Académique Documents
Professionnel Documents
Culture Documents
: TCP185MEF1
Service Manual
Color Television
CHASSIS : CP-185M
Model : KR14E5/DTA-14V3VM
KR20E5/DTA-20V3VM
KR21E5/DTA-21V3VM
14V3/20V3/21V3
Specification
Version
TV Standard
Sound system
Power Consumption
Sound Output Power
Speaker
Teletext system
Aerial Input
Channel coverage
Tuning System
TK
PAL-SECAM B/G-D/K
MONO
14": 39W; 20": 42W; 21": 45W
2.5W(at 60% mod, 10% THD)
3W 8 ohm
NONE
75ohm unbalanced
Off-air cannels, S-cable channels and hyperband
Frequency synthesiser tuning system
14" : 34cm
20" : 48cm
21" : 51cm
Channel indication
On screen Display
Program selection
100 programmes
Caution
: In this Service Manual, some parts can be changed for improving, their performance
without notice in the parts list.So,if you need the latest parts information, please refer
to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)
Feb.2001
TABLE OF CONTENTS
SAFETY INSTRUCTION......................................................................................................................2
SPECIFICATIONS ...............................................................................................................................3
1. 21 Pin EURO-SCART ..................................................................................................................................3
2 Channel table ...............................................................................................................................................4
SCHEMATIC DIAGRAM......................................................................................................................9
EXPLODED VIEW ...............................................................................................................................10
PRINTED CIRCUIT BOARD................................................................................................................13
SERVICE PARTS LIST........................................................................................................................14
1. The different parts list...................................................................................................................................19
SAFETY INSTRUCTION
WARNING : Only competent service personnel may carry out work involving the testing or repair of this equipment
SAFETY PRECAUTION
1. Potentials of high voltage are present when this receiver is operating. Operation of the receiver outside the cabinet or
with the back cover removed involves a shock hazard from the receiver.
1)Servicing should not be attempted by anyone who is not thoroughly familiar with the precautions necessary when
working on high voltage equipment.
2)Discharge the high potential of the picture tube before handling the tube. The picture tube is highly evacuated and if
broken, glass fragments will be violently expelled.
2. If any Fuse in this TV receiver is blown, replace it with the FUSE specified in the Replacement Parts List.
3. When replacing a high wattage resistor (oxide metal film resistor) in circuit board, keep the resistor body 10 mm away
from the circuit board.
4. Keep wires away from high voltage or high temperature components.
5. This receiver must operate under AC 230 volts, 5O Hz. NEVER connect to a DC supply of any other voltage or
frequency.
SPECIFICATIONS
21Pin EURO-SCART
PIN
SIGNAL DESCRIPTION
MATCHING VALUE
Audio Earth
Blue Earth
Blue Input
Slow Switching
Green Earth
10
N.C
11
Green Input
12
N.C
13
Red Earth
14
Blanking Earth
15
Red Input
Chroma Input
16
Fast Switching
17
18
Video In Earth
19
Video Output
20
Video Input
21
Common Earth
SPECIFICATIONS
Channel table
FREQUENCY TABLE CP-185M
CH
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
EUROP
E CCIR
46.25
48.25
55.25
62.25
175.25
182.25
189.25
196.25
203.25
210.25
217.25
224.25
53.75
82.25
183.75
192.25
201.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
FRANCE
55.75 (L')
60.5 (L')
63.75 (L')
176.00
184.00
192.00
200.00
208.00
216.00
189.25 (LUX)
69.25 (L')
76.25 (L')
83.25 (L')
90.25
97.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
GB(IRELAND)
45.75
53.75
61.75
175.25
183.25
191.25
199.25
207.25
215.25
223.25
231.25
239.25
247.25
49.75
57.75
65.75
77.75
85.75
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
EAST
OIRT
49.75
59.25
77.25
85.25
93.25
175.25
183.25
191.25
199.25
207.25
215.25
223.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
CH
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C53
C54
C55
C56
C57
C58
C59
C60
C61
C62
C63
C64
C65
C66
C67
C68
C69
C70
C71
C72
C73
C74
C75
C76
C77
S01
EUROP
E CCIR
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
69.25
76.25
83.25
90.25
97.25
59.25
93.25
105.25
FRANCE
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
104.75
GB(IRELAND)
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
103.25
EAST
OIRT
623.25
631.25
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
105.25
SPECIFICATIONS
CH
S02
S03
S04
S05
S06
S07
S08
S09
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
EUROP
E CCIR
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
168.25
231.25
238.25
245.25
252.25
259.25
266.25
273.25
280.25
287.25
294.25
303.25
FRANCE
116.75
128.75
140.75
152.75
164.75
176.75
188.75
200.75
212.75
224.75
236.75
248.75
260.75
272.75
284.75
296.75
136.00
160.00
303.25
GB(IRELAND)
111.25
119.25
127.25
135.25
143.25
151.25
159.25
167.25
255.25
263.25
271.25
279.25
287.25
295.25
303.25
-
EAST
OIRT
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
168.25
231.25
238.25
245.25
252.25
259.25
266.25
273.25
280.25
287.25
294.25
303.25
CH
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
EUROP
E CCIR
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
FRANCE
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
GB(IRELAND)
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
EAST
OIRT
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
ALIGNMENT INSTRUCTIONS
Microcontroller configuration : Service mode
To switch the TV set into service mode please see instruction below.
1 - Select pr. number 91
2 - Adjust sharpness to minimum and exit all menu.
3 - Quickly press the key sequence : RED - GREEN - menu
To exit SERVICE menu press menu key or Std By key.
In Service Mode press OKto stop the microcontroller i.e. the I2C bus is free and the set can be controlled by external equipment.
Press OKagain to allow the microcontroller to control the set again
Microcontroller configuration :
Tuner Option
Option
DW
PH1
PH2
Tuner maker
DAEWOO / SAMSUNG
PHILIPS ( Video processor AGC )
PHILIPS (tuner internal AGC )
System Option
Option
TF
TK
TU
TA
System
PAL - B/G
PAL/SECAM - B/G, D/K (set for Russia)
PAL - I/I
PAL/SECAM - B/G, SECAM - L/L
TV set Alignment
1 - G2 alignment
- Set TV in NORMAL I mode
- TV in AV mode without video signal ? Black screen.
- TV preset with WP Red, WP Green and WP Blue equal to 32.
- TV preset with Black R, Black G equal to 8.
- Adjust screen volume ( on FBT ) such that the highest cathode cut-off voltage measured on CRT board, is Vcut-off 5V.
Screen size
14
20& 21
Vcut-off
115 V
125 V
2 - White balance
- Select a dark picture and adjust Black G and Black R to the desired colour temperature.
- Select a bright picture and adjust WP Red, WP Green, WP Blue to the desired colour temperature.
ALIGNMENT INSTRUCTIONS
3 - Focus
- Adjust the Focus volume ( on FBT ) to have the best resolution on screen.
4 - Vertical geometry
- Adjust the Vertical Amplitude, Shift, S-Correction and Slope
to compensate for vertical distortion
7 - AGC
- Adjust the antenna signal level to 68 dBV 2 for Daewoo tuner (63 dBV 1 for Philips tuner).
- Set RF AGC to 0.
- Increase RF AGC level and stop when the level on pin 6 of I501 goes below 2.5 Vdc
EXPLODED VIEW
1. 14V3
10
EXPLODED VIEW
2. 20V3
11
EXPLODED VIEW
3. 21V3
12
13
Caution: In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)
LOC.
PART CODE
PART NAME
PART DESCRIPTION
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
REMARK
ZZ110
PTACPWA652
ACCESSORY AS
DTA-14C4TFF
C805
CEYN2W151P
C ELECTRO
00040
4850A03310
ANT ROD
PH-RM-008A
C812
CH1AFE472M
C CERA AC
2 I
00100
4850Q00910
BATTERY
R03/NN
D707
DSML1216W-
LED
SML1216W
M821
4858213800
BAG INSTRUCTION
L.D.P.E T0.05X250X400
D820
DRGP30J---
DIODE
RGP30J
ZZ100
48B3740A10
TRANSMITTER REMOCON
R-40A10
F801
5FSCB4022R
FUSE CERA
ZZ120
PTBCSHA670
COVER BACK AS
DTA-14V3VM
G900
4SG0D00103
SPARK GAP
S-23 900V-1.5KV
M211
4852152101
COVER BACK
HIPS BK
I301
PTA2SW5405
1TDA8357J- + 7174301011
M541
4855415800
SPEC PLATE
00001
1TDA8357J-
IC VERTICAL
TDA8357J
ZZ130
PTPKCPA670
PACKING AS
DTA-14V3VM
0000A
4857025405
HEAT SINK
A1050P-H24 T=2
10
6520010100
STAPLE PIN
18M/M J D O
0000B
7174301011
SCREW TAPPTITE
20
6520010200
STAPLE PIN
#3417
I501
1DW3813DE1
IC MICOM
DW9381/N1/3-DE1
M801
4858038700
BOX CARTON
SW-2 DTQ-1463FW
I601
1TDA7267A-
IC AMP
TDA7267A
M811
4858187500
PAD
EPS 14V3
I702
1AT24C08PC
IC
AT24C08-10PC
M821
4858210702
BAG P.E
L.D.P.E T0.03X1200X1000
I703
1KRT30----
IC PREAMP
KRT30
ZZ131
48519A4710
1401S-1015-1P
I801
PTA2SW4618
1STRF6653- + 7174300811
ZZ132
58G0000084
COIL DEGAUSSING
DC-1450
I801
1STRF6653-
IC SMPS
STR-F6653
ZZ140
PTCACAA670
CABINET AS
DTA-14V3VM
I801A
4857024618
HEAT SINK
AL EX
M191
4851933402
BUTTON CTRL
4940102+5536600
I801B
7174300811
SCREW TAPPTITE
M201A
4856013301
30X140 YL
I804
1LTV817C--
IC PHOTO COUPLER
LTV-817C
2I
M201B
4856215402
WASHER RUBBER
CR T2.0
I806
1SE110N---
IC REGULATOR
SE110N
M201C
4856013300
30X80 BK
I810
TX0202DA--
THYRISTOR
X0202DA1BA2
M211A
7172401412
SCREW TAPPTITE
I820
1KA7805---
IC REGULATOR
KA7805
M211D
7172401412
SCREW TAPPTITE
I822
1KA7808---
IC REGULATOR
KA7808
M321
4853214800
BRKT
FR HIPS BK
I823
1LE33CZ---
IC REGULATOR
LE33CZ
M481
4854940103
BUTTON
ABS BK
I901
PTC3SW1100
1TDA6107Q- + 7174300811
M561
4855613600
MARK BRAND
COPPER T0.4
00001
1TDA6107Q-
IC VIDEO
TDA6107Q
M681
4856812001
TIE CABLE
NYLON66 DA100
0000A
4857031100
HEAT SINK
A1050P-H24 T2.0
SP01A
7178301011
SCREW TAPPTITE
0000B
7174300811
SCREW TAPPTITE
2I
V901
PTRTPWA001
CRT AS
JPA1
4859200401
SOCKET RGB
YRS21-R1
V01
58D1000046
COIL DY
ODY-M1401
JS1
4859109950
PH-JB-9710A
V02
48A96R004-
RUBBER WEDGE
HMR 28 SR (|0X54)
L401
58H0000016
COIL H-LINEARITY
L-102 (102UH)
V03
4850PM001-
MAGNET CP
LF801
5PLF24A1--
FILTER LINE
LF-24A1
V04
2TC26019BE
TAPE CLOTH
19X30 BEIGE
M351
4853533600
HOLDER LED
P.P BK
V05
2224050026
BOND SILICON
M791
4857913304
RUBBER CUSHION
FR RUBBER SPONGE
V901
48A96414P1
CRT BARE
A34JLL90X
P401
4850705N16
CONNECTOR
BIC-05T-25T+ULW=300
ZZ200
PTFMSJA670
MASK FRONT AS
DTA-14V3VM
P402
4859240020
CONN WAFER
YFW500-05
M201
4852068301
MASK FRONT
HIPS BK
P501
4850705N16
CONNECTOR
BIC-05T-25T+ULW=300
ZZ210
PTSPPWA652
SPEAKER AS
DTA-14C4TFF
PWC1
4859908110
CORD POWER AS
1-L0+H03VVH2-F+HOU=2200
P601A
4850703S50
CONNECTOR
YH025-03+35098+ULW=200
SP01
4858314010
SPEAKER
SP-5070F01 3W 8 OHM
Q401
PTP2SW4510
TKSC5386-- + 7174300811
00001
TKSC5386--
TR
KSC5386
ZZ290
PTMPMSA670
DTA-14V3VM
0000A
4857024510
HEAT SINK
AL EX
C404
CMYH3C822J
C MYLAR
0000B
7174300811
SCREW TAPPTITE
C408
CMYE2D334J
C MYLAR
200V PU 0.33MF J
R801
DEC140M290
POSISTOR
ECPCC140M290
C801
CL1JB3474K
C LINE ACROSS
R819
RX07B339JP
R CEMENT
14
LOC.
PART CODE
PART NAME
PART DESCRIPTION
SCT1
4859303430
SOCKET CRT
PCS633A
SF1
5PK2960M--
FILTER SAW
K2960M
SW801
5S40101146
SW POWER PUSH
SS-160-7-B
T401
50D10A2---
TRANS DRIVE
TD-10A2
T402
50H0000211
FBT
1142.5109
T801
50M3535A1-
TRANS SMPS
2074.5046
U100
4859719930
TUNER VARACTOR
X502
5XE12R000E
Z501
5PYXT5R5MB
Z502
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
C412
CEXF2C339V
C ELECTRO
C414
CMXM2A104J
C MYLAR
C417
CMXL2E104K
C MYLAR
C418
CCXB1H102K
C CERA
C420
CCXB2H222K
C CERA
C500
CEXF1H478V
C ELECTRO
DT5-BF18D
C501
CEXF1H100V
C ELECTRO
CRYSTAL QUARTZ
C502
CEXF1H100V
C ELECTRO
FILTER CERA
XT 5.5MB
C504
CMXM2A332J
C MYLAR
5PYXT6R5MB
FILTER CERA
XT 6.5MB
C509
CEXF1E470V
C ELECTRO
ZZ200
PTMPJ0A670
DTA-14V3VM
C511
CMXM2A224J
C MYLAR
100V 0.22MF J
C315
CEXF2C470C
C ELECTRO
C512
CMXM2A224J
C MYLAR
100V 0.22MF J
C415
CEXF2E100V
C ELECTRO
C513
CBXF1H104Z
C CERA SEMI
C603
CEXF1C471V
C ELECTRO
C514
CEXF1E101V
C ELECTRO
C810
CCXB3D102K
C CERA
C517
CEXF1H109V
C ELECTRO
C813
CEXF2C101V
C ELECTRO
C519
CEXF1H229V
C ELECTRO
C814
CEXF2C101V
C ELECTRO
C522
CEXF1H479V
C ELECTRO
C823
CEXF1E102V
C ELECTRO
C524
CMXM2A104J
C MYLAR
C832
CEXF1E102V
C ELECTRO
C525
CCXB1H102K
C CERA
C840
CEXF1C222V
C ELECTRO
C526
CMXM2A104J
C MYLAR
C841
CEXF1C222V
C ELECTRO
C527
CMXM2A473J
C MYLAR
C861
CEXF1E102V
C ELECTRO
C528
CEXF1E101V
C ELECTRO
C965
CCXB3D102K
C CERA
C530
CEXF1C101V
C ELECTRO
ZZ200
PTMPJBA670
DTA-14V3VM
C532
CEXF1H100V
C ELECTRO
N001
4857417500
TERM PIN
DA-IB0214(D2.3/DY PIN)
C533
CCXB1H102K
C CERA
N002
4857417500
TERM PIN
DA-IB0214(D2.3/DY PIN)
C537
CBXF1H104Z
C CERA SEMI
N003
4857417500
TERM PIN
DA-IB0214(D2.3/DY PIN)
C555
CEXF1C470V
C ELECTRO
N004
4857417500
TERM PIN
DA-IB0214(D2.3/DY PIN)
C560
CBXF1H104Z
C CERA SEMI
P601
485923162S
CONN WAFER
YW025-03 (STICK)
C564
CEXF1E101V
C ELECTRO
R305
RS02Z331JS
R M-OXIDE FILM
C565
CBXF1H104Z
C CERA SEMI
R402
RF01Z129J-
R FUSIBLE
C570
CCXB1H472K
C CERA
R415
RS02Z102JS
R M-OXIDE FILM
2W 1K OHM J SMALL
C571
CCXB1H821K
C CERA
R450
RS02Z103JS
R M-OXIDE FILM
C580
CEXF1E221V
C ELECTRO
R802
RS02Z753JS
R M-OXIDE FILM
C585
CCXB1H222K
C CERA
R803
RS02Z473JS
R M-OXIDE FILM
C590
CXCH1H270J
C CERA
R804
RF02Z228K-
R FUSIBLE
C591
CXCH1H270J
C CERA
R808
RS02Z821JS
R M-OXIDE FILM
C592
CBXF1H104Z
C CERA SEMI
ZZ200
PTMPJRA670
DTA-14V3VM
C593
CEXF1E101V
C ELECTRO
C101
CEXF1H100V
C ELECTRO
C599
CEXF1H229V
C ELECTRO
C102
CEXF1H470V
C ELECTRO
C600
CEXF1E101V
C ELECTRO
C106
CEXF1E221V
C ELECTRO
C601
CEXF1H108V
C ELECTRO
C120
CCXB1H102K
C CERA
C602
CCXF1H103Z
C CERA
C121
CEXF1H100V
C ELECTRO
C650
CEXF1E470V
C ELECTRO
C305
CEXF1E221V
C ELECTRO
C770
CEXF1C101V
C ELECTRO
C313
CMXM2A104J
C MYLAR
C803
CCXF3A472Z
C CERA
C320
CBXF1H104Z
C CERA SEMI
C804
CCXF3A472Z
C CERA
C390
CMXM2A473J
C MYLAR
C806
CEXF1H330V
C ELECTRO
C401
CEXF1H470V
C ELECTRO
C807
CCXF1H473Z
C CERA
15
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
REMARK
C808
CEXF1H479V
C ELECTRO
C523
CCZF1H103Z
C CERA
50V F 0.01MF Z
C820
CCXB3A471K
C CERA
C529
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z
C821
CCXB1H102K
C CERA
C531
CCZF1H473Z
C CERA
C824
CCXB3A471K
C CERA
C534
CCZF1H223Z
C CERA
50V F 0.022MF Z
C831
CCXB3A471K
C CERA
C535
CCZF1H223Z
C CERA
50V F 0.022MF Z
C835
CEXF1H470V
C ELECTRO
C536
CCZF1H223Z
C CERA
50V F 0.022MF Z
C844
CEXF1E101V
C ELECTRO
C577
CCZB1H561K
C CERA
50V B 560PF K
C863
CEXF1E101V
C ELECTRO
C771
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z
C866
CCXB3A471K
C CERA
C809
CCZB1H102K
C CERA
C888
CEXF1C470V
C ELECTRO
C830
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z
C910
CCXB1H561K
C CERA
C850
CCZB1H821K
C CERA
C968
CMXL2E104K
C MYLAR
CA01
CCZB1H101K
C CERA
CA04
CEXD1H229F
C ELECTRO
CA02
CCZB1H101K
C CERA
CA05
CCXB1H102K
C CERA
CA03
CCZB1H101K
C CERA
F801A
4857415001
CLIP FUSE
PFC5000-0702
CA10
CCZB1H102K
C CERA
F801B
4857415001
CLIP FUSE
PFC5000-0702
D101
D1N4148---
DIODE
1N4148 (TAPPING)
L802
58C9430599
COIL CHOKE
AZ-9004Y(94MH)
D313
D1N4937G--
DIODE
1N4937G (TAPPING)
Q101
TKTC3198Y-
TR
KTC3198Y
D341
DUZ33B----
DIODE ZENER
UZ-33B
Q402
T2SD1207T-
TR
2SD1207-T (TAPPING)
D350
DUZ12BM---
DIODE ZENER
UZ-12BM (UNIZON)
Q501
TKTA1266Y-
TR
KTA1266Y (TP)
D351
DUZ33B----
DIODE ZENER
UZ-33B
Q502
TKTC3198Y-
TR
KTC3198Y
D360
DUZ33B----
DIODE ZENER
UZ-33B
Q503
TKTC3198Y-
TR
KTC3198Y
D361
DUZ33B----
DIODE ZENER
UZ-33B
Q510
TKTA1266Y-
TR
KTA1266Y (TP)
D362
DUZ33B----
DIODE ZENER
UZ-33B
Q511
TKTA1266Y-
TR
KTA1266Y (TP)
D405
D1N4937G--
DIODE
1N4937G (TAPPING)
Q520
TKTC3198Y-
TR
KTC3198Y
D407
D1N4937G--
DIODE
1N4937G (TAPPING)
Q807
TKTC3198Y-
TR
KTC3198Y
D408
D1N4937G--
DIODE
1N4937G (TAPPING)
Q808
TKTC3198Y-
TR
KTC3198Y
D450
D1N4937G--
DIODE
1N4937G (TAPPING)
Q809
TKTC3198Y-
TR
KTC3198Y
D501
D1N4148---
DIODE
1N4148 (TAPPING)
Q810
TKTC3198Y-
TR
KTC3198Y
D502
D1N4148---
DIODE
1N4148 (TAPPING)
Q811
TKTC3198Y-
TR
KTC3198Y
D503
D1N4148---
DIODE
1N4148 (TAPPING)
SW700
5S50101090
SW TACT
THVH472GCA
D504
D1N4148---
DIODE
1N4148 (TAPPING)
SW701
5S50101090
SW TACT
THVH472GCA
D520
D1N4148---
DIODE
1N4148 (TAPPING)
SW702
5S50101090
SW TACT
THVH472GCA
D521
D1N4148---
DIODE
1N4148 (TAPPING)
SW703
5S50101090
SW TACT
THVH472GCA
D591
DUZ2R4B---
DIODE ZENER
UZ-2.4B
SW704
5S50101090
SW TACT
THVH472GCA
D710
DMTZJ5R1A-
DIODE ZENER
MTZJ 5.1A
ZZ200
PTMPJAA670
DTA-14V3VM
D801
DLT2A05G--
DIODE
LT2A05G (TP)
10
2TM14006LB
TAPE MASKING
3M #232 6.0X2000M
D802
DLT2A05G--
DIODE
LT2A05G (TP)
20
2TM10006LB
TAPE MASKING
3M #232-MAP-C 6.2X2000M
D803
DLT2A05G--
DIODE
LT2A05G (TP)
A001
4859804993
PCB MAIN
246X246
D804
DLT2A05G--
DIODE
LT2A05G (TP)
C103
CCZB1H102K
C CERA
D805
D1N4937G--
DIODE
1N4937G (TAPPING)
C104
CCZB1H102K
C CERA
D806
D1N4937G--
DIODE
1N4937G (TAPPING)
C350
CCZF1H473Z
C CERA
D808
D1N4937G--
DIODE
1N4937G (TAPPING)
C351
CCZF1H473Z
C CERA
D809
D1N4937G--
DIODE
1N4937G (TAPPING)
C515
CBZR1C222M
C CERA
D810
D1N4937G--
DIODE
1N4937G (TAPPING)
C516
CBZR1C472M
C CERA
D811
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
C518
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z
D821
D1N4937G--
DIODE
1N4937G (TAPPING)
C520
CCZB1H102K
C CERA
D824
D1N4148---
DIODE
1N4148 (TAPPING)
C521
CCZB1H102K
C CERA
D825
D1N4148---
DIODE
1N4148 (TAPPING)
16
LOC.
PART CODE
PART NAME
PART DESCRIPTION
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
D830
D1N4937G--
DIODE
1N4937G (TAPPING)
R401
RD-4Z272J-
R CARBON FILM
D831
D1N4937G--
DIODE
1N4937G (TAPPING)
R404
RD-4Z399J-
R CARBON FILM
D840
D1N4148---
DIODE
1N4148 (TAPPING)
R420
RD-AZ223J-
R CARBON FILM
D841
D1N4148---
DIODE
1N4148 (TAPPING)
R501
RD-AZ101J-
R CARBON FILM
D860
D1N4937G--
DIODE
1N4937G (TAPPING)
R502
RD-AZ101J-
R CARBON FILM
DA02
DUZ12BM---
DIODE ZENER
UZ-12BM (UNIZON)
R505
RD-AZ101J-
R CARBON FILM
DA03
DMTZJ5R1A-
DIODE ZENER
MTZJ 5.1A
R506
RD-AZ332J-
R CARBON FILM
DA05
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R507
RD-AZ101J-
R CARBON FILM
DA06
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R508
RD-AZ332J-
R CARBON FILM
DA08
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R509
RD-AZ681J-
R CARBON FILM
DA09
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R511
RD-AZ333J-
R CARBON FILM
DA10
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R512
RD-AZ101J-
R CARBON FILM
DA11
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R513
RD-AZ101J-
R CARBON FILM
DA27
DUZ5R6BM--
DIODE ZENER
UZ-5.6BM
R514
RD-AZ101J-
R CARBON FILM
J035
RD-4Z390J-
R CARBON FILM
1/4 39 OHM J
R515
RD-AZ153J-
R CARBON FILM
L101
5CPZ100K02
COIL PEAKING
R516
RD-AZ393J-
R CARBON FILM
L301
5CPZ109M04
COIL PEAKING
R517
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
L350
5CPZ109M04
COIL PEAKING
R518
RD-AZ273J-
R CARBON FILM
L351
85801065GY
WIRE COPPER
R520
RD-AZ183J-
R CARBON FILM
L500
5CPZ120K02
COIL PEAKING
R521
RD-AZ391J-
R CARBON FILM
L501
5CPZ100K02
COIL PEAKING
R522
RD-AZ221J-
R CARBON FILM
L502
5CPZ100K02
COIL PEAKING
R523
RD-AZ331J-
R CARBON FILM
L510
5CPZ100K02
COIL PEAKING
R524
RD-AZ561J-
R CARBON FILM
L511
5CPZ100K02
COIL PEAKING
R525
RD-AZ104J-
R CARBON FILM
L512
5CPZ100K02
COIL PEAKING
R526
RD-4Z479J-
R CARBON FILM
L600
5MC0000100
COIL BEAD
HC-3550
R527
RD-AZ431J-
R CARBON FILM
L801
5MC0000100
COIL BEAD
HC-3550
R528
RD-AZ221J-
R CARBON FILM
L803
5MC0000100
COIL BEAD
HC-3550
R530
RD-AZ470J-
R CARBON FILM
1/6 47 OHM J
R101
RD-AZ473J-
R CARBON FILM
R531
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R102
RD-AZ472J-
R CARBON FILM
R533
RD-AZ103J-
R CARBON FILM
R103
RD-AZ123J-
R CARBON FILM
R534
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R104
RD-AZ104J-
R CARBON FILM
R535
RD-AZ101J-
R CARBON FILM
R105
RD-AZ392J-
R CARBON FILM
R537
RD-AZ101J-
R CARBON FILM
R106
RD-AZ101J-
R CARBON FILM
R538
RD-AZ101J-
R CARBON FILM
R107
RD-AZ101J-
R CARBON FILM
R539
RD-AZ101J-
R CARBON FILM
R120
RD-AZ101J-
R CARBON FILM
R555
RD-AZ103J-
R CARBON FILM
R170
RD-AZ133J-
R CARBON FILM
R556
RD-AZ822J-
R CARBON FILM
R302
RD-2Z159J-
R CARBON FILM
R567
RD-AZ101J-
R CARBON FILM
R310
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R571
RD-AZ432J-
R CARBON FILM
R311
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R572
RD-AZ122J-
R CARBON FILM
R340
RD-4Z473J-
R CARBON FILM
R573
RD-AZ272J-
R CARBON FILM
R341
RD-4Z242J-
R CARBON FILM
R575
RD-AZ123J-
R CARBON FILM
R350
RN-4Z1501F
R METAL FILM
R580
RD-AZ561J-
R CARBON FILM
R351
RN-4Z1501F
R METAL FILM
R585
RD-AZ224J-
R CARBON FILM
R355
RD-AZ272J-
R CARBON FILM
R586
RD-AZ221J-
R CARBON FILM
R356
RD-4Z562J-
R CARBON FILM
R587
RD-AZ101J-
R CARBON FILM
R360
RD-4Z564J-
R CARBON FILM
R588
RD-AZ101J-
R CARBON FILM
R390
RD-4Z159J-
R CARBON FILM
R589
RD-AZ101J-
R CARBON FILM
17
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
REMARK
LOC.
PART CODE
PART NAME
PART DESCRIPTION
R590
RD-4Z103J-
R CARBON FILM
R830
RD-AZ332J-
R CARBON FILM
R591
RD-AZ221J-
R CARBON FILM
R840
RD-4Z220J-
R CARBON FILM
1/4 22 OHM J
R592
RD-AZ103J-
R CARBON FILM
R841
RD-2Z249J-
R CARBON FILM
R593
RD-AZ103J-
R CARBON FILM
R850
RD-2Z479J-
R CARBON FILM
R594
RD-AZ103J-
R CARBON FILM
R855
RD-4Z185J-
R CARBON FILM
R595
RD-AZ473J-
R CARBON FILM
R870
RD-4Z222J-
R CARBON FILM
R596
RD-AZ302J-
R CARBON FILM
1/6 3K OHM J
R888
RD-AZ103J-
R CARBON FILM
R597
RD-AZ153J-
R CARBON FILM
R910
RD-AZ101J-
R CARBON FILM
R598
RD-AZ153J-
R CARBON FILM
R911
RD-AZ101J-
R CARBON FILM
R599
RD-AZ221J-
R CARBON FILM
R912
RD-AZ101J-
R CARBON FILM
R601
RD-AZ432J-
R CARBON FILM
R913
RC-2Z102K-
R CARBON COMP
1/2 1K OHM K
R602
RD-AZ332J-
R CARBON FILM
R914
RC-2Z102K-
R CARBON COMP
1/2 1K OHM K
R610
RD-AZ332J-
R CARBON FILM
R915
RC-2Z102K-
R CARBON COMP
1/2 1K OHM K
R710
RD-AZ431J-
R CARBON FILM
R921
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R711
RD-AZ431J-
R CARBON FILM
R922
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R713
RD-AZ101J-
R CARBON FILM
R923
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R720
RD-AZ122J-
R CARBON FILM
RA01
RD-AZ680J-
R CARBON FILM
1/6 68 OHM J
R721
RD-AZ181J-
R CARBON FILM
RA02
RD-AZ101J-
R CARBON FILM
R722
RD-AZ221J-
R CARBON FILM
RA03
RD-AZ101J-
R CARBON FILM
R723
RD-AZ331J-
R CARBON FILM
RA04
RD-AZ101J-
R CARBON FILM
R724
RD-AZ471J-
R CARBON FILM
RA05
RD-AZ103J-
R CARBON FILM
R805
RD-2Z100J-
R CARBON FILM
1/2 10 OHM J
RA06
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R806
RD-4Z472J-
R CARBON FILM
RA08
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R807
RD-2Z272J-
R CARBON FILM
RA09
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R810
RD-4Z102J-
R CARBON FILM
1/4 1K OHM J
RA10
RD-AZ101J-
R CARBON FILM
R811
RC-2Z565KP
R CARBON COMP
RA11
RD-AZ183J-
R CARBON FILM
R817
RD-AZ473J-
R CARBON FILM
RA12
RD-AZ183J-
R CARBON FILM
R820
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
RA16
RD-AZ680J-
R CARBON FILM
1/6 68 OHM J
R821
RD-4Z102J-
R CARBON FILM
1/4 1K OHM J
RA19
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R823
RD-4Z432J-
R CARBON FILM
RA30
RD-AZ183J-
R CARBON FILM
R829
RD-AZ223J-
R CARBON FILM
RA44
RD-AZ682J-
R CARBON FILM
18
REMARK
PART NAME
14 INCH
20 INCH
21 INCH
C404
C MYLAR
C408
C MYLAR
200V PU 0.33MF J
200V PU 0.27MF J
200V PU 0.27MF J
C417
C MYLAR
100V 0.22MF J
L401
COIL H-LINEARITY
L-102 (102UH)
L-76(76.5UH)
L-102 (102UH)
P401
CONNECTOR
BIC-05T-25T+ULW=300
BIC-05T-25T+ULW=400
BIC-05T-25T+ULW=400
P402
CONN WAFER
YFW500-05
YFW500-05
YFW500-06
P501
CONNECTOR
BIC-05T-25T+ULW=300
BIC-05T-25T+ULW=400
BIC-05T-25T+ULW=400
R350
R METAL FILM
R351
R METAL FILM
R402
R FUSIBLE
R556
R CARBON FILM
R575
R CARBON FILM
R801
POSISTOR
ECPCC140M290
ECPCD7R0M290
ECPCD7R0M290
R823
R CARBON FILM
1/4 3K OHM J
1/4 3K OHM J
SCT1
SOCKET CRT
PCS633A
PCS629-03C
PCS629-03C
M191
BUTTON CTRL
4940102+5536600
4940002+5536900
M201
MASK FRONT
HIPS BK
HIPS BK
M201A
30X140 YL
30X80 BK
M201B
WASHER RUBBER
CR T2.0
CR T2.0
M201C
30X80 BK
30X190 BK
M211
COVER BACK
HIPS BK
HIPS BK
M321
BRKT
FR HIPS BK
M351
HOLDER CORD
M481
BUTTON
ABS BK
M561
MARK BRAND
COPPER T0.4
M781
CLOTH BLACK
M801
BOX CARTON
M811
FR HIPS BK
FR HIPS BK
ABS BK
ABS
A1050P-H24 T0.4
FELT 250X20X0.7
FELT 250X20X0.7
SW-2 DTQ-1463FW
"DW-3 2058,2051"
DW-2
PAD
EPS 14V3
EPS 20V3
EPS 21V3
M821
BAG P.E
L.D.P.E T0.03X1200X1000
L.D.P.E T0.03X1200X1000
L.D.P.E T0.03X1300X1000
V01
COIL DY
ODY-M1401
ODY-M2002
V901
CRT BARE
A34JLL90X
A48JLL90X (P)
V901
CRT(with DY COIL)
ZZ290
A51EFK155X01
DTA-14V3VM
DTA-20V3VM
19
DTA-21V3VM
APPENDIX
FUNCTIONAL DESCRIPTION
for CP-185/M
Video switches
The video switch has one input for an external CVBS or Y/C signal. The selected CVBS signal can be supplied to pin 38,
the IF video output. The selection between both signals is realised by the controlling software in subaddress 22H.
The video ident circuit is connected to the selected signal. This ident circuit is independent of the synchronisation.
Synchronisation circuit
The IC contains separator circuits for the horizontal and vertical sync pulses and a data-slicing circuit which extracts the
digital teletext data from the analogue signal.
The horizontal drive signal is obtained from an internal VCO which is running at a frequency of 25 MHz. This oscillator is
stabilised to this frequency by using a 12 MHz signal coming from the reference oscillator of the -Controller/Teletext
decoder.
The horizontal drive is switched on and off via the soft start/stop procedure. This function is realised by means of variation
of the TON of the horizontal drive pulses.
APPENDIX
FUNCTIONAL DESCRIPTION
The vertical synchronisation is realised by means of a divider circuit. The vertical ramp generator needs an external resistor
and capacitor. For the vertical drive a differential output current is available. The outputs are DC coupled to the vertical output
stage.
The following geometry parameters can be adjusted:
Horizontal shift
Vertical amplitude
Vertical slope
S-correction
Vertical shift
Colour decoder
The ICs can decode PAL, NTSC and SECAM signals. The PAL/NTSC decoder does not need external reference crystals but
has an internal clock generator which is stabilised to the required frequency by using the 12 MHz clock signal from the reference
oscillator of the -Controller/Teletext decoder.
The Automatic Colour Limiting (ACL) circuit (switchable via the ACL bit in subaddress 2OH) prevents oversaturation occurring
when signals with a high chroma-to-burst ratio are received. The ACL circuit is designed such that it only reduces the chroma
signal and not the burst signal. This has the advantage that the colour sensitivity is not affected by this function.
SOFTWARE CONTROL
The CPU communicates with the peripheral functions using Special function Registers (SFRS) which are addressed as RAM
locations. The registers for the Teletext decoder appear as normal SFRs in the -Controller memory map and are written to
these functions by using a serial bus. This bus is controlled by dedicated hardware which uses a simple handshake system for
software synchronisation.
For compatibility reasons and possible re-use of software blocks, the TV processor is controlled by I2C bus. The TV processor
control registers cannot be read. Only the status registers can be read ( Read address 8A ).
The SECAM decoder contains an auto-calibrating PLL demodulator which has two references, via the divided 12 MHz reference frequency (obtained from the -Controller) which is used to tune the PLL to the desired free-running frequency and the
bandgap reference to obtain the correct absolute value of the output signal. The VCO of the PLL is calibrated during each vertical blanking period, when the IC is in search or SECAM mode.
The base-band delay line (TDA 4665 function) is integrated. This delay line is also active during NTSC reception, to obtain a
good suppression of cross colour effects. The demodulated colour difference signals are internally supplied to the delay line.
APPENDIX
FUNCTIONAL DESCRIPTION
2. IF
The TDA9361/TDA9381 has an alignment free IF PLL demodulator. The fully integrated oscillator is automatically calibrated,
using the 12 MHz crystal as a frequency reference. The IF frequency is simply set in TV-Processor by I2C bus.
The AFC information is available via I2C bus from the TV-Processor status bytes. The controlling software uses this information
for tuner frequency tracking ( automatic following ). The AFC window is typically 125Khz wide. The minimum frequency step of
the tuner is 62.5 kHz.
This AFC function is disabled when a program is tuned using the direct frequency entry or after fine tuning adjustment. Therefore it is recommended to tune a channel with the TV search function ( manual or ATSS ) or by using the direct channel entry to
enable the Automatic Frequency Control.
SAW filters
TF
G1984M
-
SF01
SF02
Ref.
Standard
G1984M
B/G
K2960M
B/G - D/K
J1981M
L9653M
L / L
TK
K2960M
-
TU
J1981M
-
TA
G1984M
L9653M
Features
- IF filter for Intercarrier Applications
- TV IF filter with Nyquist slope and sound shelf.
- High colour carrier level
- Reduced group delay predistortion as compared with standard B/G,
half
- IF filter for Intercarrier Applications
- TV IF filter with Nyquist slope and sound shelf.
- IF filter for Intercarrier Applications
- TV IF filter with Nyquist slope and sound shelf.
- High colour carrier level
- Constant group delay
- Switchable sound filter
APPENDIX
FUNCTIONAL DESCRIPTION
For SECAM L and Lthe TDA9361/TDA9381 is switched to positive modulation via I2C bus. SECAM Ltransmission only occur
in VHF band I and have their picture and sound carrier interchanged, compared to SECAM L and PAL B/G channels. For
SECAM Lthe picture carrier is situated at 33.9 MHz and the AM sound carrier at 40.40 MHz. The IF PLL reference is tuned
from 38.9 to 33.9 MHz, this is done via I2C Bus and the SIF filter is switched from channel 2 to channel 1; this is done by pin 4
of TDA 9361.
The tuner AGC time constant is slower for positive than for negative modulation, because the TDA9361 reduces its AGC current. To make the AGC time constant even slower an extra series resistor R103 is added. To prevent IF overload when jumping
from a very strong transmitter to a weak transmitter a diode D101 has been added
************************************************************************************************************************************************
The SAW filter ( SF1 ) has a double Nyquist slope at 38.9 MHz and 33.9 MHz needed for this multistandard application.
The disadvantage of this choice is that a 5.5 MHz trap filter ( Z501 ) is needed to suppress the residual sound carrier in the
video for B/G signals.
************************************************************************************************************************************************
3. Source switching
Video :
The TDA9361/TDA9381 has only one external video input. The SCART video in pin (#20) is connected to the front RCA video
input.
The controlling software via I2C bus selects the signal source :
- Video signal from tuner ( Pin 40 ).
- External video.
- External SVHS from SCART.
The sound source switching is done in the video processor part and in the AM demodulator by the -Controller via I2C
bus.
The video processor pin 28 has multiple functions and provides in this application
- Deemphasis time constant
- Audio monitor output
- External AM input
- Deemphasis time constant : The time constant is given by the capacitor C504, needed to obtain the 54s time constant
for standard PAL signal.
- Audio monitor output : the nominal output signal is 500 mVrms, for all standards. The signal is also internally connected
through to the audio switch. This signal is not controlled by the volume setting and can be used for SCART audio output.
The signal is buffered to avoid influencing the deemphasis time constant and to adjust the output level.
- External AM input : By software the deemphasis pin can be converted into an input pin. External AM signal for SECAM
L/Lis directly connected to this pin. In this configuration the FM sound is internally muted, DC level remains at 3Vdc.
An external sound signal of 500mVrms is applied to pin 35 via a coupling capacitor. The input impedance of this pin is
25K typical. Switching between internal FM, external AM or external audio from SCART is controlled internally by software.
APPENDIX
FUNCTIONAL DESCRIPTION
Fast R, G, B insertion : The external R, G, B insertion needs a fast switching and cannot be controlled by the software (
instruction cycle of 1 sec ). The fast switching pin 16 of SCART is directly connected to the TV processor pin 45 ( Fast
blanking input ). The display is synchronised with the selected video source, i.e. to get stable R, G, B signal insertion they
must be synchronised with the selected video source.
name
1
2
3
n.u.
SCL
SDA
configuration
Stand by
High impedance
Open Drain
Open Drain
SECAM L
High impedance
OCP
High impedance
High impedance
RF AGC in
High impedance
High impedance
7
8
10
11
62
Key in
S/SW
Red LED
Green LED
Audio mute
High impedance
High impedance
High impedance
Open Drain
Push Pull
High impedance
High impedance
Open Drain
High impedance
High impedance
TV ON
High impedance
Open Drain
Open Drain
Push Pull / High impedance
description
not used
Serial clock line
Serial data line
SIF filter switching + AM/FM
switching
Over Current Protection (
Switch the set OFF if the voltage on this pin is <2.3V )
Used during ATSS to measure
RF signal level.
Local keyboard input
external video switch
APPENDIX
FUNCTIONAL DESCRIPTION
Port configuration
Push Pull
Push Pull
High Impedance
Voltage
Internally shorted to ground
Pull up to 3.3V
Fixed by R511, R156, R157
In FM mode the microcontroller is internally grounded to pin 4. The TDA9830 output is muted
6. Sound amplification
The device TDA7267A is a mono audio amplifier in powerDIP package specially designed for TV application. Thanks to the fully
complementary output configuration the device delivers a rail to rail voltage swing without need of bootstrap capacitors. No
external heat sink is needed as the Cu ground plane of the PCB is used as heat dissipation.
7. Vertical deflection
The vertical driver circuit is a bridge configuration. The deflection coil is connected between the output amplifiers, which are
driven in phase opposition. The differential input circuit is voltage driven. The input circuit is especially intended for direct connection to driver circuits which deliver symmetrical current signals, but is also suitable for asymmetrical currents. The output
current of these devices is converted to voltages at the input pins via resistors R350 and R351. The differential input voltage is
compared with the output current through the deflection coils measured as voltage across R302, which provides internal feedback information. The voltage across R302 is proportional to the output current.
Flyback voltage
The flyback voltage is determined by an additional supply voltage Vfb. The principle of operation with two supply voltages (class
G) makes it possible to fix the supply voltage Vp optimum for the scan voltage and the second supply voltage Vfb optimum for
the flyback voltage. Using this method, very high efficiency is achieved. The supply voltage Vfb is almost totally available as flyback voltage across the coil, this being possible due to the absence of a coupling capacitor.
Protection
The output circuit has protection circuits for :
- Too high die temperature
- overvoltage of output stage A
Guard circuit
The guard signal is not used by the TDA9361/ TDA9381 to blank the screen in case of a fault condition.
Damping resistor
For HF loop stability a damping resistor (R305) is connected across the deflection coil.
APPENDIX
FUNCTIONAL DESCRIPTION
2
D801
C804
D802
C803
D804
R805
D805
R819
C805
D803
L801
R802
C806
Main AC voltage
Drain
Vin
I801 STR-F6653
Ground
5
When the power switch is pushed on, VIN increases slowly. During this time, C806 is charged through R802.
As soon as VIN reaches 16V, the STR-F6653 control circuit starts operating. Then, VIN is obtained by smoothing the winding voltage which appears between pin 6 and pin 7 of the SMPS transformer.
As this winding voltage does not increase to the set voltage immediately after the control circuit starts operating, VIN starts dropping. However, as this winding voltage reaches the set value before VIN voltage drops to the shutdown voltage (at 11V), the control circuit continues operating (see below, VIN voltage at start-up). Resistor R805 prevents variations of voltage at the VIN pin, as
some regulation of the SMPS transformer occurs due to secondary side output current
VIN must be set higher than the shutdown voltage (VIN (off) = 11Vmax) and lower than the O.V.P. (overvoltage protection) operating voltage (VOVP = 20.5Vmin).
APPENDIX
FUNCTIONAL DESCRIPTION
Vin
O.V.P.volt age 20.5V
STR-F6653
Rg2
DRIVE
TO PIN4
SM PS
DRAIN
Rg1
Comp.1
2
V th(1)
OSC
SOURCE
1
1.35mA
OCP/FB
V th(2)
From PIN 6
SM PS
(FEEDBACK)
C850
Comp.2
C1
R808
R1
5
GND
Oscillating operation
R804
APPENDIX
FUNCTIONAL DESCRIPTION
1
C1
(STR -F6653
internal capacitor)
6.5 V
3.7 V
4
2
Pin 1
(OCP / FB)
0.73 V
0V
ID
(M OSFET drain current)
VDS
(M OSFET drain - source voltage)
M O S F E switching
T
ON / OFF
ON
OFF
ON
OFF
ON
OFF
- When the MOSFET is ON, the STR-F6653 internal capacitor C1 is charged at the constant voltage 6.5V.
At the same time, the voltage at pin 1 (OCP / FB) increases with the same waveform as the MOSFET drain current.
- When the pin 1 voltage reaches the threshold voltage VTH1 = 0.73V, the STR-F6653 internal comparator 1 starts operating.
The STR-F6653 internal oscillator is inverted and the MOSFET turns OFF.
- When the MOSFET turns OFF, charging of STR-F6653 internal capacitor C1 is released and C1 starts discharging by the
STR-F6653 internal resistance R1. So, C1 voltage starts falling in accordance to the gradient regulated by the constant discharging time of C1 and R1. So, this means that the fixed time determined by C1 and R1 is the OFF-time of the MOSFET.
- When C1 voltage falls to around 3.7V, the STR-F6653 internal oscillator is reversed again and the MOSFET turns ON. C1 is
quickly charged to around 6.5V
The MOSFET continues to oscillate by repeating the above procedure.
APPENDIX
FUNCTIONAL DESCRIPTION
GND
OUT
3
IN
RESET
PULSE
CIRCUIT
OUT
L511
L512
L510
61
12
54
Vddp Vddc
8V
T801 SMPS TRANSFORMER
2
56
VddA
I501
MICROCONTROLLER PART
SCL
2
SDA
3
L801
D801... D804
(GRAETZ BRIDGE)
D
I702
EEPROM
60
Reset N
CONTROL IC
10
63
Power
APPENDIX
FUNCTIONAL DESCRIPTION
R591
220 W
D591
DZ2.4
R592
Q510
R594
10K W
Q511
+
10k W
R593
10K W
C501
50V
10mF
to I501
pin 60
3.0V
3.3V
1.2V
DC supply voltage
I823 pin 3
0V
3.0V
1.2V
reset pulse
I501 pin 60
0V
11
APPENDIX
FUNCTIONAL DESCRIPTION
6 V DC
I810
CONTROLLED
RECTIFIER
LOW
11V DC
R870
R829
R830
D811
R820
C830
Q 811
LOW
CONDUCT ING
HIGH
Q807
HIGH
Q808
LOW
LOW
Q810
NOT
CONDUCTING
Q809
POWER
H IGH
12
APPENDIX
FUNCTIONAL DESCRIPTION
5V
14.5V (CP785)
12.5V (CP385)
3
I820
5V
REGULATOR
3
I823
3.3V
REGULATOR
1
11V
D860
C861
D820
D830
9
14.5V
12.5V
D831
12
8.5V
8V
13
11.5V
11V
C813
16
143V
123V / 113V
T801 SM PS TRANSFORMER
2
I822
8V
REGULATOR
C823
C832
R823
1
I806
I C ERROR AMPLIFIER
3
2
11V
L801
3
D
SW 801
PO W ER
SW ITCH
I801
MOSFET AND
CONTROL I C
MA I N AC VOLTAGE
8V
143V (CP785)
123V-113V (CP385)
R810
D801... D804
(GRAETZ BRI DGE )
6V
APPENDIX
FUNCTIONAL DESCRIPTION
124V-110V
Remarks
FBT supplies 45V to I301 vertical IC
FBT supplies 14V to I301 vertical IC
FBT supplies 33V to the tuner
FBT supplies 185V to I901 video amplifier pin 6
FBT
13.5V
11V
8V
6V
5V
I601 pin 1
T401 H- drive
I501 Main IC pins 14-39
I703 IR receiver pin 1
I702 EEPROM pin 8
tuner
Main IC com part pins 54-56-61
3.3V
CONDUCTING
AROUND
6V dc
C841
16
R810
R713
I810
CONTROLLED
RECTIFIER
SWITCHING
CIRCUIT
8
D806
L801
SW801
PO WER SWITCH
IR IN 64
C808
DRAIN
IC
R806
OCP
1
FB
3
C850
I804
OPTO
COUPLER
R870
2
61
56
54
D811
KEY IN
FRONT
MASK
BUTTONS
POWER
CONDUCTING
63
Q811
MAIN AC VOLTAGE
mcom
supply
voltage
MAIN
I801
MOF SET AND
CONTROL IC
I703 IR
2 RECEIVER
I501
4
D801...D804
GRAETZ BRIDGE
AROUND
3.3Vdc
D825
T801 SMPSTRANS
2
3
1 I823 3.3V
REGULATOR
C840
HIGH
LOW
HIGH
CONDUCTING
R888
Q810
Q809
LOW
C888
14
APPENDIX
FUNCTIONAL DESCRIPTION
I810
CONTROLLED
RECTIFIER
6V DC
HIGH
R829
R830
R820
C830
HIGH
Q807
Q808
LOW
HIGH
POWER
LOW
Q809
15
APPENDIX
IC DESCRIPTION
1. TDA9361 : TV signal processor - Teletext decoder with embedded -Controller.
TDA9381 : TV signal processor - with embedded -Controller.
TV-signal Processor
Multi-standard vision IF circuit with alignment-free PLL demodulator
Internal (switchable) time-constant for the IF-AGC circuit
Mono intercarrier with a selective FM-PLL demodulator which can be switched to the different FM sound frequencies
(5.5 / 6.0 / 6.5 MHz)
Source selection between 'Internal' CVBS and external CVBS or Y/C signals
Integrated chrominance trap circuit
Integrated luminance delay line with adjustable delay time
Asymmetrical delay line typepeaking in the luminance channel
Black stretching for non-standard luminance signals
lntegrated chroma band-pass filter with switchable centre frequency
Only one reference (12 MHz) crystal required for the -Controller, Teletext and the colour decoder
PAL / NTSC or multistandard colour decoder with automatic search system
Internal base-band delay line
RGB control circuit with 'Continuous Cathode Calibration', white point and black level off set adjustment so that the colour
temperature of the dark and the bright parts of the screen can be chosen independently.
Linear RGB or YUV input with fast blanking for external RGB/YUV sources. The Text/OSD signals are internally supplied
from the -Controller/Teletext decoder
Contrast reduction possibility during mixed-mode of OSD and Text signals
Horizontal synchronisation with two control loops and alignment-free horizontal oscillator
Vertical count-down circuit
Vertical driver optimised for DC-coupled vertical output stages
Horizontal and vertical geometry processing
-Controller
80C51 -controller core standard instruction set and timing
1s machine cycle
64Kx8-bit programmed ROM
3 - 12Kx8-bit Auxiliary RAM (shared with Display and Acquisition)
Interrupt controller for individual enable/disable with two level priority
Two 16-bit Timer/Counter registers
watchdog timer
Auxiliary RAM page pointer
16-bit Data pointer
IDLE and Power Down (PD) mode
8-bit A/D converter
4 pins which can be programmed as general I/0 pin or ADC input.
16
APPENDIX
IC DESCRIPTION
Data Capture
Text memory 10 pages
Inventory of transmitted Teletext pages stored in the Transmitted Page Table (TPT) and Subtitle Page Table (SPT)
Data Capture for 525/625 line WST, VPS (PDC system A) and Wide Screen Signalling (WSS) bit decoding Automatic
selection between 525 WST/625 WST
Automatic selection between 625 WST/VPS on line 16 of VBI
Real-time capture and decoding for WST Teletext in Hardware, to enable optimised -processor throughput
Automatic detection of FASTEXT transmission
Real-time packet 26 engine in Hardware for processing accented, G2 and G3 characters
Signal quality detector for video and WST/VPS data types
Comprehensive teletext language coverage
Full Field and Vertical Blanking lnterval (VBI) data capture of WST data
Display
Teletext and Enhanced OSD modes
Features of lever 1.5 WST.
Serial and Parallel Display Attributes
Single/Double/Quadruple Width and Height for characters
Scrolling of display region
Variable flash rate controlled by software
Enhanced display features including overlining, underlining and italics
Soft colours using CLUT with 4096 colour palette
Globally selectable scan lines per row (9/10/13/16) and character matrix [12x10, 12xl3, 12x16 (VxH)]
Fringing (Shadow) selectable from N-S-E-W direction
Fringe colour selectable
Meshing of defined area
Contrast reduction of defined area
Cursor
Special Graphics Characters with two planes, allowing four colours per character
32 software redefinable On-Screen display characters
4 WST Character sets (GO/G2) in single device (e.g. Latin, Cyrillic, Greek, Arabic)
G1 Mosaic graphics, Limited G3 Line drawing characters
WST Character sets and Closed Caption Character set in single device
Data Capture
The Data Capture section takes in the analogue Composite Video and Blanking Signal (CVBS), and from this extracts the
required data, which is then decoded and stored in memory.
The extraction of the data is performed in the digital domain. The first stage is to convert the analogue CVBS signal into a digital
form. This is done using an ADC sampling at 12MHz. The data and clock recovery is then performed by a Multi-Rate Video
Input Processor (MuIVIP). From the recovered data and clock the following data types are extracted WST Teletext (625/525),
Closed Caption, VPS, WSS. The extracted data is stored in either memory (DRAM) via the Memory Interface or in SFR locations.
17
APPENDIX
IC DESCRIPTION
18
APPENDIX
IC DESCRIPTION
19
APPENDIX
IC DESCRIPTION
OSD languages
Text
DW9361/N1/3-DE1
( note : x is the software
version )
English,
German,
Swedish/Finnish/Hungarian, Italian,
French, Portuguese/Spanish, Turkish, Greek
Russian
No teletext
Chassis
CP 185
CP 185
DW9381/N1/3-DE1
( note : x is the software
version )
PINNING
SYMBOL
SCL
SDA
PIN
1
2
3
SECAM Lout
OCP
RF AGC in
Key-in
S/SW
VssC/P
LED 1
LED 2
VSSA
SEC PLL
VP2
DECDIG
PH2LF
PH1LF
GND3
DECBG
AVL
VDRB
VDRA
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
n.u.
DESCRIPTION
Port 1.3 Not used.
I2C bus clock line
I2C Data line
Port 2.0 : FM sound : PushPull Low
AM SECAM L: PushPull High
AM SECAM L : High Impedance
Port 3.0 : Over Current Protection
ADC 1 : For program sorting in ATSS (High Impedance)
ADC 2 : local key input ( High impedance )
ADC 3 : Scart Slow switching input
digital ground for -controller core and peripheral
port 0.5 ( 8mA current sinking capability )
port 0.6 ( 8mA current sinking capability )
analog ground of teletext decoder and digital ground of TV processor
SECAM PLL decoupling
2nd supply voltage TV-processor
decoupling digital supply of TV-processor
phase-2 filter
phase-1 filter
ground 3 for TV-processor
bandgap decoupling
n.u.
vertical drive B output
vertical drive A output
20
APPENDIX
IC DESCRIPTION
IFIN1
IFIN2
IREF
VSC
TUNERAGC
AUDEEM
DECSDEM
GND2
SNDPLL
SNDIF
HOUT
FBISO
AUDEXT
EHT0
PLLIF
IFVO
VP1
CVBSINT
GND1
CVBS/Y
CHROMA
AUDOUT
INSSW2
R2IN
G2IN
B2IN
BCLIN
BLKIN
R0
G0
B0
VDDA
VPE
VDDC
OSCGND
XTALIN
XTALOUT
RESET
VDDP
Audio Mute
Power
IR in
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
IF input 1
IF input 2
Reference current input
vertical sawtooth capacitor
tuner AGC output
audio deemphasis
decoupling sound demodulator
ground 2 for TV processor
narrow band PLL filter
n.u.
horizontal output
flyback input / sandcastle output
external audio input
EHT/Overvoltage protection
IF PLL loop filter
IF video output
main supply voltage TV-processor
internal CVBS input
ground 1 for TV-processor
external CVBS/Y input
chrominance input (SVHS)
audio out
2nd RGB insertion input
2nd R input
2nd G input
2nd B input
beam current limiter input
black current input
RED Output
GREEN Output
BLUE Output
analog supply of Teletext decoder and digital supply of TV-Processor (3.3V)
OTP programming supply
digital supply to core (3.3V)
oscillator ground supply
crystal oscillator input
crystal oscillator output
reset
digital supply to periphery (3.3V)
Port 1.0 : Audio mute output (PushPull )
Port 1.1 : Power output (PushPull )
Interrupt input 0 : R/C Infrared input
21
APPENDIX
IC DESCRIPTION
22
APPENDIX
IC DESCRIPTION
23
APPENDIX
IC DESCRIPTION
Pinning
Symbol
IFIN
n.c.
CAGC
Pin
1
2
3
Description
Sound IF differential input signal
Not connected
AGC capacitor
CREF
n.c.
AMOUT
AMIN
AFOUT
EXTIN
SWITCH
VP2
5
6
7
8
9
10
11
Not connected
AM demodulator output
Input signal from audio switch
Output signal from audio switch
Input signal (from external) to audio switch
Switch input select control
Supply voltage +12V (alternative)
MUTE
GND
VP1
12
13
Mute control
Ground (0V)
14
15
16
n.c.
IFIN
Block Diagram
24
APPENDIX
IC DESCRIPTION
Pinning
Symbol
Vcc
OUT
SVR
IN
n.c.
S-GND
n.c.
n.c.
P-GND
P-GND
P-GND
P-GND
P-GND
P-GND
P-GND
P-GND
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Description
Supply voltage
Audio output
Supply Voltage Rejection
Audio input
Not Connected
Signal ground
Not Connected
Not Connected
P Ground
P Ground
P Ground
P Ground
P Ground
P Ground
P Ground
P Ground
25
APPENDIX
IC DESCRIPTION
Pinning
Pin
1
2
3
Symbol
Vi(pos)
Vi(neg)
Vp
VOB
Description
input voltage (positive)
input voltage (negative)
supply voltage
ground
flyback supply voltage
GND
Vflb
VOA
VO(guard)
VM
4
5
6
output voltage B
output voltage A
26
APPENDIX
IC DESCRIPTION
5. TDA6107Q
The TDA6107Q includes three video output amplifiers in one plastic DIL-Bent-SIL 9-pin medium power package, using high
voltage DMOS technology, and is intended to drive the three cathodes of a colour CRT directly. To obtain maximum performance, the amplifier should be used with black-current control.
Features
- Typical bandwidth of 5.5 MHz for an output signal of 60 Vpp
- High slew rate of 900V/s
- No external components required
- Very simple application
- Single supply voltage of 200V
- Internal reference voltage of 2.5 V
- Fixed gain of 50.
- Black-current stabilisation (BCS) circuit
- Thermal protection
Pin description
Pin
1
Symbol
Vi(1)
Description
inverting input 1
Vi(2)
inverting input 2
Vi(3)
inverting input 3
ground (fin)
GND
Iom
VDD
supply voltage
VOC(3)
cathode output 3
VOC(2)
cathode output 2
VOC(1)
cathode output 1
27
APPENDIX
IC DESCRIPTION
Name
E0, E1, E2
SDA
SCL
WC
Vcc
Vss
Description
Device address
Serial Data/Address Input/Output
Serial clock
Write control
Supply voltage
Ground
The memory device is compatible with the I2C memory standard. This is a two wire serial interface that uses a bi-directional
data bus and serial clock. The memory carries a built-in 4-bit unique device type identifier code (1010) in accordance with the
I2C bus definition.
Serial Clock (SCL)
The SCL input is used to strobe all data in and out of the memory.
Serial Data (SDA)
The SDA pin is bi-directional, and is used to transfer data in or out of the memory
7. STR - F6653
7-1. general description
The STR-F6653 is an hybrid IC with a build-in MOSFET and control IC, designed for flyback converter type switch mode power
supply applications.
7-2. features
- Small SIP fully isolated moulded 5 pins package
- Many protection functions :
Pulse-by-pulse overcurrent protection (OCP)
Overvoltage protection with latch mode (OVP)
Thermal protection with latch mode (TSD)
28
APPENDIX
IC DESCRIPTION
NAME
Overcurrent feedback
Source
Drain
DESCRIPTION
Input of over current detection signal and feedback signal
Mosfet source
Mosfet drain
Supply
SYMBOL
O.C. P/E.B.
S
D
VIN
4
5
Ground
GND
Ground
29
APPENDIX
IC DESCRIPTION
DESCRIPTION
SYMBOL
RATING
TYPE
MIN.
UNIT
MAX
4-5
VIN (on)
14.4
16
17.6
4-5
VIN (off)
10
111
4-5
IIN (on)
30
mA
4-5
IIN (off)
100
TOFF (max)
45
55
SEC
1-5
TTH (2)
1.0
SEC
TOFF (min)
1.5
SEC
1-5
VTH (1)
0.68
0.73
0.78
1-5
VTH (2)
1.3
1.45
1.6
1-2
IOCP/FB
1.2
1.35
1.5
mA
4-5
VIN (OVP)
20.5
22.5
24.5
4-5
IIN (H)
400
4-5
VIN (Loff)
6.6
8.4
Tj (TSD)
0C
140
IC PINS
NUMBER
SYMBOL
MIN.
RATING
TYPE
MAX
3-2
VDSS
650
3-2
IDSS
300
On-resistance
3-2
RDS (on)
1.95
Switching time
3-2
tf
OCH - F
250
noec
0.95
0C/W
Thermal resistance
30
UNIT