Académique Documents
Professionnel Documents
Culture Documents
Catalog 0620-E/USA
May 2005
Index
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users having technical expertise. It is important that you analyze
all aspects of your application including consequences of any failure, and review the information concerning the product or
system in the current product catalog. Due to the variety of operating conditions and applications for these products or
systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products
and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this
document entitled Offer of Sale.
Copyright 2004, Parker Hannifin Corporation. All Rights Reserved
Pneumatic
Catalog 0620-E/USA
Table of Contents
T Series
Features, Model Number Index ............................................................................. 2
Model Selection, Dimensions ................................................................................ 3
Cross Reference Information ................................................................................ 4
GG Series
Basic Valve Features ............................................................................................ 5
Single Solenoid ..................................................................................................... 6
Historical Model Number Index ............................................................................. 6
Model Selection ..................................................................................................... 7
Cross Reference Information ................................................................................ 8
SS Series
Basic Valve Features ............................................................................................ 9
Historical Model Number Index ........................................................................... 10
Single & Double Solenoid 2-Position .................................................................. 11
Double Solenoid 3-Position .................................................................................12
Historical SS Series
Single & Double Air Operated 2-Position ............................................................ 13
Historical Dimensions
2-Position (SS1200 / SS1400) ............................................................................ 14
Manifold
SSX & SSW ..................................................................................................... 15
SSA ................................................................................................................... 16
Technical Information ............................................................................................... 17
Dimensions
2-Position ............................................................................................................ 18
3-Position ............................................................................................................ 18
Service Kits / Part Identification ......................................................................... 19-23
Cross Reference Information
SS Series .................................................................................................... 24-30
Offer of Sale ............................................................................................................. 31
Pneumatic
T Series Valves
3-Way, 3-Port, 2-Position Single Solenoid
Catalog 0620-E/USA
Operation
Valve will operate mounted in any position. See mounting
dimensions and port locations.
Selection table shows typical piping connections and
maximum pressure differentials for each model number.
Maximum Pressure Differential is the maximum allowable
difference between pressures recorded at any two working
ports of the valve. The highest pressure that may be
connected to any port is 150 PSI.
For 2-Way operation, plugs must be screwed in and sealed
bubble tight for valve to work properly.
Specifications
Operator
Port
Size
Lower
Orifice Size
Spring
Top
Orifice Size
Coil
Option
Modification
200
25
01
M16
Operator
200 Standard
210 Manual Override
Lower
Orifice Size
Top
Orifice Size
D 1/16"
H 1/8"
F 3/32"
Modification
M16 72" Leads
M25 72" Leads &
Top Seat w/o
Shading Coil
Coil Option
Basic Series
T Not Lighted
TL Lighted
Port Size
Spring
25 1/4" NPT
1 0.5 lb.
2 1.5 lb.
Pneumatic
Suffix
Voltage / Hertz
01
02
15
20
21
22
23
34
58
59
63
120 / 60
240 / 60
48 VDC
24 / 60
12 VDC
24 VDC
125 VDC
150 / 60
250 VDC
120 / 50
240 / 50
Parker Hannifin Corporation
Pneumatic Division North America
Richland, Michigan
www.parker.com/pneumatic
Index
T Series Valves
3-Way, 3-Port, 2-Position Single Solenoid
Catalog 0620-E/USA
Maximum
Pressure
Differential
Minimum
Orifice Dia.
Between Ports
X &Y
Cv Capacity Coefficient
For Flow Between Ports
Y&Z
Piping Connections
Port X
Port Y
Port Z
Standard
2-Way
Normally
150
50
1/16"
1/8"
0.09
0.22
Inlet
Inlet
Outlet
Outlet
Plugged
Plugged
T20025D2F01
T20025H2F01
2-Way
Normally
Open
150
3/32"
0.16
Plugged
Inlet
Outlet
T20025H2F01
3-Way
Normally
Closed
150
50
1/16"
1/8"
3/32"
3/32"
0.09
0.22
0.16
0.14
Inlet
Inlet
Outlet
Outlet
Exhaust
Exhaust
T20025D2F01
T20025H2F01
Part No.
60 HzAC
50 HzAC
DC
P4615401
120V
110V
D2F/H2F PS5399
P4615402
240V
220V
P4615421
12V
P4615422
24V
2
7
3
4
Dimensions T200
C
Port Z
A
B
C
D
inches 1.59 3.31 2.25 .88
mm
40
84
51
22
E
.88
F
.09
G
.50
H
.50
22
2.4
14
13
D A
Port Y
Port X
X Port &
Elec.
Conduit
B
G (Y & Z
Ports)
H
F
1/2 NPSM
Conduit Connection
Pneumatic
1/4 NPT
3 Places
10-32UNF
2 Holes
Index
Catalog 0620-E/USA
(Revised 03-29-07)
Index
T Series Valves
Cross Reference
Suggested Functional Replacement - Cyclone Series
2-Way NC
2-Way NO
3-Way NC
3-Way NO
Discontinued
T Valve Number
Suggested T Valve
Replacement or Kit
T20025D1F01
T20025D1F21
T20025D1F22
T20025D2F01M16
741140115B
741140122B
741140123B
741140115B
T20025D2F15
T20025D2F20
T20025D2F21M25
T20025H1F01
T20025H1F02
T20025H1F15
T20025H1F20
T20025H1F21
741140116B
740120116B
NO CROSS REFERENCE VOLTAGE IS 48 VDC
741140113B
740120113B
741140122B
740120122B
T20025H1F22
T20025H1F23
T21025D1F01
T21025D2F01
741140123B
740120123B
742110123B
NO CROSS REFERENCE VOLTAGE IS 125 VDC
741140115B
741140115B
744130115B
4
2
2
T21025D2F02
T21025D2F15
T21025D2F20
T21025D2F21
T20025D2F02 no override
Coil P4615415 & PS5399 Kit
Coil P4615420 & PS5399 Kit
T20025D2F21 no override
741140116B
744130116B
NO CROSS REFERENCE VOLTAGE IS 48 VDC
741140113B
744130113B
741140122B
744130122B
2
4
2
2
T21025D2F22
T21025D2F23
T21025H1F01
T21025H1F02
T20025D2F22 no override
Coil P4615423 & PS5398 Kit
Coil P4615401 & PS5398 Kit
Coil P4615402 & PS5398 Kit
741140123B
744130123B
NO CROSS REFERENCE VOLTAGE IS 125 VDC
741140115B
740120115B
742110115B
741140116B
740120116B
742110116B
2
4
2
2
T21025H1F22M16
T21025H2F01
T21025H2F02
T21025H2F22
741140123B
741140115B
741140116B
741140123B
TL20025D2F01
TL20025H1F01M16
TL21025D2F01
TL21025D2F01M16
T20025D2F01 no light
Coil P4615401 & PS5398 Kit
T20025D2F01 no light/override
T20025D2F01 no light/override 18"
741140115B
741140115B
741140115B
741140115B
741140115B
Notes
744130115B
740120115B
740120123B
740120115B
740120116B
740120123B
1
4
742110115B
742110116B
4
742110113B
742110122B
742110123B
1, 2
744130115B
744130116B
744130123B
744130115B
740120115B
742110115B
744130115B
741130115B
3
1, 3
2, 3
1, 2, 3
Notes
1. The M16 Modification is 72" leads. The valve selected has 19" leads.
2. The T210 valve has a Non-Locking Manual Override. The valve selected has no Override.
3. The TL valve had an Indicator Light. The valve selected has No Light.
4. Use Repair Kits to Service Valve.
Pneumatic
Catalog 0620-E/USA
Index
GG Series Valves
Air Control Valves
Pneumatic
Index
GG Series Valves
4-Way, 4-Port, 2-Position
Catalog 0620-E/USA
Single Solenoid
Application
These valves are used to operate double acting cylinders.
They may also be used as 2-Way or 3-Way valves by
plugging ports. Valves are actuated by a maintained electrical
contact.
Mounting
These valves are designed for inline mounting.
Operation
De-energized P to 02 - 01 to E.
Energized/Pressurized P to 01 - 02 to E.
01 02
Single
Solenoid
Valve
Model Number
Solenoid
GG20025B01
Indicator
Light
Valve
Function
Porting
Port
Size
Engineering
Level
Voltage
Modification
GG
20
25
01
Indicator Light
Porting
Engineering Level
B Current
Valve Function
Port Size
Modification
25 1/4 inch
Blank No Modification
M01 Non-Locking Manual
Override with
72 inch Leads
M02 Non-Locking Manual
Override
M03 Locking Manual Override
with 72 inch Leads
M04 Knob Type Non-Locking
Manual Override
M05 Knob Type Locking
Manual Override
M06 Knob Type Locking
Manual Override
with 72 inch Leads
M13 Locking Manual Override
M16 72 inch Leads
Voltage / Frequency
Suffix
01
02
15
20
21
22
23
58
59
120V
240V
24V
110V
220V
22V
120V
DC
48V
12V
24V
125V
250V
Pneumatic
60Hz. 50Hz.
GG Series Valves
Dimensions, Ordering Information
Catalog 0620-E/USA
Model Selection
Inline Side Ports 1/4" NPT
Dimensions:
A
inches mm
3.44 87
F
IN
3.88
99
.99
25
.50
13
2.75
70
.88
22
1.00
25
1.95
50
.28
1.44
37
3.50
89
1.60
41
.19
P
Q
Dia.
.70
P
EXH
CYL 2
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
CYL 1
F
N
1/2 NPSF
B
17
CYL 2
14
15
16
17
18
CYL 1
.28
K H
7
A
19
20
21
22
23
24
25
26
27
28
29
30
31
4
3
1
2
Description
Solenoid Assembly
Solenoid Cover with captive mounting screws
Solenoid Coil
Flux Sleeve
Compression Gasket
Top Seat
Small O-ring for top seat
Large O-ring for top seat
Solenoid Plunger Assembly
O-ring for coil
Flux Plate
O-ring for flux plate
Molded Gasket for solenoid cover to
conduit adapter
Spring for plunger
Conduit Adapter Assembly
Conduit Body
Electrical Leads
Mounting Screws - conduit body to valve body
(not shown)
Valve Body Assembly
Valve Body
Return Spring
Spring Guide Pin
Molded Gasket for valve body to conduit body
Stem Assembly
Lip Seal
Molded Gasket for end cap to valve body
End Cover
Mounting Screws - end cap to valve body
(not shown)
Solenoid Coil With Indicator Lamp
Solenoid Cover With Lens Assembly
Cover Mounting Screws (not shown)
9
10
30
11
Non-locking type
is without a slot.
12
31
13
17
Figure 2:
Flush Style Manual Override
14
29
15
16
28
Figure 4:
Indicator Lamp
27
26 25
24
23
18
22 21
Figure 3:
Knob Style Manual Override
Pneumatic
Index
Index
GG Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete GG Valve
Suggested Replacement
Notes
GG20025B01M01
GG20025B01M03
GG20025B01M04
GG20025B01M06
F3E12BGB23A
F3E12BHB23A
F3E12BJA23A
F3E12BGB23A
GG20025B01M02
GG20025B01M13
GG20025B01M02
GG20025B01M05
3
3
4
3
GG20025B01M16
GG20025B02M01
GG20025B02M03
GG20025B15
F3E12BGB23A
F3E12BGB87A
F3E12BHB87A
NO CROSS VOLTAGE 48VDC
GG20025B01
GG20025B02M02
GG20025B02M05
N/A
3
3
3, 5
2
GG20025B20
GG20025B22M01
GG20025B22M04
GG20025B22M16
F3E12BGA12A
F3E12BGB19A
F3E12BJA19A
F3E12BGB19A
N/A
GG20025B22M02
GG20025B22M02
GG20025B22
2
3
4
3
GG20025B23
GG20225B01
GG20225B01M01
GG20225B01M02
2
1
1
1
N/A
N/A
N/A
N/A
2
2
2
2
GG20225B01M03
GG20225B01M05
GG20225B01M06
GG20225B01M16
F3E52BHB23A
F3E52BKA23A
F3E52BKB23A
F3E52BGB23A
1
1
1
1
N/A
N/A
N/A
N/A
2
2
2
2
GG20225B02M05
GG20225B02M05
GG20225B21
GG20225B22
F3E52BKA87A
F3E52BKA87A
F3E52BGA15A
F3E52BGA19A
1
1
1
1
N/A
N/A
N/A
N/A
2
2
2
2
GG20225B22M01
GG20225B22M04
GG20225B22M04
GGL20025B01
F3E52BGB19A
F3E52BJA19A
F3E52BJA19A
F3E12BGA23A
1
1
1
N/A
N/A
N/A
GG20025B01
2
2
2
6
GGL20025B01M01
GGL20025B01M02
GGL20025B01M05
GGL20025B01M13
F3E12BGB12A
F3E12BGA23A
F3E12BJA23A
F3E12BKA23A
GGL20025B02
GGL20225B01M02
GGL20225B01M06
F3E12BGA87A
F3E52BGA23A
F3E52BKB23A
Alternate GG Valve
GG20025B01M02
GG20025B01M02
GG20025B01M05
GG20025B01M05
1
1
Notes
3, 6
6
6
6
GG20025B02
N/A
N/A
6
2
2
Notes
1. The GG202 Valve is a Bottom Ported Valve for Manifold Mounting. Review of Application is Required. The F3 Valve Selected is a Valve
Attached to a Manifold Base.
2. Use Repair Kits to Service the Valve.
3. The GG Valve selected has 18" Leads instead of 72" Leads.
4. Flush type override instead of Knob type.
5. Knob type override instead of Flush type.
6. The same without lights
Pneumatic
Catalog 0620-E/USA
Index
SS Series Valves
Air Control Valves
Pneumatic
Index
SS Series Valves
Air Control Valves
Indicator
Light
Valve
Operator
Options
Functions
Port
Size
Voltage /
Frequency
Modification
SS
20
37
01
M1
Indicator Light
L
Light Required
Blank No Light
Basic Series
SS
Options
Port Size
0 No Manual Overrides
1 Non-Locking Manual
Overrides, Flush Type
2 Locking Manual
Overrides, Flush Type Screwdriver Slot
3* 72" Electrical Leads,
No Overrides
4* 72" Electrical Leads,
Non-Locking Overrides Flush Type
5* 72" Electrical Leads with
Locking Overrides, Flush
Type - Screwdriver Slot
6* 72" Electrical Leads with
Non-Locking Overrides,
Knob Type
7 Non-Locking Manual
Overrides, Knob Type
(2-Position Only)
8 Locking Manual
Overrides, Knob Type
(2-Position Only)
9* 72" Electrical Leads,
Locking Manual
Overrides, Knob Type
(2-Position Only)
Voltage / Frequency
Class B Solenoid
Suffix
01
02
15
20
21
22
23
34
54
57
58
59
60Hz. 50Hz.
120V
240V
24V
150V
10V
110V
220V
22V
120V
DC
48V
12V
24V
125V
185V
250V
Modification
Blank No Modification
(3-Position Only)
M1 Bottom Ported, External
Supply and Electrical
Connection to Plug-in
Manifold
M2 Manual Override at
Conduit End Only - 4000
Series Only
M4 Manual Override Opposite
Conduit End Only - 4000
Series Only
M5 Remote Pilot Supply to
Conduit Vacuum and Low
Pressure Service
Valve Operator
12 Single Air Pilot, Spring Return,
2-Position
14 Double Air Pilot, Detented,
2-Position
15 Double Air Pilot, Spring
Centered, All Ports Blocked,
3-Position
16 Double Air Pilot, Spring
Centered, Cylinder Ports Open
to Red and Black, 3-Position
20 Single Solenoid, Spring Return,
2-Position
40 Double Solenoid, Detented,
2-Position
50 Double Solenoid, Spring
Centered, All Ports Blocked,
3-Position
60 Double Solenoid, Spring
Centered, Cylinder Ports Open
to Red and Black, 3-Position
Pneumatic
Index
SS Series Valves
4-Way, 5-Port, 2-Position
Catalog 0620-E/USA
Red
Solenoid
Location
Black
Solenoid
Location
SS4010
SS2010
Application
Application
Operation
Operation
02
01
RED BLK
02
01
RED BLK
RED
BLK
RED P BLK
RED P BLK
Port Size
Port Size
3/8" NPT
1/2" NPT
Port Size
Valve/Inline Mounted
Model Number
Side Ported
Side Ported
SS20103701
SS20105001
Valve/Add-A-Fold Base
Model Number
SSA20123701
3/8" NPT
1/2" NPT
Port Size
11
Pneumatic
Valve/Inline Mounted
Model Number
Side Ported
Side Ported
SS40103701
SS40105001
Valve/Add-A-Fold Base
Model Number
SSA40123701
Index
SS Series Valves
4-Way, 5-Port, 3-Position
Catalog 0620-E/USA
Double Solenoid
SS5010 / SS6010
Application
This inline mounted valve is used to operate a double acting
cylinder. It is a 4-Way, 3-Position, 5-Ported, double solenoid
pilot operated, maintained contact, spring centered, and can
be serviced without disturbing piping or wiring. Recessed
non-locking manual override is standard, locking overrides
available. They also may be used for 2-Way, 3-Way, and dual
pressure service.
Operation
SS5000 Series: All ports blocked in center position.
SS6000 Series: Pressure port P blocked in center position.
Cylinder ports 01-RED and 02-BLK open to exhaust
ports RED and BLK.
01 02
RED BLK
01 02
RED BLK
RED P BLK
RED P BLK
SS5000 Series
SS6000 Series
Port Size
Port Size
3/8" NPT
1/2" NPT
Port Size
Valve/Inline Mounted
Model Number
Side Ported
Side Ported
SS50103701
SS50105001
Valve/Add-A-Fold Base
Valve Assembly, Less Base
3/8" NPT
1/2" NPT
Model Number
Side Ported
Side Ported
SS60103701
SS60105001
Model Number
SSA50123701
12
Pneumatic
Valve/Inline Mounted
Index
SS Series Valves
4-Way, 5-Port, 2-Position
Catalog 0620-E/USA
SS1210
SS1410
Application
Application
Operation
Operation
D
E
U
N
I
T
3
N
0
0
O
2
/
C
0
S
I
3
/
D 11
02
01
RED BLK
02
01
RED BLK
X1
X1
RED P BLK
X2
RED P BLK
Port Size
1/4" NPT
3/8" NPT
1/2" NPT
Port Size
3/8" End Ports
3/8" End Ports
Valve/Inline Mounted
Model Number
Side Ported
Side Ported
Side Ported
SS121025
SS121037
SS121050
Valve/Add-A-Fold Base
Model Number
SSA121237
Port Size
1/4" NPT
3/8" NPT
1/2" NPT
Port Size
3/8" End Ports
SSX121237
3/8" End Ports
SSW121237
13
Pneumatic
Valve/Inline Mounted
Model Number
Side Ported
Side Ported
Side Ported
SS141025
SS141037
SS141050
Valve/Add-A-Fold Base
Model Number
SSA141237
SSX141237
SSW141237
Catalog 0620-E/USA
Dimensions
Index
SS Series Valves
2-Positions
SS1200 / SS1400
Single & Double Air Operated Valves
V
2 Locations
X2
1/4 NPTF
X1
1/4 NPTF
E
H
02 BLK
01 RED
D S
B
RED
F J
BLK
F1
C2 W/O.R.
C W/O.R.
C1 WO/O.R.
02 BLK
D
E
01 RED
RED
BLK
U
N
I
T
3
N
0
0
O
2
/
C
0
S
I
3
/
D 11
M
L
L1
Dimensions:
Dimensions:
inches
2.56
mm
65
2.66
68
L1
inches
2.55
mm
65
.91
23
1 "
4
5.80
147
N /
2.00
51
C1
4.96
126
N 3/8"
2.13
54
C2
6.68
170
N 1/2"
2.25
57
2.00
51
O 1/4"
1.06
27
3.88
98
O 3/8"
1.19
30
.53
13
O 1/2"
1.31
33
F1
1.39
35
1.69
43
G*
1.35
34
1.19
30
H*
1.19
30
.41
10
J*
.88
22
.25
K*
1.06
27
.28
2.47
63
14
Pneumatic
Index
SS Series Valves
SSX & SSW Series
Catalog 0620-E/USA
Manifold
Application
The Parker SA Add-A-Fold system permits assembly of
many valves and their Add-A-Fold bases into one manifold
system. Each Add-A-Fold assembly requires only one
supply connection. Supply and exhaust connections are
made by bolting the desired valve to its Add-A-Fold base
section. Outlet connections are made to each Add-A-Fold
station.
Electrical connections are made to separate valves through
a common junction box at one end of the manifold.
Each Add-A-Fold base will accept any SSA Series Valve
and gasket:
Single Solenoid
Double Solenoid
Features
D
E
U
N
I
T
3
N
0
0
O
2
/
C
0
S
I
3
/
D 11
SA1110
(SSX)
SA1140
(SSW)
15
Pneumatic
Index
SS Series Valves
SSA Series
Catalog 0620-E/USA
Manifold
Both the SA1110 and SA1140 Add-A-Fold bases are
available with bottom porting on the pressure port, enabling
you to bring separate pressures into individual stations. This
is accomplished by regulating pressure into the isolated base.
This feature now enables the SS Manifold to be worked at
individual pressures.
SSX20113701
SSW20113701
Minimum
Operating
Pressure
25 PSIG
D
E
U
N
I
T
3
N
0
0
O
2
/
C
0
S
I
3
/
D 11
Optional Separate
Exhaust Ports
3/8 NPTF
1-1/4 NPSM
80 PSI
50 PSI
60 PSI
2.50
1.97
1.25
.53
FRONT VIEW
.53
2.09
.75
Each
Plate
PS5403
(2 Reqd)
2.63
1.25
40
20
60
80
1/4 NPTF
5.75
140
160
2.62
100
120
.75
.16
MANIFOLD
(BOTTOM VIEW)
16
Pneumatic
Index
SS Series Valves
Technical Data
Catalog 0620-E/USA
Technical Information
Operating Pressure
Valve
Port Size
3/8"
1/2"
Fill
Exhaust
Fill
Exhaust
.049
.026
.091
.052
.233
.172
.437
.307
* With 100 PSI supply, time required to fill from 0-90 PSI and exhaust
from 100 PSI to 10 PSI is measured from instant of energizing, or
de-energizing 120V/60Hz solenoid. Times shown are average.
Temperature
Ambient
Continuous Duty
Intermittent Duty
Minimum
Maximum
0F (-18C)
0F (-18C)
140F +60C).
140F +60C).
3/8"
1/2"
Fill
Exhaust
Fill
Exhaust
.051
.038
.089
.058
.247
.176
.428
.322
* With 100 PSI supply, time required to fill from 0-90 PSI and exhaust
from 100 PSI to 10 PSI is measured from instant of energizing, or
de-energizing 120V/60Hz solenoid. Times shown are average.
Coil Selection
Lubrication
Class B
60Hz.
50Hz.
DC
01
120VAC
110VAC
22
24VDC
Fill
Exhaust
.064
.049
.092
.045
.024
.185
.427
.345
* With 100 PSI supply, time required to fill from 0-90 PSI and exhaust
from 100 PSI to 10 PSI is measured from instant of energizing, or
de-energizing 120V/60Hz solenoid. Times shown are average.
Pneumatic
3/8"
1/2"
3/8"
1/2"
02-BLK
1.9
2.2
1.7
2.2
01-RED
1.7
2.1
1.6
2.1
02-BLK
BLK
1.6
1.9
1.6
1.9
01-RED
RED
1.4
2.2
1.4
2.0
1.7
2.1
1.6
2.0
Avg.
17
3-Position
Fill
2-Position
Index
SS Series Valves
2-Position / 3-Position
Catalog 0620-E/USA
Dimensions
SS5000/SS6000
Double Solenoid Valve
SS2000/SS4000
Single & Double Solenoid Valves
1/2 NPSM
02 BLK
01 RED
D S
F J
R
P
SOL
BLK
SOL
BLK
RED
BLK
RED
F1
01 RED
F1
RED
BLK
F J
C2 W/O.R.
C W/O.R.
C1 WO/O.R.
02 BLK
E
H
D S
R
V
2 Locations
SOL
RED
02 BLK
01 RED
SOL
RED
1/2
NPSM
E
H
V
2 Locations
C W/O.R.
C1 WO/O.R.
BLK
02 BLK
01 RED
RED
BLK
M
N
L
L1
Dimensions:
Dimensions:
Dimensions:
inches
2.56
mm
65
L1
4.63
118
inches
2.55
.91
mm
65
23
Dimensions:
inches
2.56
mm
65
inches
.91
mm
23
4.63
118
N 1/4"
2.00
51
3 "
8
5.80
147
N 1/4"
2.00
51
8.20
208
N /
2.13
54
C1
4.96
126
N 3/8"
2.13
54
C1
8.20
208
N 1/2"
2.25
57
C2
6.69
170
N 1/2"
2.25
57
2.00
51
O 1/4"
1.06
27
2.00
51
O 1/4"
1.06
27
3.88
98
O 3/8"
1.19
30
3.88
98
O 3/8"
1.19
30
2.16
55
O 1/2"
1.31
33
.53
13
O 1/2"
1.31
33
G*
1.35
34
1.69
43
F1
1.39
35
1.69
43
H*
1.19
30
1.19
30
G*
1.35
34
1.19
30
J*
.88
22
.41
10
H*
1.19
30
.41
10
K*
1.06
27
.25
J*
.88
22
.25
2.55
65
.28
K*
1.06
27
.28
2.47
63
18
Pneumatic
Index
SS Series Valves
4-Way, 5-Port, 3-Position
V-250D
PS5396
Item #
PL5178
PL5185
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description
External Pilot Cover
Screw - body/cover
Molded Gasket - valve body to cover
Valve Body Assembly
Valve Body
End Cap
Return Spring
Seal - cover
Lipseal
Sleeve
Stem
O-ring - sleeve
Piston
Washer
Screw - valve body to end cap
(not shown)
Locking Type
Non-Locking Type
4
5
8 9 10
11
19
Pneumatic
12
13
14
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
CAUTION:
Before attaching the external pilot cover, make sure that
the molded gasket is positioned properly in its gasket track.
PS5394
PS5395
PL5167B
PL5168B
Description
Valve Body
Return Spring
Stem Assembly
Piston
Lip Seal
Mounting Screws - end cap to valve body
End Cap Assembly with override
Seal for end cap
Molded Gasket for valve body to cover
Plug - 3/16" Dia. Rubber Ball
Polyurethane Check Ball - 1/8" Dia.
Wire Clip
External Pilot Cover
Mounting Screw - cover to valve body
End Cap - return spring end
Detent Wire
Rubber Ball
Non-Locking Override
Locking Override
11
10
12
13
17
15
1
14
5 4
KNOB STYLE
MANUAL OVERRIDE
V-251D
Index
SS Series Valves
4-Way, 5-Port, 2-Position
Catalog 0620-E/USA
SS1200
19
16
20
Pneumatic
18
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PS5394
PS5397
PL5167B
PL5168B
2 1
12
18
13
14
21
17
16 15
22
23
Solenoid Assembly
Solenoid Cover with captive mounting screws
Solenoid Coil
Flux Sleeve
Compression Gasket
Top Seat
Small O-ring for top seat
Large O-ring for top seat
Solenoid Plunger
O-ring for coil
Flux Plate
O-ring for flux plate
Seal for solenoid cover to conduit adapter
Spring for plunger
Conduit Adapter Assembly
Conduit Body
Leads
Mounting Screws (#10-24x1) - conduit body to
valve body (not shown)
Valve Body Assembly
Valve Body
Molded Gasket for valve body to conduit body
Seal for end cap
End Cap - return spring end
End Cap Assembly with override - piston end
Return Spring
Wire Clip
Polyurethane Check Ball - 1/8" Dia.
Stem Assembly
Plug - 3/16" Dia. Rubber Ball
Piston
Lip Seal
Mounting Screws - end cap to valve body
11
Description
10
24
19
20
21
22
23
24
25
26
27
28
29
30
31
32
V-253C
Index
SS Series Valves
4-Way, 5-Port, 2-Position
Catalog 0620-E/USA
32 22 31 30
29 28 27 26
19 20 25
21
Pneumatic
Double Solenoid
Field Conversion from Dual Exhaust
to Dual Pressure
Item #
PS5397
PL5167B
PL5168B
2 1
11
13
16 15
18
14
12
10
Solenoid Assembly
Solenoid Cover with captive mounting screws
Solenoid Coil
Flux Sleeve
Compression Gasket
Top Seat
Small O-ring for top seat
Large O-ring for top seat
Solenoid Plunger
O-ring for coil
Flux Plate
O-ring for flux plate
Seal for solenoid cover to conduit adapter
Spring for plunger
Conduit Adapter Assembly
Conduit Body
Leads
Mounting Screws (#10-24x1) - conduit body
to valve body (not shown)
Valve Body Assembly
Valve Body
Molded Gasket for valve body to conduit body
Seal for end cap
Locking Override
End Cap Assembly with non-locking override
Wire Clip
Polyurethane Check Ball - 1/8" Dia.
Stem Assembly
Plug - 3/16" Dia. Rubber Ball
Piston
Lip Seal
Mounting Screws - end cap to valve body
Detent Wire
Rubber Ball
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
17
23
31 22 30 29 32 28 27 26 25
22
19 20 21
22
Pneumatic
KNOB STYLE
MANUAL OVERRIDE
24
33
32
V-255D
Index
SS Series Valves
4-Way, 5-Port, 2-Position
Catalog 0620-E/USA
Double Solenoid
Service Kits Available
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2 1
3
10
11
12
13
16 15
18
14
V-256CP
Description
Solenoid Assembly
Solenoid Cover with captive mounting screws
Solenoid Coil
Flux Sleeve
Compression Gasket
Top Seat
Small O-ring for top seat
Large O-ring for top seat
Solenoid Plunger Assembly
O-ring for coil
Flux Plate
O-ring for flux plate
Seal for solenoid cover to conduit adapter
Spring for plunger assembly
Conduit Adapter Assembly
Conduit Body
Electrical Leads
Mounting Screws (#10-24x1) - conduit body to
valve body (not shown)
Valve Body & End Cap Assemblies
Valve Body
Molded Gasket for valve body to conduit body
End Cover
Return Spring
Seal for end cap to body
Lip Seal
Sleeve
Wire Clip
Polyurethane Check Ball - 1/8" Diameter
Stem Assembly
Plug - 3/16" Diameter Rubber Ball
O-ring - sleeve to body
Piston
Washer
Mounting Screws - end cap to valve body
(not shown)
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Index
SS Series Valves
4-Way, 5-Port, 3-Position
17
27 28 19 20 29 30 21 31 32 33
34
34
22
23 24
25 26
Pneumatic
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
SS120037
SS120050
SS121025
SS121037
F5F15000XXA
B7F3000XXA
F5F13000XXA
F5F15000XXA
SS121050
SS122050
SS140025
SS140037
B7F3000XXA
B7F3000XXA
F5413000XXA
F5415000XXA
SS140050
SS140237
SS141025
SS141037
B743000XXA
F5465000XXA
F5413000XXA
F5415000XXA
SS141050
SS147025
SS151025
SS151037
B743000XXA
F5413000XXA
F5813000XXA
F5815000XXA
SS151050
SS161025
SS161050
SS20002501
B783000XXA
F5913000XXA
B793000XXA
F5E13BGA23A
SS20002522
SS20003701
SS20003701M5
SS20003720
Notes
Alternate SS Valve
Notes
12
F5E13BGA19A
F5E15BGA23A
F5E15LGA23A
F5E15BGA12A
12
12
SS20003722
SS20005001
SS20005001SP1
SS20005021
F5E15BGA19A
B7E3ADH53A
NO CROSS
B7E3ADH45A
SS20103722
SS20105001
12
12
SS20005022
SS20023701
SS20023702
SS20102501
B7E3ADH49A
F5E65BGA23A
F5E65BGA87A
F5E13BGA23A
SS20105022
SS20123701
12
SS20102501M5
SS20102502
SS20102520
SS20102522
F5E13LGA23A
F5E13BGA87A
F5E13BGA12A
F5E13BGA19A
3
3
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
24
Pneumatic
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
SS20102523
S20103701M5
S20103702
SS20103723
SS20105002
SS20105021
SS20105023
SS20105058
B7E3ADH57A
B7E3ADH45A
NO CROSS VOLTAGE 125VDC
NO CROSS VOLTAGE 250VDC
SS20123701M1B
SS20133701
SS20163701
SS20202501
F5E15LGA23A
F5E15LGA23A
F5E13BHA23A
SS20202502
SS20203702
SS20203720
SS20205021
F5E13BHA87A
F5E15BHA87A
F5E15BHA12A
B7E3ACH45A
SS20302501
SS20303701
SS20303702
SS20362515
F5E13BGB23A
F5E15BGB23A
F5E15BGB87A
NO CROSS VOLTAGE IS 48VDC
SS20402501
SS20402523
SS20402559
SS20403701
F5E13BGB23A
NO CROSS VOLTAGE 125VDC
NO CROSS VOLTAGE 120/50 VAC
F5E15BGB23A
SS20403723
SS20405001
SS20423722
SS20503702
SS20505001
SS20603701
SS20703701
SS20705001
SS20802501
SS20802522
SS20803701
SS20805001
Notes
Alternate SS Valve
Notes
7
7
4
1
2
SS20103701
SS20103701
SS20203701 & Bush to 1/4"
8
8
9
9
SS20103701
SS20105001
SS20103722
9
9
B7E3ACR53A
F5E15BJB23A
F5E15BJA23A
B7E3ADH53A
SS20205001
SS20103701
SS20103701
SS20105001
9
9, 10
10
10
F5E13AKA23A
F5E13AKA19A
F5E15AKA23A
B7E3ACH53A
7
7
7
3
11
11
11
11
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
25
Pneumatic
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
Notes
SS20805021
SS20903701M5
SS20905001
SS40002501
B7E3ACH45A
F5E15LKB23A
B7E3ACR53A
F5213BGA23A
SS40002502
SS40002522
SS40002523
SS40003701
F5213BGA87A
F5213BGA19A
NO CROSS VOLTAGE 125VDC
F5215BGA23A
SS40003702
SS40003722
SS40003723
SS40005001
F5215BGA87A
F5215BGA19A
NO CROSS VOLTAGE 125VDC
B723ADH53A
SS40005023
SS40023701
SS40023702
SS40102501
7
3
3
SS40102501M2
SS40102501M5
SS40102502
SS40102521
F5215BGA23A
F5213LGA23A
F5213BGA87A
F5213BGA15A
SS40102522
SS40102523
SS40102523M2
SS40103701M5
F5213BGA19A
NO CROSS VOLTAGE 125VDC
NO CROSS VOLTAGE 125VDC
F5215LGA23A
SS40103702
SS40103720
SS40103723
SS40105002
F5215BGA87A
F5215BGA12A
NO CROSS VOLTAGE 125VDC
B723ADH57A
SS40105023
SS40123701M1B
SS40132501
SS40135001
SS40202501
SS40202523
SS40223701M1B
SS40223722M1B
F5213BHA23A
NO CROSS VOLTAGE 125VDC
Alternate SS Valve
Notes
SS20205001
SS40103701 & Bush to 1/4"
9, 11
12
12
SS40103701
12
SS40103722
12
SS40105001
12
SS40123701
12
7
4
1
1
F5213LGA23A
B723KDH53A
7
4
4
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
26
Pneumatic
8
8
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
Notes
SS40302501
SS40302515
SS40302559
SS40303701
F5213BGB23A
NO CROSS VOLTAGE IS 48VDC
NO CROSS VOLTAGE IS 120V/50HZ
F5215BGB23A
SS40303758
SS40362515
SS40402501
SS40402501M2
SS40402501M4
SS40402522M4
SS40402523
SS40402523M2
F5213BGA23A
F5213BGA19A
NO CROSS VOLTAGE 125VDC
NO CROSS VOLTAGE 125VDC
6
6
7
7
SS40402523M4
SS40402559M4
SS40403701
SS40403701M2
7
7
SS40403722
SS40403723
SS40403758
SS40405001
F5215BGB19A
NO CROSS VOLTAGE 125VDC
NO CROSS VOLTAGE 250VDC
B723ADR53A
SS40405001M2
SS40423759
SS40423759M2
SS40603701
B723BDA53A
NO CROSS VOLTAGE IS 120V/50HZ
NO CROSS VOLTAGE IS 120V/50HZ
F5215BJB23A
SS40703701
SS40705001
SS40705002
SS40805001
Alternate SS Valve
Notes
12
7
7
SS40103701
9, 12
7
7
SS40103701 & Bush to 1/4"
SS40103701 & Bush to 1/4"
9
5
6
6
SS40103701
SS40103701
9
5, 9
SS40103701
SS40105001
SS40105001
5, 9
SS40103701
9, 10
F5215BJA23A
B723ADH53A
B723ADH57A
B723ACH53A
SS40103701
SS40105001
10
10
SS40205001
11
SS50002501
SS50003701
SS50003702
SS50005001
F5513BGA23A
F5515BGA23A
F5515BGA87A
B753BDH53A
12
12
SS50105001
12
SS50023702
SS50023722
SS50102501
SS50102522
F5565BGA87A
F5565BGA19A
F5513BGA23A
F5513BGA19A
SS50123722
SS50103701 & Bush to 1/4"
SS50103722 & Bush to 1/4"
12
7
7
5
7
7
3
3
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
27
Pneumatic
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
SS50103701M5
SS50103702
SS50103721
SS50105001M5
F5515LGA23A
F5515BGA87A
F5515BGA15A
B753KDH53A
SS50105002
SS50105021
SS50105023
SS50105058
B753BDH57A
B753BDH45A
NO CROSS VOLTAGE 125VDC
NO CROSS VOLTAGE 250VDC
SS50123702M1B
SS50133701
SS50202501
SS50403701
F5513LGA23A
F5513BHA23A
F5515BGB23A
SS50405001
SS50502501
SS50505001
SS60002501
Notes
Alternate SS Valve
Notes
7
7
4
1
SS50103701
SS50203701 & Bush to 1/4"
SS50103701
B753ADR53A
F5513BHB23A
B753ACR53A
F5613BGA23A
SS50105001
SS50203701 & Bush to 1/4"
SS50205001
SS60103701 & Bush to 1/4"
9
9
9
12
SS60002501M5
SS60002522
SS60003701
SS60005001
F5613LGA23A
F5613BGA19A
F5615BGA23A
B763ADH53A
12
12
SS60005022
SS60032501
SS60102501
SS60102521
B763ADH49A
F5613LGA23A
F5613BGA23A
F5613BGA15A
SS60102522
SS60103701M5
SS60103702
SS60105023
F5613BGA19A
F5613LGA23A
F5615BGA87A
NO CROSS VOLTAGE 125VDC
SS60123701
SS60135001
SS60405001
SS60405023
F5665BGA23A
B763KDH53A
B763ADR53A
NO CROSS VOLTAGE 125VDC
SSA120237
SSA141237
SSA20023701
SSA20023759
F5F65000XXA
F5465000XXA
F5E65BGA23A
NO CROSS VOLTAGE IS 120V/50HZ
3
3
3
7
SS60105001
SS60103701 & Bush to 1/4"
SS60103701 & Bush to 1/4"
12
8
7
3
1
SS60105001
SS60105001
SSA20123701
8
9
12
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
28
Pneumatic
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
Notes
SSA20123701M1B
SSA20123702
SSA20123721
SSA20223701M1B
F5E65BGA87A
F5E65BGA15A
4
3
3
4
SSA20823701
SSA40023701
SSA40023702
SSA40023759
F5E65BKA23A
F5265BGA23A
F5265BGA87A
NO CROSS VOLTAGE IS 120V/50HZ
3
3
3
7
SSA40123701M1B
SSA40123701M2
SSA40123702
SSA40153701
F5265BGA23A
F5265BGA87A
F5265BKB23A
4
3, 5
3
3
SSA40223702
SSA40823701
SSA50023701
SSA50123702
F5265BHA87A
F5265BKA23A
F5565BGA23A
F5565BGA87A
3
3
3
3
SSA60123701
SSA60123701M1B
SSA60123702
SSA60123722
F5665BGA23A
F5665BGA23A
F5665BGA19A
3
4
3
3
SSA60223701
SSA60223702
SSA60233701
SSL20102501
F5665BHA23A
F5665BHA87A
F5665LHA23A
F5E13BGA23A
SSL20103701
SSL20105001
SSL20105002
SSL20203701
Alternate SS Valve
Notes
SSA20223701
SSA40123701
11
12
SSA40123701
SSA40123701
SSA40223701
SSA50123701
11
12
13
F5E15BGA23A
B7E3ADH53A
B7E3ADH57A
F5E15BHA23A
SS20103701
SS20105001
13
13
SS20203701
13
SSL20205001
SSL20803701
SSL40102501
SSL40103701
B7E3ACH53A
F5E15BKA23A
F5213BGA23A
F5215BGA23A
SS20205001
SS20203701
SS40103701 & Bush to 1/4"
SS40103701
13
11, 13
13
13
SSL40105001
SSL40133701
SSL40802501
SSL50103701
B723BDH53A
F5215LGA23A
F5215LKA23A
F5515BGA23A
SS40105001
SS40103701
SS40203701 & Bush to 1/4"
SS50103701
13
8, 13
11, 13
13
3
3
1, 3
NOTE
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
29
Pneumatic
Index
SS Series Valves
Catalog 0620-E/USA
Cross Reference
Obsolete SS Valve
Suggested Replacement
Notes
SSL50105001
SSL50205001
SSL60102501
SSL60103701
B753ADH53A
B753ACH53A
F5613BGA23A
F5615BGA23A
SSL60103702
SSL60205001
SSWL20123701
SSWL50123701
F6515BGA87A
B763ACH53A
F5265BGA23A
F5565BGA23A
3
3
SSW121237
SSW20123701
SSW20123722
SSW20223701
F5F65000XXA
F5E65BGA23A
F5E65BGA19A
F5E65BHA23A
3
3
3
3
SSW40123701
SSW40123722
SSW50123701
SSW60123701
F5265BGA23A
F5265BGA19A
F5565BGA23A
F5665BGA23A
3
3
3
3
SSXL20123701
SSXL20223701
SSXL20823701
SSXL40123701
F5E65BGA23A
F5E65BHA23A
F5E65BKA23A
F5265BGA23A
3
3
3
3
SSXL60123701
SSX141237
SSX20123701
SSX20123702
F5665BGA23A
F5465000XXA
F5E65BGA23A
F5E65BGA87A
3
3
3
3
SSX20123722
SSX20223701
SSX40123701
SSX40123702
F5E65BGA19A
F5E65BHA23A
F5265BGA23A
F5265BGA87A
3
3
3
3
SSX50123701
SSX50123702
SSX50123720
SSX50123722
F5565BGA23A
F5565BGA87A
F5565BGA12A
F5565BGA19A
3
3
3
3
SSX60123701
F5665BGA23A
Alternate SS Valve
Notes
SS50105001
SS50205001
SS60103701 & Bush to 1/4"
SS60103701
13
13
13
13
SS60205001
13
Notes
1. This SS valve is modified for dual pressure application with highest pressure at the Red port. The F5 valve requires External Pilot and
connect the high pressure to the #5 Port.
2. This SS valve is modified for dual pressure application with highest pressures at the Black port. The F5 valve requires External Pilot
and connect the highest pressure to the #3 port.
3. This valve is attached to a Manifold Assembly. No direct replacement is available. Review application of valve configuration.
Recommended F5 valve listed includes Manifold Base.
4. The M1 Modification was a Special External Pilot Drilling to the body for attaching the valve to a Manifold made by the BW Rogers
Company for Firestone and Goodyear tire manufacturing industry. Review of application required for suitable replacement.
5. The M2 Modification was Non-Locking Manual Override on the Conduit End of valve only. SS4000 Series. The F5 or SS valve selected
had Non-Locking Manual Overrides on both ends of the valve.
6. The M4 Modification was Non-Locking Manual Override opposite the Conduit End of the valve. SS4000 Series. The F5 or SS valve
selected has Non-Locking Manual Overrides on both ends of the valve.
7. Use Repair Kits to Service Valve.
8. Field convert SS valve to Dual Pressure.
9. Selected SS valve has 18" Leads instead of 72" Leads.
10. Selected SS valve has Flush Type Non-Locking Manual Override instead of Knob Type Non-Locking Manual Override.
11. Selected SS valve has Flush Type Locking Manual Override instead of Knob Type Locking Manual Override.
12. Selected SS valve has Flush Type Non-Locking Manual Override instead of No Override.
13. Selected SS valve has No Indicator Light.
30
Index
Catalog 0620-E/USA
Offer Of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and
its authorized distributors, are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its
authorized distributors. This offer and its acceptance by any customer (Buyer) shall be governed by all of the following Terms and
Conditions. Buyers order for any such item, when communicated to Parker Hannifin Corporation, its subsidiaries or an authorized
distributor (Seller) verbally or in writing, shall constitute acceptance of this offer.
discard or otherwise dispose of any special tooling or other property in its
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,
sole discretion at any time.
offers, acknowledgments, acceptances and sales of Sellers products are
subject to and shall be governed exclusively by the terms and conditions
8. Buyers Property: Any designs, tools, patterns, materials, drawings,
stated herein. Buyers acceptance of any offer to sell is limited to these
confidential information or equipment furnished by Buyer, or any other
terms and conditions. Any terms or conditions in addition to, or inconsistent
items which become Buyers property, may be considered obsolete and
with those stated herein, proposed by Buyer in any acceptance of an offer
may be destroyed by Seller after two (2) consecutive years have elapsed
by Seller, are hereby objected to. No such additional, different or
without Buyer placing an order for the items which are manufactured
inconsistent terms and conditions shall become part of the contract
using such property. Seller shall not be responsible for any loss or
between Buyer and Seller unless expressly accepted in writing by Seller.
damage to such property while it is in Sellers possession or control.
Sellers acceptance of any offer to purchase by Buyer is expressly
9. Taxes: Unless otherwise indicated on the face hereof, all prices and
conditional upon Buyers assent to all the terms and conditions stated
charges are exclusive of excise, sales, use, property, occupational or like
herein, including any terms in addition to, or inconsistent with those
taxes which may be imposed by any taxing authority upon the manufacture,
contained in Buyers offer. Acceptance of Sellers products shall in all
sale or delivery of the items sold hereunder. If any such taxes must be
events constitute such assent.
paid by Seller or if Seller is liable for the collection of such tax, the amount
2. Payment: Payment shall be made by Buyer net 30 days from the date
thereof shall be in addition to the amounts for the items sold. Buyer agrees
of delivery of the items purchased hereunder. Amounts not timely paid
to pay all such taxes or to reimburse Seller therefore upon receipt of its
shall bear interest at the maximum rate permitted by law for each month
invoice. If Buyer claims exemption from any sales, use or other tax
or portion thereof that the Buyer is late in making payment. Any claims by
imposed by any taxing authority, Buyer shall save Seller harmless from
Buyer for omissions or shortages in a shipment shall be waived unless
and against any such tax, together with any interest or penalties thereon
Seller receives notice thereof within 30 days after Buyers receipt of the
which may be assessed if the items are held to be taxable.
shipment.
10. Indemnity For Infringement of Intellectual Property Rights: Seller
3. Delivery: Unless otherwise provided on the face hereof, delivery shall
shall have no liability for infringement of any patents, trademarks,
be made F.O.B. Sellers plant. Regardless of the method of delivery,
copyrights, trade dress, trade secrets or similar rights except as provided
however, risk of loss shall pass to Buyer upon Sellers delivery to a carrier.
in this Part 10. Seller will defend and indemnify Buyer against allegations
Any delivery dates shown are approximate only and Seller shall have no
of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress
liability for any delays in delivery.
and trade secrets (hereinafter Intellectual Property Rights). Seller will
defend at its expense and will pay the cost of any settlement or damages
4. Warranty: Seller warrants that the items sold hereunder shall be free
awarded in an action brought against Buyer based on an allegation that
from defects in material or workmanship for a period of 18 months from
an item sold pursuant to this contract infringes the Intellectual Property
date of shipment from Parker Hannifin Corporation. THIS WARRANTY
Rights of a third party. Sellers obligation to defend and indemnify Buyer
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO
is contingent on Buyer notifying Seller within ten (10) days after Buyer
ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER
becomes aware of such allegations of infringement, and Seller having
WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND
sole control over the defense of any allegations or actions including all
WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT
negotiations for settlement or compromise. If an item sold hereunder is
LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE,
subject to a claim that it infringes the Intellectual Property Rights of a third
WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF
party, Seller may, at its sole expense and option, procure for Buyer the
LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY
right to continue using said item, replace or modify said item so as to make
DISCLAIMED.
it noninfringing, or offer to accept return of said item and return the
NOTWITHSTANDING THE FOREGOING, THERE ARE NO
purchase price less a reasonable allowance for depreciation.
WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED
Notwithstanding the foregoing, Seller shall have no liability for claims of
WHOLLY OR PARTIALLY, TO BUYERS DESIGN OR SPECIFICATIONS.
infringement based on information provided by Buyer, or directed to items
5. Limitation of Remedy: SELLERS LIABILITY ARISING FROM OR IN
delivered hereunder for which the designs are specified in whole or part
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT
by Buyer, or infringements resulting from the modification, combination
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT
or use in a system of any item sold hereunder. The foregoing provisions
OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID
of this Part 10 shall constitute Sellers sole and exclusive liability and
BY BUYER, AT SELLERS SOLE OPTION. IN NO EVENT SHALL
Buyers sole and exclusive remedy for infringement of Intellectual Property
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR
Rights.
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
If a claim is based on information provided by Buyer or if the design for
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM
an item delivered hereunder is specified in whole or in part by Buyer,
OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS
Buyer shall defend and indemnify Seller for all costs, expenses or
SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH
judgements resulting from any claim that such item infringes any patent,
OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT,
trademark, copyright, trade dress, trade secret or any similar right.
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO
11. Force Majeure: Seller does not assume the risk of and shall not be
WARN OR STRICT LIABILITY.
liable for delay or failure to perform any of Sellers obligations by reason
6. Changes, Reschedules and Cancellations: Buyer may request to
of circumstances beyond the reasonable control of Seller (hereinafter
modify the designs or specifications for the items sold hereunder as well
Events of Force Majeure). Events of Force Majeure shall include
as the quantities and delivery dates thereof, or may request to cancel all
without limitation, accidents, acts of God, strikes or labor disputes, acts,
or part of this order, however, no such requested modification or cancellation
laws, rules or regulations of any government or government agency,
shall become part of the contract between Buyer and Seller unless
fires, floods, delays or failures in delivery of carriers or suppliers,
accepted by Seller in a written amendment to this Agreement. Acceptance
shortages of materials and any other cause beyond Sellers control.
of any such requested modification or cancellation shall be at Sellers
12. Entire Agreement/Governing Law: The terms and conditions set
discretion, and shall be upon such terms and conditions as Seller may
forth herein, together with any amendments, modifications and any
require.
different terms or conditions expressly accepted by Seller in writing, shall
7. Special Tooling: A tooling charge may be imposed for any special
constitute the entire Agreement concerning the items sold, and there are
tooling, including without limitations, dies, fixtures, molds and patterns,
no oral or other representations or agreements which pertain thereto.
acquired to manufacture items sold pursuant to this contract. Such special
This Agreement shall be governed in all respects by the law of the State
tooling shall be and remain Sellers property notwithstanding payment of
of Ohio. No actions arising out of sale of the items sold hereunder or this
any charges by Buyer. In no event will Buyer acquire any interest in
Agreement may be brought by either party more than two (2) years after
apparatus belonging to Seller which is utilized in the manufacture of the
the cause of action accrues.
items sold hereunder, even if such apparatus has been specially converted
or adapted for such manufacture and notwithstanding any charges paid
by Buyer. Unless otherwise agreed, Seller shall have the right to alter,
31
Pneumatic
Index
Customer/Technical Service
Tel: (269) 629-5575
Fax: (269) 629-5385
Website: www.parker.com/pneumatic
E-mail:
PDNMKTG@parker.com