Académique Documents
Professionnel Documents
Culture Documents
Exam3
Spring 2015
Name: _____________________________
Max Points: 36
Max Time: 60 min
TRUE / FALSE
1. A key problem when designing data communications networks is how to adapt
to new technologies while organizations change
2. Today, many organizations design networks using the building-block approach.
3. Needs analysis is the final step in the building block approach to network
design.
4. The goals in the needs analysis step of network design are exactly the same
when designing LANs vs. when designing WANs.
5. The step of understanding current traffic on a network provides a baseline
against which future network requirements can be compared.
6. The turnpike effect results when a network is used at a much lower rate than
was anticipated when it was designed.
7. Simulation is a tool that can be used in designing networks.
8. Policy-based management allows the network manager to utilize special
software to set priority policies for network traffic that take effect when the
network becomes busy.
9. A SLA specifies the exact type of performance that the common carrier will
provide and the penalties if this performance is not provided.
10. The future of network management lies in the management of LANs, BNs,
and Internet resources instead of concentrating on mainframe resources.
11. Due to changing communication technologies, most companies have
combined voice and data communications functions.
12. One of the least common configuration activities is adding and deleting user
accounts.
13. User profiles should enable the network manager to identify the access rights
(to particular files and directories) for each user.
HJA
4/27/2015
MIS6316
Exam3
Spring 2015
14. Trouble tickets are reports produced by a software package that records fault
information.
15. Problem statistics are not helpful in determining whether vendors are meeting
contractual maintenance commitments.
16. To ensure that critical problems get priority over less important ones, problem
prioritizing is needed in a network.
17. Mean Time Between Failures is a statistic that is used to track device
reliability.
18. Service level agreements specify the exact type of performance and fault
conditions that an organization will accept from a common carrier or Internet
service provider.
MULTIPLE CHOICE
19. The traditional network design approach does not work well for _________
networks.
a. slowly evolving
b. rapidly growing
c. static
d. modestly growing
e. not growing
20. Which of the following is false about staff costs for a network?
a. The most expensive part of the network today is the staff who design,
operate, and maintain it
b. The emphasis is on network designs that reduce staff time needed to
operate them
c. Network staff are often required to learn to operate a variety of devices
d. Network staff are often required to maintain a variety of devices
e. When a variety of devices are used in a network, it takes less time to
perform network management activities
4/27/2015
MIS6316
b.
c.
d.
e.
Exam3
Spring 2015
26. Which of the following is not a conceptual part, or layer, of the geographic
scope of the network?
a. core layer
HJA
4/27/2015
MIS6316
b.
c.
d.
e.
Exam3
Spring 2015
application layer
access layer
distribution layer
the layer that connects the different distribution layers to each other
4/27/2015
MIS6316
Exam3
Spring 2015
HJA
4/27/2015