Académique Documents
Professionnel Documents
Culture Documents
Page 1 of 2
Search
Spotlight
Company Profile
Advantages
Request Info
Tech Support
Contact Us
Drills
Counterbores
Milling Cutters
End Mills
Hardness (Vickers):
Oxidation Temperature:
550C (1050F)
Friction Coefficient:
.65
Thickness:
2-4 microns
TiCN
Titanium Carbonitride, blue grey in color, has a hard,
smooth finish which offers improved wear and built up
edge resistance. TiCN has good adhesion, toughness,
and resistance to chipping and performs well on drills and
reamers where moderate temperatures are generated at
the cuffing edge.
Hardness (Vickers):
Oxidation Temperature:
400C (750F)
Friction Coefficient:
.45
Thickness:
2-4 microns
Port Contour
Cutters
Centers
Countersinks
Single Points
TiAlN
Titanium Aluminum Nitride, violet bronze in color, actually
forms a hard aluminum oxide layer in hot (> 800C), dry
machining applications. This further reflects the heat back
into the chip and away from the tool and workpiece.
Greater ductility makes it a good choice for interrupted
cuts. Increased production levels at higher feeds and
speeds and longer tool life in high heat applications are
the primary benefits.
Hardness (Vickers):
Oxidation Temperature:
800C (1450F)
Friction Coefficient:
.70
Thickness:
2-4 microns
AlTiN
Aluminum Titanium Nitride, black in color, is a harder,
smoother variation of TiAlN. Created for abrasive and
high temperature applications (> 800C). AlTiN creates an
aluminum oxide layer during the cutting process. It is
increasing in popularity for drilling, counterboring and
milling.
Hardness (Vickers):
Oxidation Temperature:
800C (1450F)
Friction Coefficient:
.45
Thickness:
2-4 microns
problem.
http://www.hannibalcarbide.com/technical-support/titanium-coatings.php
18/03/2015
Titanium coatings TiN, TiCN, TiAlN, AlTiN - HANNIBAL CARBIDE TOOL, INC.
Page 2 of 2
Industrial Supply
Association
http://www.hannibalcarbide.com/technical-support/titanium-coatings.php
18/03/2015