Académique Documents
Professionnel Documents
Culture Documents
Contents
Introduction .................................................................................................................. 3
Fields of Application ...................................................................................................... 4
Main Advantages ........................................................................................................... 4
System Description ...................................................................................................... 4
System Components .................................................................................................... 4
Specifications ............................................................................................................... 5
Technical Features ......................................................................................................... 6
Accessories .................................................................................................................. 6
Order Information .......................................................................................................... 7
Introduction
GRP Anchors and Rock Bolts are used
as an alternative to conventional ground
control elements made of steel. Thanks
to the rapid development of production
technologies and a higher amount of
mechanical excavation, GRP systems
have gained importance in underground
construction around the world.
Fields of application of GRP Anchors and
Rock Bolts range from cuttable rock bolts
for underground coal Mining or ground
control for mechanical excavations to
injection lances or forepoling.
DYWIDAG-Systems International
provides a diversified portfolio of
GRP systems for various applications in
Mining, Tunneling, and Civil Engineering
which is completed by longtime experience
in the production and application of
GRP Anchors and Rock Bolts.
Fields of Application
Main Advantages
System Description
Forepoling element
System Components
Type CS
Fully threaded solid GRP bar
GRP plate
GRP nut
Type CH
Fully threaded hollow bar
GRP plate
GRP nut
Type CR
Single-use drill bit different designs
and dimensions available
Fully threaded self-drilling hollow bar
GRP plate
GRP nut
Specifications
GRP Bars Type CS, CH, and CR
No. Characteristic value / type1)
1
Nominal diameter
2
Nominal cross-section 2)
3
Nominal weight 2)
4
Ultimate load bar 3)
5
Ultimate strength bar 4)
6
Elongation bar 5)
7
Shear force bar 5)
8
Ultimate load bar-nut 6)
9 Ultimate load bar-coupling 6)
10
Delivery lengths 7)
11
Color code bar
Symbol
Da,nom
S0
m
Fm.s.nom
Rm.s.nom
Agt
FS.nom
Fm.n.nom
Fm.c.nom
L
Unit
[mm]
[mm2]
[kg/m]
[kN]
[N/mm2]
[%]
[kN]
[kN]
[kN]
[m]
CS20-190
20
186
0.56
190
1,000
2.5
90
1.0 - 6.0
Black
CS25-350
25
346
0.90
350
1,000
2.5
160
1.0 - 6.0
Black
CS32-560
32
580
1.30
560
960
2.5
230
130
160
1.0 - 6.0
Black
CH25-250
25
230
0.64
250
1,000
2.5
110
1.0 - 6.0
Green
CH32-350
32
340
0.95
350
1,000
2.5
140
130
160
1.0 - 6.0
Green
CR32-340
32
340
0.95
350
1,000
2.5
140
130
160
1.0 - 6.0
Red
CH32-350
46
100
0.15
CR32-340
46
100
0.15
1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request;
corresponding plates according to manufacturer specifications
2) Characteristic fractile value
3) Calculated from the characteristic ultimate strength value and nominal weight, rounded
4) Modulus of elasticity: 40,000 [N/mm]
5) According to manufacturer specifications
6) Nominal value ultimate system load: bar or hollow bar and steel nut or DYWI Drill steel coupling R32 (standard versions)
7) Standard lengths max. 6 [m], customized length up to 11 [m] available on request
Symbol
SW
LM
GM
DP
HP
GP
Unit
[mm]
[mm]
[kg]
[]
[mm]
[mm]
[kg]
[]
CS20-190
36
70
0.08
CS25-350
41
80
0.11
CS32-560
46
100
0.15
CH25-250
41
80
0.11
140
34
0.36
170
46
0.54
170
46
0.54
170
46
0.54
170
46
0.54
170
46
0.54
1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request;
corresponding plates according to manufacturer specifications
Symbol
Da.nom
m
Fm.s.nom
Rm.s.nom
Agt
Fm.a.nom
Unit
[mm]
[kg/m]
[kN]
[N/mm]
[%]
[kN]
MNR-200
16
0.39
200
1,000
90
MNR-250 MNR-280
19
20
0.55
0.64
250
280
900
900
>4
100
110
MNR-440
25
0.98
440
900
MNF-280
40 x 7
0.55
280
1,000
120
100
MNF-320
40 x 8
0.63
320
1,000
>2
110
MNF-360
40 x 9
0.70
360
1,000
120
1) Status: 2012-08, note: all values are subject to change; other designs and dimensions available on request;
corresponding plates according to manufacturer specifications
2) Characteristic fractile value
3) Modulus of elasticity: 40,000 [N/mm]
4) According to manufacturer specifications
Technical Features
Drill Bits
The success of the installation depends
on the selection of the proper drill bit
Article No.
Description
Article Code
Design
Thread
Diameter
[mm] 1)
51
76
CB-Thread-D-HD
R32
R32
BB-Thread-D-HD
R32
301080221XXX
R32
301080411XXX
R32
301080511XXX
R32
301080811XXX
Arc-shaped button
drill bit,
AB-Thread-D-HD
hardened
R32
301080521XXX
Arc-shaped button
drill bit,
AB-Thread-D-HM
with carbide inserts
R32
301080111XXX
301080121XXX
301080211XXX
Accessories
Steel accessories available on request
GRP rebars
Fully threaded solid GRP bar
Threading according to the demands
for concrete reinforcing elements
Connectors depending on the
application
Reinforcing cages available on request
1) X-marked fields indicate standard drill bit types; other dimensions available on request
GRP Mesh
Characteristic value / type 1)
Nominal diameter
Nominal cross-section 2)
Nominal weight 2)
Ultimate load bar 3)
Ultimate strength bar 4)
Elongation bar 5)
Shear force bar 5)
Symbol
Da.nom
S0
m
Fm.s.nom
Rm.s.nom
Agt
FS.nom
Unit
[mm]
[mm2]
[kg/m]
[kN]
[N/mm2]
[%]
[%]
CS15-130
15
180
0.36
130
1,000
2.5
60
CR20-250
20
320
0.65
250
1,000
2.5
120
1) Status: 2012-08, note: all values are subject to change; other designs and dimensions
available on request
2) Characteristic fractile value
3) Calculated from the characteristic ultimate strength value and nominal weight, rounded
4) Modulus of elasticity: 40,000 [N/mm]
5) According to manufacturer specifications
Order Information 1)
Article Description 2)
DYWIDAG GRP Solid Bar
CS20-190, L = X,X00 [mm]
DYWIDAG GRP Solid Bar
Nut CS20
DYWIDAG GRP Solid Bar
Plate CS20, d. 140 [mm]
DYWIDAG GRP Solid Bar
CS25-350, L = X,X00 [mm]
DYWIDAG GRP Solid Bar
Nut CS25
DYWIDAG GRP Solid Bar
Plate CS25, d. 170 [mm]
DYWIDAG GRP Solid Bar
CS32-560, L = X,X00 [mm]
DYWIDAG GRP Solid Bar
Nut CS32
DYWIDAG GRP Solid Bar
Plate CS32, d. 170 [mm]
DYWIDAG GRP Hollow Bar
CH25-250, L = X,X00 [mm]
DYWIDAG GRP Hollow Bar
Nut CH25
DYWIDAG GRP Hollow Bar
Plate CH25, d. 170 [mm]
DYWIDAG GRP Hollow Bar
CH32-350, L = X,X00 [mm]
DYWIDAG GRP Hollow Bar
Nut CH32
DYWIDAG GRP Hollow Bar
Plate CH32, d. 170 [mm]
DYWIDAG GRP S-D Hollow Bar
CR32-340, L = X,X00 [mm]
DYWIDAG GRP S-D Hollow Bar
Nut CR32
DYWIDAG GRP S-D Hollow Bar
Steel Nut CR32-S
DYWIDAG GRP S-D Hollow Bar
Plate CR32, d. 170 [mm]
Article No.
2060101910XX
206020051036
206040021014
2061103510XX
206120051041
206140021017
2062105610XX
206220051046
206240021017
2064102510XX
206420051041
206440021017
2065103510XX
206520051046
206540021017
2067103410XX
206720051046
206720022046
206740021017
Austria
EMEA
DYWIDAG-Systems International GmbH
Alfred-Wagner-Strasse 1
4061 Pasching/Linz, Austria
Phone +43-7229-610 49 0
Fax
+43-7229-610 49 80
E-mail alwag@dywidag-systems.at
www.alwag.com
Argentina
Australia
belgium
Canada
North America
DSI Underground Systems Inc.
9786 S Prosperity Road
West Jordan, UT 84081, USA
Phone +1-801-973 7169
Fax
+1-801-973 7172
E-mail dsiunderground@dsiunderground.com
www.dsiunderground.com
Chile
Colombia
C o s t a R i ca
C r o at i a
Czech republic
Denmark
South America
DSI Chile Industrial Ltda.
Las Encinas #1387, Valle Grande
Lampa, Santiago de Chile, Chile
Phone +56-2-596 96 20
Fax
+56-2-596 96 69
E-mail informaciones@dywidag-systems.cl
www.dsi-chile.com
Egypt
estonia
Finland
France
Germany
Greece
APAC/ASEAN
DYWIDAG-Systems International Pty. Ltd.
25 Pacific Highway
Bennetts Green, NSW 2290, Australia
Phone +61-2-49 48 90 99
Fax
+61-2-49 48 99 56
E-mail dsi@dywidag.com.au
www.dsiminingproducts.com/au
GU A TEM A L A
HONDUR A S
Hong Kong
Indonesia
I ta ly
J a pa n
Korea
Lebanon
Luxembourg
Ma l a y s i a
Mexico
Netherlands
N o r way
Oman
Pa n a m a
Pa r a g u a y
Peru
POL A ND
Portugal
Q ata r
Sa u d i A r a b i a
singapore
S o u t h A f r i ca
S pa i n
Sweden
Switzerland
Ta i w a n
Thailand
Turkey
United kingdom
U r u g u ay
US A
Venezuela
04346-1/02.13-web he
Please note:
This brochure serves basic information
purposes only. Technical data and information
provided herein shall be considered
non-binding and may be subject to change
without notice. We do not assume any liability
for losses or damages attributed to the use
of this technical data and any improper
use of our products. Should you require
further information on particular products,
please do not hesitate to contact us.
U n i t e d A r a b E m i r at e s