Académique Documents
Professionnel Documents
Culture Documents
workshop
living
food
play
outside
Car datta logger Using OBD II protocol (atmega 2560+ SD card + lcd 16x2)
by JohanpG on July 24, 2014
Table of Contents
Car datta logger Using OBD II protocol (atmega 2560+ SD card + lcd 16x2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Intro: Car datta logger Using OBD II protocol (atmega 2560+ SD card + lcd 16x2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
http://www.instructables.com/id/Car-datta-logger-Using-OBD-II-protocol-atmega-2560/
Author:JohanpG My blog
Just an engineering student, i play guitar. I like music and technology . So wait my instructables :D
Intro: Car datta logger Using OBD II protocol (atmega 2560+ SD card + lcd 16x2)
Ok first of all this was a final project for my microprocessor course in my University, and its intended to clarify and guide to someone has a similar project or just want to
do it and learn , since when i was doing this project it wasn't so easy to find the information and examples to do it i think this could be helpful to someones out there.First i
will explained how is the system going to work, this embedded system has three main components which satisfy three main functions or services, the first part is the
communication part.
http://www.instructables.com/id/Car-datta-logger-Using-OBD-II-protocol-atmega-2560/
Image Notes
1. Two wires are solder to the 17 and 16 pins on the PIC controller
http://www.instructables.com/id/Car-datta-logger-Using-OBD-II-protocol-atmega-2560/
http://www.instructables.com/id/Car-datta-logger-Using-OBD-II-protocol-atmega-2560/
Related Instructables
Music Playing
Alarm Clock by
frank26080115
Cheap AVR/51
Development
board by Silvius
My Second
Project: Arduino
2.4" TFT by
Rookie P
Programming
ATmega16A
using arduino
IDE by ekhiw
Speaking clock
with AVR by
arick
DIY- G-force
measurement
system by Aj
Creations
Advertisements
Comments
10 comments Add Comment
fernando.novais.37 says:
hello
You could get the code to SD card, I'm also trying to use the SD card on a atmega 2560 and I'm not getting
thank you
JohanpG says:
Hello ! The code to store in the SD card is already include in the project in the .rar
It uses the sdmmc , ff , ffconf ,integer libraries , so all the necesesary files are supossed to be there already.
Good luck
fernando.novais.37 says:
hello,
I could not find the files on the SD card the only ones who are files in rar file are these:(see image)
If you could explain to me where they are grateful.
thank you
JohanpG says:
fernando.novais.37 says:
hello
You could get the code to SD card, I'm also trying to use the SD card on a atmega 2560 and I'm not getting
thank you
http://www.instructables.com/id/Car-datta-logger-Using-OBD-II-protocol-atmega-2560/
aastudillo says:
Raphango says:
Congratulations!
Great project!
JohanpG says:
Thank you !
kag432 says:
JohanpG says:
Thank you !
http://www.instructables.com/id/Car-datta-logger-Using-OBD-II-protocol-atmega-2560/