Académique Documents
Professionnel Documents
Culture Documents
Abrasive Cutting
Head - 24,000 psi
(1,680 bar)
Replaceable nozzle features
carbide insert
Compact and lightweight to
work with NLB cutter or
crawler systems
Available flows from 1 to
4 gpm (3.8 to 15.1 lpm)
Stainless steel body for
long life
NLB-24K-ACSA
NLB7790
Hole Cutter
Cuts perfect holes in diameters
from 1 inch to 8 inches (25.4 mm
to 203 mm)
Compatible with 24,000 psi and
40,000 psi abrasive cutting
heads
Available with magnetic or
suction cup mounting system
48
AHC-1H
Abrasive Pipe
Cutter, 20K-APC-1A
Rugged, yet lightweight
Chain guides nozzle assembly
around pipe
Adjustable to pipes of
different diameters
Abrasive Hoppers
NLB-300-AC holds 300 lbs.
(136 kg) of abrasive
NLB-600-AC holds 600 lbs.
(272 kg) of abrasive
Both include NLB metering kit
DM5820-05, with discs for
11 flow rates (see table)
Pressurized hoppers available
NLB-300-AC
CA2674
Disc Size
CA2031
10
CA2032
15
CA2033
20
CA2034
30
CA2035
40
CA2036
50
CA2037
60
CA2038
70
CA2039
80
CA2040
90
CA2041
100
*The flow rate of #80 Garnet is approximately 6% higher than #36 or #50.
**Silica sand is used for wet abrasive blasting, but not recommended for abrasive cutting.
49