Académique Documents
Professionnel Documents
Culture Documents
Equipment
ITEM 01 - 01 un - Ref.: VMR-70 - RITZGLAS sectional stick, 5.200mm overall length, including:
01 un - Ref.: VMR-S - End element 32 / 1.250mm, with CS-U universal head.
02 un - Ref.: VMR-I - Intermediary element, 38 / 1.250mm.
01 un - Ref.: VMR-P - Base element, 38 / 1.450mm
ITEM 02 - 01 un - Ref.: VMR00884-1 - Head for switch operation.
ITEM 03 - 01 un - Ref.: VMR02579-1 - Intermediary head for grounding clamp installation.
ITEM 04 - 03 un - Ref.: RG3368 - Bus bar grounding clamp.
ITEM 05 - 03 un - Ref.: RG3363-1 - Clamp for contact with ground.
ITEM 06 - 03 un -Ref.: CTC-70 - Extra flexible 70mm copper cable, with crystal clear insulation, 10
meters length each.
ITEM 07 - 01un - Ref.: SE/SE - Canvas bag
NOTE: The components of the set above support a specific substation pattern and there are cases which the
cable length and/or diameter must be changed, as well as the grounding clamps, depending on the heights of the
structures, short circuit currents or the diameter/width of the bus bars.To define the proper cables and clamps,
refer to other sections of the present catalog.
VMR16483-1
VMR08974-1
VMR01479-2
VMR11560-1
L
VMR21120-1
335
TEREX
OPERATIONAL HEADS
Heads for Grounding Clamps
The heads for grounding clamps are made of aluminum and are provided
with universal coupling systems, adaptable to the hot sticks. They are used
when operating the grounding clamps, by locking it with the eye-screw.
- VMR02579-1
VMR02579-1
VMR07205-1
- RM4455-29B
Locking and release of the clamp is performed by a twisting operation. It
allows the articulation of the clamp, enabling the operation at different
angles.
RM4455-29B
FLV11554-1
Main body made of hot galvanized steel, featuring bronze alloy safety lock
and universal head.
Approx. Weight: 0.34 kg (0.75 lb)
- FLV13872-1
Main body made of plastic coated steel, featuring safety lock and bronze
alloy universal head.
TEREX
334