Académique Documents
Professionnel Documents
Culture Documents
In this issue:
The African
Milling School
Designing a resilient
future
Ship unloading systems
Steel grain bin
management
India - Challenges facing
the milling industry
IDMA 2015
Show review
millingandgrain.com
perendale.com
Volume 126
Issue 5
Aeration
Material
Handling
Catwalk
Systems
Bulk Storage
Storage
Bins
You can trust Chief to offer reliable
and innovative grain storage, aeration
and material handling equipment for
your total grain management needs.
The One and Only Chief 1.1 The Giant of Grain Storage
Agri/Industrial Division
of Chief Industries, Inc.
We Engineer Relationships
VOLUME 126
ISSUE 5
MAY 2015
REGIONAL FOCUS
North America
NEWS
6-25
FEATURES
36 The African Milling
School
Australia Correspondent
Roy Palmer
Tel: +61 419 528733
royp@perendale.co.uk
FACES
PRODUCT FOCUS
28
CASE STUDY
70
48 Designing a resilient
future: Food, technology,
and sustainable
development
52 India - challenges facing
the milling industry
EVENTS
STORAGE
62 Ship unloading
systems: Mechanical Vs
Pneumatic?
TRAINING
27 Thailands AgriSchools
launch milling and feed
courses
COLUMNS
8 Mildred Cookson
16 Tom Blacker
18 Christophe Pelletier
22 Chris Jackson
2 GUEST EDITOR
Damon Sidles
72 MARKETS
US Wheat Associates
92 INTERVIEW
Henk van de Bunt
Guest
Editor
Fieramilano,
Milan
- Italy
09-11 June - FIAAP, VICTAM
&
19-23
May
- IPACK IMA
19 - 23 May 2015
GRAPAS International, Germany
Opening time: 10.00 am - 5.00 pm2015, Italy
Entrances: East, South, West Gates
Stand G014
Pavilion 1 - Stand A15
Pre-register on
www.ipack-ima.com
Being part
of innovation.
The future is IPACK-IMA 2015 the most comprehensive, valuable showcase for the food and non-food
supply chain. The global standard-setting exhibition for the Grain Based Food industry and the place to be for
health & personal care, chemicals and industrial goods. An innovative meeting place for the fresh food and
distribution sector.
A great exhibition of the worlds top production.
More Information
www.millingandgrain.com
http://gfmt.blogspot.co.uk
Co-located with:
Connected events:
An unparalleled, integrated, synergic collection of technology and innovations for processing, packaging,
converting and logistics, the extraordinary conjunction with the Expo 2015,
a great not-to-miss event.
Be sure to be there.
POWERED BY
FIERA MILANO AND
IPACK-IMA
Promoted by:
Organized by:
UNITED NATIONS
INDUSTRIAL DEVELOPMENT
ORGANIZATION
Tapcoinc.com
*4399 kg
REGIONAL FOCUS
NORTH
AMERICA
GLOBAL STATS
STORAGE
North America
The United States and Brazil have 6,718
feed mills and produce 66 million tons
from 1,698 feed mills.
See the full story on page 24
NORTH AMERICA
STATS
43.7 Yield (bushels per acre) of
wheat in the US in 2014, down 3.4
bushels from 2013, and the lowest
since 2011. (Source: NASS)
8.8 Number of acres (in millions) of
wheat harvested in 2014 in Kansas
- by far the USAs most productive
state for this commodity. Next
highest was North Dakota with 7.49
million. (Source: NASS)
22 Percentage drop in Canadas
total reported wheat production in
2014. To be fair, 2013 had been
an exceptionally good year, and
2014 marked a return to previous
production levels. Both harvested
area (-9.4 percent) and average
yield per acre (-13.9 percent)
decreased compared to 2013.
(Source: Statistics Canada)
20.2 Percentage increase in area
harvested for soybeans in Canada in
2014, more than compensating for
a 6.1 percent decrease in average
yield per acre, to give a total
production of 6 million tonnes, up
12.9 percent on the previous year.
(Source: Statistics Canada)
4 | Milling and Grain
COMMODITIES
PEOPLE
Jim Schroeder,
co-founder of Great
Western Manufacturing
Inducted into Kansas
State University Hall of
Fame
See the full story on page 94
News
MAY 15
Milling
A blog dedicated
to milling industry
professionals globally
ukup Manufacturing Co, a world leader in grain drying, storage and handling,
will acquire DanCorn, a leading dealer of the same in Denmark, as well as
internationally. DanCorn is the exclusive distributer of Sukup products in all
of Northern Europe and is located in Hedensted, Denmark.
As Sukup Manufacturing Co has been able to expand and grow, our dealers have
also grown bigger and shared in our success. DanCorn is an example of the benefit
of a mutually strong and lasting partnership, stated Steve Sukup, CFO of Sukup
Manufacturing Co. We are looking forward to continued growth with DanCorn and
the expanding opportunities in protecting grain and increasing profit for farmers,
added Charles Sukup, President of Sukup Manufacturing Co.
This acquisition will be of significant benefit to both Sukup Manufacturing Co
and DanCorn A/S. Sukup Manufacturing is a continuously expanding company,
growing over eight times since 2002. DanCorn has experienced tremendous success
with the introduction of Sukup (American) style grain drying and storage systems to
Northern Europe, where this style is now considered the norm.
GF
MT
gfmt.blogspot.com
Cargill Executive
Chairman Greg Page
maps path to a more
food-secure world
Milling News
increase production, ultimately mitigating the droughts
impact on global food production and ensuring peoples
access to safe, affordable, nutritious food, said Page.
He said it will also be increasingly important to honour
the principle of comparative advantage in food production.
To produce the food the world will need in the most
economically and environmentally sustainable way,
we need agriculture and trade policies that encourage
farmers to cultivate the crops best suited for their growing
conditions and then trade the surpluses with others, said
Page.
Page also said that the cumulative effects of individual
behaviours can be a powerful force for improving food
security and fighting malnutrition. The Chicago Councils
Healthy Food for a Healthy World report acknowledges
the power of emulation in its findings that women in part
because of their influence over their families diets will
be critically important to combatting malnutrition, said
Page.
Expanding on this point, Page said food industry leaders
need to enlist and engage consumers in understanding the
role of science in the food system, both nutritionally and
environmentally. Science and technology are important
not only to producing more food in a more sustainable
way, but also to our ability to improve food safety, reduce
food waste and make food more nutritious and healthful,
he said.
Finding solutions to end hunger and reverse the
consequences of poor nutrition requires trust, transparency
and collaboration, said Page. We look forward to being
part of this important work.
DESIGN
BUILD
EXPAND
With four generations of experience in the grain, feed,
flour milling and wood industries our family would be
more than happy to help you design, build, repair or
expand any new or existing grain facilities
We also offer a large variety of new and
used grain equipment to help meet your needs
norwood_hp.indd 1
REPAIR
Contact us on:
Fred Norwood, President; Tel: +1 405 834 2043
Brandon Norwood, Vice President; Tel: +1 785 822 4109
www.norwoodandco.com
10/02/2015
May 2015
| 7
17:30
Milling News
The Green Cap Windmill
used as the wheat
cleaning department
fixed on the crank shaft of the engine inside the mill, 9ft
1 in. in diameter, having a 9in. face. This spur wheel, by
means of three pinions, drove three lay shafts on this floor,
driving the roller mills on the floor above. The first floor
housed 20 sets of Clarks double roller mills, placed in
three rows for the breaking of the wheat and the reduction
of the semolina. The flour, three grades - patents, bakers
and low grade - were also packed on this floor. The other
four floors held the dressing machinery for separating the
broken grain from the semolina, middlings and flour. From
the second floor you could access the workshop containing
a lathe, circular saw, and other tools required for small and
emergency repairs when the millwright was not available.
The dressing machinery by George T Smith featured
purifiers and centrifugals with one dusting reel.
A separate building some short distance from the mills
provided the stive room where the fluff etc was collected.
This building, measuring 15ft x 20ft and 22ft high and was
made completely of wood. The floor was perforated with
some 220 holes and each perforation had a canvas pipe
hanging through to the ground floor immediately below.
The canvas pipes were tied at the ends and were cleaned by
shaking them by means of a lever before and after opening
the end for letting out the accumulated dust.
The wheat cleaning was performed in the Green Cap
windmill adjoining the steam mill. This had nine floors, the
top five used for storing the wheat. The lower floors were
used for cleaning the wheat. The wheat passed through
a Coleman and Mortons wheat grader from where it fell
into a Childs decorticator. The wheat after being brushed
in a Barnard and Leas brush machine was elevated to the
eighth floor where it was conveyed by a spout into the
adjoining building into a clean wheat bin, from here it
would be conveyed to be converted into flour.
These early articles contain much detail, which can only
be glimpsed in a summary like this. If you would like to
know more please contact me at mills@millsarchive.org
May 2015 | 9
Milling News
Mangement tool
A Statement by Joel G. Newman, President and CEO, American Feed Industry Association
he American Feed Industry Association applauds the introduction of bipartisan
legislation to update and renew Trade Promotion Authority. TPA was last enacted
in 2002 and expired in 2007. It allows the president to negotiate trade agreements,
and Congress to set priorities and retain its authority to approve or disapprove those
treaties through an up-or-down vote.
Following the bills introduction, AFIAs President and CEO, Joel G. Newman, stated:
AFIA fully supports renewed TPA as called for in the legislation introduced today,
which will open doors to new markets for the feed industry [and agriculture as a whole],
and enhance economic growth and jobs here in the U.S. Trade is consistently growing.
In 2014 alone, the US exported more than $10 billion worth of feed, feed ingredients
and pet food, and we recognise the exceptional room for growth and the impact this
legislation could have.
Thanks to Sens. Orrin Hatch (R-Utah) and Ron Wyden (D-Ore.), and Congressman
Paul Ryans (R-Wis.) efforts, our industry will have the potential to sell more high
quality, American-manufactured feed, feed ingredients and pet food to foreign markets.
As we look to the future, the US animal food industry recognises trade is a large part of
the big picture.
Removal of trade barriers and enforcement of trade rules requires the support of the
administration. TPA is essential to ensuring the US receives the best possible outcomes
in trade agreements, and AFIA strongly encourages Congress, as well as the president,
to work together for an efficient and beneficial outcome. It is important to remember
however, even though TPA is an important piece of the puzzle, it is not the only piece.
This legislations timing is significant as the US pursues trade agreements such as the
Trans-Pacific Partnership and the Transatlantic Trade and Investment Partnership.
While AFIA applauds the introduction of this bill, Congress needs to act swiftly to
enact TPA. Without TPA, United States negotiators will lack authority and have limited
ability and leverage when negotiating free trade agreements.
The TPA legislation introduced includes significant improvements to the 2002 TPA
law in areas such as non-tariff barriers to US goods and services, digital commerce,
restrictions on cross-border data flows, fair competition with state-owned enterprises,
labor and environmental standards, and enhanced procedures to ensure Congressional
oversight and public input on US trade negotiations.
Milling News
COMPANY
UPDATES
May 2015 | 11
Milling News
Alltech acquires
Ridley Inc
to strengthen global leadership
position in commercial animal
nutrition
Agentis Innovations
opens European
headquarters in Cyprus
Milling News
Wenger enters
agreement with safety
chain software
Delivering
Buckets full
of experience
The worlds largest range of elevator
buckets
Trusted partner
Watchdog Elite
Complete Hazard Monitoring System for Bucket
Elevators and Conveyors!
l Bearing Temperature, Belt Misalignment,
Underspeed, Belt Slippage, Blockage Detection
l Fully programmable to optimize elevator operation
l LED displays for speed and set-up
l Simple, reliable, consistent
Elevator Bolts
Cold Forged for Highest Quality!
l Euro Bolts (DIN15237), Original
Ref 70, Fang Bolts & Easifit Bolts
l Available in steel / stainless / zinc
plated
l Wide range available from stock
www.go4b.com
Email: 4b-uk@go4b.com
May 2015 | 13
Revised Buckets C2 half page 2.indd 1
21/09/2010 11:37:09
We Mean Busin
Cost Effective Solutions That Get Results!
Smart companies dont buy names. They
buy results. Results that dont vanish when
things get tough. Results that deliver when
projects and reputations hang in the
balance. At times like these, the trust placed
in your equipment suppliers will either pay
dividends or spell disaster.
Global Industries has provided results-based
grain systems for more than half a century.
Single component? Total project? Doesnt
matter! Global works to understand your
ness
Milling News
A Flour World
Museum story
No. 1
Meeting millers
Tom Blacker, International Milling Directory
King-size
king cake
You can get it as a dry cake, with
cream, truffle chocolate, or in worldrecord size king cake, eaten in
Mexico since the 16th century at
Epiphany. To celebrate 200 years
of Mexican independence, Mexico
City bakers made a truly king-size
"Rosca de Reyes" weighing ten tons
and measuring 2360 feet long. The
massive cake took 16,684 pounds of
flour, 56,880 eggs and 8157 pounds
of butter, and cut nicely into 254,000
pieces. But no one knows who
found the porcelain figurine that is
hidden in every Rosca de Reyes. This
will no doubt remain a mystery, for
whoever finds it must make tamales
for all the guests, later at the
"Fiesta de la Candelaria". With this
gargantuan cake that would be an
impossible task.
The Mhlenchemie FlourWorld Museum
in Wittenburg is an expression of our
company culture and the responsibility
we feel towards the miller and his flour,
as one of the most important staple
foods. The museum is a journey through
the millennia, illuminating the development and importance of flour. It is
the only one of its kind in the world.
www.flourworld.de
Tom Blacker
Directory Coordinator
www.muehlenchemie.de
16 | Milling and Grain
Milling News
A u s SO cn lai nne
www.aunir.co.uk
May 2015 | 17
Milling News
by Christophe Pelletier
The potential to grow the
quantity of food needed to meet
the needs of the world growing
population is there. It is not
just a matter of production on
farms, though. To succeed, the
entire value chains will have to
be well organised and efficient.
Infrastructure rarely makes the
headlines. Yet, it should because it plays an essential role.
Infrastructure is really the lifeblood of future food security.
There cannot be long-term prosperity or successful
economic development without an adequate infrastructure.
Once food is produced, it must also be delivered to
consumers and be eaten. For the future, the population
boom that will take place in urban centers of Asia and
Africa is going to require solid planning and vision. Many
of the megacities that will emerge in the coming 40 to
50 years hardly exist, yet. Nonetheless, they are coming.
Organising the proper supply of food, water and all other
essentials from production centers is crucial. The amount
of money needed will be huge. For some regions, a
Marshall Plan type of action will be necessary.
In my previous article, I explained why I see a great
opportunity for the feed and milling industry to lead in
the future to achieve food security in the decades to come.
It is particularly true for infrastructure. The feed and
milling industries could not exist if it could not get the raw
materials delivered to the plant and their products to the
customers. They need storage, vehicles, roads, railways
and waterways. They are going to need them even more
in the coming decades. As the map of population and
of economic activity evolves, so does the location of
consumption centres as well as of production areas.
The organisation of supply chains needs to adapt. Raw
materials will originate from new and different locations
and the industry will have to deliver customers in new
places. Because of its central position in the value chains,
the feed and milling industry can look both upstream and
downstream to pinpoint where infrastructure needs will
be. Then, it has a duty to be vocal about it and to let all the
stakeholders know about the infrastructure objectives to
achieve.
The unfortunate thing about infrastructure is that it is a
long-term investment. Nonetheless, it is an essential one.
If the goods cannot move to their destination smoothly,
neither will the money in the economy. When done well,
the positive financial return lies in economic development,
in more and better jobs. Eventually, more people will
18 | Milling and Grain
Milling News
www.andritz.com
May 2015 | 19
Milling News
National
Association of
Wheat Growers
applauds
introduction
of the Federal
Water Quality
Protection Act
bipartisan group
of senators
announced the
Federal Water Quality
Protection Act that
requires the Environmental
Protection Agency (EPA)
and US Army Corps of
Engineers to rewrite the
proposed waters of the US
regulation.
President of the National
Association of Wheat
Growers (NAWG), Brett
Blankenship, issued the
following statement.
We applaud the efforts
by this group of Senators
and the introduction of
this bill that seeks to
protect the water quality
of navigable waters and
more clearly define what
waters of the US includes
and does not include.
On behalf of the nations
wheat growers, we look
forward to working with
Congressional leadership
to ensure a swift passage.
We are very supportive
of this legislation that
addresses significant flaws
in the proposed WOTUS
rule.
NAWG also joined a
group of agricultural
organizations voicing
support for the Act by
signing on to a letter sent
to the Senate Committee
on Environment and
Public Works. This
legislation establishes
sound principles to guide
the agencies action on a
waters of the US rule so
the final result reflects the
statutory limits created by
Congress.
Milling News
Bringing the
best to Somalia:
IMGS leads the way
Although IMGS offers its services in a variety of ports
around the world, we take particular pride in the fact
that our equipment and most importantly our invaluable
staff are capable of delivering our services to the IMGS
benchmark of high quality, in particularly tough locations.
One such recent example is our operations in the Federal
Republic of Somalia.
IMGS teams have been deployed in both the ports of
Mogadishu and Kismayo in Somalia for the since 2013.
Our teams face real challenges in our daily operations in
these ports as local infrastructure and labour have little
to zero background in the handling of valuable agri-
TENDER NOTICE
FOR SUPPLY, INSTALLATION & COMMISSIONING
OF FLOUR MILLS EQUIPMENT
www.soharourmills.com
info@soharourmills.com
May 2015 | 23
sohar_90x132mm.indd 1
07/05/2015 08:49
Poultry Highlights
Top 10 Countries
Country
Total
Mil
Tons
Pig
Calf
Lay
Broil
China
183
85
0.2
24
41
18
0.4
USA
173
21
19
21
20
55
8.5
Brazil
66
14
31
Mexico
31
0.2
11
0.2
0.9
0.5
India
29
11
Spain
29
14
0.2
0.4
.2
0.5
0.2
0
Dairy Beef
Horse
Russia
26
10
0.6
0.5
Japan
24
0.3
Germany
24
10
0.3
0.9
0.3
France
22
0.4
1.3
0.1
1.1
0.3
Points of Interest
All species were UP in AFRICA, despite the fact
that this region had the HIGHEST prices on raw
ingredients for feed.
Africa was the only region to see an increase in
production for all species.
Asia, Africa, Europe, Latin America and North
America all saw an increase in the number of
feed mills. North America had the biggest jump,
adding 1,054 mills in the year. The Middle East
saw a decrease in the number of feed mills.
7-Cs.nl AARSEN5009
05-05-15 16:12
Being part
of innovation.
The future is IPACK-IMA 2015 the most comprehensive, valuable showcase for the food and non-food
supply chain. The global standard-setting exhibition for the Grain Based Food industry and the place to be for
health & personal care, chemicals and industrial goods. An innovative meeting place for the fresh food and
distribution sector.
A great exhibition of the worlds top production.
Co-located with:
Connected events:
An unparalleled, integrated, synergic collection of technology and innovations for processing, packaging,
converting and logistics, the extraordinary conjunction with the Expo 2015,
a great not-to-miss event.
Be sure to be there.
POWERED BY
FIERA MILANO AND
IPACK-IMA
Promoted by:
Organized by:
UNITED NATIONS
INDUSTRIAL DEVELOPMENT
ORGANIZATION
May 2015 | 25
Mill
Training
Thailands AgriSchools
launch milling and feed
courses
AgriSchools will be held at Kasetsart Universitys Kampang
Saen Campus, in Bangkok, Thailand, using their recently opened
state-of-the-art training facilities.
The 2015 AgriSchools program include
Feed Mill Management 11th to 15th May
Pig Management 13th to 17th July
Aquaculture Nutrition 24th to 28th August
Layer Management 14th to 18th September
Aqua Milling 23rd to 27th November
Educating professionals
Enrol students and you will benefit from more knowledgeable and
competent millers and colleagues, with consequent improvements
in performance.
To enrol or find out more, contact: nabim 21 Arlington Street London SW1A 1RN UK
Tel: +44 (0)20 7493 2521 Fax: +44 (0)20 7493 6785 email: info@nabim.org.uk www.nabimtraining.com
May 2015 | 27
SonicAire 2.0
SonicAire 2.0 prevents combustible dust buildup and
saves money.
PRODUCT FOCUS
MAY 2015
In every edition of Milling and Grain,
we take a look at the products that will
be saving you time and money in the
milling process.
www.iesclean.com
www.brabender.com
www.alapala.com
28 | Milling and Grain
www.oryem.com.tr
FOCUS
SPECIAL FOCUS
de-charging has been taken care of. The AQC806 is a 4-rollermill with one sieve. The mill consists of a heavy welded steel
chassis part with integrated motorblock, frequency converter
and electronic device. The milled grinding device made of
aluminium contains the inlet funnel, the 4 grinding rolls with
adjustable distance and the drive. The corrugated grinding rolls
are made of high quality hardened steel. The large compound of
the grinding block allows vibration-free operation at low noise.
The electronically controlled feeding roll allows precise and
constant dosage in the range of approx. 15 - 50gr/min. The main
drive at the 3-phase, frequency controlled motor is handled by
a drive belt, the drive of the rolls by means of a rotating fl at
belt. The extrinsically running sieve area is operated by a high
flexible round belt.
www.agromatic.com
May 2015 | 29
www.andritz.com
The new OptiMix paddle mixer is a result of dedication and hard work from our
skilled R&D team. It is a key factor of our vision to keep providing the best quality
machines to our customers that ensure easy production, cost efficiency and highquality results.
ANDRITZ is committed to substantial R&D efforts in order to lead the industry in
technological innovation. We are consistently offering advanced products, so
our customers will continue to see the benefits of buying our products.
Storage solutions
Symaga is a Spanish company specializing in the design,
manufacture and supply of steel silos for storing seeds,
cereals, malts, oilseeds, grains and pellets, and rice for
the agriculture, agro-industry, biofuels and biomass
industries.
The company has more than 30 years of experience and
over 15 million m3 of storage space worldwide, ensuring
the capacity to tackle any project.
Symaga supplies a wide range of silos, flat bottom up to
25,000 cubic meters, and hopper silos reaching 12 meters
in diameter with 45-degree hopper and 2,649 cubic
meters capacity, completely galvanized and the double
welded compression ring. Symaga provides Z600 gr/m
galvanization, and continues to invest
in research and development, allowing
it to develop new products such as
ventilated cones and fully perforated
floors, to meet customer needs.
2015
PRODUCT SHOWCASE
This months Milling and Grain
magazine is the Product
Showcase issue. We take a look
at the product, bith new to the
market, and
www.symaga.com
30 | Milling and Grain
www.tapcoinc.com
FOCUS
Satake RGBS
optical sorter
Satake has introduced the new RGBS optical sorter. This large
capacity colour sorter features advanced RGB cameras and
Smart Sensitivity sorting technology. It is ideally suited to sort
cereals, pulses in a plant environment. The full-colour cameras
recognize 16 million subtle colour differences contributing to food
security and improving the grains appearance.
The new user interface design has individual
sensitivity adjustments for specific defects.
This simple sorting control makes it easy for
the operator to achieve maximum sorting
performance with minimum training.
New extra width chutes provide high
processing capacity and the option of a simultaneous tertiary
sort offers higher yield. The reverse sort option provides an
additional function for reclaiming good
product from the reject.
Available in two frame sizes (RGBS
3000 and 5000) the RGBS is the latest
addition to the range of Satake full
colour sorters to compliment the
Evolution and Pikasen.
Storage solutions
The main trends in the grain storage industry are: Increase
in demand for grain storage, increase in demand for
silos of bigger capacities, flexibility in
design, growing importance of safe
storage, government-becked silos and
competitive prices.
Therefore, Silos Cordoba use a new
coating, Z-600, and has developed a
new model of silo, the model 41.25.
These are the biggest silos that has ever
been assembled by Silos Cordoba and the biggest silos
assembled in Europe.
www.satake-group.com
NexGen 3150
Commercial Sweep
Hutchinson, a division of Global Industries, Inc., recently
introduced the NexGen 3150 Commercial Sweep that
combines a powerful four-wheel drive tractor with a
unique modular design that allows adaptation to silo
diameters from 14.63 m to 45.72 m. The NexGen3150
boasts capacities from 200-400 MTPH with 45.7.cm O.D. X
10 mm thick flighting. Additionally, the 10:1 gear reducer
delivers up to 40 kilowatts of power to the 3150 auger,
enabling it to handle the toughest jobs with ease.
The NexGen3150 comes standard with a sophisticated
Control Systems Box featuring advanced touchscreen technology, offering customers the speed and
convenience of Zero Silo Entry with totally automated
operations. Users can switch to manual operation when
needed, and can control start, stop, flight speed and
reverse options through the user-friendly control panel.
Other system functions, including current sweep position,
can also be monitored via the innovative control panel.
The NexGen 3150 can also be equipped with
Hutchinsons Tru-Klean Chain & Paddle Drag System.
When mounted directly behind the NexGen 3150 auger,
the Tru-Klean system delivers a nearly broom swept finish
to interior silo floors.
Todays operators need to maximise the efficiency of
their grain operations to stay competitive. The NexGen
3150 combines the capacity, power, performance,
technology and rugged construction required to keep
operations flowing while providing years of reliable and
problem-free service.
www.globalindinc.com
www.siloscordoba.com
www.buhlergroup.com
May 2015 | 31
In every edition of Milling and Grain, we take a look at the products that will
be saving you time and money in the milling process.
9 - 11
June,
2015
Kln, G
erman
y
AT
THIS PRODU
CT
AT
S EE
FOCUS
Curved combination conveyor - by Perry
It is designed for trade use with the finest accuracy (+/- 0.1
percent - 0.2 class) to weigh free-flowing bulk products such as
cereals, grains or sugar. It complies with applicable directives,
having been certified by the French notified bodies LNE and
LCIE, which also authorises its installation in an explosible
atmosphere. A multiple-function instrument, it fits into the
various stages of the process, such as product input and output
weighing.
S EE
THIS PRODU
CT
AT
A true monitoring tool, the ABS-XL hopper scale offers nonconstant batch weighing in static mode (more accurate than
dynamic mode), providing the user with a constant continuous
process.
T
DA
T
TA
9 - 11
June,
2015
Kln, G
erman
y
with
Thursday June 11, 2015
13:00 - 13:30
10:00-10:30
1.2
2.1
bit.ly/grapas
15:30-16:00
3.1
REGISTER
D
O
T
AY!
eive a
and rec bscription to
su
month
azine
FREE 12 nd Grain mag
a
Milling
2015 Conference
PROGRAM
10:00-12:00
SESSION 1:
13:00-15:00
SESSION 2:
conditions
by Dr Peter Shewry, Distinguished Research Fellow,
Department of Plant Biology and Crop Science,
Rothamsted Research Centre, and Professor of Crops and
Health, School of Agriculture, Policy and Development,
University of Reading, UK
15:00-17:00
SESSION 3:
Trends & Developments
Chair/Co-chair:
Dr Peter Shewry
& Roger Gilbert
17:00-17:15
Summing up
and close
Organised by
Part of
Figure 1
HEAD
MILLER
Supervisor
MILLER
Proffesional Miller
PRODUCT MANAGER
Commitment to Africa
piece of mind to all our customers. And this is not the only
establishment Bhler has in Africa and the Middle East; I noted
they have split the region Middle East & Africa into five subregions. With over 500 permanent staff they have offices in South
Africa, East Africa, North and West Africa as well as Middle East
and Central-Eurasia. With full time employees on hand to help
their customers grow and develop their businesses.
Talking further with Martin, he went on to explain You
must understand Darren, working at Bhler is fascinating and
inspiring as it is not just flour milling, we have feed milling, pasta
technology, rice milling and also coffee and cocoa processing.
Africans love rice and this is growing in popularity and many
African Governments give support to develop the agroindustry.
Continuing, So this is why Bhler has a solid base. We have
many customers that want to diversify their milling opportunities
and we not only have the equipment solutions, we can offer the
after-sales service and training as well.
In the lab there was all the latest equipment from companies
such as Perten and Brabender to name but a few. Martin was
quick to point out that he was extremely grateful to all the
companies that had contributed to some of the cost in supplying
AMS with the latest equipment for students to use.
In the lab there was all the latest equipment from companies such as Perten and Brabender to name but a few.
Martin was quick to point out that he was extremely grateful to all the companies that had contributed to some of the cost in supplying AMS with the latest
equipment for students to use.
First impressions
SV
Image_AZ_190x132_E_RZ.indd 1
17.04.2015
May 2015
| 3908:47:28
F
in the limited time I spent in the classroom,
it was clear the whole group were following
every word of Stephan and asking quite
challenging questions. Being the first
group of students to go through the AMS,
there was an evident sense of pride that
was clearly visible on the students faces,
and being in the fourth week of the first
four week module of the course, there was
immense excitement from the students about
returning to their mill for 8 to 16 weeks so
they could start to implement what they
have learnt before they returned for the
second four week module.
This management of the modules is one
of the fantastic aspects of the whole course.
This is split into six, four-week modules
over a two-year period. In the first year
they will spend, for example, four weeks in
February, May and October covering such
topics as, but not limited to:
Cereal Science such as cereal varieties
Grain Intake / Storage such as machines for pre-cleaning, flow
sheets for grain intake/storage and conveyers
Cleaning covering machines for grain cleaning, tempering and
conditioning of wheat, flow sheets for cleaning all backed up
with daily practical work
Wheat milling learning about all the machines of a mill and
their respective flow sheets etc
In the second year they will spend, for example, four weeks
R-Biopharm Rhne Ltd. Block 10 Todd Campus, West of Scotland Science Park, Acre Road, Glasgow Scotland G20 0XA www.r-biopharm.com
May 2015 | 41
Nothing escapes
Romer Labs.
AgraStrip
WATEX now
roved
GIPSA app
Lecithin is beneficial when fed to young animals, pigs and poultry. Nobacithin 50, a special
product which contains soya lecithin, was developed by Noba more than a decade ago.
In this article we explain the benefits of lecithin and, more specifically, of Nobacithin 50.
Lecithin in general
Nobacithin 50
F
Proven result
EXCELLENCE IN YEAST
EXCELLENT FOR POULTRY
e
ad
G
in
REAL
BREWERS
YEAST
in G e r m a n
y
M
any Made in
M ade i n G e
rm
y
an
an
ad e
M
erm
rm
Ge
About Noba
in G
ermany M
a
de
Leiber GmbH
Hafenstrae 24
49565 Bramsche
Germany
Tel. +49 (0)5461 9303-0
Fax +49 (0)5461 9303-29
www.leibergmbh.de
info@leibergmbh.de
06/05/2015 16:28
animal-nutrition@evonik.com
www.evonik.com/animal-nutrition
15-01-148 International Aquafeed Magazine Milling-Grain AZ DL Methionine for Aquaculture 190x132 Mai 2015.indd 1
May 201513.04.15
| 47
14:19
Designing a
resilient future:
Food, technology, and
sustainable development
IPACK-IMA 2015
F
private labels in Italy. We gather over 200 medium and smallsize food-producing companies and we enabled many of them to
grow larger, reaching markets that would not otherwise have been
accessible to them. As a food distributor our contribution to the
packaging industry is relevant, both to bring consumers needs
to manufacturers of packaging materials and machinery and to
promote packaging-driven product and service innovation.
Good distribution must first know todays consumers and
understand tomorrows trends; this is essential to guide the
choices of all players in the production chain. The demand
for safety, shelf-life-related needs, fair prices, environmental
protection, transparency and product information accessibility
are the basic principles that must be observed by everyone manufacturers of goods, packaging producers and distribution
companies. In addition, this must be done with a strong ability to
integrate things and cooperate. It is in this spirit that I accepted
this responsibility in Ipack-Ima, and I hope to contribute through
Coops closeness to consumers and to all families.
Sustainability is obviously
a very pressing issue, how
will this be addressed at
the event?
Sustainability is a central
issue. Counter-posing it to cost
effectiveness is not the right
way to look at it. In fact the
opposite is true: it is possible
to produce and distribute in a
more effective as well as more
sustainable way. Im thinking
of innovative packaging
materials making it possible
to produce using less energy,
prolong products shelf life and
reduce waste. Of course this
requires investing in applied
research and not settling for
easy ways to increase profits.
Long-lasting enterprises are
the ones that take no shortcuts
and invest in honest, long-term
relationships with their clients.
Products and packaging will
exemplify all of these aspects
of sustainability. At the Milan
Expo, Coop will present a
selection of products, and more
specifically the lines Vivi Verde,
Fior Fiore, Senza Glutine, Bene
S, which represent the practical
application of these principles.
What do you believe are
the major issues facing the
global supply chain?
I believe many things will have
to be done to ensure efficiency
and sustainability on a national
and global scale. There is a
crucial pre-competitive area
requiring the cooperation
of all players - producers,
distributors, transporters, public
May 2015 | 49
F
IPACK-IMA is now a joint staging of six shows. What
sectors of the food industry will be covered?
The 2015 edition is set to be a major one for Ipack-Ima: it
will showcase technology for the fresh food industry. The
exhibition halls will give extensive room to one of the liveliest
sectors of the food and distribution industry, faced with new
consumption habits. Fresh food requires new, specific packaging
and packaging technology, which finds its perfect showcase at
Ipack-Ima, flanked by vertical exhibitions dedicated to the fresh
food technologies: Meat-Tech (processing and packaging for the
meat industry), Dairytech (processing and packaging for the dairy
industry), Fruit Innovation (dedicated to product innovation,
technologies and Services for the fruit and vegetables industry).
Ipack-Ima is now acknowledged by MISE as a top
15 show for its dedication to promoting Made in Italy
products. What does this recognition represent?
F
IPACK-IMA: International
Conference: May 20th
Designing a resilient future:
food, technology, and sustainable
development
The question of how to feed our planet with a population of
9-10 billion people by 2050, in a way that promotes health
and sustainability, economic strength, and cultural diversity
suggests that the business landscape of the agrofood sector
is headed for substantial disruption. Some of this disruption,
whether caused by climate change or diminishing resources,
is likely unavoidable. And yet with the magnitude of the
challenges ahead of us, too often our increasingly global
conversation about the future of food splits into disconnected
silos of perspectives, undermining opportunities for
integrated approaches to innovation.
In this one-day conference Designing a Resilient Future:
Food, Technology, and Sustainable Development, leading
experts will look at how we might better weave together
these sometimes unconnected voices and expertise into a
powerful model for change, linking technology and culture,
science and art, business and consumer interests.
Well examine risk and opportunity in current agrofood
chain models within the context of both developed and
developing economies, and forecast possible trajectories
of change in the years leading up to 2050. Well consider
the impacts of the future food choices of nine plus billion
people, and opportunities for leadership to better align
those preferences with available resources and a host of
sustainable, social and other imperatives.
Hydro-Probe XT
Conference programme
Hydro-Mix
2.00 pm Registration
Hydro-View
4.30 pm Break
4.45 pm Keynote Presentations
Good for You Good for the Planet: our way of doing
business
Paolo Barilla, Vice Chairman, Barilla G. e R. F.lli S.p.A
Inclusive and sustainable food chains: connecting mall
holder farmers in developing countries to agribusiness
multinationals
Philippe Scholts, Managing Director, Programme
Development and Technical Cooperation Division - Director
a.i., Agribusiness Development Branch, UNIDO
enquiries@hydronix.com
www.hydronix.com
Stand: B001
May 2015 | 51
India
India has over 5000 Rice mills, 1000 Flour milling plants,
200 Soybean plants, 2000 Spices crushing plant, 1500 Pulses
mills, 2000 Oilseeds crushing units, 1000 Feed Units, 100
Bio-fuel and energy projects, 1000 Coffee plants etc., looking
for new and better technology to upgrade their manufacturing,
processing, packaging line. GrainTech India 2015 will seek
to reduce the technology gap in processing as well as in the
supply chain.
STORAGE
www.symaga.com
symaga@symaga.com
Visit us:
SIAM
SIPSA
14 - 27th May,
Argel, Argelia
GRAINTECH
28 -30 th May
Dhaka, Bangladesh
STORAGE
F
Otherwise the materials should be left uncovered to aid in airflow.
Galvanised steel is subject to corrosion and discoloration if
moisture becomes entrapped between panels due to condensation,
which can lead to corrosion and discoloration.
Safety
k
l
a
t
s
t
e
Labout GRAIN
S
N
O
I
T
U
L
O
S
Celebrating 50 Years
www.lambtonconveyor.com
sales@lambtonconveyor.com
Tel: +1 519.627.8228
Toll Free: +1 888.239.9713 (North America)
Storage News
Storage project
The project, which began in April last year, is scheduled for completion at the end of May 2015. With its new manufacturing facility, the
companys goal is to become an European leader, not only in manufacturing turnkey grain storage projects, but also in modernity and
quality of its facilities, innovation and marketing strategies.
The project consists of two buildings. The main building, designed to house the manufacturing plant, has a rectangular floor plan and is
topped with a curved East faade. This area has a capacity of 10,000 square meters.
The other building, the administrative area, represents the corporate image of the company, and is designed by using its flagship
product, a steel silo, as an architectural element.
The new facilities will allow the optimisation of stock needed to manufacture the entire range of products the company has in the
market.
STORAGE
Mechanical Vs Pneumatic?
24/04/14
15:34
Unloading process
Bag Vacuumisers
Palletisers
Stretchhooders
CM
MY
CY
CMY
ARODO designs and develops bagging machines for foods that result in fully deaerated
plastic bags. This brings along a great deal of advantages to conventional packing:
S
G
A
B
E
G
R
A
L
R
FO
!
g
k
0
5
up to
ARODO BVBA
Tel. +32 14 67 23 32
sales@arodo.be
www.arodo.com
May 2015 | 63
Pneumatic or Mechanical
Ship Loaders & Unloaders
Port Equipment - Turnkey Projects
es of gra
p
y
t
in
All
A win-win solution
between customer expertise and VigAn know-how
VIGAN Engineering s.a. Rue de lIndustrie, 16 1400 Nivelles (Belgium)
Tl.: +32 67 89 50 41 Fax : +32 67 89 50 60 www.vigan.com info@vigan.com
Figure 4: Problem-free
transport of a heavy
bulldozer thanks to 15 t
load-bearing capacity
reaches the bulk material below the rim of the cargo hold without
requiring repositioning of the ship (with stationary systems) or
the unloader (with mobile systems). This flexibility significantly
speeds up the unloading process and minimises the need for
bulldozers for removal of bulk material residues.
Pneumatic: Pneumatic solutions can only adjust the position of
the conveying arm vertically or horizontally. This makes more
frequent repositioning of the ship or unloading system necessary,
which in turn reduces unloading velocity. The bulk material
below the rim of the cargo hold cannot be reached, requiring
bulldozers to be used earlier and leading to longer unloading
times.
Handling
Product protection
STORAGE
F
This takes time and increases unloading time and, in turn,
the berthing time of the ships, resulting in an increase in costs.
The basic advantage pneumatic systems offer, i.e. being able to
remove literally every grain from the hold, is countered by their
(physically determined) low residue unloading capacity.
The following simulation based on a comparison of unloading
systems with 600 t/h throughput and a Panamax ship shows just
how greatly the use of heavy bulldozers or bucket loaders can
impact the efficiency of the entire unloading process. While
the unloading time of the simulated ship comes to only 99
hours using the mechanical Portalink unloading system, with a
pneumatic unloader the complete process takes a total of 131
hours.
This enormous difference comes about not only through the
use of heavy bucket loaders to unload the material residues, but
also through the difference in throughput: While the Portalink
unloading system continues to unload at constant full capacity
as the level of bulk material sinks, with the pneumatic unloading
system, the throughput decreases by at least 10 percent as the
bulk material level decreases and the conduit pipes are extended
fully.
The overall efficiency of the mechanical Portalink system is 87
percent, whereas with the pneumatic system efficiency is only
66 percent. Here again, it should be pointed out that at lower
conveying capacities, the efficiency disadvantages of pneumatic
unloading systems illustrated here can be significantly lower.
STORAGE
F
strictly to environmental and occupational safety guidelines and
minimises the impact of noise on workers.
Pneumatic: In contrast to mechanical systems, the air suction
blower (roots type) employed in pneumatic unloading systems
produces an unpleasant noise frequency that is often perceived as
an annoyance, particularly at long distances. While multi-stage
fans produce less noise as a whole, at further distances, they
result in noise pollution similar to that of roots-type blowers.
Left - Figure 7: Automatic
sink-in function minimises
the need for repositioning
by operating staff
Energy consumption
Noise pollution
Costs
Industry profile
Entil
Tom Blacker and Darren Parris, marketing executives for Milling and
Grain magazine met with Mr Teoman Altinok and Mr Mehmet U
gur
Grkaynak
F CASE STUDY
CASE STUDY
Building mutual trust and long-term business relationships takes time and commitment. As a
part of its market development activities, one important activity US Wheat Associates (USW)
employs to create stronger partnerships with overseas customers is to invite them to have a
first-hand look at the US wheat crop. That is what a team of six-flour milling executives from
Japans leading milling companies will do during travel to the Pacific Northwest April 30 to May
8, 2015.
Japan imports large amounts of US wheat so it is important for the Japanese flour milling
industry to regularly exchange views and information with US wheat organisations and
businesses, said Mr Masaaki Kadota, executive director of Japans Flour Millers Association.
We really appreciate your efforts to support our needs as your customers.
USW collaborated with the Montana Wheat and Barley Committee, Oregon Wheat
Commission and Washington Grain Commission to organise and host this trade team.
The Oregon Wheat Growers League (OWGL) established the first overseas US wheat export
office in Tokyo in 1956 and in that same year, the first Japanese millers team visited the United
States to learn about its markets. After it was established, USW continued the tradition and for
well over a decade, this particular activity has become an annual trip for Japanese executive
millers. According to Kadota - who has accompanied this team for many years - there is always
something new to learn and discuss.
There is nothing better than strengthening the mutual trust I have with those whom I meet
each year, said Kadota.
The team will make stops in Oregon, Washington and Montana. During meetings with wheat
farmers, grain industry representatives and university researchers, the team will discuss the US
wheat supply and demand picture,
including potential quality, availability
and price. The team will also discuss
current views on competitive markets,
dietary trends and the role innovations
in wheat breeding will have in
balancing future world food supply
demands with the need for less impact
on the environment.
This exchange of dialogue and
information is essential to US trade
with Japan, said USW West Coast
Office Assistant Director Shawn
Campbell. When questions and
concerns arise, we rely on the trust
built during these activities to guide
us toward decisions that have a
positive impact for both US wheat
farmers and the Japanese milling
industry.
USW is the industrys market
development organisation working in
more than 100 countries. Its mission is to develop, maintain, and expand international markets
to enhance the profitability of US wheat producers and their customers. USW activities are
made possible through producer checkoff dollars managed by 19 state wheat commissions
and cost-share funding provided by USDAs Foreign Agricultural Service. USW maintains
17 offices strategically located around the world to help wheat buyers, millers, bakers, wheat
Wenger12_Feed_210x147mm.indd 1
TAIWAN
BRASIl
CHINA
TURkEY
INDIA
6/21/12 3:47 PM
May 2015 | 73
Industry events
2015
n 19-21 May
n 19-23 May
n 20 May
n 28-30 May
n 02-04 June
n 09-11 June
n 09 June
IGC
he IGC Grains Conference, one of the longestrunning and well established events on the
grains and oilseed calendar, will take place
in London at the Grosvenor House Hotel, London,
England on 9th June 2015. The conference, now
in its 24th year, will bring together traders, policy
makers, business leaders and government officials
from across the globe under the theme Building on
success, responding to challenges.
Providing a fantastic opportunity to network and
build relationships with some of the worlds most
prominent grains and oilseed professionals, the
agenda also features a pre-conference welcome
reception on the previous evening.
The main programme is split into five distinct
sessions, where panels of top industry experts will
examine the current challenges facing the global
grains economy through an assessment of supply
and demand fundamentals, futures markets and
environmental issues.
Confirmed speakers include Tim Andriesen,
Managing Director CME Group, Lu Jing Bo, Vice
Administrator State Administration of Grain, China
and Stefan Vogel, Head of Agri Commodity Markets
Research Rabobank.
www.igc.int/en/conference/programme.aspx
n 11-13 June
GRAPAS with Global Milling
Conference
n 24 June
n 27 June
n 29-31 July
n 18 August
n 09-11 September
#FutureFortified
Arusha, Tanzania
http://www.gainhealth.org
n 21-23 September
REVIEW
#FutureFortified:
F/V/G(Island):2015
Feed Ingredients
Nutrition
Additives
Specialist conferences:
The FIAAP Conference 2015
Petfood Forum Europe 2015
The IFF Feed Conference 2015
Aquafeed Horizons International 2015
Global Milling Conference with
GRAPAS INTERNATIONAL 2015
Biomass & Biomass Pelleting 2015
GMP+ International 2015
www.fiaap.com
www.victam.com
www.grapas.eu
May 2015 | 75
Industry events
Leading science and
agronomy on show at
Cereals 2015
REVIEW
solutions and product compatibility with the
fish oil in the oilseed crop Camelina sativa is another
TankmixIT App
area of work being highlighted there will be no GM
Maximising returns from N investment using tools
plants in the exhibit.
such as N-Tester, N-Sensor and ImageIT
Field margins for biocontrol and biodiversity across
The 20-minute seminars will be held on the Yara Stand
crop rotations, screening older wheat varieties for
604 at 10.30am and 2.30pm each day.
characteristics that can be used in the modern breeding
The practical role for integrated pest management
pool, and the BBSRC-HGCA blackgrass resistance
(IPM) will be a hot topic on the Certis stand. The UK
initiative to optimise weed and resistance management
government is required to show that UK growers are
for UK growers are also presented on the stand.
using IPM as part of the Sustainable Use Directive. That,
Cereals 2015 takes place on Wednesday 10th and
plus the ongoing loss of active ingredients used for crop
Thursday 11th June, at Boothby Graffoe, Lincolnshire.
protection, is a very real threat to arable farmers, says the
Tickets cost 24 each (20 for students) and are
company, whose team is providing practical advice on an
available at www.cerealsevent.co.uk
integrated approach to crop protection.
Cereals offers two NRoSO points and two BASIS
DSV is another company examining the establishment
points to members for attending the show. Further
of OSR crops without neonicotinoids, including drill
points are available from participating exhibitor stands.
date, plant populations and cultivation method.
www.cerealsevent.co.uk
The concept of undersowing
oilseed rape with legumes and
grass mixes will also be featured.
Early indications suggest this can
make crops more self-sufficient
nutritionally, improve soil condition
and suppress weeds, says the
company.
In addition the soil-conditioning
capabilities of DSVs TerraLife
range of cover crop mixes will be
demonstrated.
AICC is launching its new
bespoke academy for new entrants
working alongside established
AICC members. The aim is to
Building on success, responding to challenges
provide these new entrants post
BASIS with a sound technical
platform in preparation for a career
in independent agronomy.
AICC will also highlight the
value of best practice and good
science as drivers of production,
rather than highest spend. Using the
back drop of demonstration plots,
representatives of the AICC are
running pop-in sessions at 10am
and 2pm each day to demonstrate
how they plan for the season and
the independent decision making
process they adopt.
Rothamsted Research will be
at Cereals together with the
John Innes Centre presenting
developments in strategic research
funded by the Biotechnology and
Biological Sciences Research
Council (BBSRC) and others.
Work investigating the
competitiveness of wheat cultivars
to help growers get more from their
weed control strategies will be on
display.
Using GM to produce a
sustainable source of omega-3
May 2015 | 77
REVIEW
REVIEW
Darren Parris talking with Imas about the recent lauch of Viteral
or contact
Dr. Mian N. Riaz
mnriaz@tamu.edu
979-845-2774
#GGTOUR2015 | www.tour2015.org
May 2015 | 79
REVIEW
SIGNATURES
With a stand that resembles an up market office or car show room with boardrooms for meetings,
lounge area, bar, kitchen and stage for the musicians. Alapala went all out to impress this year at
IDMA. Everybody was talking about the Alapala stand, with more than 20 sales staff on hand to deal
with all their international customers in whichever language was preferred, Alapala were ready for
anything. And judging by how busy their stand was every day, I suspect great business was done
over the four days. What will 2017 bring?
Cimbria
REVIEW
Muhlenchemie group
the calibre of attendees was very high with the majority having
key decision-making responsibilities. This again allowed for
many agreements and contracts to be finalised over the four
days of the event.
It was interesting to note that the 10 leading nations for
visitor numbers were: Iran, Bulgaria, Russia, Ukraine, Libya,
Greece, Pakistan, Germany, Morocco and Egypt. This not only
meant that our Arabic edition of Milling and Grain was well
received; this also set the scene, making it a significant show
for millers.
The official opening ceremony commenced at 11am on
Thursday 23rd April, which was well attended with an
international audience and all speeches in both Turkish and
English. This year, the show had doubled in size and was held
at a larger venue since the previous time two years ago. Mr M
Fethullah Akatay, Overseas Director for the event organisers
gave the first opening speech. He expressed his delight at the
very high standard of the international exhibitors and visitors
to the IDMA expo. He also welcomed everyone from the
different flour milling organisations around the world, to this,
the biggest ever IDMA. Following on from Mr Fethullah
Akatay were heads of many global organisations from India,
Montenegro, Croatia, Ethiopia, Algeria and Turkey. After the
opening speeches, all lined up for the ribbon cutting ceremony,
which signaled the official opening of this global event.
After the ceremony, the dignitaries toured a variety of
stands in Hall one, which included Alapala. The international
dignitaries to Alapala were welcomed onto their very large and
impressive stand where they could relax in comfortable chairs
and view individual i-pads delivering information on all the
Alapala milling products. The giant wooden stand structure of
REGISTER NOW
for FREE entrance at
www.viv.net
Special Events
REVIEW
Left to right: Pingle and Tom & Darren
May 2015 | 83
REVIEW
Die and roll re-working machines
www.oj-hojtryk.dk
Phone: +45 75 14 22 55
Fax: +45 82 28 91 41
mail: info@oj-hojtryk.dk
REVIEW
T u r n k ey
Feed Mill
Systems
w w w. y e m t a r. c o m
REVIEW
Tom Blacker with Suzan Kizilok from Bastak
WORLDWIDE CALENDAR
2015 - 2018
VIV MEA 2016
WWW.VIV.NET
May 2015 | 87
REVIEW
Muhlenchemie had a fully operational baker, kitchen and oven at their stand.
Visitors were able to sample freshly kneeded white bread rolls. In our case, it was
Thomas Hanke who invited us over and we sampled the freshly baked, bignetsized bread straight from the tray. It was hot and tasty. Other visitors to the stand
soon joined in with the pleasurable food. Freshly baked rolls were produced by
Muhlenchemies master baker, Michael Saathoff. Michael works in the Research
and Development with well-known and distinguished expert, Dr Lutz Popper.
2/23/15
REVIEW
5:11 PM
CM
MY
CY
CMY
May 2015 | 89
Colour sorters
Andritz
+45 72 160300
Bhler AG
www.andritz.com
+41 71 955 11 11
www.buhlergroup.com
Insta-Pro International
+1 515 254 1260
Satake
www.insta-pro.com
Wenger Manufacturing
+1 785-284-2133
Computer software
Adifo NV
+32 50 303 211
Analysis
www.wenger.com
Feed processing
www.adifo.com
Mechanika Nawrocki
R-Biopharm
+48 52 303 40 20
www.granulatory.com/en
www.r-biopharm.com
www.culturatech.com
Romer Labs
Ottevanger
+31 79 593 22 21
www.romerlabs.com
www.formatinternational.com
www.ottevanger.com
Amino acids
Wynveen
Evonik
Consergra s.l
+31 26 47 90 699
www.wynveen.com
www.evonik.com
www.consergra.com
Bag closing
FrigorTec GmbH
Flour
Rank Hovis
Fischbein SA
+32 2 555 11 70
www.frigortec.com
www.fischbein.com/eastern
Geelen Counterflow
Cetec Industrie
+33 5 53 02 85 00
www.geelencounterflow.com
www.cetec.net
Famsun (Muyang)
AB
+46 42 85802
www.muyang.com
www.cargotec.com
Bakery improvers
Mhlenchemie GmbH & Co KG
+49 4102 202 001
www.muehlenchemie.de
Elevator buckets
Alapala
Bin dischargers
Denis
www.alapala.com
+33 2 37 97 66 11
STIF
www.denis.fr
+33 2 41 72 16 80
Bulk storage
www.stifnet.com
Cimbria A/S
+45 96 17 90 00
www.cimbria.com
Hammermills
Bhler AG
+41 71 955 11 11
www.buhlergroup.com
Tapco Inc
Bentall Rowlands
Dinnissen BV
www.bentallrowlands.com
www.tapcoinc.com
VAV
+31 71 4023701
www.vav.nl
www.chief.co.uk
Croston Engineering
4B Braime
www.croston-engineering.co.uk
www.go4b.com
Enzymes
www.dinnissen.nl
Genc Degirmen
+90 332 444 0894
www.gencdegirmen.com.tr
Van Aarsen International
+31 475 579 444
www.aarsen.com
Yemtar Feed Mill Machines
www.sce.be
AB Vista
Silos Cordoba
www.yemtar.com
www.abvista.com
www.siloscordoba.com
JEFO
+86 21 64188282
TSC Silos
www.zhengchang.com
www.jefo.com
www.tsc-silos.com
Westeel
Certification
GMP+ International
Laboratory equipment
Bastak
ExtruTech Inc
www.bastak.com.tr
www.extru-techinc.com
Brabender
+49 203 7788 0
Extruders
www.brabender.com
+31703074120
Almex
www.gmpplus.org
Zheng Chang
CHOPIN Technologies
+33 14 1475045
www.chopin.fr
Palletisers
Silos
+49 4087976770
Cetec Industrie
www.doescher.com
+33 5 53 02 85 00
Hydronix
www.cetec.net
www.globalindinc.com
Ehcolo A/S
www.hydronix.com
+45 75 398411
Obial
+90 382 2662120
www.ehcolo.com
Level measurement
www.obial.com.tr
PAYPER, S.A.
+34 973 21 60 40
MYSILO
www.payper.com
www.binmaster.com
www.mysilo.com
Pelleting aids
Borregaard LignoTech
Symaga
+47 69 11 80 00
+34 91 726 43 04
www.fine-tek.com
www.lignotechfeed.com
www.symaga.com
Loading/un-loading equipment
Pest control
Tornum AB
Neuero Industrietechnik
www.tornum.com
www.neuero.de
www.rentokil.co.uk
Vigan Engineering
Pipe systems
+32 67 89 50 41
Bhler AG
+41 71 955 11 11
www.buhlergroup.com
Agromatic
Jacob Sohne
www.vigan.com
Temperature monitoring
+41 55 2562100
www.agromatic.com
www.jacob-pipesystems.eu
Dol Sensors
Used around
all industrial
Process
control
sectors.
Mechanika Nawrocki
52 303 40 20
www.granulatory.com/en
Golfetto Sangati
Training
Bhler AG
Suffolk Automation
www.golfettosangati.com
+41 71 955 11 11
www.buhlergroup.com
www.suffolk-automation.co.uk
IAOM
Rolls
www.iaom.info
IMAS - Milleral
www.breitenbach.de
O&J Hjtryk
www.grains.k-state.edu
Mechanika Nawrocki
nabim
+48 52 303 40 20
www.oj-hojtryk.dk
www.milleral.com
www.granulatory.com/en
www.nabim.org.uk
Roller mills
Oryem
Unormak
Ocrim
www.oryem.com.tr
www.unormak.com.tr
www.ocrim.com
Ugur Makina
Satake
NIR systems
www.ugurmakina.com
Roll fluting
+34 965564075
www.balaguer-rolls.com
Safety equipment
+1 9786 421132
Rembe
www.thermoscientific.com
Packaging
Cetec Industrie
+33 5 53 02 85 00
www.cetec.net
Mondi Group
+43 1 79013 4917
www.mondigroup.com
Peter Marsh Group
+44 151 9221971
www.petermarsh.co.uk
NIR Online
Valves
Vibratory equipment
Mogensen
Raw
Materials
Handling
+44 1476 566301
www.mogensen.co.uk
Sanderson Weatherall
Vibrafloor
+33 3 85 44 06 78
www.sw.co.uk
www.vibrafloor.com
Weighing equipment
Sifters
Filip GmbH
www.filip-gmbh.com
www.parkerfarm.com
Genc Degirmen
+90 332 444 0894
www.gencdegirmen.com.tr
Yeast products
Leiber GmbH
+49 5461 93030
www.leibergmbh.de
the interview
Victam is one of the worlds largest and foremost international events for animal feed ingredients processing
technology, biomass-pelleting systems, flour milling and grain processing.
The 2015 event marks a very special year, it is the 50th anniversary of the exhibition which will once again
combine the FIAAP, VICTAM and GRAPAS exhibitions, and their respective conferences under one roof at
Koelnmesse in Cologne.
FIAAP exhibitors will be displaying ingredients and additives that are so necessary for the successful
formulation of animal feed, aquafeed, dry petfood and speciality feeds. The VICTAM exhibits will cover
the very latest technology and system used in the manufacture and processing of these animal feeds,
aquafeed, dry pet food and speciality feeds.
A large number of companies will be exhibiting the essential ancillary equipment that is so necessary for
the smooth operation of a feed mill, flourmill or a rice mill. The latter two will be profiled in the GRAPAS trade
show as this exhibition covers grain processing, storage and transportation, flour and rice milling technology,
as well as, pasta, breakfast cereal and extruded snack production. Henk van de Bunt has been General
Manager of the show since 1999.
Kostas Syriopoulos
n April 1st, Kostas Syriopoulos (37) joined Delacon as Customer Technical Service
Manager, Swine team. Located at the Delacon Headquarters in Austria, Kostas completes
the technical team for Swine as an MSc nutritionist. Reporting directly to our Species
Leader for Swine Ester Vinyeta, Kostas Syriopoulos will be involved in customer technical
service in various countries, especially in Western, Central and Eastern Europe, Middle East and Africa,
and will support Ester Vinyeta in swine product management and development.
I am happy that Kostas Syriopoulos joined Customer Technical Services to complete our swine
team. Since the start of this year, Delacon has integrated the Research and Development department and the Species Leader/
Customer Technical Services teams in a new Products and Innovation division to improve the efficiency of new product
development, reduce time to market and improve sales support. With Kostas in our team we will be able to further improve
our services, says Jan Dirk van der Klis, Head of Products and Innovation.
Kostas Syriopoulos is well experienced in swine nutrition, feed formulation, feed evaluation and feed technology. Recently,
he served as Feed Evaluation Manager at Agrifirm Innovation Centre in the Netherlands. Prior to that he served as nutritionist
and quality manager in LAKY SA, a large feed mill in Greece. Kostas Syriopoulos studied Animal Science with emphasis
on animal husbandry at the Agricultural University of Athens and holds a masters degree from Wageningen University
(Netherlands) where he focused on Swine Nutrition and Feed Technology.
reat Western Manufacturing is proud to announce the induction of Jim Schroeder into the
Kansas State University College of Engineering Hall of Fame. Mr Schroeder graduated
from Kansas State University in 1963, with a degree in electrical engineering. He later cofounded Great Western Manufacturing Company, Inc., the oldest continuous manufacturing
Jim Schroeder company in Kansas, growing the company from a supplier of sifting equipment for the flour milling
and cereal grain industry into one of the leading manufacturers of quality control sifting equipment
for the food processing industry. Although he retired from the company in 2012, Schroeder remains
actively involved in an advisory capacity. Schroeder is a long time member of the International Association of Operative
Millers, and is a recipient of its Allied Trades Award. He was named Alumni Fellow of the College of Engineering at Kansas
State University in 1996, and has served on the College of Engineering Advisory Council. He has also served on numerous
local boards and as president of the Cushing Hospital Board.
lltech has continued to invest in its comprehensive mycotoxin management service and
product offering by promoting Nick Adams to the post of global director to lead strategy for
the successful unit established in 2011. Adams has been with Alltech for more than 15 years,
starting in the UK and then spending eight years in California.
Nick Adams
Previously global sales director, Adams will ensure the companys now 50 strong Mycotoxin
Management team remains focused on delivering exceptional value for key distributors and livestock
farmers across the world.
My goal is to further develop the Alltech 37+ mycotoxins analysis programme and extend the MIKO risk assessment
service to as many farmers as possible. It has been very encouraging to see such positive feedback from customers since we
launched the programme and we have seen significant business growth as a result. We want to sustain this momentum, so
will be investing in additional analytical technologies and facilities too, said Adams. Alltech has also appointed experienced
marketer Jonathan Younger as global marketing manager, Mycotoxin Management team, who will be based in Stamford, UK.
Younger has over 17 years experience and held a number of senior marketing roles in both B2B and B2C organisations in
sectors ranging from consumer magazines, professional services and renewable energy.
he pioneer and global leader in plant based (phytogenic) feed additives, Delacon, exports to 50
countries and the global team is constantly growing. To strengthen the operations in the US,
Delacon appoints Sonny Pusey as Regional Manager North America (USA, Canada). He takes
over the Delacon leadership in the US and in Canada.
Located in Indiana, Sonny will be responsible for sales in the US and Canada. My business view
has always been oriented to help and support the commercial livestock producers by providing them my
honest advice and the nutritional tools to improve their business. With Delacons phytogenic products, I am
confident I will be providing livestock producers with research proven alternatives to antibiotic growth promoters. Sonny
Pusey has worked for Purina Animal Nutrition for the past 35 years occupying various sales and management positions.
Recently, he was in charge of the business development for the National Swine and Poultry Sales team.
Sonny Pusey
Strong partner in
Grain Management.
One of the big challenges of our age is to supply all the people worldwide with food. Every year, millions of tons of grain
are collected, stored, and handled around the globe and the upward trend is unbroken. Only the most up-to-date plant
and equipment can guarantee rapidity and quality while minimizing raw material losses. In order to meet the increasingly stringent challenges, Bhler Grain Logistics provides with its capabilities the best possible solution for conveying,
cleaing, drying, storing, dedusting or loading and unloading the most important commodity on earth.www.buhlergroup.com