Académique Documents
Professionnel Documents
Culture Documents
WhatIsaFlameDetector?
wiseGEEK
Feedback
About wiseGEEK
Category: Industry
A flame detector is a type of device that uses optical sensors in order to detect flames. Flame
detectors are used mostly at hydrogen stations in order to prevent any fires from happening.
Essentially, there are seven different types of flame detectors available. These types include
ultraviolet, infrared, UV/IR, IR/IR, IR/IR/IR, visible sensors and video cameras.
Flame Detector
Thermal Detector
Heat Detector
Fire Detector
Flame Detection
Infrared Photodiode
Ultraviolet detectors have the ability to detect fires and explosions in three to four milliseconds.
From the moment that a small flame has been ignited, an ultraviolet detector can distinguish the
type of flame. While incredibly accurate, ultraviolet detectors can be fooled by sunlight,
radiation, arc welding, and lightning.
On This Page
An infrared flame detector works by using an infrared band. When hot gasses are released near
an infrared detector, a small thermal imaging camera immediately picks up on the presence of
these gasses. On occasion, other sources of hot gas that happen to be near an infrared flame
detector can cause this type of detector to set off a false alarm.
UV/IR detectors use a combination of both ultraviolet and infrared technology to detect heat.
These detectors gather information from an ultraviolet perspective and an infrared perspective.
When these two technologies work together, false alarms are often minimized. Similarly, an
IR/IR flame detector detects flames within two infrared frequencies. Thus, IR/IR detectors are
also able to eliminate most false alarms.
Ad
AccessBlockedContentAlert
TheURL:http://googleads.g.doubleclick.net/pagead/ads?
client=capub
8290526608142878&format=545x200&output=html&h=200&
wasblocked
ThelinkyouareaccessinghasbeenblockedbytheBarra
WebFilterbecauseitmatchesablockedcategory.
ofthecategoryis:"advertisementspopups"
Even more accurate than IR/IR or UV/IR detectors are IR/IR/IR detectors that use three different
infrared frequencies in order to detect a flame. Since an IR/IR/IR detector works by comparing
three wavelength bands, it is nearly impossible for this type of flame detector to detect anything
other than a dangerous flame or fire. Frequently, visible sensors are added to a flame detector
in order to detect any flames that may be visible. When combined with a highly accurate
detector, a visible sensor tends to eliminate any type of false alarm.
wiseGEEK
Like
267,575peoplelikewiseGEEK.
Lastly, a closed circuit video camera may be able to detect any flame or fire. However, as is the
case with any other kind of camera, these cameras can be triggered by any kind of smoke or fog,
which makes this type of flame detector the least reliable. While all kinds of flame detectors are
used in industrial settings, such as hydrogen stations, residential fire alarms are also considered
flame detectors. Without these devices, fires would not be detected, which could lead to a
massive explosion, fire, or other incident.
Facebooksocialplugin
Follow@wiseGEEK
Ad
TheURL:http://googleads.g.doubleclick.net/pagead/ads?
client=capub
8290526608142878&format=545x200&output=html&h=200&
wasblocked
13.3Kfollowers
Article Details
Written By: Harriette Halepis
Edited By: Bronwyn Harris
Last Modified Date: 22 March 2015
Copyright Protected:
2003-2015 Conjecture Corporation
Print this Article
AccessBlockedContentAlert
ThelinkyouareaccessinghasbeenblockedbytheBarra
WebFilterbecauseitmatchesablockedcategory.
ofthecategoryis:"advertisementspopups"
Recommended
http://www.wisegeek.com/whatisaflamedetector.htm
1/4
3/23/2015
WhatIsaFlameDetector?
AccessBlockedContentAlert
ThisDayinHistory
March23,1839:Theword"OK"gained
nationalremore...
getwidget
TheURL:http://googleads.g.doubleclick.net/pagead/ads?client=ca
pub
8290526608142878&format=564x300&output=html&h=300&slotname=7477930554&adk=350
isaflamedetector.htm&dt=142709879wasblocked
ThelinkyouareaccessinghasbeenblockedbytheBarracuda
WebFilterbecauseitmatchesablockedcategory.Thenameof
thecategoryis:"advertisementspopups"
Subscribe to wiseGEEK
Learn something new every day
by email
More Info...
Ifyoubelievethisisanerrororneedtoaccessthislinkplease
contactyouradministrator.
wiseGEEK Slideshows
3 Questions to
Make Any Girl
Chase You
Controversial
"Skinny Pill"
Sweeps the Nation
New Diabetes
Breakthrough?
7 Hidden Signs of
Alzheimer's
Social Security:
How To Get $1,000
More a Month
Sponsored ?
(Florence)
Statue of Liberty
(New York City)
Ad
http://www.wisegeek.com/whatisaflamedetector.htm
2/4
3/23/2015
WhatIsaFlameDetector?
AccessBlockedContentAlert
TheURL:http://googleads.g.doubleclick.net/pagead/ads?
client=capub
8290526608142878&format=545x200&output=html&h=200&a
wasblocked
ThelinkyouareaccessinghasbeenblockedbytheBarrac
WebFilterbecauseitmatchesablockedcategory.Thenam
ofthecategoryis:"advertisementspopups"
Discuss this Article
MrMoody
Post 4
miriam98
Post 3
@everetra - I notice that in order to eliminate false alarms, the best flame detectors
use smart technology.
The article mentions the IR/IR/IR flame detectors as being the most accurate
because they compare the different wavelengths of light to determine if a
dangerous flame has in fact been lit.
Thats why I call it smart technology, because it requires comparing different values.
I wonder if these kinds of detectors have any computerized circuitry, and if not,
would the insertion of computer technology make these or other detectors even
more accurate?
everetra
Post 2
@allenJo - Yes, by I think that the flame detector is more accurate. Remember, the
fire detector doesnt just detect the fires; it also detects the nearby gases.
Any flame that is ignited is bound to release gases into the atmosphere. I think
smoke detectors work on gas smells as well so I think the principle between the two
is similar.
Also remember that before there is smoke, there is a flame, so I think that the flame
detector is the more accurate technology. It nips the problem in the bud, at the very
instant that it happens.
Related Flame Detector Thermal Detector Heat Detector Fire Detector Flame Detection
Topics
allenJo
Post 1
My first impression is that a flame detector works differently than a smoke detector,
if I understand correctly.
All of the different detectors that are described in this article rely on gases or
flames, and the detectors use the light spectrum to detect them.
What if you have smoke without any visible flames? I think a smoke detector works
differently, as it detects mainly the smoke.
Ive had my smoke detector go off when something burned but there were no
longer any flames and so I think the technology is different.
Login
http://www.wisegeek.com/whatisaflamedetector.htm
Register
3/4
3/23/2015
WhatIsaFlameDetector?
username
username
password
password
confirm
forgot password?
wiseGEEK
http://www.wisegeek.com/whatisaflamedetector.htm
FAQ
Login
Contact Us
Privacy Policy
Terms and Conditions
Copyright 2003 - 2015
Conjecture Corporation
4/4