Académique Documents
Professionnel Documents
Culture Documents
Page 1 of 2
Slovak | English
STEEL TUBES
CATEGORIES
APPLICATIONS
OF STEEL TUBES
CERTIFICATES
AND APPROVALS
TUBE
SIZE
DIMENSIONS OF TUBES
DIMENSIONS OF TUBES
LIST OF TECHNICAL
DELIVERY CONDITION
LIST OF DIMENSIONAL
STANDARDS
HELP
FOR TUBE USER
TECHNICAL
INFORMATION
Follow
STEEL
GRADE
107
HEAT TREATMENT OF
TUBES AND PIPES
S
P
L
E
CONTACT
PACKAGING OF TUBES
TESTING OF TUBES
According to EN 10027-1 standard steel markings are divided into two main groups:
TECHNICAL DELIVERY
CONDIT. FOR TUBES
TEST
DESCRIPTION
B
Y
R
H
D
T
M
MEDIA
AND CATALOGUES
admin@zelpo.sk
+ 421 48 6451111
Show all contacts
and GPS
E-mail newsletter
@
Partner sites
Research - Development centre
eleziarne Podbrezov a.s.
P Group - companies
Company newspapers - Slovak
http://www.steeltube.sk/Steel_for_tubes_and_pipelines
16-Mar-2015
Page 2 of 2
L - low Temperature
N - normalized or formed
1, 2 - quality group
TR1 steels for tubes for transporting media
TR2 steels for tubes for pressure equipment and pipelines (PED, AD 2000 Merkblatt)
G - general characteristics, notice for the second character
L - steel for pipeline tubes
L - steels for pipeline tubes
(e.g. L210GA, L245NB)
210 - minimum yield strength in N/mm2
G - General, general characteristics, a letter for notice of the following significance in
the second character
A - grade requirements for pipeline tubes
N - steel normalized or formed
Q heat treated steel
M - steel, thermomechanically rolled
B - grade requirements for pipeline tubes(napr. L210GA, L245NB)
Group 2 - steels marked according to chemical composition (4 subgroups)
Non-alloy steel
(with the exception of free-cutting steel)
letter C and the number corresponding to 100 times the mean range value specified for
the content of carbon (C22)
Non-alloy steel
containing Mn> 1% and alloy steels content of individual alloying elements below
5%
a) number corresponding to 100 times the carbon content
b) chemical symbols of alloying elements in order of decreasing content of elements
c) numbers are set up by the alloying elements content (25CrMo4)
Alloy steels containing min. of one element over 5%
a) characteristic letter X (X11CrMo9-1)
b) number - 100-times the mean of carbon content
c) the chemical symbols of alloying elements
d) numbers which are set up according to the alloying elements content
High speed cutting steel marking
a) characteristic letters HS (HS 6-5-2)
b) numbers which are set up by the alloying elements content
The EN ECISS IC10 Standard provides additional symbols for steels (Groups 1 and 2).
These symbols are placed at the end of the mark of the steel (S 275 J0).
In addition, symbols are added to steel products. These are separated from the
previous symbols by a plus sign (S 275 J0+A).
Symbols for steel tubes
G - other characteristics (depending upon the need 1 or 2 digits)
H - hollow profile if necessary steel for higher temperatures according to the type of
steel (S, P)
L - steel for low temperature
R - steel for standard temperature (ambient temperature)
M - thermomechanically rolled
N - normalized or normalized rolled
Q heat treated
T - steel for tubes
EN 10027-2 contains the system of numerical marking.
The first number is 1 - steel, followed by two digits steel group and of the serial number
of steel.
Carbon equivalent
Based on the agreement maximum value of carbon equivalent (CEV) as a measure of
the weldability of steel according to the formula may be set up:
CEQ = C + Mn /6 + (Cr + Mo + V)/5 + (Ni + Cu)/15
Copyright eleziarne Podbrezov a.s. 2011, all rights reserved Accessibility proclamation
http://www.steeltube.sk/Steel_for_tubes_and_pipelines
16-Mar-2015