Vous êtes sur la page 1sur 1

DRILLRIG SPECIFICATION

Simba 260-series
20o

Simba 264

Simba 263

700

80o

1670

2200

1915

Simba 262
1990

1350

1350

1960

6520-6525 (BMH 264)


1810

Main optional equipment

90 degree turned feed holder


45 degree tilt angle forward
Angle reading instrument ARI 6C
Hole depth measurement
Automatic lub. for positioning system
Central lub. for positioning system
Dry drilling system with dust collector
ECS drilling system
One hole automatics for RHS
Rod handling system RHS 17/RHS 27
Additional stinger forward on feed BSJ8-115
Additional stinger backward on feed BSJ8-200
Rig alignment laser RAL 650
Water mist ushing
El hydraulic oil lling pump
Heater for hydraulic tank
Heater kit for hydraulic tank, diesel motor and and electrical motors
Exhaust water scrubber
Exhaust catalyzer
Fire suppr. system ANSUL with 6 nozzles
Carrier DC11E electro hydraulic tramming
Electrical system 1000 V, direct start only
Manual rig washing kit with hose and reel
Manual lubrication kit, grease gun with hose, reel and drum
Floating sub on rotation unit

UNDERGROUND MINING EQUIPMENT

1500
1925

750

550

1500

45o

45o

1590

235

1350

240

1150

45

Simba 254
750
550

1500

240

45

1350

1 x 34, 44, 54, 64


1 x DHR 48H56
1 x 264, 265, 266
1 x BHR 30
1 x BHT 15 (Simba 263 and 264)
1 x BSJ8-115E
1 x BSH 65
BHP 10 (Simba 262 and 264)
1 x 45 KW
EDS
6500-6525 mm
1925/2380 mm
2660/2770/2810 mm
2900 mm
5100/2500-2700 mm
11300 kg

1150

Rock drill
Rotation unit
Feed
Rotary actuator
Slide table
Stinger backward on feed
Breakout table
Pendulum arm
Power pack
Drilling system
Length tramming (BMH 264)
Width
Height tramming
Height roof up
Turning radius
Gross weight (basic rig+RHS)

Simba 253

550

750 750

325

Simba 252

325

Main specications Simba 260-series

1350

High capacity drilling with the proven ITH hammers


in combination with EDS 46 drilling system that includes
semi-automatic control of drill sequence, automatic antijamming system minimizes the risk for drill steel to get
stuck during drilling, and controls also drill parameters
all the time.
Pneumatic ITH rock drills COP 34, 44, 54 or 64 with pressure up to 25 bar for high productivity and excellent
hole straightness.
EDS 46 is a control system based on relays and robust
ON/OFF valves, easy to handle and maintain.
BMH 260 heavy-duty aluminium hydraulic feeds with
double bottom for high torsional resistance. Snap-on
stainless steel sleeves and polymer contact pads for
long service life and low maintenance cost. Feed cylinder of two-steps model and the complete design of
the feed provide smooth, steady and adjustable feed
force/speed and also accurate collaring plus high
reliability.
Hydraulic rod breaking unit, BSH 65, provides efcient
guidance and safe rod adding/handling of drill steel.
Rod handling system RHS, optional, can be added for
rapid penetration as well as elimination of heavy
manual work.
Rigs can be built for ring-drilling, fan-drilling or benchdrilling with a 1.5 m parallel-hole capability (Simba 262/
263) or 3.0 m capability (Simba 264).

1150

Features

Sturdy, articulated carrier with four-wheel drive for


easy manoeuvring in narrow drifts and steep ramps.
Power steering, fail-safe brakes and central lubricated
chassis. Powered by a air-cooled 5-cylinder, Deutz
engine. Four jacks for stable set up.
Operator controls are cart-mounted and can be set up
at a convenient distance from the rig. Easy to monitor
rig parameters such as pressures and tilt/rotation
angles and gives good overview of rod handling etc.

325

Pneumatic ITH production drill rigs. Hole diameter range


85-165 mm.

800

1500

1925

1925

2380

2380

800

Visit www.atlascopco.com/mining for more information


??

Vous aimerez peut-être aussi