Académique Documents
Professionnel Documents
Culture Documents
SafetySystem.1
SafetySystem.2
SafetySystem.3
SafetySystem.4
SafetySystem.5
SafetySystem.6
SafetySystem.7
ControlSystem.1
Requirements
Properties
Requested Value
N/A
Compliance
R,I
Compliance
R,I
N/A
N/A
N/A
N/A
Compliance
Compliance
Compliance
Compliance
R,T
R
R,T
R,I
N/A
Compliance
R,I
Compliance
R, I
N/A
Compliance
R, T
N/A
minimum 3 modes of operation,
e.g. Alignment, Maintenance, Running mode
N/A
remote control in experimental areas,
remote control in the control room of the HPLS
Compliance
R, T
Compliance
R, T
Compliance
R, T
Compliance
R, T
Compliance
R,T
N/A
Compliance
R,T
N/A
Compliance
R,T
N/A
Compliance
R,T
Compliance
R, T
Compliance
R,T
Compliance
R, T
Compliance
R,T
Compliance
R,T
TANGO interface
Compliance
R,T
N/A
Compliance
R,T
N/A
Compliance
R, T
Compliance
Compliance
Compliance
R,I
R,I
R,I
N/A
Compliance
R,T
The supplier shall provide a certificate of conformance for the safety system
The supplier shall provide operation manuals and mainteinance manuals with detailed
description of the devices used in the system
All drivers, programming applications and souce codes shall be made available to the
Purchaser.
The supplier shall provide detailed documentation for all software programs.
N/A
Compliance
R,I
N/A
Compliance
R,I
N/A
Compliance
R,I
N/A
Compliance
R,I
The Safety system shall be designed in acordance with the EU Safety regulations and
shall use hardware compliant with the EU Safety regulations
The Safety system shall have I/O hardware digital signals to interlock the operation of
the LBTS with external signals from other systems like HPLS, ELI General Safety system,
etc.
The Safety system shall have password access to the Safety system application
The LBTS Safety system shall protect the LBTS from accidental reconfiguration.
The LBTS Safety system shall output the status of the system
The LBTS Safety system shall be interfaced with the LBTS Control System
The LBTS Safety system shall use redundant safety limit switches placed on the mirror
motion stages.
The Control System application shall be build using open source software
ControlSystem.3
The computer system that stores the database shall have redundant hardware so that
a particular computer failure does not affect the LBTS operation.
The Control System database shall be redundant.
ControlSystem.4
ControlSystem.5
The Control System of the LBTS shall have multiple level access.
ControlSystem.6
The Control System of the LBTS shall have remote control of the parameters.
ControlSystem.2
The LBTS Control System shall provide independent monitoring and control of the
position of each mirror in the system.
The LBTS Control System shall provide automatic routing of the mirrors in the 7
ControlSystem.8
predefined configurations correlated with the gate valves position in any of the 7
predefined output configurations (according to Annex E - Mirrors position matrix).
The control System of LBTS shall control and monitor the vacuum level and gate valves
ControlSystem.9
status and positions.
The Control System of LBTS shall monitor and control the alignment of the entire beam
ControlSystem.10
transport
ControlSystem.7
ControlSystem.11
The Control System of LBTS shall provide machine protection features for the LBTS
ControlSystem.12
ControlSystem.13
The LBTS control system shall provide visual feedback through triggered cameras
facing the mirrors reflective surface
ControlSystem.14
ControlSystem.15
ControlSystem.16
ControlSystem.17
ControlSystem.18
Additional.1
Additional.2
Additional.3
Additional.4
Commisioning.1
Commisioning.2
Commisioning.3
Commisioning.4
Verification method
R= Revision ,
I= Inspection,
T= Test
The Control System shall provide alarms, logging and history of the configurations,
cameras image storage, functioning time of the system/pumps/etc for a predefined
period
The entire Control System and Safety System of LBTS shall be syncronized with a
dedicated NTP server with GPS unit to provide a unitary time of the system
The vacuum control system shall be developed using dedicated hardware and
interfaced with the Control System software application
The vacuum control system shall provide automatic venting procedures for the LBTS
vacuum system
The LBTS control system shall provide automatic alignment monitoring of the LBTS
during HPLS operation