Académique Documents
Professionnel Documents
Culture Documents
Account Information
Component Information
Component ID:
Secondary ID:
Component Type:
Manufacturer:
Model:
Application:
Sump Capacity:
Filter Information
Sample Information
1142448 E
Tracking Number:
Lab Number:
Lab Location:
Data Analyst:
Sampled:
Received:
Completed:
DIESEL ENGINE
TOYOTA
Missing Information
OFF-HIGHWAY
0L
Miscellaneous Information
G-108487
Guatemala City
MIO
05-Mar-2015
16-Mar-2015
18-Mar-2015
Product Information
Copper
Lead
Tin
Cadmium
Silver
Vanadium
Silicon
Sodium
Potassium
Titanium
Molybdenum
Antimony
Manganese
Lithium
Magnesium
Calcium
Barium
61
170
13
44
879
1298
1099 1289
231
101
271
17
15
45
839
1325
1138 1357
95
39
105
52
1242 1505
1328 1594
Oxidation
5000
342960 Unk
Unk
<1 - Estimate
0.6 - FTIR
<.1 - FTIR
15.2
5.86
10
19-Jan-2015
9900
346845 Unk
Unk
<1 - Estimate
1.0 - FTIR
<.1 - FTIR
15.5
4.81
3 05-Mar-2015 16-Mar-2015
4388
351233 Unk
Unk
<1 - Estimate
0.9 - FTIR
<.1 - FTIR
14.6
7.27
07-Jan-2015
Sample #
Nitration
Viscosity
100 C
1 15-Nov-2014 25-Nov-2014
Base
Number
Viscosity
40C
cSt
Acid
Number
Water
cSt
Lube
Added
% Vol
Lube Change
% Vol
Date Sampled
% Vol
Sample #
Soot
km
Fluid Properties
Fuel
Dilution
Unit Time
km
Contaminants
Filter Change
Lube Time
Date Received
Sample Information
Zinc
Aluminum
107
Phosphorous
Nickel
Boron
Chromium
Iron
Sample #
mg
mg
abs/0.1
KOH/g KOH/g abs/cm mm
Additional Testing
ISO Code
Based On
4/6/14
//
//
//
>4
m
>6
m
> 10
m
> 14
m
> 21
m
> 38
m
> 70
m
> 100
m
Test
Method
Comments are advisory only and are based on the assumption that the sample and data submitted are valid. Missing fluid or component information limits the evaluation. No warranty is
expressed or implied.
Page 1 of 3
G-108487
Historical
Comments
1142448 E
763143-0003-0000
Page 2
Check air induction system (filters, housings, air intake, etc:) for source of abrasives (dirt). Abrasives are at a SEVERE LEVEL:
Suggest checking compression (blow-by) or similar diagnostics and monitoring engine fault codes. LUBRICANT and FILTER
CHANGE is suggested if not done at sampling time. Cylinder region metals (pistons, rings, liners etc.) are at a SIGNIFICANT
1
LEVEL; Please provide COMPONENT MODEL number to compare data to the correct standards for this component. Please
provide missing lubricant information. Manufacturer, product name, and viscosity grade are needed to properly evaluate
data. Resample at half interval;
Check air induction system (filters, housings, air intake, etc:) for source of abrasives (dirt). Abrasives are at a SEVERE LEVEL:
2 Suggest flushing system; Suggest checking compression (blow-by) or similar diagnostics and monitoring engine fault codes.
Cylinder region metals (pistons, rings, liners etc.) are at a SIGNIFICANT LEVEL; Resample at half interval;
Page 2 of 3
G-108487
1142448 E
763143-0003-0000
Page 3 of 3
Page 3