Académique Documents
Professionnel Documents
Culture Documents
Folder
Sample &
Buy
Support &
Community
Tools &
Software
Technical
Documents
3 Description
3-Terminal Regulators
Available in fixed 5-V/8-V/10-V/12-V/15-V/24-V
options
Output Current up to 1.5 A
Internal Thermal-Overload Protection
High Power-Dissipation Capability
Internal Short-Circuit Current Limiting
Output Transistor Safe-Area Compensation
Output Capacitor Not Needed for Stability
2 Applications
On-card Regulation
Portable Devices
Computing & Servers
Telecommunications
Device Information(1)
PART NUMBER
A78xx
PACKAGE
TO-220 (3)
10.16 mm x 8.82 mm
TO-220 (3)
10.16 mm x 8.82 mm
TO-263 (3)
10.06 mm x 9.02 mm
4 Simplified Schematic
+V
0.33 F
A78xx
+VO
0.1 F
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
www.ti.com
Table of Contents
1
2
3
4
5
6
7
Features ..................................................................
Applications ...........................................................
Description .............................................................
Simplified Schematic.............................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
7.10
7.11
1
1
1
1
2
3
4
Overview .................................................................
Functional Schematic..............................................
Feature Description.................................................
Device Functional Modes........................................
11
11
11
11
15
15
15
15
5 Revision History
Changes from Revision O (August 2012) to Revision P
Page
Added Applications, Device Information table, Pin Functions table, ESD Ratings table, Thermal Information table,
Typical Characteristics, Feature Description section, Device Functional Modes, Application and Implementation
section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and
Mechanical, Packaging, and Orderable Information section. ................................................................................................. 1
E
ET
L
SO
OB
OUTPUT
COMMON
INPUT
COMMON
COMMON
KC (TO-220) PACKAGE
(TOP VIEW)
TM
OB
E
ET
L
SO
COMMON
COMMON
OUTPUT
COMMON
INPUT
OUTPUT
COMMON
INPUT
OUTPUT
COMMON
INPUT
Pin Functions
PIN
NAME
NO.
TYPE
DESCRIPTION
COMMON
INPUT
Ground
Supply Input
OUTPUT
Voltage Output
www.ti.com
7 Specifications
7.1 Absolute Maximum Ratings
over virtual junction temperature range (unless otherwise noted)
MIN
Vl
Input voltage
TJ
Tstg
MAX
A7824C
40
All others
35
65
UNIT
V
150
260
150
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins (1)
3000
2000
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
Vl
Input voltage
IO
Output current
TJ
MIN
MAX
A7805
25
A7808
10.5
25
A7810
12.5
28
A7812
14.5
30
A7815
17.5
30
A7824
27
UNIT
38
1.5
125
RJA
RJC(top)
RJP(top)
(1)
KTE
KCS, KCT,
KC
KTT
3 PINS
3 PINS
3 PINS
23
19
25.3
17
18
2.7
1.94
UNIT
C/W
For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report (SPRA953).
TEST CONDITIONS
IO = 5 mA to 1 A, VI = 7 V to 20 V,
PD 15 W
Output voltage
VI = 7 V to 25 V
VI = 8 V to 12 V
VI = 8 V to 12 V, f = 120 Hz
VI = 8 V to 12 V, f = 120 Hz (KCT)
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
TJ
A7805C
(1)
MIN
TYP
25C
4.8
0C to 125C
4.75
25C
0C to 125C
62
UNIT
MAX
5.2
5.25
3
100
50
mV
78
dB
68
25C
15
100
50
mV
Output resistance
f = 1 kHz
0C to 125C
0.017
IO = 5 mA
0C to 125C
1.1
mV/C
f = 10 Hz to 100 kHz
25C
40
Dropout voltage
IO = 1 A
25C
25C
4.2
Bias current
Bias current change
VI = 7 V to 25 V
IO = 5 mA to 1 A
V
V
8
1.3
0C to 125C
0.5
mA
mA
25C
750
mA
25C
2.2
(1)
(2)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across
the output.
This parameter is validated by design and verified during product characterization. It is not tested in production.
www.ti.com
TEST CONDITIONS
TJ
25C
IO = 5 mA to 1 A, VI = 10.5 V to 23 V,
PD 15 W
0C to 125C
Output voltage
VI = 10.5 V to 25 V
VI = 11 V to 17 V
VI = 11.5 V to 21.5 V, f = 120 Hz
(KCT)
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
MIN
TYP
MAX
7.7
8.3
7.6
25C
A7808C
(1)
55
0C to 125C
25C
8.4
6
160
80
UNIT
V
mV
72
dB
62
12
160
80
mV
Output resistance
f = 1 kHz
0C to 125C
0.016
IO = 5 mA
0C to 125C
0.8
mV/C
f = 10 Hz to 100 kHz
25C
52
Dropout voltage
IO = 1 A
25C
25C
4.3
Bias current
VI = 10.5 V to 25 V
IO = 5 mA to 1 A
8
1
0C to 125C
0.5
mA
mA
25C
450
mA
25C
2.2
(1)
(2)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across
the output.
This parameter is validated by design and verified during product characterization. It is not tested in production.
TEST CONDITIONS
TJ
25C
IO = 5 mA to 1 A, VI = 12.5 V to 25 V,
PD 15 W
0C to 125C
Output voltage
VI = 12.5 V to 28 V
VI = 14 V to 20 V
VI = 13 V to 23 V, f = 120 Hz
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
A7810C
(1)
MIN
TYP
MAX
9.6
10
10.4
9.5
25C
0C to 125C
55
25C
UNIT
V
10.5
7
200
100
mV
71
dB
12
200
100
mV
Output resistance
f = 1 kHz
0C to 125C
0.018
IO = 5 mA
0C to 125C
mV/C
f = 10 Hz to 100 kHz
25C
70
Dropout voltage
IO = 1 A
25C
25C
4.3
Bias current
Bias current change
VI = 12.5 V to 28 V
IO = 5 mA to 1 A
V
8
1
0C to 125C
0.5
mA
mA
25C
400
mA
25C
2.2
(1)
(2)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across
the output.
This parameter is validated by design and verified during product characterization. It is not tested in production.
www.ti.com
TEST CONDITIONS
TJ
25C
IO = 5 mA to 1 A, VI = 14.5 V to 27 V,
PD 15 W
0C to 125C
Output voltage
VI = 14.5 V to 30 V
VI = 16 V to 22 V
VI = 15 V to 25 V, f = 120 Hz
VI = 15 V to 25 V, f = 120 Hz (KCT)
IO = 5 mA to 1.5 A
IO = 250 mA to 750 mA
A7812C
(1)
MIN
TYP
MAX
11.5
12
12.5
11.4
25C
0C to 125C
55
25C
12.6
10
240
120
71
UNIT
V
mV
dB
61
12
240
120
mV
Output resistance
f = 1 kHz
0C to 125C
0.018
IO = 5 mA
0C to 125C
mV/C
f = 10 Hz to 100 kHz
25C
75
Dropout voltage
IO = 1 A
25C
25C
4.3
Bias current
VI = 14.5 V to 30 V
IO = 5 mA to 1 A
V
8
1
0C to 125C
0.5
mA
mA
25C
350
mA
25C
2.2
(1)
(2)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across
the output.
This parameter is validated by design and verified during product characterization. It is not tested in production.
TEST CONDITIONS
IO = 5 mA to 1 A, VI = 17.5 V to 30 V,
PD 15 W
Output voltage
VI = 17.5 V to 30 V
VI = 20 V to 26 V
TJ
A7815C
(1)
MIN
TYP
25C
14.4
15
0C to 125C
14.25
25C
IO = 250 mA to 750 mA
54
0C to 125C
25C
UNIT
MAX
15.6
15.75
11
300
150
mV
70
dB
60
12
300
150
mV
Output resistance
f = 1 kHz
0C to 125C
0.019
IO = 5 mA
0C to 125C
mV/C
f = 10 Hz to 100 kHz
25C
90
Dropout voltage
IO = 1 A
25C
25C
4.4
Bias current
Bias current change
VI = 17.5 V to 30 V
IO = 5 mA to 1 A
8
1
0C to 125C
0.5
mA
mA
25C
230
mA
25C
2.1
(1)
(2)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across
the output.
This parameter is validated by design and verified during product characterization. It is not tested in production.
www.ti.com
TEST CONDITIONS
IO = 5 mA to 1 A, VI = 27 V to 38 V,
PD 15 W
Output voltage
TJ
25C
0C to 125C
VI = 27 V to 38 V
VI = 28 V to 38 V, f = 120 Hz
0C to 125C
IO = 5 mA to 1.5 A
MIN
TYP
23
24
22.8
25C
VI = 30 V to 36 V
A7824C
(1)
50
25C
IO = 250 mA to 750 mA
MAX
25
25.2
18
480
240
66
UNIT
V
mV
dB
12
480
240
mV
Output resistance
f = 1 kHz
0C to 125C
0.028
IO = 5 mA
0C to 125C
1.5
mV/C
f = 10 Hz to 100 kHz
25C
170
Dropout voltage
IO = 1 A
25C
25C
4.6
Bias current
VI = 27 V to 38 V
0C to 125C
IO = 5 mA to 1 A
V
8
0.5
mA
mA
25C
150
mA
25C
2.1
(1)
(2)
Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be
taken into account separately. All characteristics are measured with a 0.33-F capacitor across the input and a 0.1-F capacitor across
the output.
This parameter is validated by design and verified during product characterization. It is not tested in production.
4.0
3.5
3.0
IBIAS
2.5
0
10
VIN - VOUT (typ)
15
20
C001
10
8 Detailed Description
8.1 Overview
This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications.
These applications include on-card regulation for elimination of noise and distribution problems associated with
single-point regulation. Each of these regulators can deliver up to 1.5 A of output current. The internal currentlimiting and thermal-shutdown features of these regulators essentially make them immune to overload. In
addition to use as fixed-voltage regulators, these devices can be used with external components to obtain
adjustable output voltages and currents, and also can be used as the power-pass element in precision
regulators.
OUTPUT
COMMON
11
www.ti.com
+VO
A78xx
0.33 F
0.1 F
+VO
A78xx
1N4001
or
Equivalent
VO
12
VI
+VO
A78xx
2.20
2.00
1.80
1.60
1.40
1.20
1.00
0.00
Voltage Loss
0.25
0.50
0.75
1.00
1.25
1.50
C001
OUT
VI
A78xx
IL
COM
VO
Input
Output
A78xx
IO
R1
0.1 F
0.33 F
R2
A:
The following formula is used when Vxx is the nominal output voltage (output to common) of the fixed regulators
VO = VXX + XX + IQ R2
R1
13
www.ti.com
Input
A78xx
R1
VO(Reg)
0.33 F
Output
IO
IO = (VO/R1) + IO Bias Current
20-V Input
VO = 15 V
A7815C
0.33 F
1 F
2 F
20-V Input
1N4001
0.1 F
0.1 F
1N4001
VO = 15 V
A7915C
1N4001
14
11 Layout
11.1 Layout Guidelines
Keep trace widths large enough to eliminate problematic IR voltage drops at the input and output terminals.
Input decoupling capacitors should be placed as close to the A78XX as possible.
OUTPUT
Ground
COMMON
INPUT
PF
PF
Ground
PRODUCT FOLDER
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
A7805
Click here
Click here
Click here
Click here
Click here
uA7808
Click here
Click here
Click here
Click here
Click here
uA7810
Click here
Click here
Click here
Click here
Click here
uA7812
Click here
Click here
Click here
Click here
Click here
uA7815
Click here
Click here
Click here
Click here
Click here
uA7924
Click here
Click here
Click here
Click here
Click here
12.2 Trademarks
12.3 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.4 Glossary
SLYZ022 TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
15
www.ti.com
12-Jan-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA7805CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7805C
UA7805CKCE3
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7805C
UA7805CKCS
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7805C
UA7805CKCSE3
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7805C
UA7805CKCT
ACTIVE
TO-220
KCT
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7805C
UA7805CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
0 to 125
UA7805C
UA7805CKTTR
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7805C
UA7805CKTTRG3
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7805C
UA7805QKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
-40 to 125
UA7805QKTE
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
-40 to 125
UA7808CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7808C
UA7808CKCE3
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7808C
UA7808CKCS
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7808C
UA7808CKCSE3
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7808C
UA7808CKCT
ACTIVE
TO-220
KCT
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7808C
UA7808CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
0 to 125
UA7808C
UA7808CKTTR
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7808C
UA7808CKTTRG3
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7808C
UA7808QKTE
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
-40 to 125
UA7810-W
ACTIVE
WAFERSALE
YS
TBD
Call TI
Call TI
UA7810CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7810C
UA7810CKCE3
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7810C
3952
Addendum-Page 1
Samples
www.ti.com
12-Jan-2015
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA7810CKCS
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7810C
UA7810CKCSE3
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7810C
UA7810CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
0 to 125
UA7810C
UA7810CKTTR
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7810C
UA7810CKTTRG3
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7810C
UA7810QKTE
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
-40 to 125
UA7812CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7812CKCE3
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
UA7812CKCS
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7812C
UA7812CKCSE3
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7812C
UA7812CKCT
ACTIVE
TO-220
KCT
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7812C
UA7812CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
0 to 125
UA7812C
UA7812CKTTR
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7812C
UA7812CKTTRG3
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7812C
UA7812QKTE
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
-40 to 125
UA7812C
UA7812C
UA7815CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7815C
UA7815CKCS
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7815C
UA7815CKCSE3
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7815C
UA7815CKCT
ACTIVE
TO-220
KCT
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7815C
UA7815CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
0 to 125
UA7815C
UA7815CKTTR
ACTIVE
DDPAK/
TO-263
KTT
500
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7815C
UA7815QKTE
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
Addendum-Page 2
Samples
www.ti.com
12-Jan-2015
Orderable Device
Status
(1)
Eco Plan
Lead/Ball Finish
(2)
(6)
(3)
Op Temp (C)
Device Marking
(4/5)
UA7824CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7824C
UA7824CKCE3
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
0 to 125
UA7824C
UA7824CKCS
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7824C
UA7824CKCSE3
ACTIVE
TO-220
KCS
50
Pb-Free
(RoHS)
CU SN
0 to 125
UA7824C
UA7824CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
0 to 125
UA7824C
UA7824CKTTR
ACTIVE
DDPAK/
TO-263
KTT
Green (RoHS
& no Sb/Br)
CU SN
Level-3-245C-168 HR
0 to 125
UA7824C
UA7885CKC
OBSOLETE
TO-220
KC
TBD
Call TI
Call TI
UA7885CKTER
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
UA7885QKTE
OBSOLETE
PFM
KTE
TBD
Call TI
Call TI
500
(1)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 3
Samples
www.ti.com
12-Jan-2015
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 4
12-Jan-2015
Device
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
UA7805CKTTR
DDPAK/
TO-263
KTT
500
330.0
24.4
10.8
16.3
5.11
16.0
24.0
Q2
UA7808CKTTR
DDPAK/
TO-263
KTT
500
330.0
24.4
10.8
16.3
5.11
16.0
24.0
Q2
UA7810CKTTR
DDPAK/
TO-263
KTT
500
330.0
24.4
10.8
16.3
5.11
16.0
24.0
Q2
UA7812CKTTR
DDPAK/
TO-263
KTT
500
330.0
24.4
10.8
16.3
5.11
16.0
24.0
Q2
UA7815CKTTR
DDPAK/
TO-263
KTT
500
330.0
24.4
10.8
16.3
5.11
16.0
24.0
Q2
UA7824CKTTR
DDPAK/
TO-263
KTT
500
330.0
24.4
10.8
16.3
5.11
16.0
24.0
Q2
Pack Materials-Page 1
12-Jan-2015
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
UA7805CKTTR
DDPAK/TO-263
KTT
500
340.0
340.0
38.0
UA7808CKTTR
DDPAK/TO-263
KTT
500
340.0
340.0
38.0
UA7810CKTTR
DDPAK/TO-263
KTT
500
340.0
340.0
38.0
UA7812CKTTR
DDPAK/TO-263
KTT
500
340.0
340.0
38.0
UA7815CKTTR
DDPAK/TO-263
KTT
500
340.0
340.0
38.0
UA7824CKTTR
DDPAK/TO-263
KTT
500
340.0
340.0
38.0
Pack Materials-Page 2
MECHANICAL DATA
MPFM001E OCTOBER 1994 REVISED JANUARY 2001
KTE (R-PSFM-G3)
0.080 (2,03)
0.070 (1,78)
0.365 (9,27)
0.360 (9,14)
0.050 (1,27)
0.040 (1,02)
0.350 (8,89)
0.220 (5,59)
NOM
Thermal Tab
(See Note C)
0.360 (9,14)
0.350 (8,89)
0.295 (7,49)
NOM
0.320 (8,13)
0.310 (7,87)
0.420 (10,67)
0.410 (10,41)
3
0.025 (0,63)
0.031 (0,79)
0.100 (2,54)
Seating Plane
0.004 (0,10)
0.010 (0,25) M
0.005 (0,13)
0.001 (0,03)
0.200 (5,08)
0.041 (1,04)
0.031 (0,79)
0.010 (0,25)
NOM
Gage Plane
3 6
0.010 (0,25)
4073375/F 12/00
NOTES: A.
B.
C.
D.
E.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as components) are sold subject to TIs terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TIs terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TIs goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or enhanced plastic are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
www.ti.com/automotive
Amplifiers
amplifier.ti.com
www.ti.com/communications
Data Converters
dataconverter.ti.com
www.ti.com/computers
DLP Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
www.ti.com/energy
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
www.ti.com/video
RFID
www.ti-rfid.com
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright 2015, Texas Instruments Incorporated