Académique Documents
Professionnel Documents
Culture Documents
I.
NOMENCLATURE
J/K
ISCr = 0.0017A / oC
III.
INTRODUCTION
c
978-1-61284-379-7/11$26.00 2011
IEEE
258
V.
Step 1
Subsystem 1 is shown in Figure 1. This model converts
the module operating temperature given in degrees Celsius to
Kelvin.
Figure 2. Subsystem 1.
(1)
Figure 3 gives the circuit under subsystem 1.
(2)
I 0 = I rs [
q * Eg 0
T 3
] exp[
Tr
Bk
1 1
]
Tr T
(3)
q * (VPV + I PV Rs )
I PV = N P * I ph N P * I 0 [exp
1]
N S AkT
(4)
Where Vpv = Voc, Np = 1 and Ns = 36
IV.
REFERENCE MODEL
B. Step 2
Subsystem 2 is shown in Figure 4. This model takes
following inputs.
Insolation/ Irradiation (G / 1000) 1 kW/ m2 = 1.
Module operating temperature TaK = 30 to 70oC
Module reference temperature TrK = 25oC.
Short circuit current (ISC) at reference temp. = 2.55A
259
C. Step 3
Subsystem 3 is shown in Figure 6. This model takes short
circuit current ISC at reference temp. = 2.55A and Module
reference temperature TrK = 25oC as input.
Figure 6. Subsystem 3
E. Step 5
Subsystem 5 is shown in Figure 10.
F. Step 6
Subsystem 6 is shown in Figure 12.
Figure 7. Circuit under subsystem 3
D.
Step 4
Subsystem 4 is shown in Figure 8.
Figure 8. Subsystem 4.
260
G. Step 7
All above six models are interconnected as given in Figure
14.
2.
3.
4.
261
(ii)
4.
2.
[2]
3.
262
[3]
[4]
[5]
[6]
www.mathworks.com
263