Académique Documents
Professionnel Documents
Culture Documents
INTERNAL
Notice
The purchased products, services and features are stipulated by the contract made between
Huawei and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise
specified in the contract, all statements, information, and recommendations in this document
are provided "AS IS" without warranties, guarantees or representations of any kind, either
express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a warranty
of any kind, express or implied.
2014-12-11
[]
INTERNAL
1.2 IMSI
Format: IMSI=<IMSI number>
Description: a string which contains 5 to 16 digits, in a format similar to
TBCD format.
1.3 MSISDN
Format: MSISDN=<Primary MSISDN>
Description: a string which contains up to 16 digits, in a format similar to
TBCD format.
1.4 SID
Format: SID=<SID>
Description: a string which contains 16 hexadecimal digits.
1.6 CCNDC
Format: CCNDC=<country code + network code>
Description: a string of 3 to 5 digits. If MSISDN contains the string, the
parameter can be omitted.
2014-12-11
[]
INTERNAL
1.7 CURRENTNAM
Format: CURRENTNAM=<NAM>
Description: Network access mode of the user, a string, with a single value. Value range:
BOTH
NONGPRS
/*only MSC*/
GPRS
/*only SGSN*/
1.8 CAT
Format: CAT=<Category>
Description: a string, with a single value. Value range:
UNKNOWN /*unidentified type*/
FRENCH
ENGLISH
GERMAN
RUSSIAN
SPANISH
SPECIAL1
SPECIAL2
SPECIAL3
RESERVE
COMMON
/*common user*/
SUPERIOR
/*super user*/
1.9 LOCK
Format: LOCK=<lock>
Description: a string, with multiple values. Value range:
LOCKIN: Barring incoming calls of the user
LOCKOUT: Barring outgoing calls of the user
SABOUT: The user applies for barring outgoing calls actively
2014-12-11
[]
INTERNAL
1.10 UPLCSLCK
Format: UPLCSLCK=<UPLCSLCK>
Description: a string, with a single value. Value:
YES: Deny location updates for CS domain
NO: Allow location updates for CS domain
1.11 UPLPSLCK
Format: UPLPSLCK=<UPLPSLCK>
Description: a string, with a single value. Value:
YES: Deny location updates for PS domain
NO: Allow location updates for PS domain
1.12 TBS
Format: TBS=<BasicService>
Description: Basic service (including telecom services and bearer services) string, with
multiple values. Value range:
/*telecom service*/
TS11: telephony
TS12: emergencyCalls
TS21: shortMessageMT_PP
TS22: shortMessageMO_PP
TS61: facsimileGroup3AndAlterSpeech
TS62: automaticFacsimileGroup3
TS63: facsimileGroup4
ALLPLMNTS: allPLMN_SpecificTS
PLMNTS1: plmn_specficTS_1
PLMNTS2: plmn_specficTS_2
PLMNTS3: plmn_specficTS_3
PLMNTS4: plmn_specficTS_4
2014-12-11
[]
INTERNAL
PLMNTS6: plmn_specficTS_6
PLMNTS7: plmn_specficTS_7
PLMNTS8: plmn_specficTS_8
PLMNTS9: plmn_specficTS_9
PLMNTSA: plmn_specficTS_A
PLMNTSB: plmn_specficTS_B
PLMNTSC: plmn_specficTS_C
PLMNTSD: plmn_specficTS_D
PLMNTSE: plmn_specficTS_E
PLMNTSF: plmn_specficTS_F
/*bearer service*/
BS21: dataCDA_300bps
BS22: dataCDA_1200bps
BS23: dataCDA_1200_75bps
BS24: dataCDA_2400bps
BS25: dataCDA_4800bps
BS26: dataCDA_9600bps
BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE
BS2G: general_dataCDA
BS31: dataCDS_1200bps
BS32: dataCDS_2400bps
BS33: dataCDS_4800bps
BS34: dataCDS_9600bps
BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE
BS3G: general_dataCDS
BS40: allPadAccessCA_Services
BS41: padAccessCA_300bps
BS42: padAccessCA_1200bps
BS43: padAccessCA_1200_75bps
BS44: padAccessCA_2400bps
2014-12-11
[]
INTERNAL
BS46: padAccessCA_9600bps
BS50: allDataPDS_Services
BS51: dataPDS_2400bps
BS52: dataPDS_4800bps
BS53: dataPDS_4800bps
BS61: allAlternateSpeech_DataCDA
BS62: allAlternateSpeech_DataCDS
BS81: allSpeechFollowedByDataCDA
BS82: allSpeechFollowedByDataCDS
1.13 ODBIC
Format: ODBIC=<OdbIncomingCall>
Description: Incoming call barring decided by the operator, a string, with a single value.
Value range:
BAIC: barring of all incoming call
BICROAM: barring of incoming calls when roaming outside home PLMN country
NONE: (default) no barring
1.14 ODBOC
Format: ODBOC=<OdbOutgoingCall>
Description: Outgoing call barring decided by the operator, a string, with a single value.
Value range:
BAOC: barring of all outgoing calls
BOIC: barring of outgoing international calls
BOICEXHC: barring of outgoing international call s except those direct to the
home PLMN
BOCROAM: OdbOutgoingCallsWhenRoaming
NONE: (default) no barring
1.15 ODBROAM
Format: ODBROAM=<OdbRoaming>
Description: Roaming barring service decided by the operator, a string, with a single
value. Value range:
ODBOH: baring of roaming when the user roams outside the home PLMN
2014-12-11
[]
1.16 ODBPRC
Format: ODBPRC=<Odb Premium rate calls>
Description: barring high-rate entertainment and information calls decided by the
operator, in a single column, with multiple values. Value range:
ENTER: barring of entertainment calls
INFO: barring of information calls
NONE: (default) no barring
1.17 ODBPLMN
Format: ODBPLMN=<OdbPlmn>
Description: a string, in a single column, with multiple values. Value range: PLMN1,
PLMN2, PLMN3, PLMN4, NONE (default).
1.18 ODBPOS
Format: ODBPOS=<OdbPos>-<OdbPosType>
Description: a string, with a single value, multiple columns, with multiple values. Value
range:
Column 1: <OdbPos> value range: NOBPOS, BAPOS, BHPLMNAPROAM,
BALLAPROAM;
Column 2: <OdbPosType> value range: BOTH, MS, NET
1.19 OBRF
Format: OBRF=<Odb reg cf>
Description: a string, with a single value. Value range:
OBRFALL, OBRFIN, OBRFINEXH, OBRFZ, OBRFZEXH
1.20 ODBECT
Format: ODBECT=<Odbect>
Description: a string, with a single value. Value range:
ODBAECT: OdbAllECT
ODBCECT: OdbChargeableECT
ODBIECT: OdbInternationalECT
2014-12-11
[]
INTERNAL
1.21 ODBDECT
Format: ODBDECT=<OdbDEct>
Description: a string, with a single value. Value: YES, NO
1.22 ODBMECT
Format: ODBMECT=<OdbMEct>
Description: a string, with a single value. Value: YES, NO
1.23 ODBPREMSMS
Format: ODBPREMSMS=<ODBPREMSMS>
Description: whether to bar the PREMSMS, Value: YES, NO
1.24 ODBADULTSMS
Format: ODBADULTSMS=<ODBADULTSMS>
Description: whether to bar the ADULSMS, Value: YES, NO
1.25 SUBRES
Format: SUBRES=<restriction>
Description: Restriction type, a string, with a single value. Value range:
ALLPLMN: All_GSM_PLMNS
ONEAFPLMN: OneNationalAndAllForeign_GSM_PLMNS
HPLMN: RegionallyRestricted
RRTEMPLATE: Regional Roaming from RRTPL
Default value: ONEAFPLMN
1.26 VLRLIST
Format: VLRLIST=<VlrList>
Description: A numerical string, with a single value, representing VLR roaming
restriction template
1.27 SGSNLIST
Format: SGSNLIST=<SgsnList>
Description: A numerical string, with a single value, representing SGSN roaming
restriction template
2014-12-11
[]
2014-12-11
[]
INTERNAL
2014-12-11
[]
1.39 ODBSS
Format: ODBSS=<OdbSs>
Description: Barring of supplementary services decided by the operator, a string, with a
single value. Value:
YES: barring of the supplementary service of the user
NO: no barring
1.40 SMDP
Format: SMDP=<short message deliver path>
Description: short message deliver path, a string, with a single value. Value:
MSC: transfer short messages from the MSC preferentially
SGSN: transfer short messages from the SGSN preferentially
1.41 NAEA
Format: NAEA=<naea code>
Description: access code of equal access, a string consisting of 4 hexadecimal digits,
with a single value
1.42 NLR
Format: NLR=<number location register>
Description: number migration, with a single value. Value range:
GSM: The number is migrated only in the CS domain.
GPRS: The number is migrated only in the PS domain.
BOTH: The number is migrated in both domains.
1.43 VVDN
Format: VVDN=<VVDN>
Description: voice/video double number service, a string, with a single value. Value:
YES, NO
1.44 DEFCALL
Format: DEFCALL=<BasicService>
Description: default call (including telecom service and bearer service) string, with a
single value. Value range:
/*telecom service*/
2014-12-11
[]
INTERNAL
TS11: telephony
TS12: emergencyCalls
TS21: shortMessageMT_PP
TS22: shortMessageMO_PP
TS61: facsimileGroup3AndAlterSpeech
TS62: automaticFacsimileGroup3
TS63: facsimileGroup4
TSD1: AUXILIARY TELEPHONY
/*bearer service*/
BS21: dataCDA_300bps
BS22: dataCDA_1200bps
BS23: dataCDA_1200_75bps
BS24: dataCDA_2400bps
BS25: dataCDA_4800bps
BS26: dataCDA_9600bps
BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE
BS2G: general_dataCDA
BS31: dataCDS_1200bps
BS32: dataCDS_2400bps
BS33: dataCDS_4800bps
BS34: dataCDS_9600bps
BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE
BS3G: general_dataCDS
BS41: padAccessCA_300bps
BS42: padAccessCA_1200bps
BS43: padAccessCA_1200_75bps
BS44: padAccessCA_2400bps
BS45: padAccessCA_4800bps
BS46: padAccessCA_9600bps
BS51: dataPDS_2400bps
BS52: dataPDS_4800bps
BS53: dataPDS_4800bps
2014-12-11
[]
INTERNAL
BS62: allAlternateSpeech_DataCDS
BS81: allSpeechFollowedByDataCDA
BS82: allSpeechFollowedByDataCDS
1.45 RBTINDEX
Format: RBTINDEX=<RBT index>
Description: CRBT selection code, with a single value. Value range: 0254
1.46 IST_ALERT_TIMER
Format: IST_ALERT_TIMER=<IST_ALERT_TIMER>
Description: IST alert timer, with a single value. Value range: 0255
1.47 IST_ALERT_RESPONSE
Format: IST_ALERT_RESPONSE=<IST_ALERT_RESPONSE>
Description: IST alert response, with a single value. Value range: 04
1.52 SUB_AGE
Format: SUB_AGE=<SUB_AGE>
Description: service age indicator, with a single value. Value range: 016777215
2014-12-11
[]
INTERNAL
1.53 CATEGORYROUTE
Format: CATEGORYROUTE=<CATEGORYROUTE>
Description: route category, with a single value. Value range: 1255
1.54 ACR
Format: ACR=<ACR>
Description: auto call redirect, with a single value. Value range: 0255
1.55 NRBT_INDEX
Format: NRBT_INDEX=<NRBT_INDEX>
Description: NRBT index, with a single value. Value range: 165535
1.56 ACR_STATUS
Format: ACR_STATUS=<ACR_STATUS>
Description: ACR provision flag, with a single value. Value range: 02
1.57 STANDBY_IMSI
Format: STANDBY_IMSI=<Standby IMSI number>
Description: a string which contains 16 digits, in a format similar to TBCD.
1.58 EXPIRY_DATE
Format: EXPIRY_DATE=<EXPIRY_DATE>
Description: expiry Date, with a single value. Value range: 09999999999
1.59 MCSISTATE
Format: MCSISTATE=<MCSISTATE>
Description: M_CSI state, a string, with a single value. Value: YES, NO
1.60 OCSISTATE
Format: OCSISTATE=<OCSISTATE>
Description: O_CSI state, a string, with a single value. Value: YES, NO
1.61 TCSISTATE
Format: TCSISTATE=<TCSISTATE>
Description: T_CSI state, a string, with a single value. Value: YES, NO
2014-12-11
[]
1.63 EXEXROUTECATEGORY
Format: EXEXROUTECATEGORY=<EXEXROUTECATEGORY>
Description: extended enhanced category service template, with a single value. Value
range: 12147483647
1.64 PROFILE_ID
Format: PROFILE_ID=<PROFILE_ID>
Description: subscription identifier, with a single value, a string which contains 3
decimal digits. Default value: 1
1.65 EPS_PROFILE_ID
Format: EPS_PROFILE_ID=<EPS_PROFILE_ID>
Description: subscription identifier, with a single value, a string which contains 3
decimal digits. Default value: 1
1.66 STNSR
Format: STNSR=<STNSR>
Description: Session Transfer Number for SRVCC. Value range: 315 decimal digits,
with a single value
1.67 APNOI
Format: APNOI=<APNOI>
Description: APN operator identifier, with a single value. Value range: a string which
contains 163 digits
Default value#
1.68 TGPPAMBRMAXUL
Format: TGPPAMBRMAXUL=<TGPPAMBRMAXUL>
Description: a numerical string, with a single value. Value range: 14294967295, user's
maximum uplink bandwidth
1.69 TGPPAMBRMAXDL
Format: TGPPAMBRMAXDL=<TGPPAMBRMAXDL>
Description: a numerical string, with a single value. Value range: 14294967295, user's
maximum downlink bandwidth
1.70 RATFREQSELPRI
Format: RATFREQSELPRI=<RATFREQSELPRI>
2014-12-11
[]
1.71 PLMNTPLID
Format: PLMNTPLID=<PLMNTPLID>
Description: PLMN roaming restriction template ID, with a single string. Value range:
065534
1.72 DIAMNODETPL_ID
Format: DIAMNODETPL_ID=<DIAMNODETPL_ID>
Description: 065534 Diameter roaming restriction template ID, with a single string.
Value range: 065534
1.73 LTEAUTOPROV
Format: LTEAUTOPROV=<LTEAUTOPROV>
Description: Whether the HSS provides long term evolution (LTE) services
for a subscriber that has not been defined in the EPS.
Value:
TRUE: The HSS provides LTE services for a subscriber that has not been defined in the
EPS, and the HSS notifies the provisioning system of the LTE service provisioning.
FALSE: The HSS does not provide LTE services for a subscriber that has not been
defined in the EPS.
AUTOTPLUSER: The convergent HSS uses a template to provide LTE services for a
subscriber that has not been defined in the EPS.
AUTOUSER_NN: The HSS provides LTE services for a subscriber that has not been
defined in the EPS, but the HSS does not notify the provisioning system of the LTE
service provisioning.
AUTOTPLUSER_NN: The convergent HSS uses a template to provide LTE services for a
subscriber that has not been defined in the EPS, but the HSS does not notify the
provisioning system of the LTE service provisioning.
Default value: FALSE
1.74 MPS
Format: MPS=<MPS>
Description: Specifies whether the HSS provides the Multimedia Priority Service (MPS)
for a subscriber.
Value:
2014-12-11
[]
INTERNAL
1.75 TAUTIMER
Format: TAUTIMER=<TAUTIMER>
Description: Specifies whether the HSS updates the routing areas or tracking areas for
subscribers. Value range: 043200.
The default value 0 indicates that the HSS does not update the routing areas and tracking
areas for subscribers. When the parameter value is changed from a non-zero value to 0, the
HSS sends a DSR message to the MME or S4SGSN.
143200 (in minutes): It indicates the interval at which the HSS updates the routing
areas or tracking areas for subscribers.
2014-12-11
[]
INTERNAL
2014-12-11
[]
Feature
M/
O
INTERNAL
Description
ODB-all-APN
ODB-HPLMN-APN
ODB-VPLMN-APN
ODB-all-OG
ODB-all-InternationalOG
ODB-all-InternationalOGNotToHP
LMN-Country
ODB-all-InterzonalOG
ODB-all-InterzonalOGNotToHPL
MN-Country
ODB-all-InterzonalOGAndInternati
onalOGNotToHPLMN-Country
RegSub
Regional Subscription.
10
Trace
Trace Function
11
LCS-all-PrivExcep
12
LCS-Universal
13
LCS-CallSessionRelated
14
LCS-CallSessionUnrelated
15
LCS-PLMNOperator
2014-12-11
[]
INTERNAL
16
LCS-ServiceType
17
LCS-all-MOLR-SS
18
LCS-BasicSelfLocation
19
LCS-AutonomousSelfLocation
20
LCS-TransferToThirdParty
21
SM-MO-PP
22
Barring-OutgoingCalls
23
BAOC
24
BOIC
25
BOICExHC
26
Feature bit: The order number of the bit within the Supported-Features AVP, for example "1".
Feature: A short name that can be used to refer to the bit and to the feature, for example.
"ODB-HPLMN-APN".
M/O: Defines if the implementation of the feature is mandatory ("M") or optional ("O").
Description: A clear textual description of the feature.
2014-12-11
[]
2014-12-11
[]
INTERNAL
Description: MME registration and purge time, with a single value. Value range:
09999999999
1.90 FWDSUP
Format: FWDSUP=<forwardingSuppression>
Description: forwarding suppression. Value: YES, NO
1.91 ZCLOCK
Format: ZCLOCK=<ZCLOCK>
Description: Zone cell lock. Value: YES, NO
1.92 MBRCTRL
Format: MBRCTRL=<DenyDirectCall>&<DenySMS>
Description:
Column 1: DenyDirectCall: Whether the HSS/HLR restricts the direct calls placed to a
GROUPSIM member. Value:
1: Deny: cannot receive calls
0: Allow: can receive calls
Default value: 0
Column 2: DenySMS: Whether the HSS/HLR restricts the short messages sent to a
GROUPSIM member. Value:
1: Deny: cannot receive short messages
0: Allow: can receive shot massages
Default value: 0
1.93 PNP
Format: PNP=<PNPPROV>-<PNP_INDEX>
Description: PNP provision, multiple columns
Column 1: <PNPPROV> Whether to provide the PNP service, value: YES,
NO
<PNPPROV>, PNP provision identifier, value: YES, NO
2014-12-11
[]
2 Supplementary Services
2.1 CB
Format: CB=<SsCode>-<BasicServ>-<Status>
Description: multiple columns
Column 1: <SsCode> code of supplementary services of the barring types, a string,
with a single value. Value range: BAOC, BOIC, BOICEXHC, BAIC, BICROAM,
BOCROAM
Column 2: <BasicServ> basic service (group), a string, with a single value. Value
range:
/*telecom service*/
TS10: allSpeechTransmissionServices, TS11
TS20: allShortMessageServices, TS21, TS22
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
TS70: allDataTeleservices
TS80: allTeleservices_ExceptSMS
TSD0: allPLMN_SpecificTS, TSD1-TSDF
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46,
BS4G
BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G
BS60: allAsynchronousServices
BS68: allSynchronousServices
BSD0-BSDF
The value is (default) ALL only in the PROVIDE status: The parameter means
valid services subscribed by all subscribers.
Column 3: <SsVector> supplementary service status, a string, with a single
value. Value range:
PROV: Provide
ACT: ACTIVE_OPERATIVE, activate
QUC: ACTIVE_QUIESCENT, sleep
2014-12-11
[]
INTERNAL
2.2 CW
Format: CW=<SsCode>-<BasicServ>-<Status>
Description: multiple columns
Column 1: <SsCode> code of supplementary services of the waiting types, a string,
with a single value. Value: CW
Column 2: <BasicServ> basic service (group), a string, with a single value. Value
range:
/*telecom service*/
TS10: allSpeechTransmissionServices, TS11
TS20: allShortMessageServices, TS21, TS22
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
TS70: allDataTeleservices
TS80: allTeleservices_ExceptSMS
TSD0: allPLMN_SpecificTS, TSD1-TSDF
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46,
BS4G
BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G
BS60: allAsynchronousServices
BS68: allSynchronousServices
BSD0-BSDF
The value is (default) ALL only in the PROVIDE status: The parameter means
valid services subscribed by all subscribers.
Column: <SsVector> supplementary service, a string, with a single value. Value:
PROV: Provide
ACT: ACTIVE_OPERATIVE, activate
Note: PROV is the default value.
2.3 PW
Format: PW=<CbPassword>
2014-12-11
[]
INTERNAL
2.4 CONTROL
Format: CONTROL=<control>
Description: a string, with multiple values. Value range:
OPER: operator
SUB: subscriber
2.5 CONTROLREASON
Format: CONTROLREASON=<controlreason>
Description: a string, with a single value. Value range:
OPER: operator
SUB: subscriber
2.6 WPA
Format: WPA=<Wpa>
Description: a numerical string, with a single value.
2.7 CF
Format:
CF=<SsCode>-<BasicServ>-<SsVector>-<Ftn>-<NCP>-<NFP>-<CfTimer>-<COU>-<OFA
ID>-<FtnInHPLMNC>-<FtnInVPLMNC>-<FtnEnter>-<FtnInfo>-<Ftn_After_TIFCSI>-<V
CFB>-<VCFNRY>-<VCFNRC>-<INTERCFD>-<FtnOrigin>-<FtnVMS>
Description: multiple columns
Column 1: <SsCode> code of supplementary services of the forwarding type, a
string, with a single value. Value range:
CFU: call forwarding unconditional
CFB: call forwarding on busy
CFNRY: call forwarding on no reply
CFNRC: call forwarding on no reachable
CFD: default forwarding
CFBFTN: CFD replaces CFB forwarded-to number
CFNRYFTN: CFD replaces CFNRy forwarded-to number
CFNRCFTN: CFD replaces CFNRc forwarded-to number
Column 2: <BasicServ> basic service code, a string, with a single value. Value
range:
/*telecom service*/
2014-12-11
[]
INTERNAL
2014-12-11
[]
2.8 DEFOFAID
Format: DEFOFAID=<default_ofaid>
Description: a numerical string, with a single value, default OFA ID. Value range:
065534
2.10 CLIRES
Format: CLIRES=<ClirOp>
Description: CliRestrictionOption, a string, with a single value. Value range: PERM,
TEMPRES, TEMPALLOW
2.11 CLIPOC
2014-12-11
[]
INTERNAL
2.12 COLPOC
Format: COLPOC=<ColpOC>
Description: ColpOverrideCategory, a string, with a single value. Value: YES, NO
2.13 CNAPOC
Format: CNAPOC=<CnapOC>
Description: CNAPOverrideCategory, a string, with a single value. Value: YES, NO
2.14 LCS
Format: LCS=<lcstplid>
Description: LCS template number, a string, with a single value. Value range: 065534
2.15 UUS
Format: UUS=<uus>
Description: UUS signaling point value, a sting, with multiple values. Value range:
UUS1: send and receive UUI messages between call origination and call
termination
UUS2: send UUI messages when hearing the ring tone of the opposite party
UUS3: send and receive UUI messages after establishment of communication
2.16 CFSMS
Format:
CFSMS=<ssStatus>-<OFAID>-<FTN>-<ftnInHPLMNC>-<ftnInVPLMNC>-<ftnEnter
>-<ftnInfo>-<ftnVMS>
Description: multiple columns
Column 1: supplementary service status, a string, with a single value. Value range:
PROV, REG, ACT, QUC
Column 2: OFAID with a single value. Value range: 065534
Column 3: forwarding number, consisting of 328 digits, with a single value. The first
two digits indicate the number attribute, where 0x81 means an unknown number and
0x91 means an international number.
Column 4: with a single value, and indicating whether the forwarding number is in the
country where the HPLMN is located. Value: YES, NO
Column 5: with a single value, and indicating whether the forwarding number is in the
country where the VPLMN is located. Value: YES, NO
2014-12-11
[]
2.17 ACC_LENGTH
Format: ACC_LENGTH=<ACC_LENGTH>
Description: with a single value, ACC length. Value range:
DICR_0: acc length is 0
DICR_1: acc length is 1
DICR_2: acc length is 2
DICR_3: acc length is 3
DICR_4: acc length is 4
DICR_5: acc length is 5
DICR_6: acc length is 6
DICR_7: acc length is 7
DICR_8: acc length is 8
DICR_9: acc length is 9
DICR_10: acc length is 10
DICR_11: acc length is 11
DICR_12: acc length is 12
DICR_13: acc length is 13
DICR_14: acc length is 14
DICR_15: acc length is 15
DICR_16: acc length is 16
DICV: acc length is 127
2.18 CLRBSG
Format: CLRBSG=<SS_CODE>-<TS1X>-<TS2X>-<TS6X>-<BS2X>-<BS3X>
Description: multiple columns
Column 1: service code. Value range:
CLIP: calling line identification presentation
2014-12-11
[]
INTERNAL
2.19 MC
Format: MC=<NBRSB>-<NBRUSER>
Description: multiple columns
Column 1: Specifying the maximum number of MC (Multi Call) attempts that the HLR
allows, ranging from 2 to 7.
Column 2: Specifying the maximum number of MC attempts that the user determines,
ranging from 1 to 7.
2.20 UEREACH
Format: UEREACH=<MME_REG>-<SGSN_ REG>
Description: multiple columns
Column 1: Registered with MME. Value:
0: Not registered
1: Registered
Column 2: Registered with SGSN. Value:
0: Not registered
1: Registered
3 Multi-MSISDN
3.1 MMSISDN
Format:
MMSISDN=<Msisdn>-<Bsv>-<ITC>-<RCR>-<DC>-<S>-<RA>-<SAP>-<SA>-<NSB
>-<NDB>-<UR>-<IR>-<NICT>-<NICR>-<NPB>-<CE>-<MT>-<OMT>-<FNUR>-<L
A2>-<TM>-<DMODE>-<NIRR>-<ACC>-<NOTC>-<UIMI>-<WAIUR>-<ACCEx>-<
AI>
Description: multiple columns
2014-12-11
[]
2014-12-11
[]
INTERNAL
5: PIAFS
NONE (default value)
Column 8: SAP: Signaling Access Protocol: a numerical string, with a single value.
Value range:
1: I.440/450
2: X.21
3: X.28-dedicated PAD, individual NUI
4: X.28-dedicated PAD, universal NUI
5: X.28-non dedicated PAD
6: X.32
NONE (default value)
Column 9: SA: Synchronous/Asynchronous transfer: a numerical string, with a
single value. Value range:
0: Synchronous
1: Asynchronous
NONE (default value)
Column 10: NSB: Number of stop bits: a numerical string, with a single value.
Value range:
0: 1 bit
1: 2 bits
NONE (default value)
Column 11: NDB: Number of data bits: a numerical string, with a single value.
Value range:
0: 7 bits
1: 8 bits
NONE (default value)
Column 12: UR: User Rate: a numerical string, with a single value. Value range:
1: 300 bit/s
2: 1200 bit/s
3: 2400 bit/s
4: 4800 bit/s
5: 9600 bit/s
2014-12-11
[]
INTERNAL
2014-12-11
[]
INTERNAL
0: None
1: V.21
2: V.22
3: V.22 bis
4: V.23
5: V.26 ter
6: V.32
7: modem for undefined interface
8: Autobauding type 1
NONE (default value)
Column 19: OMT: Other Modem Type: a numerical string, with a single value.
Value:
0: No other Modem Type
2: V.34
NONE (default value)
Column 20: FNUR: Fixed network User Rate: a numerical string, with a single
value. Value:
0: Not applicable
1: 9600 bit/s
2: 14400 bit/s
3: 19200 bit/s
4: 28800 bit/s
5: 38400 bit/s
6: 48000 bit/s
7: 56000 bit/s
8: 64000 bit/s
9: 33600 bit/s
10:32000 bit/s
11:31200 bit/s
NONE (default value)
Column 21: LA2: a numerical string, with a single value. Value:
6: Recommendation X.25, link level
2014-12-11
[]
2014-12-11
[]
INTERNAL
7:8 TCH
Column 27: UIMI:
0: User initiated modification not allowed/required/applicable
1: User initiated modification up to 1 TCH/F allowed/may be requested
2: User initiated modification up to 2 TCH/F allowed/may be requested
3: User initiated modification up to 3 TCH/F allowed/may be requested
4: User initiated modification up to 4 TCH/F allowed/may be requested
NONE (default value)
Column 28: WAIUR: Wanted air interface user rate
0: air interface user rate not applicable
1:9.6 kbit/s
2:14.4kbit/s
3:19.2kbit/s
5:28.8kbit/s
6:38.4kbit/s
7:43.2kbit/s
8:57.6kbit/s
NONE (default value)
Column 29: ACCEx: Acceptable channel coding extended
0: None
1: TCH/F 43.2 acceptable
2: TCH/F 32.0 acceptable
3: TCH/F 43.2&32.0 acceptable
4: TCH/F 28.8 acceptable
5: TCH/F 43.2&28.8 acceptable
6: TCH/F 43.2&32.0 acceptable
7: TCH/F 43.2&32.0&28.8 acceptable
NONE (default value)
Column 30: AI: Asymmetry Indication
0, 3: channel coding symmetry preferred
1: downlink biased channel coding asymmetry is preferred
2: uplink biased channel coding asymmetry is preferred
2014-12-11
[]
INTERNAL
3.2 ALS
Format: ALS=<ALS number>
Description: a string consisting of 16 digits, in a format similar to TBCD format.
4 CUG Data
4.1 CUG_SUB
FormatCUG_SUB=<InterLock>-<CUGIndex>-<IntraCUGOptions>-<BSGList>;
Description: CUG subscription data, with multiple columns. Value range
Column 1: InterLock: a numerical string consisting of eight digits, with a single
value. Value range: 0000000099999999
Column 2: cugIndex: a numerical string, with a single value. Value range: 032767
Column 3: IntraCUGOptions: a string, with a single value. Value range:
NOBAR: no CUG barring
ICBAR: barring of CUG incoming calls
OCBAR: barring of CUG outgoing calls
Default value: NOBAR
Column 4: BSGList: basic service group list, a string, with multiple values. Value
range:
ALL: all basic services
/*telecom service*/
TS10: allSpeechTransmissionServices, TS11
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
4.2 CUG_FEA
Format: CUG_FEA=<BSG>-<CUGIndex>-<InterCUGRestrictions>;
Description: CUG feature data, with multiple columns. Value range:
Column 1: basic service group, with a single value. Value range:
ALL: all basic services
/*telecom service*/
2014-12-11
[]
INTERNAL
5 CAMEL Data
5.1 NTCSI
Format:
TCSI=<DP>-<SCF_ADD>-<SERVICE_KEY>-<DEF_CALL>-<CAMEL_PHASE>-<VLR
_NOTSUPPHASE1>-<VLR_SUPLPORNOTSUPPHASE2><VLR_SUPLPORNOTSUPPHASE3>-<VLR_SUPLPORNOTSUPPHASE4>-<GMSC
_NOTSUPPHASE1>-<GMSC_SUPLPORNOTSUPPHASE2>-<GMSC_SUPLPORNOTSU
PPHASE3>-<GMSC_SUPLPORNOTSUPPHASE4>-<PSICONF>-<AVAILABLE_PLMN>
Description: with a single value, multiple columns
Column 1: value. Value range:
COLLECTINFO: collect information, DP2 (OCSI)
ROUTESELFAIL: route selection fails, DP4 (OCSI)
TAA: Terminating_Attempt_Authorized, DP12. DP12 trigger list contains up
to 5 kinds of telecommunications computer service interface (TCSI) code.
TBUSY: DP13 (TCSI)
TNOANSWER: DP14 (TCSI)
Column 2: SCPaddress index, E.164 Format address
Column 3: service key, 02147483647
Column 4: default calls processing. Value range:
ContinueCall: continue the call
ReleaseCall: release the call
2014-12-11
[]
INTERNAL
2014-12-11
[]
INTERNAL
5.2 OCSI
Format: OCSI=<OCSI>
Description: a numerical string, with a single value. Value range: 099999, OCSI data
template for subscription
5.3 TCSI
Format: TCSI=<TCSI>
Description: a numerical string, with a single value. Value range: 099999, TCSI data
template for subscription
5.4 GPRSCSI
Format: GPRSCSI=<gprscsi>
Description: gprscsi template number, a string, with a single value. Value range:
065534
5.5 SSCSI
Format: SSCSI=<sscsi>
Description: sscsi template number, a string, with a single value. Value range: 065534
5.6 VTCSI
2014-12-11
[]
INTERNAL
Description: vtcsi template number, a string, with a single value. Value range: 065534
5.7 DCSI
Format: DCSI=<dcsi id>
Description: dcsi template number, a string, with a single value. Value range: 065534
5.8 SMSCSI
Format: SMSCSI=<smscsi id>
Description: smstcsi template number, a string, with a single value. Value range:
099999
5.9 MTSMSCSI
Format: MTSMSCSI=<mtsmscsi id>
Description: mtsmstcsi template number, a string, with a single value. Value range:
099999
5.10 UCSI
Format: UCSI=<ucsi id>
Description: ucsi template number, a string, with a single value. Value range: 065534
5.11 MCSI
Format: MCSI=<ucsi id>
Description: mcsi template number, a string, with a single value. Value range: 065534
5.12 TIFCSI
Format: TIFCSI=<tifcsi>
Description: whether to subscribe to TIFCSI and with a single value. Value range:
YES/NO
5.13 LUCSI
Format: LUCSI=<ucsi id>
Description: LU-CSI template number, a numerical string, with a single value. Value
range: 065534
5.14 IMCSI
Format: IMCSI=<o-IM-CSI>-<vi-IM-CSI>
Description: multiple columns Value range:
2014-12-11
[]
5.15 SHORTNUM
Format: SHORTNUM=<Short number id>
Description: long numbers and short numbers template, a numerical string, with a single
value. Value range: 065534
5.16 SUBTPL_ID
Format: SUBTPL_ID=<SUBTPL_ID>
Description: 065534 subscriber template ID, a numerical string, with a single value.
Value range:
5.17 OPTGPRS_TPL_ID
Format: OPTGPRS_TPL_ID=<OPTGPRS_TPL_ID>
Description: OPTGPRS template ID, a numerical string, with a single value. Value
range: 065534
6 GPRS Data
6.1 PDPCID
Format: PDPCID=<PdpContextID>
Description: a numerical string, with a single value. Value range: 0254. The field is
consistent with the hybrid subscription template number set by the current HLR. For a
subscriber, this field cannot appear concurrently with the PDPCONTEXT.
6.2 PDPCONTEXT
Format:
PDPCONTEXT=<PdpId>-<Organize>-<PdpAddrType>-<AddrOption>-<PdpAddress>
-<DelayClass>-<Reliability>-<PeakThroughput>-<MeanThroughput>-<PrecedenceClas
s>-<VplmnAddrAllowed>-<APN>-<AR>-<TC>-<DO>-<ErrSdu>-<MSS>-<MaxUp><MaxDown>-<RBER>-<SduER>-<TD>-<TP>-<GMaxUp>-<GMaxDown>-<PDPCH
>-<MAXEXTBRDWL>-<MAXEXTGBRDWL>-<MAXEXTBRUPL>-<MAXEXTGB
RUPL>-<PDP_ADDIPV4>-<STD_CHARGE>
Description: multiple columns. For a subscriber, this field cannot appear concurrently
with PDPCID.
2014-12-11
[]
2014-12-11
[]
2014-12-11
[]
INTERNAL
2014-12-11
[]
INTERNAL
2014-12-11
[]
INTERNAL
2014-12-11
[]
INTERNAL
115:10ms150ms, in 10 ms increments
1631:200ms950ms, in 50 ms increments
3262:1000ms4100ms, in 100 ms increments
NONE
Default value: NONE
Column 23: TP: Traffic handling priority: a numerical string, with a single value.
Value range:
0: Reserved
1: Priority level 1
2: Priority level 2
3: Priority level 3
NONE
Default value: NONE
Column 24: GMaxUp: Guaranteed bit rate for uplink: a numerical string, with a
single value. Value range: 0254
0: Reserved
163: n = rate
64127: n = (rate64)/8+64, (rate: 64568)
128254: n = (rate576)/64+128, (rate: 5768640)
NONE
Default value: NONE
Column 25: GMaxDown: Guaranteed bit rate for downlink: a numerical string,
with a single value. Value range: 0254
0: Reserved
163: n=rate
64127: n = (rate64)/8+64, (rate: 64568)
128254: n = (rate576)/64+128, (rate: 5768640)
NONE
Default value: NONE
Column 26: <PDPCH>: PDP context charging characteristics: a numerical string,
with a single value. Value range:
0: None charging characteristics
2014-12-11
[]
INTERNAL
2: Flat rate
4: Prepaid service
8: Normal billing
3:3
5:5
6:6
7:7
9:9
...
253:253
254:254
NONE
Default value: NONE, indicating Normal billing
Column 27: <MAXEXTBRDWL>: Maximum extended bit rate for downlink: a
numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
NOExtend
Default value: NOExtend
Column 28: <MAXEXTGBRDWL>: Maximum extended guaranteed bit rate for
downlink: a numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
NOExtend
Default value: NOExtend
Column 29: <MAXEXTBRUPL>: Maximum extended bit rate for uplink: a
numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
2014-12-11
[]
INTERNAL
6.3 CHARGE_GLOBAL
Format: CHARGE_GLOBAL=<CHARGE_GLOBAL>
Description: a string, with a single value. Value range:
NONE: no charging feature
HOT: hot charging, realtime charging
FLAT: flat charging
PREPAID: prepaid
NORMAL: ordinary charging
3:3
5:5
6:6
7:7
9:9
...
151:151
152:152
153:153
...
253:253
254:254
2014-12-11
[]
INTERNAL
6.4 STD_CHARGE_GLOBAL
Format: STD_CHARGE_GLOBAL=<STD_CHARGE_GLOBAL>
Description: a string, with a single value, 4 hexadecimal digits. Value range:
["0000""FFFF"]
6.5 OPTGPRS
Format:
OPTGPRS=<CONTEXT_ID>-<APNTPL_ID>-<QOSTPL_ID>-<Organize>-<Ad
dressType>-<PDP_ADD>-<VPLMN_ALLOWED>-<Charge_Detail>-<PDP_AD
DIPV4>-<EPS_QOSTPL_ID>-<DEFAULT_FLAG>-<WILDCARD_FLAG>-<APN_
TYPE>-<STD_CHARGE>
Description: multiple columns Value range:
Column 1: context id. Value range: 150
Column 2: apntpl id. Value range: 065534
Column 3: qostpl id. Value range: 065534
Column 4: the part one of Address Type. Value: 240, 241
240: ETSI address
241: ITEF address
Column 5: the part two of Address Type. Value range: 33, 87, 0, 1, 2, 141
When the value of Organize is 240, the values 00, 01, and 02 represent the
following meanings:
00: dynamic x.121 address
01: ppp dynamic address
02: OSP IHOSS address
When the value of Organize is 241, the values 33, 87, and141 represent the
following meanings:
33: dynamic IPV4 address
87: dynamic IPV6 address
141: dynamic IPV4IPV6 address
3: dynamic IPV4_OR_IPV6 address
Column 6: PDP Address. Value: ip address or x.25 address format
Column 7: Whether to allow accessing the APN of the VPLMN. Value: 1, 0
Column 8: charging characteristics. Value range:
0: None charging characteristics
1: Hot billing
2014-12-11
[]
INTERNAL
4: Prepaid service
8: Normal billing
3:3
5:5
6:6
7:7
9:9
253:253
254:254
Column 9: <PDP_ADDIPV4>: PDP address of IPV4, a string, with a single
value, consisting of 8 characters
Column 10: EPS_QOStempalte number. Value range: 065534
Column 11: default APN. Value: YES, NO
0: YES
1: NO
Column 12: *APN. Value: YES, NO
0: YES
1: NO
Column 13: APN type, with a single value. Value range: PS_APN, EPS_APN,
BOTH:
PS_APN: 1
EPS_APN: 2
BOTH: 3
Column 14: standard charging characteristics, characters, with a single value,
4 hexadecimal digits. Value range: ["0000""FFFF"]
6.6 OPTGPRSTPLID
Format: OPTGPRSTPLID=<OptGprstplId>
Description: a numerical string, with a single value. Value range: 065534
7 FM Data
2014-12-11
[]
INTERNAL
7.1 FMSUBTYPE
Format: FMSUBTYPE=<FMSUBTYPE>
Description: a string, with a single value. The parameter indicates the role of the user in
the FM service. Value range:
INITSUB: initial user
SUPVSUB: manager user
REMOTESUB: GSM virtual remote user
7.2 INITSUB
Format: INITSUB=<INITSUB>
Description: initial subscriber, a string, with a single value. Value range: 01
7.3 SUPVSUB
Format: SUPVSUB=<SUPVSUB>
Description: supervise subscriber, a string, with a single value. Value range: 01
7.4 FMSUBCOR
Format:
FMSUBCOR=<INITCOR1>-<INITCOR2>-<INITCOR3>-<INITCOR4>-<INITC
OR5>-<SUPVCOR1>-<SUPVCOR2>-<SUPVCOR3>-<SUPVCOR4>-<SUPVC
OR5>
Description: FM subscriber corset, multiple columns. The parameter exists only if
FMSUBTYPE is INITSUB or SUPVSUB. Each column has the same range: 0254.
Default value: 255.
7.5 AUTHREMOTE
Format: AUTHREMOTE=<RMNUM>-<AUTHTYPE>
Description: FM authorized remote number, multiple columns. Value range:
Column 1: authorized remote number, a string with 15 digits, in a format similar to
TBCD format.
Column 2: authorized type, value range:
INITSUB: initiating subscriber
SUPVSUB: supervisor
7.6 REGREMOTE
Format:
REGREMOTE=<RMNUM>-<FUNCDESC>-<RMTY>-<FFNADD>-<RMCOR1>-<RMC
OR2>-<RMCOR3>-<RMCOR4>-<RMCOR5>
2014-12-11
[]
8 EIN Data
8.1 EIN
Format: EIN=<Type>-<SK>Description: multiple columns
Column 1: service type. Value range:
EOCSI: EOCSI service
ETCSI: ETCSI service
BEOCSI: BEOCSI service
EOICK: EOICK service
Column 2: service key, a numerical string, with a single value. Value range:
0999
9 Multi-IMSI Data
9.1 MIMSI
Format:
MIMSI=<IMSI>-<IMSI_TYPE>-<IMSI_INDEX>-<CALL_INDEX>-<MIMSI_SMS>
2014-12-11
[]
INTERNAL
Description: Multi-IMSI data is exported by IMSI and each IMSI data occupies only
one line. Value range:
Column 1: IMSI number, with a numerical string consisting of 16 digits, in a
format similar to TBCD format
Column 2: user type. Value range:
MULTIIMSI: multi IMSI user
ORDERLYRING: OrderlyRing user
SIMULTANEOUSRING: SimultaneousRing user
ONELIVE: OneLive user
Column 3: subscription serial number. Value range: 19
Column 4: connection sequence number. Value range: 19
Column 5: IMSI used to receive short messages. Value range: 19
Column 6: IMSI used for the VOBB service. Value range: 09
Column 7: Index of the IMSI contained in the latest successful PSI response
9.2 VOICE
Format: VOICE=<VOICENUMBER>-<VOICE_INDEX>
Description: multiple columns
Column 1: voice mailbox number, a numerical string consisting of 115 digits
Column 2: voice mailbox index. Value range: 12 digits
10 LINKSIM Data
10.1 SIMSI
Format: SIMSI=<Imsi number>
Description: a numerical string consisting of 16 digits, in a format similar to TBCD
format. Value: IMSI number of the bound user
11 OKSC Data
11.1 OKSC
Format: OKSC=<OKSC>
Description: a numerical string, with a single value. Value range: 0-65534, OKSC data
template for subscription.
2014-12-11
[]
INTERNAL
2014-12-11
[]
2014-12-11
[]
INTERNAL
14.2 USERCATEGORY
Format: USERCATEGORY=<USERCATEGORY>
Description: Specifies whether a subscriber is an M2M or normal subscriber. Value:
NORMAL, M2M
2014-12-11
[]
INTERNAL
14.3 IMEIBIND
Format: IMEIBIND=<ImeiId>-<Imei>
Description: multiple columns
Column 1: IMEIID, for internal use only, which is set to 1
Column 2: IMEI that has been bound with an IMSI, which contains a string of 1 to 14
digits, in a format similar to TBCD
Note: Multiple records are made.
15.2 NON3GPP
Format:
NON3GPP=<None3GPPSupport>-<WlanNotAllowed>-<Cdma2000NotAllowed>-<Hr
pdNotAllowed>-<UmbNotAllowed>-<EhrpdNotAllowed>-<MIP6FEAVEC>-<Session
Timeout>
Description: multiple columns
Column 1: whether to support the Non-3GPP attribute subscription. Value: YES,
NO
Column 2: restriction on Non-3GPP wireless access. Wireless Local Area Network
is not allowed. Value: YES, NO
Column 3: restriction on Non-3GPP wireless access. CDMA2000_1X access
network is not allowed. Value: YES, NO
Column 4: restriction on Non-3GPP wireless access. High-speed data packet is not
allowed. Value: YES, NO
Column 5: restriction on Non-3GPP wireless access. Super mobile broadband is not
allowed. Value: YES, NO
Column 6: restriction on Non-3GPP wireless access. Extended high-speed data
packet is not allowed. Value: YES, NO
Column 7: the capability of Non-3GPP Gate Way (GW) for supporting mobile IP.
Value:
2014-12-11
[]
2014-12-11
[]
INTERNAL
2014-12-11
[]
INTERNAL
19.2 ARD_EXT
Format: ARD_EXT=<GAN>-<IHSPAE>-<EUTRAN>-<N3GPP>
Description: supplementary restriction on user-network access, multiple columns, with a
single value. Value:
Column 1: GANALLOWED, GANNOTALLOWED
GANALLOWED: allow subscribers to access GAN
GANNOTALLOWED: not allow subscribers to access GAN
Column 2: IHSPAEALLOWED, IHSPAENOTALLOWED
IHSPAEALLOWED: allow subscribers to access IHSPAE
IHSPAENOTALLOWED: not allow subscribers to access IHSPAE
Column 3: EUTRANALLOWED, EUTRANNOTALLOWED
EUTRANALLOWED: allow subscribers to access EUTRAN
EUTRANNOTALLOWED: not allow subscribers to access EUTRAN
Column 4: N3GPPALLOWED, N3GPPNOTALLOWED
N3GPPALLOWED: allow subscribers to access Non-3GPP
N3GPPNOTALLOWED: not allow subscribers to access Non-3GPP
19.3 CAPR
Format: CARP=<CARPStatus>
2014-12-11
[]
19.4 MAX_PRIORITY
Format: MAX_PRIORITY=<max priority>
Description: the subscribed highest eMLPP priority. Value range: 06
19.5 DEF_PRIORITY
Format: DEF_PRIORITY=<def priority>
Description: the subscribed default eMLPP priority. Value range: 06, no greater than
the highest priority
19.6 EMLPP_COU
Format: EMLPP_COU=<emlpp cou>
Description: subscribed eMLPP control attribute. Value:
OPERATOR: Default eMLPP priority is controlled by operators.
SUBSCRIBER: Default eMLPP priority is controlled by operators or
subscribers.
19.7 VBSR
Format: VBSR=<vbsr>
Description: a single value. The Voice Broadcast Service indicates whether subscribers
can originate VBS group calls when roaming to another network. Value:
PROV: Subscribers can originate VBS group calls when roaming to another
network.
Default: Subscribers cannot originate VBS group calls when roaming to another
network.
19.8 VGCSR
Format: VGCSR=<vgcsr>
Description: a single value. The Voice Group Call Service indicates whether
subscribers can originate VGCS group calls when roaming to another network. Value:
2014-12-11
[]
19.9 VBS_GIDLIST
Format: VBS_GIDLIST=<group_id1>-<capinitvbs>&<group_id2>-<capinitvbs>
Description: VBS service information, multiple columns, with multiple values and a
maximum of 50 <group_id>-<capinitvbs> combinations
Note: The definition does not conform to the standard Huawei format and is
reserved for the consideration of compatibility.
19.10 VGCS_GIDLIST
Format: VGCS_GIDLIST=<group_id1>&<group_id2>...
Description: VGCS service information, in a single column, with multiple values and a
maximum of 50 <group_id>
Note: The definition does not conform to the standard Huawei format and is
reserved for the consideration of compatibility.
19.11 VBS
Format: VBS=<vbs>
Description: VBS service subscription information, with a single value
PROV: subscribing to the VBS service
19.12 VGCS
Format: VGCS=<vgcs>
Description: VGCS service subscription information, with a single value
PROV: subscribing to the VGCS service
19.13 ECATEGORY
Format: ECATEGORY=<ecategory>-<ecatoption>
2014-12-11
[]
19.14 RRR_TPL_ID
Format: RRR_TPL_ID=<zctid>
Description: the subscribed Zone Code template ID, which contains a string of digits,
with a single value. Value range: 09999
Correlation: RRR_TPL_ID is related to SUBRES and becomes effective only when
SUBRES is set to RRTEMPLATE.
19.15 NIR
Format: NIR=<nirIndex>
Description: the subscribed NIR index, which contains a string of digits, with a single
value. Value range: 0999
19.16 STANDBY_IMSI_EXT
Format: STANDBY_IMSI_EXT=<IMSI>-<OLD_IMSI>-<SID>
Description: multiple columns
Column 1: backup card of the automatic IMSI change service. Value range: a string of
5 to 16 digits, in a format similar to TBCD
Column 2: original card of the automatic IMSI change service. Value range: a string
of 5 to 16 digits, in a format similar to TBCD
Column 3: a single value, which contains a hexadecimal string of
16 digits
19.17 FRAUDTPL_ID
Format: FRAUDTPL_ID=<FRAUDTPL_ID>
2014-12-11
[]
19.18 CA
Format: CA=<ChargingArea1>-<ChargingArea2>-<ChargingArea3>
Description: charging area based on the regional charging function, multiple columns
Column 1: charging area 1. Value range: 19999
Column 2: charging area 2. Value range: 19999
Column 3: charging area 3. Value range: 19999
Format:
IMSI KI K4_INDEX ALGORITHM CARD_TYPE OPC
OP_INDEX USED_FLAG SID AMF_INDEX MIMSI_FLAG
.
Every authentication data occupies a line and contains IMSI, KI, K4, etc.
Values are separated with a space.
2.
20.1.2 Column 2
Description: KI, which contains a string of 1 to 32 digits
20.1.3 Column 3
Description: K4 serial number used for encrypting the KI. Value range: 1254
20.1.4 Column 4
Description: Authentication algorithm, a string, with a single value. Value:
1: COMP128-1
2: COMP128-2
3: COMP128-3
2014-12-11
[]
INTERNAL
5: XOR
6: CAVE38
7: CUSTOM_2
8: CUSTOM_3
127: CUSTOM_1
128: MILENAGE
129: MILENAGE_2
20.1.5 Column 5
Description: type of the user card
0: SIM card
1: USIM card
20.1.6 Column 6
Description: OPC, which contains a string of 32 digits in the format of the
positive BCD code
20.1.7 Column 7
Description: OP index. Value range: 116777215
20.1.8 Column 8
Description: USED_FLAG, a single value. Value range: 01
0: The subscriber is not defined.
1: The subscriber is defined.
20.1.9 Column 9
Description: SID, a single value, with a string of 16 hexadecimal digits, in the
format of the BCD code
20.1.10
Column 10
Description: AMF_INDEX. Value range: 065535
20.1.11
Column 11
Description: Authentication data of the primary number in the multi-IMSI
service and multi-Profile service
0: No
1: Yes
20.1.12
Column 12
2014-12-11
[]
INTERNAL
2014-12-11