood dream of
a life up in the trees.
&~=
=
=^2?2=in German.
No. 713897
2
45.00
^
27.00
`\`[`\`~;`\{;`
George Collings:
The knowledge of how to lay out
and make simple and complex
curved pieces in carpentry and
joinery was long forgotten. This
book consists of original texts
from master carpenter George
Collings, who already wrote on
this subject in the late 19th
century. It provides detailed
instructions for many projects
- from laying out round window
frames to making mitres meet
under unusual angles, right through to constructing
a conical roof for an oriel window. The original texts
are supplemented with additional notes from todays
perspective, which allow the reader to follow even
complicated aspects.
&2~=~
7=7
=?'
No. 713210
&"^
20.90
BLOCKHAUSBAU
Ralph Pfersich:
Do you want to build a blockhouse
or have you always been fascinated
by the technique? With impressive
photographs and brief but detailed
descriptions, this book paves the way
to the finished house of your dreams
and also covers subjects such as
interior fittings and roof construction. The author Ralph Pfersich has
found his passion in building with
logs after a career involving many related activities,
from tool-making to forestry. In this book, he shares not
only his experience but also the philosophy of building
blockhouses.
180 Pages, Paperback, numerous b/w photographs,
&?&=in German.
No. 713899
'
30.00
;`[;{|3\ZZ;<;`;
Stefan Andritschke, Oliver Dnisch, Thomas Herres:
The quintessential guide for planners, builders, and owners. Wood
has many uses outdoors, from
facades, terraces, or balconies
to fences, palisades, or pergolas.
The choice of materials, structural requirements, and surface
treatment are among the practical
topics that this book covers. Abundant information on important
issues, FAQs, and checklists serve as decision-making
aids. Inspiring design examples from traditional to topical as well as comprehensive and concise illustrations
will make you want to start building immediately.
'~=
=
=^?^'=in German.
No. 713935
2&
69.99
<Z;`{;Z;<Z|;<\
Sven-Gunnar Hkansson:
In this technical book, the Swedish
author presents the fundamentals
of log construction. The design
basics, wood selection, joints, insulation, roofing, wood coating and
design appropriate for the material
are discussed in detail. Numerous
examples, from sauna cabins to
residential houses, are fully documented in photographs.
^^'~=
=
=&_?=in German.
No. 713213
^"
36.90
Tools
\~\;Z;[{#
WORKING TOOLS
Toshio Odate:
Japanese saws and
planes have different
designs and uses to
western tools. Toshio
Odate, a Japanese
joiner and professor of design, explains the tools
and their use in detail, and describes technical
and historical aspects. An indispensable reference
work for anyone who wants to use Japanese tools
properly.
189 Pages, Hardcover, lavishly illustrated with
7
=?^&
No. 713502
&&
22.60
\~\Z[;`;}<{{{
Toshio Odate:
This re-issued book
and the DVD with four
instructional videos open
the door to the fantastic
world of the art of Japanese joinery. You will not
only learn how to sharpen
precisely and how to use
gouges, planes, saws and
marking tools, but you
can also follow their use with various sample applications. In the DVD, a Japanese carpenter makes a range
of wood joints, and the books author, Toshio Odate,
demonstrates how to make a small sliding door.
198 pages, numerous b/w photographs and drawings,
7?^&
{{}
=&^, in German.
No. 713779
^^^
39.90
325
Books
];{`;{\{Z;;
3;\\3;3;Z
Henry T. Brown:
This small book dates from the
beginning of the Industrial Revolution and lists over 500 moving
contraptions made of cogs, disks,
levers, chains, strings, shafts and
joints. An excellent initiation into
the magical world of mechanics,
with many applications in making
toys and practical devices.
&~=~
7=
_
=&?
No. 713110
&_&
18.30
;<<
Jim Tolpin:
A Craftsmans Guide to Tool
Chests, Cabinets and Storage
Systems. As well as fulfilling
indispensable practical
requirements, toolboxes can
also be aesthetically pleasing
woodworking masterpieces in
their own right. The author
describes many types of
tool storage systems, from
the basic toolbag to the
exquisitely ornamented cabinet, and shows you how to
make each piece in numerous sketches and vivid colour
photographs.
199 Pages, Paperback, 190 photographs, 100 detailed
=?'
No. 713559
&'2
19.90
\\`ZZ;Z
Chris Schwarz:
The title comes across as rather poetic, on second
thought, though, it hits the nail on the head. In
this book, Chris Schwarz, the internationally known
author and woodworker, summarizes necessary
and unnecessary developments of tools in the area
of woodworking. The result is a list of tools that
is reduced to the utmost minimum required for
meeting the greatest challenges and that you can
fit into one single tool chest. Apart from providing
instructions on how to build a suitable storage box
for tools (i.e. the anarchists tool chest), the book
also helps
a lot in
making
the right
purchase
decisions in a
frequently
unmanageable
supply of
products.
475 Pages,
Hardcover, several black-and-white photos,
^?&2
No. 713636
_
27.50
\{<<;`]`Z;#\Z[;=<;{;;=
<;;``Z;
Guido Henn:
In this book, journalist and
master carpenter Guido Henn
explains step by step everything
you need to know about power
routers. In a clear and accessible
style, he presents various models, guides you through choosing the right cutter and explains
how to operate and maintain
your equipment. Henn also
focuses on the many possibilities of making templates,
jigs and fixtures and of stationary use, which afford the
craftsman countless ways of working. Many of the techniques, e.g. cutting dovetails, are also demonstrated on
an accompanying DVD.
__~=
=
=^?'=in German.
No. 713532
&'_
44.80
Woodturning
]\Z\{`;Z;
Michael Tingey:
The most beautiful turning
objects from the Woodtur
]
&&7
presents impressive pictures
of objects made by professionals and ambitious amateurs.
With its baffling
diversity of
classic bowls
to bizarre and
extraordinary
objects, this
volume offers
ample inspiration for all
practicing
and aspiring woodturners.
&_2~=
=
#
=2?=in German.
No. 713918
_"
29.90
|`{`Z{`;Z;
Keith Rowley:
;
=
should not have to learn from your
mistakes. This is precisely the purpose of this clearly formulated and
easy to understand standard work.
Richly illustrated, it teaches the
fundamental craft and technical
skills and introduces the various
projects.
&'~=
=_
2
=&_?'=in German.
No. 713359
_"
Finishing
<;\{|
<;`];
Derrick Crump:
Nothing is more disappointing
than a complex surface treatment
which doesnt have the desired
result. This book helps you
avoid mistakes with a thorough
introduction to the chemistry
of stains, paints,
oils and waxes
and their correct
use, as well as
surface
preparation.
&_2~=
Hardcover, over
^
=
&"_?_=
in German.
No. 713360
^^2
<;`];<;\{|
Sam Allen:
Classic techniques and recipes.
Surface treatment not only makes
wood easy to care for, it also
enhances its beauty. Sam Allen
provides all the comprehensive and
very practical traditional methods,
such as French polishing, painting,
oiling and waxing, grinding, pickling and varnishing.
&'~=
=&2
=
&?=in German.
No. 713739
""&
32.00
Bow Making
{\Z<|;<\;`#<
;
7
from the Stone Age to
today. A group of experts
focuses on the history and
;
#
bows, and offers beginners
clear instructions, and
advanced learners tips on
selecting wood and adhesives, as well as precise
dimensions for making
the different bow shapes
yourself.
^2~=
=
&_7
=&
=&?_=
in German.
No. 713349
_'
29.80
29.90
WOODTURNING TODAY
AAW (The American Association
of Woodturners):
;7
#
turners association AAW, the American Association of Woodturners,
this book is both inspiration and
information source. It vividly traces
the development of the woodturners community worldwide and
of the AAW in the past decades.
Presentations of turned pieces of art, artists, and stories
from the world of woodturning offer illustrative material
to the reader. A very apt collection of international
woodturning culture.
2~=~
7=
=__?&^
No. 713929
&'2"
20.00
`;];<|;=|;Z;{;`Z;|
For thousands of years, composite bows have represented the
finest craftsmanship and are no
less fascinating today. However,
the knowledge of these bows
had almost been forgotten. Here
many famous authors and experienced bow makers have come
together to gather old and new
information about techniques,
forms, suitable materials and
tools from the Stone Age to our
modern world. This book will not
only show you step by step everything you need to know
about composite bows, but you will also be able to use
this knowledge and the practical instructions to build
your own unique bow.
^^2~=
=
=_?&=in German.
No. 713611
'2
48.00
326
25.00
Books
{;`<|;\`3<`Z
Holger Richter:
; =
7
us with their power and elegant
shape. As much of the knowledge of how to make them
has been lost, this volume
provides valuable information in
numerous detailed photos and
design drawings. Precise dimensions and many colour panels
are an excellent basis for making
a realistic replica.
&"~=
=
=
&?_=in German.
No. 713190
^_
39.80
3;~];#<|;<
Wulf Hein:
In this book, younger
children can learn how to
make a simple bow with
arrows and quiver, while
older children and youths
are addressed with the
instructions for making
a copy of the ancient
Holmegaard Stone Age
bow. All details about
tools and materials, such as bow staves and strings, are
dealt with. Simple instructions for bow drawing and fine
tillering as well as tips for the first test shootings are
also included. Both, bows and accessories, are suited
for being built in school or youth group projects.
_~=
=
=_?&=in German.
No. 713927
_'
29.80
Boat Building
<Z<\#~`\Z;`Z]]<\
A. Brix:
&""
shows the designs of a wide
range of sailing, rowing and
motor boats, as well as coastal, rescue, pilot and fishing
vehicles in over 500 line
drawings. Practical texts
and detailed drawings make
the introduction to classical
boat building easy
to understand.
Boat owners, model
builders and boat
builders appreciate
the Brix as a
reliable guide.
^"~=
Hardcover, 494
b/w drawings,
numerous
tables,
&_?=in German.
No. 713150
2&_
<{|\Z`~\;
Gil Gilpatrick:
After supervising the construction of more than 500
^
an outdoor resources instructor in the school system
in Skowhegan, Maine, Gil
Gilpatrick shares his experience with easy step-by-step
instructions on how to build
strip canoes. Building
A Strip Canoe includes
plans and patterns for eight
proven designs, along with
directions for making handwoven cane seats and attractive, lightweight but robust
paddles. A book that will successfully guide both novice
and accomplished woodworkers through the process of
building a sturdy, ready-to-use strip canoe.
111 Pages, Paperback, numerous colour photographs,
?'
No. 713395
&_22
18.90
HOLZBOOTSBAU
[;
}
The author writes in such
clear and explicit terms that
his book will not only appeal
to professional boat builders,
but also to amateurs and to
boat restorers. The focus is
on the practical, traditional
method of building wooden
7 ;
7
the details of constructing
the individual elements,
of manufacturing and
assembling them. Two whole
chapters are dedicated exclusively to the building
materials. You will learn everything about the specific
characteristics of the different types of wood and how to
best process and store them. This book gives a unique
overview of all techniques in wood boat building: a true
classic of maritime specialist literature.
^''~=
=
=
&?&=in German.
No. 713659
&'2
19.95
Sharpening
28.00
\;`\]
Ted Moores and
Merilyn Mohr:
The art of building
a canoe. This book
explains how to build
a canoe with your
own hands in a clear
fashion. Seven North
American boat types
are presented with
their dimensions and design. The procedure for building
them is explained in detail.
~=~
7=
=
_?=in German.
No. 713406
^_&
35.00
3;ZZ;`Z`];[;{;~`]Z
Carsten Bothe:
Knives need regular care and
must be sharpened correctly.
This book introduces suitable
sharpening tools and explains the correct sharpening
technique for each tool.
It also explains the correct
way to sharpen axes, scissors
and tools. Numerous tips by
the author make sharpening
a pleasure.
&&~=~
7=
7 2
=
&'?&^=in German.
No. 713167
_"
8.50
\;Z[\ZZ\`]3\
; <
}
This compact paperback is an
introduction to sharpening all kinds
of cutting implements. Practical
sharpening methods for knives,
woodworking tools, scissors, chain
saws and even razors are described.
Chapters on sharpening implements
and cultural articles complete this
brief guide to sharpening.
&&~=~
7=
=&^?&"=
in German.
No. 713160
"
9.90
\Z3~;;Z`\;{|{;
Z\`~;|
Thomas Lie-Nielsen:
Step-by-step instructions
and abundant insider tips
are provided for sharpening
all types of woodworking tools and knives. A
discussion on types of steel
and a complete overview
of all sharpening tools and
machines complete the
most comprehensive and
technically in-depth book
on sharpening currently
available.
&2~=
=
_
=
=?'
No. 713774
_"
29.90
Z`];#|`{\|;=;;=
\Z`Z|
Thomas Lie-Nielsen:
Step-by-step instructions
and abundant insider tips
are provided for sharpening
all types of woodworking
tools and knives. A discussion on types of steel
and a complete overview
of all sharpening tools and
machines complete the
most comprehensive and
technically in-depth book
on sharpening currently
available.
&2~=
=
750 colour photographs and numerous drawings,
'?=in German.
No. 713513
^_"
39.90
\~\3;ZZ;`Z`];
Rudolf Dick:
;
to know about sharpening
Japanese knives: Stepby-step, with numerous
illustrations, expert Dr.
Rudolf Dick explains an
exact and practical sharpening technique. This book
also helps you select the
correct sharpening stones
and details the special
characteristics of Japanese
knives. Important practical
tips for care and correct
application complete this
comprehensive work.
&~=
=
=^?&2=in German.
No. 713920
&'2
19.90
;~;`];;{|;
Ron Hock:
The perfect edge - the
mystery of the virtually
indefinable, perfect cutting
[
years of knowledge and
experience, the sharpening
expert and tool maker Ron
Hock has produced the ultimate guide to sharpening.
The book covers diverse
sharpening methods and
will help you improve your
own techniques. Contains
many tips and tricks for sharpening any kind of woodworking tools, such as turning tools, chisel or plane
blades, carving blades, hatchets, saws, scrapers, drill
bits as well as knives and scissors.
^~=
=
='?&2
No. 713926
&"2^
21.00
327
Books
3;ZZ;`Z3;{;
]`\]|;`
;
|Z7
Jrgen Rosinski:
This practical manual gives
a straightforward and good
value introduction to the
fascinating hobby of bladesmithing. With countless
step-by-step photos, it shows
you how to construct a simple
smiths hearth, how to make
the necessary tools yourself,
how to forge a stick
tang blade out of
spring steel and
to make it into a
finished knife.
&'~=~
back, numerous
colour photographs,
&_?^=
in German.
No. 713796
2
49.80
{;`];`]`3
Paul Jackson:
This unique, practical
handbook provides
the basics of paper
folding in more than 70
techniques. Designing
three-dimensional
objects from paper is
an important aid to
decision-making for
architects and interior
decorators as well as
in jewellery making. It
helps with both surface
design and creating the
form of complete objects. In step-by-step instructions
with simple folding diagrams, the book shows you all
the common folding techniques, from crinkled surfaces
right through to complex saddles and arches. You will
be amazed at the three-dimensional effect you can
achieve with paper. CD with folding diagrams included.
~=
=_
=?=in German.
No. 713663
^_"
39.90
3;ZZ;`3\;[;{;~`]Z
;
|Z7
#}
A wide choice of materials, the
workmanship and the freedom of
design make knife-making a creative
craft. This book teaches you how to
make your own knife. It starts with
a brief introduction to steel and
describes the most common handle
materials and the required tools. For
beginners, the book explains in detail
the individual steps involved in making a knife, based
on various kits (including hunting knives and folding
knives). For advanced knife-makers, it contains instructions for developing and making your own knives from
scratch. Information on embellishment and decorating
techniques complete the book.
&'~=
=
?&
= <\||;`=`;
&2^?&"=in German.
;
Z
}
No. 713004
&'
16.95 Have you ever seen wooden toys in
the form of a fully functional wooden digger or combine harvester?
;
Z
7
craftsmen guides you through the
7
By following the outline drawings
and descriptions, you can make
robust toys with the simplest
;{;`
means. Fun for both children and
Josephine Barbe:
adults.
History, techniques, projects.
79 Pages, Hardcover, colour photographs and drawings
This book provides important infor
=?_=in German.
mation on the history of leather
No. 713505
&'
19.80
and introduces types of leather
>
projects, shoes, bags, cushions,
jewellery and many more items are
described comprehensibly with the degree of difficulty
indicated.
[`<\Z;Z~;;|=]\`;|;
&_^~=
=_
=
Monika Kern:
2
=?22=in German.
From flatbed trucks to racing cars,
No. 713826
^_"
39.90 this book explains the wide world
of wooden toys with fun and easyto-copy ideas. A list of the tools
you need is followed by numerous
;\`]\{Z;[|;\;`
projects which are easy to recreate
Al Stohlman:
using the step-by-step instrucVery detailed instructions on the
tions and clearly laid-out lists of
topic of sewing leather. You are
materials. The work helps develop
introduced step by step to the tools,
childrens imagination, ability and
their proper handling, and different
fine motor skills, but adults too
techniques for sewing and folding.
will find it rewarding to build the functional vehicles.
Many methods and examples are de"2~=
=
=
scribed in detail, from a simple belt
?_=in German.
to a seat cover to square and round
leather boxes. Including a construcNo. 713327
&'2
19.90
tion manual for a stitching horse.
2"~=~
7=7
=
'?&2
No. 713932
&'2
15.90
Wooden Toys
_'
29.80
Z3;{;;`;
;
#
Gunnar Norn:
The authors introduce
readers to the craft of blacksmithing in a conversational
style, starting with setting
up a workshop and foundry,
tools and metal science.
Techniques are practised
in simple and progressively
more challenging projects,
right through to forge welding. Learn to make smithying
tools, an axe head, and knife blades using laminated
and damascene techniques, fittings and blacksmith art,
among other items.
&2'~=
=
?^
=
&?=in German.
No. 713232
^2
34.90
{;`Z3;{\3\3<ZZ
Hermann Hundehagen:
A practical workbook for all blacksmiths. In practical form, this introductory book teaches all you need
to know about hand-forging. In a
modern format, it describes in detail
the required tools and equipment,
reshaping and welding techniques,
and even includes heat treatment.
An absolute must for every professional and hobby blacksmith!
&2~=
=&'27
illustrations and photographs,
&?=
in German.
No. 713305
^
328
{;Z{;ZZ3;{;Z
Hvard Bergland:
The big textbook of traditional
techniques. This book shows
you how to forge knife blades,
woodworking tools, fittings,
locks and works of art in detail
in step-by-step drawings, photographs of the objects and work
situations, as well as chapters
on material science.
^~=
=
over 1500 illustrations,
?2=in German.
No. 713715
27.00
3;[`]`Z\;#|`{\|;{;Z
;`~\|Z{;Z|Z
Paul Jackson:
This book provides insight into
the basics and construction
methods for packages and encourages exceptional, innovative
packaging formats. You will learn
how to individually design three
dimensional packages and boxes
that are specifically adapted to
the shapes and requirements of the objects intended for
packaging. Paul Jackson presents his cutting method,
developed by himself, which will help you to design
sturdy boxes, cubes, and various closures.
Over 40 packaging examples with detailed drawings.
&'~=
=
=
2?2=in German.
No. 713931
_"
29.90
Books
;]\3;3{;`Z;Z;
Bernhard Lehnert:
The scything becomes more and
more popular. For all who learned
how to do it scything is a relaxing
action in fresh air. The author
provides hints and tips for the right
choice of the scythe and how to do
the scything using many illustrations. How to peen and whet is well
described.
80 Pages, Paperback,
&^^
=&2?&=in German.
No. 713894
&^
10.95
{\Z|`ZZ;<{;`Z;<Z;`Z`||
Dick and James Strawbridge:
This contemporary title describes
a whole host of ideas for sustainable, environmentally-conscious
living in harmony with nature.
Dick and James Strawbridge, who
have their own farm in Cornwall,
;=?>
give tips for embarking on a selfsufficient lifestyle step by step.
From saving energy to generating
your own power, to organic market gardening in a small
garden, to home-made bread and cheese - this book
contains everything you need to know to lead an
eco-friendly life.
2~=
=
=
^?'=in German.
No. 713614
^^
24.95
{\Z;;<3;<;\]{;3\{;
John Seymour:
Whether growing fruits and vegetables or sowing and harvesting
corn and field crops, this book will
answer all your questions about
living off the land. It also provides
an overview of livestock breeds
and how to look after them and
vividly explains how to make your
own cheese, butter
and wine. This
extended edition
also covers such
contemporary issues
as alternative
energy supplies
and waste recycling. The wealth
of information,
engagingly presented,
makes this book fascinating reading
not just for the self-sufficient community.
411 Pages, Hardcover, numerous illustrations,
?'=in German.
No. 713126
^^
24.95
Z;<Z;`Z`||\Z{;3|\`;
John Seymour:
;
#
permarkets, a well designed garden
plot remains as important as ever.
In order to truly know what the
foods you eat contain, you simply
must grow them yourself. John
Seymours all-encompassing book
covers everything from designing
your garden, planting seedlings and
controlling pests naturally to harvesting and canning and also provides detailed plant specific information on countless
vegetables, fruits and herbs. The clearly written text and
numerous helpful illustrations make this an enormously
useful and informative volume.
2~=~
7=
=
&?'=in German.
No. 713493
&'2
19.95
{;`Z;<Z;`Z`|;`#;|\`;
Growing your own vegetables,
herbs, and flowers to contribute to
the familys healthy subsistence is
a prevailing trend. This book will
show you how to layout a decorative
kitchen garden with fruits, vegetables, and flowers, and it will explain
the best times for sowing as well as
natural methods for discouraging
slugs from devouring the lettuce.
\
&^7
?
how to plan a kitchen garden and for describing the
individual work steps that are necessary in each month.
Includes plant portraits, gardening tips, and recipes.
2~=
=
=
2?^=in German.
No. 713938
_""
29.95
<\3\Z=<`;=[\ZZ;``\{
Benoit Delalandre:
Written for children, this book
offers instructions on virtually
anything you may have tried yourself as a child - from different knot
techniques, to making missiles
and musical instruments, right
through to building huts and furniture. The practical tips and tricks
based on simple materials such as a rope and branches
will amaze even parents.
2&~=
=
=
?=in German.
No. 713619
&&
12.95
|;Z;
;7
|7
}
This comprehensive work on bird 7;7
|7
=
;
;
Award and a dedicated ornithologist, gives practical step-by-step
instructions for building birdhouses appropriate to the individual
species. The book presents 15
common bird species in Germany
and what they need for nesting. Thanks to the building
instructions with detailed and dimensioned drawings of
the individual parts, you can easily build the shelters
yourself. The book also explains the importance of
feeding birds in winter and how to build appropriate
feeders.
109 Pages, Paperback, many colour photographs and
=&_?=in German.
No. 713533
"^
9.95
OBSTBAUMSCHNITT GRUNDKURS
Uwe Jakubik:
Only fruit trees that are cut
properly and regularly guarantee
a healthy and tasty harvest year
after year. This book is designed
for hobby gardeners who want
clear and concise information
about whats important when
cutting fruit trees. From preparing
the ground to protecting the
plants, right through to the correct
pruning techniques, this book will
tell you all you need to know about cultivating your fruit
trees and increasing their yield.
"2~=
=
=&_?^=in German.
No. 713540
&2
12.90
[;`Z<Z#{;`|;;
Gnter Pardatscher:
A proper winter pruning will result
in beautiful growth and abundant
harvest. The ABC - Apple, Birch,
Cherry - guide to all common fruit
and ornamental trees with explicit
pruning instructions, descriptions
of growth forms and reactions
to pruning. Discover the plant
forms with the highest yields and
7
;
pruning cut is illustrated. Includes
useful information on the most
suitable tools.
&'~=~
7=
=&''?&^=in German.
No. 713933
"
9.90
NIWAKI
Jake Hobson:
In this book, author Jake Hobson, who broadened
his years of experience in designing Japanese
gardens during a year at a tree nursery in Osaka,
explains the techniques of Japanese topiary. The
Japanese art of shaping trees is surprisingly easy to
learn. Clear step-by-step instructions with drawings
show you how to turn a young tree into a Niwaki
or how to thin out pine needles to create unusual
patterns.
144 Pages, Hardcover, many colour photographs
=?'=in German.
No. 713618
^_"
39.90
Instrument Making
|;|;<\Z;3;[\{&"__@&"'&
Andreas Zimmermann:
By Andreas Zimmermann. This
book contains reproductions of the
handwritten notes taken by master
violinmaker Andreas Zimmermann
while attending the violinmaking
school in Mittenwald, Germany.
The notes contain step-by-step
descriptions of how to make a
violin, from the initial marking of
the wood to the final application
of the strings. The final section of
Zimmermanns notes details varnishing techniques and the properties of various resins
and dyes as well as important techniques for repairing
stringed instruments and bows. Numerous precisely
drawn sketches give the reader a clearer picture of
many steps of the techniques described.
^~=~
7='_7
=
&2?=in German.
No. 713733
_&
29.00
;\`]3\|
Chris Johnson and Roy Courtnall:
Anyone involved in the art of violin
making will love this large-format
reference book. It focuses on the
individual steps professionals use
in violin making. The accompanying drawings, detail photographs
and descriptions make the violinmaking process easy for amateurs
to understand. A presentation of great past
and present makers
with their instruments,
glossary, trade directory
and notes on various
instrument collections
complete this unique
book.
^~=
=
over 400 photographs and illustrations some in color,
?^
No. 713445
"&"
98.00
329
Books
DVDs
`{]`;~Z|
In this training film, an expert
shares with us the knowledge
of the finest form of surface
treatment as acquired by him
over many years. Peter Zehmisch
explains the materials and the
individual operations (priming,
basic polishing, cover polishing,
polishing out scratches, and fine
polishing).
{{=&
German
No. 713736
&'
;
No. 713753
&'
SURI-URUSHI
This DVD guides you through the
Suri-Urushi technique, from general
basic knowledge right through to the
actual application. The traditional
Japanese art of lacquering is over
2=
a special gloss on bowls, boxes,
handles, jewellery or furniture. Once
fully hardened, Urushi is resistant to
water, heat, alcohol, acids, alkaline
solutions and solvents as well as ageing. It is
also food-safe. Subtitles in English and German.
{{=2Language: Japanese.
No. 713807
2&
26.90
12.90
12.90
Z|;;Z=
3[|=Z\`~;|\{
~;;|=|;`3\
In this introduction, scythe
;
Z
Canadian organic farmer Peter
Vido, teach knowledge which has
virtually been forgotten. From
adjusting the snath, body position when mowing, to peening and honing the blade,
viewers will learn everything they need to know about
working with scythes.
{{=
German
No. 713734
_'
8.90
;
No. 713752
_'
8.90
|;Z;`Z;
MIT WOLFGANG
The hobby carver will learn about
facial proportions and how to transfer
them to the wood. The film is intended as instruction for independent
carving. In simple, traceable steps,
it demonstrates how to cut and carve
the details of facial features (hair,
eyes, ears, nose, and lips).
Common mistakes are discussed and
solutions offered.
{{=2Language: German.
No. 713915
'_
34.00
;|\`3\;`Z|{;]`;~Z|
French polishes have been the traditional finish for musical instruments
for many centuries. They are still the
preferred surface treatment method
for classical guitars today. This DVD
based course traces the process of
French polishing on a guitar, from
preparing the surface, filling the
pores, and applying the shellac
layers to the crucial last work steps.
Includes a brochure with useful tips
on required materials.
DVD, 150 minutes. Language: English.
No. 713921
"
53.90
4 FILMS ABOUT
{]];`;
HANDCRAFT
;;Z
;{{
Z
stones
Z
{{=&^Language: German.
Also available as a set: Book and DVD.
Z"&
No. 713709
&'
Christopher Schwarz
Christopher Schwarz is the former editor of Popular
Woodworking magazine and a furniture-making enthusiast. He built his own workbench at age 8 and helped
his father build two houses on their family farm using
almost exclusively hand tools.
Lie-Nielsen DVDs
12.90
David Charlesworth
;
His speciality is getting the most out of hand tools to
get precise results in traditional but efficient ways.
{\ZZ`];\~3;ZZ;`
A Japanese master blacksmith
with a legendary reputation in
Japan shows you how to professionally sharpen kitchen knives
on water stones. He introduces
different types of whetstone,
shows the correct sharpening
motions for sharpening single
and double-bevelled knives and
provides information on caring
for knives. Knives sharpened in this way not only make
your work easier but are also a pleasure to use and allow
you to treat your food with respect.
DVD, 15 minutes. Language: German.
No. 713806
"2
5.90
~`;Z~`;~\`\]
Z;Z]`\`\;;`
Chisels are essential tools in any
carpenters tool chest. There are
important differences between the
preparation of chisels and of planes
for precision working. This video
complements Davids instructions for
planes, examining the differences.
His techniques deal with waterstones
and the process of honing blades to
razor sharpness in only a few minutes.
{{=2Language: English.
No. 713645
&_2
{;<|;`\Z\<;
<\;;Z;|Z;
\|<|;Z
In this DVD, bow-makers Linda
Schilling and Michael Wlotzka
describe the complete process
7;
bow: from selecting the wood,
to tillering, right through to the
finishing. The detailed explanations of the individual steps will
answer all your questions.
All in all, an ideal video for
anyone interested in bow making.
{{=2'Language: German.
No. 713635
&2_
]``;3\|;;Z
This DVD explores the five most difficult planing processes in furniture
making. The first chapter deals with
getting a smooth surface directly
from the hand plane on difficult-toplane woods. The next three chapters
contain tips on correct jointing to
achieve clean glue joints, crisp,
decorative bevels to finish edges, and
how to finish planing an assembled
frame and panel. Finally, the DVD contains a chapter on
effective use of the shoulder plane.
DVD, 188 minutes. Language: English.
No. 713627
^^^
39.90
330
19.90
25.90
;[`<;
When Building furniture, you need
your workbench to be able to hold
your boards to accurately work
the faces, edges and ends. Chirs
Schwarz has built and used ten
different types of workbenches and
has experimented with many work
holding challenges and solutions. In
this DVD he demonstrates various
strategies for holding the workpiece
for these essential tasks, by designing or modifying a
workbench for efficient use.
DVD, 40 minutes. Language: English.
No. 713630
&_2
25.90
Z\[|]{\3;\Z
Learning to cut accurately with
handsaws takes practice and the
right techniques. In this DVD,
Christopher describes how to choose
the right saw for the specific job,
and the proper grip and stance.
DVD, 57 minutes. Language: English.
No. 713633
&_2
25.90
Frank Klausz
]
;
7
=
who has been working in his adopted home in New
^
<
furniture, he also writes articles for several professional
woodworking magazines and gives courses on wood
joinery and cabinetmaking.
3\|3`Z;\{;Z
Tried, tested, and versatile, mortise
and tenon joints are bread and butter
for every cabinetmaker when it comes to manufacturing sturdy frames,
chairs, tables, or racks. Frank Klausz
demonstrates how to make this joint
cleanly and quickly, using manual
tools or simple woodworking machines. The video shows how to arrange
the joints and how to chisel them out
by hand or machine or mill them out
and cut them using a band saw or table saw.
{{=2Language: English.
No. 713651
&2_
19.90
{;\\{`\[;`
Have you always wanted to know
more about producing and fitting
drawers efficiently? Then this is the
right video workshop for you. Frank
Klausz shows you how to cut dovetail
joints quickly, precisely, and without
patterns or templates. He also
explains how to fit the glued drawers
perfectly into the furniture corpus.
{{=2Language: English.
No. 713648
&2_
19.90
\{Z\[Z\`~;|
While a blunt saw blade is useless,
a sharp handsaw is a precise and
efficient tool. A true master of his
art, Tom Law shows you in this video
how to sharpen your saw efficiently
and how to keep it in top shape.
DVD, 45 minutes.
Language: English.
No. 713652
&_2
25.90
Index
Index
Bench clamps
194, &"2
Bench dogs
&"@&"2
Cabinetmakers mallet
Bench planes
'_@'', 90@"
Aberl Axes/hatchets
74
88
Circle cutter
Cabinet rasps
Cabinet scrapers
&
Circular plane
&_@148
Clamp fixtures
89, "^
Clamping device
&_@&_2
"^
187
&^', 195, 197
Bench stones
&@&2
Abrasive cloth
&
Bench vice
194, &"2
Abrasive paper
&
Bend-A-Light
&2
Aburatsubo
118
Bend rule
155
Canvas
^
Acrylic
^
Benzoin
Caps
199
Cleaver
171
Bessey Clamps
184
&^
Cocobolo wood
Adjustable wrench
180
Bevel knife
2
Carnauba wax
&2
Coconut bowls
^&_
Bindan Glues
^
Carpenters axe
79
171
178
Carpenters hammer
&
Combination pliers
&'&@&'
Combination squares
&2@&2&
Combination stones
&@&^
159
Combination tools
&^^@&^
Adzes
2_, 2"@_
Akagashi saws
104
Callipers
140, &2
Camel bones
^
117, &
Clamp systems
195
Claw hammer
&^
Claws (gardening)
Bit holders
178
Carpenters pincers
181
All-metal chisels
^2
&_
Carpenters square
&_@&'
Allongee gouges
Bit ratchet
179
All-purpose files
&2
Bits
178
^
Bit screwdriver
179
Carvers mallets
59
170
57
All-purpose hatchets
All-purpose knives
__@_'
et seq.
Alpha square
&2
Blacksmithing hammers
''
Black walnuts
Blade for scalpel
Anant Planes
94
"^
104, &2
_2, 2
_
_
@
Compact knives
2
@2
Compasses
&22
^&
@
Compass heads
&2'
57
Compass saws
Carving hatchets
2_
Cone cutter
&@&^
&2_
, "
&_2
Blades
118
Anvil
&
Block planes
Anvil pruners
^^
^2
2
Arata Hocho
&2^
Catfish leather
^
Corner chisels
Bocote
_
"^
Cotton apron
Body clamps
&'2
C-clamps
184
Countersink drill
Bone glue
Centering rule
155
Countersinks
&_
&^
&2, 110
^&@^&2, ^&'@^
_"@'&
99
84, "@""
Carving knives
2@2&, 2^@2
Carving tools
'@_, 2
Conical slipstones
&_^
109
"=^&
"
^2, 45
, ^&&
&_^
Auger bits
170
Auger gimlets
&_^
Bone plates
^
Center saver
&^
Coving tool
'
Bonsai shears
^_
Centre finder
140
Cowhide
^^
Bonsai tools
^_
Centre marker
140
Cow horn
^
Centrofix
&2'
^
2
"
_^@'
&
Books
2=&=^=^@^"
Bowl gouges
Boxwood
B
Back bent gouges
Backpack
Back saws
51
^&"
15, _@'
Ceramic peeler
2
99
&^
Creaser (leather)
_
2
Chalk line
&2_
Creusen Grinder
115
Crosshole countersink
&_
&"@&^
^, ^2
Chamfer plane
Brace
&_@&_2
Chasing hammer
&^
Crossing files
Chatter tool
&^
Crossing rasps
Checkering file
145
Crown Revolution
Bracelet
Branch shears
Brass mallets
^&'
^&@^
59
"2
^
&
&_@&'
&^^
Cheese grater
2
Ballistol
117
&2^
2
Cut-resistant gloves
Bamboo backings
^&
Brass rivets
&
2&
Cutting boards
"
Bamboo bowls
^&_
Bread knife
2
57
Cutting rule
154
Bamboo vinegar
2&
Broad axe
_"@'
Chinese chisels
45
Banksia cones
^&
Brushes
,
Chinese planes
Bar clamps
187
Brush scythe
^"
2, 2
_&
Chip-collecting cap
&_2
Bruyre wood
2
Chisel plane
^
Chisels
&&2
Bark scraper
Bead forming tool
Beading tool
74
&^
89
97
84
^2@, 44
&2_
Buffing wheels
&^&
Bullnose planes
Beeswax granulate
&2
Burnisher
100
Bush trimmer
^2
Chucks
Belgian coticule
&2@&&
_2, _'
Chisels set
Chisels (turning)
&"@&^
^
&"@&^
''
&^'@140
^'
D
Damascus blade blanks
Damascus chisels
'@'&
^_, 44
Damascus steel
^2
&
Deluxe saws
&
Desert ironwood
'
Diagonal cutter
181
Dial calliper
&2
331
Index
Handles for kitchen knives
^&
^&
Handle shells
^
Garden hatchets
_2, ^'
Hanging strop
'"
Gardening apron
, ^&&
Gardening gloves
^&
Harvesting sickle
Gardening scyth
^"
Harvest shears
^&&
Diamond files
145
Diamond pastes
''
;
2@_
|
Diamond sharpener
&^&
;?
_@"
Dibble
"
80
&2'
DICK Chisels
^
&
DICK Planes
91
'@
Fabric scissors
"
Gardening sets
Faceplate segments
140
Gardening shears
199
Garden knives
Face shield
^&@^_
"
Hattori Chisels
2
^'
^, ^
Hattori Rasps
&'@&"
&2'
DICK Spokeshave
"
Garden shears
^&@^2
&^
190
_2
Genno
&@&
^&
&2
Felling axes
_^
Glardon/Vallorbe Files
&@&
Hayashi Hocho
Digital callipers
Farming sickle
^_@^'
Dividers
140, &22
&&2
Glardon/Vallorbe Rasps
105, 110
File handles
&
Glass cutter
&"@&&
Files
118
Dog-leg gouge
51
Doming plane
174
149
&2'
^
^@^2
Hedge trimmer
^2
Gloves
, &"
&
151
Glue
^@
144
Glue brush
Hemp string
^&&
145
&
&^
Glue injectors
&@&2
File set
^
Double-bearded axe
79
_^
&2
Glue pots
80
Finger protectors
Glue scraper
100
185
78
Finishing chisels
^2, ^
Goldfield burls
^&
Hide glue
_&
Gorilla clamps
&'2
_^
2&
Gotland axe
Double hoe
"^
Fire stick
Douk-Douk
_
Fishbone tweezers
&@&
Dovetail chisels
Fishermans knives
_@_&
Gouge (leather)
Dovetail cutter
98
'@"
Gouges
Dovetail gauge
&2
Fishtail gouges
Dovetail markers
&2
Flat adze
Dovetail plane
Dovetail saws
98
&^@&
174
&^@&, &
Dragon gouge
Drawknives
51
22@2_
Dreadnought rasps
151
Drill bits
Drill chucking tools
&_
&_@&_2
Flat chisels
51
2_
Grafting knives
&
Grnsfors Axes/hatchets
Grass sickle
'@
99
2"@_
Hoes (gardening)
"
194
Hole cutter
174
_^ et seq.
^'
"@"^
Hole punches
'
Grasstree roots
^&
Hollowers
&^^
Flexible rule
154
Grater Microplane
2
Hollowing tools
&^&
Flexible shaft
178
Grenadill wood
_
Honing Compound
114
158
Grill pan
2
Honing guides
118
Floats
151
Grinder
115
Honing oil
110
Groover (leather)
"
Hook knives
Flat rasp
&_@&'
Flush-cutting saws
, _
Folding bone
_, &
Drill stand
&_2
Drill stops
170
Dusk mask
199
DVD`S
^^
'&
'@", 54, 2
Gouge-shaped adze
48, 54
Flat files
79
_
&_@&'
&2'
Grooving plane
94
2
&^&, &^
Grubber (gardening)
"^
Horn
^
117
^
Horse hair
^
Hot-setting adhesives
Household scissors
"
Gyuto knives
'@"
_@_^
155
@, "2@"_
Hook tools
H
&^
HSS chisels
Folding square
159
Habilis files
;
198
159
"
;7
45
40, 45
155
_
Fore plane
88
Half mask
199
Hunters hatchet
;; Planes
98
Forest axe
_^
Halfmoon knife
2
98
Forest hatchet
_^@_
Half-round files
&
;#7
_
Forest saw
""
Half-round rasps
;#
184
Forks (gardening)
"
Hammers
98
Forstner bits
&_@171, 175
&_@&'
Hybrid chisels
78
2@2'
@
&@&, '
Hand-cut rasps
&_@&"
;
"
Frame saws
2
Hand drill
&_2
;
^^
2
Hand grinders NT
&2
187
^
332
&"@&^
^
&^
'&
Hand hatchet
Handicraft
78
^&@^&2, ^&'@^
^2
Impregnation spray
&
Inden-Ya
^
Index
Indian trade axes
78
^&
2
Linen thread
"
Mitre trimmer
198
_"
&
Moisture meter
&2
Lionsteel Knives
^_
195
&^'
Mono steel
Inspection mirrors
&2
&^
Mopane wood
_
Mortar
2
Insulation cutter
Iron mitre plane
&@_
Kitchen rasp
2
Locksmith`s hammer
^&
Kitchen shears
2&
Log dog
'2
Kitchen utensils
'@2
Log scribe
2, _
&2_
80
&22
^2
Mortise axe
80
Iron-oxide pigment
Klemmsia Clamps
&'2
Long-handled gouges
Isinglass glue
KliKlamp
185
Long Johns
Ivory alternative
^
Knife blades
_"@'&
Knife blocks
'
&2
91
&2
'2
Multi-clip
Knife handles
^&
J
Jack plane
Knife kits
Japanese blades
_"
Knife pendant
117
Knife rests
Loppers
58
41
Mosaic puzzle
^&2
^@^
Mother-of-pearl
^
85, 90
Multi-angle vice
197
^^
'&@'
_
'
Mortise chisels
97
188
Multiform stones
&"@&&
Multi-layer steel
^2
&"2
&_
Knife sets
_, _
Machete
^'
2^@2
Knives
&@_
Machine-cut rasps
149
@2
Magnetic pickup
&2
Japanese chisels
^_@
Kobiki saw
&
'
Nagura stones
104, &2
Kugihiki saw
_
198
Nail puller
&@&2
Japanese square
&_@&'
Japanese hammers
&@&
&_^
^2
Kunz Planes
Magnifying glass
&2
Nails
&22
184
Nail starter
99
Kusakichi Hocho
^
Mallet axe
74
Nakagoshi Hocho
Mallets
59
Naniwa Stones
"@"2
^&@^
Nata (Cleavers)
&2'
2
Marking chalk
&2_
_2
Marking gauges
&22
Natural stones
Lathes
&^2
Marking knife
&2'
Needle files
Leaf-rake
"
Marking rule
155
^&
Lace cutter
&2
&^
^
'"@"
&2_
&@
'_
Japanese scissors
&
Mammoth tusks
Japanese razor
Japanese saw
"^@"
_2
58
&2
&2, 110
144
100
Japanese shoes
&_
Non-skid mat
Japanese socks
, ^&
Leather apron
Masur birch
2
Notebook
2
Leather balm
&
Mat cutter
&
&2_
&'
&
Matsune Hocho
Nuts
^&
Jinzo Stone
104
'2
Mc Naughton System
&^
Jointer plane
''="
Leather cream
&
_
&@&_
Jig saw
Jinoko clay
Leather
^@^^
^
105, 111
^&"
JSP PowerCap
199
Leather dressing
&
Measuring instruments
Juniper grained
2
'
Obsidian
'
Leather knife
2
Metal drills
&_
Obsidian knife
'
Leather oil
&
Micarta
^
&&
Leather plane
2
&^
Oils
^&
Kfer Calliper
157
Leather products
^&"@^
2
Oilstones
Kangaroo leather
^^
Leather purse
^&"@^
150
_', '2
171
Olivewood
Kataba saws
Katsuhiro Hocho
Leather scissors
2
145
One-hand clamps
'@"
Leather skiver
_
Mini chisels
^2,
One-handed hoes
181
Leather straps
^^
&2@&',
Keiba Pliers
&^
Keyhole saw
Kindling splitter
King Stones
Kirjes Sanding system
2
Mini hammers
Mini hatchet
&&2
Lie-Nielsen Chisels
^
&^^@&^
Lie-Nielsen Planes
'@89
, "
75
&, 109
&
Mini planes
2&
&
77
95, 97
117, &@&2
&2, 110
^'@^"
2
&'@&'2
"^
^&@^
Oneway Lathes
&^2@&^_
&^"
&^'@&
Light clamps
&'2
157
Orange oil
&2
Lindenwood
2
Mitre clamps
187
Ornamental punches
'
Linen
^&
Mitre saws
Linen micarta
^
Mitre squares
^
Ostrich sinews
^
158@&"
Outdoor blades
_"@'&
333
Index
Outdoor knives
Point tool
&^
Rocker knives
140
Polishing devices
&&2
Rock pick
&^
Scribing tools
^&
Polishing paste
117
Roller balls
198
Scroll saw
Polishing powder
&&2
Roll mortar
2
Poppy-seed oil
&
Sculpting tools
'@'
Pot
2
Roofing hammer
&^
Sculptors gouge
49, 54
2@_2
Outside callipers
Overshoes
Oyakata folding saw
@, "2
2, 2
Scriber knife
&2'
140, &2, &22@&2_
^
57
^&
Sculptors hatchet
Paddle strops
&&2
Precision protractor
155
"
Scythes
Pakka wood
^
Precision rule
155
Rose shears
^
_
Sewing holster
Powercarver
2
Precision T-Rule
155
Rosewood
Palmwood
'
Prong claw
"^
Pan
2
Prong hoe
"^
Rounding plane
Pantograph
&2
Prong rake
"^
Round rasps
Paper cutter
&
Propolis granulate
&2
Router plane
Paper micarta
^
Protective cap
&2'
Rozsutec stones
Paperstone
^
&2
Protractors
Palm gouges
2^
Paraffin wax
118
Sharpening sets
&2_
Pull pliers
181
Rust remover
117
197
Pumice powder
Ryoba saws
Sharpening stones
&@&"
Punch awl
&2_
Sharpening systems
&&, 115
Purfling cutter
&2'
Shaving brush
^"
198
^
@^
2@2&
'@
Purse
Puzzle boxes
^&"@^
^&
Q
Quick-change saws
Quick-lever clamps
Quick-sharpeners
Pfeil Chisels
^2
^2
2@2^
2
2@2^
&'@19, &
Saddlemakers needles
"
Saddle soap
&
198
22@2_
Saku Hocho
_
2
Salmon leather
^
Sanding block
&
Santoku knives
Sashigane (jap. square)
^>
158
191
Shaving soap
'_@''
Sheep leather
^
Shellac
Sheoak
'
Shigefusa Hocho
Shigeki Hocho
115
Shoemakers hammer
'
Shoji paper
^
^
Saw cases
^
Shovels
Saw files
^
Sicilian olivewood
Rake
"
Z
Rams horn
^
Saw rasps
''
&&&@&&, 115
'_
Saw bags
&@&&2,
Shaving horse
Safety goggles
2
104
Rust eraser
^"
Shapton Stones
^&@^
157
2
^&
Pruning shears
&"2
&"@&&
&'2
&"@&^
^&
Shaped stones
Sharpening paste
188
Pen Blanks
Shaker pegs
Sharpening devices
Parquet clamp
'2, 98
&2, 110
&
48, 54
Peening hammer
&
154
Paring chisels
Peening anvil
Shaker nails
Rules
Parallel marker
Peeler
148
Rubber hammers
Parallel clamps
^&
"2@^
^2, ^
Parting tool
"
Shaker box
98, 174
Rubber boots
"
Sewing scissors
Pruning saw
Parallel chisels
Parallel vice
2
&"@&^
2_
^"
^@^&
150
99
"
2
Sickle cleaver
_2, ^'
Sickle hoe
^'
Sickle knife
"
Picard Hammers
&^
Pilot drill
&_^
Ratchet screwdriver
180
^
Sickles
Pine tar
&2
Rattan
^&
Saw sets
Side axe
Pinking shears
"
Rawhide hammers
&, '
^&
&&2
_
Razors
'@'_
^&
"_
"_
Pipe pliers
&'
Plane blades
Planes
99
'@"&, "^@""
Planting hoe
"^
Planting knife
"
Planting trowel
"
Plastic mallets
59
Pliers
&'&@&'
Plug cutters
&_^
Plumb line
&2^
84, 90, "^
&2
Rasps
&'@&&
^^
Saws
Scalpel
&2'
^_@^'
79
^
Schrckenfux Scythes
^"
Silky Longboy
^
Reindeer horn
^
Schrder Bits
178
Silky Oyakata
"2
Reindeer leather
^^
Scissors
^&"
"2
Scorp gouges
Scraper blades
'"@"
58
Silky Saws
117, &
100
Skew chisels
^2
44
Retriever
&2
Scraper holder
100
Slicks
Revolving centre
&^'
Scrapers
&^
Sliding bevels
&2&@&2
'
Scraping planes
Slipstones
&"@&&
2
Rice pot
Riffler rasps
Ring tools
&'@149
&^&
Screwdrivers
Screw-removing pliers
Smoothing plane
Snakewood
"&@"
'
Snips
&'
Socks
Index
Ulmia Sliding bevel
&2&
Wood clamp
^
158
Wood drills
Tagua nuts
^&
Ulmia Workbench
194
Wooden dowels
^&
188
Tailors scissors
"
^
Wooden nails
&
"
Tamahagane
^2
178
Wooden puzzles
^&
&2
Urushi bowl
^&
Wooden screwdrivers
180
Soft-face hammers
&
Solar kits
^&2
Tadafusa Hocho
Sommelier knife
2&
Spacer
Spade
Spindle gouges
&'2
&_@&_&
&"@&^
Tape measures
&^
Tapered chisels
^&
Wood files
&2
Spirit level
&2^
&_^
Urushi lacquers
&_
Wood glues
^
174
Urushi products
&_@&'
175
Usuba knives
Splitting axes
_@_
Splitting hatchets
75
Tape tensioner
188
Woodturners jacket
140
Splitting maul
75
&^
Woodturning assortment
_
Splitting wedges
_2
Tea bowls
2^
&@
&"&@&"
&@, _
Spokeshaves
'"@"="=94, 97
Tea boxes
2^
Spoon-gouge
2
Tea pots
2
Valtitan files
144
Workbenches
Spoon-knife
2&
Teapot stand
2
Variable burnishers
100
Working clothes
&
Wrecking bars
Spreader clamps
185
Teapot warmer
2
Vaseline
&'2
Tee short
Vegetable knives
&^'
Spur driver
Square
Square bench dogs
Square hammer
Telescopic mirror
&2
Veneer hammer
&
^
Veneer knives
&2'
&"2
""@^
Veneer saws
_
&@&&
Tenon cutters
174
Veneer tape
Square mallets
&
Texturing tool
&^
118
Stabilised wood
"
Thonging chisels
"
&22
Stag horn
^
&^
Veritas Planes
^
Titebond Glues
^
&_^
Stair Spider
&2
118
Vine shears
^&
111
V-Parting tools
94
Starrett Square
&2@&2&
88
Vulcanized fiber
90
Toolholder
Steel
^2
184
Tool sets
191
&&2
&^
Wallets
'
^_
Warding files
&
Stitching groover
_
Tormek Sharpening
&&@&&
Warrington hammer
&^
Stitching pony
"
Tormek Accessories
&&^
^
Stitch marker
"
Traction clamp
188
Watering cans
^&
Stone holder
111
Trenching hoe
"
&'
Stool LeiHo
^&'
Trimming shears
^, ^
Storage container
^&"
Triple-layer steel
^2
2
Trough-makers adze
'
Trueing blocks
70
171
Waxes
&2
Weeding hoe
"
110
Wenge
'
&^
Trueing grille
110
179
Try square
159
Western hammers
&^
&
&
^2
151
Turning tools
&"@140
"'@""
&^
Turpentine oil
&2
Wet-shaving set
'2
Tweezers
&2^
Whetstone
^&
2
&_
^2
2
Two-handed hoes
"
Wiha Bits
178
Swivel knife
2
Swivel vice
197
Synthetic waterstones
&@&&
190
57
^{#<
171
^{#
^&"@^
^2
&2^@&2
^
2
Surveying tools
Yari-Kanna
198
Suehiro Stones
Yak horns
^
_
50, 54
Strap cutter
&@&2
&@, _
&'@&"
Stanley Planes
170
Wildlife hatchet
78
Wild olive
2
Wind bells
^&
Wind-chime house
^&
98
Wire cutters
181
&22
Wire saw
""
158
2@2
335
ants
p
i
c
i
t
Par
ve a
recei OUNT
DISC hases*
%
0
1
purc ion
y
n
a
on
durat p
e
h
t
o
for
orksh
w
a
of
10 % discount
For the duration of a workshop, participants will receive a 10% discount on any
purchases* made in our shop.
Bonus card for workshops
Loyalty pays! After participating in five workshops,
you will receive a 50
DICTUM shopping voucher.
For each further participation, the value of your
voucher will increase by 10 .
You will receive the bonus card
automatically on registration.
Combination bonus
You will receive a 20 DICTUM shopping voucher for booking a combination of basic and
advanced courses or a series of courses.
Apprentices
Upon verification, apprentices will receive a
10% discount on workshop fees.
WORK
SHOPS
WO
SHORK
201P2S
=
within the period mentioned above, as soon as you receive our order confirmation (acceptance of order) or as soon as the goods ordered are delivered to you.
1.4. In the event that we cannot accept your offer, we will also notify you within the
period mentioned above.
3. Right of return
You may return the goods received within one month without stating any reasons
simply by sending them back. This period begins upon receipt of this instruction in
writing (e. g. as a letter, fax, e-mail), but neither before the goods have been received
by the customer (in case of recurring deliveries of similar goods not before receiving
the first partial delivery) nor before we have fulfilled our duty to inform pursuant to
2
&
&
\
|
$;|<|<%
^&
&
&
|
$<|<%
2
^
;|<|< 7
7
$
bulky goods) you may also return the goods by declaring your request of return in
writing. To comply with this term, it is sufficient to send the goods to be returned or
your request of return in good time. In any case, the return of the goods shall be at
our risk and for our account. Please send the goods or your request of return to the
following address:
{3|7={
&="23=|
=
=
Fax: +49-(0)991-9109 801
Consequences of return
If goods are returned in accordance with these terms and conditions, any services
received on both sides and, if applicable, possible benefits must be returned or refunded. Should the product reach us in deteriorated condition or if you are unable to
return the benefits you have received (e.g. from use), or can only return these in part
or in deteriorated condition, then you will have to compensate us accordingly. This
does not apply if the deterioration is exclusively due to putting the merchandise to its
intended use. You will only have to compensate received benefits if your use of the
product has gone beyond simply checking its features and functions. Checking the
features and functions means testing and trying out the product, as is permissible
and commonplace in a retail store. Obligations regarding refunds of payments have
7
^
7
request of return and for us upon receipt thereof.
End of Instructions on Return of Goods
The right to return goods does not apply in the case of
1. distance contracts for the delivery of goods that were made to customer specifications or are clearly tailored to the customers individual needs.
the delivered data medium has been unsealed, or
^
=
have given your consent to the contract by phone.
General information
1. Please be careful to avoid damage or contamination of goods. If possible, return
the goods in their original packaging with all accessories and all packaging
components. If necessary, use additional packaging for protection. If you no
longer have the original packaging, make sure you return the goods in suitable
packaging that ensures sufficient protection against damage in transit.
~
=
7
se the postal charges in advance.
^ ~
&#
return goods.
4. Terms of delivery and shipping / Place of performance / Transfer of risk
4.1. Place of performance for our obligation to supply shall be our head office in
"23|
]
=
7^
Shipping is covered by insurance at all times. It is up to us to choose the route
and method of shipping.
;
} For legal transactions between us and end consumers, the
performance risk in case of shipping shall be transferred to the customer upon
handing over of the goods, or if the customer is in default of acceptance.
Companies/Commercial customers: For legal transactions between us and
companies/commercial customers, the shipping of the goods ordered shall be at
the customers own risk.
As soon as we have delivered the goods to the supplier/forwarding agent in good
time, we have fulfilled our obligation to perform the contract. For any delays
occurring in the delivery process, only the supplier or the customer shall be
responsible.
Cash on delivery (only possible for deliveries within Germany): The cash on delivery
;
77
7
;
must be paid to the delivery service. We reserve the right to restrict the payment method for new customers to advance payment and also to carry out further deliveries
against advance payment.
For new customers or in other cases, we reserve the right to restrict the accepted payment
method to advance payment by bank transfer, credit card or cash on delivery.
]
#;
}~
;\
7
when placing an order. If you do not have such a registration number or if you fail to
7=7 7 |
\
;
;
6. Prices
2& 7 =
the applicable value-added tax valid at the time of printing of the catalogue of 7 %
or 19 %, depending on the type of product. We reserve the right to adjust the
prices, if the VAT rate is altered. For the end consumer, the gross price including
VAT, which is printed in bold, shall be the only valid and binding price. The net
prices are only shown in order to provide a better overview for our commercial
#;
2
& 7
&\
date, we reserve the right to make price adjustments which are due to shortterm price changes on the part of our suppliers, currency fluctuations etc. Any
& 7
& 7
online shop (www.more-than-tools.de) will be accepted on the basis of the catalogue prices (order confirmation), if no price alterations have been necessary. In
the case of necessary price alterations, we will make you a new price offer which
7
=
receiving the offer in writing (letter, e-mail, fax). If you do not accept the offer,
the contract shall not be concluded. You can avoid this complex still necessary
procedure by placing your order through our online shop.
2^ [ 7
2 <
}7
#
part of the publisher, we shall be obliged to charge you the new price.
7. Reservation of property
All goods delivered shall remain our property until they have been paid in full, regardless of the expiry of the return period.
8. Removal of defects/ warranty, guarantee
8.1 We grant a three-year warranty on the products delivered by us. The warranty
claim shall be excluded, if the goods have not been used or maintained properly
according to the manufacturers recommendations. The warranty shall be granted after we have chosen the appropriate remedy, either by repairing the defect
product or by delivering a replacement product. The warranty period shall begin
upon delivery of the goods. Defects in wood intended for further processing shall
be excluded from this liability after the expiry of the sale or return (see article
5.). This applies for example to cracks and shrinkage of the wood, even if it has
been dried artificially. Besides, the statutory warranty regulations shall apply.
'
&&=7 #
ble to raise legal warranty claims.
9. Data protection
We will use your contractual data only for the purpose of processing your order. We
will store and process all customer data pursuant to the appropriate regulations of
the Bundesdatenschutzgesetze (BDSG) (Federal Data Protection Act) and the Telemediengesetz (TMG) (German Act for Telemedia Services). You are at all times entitled
to obtain information, to adjust, suspend and delete your stored data free of charge.
Your personal data, including your home address and e-mail address, will not be
passed on by us to third parties without your explicit and (always) revocable consent.
The only exception to this regulation refers to our service partners, who require the
transmission of data to process orders (e.g. the forwarding company charged with the
delivery and the bank charged with the payment processing). In these cases, however,
the information transmitted is restricted to the required minimum.
337
[;3;`Z[\{Z\;Z`3
Testing.
In our headquarter in Metten, you can try tools before you buy them.
How do they feel in your hand? Which special features do they have?
Our experts will assist you with valuable information and tips.
Express deliveries: you will receive your express delivery the fol
]
?
;
&^
7
International
Free delivery:
?
;
^_
$;
^%]
;
^
charges will be invoiced as follows:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
338
The shipping charges for the remaining countries that are not listed
above can be found on our homepage www.more-than-tools.de/shippingcharges. There is no free delivery to these countries.
< $
&
%}
surcharge Euro 11.90 gross (Euro 10.00 net).
Keyword search
Special offers
Order Hotline:
Telephone: +49-(0)991-9109-902 or +49-(0)1805-9109-902*
Fax:
+49-(0)991-9109-802 or +49-(0)1805-9109-802*
{3|7{
&"23|
*(14 cents/min. from German landlines / calls from mobiles may cost more).
www.more-than-tools.de
Value 5.00