Académique Documents
Professionnel Documents
Culture Documents
Products
To receive a calibration and/or repair quote-RMA from R.A.E. Services Inc.
Click here>> www.raeservices.com/services/quote.htm
112
Ophir is the worlds leading supplier of OEM laser power/energy measurement instrumentation which can be built
into host systems. Moreover, our OEM meters are the principal products used in medical and industrial laser
systems. With extensive experience accumulated in the field, Ophir offers the largest variety of OEM products and
is therefore best able to satisfy customer requirements. In addition to the products described below, Ophir has
Laser Power
& Energy
developed hundreds of other OEM products. Simply contact your Ophir representative who is likely to have just
the right solution to your needs.
Features
Aperture
Size
Power Range
20C-SH
12mm
38x38x14mm
20mW-20W
N.A.
116
20C-A
12mm
38x38x34mm
20mW-20W
0.1-1V/W
116
L30C-SH
26mm
60x60x38mm
80mW-50W
N.A.
117
L30C-A
26mm
60x60x38mm
80mW-50W
0.1-1V/W
117
100C-SH
18mm
48x48x14.5mm
60mW-100W
N.A.
118
100C-A
18mm
48x48x14.5mm
60mW-100W
0.04-1V/W
118
150C-SH
18mm
50.8x50.8x33mm
60mW-60W
N.A.
119
150C-A
18mm
50x50x38mm
60mW-60W
0.04-1V/W
119
150W-A
18mm
50x50x38mm
60mW-150W
0.04-1V/W
119
L150C-A
50mm
80x80x45mm
200mW-150W
0.04-0.4V/W
120
L250W-A
50mm
80x80x45mm
200mW-250W
0.04-0.4V/W
120
OTHER HEADS Ophir has many other OEM heads. Please fill in the questionnaire on our website www.ophiropt.com
or contact USA: sales@ophiropt.com; Other: sales@ophiropt.co.il and we will find the OEM solution for you.
Energy
Range
Range
Power
0.4-3m
Aperture Spectral
Features
Size
Page
0.1mJ-10J 50W
1000Hz 50.8x28mm
122
Freq.
PE25-A-DIF
PE10-S
12mm
0.19-3m
2J-20mJ 2W
400Hz 50.8x14mm
123
PE10-S-Q
12mm
0.19-3m
2J-20mJ 2W
124
Beam Profile
Wavelength
Head
Integrated Systems
Standard Thermal OEM Heads - Smart Heads or Built in Amp with Voltage Output
Displays
Heads
PE25-S
PE25BB-S
0.1mJ-10J 10W
40Hz
50.8x14.5mm
125
10W
20Hz
50.8x14.5mm
125
0.4-3m
3mJ-10J
30W
20Hz
50.8x18.5mm
125
0.19-3m
1mJ-10J
20W
10Hz
75x14.5mm
126
10Hz
75x14.5mm
126
PE50BB-S
46mm
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
113
OEM Products
15mm D
TO TARGET
LASER
b. Sampling Mode
In this mode, the laser is usually available to the user and is only deflected to the monitor for short times when the
beam is sampled by the head. Sampling is performed with a deflection mirror or with an output fiber optic cable
which is inserted into the measuring port from time to time.
TO TARGET
flexible cable
LASER
OEM Head in
measuring port
0.5-2%
LASER
98%
TO TARGET
114
Displays
Heads
Laser Power
& Energy
Ophir offers OEM heads for almost any type of laser, power or configuration. These heads can be calibrated
for CO2, YAG, Argon, Excimer, Cu vapor, Ruby, Holmium, Erbium, Dye, Diode and other types of lasers. Although
the power measured usually ranges from 1-150 watts, the heads can measure from tens of mW or mJ to
Kilowatts or hundreds of Joules and can be cooled with water, air or conduction. Ophir offers a large selection
Beam Profile
Wavelength
Versatility
Integrated Systems
of standard OEM heads at competitive prices and excellent delivery times. If required, the package,
not burn out or change reading with high power density lasers are available for almost every application.
115
OEM Products
Calibration
Sensitivity:
0.1, 0.4 and 1.0V/W standard for 20C-A with built-in amplifier
0.8s
Dimensions:
Absorber:
Cooling:
Calibration:
SH version calibrated for visible (V), CO2 (C) and YAG 1.064m (Y)
A version is calibrated at customer selected wavelength
Ordering Information:
Note:
With A version, maximum power is also limited by maximum output voltage as follows:
Sensitivity:
0.1V/W
0.4V/W
1V/W
Max power:
20W
12W
5W
20C-SH
FRONT-VIEW
20C-A
SIDE-VIEW
6.5
2 SIDES
38
12
REAR-VIEW
4 PIN MOLEX
CONNECTOR
14
28
38
34
12
4.7
5.5
38
28
28
MOUNTING HOLES
(2x) M4x7deep
2 SIDES
28
MOUNTING HOLES
(4x) M4x4deep
12.5
8-32 UNC
FOR MOUNTING ROD
REAR-VIEW
SIDE-VIEW
116
FRONT-VIEW
Laser Power
& Energy
L30C-SH, L30C-A
Recommended Use: Power measurements, 0.19 - 10.6m.
Special Features:Large aperture, conduction cooled.
SH version without amplifier has
1.5 meter cable and smart head connector compatible with all Ophir smart displays
A version has built-in amplifier
Average Power:
Sensitivity:
0.1, 0.4 and 1.0V/W standard for L30C-A with built-in amplifier
1.5s
8 to 15 volts, regulated
Dimensions:
as shown in drawing
Absorber:
Cooling:
Calibration:
Heads
SH version calibrated for visible (V), CO2 (C) and YAG 1.064m (Y)
A version is calibrated at customer selected wavelength
Ordering Information:
Displays
Note:
With A version, maximum power is also limited by maximum output voltage as follows:
0.1V/W
0.4V/W
1V/W
Max power:
50W
15W
6W
L30C-A
38
38
60
19
13
60
19
13
24
34
60
26
60
26
34
26
MOLEX 6471
(2x) M3x5 deep
MOUNTING THREADS
2 SIDES
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
117
OEM Products
L30C-SH
Integrated Systems
Beam Profile
Wavelength
Sensitivity:
100C-SH, 100C-A
Recommended Use: Power measurements, 0.19 - 10.6m.
Special Features: Very compact, conduction cooled.
SH version without amplifier has 1.5 meter cable and smart head connector compatible with all
Ophir smart displays
A version has twisted pair output connecting to separate amplifier circuit board.
Average Power:
Sensitivity:
0.04, 0.1, 0.4 and 1.0V/W standard for 100C-A with built-in amplifier
1.2s
Dimensions:
Absorber:
Cooling:
Calibration:
SH version calibrated for visible (V), CO2 (C) and YAG 1.064m (Y)
A version is calibrated at customer selected wavelength.
Ordering Information:
Note:
With A version, maximum power is also limited by maximum output voltage as follows:
Sensitivity:
0.04V/W
0.1V/W
0.4V/W
1V/W
Max power:
100W
60W
15W
6W
100C-SH
100C-A
47.6
6.3
MAX HEIGHT~15
14.5
18
5.5
48
6.3
6.3
6.3
MOUNTING HOLES
(2x) 3.3
34.9
34.9
(4x)
3.2
MOUNTING HOLES
CHOICE OF MOLEX CONNECTOR
OR TERMINALS FOR HARD WIRING.
118
Laser Power
& Energy
150 watts
Heads
Average Power:
Maximum Average Power Density:
Sensitivity:
0.04, 0.1, 0.4 and 1.0V/W standard for A version with built-in amplifier
1.2 s
Dimensions:
Absorber:
Cooling:
C version conduction, W version water. Water flow rate 0.5 liters per minute, minimum
Calibration:
SH version calibrated for visible (V), CO2 (C) and YAG 1.064m (Y)
A version is calibrated at customer selected wavelength.
Ordering Information:
Displays
Note:
With A version, maximum power is also limited by maximum output voltage as follows:
0.04V/W
0.1V/W
0.4V/W
1V/w
Max power:
150W
60W
15W
6W
150C-SH
150C-A/150W-A
14.5
19
18
TOP
MOUNTING HOLES
18
42
34
11
MOUNTING HOLES
(4x) M4x8 deep
MOLEX
22-01-2045
FRONT VIEW
SIDE-VIEW
REAR-VIEW
9.5
38
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
119
OEM Products
50.8
38
50
33
Integrated Systems
Beam Profile
Wavelength
Sensitivity:
L150C-A, L250W-A
Recommended Use: Power measurements, 0.19 - 10.6m.
Special Features:Very large aperture, high power, conduction cooled.
SH version without amplifier has 1.5 meter cable and smart head connector compatible with all
Ophir smart displays
A version has built-in amplifier
250 watts if water cooled (L250W-A)
Average Power:
Sensitivity:
0.04, 0.1, 0.4 and 1.0V/W standard for A version with built-in amplifier
2.5 s
Dimensions:
Absorber:
Cooling:
Calibration:
Ordering Information:
Note:
With A version, maximum power is also limited by maximum output voltage as follows:
Sensitivity:
0.04V/W
0.1V/W
0.4V/W
Max power:
250W
60W
15W
62
50
58
80
22.5
30
33.5
60
80
20
MOLEX 6471
80
FRONT VIEW
22.5
45
50
SIDE-VIEW
CONNECTOR
45
REAR-VIEW
L150C-A
L250W-A
Ordering Information
Item
Description
Ophir P/N
20C-SH
1Z02602
L30C-SH
173434
100C-SH
1Z02680
150C-SH
17023
150W-SH
171001
OEM heads defined by head type - sensitivity - calibration wavelength. For example:
Consult Ophir
150C-A-.04-Y means type 150C-A with sensitivity 0.04V/W calibrated for YAG 1064nm
representative
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
120
60
Beam Profile
Wavelength
Displays
Heads
Laser Power
& Energy
Output from Ophir pyroelectric OEM head with built-in signal conditioning
Note that the energy is now proportional to the output voltage and since the voltage is held for a fixed time, the
output is much less dependent on pulse rate or duration.
In the above example, the user need not perform any signal conditioning but simply has to read the voltage level
to determine the energy.
NIST, ISO, IEC, ANSI, NCSL, MIL-STD by www.raeservices.com
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
121
OEM Products
Note that energy is proportional to DV and not to the voltage above the zero level. Note also that the peak rapidly
decays and therefore the output depends on pulse rate and duration. It follows therefore that in order to measure
pyroelectric pulses, we must know the voltage level before the pulse and must also compensate for pulse rate (or
work at a low enough pulse rate for the correction to be rendered negligible).
Integrated Systems
Ophir low profile pyroelectric head output for repetitively pulsing laser
Recommended Use: For a complete self-contained OEM solution with calibrated square pulse output.
Special Features: Compact, relatively low cost, high rep rates, long pulses and high duty cycles possible.
Spectral Response:
3ms
10J to 0.1mJ
50W
100J/cm
Damage Threshold:
<100ns
1.5J/cm
1s
3J/cm
300s
Output:
Output Hold:
Hold time is adjustable between 100 and 500ms by trimpot on rear of head. (Factory set to 100ms.)
Accuracy of hold time is 20%. Maximum hold time limited to 50% duty cycle. At end of hold time,
voltage drops to below 0.2V.
24mm
Aperture:
Dimensions:
Calibration Accuracy:
3% at specified wavelength
Frequency Dependence:
Calibration Adjustment:
Cooling:
convection
Connections:
Output
Pin3
+6 to +12V input b
Pin 4
-6 to 12V input
Pin 5
Ground
Notes:
a. XX denotes the calibration wavelength in mm and the YYY denotes the calibrated sensitivity in V/J.
b. Output voltage is limited to 1 volt less than input V+. For example if input voltage is +6V, then maximum pulse energy is limited
to 6.25J = output of 5V.
28
3.8
43
4
24
50.8
47.8
30o
PE25-A-DIF
122
Laser Power
& Energy
Heads
14
12
50.8
30o
PE10-S
Features
Coating
Metallic
Spectral range
0.19 3m
Effective aperture
12mm
100V/J
100nJ
400Hz a
25s a
2W
Size
50.8 x 14mm
Pulse width
BNC
Damage threshold
<100ns
0.1J/cm
1s
0.2J/cm
300s
4J/cm
Output
Damage threshold
Note:
a. There is a trade-off between repetition rate, sensitivity and maximum pulse width. If the standard products are not suitable, these parameters
OEM Products
Beam Profile
Wavelength
75
Integrated Systems
100
Displays
ADJUSTABLE
95-145
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
123
PE10-S-Q
(2x) 5.7
MOUNTING HOLES
(2x) 3
30
(2x) 3.2
40
32
14
PE10-S-Q
Features
Very compact
Coating
Metallic
Spectral range
0.19 3m
Effective aperture
12mm
15V/J
100Hz a
500s a
100nJ
2W
Size
Rectangular
30mm W
40mm H
15mm
Pulse width
BNC
Damage threshold
<100ns
0.1J/cm
1s
0.2J/cm
300s
4J/cm
Output
Damage threshold
Note:
a. There is a trade-off between repetition rate, sensitivity and maximum pulse width. If the standard products are not suitable, these parameters
can be tailored to customer requirements.
124
PE25-S
24
14
Heads
50.8
30o
Laser Power
& Energy
ADJUSTABLE
95-145
Specifications
PE25-S
PE25BB-S
PE25BB-S-DIF
Features
General purpose
Spectrally flat
Coating
Metallic
Broadband
Broadband + diffuser
Spectral range
0.19 - 3m
0.19 - 20m
0.4-3m
Effective aperture
24x24mm
24x24mm
20mm
Sensitivity (approx.)
2JV/J at 2.9m
20Hz a
9V/J at 1064nm
40Hz a
300s a
5.5JV/J at 1064nm
20Hz a
1ms a
1ms a
5J
50J
150J
10W
10W
Size
Output
50.8 x14.5mm
BNC
Damage threshold
30W
50.8 x18.5mm
Pulse width
Metallic coating
Broadband coating
Diffuser head
<100ns
0.1J/cm
0.3J/cm
3J/cm
1s
0.21J/cm
0.3J/cm
3J/cm
300s
4J/cm
1J/cm
20J/cm
Note:
a. There is a trade-off between repetition rate, sensitivity and maximum pulse width. If the standard products are not suitable, these parameters
OEM Products
Beam Profile
Wavelength
PE25-S
Displays
75
Integrated Systems
100
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
125
PE50-S, PE50-BB-S
14
46
75
60o
ADJUSTABLE
108-157
100
75
PE50-S
Specifications
PE50-S
PE50BB-S
Features
Large aperture
Coating
Metallic
Broadband
Spectral range
0.19 - 3m
0.19 - 20m
Effective aperture
46mm
46mm
2.5V/J
10Hz a
1.8V/J
10Hz a
800s
2ms a
20J
0.5mJ
20W
15W
Size
Output
75 x 14.5mm
BNC
Damage threshold
Pulse width
Metallic coating
Broadband coating
<100ns
0.1J/cm
0.3J/cm
1s
0.21J/cm
0.3J/cm
300s
4J/cm
1J/cm
Note:
a. There is a trade-off between repetition rate, sensitivity and maximum pulse width. If the standard products are not suitable, these parameters
can be tailored to customer requirements.
Ordering Information
Item
Description
Ophir P/N
PE10-S
Slim profile pyro energy meter w/o electronics, 12mm aperture, 100V/J
1Z02802
PE10-S-Q
1Z02810
PE25-S
1Z02244
PE25BB-S
1Z02244B
PE25BB-S-DIF
1Z02804
PE50-S
1702245
PE50BB-S
1Z02245B
126
In addition to the standard OEM products described above, Ophir has accumulated over 25 years experience in
Laser Power
& Energy
developing products which are tailored to precise physical configurations provided by the OEM customer. These
products include special antireflection coatings for specific wavelengths, special display software options, and
Moving LED
Indicator
OPHIR OPTRONICS, INC. e-mail: sales @ ophiropt.com See our website at: http://www.ophiropt.com
127
Displays
Pyroelectric head
with antireflection
coating for almost
100% absorption
at 2.1m.
Beam Profile
Wavelength
Integrated Systems
Special AR
coating for
pyroelectric
head
OEM Products
Heads
much more. A number of these special OEM products are shown below.
GO/NO GO Software
When this specially programmed head is
plugged into the Nova display, energy
measurement is in the form of GO/NO GO. If
the measured energy is in the correct range,
the screen shows GO; if it is too low, the screen
shows NO GO; if even lower it will show CALL
SERVICE.
Using a password, the service tech can access
a special screen to set up measurement limits
or to define the head as a regular energy head.
Joules/cm Display
With this display, the Nova measures energy
density. The user selects the beam diameter by
pressing SIZE and the unit then displays the
energy density in units of J/cm2
128