Académique Documents
Professionnel Documents
Culture Documents
assistenzasirio@masmec.com
+39-080-5856-200
SIRIO
Specialised kit installation
INSTRUCTIONS
B. Needle insertion and block
A. Needle sensor
MOUNTING INSTRUCTIONS
NEEDLE SENSOR MOUNTING
Insert the needle in the insertion section of the needle sensor(Fig.A) by pushing it gently
until it reaches the bottom (figure B). For some needle models, the direction of insertion in
coupling section is obliged.
ATTENTION
The detailed description of SIRIO's intervention specialised kit is provided in the related
User Manual, a prior lecture being recommended. Component description and general fitting
instructions are presented below.
Needle support (not included in the package)
3. Manoeuvrer
1. Patient sensor
2. Needle sensor
PACKAGE CONTENT
The specialised intervention kit contains:
Patient sensor
Needle sensor
Manoeuvrer
The Needle support is an accessory that is not included in the package, but is a fundamental
part of the system operation.
Please refer to the "Rapid use manual" for operations sequence of to be performed in the
procedure of intervention with the SIRIO system
POSTURAL MARKER POSITIONING (OPTIONAL)
Place adhesive markers for patient's posture monitoring so (1) are hidden during operation
as little as possible;(2) should be sufficiently distant from one another and do not form
symmetric arrangements.
USE WARNING
The intervention specialised kit must be used exclusively in association with the SIRIO
system and as described in the manual. MASMEC s.p.a. disclaims all liability for damage
resulting from improper use of the system.
Insertion clip particularity
Manouvrer assembling on the needle support.
MANOUVRER MOUNTING
Insert the manouvrer in the needle's support special coloured head until you hear a click .
rejection
in