Académique Documents
Professionnel Documents
Culture Documents
COIL APPLCATION
WITH FAN
Author:
Quilqax Arawiyq
MAIL: majoro19@hotmail.com
WEB: http://maelec89.blogspot.com
YOUTUBE: https://www.youtube.com/user/maelec89
FACEBOOK: https://www.facebook.com/maelec89
Presented to:
Public in general
INTRODUCTION
The importance of this project, is not other, if not the one of giving a learning through the
observation, enriching acquired knowledge previously.
In the following document it is presented the design, analysis and assembly of an electronic
circuit. Using a well-known electronic device as coil. Keeping in mind their parameters and
measures, it is possible to give result to a design that allows; to understand and to learn the
form like it behaves a device like these.
An explanation will be given of how is development this project, to which Producciones
Maelec 8.9 to call PROYECTO BATEEN (Base Tetra cooling).
OBJECTIVES
With the following document, a simple explanation of the operation of a coil will be
given in a circuit.
With the association and adaptation of other elements is sought the reader to know all
the variants that it can be given to an electronic device.
THEORETICAL FRAME
The coils in simpler terms of understanding, are devices that generate a magnetic field when,
through them an alternating electromotive force is applied whose intensity is variable, this
device is an employee in most of projects and circuits.
The used coils as fans, it allows the assembly of projects in those which, it is needed to
generate a good atmosphere for other electric or electronic devices, locating it to the interior
or external of these devices.
Giving a short explanation of the function that completes a fan; inside this device there is a
coil that provides a magnetic field when it is induced, when it generates it, it causes the
variation of magnetic forces in some imams that it is inside the fan, production a variation in
the magnetic field, which becomes movement of the crosses of the fan.
EXPERIMENTAL PROCEDURE
MATERIALS
Semiconductors:
D1; D2; D3; D4; D5; D6; D7: (diodes) 1N4007
Others:
USB: male connector
M1; M2; M3; M4: (fans) fans of 5 volts
SW1: switch of three terminal
SW2; SW3: switches of six lineal terminals
(Note: the cost of the aforementioned elements previously and value of others used
elements they are in the appendix A)
It is necessary to clarify that the first stage one carries out in a pretender with switches
different to the specification ones in the materials, but with the same results.
Connection of the switches
In this stage it was carried out the connection of the fans and the switches according to
the mechanism and operation of activation of these elements. To achieve this will
unite these devices using a board (form perforated or designful printed).
bases.
bases.
As be can observe in the figure (3), it has been used some diodes (mentioned in the
materials), which allow the current flow in a single address allowing this way, to be
able to manipulate the activation and deactivation of the fans, optional of the
operative, without these elements the project would not have bigger utility, only
activating the fans without any configuration.
Producciones maelec 8.9 have decided not to show, the assembly of the diodes in the
project, since this process is exclusive of people that mean to carry out project, taking
into account the will and each person's approach.
3. Third stage total joining of the circuit
The end of this stage is the sum of the results obtained in each previously
aforementioned stage. Be could conclude then that the approximate voltage provided
by the computer through the port USB is then of about 5 volts it is intensity and
resistance it is were calculated keeping in mind; the securities of intensity that be
require each fan.
For this project the intensity that is required will be of 131mA for the fans (A) and (C) and
151mA for the fans (B) then; the aggregate value of intensity is calculated:
As be can appreciate in the equations (1), (2) and (3) it is the aggregate values of each
mensuration made to the project
In conclusion one has that: the circuit works with a tension of 5 volts, it has an intensity of
564 MA. And is their resistance of 8.87 .
Equation editor (Geogebra. Versin 5.0.18.0 -3D. [Computer file]
CONCLUISIONS
In the previous work one observes the behavior of a coil, their characteristics and functions.
All the data corresponding facts in the laboratory were gathered in the previous work, this
way it is possible to assimilate and to understand their correct operation when mounting it in
an electronic circuit.
The use of new devices that this is integrated to the coil, gives the reinforcement and dexterity
for the solution and creation of new projects.
BIBLIOGRAPHICAL REFERENCES
FISICA
Andrs Merino. (1994). Fsica. (NAUTA S.A). Espaa.
ELECTRONICA 2000
(n.d). Recovered of http://www.electronica2000.com
APPENDIX
Appendix A: Cost of the circuit
Materials
quantity
Colombian Pesos
American Dllar
D1 D7
100
700
3.5 dime
USB
500
500
1 quarter
SW1
700
700
3.5 dime
SW2, SW3
1,000
2,000
1 dollar
M1, M4
3,500
7,000
3.5 dollars
M2, M3
1,000
2,000
1 dollar
DISEO
4,000
4,000
2 dollars
TOTAL
10,800
16
16,900
8.45 dollars
The word "Design" in the chart, it is the cost that has this circuit made by Maelec 8.9
laboratories, excluding the materials (electronic and recyclable).
For the realization of this Project it is has worn out a minimum of two and a half hours that
this corresponds:
Analysis (observation of the outline or diagram), it proves (realization in the protoboard),
design (simulation in a software), assembly (elaboration of the board and setting of the
elements), fix (verification or retouch of the circuit).
For the conversion of the Colombian pesos to the cents and/or American dollars, it has taken
as reference a value of 2000 Colombian pesos, omitting the securities that this govern at the
present time.