Garlock Sealing Technologies

KLOZURE Oil Seals & Bearing Isolators

Seal in your profits

M A S T E R C ATA L O G

The Rotating Equipment Authority

TM

Foreword
We believe in the principle that you cant be all things to all
people. Garlock has chosen to be the leading manufacturer of
radial lip seals and bearing protection devices servicing the
industrial marketplace. We believe the best method to get our
products to the industrial customer is through strategic
alliances with our distribution partners. Our commitment to our
distributors, and the ultimate user, is to constantly introduce

new and innovative products at higher levels of quality with an

emphasis on compressed lead times - products that will last
longer and reduce overall maintenance costs. All of our employees have a can do attitude and take pride in helping customers. You have a problem? We have a solution. All we ask is
the chance to prove ourselves; you wont be disappointed!

Garlock Warranty
All merchandise ordered shall be sold subject to SELLERS
standard warranty, viz: SELLER warrants that any product of
its manufacture, which upon examination is found by a SELLERS representative to be defective either in workmanship or
material whereby it is not suitable under proper usage and
service for the purpose for which designed, will be, at SELLERS option, repaired or replaced free of charge including
transportation charges but not cost of installation providing

that SELLER receives written claim specifying the defect within one year after SELLER ships the product. ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED INCLUDING ANY
WARRANTY OF MERCHANTABILITY ARE HEREBY DISCLAIMED. The foregoing expresses all of SELLERS obligations and liabilities with respect to the quality of items furnished by it and it shall under no circumstances be liable for
consequential damages.

General Seal Selection

Single Lip Seals are ideal for the majority of sealing applications. These general purpose seals are available in a wide
range of stock sizes.
Split KLOZURE Oil Seals and Bearing Isolators are
designed for easy installation on large shafts without costly
teardown for seal replacement.
Dual Lip Oil Seals are recommended for those applications
involving the separation of two fluids, the exclusion of abrasive
or foreign materials, and difficult or unusual sealing problems.
Bonded Oil Seals are used in applications where low cost
and minimum performance are the primary considerations.
Special Purpose Oil Seals are recommended for high speed
applications, reciprocating service, spherical bearings, tapered
roller bearings and similar applications.
ISO-GARD and EQUALIZER Bearing Isolator Seals provide superior bearing protection where outstanding contaminant exclusion and ultra long life are desired.

MICRO-TEC Bearing Protector Seals combine a unique

design and microcellular technology, for rotating or stationary
shaft sealing and bearing protection in highly contaminated
environments.
The Garlock line of KLOZURE Oil Seals and Bearing
Isolators is asbestos-free.
We are pleased to present this Garlock KLOZURE Oil Seals
and Bearing Isolators catalog. It contains the most concise,
current sealing information to make seal selection easy and
accurate, providing reference to applications, shaft speeds,
operating temperatures and shaft size. This information permits you to select a Garlock KLOZURE Oil Seal for long-lasting, trouble-free service.
For online selection, visit the Garlock network at
www.garlock.net
For non-standard applications, contact Garlock to complete a
detailed application data sheet.

How to use the KLOZURE Oil Seal Master Catalog

Our family of Garlock KLOZURE Oil Seal and Bearing
Isolators catalogs is designed to make ordering Garlock
KLOZURE Oil Seals as easy as possible and to give you the
most complete information on oil seals you will find anywhere.
This catalog is organized by the type of seal you need with
sections for Single Lip, Dual Lip and Special Purpose seals.
Pertinent information on each model is summarized in these
sections so that you may choose an oil seal directly from the
information shown here.

The general engineering secion is designed to offer guidance

concerning shaft finish, misalignment, pressure data, tolerance charts and technical specifications... all the information
that will help you seal effectively. The selection chart for seal
elements lets you compare temperature, fluid compatibility,
relative cost, service life... everything that you need to choose
the right seal for your application.
Installation instructions with diagrams have also been included, along with a troubleshooting tips section, to help you solve
possible problems.

Index
Page
Single Lip KLOZURE Oil Seals
Spring Loaded: Models 26, 53, 59, 63, 64, 66, 67, 76, 87, 88, 92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
No Spring: Models 58, 71, 91 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Dual Lip KLOZURE Oil Seals
Dual Opposed (both lips with spring): Models 53R2, 63R2 . . . . . . . . . . . .
Dual Opposed (one lip with spring): Models 3, 26R1, 53R1, 53F1, 57, 94
Dual Tandem (front lip, no spring): Models 53TB, 63TB . . . . . . . . . . . . . .
Dual Tandem (both lips with spring): Models 53T2, 63T2 . . . . . . . . . . . . .

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.
.
.
.

.5
.6
.7
.7

Single Lip Split KLOZURE Oil Seals

Models 21, 23, 24, 25, 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
External Lip Seals
Models 111, 113, 123 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Special Purpose KLOZURE Oil Seals
Model 54: Seals for Spherical Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11
Model 61, 62: PTFE Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Model 142: Steel Mill Water Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11
Model 145A-1, 145A-2: Face-Type Excluder Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11
MICRO-TEC Bearing Protector Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
EQUALIZER Bearing Protector Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
ISOGARD Bearing Isolator Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Engineering and Installation Information
General Engineering Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
General Engineering Data Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 17
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Selection Charts for Seal Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Assembled and Bonded Seals
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 - 22
Split KLOZURE Oil Seals, Models 21, 23, 24, 25, 26
Application Information and Size Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Conversion Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Typical KLOZURE Oil Seal Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Model number to Part number Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Oil Seals and Bearing Isolators by Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-1 M-133
Oil Seals and Bearing Isolators by Shaft Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-1 S-129
Oil Seals and Bearing Isolators by Metric Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Metric 1 Metric 16
Model 79 Rod Scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R-1 R-4
Relationship Between RPM, FPM and Shaft Diameters . . . . . . . . . . . . . . . . . . . . . . . . .Inside Back Cover
How to Order

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Single Lip - Spring Loaded

General Purpose Lubricant Retention Seals

Features
MODEL 26

General purpose,
non-metallic seal
Molded one-piece
construction

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

3/4 thru 60
(19.4 thru
1524)

5000 (25.4)

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.015 @ 1000
(0.38 @ 5.1)

Spring

O.D.
Construction

Stainless
Steel
Finger

Rubber with
reinforced
heel

Stainless
Steel
Finger

Steel Case**

0.010 @ 2000
(0.25 @ 10.2)
0.008 @ 5000
(0.20 @ 25.4)

MODEL 53

Heavy duty case

General purpose
standard seal
Assembled design

3 thru 90
(76.2 thru
2286)

3000 (15.2)

0.015 @ 1000
(0.38 @ 5.1)
0.10 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

MODEL 59

Moderate to
severe operating
conditions
Heavy duty
metal case
Assembled design

6 thru 90
(152.4 thru
2286)

5000 (25.4)

0.093 Max.
(2.36)

Stainless
Steel
Finger

Steel Case**

MODEL 63

Equivalent to
Model 53
Assembled design

1/4 thru 3
(6.4 thru
76.2)

3000 (15.2)

0.015 @ 1000
(0.38 @ 5.1)

Stainless
Steel
Finger

Steel Case**

0.010 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

MODEL 64

FPM = feet per minute

Severe service seal 8 thru 90

in steel mills,
(203.2 thru
heavy equipment
2286)
industry
Assembled design

0.125 @ 5000
(3.18 @ 25.4)

Combination
Carbon Steel*
Garter and
0.093 @ 7000 Stainless
(2.36 @ 35.6) Steel Finger

Steel Outer
Case**
with Steel
Inner Case

MPS = meters per second

Standard sealing element is nitrile.

MILL-RIGHT, silicone and fluoroelastomer available.
*Stainless steel available on special order.
**Plated cases available on special order. Special tooling may
be required for stainless steel cases.
Alummum and brass cases thru 19.999 inches (507.97 mm)
O.D. on special order.

Plated steel available on special order.

2

7000 (35.6)

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not be
undertaken without independent study and evaluation ror suitability. For specific application recommendations
consult Garlock. Failure to select the proper sealing products could result in property damage and/or
serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports
and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to change
without notice.

Single Lip - Spring Loaded

General Purpose Lubricant Retention Seals

Features
MODEL 66

Equivalent to
Model 76 with
heavy duty case
Assembled design

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

3/8 thru 7-7/8

(9.5 thru
200)

3000 (15. 2)

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.015 @ 1000
(0.38 @ 5.1)

Spring

O.D.
Construction

Carbon
Steel*
Garter

Steel Case**

Carbon
Steel*
Garter

Steel Case**

Carbon
Steel*
Garter

Steel Case

Carbon
Steel
Garter
Encapsulated

Rubber
Covered
Steel
Ring

Carbon
Steel
Garter
Encapsulated

Rubber
Covered
Steel
Ring

Carbon
Steel*
Garter

Rubber
Covered
Steel
Case

0.010 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

MODEL 67

MODEL 76

General purpose
Strong sealing
element
Assembled design

1/2 thru 3-1/4

(12.7 thru
82.5)

General purpose
Fits minimum
space
Bonded design

1/4 thru 8
(6.4 thru
203.2)
limited
sizes
available

1000 (5.1)

0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

3000 (15.2)

0.015 @ 1000
(0.38 @ 5.1)
0.010 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

MODEL 87

MODEL 88

MODEL 92

Moderately severe
service seal with
rubber O.D. to
ease installation
Molded design
Reverse bevel lip
eliminates roll-over

6 thru 48
(152.4 thru
1219.2)

Moderately severe
service seal with
rubber O.D. to
ease installation
Molded design
Reverse bevel lip
eliminates roll-over

6 thru 48
(152.4 thru
1219.2)

Equivalent to
Model 76 with
rubber O.D. for
non-ferrous
housings
Bonded design

1/4 thru 12-1/2

(6.4 thru
317.5)
limited
sizes
available

5000 (25.4)

0.100 @ 2500
(2.54 @ 12.7)
0.050 @ 5000
(1.27 @ 25.4)

5000 (25.4)

0.050 @ 2500
(1.27 @ 12.7)
0.025 @ 5000
(0.64 @ 25.4)

3000 (15.2)

0.015 @ 1000
(0.38 @ 5.1)
0.010 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

Single Lip - No Spring - Retains Heavy Lubricants,

Excludes Contaminants with Reverse Installation

Features

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

Misalignment
& Runout
In. @ FPM
(MM @ MPS)

Spring

O.D.
Construction

MODEL 58

THERMO-CERAMTM
sealing element
withstands high
temperatures,
abrasive applictions
For reciprocating
and rotating
equipment
Ideal for steel
industry

2 thru 12
(50.8 thru
305)

500 (2.5)

0.015 @ 500
(0.38 @ 2.5)

None

Steel
Case

MODEL 71

General purpose
standard seal
Bonded design

1/4 thru 7-1/4

(6.4 thru
184.2)
limited
sizes
available

1000 (5.1)

0.005 @ 1000
(0.13 @ 5.1)

None

Steel Case

MODEL 91

Equivalent to
Model 71 with
rubber O.D. for
non-ferrous
housings
Bonded design

9/32 thru 5
(7.1 thru
127)
limited
sizes
available

1000 (5.1)

0.005 @ 1000
(0.13 @ 5.1)

None

Rubber
Covered
Steel
Case

FPM = feet per minute

MPS = meters per second

Standard sealing element is nitrile.

Model 57 available in nitrile, silicone MILL-RIGHT and
fluoroelastomer.
*Stainless steel available on special order.
**Plated cases available on special order. Special tooling may
be required for stainless steel cases.
4

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not be
undertaken without independent study and evaluation ror suitability. For specific application recommendations
consult Garlock. Failure to select the proper sealing products could result in property damage and/or
serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports
and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to change
without notice.

Dual Opposed Lips - Both Lips with Spring,

Separates Lubricant from a Dissimilar Fluid

Features
MODEL 53R2

Heavy duty case

Assembled design

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

3 thru 15
(76.4 thru
381)

1000 (5.1)

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.010 @ 500
(0.25 @ 2.5)

Spring

O.D.
Construction

Stainless
Steel
Finger

Steel Case**

Stainless
Steel
Finger

Steel Case**

0.005 @ 1000
(0.13 @ 5.1)

MODEL 63R2

Equivalent to
Model 53R2
Assembled design

1/4 thru 3
(6.4 thru
76.2)

1000 (5.1)

0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

Standard sealing element is nitrile.

**Plated cases available on special order. Special tooling may
be required for stainless steel cases.

FPM = feet per minute

MPS = meters per second

Dual Opposed Lips - One Lip with Spring,

Sprung Lip Retains Lubricants, Un-Sprung Lip Excludes Contaminants

Features
MODEL 3

General purpose
standard design
Bonded design

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

1/2 thru 7-1/4

(12.7 thru
184.2)

4000 (20.3)

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.015 @ 1000
(0.38 @ 5.1)

Spring

O.D.
Construction

Carbon
Steel*
Garter

Steel Case

Stainless
Steel
Finger

Rubber with
reinforced
heel

Stainless
Steel
Finger

Steel Case**

0.010 @ 2000
(0.25 @ 10.2)
0.005 @ 4000
(0.13 @ 20.3)
MODEL 26R1

General purpose,
non-metallic seal
Molded one-piece
construction

3/4 thru 60
(19.4 thru
1524)

5000 (25.4)

0.015 @ 1000
(0.38 @ 5.1)
0.010 @ 2000
(0.25 @ 10.2)
0.008 @ 5000
(0.20 @ 25.4)

MODEL 53R1

Heavy duty case

Assembled design
Equivalent to
Model 63R1
Assembled design

53R1: 3 thru
15 (76.2 thru
381)
63R1: 1/4 thru
3 (6.4 thru
76.2)

2000 (10.2)

0.015 @ 1000
(0.38 @ 5.1)

MODEL 53F1

Felt element
excludes
contaminants
Equivalent to
Model 63F1
Assembled design

53F1: 3 thru
15 (76.2 thru
381)
63F1: 1/4 thru
3 (6.4 thru
76.2)

1000 (5.1)

0.010 @ 1000
(0.25 @ 5.1)

Stainless
Steel
Finger

Steel Case**

MODEL 57

Slow speed
applications
Caster
applications
Available with
single and
dual lips

2 thru 12
(50.8 thru
304.8)

500 (2.5)

0.015 @ 500
(0.38 @ 2.5)

Stainless
Steel
Finger

Rubber
Covered
Steel
Case

MODEL 94

Equivalent to
Model 3 with
rubber O.D. for
non-ferrous
housings
Bonded design

7/16 thru 7-3/8

(11.1 thru
187.3)

3000 (15.2)

0.015 @ 1000
(0.38 @ 5.1)

Carbon
Steel*
Garter

Rubber
Covered
Steel
Case

0.10 @ 2000
(0.25 @ 10.2)

0.10 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

Dual Tandem Lips

Retains Lubricants

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

Non-sprung front
lip serves as a
baffle
Sprung back lip for
effective sealing
Assembled design

3 thru 15
(762 thru
381)

1000 (5.1)

Non-sprung front
lip serves as
a baffle
Sprung back lip for
effective sealing
Assembled deslgn

1/4 thru 3
(6.4 thru
76.2)

Both lips have

spring for effective
sealing
Assembled design

3 thru 15
(76.2 thru
381)

Both lips have

spring for effective
sealing
Assembled design

1/4 thru 3
(6.4 thru
76.2)

Features
MODEL 53TB

MODEL 63TB

MODEL 53T2

MODEL 63T2

FPM = feet per minute

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.010 @ 500
(0.25 @ 2.5)

Spring

O.D.
Construction

Stainless
Steel
Finger

Steel Case**

Stainless
Steel
Finger

Steel Case**

Stainless
Steel
Finger

Steel Case*

Stainless
Steel
Finger

Steel Case*

0.005 @ 1000
(0.13 @ 5.1)

1000 (5.1)

0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

1000 (5.1)

0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

MPS = meters per second

Standard sealing element is nitrile.

*Stainless steel available on special order.
**Plated cases available on special order. Special tooling may
be required for stainless steel cases.

1000 (5.1)

0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not be
undertaken without independent study and evaluation ror suitability. For specific application recommendations
consult Garlock. Failure to select the proper sealing products could result in property damage and/or
serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports
and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to change
without notice.

Single Lip Split - Retains Lubricants

Eliminates Costly Equipment Teardown

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

Low speed
service seal
Cover plate
required for
sealing
installation

3 thru 42
(76.2 thru
1066.8)

1000 (5.1)

General purpose
service seal
Cover plate
required for
sealing
installation

3 and up
(76.2 and up)

Low speed
service seal
Tapered O.D. fits
in tapered groove
in housing
Improved replacement for felt rings

3 thru 21-1/2
(76.2 thru
546.1)

PTFE element for

extremely severe
chemicals
Cover plate
required for
sealing

3 thru 20
max. O.D.
(76.2 thru
508)

1000 (5.1)

General purpose
non-metallic seal
Molded one piece
construction
No cover plate
required
Reinforced heel

1/4 thru 60
(19.4 thru
1524)

5000 (25.4)

Features
MODEL 21

MODEL 23

MODEL 24

MODEL 25

MODEL 26

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

2000 (10.2)

0.010 @ 1000
(0.25 @ 5.1)
0.005 @ 2000
(0.13 @ 10.2)

1000 (5.1)

0.010 @ 500
(0.25 @ 2.5)
0.005 @ 1000
(0.13 @ 5.1)

0.010 @ 500
(0.25 @ 2.5)

O.D.
Construction

Molded in
Stainless
Steel
Finger

Molded
Rubber

Molded in
Stainless
Steel
Finger

Molded
Rubber

Molded in
Stainless
Steel
Finger

Molded
Rubber

Carbon
Steel**
Garter

PTFE

Stainless
Steel
Finger

Rubber with
reinforced
heel

0.005 @ 1000
(0.13 @ 5.1)

0.015 @ 1000
(0.37 @ 5.1)
0.010 @ 2000
(0.25 @ 10.2)
0.008 @ 5000
(0.20 @ 25.4)

Standard sealing element for Models 21, 23 and 24 is nitrile.

FPM = feet per minute
MILL-RIGHT, silicone and fluoroelastomer available.
Bonded spring in Models 21, 23 and 24 allows for simplified installation.
*Stainless steel available on special order.

Preferred applications on grease lubricated or liquid level below shaft centerline.

8

Spring

MPS = meters per second

External Lip Seals

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

External lip
seal
Low speed service
Assembled design

3 thru 50
(76.2 thru
1270)
limited
sizes
available

1000 (5.1)

External lip
seal
Moderate speed
service
Assembled design

3 thru 50
(76.2 thru
1270)
limited
sizes
available

3000 (15.2)

Features
MODEL 111

MODEL 113

Misalignment
& Runout
In. @ FPM
(MM @ MPS)
0.010 @ 500
(0.25 @ 2.5)

Spring

O.D.
Construction

Stainless
Steel
Finger

Steel Case*

Stainless
Steel
Finger

Steel Case*

Stainless
Steel
Finger

Steel Case*

0.005 @ 1000
(0.13 @ 5.1)

0.020 @ 1000
(0.50 @ 5.1)
0.10 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13 @ 15.2)

MODEL 123

External lip
seal
Moderate speed
service
Assembled design

1-5/32 thru 50
(29.4 thru
1270)
limited
sizes
available

3000 (15.2)

0.020 @ 1000
(0.50 @ 5.1)
0.10 @ 2000
(0.25 @ 10.2)
0.005 @ 3000
(0.13@ 15.2)

FPM = feet per minute

MPS = meters per second

Standard sealing element for Models 21, 23 and 24 is nitrile.

MILL-RIGHT, silicone and fluoroelastomer available.
Bonded spring in Models 21, 23 and 24 allows for simplified
installation.
*Stainless steel available on special order.

Preferred applications on grease lubricated or liquid level below

shaft centerline.

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not be
undertaken without independent study and evaluation ror suitability. For specific application recommendations
consult Garlock. Failure to select the proper sealing products could result in property damage and/or
serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports
and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to change
without notice.

Miscellaneous Seals

Features

Shaft
Diameters
In. (MM)

Surface
Speed
FPM (MPS)

Misalignment
& Runout
In. @ FPM
(MM @ MPS)

1000 (5.1)

Does not apply

Stainless
Steel
Finger

Steel Case**

Spring

O.D.
Construction

MODEL 54

Seals spherical
surface on selfaligning or
spherical bearing
Excludes contaminants or fluids
from bearing
Assembled design

For spherical
radii consult
size listing on
page 11

MODEL 61

PTFE element
Excellent chemical
resistance
Recommended for
small quantity
requirements
Assembled design
Pressure to 150 psi

7/16 thru 20
2000 (10.2)
max seal O.D.
(11.1 thru 508
max seal O.D. )

0.005 @ 2000
(0.13 @ 10.2)

None

Steel Case**

MODEL 62

PTFE element
Excellent chemical
resistance
Recommended for
small quantity
requirements
Assembled design

7/16 thru 20
2000 (10.2)
max seal O.D
(11.1 thru 508
max seal O.D. )

0.005 @ 2000
(0.13 @ 10.2)

Carbon
Steel*
Garter

Steel Case**.

MODEL 142

Seals on plane
surface perpendicular to axis or shaft
Developed for steel
mill service to
shield bearing oil
seals from
contaminants
Assembled design

7-1/2 min.
(190.5 min )
Consult size
listing on
page 11

5000 (25.4)

Does not apply

Stainless
Steel
Finger

Steel Case**

MODEL 145

Face type seal

High speed
service
See page 11

7 thru 80
(177.8 thru
2032)

5000 (25.4)

Does not apply

Stainless
Steel
Garter

Does not
apply

FPM = feet per minute

MPS = meters per second

Model 54 standard sealing element is nitrile. silicone and

fluoroelastomer available.
Model 142 available with nitrile sealing element only.
Model 145 available in nitrile, MILL-RIGHT and fluoroelastomer.
*Stainless steel available on special order.
**Plated cases available on special order. Special tooling may
be required for stainless steel cases.
10

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not be
undertaken without independent study and evaluation ror suitability. For specific application recommendations
consult Garlock. Failure to select the proper sealing products could result in property damage and/or
serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports
and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to change
without notice.

Special Purpose
MODEL 54
Seal for Spherical Bearings

Available sizes, Model 54 tangential KLOZURES

Information on other sizes on request
"R" radius
in.
mm

L - Distance from
bearing center
to back of
KLOZURE
R - Radius of
spherical surface*
B - Housing bore*
C - KLOZURE width*
*In the final layout these Model 54 tangential
KLOZURE dimensions as supplied may have to be
altered, but dimensions will be used as a guide in
designing the KLOZURE. In addition to the foregoing
dimensions, a data sheet giving pertinent operating
information should be supplied.

MODEL 142
Steel Mill Water Seal
Radial height x 2 + shaft dia. = O.D. (excluding clamp)
Axial width is overall width.
AXIAL WIDTH

All elements are nitrile

only. All steel parts including clamps are carbon
steel. Spring is stainless
steel. These are the only
materials available for this
model.

MODEL 145A-1
Face Type Excluder Seal

CLAMP
DIMENSION
RADIAL
HEIGHT

21700

ASSEMBLED
DIMENSIONS

1. Height of cross section = 1 (25.4 mm)

2. Shaft contact width = 1-11/32 (34.1 mm)
3. Overall free width = 2-19/32 (65.9 mm)
4. Assembled width = 2 1/2 (50.8 12.7 mm)
5. Shaft diameter
6. Maximum face bore = shaft +1 (shaft + 25.4 mm)
7. Minimum face dia. = shaft + 4-1/2
(shaft + 114.3 mm)

"B" bore
in.
mm

"C" width
+1/64" 0.4 mm

in.

"L"
mm

KLOZURE
Part No.

2-3/8
2-3/4
3-3/8
3-9/16
4

60.33
69.85
85.73
90.49
101.6

5.125
6.000
6.500
7.250
8.000

130.18
152.40
165.10
184.15
203.20

5/8
5/8
5/8
9/16
5/8

15.88
15.88
15.88
14.29
15.88

1-7/32
1-17/64
2-1/16
1-45/64
2-1/4

30.96
32.15
52.39
43.26
57.15

54x6003
54x6005
54x9733
54x6008
54x6010

4-1/4
4-3/8
4-3/4
5
5-l/4

107.95 8.250
111.13 9.125
120.65 9.250
127.00 9.750
133.35 10.750

209.55
231.78
234.95
247.65
273.05

5/8
5/8
5/8
5/8
11/16

15.88
15.88
15.88
15.88
17.46

2-1/2
2
2-5/8
2-3/4
2-1/2

63.50
50.80
66.68
69.85
63.50

54x7351
54x6014
54x9986
54x6018
54x6020

5-5/8
6-5/8
7
8

142.88
168.28
177.80
203.20

288.93
317.50
342.90
374.65

1
5/8
3/4
5/8

25.40
15.88
19.05
15.88

2-11/16
3-3/8
3-5/16
4-1/8

68.26
85.73
84.14
104.78

54x6021
54x6023
54x6024
54x9750

11.375
12.500
13.500
14.750

Cross Section
Radial
Axial
Height
Width
in.
mm
in.
mm
1/2
9/16
9/16
9/16
3/4
1
1
1

12.7
14.29
14.29
14.29
19.05
25.40
25.40
25.40

3/4
1-1/4
1-5/16
1-3/8
1
1-1/4
1-3/8
1-1/2

19.05
31.75
33.34
34.93
25.40
31.75
34.93
38.10

Shaft Diameter or
Minimum I.D. to which
assembly can be formed
in.
mm
7-1/2
12
12
12
18
30
30
30

MODEL 145A-2
Face Type Excluder Seal

190.50
304.80
304.80
304.80
457.20
762.00
762.00
762.00

Clamp
dimension
in.
mm
1-1/4
1-5/16
1-5/16
1-5/16
1-1/8
1-11/32
1-11/32
1-11/32

31.75
33.34
33.34
33.34
28.58
34.13
34.13
34.13

21750

CROSS SECTION
DIMENSIONS

1. Height of cross section = 1/2 (12.7 mm)

2. Shaft contact width = 9/16 (14.3 mm)
3. Overall free width = 31/32 (24.6 mm)
4. Assembled width = 25/32 5/32 (19.8 mm 4.0 mm)
5. Shaft diameter
6. Maximum face bore = shaft + 25/64 (shaft + 9.9 mm)
7. Minimum face dia. = shaft + 1-3/4 (shaft + 44.5 mm)

11

Special Purpose

Utilizing Microcellular Technology

Unique, engineered microcellular
materials interact with the sealing
media to create a barrier to lubricant
leakage and contamination ingestion.
An application data sheet must be
completed to order these seals.
Contact your local Garlock representative or authorized Garlock distributor for details.

MICRO-TEC
Bearing Protector Seal

Available Materials
Component

Standard

Optional

Rotor
and
Stator
O-Rings

Aluminum,
black anodized
coating
Fluoroelastomer
for chemical
and temperature
resistance

Stainless Steel
Carbon Steel
PTFE
silicone
PTFE
Buna-N
Nitrile

Microcellular
Materials

Low Density,
seals out viscous
materials,
Medium Density,
seals out less
viscous materials
High Density,
seals out airborne
contaminants

Specialized
cellular
materials
available for
extreme
applications

Operating Specifications
Parameters

Standard

Speed

0 - 3,600 RPM

Optional
10,000 = RPM

Misalignment
and Runout

0.060 TIR
(1.52mm TIR)

>0.060 TIR
(1.52 mm) TIR

Axial
Misalignment

0.010
(0.254 mm)

>0.010
(0.254 mm)

Pressure

Ambient

7.5 psi
(0.5 bar)

Temperature

-40F to 400F
(-40C to 205C)

TIR = Total Indicator Reading

>400F
(205C)

WARNING:
Properties/applications shown throughout this brochure are typical.
Your specific application should not be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed
from field testing, customer field reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we
assume no responsibility for errors. Specificatlons subject to change
without notice. This edition cancels all previous issues. Subject to
change without notice.

EQUALIZER
The Ultimate Bearing Protector
Features

Benefits

Graphite-filled
PTFE construction standard

Handles high temperatures

Resists most chemicals
Alternate materials available

One-piece
assembled
design

Cannot come apart during

installation or operation

Highest misalignment and

runout allowed

Standard design accepts

0.015'' (0.38 mm) total
misalignment and runout

Sixteen expulsion ports

Seal installs in any rotational

position eliminating installation errors

Narrow crosssection design

available

3/16'' (4.76 mm) minimum

cross-section eliminates
the need to rebore housings

Internal
Stator

Rotor
Fluoroelastomer
O-rings

NO FLANGE DESIGN
Available for application
where flush mounting is
required

SPLIT PILLOW BLOCK

DESIGN
All pillow block
EQUALIZERS are
custom designed and
manufactured ensuring
a precision fit

STANDARD
FLANGED
DESIGN

Oil Level

Flow Path
of Contaminants

Flow Path
of Lubricants
External
Stator

12

BUILT-IN DEFLECTOR
DESIGN
Expulsion ports are
shrouded to accommodate direct spray or
washdown situations

Bearing Isolators
ISO-GARD Bearing Isolators
Standard ISO-GARD
The most aggressive labyrinth in the industry, for
superior contaminant exclusion
Two-piece unitized construction won't come apart
during installation
Supports predictive maintenance programs and
reduces unscheduled downtime
PTFE material provides excellent chemical
resistance and wide temperature capability
Non-contact design eliminates shaft scoring, drag
and frictional heatno lubrication required
Press-fit design means easy installationno tools
required
Performs in accordance with NEMA MGI as
required by IEEE Std. 841
Constructed of FDA-compliant, glass-filled
PTFE material

Specifications
Material:
Temperature:
Surface speed:
Axial motion:
Misalignment
and runout:
Pressure:

Blue, glass-filled PTFE

-40F to +400F
(-40C to +204C)
To 4,500 fpm (22.9 m/s)
0.015" (0.38 mm)

Available with FDA-compliant O-rings.

Fluoroelastomer
O-Rings

Expulsion of
Contaminants

Stator

Inclusion of
Lubricants

0.020" (0.50 mm)

Ambient*

* 5 psi for Grease-Purgeable ISO-GARD

Also available in grease purgeable, flangeless
and vertical designs
Also available in graphite-filled PTFE, stainless
steel filled PTFE, bronze and stainless steel
material

Shaft
Drain
Port

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application
should not be undertaken without independent study and evaluation ror suitability. For specific
application recommendations consult Garlock. Failure to select the proper sealing products
could result in property damage and/or serious personal injury.

Rotor

Housing

Performance data published in this brochure has been developed from field testing, customer
field reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility
for errors. Specificatlons subject to change without notlce. Thls edition cancels all prevlous
issues. Subject to change without notice.

Expulsion
Port
13

General Engineering Data

Garlock precision-made KLOZURE Oil Seals are designed

and engineered to give long and effective service on any job
for which an oil seal is required.
Satisfactory sealing service cannot be achieved unless the
shaft and surrounding machine parts are in proper mechanical
condition. Shaft speeds, temperatures and other operating
factors also have an important bearing upon all seal performance. Recommended practices and limitations affecting oil
seal applications are set forth in the following paragraphs and
tables.

Shaft finish
The degree of sealing efficiency of an oil seal is almost in
direct proportion to the condition of the shaft surface in contact with the sealing member. Rough, poorly finished shafts, or
shafts with turning or grinding spirals or "threads", cannot be
effectively sealed. New sealing surfaces are required for the
replacement oil seal. See Table 1 for speclfic recommendations.

Shaft-to-bore misalignment and dynamic runout

Shaft-to-bore misalignment is defined as the distance by
which the shaft is off-center with respect to the bore.
Dynamic runout is defined as the amount by which the shaft
(at the sealing surface) does not rotate around the true center.
It is measured by the total movement of a dial indicator held
against the shaft surface while the shaft is slowly rotated (see
Figure A, Page 16). This is read as total indicator reading, or
TIR.
Perfect concentricity of the shaft and housing is rarely possible
or necessary, but the faster the shaft turns, the more nearly
concentric the two should be. Excessive misalignment causes
uneven wear and can shorten seal life. Good practice dictates
that the shaft-to-bore misalignment not exceed 0.010"
(0.25 mm).
Similarly, dynamic runout affects sealing efficiency and
should be kept below 0.010" (0.25 mm) TIR.

Pressure data
Standard oil seals should not be used when the operating
pressure exceeds the limits shown in Table 2, Page 15.

satisfactory seal performance. See Tables 3, 4 and 5, Page 15

and 16.
The bore tolerances apply only to ferrous materials. When
non-ferrous materials such as aluminum are used, full details
should be submitted for recommendation. Seal width tolerance
is 1/64" (0.4 mm).

Standard seal torque

Torque readings for oil seals can be as varied as the number
of different oil seal applications. Factors that vitally affect
the dependability and uniformity of a torque reading include
(1) rate and uniformity of shaft rotation, (2) amount of
lubrication, (3) type of lubrication, (4) ambient temperatures,
(5) shaft finish, (6) seal alignment, and (7) sealing element
material. Due to these factors, oil seal torque figures, to be of
value, must be developed for each application.

Important note
The recommendations in this catalog as to shaft finishes,
misalignment, runout, speeds, temperatures and tolerances
are those generally applicable, but they are not to be interpreted as applying, without reservation or exception, to each
and every application. The model and type of seal selected for
a given application, and other conditions surrounding that
application, may modify these average limitations one way or
the other. Therefore, it is desirable in most cases to provide
full information to Garlock and let our experienced staff of
engineers submit a recommendation.

Table 1
Shaft Data
Hardness

Rockwell C 30 to 40
(Rockwell C 45 minimum will provide
extra protection against damage during
handling or assembly)

Finish
(Plunge grind is
recommended as
most satisfactory)

10-20 mu in. AA (0.25-0.50 micrometers) with no machine lead, scratches,

dents, corrosion, pits or other surface
defects

Surface speed*

Formula:
Feet-Per-Min. = Shaft Dia. (in)
x RPM x 0.262
Meters-Per-Sec. = Shaft Dia. (mm)
x RPM x 0.0000524

Safe speed
depends on**

1. Shaft finish
2. Misalignment and runout
3. Amount and kind of lubricant
4. Seal design
5. Pressure

When variable surge pressures exceeding the above limits

are present, a special condition exists and full details should
be submitted for engineering recommendation.
Higher operating pressures may be feasible if a custom seal
is considered. However, when a pressure seal is used,
features such as the ability to take greater eccentricities are
sacrificed. Whenever possible, the equipment design should
be such that the system is vented. This will allow the seal to
function more efficiently.
Tolerance
Close tolerances in the finished dimenions of the shaft, in the
bore of the housing, and in the oil seal itself are essential to
14

* Pages 1 thru 10 show recommended KLOZURE Oil Seals for various

speeds and operating conditions.
** As shaft speed increases, the factors become more critical.

General Engineering Data Tables

Table 2
Operating Pressure Limits

Table 3
Shaft Diameter Tolerances
Maximum*
Pressure

Shaft Speed

Recommended
Tolerance

Shaft Diameter

Feet per
Minute

Meters per
Second

Pounds per
Square Inch

KiloPascals

Inch

Millimeter

Inch

Millimeter

Up thru 4.000

Up thru 101.60

0.003

0.08

0 - 1000

0 - 5.1

48

4.001 - 6.000

101.61 - 152.40

0.004

0.10

1001 - 2000

5.2 - 10.2

35

6.001 - 10.000 152.41 - 254.00

0.005

0.13

2001 & Up

10.3 & Up

21

10.001 & Up

0.006

0.15

254.01 & Up

*Split KLOZURE Oil Seals are not recommended for applications involving
fluid pressure

Table 4
Bore Tolerance and Seal Press Fits for Metal O.D. Seals
Housing Bore Diameter
(Nominal)

Recommended Bore
Diameter Tolerance

Press Fit* Range

Inch

Millimeter

Inch

Millimeter

Inch

Millimeter

Thru 1.000

Thru 25.40

0.001

0.03

0.002 to 0.006

0.05 to 0.15

1.001 - 3.000

25.41 - 76.20

0.001

0.03

0.002 to 0.007

0.05 to 0.18

3.001 - 4.000

76.21 - 101.60

0.0015

0.04

0.003 to 0.007

0.08 to 0.18

4.001 - 4.375

101.61 - 111.13

0.0015

0.04

0.003 to 0.008

0.08 to 0.20

4.376 - 6.000

111.14 - 152.40

0.0015

0.04

0.003 to 0.010

0.08 to 0.25

6.001 - 7.000

152.41 - 177.80

0.002

0.05

0.004 to 0.011

0.10 to 0.28

7.001 - 8.000

177.81 - 203.20

0.002

0.05

0.004 to 0.013

0.10 to 0.33

8.001 - 9.000

203.21 - 228.60

0.002

0.05

0.005 to 0.014

0.13 to 0.36

9.001 - 10.000

228.61 - 254.00

0.002

0.05

0.006 to 0.016

0.15 to 0.41

10.001 - 20.000

254.01 - 508.00

+0.002

+0.05

0.006 to 0.020

0.15 to 0.51

-0.004

-0.10

+0.002

+0.05

0.006 to 0.024

0.15 to 0.61

-0.006

-0.15

+0.002

+0.05

0.006 to 0.026

0.15 to 0.66

-0.006

-0.15

+0.002

+0.05

0.006 to 0.03

0.15 to 0.81

-0.010

-0.25

20.001 - 30.000
30.001 - 40.000
40.001 - 60.000

508.01 - 762.00
762.01 - 1016.00
1016.01 - 1524.00

Recommended Bore Finish = 100 microinches AA (2.54 micrometers) or smoother.

* Press Fit = Seal O.D. minus nominal bore diameter (Seal O.D. is the average of a minimum of three measurements taken at equally spaced positions).

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not
be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field
reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for
errors. Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject
to change without notice.

15

General Engineering Data Tables

Table 5
Bonded Lip Type Seals
Bore Diameter
Inch
mm

Press Fit Allowance

Metal Case
Rubber Covered Case
Inch
mm
Inch
mm

Tolerance
Metal Case Rubber Covered Case
Inch
mm
Inch
mm

Up to 1.000

Up to 25.40

+0.004

+0.10

+0.006

+0.15

0.002

0.05

0.003

0.08

1.001 - 2.000

25.43 - 50.8

+0.004

+0.10

+0.007

+0.18

0.002

0.05

0.003

0.08

2.001 - 3.000

50.83 - 76.2

+0.004

+0.10

+0.010

+0.25

0.002

0.05

0.003

0.08

3.001 - 4.000

76.23 - 101.6

+0.005

+0.13

+0.010

+0.25

0.002

0.05

0.004

0.10

4.001 - 6.000

101.63 - 152.4

+0.005

+0.13

+0.012

+0.30

0.10

152.43 - 203.2

+0.006

+0.15

+0.012

+0.30

0.004

0.10

8.001 - 10.000

203.23 - 254.0

+0.008

+0.20

+0.012

+0.30

0.004

0.10

10.001 - 20.000

254.03 - 508.0

+0.008

+0.20

+0.015

+0.38

+0.08
-0.05
+0.08
-0.05
+0.10
-0.10
+0.15
-0.05

0.004

6.001 - 8.000

+0.003
-0.002
+0.003
-0.002
+0.004
-0.002
+0.006
-0.002

0.005

0.13

Figure A
Shaft to Bore Misalignment

Rubber O.D. Seals

Model 57
Bore Diameter
Inch
mm
3.000
76.2

Press Fit
Inch mm
0.009 0.23

Tolerance
Inch
mm
0.004 0.10

3.001 - 5.000

76.23 - 127.0

0.010

0.25

0.004

0.10

5.001 - 6.000

127.03 - 152.4

0.012

0.30

0.005

0.13

6.001 - 10.000

152.43 - 254.0

0.012

0.30

0.005

0.13

10.001 - 20.000 254.03 - 508.0

0.015

0.38

0.005

0.13

SHAFT

X = SHAFT-TO-BORE
MISALIGNMENT

CL
X

BORE C
L

SHAFT

BORE

Model 87/88
Bore Diameter
Inch
mm
6.000 - 8.000
152.4 - 203.2

Press Fit
Inch mm
0.018 0.46

Tolerance
Inch
mm
0.006 0.15

8.001 - 12.000

203.23 - 304.8

0.020

0.51

0.008

0.20

12.001 - 23.749 304.83 - 603.2

0.025

0.64

0.008

0.20

23.750 - 48.000 603.25 - 1219.2

0.030

0.76

0.010

0.25

Figure B
Dynamic Runout
2 Y = DYNAMIC
RUNOUT (TIR)
Y
CENTER OF ROTATION
OF SHAFT
SHAFT C
L

16

BORE C
L

General Engineering Data Tables

Model 26
Bore Diameter
Inch

mm

Press Fit Allowance

Inch
mm

Tolerance
Inch

mm

0.005

0.13

+0.010

+0.25

-0.005

-0.13

+0.010

+0.25

-0.005

-0.13

+0.010

+0.25

-0.005

-0.13

+0.010

+0.25

-0.005

-0.13

+0.010

+0.25

-0.005

-0.13

1.000 - 2.999

25.40 - 76.2

0.025

0.64

3.000 - 5.999

76.2 - 152.4

0.028

0.71

6.000 - 7.999

152.4 - 203.2

0.030

0.76

8.000 - 9.999

203.2 - 254.0

0.035

0.89

10.000 - 10.999

254.0 - 279.4

0.040

1.02

11.000 - 11.999

279.4 - 304.8

0.045

1.14

12.000 - 12.999

304.8 - 330.2

0.048

1.22

0.010

0.25

13.000 - 13.999

330.2 - 355.6

0.050

1.27

0.010

0.25

14.000 - 15.999

355.6 - 406.4

0.055

1.40

0.010

0.25

16.000 - 16.999

406.4 - 431.8

0.060

1.52

0.010

0.25

17.000 - 17.999

431.8 - 457.2

0.065

1.65

0.010

0.25

18.000 - 18.999

457.2 - 482.6

0.070

1.78

0.010

0.25

19.000 - 20.999

482.6 - 533.4

0.075

1.91

0.010

0.25

21.000 - 21.999

533.4 - 558.8

0.080

2.03

0.015

0.38

22.000 - 22.999

558.8 - 584.2

0.085

2.16

0.015

0.38

23.000 - 23.999

584.2 - 609.6

0.090

2.29

0.015

0.38

24.000 - 24.999

609.6 - 635.0

0.093

2.36

0.015

0.38

25.000 - 25.999

635.0 - 660.4

0.095

2.41

0.015

0.38

26.000 and Up

660.4 and Up

0.100

2.54

0.015

0.38

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not
be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field
reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for
errors. Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject
to change without notice.

17

Nomenclature

Figure C
Assembled Design

Figure D
Bonded Design
1

2
4
5

5
3

13

9
11

11

10
12

1.
2.
3.
4.
5.
6.
7.

12

Case Width
Outer Case
Inner Case
Inside Face
Outside Face
Seal Outer Diameter
Garter Spring

8.
9.
10.
11.
12.
13.

Spring Retaining Clip

Flex Section
Secondary Lip
Control Line
Lip Diameter
Finger Spring

Figure E
Shaft & Housing

1.
2.
3.
4.
5.
6.

Shaft Diameter
Bore Diameter
Bore Depth
Shaft Lead Corner
Bore Lead in Chamfer
Corner Radius

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not be
undertaken without independent study and evaluation ror suitability. For specific application recommendations
consult Garlock. Failure to select the proper sealing products could result in property damage and/or
serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports
and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to change
without notice.

18

Selection Charts for Seal Elements

Advantages

Nitriles
Low cost
Good oil and
abrasion
resistance
Good low
temperature
and swell
characteristics

Disadvantages Lacks exceptional heat

resistance
Tendency to
harden during
high temperature usage

MILL-RlGHT
Good oil
resistance
Excellent abrasion resistance
Good heat
resistance
Good low temperature and swell
characteristics
Can be difficult
to split due to
the toughness
of the material
Chemical
resistance
similar to
nitrile

Mechanical, Temperature Compatibility

Durometer
70-90
Compression
Good
Dry Running
Good
Abrasion Resistance
Good
Minimum Operating
-40F (-40C)
Maximum Operating
240F (120C)
Ozone Resistance
Fair
ATF
Good
Brake Fluid
Poor
Butane
Good
Engine Oil
Good
EP Lube
Fair
Freon
Good
Fuel Oil
Good
Gasoline
Good
Grease
Good
Hydraulic Oil (pet. base)
Good
Ketones
Poor
MIL-L-2105B
Fair
MIL-L-5606B
Good
MIL-L-6082C
Good
MIL-L-7808F
Fair
MIL-L-10924B
Good
Perchloroethylene
Fair
Phosphate Ester
Poor
SAE 90
Good
Skydrol 500***
Poor
Water (Fresh)
Good
Water (Salt)
Good

Fluoroelastomers
Viton* Fluorel
Resistant to
wide variety of
additives and
fluids
Exceptional
heat resistance
Low swell
characteristics

TFE fluorocarbon Teflon**

Offers practically
universal resistance
to fluid media
Low friction
material
Good heat
resistance

High swell charHigh cost

acteristics in
Special tooling
some lubricants
may be required
Poor chemical
resistance to
oxidized oils and
some EP additives
Poor dry running
characteristics
Easily damaged
by handling

Poor seal performance with high

runout or misalignment
Special tooling
usually required
High cost
Susceptible to
installation damage

Silicones
Good heat
resistance
Excellent low
temperature
properties

75
80
Good
Good
Good
Poor
Excellent
Poor
-40F (-40C) -75F (-60C)
350F (175C) 350F (175C)
Good
Good
Good
Good
Poor
Poor
Good
Fair
Good
Good
Fair
Poor
Good
Poor
Good
Poor
Good
Poor
Good
Fair
Good
Good
Poor
Poor
Fair
Poor
Good
Poor
Good
Good
Fair
Good
Good
Poor
Fair
Poor
Poor
Good
Good
Poor
Poor
Good
Good
Good
Good
Good

The above ratings are general with respect to different polymers.

Specific ratings depend on the specific compound, specific fluid,
temperature and degree of exposure of immersion.

70-80
Good
Fair
Fair
-22F (-30C)
400F (205C)
Good
Good
Fair
Good
Good
Good
Fair
Good
Good
Good
Good
Poor
Fair
Good
Good
Good
Good
Good
Good
Good
Poor
Good
Good

* DuPont Dow Elastomers Trademark

*** Monsanto Company Trademark

3M Company Trademark

Proprietary Garlock material

Good
Good
-120F (-85C)
400F (205C)
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good
Good

** DuPont Trademark

19

Installation Instructions

Like any precision-made machine part, a Garlock

KLOZURE Oil Seal should be handled with reasonable
care when being installed in your equipment. Although a
KLOZURE Oil Seal is compactly built and is not fragile,
rough handling may mar or damage the flexible lip of
the sealing member, resulting in an imperfect sealing
job.

Recommended Shaft Lead Corner

Figure 1

Assembled and Bonded Seals

Check sizes
Before proceeding with the installation, make sure that
the seal of the correct size has been selected and that
the surrounding equipment parts are in proper condition. It is suggested, therefore, that the following checks
should be made.
1. Is the seal of correct size to fit the shaft? If the shaft
is undersize, leakage may follow. If the shaft is oversize,
excessive frictional drag may result.
2. Is the bore that is to receive the seal of the proper
diameter so that a leakless press fit will be obtained?

Preparation of oil seal

An oil seal does not require any special treatment or
conditioning prior to its assembly in the equipment.
However, a film or coating of a suitable lubricant makes
it easier to apply the seal over the shaft or mounting
tool. We recommend lubricating either the shaft or seal
lip before mounting seal.

Preparation of shaft
The shaft surface over which the seal will slide must be
smooth and free from burrs, nicks or scratches which
may damage the sealing lip. Recommended shaft finishes are shown on Table 1, page 14. The free, inside
diameter of the lip of a seal is smaller than the diameter
of the shaft on which it is used. The end of the shaft
should be chamfered or rounded to prevent lip damage
and to ease installation of the seal. See Figure 1.

A - Shaft Diameter

B - Minimum*

Inch

mm

Inch

mm

Thru 0.394
0.395 - 0.787
0.788 - 1.181
1.182 - 1.575
1.576 - 1.969
1.970 - 2.756
2.757 - 3.740
3.741 - 5.118
5.119 - 9.449
9.450 & Up

Thru 10.00
10.01 - 20.00
20.01 - 30.00
30.01 - 40.00
40.01 - 50.00
50.01 - 70.00
70.01 - 95.00
95.01 - 130.00
130.01 - 240.00
240.01 & Up

0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.110
0.140
0.220

0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.75
3.50
5.50

*If a shaft lead-in radius is used, maintain the diametral difference to no less than indicated value
Figure 2

If for any reason the shaft cannot be chamfered or

rounded, then a suitable mounting tool should be used
for applying the seal. Typical tools for this purpose are
shown in Figure 2.

Preparation of housing bore

The bore should be chamfered to permit easy entry of
the seal and should have smooth, machined surfaces.
Rough surfaces may score the metal case of the seal
and permit seepage. See Figure 3, page 21.
When a lubricant head is present, if the bore is 100
microinches AA (2.54 micrometers) or better, bore leakage problems should not be encountered if no tool
removal defects are present.
20

Remove all burrs, break or chamfer all sharp edges.

Surfaces over which seal slides must be smooth and
free from nicks or rough spots.

Installation Instructions

Figure 3
Housing Bore Dimensions
other means is available, the shaft may be wrapped with a
heavy, well-lubricated kraft paper to protect the sealing lip
from the shaft irregularities.

Seating the seal

A suitable press is recommended for pressing an oil seal into
the bore. The press ram or driving tool should not be more
than 0.010 (0.25 mm) smaller in O.D. than the bore diameter
and should have a flat face to contact the back of the metal
case on the seal. If installing the seal in a reverse position, be
sure that the ram pressure is applied only to the rollover bead
around the outer diameter of the seal and not to the inside
face or filler ring inside the metal outer case.

Nominal
Seal Width
Inch

mm

Chamfer
Length
Inch

mm

Thru 0.394 Thru 10.00 0.03-0.04 0.7-1.0

Over 0.394 Over 10
0.05-0.06 1.2-1.5

Max.
Housing
Corner
Radius
Inch

mm

0.020
0.030

0.50
0.75

If the surface is rougher than 100 microinches AA (2.54

micrometers) a bore sealer should be used to insure that no
outside diameter leakage occurs. If oil seals are purchased
without O.D. sealant, a thin coating of shellac or gasket
cement may be applied to the inside of the bore recess or outside of the seal case.
If such materials are used, however, care must be taken to
make certain that none is spilled on the shaft or on the sealing
element.
On grease applications, no bore sealer is required.

Mounting the seal

The preceding recommendations apply to plain shafts. Take
additional precautions to prevent sharp edges from damaging
the sealing lip when mounting a seal on a shaft having keyways or holes. On these shafts, we recommend a mounting
thimble, as shown in Figure 4, page 22. The thimble wall
should be as thin as possible to avoid undue distortion of the
sealing lip during the mounting operation. On very large
shafts, where the use of a thimble may be impractical, brass
shim stock with smooth edges may be wrapped around the
shaft.
An alternate and less desirable method is to fill the keyway or
hole with a smooth wooden plug shaped to protrude slightly
above the surface of the shaft. In an emergency, and if no

If a press is unavailable or the use of a press is not feasible,

the seal may be seated with a driving plug or tool (see Figure
5, page 22). This tool is placed into position and tapped with a
mallet. When large seals are being seated, or in an emergency, a block of wood resting squarely on the seal may be
used instead of a driving tool. When seating a seal 20 (508
mm) in diameter or larger the best practice is to drive it simultaneously at opposite points on its circumference. NEVER HIT
THE SEAL DIRECTLY!
A factor in the functioning of a lip seal is the installed squareness of the seal with respect to the normal shaft centerline.
Good general practice is to keep this within 0.010 (0.25 mm)
TIR. The proper squareness can be obtained by pressing the
seal flush with the front of the bore or bottoming it against a
shoulder. The surface a seal is aligned with should always be
a machined one. Unfinished surfaces should never be used for
alignment purposes because of the danger of cocking the
seal. Typical installation tools are shown in Figure 6, page 22.
Some applications require the seal to be pressed into a separate cover plate or bearing retaining ring, with the assembly
subsequently mounted over the shaft. On this type of installation, care must be exercised to prevent undue distortion of the
sealing member by permitting this heavy assembly to hang on
the shaft, supported only by the seal. Designing the cover
plate or retaining ring with close tolerances over the shaft
helps to relieve the weight on the seal.
If the seal is pressed into a bore or housing before the bearing
is installed, it is essential to support the heavy shaft to prevent
its weight from damaging the sealing element.

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not
be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field
reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to
change without notice.

21

Installation Instructions

Figure 4

Figure 6

A - Ram seated on back of seal

A - Through bore: installation tool bottoms on

machined bore face

Figure 5
B - Driver seated on roll-over bead of seal

B - Bottom bore: seal bottoms on machine bore

shoulder

C - Through bore: installation tool bottoms on shaft

Note: shoulder provides stop and insures mounting seal

at right angle to the shaft

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not
be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field
reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to
change without notice.

22

Garlock Split KLOZURE Oil Seals

Models 21, 23, 24, 25 and 26
The Garlock Split KLOZURE Oil Seal can be split or cut open
on the diameter. The seal is installed by placing it around the
shaft instead of sliding the seal over the shaft as is necessary
with solid seals of the conventional type.

Contractors equipment and machines of other types frequently are operated in isolated localities remote from repair and
service facilities. On such equipment, the renewal of a conventional oil seal may be an exceedingly difficult, expensive and
time-consuming job. A Split KLOZURE Oil Seal, however, can
be installed on the spot easily and quickly by a mechanic or
machine operator.

Split KLOZURE Oil Seals are used on original equipment

applications or maintenance applications to replace a conventional oil seal installation when for any reason the renewal of
the original seal becomes necessary.
For applications to bearings mounted on shafts carrying couplings, gear, sprockets or flywheels as found on heavy equipment in steel mills, pulp and paper mills and other industries,
Split KLOZURE Oil Seals are particularly suitable as they can
be applied without removing or otherwise disturbing those
parts.

The Split KLOZURE Oil Seal, because it is not suitable for

pressure service, will not work as universally on all applications as the conventional Garlock KLOZURE Oil Seal. If in
doubt as to whether a split or conventional oil seal is more
suitable for a specific application, supply your Garlock representative with full details and Garlock will make a recommendation.

Table 6
inch/(mm)

Model 23 Split KLOZURE Size Capability

0.375/(9.5)

0.437/(11.1)

SHAFT SIZES
3 - 151/8
(76.2 - 384.17)
&
28.1 - 35
(714.37 - 889)

SHAFT
SIZES
3 & UP
(76.2
& UP)

RECESS DEPTH (AXIAL SPACE)

0.500/(12.7)

0.562/(14.3)

SHAFT SIZES
3 - 151/8
(76.2 - 384.17)

SHAFT SIZES
111/4 - 151/8
(285.75 - 384.17)

SHAFT SIZES
7.8 - 151/8
(200.02 - 384.17)

0.625/(15.9)

SHAFT SIZES
5 & UP
(127 & UP)

SHAFT SIZES
81/2 - 20
(215.9 - 508)

0.687/(17.5)

0.750/(19.0)

SHAFT SIZES
81/2 & UP
(215.9 & UP)

0.812/(20.6)

0.875/(22.2)

SHAFT SIZES
30 & UP
(762 & UP)

NONE AVAILABLE
0.937/(23.8)
1.000/(25.4)
0.437
(11.1)

0.500
(12.7)

0.562
(14.3)

0.625
(15.9)

0.687
(17.5)

0.750
(19.0)

0.812
(20.6)

0.875
(22.2)

0.937
(23.8)

1.000
(25.4)

RADIAL SPACE

23

Conversion Instructions - Split Seals

When converting equipment from conventional oil seals to

Split KLOZURE Oil Seals, the following instructions should be
followed.

5. Purchase the Split KLOZURE Oil Seal required and install

as outlined.

1. Obtain shaft diameters, bore diameter and recess depth

dimensions of existing seal or equipment (Figure 12, page
25).

Manufacturers of original quipment can supply equipment

incorporating a conventional seal but with the ability to convert
to a split seal in the field. The following suggestions are of
assistance.

2. Check size listing section (Table 6, page 23) to determine

availability of a Split KLOZURE Oil Seal for the equipment
dimension.

a. Design into the equipment a conventional oil seal with the

same shaft, bore and width dimensions as a stock Split
KLOZURE Oil Seal.

Non-stock Split KLOZURE Oil Seal sizes

b. Supply the equipment with the cover plate required for the
Split KLOZURE Oil Seal. The end user then can make the
conversion from a conventional oil seal to a split seal without
any modifications to the equipment.

Sizes other than those shown in the stock listing can be produced, provided the radial and axial dimensions fall within the
limits shown in Table 6, page 23.
To determine the radial and axial dimensions of your application, use the following formula:
A. Bore Diameter - Shaft Diameter
2

Radial
(Packing)
Space

B. Bore Housing Recess Depth = Axial Space

Example:
Bore Diameter = 11.875 (301.63 mm)
Shaft Diameter = 10.250 (260.35 mm)
Recess (Packing) Depth = 0.750 (19.05 mm)
(Bore Diameter - Shaft Diameter)
11.875 _
10.250
(301.63 mm) (260.35 mm)
2

0.812 (20.62 mm)

Radial Space

(Recess Depth) 0.750 (19.05 mm) = Axial space

Using Table 6, locate 0.812 (20.62 mm) Radial Space. Move
up until the Axial Space of 0.750 (19.05 mm) has been located. Note that this point falls in a box showing shaft size 8-1/2
(215 mm) to 20 (508 mm). Our shaft size in the example is
10.250 (260.35 mm), which falls within the shaft sizes of
8-1/2 (215 mm) to 20 (508 mm), therefore this seal can be
produced.
NOTE: In some cases, the radial and axial dimensions fall on
lines separating segments of the table. When this occurs,
shaft size parameters on either side of the line will apply.

Metric Sizes:
Split KLOZURE Oil Seals are also available in standard
metric dimensions. Price and delivery available on request.

c. Maintenance manuals should include information covering

the replacement of the conventional seal with a Split
KLOZURE Oil Seal and should list the Split KLOZURE Oil
Seal model number and show installation instructions.
The retaining cover plate, which is made in either a solid ring,
two halves, or segments to fit around shafts and bolts or
screws, is supplied by the customer and only through special
arrangements by Garlock. Such metal parts must be made to
meet the requirements of each individual installation.
The shaft, bore and recess depth tolerances shown in Tables
3, 4 (page 15) and 7 (this page) are for the guidance of the
designer. When designing equipment on which these seals
are to be used, these tolerances should be adhered to. When
molding Split KLOZURE Oil Seals, proper allowance in the
radial width of the element is made to insure an interference fit
with the shaft. The seal is also made slightly thicker than the
recess depth so that when the cover plate is applied, the seal
is compressed, preventing leakage and clamping the seal so it
cannot rotate with the shaft.

Table 7
Split KLOZURE Oil Seal Recess Depth
Tolerance
Recess Depth
Inch

mm

Recommended
Tolerance*
Inch

mm

Up thru 0.625 Up thru 15.88

0.002
0.05
0.626 & Up
15.89 & Up
0.004
0.10
*Single seals only. Where application involves two seals, tolerance is to be +0.010-0.000 (+0.25-0.0 mm).

3. Check the equipment operating conditions for shaft speed,

runout, temperatures, etc. to verify that they are compatible
with a Split KLOZURE Oil Seal.

WARNING:

4. Proceed with the equipment alterations if necessary to provide space for the Split KLOZURE Oil Seal selected. The
cover plate should also be fabricated.

Performance data published in this brochure has been developed from field testing, customer field
reports and/or in house testing.

24

Properties/applications shown throughout this brochure are typical. Your specific application should not
be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.

While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to
change without notice.

Installation Instuctions for

GARLOCK Split KLOZURE Oil Seals
A Split KLOZURE Oil Seal should be installed with the split at
the top of horizontal mounted shafts. To insure proper application and to prevent damage to the sealing lip of the Split
KLOZURE Oil Seal, the installation should be accomplished
as follows:
1. See that the recess is thoroughly cleaned and that all burrs
and sharp cutting edges are removed.
2. Apply grease or oil to the shaft.
3. Open Split KLOZURE Oil Seal joint sideways (as shown in
Figure 7) and place it around the shaft at a point near the
recess into which the seal is to be installed.
4. Start the sealing element into the recess at the top of the
housing by lining up the sealing lip on both sides of the joint
as shown in Figure 8. Compress the leading edge of the Split
KLOZURE Oil Seal to enter the housing as shown in
Figure 9.
5. Continue this process around the entire periphery of the
shaft until the sealing element is inserted in the recess.

care to prevent damage to the seal lip. Once seal is seated,

approximately 0.015 (0.38 mm) should be protruding from the
bore cavity allowing compression of seal as described in paragraph 7.
7. Bolt the cover plate tightly into position to compress the
Split KLOZURE Oil Seal in the recess as shown in Figure 11.
Cover plate should be sufficiently heavy to compress the sealing element firmly in recess. Screws or bolts should be as
near as possible to the recess bore to prevent cover plate
from dishing. Model 26 seals do not require a cover plate.
8. When the Split KLOZURE Oil Seal replaces the conventional seal, the equipment recess depth may be greater than
the thickness of the Split KLOZURE Oil Seal, thus requiring a
filler. Filler gaskets or a split metal washer may be used for
this purpose.
9. When a Split KLOZURE Oil Seal is installed at the end of a
plain or sleeve bearing, a drain or vent should enter the space
between the seal and the bearing to prevent pressure building
up at this point.

6. Seat the seal in the recess as indicated in Figure 10 by tapping the seal lightly with a mallet on a block of wood, using

Figure 7

Figure 9

Figure 8

Figure 10

Figure 11

Standard Split-KLOZURE Oil Seal Installation

Figure 12
B = 0.28 X Minimum, 0.5 X Maximum
X = Bore Dia. - Shaft Dia.
2

*Figures shown are for a guide only.

Good machine design practices
should be followed.

Shaft
Diameter

No. of
Bolts*

A Minimum
Plate Thickness

3 - 8
(76.2 - 203.2 mm)

1/8
(3.18 mm)

over 8
(over 203.2 mm)

Bolts on a max. of 6 (152.4 mm)

chord, spacing centered about
split in end plate

1/4
(6.35 mm)
25

Troubleshooting

This chart indicates possible sources of seal trouble on general

applications. Special installations may require a more complete
analysis. If advice or assistance is needed, please contact the
nearest Garlock office.
Possible
sources of
Check for trouble
1. Nicks,
cuts or
tears in
sealing
lip

Rough finish Finish shaft surface from 10 - 20

on shaft
microinches. AA (0.25 - 0.50 micrometers). Remove all burrs. See
Preparation of Shaft page 20.
Improper
installation

Rough
handling
2. Excessive
wear or
hardening of
sealing
element

Use mounting tool to carry sealing lip over keyways, splines and
sharp shoulders. See Mounting
the Seal page 21.
Check methods of storing and
handling. Seals deserve the same
care as the bearings they protect.

Rough finish Finish shaft surface from 10 - 20

on shaft
microinches. AA (0.25 - 0.50 micrometers). See Preparation of
Shaft page 20.
Tight fit
on shaft

Check service recommendations

in catalog to see if correct
KLOZURE Oil Seal model is
being used. Check sizes.

No
lubrication

Be sure adequate lubrication is

present.

Overheating

Check size of seal. Check shaft

fpm speed with catalog recommendations for model KLOZURE
Oil Seal being used. Check
ambient temperatures. Be sure
of proper lubrication.

Pressure

3. Damaged
spring

Suggested remedy

Eliminate pressure by vents or

drainbacks. Be sure vents are open.
Drainbacks should be provided
around bearings or away from
helical gearing to prevent pressure
buildup at seal face.

Improper
installation

Avoid excessive spreading of

sealing lip and spring. See
Mounting the Seal page 21.

Rough
handling

Check methods of storing and

handling.

4. Damaged
case

Improper
driving
tools

Use proper tools of correct

dimensions. See Seating the
Seal page 21.

5. Excessive
shaft
wear

Abrasives

Be sure shaft is clean and that a

slight amount of lubricant is
applied when installing KLOZURE
Oil Seal.

Soft Shaft
26

Use shaft material of Rockwell

C 30 minimum hardness.

Possible
sources of
Check for trouble
6. Scores
in O.D.
of seal

Coarse
machining

Suggested remedy
Give better finish to housing bore.
Check for imperfect casting.

Sharp corChamfer housing bore.

ners on housing bore
Bore
undersize
7. Exces- Light fit
sive
on shaft
leakage

Check housing bore diameter. See

Tolerances page 15.
Check size diameter. See
Tolerances page 15.
Check service recommendations in
catalog to see if correct KLOZURE
Oil Seal is being used.

Abnormal
Use mounting tools with thin wall.
spreading of See Mounting the Seal page 21.
sealing
element
Do not apply over shaft shoulder
more than 1/32 (0.80 mm) larger
than shaft diameter.
Excessive
use of preinstallation
lubricant

Use only slight amount of lubricant

to apply and start seals.

Presence of Polish shaft with crocus cloth. If

lead, helix or possible, alter grinding technique
spiral from
to reduce, eliminate or reverse
grinding in a direction of spirals.
direction causing an outward pumping action
Cocked seals Install seal at right angle to shaft
surface. Use proper driving tool.
Properly prepare housing bore. See
Installation Instructions page 20.
Nicks, cuts
or tears in
sealing lip

See trouble tip number 1.

Damaged
spring

See trouble tip number 3.

Damaged
case

See trouble tip number 4.

Dynamic
runout

Move seal closer to bearing. Be

sure wear sleeves, hubs or retaining
rings are accurately machined concentrically. Avoid looseness in
splines.

Paint on
shaft at
back of
seal

Provide suitable masks so that

paint will not solidify under sealing
element, forcing sealing lip away
from shaft.

Typical KLOZURE Oil Seal Configurations

21

23

24

25

26

26-R1

53

53-F1

53-R1

53-R2

53-T2

54

57

58

59

61

62

63

63-F1

63-R1

63-R2

63-T2

63-TB

64

66

67

68

71

76

87

88

91

92

94

111

113

123

142

145

ISO-GARD

VERTICAL
ISO-GARD

ISO-GARD GP

FLANGELESS
ISO-GARD

ISO-GARD SPLIT FLANGED

PILLOW BLOCK EQUALIZER

SPLIT
PILLOW BLOCK
EQUALIZER

FLANGELESS
EQUALIZER

WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should not
be undertaken without independent study and evaluation ror suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.

Performance data published in this brochure has been developed from field testing, customer field
reports and/or in house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for errors.
Specificatlons subject to change without notlce. Thls edition cancels all prevlous issues. Subject to
change without notice.

27

Garlock

Model Number to Part Number Conversion

MODEL NO.

28

PREFIX

3
21
23
24
25

28003
25001
25003
25005
25058

26
26R1
53
53F1
53R1

24600
24620
21086
22987
22537

53R2
53T2
53TB
53TF
54

22627
22897
22807
22994
21140

58
59
61
61 FDA
61 DBL TANDEM

21003
24700
24060
24061
24062

61 DBL OPPOSED
61 REVERSE LIP
62
63
63F1

24063
24064
21702
21158
23078

63R1
63R2
63T2
63TB
63TF

23547
23548
23550
23549
23735

64
66
66F1
66R1
66R2

21238
21527
23692
23722
23702

66T2
66TF
67
67R2
67T2

23728
23763
21528
23683
23621

MODEL NO.

PREFIX

68
68R2
71
76

21823
23727
26001
26193

87
88
88NS
91
92

26080
26088
26188
27023
27063

94
111
113
123
142

27223
21011
21012
21016
21432

145A1
145A2
EQ
EQ
EQ

21700
21750
24801
24802
24807

EQSPB
IG
IG
IG
IG

24816
29500
29502
29507
29519

IGSPB

29516

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

28003-0060
28003-0072
28003-0081
28003-0201
28003-0213
28003-0225
28003-0427
28003-0446
28003-0458
28003-0488
28003-0678
28003-0687
28003-0715
28003-1004
28003-1020
28003-1028
28003-1113
28003-1128
28003-1224
28003-1232
28003-1246
28003-1262
28003-1348
28003-1360
28003-1368
28003-1378
28003-1454
28003-1462
28003-1472
28003-1492
28003-1576
28003-1590
28003-1598
28003-1704
28003-1714
28003-1726
28003-1802
28003-1814
28003-1826
28003-2023
28003-2035
28003-2171
28003-2186
28003-2303
28003-2317
28003-2329
28003-2536
28003-2683
28003-2710
28003-2719
28003-2782
28003-2791

0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.750
0.875
0.875
0.875
1.000
1.000
1.000
1.125
1.125
1.250
1.250
1.250
1.250
1.375
1.375
1.375
1.375
1.500
1.500
1.500
1.500
1.625
1.625
1.625
1.750
1.750
1.750
1.875
1.875
1.875
2.000
2.000
2.125
2.125
2.250
2.250
2.250
2.500
2.750
2.750
2.750
2.875
2.875

0.999
1.124
1.250
1.124
1.250
1.375
1.250
1.375
1.499
1.624
1.375
1.499
1.624
1.499
1.624
1.752
1.624
1.874
1.752
1.874
2.000
2.125
2.000
2.125
2.250
2.374
2.125
2.250
2.374
2.502
2.374
2.502
2.623
2.502
2.623
2.750
2.623
2.750
2.875
2.750
2.875
2.875
3.000
3.000
3.125
3.251
3.251
3.500
3.751
3.875
3.751
3.875

0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO

PART NO

SHAFT

BORE

3
3
3
3
3
3
3
3
3
3
3
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21

28003-3104
28003-3221
28003-3254
28003-3460
28003-3478
28003-3568
28003-3721
28003-4010
28003-4255
28003-4455
28003-5680
25001-1380
25001-2087
25001-2663
25001-2813
25001-2915
25001-3023
25001-3056
25001-3111
25001-3122
25001-3151
25001-3174
25001-3254
25001-3288
25001-3334
25001-3355
25001-3370
25001-3468
25001-3523
25001-3555
25001-3557
25001-3606
25001-3623
25001-3642
25001-3672
25001-3925
25001-3926
25001-3932
25001-3937
25001-3943
25001-3951
25001-3979
25001-3983
25001-3984
25001-3989
25001-4012
25001-4047
25001-4058
25001-4072
25001-4094
25001-4099
25001-4128

3.125
3.250
3.250
3.500
3.500
3.625
3.875
4.000
4.250
4.500
5.500
4.500
18.437
4.250
4.625
5.000
5.125
5.187
17.717
5.375
5.375
5.437
24.000
5.750
5.875
6.000
6.000
6.750
7.250
7.500
7.500
8.250
9.000
9.500
10.000
8.000
8.000
8.125
8.500
8.625
8.750
9.500
9.500
9.500
9.750
10.500
11.250
11.500
12.000
13.000
13.000
13.500

4.125
4.249
4.500
4.376
4.500
4.626
4.876
4.999
5.251
5.501
6.750
6.500
20.500
5.500
6.250
6.000
7.500
7.500
19.685
6.375
7.500
7.500
25.000
7.500
7.500
7.000
7.500
8.500
8.500
9.125
9.250
9.500
11.000
11.000
11.500
10.000
10.000
10.125
10.000
10.500
10.750
11.000
11.500
11.500
11.750
12.000
13.250
13.000
14.000
14.500
15.000
15.500

WIDTH
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.812
0.500
0.500
0.500
0.500
0.500
0.811
0.500
0.625
0.500
0.500
0.562
0.750
0.500
0.750
0.625
0.750
0.750
0.750
0.625
0.750
0.625
0.750
0.750
0.812
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.750
0.750
0.812
0.750
0.812
0.750
0.812
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-1

Oil Seals by Model Number

MODEL NO
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21

Garlock

PART NO

SHAFT

BORE

WIDTH

25001-4130
25001-4132
25001-4135
25001-4140
25001-4143
25001-4147
25001-4152
25001-4155
25001-4156
25001-4162
25001-4163
25001-4178
25001-4180
25001-4189
25001-4207
25001-4211
25001-4212
25001-4441
25001-4614
25001-4633
25001-4651
25001-4675
25001-4676
25001-4712
25001-4779
25001-4780
25001-4795
25001-4929
25001-4940
25001-4971
25001-5023
25001-5038
25001-5055
25001-5062
25001-5312
25001-5373
25001-5376
25001-5410
25001-5552
25001-5612
25001-5739
25001-5906
25001-5919
25001-5934
25001-6092
25001-6293
25001-6296
25001-6356
25001-6360
25001-6363
25001-6372
25001-6378

13.937
14.000
14.000
14.250
14.500
14.750
15.000
15.000
15.000
15.500
15.500
16.000
16.000
17.000
18.000
18.250
18.250
12.063
14.187
6.299
4.000
24.500
25.750
17.000
13.250
6.000
15.875
9.000
21.000
17.000
3.000
16.500
20.500
14.250
21.000
8.267
38.750
6.500
24.000
28.875
31.000
10.000
24.000
10.500
9.062
4.250
22.000
3.250
4.000
4.500
6.750
7.500

15.437
15.500
16.000
16.250
16.000
16.250
16.500
17.000
17.000
17.000
17.500
17.500
18.000
18.500
19.750
19.750
19.875
13.625
16.187
7.874
5.000
25.625
26.875
19.000
15.250
8.250
17.750
10.500
22.000
18.125
4.000
18.500
22.500
15.750
22.750
9.842
40.687
8.500
25.125
29.750
32.500
12.000
26.000
11.750
11.062
5.750
23.500
4.250
5.000
5.500
7.750
8.500

0.687
0.750
0.812
0.812
0.750
0.687
0.750
0.750
0.812
0.750
0.812
0.750
0.812
0.750
0.750
0.750
0.750
0.750
0.812
0.630
0.500
0.500
0.500
0.875
0.812
0.750
0.875
0.812
0.500
0.547
0.375
0.875
0.812
0.750
0.750
0.618
0.812
0.585
0.500
0.500
0.750
0.687
0.812
0.625
0.750
0.500
0.500
0.375
0.375
0.375
0.500
0.500

MODEL NO
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21

PART NO

SHAFT

BORE

WIDTH

25001-6383
25001-6384
25001-6387
25001-6389
25001-6396
25001-6397
25001-6398
25001-6399
25001-6401
25001-6407
25001-6426
25001-6473
25001-6508
25001-6559
25001-6938
25001-6963
25001-6973
25001-7101
25001-7107
25001-7138
25001-7154
25001-7175
25001-7213
25001-7322
25001-7407
25001-7412
25001-7413
25001-7489
25001-7539
25001-7573
25001-7622
25001-7710
25001-7838
25001-7912
25001-8208
25001-8271
25001-8381
25001-8423
25001-8446
25001-8502
25001-8560
25001-8564
25001-8589
25001-8606
25001-8742
25001-8773
25001-8888
25001-8967
25001-9083
25001-9156
25001-9267
25001-9418

8.500
8.500
9.000
9.625
12.750
16.250
16.750
18.000
22.000
42.000
19.750
38.500
19.000
3.500
18.000
5.625
7.874
8.500
29.133
34.000
33.250
13.750
3.125
9.062
21.500
31.000
18.000
22.500
15.250
14.250
6.750
26.000
23.000
7.725
22.000
14.875
21.937
17.000
19.500
24.000
8.500
9.000
12.500
8.661
10.000
25.625
14.750
8.250
18.000
31.750
8.375
8.000

9.500
9.750
10.000
11.625
14.750
18.250
18.750
20.000
24.000
44.000
21.750
40.500
21.000
4.390
19.625
8.000
9.875
10.500
31.133
36.000
35.250
14.750
3.875
10.062
23.500
33.000
19.750
24.500
17.250
16.000
9.062
28.000
25.000
9.375
23.125
16.875
22.937
18.250
21.500
25.625
10.500
10.910
14.062
10.236
11.910
26.750
16.125
10.250
20.250
33.750
10.375
9.875

0.500
0.625
0.500
0.750
0.750
0.812
0.750
0.812
0.812
0.812
0.812
0.812
0.812
0.336
0.812
0.500
0.625
0.750
0.812
0.812
0.750
0.500
0.375
0.500
0.812
0.812
0.812
0.812
0.750
0.875
0.750
0.750
0.812
0.750
0.547
0.812
0.500
0.562
0.812
0.812
0.500
0.838
0.750
0.630
0.838
0.500
0.687
0.750
0.812
0.750
0.750
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-2

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

21
21
21
21
21
21
21
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25001-9477
25001-9521
25001-9554
25001-9696
25001-9756
25001-9835
25001-9893
25003-0128
25003-0202
25003-0203
25003-0205
25003-0208
25003-0241
25003-0375
25003-0408
25003-0416
25003-0417
25003-0419
25003-0420
25003-0422
25003-0429
25003-0432
25003-0450
25003-0453
25003-0455
25003-0458
25003-0459
25003-0460
25003-0464
25003-0466
25003-0476
25003-0477
25003-0479
25003-0480
25003-0483
25003-0489
25003-0500
25003-0501
25003-0503
25003-0504
25003-0506
25003-0510
25003-0518
25003-0519
25003-0521
25003-0527
25003-0528
25003-0530
25003-0570
25003-0579
25003-0581
25003-0582

18.750
8.267
37.500
14.750
8.000
7.875
20.625
2.857
4.062
12.938
10.688
30.688
14.177
32.125
4.449
11.418
52.500
5.060
11.250
3.847
21.811
15.500
15.375
13.750
26.000
28.486
52.186
44.185
23.512
9.125
9.409
17.750
16.094
14.094
21.250
13.250
5.523
30.500
3.907
7.480
22.625
17.717
18.110
5.748
3.187
6.250
9.437
6.000
8.560
9.000
5.098
23.428

20.250
9.842
39.500
16.250
9.910
9.500
22.625
3.857
5.256
14.250
11.742
31.750
15.500
34.687
5.472
12.992
55.000
5.934
13.250
5.063
23.386
17.375
16.750
15.000
27.500
29.860
54.186
46.188
25.512
10.799
10.909
19.373
17.500
15.500
22.637
14.250
6.500
32.500
5.118
8.661
24.125
18.898
19.843
7.087
4.437
7.250
10.750
7.000
9.810
10.032
6.598
24.928

WIDTH
0.812
0.630
0.812
0.668
0.750
0.750
0.812
0.375
0.469
0.625
0.625
0.500
0.750
0.750
0.375
0.709
0.750
0.375
0.625
0.375
0.787
0.812
0.750
0.750
0.750
0.687
0.812
0.812
0.812
0.703
0.625
0.750
0.750
0.750
0.590
0.500
0.500
1.000
0.500
0.472
0.500
0.500
0.787
0.591
0.375
0.375
0.625
0.375
0.625
0.500
0.500
0.750

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-0587
25003-0590
25003-0591
25003-0599
25003-0606
25003-0614
25003-0617
25003-0620
25003-0623
25003-0626
25003-0627
25003-0637
25003-0639
25003-0641
25003-0662
25003-0663
25003-0671
25003-0674
25003-0676
25003-0677
25003-0678
25003-0688
25003-0690
25003-0691
25003-0692
25003-0695
25003-0696
25003-0697
25003-0710
25003-0716
25003-0720
25003-0726
25003-0736
25003-0738
25003-0740
25003-0741
25003-0743
25003-0746
25003-0753
25003-0755
25003-0756
25003-0779
25003-0785
25003-0786
25003-0793
25003-0795
25003-0800
25003-0801
25003-0802
25003-0803
25003-0806
25003-0811

4.330
12.992
13.780
12.250
21.890
14.961
12.750
17.323
12.000
24.625
5.437
6.693
18.898
10.375
15.000
25.625
25.750
5.515
22.000
12.318
11.150
4.562
13.875
12.188
3.625
10.158
25.875
11.813
2.559
17.938
75.188
13.625
4.312
5.437
11.181
5.937
5.500
8.465
19.625
26.875
14.625
30.065
14.438
28.346
2.441
6.495
15.784
7.283
3.750
6.002
2.812
3.938

5.393
14.173
14.961
13.500
23.858
16.535
14.687
19.323
13.875
25.500
6.375
7.677
20.867
12.000
16.250
27.625
28.125
6.497
23.125
13.694
12.526
6.062
15.500
14.000
4.750
11.417
26.750
13.813
3.346
19.313
77.188
15.031
5.437
6.500
12.992
6.875
6.563
9.845
21.079
28.125
16.250
31.065
15.938
30.315
3.346
7.525
17.000
8.268
5.000
7.002
3.560
4.921

WIDTH
0.500
0.394
0.394
0.750
0.812
0.787
0.812
0.750
0.437
0.375
0.500
0.492
0.812
0.750
0.812
0.812
0.750
0.500
0.500
0.500
0.500
0.500
0.600
0.750
0.375
0.630
0.375
0.813
0.394
0.812
0.812
0.750
0.500
0.500
0.622
0.500
0.500
0.645
0.531
0.500
0.750
0.500
0.625
0.984
0.394
0.500
0.500
0.500
0.437
0.500
0.375
0.394

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-3

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-0815
25003-0818
25003-0821
25003-0822
25003-0823
25003-0839
25003-0856
25003-0858
25003-0864
25003-0866
25003-0872
25003-0880
25003-0881
25003-0884
25003-0889
25003-0890
25003-0891
25003-0893
25003-0895
25003-0896
25003-0897
25003-0904
25003-0917
25003-0926
25003-0929
25003-0932
25003-0935
25003-0944
25003-0947
25003-0948
25003-0949
25003-0950
25003-0952
25003-0953
25003-0954
25003-0956
25003-0957
25003-0959
25003-0960
25003-0961
25003-0963
25003-0977
25003-0980
25003-0981
25003-0983
25003-0985
25003-0986
25003-0990
25003-0992
25003-0993
25003-0994
25003-0995

5.118
13.000
10.229
24.500
3.438
20.750
7.090
11.100
24.409
4.134
10.236
36.500
39.000
32.000
15.191
11.024
8.661
13.386
2.938
28.250
11.024
1.750
2.937
5.115
4.279
11.417
20.470
13.375
11.811
49.500
12.000
12.250
74.500
7.375
12.000
5.118
8.611
26.000
8.750
8.465
14.173
4.331
7.716
9.375
7.000
9.000
13.500
12.147
4.295
2.883
13.070
4.375

5.993
14.500
11.729
25.375
4.562
22.250
8.334
12.150
26.378
5.512
12.205
38.438
40.938
33.000
16.191
12.205
10.236
14.961
4.000
29.500
12.992
2.500
4.000
6.118
5.500
13.417
22.470
14.625
13.385
50.750
13.875
13.821
76.500
8.250
13.250
6.614
10.236
27.250
10.750
9.764
15.590
5.331
8.661
10.375
8.450
10.125
14.500
13.688
5.295
3.633
14.570
5.812

0.500
0.812
0.750
0.375
0.375
0.750
0.500
0.625
0.812
0.472
0.630
1.000
1.000
0.500
0.500
0.787
0.591
0.708
0.500
0.625
0.610
0.375
0.500
0.375
0.375
0.812
0.812
0.500
0.812
0.750
0.500
0.719
0.812
0.438
0.750
0.630
0.750
0.625
0.625
0.590
0.630
0.500
0.472
0.500
0.562
0.500
0.500
0.625
0.375
0.375
0.750
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-0996
25003-0999
25003-1000
25003-1002
25003-1004
25003-1007
25003-1010
25003-1013
25003-1014
25003-1016
25003-1017
25003-1018
25003-1019
25003-1020
25003-1022
25003-1024
25003-1025
25003-1026
25003-1027
25003-1029
25003-1030
25003-1031
25003-1032
25003-1033
25003-1034
25003-1035
25003-1036
25003-1037
25003-1038
25003-1039
25003-1041
25003-1042
25003-1049
25003-1061
25003-1064
25003-1070
25003-1072
25003-1079
25003-1082
25003-1086
25003-1087
25003-1089
25003-1090
25003-1091
25003-1095
25003-1097
25003-1098
25003-1099
25003-1103
25003-1107
25003-1108
25003-1109

3.437
8.438
3.938
5.118
6.221
4.866
3.740
15.375
8.661
12.812
7.000
14.500
9.000
4.477
3.625
4.724
4.960
10.236
10.630
3.563
10.000
11.417
16.000
3.150
3.500
11.500
9.449
10.300
19.750
2.835
3.720
1.875
10.710
7.937
9.947
10.250
9.750
9.947
8.750
2.750
3.430
5.415
8.562
66.875
8.625
9.448
25.000
9.843
12.598
7.875
12.401
9.055

4.500
9.563
5.040
6.260
7.250
5.875
4.921
17.125
9.370
14.812
7.875
15.750
10.062
6.256
4.625
6.000
5.885
12.000
12.362
4.500
10.875
12.992
17.875
3.937
4.812
13.250
10.827
11.550
21.250
3.740
4.720
2.625
12.511
9.000
11.875
11.687
10.625
10.875
10.500
3.983
4.625
6.815
9.500
68.000
9.812
11.023
26.250
11.220
14.173
9.500
14.173
10.180

0.375
0.500
0.400
0.488
0.500
0.500
0.472
0.812
0.748
0.750
0.375
0.750
0.500
0.625
0.437
0.500
0.500
0.812
0.787
0.469
0.375
0.787
0.750
0.394
0.500
0.812
0.709
0.625
0.750
0.375
0.500
0.375
0.625
0.500
0.500
0.625
0.500
0.500
0.812
0.500
0.458
0.500
0.500
0.562
0.625
0.500
0.625
0.630
0.787
0.625
0.787
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-4

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-1110
25003-1111
25003-1112
25003-1113
25003-1115
25003-1118
25003-1121
25003-1124
25003-1125
25003-1126
25003-1127
25003-1145
25003-1146
25003-1152
25003-1158
25003-1160
25003-1165
25003-1169
25003-1172
25003-1173
25003-1175
25003-1176
25003-1179
25003-1181
25003-1182
25003-1204
25003-1206
25003-1214
25003-1224
25003-1227
25003-1229
25003-1235
25003-1237
25003-1239
25003-1241
25003-1242
25003-1246
25003-1248
25003-1250
25003-1255
25003-1256
25003-1259
25003-1262
25003-1269
25003-1275
25003-1277
25003-1280
25003-1283
25003-1286
25003-1287
25003-1288
25003-1289

3.740
5.905
24.015
12.598
18.125
48.000
51.000
11.125
17.250
17.000
6.875
3.937
10.375
7.800
17.625
4.687
9.000
26.968
6.000
12.438
15.000
12.438
17.716
20.111
12.598
2.000
2.000
7.480
22.500
55.250
5.094
8.937
18.110
3.950
4.875
13.000
10.984
4.813
5.438
2.062
2.938
4.921
11.220
6.102
45.000
4.500
16.299
9.750
6.247
14.140
7.812
33.625

4.740
7.087
25.748
14.173
19.750
50.000
53.000
13.000
18.500
17.906
7.875
5.256
11.633
8.800
19.375
5.625
10.910
27.953
7.500
14.375
16.250
14.438
19.685
22.111
14.252
3.000
3.000
9.055
23.500
56.500
6.586
10.500
20.078
4.950
6.325
14.606
12.165
6.007
6.720
2.997
3.905
5.906
12.402
7.087
46.750
5.687
18.268
11.375
7.188
15.640
9.000
35.593

WIDTH
0.375
0.512
0.787
0.708
0.750
0.750
0.750
0.750
0.625
0.500
0.375
0.468
0.812
0.500
0.750
0.500
0.812
0.500
0.375
0.812
0.625
0.812
0.812
0.812
0.812
0.375
0.500
0.630
0.500
0.750
0.484
0.750
0.787
0.500
0.500
0.703
0.591
0.375
0.625
0.375
0.484
0.591
0.787
0.500
0.875
0.500
0.812
0.750
0.375
0.625
0.625
0.937

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-1290
25003-1292
25003-1293
25003-1294
25003-1295
25003-1296
25003-1298
25003-1300
25003-1303
25003-1304
25003-1305
25003-1308
25003-1310
25003-1311
25003-1312
25003-1314
25003-1316
25003-1317
25003-1335
25003-1374
25003-1376
25003-1379
25003-1388
25003-1391
25003-1392
25003-1393
25003-1394
25003-1395
25003-1397
25003-1430
25003-1433
25003-1439
25003-1440
25003-1441
25003-1444
25003-1445
25003-1448
25003-1449
25003-1453
25003-1454
25003-1457
25003-1459
25003-1461
25003-1463
25003-1464
25003-1465
25003-1480
25003-1482
25003-1492
25003-1493
25003-1494
25003-1515

7.480
10.236
15.375
23.900
8.062
3.500
19.291
6.030
4.724
12.500
22.500
7.375
12.000
22.875
26.875
9.842
7.480
3.900
2.125
5.906
19.500
7.480
6.890
6.298
8.661
6.062
6.299
6.693
4.921
9.250
7.087
15.937
3.437
9.875
3.500
13.750
3.938
15.438
55.125
14.875
6.250
17.000
10.125
8.437
7.125
11.031
2.250
2.250
2.250
2.250
2.250
3.625

8.425
12.125
16.250
25.100
9.000
4.437
21.260
7.324
6.101
14.375
23.375
8.500
12.875
23.750
27.750
11.842
8.980
5.200
3.125
7.906
21.500
8.661
8.465
7.500
10.236
7.500
7.244
7.638
6.299
10.170
7.961
17.437
4.500
11.375
4.475
15.375
5.000
16.938
58.000
16.875
7.375
18.500
11.625
9.937
8.625
12.031
3.125
3.125
3.250
3.250
3.250
4.609

WIDTH
0.472
0.787
0.437
0.750
0.500
0.500
0.787
0.615
0.500
0.750
0.375
0.500
0.375
0.375
0.375
0.750
0.750
0.500
0.500
0.500
0.625
0.630
0.625
0.375
0.787
0.750
0.551
0.551
0.709
0.500
0.472
0.750
0.437
0.625
0.500
0.750
0.400
0.750
0.750
0.375
0.625
0.720
0.500
0.500
0.437
0.500
0.375
0.500
0.375
0.438
0.500
0.492

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-5

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-1586
25003-1589
25003-1590
25003-1592
25003-1608
25003-1609
25003-1610
25003-1616
25003-1617
25003-1619
25003-1622
25003-1623
25003-1625
25003-1628
25003-1631
25003-1632
25003-1634
25003-1635
25003-1642
25003-1657
25003-1664
25003-1682
25003-1688
25003-1689
25003-1690
25003-1691
25003-1694
25003-1695
25003-1697
25003-1698
25003-1699
25003-1701
25003-1702
25003-1703
25003-1706
25003-1707
25003-1709
25003-1710
25003-1712
25003-1713
25003-1717
25003-1718
25003-1719
25003-1721
25003-1728
25003-1730
25003-1733
25003-1734
25003-1735
25003-1736
25003-1746
25003-1749

3.250
3.250
3.228
8.437
15.354
6.250
3.906
7.087
14.750
12.875
40.533
10.750
4.500
3.312
14.484
14.484
42.992
5.250
2.375
2.375
4.500
5.500
15.161
6.000
7.480
12.500
8.750
32.687
75.000
13.000
8.376
32.835
6.440
9.843
6.063
4.882
6.889
12.250
12.598
3.750
6.299
5.511
25.197
8.375
36.500
34.000
57.000
7.187
2.438
2.437
3.938
2.438

4.225
4.312
4.488
9.937
16.535
7.375
5.000
8.071
16.500
14.000
42.283
12.687
5.688
4.250
16.312
15.369
44.492
6.313
3.125
3.350
5.750
6.375
16.885
7.187
8.729
14.062
9.764
33.937
76.500
14.375
9.565
33.937
7.969
11.342
7.087
6.299
7.874
14.125
14.173
4.732
7.874
6.693
27.165
9.500
39.000
36.500
59.000
8.437
3.250
3.312
4.906
3.500

0.375
0.500
0.500
0.750
0.551
0.562
0.500
0.512
0.812
0.750
0.875
0.578
0.625
0.500
0.562
0.500
0.750
0.500
0.375
0.375
0.438
0.500
0.812
0.750
0.625
0.625
0.375
0.500
0.750
0.375
0.750
0.500
0.750
0.748
0.413
0.413
0.472
0.750
0.748
0.405
0.472
0.472
0.807
0.750
0.750
0.750
0.827
0.500
0.375
0.375
0.484
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-1766
25003-1767
25003-1768
25003-1769
25003-1770
25003-1772
25003-1773
25003-1777
25003-1778
25003-1779
25003-1780
25003-1781
25003-1782
25003-1804
25003-1807
25003-1819
25003-1820
25003-1821
25003-1832
25003-1844
25003-1865
25003-1866
25003-1868
25003-1869
25003-1872
25003-1875
25003-1876
25003-1877
25003-1881
25003-1883
25003-1885
25003-1889
25003-1894
25003-1895
25003-1901
25003-1905
25003-1906
25003-1907
25003-1908
25003-1910
25003-1911
25003-1913
25003-1918
25003-1919
25003-1923
25003-1925
25003-1928
25003-1939
25003-1941
25003-1942
25003-1949
25003-1953

3.938
15.354
3.465
13.125
8.000
3.464
19.625
5.438
3.250
5.161
19.625
12.125
11.188
2.500
2.500
2.500
2.500
2.500
6.500
2.625
14.041
19.687
7.250
6.889
57.000
3.937
9.125
38.000
10.000
14.028
2.562
13.000
2.562
3.062
3.681
11.000
3.438
49.500
10.125
9.500
20.866
14.000
15.250
26.000
17.000
12.000
4.062
2.625
2.625
2.625
7.874
8.464

4.906
17.086
4.729
15.000
9.450
4.331
21.375
6.750
4.543
6.475
21.125
13.125
13.000
3.246
3.250
3.500
3.500
3.500
7.500
3.625
15.541
21.673
8.702
7.889
59.000
4.921
10.500
40.000
11.875
15.428
3.500
14.608
3.751
4.125
4.681
13.000
4.600
51.325
11.500
11.500
22.835
15.625
16.250
27.125
18.250
13.000
5.000
3.500
3.500
3.543
8.858
9.646

0.484
0.787
0.500
0.750
0.625
0.500
0.750
0.750
0.500
0.500
0.500
0.500
0.750
0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.625
0.812
0.609
0.500
0.812
0.492
0.625
1.000
0.812
0.750
0.375
0.750
0.375
0.437
0.500
0.500
0.500
0.850
0.625
0.500
0.787
0.812
0.500
0.562
0.750
0.625
0.375
0.375
0.500
0.375
0.591
0.492

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-6

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-1957
25003-1958
25003-1960
25003-1961
25003-1962
25003-1963
25003-1965
25003-1968
25003-1970
25003-1971
25003-1973
25003-1974
25003-1976
25003-1977
25003-1979
25003-1980
25003-1982
25003-1983
25003-1984
25003-1985
25003-1986
25003-1988
25003-1989
25003-1991
25003-1992
25003-1997
25003-1998
25003-2000
25003-2013
25003-2016
25003-2018
25003-2019
25003-2021
25003-2022
25003-2024
25003-2026
25003-2030
25003-2035
25003-2044
25003-2054
25003-2057
25003-2058
25003-2064
25003-2065
25003-2066
25003-2067
25003-2068
25003-2069
25003-2079
25003-2081
25003-2090
25003-2095

39.000
2.625
12.875
5.500
11.024
9.000
7.438
14.567
6.496
10.500
12.375
29.968
17.000
24.375
3.937
10.500
10.875
41.125
12.500
30.313
3.228
3.562
12.579
19.674
15.750
25.625
3.150
4.134
2.687
3.750
17.500
5.512
17.500
5.305
4.910
14.580
2.750
2.750
2.750
2.750
2.750
21.250
7.010
7.256
14.173
14.750
10.000
15.748
29.528
7.283
2.812
3.681

41.500
3.625
13.875
6.875
12.520
10.500
8.500
16.535
7.874
12.500
13.705
31.968
18.000
25.625
5.118
11.906
12.875
43.125
13.375
31.813
4.102
4.562
14.000
21.674
16.948
26.875
4.331
5.118
3.881
5.062
18.906
6.496
18.750
6.305
5.910
16.200
4.000
3.500
3.751
3.625
3.750
23.250
8.510
8.756
15.354
16.125
11.000
17.717
32.047
8.283
3.876
5.000

WIDTH
0.750
0.375
0.500
0.562
0.709
0.562
0.500
0.787
0.591
0.500
0.375
0.812
0.500
0.625
0.472
0.766
0.500
1.000
0.500
0.750
0.375
0.375
0.750
0.812
0.750
0.625
0.500
0.500
0.468
0.375
0.766
0.492
0.500
0.500
0.500
0.625
0.500
0.375
0.375
0.438
0.375
0.750
0.500
0.500
0.709
0.750
0.375
0.787
0.750
0.500
0.437
0.500

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-2105
25003-2106
25003-2108
25003-2109
25003-2110
25003-2111
25003-2115
25003-2118
25003-2121
25003-2137
25003-2140
25003-2144
25003-2146
25003-2149
25003-2152
25003-2153
25003-2156
25003-2158
25003-2159
25003-2168
25003-2171
25003-2173
25003-2174
25003-2176
25003-2177
25003-2183
25003-2185
25003-2186
25003-2193
25003-2196
25003-2200
25003-2201
25003-2205
25003-2206
25003-2214
25003-2225
25003-2228
25003-2231
25003-2233
25003-2234
25003-2244
25003-2245
25003-2247
25003-2248
25003-2249
25003-2252
25003-2255
25003-2256
25003-2259
25003-2265
25003-2269
25003-2270

2.953
7.625
3.062
13.780
2.875
2.875
2.875
2.875
2.875
3.346
2.937
72.500
2.938
2.937
2.938
2.937
7.812
28.625
5.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
12.750
3.000
18.000
24.640
3.063
3.063
68.000
15.512
3.346
3.125
3.125
3.125
5.906
3.125
8.875
13.386
8.858
26.378
3.187
3.187
3.188
9.646
3.897
40.265
6.375
3.250

4.213
8.500
4.000
15.512
3.625
3.625
3.623
3.750
3.875
4.331
3.937
74.000
3.750
3.876
4.003
4.003
9.250
30.625
6.750
3.751
3.876
3.875
4.003
4.003
4.125
4.375
14.250
4.500
19.438
25.640
4.063
4.125
70.000
16.535
4.331
4.125
4.249
4.375
7.480
4.500
10.250
15.118
10.433
27.874
4.249
4.375
4.500
11.142
4.876
41.765
7.250
4.249

WIDTH
0.492
0.500
0.500
0.500
0.375
0.438
0.375
0.375
0.375
0.492
0.500
0.750
0.375
0.375
0.375
0.437
0.500
0.812
0.687
0.375
0.375
0.500
0.375
0.500
0.500
0.500
0.812
0.500
0.500
0.500
0.500
0.500
1.000
0.500
0.472
0.500
0.500
0.500
0.591
0.500
0.750
0.787
0.630
0.748
0.500
0.500
0.500
0.812
0.500
0.750
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-7

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-2272
25003-2273
25003-2274
25003-2275
25003-2276
25003-2279
25003-2282
25003-2286
25003-2293
25003-2294
25003-2297
25003-2300
25003-2301
25003-2308
25003-2313
25003-2314
25003-2319
25003-2321
25003-2322
25003-2324
25003-2327
25003-2328
25003-2330
25003-2331
25003-2333
25003-2337
25003-2341
25003-2343
25003-2344
25003-2345
25003-2348
25003-2350
25003-2352
25003-2355
25003-2358
25003-2364
25003-2366
25003-2372
25003-2376
25003-2383
25003-2385
25003-2389
25003-2391
25003-2393
25003-2395
25003-2396
25003-2406
25003-2409
25003-2415
25003-2417
25003-2420
25003-2423

3.250
3.250
5.125
15.748
3.250
3.250
3.250
13.386
4.921
3.916
3.312
3.313
3.312
53.185
27.500
10.236
12.750
3.375
20.000
3.375
3.375
14.961
3.375
2.953
3.375
18.750
5.905
9.625
10.000
3.438
3.437
10.827
10.000
4.187
3.125
3.500
3.500
3.500
10.500
13.500
3.238
15.748
7.750
3.562
12.125
3.562
3.562
5.500
3.625
3.625
3.625
3.625

4.250
4.375
6.000
17.717
4.500
4.625
4.750
15.157
6.299
5.234
4.375
4.500
4.500
54.190
29.500
12.244
14.482
4.375
20.938
4.500
4.625
16.535
4.750
4.213
4.875
20.250
7.087
11.000
11.640
4.500
4.625
12.205
11.375
5.312
4.500
4.375
4.500
4.750
11.500
14.919
4.180
17.716
9.000
4.625
13.375
4.750
4.438
6.750
5.000
4.625
4.750
4.875

0.625
0.500
0.500
0.812
0.500
0.500
0.500
0.787
0.512
0.500
0.500
0.500
0.468
0.812
0.750
0.748
0.787
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.630
0.750
0.750
0.500
0.500
0.591
0.500
0.500
0.438
0.375
0.500
0.500
0.375
0.700
0.500
0.709
0.750
0.500
0.750
0.500
0.438
0.575
0.500
0.500
0.500
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-2426
25003-2429
25003-2439
25003-2441
25003-2444
25003-2447
25003-2450
25003-2454
25003-2457
25003-2458
25003-2462
25003-2465
25003-2468
25003-2471
25003-2472
25003-2474
25003-2475
25003-2477
25003-2483
25003-2484
25003-2485
25003-2486
25003-2491
25003-2493
25003-2495
25003-2496
25003-2497
25003-2499
25003-2500
25003-2501
25003-2505
25003-2507
25003-2509
25003-2510
25003-2513
25003-2518
25003-2519
25003-2523
25003-2522
25003-2525
25003-2530
25003-2533
25003-2537
25003-2540
25003-2543
25003-2546
25003-2548
25003-2549
25003-2553
25003-2554
25003-2557
25003-2560

3.625
3.625
19.688
3.687
3.687
3.687
3.687
12.205
6.890
10.357
3.750
3.750
3.750
3.750
12.250
3.750
61.417
44.094
3.812
19.685
9.055
3.812
16.187
3.938
3.812
4.803
12.750
17.400
7.874
3.875
20.000
3.875
25.000
3.875
3.875
4.987
3.937
3.938
3.937
3.937
9.500
4.016
4.000
4.000
4.000
4.000
3.938
4.000
4.000
4.000
4.000
6.062

4.999
5.125
21.688
4.750
4.875
4.999
5.125
13.937
8.071
11.500
4.750
4.875
4.999
5.125
14.000
5.250
63.417
46.063
4.875
21.457
10.180
4.999
17.437
4.999
5.375
5.906
14.750
19.400
9.374
4.875
21.250
5.125
26.875
5.250
5.375
6.000
4.999
4.938
5.125
5.250
10.937
5.438
4.999
5.125
5.250
5.375
5.125
5.500
5.500
4.875
4.937
7.062

0.500
0.500
0.812
0.500
0.500
0.500
0.500
0.787
0.591
0.625
0.500
0.500
0.500
0.500
0.625
0.500
0.812
0.812
0.500
0.787
0.494
0.500
0.750
0.438
0.500
0.500
0.812
0.812
0.752
0.500
0.625
0.500
0.750
0.500
0.500
0.500
0.500
0.438
0.500
0.500
0.750
0.500
0.500
0.500
0.500
0.500
0.468
0.500
0.438
0.500
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-8

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-2565
25003-2570
25003-2572
25003-2573
25003-2575
25003-2578
25003-2579
25003-2580
25003-2581
25003-2582
25003-2598
25003-2600
25003-2603
25003-2606
25003-2608
25003-2609
25003-2612
25003-2613
25003-2614
25003-2615
25003-2617
25003-2619
25003-2620
25003-2621
25003-2622
25003-2623
25003-2624
25003-2625
25003-2626
25003-2628
25003-2630
25003-2632
25003-2633
25003-2634
25003-2636
25003-2640
25003-2641
25003-2642
25003-2643
25003-2644
25003-2646
25003-2647
25003-2652
25003-2653
25003-2655
25003-2657
25003-2658
25003-2660
25003-2663
25003-2666
25003-2669
25003-2674

3.000
4.062
5.315
4.062
7.937
4.250
4.062
9.375
7.480
11.024
8.214
4.125
4.125
4.125
4.125
4.125
4.125
10.433
7.625
8.750
2.562
15.625
19.625
4.125
3.938
55.906
5.500
16.535
4.331
26.750
4.187
3.187
4.187
4.724
4.188
16.530
4.188
4.187
7.283
4.188
11.500
8.250
20.375
20.500
10.438
4.250
4.250
4.250
4.250
4.250
4.250
23.228

4.000
5.125
6.693
5.250
9.250
5.062
5.500
11.250
8.465
12.205
9.464
5.125
5.250
5.375
5.375
5.500
5.625
11.417
9.188
10.312
3.439
17.625
21.080
6.000
4.950
57.874
6.375
17.913
5.315
28.562
5.250
4.447
5.375
5.708
5.500
17.854
5.188
5.750
8.464
5.250
13.125
9.688
22.188
22.000
12.000
5.250
5.250
5.375
5.500
5.625
5.750
25.197

WIDTH
0.406
0.500
0.500
0.500
0.625
0.375
0.500
0.750
0.500
0.630
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.625
0.625
0.375
0.812
0.500
0.500
0.500
0.812
0.437
0.787
0.500
0.812
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.590
0.469
0.812
0.750
0.812
0.625
0.625
0.500
0.562
0.500
0.500
0.500
0.500
0.787

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-2679
25003-2680
25003-2683
25003-2684
25003-2685
25003-2687
25003-2688
25003-2689
25003-2690
25003-2691
25003-2693
25003-2696
25003-2697
25003-2700
25003-2703
25003-2704
25003-2707
25003-2708
25003-2709
25003-2711
25003-2714
25003-2717
25003-2719
25003-2720
25003-2721
25003-2724
25003-2727
25003-2728
25003-2732
25003-2735
25003-2738
25003-2741
25003-2744
25003-2745
25003-2750
25003-2753
25003-2756
25003-2759
25003-2762
25003-2763
25003-2764
25003-2765
25003-2769
25003-2773
25003-2774
25003-2775
25003-2777
25003-2780
25003-2781
25003-2786
25003-2790
25003-2791

7.480
6.000
17.000
4.312
3.125
4.313
7.600
4.312
4.312
4.313
4.312
4.313
18.449
14.394
50.000
11.750
26.625
4.375
25.375
4.375
4.375
4.375
4.625
4.375
8.970
4.375
8.375
19.250
4.438
4.438
4.437
18.000
4.438
4.437
4.438
4.500
4.500
4.500
4.500
4.500
29.000
4.500
25.203
33.858
4.500
21.000
4.562
4.563
16.500
4.562
4.494
10.688

8.480
7.125
18.500
5.375
4.188
5.500
8.894
5.500
5.625
5.501
5.750
5.313
19.449
15.394
52.250
13.562
28.125
5.375
26.875
5.500
5.625
5.750
6.095
5.875
10.500
6.000
9.875
20.250
5.500
5.625
5.750
19.500
6.000
6.000
6.250
5.500
5.625
5.750
5.875
5.750
31.000
6.000
27.171
35.858
6.375
22.760
5.625
5.750
17.875
6.000
5.925
12.250

WIDTH
0.500
0.437
0.625
0.500
0.500
0.500
0.750
0.625
0.500
0.438
0.500
0.438
0.500
0.500
0.750
0.500
0.750
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.375
0.500
0.500
0.500
0.500
0.750
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.375
1.000
0.500
0.812
0.813
0.500
0.750
0.500
0.500
0.750
0.500
0.500
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-9

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-2792
25003-2793
25003-2794
25003-2796
25003-2798
25003-2801
25003-2804
25003-2807
25003-2808
25003-2810
25003-2813
25003-2816
25003-2819
25003-2822
25003-2826
25003-2828
25003-2829
25003-2833
25003-2837
25003-2840
25003-2843
25003-2846
25003-2849
25003-2855
25003-2858
25003-2861
25003-2866
25003-2870
25003-2873
25003-2875
25003-2876
25003-2878
25003-2879
25003-2880
25003-2882
25003-2887
25003-2890
25003-2893
25003-2894
25003-2896
25003-2897
25003-2900
25003-2903
25003-2904
25003-2907
25003-2910
25003-2911
25003-2915
25003-2918
25003-2919
25003-2921
25003-2922

4.562
5.938
32.156
28.740
4.625
4.625
4.625
4.625
16.110
4.625
4.625
4.438
4.687
4.687
6.693
7.087
8.661
8.268
4.750
4.750
4.750
4.750
4.750
4.812
4.812
4.812
7.480
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.921
6.063
4.938
4.937
4.937
4.938
4.938
4.938
4.937
29.750
4.938
12.598
5.000
5.000
5.000
5.000
5.000

6.250
7.438
34.250
31.260
5.625
5.750
5.875
6.000
18.110
6.125
6.250
5.875
5.750
5.875
7.874
8.268
9.843
9.449
5.750
5.875
6.000
6.125
6.250
5.875
6.000
6.125
8.677
5.875
6.000
6.000
6.125
6.125
6.250
6.250
6.375
5.906
7.063
5.938
6.000
6.000
6.125
6.250
6.375
6.375
31.750
5.875
14.330
6.000
6.125
6.125
6.250
6.250

0.500
0.500
0.750
0.748
0.500
0.500
0.500
0.500
0.787
0.500
0.500
0.500
0.500
0.500
0.472
0.472
0.472
0.472
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.625
0.500
0.562
0.500
0.472
0.390
0.438
0.500
0.625
0.500
0.500
0.500
0.562
0.875
0.500
0.787
0.500
0.500
0.563
0.500
0.562

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-2923
25003-2924
25003-2926
25003-2927
25003-2928
25003-2943
25003-2944
25003-2946
25003-2949
25003-2954
25003-2965
25003-2966
25003-2968
25003-2970
25003-2973
25003-2974
25003-2976
25003-2977
25003-2980
25003-2983
25003-2984
25003-2985
25003-2988
25003-2990
25003-2993
25003-2994
25003-2996
25003-2997
25003-2998
25003-2999
25003-3001
25003-3007
25003-3012
25003-3026
25003-3029
25003-3032
25003-3057
25003-3059
25003-3062
25003-3065
25003-3067
25003-3068
25003-3071
25003-3073
25003-3083
25003-3088
25003-3090
25003-3091
25003-3092
25003-3093
25003-3094
25003-3095

5.000
5.000
5.000
5.000
5.000
3.437
16.625
2.938
4.291
5.062
3.438
2.953
11.250
8.250
5.000
5.000
8.471
4.938
13.750
6.750
4.435
4.000
5.118
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
8.375
4.309
5.187
5.188
5.187
20.000
5.250
5.250
5.250
5.250
5.250
5.250
5.250
33.000
20.939
5.302
15.000
5.313
12.205
7.000
5.312

6.250
6.375
6.375
6.500
6.500
4.875
18.500
4.064
5.394
6.125
4.460
3.937
12.530
9.312
6.437
5.875
9.850
5.750
15.250
8.000
5.594
5.625
6.299
6.125
6.250
6.250
6.375
6.375
6.375
6.500
6.500
9.750
5.348
6.250
6.375
6.500
21.500
6.250
6.375
6.500
6.500
6.625
6.750
6.750
35.000
22.939
6.302
16.375
6.375
13.780
8.187
6.500

0.625
0.500
0.625
0.500
0.562
0.437
0.750
0.500
0.500
0.500
0.500
0.375
0.625
0.437
0.500
0.500
0.630
0.500
0.500
0.375
0.500
0.375
0.591
0.500
0.500
0.562
0.500
0.562
0.625
0.500
0.625
0.625
0.375
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.750
0.812
0.500
0.531
0.500
0.709
0.625
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-10

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-3096
25003-3098
25003-3105
25003-3109
25003-3110
25003-3112
25003-3114
25003-3117
25003-3118
25003-3122
25003-3125
25003-3126
25003-3127
25003-3128
25003-3129
25003-3130
25003-3131
25003-3132
25003-3134
25003-3137
25003-3138
25003-3140
25003-3141
25003-3143
25003-3144
25003-3146
25003-3147
25003-3148
25003-3149
25003-3150
25003-3152
25003-3154
25003-3155
25003-3157
25003-3159
25003-3160
25003-3163
25003-3165
25003-3168
25003-3169
25003-3170
25003-3171
25003-3172
25003-3176
25003-3179
25003-3180
25003-3182
25003-3184
25003-3185
25003-3188
25003-3190
25003-3195

3.820
5.312
9.500
7.059
9.945
8.464
13.469
8.500
5.315
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
9.448
5.375
12.250
69.125
53.000
26.220
4.875
5.438
10.000
75.000
5.512
14.750
10.438
5.438
11.150
5.437
5.437
4.375
9.000
5.225
29.527
6.500
29.527
12.992
5.897
3.125
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
9.125

5.042
6.625
10.875
8.249
11.560
9.339
14.680
10.062
6.693
6.375
6.500
6.500
6.500
6.625
6.625
6.625
6.750
11.417
6.875
13.875
71.125
54.882
27.220
6.062
6.875
11.250
77.000
7.087
16.625
11.688
6.625
12.375
6.750
6.750
5.250
10.672
6.513
31.496
7.375
31.496
14.724
7.147
4.008
6.500
6.625
6.625
6.750
6.750
6.875
7.000
7.000
10.125

WIDTH
0.375
0.500
0.750
0.625
0.750
0.437
0.500
0.750
0.591
0.500
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.630
0.500
0.625
0.812
0.881
0.500
0.500
0.750
0.687
1.000
0.625
0.812
0.812
0.500
0.625
0.500
0.625
0.375
0.750
0.625
0.787
0.500
0.905
0.748
0.625
0.375
0.500
0.500
0.562
0.500
0.625
0.500
0.500
0.625
0.375

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-3196
25003-3197
25003-3198
25003-3199
25003-3203
25003-3204
25003-3207
25003-3209
25003-3212
25003-3216
25003-3217
25003-3220
25003-3222
25003-3223
25003-3224
25003-3228
25003-3229
25003-3231
25003-3233
25003-3234
25003-3236
25003-3239
25003-3240
25003-3241
25003-3247
25003-3248
25003-3250
25003-3251
25003-3253
25003-3255
25003-3256
25003-3257
25003-3258
25003-3261
25003-3262
25003-3269
25003-3275
25003-3276
25003-3278
25003-3279
25003-3280
25003-3281
25003-3282
25003-3283
25003-3284
25003-3287
25003-3288
25003-3293
25003-3298
25003-3303
25003-3308
25003-3316

6.000
5.708
10.250
8.000
5.562
5.512
2.431
12.795
5.500
6.875
7.750
22.958
15.108
16.750
12.750
5.625
3.938
5.625
5.625
5.625
5.625
11.750
5.625
6.750
17.000
3.937
14.370
6.889
5.687
9.250
3.750
7.000
5.688
11.063
14.810
6.299
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
8.125
5.875
5.813
5.875

7.406
7.086
11.500
9.250
6.625
6.890
3.400
14.370
6.625
8.062
8.812
24.958
16.750
18.000
14.000
6.625
5.118
6.750
6.750
6.875
6.875
13.000
7.125
8.500
18.250
4.921
15.866
7.874
6.750
10.375
5.250
8.000
6.750
12.313
15.685
7.274
6.750
6.750
6.875
6.875
6.875
7.000
7.000
7.000
7.125
7.250
7.500
7.500
9.250
6.750
7.250
6.875

WIDTH
0.588
0.630
0.500
0.437
0.500
0.709
0.500
0.630
0.406
0.563
0.500
0.812
0.750
0.750
0.500
0.500
0.375
0.500
0.625
0.500
0.625
0.813
0.500
0.500
0.500
0.500
0.748
0.500
0.500
0.625
0.438
0.375
0.625
0.625
0.375
0.750
0.500
0.438
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.500
0.562
0.500
0.625
0.625
0.625
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-11

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-3319
25003-3324
25003-3325
25003-3327
25003-3328
25003-3330
25003-3332
25003-3335
25003-3343
25003-3344
25003-3351
25003-3355
25003-3357
25003-3359
25003-3360
25003-3361
25003-3363
25003-3364
25003-3367
25003-3369
25003-3370
25003-3375
25003-3376
25003-3378
25003-3380
25003-3381
25003-3383
25003-3387
25003-3388
25003-3390
25003-3391
25003-3394
25003-3395
25003-3396
25003-3398
25003-3402
25003-3404
25003-3405
25003-3406
25003-3409
25003-3413
25003-3415
25003-3417
25003-3419
25003-3421
25003-3423
25003-3424
25003-3425
25003-3426
25003-3428
25003-3430
25003-3431

5.875
5.875
5.875
5.906
5.875
5.875
5.875
5.937
5.938
5.938
5.938
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.125
6.063
6.125
6.125
6.125
6.125
6.125
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.438
6.500
6.500
6.500
6.500

7.000
7.125
7.250
7.087
7.375
7.375
7.500
7.000
7.250
7.375
7.625
7.000
7.000
7.125
7.125
7.250
7.250
7.375
7.500
7.500
7.500
7.125
7.063
7.250
7.250
7.375
7.375
7.500
7.250
7.250
7.375
7.500
7.500
7.500
7.625
7.750
7.750
7.750
7.375
7.500
7.625
7.625
7.750
7.500
7.875
7.875
7.875
7.750
7.500
7.625
7.750
7.750

0.500
0.625
0.500
0.591
0.500
0.625
0.563
0.500
0.625
0.500
0.500
0.500
0.625
0.562
0.625
0.500
0.625
0.500
0.500
0.625
0.750
0.500
0.438
0.500
0.625
0.500
0.625
0.750
0.500
0.625
0.500
0.500
0.562
0.625
0.500
0.500
0.625
0.750
0.500
0.500
0.500
0.625
0.500
0.625
0.500
0.625
0.750
0.750
0.625
0.625
0.625
0.750

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-3432
25003-3434
25003-3435
25003-3436
25003-3438
25003-3440
25003-3442
25003-3444
25003-3445
25003-3455
25003-3456
25003-3458
25003-3459
25003-3460
25003-3462
25003-3464
25003-3465
25003-3476
25003-3477
25003-3478
25003-3480
25003-3481
25003-3482
25003-3483
25003-3490
25003-3492
25003-3494
25003-3495
25003-3496
25003-3497
25003-3498
25003-3499
25003-3500
25003-3501
25003-3502
25003-3506
25003-3508
25003-3510
25003-3512
25003-3515
25003-3518
25003-3521
25003-3522
25003-3523
25003-3524
25003-3525
25003-3526
25003-3527
25003-3528
25003-3530
25003-3532
25003-3533

6.500
6.500
6.500
6.625
6.625
6.625
6.625
6.625
6.625
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.937
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.125
7.125
7.125
7.125
7.125
7.250
7.188
7.250
7.250
7.250
7.250
7.250
7.250
7.375
7.375
7.375
7.375

7.875
8.000
8.000
7.625
7.750
7.875
8.000
8.125
8.125
7.750
7.750
7.875
7.875
8.000
8.125
8.250
8.250
8.000
7.875
8.125
8.250
8.250
8.375
8.375
8.125
8.000
8.125
8.125
8.250
8.250
8.375
8.375
8.500
8.500
8.000
8.125
8.250
8.375
8.500
8.625
8.250
8.437
8.500
8.500
8.625
8.625
8.750
8.750
8.375
8.500
8.625
8.625

0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.438
0.625
0.625
0.375
0.625
0.625
0.625
0.750
0.625
0.438
0.625
0.625
0.750
0.625
0.750
0.750
0.625
0.625
0.750
0.625
0.750
0.625
0.750
0.625
0.750
0.438
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-12

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-3536
25003-3537
25003-3538
25003-3544
25003-3546
25003-3548
25003-3552
25003-3553
25003-3554
25003-3558
25003-3562
25003-3564
25003-3566
25003-3567
25003-3570
25003-3573
25003-3574
25003-3576
25003-3578
25003-3579
25003-3580
25003-3581
25003-3584
25003-3586
25003-3587
25003-3588
25003-3589
25003-3590
25003-3592
25003-3594
25003-3595
25003-3596
25003-3597
25003-3598
25003-3600
25003-3601
25003-3604
25003-3606
25003-3608
25003-3611
25003-3616
25003-3619
25003-3620
25003-3621
25003-3622
25003-3623
25003-3632
25003-3636
25003-3638
25003-3640
25003-3642
25003-3645

7.375
7.375
7.375
7.500
7.500
7.500
7.500
7.500
7.500
7.625
7.625
7.625
7.625
7.625
7.750
7.750
7.750
7.750
7.750
7.750
7.875
7.812
7.875
7.875
7.875
7.875
7.875
7.937
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.250
8.250
8.375
8.625
9.000
9.000
9.000
9.000
9.000
9.000
9.250
9.437
9.500
9.500
9.500
9.500

BORE
8.875
8.875
9.000
8.500
8.625
8.750
9.000
9.000
9.125
8.625
8.875
9.000
9.125
9.125
8.750
8.875
9.000
9.125
9.250
9.250
8.875
8.812
9.125
9.250
9.250
9.375
9.375
9.125
9.000
9.125
9.125
9.250
9.250
9.375
9.500
9.500
9.250
9.500
9.750
10.625
10.125
10.500
10.625
10.750
10.875
11.000
10.750
10.625
10.500
10.750
11.000
11.375

WIDTH
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.750
0.625
0.438
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.750
0.625
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.625
0.625
0.625
0.625

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-3646
25003-3652
25003-3654
25003-3660
25003-3661
25003-3662
25003-3666
25003-3672
25003-3676
25003-3682
25003-3685
25003-3686
25003-3687
25003-3691
25003-3692
25003-3693
25003-3695
25003-3696
25003-3701
25003-3712
25003-3728
25003-3741
25003-3760
25003-3773
25003-3779
25003-3796
25003-3813
25003-3818
25003-3830
25003-3832
25003-3853
25003-3868
25003-3885
25003-3911
25003-3913
25003-3914
25003-3917
25003-2920
25003-3921
25003-3928
25003-3930
25003-3933
25003-3934
25003-3935
25003-3937
25003-3938
25003-3940
25003-3941
25003-3942
25003-3947
25003-3948
25003-3949

9.500
9.750
9.750
10.000
10.000
10.000
10.000
10.000
10.250
10.750
10.750
10.750
10.750
11.000
11.000
11.000
11.062
11.063
12.000
12.500
14.500
18.000
21.125
19.000
19.500
30.000
32.500
8.250
34.500
8.875
12.000
16.500
1.750
7.480
6.299
7.874
6.438
7.087
8.000
8.125
7.971
8.375
8.375
8.500
8.500
8.500
8.625
8.625
8.661
8.750
8.750
8.750

11.500
11.000
11.250
11.000
11.125
11.250
11.750
11.500
12.250
11.750
12.250
12.500
12.750
12.000
12.250
12.500
12.250
12.500
13.750
13.500
16.500
19.500
22.125
21.500
21.000
32.000
34.500
9.500
36.500
10.125
14.000
17.750
3.189
8.858
7.480
9.055
7.500
8.268
9.500
9.625
9.000
9.875
9.875
9.500
10.000
10.500
10.125
10.250
9.842
10.250
10.375
10.500

WIDTH
0.625
0.750
0.750
0.562
0.563
0.562
0.562
0.750
0.750
0.562
0.562
0.562
0.562
0.625
0.625
0.625
0.750
0.750
0.688
0.625
0.750
0.750
0.500
0.875
0.750
1.000
1.000
0.750
1.000
0.625
0.625
0.750
0.500
0.629
0.629
0.551
0.500
0.630
0.687
0.750
0.375
0.687
0.750
0.625
0.750
0.812
0.750
0.750
0.630
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-13

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-3951
25003-3952
25003-3953
25003-3955
25003-3958
25003-3959
25003-3965
25003-3966
25003-3967
25003-3971
25003-3972
25003-3973
25003-3977
25003-3979
25003-3981
25003-3983
25003-3984
25003-3985
25003-3989
25003-3990
25003-3991
25003-3992
25003-3993
25003-3994
25003-3995
25003-3996
25003-3997
25003-4000
25003-4003
25003-4005
25003-4007
25003-4009
25003-4011
25003-4012
25003-4013
25003-4014
25003-4016
25003-4017
25003-4018
25003-4019
25003-4020
25003-4024
25003-4030
25003-4031
25003-4032
25003-4036
25003-4046
25003-4047
25003-4049
25003-4050
25003-4051
25003-4057

8.750
8.750
8.875
9.000
9.125
9.125
9.250
7.985
9.250
9.375
9.375
9.449
9.437
9.500
9.500
9.500
9.500
9.750
9.750
9.875
9.875
10.000
10.000
10.000
10.000
10.000
10.000
10.125
10.125
10.250
10.250
10.250
10.500
10.500
10.500
10.500
10.500
10.500
10.625
10.625
10.625
10.750
10.750
10.750
10.875
11.000
11.250
11.250
11.125
11.375
11.375
11.500

10.750
10.750
10.875
11.000
10.625
10.750
11.000
9.000
11.250
10.875
11.000
11.024
10.500
11.000
11.250
11.500
11.500
11.250
11.750
11.375
11.500
11.500
11.625
11.750
12.000
12.000
12.000
11.625
12.000
11.750
12.000
12.250
12.000
12.000
12.125
12.250
12.500
12.500
12.125
12.250
12.375
12.250
12.750
12.750
12.375
13.000
12.750
13.250
13.125
12.875
13.000
13.000

0.750
0.812
0.812
0.812
0.750
0.750
0.750
0.375
0.750
0.750
0.750
0.748
0.625
0.750
0.750
0.750
0.812
0.688
0.750
0.750
0.750
0.688
0.750
0.750
0.625
0.750
0.812
0.750
0.750
0.750
0.750
0.812
0.688
0.750
0.750
0.750
0.750
0.812
0.750
0.750
0.750
0.750
0.750
0.812
0.750
0.812
0.750
0.812
0.812
0.750
0.750
0.688

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-4058
25003-4060
25003-4061
25003-4062
25003-4063
25003-4064
25003-4065
25003-4067
25003-4068
25003-4071
25003-4072
25003-4074
25003-4075
25003-4077
25003-4079
25003-4080
25003-4082
25003-4083
25003-4086
25003-4088
25003-4089
25003-4093
25003-4094
25003-4095
25003-4098
25003-4099
25003-4102
25003-4103
25003-4121
25003-4122
25003-4127
25003-4128
25003-4129
25003-4131
25003-4132
25003-4133
25003-4134
25003-4135
25003-4137
25003-4138
25003-4140
25003-4142
25003-4143
25003-4145
25003-4147
25003-4148
25003-4149
25003-4151
25003-4152
25003-4153
25003-4155
25003-4156

11.500
11.500
11.500
11.500
11.500
11.750
11.750
12.000
12.000
12.000
12.000
12.250
12.250
12.375
12.500
12.500
12.500
12.500
12.625
12.750
12.750
13.000
13.000
13.000
13.000
13.000
13.250
13.250
13.500
13.500
13.500
13.500
13.750
14.000
14.000
14.000
14.000
14.000
13.875
14.190
14.250
14.500
14.500
14.500
14.750
14.750
14.750
15.000
15.000
15.000
15.000
15.000

13.000
13.250
13.375
13.500
13.500
13.250
13.250
13.500
13.625
14.000
14.000
13.750
14.250
13.875
14.000
14.000
14.500
14.500
14.125
14.250
14.250
14.500
14.500
14.625
15.000
15.000
14.750
14.875
15.000
15.000
15.500
15.500
15.750
15.500
15.500
15.563
15.750
16.000
15.875
15.690
16.250
16.000
16.000
16.500
16.250
16.250
16.500
16.500
16.500
16.750
17.000
17.000

0.750
0.750
0.750
0.750
0.812
0.688
0.750
0.750
0.750
0.750
0.812
0.750
0.812
0.750
0.688
0.750
0.750
0.812
0.750
0.625
0.688
0.687
0.750
0.750
0.750
0.812
0.750
0.750
0.687
0.750
0.750
0.812
0.812
0.687
0.750
0.750
0.750
0.812
0.812
0.625
0.812
0.688
0.750
0.812
0.688
0.750
0.750
0.688
0.750
0.750
0.750
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-14

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-4158
25003-4159
25003-4162
25003-4163
25003-4176
25003-4178
25003-4180
25003-4181
25003-4182
25003-4184
25003-4185
25003-4186
25003-4188
25003-4189
25003-4190
25003-4195
25003-4196
25003-4198
25003-4200
25003-4204
25003-4206
25003-4209
25003-4211
25003-4212
25003-4213
25003-4217
25003-4218
25003-4225
25003-4230
25003-4235
25003-4239
25003-4279
25003-4304
25003-4308
25003-4315
25003-4317
25003-4343
25003-4346
25003-4347
25003-4351
25003-4356
25003-4374
25003-4376
25003-4381
25003-4386
25003-4393
25003-4403
25003-4413
25003-4414
25003-4415
25003-4420
25003-4424

15.312
15.375
15.500
15.500
15.875
16.000
16.000
16.250
16.250
16.250
16.500
16.500
17.000
17.000
17.000
17.500
17.500
17.500
17.750
17.875
18.000
18.000
18.250
18.250
18.375
18.750
19.000
19.250
20.000
20.000
20.250
22.500
24.437
25.000
27.500
25.500
28.000
28.500
29.000
17.360
30.000
17.313
17.500
33.000
40.157
17.323
17.500
8.688
14.875
5.709
5.500
6.125

16.875
17.375
17.000
17.500
17.875
17.500
18.000
17.750
17.750
18.000
18.000
18.500
18.500
18.500
19.000
19.000
19.250
19.500
19.750
19.875
19.500
20.000
19.750
19.875
19.875
20.250
20.500
21.000
21.750
21.500
21.750
24.500
26.437
26.500
29.000
27.000
29.500
30.500
30.500
19.360
31.500
18.313
18.650
34.500
41.339
18.898
19.000
9.938
16.500
7.087
6.687
7.187

WIDTH
0.687
0.812
0.750
0.812
0.812
0.750
0.812
0.687
0.750
0.750
0.750
0.812
0.687
0.750
0.812
0.750
0.750
0.688
0.812
0.812
0.688
0.750
0.750
0.750
0.687
0.750
0.750
0.812
0.812
0.750
0.750
0.875
0.750
0.750
0.750
0.750
0.750
0.875
0.750
0.812
0.750
0.500
0.531
0.750
0.750
0.787
0.625
0.500
0.750
0.591
0.625
0.500

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-4425
25003-4426
25003-4435
25003-4438
25003-4440
25003-4441
25003-4442
25003-4444
25003-4445
25003-4447
25003-4449
25003-4450
25003-4451
25003-4452
25003-4455
25003-4459
25003-4460
25003-4461
25003-4471
25003-4476
25003-4477
25003-4478
25003-4479
25003-4480
25003-4481
25003-4482
25003-4489
25003-4490
25003-4493
25003-4494
25003-4495
25003-4496
25003-4497
25003-4502
25003-4503
25003-4504
25003-4505
25003-4506
25003-4507
25003-4508
25003-4509
25003-4510
25003-4511
25003-4512
25003-4513
25003-4515
25003-4516
25003-4517
25003-4518
25003-4520
25003-4521
25003-4522

5.312
3.875
37.000
37.500
57.500
12.063
2.977
8.625
6.438
4.664
7.086
11.000
5.375
11.938
3.750
4.563
9.563
5.500
41.250
15.250
6.938
6.938
6.937
12.625
27.559
9.859
5.512
6.063
19.188
15.625
10.500
12.500
9.842
8.500
9.000
9.000
9.000
9.000
9.000
9.000
9.250
16.929
9.250
9.625
9.750
9.750
9.750
9.750
8.688
10.750
16.535
10.750

6.687
5.062
39.000
39.500
59.500
13.625
3.959
10.125
7.708
5.875
8.500
12.375
6.500
13.760
4.750
5.437
10.653
6.756
42.750
17.250
8.125
8.375
8.500
14.000
29.055
10.859
6.387
7.500
20.938
17.250
12.000
14.000
11.417
10.000
10.000
10.125
10.250
10.375
10.500
10.625
10.250
18.504
10.500
10.875
10.750
11.000
11.125
11.250
10.625
12.000
18.504
12.250

WIDTH
0.625
0.375
1.000
0.875
0.812
0.750
0.500
0.609
0.625
0.500
0.625
0.750
0.750
0.750
0.438
0.500
0.500
0.500
0.750
0.812
0.625
0.625
0.625
0.750
0.748
0.500
0.375
0.500
0.625
0.750
0.625
0.625
0.590
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.787
0.625
0.750
0.625
0.625
0.625
0.625
0.750
0.625
0.750
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-15

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-4523
25003-4525
25003-4526
25003-4527
25003-4530
25003-4532
25003-4533
25003-4535
25003-4536
25003-4551
25003-4556
25003-4557
25003-4560
25003-4561
25003-4572
25003-4575
25003-4576
25003-4585
25003-4588
25003-4589
25003-4591
25003-4595
25003-4596
25003-4599
25003-4601
25003-4602
25003-4604
25003-4607
25003-4608
25003-4610
25003-4612
25003-4615
25003-4617
25003-4618
25003-4619
25003-4621
25003-4623
25003-4624
25003-4625
25003-4629
25003-4630
25003-4634
25003-4640
25003-4651
25003-4655
25003-4656
25003-4658
25003-4660
25003-4663
25003-4664
25003-4666
25003-4667

17.750
19.750
29.500
11.250
13.750
13.750
26.500
19.375
4.813
6.250
42.750
3.000
6.500
7.125
46.250
5.344
5.375
5.875
17.190
17.500
12.500
6.438
13.383
2.500
14.961
11.811
11.938
3.000
48.000
9.375
12.000
15.250
19.250
9.938
20.500
21.750
24.000
6.889
15.500
15.748
12.992
6.299
3.500
4.000
11.811
5.118
70.688
5.187
17.250
15.875
13.504
17.795

19.000
20.750
30.500
12.750
15.250
15.750
28.000
20.375
6.313
7.185
44.250
4.000
7.500
8.125
47.750
6.312
6.312
7.375
19.190
19.000
14.000
7.500
14.883
3.194
16.693
13.543
13.438
4.070
50.000
11.375
13.500
16.750
20.750
11.938
22.000
23.250
25.500
7.874
16.500
17.480
14.724
7.480
4.500
5.000
13.386
6.299
72.688
6.187
18.750
17.375
15.504
19.795

0.750
0.500
0.500
0.687
0.750
0.750
0.750
0.500
0.500
0.500
0.750
0.500
0.500
0.500
0.750
0.500
0.500
0.563
0.812
0.812
0.812
0.625
0.750
0.375
0.787
0.787
0.625
0.500
1.000
0.812
0.688
0.688
0.750
0.625
0.750
0.750
0.750
0.591
0.500
0.787
0.787
0.500
0.468
0.500
0.787
0.472
0.875
0.500
0.625
0.750
0.812
0.812

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-4673
25003-4675
25003-4676
25003-4678
25003-4684
25003-4686
25003-4688
25003-4691
25003-4694
25003-4698
25003-4699
25003-4702
25003-4705
25003-4710
25003-4713
25003-4714
25003-4724
25003-4726
25003-4727
25003-4729
25003-4730
25003-4733
25003-4738
25003-4739
25003-4741
25003-4742
25003-4743
25003-4745
25003-4747
25003-4750
25003-4756
25003-4757
25003-4758
25003-4759
25003-4760
25003-4761
25003-4762
25003-4763
25003-4764
25003-4765
25003-4768
25003-4769
25003-4770
25003-4771
25003-4772
25003-4774
25003-4776
25003-4778
25003-4779
25003-4785
25003-4786
25003-4788

19.000
24.500
25.750
19.625
10.000
3.475
3.375
14.250
6.375
25.875
14.500
75.000
4.437
3.437
5.438
26.000
9.250
6.000
8.500
6.125
6.950
5.250
4.000
19.500
19.000
3.719
32.500
3.500
3.933
5.437
14.687
8.661
4.187
4.812
8.250
52.000
5.625
7.938
10.063
2.755
3.150
3.070
13.000
4.500
3.875
7.000
3.937
10.313
13.250
11.962
5.312
12.750

20.125
25.625
26.875
21.625
11.910
4.500
4.375
16.000
7.750
26.875
15.750
76.000
5.437
5.000
6.500
27.000
10.500
7.203
10.250
7.625
8.125
6.562
4.897
21.500
21.000
5.094
33.625
4.999
4.933
6.437
16.687
9.842
5.187
5.750
9.375
54.000
7.000
8.875
11.688
3.543
4.249
3.937
14.250
5.750
5.000
8.375
5.187
11.938
15.250
12.687
6.578
14.000

0.547
0.500
0.500
0.812
0.812
0.375
0.438
0.812
0.625
0.500
0.625
0.375
0.375
0.500
0.525
0.500
0.500
0.750
0.750
0.750
0.750
0.750
0.500
0.500
0.500
0.500
0.562
0.375
0.500
0.500
0.812
0.512
0.375
0.500
0.500
0.812
0.750
0.500
0.750
0.375
0.438
0.437
0.625
0.375
0.500
0.688
0.500
0.813
0.812
0.500
0.500
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-16

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-4789
25003-4791
25003-4796
25003-4797
25003-4799
25003-4803
25003-4804
25003-4805
25003-4810
25003-4812
25003-4815
25003-4817
25003-4820
25003-4822
25003-4823
25003-4826
25003-4831
25003-4833
25003-4839
25003-4841
25003-4842
25003-4846
25003-4847
25003-4850
25003-4854
25003-4856
25003-4857
25003-4860
25003-4862
25003-4863
25003-4864
25003-4865
25003-4867
25003-4872
25003-4873
25003-4874
25003-4879
25003-4880
25003-4881
25003-4882
25003-4885
25003-4886
25003-4889
25003-4893
25003-4895
25003-4897
25003-4900
25003-4911
25003-4912
25003-4913
25003-4919
25003-4921

6.000
12.909
4.562
3.375
8.375
9.125
3.000
10.236
8.062
10.438
17.875
3.937
4.437
8.000
9.563
7.086
5.511
7.760
24.875
5.420
4.438
3.543
4.133
9.892
10.687
62.000
29.875
7.874
5.906
22.320
3.625
9.055
11.000
35.433
4.500
24.000
3.312
4.166
11.811
2.500
9.055
7.187
7.500
8.375
12.250
29.918
6.812
12.000
82.283
13.250
88.031
7.375

7.085
13.872
5.687
4.437
9.875
10.375
4.250
11.968
9.312
12.000
18.875
4.937
5.562
9.000
10.563
8.086
6.511
8.875
26.875
6.625
5.375
4.527
5.110
11.338
12.687
64.000
31.875
8.816
7.283
24.320
4.875
11.024
12.750
37.402
5.500
25.500
4.125
5.506
13.779
3.418
10.630
8.562
8.875
9.625
13.821
31.418
8.312
13.750
84.252
15.125
90.031
8.375

WIDTH
0.438
0.675
0.500
0.375
0.625
0.625
0.500
0.787
0.500
0.750
0.500
0.500
0.500
0.437
0.500
0.500
0.500
0.500
0.812
0.500
0.375
0.500
0.472
0.750
0.750
0.812
0.812
0.500
0.708
0.812
0.375
0.630
0.750
0.787
0.437
0.700
0.500
0.500
0.750
0.438
0.630
0.625
0.500
0.625
0.750
0.750
0.750
0.750
0.812
0.500
0.812
0.500

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-4922
25003-4923
25003-4924
25003-4926
25003-4934
25003-4939
25003-4940
25003-4948
25003-4949
25003-4950
25003-4954
25003-4963
25003-4969
25003-4970
25003-4971
25003-4980
25003-4981
25003-4989
25003-4990
25003-4992
25003-4994
25003-5003
25003-5006
25003-5009
25003-5010
25003-5012
25003-5013
25003-5014
25003-5017
25003-5023
25003-5025
25003-5029
25003-5032
25003-5033
25003-5039
25003-5050
25003-5051
25003-5052
25003-5055
25003-5057
25003-5058
25003-5061
25003-5062
25003-5067
25003-5075
25003-5079
25003-5081
25003-5082
25003-5092
25003-5093
25003-5097
25003-5099

8.500
10.000
7.000
20.250
4.750
4.562
21.000
3.187
15.000
10.000
3.071
10.562
13.000
15.000
17.000
23.074
8.750
9.724
7.854
8.858
10.728
4.475
11.000
8.062
5.500
11.500
36.031
11.344
26.375
3.000
3.125
16.929
6.687
31.250
16.250
27.000
3.563
4.937
20.500
6.062
4.687
49.498
14.250
10.625
4.310
3.750
42.750
9.875
5.312
9.375
3.688
18.937

9.750
11.250
8.250
22.250
6.250
5.562
22.000
4.187
17.000
11.500
4.571
12.562
14.125
16.125
18.125
24.954
10.000
10.724
8.854
9.858
11.728
5.500
12.625
9.562
7.000
12.875
38.031
12.593
28.375
4.000
4.250
18.897
7.937
33.250
17.250
28.500
4.563
6.437
22.500
7.125
5.937
51.375
15.750
11.625
5.300
5.000
43.750
11.875
6.562
10.375
5.000
20.937

WIDTH
0.500
0.500
0.500
0.812
0.750
0.375
0.500
0.500
0.500
0.625
0.500
0.750
0.546
0.547
0.547
0.812
0.515
0.500
0.500
0.500
0.500
0.500
0.625
0.750
0.750
0.750
0.812
0.625
0.812
0.375
0.500
0.787
0.500
0.750
0.500
0.625
0.500
0.562
0.812
0.500
0.500
0.812
0.750
0.625
0.475
0.500
0.500
0.750
0.625
0.437
0.500
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-17

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-5100
25003-5102
25003-5107
25003-5114
25003-5116
25003-5117
25003-5118
25003-5119
25003-5122
25003-5126
25003-5127
25003-5130
25003-5132
25003-5134
25003-5138
25003-5139
25003-5141
25003-5153
25003-5158
25003-5159
25003-5160
25003-5161
25003-5163
25003-5166
25003-5168
25003-5172
25003-5174
25003-5176
25003-5178
25003-5186
25003-5189
25003-5190
25003-5195
25003-5202
25003-5204
25003-5209
25003-5213
25003-5219
25003-5222
25003-5236
25003-5241
25003-5245
25003-5254
25003-5258
25003-5259
25003-5261
25003-5262
25003-5263
25003-5264
25003-5266
25003-5267
25003-5271

3.542
26.875
46.000
12.500
16.000
14.250
4.724
6.062
3.500
9.156
2.875
18.625
3.187
14.375
4.937
6.625
25.250
8.875
19.000
33.000
3.250
8.313
8.406
4.875
17.000
17.625
40.500
11.688
16.375
10.236
5.125
4.187
6.375
37.250
39.500
3.125
8.875
40.500
5.000
77.500
7.562
51.000
22.125
21.653
21.000
11.375
19.500
29.250
57.086
28.500
41.929
19.125

4.542
28.875
48.000
13.500
18.000
16.250
5.905
7.562
4.625
10.656
4.125
20.625
4.132
16.375
6.187
8.125
26.750
10.125
20.000
34.000
4.750
9.313
9.406
5.875
19.000
18.500
42.000
13.750
17.875
11.736
6.125
5.687
7.687
39.250
41.500
4.000
10.500
42.500
6.062
79.500
9.062
52.000
24.125
23.153
22.500
13.000
20.500
30.250
59.086
29.500
43.929
20.125

0.375
0.812
0.812
0.500
0.750
0.750
0.500
0.750
0.375
0.750
0.500
0.812
0.500
0.750
0.500
0.500
0.500
0.625
0.500
0.500
0.437
0.500
0.500
0.375
0.750
0.375
0.750
0.750
0.750
0.750
0.375
0.375
0.625
0.812
0.812
0.500
0.750
0.812
0.500
0.812
0.750
0.500
0.812
0.750
0.750
0.687
0.500
0.500
0.812
0.500
0.813
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-5273
25003-5274
25003-5278
25003-5279
25003-5281
25003-5284
25003-5287
25003-5290
25003-5291
25003-5294
25003-5297
25003-5298
25003-5302
25003-5303
25003-5307
25003-5308
25003-5312
25003-5313
25003-5320
25003-5326
25003-5331
25003-5333
25003-5334
25003-5335
25003-5336
25003-5337
25003-5338
25003-5339
25003-5340
25003-5341
25003-5346
25003-5347
25003-5348
25003-5349
25003-5350
25003-5351
25003-5352
25003-5353
25003-5354
25003-5355
25003-5356
25003-5357
25003-5358
25003-5359
25003-5361
25003-5363
25003-5364
25003-5365
25003-5366
25003-5367
25003-5368
25003-5369

52.000
55.000
26.781
84.000
29.625
6.000
43.543
15.354
19.875
10.625
85.000
11.625
21.375
11.027
11.575
8.394
21.000
3.625
9.250
39.250
4.250
7.480
9.055
5.906
7.086
7.874
8.267
9.842
12.204
12.922
4.331
4.527
4.724
5.708
10.629
10.236
11.811
4.133
4.921
5.314
6.693
8.661
8.464
9.448
32.375
3.937
4.331
4.527
4.724
5.118
5.511
5.906

53.000
56.000
28.781
86.000
31.625
7.531
45.543
16.929
21.875
11.625
87.000
13.625
23.375
12.500
12.575
9.394
22.750
4.500
10.250
40.750
5.687
8.661
10.230
7.086
8.267
9.055
9.448
11.023
13.385
14.173
5.512
5.708
5.905
6.889
11.811
11.417
12.992
5.314
6.102
6.496
7.874
9.842
9.645
10.629
33.625
4.921
5.315
5.511
5.708
6.259
6.811
7.204

0.500
0.500
0.812
0.812
0.812
0.588
0.812
0.750
0.812
0.415
0.812
0.812
0.812
0.625
0.500
0.500
0.750
0.500
0.437
0.750
0.500
0.492
0.590
0.551
0.492
0.492
0.590
0.590
0.590
0.590
0.551
0.551
0.551
0.551
0.590
0.590
0.590
0.551
0.551
0.551
0.492
0.590
0.590
0.590
0.625
0.433
0.433
0.433
0.433
0.472
0.547
0.547

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-18

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-5370
25003-5371
25003-5372
25003-5374
25003-5375
25003-5376
25003-5377
25003-5378
25003-5379
25003-5380
25003-5381
25003-5383
25003-5384
25003-5385
25003-5386
25003-5388
25003-5395
25003-5397
25003-5402
25003-5403
25003-5409
25003-5425
25003-5426
25003-5428
25003-5431
25003-5432
25003-5433
25003-5435
25003-5443
25003-5444
25003-5446
25003-5449
25003-5455
25003-5459
25003-5460
25003-5461
25003-5462
25003-5463
25003-5472
25003-5475
25003-5477
25003-5480
25003-5490
25003-5495
25003-5504
25003-5506
25003-5508
25003-5510
25003-5511
25003-5513
25003-5514
25003-5516

6.693
7.086
7.874
9.055
9.842
38.750
4.922
5.315
5.906
9.448
10.236
13.625
8.125
55.500
44.000
5.118
11.125
11.375
8.464
9.055
45.750
35.000
3.250
21.687
18.110
18.031
52.500
32.125
4.750
3.937
11.811
4.437
14.500
4.922
3.250
8.470
11.000
9.500
9.937
14.950
13.779
8.750
5.115
4.750
28.000
18.562
15.000
54.500
5.315
24.125
30.125
5.203

7.992
8.385
9.448
10.866
11.653
40.687
6.063
6.456
7.590
11.259
12.047
14.625
9.125
57.500
46.000
6.118
12.500
12.625
9.448
10.039
47.750
36.500
4.125
23.187
20.110
20.031
54.500
34.125
5.625
5.187
13.189
5.250
16.250
5.922
4.500
9.500
12.812
11.437
11.937
16.500
15.276
9.875
6.115
5.625
29.125
19.562
16.000
56.500
6.299
26.000
31.125
6.312

WIDTH
0.547
0.547
0.618
0.684
0.684
0.812
0.487
0.487
0.539
0.684
0.684
0.500
0.437
0.812
0.812
0.500
0.750
0.625
0.500
0.500
0.750
0.750
0.500
0.750
0.812
0.812
0.812
0.812
0.500
0.375
0.709
0.375
0.625
0.500
0.438
0.500
0.625
0.625
0.750
0.750
0.500
0.750
0.500
0.625
0.500
0.500
0.500
0.812
0.500
0.812
0.500
0.500

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-5519
25003-5523
25003-5525
25003-5530
25003-5532
25003-5533
25003-5534
25003-5536
25003-5550
25003-5552
25003-5553
25003-5558
25003-5559
25003-5563
25003-5575
25003-5576
25003-5577
25003-5578
25003-5579
25003-5585
25003-5586
25003-5587
25003-5594
25003-5595
25003-5596
25003-5597
25003-5598
25003-5599
25003-5601
25003-5602
25003-5605
25003-5606
25003-5611
25003-5612
25003-5613
25003-5614
25003-5615
25003-5618
25003-5619
25003-5622
25003-5624
25003-5625
25003-5628
25003-5629
25003-5634
25003-5635
25003-5636
25003-5637
25003-5638
25003-5639
25003-5640
25003-5642

35.000
10.250
8.780
15.750
22.673
69.375
17.562
12.205
21.500
24.000
23.750
12.312
8.875
6.187
9.062
12.598
51.000
7.562
45.000
5.000
64.488
61.810
17.719
23.300
53.250
5.875
8.661
16.062
38.250
34.000
7.875
4.312
31.000
28.875
17.900
23.570
23.595
50.000
21.000
37.812
74.500
40.000
6.300
7.078
53.625
4.217
5.780
6.281
7.530
10.530
13.580
11.500

36.000
11.750
10.780
17.250
24.173
71.375
19.062
13.189
23.250
25.125
25.750
13.937
10.625
7.250
10.062
13.583
52.875
9.065
46.500
6.000
66.488
63.810
19.219
24.300
54.250
7.140
9.661
17.062
40.250
35.500
8.875
5.794
32.000
29.750
19.400
25.070
25.095
51.500
23.000
39.812
76.000
41.500
7.781
8.562
54.625
5.280
7.030
7.530
8.780
12.030
14.580
12.625

WIDTH
0.500
0.625
0.750
0.578
0.750
0.812
0.750
0.500
0.812
0.500
0.812
0.750
0.812
0.500
0.375
0.500
0.812
0.750
0.750
0.687
0.812
0.812
0.750
0.500
0.500
0.562
0.500
0.500
0.812
0.750
0.375
0.500
0.500
0.500
0.750
0.750
0.750
0.750
0.750
0.812
0.750
0.750
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.500
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-19

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-5647
25003-5650
25003-5654
25003-5658
25003-5659
25003-5661
25003-5662
25003-5663
25003-5664
25003-5665
25003-5666
25003-5667
25003-5668
25003-5669
25003-5680
25003-5682
25003-5683
25003-5684
25003-5685
25003-5689
25003-5691
25003-5696
25003-5697
25003-5698
25003-5699
25003-5707
25003-5708
25003-5709
25003-5712
25003-5714
25003-5716
25003-5717
25003-5718
25003-5719
25003-5720
25003-5724
25003-5725
25003-5726
25003-5727
25003-5729
25003-5730
25003-5731
25003-5735
25003-5739
25003-5740
25003-5743
25003-5744
25003-5745
25003-5747
25003-5748
25003-5749
25003-5756

30.562
3.346
20.469
35.750
13.562
6.062
36.000
84.000
13.386
10.236
15.748
12.598
21.456
12.687
18.125
3.280
13.580
8.530
7.960
61.000
6.625
5.250
5.250
33.000
19.500
24.093
20.516
37.375
11.219
36.000
4.343
5.280
15.359
11.422
24.803
11.031
16.531
5.625
44.500
25.125
34.000
6.937
57.875
31.000
21.259
25.530
47.000
9.125
16.500
25.219
3.687
23.500

32.562
4.331
21.969
37.750
15.062
7.375
38.000
85.000
14.882
11.732
17.244
14.095
23.456
14.687
19.625
4.280
15.030
9.780
9.460
63.000
8.375
6.437
6.437
34.500
21.250
26.093
22.516
39.375
12.953
37.500
5.342
6.280
16.890
12.921
26.303
12.031
18.031
6.625
46.500
26.125
35.000
8.000
58.875
32.500
22.759
27.030
49.000
11.125
17.500
27.219
4.750
24.500

0.812
0.500
0.750
0.812
0.750
0.500
0.750
0.500
0.750
0.750
0.750
0.750
0.812
0.812
0.750
0.375
0.750
0.625
0.625
0.812
0.500
0.500
0.375
0.625
0.813
0.812
0.812
0.812
0.787
0.750
0.375
0.500
0.750
0.750
0.750
0.625
0.750
0.453
0.812
0.500
0.500
0.625
0.500
0.750
0.687
0.750
0.812
0.750
0.500
0.812
0.375
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-5757
25003-5760
25003-5761
25003-5763
25003-5765
25003-5766
25003-5768
25003-5769
25003-5776
25003-5777
25003-5779
25003-5780
25003-5783
25003-5784
25003-5787
25003-5788
25003-5789
25003-5792
25003-5795
25003-5796
25003-5797
25003-5798
25003-5799
25003-5801
25003-5802
25003-5803
25003-5804
25003-5805
25003-5806
25003-5807
25003-5808
25003-5809
25003-5811
25003-5815
25003-5816
25003-5818
25003-5819
25003-5820
25003-5821
25003-5823
25003-5824
25003-5825
25003-5827
25003-5828
25003-5829
25003-5830
25003-5835
25003-5845
25003-5846
25003-5847
25003-5849
25003-5850

80.500
70.500
20.866
4.134
35.000
44.000
21.500
18.062
11.687
3.346
25.590
29.527
13.125
9.055
95.875
102.000
7.875
6.500
21.250
79.500
5.118
25.000
26.771
14.960
20.078
16.141
42.250
98.000
80.500
112.000
10.827
105.039
66.500
14.166
86.000
24.500
16.125
18.500
29.687
46.250
35.433
13.625
16.625
25.187
42.913
34.252
11.811
14.567
14.173
31.890
19.881
16.929

82.500
72.500
22.637
5.315
36.500
45.500
23.000
20.062
13.187
4.437
26.590
30.527
15.125
10.551
97.875
104.000
8.937
7.937
22.750
81.500
5.992
26.000
27.771
16.460
22.078
18.141
44.250
99.500
82.437
113.937
11.827
107.039
68.000
15.750
88.000
25.500
18.125
19.500
31.687
48.250
36.933
14.875
17.625
27.187
44.913
36.252
12.811
15.551
15.673
33.890
21.881
18.429

0.812
0.812
0.812
0.500
0.625
0.750
0.750
0.812
0.625
0.500
0.500
0.500
0.812
0.750
0.812
0.812
0.500
0.625
0.750
0.812
0.375
0.500
0.500
0.750
0.812
0.812
0.812
0.750
0.812
0.812
0.590
0.812
0.750
0.625
0.812
0.500
0.812
0.500
0.812
0.812
0.750
0.750
0.500
0.812
0.812
0.812
0.500
0.500
0.750
0.812
0.812
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-20

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-5851
25003-5852
25003-5860
25003-5861
25003-5862
25003-5863
25003-5865
25003-5867
25003-5872
25003-5873
25003-5874
25003-5877
25003-5878
25003-5879
25003-5880
25003-5881
25003-5882
25003-5885
25003-5890
25003-5894
25003-5895
25003-5900
25003-5901
25003-5902
25003-5903
25003-5904
25003-5905
25003-5906
25003-5910
25003-5913
25003-5916
25003-5917
25003-5919
25003-5931
25003-5933
25003-5934
25003-5935
25003-5936
25003-5939
25003-5942
25003-5946
25003-5952
25003-5953
25003-5957
25003-5958
25003-5959
25003-5960
25003-5961
25003-5964
25003-5983
25003-5984
25003-5990

11.471
9.448
27.952
5.511
10.629
28.750
15.750
16.125
3.937
41.000
13.779
17.250
11.614
27.125
4.875
10.629
11.417
36.000
8.750
25.750
27.969
5.250
9.937
58.500
23.625
19.687
47.250
10.000
8.859
3.937
8.500
12.750
24.000
5.312
3.562
10.500
35.000
21.625
12.875
12.750
14.375
9.000
12.406
10.236
11.023
3.875
9.500
9.842
17.719
17.125
13.469
14.750

13.471
10.948
29.952
6.692
12.251
29.750
17.500
17.125
4.875
42.500
15.709
19.250
13.114
29.625
5.938
12.119
13.417
37.000
9.875
27.000
29.969
6.250
10.937
60.500
25.125
21.187
49.250
12.000
10.359
5.000
10.500
14.500
26.000
6.812
4.812
11.750
37.000
23.625
14.375
14.250
15.875
10.500
13.906
11.486
12.023
4.843
11.500
11.467
18.901
19.125
14.468
16.500

WIDTH
0.750
0.750
0.812
0.625
0.625
0.500
0.812
0.500
0.500
0.750
0.787
0.750
0.750
0.750
0.500
0.750
0.750
0.500
0.625
0.625
0.812
0.437
0.500
0.812
0.750
0.750
0.812
0.687
0.750
0.500
0.625
0.750
0.812
0.500
0.500
0.625
0.812
0.812
0.750
0.750
0.750
0.500
0.750
0.625
0.625
0.484
0.687
0.750
0.578
0.812
0.500
0.687

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-6000
25003-6015
25003-6016
25003-6052
25003-6059
25003-6067
25003-6068
25003-6079
25003-6084
25003-6087
25003-6092
25003-6102
25003-6107
25003-6111
25003-6121
25003-6128
25003-6129
25003-6130
25003-6132
25003-6136
25003-6142
25003-6143
25003-6147
25003-6150
25003-6163
25003-6164
25003-6165
25003-6168
25003-6172
25003-6175
25003-6178
25003-6182
25003-6185
25003-6190
25003-6191
25003-6198
25003-6199
25003-6201
25003-6202
25003-6204
25003-6205
25003-6210
25003-6213
25003-6214
25003-6216
25003-6219
25003-6229
25003-6237
25003-6238
25003-6247
25003-6250
25003-6251

7.875
4.500
7.812
4.134
40.000
9.750
28.125
19.250
4.656
10.937
9.062
3.125
33.500
3.937
3.250
3.312
3.937
76.500
18.375
5.187
4.125
33.750
5.062
5.562
7.000
5.875
6.000
13.000
6.625
7.250
4.937
7.375
7.750
8.937
22.062
5.125
6.875
9.750
23.000
8.250
3.937
8.687
4.750
9.500
10.187
10.125
6.687
39.000
11.187
8.250
3.741
7.250

9.056
5.375
9.312
5.118
42.000
10.750
29.250
21.250
6.031
12.437
11.062
4.125
35.500
5.062
4.125
4.250
5.000
78.500
19.875
6.437
5.500
35.750
6.375
6.750
8.375
6.875
7.000
14.825
8.125
8.250
6.437
8.375
8.750
10.187
24.062
6.125
8.000
11.160
24.000
9.250
5.312
9.938
5.750
10.500
11.188
11.375
7.687
41.000
12.188
9.750
5.240
8.750

WIDTH
0.375
0.500
0.750
0.512
0.812
0.500
0.500
0.812
0.500
0.625
0.750
0.437
0.812
0.500
0.437
0.437
0.469
0.812
0.750
0.625
0.438
0.812
0.562
0.500
0.500
0.437
0.437
0.812
0.687
0.437
0.750
0.437
0.437
0.625
0.812
0.437
0.437
0.588
0.500
0.437
0.500
0.750
0.375
0.437
0.500
0.625
0.500
0.812
0.500
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-21

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-6253
25003-6258
25003-6263
25003-6264
25003-6268
25003-6273
25003-6276
25003-6283
25003-6285
25003-6291
25003-6297
25003-6298
25003-6303
25003-6305
25003-6315
25003-6321
25003-6324
25003-6328
25003-6332
25003-6334
25003-6335
25003-6337
25003-6348
25003-6351
25003-6353
25003-6355
25003-6356
25003-6357
25003-6358
25003-6359
25003-6360
25003-6361
25003-6362
25003-6363
25003-6364
25003-6365
25003-6366
25003-6367
25003-6368
25003-6370
25003-6371
25003-6372
25003-6373
25003-6374
25003-6375
25003-6376
25003-6377
25003-6378
25003-6379
25003-6380
25003-6382
25003-6383

12.187
6.937
13.250
13.250
42.500
8.937
73.000
14.687
3.500
22.000
30.375
4.062
14.000
18.625
49.000
25.750
14.000
11.875
26.500
8.812
24.437
23.625
45.000
2.937
15.785
3.437
3.250
3.437
3.500
3.625
4.000
4.250
4.437
4.500
4.687
5.000
5.250
5.437
5.625
6.500
6.562
6.750
6.937
7.000
7.000
7.250
7.250
7.500
7.750
8.000
8.250
8.500

13.688
8.062
14.750
15.250
43.500
9.968
75.000
16.187
4.375
23.750
32.375
5.125
15.500
19.875
50.500
26.875
15.750
13.375
28.500
10.312
26.437
25.625
47.000
3.937
17.785
4.437
4.250
4.687
4.500
4.625
5.000
5.375
5.437
5.500
5.812
6.000
6.750
6.687
7.125
8.000
7.562
7.750
7.937
8.000
8.500
8.250
8.500
8.500
8.750
9.000
9.250
9.500

0.625
0.500
0.625
0.750
0.500
0.500
0.812
0.625
0.500
0.812
0.812
0.469
0.625
0.750
0.562
0.625
0.500
0.750
0.812
0.500
0.812
0.812
0.812
0.500
0.812
0.500
0.375
0.500
0.375
0.375
0.375
0.406
0.500
0.375
0.500
0.375
0.750
0.625
0.750
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-6384
25003-6386
25003-6387
25003-6388
25003-6389
25003-6390
25003-6391
25003-6392
25003-6393
25003-6394
25003-6395
25003-6396
25003-6397
25003-6398
25003-6399
25003-6400
25003-6401
25003-6402
25003-6403
25003-6404
25003-6405
25003-6406
25003-6407
25003-6408
25003-6409
25003-6410
25003-6416
25003-6419
25003-6420
25003-6423
25003-6424
25003-6426
25003-6428
25003-6431
25003-6441
25003-6449
25003-6450
25003-6453
25003-6455
25003-6464
25003-6471
25003-6473
25003-6474
25003-6483
25003-6484
25003-6485
25003-6491
25003-6492
25003-6504
25003-6508
25003-6510
25003-6512

8.500
8.750
9.000
9.500
9.625
9.750
10.000
5.125
11.000
11.000
11.000
12.750
16.250
16.750
18.000
20.000
22.000
7.125
29.500
30.000
32.500
36.000
42.000
18.500
4.000
4.437
10.875
25.000
34.500
9.000
70.000
19.750
10.625
4.750
12.208
12.500
6.250
5.000
15.625
3.812
2.750
38.500
5.750
26.000
12.125
5.062
4.812
7.875
10.937
19.000
8.000
45.125

9.750
10.000
10.000
10.500
11.625
11.000
11.000
6.125
12.125
12.500
13.000
14.750
18.250
18.750
20.000
22.000
24.000
8.250
31.500
31.125
33.625
38.000
44.000
20.500
5.265
5.687
12.875
27.000
36.500
10.125
72.000
21.750
12.625
5.875
13.703
13.875
7.250
6.500
17.125
4.812
3.750
40.500
6.968
28.000
14.125
6.062
5.812
8.875
12.937
21.000
9.250
47.125

0.625
0.625
0.500
0.500
0.750
0.500
0.500
0.422
0.547
0.750
0.750
0.750
0.812
0.750
0.812
0.812
0.812
0.469
0.812
0.500
0.500
0.812
0.812
0.812
0.500
0.500
0.812
0.812
0.812
0.547
0.812
0.812
0.812
0.562
0.750
0.437
0.437
0.375
0.750
0.500
0.500
0.812
0.500
0.812
0.750
0.500
0.500
0.500
0.750
0.812
0.500
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-22

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-6515
25003-6518
25003-6525
25003-6531
25003-6532
25003-6533
25003-6535
25003-6539
25003-6540
25003-6542
25003-6544
25003-6549
25003-6556
25003-6560
25003-6561
25003-6562
25003-6565
25003-6568
25003-6570
25003-6574
25003-6577
25003-6578
25003-6579
25003-6582
25003-6583
25003-6587
25003-6595
25003-6597
25003-6601
25003-6602
25003-6609
25003-6615
25003-6616
25003-6618
25003-6619
25003-6621
25003-6622
25003-6625
25003-6626
25003-6638
25003-6646
25003-6647
25003-6648
25003-6653
25003-6657
25003-6664
25003-6669
25003-6671
25003-6672
25003-6676
25003-6677
25003-6682

13.850
13.980
4.687
15.156
5.437
9.844
21.000
25.750
5.500
21.437
4.625
11.375
7.250
14.000
4.937
15.500
49.500
10.441
8.625
5.500
29.250
4.125
5.225
53.000
29.562
4.500
9.250
6.906
16.625
6.125
32.000
17.750
4.063
15.250
3.750
11.500
5.375
4.125
17.125
4.920
8.875
7.875
9.375
59.750
16.250
9.625
9.500
48.000
11.250
9.250
30.750
9.625

15.500
15.500
5.687
17.156
6.656
11.343
23.000
27.000
6.765
23.437
5.625
12.375
8.437
15.000
5.937
17.250
51.500
11.441
9.875
6.750
31.250
5.187
6.225
54.875
31.562
5.512
10.750
8.156
18.625
7.625
33.125
19.250
5.312
17.250
4.875
12.750
6.375
5.125
18.625
6.125
10.875
9.125
10.625
60.750
18.250
10.875
10.625
50.000
12.500
10.250
31.750
11.125

WIDTH
0.750
0.750
0.500
0.812
0.463
0.812
0.812
0.500
0.500
0.812
0.375
0.500
0.590
0.500
0.500
0.750
0.812
0.375
0.625
0.750
0.812
0.500
0.500
0.812
0.812
0.375
0.625
0.625
0.812
0.625
0.500
0.750
0.500
0.625
0.375
0.500
0.375
0.375
0.750
0.437
0.750
0.500
0.625
0.500
0.750
0.500
0.500
0.812
0.625
0.500
0.500
0.500

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-6683
25003-6684
25003-6687
25003-6697
25003-6698
25003-6704
25003-6705
25003-6709
25003-6710
25003-6718
25003-6719
25003-6728
25003-6736
25003-6740
25003-6748
25003-6752
25003-6754
25003-6756
25003-6759
25003-6766
25003-6769
25003-6772
25003-6773
25003-6775
25003-6778
25003-6781
25003-6782
25003-6783
25003-6786
25003-6789
25003-6791
25003-6797
25003-6801
25003-6803
25003-6805
25003-6807
25003-6808
25003-6809
25003-6812
25003-6813
25003-6815
25003-6817
25003-6818
25003-6819
25003-6820
25003-6821
25003-6822
25003-6823
25003-6826
25003-6827
25003-6829
25003-6830

10.500
8.250
11.500
16.500
10.250
10.625
11.875
3.937
20.125
20.125
11.906
5.750
22.687
18.375
4.531
3.343
4.937
9.125
7.750
24.125
15.750
23.500
7.500
51.000
14.063
10.500
12.875
4.187
28.000
120.062
19.606
8.937
4.500
28.750
32.750
21.500
10.000
22.812
17.322
8.875
12.562
6.500
6.690
26.815
4.331
16.000
36.750
25.196
11.750
8.750
12.250
20.472

12.000
9.750
13.000
18.500
11.500
12.625
12.875
4.937
22.125
22.125
13.156
6.937
24.562
20.375
5.531
4.343
5.937
10.125
9.000
25.125
17.750
25.500
9.000
53.000
16.062
11.500
14.750
5.437
30.000
122.062
21.575
10.000
5.937
30.750
34.750
22.750
11.250
24.812
18.822
9.875
14.062
7.750
7.940
28.815
5.831
17.750
38.750
26.696
13.500
9.750
14.250
21.972

WIDTH
0.500
0.625
0.625
0.750
0.625
0.750
0.500
0.375
0.812
0.750
0.625
0.500
0.750
0.812
0.500
0.500
0.375
0.500
0.500
0.500
0.812
0.750
0.500
0.812
0.812
0.500
0.812
0.500
0.812
0.812
0.812
0.500
0.500
0.812
0.812
0.750
0.625
0.812
0.750
0.500
0.750
0.500
0.625
0.812
0.500
0.750
0.812
0.750
0.750
0.500
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-23

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-6836
25003-6839
25003-6840
25003-6841
25003-6844
25003-6845
25003-6849
25003-6851
25003-6853
25003-6861
25003-6862
25003-6863
25003-6867
25003-6868
25003-6870
25003-6873
25003-6877
25003-6878
25003-6879
25003-6882
25003-6883
25003-6885
25003-6886
25003-6889
25003-6890
25003-6891
25003-6894
25003-6896
25003-6897
25003-6905
25003-6907
25003-6908
25003-6910
25003-6915
25003-6918
25003-6919
25003-6922
25003-6923
25003-6924
25003-6926
25003-6932
25003-6933
25003-6935
25003-6939
25003-6940
25003-6943
25003-6944
25003-6947
25003-6951
25003-6957
25003-6958
25003-6960

11.750
3.250
11.687
7.078
7.875
8.750
30.000
4.312
21.500
7.250
3.125
32.986
6.299
3.000
4.125
15.750
14.000
16.125
23.500
10.375
15.125
43.500
26.437
45.747
6.750
39.000
33.464
3.740
6.625
80.000
29.906
34.500
23.250
65.000
25.500
4.375
6.281
3.562
5.750
7.875
11.811
16.929
10.625
5.000
26.000
8.812
33.250
33.000
6.875
4.328
33.000
3.750

13.750
4.250
13.250
8.578
9.000
10.250
32.000
5.187
23.000
8.250
4.250
33.986
7.549
4.125
5.000
16.750
16.000
18.125
25.500
11.875
17.125
45.000
28.437
47.516
7.875
40.747
35.236
4.740
7.625
82.000
31.906
36.000
25.250
67.000
27.500
5.875
7.281
4.625
7.000
9.281
13.311
17.929
12.000
6.500
27.125
9.812
35.250
34.125
8.000
5.203
34.937
4.812

0.750
0.437
0.625
0.625
0.500
0.500
0.812
0.375
0.625
0.375
0.375
0.500
0.625
0.375
0.500
0.500
0.750
0.750
0.812
0.500
0.625
0.750
0.812
0.787
0.500
0.787
0.787
0.500
0.500
0.812
0.812
0.750
0.812
0.812
0.750
0.375
0.375
0.375
0.375
0.750
0.750
0.500
0.750
0.750
0.500
0.500
0.812
0.500
0.500
0.375
0.812
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-6964
25003-6965
25003-6967
25003-6972
25003-6973
25003-6982
25003-6984
25003-6987
25003-6989
25003-6991
25003-6992
25003-6994
25003-6998
25003-7010
25003-7015
25003-7018
25003-7019
25003-7036
25003-7039
25003-7043
25003-7053
25003-7059
25003-7063
25003-7075
25003-7091
25003-7098
25003-7101
25003-7102
25003-7105
25003-7106
25003-7107
25003-7108
25003-7117
25003-7119
25003-7123
25003-7124
25003-7127
25003-7129
25003-7131
25003-7132
25003-7133
25003-7134
25003-7135
25003-7137
25003-7138
25003-7139
25003-7144
25003-7147
25003-7148
25003-7149
25003-7157
25003-7161

11.023
24.625
17.250
21.750
7.874
6.102
16.375
24.500
58.000
9.448
4.331
14.760
25.750
10.236
63.500
48.875
13.622
3.937
29.375
17.406
11.625
18.500
6.781
3.437
15.750
22.812
8.500
49.250
11.937
53.543
29.134
7.875
5.906
24.015
4.063
5.375
16.535
4.187
22.000
5.312
7.937
101.250
12.625
96.620
34.000
23.375
3.071
10.125
20.750
14.500
8.250
30.500

12.023
25.875
18.750
23.750
9.875
7.102
17.375
26.250
60.000
10.448
5.905
16.339
27.250
11.811
65.500
50.875
15.122
4.812
31.375
18.406
12.625
20.500
8.031
4.437
16.875
24.312
10.500
51.250
13.938
55.543
31.134
9.125
7.410
25.984
5.062
6.875
18.035
5.375
23.000
6.312
9.437
103.250
13.875
98.620
36.000
25.375
4.071
11.500
22.750
16.000
9.750
32.500

0.500
0.562
0.750
0.812
0.625
0.500
0.500
0.812
0.750
0.500
0.625
0.630
0.750
0.630
0.812
0.812
0.750
0.375
0.812
0.500
0.500
0.750
0.625
0.375
0.625
0.750
0.750
0.812
0.812
0.812
0.812
0.375
0.625
0.812
0.500
0.750
0.750
0.470
0.500
0.500
0.750
0.812
0.625
0.812
0.812
0.812
0.500
0.750
0.812
0.625
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-24

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-7162
25003-7163
25003-7172
25003-7175
25003-7180
25003-7195
25003-7196
25003-7199
25003-7200
25003-7204
25003-7205
25003-7206
25003-7212
25003-7213
25003-7214
25003-7219
25003-7221
25003-7227
25003-7239
25003-7243
25003-7244
25003-7250
25003-7251
25003-7253
25003-7263
25003-7264
25003-7267
25003-7268
25003-7271
25003-7274
25003-7275
25003-7276
25003-7279
25003-7281
25003-7284
25003-7288
25003-7291
25003-7298
25003-7306
25003-7320
25003-7321
25003-7322
25003-7323
25003-7325
25003-7331
25003-7334
25003-7336
25003-7340
25003-7344
25003-7352
25003-7355
25003-7356

SHAFT

BORE

23.250 24.750
25.250 26.750
5.750
6.750
13.750 14.750
7.500
8.750
20.187 22.187
20.472 22.244
42.500 44.500
24.750 26.750
11.000 12.625
4.500
5.625
31.750 32.750
20.000 22.000
3.125
3.875
5.937
7.437
11.500 13.000
5.118
6.299
50.000 51.000
15.375 16.875
20.437 22.062
33.000 35.000
12.062 13.562
27.500 29.500
3.500
5.000
11.500 12.750
6.250
7.687
5.512
6.693
6.693
7.874
4.528
5.512
6.875
8.125
5.812
6.937
6.299
7.480
12.625 14.625
18.898 20.472
22.834 24.334
10.433 11.683
94.000 96.000
5.937
6.937
12.000 13.250
7.667
9.055
6.437
7.437
9.062 10.062
13.375 14.875
29.906 30.906
29.000 31.000
98.750 100.750
8.875 10.375
27.000 29.000
8.375
9.500
24.250 26.250
31.750 33.750
22.625 24.625

WIDTH
0.750
0.750
0.437
0.500
0.500
0.812
0.812
0.750
0.812
0.750
0.375
0.500
0.750
0.375
0.750
0.500
0.511
0.500
0.750
0.812
0.812
0.750
0.812
0.500
0.625
0.625
0.591
0.591
0.472
0.500
0.500
0.591
0.750
0.787
0.750
0.625
0.812
0.500
0.625
0.591
0.500
0.500
0.750
0.500
0.812
0.812
0.750
0.812
0.625
0.812
0.812
0.812

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-7362
25003-7367
25003-7374
25003-7376
25003-7378
25003-7379
25003-7383
25003-7387
25003-7388
25003-7389
25003-7391
25003-7394
25003-7396
25003-7407
25003-7412
25003-7413
25003-7414
25003-7416
25003-7424
25003-7425
25003-7426
25003-7431
25003-7432
25003-7437
25003-7438
25003-7441
25003-7442
25003-7443
25003-7444
25003-7446
25003-7447
25003-7449
25003-7464
25003-7468
25003-7469
25003-7470
25003-7472
25003-7481
25003-7482
25003-7487
25003-7489
25003-7507
25003-7539
25003-7543
25003-7544
25003-7547
25003-7548
25003-7550
25003-7570
25003-7577
25003-7578
25003-7583

5.687
7.625
3.250
4.724
6.937
13.875
5.512
32.500
7.874
3.750
11.024
3.346
4.331
21.500
31.000
18.000
23.375
3.937
67.000
15.937
3.150
15.500
10.625
11.365
3.437
32.000
15.750
7.437
5.687
20.032
9.437
4.331
3.740
3.469
24.500
39.500
6.188
5.937
4.331
18.000
22.500
5.800
15.250
47.375
60.000
13.000
38.000
40.250
12.125
8.000
3.500
76.000

6.937
8.625
4.250
5.910
8.437
15.375
6.693
34.500
9.055
4.750
12.598
4.724
5.512
23.500
33.000
19.750
24.875
5.437
68.500
17.937
4.331
17.500
11.875
12.625
4.437
34.000
17.500
8.500
7.000
21.654
10.625
5.541
4.990
4.500
25.625
40.500
7.500
7.187
5.250
19.000
24.500
6.800
17.250
48.875
61.500
14.750
39.500
41.750
13.625
9.125
4.750
78.000

WIDTH
0.500
0.500
0.500
0.472
0.500
0.750
0.551
0.812
0.591
0.375
0.787
0.472
0.472
0.812
0.812
0.812
0.750
0.500
0.750
0.750
0.472
0.750
0.625
0.625
0.437
0.812
0.750
0.625
0.625
0.812
0.625
0.500
0.500
0.625
0.625
0.500
0.625
0.625
0.375
0.500
0.812
0.500
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.500
0.375
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-25

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-7587
25003-7588
25003-7589
25003-7590
25003-7591
25003-7592
25003-7593
25003-7594
25003-7595
25003-7596
25003-7597
25003-7598
25003-7600
25003-7601
25003-7602
25003-7606
25003-7617
25003-7618
25003-7621
25003-7624
25003-7625
25003-7634
25003-7637
25003-7639
25003-7640
25003-7641
25003-7642
25003-7643
25003-7644
25003-7646
25003-7647
25003-7655
25003-7656
25003-7658
25003-7661
25003-7674
25003-7679
25003-7682
25003-7695
25003-7696
25003-7699
25003-7700
25003-7704
25003-7708
25003-7709
25003-7710
25003-7714
25003-7716
25003-7719
25003-7726
25003-7735
25003-7736

4.734
10.187
17.525
4.250
3.312
15.565
23.000
23.750
4.311
2.937
6.312
10.750
12.750
16.000
13.125
11.000
8.812
18.250
9.875
87.000
17.500
6.109
9.448
11.500
9.250
37.402
3.375
69.000
31.500
25.437
5.937
28.500
3.187
31.406
7.937
7.062
25.196
3.125
35.500
86.417
26.125
18.500
14.000
15.312
10.629
26.000
23.110
11.000
6.187
6.063
12.205
10.000

5.984
11.437
18.525
5.250
4.312
16.565
24.250
25.250
5.331
3.937
7.312
11.750
13.750
17.406
15.125
12.500
10.312
20.250
10.875
89.000
19.500
7.094
10.433
12.375
10.125
38.902
4.250
71.000
33.500
27.187
7.187
30.500
4.187
32.992
8.937
8.062
27.196
4.250
37.500
88.417
28.125
19.875
15.375
17.312
11.629
28.000
24.610
12.500
7.437
7.062
13.205
11.125

0.500
0.625
0.500
0.375
0.375
0.500
0.750
0.750
0.500
0.375
0.625
0.500
0.500
0.609
0.750
0.375
0.750
0.812
0.500
0.812
0.750
0.492
0.492
0.375
0.375
0.750
0.500
0.812
0.812
0.750
0.500
0.812
0.375
0.750
0.500
0.500
0.812
0.625
1.000
0.812
0.812
0.750
0.531
0.812
0.409
0.750
0.750
0.500
0.500
0.500
0.500
0.547

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-7740
25003-7744
25003-7746
25003-7751
25003-7752
25003-7755
25003-7756
25003-7758
25003-7764
25003-7768
25003-7771
25003-7773
25003-7785
25003-7789
25003-7795
25003-7801
25003-7804
25003-7805
25003-7807
25003-7811
25003-7812
25003-7813
25003-7814
25003-7816
25003-7817
25003-7820
25003-7821
25003-7822
25003-7825
25003-7827
25003-7830
25003-7831
25003-7832
25003-7833
25003-7834
25003-7835
25003-7836
25003-7838
25003-7839
25003-7841
25003-7847
25003-7857
25003-7858
25003-7859
25003-7863
25003-7866
25003-7867
25003-7869
25003-7871
25003-7874
25003-7875
25003-7878

7.125
7.750
3.875
38.000
40.250
50.500
71.250
8.000
9.642
29.973
6.500
30.250
56.250
6.187
4.750
15.250
8.687
13.000
7.086
7.187
7.187
36.500
15.187
6.229
49.625
43.562
4.437
20.236
49.250
43.000
49.500
9.250
11.250
2.937
8.437
9.625
4.724
23.000
3.543
3.312
7.437
4.812
15.750
25.250
38.000
30.800
4.937
8.125
81.000
11.732
36.500
11.029

8.250
8.938
4.750
39.000
41.250
52.500
73.250
9.500
10.642
31.973
7.687
32.250
58.125
7.187
6.000
16.750
9.937
14.500
8.267
8.686
8.187
38.500
17.187
7.480
50.875
45.562
5.812
22.236
51.125
45.000
51.250
10.625
12.750
3.687
9.687
10.500
6.299
25.000
4.724
4.312
8.437
5.937
17.250
27.250
40.000
31.800
6.437
9.187
83.000
12.606
38.438
12.029

0.500
0.625
0.375
0.500
0.500
0.812
0.812
0.500
0.500
0.687
0.625
0.812
0.812
0.500
0.375
0.750
0.625
0.625
0.591
0.625
0.500
0.812
0.750
0.511
0.562
1.000
0.500
0.812
0.812
0.812
0.812
0.750
0.625
0.375
0.625
0.500
0.472
0.812
0.472
0.500
0.500
0.375
0.562
0.812
0.812
0.500
0.500
0.500
0.812
0.375
0.812
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-26

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-7881
25003-7882
25003-7889
25003-7891
25003-7893
25003-7898
25003-7899
25003-7900
25003-7911
25003-7924
25003-7941
25003-7969
25003-7979
25003-8043
25003-8049
25003-8058
25003-8103
25003-8108
25003-8115
25003-8119
25003-8122
25003-8123
25003-8134
25003-8137
25003-8139
25003-8140
25003-8142
25003-8159
25003-8171
25003-8172
25003-8175
25003-8177
25003-8179
25003-8189
25003-8190
25003-8191
25003-8194
25003-8198
25003-8200
25003-8210
25003-8215
25003-8223
25003-8228
25003-8229
25003-8233
25003-8234
25003-8242
25003-8252
25003-8261
25003-8265
25003-8271
25003-8276

27.562
6.688
9.625
9.448
11.811
14.214
25.750
28.375
60.000
6.437
3.000
13.312
3.937
27.000
7.480
53.000
27.250
23.875
12.875
14.750
32.687
15.000
6.875
5.125
24.250
9.960
8.750
3.687
6.500
36.460
8.125
8.875
9.250
8.469
27.750
17.250
6.312
50.000
35.437
45.250
5.187
8.500
47.750
12.500
3.250
8.187
4.724
7.500
12.795
8.260
14.875
2.344

29.562
7.937
10.625
11.023
13.386
16.214
26.875
29.500
62.000
7.687
3.937
15.312
5.118
28.000
8.661
55.000
29.250
24.875
14.875
16.250
34.687
16.750
8.125
6.625
25.250
10.834
10.250
4.937
7.874
38.460
9.125
10.375
10.750
9.968
29.750
19.250
7.312
52.000
37.437
47.125
6.437
10.375
49.750
13.750
4.249
9.312
5.905
8.375
13.669
9.142
16.875
3.219

WIDTH
0.812
0.625
0.500
0.629
0.630
0.812
0.547
0.500
0.812
0.625
0.375
0.812
0.500
0.500
0.591
0.812
0.812
0.500
0.750
0.625
0.812
0.812
0.562
0.750
0.500
0.375
0.625
0.500
0.472
0.812
0.500
0.500
0.500
0.750
0.812
0.812
0.500
0.875
0.812
0.812
0.500
0.625
0.812
0.625
0.375
0.500
0.433
0.500
0.375
0.375
0.812
0.625

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-8279
25003-8281
25003-8285
25003-8287
25003-8295
25003-8299
25003-8313
25003-8315
25003-8324
25003-8332
25003-8334
25003-8385
25003-8388
25003-8402
25003-8418
25003-8420
25003-8421
25003-8429
25003-8433
25003-8434
25003-8444
25003-8445
25003-8446
25003-8447
25003-8451
25003-8452
25003-8455
25003-8468
25003-8476
25003-8481
25003-8483
25003-8488
25003-8490
25003-8494
25003-8504
25003-8509
25003-8511
25003-8512
25003-8525
25003-8526
25003-8534
25003-8543
25003-8549
25003-8550
25003-8559
25003-8560
25003-8563
25003-8565
25003-8567
25003-8575
25003-8576
25003-8578

76.250
14.875
23.125
11.625
16.750
18.898
9.625
11.750
64.000
13.187
10.500
2.937
9.500
4.812
8.187
7.874
20.000
3.543
6.875
7.000
4.437
6.692
19.500
9.437
8.250
8.375
4.562
23.187
17.500
8.858
3.937
2.937
4.437
9.000
16.535
39.750
12.906
22.250
11.811
22.750
4.437
4.438
32.125
32.250
11.562
8.500
66.000
10.500
6.625
5.437
13.000
7.812

78.250
16.375
24.625
13.125
18.250
20.866
10.875
13.750
66.000
14.187
11.750
4.000
11.000
5.812
9.187
9.448
21.000
4.724
7.875
8.406
5.687
8.192
21.500
10.687
9.500
9.875
5.812
25.187
19.250
9.842
4.906
3.906
5.890
10.500
18.110
41.750
14.906
24.250
13.543
24.750
5.875
5.875
33.625
33.625
13.062
10.500
68.000
11.750
8.000
6.937
14.000
8.812

WIDTH
0.812
0.750
0.618
0.750
0.750
0.787
0.625
0.812
0.812
0.500
0.500
0.375
0.500
0.375
0.500
0.629
0.500
0.500
0.500
0.588
0.625
0.750
0.812
0.625
0.500
0.500
0.500
0.812
0.625
0.492
0.484
0.484
0.484
0.609
0.787
0.812
0.750
0.812
0.807
0.812
0.375
0.375
0.625
0.625
0.750
0.500
0.812
0.750
0.500
0.625
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-27

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-8580
25003-8583
25003-8586
25003-8588
25003-8589
25003-8592
25003-8606
25003-8607
25003-8614
25003-8618
25003-8620
25003-8623
25003-8629
25003-8634
25003-8639
25003-8654
25003-8655
25003-8656
25003-8657
25003-8658
25003-8665
25003-8684
25003-8689
25003-8691
25003-8693
25003-8695
25003-8699
25003-8701
25003-8702
25003-8705
25003-8709
25003-8713
25003-8719
25003-8721
25003-8741
25003-8748
25003-8750
25003-8753
25003-8761
25003-8768
25003-8773
25003-8776
25003-8780
25003-8783
25003-8790
25003-8802
25003-8803
25003-8804
25003-8805
25003-8838
25003-8841
25003-8846

7.187
8.500
3.206
30.000
12.500
3.875
8.661
9.843
4.625
66.500
13.500
8.469
4.937
19.685
3.687
6.187
10.630
13.779
5.250
21.875
8.500
36.500
24.500
18.000
3.343
18.504
6.693
13.386
15.748
16.535
8.500
15.748
19.125
1.750
14.500
68.000
67.000
9.437
11.000
4.133
25.625
8.375
17.000
9.500
3.938
82.677
3.543
12.000
8.062
9.062
10.000
9.562

8.639
9.375
4.250
31.125
14.062
4.875
10.236
11.417
6.077
68.500
15.000
9.968
6.000
21.685
4.687
7.437
12.205
15.354
6.250
23.875
10.000
38.250
26.500
19.500
4.343
20.472
7.943
14.886
17.480
18.504
9.875
17.748
21.125
2.656
15.500
70.000
69.000
10.437
12.000
5.118
26.750
9.625
18.250
10.750
4.906
84.645
4.527
13.000
9.062
10.500
11.437
11.062

0.625
0.500
0.500
0.562
0.750
0.437
0.630
0.630
0.484
0.812
0.625
0.500
0.375
0.812
0.375
0.625
0.630
0.630
0.750
0.812
0.500
0.812
0.812
0.812
0.375
0.741
0.625
0.750
0.662
0.741
0.750
0.750
0.812
0.625
0.500
0.812
0.812
0.500
0.375
0.472
0.500
0.500
0.625
0.500
0.500
0.812
0.491
0.500
0.463
0.750
0.750
0.625

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-8847
25003-8848
25003-8850
25003-8861
25003-8865
25003-8869
25003-8872
25003-8874
25003-8888
25003-8905
25003-8934
25003-8946
25003-8957
25003-8962
25003-8980
25003-8981
25003-8998
25003-8999
25003-9015
25003-9017
25003-9021
25003-9022
25003-9023
25003-9025
25003-9031
25003-9056
25003-9057
25003-9060
25003-9065
25003-9077
25003-9085
25003-9089
25003-9090
25003-9094
25003-9099
25003-9104
25003-9114
25003-9115
25003-9116
25003-9132
25003-9133
25003-9142
25003-9143
25003-9144
25003-9145
25003-9146
25003-9148
25003-9149
25003-9151
25003-9154
25003-9156
25003-9158

15.812
19.937
14.000
15.250
74.000
20.500
66.500
10.937
14.750
2.362
30.500
21.250
4.000
11.500
30.000
16.625
12.500
13.895
3.469
5.750
6.437
8.562
6.000
25.750
5.937
3.375
9.937
4.125
7.519
16.000
4.437
3.750
25.500
11.500
6.062
3.687
17.000
19.000
14.500
4.500
10.375
5.875
4.312
4.331
9.937
8.688
12.000
11.000
8.937
25.000
31.750
5.512

17.437
21.187
15.250
16.625
76.000
21.500
69.000
12.500
16.125
3.112
32.500
22.250
5.125
12.500
31.250
18.125
13.906
15.750
4.500
7.250
7.937
10.062
7.125
26.875
7.687
4.375
11.500
5.250
9.019
17.000
5.937
5.000
27.500
12.500
7.312
4.687
18.125
21.000
16.500
6.000
11.625
7.375
5.312
5.500
11.437
9.687
13.937
12.875
9.937
27.000
33.750
6.692

0.812
0.625
0.750
0.531
0.812
0.500
0.812
0.625
0.687
0.375
0.812
0.500
0.375
0.375
0.500
0.750
0.750
0.750
0.500
0.750
0.750
0.750
0.719
0.562
0.625
0.375
0.750
0.375
0.750
0.500
0.500
0.375
0.812
0.500
0.625
0.500
0.562
0.750
0.625
0.375
0.625
0.750
0.500
0.437
0.750
0.500
0.812
0.812
0.500
0.750
0.750
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-28

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-9162
25003-9163
25003-9172
25003-9173
25003-9174
25003-9175
25003-9181
25003-9182
25003-9184
25003-9185
25003-9188
25003-9190
25003-9197
25003-9200
25003-9201
25003-9202
25003-9203
25003-9204
25003-9205
25003-9207
25003-9210
25003-9212
25003-9217
25003-9219
25003-9225
25003-9230
25003-9232
25003-9236
25003-9238
25003-9242
25003-9243
25003-9244
25003-9245
25003-9248
25003-9251
25003-9253
25003-9254
25003-9255
25003-9256
25003-9258
25003-9260
25003-9261
25003-9262
25003-9266
25003-9267
25003-9268
25003-9269
25003-9272
25003-9273
25003-9275
25003-9276
25003-9279

2.559
14.875
9.250
22.937
3.750
5.315
15.000
14.173
8.000
6.437
43.125
3.740
5.812
39.250
9.000
52.250
8.625
4.375
32.250
8.500
8.625
32.375
6.500
36.625
29.527
3.000
6.125
60.000
42.375
8.661
8.661
7.062
6.032
33.937
5.312
9.687
14.750
13.000
13.375
13.125
9.625
17.500
7.062
25.875
8.375
4.984
93.000
9.937
17.125
5.196
20.875
15.125

3.543
16.875
11.250
24.937
4.625
6.693
17.000
15.748
9.438
7.375
44.625
4.724
6.812
41.250
10.000
54.125
10.625
5.375
34.250
9.750
9.875
33.625
7.875
38.625
31.125
4.062
7.000
62.000
44.375
9.911
9.911
8.562
7.312
35.468
6.937
11.187
16.750
14.750
15.375
14.625
11.125
18.500
8.062
27.875
10.375
6.234
95.000
11.187
18.125
6.299
22.875
16.125

WIDTH
0.375
0.500
0.625
0.812
0.375
0.472
0.625
0.748
0.500
0.500
0.750
0.472
0.500
0.812
0.437
0.812
0.812
0.375
0.812
0.750
0.500
0.500
0.750
0.812
0.750
0.375
0.500
0.750
0.750
0.500
0.625
0.500
0.500
0.812
0.500
0.750
0.750
0.500
0.812
0.750
0.750
0.500
0.625
0.812
0.750
0.500
0.812
0.625
0.500
0.500
0.812
0.375

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-9282
25003-9284
25003-9285
25003-9286
25003-9287
25003-9288
25003-9289
25003-9290
25003-9295
25003-9296
25003-9298
25003-9300
25003-9301
25003-9303
25003-9305
25003-9310
25003-9312
25003-9313
25003-9314
25003-9315
25003-9316
25003-9317
25003-9322
25003-9323
25003-9324
25003-9325
25003-9327
25003-9331
25003-9334
25003-9335
25003-9338
25003-9339
25003-9340
25003-9344
25003-9348
25003-9349
25003-9371
25003-9372
25003-9374
25003-9375
25003-9382
25003-9383
25003-9384
25003-9389
25003-9391
25003-9392
25003-9394
25003-9395
25003-9396
25003-9403
25003-9404
25003-9420

24.500
3.937
16.250
16.225
14.013
31.000
64.500
68.000
9.187
16.350
3.875
9.625
12.375
16.875
25.750
61.250
21.260
24.750
37.000
17.332
13.779
9.774
89.000
110.500
37.000
25.590
57.375
13.375
23.067
35.375
17.375
30.000
7.687
65.250
32.187
19.187
23.250
4.969
6.500
27.375
25.625
24.812
10.250
5.000
21.250
20.827
55.000
53.500
12.437
48.000
6.750
27.750

26.000
4.724
18.000
17.725
15.513
32.500
66.500
70.000
10.687
17.350
5.000
11.125
13.875
18.875
26.875
62.250
23.260
25.750
38.000
18.832
15.279
11.024
91.000
112.500
39.000
27.090
58.875
14.375
24.954
37.375
18.875
31.000
9.187
67.250
34.187
21.187
25.250
6.375
7.500
29.375
26.625
26.812
11.250
6.000
23.250
22.827
56.500
55.000
14.000
49.500
8.250
28.875

WIDTH
0.750
0.500
0.812
0.750
0.750
0.562
0.812
0.750
0.750
0.500
0.375
0.625
0.625
0.812
0.750
0.500
0.812
0.500
0.500
0.750
0.750
0.500
0.812
0.812
0.812
0.750
0.750
0.500
0.812
0.812
0.750
0.500
0.750
0.812
0.812
0.812
0.750
0.500
0.437
0.812
0.500
0.812
0.625
0.437
0.812
0.812
0.750
0.750
0.750
0.750
0.500
0.562

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-29

Oil Seals by Model Number

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-9421
25003-9427
25003-9435
25003-9440
25003-9458
25003-9473
25003-9476
25003-9477
25003-9478
25003-9479
25003-9480
25003-9482
25003-9483
25003-9484
25003-9487
25003-9491
25003-9492
25003-9493
25003-9494
25003-9495
25003-9510
25003-9512
25003-9519
25003-9520
25003-9529
25003-9535
25003-9536
25003-9539
25003-9541
25003-9542
25003-9544
25003-9545
25003-9547
25003-9548
25003-9549
25003-9553
25003-9554
25003-9559
25003-9567
25003-9568
25003-9569
25003-9575
25003-9578
25003-9581
25003-9591
25003-9594
25003-9595
25003-9598
25003-9599
25003-9600
25003-9601
25003-9602

17.625
55.000
9.448
5.750
6.000
8.187
10.250
18.750
20.250
17.716
22.834
28.125
5.000
16.187
3.922
11.812
18.818
31.500
14.687
14.500
2.687
14.100
1.937
8.000
16.733
10.875
9.500
3.312
5.125
10.875
9.375
49.250
3.712
8.375
41.625
9.062
37.500
8.750
4.331
41.000
25.750
28.250
8.000
17.750
14.750
9.625
15.750
13.000
63.000
4.437
17.500
39.000

19.625
57.000
11.024
7.202
7.452
9.687
11.250
20.250
21.250
19.716
24.834
29.250
6.375
18.187
4.922
13.312
20.818
32.500
16.187
16.375
3.687
15.600
2.750
9.592
18.700
12.875
11.500
4.125
6.625
12.625
10.625
50.750
4.712
9.375
43.625
10.562
39.500
9.875
5.512
43.000
27.750
30.250
8.875
18.750
16.750
11.625
17.250
15.000
65.000
6.000
19.500
40.000

0.812
0.812
0.787
0.734
0.734
0.500
0.500
0.812
0.500
0.812
0.812
0.562
0.750
0.812
0.500
0.750
0.812
0.500
0.750
0.812
0.375
0.750
0.406
0.609
0.788
0.578
0.578
0.438
0.484
0.750
0.500
0.750
0.500
0.500
0.812
0.750
0.812
0.687
0.500
0.812
0.812
0.812
0.437
0.500
0.812
0.812
0.750
0.625
0.812
0.594
0.812
0.500

MODEL NO
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

PART NO

SHAFT

BORE

WIDTH

25003-9603
25003-9614
25003-9625
25003-9626
25003-9630
25003-9639
25003-9640
25003-9641
25003-9642
25003-9644
25003-9645
25003-9646
25003-9647
25003-9648
25003-9649
25003-9662
25003-9663
25003-9672
25003-9676
25003-9679
25003-9686
25003-9687
25003-9690
25003-9691
25003-9693
25003-9697
25003-9702
25003-9703
25003-9704
25003-9710
25003-9718
25003-9721
25003-9724
25003-9726
25003-9732
25003-9734
25003-9735
25003-9736
25003-9741
25003-9742
25003-9744
25003-9749
25003-9751
25003-9752
25003-9757
25003-9759
25003-9760
25003-9761
25003-9763
25003-9776
25003-9777
25003-9779

28.000
3.375
42.750
26.687
6.281
21.260
4.250
38.750
5.250
19.000
35.500
3.937
26.750
4.000
3.000
4.000
5.687
4.450
9.844
10.500
42.500
14.125
27.875
2.500
11.000
13.000
5.000
6.062
3.167
91.340
8.500
11.750
3.000
11.750
14.625
19.375
40.500
31.500
4.000
18.875
20.866
11.875
5.906
16.750
16.375
26.250
5.562
4.321
14.000
10.437
41.250
52.000

30.000
4.500
43.750
28.687
7.299
23.228
5.702
40.750
6.750
20.204
37.500
5.062
28.750
5.131
4.375
5.000
7.187
5.692
11.020
11.625
44.500
15.625
29.875
3.375
12.000
14.734
5.875
7.687
4.167
92.840
10.410
13.750
4.250
13.750
16.125
21.375
41.500
33.000
5.031
20.875
22.866
13.875
6.906
18.750
18.375
28.250
6.562
5.195
16.000
11.937
43.250
54.000

0.822
0.375
0.375
0.812
0.375
0.812
0.484
0.812
0.687
0.531
0.812
0.375
0.812
0.375
0.375
0.437
0.500
0.500
0.500
0.547
0.812
0.750
0.812
0.375
0.500
0.703
0.375
0.500
0.500
0.750
0.812
0.625
0.625
0.625
0.750
0.812
0.500
0.750
0.375
0.812
0.812
0.750
0.500
0.812
0.812
0.812
0.500
0.500
0.625
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-30

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-9780
25003-9781
25003-9783
25003-9785
25003-9789
25003-9791
25003-9792
25003-9793
25003-9796
25003-9797
25003-9800
25003-9801
25003-9805
25003-9806
25003-9817
25003-9820
25003-9823
25003-9824
25003-9828
25003-9829
25003-9830
25003-9839
25003-9842
25003-9843
25003-9846
25003-9847
25003-9848
25003-9851
25003-9852
25003-9853
25003-9858
25003-9859
25003-9861
25003-9862
25003-9864
25003-9869
25003-9874
25003-9875
25003-9877
25003-9878
25003-9880
25003-9881
25003-9888
25003-9889
25003-9890
25003-9893
25003-9894
25003-9895
25003-9896
25003-9897
25003-9899
25003-9900

6.500
58.000
13.937
4.375
6.299
4.937
7.437
11.808
15.350
28.875
68.500
20.062
7.062
65.354
3.812
50.000
6.437
4.000
6.687
11.250
3.218
4.750
4.562
59.250
7.437
22.875
49.000
4.000
29.000
31.000
7.086
20.500
7.812
4.312
21.691
75.000
8.062
9.250
4.125
42.062
5.875
18.500
9.562
8.312
27.992
20.625
47.875
7.620
14.937
68.968
52.875
40.750

7.500
60.000
15.437
5.827
7.299
6.062
8.937
13.308
16.850
30.875
70.500
22.062
8.562
67.354
5.312
52.000
7.937
5.031
8.007
12.250
4.468
5.937
5.437
61.250
8.687
24.875
51.000
4.937
30.125
32.125
8.586
21.500
9.062
5.312
23.691
77.000
9.312
11.250
5.250
44.062
7.125
20.000
10.812
9.562
29.119
22.625
49.875
9.120
16.437
70.957
53.875
42.000

WIDTH
0.562
0.812
0.750
0.484
0.500
0.500
0.750
0.750
0.750
0.812
0.812
0.812
0.750
0.812
0.500
0.812
0.625
0.500
0.625
0.625
0.500
0.500
0.375
0.812
0.625
0.812
0.812
0.375
0.500
0.500
0.750
0.469
0.625
0.375
0.812
0.812
0.625
0.812
0.407
0.812
0.455
0.750
0.625
0.625
0.500
0.812
0.812
0.750
0.750
0.787
0.500
0.750

MODEL NO

PART NO

SHAFT

BORE

23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23

25003-9902
25003-9904
25003-9906
25003-9907
25003-9908
25003-9912
25003-9913
25003-9914
25003-9915
25003-9916
25003-9917
25003-9918
25003-9919
25003-9920
25003-9921
25003-9925
25003-9928
25003-9932
25003-9938
25003-9939
25003-9940
25003-9941
25003-9942
25003-9943
25003-9944
25003-9945
25003-9947
25003-9948
25003-9949
25003-9950
25003-9953
25003-9954
25003-9955
25003-9956
25003-9957
25003-9958
25003-9959
25003-9960
25003-9963
25003-9968
25003-9969
25003-9974
25003-9976
25003-9979
25003-9980
25003-9982
25003-9983
25003-9985
25003-9987
25003-9988
25003-9993
25003-9994

108.000
38.500
15.125
21.500
44.290
54.000
40.750
5.687
3.000
9.437
56.102
44.337
54.331
70.000
13.625
17.717
12.380
10.937
51.575
6.375
18.750
9.445
11.335
19.188
3.437
71.000
9.750
9.000
13.125
4.156
88.583
3.375
7.937
7.207
10.000
6.670
14.750
4.250
3.543
32.375
9.844
10.937
11.750
18.750
11.750
25.006
20.495
20.477
20.458
25.500
14.566
7.087

110.000
40.750
17.125
23.500
45.790
56.000
42.000
6.937
4.000
10.937
58.346
45.837
56.299
71.000
15.625
19.409
14.380
12.187
53.575
7.375
20.750
10.633
12.520
20.938
4.937
73.000
11.750
11.000
14.875
5.406
90.583
4.625
9.187
8.225
11.500
7.750
16.250
5.250
4.528
34.375
10.844
12.500
13.500
19.750
13.250
26.006
21.495
21.477
21.458
26.500
16.181
8.661

WIDTH
0.812
0.750
0.750
0.750
0.750
0.812
0.687
0.625
0.437
0.750
0.750
0.750
0.984
0.500
0.812
0.787
0.812
0.625
0.812
0.375
0.812
0.500
0.500
0.625
0.500
0.812
0.625
0.625
0.625
0.500
0.812
0.375
0.625
0.500
0.375
0.500
0.375
0.437
0.472
1.000
0.500
0.625
0.812
0.500
0.625
0.375
0.375
0.375
0.375
0.500
0.629
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-31

Oil Seals by Model Number

MODEL NO
23
23
23
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24

Garlock

PART NO

SHAFT

BORE

WIDTH

25003-9995
25003-9996
25003-9997
25005-2549
25005-2608
25005-2612
25005-2669
25005-2762
25005-2765
25005-2810
25005-2879
25005-2882
25005-3071
25005-3188
25005-3240
25005-3287
25005-3367
25005-3996
25005-4071
25005-4098
25005-4152
25005-4963
25005-5139
25005-5526
25005-5630
25005-5741
25005-5933
25005-6247
25005-6250
25005-6370
25005-6375
25005-6380
25005-6395
25005-6693
25005-6758
25005-6773
25005-6845
25005-7578
25005-7758
25005-7861
25005-7867
25005-7876
25005-8169
25005-8171
25005-8173
25005-8245
25005-8452
25005-8623
25005-8665
25005-9035
25005-9085
25005-9108

9.868
12.992
10.375
4.000
4.125
4.125
4.250
4.500
4.500
4.625
4.875
4.875
5.250
5.500
5.625
5.750
6.000
10.000
12.000
13.000
15.000
10.562
6.625
5.511
7.625
3.740
3.562
8.250
3.741
6.500
7.000
8.000
11.000
16.000
10.437
7.500
8.750
3.500
8.000
8.125
4.937
11.937
6.125
6.500
7.125
3.000
8.375
8.469
8.500
21.500
4.437
9.000

11.368
14.566
12.250
5.500
5.375
5.625
5.750
5.875
6.000
6.125
6.250
6.375
6.750
7.000
7.125
7.250
7.500
12.000
14.000
15.000
16.500
12.562
8.125
7.011
9.125
4.990
4.812
9.750
5.240
8.000
8.500
9.000
13.000
18.000
12.437
9.000
10.250
4.750
9.500
9.625
6.437
13.937
7.625
7.874
8.625
4.250
9.875
9.968
10.000
23.500
5.937
10.375

0.750
0.708
0.750
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.750
0.750
0.750
0.750
0.750
0.500
0.500
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.750
0.500
0.750
0.500
0.500
0.375
0.500
0.500
0.500
0.750
0.500
0.472
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.500

MODEL NO
24
24
24
24
24
24
24
24
24
24
24
24
24
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25

PART NO

SHAFT

BORE

WIDTH

25005-9132
25005-9206
25005-9244
25005-9663
25005-9798
25005-9926
25005-9930
25005-9933
25005-9934
25005-9935
25005-9937
25005-9951
25005-9952
25058-0049
25058-0353
25058-0427
25058-0439
25058-0544
25058-0546
25058-0655
25058-1189
25058-1204
25058-1205
25058-1321
25058-1404
25058-1494
25058-1575
25058-1637
25058-1807
25058-1809
25058-1939
25058-1945
25058-2152
25058-2154
25058-2168
25058-2176
25058-2188
25058-2192
25058-2324
25058-2366
25058-2372
25058-2462
25058-2543
25058-2549
25058-2657
25058-2708
25058-2753
25058-2765
25058-2798
25058-2915
25058-2918
25058-2921

4.500
5.314
7.062
5.687
7.750
4.000
5.000
6.375
7.875
8.375
12.875
6.693
5.906
0.500
1.125
1.250
1.250
1.375
1.375
1.500
2.000
2.000
2.000
2.125
2.187
2.250
2.312
2.375
2.500
2.500
2.625
2.625
2.937
2.937
3.000
3.000
3.000
3.000
3.375
3.500
3.500
3.750
4.000
4.000
4.250
4.375
4.500
4.500
4.625
5.000
5.000
5.000

6.000
6.814
8.562
7.187
9.250
5.250
6.563
7.750
9.375
10.000
15.000
8.193
7.405
1.000
1.750
2.000
2.250
2.250
2.250
2.500
2.750
3.000
3.000
2.875
3.000
3.250
3.250
3.375
3.250
3.250
3.500
3.623
4.003
4.003
3.751
4.003
4.500
4.750
4.500
4.500
4.750
4.750
5.250
5.500
5.250
5.375
5.500
6.000
5.625
6.000
6.125
6.250

0.375
0.500
0.500
0.500
0.500
0.375
0.500
0.472
0.500
0.500
0.750
0.500
0.500
0.312
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.437
0.375
0.500
0.500
0.500
0.468
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-32

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25

25058-2923
25058-2973
25058-2990
25058-3059
25058-3065
25058-3122
25058-3176
25058-3188
25058-3275
25058-3278
25058-3316
25058-3355
25058-3363
25058-3367
25058-3369
25058-3370
25058-3375
25058-3380
25058-3405
25058-3430
25058-3438
25058-3464
25058-3480
25058-3485
25058-3496
25058-3497
25058-3500
25058-3501
25058-3515
25058-3522
25058-3526
25058-3552
25058-3566
25058-3578
25058-3584
25058-3596
25058-3619
25058-3630
25058-3652
25058-3672
25058-3673
25058-3689
25058-3692
25058-3693
25058-3741
25058-3745
25058-3965
25058-3967
25058-3979
25058-3989
25058-4012
25058-4032

5.000
5.000
5.125
5.250
5.250
5.375
5.500
5.500
5.750
5.750
5.875
6.000
6.000
6.000
6.000
6.000
6.125
6.125
6.250
6.500
6.625
6.750
6.875
6.875
7.000
7.000
7.000
7.000
7.125
7.250
7.125
7.500
7.625
7.750
7.875
8.000
9.000
9.250
9.750
10.000
10.000
10.750
11.000
11.000
18.000
18.500
9.250
9.250
9.500
9.750
10.500
10.875

6.250
6.437
6.125
6.250
6.500
6.375
6.500
7.000
6.750
6.875
6.875
7.000
7.250
7.500
7.500
7.500
7.125
7.250
7.750
7.750
7.750
8.250
8.250
8.500
8.250
8.250
8.500
8.500
8.625
8.500
8.750
9.000
9.125
9.250
9.125
9.250
10.500
10.500
11.000
11.500
12.000
12.750
12.250
12.500
19.500
20.500
11.000
11.250
11.000
11.750
12.000
12.375

WIDTH
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.625
0.750
0.500
0.625
0.750
0.625
0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.750
0.750
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.750
0.750
1.000
1.000
0.625
0.625
0.750
1.000
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO

PART NO

SHAFT

BORE

25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25

25058-4046
25058-4050
25058-4058
25058-4072
25058-4080
25058-4082
25058-4132
25058-4152
25058-4155
25058-4178
25058-4189
25058-4201
25058-4495
25058-4502
25058-4505
25058-4517
25058-4557
25058-4560
25058-4651
25058-4707
25058-4710
25058-4729
25058-4799
25058-4804
25058-4921
25058-4923
25058-5023
25058-5189
25058-5240
25058-5825
25058-5916
25058-5934
25058-6050
25058-6147
25058-6285
25058-6356
25058-6360
25058-6363
25058-6372
25058-6374
25058-6375
25058-6376
25058-6377
25058-6380
25058-6387
25058-6408
25058-6471
25058-6502
25058-6508
25058-6525
25058-6672
25058-6676

11.250
11.375
11.500
12.000
12.500
12.500
14.000
15.000
15.000
16.000
17.000
17.750
10.500
8.500
9.000
9.750
3.000
6.500
4.000
12.000
3.437
6.125
8.375
3.000
7.375
10.000
3.000
5.125
2.375
13.625
8.500
10.500
0.625
5.062
3.500
3.250
4.000
4.500
6.750
7.000
7.000
7.250
7.250
8.000
9.000
18.500
2.750
1.250
19.000
4.687
11.250
9.250

12.750
12.875
13.000
14.000
14.000
14.500
15.500
16.500
17.000
17.500
18.500
19.750
12.000
10.000
10.250
11.250
4.000
7.500
5.000
13.500
5.000
7.625
9.875
4.250
8.375
11.250
4.000
6.125
4.000
14.875
10.500
11.750
1.375
6.375
4.375
4.250
5.000
5.500
7.750
8.000
8.500
8.250
8.500
9.000
10.000
20.500
3.750
2.500
21.000
5.687
12.500
10.250

WIDTH
0.750
0.750
0.750
0.812
0.750
0.750
0.750
0.750
0.750
0.750
0.750
1.000
0.625
0.625
0.625
0.625
0.500
0.500
0.500
0.625
0.500
0.750
0.625
0.500
0.500
0.500
0.375
0.375
0.500
0.750
0.625
0.625
0.250
0.562
0.500
0.375
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.812
0.500
0.375
0.812
0.500
0.625
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-33

Oil Seals by Model Number

MODEL NO
25
25
25
25
25
25
25
25
25
25
25
25
25
25
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

Garlock

PART NO

SHAFT

BORE

WIDTH

25058-6697
25058-6808
25058-6919
25058-6974
25058-7033
25058-7293
25058-7389
25058-7432
25058-7621
25058-8782
25058-9104
25058-9207
25058-9665
25058-9915
24600-0041
24600-0044
24600-0055
24600-0126
24600-0131
24600-0212
24600-0233
24600-0287
24600-0303
24600-0351
24600-0353
24600-0378
24600-0383
24600-0393
24600-0449
24600-0532
24600-0547
24600-0549
24600-0556
24600-0575
24600-0598
24600-0609
24600-0622
24600-0631
24600-0634
24600-0635
24600-0639
24600-0643
24600-0644
24600-0672
24600-0674
24600-0698
24600-0705
24600-0708
24600-0733
24600-0737
24600-0741
24600-0754

16.500
10.000
4.375
18.000
0.750
1.000
3.750
10.625
9.875
5.437
3.687
8.500
4.000
3.000
9.250
9.250
9.500
11.500
11.750
14.000
14.375
1.000
1.000
1.125
1.125
1.181
1.188
1.181
1.260
33.500
1.375
35.500
1.375
1.378
1.438
1.438
1.875
1.250
1.438
1.500
1.750
1.500
1.500
5.750
5.875
1.562
1.375
1.375
1.575
1.438
1.438
1.375

18.500
11.250
5.875
20.500
1.250
1.500
4.750
11.875
10.875
6.937
4.687
9.750
5.500
4.000
10.500
11.250
11.500
13.000
13.250
15.500
16.000
1.500
2.062
1.625
1.750
1.968
1.875
2.500
1.693
36.000
2.375
37.500
2.500
2.244
2.375
2.500
2.875
2.250
2.438
2.500
2.750
2.250
2.250
6.750
6.875
2.188
2.064
2.439
2.362
2.125
2.250
2.500

0.750
0.625
0.375
0.812
0.250
0.281
0.375
0.625
0.500
0.750
0.500
0.750
0.750
0.437
0.625
0.750
0.625
0.625
0.625
0.625
0.688
0.313
0.375
0.313
0.375
0.276
0.375
0.375
0.394
0.875
0.375
0.875
0.375
0.394
0.375
0.500
0.312
0.500
0.500
0.500
0.500
0.375
0.438
0.500
0.500
0.312
0.500
0.500
0.354
0.375
0.500
0.625

MODEL NO
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

PART NO

SHAFT

BORE

WIDTH

24600-0758
24600-0759
24600-0760
24600-0778
24600-0784
24600-0785
24600-0791
24600-0795
24600-0800
24600-0809
24600-0814
24600-0817
24600-0827
24600-0828
24600-0829
24600-0831
24600-0833
24600-0834
24600-0835
24600-0839
24600-0840
24600-0841
24600-0842
24600-0845
24600-0874
24600-0876
24600-0898
24600-0904
24600-0913
24600-0914
24600-0933
24600-0973
24600-0976
24600-0978
24600-0983
24600-0985
24600-0992
24600-0994
24600-1002
24600-1007
24600-1039
24600-1040
24600-1060
24600-1063
24600-1067
24600-1068
24600-1096
24600-1097
24600-1103
24600-1104
24600-1111
24600-1114

1.625
1.653
1.625
1.625
0.875
0.938
1.653
2.750
10.000
9.000
1.125
1.125
2.953
9.448
2.519
37.000
1.687
1.688
1.688
3.375
1.688
4.527
1.125
2.781
1.500
1.625
1.750
1.750
1.378
3.125
4.250
1.812
1.812
4.000
18.000
12.000
14.173
4.724
1.812
15.000
1.875
10.826
6.494
1.875
1.875
8.250
1.653
1.772
1.969
1.969
1.938
1.937

2.188
2.165
2.375
2.750
1.500
1.500
2.165
3.500
12.000
10.500
2.062
3.192
3.937
12.598
3.464
39.250
2.561
2.502
2.500
4.250
2.625
5.708
2.001
3.500
3.000
2.875
2.438
2.500
3.465
4.250
5.375
2.500
2.625
5.000
20.000
13.750
15.354
5.708
3.544
17.500
2.750
12.008
7.525
3.000
3.543
10.250
2.441
2.441
3.150
2.756
2.500
2.625

0.375
0.354
0.375
0.375
0.375
0.375
0.393
0.250
1.000
0.500
0.375
0.500
0.512
0.984
0.472
0.875
0.500
0.375
0.375
0.375
0.500
0.551
0.375
0.375
0.500
0.500
0.375
0.375
0.500
0.500
0.500
0.375
0.375
0.375
0.625
0.688
0.709
0.433
0.500
1.250
0.500
0.591
0.517
0.375
0.375
0.750
0.315
0.394
0.315
0.394
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-34

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

24600-1120
24600-1124
24600-1125
24600-1126
24600-1130
24600-1137
24600-1139
24600-1149
24600-1155
24600-1157
24600-1173
24600-1182
24600-1190
24600-1191
24600-1195
24600-1198
24600-1204
24600-1206
24600-1217
24600-1224
24600-1228
24600-1234
24600-1258
24600-1259
24600-1260
24600-1261
24600-1275
24600-1276
24600-1277
24600-1282
24600-1283
24600-1285
24600-1288
24600-1289
24600-1290
24600-1295
24600-1296
24600-1297
24600-1298
24600-1301
24600-1302
24600-1305
24600-1319
24600-1320
24600-1321
24600-1325
24600-1332
24600-1333
24600-1334
24600-1345
24600-1355
24600-1375

1.937
1.938
1.938
1.938
1.938
1.937
1.378
1.938
1.962
1.963
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.062
1.575
1.562
2.062
5.935
2.062
2.062
0.875
0.875
0.875
0.969
1.000
1.062
1.125
1.125
1.125
1.250
1.250
1.312
1.375
1.625
1.625
1.687
2.125
2.125
2.125
2.125
15.748
2.125
2.125
2.125
2.125
3.375

2.750
2.996
3.000
3.188
2.875
3.000
2.047
3.188
3.188
3.544
2.715
3.375
2.750
2.750
2.783
2.875
3.000
3.000
3.188
2.875
2.559
2.250
3.000
6.963
3.000
3.062
1.375
1.828
1.625
2.000
1.750
1.625
1.828
1.984
2.844
2.125
2.438
2.062
2.688
2.438
2.687
2.750
2.833
2.875
2.875
3.000
17.480
3.125
3.125
3.250
3.545
4.355

WIDTH
0.375
0.438
0.437
0.469
0.437
0.500
0.276
0.500
0.469
0.500
0.438
0.375
0.438
0.500
0.375
0.375
0.375
0.500
0.438
0.468
0.276
0.375
0.375
0.517
0.500
0.375
0.375
0.438
0.375
0.375
0.375
0.375
0.375
0.438
0.500
0.375
0.438
0.375
0.500
0.375
0.500
0.437
0.438
0.437
0.375
0.500
0.787
0.375
0.438
0.375
0.438
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

24600-1394
24600-1404
24600-1408
24600-1427
24600-1431
24600-1454
24600-1465
24600-1466
24600-1469
24600-1470
24600-1474
24600-1482
24600-1492
24600-1504
24600-1508
24600-1509
24600-1511
24600-1561
24600-1565
24600-1568
24600-1572
24600-1579
24600-1580
24600-1602
24600-1621
24600-1623
24600-1627
24600-1639
24600-1642
24600-1652
24600-1665
24600-1668
24600-1685
24600-1686
24600-1697
24600-1705
24600-1714
24600-1716
24600-1746
24600-1749
24600-1757
24600-1767
24600-1775
24600-1787
24600-1794
24600-1801
24600-1820
24600-1821
24600-1826
24600-1828
24600-1829
24600-1838

1.125
2.188
2.188
2.188
1.187
1.375
1.438
1.438
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.312
2.362
2.363
2.375
1.772
2.375
2.344
2.437
2.499
2.563
2.375
2.375
2.375
3.500
2.375
2.440
2.500
4.438
5.250
7.313
7.441
2.438
2.438
2.489
1.750
8.000
2.500
2.500
2.500
2.500
2.500
2.500
2.500
1.375
2.625

1.875
3.000
3.125
3.350
2.250
2.000
2.000
2.063
2.875
3.062
3.000
3.125
3.250
3.500
3.353
3.375
3.750
3.125
3.071
3.127
3.188
2.622
3.250
3.125
3.547
3.542
3.500
3.062
3.125
3.375
6.375
3.500
3.250
3.125
5.750
7.250
8.438
9.875
3.481
3.500
3.250
2.750
8.875
3.350
4.000
3.188
3.500
3.500
3.623
3.750
2.125
3.375

0.375
0.500
0.375
0.469
0.500
0.312
0.313
0.313
0.312
0.437
0.375
0.500
0.375
0.375
0.375
0.500
0.500
0.375
0.394
0.375
0.438
0.500
0.328
0.500
0.500
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.500
0.312
0.563
0.625
0.563
0.512
0.500
0.500
0.312
0.375
0.437
0.250
0.500
0.375
0.437
0.500
0.437
0.375
0.375
0.437

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-35

Oil Seals by Model Number

MODEL NO
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

Garlock

PART NO

SHAFT

BORE

WIDTH

24600-1842
24600-1848
24600-1855
24600-1907
24600-1913
24600-1914
24600-1922
24600-1939
24600-1950
24600-1952
24600-1968
24600-1972
24600-1987
24600-2004
24600-2007
24600-2020
24600-2021
24600-2033
24600-2035
24600-2037
24600-2039
24600-2041
24600-2044
24600-2047
24600-2054
24600-2058
24600-2065
24600-2068
24600-2070
24600-2071
24600-2077
24600-2081
24600-2098
24600-2105
24600-2111
24600-2113
24600-2114
24600-2120
24600-2121
24600-2128
24600-2137
24600-2144
24600-2145
24600-2146
24600-2147
24600-2148
24600-2149
24600-2151
24600-2168
24600-2171
24600-2174
24600-2180

2.625
2.688
4.724
3.937
8.500
8.875
9.750
2.625
2.625
27.000
3.537
2.000
2.688
2.687
12.375
2.750
2.750
2.750
2.750
2.750
2.750
9.449
9.469
5.315
2.750
2.750
2.750
2.750
2.756
2.756
2.795
2.938
5.512
2.953
3.225
2.875
2.875
2.875
2.875
1.250
2.901
2.937
7.402
2.938
8.189
10.787
9.528
2.937
3.000
3.000
3.000
3.000

3.625
3.875
5.512
4.921
9.750
10.125
11.125
3.500
3.750
28.500
4.500
2.750
3.372
3.751
13.375
3.375
4.625
3.751
3.500
3.500
3.543
11.024
10.625
6.614
3.625
3.750
4.003
4.125
3.543
3.543
3.465
4.008
7.087
4.213
3.975
4.000
3.500
3.751
3.875
2.000
3.601
3.625
8.583
3.750
9.370
11.969
10.709
3.875
3.751
3.876
4.003
4.250

0.438
0.468
0.512
0.256
0.750
0.750
0.750
0.375
0.500
0.750
0.500
0.375
0.375
0.500
0.500
0.312
0.625
0.687
0.375
0.500
0.437
0.591
0.625
0.709
0.438
0.438
0.469
0.438
0.394
0.237
0.472
0.468
0.630
0.492
0.375
0.468
0.312
0.500
0.375
0.375
0.232
0.375
0.591
0.375
0.591
0.591
0.591
0.500
0.375
0.375
0.375
0.500

MODEL NO
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

PART NO

SHAFT

BORE

WIDTH

24600-2186
24600-2187
24600-2198
24600-2214
24600-2215
24600-2218
24600-2225
24600-2237
24600-2238
24600-2243
24600-2262
24600-2265
24600-2267
24600-2269
24600-2274
24600-2297
24600-2305
24600-2310
24600-2318
24600-2319
24600-2321
24600-2324
24600-2345
24600-2348
24600-2356
24600-2364
24600-2366
24600-2368
24600-2377
24600-2412
24600-2417
24600-2432
24600-2441
24600-2447
24600-2456
24600-2457
24600-2462
24600-2477
24600-2478
24600-2498
24600-2501
24600-2504
24600-2505
24600-2511
24600-2513
24600-2514
24600-2525
24600-2546
24600-2555
24600-2562
24600-2580
24600-2590

3.000
3.000
3.000
3.346
3.150
3.188
3.125
3.125
3.150
3.150
3.250
3.250
3.187
3.250
2.756
3.312
3.312
3.346
3.375
3.375
3.375
3.375
3.437
3.438
3.438
3.500
3.500
3.500
3.500
3.625
3.625
3.625
3.687
3.688
1.750
3.543
3.750
3.750
3.750
3.812
22.598
19.685
24.567
19.983
3.875
3.875
3.937
4.000
4.000
3.307
13.250
4.000

4.500
4.125
5.000
4.331
4.134
4.340
4.125
4.625
3.937
4.330
4.000
4.000
5.000
4.125
4.331
4.375
5.000
4.134
4.626
5.000
4.375
4.500
4.500
4.625
4.875
4.375
4.500
4.500
4.500
4.750
4.625
5.250
4.750
4.999
2.625
4.724
4.750
5.000
5.000
5.500
23.779
20.866
25.748
21.125
5.375
5.000
5.250
5.375
5.750
4.331
14.750
4.875

0.500
0.437
0.500
0.472
0.512
0.305
0.500
0.500
0.512
0.237
0.250
0.438
0.500
0.562
0.500
0.500
0.468
0.500
0.563
0.469
0.500
0.500
0.500
0.500
0.625
0.375
0.500
0.625
0.437
0.625
0.500
0.500
0.500
0.500
0.312
0.511
0.500
0.438
0.500
0.500
0.590
0.590
0.590
0.625
0.500
0.468
0.500
0.500
0.500
0.551
0.688
0.563

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-36

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

24600-2591
24600-2592
24600-2593
24600-2595
24600-2600
24600-2601
24600-2603
24600-2612
24600-2621
24600-2644
24600-2646
24600-2653
24600-2657
24600-2664
24600-2686
24600-2712
24600-2731
24600-2732
24600-2753
24600-2759
24600-2761
24600-2763
24600-2765
24600-2788
24600-2798
24600-2802
24600-2820
24600-2822
24600-2837
24600-2840
24600-2841
24600-2845
24600-2851
24600-2853
24600-2875
24600-2879
24600-2881
24600-2886
24600-2889
24600-2900
24600-2913
24600-2915
24600-2921
24600-2922
24600-2923
24600-2928
24600-2932
24600-2940
24600-2988
24600-2990
24600-2998
24600-3019

4.000
4.000
4.000
4.000
4.125
4.063
4.125
4.125
1.969
4.188
4.188
4.250
4.250
4.250
4.331
4.375
4.331
4.438
4.500
4.500
4.500
4.500
4.500
4.562
4.625
4.625
4.688
20.500
4.750
4.750
4.750
4.750
4.750
4.750
4.875
4.875
4.875
4.875
4.921
4.928
4.987
5.000
5.000
5.000
5.000
5.000
5.000
6.679
5.118
5.125
5.125
5.500

4.875
5.000
5.000
5.250
5.125
5.500
5.250
5.625
4.331
5.250
5.250
5.000
5.250
5.500
5.118
5.500
5.512
5.500
5.500
5.750
5.750
5.250
6.000
5.750
5.625
5.750
5.750
21.500
5.750
5.875
5.500
6.000
6.250
6.500
6.000
6.250
6.250
6.250
6.299
6.250
6.000
6.000
6.250
6.250
6.250
6.500
5.750
7.405
6.299
6.125
6.375
6.375

WIDTH
0.625
0.468
0.625
0.468
0.500
0.563
0.500
0.500
0.375
0.468
0.625
0.438
0.500
0.562
0.512
0.562
0.512
0.500
0.500
0.500
0.625
0.375
0.500
0.562
0.500
0.562
0.500
0.469
0.500
0.500
0.375
0.625
0.625
0.625
0.625
0.500
0.625
0.858
0.590
0.500
0.500
0.500
0.500
0.562
0.625
0.562
0.437
0.250
0.590
0.500
0.625
0.563

MODEL NO

PART NO

SHAFT

BORE

26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

24600-3026
24600-3037
24600-3050
24600-3055
24600-3059
24600-3067
24600-3122
24600-3124
24600-3135
24600-3136
24600-3173
24600-3176
24600-3177
24600-3182
24600-3183
24600-3184
24600-3189
24600-3194
24600-3203
24600-3204
24600-3216
24600-3236
24600-3260
24600-3277
24600-3281
24600-3283
24600-3287
24600-3300
24600-3308
24600-3326
24600-3329
24600-3330
24600-3354
24600-3361
24600-3362
24600-3373
24600-3377
24600-3379
24600-3389
24600-3390
24600-3404
24600-3415
24600-3418
24600-3422
24600-3423
24600-3424
24600-3430
24600-3435
24600-3438
24600-3451
24600-3452
24600-3460

5.188
3.688
15.000
17.250
5.250
5.250
5.375
5.375
6.625
7.750
5.438
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.512
5.512
2.500
5.625
4.331
5.750
5.750
5.750
5.750
2.312
1.937
6.102
6.693
5.875
6.000
6.000
6.000
6.000
6.125
6.000
6.000
6.188
6.300
3.187
6.125
6.125
6.375
6.437
6.500
6.500
6.625
6.693
7.000
6.750

6.250
4.750
17.500
19.250
6.250
6.500
6.375
6.750
8.750
10.250
6.625
6.500
6.250
6.750
6.750
6.750
7.000
7.250
6.693
6.890
3.228
6.875
5.118
6.750
7.000
7.000
6.950
3.062
3.250
6.850
8.268
7.375
7.000
7.250
7.000
7.625
7.125
7.500
7.500
7.688
7.480
4.500
7.625
9.000
7.875
7.687
7.750
8.000
7.725
7.874
8.000
8.000

WIDTH
0.500
0.438
0.938
0.875
0.500
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.438
0.500
0.562
0.625
0.750
0.500
0.295
0.709
0.315
0.625
0.354
0.625
0.500
0.625
0.305
0.375
0.375
0.472
0.630
0.625
0.438
0.500
0.750
0.625
0.625
0.375
0.625
0.750
0.295
0.500
0.625
1.438
0.625
0.625
0.625
0.750
0.305
0.295
0.437
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-37

Oil Seals by Model Number

MODEL NO
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

Garlock

PART NO

SHAFT

BORE

WIDTH

24600-3461
24600-3486
24600-3492
24600-3494
24600-3500
24600-3511
24600-3512
24600-3522
24600-3544
24600-3552
24600-3553
24600-3566
24600-3578
24600-3583
24600-3587
24600-3589
24600-3592
24600-3594
24600-3598
24600-3606
24600-3611
24600-3619
24600-3623
24600-3633
24600-3635
24600-3640
24600-3644
24600-3648
24600-3654
24600-3655
24600-3663
24600-3665
24600-3667
24600-3677
24600-3678
24600-3680
24600-3682
24600-3685
24600-3686
24600-3687
24600-3691
24600-3695
24600-3720
24600-3721
24600-3722
24600-3726
24600-3742
24600-3758
24600-3793
24600-3811
24600-3817
24600-3825

22.047
6.875
7.000
7.000
7.000
6.938
7.125
7.250
7.500
7.500
7.500
7.625
7.750
5.063
2.165
7.875
8.000
8.000
8.000
8.250
8.625
9.000
9.000
9.250
16.687
9.500
9.500
9.500
9.750
9.750
2.953
10.500
20.866
10.250
24.409
10.500
10.750
10.750
10.750
10.750
11.000
11.024
11.000
12.598
10.827
14.000
18.000
7.480
17.000
7.875
8.250
8.625

24.016
8.384
8.000
8.125
8.500
8.000
8.500
8.500
8.500
9.000
9.000
9.125
9.250
6.125
3.150
9.375
9.000
9.125
9.375
9.500
10.625
10.500
11.000
11.250
18.031
10.750
11.250
11.500
11.250
11.750
3.740
11.750
22.835
12.250
26.378
12.500
11.750
12.250
12.500
12.750
12.000
12.598
12.250
14.331
12.205
16.250
20.000
9.250
18.250
9.000
9.250
9.625

0.787
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.500
0.394
0.750
0.625
0.625
0.625
0.625
0.750
0.750
0.750
1.000
0.750
0.625
0.625
1.000
0.750
1.000
0.511
0.625
0.866
1.000
0.866
1.000
0.562
0.562
0.562
0.562
0.625
0.787
0.688
0.787
0.591
1.000
1.000
0.630
0.625
0.438
0.625
0.500

MODEL NO
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

PART NO

SHAFT

BORE

WIDTH

24600-3828
24600-3829
24600-3832
24600-3833
24600-3834
24600-3840
24600-3841
24600-3842
24600-3850
24600-3853
24600-3867
24600-3868
24600-3882
24600-3885
24600-3891
24600-3908
24600-3910
24600-3913
24600-3914
24600-3916
24600-3919
24600-3920
24600-3933
24600-3935
24600-3937
24600-3942
24600-3944
24600-3951
24600-3955
24600-3956
24600-3973
24600-3981
24600-3988
24600-3993
24600-3994
24600-4003
24600-4005
24600-4015
24600-4019
24600-4041
24600-4044
24600-4068
24600-4074
24600-4082
24600-4093
24600-4095
24600-4098
24600-4127
24600-4155
24600-4162
24600-4178
24600-4180

8.625
8.750
8.875
8.875
9.000
9.250
9.500
9.500
11.500
12.000
15.551
16.500
13.386
1.125
14.250
7.874
9.449
6.299
7.874
7.874
6.693
7.087
8.375
8.500
8.500
8.661
8.661
8.750
9.055
9.055
9.449
3.500
2.500
1.531
10.000
10.125
10.250
16.142
22.047
12.250
1.772
12.000
12.250
12.500
13.000
13.000
13.000
13.500
15.000
15.500
16.000
16.000

10.500
9.750
10.125
10.875
10.000
10.750
10.500
11.000
12.500
14.000
17.283
17.750
14.961
2.750
16.250
9.252
10.827
7.480
9.055
9.449
7.874
8.268
9.875
9.500
10.000
9.843
10.236
10.750
10.236
10.591
11.024
4.437
4.003
2.500
11.750
12.000
11.750
18.110
24.016
13.750
2.559
13.625
13.750
14.500
14.500
14.625
15.000
15.500
17.000
17.000
17.500
18.000

0.500
0.562
0.625
1.000
0.468
0.656
0.438
0.688
0.500
0.625
0.886
0.750
0.709
0.375
0.625
0.625
0.630
0.630
0.551
0.787
0.630
0.630
0.688
0.625
0.750
0.630
0.866
0.750
0.590
0.866
0.748
0.312
0.375
0.438
0.750
0.750
0.750
0.866
0.866
0.625
0.394
0.750
0.750
0.750
0.688
0.750
0.750
0.750
0.750
0.750
0.750
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-38

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

24600-4221
24600-4224
24600-4225
24600-4226
24600-4227
24600-4232
24600-4269
24600-4294
24600-4345
24600-4380
24600-4388
24600-4393
24600-4394
24600-4395
24600-4396
24600-4397
24600-4405
24600-4406
24600-4486
24600-4496
24600-4515
24600-4530
24600-4557
24600-4582
24600-4611
24600-4612
24600-4614
24600-4632
24600-4633
24600-4634
24600-4635
24600-4645
24600-4651
24600-4657
24600-4710
24600-4803
24600-4817
24600-4856
24600-4873
24600-4927
24600-4941
24600-4977
24600-4997
24600-5002
24600-5067
24600-5077
24600-5102
24600-5111
24600-5114
24600-5115
24600-5120
24600-5192

19.500
3.425
3.976
5.433
7.007
12.250
22.000
24.000
9.843
10.250
6.187
17.322
14.173
5.905
15.748
12.598
34.500
4.500
18.110
12.500
9.750
13.750
3.000
2.000
8.070
12.000
4.500
1.574
1.771
3.937
4.330
4.000
4.000
0.875
3.435
9.125
3.937
19.291
4.500
10.000
15.354
17.000
7.480
3.543
27.559
16.000
13.780
10.236
12.500
2.362
16.250
8.062

21.500
4.685
5.551
7.008
8.582
14.000
23.500
26.000
11.024
13.750
7.508
18.897
15.748
7.480
17.322
14.173
36.500
5.750
20.079
14.000
11.000
15.250
4.000
2.625
9.258
13.500
5.500
2.448
2.568
4.734
5.127
5.250
5.000
1.875
5.000
10.375
4.937
21.260
5.500
11.000
16.929
19.000
8.464
4.330
30.079
18.000
15.512
11.417
13.500
3.150
17.750
9.562

WIDTH
0.875
0.492
0.630
0.630
0.629
0.750
0.750
0.875
0.650
0.750
0.250
0.787
0.709
0.590
0.787
0.787
0.875
0.438
0.866
0.625
0.625
0.750
0.500
0.312
0.591
0.688
0.375
0.314
0.398
0.511
0.511
0.312
0.500
0.312
0.500
0.625
0.500
0.866
0.437
0.375
0.787
0.625
0.629
0.511
0.984
0.875
0.787
0.630
0.500
0.394
0.680
0.500

MODEL NO

PART NO

SHAFT

BORE

26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26

24600-5231
24600-5233
24600-5239
24600-5273
24600-5335
24600-5338
24600-5341
24600-5343
24600-5344
24600-5345
24600-5348
24600-5351
24600-5353
24600-5359
24600-5429
24600-5439
24600-5445
24600-5454
24600-5456
24600-5457
24600-5491
24600-5492
24600-5493
24600-5495
24600-5637
24600-5714
24600-5715
24600-5844
24600-5913
24600-5918
24600-5919
24600-5924
24600-5942
24600-5987
24600-6042
24600-6175
24600-6182
24600-6185
24600-6207
24600-6372
24600-6384
24600-6386
24600-6395
24600-6450
24600-6471
24600-6570
24600-6808
24600-6839
24600-6867
24600-7033
24600-7059
24600-7101

8.268
11.024
1.250
7.188
5.906
8.267
12.992
3.346
3.543
3.937
4.725
10.236
4.134
9.449
10.236
4.750
10.629
32.969
13.500
5.250
21.882
21.654
20.276
4.750
3.875
20.079
23.622
1.875
3.938
1.575
7.087
3.937
12.750
14.562
6.000
7.250
7.375
7.750
1.375
6.750
8.500
8.750
11.000
6.250
2.750
8.625
10.000
3.250
6.229
0.750
18.500
8.500

9.803
12.441
1.750
8.640
7.087
9.448
14.173
4.331
4.528
4.922
5.906
11.417
5.315
10.630
11.811
5.625
11.811
34.625
15.000
6.000
23.732
23.622
21.850
5.625
4.750
21.260
24.803
2.625
5.000
2.047
7.874
6.693
14.250
16.000
7.125
8.250
8.375
8.750
1.875
7.750
9.750
10.000
13.000
7.250
3.750
9.875
11.250
4.250
7.549
1.250
20.500
10.500

WIDTH
0.866
0.709
0.250
0.625
0.551
0.590
0.590
0.512
0.512
0.512
0.551
0.590
0.550
0.591
0.787
0.437
0.630
0.750
0.653
0.375
0.866
0.925
0.787
0.625
0.375
0.433
0.433
0.312
0.500
0.276
0.591
0.374
0.750
0.625
0.625
0.438
0.437
0.437
0.250
0.500
0.625
0.625
0.750
0.438
0.500
0.625
0.625
0.437
0.625
0.250
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-39

Oil Seals by Model Number

MODEL NO
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1

Garlock

PART NO

SHAFT

BORE

WIDTH

24600-7209
24600-7213
24600-7263
24600-7267
24600-7276
24600-7281
24600-7288
24600-7374
24600-7618
24600-7682
24600-7801
24600-7832
24600-7836
24600-8233
24600-8313
24600-8592
24600-8814
24600-8815
24600-8830
24600-9175
24600-9535
24600-9538
24600-9646
24600-9662
24600-9722
24600-9780
24600-9960
24620-0041
24620-0044
24620-0209
24620-0280
24620-0379
24620-0572
24620-0573
24620-0574
24620-0664
24620-0678
24620-0729
24620-0760
24620-0846
24620-0895
24620-0896
24620-0909
24620-0935
24620-0963
24620-0979
24620-1007
24620-1030
24620-1031
24620-1032
24620-1033
24620-1034

2.165
3.125
11.500
5.511
6.299
18.898
10.433
3.250
18.250
3.125
15.250
11.250
4.724
3.250
9.625
3.875
12.283
14.016
10.787
5.314
0.750
1.770
3.937
4.000
1.500
6.500
4.250
9.250
9.250
0.866
0.984
1.181
1.378
1.378
1.337
4.875
6.250
1.574
1.625
3.465
1.732
1.750
1.750
1.772
5.500
15.551
15.000
1.575
2.362
2.756
3.150
4.134

3.937
3.875
12.750
6.692
7.480
20.472
11.683
4.250
20.250
4.250
16.750
12.750
6.299
4.249
10.875
4.875
13.750
15.000
12.250
6.692
1.625
2.834
5.062
5.000
2.250
7.500
5.250
10.500
11.250
1.378
1.496
1.968
1.969
2.165
2.165
5.875
7.250
2.440
2.375
4.331
2.362
2.750
2.625
2.441
7.000
17.283
17.500
2.559
3.543
3.543
3.937
5.315

0.375
0.375
0.625
0.590
0.591
0.787
0.625
0.500
0.812
0.625
0.750
0.625
0.472
0.375
0.625
0.437
0.688
0.688
0.688
0.512
0.312
0.375
0.375
0.437
0.250
0.562
0.437
0.625
0.750
0.276
0.276
0.434
0.315
0.434
0.315
0.500
0.500
0.433
0.375
0.591
0.354
0.312
0.500
0.312
0.500
0.741
1.250
0.472
0.551
0.472
0.394
0.551

MODEL NO
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1

PART NO

SHAFT

BORE

WIDTH

24620-1035
24620-1036
24620-1037
24620-1038
24620-1079
24620-1106
24620-1107
24620-1108
24620-1109
24620-1189
24620-1201
24620-1258
24620-1321
24620-1355
24620-1369
24620-1370
24620-1371
24620-1575
24620-1605
24620-1606
24620-1642
24620-1686
24620-1726
24620-1735
24620-1819
24620-1837
24620-1857
24620-1859
24620-1953
24620-2026
24620-2027
24620-2034
24620-2035
24620-2037
24620-2054
24620-2058
24620-2122
24620-2135
24620-2177
24620-2187
24620-2215
24620-2216
24620-2217
24620-2279
24620-2420
24620-2432
24620-2437
24620-2494
24620-2554
24620-2621
24620-2669
24620-2703

6.299
7.480
11.811
16.535
1.890
1.969
1.968
1.969
1.937
2.000
2.000
2.062
2.125
2.125
2.165
2.165
2.165
2.312
2.362
2.362
2.375
2.500
2.437
2.437
2.500
9.645
2.375
2.559
1.969
2.756
2.755
4.331
2.750
2.750
2.750
2.750
2.156
17.992
3.000
3.000
3.150
3.125
3.125
4.528
3.625
3.625
3.543
3.938
4.000
1.969
3.188
4.331

7.677
8.858
13.583
18.898
2.750
2.441
2.834
2.677
3.548
2.750
2.997
3.000
2.878
3.545
2.835
3.070
3.070
3.250
2.953
3.228
3.125
3.125
3.147
3.250
3.500
12.007
3.372
3.464
3.543
3.346
3.622
5.118
3.500
3.500
3.625
3.750
4.725
20.000
4.125
4.125
4.134
4.249
4.506
5.512
4.751
5.250
4.330
4.881
4.875
4.331
4.999
5.512

0.709
0.630
0.866
1.102
0.470
0.276
0.472
0.354
0.375
0.375
0.375
0.375
0.375
0.438
0.315
0.472
0.354
0.500
0.315
0.472
0.375
0.312
0.375
0.375
0.375
0.984
0.438
0.472
0.394
0.315
0.472
0.472
0.375
0.500
0.438
0.438
0.375
0.748
0.500
0.438
0.512
0.438
0.500
0.472
0.500
0.500
0.472
0.625
0.500
0.375
0.438
0.551

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-40

Rev. 1/01

Garlock
MODEL NO
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1

Oil Seals by Model Number

PART NO

SHAFT

BORE

24620-2731
24620-2753
24620-2798
24620-2809
24620-2827
24620-2841
24620-2862
24620-2863
24620-2890
24620-2908
24620-2915
24620-2921
24620-2923
24620-2965
24620-2976
24620-2989
24620-3026
24620-3050
24620-3065
24620-3118
24620-3122
24620-3186
24620-3193
24620-3201
24620-3232
24620-3235
24620-3308
24620-3348
24620-3352
24620-3354
24620-3377
24620-3419
24620-3434
24620-3459
24620-3515
24620-3518
24620-3542
24620-3665
24620-3693
24620-3712
24620-3715
24620-3886
24620-3914
24620-3916
24620-3919
24620-3920
24620-3923
24620-3944
24620-3956
24620-3973
24620-3974
24620-3987

4.331
4.500
4.625
4.625
4.410
4.750
3.500
4.724
4.921
2.953
5.000
5.000
5.000
10.630
9.250
5.118
5.187
15.000
5.250
5.314
5.375
5.500
5.500
5.511
5.625
12.992
1.937
6.500
6.102
6.000
6.125
4.527
6.500
2.531
7.125
7.250
4.500
10.500
11.000
0.945
1.949
11.417
7.874
7.874
6.693
7.086
7.440
8.661
9.055
9.448
9.448
2.500

5.511
5.500
5.625
6.000
5.375
5.500
4.721
5.906
6.692
4.528
6.000
6.250
6.250
12.205
10.250
6.299
6.250
17.500
6.500
6.692
6.375
6.632
7.000
6.299
6.625
14.567
3.250
8.000
7.086
7.000
7.125
5.709
8.000
4.725
8.625
8.250
7.000
11.750
12.500
1.929
3.031
12.992
9.055
9.448
7.874
8.267
8.858
10.236
10.590
11.024
11.417
3.750

WIDTH
0.511
0.500
0.500
0.625
0.625
0.375
0.375
0.512
0.472
0.472
0.500
0.500
0.625
0.787
0.625
0.551
0.500
0.938
0.500
0.590
0.500
0.500
0.828
0.511
0.375
0.482
0.375
0.563
0.590
0.437
0.625
0.787
0.625
0.375
0.750
0.625
0.531
0.625
0.625
0.472
0.709
0.787
0.551
0.787
0.590
0.590
0.629
0.866
0.866
0.748
0.748
0.687

MODEL NO
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1
26R1

PART NO

SHAFT

BORE

24620-4006
24620-4008
24620-4020
24620-4021
24620-4071
24620-4129
24620-4155
24620-4228
24620-4269
24620-4549
24620-4620
24620-4654
24620-4946
24620-5010
24620-5018
24620-5146
24620-5335
24620-5338
24620-5339
24620-5344
24620-5345
24620-5349
24620-5354
24620-5357
24620-5359
24620-5451
24620-5456
24620-5465
24620-5466
24620-5467
24620-5468
24620-5758
24620-5844
24620-6061
24620-6117
24620-6370
24620-6374
24620-6709
24620-7059
24620-7164
24620-7276
24620-7277
24620-7383
24620-7388
24620-7394
24620-7396
24620-7654
24620-8196
24620-8881
24620-9030
24620-9094
24620-9190

10.500
10.250
2.375
2.875
12.000
14.000
15.000
1.500
22.000
1.187
1.187
3.750
3.000
5.500
11.000
15.000
5.905
8.267
9.842
3.543
3.937
5.708
4.921
8.661
9.448
1.885
13.500
10.750
14.960
15.748
16.535
2.500
1.875
3.740
15.000
6.500
7.000
3.937
18.500
1.875
6.299
4.724
5.512
7.874
3.346
4.331
1.969
14.566
0.750
3.937
2.750
3.740

12.500
12.250
3.543
3.751
14.000
15.500
17.000
3.250
23.500
2.835
2.441
4.999
3.880
7.000
12.250
16.772
7.086
9.448
11.023
4.527
4.921
6.889
6.102
9.842
10.629
2.700
15.000
12.750
17.322
18.110
18.897
3.875
2.625
4.724
17.000
8.000
8.000
4.937
20.500
2.835
7.480
5.941
6.693
9.055
4.724
5.511
2.559
16.141
1.375
4.724
3.881
4.725

WIDTH
0.625
0.625
0.438
0.250
0.750
1.000
0.750
0.500
0.750
0.375
0.375
0.500
0.594
0.750
0.609
1.125
0.551
0.590
0.590
0.512
0.512
0.551
0.551
0.590
0.590
0.500
0.653
0.625
0.984
0.984
0.984
0.468
0.313
0.511
1.250
0.500
0.500
0.375
0.750
0.375
0.591
0.591
0.551
0.590
0.472
0.472
0.354
0.787
0.250
0.512
0.750
0.472

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-41

Oil Seals by Model Number

MODEL NO
26R1
26R1
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

Garlock

PART NO

SHAFT

BORE

WIDTH

24620-9388
24620-9708
21086-0989
21086-2177
21086-2178
21086-2180
21086-2182
21086-2183
21086-2184
21086-2186
21086-2188
21086-2189
21086-2192
21086-2195
21086-2198
21086-2201
21086-2202
21086-2204
21086-2210
21086-2213
21086-2219
21086-2221
21086-2222
21086-2225
21086-2226
21086-2228
21086-2229
21086-2230
21086-2231
21086-2234
21086-2236
21086-2237
21086-2240
21086-2243
21086-2246
21086-2249
21086-2250
21086-2251
21086-2252
21086-2253
21086-2254
21086-2255
21086-2257
21086-2260
21086-2261
21086-2264
21086-2267
21086-2270
21086-2271
21086-2272
21086-2273
21086-2276

9.250
4.375
3.312
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.250
3.250
3.250
3.250
3.250

11.250
5.375
5.250
4.125
4.125
4.249
4.249
4.375
4.375
4.500
4.500
4.625
4.750
4.875
4.999
4.125
4.125
4.249
4.500
4.625
4.875
4.875
4.999
4.125
4.125
4.249
4.249
4.249
4.375
4.500
4.500
4.625
4.750
4.875
4.999
4.249
4.249
4.249
4.375
4.375
4.375
4.500
4.500
4.625
4.750
4.875
4.999
4.249
4.249
4.249
4.375
4.500

0.625
0.687
0.500
0.500
0.563
0.500
0.625
0.500
0.562
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.562
. 500
0.562
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.500

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

PART NO

SHAFT

BORE

WIDTH

21086-2277
21086-2278
21086-2279
21086-2282
21086-2283
21086-2284
21086-2285
21086-2287
21086-2288
21086-2297
21086-2299
21086-2300
21086-2302
21086-2303
21086-2306
21086-2309
21086-2312
21086-2315
21086-2321
21086-2323
21086-2324
21086-2325
21086-2326
21086-2327
21086-2329
21086-2330
21086-2333
21086-2336
21086-2339
21086-2342
21086-2345
21086-2348
21086-2351
21086-2353
21086-2354
21086-2356
21086-2357
21086-2360
21086-2362
21086-2363
21086-2365
21086-2366
21086-2367
21086-2368
21086-2369
21086-2370
21086-2371
21086-2372
21086-2373
21086-2374
21086-2375
21086-2378

3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500

4.500
4.500
4.625
4.750
4.750
4.750
4.875
4.875
4.999
4.375
4.375
4.500
4.500
4.625
4.750
4.875
4.999
5.125
4.375
4.375
4.500
4.500
4.500
4.625
4.625
4.750
4.875
4.999
5.125
5.250
4.500
4.625
4.750
4.750
4.875
4.875
4.999
5.125
5.125
5.250
5.250
4.500
4.500
4.500
4.625
4.625
4.625
4.750
4.750
4.750
4.875
4.999

0.562
0.625
0.500
0.500
0.562
0.625
0.500
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.562
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-42

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-2380
21086-2381
21086-2384
21086-2386
21086-2387
21086-2390
21086-2392
21086-2393
21086-2396
21086-2397
21086-2398
21086-2399
21086-2402
21086-2405
21086-2408
21086-2414
21086-2417
21086-2418
21086-2419
21086-2420
21086-2421
21086-2423
21086-2424
21086-2425
21086-2426
21086-2428
21086-2429
21086-2432
21086-2435
21086-2438
21086-2441
21086-2442
21086-2444
21086-2447
21086-2450
21086-2453
21086-2456
21086-2459
21086-2462
21086-2463
21086-2464
21086-2465
21086-2466
21086-2468
21086-2469
21086-2470
21086-2471
21086-2474
21086-2476
21086-2480
21086-2483
21086-2486

3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.812
3.812

4.999
5.125
5.250
5.250
5.375
5.500
5.500
4.625
4.750
4.750
4.750
4.875
4.999
5.125
5.250
5.500
4.625
4.625
4.625
4.750
4.750
4.875
4.875
4.875
4.999
4.999
5.125
5.250
5.375
5.500
4.750
4.750
4.875
4.999
5.125
5.250
5.375
5.500
4.750
4.750
4.750
4.875
4.875
4.999
4.999
4.999
5.125
5.250
5.250
5.500
4.875
4.999

0.625
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.562
0.500
0.562
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.562
0.500
0.562
0.625
0.500
0.500
0.625
0.500
0.500
0.500

MODEL NO

PART NO

SHAFT

BORE

WIDTH

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-2489
21086-2492
21086-2495
21086-2498
21086-2501
21086-2504
21086-2506
21086-2507
21086-2510
21086-2511
21086-2513
21086-2516
21086-2519
21086-2520
21086-2521
21086-2522
21086-2524
21086-2525
21086-2527
21086-2528
21086-2531
21086-2534
21086-2537
21086-2539
21086-2540
21086-2541
21086-2542
21086-2543
21086-2544
21086-2545
21086-2546
21086-2549
21086-2550
21086-2551
21086-2552
21086-2555
21086-2556
21086-2558
21086-2561
21086-2564
21086-2566
21086-2567
21086-2568
21086-2569
21086-2570
21086-2573
21086-2579
21086-2588
21086-2600
21086-2603
21086-2604
21086-2605

3.812
3.812
3.812
3.812
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.063
4.063
4.063
4.063
4.125
4.125
4.125
4.125

5.125
5.250
5.375
5.500
4.875
4.999
4.999
5.125
5.250
5.250
5.375
5.500
4.999
4.999
4.999
5.125
5.125
5.250
5.250
5.375
5.500
5.625
4.999
4.999
5.125
5.125
5.125
5.250
5.250
5.250
5.375
5.500
5.500
5.500
5.625
5.750
5.750
5.875
6.000
6.125
6.125
6.250
6.250
6.250
5.125
5.250
5.500
5.875
5.125
5.250
5.250
5.250

0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.562
0.500
0.500
0.500
0.562
0.625
0.500
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.625
0.500
0.563
0.625
0.500
0.563
0.625
0.500
0.500
0.563
0.625
0.500
0.500
0.563
0.500
0.500
0.500
0.625
0.500
0.563
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-43

Oil Seals by Model Number

MODEL NO
B
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

Garlock

PART NO

SHAFT

BORE

WIDTH

21086-2608
21086-2609
21086-2610
21086-2612
21086-2618
21086-2621
21086-2627
21086-2630
21086-2633
21086-2635
21086-2636
21086-2637
21086-2639
21086-2642
21086-2645
21086-2648
21086-2651
21086-2654
21086-2657
21086-2659
21086-2660
21086-2662
21086-2663
21086-2664
21086-2665
21086-2666
21086-2669
21086-2670
21086-2671
21086-2675
21086-2678
21086-2681
21086-2682
21086-2684
21086-2687
21086-2689
21086-2690
21086-2693
21086-2694
21086-2699
21086-2705
21086-2708
21086-2711
21086-2712
21086-2714
21086-2717
21086-2720
21086-2723
21086-2726
21086-2729
21086-2730

4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375

5.375
5.500
5.500
5.625
5.875
6.000
6.250
5.250
5.375
5.375
5.500
5.500
5.625
5.750
5.875
6.000
6.125
6.250
5.250
5.250
5.375
5.375
5.500
5.500
5.500
5.625
5.750
5.750
5.750
6.000
6.125
6.250
6.250
5.375
5.500
5.500
5.625
5.750
5.750
6.000
6.250
5.375
5.500
5.500
5.625
5.750
5.875
6.000
6.125
6.250
6.250

0.625
0.500
0.563
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.625
0.500
0.562
0.625
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.562
0.500
0.500
0.625
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.562

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

PART NO

SHAFT

BORE

WIDTH

21086-2732
21086-2733
21086-2735
21086-2738
21086-2739
21086-2740
21086-2744
21086-2747
21086-2750
21086-2751
21086-2753
21086-2754
21086-2755
21086-2756
21086-2757
21086-2758
21086-2759
21086-2760
21086-2761
21086-2762
21086-2765
21086-2766
21086-2767
21086-2768
21086-2771
21086-2774
21086-2776
21086-2777
21086-2780
21086-2782
21086-2783
21086-2786
21086-2789
21086-2792
21086-2795
21086-2798
21086-2799
21086-2801
21086-2802
21086-2804
21086-2807
21086-2809
21086-2810
21086-2813
21086-2818
21086-2819
21086-2820
21086-2822
21086-2825
21086-2831
21086-2834
21086-2837

4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.449
4.687
4.687
4.687
4.687
4.687
4.687
4.750

5.500
5.500
5.625
5.750
5.750
5.750
6.000
6.125
6.250
6.250
5.500
5.500
5.500
5.625
5.625
5.625
5.750
5.750
5.750
5.875
6.000
6.000
6.000
6.125
6.250
6.375
6.375
5.625
5.750
5.750
5.875
6.000
6.125
6.250
6.375
5.625
5.625
5.750
5.750
5.875
6.000
6.000
6.125
6.250
5.512
5.750
5.750
5.875
6.000
6.250
6.375
5.750

0.500
0.562
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.562
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.500
0.562
0.500
0.500
0.625
0.500
0.500
0.492
0.500
0.562
0.500
0.500
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-44

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-2838
21086-2839
21086-2840
21086-2842
21086-2843
21086-2845
21086-2846
21086-2849
21086-2851
21086-2852
21086-2855
21086-2857
21086-2858
21086-2864
21086-2869
21086-2870
21086-2872
21086-2873
21086-2875
21086-2876
21086-2878
21086-2879
21086-2881
21086-2882
21086-2885
21086-2888
21086-2891
21086-2894
21086-2896
21086-2897
21086-2900
21086-2901
21086-2903
21086-2906
21086-2908
21086-2912
21086-2915
21086-2916
21086-2917
21086-2918
21086-2921
21086-2922
21086-2923
21086-2924
21086-2926
21086-2927
21086-2929
21086-2930
21086-2933
21086-2935
21086-2936
21086-2939

4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.812
4.812
4.812
4.812
4.812
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000

5.750
5.750
5.875
5.875
6.000
6.000
6.125
6.250
6.250
6.375
5.875
5.875
6.000
6.250
6.375
5.875
5.875
6.000
6.000
6.125
6.125
6.250
6.250
6.375
6.500
6.625
6.750
6.000
6.000
6.125
6.250
6.250
6.375
6.500
6.500
6.750
6.000
6.000
6.000
6.125
6.250
6.250
6.250
6.375
6.375
6.500
6.500
6.625
6.750
6.750
6.875
7.000

0.562
0.625
0.500
0.625
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.625
0.500
0.625
0.500
0.625
0.509
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.562
0.500
0.500
0.625
0.500
0.500
0.562
0.625
0.500
0.500
0.562
0.625
0.500
0.625
0.500
0.625
0.500
0.500
0.625
0.500
0.500

MODEL NO

PART NO

SHAFT

BORE

WIDTH

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-2941
21086-2942
21086-2945
21086-2948
21086-2951
21086-2954
21086-2957
21086-2990
21086-2992
21086-2993
21086-2994
21086-2996
21086-2997
21086-2998
21086-2999
21086-3001
21086-3002
21086-3005
21086-3011
21086-3013
21086-3017
21086-3023
21086-3025
21086-3026
21086-3029
21086-3032
21086-3034
21086-3035
21086-3038
21086-3044
21086-3056
21086-3059
21086-3062
21086-3065
21086-3067
21086-3068
21086-3070
21086-3071
21086-3077
21086-3080
21086-3092
21086-3095
21086-3098
21086-3101
21086-3104
21086-3113
21086-3122
21086-3125
21086-3126
21086-3127
21086-3128
21086-3129

5.000
5.000
5.000
5.000
5.000
5.062
5.062
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.312
5.312
5.312
5.312
5.312
5.312
5.375
5.375
5.375
5.375
5.375
5.375

7.000
7.125
7.250
7.375
7.500
6.125
6.250
6.125
6.125
6.250
6.250
6.375
6.375
6.375
6.500
6.500
6.625
6.750
7.000
7.000
7.250
7.500
7.500
6.250
6.375
6.500
6.500
6.625
6.750
7.000
7.500
6.250
6.375
6.500
6.500
6.625
6.625
6.750
7.000
7.125
6.375
6.500
6.625
6.750
6.875
7.250
6.375
6.500
6.500
6.500
6.625
6.625

0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.562
0.500
0.562
0.625
0.500
0.625
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.562

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-45

Oil Seals by Model Number

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

Garlock

PART NO

SHAFT

BORE

WIDTH

21086-3130
21086-3131
21086-3134
21086-3136
21086-3139
21086-3142
21086-3151
21086-3152
21086-3155
21086-3156
21086-3158
21086-3161
21086-3164
21086-3167
21086-3176
21086-3178
21086-3179
21086-3180
21086-3181
21086-3182
21086-3183
21086-3184
21086-3185
21086-3188
21086-3190
21086-3191
21086-3194
21086-3200
21086-3203
21086-3208
21086-3218
21086-3221
21086-3226
21086-3228
21086-3230
21086-3231
21086-3234
21086-3235
21086-3236
21086-3237
21086-3240
21086-3243
21086-3245
21086-3246
21086-3249
21086-3253
21086-3258
21086-3259
21086-3268
21086-3270
21086-3271
21086-3275

5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.562
5.562
5.562
5.562
5.562
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.687
5.687
5.687
5.687
5.687
5.687
5.750

6.625
6.750
6.875
6.875
7.000
7.125
7.500
6.625
6.750
6.750
6.875
7.000
7.125
7.250
6.500
6.500
6.625
6.625
6.625
6.750
6.750
6.750
6.875
7.000
7.000
7.125
7.250
7.500
6.625
6.750
7.250
7.375
7.500
6.625
6.625
6.750
6.875
6.875
6.875
7.000
7.125
7.250
7.250
7.375
7.500
6.750
6.875
7.000
7.375
7.375
7.500
6.750

0.625
0.500
0.500
0.625
0.625
0.625
0.625
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

PART NO

SHAFT

BORE

WIDTH

21086-3276
21086-3278
21086-3281
21086-3282
21086-3283
21086-3284
21086-3287
21086-3289
21086-3290
21086-3292
21086-3293
21086-3296
21086-3297
21086-3300
21086-3305
21086-3306
21086-3309
21086-3312
21086-3316
21086-3319
21086-3322
21086-3323
21086-3324
21086-3325
21086-3328
21086-3331
21086-3335
21086-3337
21086-3338
21086-3341
21086-3343
21086-3344
21086-3347
21086-3351
21086-3355
21086-3356
21086-3357
21086-3358
21086-3359
21086-3360
21086-3361
21086-3363
21086-3364
21086-3367
21086-3369
21086-3370
21086-3371
21086-3372
21086-3374
21086-3375
21086-3377
21086-3378

5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.812
5.812
5.812
5.812
5.812
5.812
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.125
6.125
6.125

6.750
6.875
7.000
7.000
7.000
7.125
7.250
7.250
7.375
7.375
7.500
7.500
6.875
7.000
7.125
7.250
7.375
7.500
6.875
7.000
7.125
7.125
7.125
7.250
7.375
7.500
7.000
7.000
7.125
7.250
7.250
7.375
7.500
7.625
7.000
7.000
7.000
7.125
7.125
7.125
7.250
7.250
7.375
7.500
7.500
7.500
7.625
7.625
7.625
7.125
7.125
7.250

0.562
0.500
0.500
0.562
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.750
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.562
0.625
0.500
0.625
0.500
0.500
0.625
0.750
0.500
0.562
0.750
0.500
0.625
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-46

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-3380
21086-3381
21086-3383
21086-3384
21086-3387
21086-3388
21086-3391
21086-3394
21086-3395
21086-3396
21086-3397
21086-3398
21086-3402
21086-3405
21086-3406
21086-3409
21086-3413
21086-3415
21086-3417
21086-3421
21086-3423
21086-3424
21086-3425
21086-3426
21086-3428
21086-3430
21086-3432
21086-3434
21086-3435
21086-3436
21086-3438
21086-3440
21086-3442
21086-3444
21086-3445
21086-3446
21086-3447
21086-3448
21086-3450
21086-3454
21086-3456
21086-3458
21086-3460
21086-3462
21086-3464
21086-3465
21086-3466
21086-3468
21086-3470
21086-3472
21086-3474
21086-3476

6.125
6.125
6.125
6.125
6.125
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.437
6.500
6.500
6.500
6.500
6.500
6.500
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.875
6.875

7.250
7.375
7.375
7.500
7.500
7.250
7.375
7.500
7.500
7.500
7.500
7.625
7.750
7.750
7.375
7.500
7.625
7.625
7.750
7.875
7.875
7.875
7.750
7.500
7.625
7.750
7.875
8.000
8.000
7.625
7.750
7.875
8.000
8.125
8.125
8.250
8.250
8.375
8.500
8.750
7.750
7.875
8.000
8.125
8.250
8.250
8.375
8.500
8.625
8.750
7.875
8.000

0.625
0.500
0.625
0.500
0.750
0.500
0.500
0.500
0.562
0.625
0.750
0.500
0.500
0.750
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.750
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO

PART NO

SHAFT

BORE

WIDTH

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-3478
21086-3480
21086-3482
21086-3483
21086-3484
21086-3485
21086-3488
21086-3492
21086-3494
21086-3495
21086-3496
21086-3498
21086-3500
21086-3501
21086-3504
21086-3506
21086-3508
21086-3510
21086-3512
21086-3514
21086-3515
21086-3516
21086-3518
21086-3519
21086-3520
21086-3522
21086-3523
21086-3524
21086-3526
21086-3527
21086-3528
21086-3529
21086-3530
21086-3532
21086-3534
21086-3536
21086-3538
21086-3540
21086-3542
21086-3544
21086-3546
21086-3548
21086-3550
21086-3552
21086-3553
21086-3554
21086-3555
21086-3556
21086-3558
21086-3560
21086-3562
21086-3564

6.875
6.875
6.875
6.875
6.875
6.875
6.875
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.625
7.625
7.625
7.625

8.125
8.250
8.375
8.375
8.500
8.500
8.750
8.000
8.125
8.125
8.250
8.375
8.500
8.500
8.750
8.125
8.250
8.375
8.500
8.625
8.625
8.750
8.250
8.250
8.375
8.500
8.500
8.625
8.750
8.750
8.375
8.375
8.500
8.625
8.750
8.875
9.000
9.125
9.250
8.500
8.625
8.750
8.875
9.000
9.000
9.125
9.125
9.250
8.625
8.750
8.875
9.000

0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.750
0.625
0.625
0.750
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.750
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-47

Oil Seals by Model Number

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

Garlock

PART NO

SHAFT

BORE

WIDTH

21086-3565
21086-3566
21086-3567
21086-3568
21086-3570
21086-3572
21086-3574
21086-3576
21086-3578
21086-3579
21086-3580
21086-3582
21086-3584
21086-3586
21086-3588
21086-3589
21086-3590
21086-3592
21086-3593
21086-3594
21086-3596
21086-3597
21086-3598
21086-3600
21086-3601
21086-3602
21086-3603
21086-3604
21086-3605
21086-3606
21086-3607
21086-3608
21086-3609
21086-3610
21086-3611
21086-3612
21086-3613
21086-3615
21086-3616
21086-3617
21086-3618
21086-3619
21086-3621
21086-3622
21086-3623
21086-3624
21086-3628
21086-3629
21086-3630
21086-3632
21086-3633
21086-3634

7.625
7.625
7.625
7.625
7.750
7.750
7.750
7.750
7.750
7.750
7.875
7.875
7.875
7.875
7.875
7.875
7.937
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.125
8.250
8.250
8.250
8.250
8.375
8.375
8.500
8.625
8.625
8.750
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.250
9.250
9.250
9.250
9.250
9.375

9.000
9.125
9.125
9.250
8.750
8.875
9.000
9.125
9.250
9.250
8.875
9.000
9.125
9.250
9.375
9.375
9.125
9.000
9.000
9.125
9.250
9.250
9.375
9.500
9.500
10.000
10.000
9.250
9.375
9.500
10.250
9.750
10.375
10.500
10.625
10.750
10.750
10.000
10.125
10.250
10.375
10.500
10.750
10.875
11.000
11.000
10.250
10.375
10.500
10.750
11.250
11.375

0.750
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.750
0.625
0.625
0.750
0.625
0.625
0.750
1.000
1.000
0.625
0.625
0.625
1.000
0.750
1.000
1.000
0.750
1.000
1.000
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
1.000
0.750
0.750
0.750
0.750
1.000
1.000

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

PART NO

SHAFT

BORE

WIDTH

21086-3635
21086-3636
21086-3638
21086-3639
21086-3640
21086-3642
21086-3643
21086-3644
21086-3645
21086-3646
21086-3648
21086-3649
21086-3650
21086-3652
21086-3653
21086-3654
21086-3655
21086-3658
21086-3659
21086-3660
21086-3661
21086-3662
21086-3663
21086-3664
21086-3666
21086-3667
21086-3668
21086-3670
21086-3671
21086-3672
21086-3673
21086-3674
21086-3675
21086-3676
21086-3677
21086-3678
21086-3680
21086-3681
21086-3682
21086-3683
21086-3684
21086-3685
21086-3686
21086-3687
21086-3688
21086-3689
21086-3691
21086-3692
21086-3693
21086-3694
21086-3695
21086-3696

9.437
9.437
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.625
9.750
9.750
9.750
9.750
9.750
9.937
9.937
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.125
10.187
10.250
10.250
10.437
10.500
10.500
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
11.000
11.000
11.000
11.000
11.062
11.062

10.500
10.625
10.500
10.625
10.750
11.000
11.125
11.250
11.375
11.500
11.500
11.625
10.750
11.000
11.125
11.250
11.750
12.000
12.125
11.000
11.125
11.250
11.375
11.500
11.750
11.875
11.000
11.250
11.375
11.500
12.000
12.000
12.250
12.250
12.250
12.500
12.500
12.625
11.750
11.875
12.000
12.250
12.500
12.750
12.750
12.750
12.000
12.250
12.500
13.000
12.250
12.500

0.750
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
1.000
1.000
0.750
0.750
0.750
0.750
1.000
1.000
1.000
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.750
0.750
0.750
0.750
1.000
1.000
1.000
0.750
1.000
1.000
1.000
1.000
0.562
0.562
0.562
0.562
0.562
0.562
0.875
1.000
0.625
0.625
0.625
1.000
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-48

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-3697
21086-3698
21086-3703
21086-3704
21086-3705
21086-3706
21086-3707
21086-3709
21086-3710
21086-3713
21086-3714
21086-3715
21086-3717
21086-3718
21086-3719
21086-3721
21086-3722
21086-3725
21086-3726
21086-3727
21086-3728
21086-3730
21086-3731
21086-3734
21086-3736
21086-3737
21086-3738
21086-3741
21086-3742
21086-3749
21086-3770
21086-3776
21086-3796
21086-3830
21086-3838
21086-3843
21086-3844
21086-3917
21086-3918
21086-3922
21086-3924
21086-3925
21086-3928
21086-3932
21086-3933
21086-3934
21086-3935
21086-3937
21086-3939
21086-3940
21086-3941
21086-3943

11.062
11.062
11.250
11.375
11.500
11.750
11.750
12.000
12.000
12.250
12.500
12.625
12.687
12.875
13.000
13.500
13.750
14.000
14.000
14.000
14.500
15.000
15.000
15.250
16.000
16.250
16.500
18.000
18.000
20.000
24.250
25.875
30.000
34.500
35.375
36.000
36.000
6.437
6.687
8.000
8.000
8.000
8.125
8.125
8.375
8.375
8.500
8.500
8.625
8.625
8.625
8.625

12.750
13.000
13.250
13.500
13.500
13.750
14.000
14.000
14.250
14.250
14.500
14.625
14.750
14.750
15.000
15.500
15.750
16.000
16.250
16.500
16.500
17.000
17.000
17.250
18.000
18.000
18.500
19.500
20.000
22.000
26.250
28.000
32.000
36.500
37.375
38.000
38.500
7.500
7.750
9.750
10.000
10.000
9.625
10.125
9.875
9.875
9.500
10.000
10.125
10.125
10.250
10.500

WIDTH
0.750
0.750
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
0.750
0.875
1.000
0.875
1.000
1.000
1.000
0.750
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
0.500
0.625
0.750
0.687
0.750
0.750
0.750
0.687
0.750
0.625
0.750
0.687
0.750
0.750
0.750

MODEL NO

PART NO

SHAFT

BORE

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-3945
21086-3946
21086-3947
21086-3948
21086-3949
21086-3950
21086-3951
21086-3954
21086-3957
21086-3958
21086-3959
21086-3961
21086-3963
21086-3964
21086-3965
21086-3967
21086-3972
21086-3975
21086-3977
21086-3981
21086-3989
21086-3990
21086-3991
21086-3992
21086-3993
21086-3994
21086-3996
21086-3998
21086-3999
21086-4000
21086-4003
21086-4004
21086-4005
21086-4007
21086-4010
21086-4011
21086-4012
21086-4013
21086-4014
21086-4016
21086-4018
21086-4019
21086-4020
21086-4021
21086-4024
21086-4025
21086-4029
21086-4030
21086-4034
21086-4037
21086-4038
21086-4046

8.625
8.750
8.750
8.750
8.750
8.750
8.750
9.000
9.125
9.125
9.125
9.125
9.250
9.250
9.250
9.250
9.375
9.375
9.437
9.500
9.750
9.875
9.875
10.000
10.000
10.000
10.000
10.000
10.125
10.125
10.125
10.250
10.250
10.250
10.375
10.500
10.500
10.500
10.500
10.500
10.625
10.625
10.625
10.625
10.750
10.750
10.750
10.750
11.000
11.000
11.024
11.250

10.625
10.250
10.250
10.375
10.500
10.625
10.750
10.500
10.625
10.625
10.750
11.000
10.750
10.875
11.000
11.250
11.000
11.375
10.500
11.250
11.750
11.375
11.500
11.500
11.625
11.750
12.000
12.000
11.625
11.625
12.000
11.750
11.750
12.000
12.197
12.000
12.000
12.125
12.250
12.500
12.125
12.250
12.375
12.500
12.250
12.375
12.625
12.750
12.125
13.250
12.197
12.750

WIDTH
1.000
0.687
0.750
0.750
0.750
0.750
0.750
0.687
0.687
0.750
0.750
0.750
0.687
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.750
0.687
0.750
0.750
0.750
0.875
0.687
0.750
0.750
0.687
0.750
0.750
1.000
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.562
0.750
0.750
0.625
1.000
0.625
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-49

Oil Seals by Model Number

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

Garlock

PART NO

SHAFT

BORE

WIDTH

21086-4048
21086-4050
21086-4051
21086-4057
21086-4058
21086-4060
21086-4061
21086-4062
21086-4064
21086-4065
21086-4067
21086-4068
21086-4071
21086-4073
21086-4074
21086-4077
21086-4079
21086-4080
21086-4085
21086-4093
21086-4094
21086-4095
21086-4098
21086-4101
21086-4102
21086-4103
21086-4107
21086-4109
21086-4113
21086-4114
21086-4116
21086-4117
21086-4121
21086-4122
21086-4124
21086-4125
21086-4127
21086-4132
21086-4133
21086-4134
21086-4142
21086-4144
21086-4150
21086-4151
21086-4152
21086-4153
21086-4154
21086-4155
21086-4157
21086-4160
21086-4177
21086-4178

11.250
11.375
11.375
11.500
11.500
11.500
11.500
11.500
11.750
11.750
12.000
12.000
12.000
12.125
12.250
12.375
12.500
12.500
12.500
13.000
13.000
13.000
13.000
13.250
13.250
13.250
13.250
13.250
13.250
14.188
13.375
14.188
13.500
13.500
13.500
13.500
13.500
14.000
14.000
14.000
14.500
14.500
14.875
15.000
15.000
15.000
15.000
15.000
15.250
15.375
16.000
16.000

13.500
12.875
13.000
13.000
13.000
13.250
13.375
13.500
13.250
13.250
13.500
13.625
14.000
14.000
13.750
13.875
14.000
14.000
14.750
14.500
14.500
14.625
15.000
14.750
14.750
14.875
15.250
15.375
15.500
15.500
14.875
15.750
15.000
15.000
15.250
15.375
15.500
15.500
15.562
15.750
16.000
16.250
16.875
16.500
16.500
16.750
16.875
17.000
17.250
17.375
17.500
17.500

1.000
0.750
0.750
0.687
0.750
0.750
0.750
0.750
0.687
0.750
0.750
0.750
0.750
1.000
0.750
0.750
0.687
0.750
1.000
0.687
0.750
0.750
0.750
0.687
0.750
0.750
1.000
1.000
1.000
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.687
0.750
1.000
0.687
0.750
0.750
0.750
0.750
1.000
1.000
0.687
0.750

MODEL NO
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

PART NO

SHAFT

BORE

WIDTH

21086-4181
21086-4182
21086-4184
21086-4185
21086-4192
21086-4194
21086-4195
21086-4196
21086-4201
21086-4202
21086-4206
21086-4238
21086-4249
21086-4264
21086-4281
21086-4289
21086-4318
21086-4438
21086-4469
21086-4477
21086-4478
21086-4479
21086-4490
21086-4492
21086-4501
21086-4502
21086-4503
21086-4504
21086-4505
21086-4506
21086-4507
21086-4508
21086-4509
21086-4511
21086-4512
21086-4513
21086-4514
21086-4515
21086-4516
21086-4517
21086-4519
21086-4520
21086-4522
21086-4524
21086-4527
21086-4529
21086-4530
21086-4531
21086-4532
21086-4534
21086-4546
21086-4561

16.250
16.250
16.250
16.500
17.250
17.500
17.500
17.500
17.750
17.750
18.000
20.000
20.750
21.625
22.750
23.500
25.500
37.500
40.500
6.937
6.937
6.937
6.062
7.312
8.437
8.500
9.000
9.000
9.000
9.000
9.000
9.000
9.250
9.250
9.625
9.750
9.750
9.750
9.750
9.750
10.750
10.750
10.750
10.750
11.250
13.750
13.750
13.750
13.750
28.500
3.000
7.125

17.750
17.750
18.000
18.000
19.250
19.000
19.000
19.250
19.750
20.089
19.500
22.125
22.750
23.625
24.750
25.500
27.500
39.500
42.500
8.125
8.375
8.500
7.500
8.375
10.000
10.000
10.000
10.125
10.250
10.375
10.500
10.625
10.250
10.500
10.875
10.750
10.875
11.000
11.125
11.250
11.875
12.000
12.250
12.500
12.750
15.250
15.250
15.500
15.750
31.000
4.500
8.125

0.687
0.750
0.750
0.750
0.937
0.687
0.750
0.750
1.000
1.000
0.687
1.000
1.000
1.000
0.875
1.000
0.875
0.875
1.000
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.687
0.687
0.750
0.750
0.750
0.875
0.562
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-50

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53

21086-4587
21086-4609
21086-4729
21086-4817
21086-4834
21086-5115
21086-5277
21086-5357
21086-5359
21086-5535
21086-5582
21086-5677
21086-5906
21086-5987
21086-6381
21086-6386
21086-6435
21086-6501
21086-6602
21086-6628
21086-6649
21086-6697
21086-6817
21086-6829
21086-6888
21086-6903
21086-7101
21086-7253
21086-7267
21086-7268
21086-7271
21086-7276
21086-7277
21086-7376
21086-7383
21086-7388
21086-7394
21086-7396
21086-7399
21086-7426
21086-7447
21086-7473
21086-7495
21086-7664
21086-7807
21086-7836
21086-7839
21086-7840
21086-7842
21086-7848
21086-7849
21086-7868

8.500
22.125
6.125
3.937
7.874
7.500
15.000
8.661
9.448
3.437
3.625
6.625
10.000
14.562
8.000
8.750
3.000
6.500
6.125
3.312
3.000
16.500
6.500
12.250
7.312
3.312
8.500
3.500
5.511
6.693
4.528
6.299
4.724
4.724
5.512
7.874
3.346
4.331
3.346
3.150
9.437
4.375
6.889
18.000
7.087
4.724
3.543
8.661
3.937
11.024
14.173
3.375

10.625
23.875
7.625
4.937
9.055
8.464
17.250
9.842
10.629
4.921
5.000
7.875
12.000
16.000
9.625
10.000
4.331
8.125
7.625
4.724
4.922
18.500
7.750
14.250
8.437
4.331
10.500
5.000
6.693
7.874
5.512
7.480
5.906
5.906
6.693
9.055
4.724
5.512
4.921
4.331
10.625
5.563
8.465
20.250
8.267
6.299
4.724
10.236
5.118
12.598
15.748
4.724

WIDTH
0.750
0.750
0.750
0.500
0.500
0.625
0.875
0.590
0.590
0.625
0.562
0.500
0.687
0.625
0.750
0.625
0.500
0.625
0.625
0.500
0.625
0.750
0.500
0.750
0.562
0.500
0.750
0.500
0.591
0.591
0.472
0.591
0.591
0.472
0.551
0.591
0.472
0.472
0.472
0.472
0.625
0.500
0.629
1.000
0.591
0.472
0.472
0.511
0.472
0.630
0.630
0.500

MODEL NO

PART NO

SHAFT

BORE

53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1

21086-7879
21086-7887
21086-7891
21086-7892
21086-7893
21086-7896
21086-7906
21086-7942
21086-7944
21086-7945
21086-7947
21086-7948
21086-7950
21086-7952
21086-7953
21086-7957
21086-7959
21086-7960
21086-7962
21086-7963
21086-7965
21086-7967
21086-7968
21086-7970
21086-7972
21086-7974
21086-7976
21086-7978
21086-7979
21086-7980
21086-8049
21086-8121
21086-8126
21086-8313
21086-8429
21086-8619
21086-8877
21086-9558
21086-9724
21086-9780
21086-9964
22987-0238
22987-1874
22987-3677
22987-3709
22987-3890
22987-4782
22987-4853
22987-4978
22987-4995
22987-5027
22987-5059

3.000
8.267
9.448
10.236
11.811
13.386
3.312
3.000
3.062
3.062
3.125
3.125
3.187
3.250
3.250
3.312
3.375
3.437
3.437
3.500
3.500
3.562
3.625
3.625
3.687
3.750
3.812
3.875
3.937
4.000
7.480
3.187
3.562
9.625
3.543
6.299
3.500
4.812
3.000
6.500
13.500
3.312
4.331
10.250
12.000
13.000
8.375
6.875
7.938
11.375
5.437
3.000

4.922
9.842
11.023
11.811
13.386
14.961
4.725
4.724
4.331
4.724
4.331
4.724
4.331
4.331
4.724
5.118
5.118
4.724
5.118
4.724
5.118
5.118
4.724
5.118
5.118
5.118
5.118
5.118
5.118
5.118
8.661
4.724
4.724
10.875
4.724
7.677
4.921
5.905
4.250
7.500
15.500
4.500
5.500
12.250
14.000
14.500
10.375
7.875
9.125
13.500
6.875
4.125

WIDTH
0.500
0.551
0.629
0.511
0.630
0.630
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.591
0.500
0.500
0.625
0.500
0.709
0.562
0.562
0.625
0.562
0.875
0.719
0.719
1.000
1.000
1.000
1.250
0.969
0.969
1.250
0.969
0.719

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-51

Oil Seals by Model Number

MODEL NO
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1

Garlock

PART NO

SHAFT

BORE

WIDTH

22987-5162
22987-5171
22987-5201
22987-5205
22987-5211
22987-5212
22987-5234
22987-5260
22987-5319
22987-5332
22987-5492
22987-5512
22987-5646
22987-5681
22987-5831
22987-5884
22987-5892
22987-6051
22987-6137
22987-6159
22987-6433
22987-6437
22987-6447
22987-6481
22987-6520
22987-6584
22987-6590
22987-6603
22987-6661
22987-6726
22987-6741
22987-6760
22987-6846
22987-6893
22987-6902
22987-6917
22987-6920
22987-6950
22987-6990
22987-7002
22987-7115
22987-7181
22987-7232
22987-7233
22987-7241
22987-7252
22987-7289
22987-7313
22987-7332
22987-7392
22987-7402
22987-7433

3.125
5.250
3.875
9.750
6.500
6.250
7.500
8.000
3.437
3.375
4.000
3.250
3.625
8.500
13.750
6.125
4.500
6.625
5.000
3.437
7.000
7.000
10.625
10.000
8.625
3.250
3.625
5.000
8.000
9.125
5.500
8.500
14.875
5.000
4.937
4.437
6.500
3.625
4.000
5.625
3.500
3.125
4.312
7.500
7.750
5.312
3.375
3.250
3.500
12.000
3.000
6.000

4.249
6.500
4.875
11.250
8.000
7.750
9.250
9.500
4.500
4.750
5.750
4.249
5.000
10.000
15.750
7.500
5.500
8.000
6.375
4.875
8.000
8.500
12.500
11.250
10.500
4.249
4.625
6.000
9.250
11.125
6.500
10.000
16.875
6.000
6.500
5.750
7.500
4.625
4.999
7.500
4.500
4.875
6.375
9.000
9.250
6.625
4.500
4.500
4.999
14.000
4.500
7.500

0.719
0.719
0.719
1.000
0.844
0.719
0.937
0.969
0.719
0.750
0.781
0.937
0.719
1.250
0.969
0.969
0.719
0.844
0.719
0.719
0.844
0.969
0.969
1.000
1.000
0.719
0.719
0.719
0.844
1.250
0.719
1.000
1.219
0.969
0.719
0.719
0.844
0.719
0.718
0.719
0.719
0.969
0.781
0.844
0.844
0.719
0.719
0.718
0.719
1.250
0.719
0.906

MODEL NO
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53F1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1

PART NO

SHAFT

BORE

WIDTH

22987-7436
22987-7448
22987-7572
22987-7585
22987-7670
22987-7880
22987-7909
22987-8149
22987-8182
22987-8216
22987-8278
22987-8306
22987-8471
22987-8531
22987-8683
22987-8703
22987-8717
22987-8729
22987-9209
22987-9304
22987-9347
22987-9429
22987-9584
22987-9708
22537-3694
22537-4711
22537-4825
22537-4836
22537-4837
22537-4888
22537-4925
22537-4991
22537-5008
22537-5021
22537-5049
22537-5183
22537-5260
22537-5300
22537-5420
22537-5949
22537-5950
22537-6089
22537-6140
22537-6146
22537-6154
22537-6354
22537-6432
22537-6433
22537-6434
22537-6461
22537-6521
22537-6534

6.750
4.000
6.750
10.625
3.250
4.250
9.500
6.500
8.750
6.750
4.500
5.500
5.625
3.687
4.125
15.000
9.500
8.250
3.375
6.000
4.625
5.125
7.500
4.375
11.000
5.625
5.500
4.750
4.250
14.000
9.500
6.250
3.500
9.250
3.937
3.437
8.000
3.500
5.750
9.000
12.000
7.125
8.500
6.125
13.500
15.000
5.125
7.000
4.000
3.187
9.000
3.500

8.000
5.500
8.250
12.500
4.249
5.250
11.500
7.500
10.000
8.000
5.625
6.750
6.875
5.250
5.125
17.000
10.500
9.500
4.375
7.500
6.000
7.000
9.000
5.375
13.000
6.750
6.500
6.000
5.375
16.000
11.500
7.500
4.750
10.750
4.999
4.500
9.500
4.500
7.250
11.000
13.500
8.625
9.500
7.500
15.500
17.000
6.125
8.000
5.250
4.249
10.500
4.500

0.719
0.719
0.781
1.000
0.750
0.719
1.250
0.781
1.000
0.844
0.719
0.719
0.719
0.781
0.719
1.187
1.000
0.844
0.687
0.719
0.719
0.719
0.718
0.718
1.000
0.906
0.906
0.906
0.906
1.375
1.312
1.344
0.906
1.375
0.906
0.906
0.969
0.812
0.906
1.375
1.312
1.094
1.312
0.906
1.375
1.375
0.843
0.844
0.906
0.906
1.375
0.906

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-52

Rev. 1/01

Garlock
MODEL NO
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R1
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2

Oil Seals by Model Number

PART NO

SHAFT

BORE

22537-6545
22537-6564
22537-6663
22537-6685
22537-6708
22537-6711
22537-6760
22537-6770
22537-6945
22537-7255
22537-7269
22537-7330
22537-7433
22537-7439
22537-7560
22537-7611
22537-7774
22537-7796
22537-7905
22537-8384
22537-8396
22537-8454
22537-8480
22537-8570
22537-8662
22537-8687
22537-8708
22537-8751
22537-8756
22537-8818
22537-8829
22537-8868
22537-8870
22537-9039
22537-9087
22537-9299
22537-9401
22537-9485
22537-9618
22537-9664
22537-9713
22537-5260
22627-3694
22627-4491
22627-4650
22627-4668
22627-4751
22627-4752
22627-4784
22627-4825
22627-4828
22627-4836

3.562
7.500
9.250
4.500
3.250
5.000
8.500
8.500
6.750
3.000
3.500
6.250
6.000
4.437
4.500
3.500
10.500
6.875
3.562
7.500
3.625
4.331
5.875
3.937
10.000
8.750
5.937
8.000
10.000
5.750
9.875
10.000
6.000
13.500
7.250
8.500
3.625
8.000
8.375
6.750
9.750
8.000
11.000
20.750
16.250
5.000
12.375
4.125
6.000
5.500
5.000
4.750

4.625
9.000
11.000
5.500
4.249
6.000
10.000
10.500
8.250
4.125
4.750
7.250
7.500
5.500
6.000
4.875
12.500
8.375
5.250
8.500
4.750
5.500
7.250
5.375
12.000
10.750
7.500
9.000
12.000
7.250
11.875
11.000
7.000
15.500
8.250
9.500
4.875
9.500
9.750
8.250
11.000
9.500
13.000
22.750
17.750
6.500
13.875
5.500
7.500
6.500
6.250
6.000

WIDTH
0.906
1.343
1.375
0.969
0.906
0.906
1.000
1.312
1.032
0.906
0.843
0.906
0.906
0.906
0.906
0.969
1.375
1.156
0.906
1.094
0.906
0.875
0.906
0.906
1.812
1.375
0.906
1.156
1.250
1.344
1.312
1.375
1.156
1.437
1.156
1.094
0.844
1.094
1.156
1.156
1.375
0.969
1.000
1.750
1.281
0.906
1.437
0.969
1.344
0.906
0.906
0.906

MODEL NO
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2

PART NO

SHAFT

BORE

22627-4884
22627-4888
22627-4894
22627-4904
22627-4942
22627-4943
22627-4982
22627-5021
22627-5090
22627-5183
22627-5285
22627-5324
22627-5500
22627-5531
22627-5621
22627-5645
22627-5651
22627-5710
22627-5883
22627-5918
22627-5927
22627-5932
22627-5949
22627-6063
22627-6082
22627-6117
22627-6146
22627-6154
22627-6166
22627-6354
22627-6432
22627-6437
22627-6461
22627-6521
22627-6528
22627-6534
22627-6545
22627-6563
22627-6596
22627-6607
22627-6640
22627-6663
22627-6685
22627-6708
22627-6711
22627-6739
22627-6746
22627-6799
22627-6806
22627-6814
22627-6842
22627-6871

12.000
14.000
15.000
4.250
7.500
9.000
5.125
9.250
5.687
3.437
4.750
5.625
7.250
6.500
5.250
3.875
8.000
5.750
8.000
8.375
11.000
7.875
9.000
11.375
4.125
15.000
6.125
13.500
5.750
15.000
5.125
7.000
3.187
9.000
3.250
3.500
3.562
4.250
7.500
13.000
5.000
9.250
4.500
3.250
5.000
3.125
6.000
4.000
3.750
4.875
10.000
4.187

13.875
16.000
17.000
5.250
9.250
10.750
6.500
10.750
7.500
4.500
5.750
6.875
8.250
7.500
6.500
4.875
9.000
7.000
9.250
9.875
12.500
9.375
11.000
13.000
5.250
17.000
7.500
15.500
7.000
17.000
6.125
8.500
4.249
10.500
4.500
4.500
4.625
5.750
9.250
15.000
6.000
11.000
5.500
4.249
6.000
4.125
7.000
4.999
4.999
6.500
12.000
6.000

WIDTH
1.312
1.375
1.312
0.906
1.344
1.375
0.906
1.375
0.906
0.906
0.937
0.969
1.344
0.906
1.344
0.906
1.344
1.031
1.000
1.156
1.375
0.969
1.375
1.375
0.906
1.250
0.906
1.375
0.906
1.375
0.843
0.969
0.906
1.375
0.906
0.906
0.906
0.906
1.218
1.375
0.969
1.375
0.969
0.906
0.906
0.906
0.969
0.906
0.906
0.906
1.375
0.906

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-53

Oil Seals by Model Number

MODEL NO
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2

Garlock

PART NO

SHAFT

BORE

WIDTH

22627-6901
22627-6942
22627-6945
22627-6954
22627-6968
22627-6969
22627-7111
22627-7202
22627-7245
22627-7247
22627-7255
22627-7258
22627-7283
22627-7315
22627-7324
22627-7326
22627-7348
22627-7358
22627-7360
22627-7361
22627-7404
22627-7409
22627-7419
22627-7433
22627-7440
22627-7559
22627-7562
22627-7610
22627-7629
22627-7651
22627-7707
22627-7803
22627-7877
22627-8202
22627-8396
22627-8441
22627-8546
22627-8630
22627-8635
22627-8667
22627-8685
22627-8686
22627-8687
22627-8700
22627-8716
22627-8771
22627-8775
22627-8828
22627-8909
22627-9018
22627-9036
22627-9165

3.625
9.500
6.750
7.750
3.125
8.500
5.562
6.000
4.625
6.250
3.000
4.500
12.000
4.937
3.500
12.000
4.687
7.750
7.000
5.125
18.000
5.500
3.250
6.000
3.750
4.000
9.250
5.250
6.250
4.062
7.250
4.375
4.750
4.375
3.625
3.250
7.250
4.875
4.312
7.125
6.875
7.750
8.750
3.250
12.500
4.000
6.625
9.000
9.500
4.125
11.500
8.000

4.625
10.750
8.250
8.750
4.999
9.500
6.875
7.250
5.750
7.750
4.125
5.750
14.000
6.500
4.999
13.625
6.000
9.250
8.500
6.250
19.500
6.750
4.250
7.500
4.750
5.125
11.250
6.750
7.750
6.000
8.375
5.500
6.250
5.375
4.750
4.999
8.500
6.000
5.500
8.500
8.125
8.750
10.750
4.500
14.000
6.000
8.125
10.500
11.250
5.125
13.500
9.000

0.906
1.375
1.031
1.156
0.906
0.969
0.906
1.343
0.906
0.906
0.906
0.969
1.375
0.906
0.906
1.437
0.906
0.875
0.875
0.906
1.250
0.906
0.969
0.906
0.906
0.906
1.375
0.906
1.344
0.906
1.125
0.969
0.906
0.906
0.906
0.906
1.094
0.906
0.969
1.094
1.406
1.094
1.375
0.843
1.375
0.906
0.969
1.437
1.375
0.906
1.250
0.969

MODEL NO
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53R2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2

PART NO

SHAFT

BORE

WIDTH

22627-9320
22627-9414
22627-9419
22627-9422
22627-9423
22627-9474
22627-9532
22627-9854
22627-9970
22627-9972
22627-7258
22897-4545
22897-4650
22897-4653
22897-4668
22897-4681
22897-4708
22897-4752
22897-4800
22897-4836
22897-4876
22897-4894
22897-5043
22897-5179
22897-5286
22897-5304
22897-5531
22897-5584
22897-5758
22897-5883
22897-5923
22897-5932
22897-5941
22897-6463
22897-6505
22897-6511
22897-6526
22897-6527
22897-6534
22897-6640
22897-6691
22897-6739
22897-6746
22897-6750
22897-6793
22897-6893
22897-6942
22897-6969
22897-7110
22897-7128
22897-7174
22897-7181

4.125
8.500
12.500
5.750
18.000
23.000
8.437
5.750
8.000
5.250
4.500
8.250
16.250
10.625
5.000
8.250
4.875
4.125
10.000
4.750
7.750
15.000
4.687
8.250
6.500
13.750
6.500
11.500
3.000
8.000
5.500
7.875
3.187
4.875
3.625
3.000
6.875
12.500
3.500
5.000
7.125
3.125
6.000
5.250
18.000
5.000
9.500
8.500
4.500
5.750
6.500
3.125

5.375
10.500
14.500
7.250
20.000
25.000
10.000
7.000
10.000
7.125
5.750
9.500
17.750
12.375
6.500
10.250
6.625
5.500
12.000
6.000
9.250
17.000
5.750
10.250
7.500
15.750
7.500
13.000
4.500
9.250
7.000
9.375
4.249
6.625
5.500
4.500
8.250
14.500
4.500
6.000
8.250
4.125
7.000
6.500
20.000
6.250
10.750
9.500
5.500
7.000
7.500
4.875

0.906
1.250
1.250
1.032
1.750
1.687
1.000
0.844
1.375
0.906
0.969
1.125
1.281
1.437
0.906
1.875
0.969
0.969
1.312
0.906
0.969
1.312
0.906
1.218
1.218
1.437
0.906
1.250
0.937
1.000
0.969
0.969
0.969
0.906
0.969
0.906
1.406
1.312
0.906
0.969
0.969
0.906
0.969
0.969
1.812
0.969
1.375
0.969
0.906
0.969
1.031
0.969

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-54

Rev. 1/01

Garlock
MODEL NO
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53T2
53TB
53TB
53TF
53TF
53TF
53TF
54
54
54
54
54
54
54
54
54
54
54
54
54
54

Oil Seals by Model Number

PART NO

SHAFT

BORE

22897-7347
22897-7357
22897-7365
22897-7370
22897-7419
22897-7433
22897-7551
22897-7562
22897-7609
22897-7611
22897-7689
22897-7774
22897-7777
22897-7786
22897-7803
22897-7823
22897-7864
22897-7920
22897-8462
22897-8597
22897-8608
22897-8630
22897-8680
22897-8685
22897-8697
22897-8811
22897-8829
22897-9045
22897-9103
22897-9168
22897-9472
22897-9611
22807-7230
22807-8731
22994-5008
22994-5884
22994-6893
22994-7784
21140-6003
21140-6005
21140-6008
21140-6010
21140-6014
21140-6018
21140-6020
21140-6021
21140-6023
21140-6024
21140-7351
21140-9733
21140-9750
21140-9986

5.125
3.375
5.125
8.000
3.250
6.000
3.000
9.250
6.375
3.500
4.625
10.500
6.875
8.125
4.375
9.125
6.250
7.250
9.000
20.000
3.187
4.875
10.500
6.875
4.500
4.187
9.875
4.687
9.250
6.750
7.875
10.750
3.500
4.000
3.500
6.125
5.000
3.250
2.375
2.750
3.562
4.000
4.375
5.000
5.250
5.625
6.625
7.000
4.250
3.375
8.000
4.750

6.125
4.375
6.125
9.750
4.250
7.500
4.500
11.250
7.500
4.875
6.000
12.500
8.000
10.125
5.500
10.625
7.250
8.250
11.000
22.000
4.999
6.000
12.500
8.125
6.250
5.250
11.875
6.250
10.625
8.500
9.375
11.875
4.750
5.125
4.750
7.500
6.250
4.375
5.125
6.000
7.250
8.000
9.125
9.750
10.750
11.375
12.500
13.500
8.250
6.500
14.750
9.250

WIDTH
0.906
0.906
0.969
1.406
0.969
0.906
0.969
1.375
0.969
0.969
0.969
1.375
1.219
1.281
0.969
1.250
0.969
1.219
1.250
1.812
0.969
0.906
1.812
1.406
0.969
0.969
1.312
0.969
1.437
1.219
1.141
1.375
0.969
0.969
0.906
0.969
0.969
0.906
0.625
0.625
0.562
0.625
0.625
0.625
0.687
1.000
0.625
0.750
0.625
0.625
0.625
0.625

MODEL NO

PART NO

SHAFT

58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

21003-0584
21003-1490
21003-1797
21003-1921
21003-2033
21003-2225
21003-2255
21003-2262
21003-2295
21003-2384
21003-2417
21003-2462
21003-2488
21003-2490
21003-2692
21003-2710
21003-2887
21003-2902
21003-2989
21003-3059
21003-3176
21003-3327
21003-3474
21003-3499
21003-3515
21003-3967
21003-4263
21003-4264
21003-7388
21003-9724
24700-0001
24700-0002
24700-0003
24700-0004
24700-0005
24700-0006
24700-0007
24700-0008
24700-0009
24700-0010
24700-0011
24700-0012
24700-0013
24700-0014
24700-0015
24700-0016
24700-0017
24700-0018
24700-0019
24700-0020
24700-0021
24700-0022

6.496
2.362
1.772
2.953
5.866
3.125
3.187
4.409
1.375
3.500
3.625
3.750
2.362
8.540
7.250
4.999
4.921
1.969
5.118
5.250
5.500
5.906
6.875
7.000
7.125
9.250
3.937
4.331
7.874
3.000
7.283
8.000
8.063
8.125
8.250
8.250
8.250
8.375
8.375
8.375
8.375
8.500
8.500
8.625
8.625
8.625
8.625
8.625
8.661
8.661
8.661
8.750

BORE
7.480
2.953
2.441
3.937
6.875
4.125
4.500
5.709
2.562
5.250
4.625
4.750
4.331
9.750
8.750
5.905
5.906
2.835
6.299
6.250
6.500
7.087
7.875
8.375
8.625
11.250
4.724
5.512
9.055
4.250
8.850
10.000
10.062
10.125
10.250
10.500
11.500
9.750
9.875
10.375
10.500
10.000
10.500
10.000
10.125
10.250
10.625
10.750
10.236
10.228
10.819
10.250

WIDTH
0.512
0.315
0.394
0.512
0.562
0.500
0.500
0.551
0.500
0.500
0.500
0.500
0.512
0.625
0.875
0.512
0.472
0.394
0.551
0.500
0.500
0.591
0.625
0.750
0.750
0.750
0.433
0.551
0.591
0.625
0.625
0.625
1.000
0.625
0.625
0.875
0.750
0.625
0.625
0.750
0.875
0.625
0.625
0.750
0.625
0.625
0.625
0.875
0.625
0.625
0.950
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-55

Oil Seals by Model Number

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

Garlock

PART NO

SHAFT

BORE

WIDTH

24700-0023
24700-0024
24700-0025
24700-0026
24700-0027
24700-0028
24700-0029
24700-0030
24700-0031
24700-0032
24700-0033
24700-0034
24700-0035
24700-0036
24700-0037
24700-0038
24700-0039
24700-0040
24700-0041
24700-0042
24700-0043
24700-0044
24700-0045
24700-0046
24700-0047
24700-0048
24700-0049
24700-0050
24700-0051
24700-0052
24700-0053
24700-0054
24700-0055
24700-0056
24700-0057
24700-0058
24700-0059
24700-0060
24700-0061
24700-0062
24700-0063
24700-0064
24700-0065
24700-0066
24700-0067
24700-0068
24700-0069
24700-0070
24700-0071
24700-0072
24700-0073
24700-0074

8.750
8.750
8.858
8.875
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.055
9.055
9.125
9.125
9.125
9.187
9.250
9.250
9.250
9.250
9.250
9.250
9.375
9.375
9.375
9.375
9.438
9.438
9.449
9.449
9.500
9.500
9.500
9.620
9.625
9.719
9.750
9.750
9.750
9.750
9.750
9.844
9.875
9.875
9.938
9.938
10.000
10.000
10.000
10.000

10.500
10.625
11.016
11.000
10.125
10.187
10.375
10.500
10.625
11.000
11.054
11.250
10.621
11.024
10.625
10.750
11.125
10.375
10.500
10.750
11.000
11.250
11.375
11.500
10.375
10.625
10.875
11.375
10.625
11.500
10.630
11.811
11.000
11.125
11.500
10.875
10.875
11.625
11.125
11.250
11.500
11.750
12.000
11.409
11.375
12.000
12.000
12.125
11.375
11.625
11.750
12.000

0.750
0.750
0.906
0.875
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.875
0.629
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.750
0.875
0.875
1.000
0.625
0.750
0.625
0.750
0.875
0.630
0.984
0.625
0.625
0.625
0.625
0.750
0.700
0.625
0.625
0.750
0.625
0.875
0.625
0.750
0.875
0.750
1.000
0.750
0.750
0.625
0.625

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

PART NO

SHAFT

BORE

WIDTH

24700-0075
24700-0076
24700-0077
24700-0078
24700-0079
24700-0080
24700-0081
24700-0082
24700-0083
24700-0084
24700-0085
24700-0086
24700-0087
24700-0088
24700-0089
24700-0090
24700-0091
24700-0092
24700-0093
24700-0094
24700-0095
24700-0096
24700-0097
24700-0098
24700-0099
24700-0100
24700-0101
24700-0102
24700-0103
24700-0104
24700-0105
24700-0106
24700-0107
24700-0108
24700-0109
24700-0110
24700-0111
24700-0112
24700-0113
24700-0114
24700-0115
24700-0116
24700-0117
24700-0118
24700-0119
24700-0120
24700-0121
24700-0122
24700-0123
24700-0124
24700-0125
24700-0126

10.000
10.125
10.125
10.188
10.236
10.250
10.250
10.250
10.250
10.375
10.375
10.375
10.375
10.438
10.438
10.500
10.500
10.500
10.500
10.625
10.625
10.625
10.625
10.625
10.630
10.750
10.750
10.750
10.750
10.875
10.875
11.000
11.000
11.024
11.024
11.063
11.063
11.063
11.125
11.125
11.125
11.250
11.250
11.250
11.375
11.375
11.375
11.375
11.417
11.438
11.500
11.500

12.250
11.625
11.750
12.250
12.590
11.500
11.750
12.000
12.500
11.625
11.875
12.197
12.500
12.438
12.500
12.000
12.125
12.250
12.625
11.812
12.125
12.375
12.500
13.000
13.189
12.000
12.250
12.500
13.000
12.375
12.500
12.250
13.000
12.197
13.386
12.250
12.500
13.000
12.750
13.000
13.250
12.500
13.250
13.500
12.875
13.000
13.375
13.500
13.142
13.000
12.875
13.000

0.875
0.688
0.688
1.000
0.984
0.625
0.625
0.625
0.750
0.625
0.750
1.000
0.875
0.875
1.000
0.625
0.625
0.750
1.000
0.625
0.750
0.750
0.750
0.750
0.708
0.625
0.625
0.625
0.875
0.750
1.000
0.625
0.625
0.629
0.984
0.750
0.750
0.750
1.000
1.000
0.875
0.625
0.625
0.875
0.750
0.625
0.813
1.000
0.750
0.688
0.688
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-56

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-0127
24700-0128
24700-0129
24700-0130
24700-0131
24700-0132
24700-0133
24700-0134
24700-0135
24700-0136
24700-0137
24700-0138
24700-0139
24700-0140
24700-0141
24700-0142
24700-0143
24700-0144
24700-0145
24700-0146
24700-0147
24700-0148
24700-0149
24700-0150
24700-0151
24700-0152
24700-0153
24700-0154
24700-0155
24700-0156
24700-0157
24700-0158
24700-0159
24700-0160
24700-0161
24700-0162
24700-0163
24700-0164
24700-0165
24700-0166
24700-0167
24700-0168
24700-0169
24700-0170
24700-0171
24700-0172
24700-0173
24700-0174
24700-0175
24700-0176
24700-0177
24700-0178

11.500
11.500
11.500
11.625
11.750
11.750
11.750
11.811
11.813
11.813
11.813
11.938
12.000
12.000
12.000
12.000
12.000
12.050
12.063
12.125
12.125
12.188
12.188
12.250
12.250
12.250
12.375
12.375
12.375
12.375
12.500
12.500
12.500
12.565
12.590
12.598
12.598
12.625
12.625
12.688
12.688
12.750
12.750
12.750
12.750
12.750
12.875
12.992
13.000
13.000
13.220
13.250

13.250
13.375
13.500
13.191
13.250
13.750
14.000
13.386
13.780
13.812
14.000
13.938
13.250
13.500
13.625
14.188
14.750
13.313
13.313
13.875
14.000
13.438
13.688
13.813
14.000
14.250
13.875
14.000
14.375
14.500
13.750
14.750
15.000
14.063
14.125
13.780
13.976
14.500
14.625
14.250
14.750
14.250
14.750
15.000
15.250
15.500
15.500
14.566
14.812
14.875
14.407
14.750

WIDTH
0.750
0.750
0.625
0.750
0.625
0.625
1.000
0.709
1.000
0.625
0.750
0.625
0.625
0.625
0.625
1.000
0.875
0.750
0.750
0.750
0.875
0.625
0.625
0.719
0.625
0.625
0.688
0.750
1.000
0.875
0.625
1.000
0.813
0.750
1.000
0.625
0.630
0.875
0.875
0.750
1.000
0.625
0.750
0.875
0.875
0.875
0.875
0.708
0.625
0.875
0.625
0.625

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-0179
24700-0180
24700-0181
24700-0182
24700-0183
24700-0184
24700-0185
24700-0186
24700-0187
24700-0188
24700-0189
24700-0190
24700-0191
24700-0192
24700-0193
24700-0194
24700-0195
24700-0196
24700-0197
24700-0198
24700-0199
24700-0200
24700-0201
24700-0202
24700-0203
24700-0204
24700-0205
24700-0206
24700-0207
24700-0208
24700-0210
24700-0211
24700-0212
24700-0213
24700-0214
24700-0215
24700-0216
24700-0217
24700-0218
24700-0219
24700-0220
24700-0221
24700-0222
24700-0223
24700-0224
24700-0225
24700-0226
24700-0227
24700-0228
24700-0229
24700-0230
24700-0231

13.250
13.250
13.250
13.250
13.250
13.250
13.375
13.375
13.375
13.386
13.386
13.500
13.500
13.500
13.500
13.500
13.500
13.625
13.625
13.750
13.750
13.750
13.750
13.750
13.750
13.779
13.813
13.875
13.938
13.938
13.938
13.938
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.125
14.172
14.188
14.188
14.188
14.188
14.188
14.250
14.250
14.250
14.250
14.370

14.875
15.000
15.125
15.250
15.375
16.000
14.875
15.000
15.375
14.645
14.960
15.000
15.250
15.312
15.750
15.752
17.300
15.500
16.125
15.000
15.250
15.500
15.508
15.750
16.000
15.354
16.000
16.000
15.438
15.500
15.744
16.000
15.500
15.562
15.625
15.750
15.752
16.000
16.500
16.625
16.745
16.734
15.500
15.750
16.000
16.188
16.750
15.750
16.000
16.250
16.500
15.938

WIDTH
0.750
0.750
0.875
0.750
1.000
0.875
0.750
0.750
0.875
0.630
0.688
0.625
0.750
0.625
0.875
1.000
1.000
1.000
1.250
0.750
0.625
0.750
0.750
0.625
0.875
0.709
1.000
1.000
0.625
0.750
1.000
0.875
0.625
0.750
0.625
0.688
0.813
0.750
0.813
0.625
0.875
0.844
0.688
0.750
0.875
0.813
0.875
0.750
0.875
0.813
0.875
0.709

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-57

Oil Seals by Model Number

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

Garlock

PART NO

SHAFT

BORE

WIDTH

24700-0232
24700-0233
24700-0234
24700-0235
24700-0236
24700-0237
24700-0238
24700-0239
24700-0240
24700-0241
24700-0242
24700-0243
24700-0244
24700-0245
24700-0246
24700-0247
24700-0248
24700-0249
24700-0250
24700-0251
24700-0252
24700-0253
24700-0254
24700-0255
24700-0256
24700-0257
24700-0258
24700-0259
24700-0260
24700-0261
24700-0262
24700-0263
24700-0264
24700-0265
24700-0266
24700-0267
24700-0268
24700-0269
24700-0270
24700-0271
24700-0273
24700-0274
24700-0275
24700-0276
24700-0277
24700-0278
24700-0279
24700-0281
24700-0282
24700-0283
24700-0284
24700-0285

14.375
14.375
14.500
14.625
14.625
14.625
14.688
14.750
14.750
14.875
14.875
14.875
14.875
14.875
14.906
14.961
15.000
15.000
15.000
15.000
15.125
15.250
15.250
15.313
15.359
15.375
15.375
15.472
15.500
15.500
15.500
15.500
15.604
15.625
15.625
15.740
15.748
15.750
15.750
15.750
15.750
15.750
15.875
15.938
16.000
16.000
16.000
16.000
16.250
16.250
16.250
16.250

15.875
16.000
16.500
16.125
16.250
16.750
16.188
16.250
16.500
16.500
16.750
16.875
17.000
17.500
17.000
16.535
16.500
16.750
17.500
17.750
16.750
16.750
17.250
17.313
17.709
17.250
17.375
17.502
16.875
17.500
17.750
18.000
16.974
17.125
17.625
17.250
17.716
17.000
17.250
17.500
17.750
18.000
17.875
17.313
17.500
17.625
18.000
18.500
17.750
18.000
18.250
18.500

0.750
0.688
0.750
0.750
0.750
1.000
0.625
0.625
0.688
0.750
0.875
1.000
0.875
0.875
0.875
0.787
0.688
0.750
0.875
0.875
0.750
0.688
0.750
0.688
0.906
0.750
0.688
0.708
0.625
0.750
1.000
1.000
0.625
0.750
0.875
0.688
0.689
0.625
0.688
0.688
0.875
0.875
0.750
0.625
0.688
0.750
0.750
0.813
0.625
0.625
1.000
1.250

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

PART NO

SHAFT

BORE

WIDTH

24700-0286
24700-0287
24700-0289
24700-0290
24700-0291
24700-0293
24700-0294
24700-0295
24700-0296
24700-0297
24700-0298
24700-0299
24700-0300
24700-0301
24700-0302
24700-0304
24700-0305
24700-0306
24700-0307
24700-0309
24700-0310
24700-0311
24700-0312
24700-0313
24700-0314
24700-0315
24700-0316
24700-0317
24700-0318
24700-0319
24700-0320
24700-0321
24700-0322
24700-0323
24700-0324
24700-0325
24700-0326
24700-0327
24700-0328
24700-0329
24700-0330
24700-0331
24700-0332
24700-0333
24700-0334
24700-0335
24700-0336
24700-0337
24700-0338
24700-0339
24700-0340
24700-0341

16.375
16.375
16.500
16.500
16.500
16.500
16.535
16.535
16.750
16.750
16.750
16.929
17.000
17.000
17.000
17.000
17.250
17.250
17.500
17.500
17.500
17.500
17.625
17.625
17.625
17.625
17.750
17.750
17.818
17.818
17.875
17.875
18.000
18.000
18.000
18.000
18.000
18.000
18.120
18.125
18.250
18.250
18.250
18.375
18.375
18.375
18.375
18.375
18.500
18.500
18.750
18.750

17.875
18.375
18.000
18.250
18.500
19.000
18.102
18.110
18.250
18.500
19.000
18.903
18.500
19.000
19.250
19.500
18.750
19.250
19.000
19.500
19.750
20.522
19.125
19.250
19.375
19.625
19.750
20.089
19.750
20.500
19.500
19.875
19.500
19.750
19.875
20.000
20.500
21.000
20.500
20.500
19.750
19.867
19.875
19.875
19.938
20.000
20.375
20.500
20.000
20.250
20.250
20.500

0.750
1.000
0.750
0.750
0.750
0.875
0.787
0.787
0.687
0.875
0.875
0.969
0.625
0.750
1.000
0.875
0.750
0.938
0.625
0.688
0.750
1.500
0.750
0.688
0.750
0.688
0.750
1.000
0.750
1.000
0.625
0.750
0.688
0.750
0.750
0.750
1.250
0.688
1.000
1.000
0.750
1.000
1.000
0.688
0.625
0.750
0.875
0.875
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-58

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-0343
24700-0344
24700-0345
24700-0346
24700-0347
24700-0348
24700-0349
24700-0350
24700-0352
24700-0354
24700-0355
24700-0356
24700-0357
24700-0358
24700-0359
24700-0360
24700-0362
24700-0363
24700-0364
24700-0365
24700-0366
24700-0367
24700-0368
24700-0369
24700-0370
24700-0371
24700-0372
24700-0373
24700-0374
24700-0375
24700-0377
24700-0380
24700-0381
24700-0382
24700-0384
24700-0385
24700-0386
24700-0387
24700-0390
24700-0391
24700-0392
24700-0394
24700-0395
24700-0397
24700-0398
24700-0399
24700-0400
24700-0401
24700-0402
24700-0403
24700-0404
24700-0405

18.750
18.897
19.000
19.000
19.000
19.250
19.250
19.250
19.375
19.500
19.500
19.500
19.750
19.750
19.875
19.938
20.000
20.000
20.000
20.000
20.250
20.250
20.250
20.250
20.438
20.500
20.500
20.750
20.750
20.866
20.875
21.000
21.000
21.000
21.000
21.000
21.250
21.250
21.500
21.500
21.500
21.625
21.625
21.750
21.750
21.750
21.750
22.000
22.000
22.000
22.250
22.375

20.750
20.464
20.500
21.000
21.500
20.750
21.000
21.250
21.000
21.000
21.500
21.688
21.750
22.250
22.000
21.500
21.500
21.750
22.125
22.500
21.750
22.250
22.375
22.500
22.500
22.000
22.500
22.750
23.000
22.836
22.875
22.500
22.750
23.000
23.250
23.500
23.000
23.250
23.250
23.500
24.000
23.375
23.625
23.750
24.000
24.250
24.750
24.000
24.250
24.500
24.250
24.250

WIDTH
0.750
0.787
0.750
0.875
0.750
0.750
0.750
0.750
0.813
0.750
0.750
0.750
0.875
0.875
0.875
0.750
0.625
0.750
1.000
0.875
0.750
0.875
1.000
0.875
0.750
0.750
0.625
0.750
0.875
0.787
0.750
0.750
0.750
0.625
0.875
0.875
0.750
0.625
0.750
0.750
0.875
0.750
0.875
0.750
0.875
0.875
1.000
0.750
1.000
0.875
0.875
0.750

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-0406
24700-0407
24700-0408
24700-0409
24700-0411
24700-0412
24700-0413
24700-0414
24700-0415
24700-0416
24700-0417
24700-0418
24700-0419
24700-0420
24700-0421
24700-0422
24700-0423
24700-0424
24700-0425
24700-0426
24700-0427
24700-0428
24700-0429
24700-0430
24700-0431
24700-0432
24700-0433
24700-0434
24700-0435
24700-0436
24700-0437
24700-0438
24700-0439
24700-0440
24700-0441
24700-0442
24700-0443
24700-0444
24700-0445
24700-0446
24700-0447
24700-0448
24700-0450
24700-0451
24700-0452
24700-0453
24700-0454
24700-0455
24700-0456
24700-0457
24700-0458
24700-0459

22.375
22.375
22.438
22.438
22.500
22.500
22.500
22.500
22.750
22.750
22.750
23.000
23.000
23.000
23.000
23.000
23.250
23.250
23.375
23.500
23.500
23.562
23.563
23.625
23.625
23.750
23.875
24.000
24.000
24.000
24.000
24.250
24.375
24.438
24.438
24.500
25.000
25.000
25.000
25.000
25.125
25.188
25.250
25.250
25.375
25.500
25.500
25.625
25.750
25.750
25.875
25.988

24.368
24.375
24.250
24.438
24.250
24.495
24.500
24.750
24.500
24.750
25.000
24.500
24.750
25.000
25.375
25.500
25.000
25.250
25.375
25.250
25.500
25.250
25.375
25.750
26.000
26.750
26.000
25.500
26.000
26.250
26.500
26.250
26.375
26.000
26.438
26.500
26.500
27.000
27.375
27.500
26.750
26.875
27.250
28.000
28.500
27.000
27.500
27.750
27.250
28.755
28.000
27.625

WIDTH
0.875
0.875
0.750
0.875
0.750
0.875
0.750
0.875
0.750
0.875
0.875
0.750
0.750
0.875
0.875
0.875
0.750
0.750
1.000
0.750
0.875
0.750
0.750
0.875
0.875
1.500
0.875
0.750
0.750
1.000
1.000
0.875
0.750
0.750
0.750
0.875
0.750
0.875
0.875
0.875
0.750
0.750
0.875
0.875
1.500
0.750
0.750
1.000
0.750
1.500
0.875
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-59

Oil Seals by Model Number

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

Garlock

PART NO

SHAFT

BORE

WIDTH

24700-0460
24700-0461
24700-0462
24700-0463
24700-0464
24700-0465
24700-0466
24700-0467
24700-0468
24700-0469
24700-0470
24700-0471
24700-0472
24700-0473
24700-0474
24700-0475
24700-0476
24700-0477
24700-0478
24700-0479
24700-0480
24700-0481
24700-0482
24700-0483
24700-0484
24700-0485
24700-0486
24700-0487
24700-0488
24700-0490
24700-0491
24700-0492
24700-0493
24700-0494
24700-0495
24700-0496
24700-0498
24700-0499
24700-0500
24700-0501
24700-0502
24700-0503
24700-0504
24700-0505
24700-0506
24700-0507
24700-0508
24700-0509
24700-0510
24700-0511
24700-0512
24700-0513

26.000
26.000
26.000
26.125
26.375
26.375
26.375
26.500
26.500
26.500
27.000
27.000
27.000
27.250
27.500
27.500
27.625
27.625
27.875
27.875
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.500
28.500
28.750
29.000
29.000
29.000
29.125
29.500
29.500
29.500
29.500
30.000
30.000
30.000
30.000
30.000
30.250
30.500
30.500
30.500
31.000
31.000
31.000

27.625
28.000
28.500
28.125
28.188
28.250
28.375
28.000
28.500
29.500
29.000
29.500
30.000
29.250
29.000
29.500
29.125
29.625
29.812
29.815
29.500
29.625
29.813
30.000
30.250
30.500
30.535
31.000
32.000
30.500
31.000
30.750
30.500
31.000
32.000
32.000
31.500
32.000
32.250
32.500
31.616
31.625
32.000
32.250
32.500
32.500
32.500
33.000
33.500
32.500
33.000
34.000

0.750
0.750
0.875
0.813
0.750
0.875
1.000
0.750
0.875
1.500
0.750
1.000
0.875
0.813
0.750
0.875
0.750
0.750
0.875
0.875
0.750
0.750
0.750
0.875
1.250
0.875
0.875
0.875
0.875
0.625
0.875
0.875
0.750
0.875
0.875
1.500
0.750
0.875
1.000
0.938
0.750
0.625
0.750
1.156
0.875
0.875
0.750
0.750
0.875
1.000
0.875
0.875

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

PART NO

SHAFT

BORE

WIDTH

24700-0514
24700-0515
24700-0516
24700-0517
24700-0518
24700-0519
24700-0520
24700-0521
24700-0522
24700-0523
24700-0524
24700-0525
24700-0526
24700-0527
24700-0528
24700-0529
24700-0530
24700-0531
24700-0532
24700-0533
24700-0534
24700-0535
24700-0536
24700-0537
24700-0538
24700-0539
24700-0540
24700-0541
24700-0542
24700-0543
24700-0544
24700-0545
24700-0546
24700-0547
24700-0548
24700-0549
24700-0550
24700-0551
24700-0552
24700-0553
24700-0554
24700-0557
24700-0558
24700-0559
24700-0560
24700-0561
24700-0562
24700-0563
24700-0564
24700-0565
24700-0568
24700-0569

31.250
31.750
32.000
32.000
32.125
32.312
32.500
31.750
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.500
33.500
33.500
33.500
33.625
34.000
34.000
34.000
34.000
34.250
34.250
34.500
34.750
34.750
35.000
35.000
35.250
35.375
35.500
36.000
36.000
36.000
36.000
36.500
36.750
36.750
37.000
37.250
37.438
37.500
37.500
37.500
37.795
38.000
38.250

33.250
33.750
34.000
34.500
34.125
34.500
34.500
35.750
34.500
34.609
34.613
34.625
34.630
34.688
35.000
35.250
35.500
35.500
36.000
36.002
36.250
35.625
36.000
36.250
36.500
37.000
36.250
36.750
36.000
36.625
36.750
37.000
37.500
38.250
37.375
37.500
37.998
38.000
38.500
39.500
38.500
38.750
39.250
39.000
39.250
39.500
39.000
39.500
40.250
40.945
40.000
40.250

0.750
0.875
0.875
0.875
0.875
0.875
0.875
1.500
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.875
0.750
0.875
0.875
0.938
0.875
0.875
0.875
1.250
0.875
1.000
0.875
0.875
0.750
0.750
0.875
0.813
0.875
0.750
1.000
0.875
0.875
0.875
0.875
1.500
0.875
1.000
0.875
0.875
0.875
0.875
0.875
0.750
1.000
0.906
0.875
0.875

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-60

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-0570
24700-0571
24700-0577
24700-0578
24700-0579
24700-0580
24700-0581
24700-0582
24700-0583
24700-0584
24700-0585
24700-0586
24700-0587
24700-0588
24700-0589
24700-0590
24700-0591
24700-0592
24700-0593
24700-0594
24700-0595
24700-0596
24700-0597
24700-0598
24700-0599
24700-0600
24700-0601
24700-0602
24700-0603
24700-0604
24700-0605
24700-0606
24700-0607
24700-0608
24700-0610
24700-0611
24700-0612
24700-0613
24700-0614
24700-0615
24700-0616
24700-0617
24700-0618
24700-0782
24700-0820
24700-0821
24700-0824
24700-0844
24700-0982
24700-0986
24700-0992
24700-0999

38.250
38.258
38.500
38.750
39.000
39.000
39.750
39.979
40.000
40.500
40.500
41.500
41.812
41.938
42.250
43.000
43.500
43.750
44.000
44.000
44.000
44.500
45.000
45.000
45.750
46.000
46.500
47.000
47.750
48.250
49.000
49.500
50.000
52.500
53.000
54.000
54.750
55.500
57.875
59.000
61.250
62.500
62.500
17.000
28.000
25.000
21.438
6.750
11.024
23.375
14.173
12.204

40.750
40.750
41.000
40.750
41.000
41.500
42.250
41.500
42.000
42.500
43.000
43.500
45.000
43.750
44.250
45.000
45.500
45.750
46.000
46.500
47.000
46.000
46.750
47.000
47.768
48.000
48.500
49.000
50.500
50.250
50.750
52.250
52.000
55.000
54.875
56.000
56.375
57.500
60.000
61.000
63.250
64.000
64.500
19.000
30.500
27.500
23.188
8.250
12.205
25.375
15.354
13.780

WIDTH
0.750
0.875
1.000
0.875
0.750
0.875
0.875
1.000
0.875
0.875
0.875
0.875
1.000
0.875
1.000
0.875
0.750
0.875
0.875
0.875
1.250
0.875
0.875
0.875
0.875
0.875
0.875
0.875
1.125
0.875
1.000
1.000
0.875
0.875
0.813
1.000
0.875
0.750
0.938
0.875
1.000
0.875
0.875
1.000
1.000
1.000
0.750
0.562
0.630
0.812
0.709
0.787

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-1000
24700-1006
24700-1013
24700-1020
24700-1024
24700-1043
24700-1044
24700-1050
24700-1068
24700-1070
24700-1134
24700-1135
24700-1246
24700-1247
24700-1331
24700-1332
24700-1343
24700-1741
24700-1867
24700-1868
24700-1869
24700-1875
24700-1892
24700-1895
24700-1902
24700-1904
24700-1931
24700-1933
24700-1959
24700-1966
24700-1971
24700-1977
24700-1989
24700-1990
24700-1991
24700-1992
24700-1993
24700-1994
24700-1995
24700-1996
24700-1997
24700-1998
24700-1999
24700-2000
24700-2018
24700-2022
24700-2043
24700-2044
24700-2049
24700-2126
24700-2183
24700-2189

12.992
30.000
20.000
16.250
6.000
33.858
25.590
12.500
8.250
24.803
5.512
22.000
19.685
18.898
16.531
15.748
9.375
8.625
17.000
12.250
12.250
11.625
14.173
7.750
13.780
11.250
22.750
30.709
43.500
12.598
27.000
20.000
19.938
20.500
21.000
21.250
21.500
21.750
22.500
28.125
28.500
29.134
30.000
36.500
13.625
15.938
7.480
9.469
15.354
20.000
7.677
9.725

15.354
32.000
21.500
17.750
7.500
35.433
27.165
14.500
10.250
26.750
6.693
24.000
21.654
20.866
18.504
17.480
11.000
10.500
19.000
14.250
14.000
13.000
15.748
8.750
16.142
12.750
25.500
33.228
45.500
14.173
29.000
22.000
21.688
22.500
23.000
23.250
22.688
23.250
23.688
29.250
30.500
30.709
31.625
39.000
14.875
18.000
8.661
10.625
17.717
21.500
9.055
11.750

WIDTH
0.984
0.875
0.750
0.687
0.625
0.787
0.787
0.906
0.750
0.875
0.630
0.875
0.866
0.787
0.866
0.787
0.625
0.750
0.812
0.812
0.875
0.750
0.787
0.625
0.787
0.750
0.875
0.984
0.875
0.709
1.000
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.687
0.750
0.591
0.625
0.984
0.875
0.591
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-61

Oil Seals by Model Number

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

Garlock

PART NO

SHAFT

BORE

WIDTH

24700-2229
24700-2493
24700-2521
24700-2543
24700-2565
24700-2569
24700-2620
24700-2654
24700-2691
24700-2703
24700-2724
24700-2726
24700-2873
24700-2906
24700-2914
24700-2936
24700-2980
24700-2981
24700-2991
24700-2992
24700-3003
24700-3042
24700-3080
24700-3091
24700-3100
24700-3132
24700-3133
24700-3134
24700-3140
24700-3150
24700-3171
24700-3172
24700-3212
24700-3220
24700-3250
24700-3256
24700-3279
24700-3281
24700-3352
24700-3355
24700-3367
24700-3369
24700-3424
24700-3426
24700-3427
24700-3428
24700-3454
24700-3461
24700-3464
24700-3470
24700-3489
24700-3490

20.000
15.875
41.625
28.740
16.500
11.500
10.688
19.625
18.000
4.331
21.654
15.748
39.370
11.500
9.750
12.500
12.000
20.000
37.795
7.625
14.125
16.250
39.370
13.780
11.417
29.921
19.291
23.228
9.875
9.000
42.500
48.000
13.780
19.938
32.750
22.000
26.500
5.750
6.102
6.000
6.000
22.375
6.437
6.500
10.500
23.750
12.366
22.047
6.750
44.000
27.165
13.779

21.500
17.500
44.000
31.260
18.500
13.000
12.500
21.625
19.500
5.512
23.622
17.716
41.339
13.000
10.750
14.000
14.000
22.000
40.157
8.750
15.625
18.500
41.338
15.748
13.780
31.890
20.866
24.803
11.875
10.500
45.000
50.000
14.961
21.688
34.500
23.750
28.000
7.000
7.087
7.000
7.500
25.250
7.687
7.500
11.500
25.250
14.500
24.016
8.250
47.000
28.740
15.748

0.687
0.750
0.875
0.984
0.812
0.687
0.625
0.812
0.750
0.551
0.866
0.748
0.906
0.750
0.625
0.687
0.937
1.000
0.875
0.625
0.750
0.812
0.875
0.984
0.984
0.984
0.787
0.787
0.969
0.687
0.750
1.000
0.630
0.625
0.875
0.875
0.875
0.500
0.591
0.500
0.500
0.875
0.625
0.625
0.625
0.875
0.750
0.787
0.625
0.875
0.787
0.669

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

PART NO

SHAFT

BORE

WIDTH

24700-3492
24700-3500
24700-3512
24700-3527
24700-3535
24700-3539
24700-3544
24700-3548
24700-3552
24700-3573
24700-3578
24700-3588
24700-3596
24700-3606
24700-3613
24700-3631
24700-3640
24700-3644
24700-3660
24700-3665
24700-3667
24700-3682
24700-3685
24700-3691
24700-3693
24700-3695
24700-3699
24700-3710
24700-3718
24700-3726
24700-3740
24700-3741
24700-3768
24700-3769
24700-3773
24700-3793
24700-3816
24700-3817
24700-3819
24700-3832
24700-3837
24700-3853
24700-3866
24700-3868
24700-3876
24700-3880
24700-3882
24700-3903
24700-3919
24700-3935
24700-3943
24700-3945

7.000
7.000
7.125
7.250
20.866
20.000
7.500
7.500
7.500
70.000
7.750
7.875
8.000
8.250
11.250
8.375
9.500
9.500
10.000
10.500
20.866
10.750
10.750
11.000
11.000
11.024
37.500
12.000
12.875
14.000
16.929
17.000
8.000
22.441
20.750
17.000
8.125
8.250
8.250
8.875
29.921
12.000
14.500
16.500
30.500
14.567
13.386
64.000
6.693
8.500
17.716
26.378

8.000
8.500
8.500
8.750
23.228
21.250
8.500
8.750
9.000
72.000
9.250
9.375
9.250
9.500
13.250
9.750
10.750
11.250
11.000
11.750
22.835
11.750
12.250
12.000
12.500
12.598
39.500
14.250
14.750
16.250
18.898
18.750
9.500
24.016
22.750
18.250
10.135
9.250
10.000
10.125
32.008
14.000
16.250
17.750
32.500
16.299
14.961
65.375
7.874
9.500
19.291
27.953

0.625
0.625
0.625
0.750
0.984
0.625
0.625
0.625
0.625
0.875
0.625
0.625
0.625
0.625
0.812
0.750
0.625
0.625
0.562
0.625
0.866
0.562
0.562
0.625
0.625
0.787
0.875
1.000
1.000
1.000
0.866
0.750
0.687
0.787
0.875
0.625
0.750
0.625
0.750
0.625
0.866
0.625
0.625
0.750
0.875
0.787
0.709
0.875
0.630
0.625
0.787
0.787

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-62

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-3949
24700-3950
24700-3951
24700-3955
24700-3961
24700-3992
24700-4002
24700-4003
24700-4006
24700-4008
24700-4009
24700-4019
24700-4028
24700-4029
24700-4035
24700-4038
24700-4041
24700-4047
24700-4049
24700-4051
24700-4056
24700-4058
24700-4066
24700-4072
24700-4082
24700-4086
24700-4093
24700-4095
24700-4097
24700-4098
24700-4100
24700-4127
24700-4137
24700-4142
24700-4147
24700-4155
24700-4162
24700-4180
24700-4188
24700-4198
24700-4216
24700-4231
24700-4241
24700-4243
24700-4244
24700-4245
24700-4246
24700-4251
24700-4252
24700-4254
24700-4255
24700-4256

42.520
15.354
8.750
9.055
63.780
10.000
16.339
10.125
10.500
10.250
11.811
22.047
11.024
12.402
9.055
6.299
12.250
19.685
10.250
11.375
11.811
12.795
22.047
12.000
12.500
12.625
13.000
13.000
26.375
13.000
38.976
13.500
41.432
14.500
14.750
15.000
15.500
16.000
17.000
17.500
18.500
20.000
22.441
22.047
25.590
22.441
20.500
13.500
16.929
21.250
18.504
22.835

45.039
17.323
10.750
10.236
65.551
11.500
18.307
12.000
12.500
12.250
13.071
24.016
12.598
13.976
10.629
7.874
13.750
21.260
11.250
13.000
13.543
14.370
23.780
14.000
14.500
14.125
14.500
14.625
28.188
15.000
40.945
15.500
43.307
16.000
16.250
17.000
17.000
18.000
18.500
19.500
20.500
22.000
24.409
24.409
27.756
24.409
22.500
15.000
18.504
23.250
20.866
25.197

WIDTH
0.984
0.787
0.750
0.591
0.787
0.687
0.787
0.750
0.625
0.625
0.630
0.866
0.709
0.709
0.551
0.551
0.625
0.787
0.500
0.750
0.787
0.630
0.787
0.812
0.750
0.750
0.687
0.750
0.875
0.750
0.866
0.750
0.787
0.688
0.688
0.750
0.750
0.812
0.687
0.687
0.875
0.625
0.984
0.984
0.787
0.866
0.875
0.687
0.787
0.875
0.984
0.984

MODEL NO

PART NO

SHAFT

BORE

59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

24700-4269
24700-4294
24700-4360
24700-4376
24700-4393
24700-4394
24700-4396
24700-4397
24700-4405
24700-4423
24700-4429
24700-4454
24700-4481
24700-4486
24700-4487
24700-4494
24700-4496
24700-4501
24700-4503
24700-4505
24700-4508
24700-4512
24700-4514
24700-4515
24700-4516
24700-4517
24700-4518
24700-4519
24700-4525
24700-4534
24700-4555
24700-4573
24700-4578
24700-4583
24700-4584
24700-4598
24700-4599
24700-4600
24700-4612
24700-4621
24700-4626
24700-4646
24700-4671
24700-4672
24700-4673
24700-4674
24700-4755
24700-4763
24700-4764
24700-4767
24700-4803
24700-4824

22.000
24.000
25.437
30.500
17.323
14.173
15.748
12.598
34.500
14.764
15.748
28.500
9.250
18.110
28.740
24.250
12.500
8.438
9.000
9.000
18.110
16.142
21.654
9.750
28.740
25.590
23.622
23.622
20.472
16.750
14.625
11.437
30.615
34.000
38.000
21.260
49.213
17.874
12.000
12.500
27.250
19.500
31.890
26.378
17.323
14.961
13.780
9.055
20.472
10.039
9.125
37.402

23.500
26.000
27.187
33.000
18.898
15.748
17.322
14.173
36.500
16.535
17.716
30.500
11.250
20.078
31.259
26.000
14.000
10.000
10.000
10.250
19.685
17.717
24.016
11.000
31.102
27.953
25.984
25.590
22.205
18.500
16.000
13.750
33.268
37.000
40.000
23.228
51.732
19.874
13.500
14.008
29.250
21.750
34.409
28.898
19.291
16.693
14.961
10.630
22.205
11.417
10.375
39.921

WIDTH
0.750
0.875
0.750
1.000
0.787
0.709
0.787
0.787
0.875
0.787
0.761
0.875
0.562
0.866
1.007
1.000
0.625
0.625
0.625
0.625
0.787
0.787
0.984
0.625
0.984
0.984
0.984
0.866
0.866
0.687
0.625
0.625
1.094
0.875
0.625
0.866
0.984
0.843
0.688
0.906
0.875
0.875
0.984
0.984
0.866
0.787
0.787
0.630
0.787
0.630
0.625
0.984

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-63

Oil Seals by Model Number

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59

Garlock

PART NO

SHAFT

BORE

WIDTH

24700-4858
24700-4875
24700-4879
24700-4891
24700-4917
24700-4936
24700-4950
24700-4999
24700-5054
24700-5064
24700-5079
24700-5102
24700-5107
24700-5111
24700-5162
24700-5170
24700-5172
24700-5280
24700-5281
24700-5287
24700-5299
24700-5317
24700-5324
24700-5335
24700-5339
24700-5357
24700-5359
24700-5377
24700-5421
24700-5429
24700-5438
24700-5440
24700-5441
24700-5442
24700-5447
24700-5452
24700-5464
24700-5465
24700-5466
24700-5477
24700-5525
24700-5559
24700-5560
24700-5581
24700-5595
24700-5620
24700-5693
24700-5694
24700-5711
24700-5740
24700-5802
24700-5814

10.992
30.315
19.125
10.236
29.921
15.354
10.000
10.236
17.500
15.748
19.375
13.780
13.780
10.236
25.500
13.386
15.354
23.622
15.354
6.750
15.236
7.874
7.468
5.906
9.843
8.661
9.449
22.375
15.500
10.236
20.866
20.945
13.976
28.938
47.500
21.063
17.717
10.750
14.961
13.780
12.992
23.622
31.496
12.125
35.500
35.433
12.205
14.567
13.750
13.250
11.688
9.055

12.402
33.268
21.125
12.402
31.496
17.323
11.500
12.598
19.250
17.323
21.000
15.512
15.512
11.418
27.500
14.961
16.929
25.197
17.087
7.750
16.417
9.055
8.468
7.087
11.024
9.842
10.630
25.250
17.500
11.812
22.441
22.520
15.551
30.512
49.500
22.638
20.079
12.750
17.323
16.142
14.724
25.591
34.015
13.875
38.000
38.583
14.173
16.339
15.750
15.250
13.000
10.630

0.787
1.063
0.812
0.945
0.787
0.984
0.625
0.984
0.688
0.630
0.750
0.787
0.748
0.630
0.875
0.787
0.709
0.787
0.787
0.750
0.591
0.630
0.688
0.551
0.591
0.594
0.594
1.125
0.812
0.787
0.787
0.787
0.787
0.787
0.875
0.787
0.984
0.625
0.984
0.984
0.787
0.984
0.984
0.687
1.000
0.906
0.984
0.787
1.000
1.000
0.750
0.591

MODEL NO
59
59
59
59
59
59
59
59
59
59
59
59
59
59
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

PART NO

SHAFT

BORE

WIDTH

24700-5932
24700-5987
24700-6386
24700-6508
24700-6646
24700-6808
24700-7059
24700-7263
24700-7268
24700-7388
24700-7805
24700-7832
24700-8655
24700-9477
24060-0005
24060-0013
24060-0015
24060-0017
24060-0023
24060-0024
24060-0049
24060-0087
24060-0089
24060-0090
24060-0091
24060-0093
24060-0109
24060-0132
24060-0139
24060-0141
24060-0143
24060-0147
24060-0149
24060-0213
24060-0215
24060-0287
24060-0288
24060-0290
24060-0291
24060-0292
24060-0293
24060-0297
24060-0312
24060-0320
24060-0325
24060-0352
24060-0353
24060-0357
24060-0359
24060-0387
24060-0427
24060-0436

9.438
14.563
8.750
19.000
8.875
10.000
18.500
11.500
6.693
7.874
13.000
11.250
10.630
20.000
0.313
0.375
0.375
0.375
0.375
0.472
0.500
0.625
0.625
0.625
0.625
0.625
0.687
1.575
0.750
0.750
0.750
0.750
0.750
0.875
0.875
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.181
1.181
1.063
1.125
1.125
1.125
1.125
1.188
1.250
1.250

11.500
16.000
10.000
21.000
10.875
11.250
20.500
12.750
7.875
9.055
14.500
12.750
12.205
22.000
0.750
0.750
0.875
1.000
1.375
1.102
1.000
1.125
1.250
1.250
1.375
1.500
1.125
2.441
1.250
1.375
1.500
1.625
1.750
1.375
1.500
1.500
1.500
1.575
1.625
1.625
1.750
1.875
1.575
1.850
1.750
1.625
1.750
1.875
2.000
2.000
2.000
2.125

1.000
0.625
0.625
0.812
0.750
0.625
0.750
0.625
0.590
0.591
0.625
0.625
0.630
0.875
0.250
0.250
0.250
0.312
0.312
0.276
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.315
0.312
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.375
0.312
0.375
0.375
0.375
0.276
0.276
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-64

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

24060-0439
24060-0442
24060-0535
24060-0541
24060-0544
24060-0556
24060-0571
24060-0574
24060-0592
24060-0595
24060-0598
24060-0643
24060-0646
24060-0653
24060-0655
24060-0658
24060-0664
24060-0667
24060-0703
24060-0706
24060-0710
24060-0712
24060-0729
24060-0738
24060-0758
24060-0760
24060-0772
24060-0788
24060-0809
24060-0813
24060-0829
24060-0835
24060-0844
24060-0853
24060-0859
24060-0882
24060-0904
24060-0907
24060-0913
24060-0917
24060-0924
24060-0928
24060-0976
24060-1033
24060-1042
24060-1048
24060-1057
24060-1059
24060-1076
24060-1092
24060-1117
24060-1120

1.250
1.250
1.375
1.375
1.375
1.375
1.406
2.165
1.438
1.438
1.438
1.500
1.500
2.360
1.500
1.500
1.500
1.500
1.563
1.563
2.559
1.563
2.559
5.438
1.625
1.625
1.625
1.625
2.953
1.750
1.688
1.688
1.688
1.688
1.688
2.165
1.750
1.750
1.750
2.938
1.750
1.750
1.813
3.150
1.875
1.875
1.875
1.875
1.875
1.625
1.937
1.938

2.250
2.375
2.062
2.125
2.250
2.500
2.375
2.756
2.125
2.500
2.375
2.250
2.375
3.150
2.500
2.625
2.750
2.756
2.375
2.438
3.346
2.500
3.543
6.500
2.187
2.375
2.625
2.875
3.937
2.375
2.438
2.500
2.750
2.875
3.000
2.835
2.500
2.625
2.750
4.000
2.875
3.000
2.625
3.937
2.625
2.750
2.875
2.875
3.189
2.250
2.686
2.750

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.315
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.394
0.375
0.394
0.500
0.375
0.375
0.375
0.437
0.394
0.375
0.375
0.375
0.375
0.375
0.375
0.315
0.375
0.375
0.375
0.500
0.500
0.375
0.375
0.394
0.375
0.375
0.375
0.500
0.437
0.375
0.375
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

24060-1129
24060-1153
24060-1156
24060-1189
24060-1190
24060-1198
24060-1204
24060-1205
24060-1247
24060-1251
24060-1257
24060-1268
24060-1271
24060-1272
24060-1274
24060-1281
24060-1319
24060-1320
24060-1321
24060-1325
24060-1328
24060-1334
24060-1337
24060-1338
24060-1343
24060-1344
24060-1354
24060-1355
24060-1356
24060-1358
24060-1361
24060-1362
24060-1364
24060-1367
24060-1368
24060-1370
24060-1371
24060-1372
24060-1373
24060-1378
24060-1386
24060-1399
24060-1409
24060-1412
24060-1418
24060-1419
24060-1421
24060-1429
24060-1431
24060-1440
24060-1446
24060-1458

1.938
1.969
1.969
2.000
2.000
2.000
2.000
2.000
0.750
0.625
0.750
0.875
0.875
1.000
1.000
1.063
1.188
2.125
2.125
1.188
2.125
2.125
1.250
1.250
1.250
1.250
1.375
1.375
1.375
1.438
1.438
1.438
1.500
1.500
1.500
1.563
1.625
1.625
1.625
2.156
1.750
2.188
1.750
1.875
1.875
1.875
2.000
2.000
2.000
3.437
2.000
2.000

2.875
2.750
2.756
2.750
2.750
2.875
3.000
3.000
1.750
1.625
1.875
1.750
1.875
2.000
2.125
1.625
1.750
2.875
2.875
1.875
3.000
3.125
1.875
2.063
2.125
2.250
2.000
2.438
2.750
2.000
2.063
2.188
2.125
2.313
2.875
2.563
2.250
2.375
2.500
3.189
2.438
2.875
2.563
2.500
2.500
2.500
2.500
2.625
2.750
4.500
3.250
3.500

0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.437
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.250
0.312
0.437
0.375
0.312
0.437
0.437
0.312
0.312
0.312
0.312
0.312
0.250
0.375
0.312
0.312
0.375
0.312
0.312
0.375
0.500
0.312
0.312
0.312
0.375
0.312
0.375
0.500
0.312
0.375
0.500
0.375
0.375
0.312
0.437
0.437
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-65

Oil Seals by Model Number

MODEL NO
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

Garlock

PART NO

SHAFT

BORE

WIDTH

24060-1464
24060-1466
24060-1467
24060-1469
24060-1470
24060-1474
24060-1475
24060-1478
24060-1484
24060-1488
24060-1490
24060-1493
24060-1502
24060-1503
24060-1505
24060-1507
24060-1508
24060-1509
24060-1511
24060-1512
24060-1514
24060-1523
24060-1529
24060-1537
24060-1539
24060-1541
24060-1542
24060-1544
24060-1545
24060-1547
24060-1549
24060-1550
24060-1551
24060-1553
24060-1554
24060-1556
24060-1559
24060-1560
24060-1562
24060-1564
24060-1565
24060-1566
24060-1568
24060-1569
24060-1571
24060-1572
24060-1574
24060-1577
24060-1580
24060-1583
24060-1591
24060-1595

2.063
2.063
2.125
3.000
0.866
2.250
2.250
0.984
1.496
4.000
2.362
2.250
4.331
2.250
2.250
2.250
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.438
2.438
2.500
2.500
2.500
2.500
2.500
2.625
2.625
2.625
2.750
2.750
2.875
2.750
2.875
2.938
3.000
3.125
3.125
3.125
3.125
3.188
3.250
3.250
3.250
3.375
3.438
3.500
3.500

2.625
2.875
2.750
3.625
1.575
3.000
3.000
1.378
2.165
4.750
2.953
3.250
5.512
2.875
3.500
2.875
3.125
3.375
3.625
2.875
3.000
3.000
3.375
3.375
3.500
3.125
3.125
3.375
3.500
4.500
3.250
3.250
3.375
3.375
3.375
3.500
5.000
4.000
3.625
3.625
3.750
3.750
3.875
4.000
4.250
3.875
4.000
4.000
4.000
4.125
4.125
4.125

0.375
0.375
0.312
0.437
0.315
0.375
0.437
0.315
0.394
0.500
0.315
0.437
0.512
0.312
0.437
0.375
0.437
0.437
0.437
0.312
0.312
0.437
0.437
0.375
0.437
0.312
0.500
0.437
0.312
0.437
0.312
0.375
0.437
0.312
0.437
0.312
0.500
0.500
0.312
0.312
0.312
0.500
0.500
0.375
0.375
0.312
0.437
0.500
0.312
0.437
0.312
0.500

MODEL NO
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

PART NO

SHAFT

BORE

WIDTH

24060-1599
24060-1601
24060-1604
24060-1605
24060-1606
24060-1607
24060-1611
24060-1613
24060-1614
24060-1624
24060-1640
24060-1642
24060-1643
24060-1646
24060-1649
24060-1652
24060-1655
24060-1666
24060-1667
24060-1670
24060-1674
24060-1676
24060-1679
24060-1682
24060-1683
24060-1684
24060-1685
24060-1686
24060-1687
24060-1724
24060-1731
24060-1734
24060-1739
24060-1747
24060-1748
24060-1754
24060-1760
24060-1761
24060-1763
24060-1776
24060-1784
24060-1787
24060-1789
24060-1792
24060-1793
24060-1796
24060-1797
24060-1808
24060-1814
24060-1820
24060-1828
24060-1835

3.500
3.563
3.563
3.625
3.750
3.875
3.875
3.875
3.875
2.344
3.938
2.375
4.000
4.250
4.250
4.250
2.375
2.375
4.750
5.000
5.250
5.375
5.500
5.500
5.500
5.750
5.750
6.500
6.500
7.125
7.125
7.188
7.250
2.438
0.315
0.669
0.787
0.984
1.181
1.260
1.299
1.378
1.378
1.654
1.654
1.772
1.772
2.500
1.969
2.500
2.500
2.165

4.250
4.500
4.500
4.250
4.375
4.500
4.500
4.625
4.750
3.500
6.250
3.125
4.750
4.875
5.000
5.125
3.250
3.500
5.500
5.625
6.000
6.125
6.250
6.375
6.500
6.375
6.500
7.250
7.500
8.000
8.500
8.438
9.000
3.500
0.709
1.102
1.378
1.653
1.654
1.850
1.772
1.850
1.969
2.362
2.441
2.362
2.441
3.250
2.559
3.500
3.750
2.835

0.500
0.437
0.500
0.312
0.500
0.312
0.500
0.500
0.500
0.375
0.500
0.375
0.375
0.500
0.437
0.500
0.437
0.375
0.500
0.375
0.500
0.500
0.437
0.500
0.250
0.500
0.500
0.500
0.250
0.375
0.500
0.500
0.500
0.375
0.197
0.315
0.315
0.315
0.315
0.315
0.315
0.315
0.394
0.394
0.394
0.315
0.394
0.437
0.394
0.437
0.375
0.394

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-66

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

24060-1839
24060-1842
24060-1847
24060-1848
24060-1854
24060-1856
24060-1859
24060-1880
24060-1884
24060-1898
24060-1912
24060-1931
24060-1939
24060-1966
24060-1993
24060-2035
24060-2037
24060-2038
24060-2049
24060-2057
24060-2059
24060-2073
24060-2074
24060-2082
24060-2119
24060-2123
24060-2146
24060-2148
24060-2149
24060-2150
24060-2151
24060-2168
24060-2169
24060-2170
24060-2173
24060-2177
24060-2212
24060-2218
24060-2224
24060-2225
24060-2231
24060-2234
24060-2241
24060-2266
24060-2273
24060-2276
24060-2280
24060-2282
24060-2296
24060-2297
24060-2321
24060-2324

2.362
2.625
2.559
2.953
3.346
3.543
3.740
4.724
5.315
5.512
1.575
1.575
2.625
5.000
2.688
2.750
2.750
2.756
2.750
2.750
2.880
2.125
4.187
1.969
1.378
2.875
2.938
2.938
2.938
2.938
2.938
3.000
3.000
3.000
3.000
3.063
1.260
1.142
1.260
3.125
3.125
3.125
0.984
2.570
3.250
3.250
0.630
3.250
5.625
3.313
3.375
3.375

3.150
3.625
3.150
3.740
4.331
4.331
4.724
5.906
6.496
6.496
2.362
2.165
3.500
5.750
3.500
3.500
3.500
3.543
3.875
3.750
3.625
2.625
4.999
3.250
1.969
3.875
3.750
3.750
3.875
3.875
3.875
3.750
3.750
3.750
3.875
4.125
2.047
1.575
1.772
4.125
4.375
4.500
1.500
3.250
4.375
4.500
1.181
4.750
6.875
4.375
4.375
4.500

0.394
0.437
0.394
0.512
0.394
0.394
0.394
0.512
0.315
0.394
0.394
0.394
0.375
0.500
0.375
0.375
0.500
0.394
0.500
0.375
0.375
0.375
0.468
0.437
0.276
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.438
0.500
0.500
0.500
0.354
0.250
0.315
0.500
0.500
0.500
0.375
0.375
0.500
0.500
0.315
0.500
0.219
0.500
0.500
0.500

MODEL NO

PART NO

SHAFT

BORE

WIDTH

61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

24060-2334
24060-2335
24060-2345
24060-2348
24060-2366
24060-2372
24060-2404
24060-2410
24060-2411
24060-2417
24060-2420
24060-2451
24060-2460
24060-2461
24060-2462
24060-2478
24060-2503
24060-2508
24060-2514
24060-2525
24060-2526
24060-2532
24060-2540
24060-2543
24060-2562
24060-2574
24060-2600
24060-2603
24060-2606
24060-2638
24060-2657
24060-2663
24060-2715
24060-2753
24060-2756
24060-2759
24060-2765
24060-2784
24060-2797
24060-2803
24060-2811
24060-2814
24060-2837
24060-2843
24060-2915
24060-2920
24060-2921
24060-2927
24060-2966
24060-3059
24060-3065
24060-3071

1.188
1.438
3.438
3.437
3.500
3.500
7.125
1.500
3.150
3.625
3.625
2.675
1.399
5.512
3.750
1.938
1.000
2.874
1.922
3.938
2.813
1.693
4.000
4.000
3.320
1.552
4.125
4.125
4.125
3.375
4.250
4.250
1.102
4.500
4.500
4.500
4.500
1.260
2.250
1.181
4.921
2.756
4.750
4.750
5.000
2.687
5.000
5.000
2.953
5.250
5.250
5.250

1.750
1.938
4.500
4.625
4.500
4.750
8.375
2.375
4.134
4.625
4.750
3.350
2.292
7.087
4.750
2.500
2.047
3.543
2.875
5.250
3.751
2.756
5.125
5.250
4.132
2.500
5.125
5.250
5.375
5.000
5.250
5.500
1.575
5.500
5.625
5.750
6.000
2.126
2.875
2.047
5.906
3.543
5.750
6.000
6.000
3.375
6.250
6.500
3.937
6.250
6.500
6.750

0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.312
0.394
0.500
0.500
0.375
0.315
0.591
0.500
0.375
0.312
0.393
0.438
0.500
0.438
0.315
0.500
0.500
0.450
0.500
0.500
0.500
0.500
0.468
0.500
0.500
0.394
0.500
0.500
0.500
0.500
0.394
0.438
0.394
0.500
0.472
0.500
0.500
0.500
0.375
0.500
0.500
0.375
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-67

Oil Seals by Model Number

MODEL NO
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

Garlock

PART NO

SHAFT

BORE

WIDTH

24060-3077
24060-3122
24060-3176
24060-3182
24060-3188
24060-3355
24060-3596
24060-3600
24060-3660
24060-3853
24060-3863
24060-3892
24060-4557
24060-4582
24060-4651
24060-4798
24060-4804
24060-4873
24060-4892
24060-5023
24060-5079
24060-5239
24060-5562
24060-5704
24060-5872
24060-6077
24060-6285
24060-6363
24060-6374
24060-6377
24060-6378
24060-6450
24060-6471
24060-6656
24060-6859
24060-7016
24060-7086
24060-7097
24060-7159
24060-7246
24060-7374
24060-7383
24060-7386
24060-7388
24060-7396
24060-7415
24060-7596
24060-7727
24060-7807
24060-7839
24060-7979
24060-8020

5.250
5.375
5.500
5.500
5.500
6.000
8.000
8.800
10.000
12.000
0.250
2.000
3.000
2.000
4.000
1.500
3.000
4.500
2.125
3.000
3.750
1.250
1.102
1.250
3.938
0.500
3.500
4.375
7.000
7.250
7.500
6.250
2.750
1.969
0.984
0.500
2.000
3.750
2.813
1.125
3.250
5.512
1.375
7.874
4.331
1.969
2.937
0.188
7.087
3.543
3.937
0.594

7.000
6.375
6.500
6.750
7.000
7.000
9.250
9.500
11.000
14.000
0.750
3.375
4.000
2.625
5.000
2.125
4.250
5.500
2.750
4.000
5.000
1.750
1.850
1.875
4.875
1.125
4.375
5.000
8.000
8.500
8.500
7.250
3.750
2.835
1.850
1.250
2.375
4.375
3.750
2.250
4.250
6.693
2.000
9.055
5.512
3.150
3.937
0.750
8.268
4.724
5.118
1.182

0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.562
0.625
0.250
0.500
0.500
0.312
0.500
0.375
0.500
0.437
0.375
0.375
0.500
0.250
0.394
0.375
0.500
0.250
0.500
0.375
0.500
0.500
0.500
0.437
0.500
0.375
0.375
0.250
0.250
0.312
0.375
0.375
0.500
0.551
0.375
0.591
0.472
0.375
0.375
0.250
0.591
0.472
0.512
0.312

MODEL NO
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

PART NO

SHAFT

BORE

WIDTH

24060-8049
24060-8373
24060-8610
24060-8887
24060-9223
24060-9342
24060-9490
24060-9505
24060-9509
24060-9515
24060-9612
24060-9721
24060-9722
24060-9822
24060-9879
24060-9963
24061-0049
24061-0087
24061-0093
24061-0139
24061-0141
24061-0143
24061-0292
24061-0293
24061-0357
24061-0383
24061-0541
24061-0655
24061-0760
24061-0913
24061-1092
24061-1205
24061-1334
24061-1369
24061-1412
24061-1418
24061-1429
24061-1475
24061-1488
24061-1529
24061-1542
24061-1550
24061-1572
24061-1642
24061-1763
24061-1794
24061-1814
24061-2037
24061-2059
24061-2119
24061-2223
24061-2258

7.480
2.441
1.575
1.250
1.772
1.181
1.000
0.500
0.625
0.875
1.375
11.750
1.500
1.750
4.000
3.543
0.500
0.625
0.625
0.750
0.750
0.750
1.000
1.000
1.125
1.188
1.375
1.500
1.625
1.750
1.625
2.000
2.125
1.500
1.875
1.875
2.000
2.250
4.000
2.375
2.500
2.625
3.250
2.375
1.181
1.496
1.969
2.750
2.880
1.378
1.750
1.969

8.661
3.150
2.441
1.750
2.559
1.850
1.625
1.000
1.250
1.375
2.875
13.750
2.250
2.375
4.625
4.528
1.000
1.125
1.500
1.250
1.375
1.500
1.625
1.750
1.875
1.875
2.125
2.500
2.375
2.750
2.250
3.000
3.125
3.500
2.500
2.500
2.625
3.000
4.750
3.375
3.125
3.250
3.875
3.125
1.654
2.126
2.559
3.500
3.625
1.969
2.812
2.688

0.591
0.394
0.375
0.375
0.394
0.375
0.250
0.250
0.250
0.250
0.375
0.625
0.250
0.312
0.312
0.472
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.312
0.375
0.375
0.437
0.500
0.437
0.500
0.375
0.312
0.375
0.315
0.394
0.394
0.500
0.375
0.276
0.312
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-68

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61

24061-2316
24061-2422
24061-2434
24061-2915
24061-7055
24061-7415
24061-9223
24062-0050
24062-0288
24062-0292
24062-0357
24062-0645
24062-0760
24062-1058
24062-1065
24062-1190
24062-1191
24062-1265
24062-1307
24062-1345
24062-1346
24062-1377
24062-1419
24062-1476
24062-1494
24062-1502
24062-1538
24062-1563
24062-1664
24062-2136
24062-2280
24062-2318
24062-2366
24062-2377
24062-2915
24062-2918
24062-4557
24062-4651
24062-4958
24062-5713
24062-6363
24062-8887
24062-9223
24063-0645
24063-0857
24063-1114
24063-1191
24063-1230
24063-1493
24063-1856
24063-2055
24063-2235

5.625
1.969
1.750
5.000
1.000
1.969
1.772
0.500
1.000
1.000
1.125
1.500
1.625
1.875
1.875
2.000
2.000
0.875
1.125
2.125
2.125
1.750
1.875
2.250
2.250
4.331
2.438
2.312
4.500
1.575
0.630
3.250
3.500
2.953
5.000
5.000
3.000
4.000
2.312
1.500
4.500
1.250
1.772
1.500
1.375
1.938
2.000
2.688
2.250
3.543
1.575
3.750

6.875
2.953
2.812
6.000
1.750
3.150
2.559
1.000
1.500
1.625
1.875
2.250
2.375
2.875
3.000
2.750
2.750
1.625
1.625
3.250
3.250
2.375
2.500
3.000
3.250
5.512
3.375
3.125
5.750
2.283
1.181
3.875
4.500
3.543
6.000
6.125
4.000
5.000
3.250
2.125
5.500
1.750
2.559
2.250
2.000
2.625
2.750
3.625
3.250
4.331
2.165
4.500

0.281
0.315
0.375
0.500
0.250
0.375
0.394
0.375
0.375
0.375
0.375
0.500
0.375
0.437
0.500
0.437
0.500
0.500
0.437
0.375
0.438
0.500
0.500
0.500
0.500
0.512
0.500
0.500
0.437
0.394
0.315
0.375
0.500
0.394
0.500
0.500
0.500
0.500
0.687
0.437
0.375
0.375
0.394
0.500
0.500
0.375
0.500
0.500
0.437
0.394
0.315
0.375

MODEL NO

PART NO

SHAFT

61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

24063-2239
24063-2242
24063-2281
24063-2336
24063-2403
24063-2462
24063-2915
24063-3937
24063-4557
24063-5306
24063-5713
24063-7374
24064-0292
24064-0427
24064-0882
24064-1033
24064-1470
24064-1502
24064-1667
24064-1788
24064-1799
24064-1854
24064-1856
24064-1880
24064-1931
24064-2242
24064-2366
24064-2837
24064-5562
24064-6374
24064-6383
24064-6656
24064-7386
24064-7388
24064-7396
24064-7807
24064-8373
21072-1882
21702-0025
21702-0031
21702-0035
21702-0037
21702-0038
21702-0039
21702-0047
21702-0049
21702-0050
21702-0051
21702-0052
21702-0053
21702-0055
21702-0057

2.500
3.937
6.100
3.375
4.188
3.750
5.000
8.500
3.000
1.000
1.500
3.250
1.000
1.250
2.165
3.150
0.866
4.331
4.750
1.387
1.772
3.346
3.543
4.724
1.575
3.937
3.500
4.750
1.102
7.000
8.500
1.969
1.375
7.874
4.331
7.087
2.441
2.562
0.406
0.406
0.438
0.438
0.438
0.438
0.469
0.500
0.500
0.500
0.500
0.500
0.500
0.500

BORE
3.000
4.724
6.875
4.999
4.999
4.750
6.000
10.000
4.000
1.500
2.125
4.250
1.625
2.000
2.835
3.937
1.575
5.512
5.500
1.850
2.559
4.331
4.331
5.906
2.165
4.724
4.500
5.750
1.850
8.000
9.500
2.835
2.000
9.055
5.512
8.268
3.150
3.481
0.875
1.250
0.875
1.000
1.000
1.125
1.250
1.000
1.000
1.125
1.125
1.250
1.375
1.500

WIDTH
0.375
0.472
0.625
0.500
0.438
0.500
0.500
0.750
0.500
0.250
0.437
0.500
0.375
0.375
0.315
0.394
0.315
0.512
0.500
0.394
0.315
0.394
0.394
0.512
0.394
0.472
0.500
0.500
0.394
0.500
0.500
0.375
0.375
0.591
0.472
0.591
0.394
0.375
0.312
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.312
0.375
0.312
0.312
0.312

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-69

Oil Seals by Model Number

MODEL NO
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

Garlock

PART NO

SHAFT

BORE

WIDTH

21702-0062
21702-0067
21702-0077
21702-0080
21702-0085
21702-0087
21702-0089
21702-0090
21702-0091
21702-0096
21702-0097
21702-0110
21702-0111
21702-0113
21702-0123
21702-0133
21702-0139
21702-0141
21702-0142
21702-0143
21702-0144
21702-0147
21702-0148
21702-0149
21702-0157
21702-0159
21702-0160
21702-0175
21702-0183
21702-0213
21702-0215
21702-0216
21702-0219
21702-0224
21702-0226
21702-0233
21702-0235
21702-0251
21702-0253
21702-0255
21702-0270
21702-0273
21702-0283
21702-0285
21702-0287
21702-0288
21702-0291
21702-0293
21702-0297
21702-0301
21702-0302
21702-0307

0.531
0.562
0.594
0.594
0.594
0.625
0.625
0.625
0.625
0.625
0.656
0.687
0.687
0.687
0.719
0.719
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.781
0.781
0.781
0.812
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.906
0.906
0.937
0.937
0.937
0.969
0.969
0.969
0.969
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.031

1.250
1.125
1.125
1.250
1.575
1.125
1.250
1.250
1.375
1.575
1.125
1.125
1.250
1.375
1.375
1.828
1.250
1.375
1.375
1.500
1.500
1.625
1.625
1.750
1.250
1.375
1.375
1.250
1.625
1.375
1.500
1.500
1.625
1.828
1.875
1.500
1.575
1.500
1.575
1.625
1.500
1.625
2.000
2.062
1.500
1.500
1.625
1.750
1.875
2.000
2.000
1.625

0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.312
0.375
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.312
0.375
0.312
0.437
0.437
0.312
0.312
0.312
0.312
0.312
0.375
0.312
0.375
0.375
0.312
0.375
0.312
0.375
0.375
0.375
0.437
0.312

MODEL NO
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

PART NO

SHAFT

BORE

WIDTH

21702-0323
21702-0325
21702-0338
21702-0351
21702-0353
21702-0355
21702-0357
21702-0359
21702-0362
21702-0383
21702-0385
21702-0387
21702-0388
21702-0390
21702-0424
21702-0425
21702-0427
21702-0430
21702-0439
21702-0441
21702-0445
21702-0484
21702-0490
21702-0496
21702-0505
21702-0507
21702-0517
21702-0529
21702-0535
21702-0541
21702-0542
21702-0543
21702-0544
21702-0546
21702-0548
21702-0550
21702-0551
21702-0552
21702-0565
21702-0592
21702-0595
21702-0597
21702-0598
21702-0600
21702-0609
21702-0624
21702-0643
21702-0644
21702-0645
21702-0646
21702-0648
21702-0655

1.062
1.062
1.093
1.125
1.125
1.125
1.125
1.125
1.125
1.187
1.187
1.187
1.187
1.187
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.312
1.312
1.312
1.312
1.312
1.344
1.344
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.406
1.437
1.437
1.437
1.437
1.437
1.437
1.469
1.500
1.500
1.500
1.500
1.500
1.500

1.625
1.750
1.625
1.625
1.750
1.828
1.875
2.000
2.062
1.875
1.984
2.000
2.000
2.062
1.984
1.984
2.000
2.062
2.250
2.250
2.437
2.062
2.125
2.375
2.500
2.500
2.250
2.500
2.062
2.125
2.125
2.125
2.250
2.250
2.375
2.437
2.437
2.437
2.125
2.125
2.250
2.250
2.375
2.375
2.500
2.437
2.250
2.250
2.250
2.375
2.375
2.500

0.312
0.375
0.375
0.312
0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.437
0.437
0.375
0.437
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.437
0.375
0.437
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.500
0.500
0.375
0.437
0.500
0.375
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-70

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

21702-0657
21702-0664
21702-0670
21702-0700
21702-0703
21702-0705
21702-0706
21702-0707
21702-0712
21702-0717
21702-0730
21702-0752
21702-0760
21702-0762
21702-0769
21702-0772
21702-0774
21702-0826
21702-0829
21702-0835
21702-0837
21702-0841
21702-0843
21702-0859
21702-0874
21702-0898
21702-0901
21702-0904
21702-0906
21702-0907
21702-0909
21702-0913
21702-0915
21702-0928
21702-0931
21702-0937
21702-0972
21702-1042
21702-1046
21702-1048
21702-1050
21702-1057
21702-1059
21702-1063
21702-1069
21702-1075
21702-1114
21702-1117
21702-1129
21702-1135
21702-1150
21702-1153

1.500
1.500
1.531
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.594
5.750
1.625
1.625
1.625
1.625
1.625
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.719
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.781
1.812
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.937
1.937
1.937
1.937
1.969
1.969

2.500
2.750
2.250
2.250
2.375
2.375
2.437
2.437
2.500
2.625
2.375
7.125
2.375
2.375
2.500
2.625
2.625
2.375
2.437
2.500
2.500
2.686
2.686
3.000
2.686
2.437
2.497
2.500
2.500
2.625
2.625
2.750
2.750
3.000
3.062
2.500
2.497
2.625
2.686
2.750
2.750
2.875
2.875
3.000
3.125
3.189
2.625
2.686
2.875
3.000
2.686
2.750

0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.437
0.375
0.500
0.375
0.562
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.437
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

21702-1155
21702-1162
21702-1168
21702-1186
21702-1189
21702-1191
21702-1201
21702-1204
21702-1206
21702-1210
21702-1252
21702-1321
21702-1323
21702-1326
21702-1327
21702-1329
21702-1332
21702-1333
21702-1340
21702-1366
21702-1399
21702-1402
21702-1404
21702-1408
21702-1420
21702-1438
21702-1471
21702-1472
21702-1473
21702-1474
21702-1475
21702-1476
21702-1483
21702-1489
21702-1492
21702-1494
21702-1495
21702-1504
21702-1505
21702-1587
21702-1639
21702-1642
21702-1644
21702-1648
21702-1654
21702-1656
21702-1658
21702-1659
21702-1666
21702-1668
21702-1673
21702-1675

1.962
1.969
1.969
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.062
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.156
2.187
2.187
2.188
2.187
2.187
2.219
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.312
2.375
2.375
2.375
2.075
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375

3.188
2.875
3.000
2.686
2.750
2.750
2.997
3.000
3.000
3.125
2.875
2.875
2.875
2.997
3.000
3.000
3.062
3.125
3.189
3.000
2.875
3.000
3.000
3.125
3.250
3.000
2.997
2.997
2.997
3.000
3.000
3.000
3.147
3.246
3.250
3.250
3.350
3.500
3.500
3.500
3.062
3.125
3.125
3.189
3.250
3.250
3.350
3.350
3.500
3.500
3.623
3.751

0.469
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.500
0.500
0.375
0.500
0.500
0.375
0.437
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.375
0.500
0.375
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.375
0.500
0.437
0.500
0.375
0.500
0.437
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-71

Oil Seals by Model Number

MODEL NO
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

Garlock

PART NO

SHAFT

BORE

WIDTH

21702-1680
21702-1711
21702-1723
21702-1725
21702-1735
21702-1738
21702-1741
21702-1747
21702-1750
21702-1752
21702-1764
21702-1801
21702-1807
21702-1813
21702-1816
21702-1819
21702-1821
21702-1828
21702-1834
21702-1892
21702-1903
21702-1933
21702-1937
21702-1938
21702-1939
21702-1945
21702-1947
21702-1948
21702-1987
21702-1993
21702-2004
21702-2008
21702-2032
21702-2035
21702-2038
21702-2041
21702-2044
21702-2045
21702-2046
21702-2047
21702-2048
21702-2049
21702-2052
21702-2077
21702-2086
21702-2088
21702-2098
21702-2101
21702-2103
21702-2115
21702-2118
21702-2120

2.375
2.406
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.562
2.594
2.625
3.000
3.150
2.625
2.625
2.625
2.625
2.687
2.687
2.687
2.687
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.812
2.812
2.812
2.844
2.844
2.844
2.875
2.875
2.875

3.876
3.623
3.125
3.125
3.250
3.350
3.372
3.500
3.543
3.543
4.003
3.189
3.250
3.372
3.481
3.500
3.500
3.751
4.003
3.623
3.350
3.372
3.937
3.937
3.500
3.623
3.623
3.751
3.372
3.500
3.751
4.003
3.481
3.500
3.543
3.623
3.751
3.751
3.751
3.876
3.876
3.876
4.003
3.500
3.751
3.751
3.623
3.751
3.751
3.623
3.751
3.751

0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.437
0.375
0.375
0.500
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.500
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.500

MODEL NO
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

PART NO

SHAFT

BORE

WIDTH

21702-2124
21702-2143
21702-2146
21702-2147
21702-2154
21702-2168
21702-2170
21702-2171
21702-2172
21702-2174
21702-2175
21702-2176
21702-2177
21702-2180
21702-2183
21702-2186
21702-2198
21702-2201
21702-2225
21702-2231
21702-2237
21702-2261
21702-2270
21702-2273
21702-2276
21702-2282
21702-2297
21702-2321
21702-2324
21702-2327
21702-2336
21702-2345
21702-2348
21702-2366
21702-2367
21702-2369
21702-2372
21702-2393
21702-2396
21702-2402
21702-2408
21702-2417
21702-2421
21702-2462
21702-2474
21702-2501
21702-2504
21702-2519
21702-2522
21702-2531
21702-2537
21702-2540

2.875
2.937
2.937
2.937
2.937
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.125
3.125
3.125
3.187
3.250
3.250
3.250
3.250
3.312
3.375
3.375
3.375
3.375
3.437
3.437
3.500
3.500
3.500
3.500
3.562
3.562
3.562
3.562
3.625
3.625
3.750
3.750
3.875
3.875
3.937
3.937
3.937
4.000
4.000

4.003
3.623
3.751
3.751
4.003
3.751
3.751
3.876
3.876
4.003
4.003
4.003
4.125
4.249
4.375
4.500
4.999
4.125
4.125
4.375
4.625
4.750
4.249
4.375
4.500
4.750
4.375
4.375
4.500
4.625
4.999
4.500
4.625
4.500
4.500
4.625
4.750
4.625
4.750
4.999
5.250
4.625
4.750
4.750
5.250
4.875
4.999
4.999
5.125
5.500
4.999
5.125

0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.438
0.375
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-72

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

21702-2543
21702-2555
21702-2600
21702-2603
21702-2630
21702-2636
21702-2657
21702-2663
21702-2681
21702-2687
21702-2708
21702-2711
21702-2723
21702-2732
21702-2737
21702-2738
21702-2753
21702-2759
21702-2765
21702-2771
21702-2774
21702-2780
21702-2798
21702-2801
21702-2807
21702-2837
21702-2849
21702-2870
21702-2894
21702-2915
21702-2921
21702-2922
21702-2927
21702-2954
21702-2996
21702-3003
21702-3059
21702-3065
21702-3067
21702-3071
21702-3077
21702-3095
21702-3101
21702-3122
21702-3129
21702-3176
21702-3184
21702-3188
21702-3190
21702-3231
21702-3277
21702-3278

4.000
4.000
4.125
4.125
4.187
4.187
4.250
4.250
4.250
4.312
4.375
4.375
4.375
4.437
4.437
4.437
4.500
4.500
4.500
4.500
4.500
4.562
4.625
4.625
4.625
4.750
4.750
4.875
4.937
5.000
5.000
5.000
5.000
5.062
5.125
8.000
5.250
5.250
5.250
5.250
5.250
5.312
5.312
5.375
5.375
5.500
5.500
5.500
5.500
5.625
5.750
5.750

BORE
5.250
5.750
5.125
5.250
5.250
5.500
5.250
5.500
6.250
5.500
5.375
5.500
6.000
5.500
5.625
5.750
5.500
5.750
6.000
6.250
6.375
5.750
5.625
5.750
6.000
5.750
6.250
5.875
6.000
6.000
6.250
6.250
6.500
6.125
6.375
10.000
6.250
6.500
6.500
6.750
7.000
6.500
6.750
6.375
6.625
6.500
6.750
7.000
7.000
6.750
6.750
6.875

WIDTH
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.563
0.500
0.625
0.500
0.625
0.500
0.625
0.500

MODEL NO

PART NO

SHAFT

BORE

62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

21702-3279
21702-3280
21702-3281
21702-3282
21702-3283
21702-3301
21702-3335
21702-3351
21702-3355
21702-3363
21702-3367
21702-3371
21702-3375
21702-3384
21702-3394
21702-3405
21702-3426
21702-3434
21702-3440
21702-3456
21702-3458
21702-3474
21702-3480
21702-3492
21702-3518
21702-3522
21702-3536
21702-3544
21702-3552
21702-3558
21702-3578
21702-3592
21702-3598
21702-3600
21702-3601
21702-3604
21702-3608
21702-3610
21702-3624
21702-3648
21702-3660
21702-3668
21702-3672
21702-3673
21702-3728
21702-3741
21702-3869
21702-3877
21702-3900
21702-3917
21702-3921
21702-3927

5.750
5.750
5.750
5.750
5.750
5.812
5.937
5.937
6.000
6.000
6.000
6.000
6.125
6.125
6.250
6.250
6.500
6.500
6.625
6.750
6.750
6.875
6.875
7.000
7.250
7.250
7.375
7.500
7.500
7.625
7.750
8.000
8.000
8.000
8.000
8.250
8.375
8.500
9.000
9.500
10.000
10.000
10.000
10.000
14.500
18.000
0.562
1.187
2.125
6.437
8.000
8.062

6.875
6.875
7.000
7.000
7.000
7.000
7.000
7.625
7.000
7.250
7.500
7.625
7.125
7.500
7.500
7.750
7.500
8.000
7.875
7.750
7.875
7.875
8.250
8.000
8.250
8.500
8.875
8.500
9.000
8.625
9.250
9.000
9.375
9.500
9.500
9.250
9.750
10.500
11.000
11.500
11.000
11.000
11.500
12.000
16.500
19.500
1.000
2.048
2.882
7.500
9.500
10.000

WIDTH
0.562
0.625
0.500
0.562
0.625
0.562
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.750
1.000
1.000
1.000
0.562
0.750
0.750
1.000
0.750
0.750
0.312
0.375
0.375
0.500
0.687
1.000

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-73

Oil Seals by Model Number

MODEL NO
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62

Garlock

PART NO

SHAFT

BORE

WIDTH

21702-3932
21702-3935
21702-3937
21702-3938
21702-3946
21702-3949
21702-3951
21702-3954
21702-3967
21702-3984
21702-4012
21702-4013
21702-4016
21702-4017
21702-4031
21702-4062
21702-4065
21702-4067
21702-4068
21702-4072
21702-4083
21702-4099
21702-4129
21702-4132
21702-4145
21702-4149
21702-4186
21702-4190
21702-4195
21702-4216
21702-4219
21702-4492
21702-4502
21702-4503
21702-4507
21702-4508
21702-4513
21702-4557
21702-4560
21702-4615
21702-4651
21702-4687
21702-4798
21702-4845
21702-5105
21702-5246
21702-5315
21702-5339
21702-5357
21702-5382
21702-5670
21702-5713

8.125
8.500
8.500
8.500
8.750
8.750
8.750
9.000
9.250
9.500
10.500
10.500
10.500
10.500
10.750
11.500
11.750
12.000
12.000
12.000
12.500
13.000
13.750
14.000
14.500
14.750
16.500
17.000
17.500
18.500
19.000
7.312
8.500
9.000
9.000
9.000
9.750
3.000
6.500
15.250
4.000
0.984
1.500
2.500
0.669
1.500
1.700
9.843
8.661
14.000
12.000
1.500

10.125
9.500
10.000
10.500
10.250
10.500
10.750
10.500
11.250
11.500
12.000
12.125
12.500
12.500
12.750
13.500
13.250
13.500
13.625
14.000
14.500
15.000
15.750
15.500
16.500
16.500
18.500
19.000
19.000
20.500
21.000
8.375
10.000
10.000
10.500
10.625
10.750
4.000
7.500
16.750
5.000
2.048
2.125
3.937
1.375
2.250
2.437
11.024
9.843
16.250
13.500
2.125

0.750
0.625
0.750
0.812
0.687
0.750
0.750
0.687
0.750
0.812
0.750
0.750
0.750
0.812
0.812
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.750
0.812
0.750
0.812
0.812
0.750
0.875
0.875
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.500
0.687
0.500
0.375
0.375
0.375
0.312
0.312
0.375
0.591
0.591
0.812
0.812
0.437

MODEL NO
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
62
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21702-5773
21702-5991
21702-6233
21702-6655
21702-7225
21702-7381
21702-7386
21702-7596
21702-8102
21702-8132
21702-8168
21702-8169
21702-8373
21702-8876
21702-9015
21702-9438
21702-9488
21702-9595
21702-9620
21702-9808
21158-0001
21158-0005
21158-0006
21158-0007
21158-0008
21158-0009
21158-0010
21158-0011
21158-0013
21158-0014
21158-0015
21158-0016
21158-0017
21158-0018
21158-0019
21158-0020
21158-0021
21158-0023
21158-0027
21158-0029
21158-0031
21158-0034
21158-0035
21158-0036
21158-0037
21158-0038
21158-0039
21158-0040
21158-0041
21158-0042
21158-0043
21158-0044

11.500
14.000
0.937
1.375
18.750
12.250
1.375
2.937
0.500
4.835
3.750
6.125
2.437
3.062
3.469
8.875
1.578
15.750
1.750
1.000
0.281
0.313
0.313
0.313
0.313
0.343
0.343
0.343
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.406
0.406
0.406
0.406
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.469
0.469

13.000
15.750
1.375
2.047
20.750
13.750
2.000
3.937
1.378
6.250
4.885
7.625
3.150
4.003
4.500
10.750
2.687
17.250
2.441
1.750
0.750
0.750
0.750
0.875
0.875
0.750
0.750
0.875
0.750
0.750
0.875
0.875
1.000
1.000
1.125
1.125
1.250
1.375
1.000
1.125
1.250
1.375
0.875
0.875
1.000
1.000
1.125
1.125
1.250
1.250
1.000
1.000

0.812
0.687
0.312
0.375
0.875
0.812
0.375
0.375
0.312
0.500
0.500
0.500
0.375
0.375
0.500
0.750
0.375
0.750
0.375
0.312
0.250
0.250
0.312
0.250
0.312
0.250
0.312
0.250
0.250
0.312
0.250
0.312
0.312
0.375
0.312
0.375
0.312
0.312
0.312
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-74

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-0045
21158-0046
21158-0047
21158-0049
21158-0050
21158-0051
21158-0052
21158-0053
21158-0054
21158-0055
21158-0056
21158-0057
21158-0058
21158-0059
21158-0060
21158-0061
21158-0062
21158-0063
21158-0065
21158-0067
21158-0068
21158-0069
21158-0070
21158-0071
21158-0072
21158-0073
21158-0075
21158-0077
21158-0078
21158-0079
21158-0080
21158-0081
21158-0082
21158-0083
21158-0084
21158-0085
21158-0087
21158-0088
21158-0089
21158-0090
21158-0091
21158-0092
21158-0093
21158-0094
21158-0095
21158-0096
21158-0097
21158-0098
21158-0099
21158-0100
21158-0101
21158-0102

0.469
0.469
0.469
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.531
0.531
0.531
0.531
0.531
0.531
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.656
0.656
0.656
0.656
0.656
0.656

1.125
1.125
1.250
1.000
1.000
1.125
1.125
1.250
1.250
1.375
1.375
1.500
1.500
1.125
1.125
1.250
1.250
1.375
1.500
1.125
1.125
1.250
1.250
1.375
1.375
1.500
1.575
1.125
1.125
1.250
1.250
1.375
1.375
1.500
1.500
1.575
1.125
1.125
1.250
1.250
1.375
1.375
1.500
1.500
1.575
1.575
1.125
1.125
1.250
1.250
1.375
1.375

0.312
0.375
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-0103
21158-0104
21158-0105
21158-0106
21158-0107
21158-0108
21158-0109
21158-0110
21158-0111
21158-0112
21158-0113
21158-0114
21158-0115
21158-0116
21158-0121
21158-0123
21158-0124
21158-0125
21158-0126
21158-0127
21158-0129
21158-0131
21158-0133
21158-0135
21158-0137
21158-0139
21158-0140
21158-0141
21158-0142
21158-0143
21158-0144
21158-0145
21158-0146
21158-0147
21158-0148
21158-0149
21158-0150
21158-0151
21158-0152
21158-0153
21158-0155
21158-0156
21158-0157
21158-0158
21158-0159
21158-0160
21158-0161
21158-0162
21158-0163
21158-0165
21158-0166
21158-0167

0.656
0.656
0.656
0.656
0.656
0.656
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781

1.500
1.500
1.575
1.575
1.625
1.625
1.125
1.125
1.250
1.250
1.375
1.375
1.500
1.500
1.250
1.375
1.375
1.500
1.500
1.575
1.625
1.750
1.828
1.875
1.984
1.250
1.250
1.375
1.375
1.500
1.500
1.575
1.575
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.984
1.984
1.250
1.250
1.375
1.375
1.500
1.500
1.575
1.625
1.625
1.750

0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.375
0.312
0.375
0.312
0.312
0.375
0.375
0.375
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.375
0.437
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-75

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-0169
21158-0170
21158-0171
21158-0172
21158-0173
21158-0175
21158-0176
21158-0177
21158-0178
21158-0179
21158-0180
21158-0181
21158-0182
21158-0183
21158-0185
21158-0186
21158-0187
21158-0189
21158-0191
21158-0192
21158-0193
21158-0195
21158-0197
21158-0199
21158-0201
21158-0204
21158-0207
21158-0211
21158-0213
21158-0214
21158-0215
21158-0216
21158-0217
21158-0218
21158-0219
21158-0220
21158-0221
21158-0222
21158-0223
21158-0224
21158-0225
21158-0226
21158-0227
21158-0228
21158-0229
21158-0231
21158-0233
21158-0234
21158-0235
21158-0236
21158-0237
21158-0239

0.781
0.781
0.781
0.781
0.781
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.844
0.844
0.844
0.844
0.844
0.844
0.844
0.844
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.906
0.906
0.906
0.906
0.906
0.906

1.828
1.828
1.875
1.875
1.984
1.250
1.250
1.375
1.375
1.500
1.500
1.575
1.575
1.625
1.750
1.750
1.828
1.875
1.984
1.984
1.375
1.500
1.575
1.625
1.750
1.828
1.984
2.062
1.375
1.375
1.500
1.500
1.575
1.575
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.875
1.984
1.984
2.000
2.062
1.500
1.500
1.575
1.575
1.625
1.750

0.375
0.437
0.375
0.437
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.437
0.375
0.375
0.375
0.437
0.312
0.312
0.312
0.312
0.375
0.437
0.375
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.375
0.312
0.375
0.312
0.375
0.312
0.375

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21158-0243
21158-0245
21158-0247
21158-0251
21158-0252
21158-0253
21158-0255
21158-0256
21158-0257
21158-0258
21158-0259
21158-0260
21158-0261
21158-0263
21158-0264
21158-0265
21158-0266
21158-0267
21158-0268
21158-0269
21158-0270
21158-0271
21158-0273
21158-0274
21158-0275
21158-0276
21158-0277
21158-0278
21158-0279
21158-0281
21158-0282
21158-0283
21158-0285
21158-0286
21158-0287
21158-0288
21158-0289
21158-0290
21158-0291
21158-0292
21158-0293
21158-0294
21158-0295
21158-0296
21158-0297
21158-0298
21158-0299
21158-0300
21158-0301
21158-0302
21158-0303
21158-0304

0.906
0.906
0.906
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000

1.875
1.984
2.000
1.500
1.500
1.575
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.984
1.625
2.000
2.000
2.062
2.062
1.500
1.500
1.575
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.984
1.686
2.000
2.062
2.062
1.500
1.500
1.575
1.575
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.875
1.984
1.984
2.000
2.000
2.062
2.062

0.375
0.375
0.375
0.312
0.375
0.312
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.375
0.437
0.375
0.437
0.375
0.437
0.312
0.375
0.312
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.375
0.312
0.375
0.375
0.437
0.312
0.375
0.312
0.375
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-76

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-0305
21158-0306
21158-0307
21158-0308
21158-0309
21158-0310
21158-0311
21158-0313
21158-0314
21158-0315
21158-0317
21158-0319
21158-0321
21158-0322
21158-0323
21158-0324
21158-0325
21158-0326
21158-0327
21158-0328
21158-0329
21158-0330
21158-0331
21158-0333
21158-0334
21158-0335
21158-0336
21158-0337
21158-0339
21158-0341
21158-0344
21158-0346
21158-0347
21158-0349
21158-0351
21158-0352
21158-0353
21158-0354
21158-0355
21158-0356
21158-0357
21158-0358
21158-0359
21158-0360
21158-0361
21158-0362
21158-0363
21158-0365
21158-0367
21158-0369
21158-0370
21158-0372

1.031
1.031
1.031
1.031
1.031
1.000
1.062
1.031
1.062
1.031
1.031
1.031
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.156
1.156
1.156
1.156
1.156
1.156

1.575
1.575
1.625
1.625
1.750
1.686
1.686
1.875
1.499
1.984
2.000
2.062
1.575
1.575
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.875
1.984
2.000
2.000
2.062
2.062
1.625
1.750
1.828
1.875
1.984
2.000
2.062
1.625
1.625
1.750
1.750
1.828
1.828
1.875
1.875
2.000
2.000
2.062
2.062
1.875
1.984
2.000
2.062
2.062
2.106

0.312
0.375
0.312
0.375
0.375
0.312
0.312
0.375
0.312
0.375
0.375
0.375
0.312
0.375
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.375
0.437
0.375
0.437
0.312
0.375
0.375
0.437
0.437
0.375
0.375
0.312
0.375
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.375
0.375
0.375
0.437
0.437

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-0374
21158-0377
21158-0380
21158-0383
21158-0384
21158-0385
21158-0386
21158-0387
21158-0388
21158-0389
21158-0390
21158-0394
21158-0395
21158-0397
21158-0398
21158-0399
21158-0400
21158-0401
21158-0402
21158-0403
21158-0405
21158-0413
21158-0415
21158-0421
21158-0424
21158-0425
21158-0426
21158-0427
21158-0428
21158-0430
21158-0431
21158-0433
21158-0436
21158-0437
21158-0438
21158-0439
21158-0440
21158-0441
21158-0442
21158-0443
21158-0444
21158-0445
21158-0446
21158-0447
21158-0448
21158-0451
21158-0454
21158-0457
21158-0462
21158-0463
21158-0465
21158-0471

1.156
1.156
1.156
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.219
1.219
1.219
1.219
1.219
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.281
1.281
1.281
1.281
1.281
1.281
1.281
1.281

2.125
2.250
2.375
1.875
1.875
1.984
1.984
2.000
2.000
2.062
2.062
2.125
2.125
2.250
2.250
2.250
2.375
2.375
2.375
1.984
2.000
2.125
2.250
2.437
1.984
1.984
1.984
2.000
2.000
2.062
2.062
2.106
2.125
2.125
2.125
2.250
2.250
2.250
2.375
2.375
2.375
2.437
2.437
2.437
1.984
2.000
2.062
2.106
2.125
2.250
2.250
2.437

0.375
0.375
0.375
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.437
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-77

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-0474
21158-0475
21158-0478
21158-0481
21158-0482
21158-0484
21158-0485
21158-0487
21158-0490
21158-0491
21158-0492
21158-0493
21158-0494
21158-0495
21158-0496
21158-0497
21158-0498
21158-0499
21158-0505
21158-0507
21158-0508
21158-0511
21158-0514
21158-0515
21158-0517
21158-0520
21158-0523
21158-0525
21158-0526
21158-0529
21158-0532
21158-0535
21158-0536
21158-0537
21158-0538
21158-0539
21158-0540
21158-0541
21158-0542
21158-0543
21158-0544
21158-0545
21158-0546
21158-0547
21158-0548
21158-0549
21158-0550
21158-0551
21158-0552
21158-0553
21158-0554
21158-0555

1.281
1.281
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375

2.497
2.500
1.984
2.000
2.000
2.062
2.062
2.106
2.125
2.125
2.125
2.250
2.250
2.250
2.375
2.375
2.375
2.437
2.500
2.500
2.062
2.106
2.125
2.125
2.250
2.375
2.437
2.437
2.497
2.500
2.625
2.062
2.062
2.062
2.106
2.106
2.106
2.125
2.125
2.125
2.250
2.250
2.250
2.375
2.375
2.375
2.437
2.437
2.437
2.497
2.497
2.497

0.500
0.375
0.375
0.375
0.437
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21158-0556
21158-0557
21158-0559
21158-0560
21158-0561
21158-0562
21158-0565
21158-0566
21158-0568
21158-0571
21158-0580
21158-0583
21158-0592
21158-0593
21158-0594
21158-0595
21158-0596
21158-0597
21158-0598
21158-0599
21158-0600
21158-0601
21158-0602
21158-0603
21158-0604
21158-0605
21158-0607
21158-0608
21158-0609
21158-0610
21158-0612
21158-0613
21158-0615
21158-0616
21158-0619
21158-0621
21158-0622
21158-0624
21158-0628
21158-0634
21158-0638
21158-0640
21158-0643
21158-0644
21158-0645
21158-0646
21158-0647
21158-0648
21158-0649
21158-0650
21158-0651
21158-0652

1.375
1.375
1.375
1.375
1.375
1.375
1.406
1.406
1.406
1.406
1.406
1.406
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500

2.500
2.500
2.625
2.625
2.625
2.561
2.125
2.125
2.250
2.375
2.500
2.625
2.125
2.125
2.125
2.250
2.250
2.250
2.375
2.375
2.375
2.437
2.437
2.437
2.497
2.497
2.500
2.500
2.500
2.625
2.625
2.686
2.686
2.250
2.375
2.375
2.437
2.437
2.500
2.686
2.750
2.756
2.250
2.250
2.250
2.375
2.375
2.375
2.437
2.437
2.437
2.497

0.375
0.437
0.375
0.437
0.500
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-78

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-0654
21158-0655
21158-0656
21158-0657
21158-0658
21158-0659
21158-0660
21158-0661
21158-0664
21158-0665
21158-0666
21158-0667
21158-0668
21158-0669
21158-0670
21158-0673
21158-0679
21158-0682
21158-0685
21158-0693
21158-0694
21158-0700
21158-0701
21158-0702
21158-0703
21158-0704
21158-0706
21158-0707
21158-0708
21158-0709
21158-0712
21158-0713
21158-0714
21158-0715
21158-0717
21158-0718
21158-0721
21158-0722
21158-0723
21158-0724
21158-0725
21158-0727
21158-0728
21158-0730
21158-0734
21158-0739
21158-0742
21158-0744
21158-0747
21158-0748
21158-0750
21158-0751

1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594

2.497
2.500
2.500
2.500
2.625
2.625
2.625
2.686
2.750
2.750
2.750
2.756
2.756
2.756
2.250
2.375
2.497
2.500
2.625
2.750
2.756
2.250
2.250
2.250
2.375
2.375
2.437
2.437
2.437
2.497
2.500
2.500
2.500
2.625
2.625
2.686
2.750
2.750
2.750
2.756
2.756
2.783
2.783
2.375
2.437
2.500
2.625
2.625
2.686
2.750
2.750
2.756

0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.437
0.500
0.375
0.437
0.375
0.437
0.500
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.437
0.500
0.375
0.437
0.375
0.437
0.375
0.437
0.375
0.375
0.500
0.500
0.375
0.500
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-0757
21158-0760
21158-0761
21158-0762
21158-0763
21158-0764
21158-0765
21158-0766
21158-0767
21158-0768
21158-0769
21158-0771
21158-0772
21158-0773
21158-0774
21158-0775
21158-0777
21158-0778
21158-0780
21158-0781
21158-0782
21158-0784
21158-0787
21158-0788
21158-0789
21158-0790
21158-0799
21158-0804
21158-0805
21158-0807
21158-0808
21158-0810
21158-0817
21158-0820
21158-0826
21158-0827
21158-0828
21158-0829
21158-0830
21158-0832
21158-0835
21158-0836
21158-0837
21158-0838
21158-0840
21158-0841
21158-0842
21158-0843
21158-0844
21158-0845
21158-0846
21158-0847

1.594
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687

2.875
2.375
2.375
2.375
2.437
2.437
2.437
2.497
2.497
2.497
2.500
2.500
2.625
2.625
2.625
2.686
2.686
2.750
2.750
2.756
2.756
2.783
2.875
2.875
2.875
2.375
2.500
2.625
2.686
2.686
2.750
2.750
2.875
2.997
2.375
2.375
2.375
2.437
2.437
2.497
2.500
2.500
2.500
2.625
2.625
2.686
2.686
2.686
2.750
2.750
2.750
2.756

0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-79

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-0848
21158-0849
21158-0853
21158-0854
21158-0855
21158-0859
21158-0861
21158-0862
21158-0865
21158-0867
21158-0868
21158-0870
21158-0871
21158-0874
21158-0877
21158-0878
21158-0883
21158-0886
21158-0887
21158-0888
21158-0892
21158-0894
21158-0898
21158-0899
21158-0900
21158-0901
21158-0902
21158-0903
21158-0904
21158-0905
21158-0906
21158-0907
21158-0908
21158-0909
21158-0910
21158-0911
21158-0912
21158-0913
21158-0914
21158-0915
21158-0916
21158-0918
21158-0919
21158-0921
21158-0922
21158-0923
21158-0924
21158-0925
21158-0927
21158-0928
21158-0930
21158-0931

1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750

2.756
2.756
2.875
2.875
2.875
3.000
3.000
2.437
2.497
2.497
2.500
2.500
2.625
2.686
2.750
2.750
2.783
2.875
2.875
2.875
3.000
3.000
2.437
2.437
2.437
2.497
2.497
2.497
2.500
2.500
2.500
2.625
2.625
2.625
2.686
2.686
2.686
2.750
2.750
2.750
2.756
2.756
2.783
2.783
2.875
2.875
2.875
2.997
2.997
3.000
3.000
3.062

0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21158-0933
21158-0934
21158-0937
21158-0940
21158-0945
21158-0946
21158-0951
21158-0955
21158-0964
21158-0967
21158-0969
21158-0970
21158-0972
21158-0973
21158-0974
21158-0975
21158-0976
21158-0978
21158-0979
21158-0982
21158-0984
21158-0987
21158-0988
21158-0991
21158-0997
21158-1003
21158-1005
21158-1006
21158-1009
21158-1012
21158-1015
21158-1021
21158-1023
21158-1042
21158-1043
21158-1044
21158-1045
21158-1047
21158-1048
21158-1050
21158-1051
21158-1052
21158-1053
21158-1054
21158-1057
21158-1058
21158-1059
21158-1060
21158-1062
21158-1063
21158-1065
21158-1066

1.750
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.844
1.844
1.844
1.844
1.844
1.844
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875

3.062
2.497
2.500
2.625
2.686
2.750
2.756
2.875
3.062
3.125
3.125
2.497
2.497
2.500
2.500
2.500
2.625
2.625
2.686
2.750
2.750
2.756
2.783
2.875
3.000
3.125
3.125
2.625
2.686
2.750
2.756
2.875
2.875
2.625
2.625
2.625
2.686
2.686
2.750
2.750
2.756
2.756
2.756
2.783
2.875
2.875
2.875
2.997
2.997
3.000
3.000
3.062

0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.500
0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-80

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-1069
21158-1071
21158-1075
21158-1076
21158-1078
21158-1084
21158-1093
21158-1094
21158-1105
21158-1114
21158-1116
21158-1117
21158-1119
21158-1120
21158-1122
21158-1123
21158-1128
21158-1129
21158-1130
21158-1131
21158-1132
21158-1134
21158-1135
21158-1136
21158-1137
21158-1138
21158-1139
21158-1140
21158-1141
21158-1142
21158-1143
21158-1144
21158-1147
21158-1148
21158-1149
21158-1150
21158-1153
21158-1154
21158-1156
21158-1162
21158-1164
21158-1166
21158-1167
21158-1168
21158-1170
21158-1174
21158-1177
21158-1180
21158-1183
21158-1185
21158-1186
21158-1187

1.875
1.875
1.875
1.875
1.906
1.906
1.906
1.906
1.906
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
2.000
2.000

3.125
3.125
3.189
3.189
2.625
2.750
2.875
2.875
3.125
2.625
2.625
2.686
2.686
2.750
2.750
2.756
2.783
2.875
2.875
2.875
2.997
2.997
3.000
3.000
3.000
3.062
3.062
3.062
3.125
3.125
3.125
3.147
3.189
3.189
3.189
2.686
2.750
2.750
2.756
2.875
2.875
2.997
2.997
3.000
3.000
3.125
3.147
3.189
3.246
3.246
2.686
2.686

0.375
0.500
0.375
0.437
0.375
0.375
0.375
0.437
0.375
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.437
0.500
0.375
0.375
0.437
0.375
0.375
0.500
0.437
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.437

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-1188
21158-1189
21158-1190
21158-1191
21158-1192
21158-1193
21158-1194
21158-1195
21158-1196
21158-1197
21158-1198
21158-1199
21158-1200
21158-1201
21158-1203
21158-1204
21158-1205
21158-1206
21158-1207
21158-1209
21158-1210
21158-1211
21158-1212
21158-1213
21158-1215
21158-1216
21158-1217
21158-1218
21158-1219
21158-1221
21158-1225
21158-1228
21158-1231
21158-1234
21158-1240
21158-1249
21158-1252
21158-1253
21158-1254
21158-1255
21158-1258
21158-1260
21158-1261
21158-1263
21158-1264
21158-1266
21158-1267
21158-1270
21158-1276
21158-1278
21158-1279
21158-1282

2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.031
2.031
2.031
2.031
2.031
2.031
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.094

2.686
2.750
2.750
2.750
2.756
2.756
2.756
2.783
2.783
2.716
2.875
2.875
2.875
2.997
2.997
3.000
3.000
3.000
3.062
3.062
3.125
2.745
3.125
3.147
3.147
3.189
3.189
3.189
3.246
3.246
2.997
3.000
3.062
3.125
3.189
3.350
2.875
2.875
2.875
2.997
3.000
3.000
3.062
3.062
3.125
3.125
3.147
3.189
3.250
3.250
3.350
2.875

0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-81

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-1285
21158-1291
21158-1297
21158-1306
21158-1309
21158-1313
21158-1315
21158-1318
21158-1321
21158-1322
21158-1323
21158-1324
21158-1326
21158-1327
21158-1328
21158-1329
21158-1330
21158-1331
21158-1332
21158-1333
21158-1334
21158-1335
21158-1336
21158-1339
21158-1341
21158-1342
21158-1345
21158-1346
21158-1347
21158-1348
21158-1349
21158-1350
21158-1351
21158-1352
21158-1353
21158-1357
21158-1359
21158-1360
21158-1363
21158-1365
21158-1366
21158-1375
21158-1378
21158-1384
21158-1385
21158-1389
21158-1390
21158-1396
21158-1398
21158-1399
21158-1400
21158-1401

2.094
2.094
2.094
2.094
2.094
2.094
2.094
2.094
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.187
2.187
2.187

2.997
3.062
3.147
3.250
3.350
3.372
3.481
3.500
2.875
2.875
2.875
2.997
2.997
3.000
3.000
3.000
3.062
3.062
3.062
3.125
3.125
3.125
3.147
3.189
3.189
3.372
3.250
3.250
3.250
3.350
3.350
3.350
3.372
3.372
3.372
3.500
3.500
2.875
2.997
2.997
3.000
3.147
3.189
3.250
3.250
3.350
3.372
3.500
3.500
2.875
2.875
2.875

0.375
0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.500
0.469
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.437
0.500

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21158-1402
21158-1403
21158-1404
21158-1405
21158-1406
21158-1407
21158-1408
21158-1410
21158-1411
21158-1413
21158-1414
21158-1415
21158-1416
21158-1417
21158-1420
21158-1422
21158-1423
21158-1424
21158-1425
21158-1426
21158-1428
21158-1429
21158-1432
21158-1434
21158-1435
21158-1438
21158-1456
21158-1462
21158-1468
21158-1471
21158-1473
21158-1474
21158-1475
21158-1476
21158-1477
21158-1479
21158-1480
21158-1481
21158-1482
21158-1483
21158-1485
21158-1486
21158-1487
21158-1489
21158-1491
21158-1492
21158-1493
21158-1494
21158-1495
21158-1496
21158-1497
21158-1498

2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.219
2.219
2.219
2.219
2.219
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250

3.000
3.000
3.000
3.062
3.062
3.062
3.125
3.125
3.147
3.147
3.189
3.189
3.189
3.246
3.250
3.250
3.350
3.350
3.350
3.372
3.372
3.481
3.500
3.500
2.997
3.000
3.250
3.372
3.500
2.997
2.997
3.000
3.000
3.000
3.062
3.062
3.125
3.125
3.125
3.147
3.147
3.189
3.189
3.246
3.246
3.250
3.250
3.250
3.350
3.350
3.350
3.372

0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.437
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-82

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-1499
21158-1500
21158-1501
21158-1504
21158-1505
21158-1506
21158-1510
21158-1513
21158-1520
21158-1540
21158-1543
21158-1546
21158-1548
21158-1552
21158-1555
21158-1557
21158-1558
21158-1561
21158-1563
21158-1567
21158-1570
21158-1573
21158-1575
21158-1576
21158-1578
21158-1579
21158-1581
21158-1582
21158-1584
21158-1585
21158-1587
21158-1588
21158-1594
21158-1596
21158-1597
21158-1600
21158-1602
21158-1603
21158-1612
21158-1615
21158-1618
21158-1620
21158-1621
21158-1624
21158-1626
21158-1627
21158-1629
21158-1630
21158-1633
21158-1636
21158-1638
21158-1639

2.250
2.250
2.250
2.250
2.250
2.250
2.281
2.281
2.281
2.281
2.281
2.281
2.281
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.375

3.372
3.372
3.481
3.500
3.500
3.500
3.000
3.062
3.147
3.500
3.543
3.623
3.623
2.997
3.000
3.000
3.062
3.125
3.125
3.189
3.246
3.250
3.250
3.350
3.350
3.372
3.372
3.481
3.481
3.500
3.500
3.543
3.751
3.751
3.062
3.125
3.125
3.147
3.250
3.350
3.372
3.372
3.481
3.500
3.500
3.543
3.543
3.623
3.751
3.876
3.876
3.062

0.437
0.500
0.375
0.375
0.437
0.500
0.375
0.375
0.437
0.375
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-1641
21158-1642
21158-1644
21158-1645
21158-1647
21158-1648
21158-1650
21158-1651
21158-1653
21158-1654
21158-1655
21158-1656
21158-1657
21158-1658
21158-1659
21158-1660
21158-1661
21158-1662
21158-1663
21158-1666
21158-1668
21158-1669
21158-1671
21158-1672
21158-1673
21158-1675
21158-1677
21158-1678
21158-1680
21158-1681
21158-1693
21158-1696
21158-1708
21158-1711
21158-1714
21158-1720
21158-1723
21158-1725
21158-1726
21158-1729
21158-1732
21158-1735
21158-1737
21158-1738
21158-1740
21158-1741
21158-1742
21158-1743
21158-1744
21158-1745
21158-1746
21158-1747

2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437

3.062
3.125
3.125
3.147
3.147
3.189
3.189
3.246
3.246
3.250
3.250
3.250
3.350
3.350
3.350
3.372
3.372
3.372
3.481
3.500
3.500
3.543
3.543
3.623
3.623
3.751
3.751
3.876
3.876
3.125
3.250
3.350
3.543
3.623
3.751
4.003
3.125
3.125
3.147
3.189
3.246
3.250
3.250
3.350
3.350
3.372
3.372
3.372
3.481
3.481
3.481
3.500

0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.437
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-83

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-1749
21158-1750
21158-1751
21158-1752
21158-1753
21158-1756
21158-1758
21158-1759
21158-1762
21158-1764
21158-1765
21158-1771
21158-1774
21158-1775
21158-1783
21158-1786
21158-1801
21158-1802
21158-1803
21158-1804
21158-1805
21158-1806
21158-1807
21158-1808
21158-1809
21158-1810
21158-1811
21158-1812
21158-1813
21158-1815
21158-1816
21158-1817
21158-1818
21158-1819
21158-1820
21158-1821
21158-1822
21158-1823
21158-1824
21158-1825
21158-1826
21158-1827
21158-1828
21158-1829
21158-1830
21158-1831
21158-1834
21158-1836
21158-1837
21158-1840
21158-1841
21158-1846

2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.469
2.469
2.469
2.469
2.469
2.469
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.531
2.531
2.531
2.531

3.500
3.543
3.543
3.543
3.623
3.751
3.751
3.876
4.003
4.003
3.189
3.250
3.350
3.350
3.500
3.543
3.189
3.189
3.189
3.246
3.246
3.246
3.250
3.250
3.250
3.350
3.350
3.350
3.372
3.372
3.481
3.481
3.481
3.500
3.500
3.500
3.543
3.543
3.543
3.623
3.623
3.623
3.751
3.751
3.751
3.876
4.003
4.003
3.246
3.250
3.250
3.372

0.500
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.469
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.375
0.437
0.375

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21158-1849
21158-1852
21158-1855
21158-1857
21158-1858
21158-1861
21158-1863
21158-1864
21158-1867
21158-1870
21158-1873
21158-1879
21158-1882
21158-1885
21158-1886
21158-1887
21158-1888
21158-1890
21158-1891
21158-1892
21158-1893
21158-1894
21158-1896
21158-1897
21158-1899
21158-1900
21158-1902
21158-1930
21158-1932
21158-1933
21158-1935
21158-1936
21158-1939
21158-1941
21158-1942
21158-1944
21158-1945
21158-1946
21158-1947
21158-1948
21158-1950
21158-1951
21158-1952
21158-1954
21158-1955
21158-1956
21158-1969
21158-1972
21158-1975
21158-1981
21158-1987
21158-1990

2.531
2.531
2.531
2.531
2.531
2.560
2.531
2.531
2.531
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.656
2.656
2.656
2.656
2.687
2.687

3.481
3.500
3.543
3.543
3.623
3.544
3.751
3.876
4.003
3.246
3.250
3.372
3.481
3.500
3.500
3.500
3.543
3.543
3.623
3.623
3.623
3.751
3.751
3.876
3.876
4.003
4.003
3.350
3.350
3.372
3.372
3.481
3.500
3.500
3.543
3.543
3.623
3.623
3.623
3.751
3.751
3.876
3.876
4.003
4.003
4.003
3.543
3.623
3.751
4.003
3.372
3.481

0.375
0.375
0.375
0.500
0.375
0.315
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.375
0.437
0.500
0.375
0.375
0.375
0.375
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-84

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-1993
21158-1994
21158-1996
21158-1999
21158-2001
21158-2002
21158-2003
21158-2004
21158-2005
21158-2006
21158-2007
21158-2008
21158-2010
21158-2011
21158-2014
21158-2017
21158-2020
21158-2023
21158-2025
21158-2028
21158-2029
21158-2031
21158-2032
21158-2034
21158-2035
21158-2036
21158-2037
21158-2038
21158-2039
21158-2040
21158-2041
21158-2042
21158-2043
21158-2044
21158-2045
21158-2046
21158-2047
21158-2048
21158-2049
21158-2050
21158-2052
21158-2077
21158-2080
21158-2083
21158-2085
21158-2086
21158-2088
21158-2089
21158-2090
21158-2091
21158-2092
21158-2093

2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812

3.500
3.500
3.543
3.623
3.623
3.751
3.751
3.751
3.876
3.876
3.876
4.003
4.003
3.481
3.500
3.543
3.623
3.751
3.751
3.876
4.003
4.003
3.481
3.481
3.500
3.500
3.500
3.543
3.543
3.543
3.623
3.623
3.623
3.751
3.751
3.751
3.876
3.876
3.876
4.003
4.003
3.500
3.543
3.623
3.623
3.751
3.751
3.876
3.876
3.876
4.003
4.003

0.375
0.437
0.375
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-2094
21158-2098
21158-2100
21158-2101
21158-2103
21158-2107
21158-2115
21158-2116
21158-2117
21158-2118
21158-2120
21158-2121
21158-2122
21158-2123
21158-2124
21158-2125
21158-2126
21158-2127
21158-2128
21158-2129
21158-2133
21158-2135
21158-2138
21158-2141
21158-2142
21158-2143
21158-2145
21158-2146
21158-2147
21158-2148
21158-2149
21158-2150
21158-2151
21158-2152
21158-2153
21158-2154
21158-2155
21158-2157
21158-2160
21158-2163
21158-2166
21158-2168
21158-2169
21158-2170
21158-2171
21158-2172
21158-2173
21158-2174
21158-2175
21158-2176
21158-3863
21158-3864

2.812
2.844
2.844
2.844
2.844
2.844
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.906
2.906
2.906
2.906
2.906
2.906
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.969
2.969
2.969
2.969
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
0.250
0.250

4.003
3.623
3.623
3.751
3.751
4.003
3.623
3.623
3.623
3.751
3.751
3.876
3.876
3.876
4.003
4.003
4.003
4.125
4.125
3.623
3.751
3.876
4.003
4.125
4.125
3.623
3.623
3.751
3.751
3.751
3.876
3.876
3.876
4.003
4.003
4.003
4.125
3.751
3.876
4.003
4.125
3.751
3.751
3.751
3.876
3.876
3.876
4.003
4.003
4.003
0.750
0.875

0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.437
0.500
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.406
0.469
0.375
0.437
0.375
0.375
0.406
0.469
0.375
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.437
0.500
0.406
0.375
0.375
0.375
0.406
0.375
0.438
0.500
0.375
0.438
0.500
0.375
0.438
0.500
0.250
0.250

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-85

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-3865
21158-3867
21158-3869
21158-3870
21158-3871
21158-3872
21158-3873
21158-3874
21158-3875
21158-3876
21158-3877
21158-3879
21158-3880
21158-3881
21158-3883
21158-3884
21158-3885
21158-3887
21158-3888
21158-3889
21158-3892
21158-3893
21158-3896
21158-3897
21158-3900
21158-3902
21158-3903
21158-3904
21158-4584
21158-4597
21158-4600
21158-4605
21158-4645
21158-4646
21158-4680
21158-4687
21158-4748
21158-4793
21158-4802
21158-4813
21158-4821
21158-4845
21158-4849
21158-4930
21158-4935
21158-4965
21158-4975
21158-5046
21158-5080
21158-5238
21158-5295
21158-5393

0.438
0.469
0.562
0.750
1.062
1.125
1.125
1.125
1.156
1.187
1.187
1.312
1.500
1.500
1.562
1.625
1.750
1.844
1.875
1.937
2.000
2.031
2.031
2.062
2.125
2.125
2.187
2.187
1.375
1.187
1.187
0.750
1.562
2.375
0.625
0.984
0.875
0.656
0.969
1.125
1.312
2.500
0.875
1.937
0.750
0.781
2.062
0.937
2.500
0.687
1.000
1.625

1.375
1.375
1.000
1.260
1.984
1.984
1.984
1.984
2.441
1.828
2.048
2.875
2.441
2.882
2.875
2.656
3.189
2.500
3.149
3.350
3.375
2.783
3.150
2.783
2.882
3.623
2.882
2.997
2.835
2.835
2.441
1.375
2.561
3.350
1.260
2.048
1.851
1.378
1.850
1.850
2.047
3.937
2.047
2.835
1.850
1.378
3.347
2.047
3.671
1.375
1.983
2.437

0.312
0.312
0.312
0.406
0.500
0.375
0.437
0.500
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.500
0.500
0.375
0.344
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.406
0.500
0.469
0.312
0.375
0.375
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.312
0.312
0.375
0.375
0.375
0.406
0.500
0.469

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

PART NO

SHAFT

BORE

WIDTH

21158-5396
21158-5398
21158-5407
21158-5434
21158-5491
21158-5496
21158-5501
21158-5502
21158-5560
21158-5562
21158-5581
21158-5656
21158-5688
21158-5704
21158-5713
21158-5891
21158-5937
21158-5963
21158-6011
21158-6120
21158-6300
21158-6470
21158-6623
21158-6627
21158-6643
21158-6654
21158-6655
21158-6656
21158-6658
21158-6659
21158-6724
21158-6725
21158-6859
21158-6906
21158-7126
21158-7143
21158-7164
21158-7173
21158-7198
21158-7218
21158-7316
21158-7345
21158-7386
21158-7415
21158-7456
21158-7459
21158-7596
21158-7599
21158-7650
21158-7667
21158-7702
21158-7715

0.562
2.625
2.625
0.906
1.156
1.469
1.500
0.875
2.250
1.108
2.625
1.187
2.125
1.250
1.500
1.125
0.969
1.719
1.187
0.750
2.562
1.000
0.469
2.863
0.562
1.000
1.375
1.969
1.375
1.187
1.750
1.750
0.984
1.000
1.687
2.812
1.875
1.093
0.781
2.156
1.266
0.500
1.375
1.969
1.687
1.750
2.937
1.093
1.125
2.156
2.232
1.281

1.375
3.350
3.375
1.625
1.828
2.437
2.875
1.375
3.350
1.850
3.623
1.984
2.875
1.875
2.125
1.851
2.048
2.835
2.500
1.851
3.937
1.750
1.260
4.724
1.260
2.047
2.047
2.835
2.441
1.850
3.125
2.835
1.850
1.851
2.835
3.875
2.835
1.850
1.850
3.544
2.048
1.182
2.000
3.150
2.441
2.718
3.937
1.654
1.850
2.835
3.543
2.047

0.406
0.469
0.375
0.437
0.437
0.469
0.406
0.406
0.469
0.375
0.469
0.500
0.469
0.375
0.437
0.437
0.375
0.375
0.500
0.375
0.375
0.500
0.312
0.500
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.469
0.375
0.375
0.375
0.375
0.375
0.312
0.375
0.375
0.375
0.359
0.375
0.312
0.312
0.375
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-86

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-7727
21158-7748
21158-7753
21158-7761
21158-7763
21158-7767
21158-7800
21158-7846
21158-7852
21158-7865
21158-7884
21158-7914
21158-7926
21158-7927
21158-7928
21158-7929
21158-7931
21158-7932
21158-7933
21158-7934
21158-7936
21158-7937
21158-7938
21158-7939
21158-7940
21158-7941
21158-8007
21158-8008
21158-8009
21158-8010
21158-8011
21158-8012
21158-8013
21158-8015
21158-8016
21158-8018
21158-8020
21158-8021
21158-8023
21158-8025
21158-8026
21158-8028
21158-8029
21158-8032
21158-8033
21158-8035
21158-8036
21158-8038
21158-8039
21158-8041
21158-8042
21158-8044

0.188
1.417
0.719
1.781
0.719
1.625
2.625
0.781
1.250
1.732
1.575
1.156
2.406
2.437
2.469
2.531
2.656
2.687
2.719
2.750
2.812
2.844
2.875
2.906
2.969
3.000
0.375
0.375
0.406
0.406
0.438
0.469
0.500
0.531
0.531
0.562
0.594
0.594
0.625
0.656
0.656
0.687
0.687
0.719
0.750
0.750
0.781
0.781
0.812
0.812
0.812
0.844

0.750
2.047
1.260
2.441
1.378
2.441
3.937
1.851
2.047
2.835
2.441
2.047
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
1.260
1.182
1.182
1.260
1.260
1.182
1.260
1.182
1.260
1.182
1.182
1.260
1.182
1.182
1.260
1.182
1.260
1.654
1.260
1.654
1.260
1.654
1.260
1.654
1.850
1.654

0.250
0.374
0.312
0.375
0.312
0.375
0.375
0.312
0.375
0.375
0.394
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.312

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

21158-8045
21158-8046
21158-8048
21158-8050
21158-8051
21158-8052
21158-8054
21158-8055
21158-8056
21158-8057
21158-8059
21158-8060
21158-8061
21158-8062
21158-8063
21158-8064
21158-8065
21158-8066
21158-8067
21158-8068
21158-8070
21158-8071
21158-8072
21158-8073
21158-8075
21158-8076
21158-8077
21158-8078
21158-8079
21158-8080
21158-8081
21158-8082
21158-8083
21158-8084
21158-8085
21158-8086
21158-8088
21158-8089
21158-8090
21158-8091
21158-8092
21158-8093
21158-8094
21158-8097
21158-8098
21158-8099
21158-8100
21158-8101
21158-8102
21158-8109
21158-8110
21158-8111

0.844
0.844
0.875
0.906
0.906
0.906
0.937
0.937
0.969
1.000
1.031
1.031
1.031
1.062
1.062
1.062
1.093
1.125
1.125
1.219
1.281
1.312
1.344
1.406
1.469
1.531
1.562
1.562
1.594
1.594
1.625
1.656
1.656
1.719
1.750
1.781
1.812
1.812
1.844
1.844
1.906
1.906
1.937
2.000
2.000
2.031
2.062
0.438
0.500
0.594
0.719
2.000

1.850
2.047
1.654
1.654
1.850
2.047
1.654
1.850
1.654
1.654
1.654
1.850
2.047
1.654
1.850
2.047
2.047
1.654
2.047
2.047
2.441
2.441
2.441
2.441
2.441
2.441
2.441
2.835
2.441
2.835
2.835
2.441
2.835
2.441
3.150
2.835
2.835
3.150
2.835
3.150
2.835
3.150
3.150
3.150
3.347
2.835
2.835
1.182
1.378
1.378
1.850
2.835

0.375
0.312
0.312
0.312
0.375
0.375
0.312
0.375
0.312
0.312
0.312
0.375
0.375
0.312
0.375
0.375
0.375
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.312
0.312
0.312
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-87

Oil Seals by Model Number

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

Garlock

PART NO

SHAFT

BORE

WIDTH

21158-8112
21158-8117
21158-8258
21158-8326
21158-8335
21158-8336
21158-8337
21158-8338
21158-8340
21158-8341
21158-8342
21158-8343
21158-8344
21158-8345
21158-8346
21158-8347
21158-8348
21158-8349
21158-8350
21158-8351
21158-8352
21158-8353
21158-8354
21158-8355
21158-8357
21158-8358
21158-8359
21158-8360
21158-8361
21158-8362
21158-8363
21158-8364
21158-8365
21158-8366
21158-8367
21158-8368
21158-8369
21158-8370
21158-8371
21158-8372
21158-8373
21158-8374
21158-8375
21158-8376
21158-8377
21158-8378
21158-8405
21158-8456
21158-8484
21158-8610
21158-8615
21158-8644

2.125
2.156
1.875
1.562
0.375
0.406
0.438
0.469
0.531
0.562
0.625
0.687
0.750
0.812
0.844
0.875
2.031
2.031
2.062
2.094
2.094
2.125
2.125
2.156
2.187
2.187
2.219
2.219
2.250
2.250
2.281
2.281
2.312
2.312
2.344
2.344
2.375
2.375
2.406
2.406
2.437
2.437
2.469
2.500
2.531
2.562
1.781
1.750
1.718
1.575
1.625
1.062

2.835
3.347
3.000
2.441
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
3.150
3.347
3.150
3.150
3.347
3.150
3.347
3.150
3.150
3.347
3.150
3.347
3.150
3.347
3.150
3.347
3.150
3.347
3.150
3.347
3.150
3.347
3.150
3.347
3.150
3.347
3.347
3.347
3.347
3.347
2.437
3.625
2.561
2.441
2.562
1.979

0.375
0.375
0.562
0.437
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.375

MODEL NO
63
63
63
63
63
63
63
63
63
63
63
63
63
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1

PART NO

SHAFT

BORE

WIDTH

21158-8904
21158-9223
21158-9294
21158-9342
21158-9345
21158-9407
21158-9481
21158-9564
21158-9571
21158-9612
21158-9620
21158-9633
21158-9822
23078-0018
23078-0222
23078-1437
23078-2967
23078-4592
23078-4735
23078-4746
23078-4838
23078-4908
23078-4916
23078-4938
23078-4945
23078-5004
23078-5005
23078-5041
23078-5208
23078-5215
23078-5256
23078-5268
23078-5283
23078-5311
23078-5362
23078-5387
23078-5391
23078-5544
23078-5657
23078-5686
23078-5687
23078-5693
23078-5703
23078-5791
23078-6028
23078-6141
23078-6244
23078-6270
23078-6271
23078-6459
23078-6470
23078-6478

2.281
1.766
1.437
1.181
1.000
2.156
2.937
1.125
2.062
1.375
1.750
1.812
1.750
0.375
0.875
2.219
1.875
2.125
2.250
2.375
2.125
0.687
2.125
2.250
2.062
1.500
1.750
0.687
2.250
1.969
1.750
1.500
2.000
0.625
1.656
2.500
0.500
1.969
0.625
2.625
2.125
2.719
1.000
1.062
1.750
2.187
2.687
2.437
1.562
2.375
1.000
2.250

3.154
2.559
2.441
1.850
1.875
2.882
4.125
1.781
3.500
2.875
2.441
2.758
2.375
1.000
1.750
2.997
3.000
2.875
3.500
3.246
3.350
1.125
2.875
3.372
3.189
2.625
2.750
1.250
2.997
2.875
2.750
2.750
2.750
1.250
2.500
3.500
1.125
2.686
1.125
3.374
3.062
4.003
2.000
1.828
2.625
2.875
3.500
3.372
2.500
3.125
1.750
3.000

0.375
0.375
0.375
0.375
0.312
0.375
0.562
0.437
0.375
0.375
0.375
0.500
0.312
0.375
0.437
0.594
0.594
0.687
0.594
0.594
0.594
0.437
0.594
0.594
0.594
0.594
0.594
0.437
0.594
0.687
0.750
0.594
0.625
0.531
0.594
0.750
0.531
0.594
0.500
0.719
0.750
0.594
0.625
0.453
0.594
0.594
0.594
0.594
0.594
0.594
0.500
0.687

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-88

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1

23078-6506
23078-6523
23078-6524
23078-6585
23078-6592
23078-6593
23078-6605
23078-6612
23078-6680
23078-6700
23078-6701
23078-6744
23078-6755
23078-6762
23078-6794
23078-6795
23078-6866
23078-6904
23078-6927
23078-6961
23078-6985
23078-6986
23078-6993
23078-7099
23078-7116
23078-7122
23078-7142
23078-7145
23078-7152
23078-7186
23078-7201
23078-7254
23078-7285
23078-7307
23078-7328
23078-7339
23078-7341
23078-7372
23078-7390
23078-7406
23078-7484
23078-7542
23078-7555
23078-7563
23078-7567
23078-7568
23078-7633
23078-7662
23078-7722
23078-7776
23078-7787
23078-7829

2.500
0.875
1.000
2.937
1.812
2.125
2.125
0.750
2.875
2.562
1.375
1.687
1.000
2.875
2.125
2.250
2.625
2.000
0.750
1.437
0.750
0.500
1.187
2.000
1.562
0.438
2.250
2.062
1.625
1.000
0.562
1.687
2.437
1.750
3.000
2.750
1.187
1.250
1.250
2.375
2.125
3.000
1.750
2.000
1.375
1.500
2.437
0.625
2.937
2.625
2.125
2.750

3.250
1.375
1.625
4.003
2.875
3.000
3.250
1.250
4.003
3.500
2.250
3.000
1.500
4.125
3.061
2.997
3.350
3.000
1.375
2.437
1.500
1.125
2.000
2.875
2.250
0.875
3.147
3.000
2.437
2.000
1.250
2.500
3.500
2.500
4.003
3.751
1.875
2.375
2.000
3.500
3.125
3.751
3.000
2.750
2.125
2.250
3.125
1.250
4.125
3.623
3.189
3.500

0.594
0.437
0.437
0.594
0.594
0.687
0.594
0.437
0.594
0.594
0.594
0.594
0.437
0.719
0.687
0.687
0.594
0.594
0.437
0.594
0.437
0.562
0.594
0.594
0.594
0.437
0.594
0.594
0.594
0.687
0.562
0.594
0.594
0.594
0.594
0.750
0.594
0.594
0.594
0.750
0.594
0.594
0.594
0.687
0.594
0.594
0.594
0.437
0.719
0.594
0.750
0.594

MODEL NO
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63F1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1

PART NO

SHAFT

BORE

WIDTH

23078-8105
23078-8312
23078-8318
23078-8432
23078-8498
23078-8573
23078-8650
23078-8679
23078-8763
23078-9070
23078-9093
23078-9234
23078-9666
23078-9667
23078-9694
23078-9739
23078-9833
23078-9943
23547-4592
23547-4700
23547-4754
23547-4766
23547-4819
23547-4891
23547-4905
23547-4914
23547-5387
23547-5476
23547-5483
23547-5528
23547-5568
23547-5702
23547-5893
23547-6043
23547-6438
23547-6442
23547-6465
23547-6467
23547-6469
23547-6476
23547-6477
23547-6479
23547-6522
23547-6551
23547-6576
23547-6588
23547-6667
23547-6674
23547-6675
23547-6730
23547-6745
23547-6751

2.469
1.250
0.594
1.469
2.250
2.500
1.875
2.687
0.562
2.812
2.500
1.687
2.000
1.687
2.687
1.625
1.375
1.625
2.125
0.875
0.750
1.625
0.937
1.437
2.250
2.375
2.500
2.062
2.625
2.250
2.000
2.062
0.438
2.312
2.000
0.500
2.500
2.750
1.937
0.875
1.000
1.375
1.750
1.500
1.375
2.937
1.500
1.250
1.250
2.875
1.250
1.687

3.500
1.984
1.125
2.250
2.997
3.543
2.625
3.751
1.125
4.003
3.372
2.437
3.062
2.875
3.876
2.750
2.125
2.441
2.875
1.500
1.375
2.625
1.500
2.686
3.147
3.500
3.500
3.062
3.625
3.500
2.997
3.187
0.875
3.751
3.000
1.000
3.500
3.751
3.000
1.625
1.625
2.125
3.000
2.500
2.062
4.003
2.375
2.125
2.250
3.751
2.000
3.000

0.594
0.594
0.437
0.594
0.750
0.594
0.594
0.594
0.437
0.594
0.594
0.625
0.594
0.594
0.594
0.594
0.625
0.594
0.687
0.562
0.562
0.687
0.562
0.687
0.687
0.687
0.750
0.687
0.687
0.703
0.687
0.703
0.594
0.687
0.687
0.594
0.687
0.687
0.687
0.562
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-89

Oil Seals by Model Number

MODEL NO
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R1
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2

Garlock

PART NO

SHAFT

BORE

WIDTH

23547-6757
23547-6774
23547-6832
23547-6857
23547-6860
23547-6898
23547-6937
23547-6941
23547-6986
23547-7146
23547-7150
23547-7184
23547-7187
23547-7197
23547-7208
23547-7210
23547-7215
23547-7280
23547-7346
23547-7382
23547-7563
23547-7569
23547-7691
23547-8104
23547-8187
23547-8266
23547-8272
23547-8470
23547-8514
23547-8569
23547-8704
23547-9029
23547-9417
23547-9430
23547-9551
23547-9585
23548-1171
23548-4592
23548-4665
23548-4670
23548-4671
23548-4693
23548-4700
23548-4721
23548-4734
23548-4754
23548-4818
23548-4844
23548-4848
23548-4852
23548-4861
23548-4866

2.250
1.375
1.750
1.125
1.625
2.375
1.500
2.344
0.500
0.250
0.625
0.750
2.625
3.000
1.125
2.687
1.000
1.562
2.062
2.250
2.000
1.687
2.250
1.562
1.187
1.625
0.500
2.937
1.156
1.250
1.500
2.406
1.000
1.937
1.281
1.187
2.875
2.125
2.250
2.000
1.750
1.937
0.875
0.937
2.500
0.750
1.469
2.500
2.187
0.562
1.437
2.000

3.500
2.250
2.750
1.750
2.500
3.125
2.250
3.350
1.125
0.750
1.250
1.500
3.500
4.003
1.750
3.751
1.750
2.437
2.875
3.350
2.750
2.375
3.246
2.375
1.875
2.875
1.250
3.876
2.250
2.437
2.250
3.372
1.750
2.997
2.497
2.062
3.876
2.875
3.250
2.875
2.437
2.875
1.500
1.625
3.876
1.375
2.750
3.543
3.500
1.000
2.500
3.246

0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.469
0.562
0.562
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.531
0.687
0.625
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.562
0.687
0.562
0.687
0.687
0.687
0.594
0.687
0.687

MODEL NO
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2

PART NO

SHAFT

BORE

WIDTH

23548-4887
23548-4958
23548-4976
23548-5401
23548-5483
23548-5653
23548-5968
23548-5980
23548-6438
23548-6442
23548-6452
23548-6465
23548-6467
23548-6468
23548-6477
23548-6478
23548-6479
23548-6516
23548-6517
23548-6522
23548-6536
23548-6543
23548-6546
23548-6551
23548-6554
23548-6566
23548-6567
23548-6569
23548-6580
23548-6593
23548-6599
23548-6608
23548-6637
23548-6641
23548-6651
23548-6667
23548-6675
23548-6694
23548-6706
23548-6716
23548-6720
23548-6730
23548-6733
23548-6745
23548-6753
23548-6792
23548-6795
23548-6800
23548-6832
23548-6856
23548-6899
23548-6966

1.000
2.312
1.375
0.875
2.625
0.937
2.375
2.375
2.000
0.500
1.125
2.500
2.750
2.375
1.000
2.250
1.375
1.625
1.250
1.750
2.000
3.000
1.875
1.500
1.687
2.500
0.562
1.437
1.000
2.125
2.875
2.000
0.625
2.562
2.625
1.500
1.250
1.000
2.000
2.750
0.750
2.875
0.375
1.250
1.687
1.937
2.250
2.625
1.750
0.625
1.562
2.500

1.875
3.250
2.625
1.828
3.625
1.875
3.062
3.350
3.000
1.000
1.625
3.500
3.751
3.751
1.625
3.000
2.125
2.375
2.375
3.000
3.375
3.751
2.625
2.500
2.750
3.751
1.125
2.250
1.828
3.000
4.003
2.686
1.125
3.250
3.751
2.375
2.250
1.500
3.189
3.500
1.250
3.751
0.750
2.000
2.686
3.350
2.997
4.003
2.750
1.375
2.500
4.003

0.687
0.687
0.687
0.687
0.687
0.625
0.687
0.687
0.687
0.594
0.562
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.562
0.687
0.687
0.562
0.687
0.469
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.687

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-90

Rev. 1/01

Garlock
MODEL NO
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63R2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2

Oil Seals by Model Number

PART NO

SHAFT

BORE

WIDTH

23548-6971
23548-7100
23548-7136
23548-7146
23548-7159
23548-7160
23548-7177
23548-7187
23548-7197
23548-7215
23548-7223
23548-7228
23548-7238
23548-7248
23548-7299
23548-7333
23548-7563
23548-7564
23548-8104
23548-8187
23548-8293
23548-8339
23548-8404
23548-8496
23548-8521
23548-8643
23548-8646
23548-8863
23548-8930
23548-9040
23548-9081
23548-9604
23548-9621
23548-9624
23550-1452
23550-2494
23550-2577
23550-4592
23550-4648
23550-4659
23550-4665
23550-4670
23550-4671
23550-4672
23550-4693
23550-4754
23550-4781
23550-4818
23550-4819
23550-4844
23550-4866
23550-4958

0.594
0.969
2.437
0.250
2.812
2.125
2.750
2.625
3.000
1.000
1.937
1.750
2.437
1.937
0.687
1.187
2.000
2.500
1.562
1.187
1.875
0.625
2.125
0.375
2.437
1.875
1.719
2.937
2.500
2.687
1.469
2.312
2.062
0.937
1.250
2.406
0.750
2.125
2.969
2.187
2.250
2.000
1.750
1.750
1.937
0.750
0.500
1.469
0.937
2.500
2.000
2.312

1.375
2.062
3.189
0.750
3.751
3.125
4.003
3.500
4.003
1.750
2.625
2.625
3.481
2.686
1.125
2.375
2.750
3.250
2.375
1.875
2.875
1.500
3.350
0.875
3.250
2.750
2.625
3.623
3.625
3.623
2.375
3.000
2.997
1.750
1.875
3.125
1.750
2.875
3.751
2.875
3.250
2.875
2.437
2.500
2.875
1.375
1.375
2.750
1.500
3.543
3.246
3.250

0.562
0.687
0.687
0.469
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.469
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.688
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.562
0.687
0.562
0.687
0.687
0.687

MODEL NO

PART NO

SHAFT

BORE

WIDTH

63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2

23550-4976
23550-5007
23550-5053
23550-5214
23550-5248
23550-5257
23550-5652
23550-5778
23550-5886
23550-5893
23550-5980
23550-6438
23550-6448
23550-6452
23550-6465
23550-6466
23550-6467
23550-6469
23550-6475
23550-6477
23550-6478
23550-6479
23550-6487
23550-6500
23550-6517
23550-6522
23550-6541
23550-6546
23550-6551
23550-6554
23550-6566
23550-6569
23550-6576
23550-6589
23550-6593
23550-6599
23550-6624
23550-6637
23550-6651
23550-6662
23550-6667
23550-6675
23550-6688
23550-6694
23550-6720
23550-6745
23550-6753
23550-6757
23550-6774
23550-6832
23550-6856
23550-6857

1.375
1.375
2.000
0.750
0.750
2.625
1.875
2.000
2.687
0.438
2.375
2.000
1.500
1.125
2.500
1.125
2.750
1.937
1.375
1.000
2.250
1.375
2.437
0.875
1.250
1.750
2.437
1.875
1.500
1.687
2.500
1.437
1.375
2.687
2.125
2.875
1.250
0.625
2.625
0.781
1.500
1.250
1.125
1.000
0.750
1.250
1.687
2.250
1.375
1.750
0.625
1.125

2.625
2.106
3.125
1.575
1.875
3.500
2.686
2.882
3.876
0.875
3.350
3.000
2.625
1.625
3.500
2.000
3.751
3.000
2.500
1.625
3.000
2.125
3.125
1.375
2.375
3.000
3.500
2.625
2.500
2.750
3.751
2.250
2.062
4.003
3.000
4.003
2.062
1.125
3.751
1.500
2.375
2.250
1.875
1.500
1.250
2.000
2.686
3.500
2.250
2.750
1.375
1.750

0.687
0.687
0.687
0.562
0.687
0.750
0.687
0.687
0.687
0.594
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.687
0.562
0.687
0.687
0.687
0.562
0.562
0.687
0.687
0.687
0.687
0.687
0.562
0.687

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-91

Oil Seals by Model Number

MODEL NO
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63T2
63TB
63TB
63TB
63TB
63TB
63TB
63TF
63TF
64
64
64
64

Garlock

PART NO

SHAFT

BORE

WIDTH

23550-6860
23550-6904
23550-6929
23550-6934
23550-6937
23550-6971
23550-6977
23550-6995
23550-7044
23550-7130
23550-7146
23550-7150
23550-7153
23550-7160
23550-7167
23550-7184
23550-7186
23550-7187
23550-7197
23550-7223
23550-7226
23550-7261
23550-7299
23550-7405
23550-7563
23550-7564
23550-7569
23550-7595
23550-7722
23550-8187
23550-8266
23550-8267
23550-8562
23550-8732
23550-9122
23550-9381
23550-9551
23550-9654
23550-9748
23550-9844
23549-6551
23549-6674
23549-6699
23549-7197
23549-8292
23549-9844
23735-4665
23735-6588
21238-0569
21238-0586
21238-1073
21238-1299

1.625
2.000
2.156
1.687
1.500
0.594
0.750
2.250
1.625
1.562
0.250
0.625
3.000
2.125
2.437
0.750
1.000
2.625
3.000
1.937
1.437
1.562
0.687
0.669
2.000
2.500
1.687
1.250
2.937
1.187
1.625
0.562
0.781
1.875
1.437
1.312
1.281
3.000
1.187
2.250
1.500
1.250
2.187
3.000
1.875
2.250
2.250
2.937
21.500
43.504
39.370
6.125

2.500
3.000
3.372
2.625
2.250
1.375
1.625
3.125
2.437
2.686
0.750
1.250
3.876
3.125
3.751
1.500
2.000
3.500
4.003
2.625
2.437
2.783
1.125
1.575
2.750
3.250
2.375
1.984
4.125
1.875
2.875
1.375
1.250
3.000
2.125
2.106
2.497
3.937
1.828
3.372
2.500
2.125
3.147
4.003
3.189
3.372
3.250
4.003
23.750
45.669
41.338
7.625

0.687
0.594
0.687
0.688
0.687
0.562
0.562
0.687
0.687
0.687
0.469
0.562
0.687
0.687
0.687
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.562
0.687
0.687
0.687
0.687
0.719
0.687
0.687
0.562
0.562
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.875
0.984
0.875
0.687

MODEL NO
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

PART NO

SHAFT

BORE

WIDTH

21238-1451
21238-1692
21238-1705
21238-1914
21238-1915
21238-1929
21238-1964
21238-2394
21238-2576
21238-2622
21238-2736
21238-2812
21238-3135
21238-3145
21238-3669
21238-3699
21238-3700
21238-3701
21238-3702
21238-3716
21238-3720
21238-3744
21238-3748
21238-3750
21238-3751
21238-3752
21238-3753
21238-3754
21238-3756
21238-3757
21238-3763
21238-3764
21238-3765
21238-3767
21238-3768
21238-3770
21238-3772
21238-3773
21238-3774
21238-3777
21238-3779
21238-3783
21238-3785
21238-3788
21238-3789
21238-3790
21238-3791
21238-3792
21238-3797
21238-3831
21238-3835
21238-3836

24.803
9.750
8.500
51.250
22.437
16.535
40.500
22.047
22.375
14.875
8.625
8.750
11.000
9.500
10.000
11.125
11.125
12.000
12.000
12.625
11.000
16.750
16.750
17.000
17.250
18.000
18.000
18.120
18.125
18.250
22.000
22.250
18.250
18.375
18.500
24.250
18.500
19.000
25.000
19.250
19.500
19.500
19.750
19.875
19.938
20.000
29.500
20.143
30.000
34.750
35.000
35.000

26.378
11.125
9.750
53.300
24.437
18.504
43.020
24.016
24.375
16.875
10.260
10.875
12.250
10.750
12.250
13.000
13.250
13.750
14.750
14.500
12.250
18.250
19.000
19.500
18.750
20.500
21.000
20.500
20.500
19.750
24.250
24.250
19.875
20.500
20.000
26.250
20.250
21.500
27.000
21.000
21.000
21.688
22.250
22.000
21.500
22.500
31.500
22.250
32.500
36.750
37.000
37.500

0.750
0.562
0.562
0.875
0.875
0.875
0.875
0.875
0.875
0.937
0.687
0.812
0.562
0.562
0.813
0.687
0.813
0.688
0.813
0.687
0.687
0.687
0.812
0.812
0.687
0.875
0.875
0.875
0.875
0.687
0.875
0.875
0.687
0.750
0.687
1.000
0.687
0.875
0.875
0.750
0.750
0.875
0.875
0.875
0.750
0.875
1.000
0.875
1.000
0.875
0.875
0.875

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-92

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

21238-3837
21238-3847
21238-3855
21238-3856
21238-3857
21238-3858
21238-3859
21238-3860
21238-3861
21238-3862
21238-3878
21238-3921
21238-3933
21238-3938
21238-3939
21238-3946
21238-3952
21238-3953
21238-3954
21238-3955
21238-3957
21238-3962
21238-3963
21238-3981
21238-3984
21238-3985
21238-3992
21238-3994
21238-3997
21238-3998
21238-3999
21238-4004
21238-4009
21238-4011
21238-4015
21238-4017
21238-4022
21238-4023
21238-4026
21238-4027
21238-4028
21238-4031
21238-4036
21238-4039
21238-4047
21238-4052
21238-4055
21238-4056
21238-4057
21238-4063
21238-4064
21238-4071

35.000
37.437
14.250
14.625
14.625
14.875
14.875
14.875
14.906
15.000
28.000
8.000
8.375
8.500
8.625
8.750
8.750
8.875
9.000
9.000
9.125
9.125
9.250
9.500
9.500
9.750
10.000
10.000
10.000
10.000
10.125
10.250
10.250
10.500
10.250
10.500
10.750
10.750
10.750
10.875
10.875
10.750
11.000
11.024
11.250
11.375
12.250
12.375
11.500
11.500
11.750
12.000

38.000
39.500
16.500
16.250
16.750
16.500
16.750
17.000
17.000
17.750
30.500
9.500
9.875
10.500
10.125
10.250
10.750
10.875
10.500
11.000
10.625
11.125
10.750
11.250
11.500
11.250
11.500
11.750
12.000
12.000
11.625
11.750
12.250
12.000
12.500
12.500
13.000
12.250
13.250
12.375
12.500
12.750
13.000
13.386
13.250
13.375
14.000
14.000
13.000
13.500
13.250
14.000

WIDTH
0.875
0.875
0.812
0.687
0.812
0.687
0.687
0.812
0.812
0.812
0.875
0.687
0.687
0.812
0.687
0.687
0.812
0.812
0.687
0.812
0.687
0.812
0.687
0.750
0.812
0.687
0.687
0.750
0.812
0.875
0.687
0.687
0.812
0.687
0.813
0.812
0.813
0.687
0.813
0.687
0.687
0.812
0.812
0.813
0.812
0.812
0.687
0.687
0.687
0.812
0.687
0.750

MODEL NO

PART NO

SHAFT

BORE

64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

21238-4072
21238-4075
21238-4076
21238-4079
21238-4081
21238-4082
21238-4083
21238-4084
21238-4089
21238-4092
21238-4093
21238-4096
21238-4097
21238-4099
21238-4101
21238-4105
21238-4106
21238-4108
21238-4110
21238-4111
21238-4112
21238-4118
21238-4119
21238-4121
21238-4123
21238-4124
21238-4128
21238-4129
21238-4130
21238-4131
21238-4134
21238-4135
21238-4140
21238-4142
21238-4145
21238-4147
21238-4151
21238-4156
21238-4158
21238-4159
21238-4163
21238-4166
21238-4167
21238-4168
21238-4169
21238-4170
21238-4171
21238-4172
21238-4173
21238-4174
21238-4175
21238-4176

12.000
12.250
12.375
12.500
12.625
12.500
12.500
12.500
12.750
12.750
13.000
13.000
12.375
13.000
13.250
13.250
12.375
13.813
13.875
13.938
13.938
14.250
13.750
13.500
13.500
13.500
13.500
13.750
13.937
14.000
14.000
14.000
14.250
14.500
14.500
14.750
15.000
15.000
15.312
15.375
15.500
15.359
15.375
15.500
15.748
15.750
15.750
15.750
16.000
16.250
15.750
15.875

14.000
14.250
13.875
14.000
14.125
14.500
14.500
15.000
14.250
15.000
14.500
14.875
14.375
15.000
14.750
15.125
14.500
16.000
16.000
15.500
16.000
15.750
16.000
15.000
15.750
15.250
15.500
15.750
15.437
15.500
15.750
16.000
16.250
16.000
16.500
16.250
16.500
17.000
16.875
17.375
17.500
17.717
17.250
18.000
17.716
17.250
17.500
18.000
17.625
18.500
18.500
17.875

WIDTH
0.812
0.812
0.687
0.687
0.687
0.750
0.812
0.813
0.687
0.813
0.687
0.687
0.687
0.812
0.687
0.687
0.813
0.812
0.812
0.687
0.687
0.687
0.813
0.687
0.813
0.750
0.812
0.812
0.687
0.687
0.750
0.812
0.812
0.687
0.812
0.687
0.687
0.812
0.687
0.812
0.812
0.687
0.687
0.812
0.687
0.687
0.687
0.812
0.687
0.812
1.000
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-93

Oil Seals by Model Number

MODEL NO
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

Garlock

PART NO

SHAFT

BORE

WIDTH

21238-4177
21238-4179
21238-4180
21238-4181
21238-4183
21238-4184
21238-4186
21238-4188
21238-4190
21238-4191
21238-4194
21238-4197
21238-4198
21238-4199
21238-4200
21238-4203
21238-4204
21238-4206
21238-4209
21238-4210
21238-4213
21238-4215
21238-4216
21238-4218
21238-4219
21238-4221
21238-4228
21238-4233
21238-4235
21238-4236
21238-4237
21238-4239
21238-4240
21238-4241
21238-4242
21238-4243
21238-4244
21238-4245
21238-4246
21238-4248
21238-4250
21238-4251
21238-4253
21238-4254
21238-4257
21238-4259
21238-4260
21238-4261
21238-4262
21238-4263
21238-4265
21238-4268

16.000
16.375
16.000
16.250
16.500
16.250
16.500
17.000
17.000
17.000
17.500
17.500
17.500
17.625
17.750
18.000
17.875
18.000
18.000
18.000
18.375
18.375
18.500
19.000
19.000
19.500
19.750
19.937
20.000
20.000
20.000
20.250
20.250
20.250
20.438
20.750
20.866
20.500
20.500
20.750
20.875
21.000
21.000
21.250
21.500
21.500
21.750
21.625
21.750
21.625
21.750
22.375

17.500
17.875
18.000
17.750
19.000
18.000
18.500
18.500
19.000
19.250
19.000
19.750
19.500
19.250
19.750
19.875
19.875
19.500
20.000
20.000
19.875
20.000
20.500
20.500
21.000
21.500
21.750
21.687
21.500
21.750
22.000
21.750
22.250
22.375
22.500
23.000
22.836
22.250
22.500
22.750
22.875
23.250
23.000
23.250
23.250
23.500
24.500
23.375
24.750
23.625
23.750
24.250

0.687
0.687
0.812
0.687
0.812
0.750
0.812
0.687
0.812
0.812
0.687
0.812
0.687
0.687
0.812
0.687
0.812
0.687
0.750
0.875
0.687
0.750
0.875
0.750
0.875
0.875
0.875
0.625
0.750
0.750
0.875
0.750
0.875
0.750
0.812
0.812
0.812
0.812
0.875
0.875
0.875
0.812
0.875
0.875
0.750
0.875
0.875
0.750
0.875
0.875
0.875
0.750

MODEL NO
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

PART NO

SHAFT

BORE

WIDTH

21238-4269
21238-4270
21238-4271
21238-4272
21238-4273
21238-4274
21238-4275
21238-4276
21238-4277
21238-4279
21238-4281
21238-4283
21238-4284
21238-4285
21238-4287
21238-4288
21238-4290
21238-4291
21238-4292
21238-4293
21238-4294
21238-4297
21238-4299
21238-4300
21238-4301
21238-4302
21238-4303
21238-4304
21238-4305
21238-4306
21238-4307
21238-4308
21238-4309
21238-4311
21238-4312
21238-4313
21238-4315
21238-4316
21238-4318
21238-4320
21238-4322
21238-4323
21238-4325
21238-4326
21238-4327
21238-4328
21238-4330
21238-4333
21238-4335
21238-4338
21238-4339
21238-4340

22.000
22.000
22.500
22.500
22.500
22.500
22.437
22.437
23.000
22.500
22.750
23.000
23.000
23.000
23.375
23.500
23.562
23.562
23.625
23.875
24.000
24.000
25.250
25.500
24.250
24.437
25.875
24.437
24.500
25.988
26.375
25.000
25.000
25.187
26.375
26.500
27.500
28.000
25.500
28.000
29.500
30.000
26.000
33.000
33.500
33.625
26.125
27.000
34.250
34.500
27.500
38.000

23.500
24.000
24.000
24.250
24.750
25.000
24.000
24.250
25.375
24.500
24.750
24.500
25.000
25.500
25.375
25.500
25.250
25.375
26.000
26.000
26.000
26.500
27.250
27.000
26.250
26.000
28.000
26.437
26.500
27.625
28.188
26.500
27.000
26.875
28.250
28.500
29.000
29.813
27.500
30.250
32.250
32.250
28.000
35.250
36.250
35.625
28.125
29.000
36.750
37.500
29.500
41.000

0.750
0.875
0.750
0.750
0.875
0.875
0.750
0.750
0.875
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.750
0.750
0.875
0.875
0.875
0.875
0.750
0.875
0.875
0.750
0.875
0.750
0.875
0.750
0.875
0.750
1.000
0.750
0.875
0.875
0.750
0.750
0.875
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-94

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

21238-4341
21238-4342
21238-4343
21238-4344
21238-4346
21238-4347
21238-4348
21238-4349
21238-4350
21238-4352
21238-4356
21238-4357
21238-4358
21238-4359
21238-4360
21238-4361
21238-4365
21238-4367
21238-4371
21238-4373
21238-4377
21238-4381
21238-4382
21238-4389
21238-4399
21238-4401
21238-4405
21238-4416
21238-4417
21238-4421
21238-4429
21238-4430
21238-4432
21238-4434
21238-4436
21238-4438
21238-4448
21238-4454
21238-4456
21238-4462
21238-4465
21238-4467
21238-4468
21238-4473
21238-4475
21238-4476
21238-4499
21238-4500
21238-4527
21238-4529
21238-4531
21238-4533

27.875
38.358
28.000
28.000
28.500
29.000
29.000
38.500
39.000
29.500
30.000
30.000
30.000
30.000
30.000
30.312
30.500
31.000
32.125
32.312
32.500
33.000
33.000
33.500
34.000
34.250
34.500
35.250
35.375
36.000
36.500
36.500
36.750
37.000
37.250
37.500
38.000
38.250
38.750
38.937
39.000
40.000
40.500
42.500
44.000
15.250
8.250
8.375
11.250
13.750
13.750
26.500

29.812
40.750
29.500
30.000
30.500
30.500
31.000
41.000
41.500
31.500
31.500
32.000
32.500
32.750
33.000
32.375
32.500
33.000
34.125
34.500
34.500
34.500
35.000
35.500
36.000
36.250
36.500
37.250
37.375
38.000
38.000
38.500
38.750
39.000
39.250
39.500
40.000
40.250
40.750
41.000
41.000
42.000
42.500
45.000
46.500
17.250
10.250
10.375
12.750
15.250
15.500
28.000

WIDTH
0.875
0.875
0.750
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.812
0.812
0.812
0.687
0.687
0.750
0.750

MODEL NO

PART NO

SHAFT

BORE

64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

21238-4534
21238-4537
21238-4538
21238-4539
21238-4540
21238-4541
21238-4542
21238-4544
21238-4548
21238-4549
21238-4550
21238-4552
21238-4553
21238-4563
21238-4567
21238-4569
21238-4570
21238-4577
21238-4578
21238-4610
21238-4611
21238-4612
21238-4613
21238-4615
21238-4617
21238-4619
21238-4621
21238-4623
21238-4626
21238-4628
21238-4631
21238-4632
21238-4635
21238-4637
21238-4638
21238-4639
21238-4647
21238-4779
21238-4794
21238-4906
21238-4979
21238-5000
21238-5001
21238-5016
21238-5033
21238-5054
21238-5077
21238-5259
21238-5276
21238-5312
21238-5382
21238-5404

28.500
29.000
29.500
29.500
31.000
31.000
32.750
33.000
33.500
33.500
33.500
33.500
35.500
44.500
38.250
38.250
38.750
39.000
46.500
9.375
11.000
12.000
12.250
15.250
19.250
20.500
21.750
24.000
27.250
28.750
31.250
32.000
41.500
43.500
43.750
48.250
35.250
13.250
26.000
30.250
64.409
30.000
27.625
31.750
31.250
17.500
16.000
21.000
21.750
21.000
14.000
12.875

31.000
32.000
32.000
32.500
33.500
34.000
34.250
35.500
35.625
35.750
36.000
36.417
37.500
46.000
40.750
41.250
41.000
42.250
48.500
11.375
12.500
13.500
13.750
16.750
20.750
22.000
23.250
25.500
29.250
30.750
32.750
34.000
43.500
45.500
45.750
50.250
38.250
15.250
28.500
32.500
66.929
31.616
29.625
33.750
33.250
19.250
18.000
22.500
24.000
22.750
16.250
15.000

WIDTH
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.812
0.687
0.687
0.687
0.687
0.750
0.750
0.750
0.750
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.812
0.812
0.875
0.875
0.866
0.750
0.750
0.875
0.750
0.687
0.875
0.750
0.875
0.750
0.812
0.812

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-95

Oil Seals by Model Number

MODEL NO
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

Garlock

PART NO

SHAFT

BORE

WIDTH

21238-5421
21238-5481
21238-5482
21238-5485
21238-5547
21238-5555
21238-5644
21238-5728
21238-5739
21238-5838
21238-5921
21238-5989
21238-5990
21238-5991
21238-5992
21238-5994
21238-5995
21238-5997
21238-5998
21238-6034
21238-6152
21238-6239
21238-6269
21238-6287
21238-6293
21238-6294
21238-6295
21238-6384
21238-6417
21238-6421
21238-6480
21238-6493
21238-6535
21238-6740
21238-6747
21238-6771
21238-6779
21238-6787
21238-6843
21238-6850
21238-6874
21238-6908
21238-6910
21238-6967
21238-6998
21238-7065
21238-7087
21238-7103
21238-7169
21238-7189
21238-7266
21238-7281

23.000
14.375
59.000
19.250
23.500
42.500
24.000
18.000
31.000
12.000
26.000
10.125
14.750
14.000
15.312
25.187
16.000
25.000
28.000
11.000
33.000
23.750
42.500
20.500
24.000
13.250
22.000
8.500
20.875
25.000
22.437
21.500
21.000
18.375
51.250
15.500
21.500
33.000
22.750
17.625
15.750
34.500
23.250
17.250
25.750
53.150
44.000
18.375
13.250
43.000
22.047
18.897

24.750
16.000
61.000
21.250
25.250
44.250
27.000
19.750
32.500
14.000
27.625
11.750
16.500
15.750
17.312
26.937
18.500
27.500
31.000
13.000
34.687
25.250
45.500
22.750
26.250
15.250
24.500
9.750
23.228
27.250
24.437
23.625
23.000
20.375
53.250
17.750
24.000
34.625
25.000
19.625
17.750
36.000
25.250
18.750
27.250
55.669
46.000
19.937
15.000
45.500
24.016
20.472

0.750
0.687
0.875
0.750
0.750
0.875
0.875
0.687
0.750
0.687
0.750
0.687
0.687
0.687
0.687
0.750
0.812
0.875
0.875
0.687
0.750
1.000
0.875
0.875
0.875
0.687
0.875
0.652
0.875
0.875
0.750
0.875
0.812
0.812
0.875
0.812
0.875
0.750
0.875
0.687
0.687
0.750
0.812
0.750
0.750
0.866
0.875
0.687
0.687
0.875
0.787
0.787

MODEL NO
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64
64

PART NO

SHAFT

BORE

WIDTH

21238-7300
21238-7328
21238-7391
21238-7393
21238-7400
21238-7407
21238-7428
21238-7535
21238-7537
21238-7538
21238-7652
21238-7718
21238-7734
21238-7769
21238-7770
21238-7828
21238-7870
21238-8031
21238-8198
21238-8217
21238-8230
21238-8231
21238-8289
21238-8317
21238-8407
21238-8453
21238-8508
21238-8523
21238-8557
21238-8577
21238-8579
21238-8594
21238-8599
21238-8622
21238-8624
21238-8628
21238-8675
21238-8765
21238-8770
21238-8778
21238-8791
21238-8793
21238-8903
21238-9010
21238-9082
21238-9084
21238-9176
21238-9271
21238-9280
21238-9402
21238-9411
21238-9425

40.500
36.750
11.024
21.260
19.750
21.500
36.750
14.000
32.125
39.750
12.750
8.625
13.250
10.630
36.220
28.000
30.000
27.000
50.000
16.250
30.500
20.250
32.750
46.850
32.000
8.500
15.000
12.000
63.327
30.500
48.000
54.331
40.000
61.024
23.622
41.875
21.750
9.134
20.250
11.250
40.000
29.000
45.000
74.409
22.000
17.750
7.875
15.750
14.187
26.000
37.500
9.750

43.000
39.250
12.598
23.228
22.125
23.500
39.250
16.500
34.625
42.250
14.750
10.750
14.875
12.126
37.717
29.625
31.625
29.500
52.000
18.000
33.500
22.245
35.000
48.819
34.500
10.000
17.250
13.625
65.748
33.000
50.000
56.693
42.500
63.386
25.197
43.500
24.250
10.625
22.500
13.250
42.500
31.500
46.625
76.929
24.250
20.078
9.375
17.312
16.732
28.125
39.000
11.750

0.875
0.875
0.787
0.984
0.875
0.812
0.875
0.812
0.875
0.875
0.687
0.812
0.687
0.687
0.750
0.750
0.750
0.875
0.875
0.687
0.875
0.875
0.875
0.875
0.875
0.687
0.812
0.687
0.787
0.875
0.875
0.984
1.000
0.984
0.787
1.000
0.875
0.687
0.875
0.687
0.875
1.000
1.000
0.984
0.812
0.875
0.687
0.687
0.812
0.875
0.750
0.687

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-96

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

64
64
64
64
64
64
64
64
64
64
64
64
64
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

21238-9504
21238-9637
21238-9695
21238-9706
21238-9712
21238-9766
21238-9772
21238-9840
21238-9863
21238-9892
21238-9893
21238-9911
21238-9984
21527-0015
21527-0035
21527-0139
21527-0141
21527-0143
21527-0145
21527-0147
21527-0149
21527-0151
21527-0153
21527-0155
21527-0213
21527-0215
21527-0217
21527-0219
21527-0221
21527-0223
21527-0225
21527-0227
21527-0229
21527-0231
21527-0251
21527-0321
21527-0323
21527-0325
21527-0327
21527-0329
21527-0331
21527-0333
21527-0335
21527-0336
21527-0337
21527-0339
21527-0341
21527-0347
21527-0349
21527-0351
21527-0352
21527-0353

33.500
15.000
16.937
9.250
8.125
12.687
21.000
22.437
16.500
16.250
20.625
8.750
27.000
0.375
0.438
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.938
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.093
1.093
1.093
1.093
1.093
1.125
1.125
1.125

35.000
17.500
19.291
11.250
10.125
14.750
23.500
24.500
18.000
18.250
22.625
10.500
30.000
0.875
0.875
1.250
1.375
1.500
1.575
1.625
1.750
1.828
1.875
1.984
1.375
1.500
1.575
1.625
1.750
1.828
1.875
1.984
2.000
2.062
1.500
1.575
1.625
1.750
1.828
1.875
1.984
2.000
2.062
2.062
1.625
1.750
1.828
2.000
2.062
1.625
1.625
1.750

WIDTH
0.875
0.812
0.812
0.687
0.687
0.812
0.875
0.750
0.687
0.687
0.812
0.687
0.875
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.312
0.375
0.375
0.375
0.375
0.312
0.375
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

21527-0355
21527-0357
21527-0359
21527-0361
21527-0383
21527-0385
21527-0387
21527-0389
21527-0394
21527-0397
21527-0424
21527-0427
21527-0430
21527-0436
21527-0439
21527-0442
21527-0445
21527-0448
21527-0451
21527-0535
21527-0541
21527-0544
21527-0547
21527-0550
21527-0553
21527-0556
21527-0559
21527-0592
21527-0595
21527-0598
21527-0601
21527-0604
21527-0643
21527-0646
21527-0649
21527-0652
21527-0655
21527-0700
21527-0703
21527-0706
21527-0709
21527-0712
21527-0715
21527-0718
21527-0721
21527-0724
21527-0727
21527-0739
21527-0760
21527-0763
21527-0766
21527-0769

1.125
1.125
1.125
1.125
1.187
1.187
1.187
1.187
1.187
1.187
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.281
1.281
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.437
1.437
1.437
1.437
1.437
1.500
1.500
1.500
1.500
1.500
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.594
1.625
1.625
1.625
1.625

1.828
1.875
2.000
2.062
1.875
1.984
2.000
2.062
2.125
2.250
1.984
2.000
2.062
2.125
2.250
2.375
2.437
1.984
2.000
2.062
2.125
2.250
2.375
2.437
2.497
2.500
2.625
2.125
2.250
2.375
2.437
2.497
2.250
2.375
2.437
2.497
2.500
2.250
2.375
2.437
2.497
2.500
2.625
2.686
2.750
2.756
2.783
2.500
2.375
2.437
2.497
2.500

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-97

Oil Seals by Model Number

MODEL NO
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

Garlock

PART NO

SHAFT

BORE

WIDTH

21527-0772
21527-0775
21527-0778
21527-0781
21527-0784
21527-0787
21527-0826
21527-0829
21527-0832
21527-0835
21527-0838
21527-0841
21527-0844
21527-0847
21527-0853
21527-0859
21527-0898
21527-0901
21527-0904
21527-0907
21527-0910
21527-0913
21527-0916
21527-0919
21527-0922
21527-0925
21527-0928
21527-0931
21527-0934
21527-0937
21527-0940
21527-0946
21527-0955
21527-0964
21527-0967
21527-1042
21527-1045
21527-1048
21527-1051
21527-1054
21527-1057
21527-1060
21527-1063
21527-1066
21527-1069
21527-1075
21527-1114
21527-1117
21527-1120
21527-1123
21527-1129
21527-1132

1.625
1.625
1.625
1.625
1.625
1.625
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.937
1.937
1.937
1.937
1.937
1.937

2.625
2.686
2.750
2.756
2.783
2.875
2.375
2.437
2.497
2.500
2.625
2.686
2.750
2.756
2.875
3.000
2.437
2.497
2.500
2.625
2.686
2.750
2.756
2.783
2.875
2.997
3.000
3.062
2.497
2.500
2.625
2.750
2.875
3.062
3.125
2.625
2.686
2.750
2.756
2.783
2.875
2.997
3.000
3.062
3.125
3.189
2.625
2.686
2.750
2.756
2.875
2.997

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

PART NO

SHAFT

BORE

WIDTH

21527-1135
21527-1138
21527-1141
21527-1144
21527-1147
21527-1150
21527-1153
21527-1156
21527-1162
21527-1168
21527-1174
21527-1177
21527-1180
21527-1183
21527-1186
21527-1189
21527-1192
21527-1195
21527-1198
21527-1201
21527-1204
21527-1207
21527-1210
21527-1213
21527-1216
21527-1219
21527-1252
21527-1255
21527-1258
21527-1261
21527-1264
21527-1267
21527-1270
21527-1276
21527-1279
21527-1321
21527-1324
21527-1327
21527-1330
21527-1333
21527-1336
21527-1339
21527-1345
21527-1348
21527-1351
21527-1357
21527-1402
21527-1405
21527-1408
21527-1411
21527-1414
21527-1417

1.937
1.937
1.937
1.937
1.937
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.187
2.187
2.187
2.187
2.187
2.187

3.000
3.062
3.125
3.147
3.189
2.686
2.750
2.756
2.875
3.000
3.125
3.147
3.189
3.246
2.686
2.750
2.756
2.783
2.875
2.997
3.000
3.062
3.125
3.147
3.189
3.246
2.875
2.997
3.000
3.062
3.125
3.147
3.189
3.250
3.350
2.875
2.997
3.000
3.062
3.125
3.147
3.189
3.250
3.350
3.372
3.500
3.000
3.062
3.125
3.147
3.189
3.246

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-98

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

21527-1420
21527-1423
21527-1426
21527-1429
21527-1432
21527-1471
21527-1474
21527-1477
21527-1480
21527-1483
21527-1486
21527-1489
21527-1492
21527-1495
21527-1498
21527-1501
21527-1504
21527-1597
21527-1639
21527-1642
21527-1645
21527-1648
21527-1651
21527-1654
21527-1656
21527-1657
21527-1660
21527-1663
21527-1666
21527-1669
21527-1672
21527-1675
21527-1678
21527-1801
21527-1804
21527-1807
21527-1810
21527-1813
21527-1816
21527-1819
21527-1822
21527-1825
21527-1828
21527-1831
21527-1834
21527-1930
21527-1933
21527-1936
21527-1939
21527-1942
21527-1945
21527-1948

2.187
2.187
2.187
2.187
2.187
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.344
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.625
2.625
2.625
2.625
2.625
2.625
2.625

3.250
3.350
3.372
3.481
3.500
2.997
3.000
3.062
3.125
3.147
3.189
3.246
3.250
3.350
3.372
3.481
3.500
3.062
3.062
3.125
3.147
3.189
3.246
3.250
3.250
3.350
3.372
3.481
3.500
3.543
3.623
3.751
3.876
3.189
3.246
3.250
3.350
3.372
3.481
3.500
3.543
3.623
3.751
3.876
4.003
3.350
3.372
3.481
3.500
3.543
3.623
3.751

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO

PART NO

SHAFT

BORE

WIDTH

66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

21527-1951
21527-1954
21527-2011
21527-2014
21527-2020
21527-2023
21527-2029
21527-2032
21527-2035
21527-2037
21527-2038
21527-2041
21527-2044
21527-2047
21527-2050
21527-2120
21527-2168
21527-2170
21527-2171
21527-2173
21527-2174
21527-2249
21527-2252
21527-2255
21527-2261
21527-2264
21527-2267
21527-2366
21527-2369
21527-2372
21527-2375
21527-2378
21527-2381
21527-2384
21527-2387
21527-2390
21527-2462
21527-2465
21527-2468
21527-2471
21527-2474
21527-2480
21527-2537
21527-2540
21527-2543
21527-2546
21527-2549
21527-2555
21527-2561
21527-2564
21527-2567
21527-2657

2.625
2.625
2.719
2.719
2.719
2.719
2.719
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
3.000
3.000
3.000
3.000
3.000
3.000
3.187
3.187
3.187
3.187
3.187
3.187
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.750
3.750
3.750
3.750
3.750
3.750
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.250

3.876
4.003
3.481
3.500
3.623
3.751
4.003
3.481
3.500
3.500
3.543
3.623
3.751
3.876
4.003
3.751
3.751
3.751
3.876
3.876
4.003
4.249
4.375
4.500
4.750
4.875
4.999
4.500
4.625
4.750
4.875
4.999
5.125
5.250
5.375
5.500
4.750
4.875
4.999
5.125
5.250
5.500
4.999
5.125
5.250
5.375
5.500
5.750
6.000
6.125
6.250
5.250

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-99

Oil Seals by Model Number

MODEL NO
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66

Garlock

PART NO

SHAFT

BORE

WIDTH

21527-2660
21527-2663
21527-2729
21527-2753
21527-2756
21527-2762
21527-2771
21527-2879
21527-3125
21527-3128
21527-3134
21527-3275
21527-3278
21527-3281
21527-3293
21527-3319
21527-3580
21527-3582
21527-3584
21527-3586
21527-3588
21527-3865
21527-3872
21527-3876
21527-3877
21527-3880
21527-3883
21527-3888
21527-3897
21527-3900
21527-3904
21527-4605
21527-4606
21527-4640
21527-4645
21527-4899
21527-5502
21527-6471
21527-6486
21527-6656
21527-6658
21527-6686
21527-6724
21527-7242
21527-7246
21527-7249
21527-7282
21527-7852
21527-8033
21527-8066
21527-8097
21527-8258

4.250
4.250
4.375
4.500
4.500
4.500
4.500
4.875
5.375
5.375
5.375
5.750
5.750
5.750
5.750
5.875
7.875
7.875
7.875
7.875
7.875
0.438
1.125
1.187
1.187
1.500
1.562
1.875
2.062
2.125
2.187
0.750
1.750
3.500
1.562
1.750
0.875
2.750
1.562
1.969
1.375
1.562
1.750
1.125
1.125
3.750
1.750
1.250
0.750
1.125
2.000
1.875

5.375
5.500
6.250
5.500
5.625
5.875
6.250
6.250
6.500
6.625
6.875
6.750
6.875
7.000
7.500
7.000
8.875
9.000
9.125
9.250
9.375
1.375
1.984
1.828
2.048
2.441
2.875
3.149
2.783
2.882
2.997
1.375
3.625
4.500
2.561
3.543
1.375
3.750
3.544
2.835
2.441
3.150
3.125
2.125
2.250
5.375
3.189
2.047
1.260
1.654
3.150
3.000

0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.406
0.500
0.469
0.500
0.437
0.406
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.312
0.312
0.375
0.562

MODEL NO
66
66
66
66F1
66R1
66R1
66R2
66R2
66R2
66R2
66T2
66T2
66TF
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67

PART NO

SHAFT

BORE

WIDTH

21527-8347
21527-8369
21527-9620
23692-8498
23722-6795
23722-8728
23702-6599
23702-6651
23702-7197
23702-7563
23728-4819
23728-7128
23763-6914
21528-0050
21528-0051
21528-0053
21528-0055
21528-0057
21528-0067
21528-0069
21528-0071
21528-0073
21528-0075
21528-0087
21528-0089
21528-0091
21528-0093
21528-0109
21528-0111
21528-0113
21528-0115
21528-0117
21528-0119
21528-0139
21528-0140
21528-0141
21528-0143
21528-0147
21528-0149
21528-0151
21528-0153
21528-0157
21528-0158
21528-0159
21528-0160
21528-0161
21528-0165
21528-0167
21528-0213
21528-0215
21528-0217
21528-0219

0.875
2.375
1.750
2.250
2.250
2.500
2.875
2.625
3.000
2.000
0.937
5.750
5.875
0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.562
0.562
0.625
0.625
0.625
0.625
0.687
0.687
0.687
0.687
0.687
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.875
0.875
0.875
0.875

1.378
3.150
2.441
2.997
2.997
3.372
4.003
3.751
4.003
2.750
1.500
7.000
7.125
1.000
1.125
1.250
1.375
1.500
1.125
1.250
1.375
1.500
1.575
1.125
1.250
1.375
1.500
1.125
1.250
1.375
1.500
1.575
1.625
1.250
1.250
1.375
1.500
1.625
1.750
1.828
1.875
1.250
1.250
1.375
1.375
1.500
1.625
1.750
1.375
1.500
1.575
1.625

0.312
0.375
0.375
0.750
0.687
0.687
0.687
0.687
0.687
0.687
0.562
0.969
0.828
0.375
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.375
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.312

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-100

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67

21528-0221
21528-0223
21528-0225
21528-0229
21528-0231
21528-0269
21528-0273
21528-0275
21528-0287
21528-0291
21528-0293
21528-0295
21528-0297
21528-0300
21528-0301
21528-0303
21528-0351
21528-0353
21528-0355
21528-0357
21528-0359
21528-0360
21528-0361
21528-0363
21528-0427
21528-0535
21528-0541
21528-0544
21528-0547
21528-0556
21528-0643
21528-0646
21528-0648
21528-0655
21528-0658
21528-0664
21528-0700
21528-0898
21528-0904
21528-0913
21528-0922
21528-0925
21528-0928
21528-1048
21528-1051
21528-1057
21528-1063
21528-1068
21528-1186
21528-1189
21528-1198
21528-1204

0.875
0.875
0.875
0.875
0.875
0.969
0.969
0.969
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.156
1.250
1.375
1.375
1.375
1.375
1.375
1.500
1.500
1.500
1.500
1.500
1.500
1.562
1.750
1.750
1.750
1.750
1.750
1.750
1.875
1.875
1.875
1.875
1.875
2.000
2.000
2.000
2.000

1.750
1.828
1.875
2.000
2.062
1.500
1.625
1.750
1.500
1.625
1.750
1.828
1.875
1.984
2.000
2.062
1.625
1.750
1.828
1.875
2.000
2.000
2.062
1.875
2.000
2.062
2.125
2.250
2.375
2.500
2.250
2.375
2.375
2.500
2.625
2.750
2.250
2.437
2.500
2.750
2.875
2.997
3.000
2.750
2.756
2.875
3.000
3.062
2.686
2.750
2.875
3.000

0.375
0.375
0.375
0.375
0.375
0.312
0.312
0.375
0.312
0.312
0.375
0.375
0.375
0.437
0.375
0.375
0.312
0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375

MODEL NO
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67R2
67R2
67R2
67T2
67T2
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68

PART NO

SHAFT

BORE

WIDTH

21528-1321
21528-1324
21528-1327
21528-1471
21528-1474
21528-1492
21528-1504
21528-1639
21528-1654
21528-1666
21528-1669
21528-1801
21528-1807
21528-1819
21528-1822
21528-1828
21528-1834
21528-2032
21528-2035
21528-2038
21528-2041
21528-2044
21528-2050
21528-2168
21528-2174
21528-3888
21528-4584
21528-5071
21528-5551
23683-6566
23683-6593
23683-6720
23621-6662
23621-8562
21823-0051
21823-0053
21823-0055
21823-0057
21823-0067
21823-0069
21823-0071
21823-0073
21823-0075
21823-0087
21823-0089
21823-0091
21823-0093
21823-0109
21823-0111
21823-0113
21823-0115
21823-0117

2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.500
2.500
2.500
2.500
2.500
2.500
2.750
2.750
2.750
2.750
2.750
2.750
3.000
3.000
1.875
1.375
0.562
3.250
2.500
2.125
0.750
0.781
0.781
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.562
0.562
0.625
0.625
0.625
0.625
0.687
0.687
0.687
0.687
0.687

2.875
2.997
3.000
2.997
3.000
3.250
3.500
3.062
3.250
3.500
3.543
3.189
3.250
3.500
3.543
3.751
4.003
3.481
3.500
3.543
3.623
3.751
4.003
3.751
4.003
3.149
2.835
1.378
4.000
3.751
3.000
1.250
1.500
1.250
1.125
1.250
1.375
1.500
1.125
1.250
1.375
1.500
1.575
1.125
1.250
1.375
1.500
1.125
1.250
1.375
1.500
1.575

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.687
0.687
0.562
0.562
0.562
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-101

Oil Seals by Model Number

MODEL NO
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68

Garlock

PART NO

SHAFT

BORE

WIDTH

21823-0119
21823-0139
21823-0140
21823-0141
21823-0143
21823-0147
21823-0149
21823-0151
21823-0153
21823-0157
21823-0158
21823-0159
21823-0160
21823-0161
21823-0165
21823-0167
21823-0213
21823-0215
21823-0217
21823-0219
21823-0221
21823-0223
21823-0225
21823-0229
21823-0231
21823-0269
21823-0273
21823-0275
21823-0287
21823-0291
21823-0293
21823-0295
21823-0297
21823-0301
21823-0303
21823-0351
21823-0353
21823-0355
21823-0357
21823-0359
21823-0360
21823-0361
21823-0363
21823-0535
21823-0541
21823-0544
21823-0547
21823-0556
21823-0643
21823-0646
21823-0648
21823-0655

0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.969
0.969
0.969
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.156
1.375
1.375
1.375
1.375
1.375
1.500
1.500
1.500
1.500

1.625
1.250
1.250
1.375
1.500
1.625
1.750
1.828
1.875
1.250
1.250
1.375
1.375
1.500
1.625
1.750
1.375
1.500
1.575
1.625
1.750
1.828
1.875
2.000
2.062
1.500
1.625
1.750
1.500
1.625
1.750
1.828
1.875
2.000
2.062
1.625
1.750
1.828
1.875
2.000
2.000
2.062
1.875
2.062
2.125
2.250
2.375
2.500
2.250
2.375
2.375
2.500

0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.375
0.375
0.312
0.375
0.312
0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.312
0.312
0.375
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.312
0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375

MODEL NO
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68R2
71
71
71
71
71
71
71

PART NO

SHAFT

BORE

WIDTH

21823-0658
21823-0664
21823-0898
21823-0904
21823-0913
21823-0922
21823-0928
21823-1048
21823-1051
21823-1057
21823-1063
21823-1186
21823-1189
21823-1198
21823-1204
21823-1321
21823-1324
21823-1327
21823-1471
21823-1474
21823-1492
21823-1504
21823-1639
21823-1654
21823-1666
21823-1669
21823-1801
21823-1804
21823-1807
21823-1819
21823-1822
21823-1828
21823-1834
21823-2032
21823-2035
21823-2038
21823-2041
21823-2044
21823-2050
21823-2168
21823-2174
21823-3888
21823-4584
21823-5071
23727-6608
26001-0005
26001-0013
26001-5064
26001-5239
26001-6060
26001-6069
26001-6108

1.500
1.500
1.750
1.750
1.750
1.750
1.750
1.875
1.875
1.875
1.875
2.000
2.000
2.000
2.000
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.750
2.750
2.750
2.750
2.750
2.750
3.000
3.000
1.875
1.375
0.562
2.000
0.313
0.375
2.125
1.250
0.438
0.500
0.750

2.625
2.750
2.437
2.500
2.750
2.875
3.000
2.750
2.756
2.875
3.000
2.686
2.750
2.875
3.000
2.875
2.997
3.000
2.997
3.000
3.250
3.500
3.062
3.250
3.500
3.543
3.189
3.246
3.250
3.500
3.543
3.751
4.003
3.481
3.500
3.543
3.623
3.751
4.003
3.751
4.003
3.149
2.835
1.378
2.686
0.750
0.750
2.500
1.750
0.687
0.750
1.000

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.687
0.250
0.250
0.250
0.250
0.125
0.109
0.109

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-102

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71

26001-6133
26001-6148
26001-6151
26001-6156
26001-6162
26001-6169
26001-6183
26001-6193
26001-6221
26001-6222
26001-6223
26001-6226
26001-6227
26001-6230
26001-6240
26001-6241
26001-6242
26001-6267
26001-6284
26001-6292
26001-6304
26001-6308
26001-6325
26001-6553
26001-7000
26001-7004
26001-7005
26001-7007
26001-7008
26001-7009
26001-7011
26001-7012
26001-7013
26001-7014
26001-7016
26001-7017
26001-7020
26001-7021
26001-7022
26001-7023
26001-7024
26001-7025
26001-7027
26001-7028
26001-7029
26001-7030
26001-7031
26001-7032
26001-7033
26001-7034
26001-7035
26001-7037

0.875
1.000
1.000
1.000
1.125
1.125
1.250
1.312
1.500
1.500
1.500
1.625
1.625
1.625
1.750
1.750
1.750
2.000
2.250
2.500
2.750
3.000
4.000
3.125
0.250
0.375
0.375
0.438
0.438
0.469
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812

1.250
1.250
1.312
1.562
1.375
1.625
1.625
1.562
1.750
1.875
1.875
1.875
2.000
2.375
2.000
2.125
2.125
2.250
2.625
2.875
3.125
3.500
4.562
3.625
0.500
0.562
0.625
0.875
1.024
0.703
0.687
0.687
0.750
0.875
1.250
0.750
0.812
1.000
1.062
1.125
1.000
0.875
1.000
1.062
1.064
1.125
1.187
1.250
1.250
1.375
1.437
1.062

0.187
0.109
0.125
0.187
0.109
0.250
0.187
0.125
0.109
0.125
0.187
0.109
0.109
0.250
0.109
0.125
0.187
0.109
0.109
0.109
0.187
0.250
0.109
0.109
0.125
0.094
0.125
0.187
0.250
0.125
0.094
0.125
0.125
0.125
0.250
0.094
0.094
0.250
0.187
0.187
0.125
0.094
0.125
0.187
0.109
0.125
0.156
0.125
0.250
0.250
0.250
0.125

MODEL NO

PART NO

SHAFT

BORE

WIDTH

71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71

26001-7038
26001-7041
26001-7042
26001-7045
26001-7046
26001-7047
26001-7049
26001-7052
26001-7055
26001-7056
26001-7057
26001-7060
26001-7061
26001-7062
26001-7068
26001-7070
26001-7071
26001-7080
26001-7081
26001-7083
26001-7084
26001-7085
26001-7086
26001-7088
26001-7089
26001-7090
26001-7092
26001-7093
26001-7095
26001-7096
26001-7097
26001-7530
26001-7546
26001-7619
26001-7705
26001-7826
26001-7992
26001-8000
26001-8361
26001-8379
26001-8715
26001-8801
26001-8810
26001-8873
26001-9016
26001-9413
26001-9428
26001-9565
26001-9643
26001-9668
26001-9758
26001-9961

0.812
0.875
0.875
0.875
0.875
0.937
1.000
1.000
1.000
1.062
1.125
1.187
1.187
1.250
1.375
1.437
1.437
1.750
1.750
1.812
1.875
1.937
2.000
2.437
2.500
2.500
2.625
2.750
3.500
3.500
3.750
2.000
4.250
0.781
0.781
0.750
4.125
0.875
2.250
0.667
1.375
0.313
3.250
1.000
4.000
0.812
0.625
7.250
1.114
3.500
0.687
1.375

1.066
1.125
1.187
1.375
1.437
1.187
1.250
1.500
1.750
1.562
1.375
2.441
1.437
1.500
1.625
1.750
2.062
2.250
2.375
2.375
2.375
2.375
2.375
2.937
3.125
3.250
3.250
3.125
3.876
4.003
4.375
2.375
4.812
1.625
1.250
0.937
4.686
1.255
3.150
1.187
1.687
0.506
3.812
1.500
4.500
1.377
1.125
8.000
1.375
4.062
1.375
1.625

0.125
0.125
0.156
0.125
0.250
0.125
0.125
0.125
0.250
0.125
0.125
0.250
0.125
0.125
0.125
0.156
0.250
0.250
0.250
0.187
0.250
0.187
0.250
0.187
0.250
0.250
0.187
0.109
0.187
0.250
0.312
0.187
0.109
0.125
0.187
0.125
0.109
0.125
0.375
0.125
0.109
0.125
0.109
0.188
0.250
0.156
0.125
0.312
0.125
0.109
0.125
0.109

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-103

Oil Seals by Model Number

MODEL NO
71
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76

Garlock

PART NO

SHAFT

BORE

WIDTH

26001-9981
26193-0013
26193-0088
26193-0261
26193-0541
26193-4582
26193-4701
26193-5085
26193-5325
26193-5546
26193-6035
26193-6036
26193-6071
26193-6099
26193-6113
26193-6125
26193-6133
26193-6156
26193-6183
26193-6186
26193-6194
26193-6195
26193-6223
26193-6233
26193-6242
26193-6262
26193-6591
26193-6627
26193-6642
26193-7192
26193-7472
26193-7501
26193-7503
26193-7504
26193-7505
26193-7510
26193-7512
26193-7513
26193-7514
26193-7516
26193-7517
26193-7518
26193-7519
26193-7520
26193-7527
26193-7530
26193-7531
26193-7532
26193-7534
26193-7694
26193-7802
26193-7995

3.750
0.375
0.625
0.937
1.375
2.000
1.125
0.656
1.937
0.812
0.250
1.469
0.500
0.656
0.750
0.812
0.875
1.000
1.250
1.250
1.312
1.312
1.500
0.937
1.750
1.875
3.250
2.863
1.087
3.750
6.187
0.500
0.562
0.562
0.687
1.000
1.125
1.203
1.219
1.250
1.500
1.250
1.312
1.375
1.687
2.000
2.250
2.500
5.500
2.000
0.812
2.125

4.312
0.750
1.125
1.875
2.125
2.625
2.835
1.250
2.412
1.237
0.562
2.000
0.801
1.575
1.125
1.125
1.250
1.562
1.625
1.750
1.605
1.625
1.875
1.375
2.125
2.250
3.940
4.724
1.686
4.750
7.500
0.875
0.875
1.000
1.062
1.437
1.500
2.048
2.048
1.687
2.000
2.000
1.750
1.750
2.125
2.375
2.750
3.062
6.250
3.544
1.236
2.762

0.109
0.250
0.375
0.375
0.375
0.312
0.375
0.250
0.469
0.155
0.187
0.312
0.187
0.250
0.187
0.187
0.187
0.187
0.187
0.266
0.156
0.156
0.187
0.312
0.187
0.187
0.250
0.500
0.250
0.250
0.625
0.312
0.187
0.187
0.187
0.250
0.187
0.187
0.187
0.187
0.250
0.250
0.187
0.187
0.187
0.187
0.250
0.250
0.312
0.375
0.187
0.250

MODEL NO
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87

PART NO

SHAFT

BORE

WIDTH

26193-8186
26193-8356
26193-8461
26193-8479
26193-8876
26193-8952
26193-8961
26193-9038
26193-9370
26193-9490
26193-9518
26193-9578
26193-9675
26193-9768
26193-9855
26193-9856
26193-9879
26193-9962
26193-9971
26193-9975
26193-9991
26080-1040
26080-1083
26080-1202
26080-1382
26080-1383
26080-1387
26080-2027
26080-2134
26080-2207
26080-2268
26080-2388
26080-2454
26080-2547
26080-2884
26080-2886
26080-3326
26080-3522
26080-3566
26080-3623
26080-3818
26080-3831
26080-3832
26080-3878
26080-3891
26080-4030
26080-4142
26080-4170
26080-4177
26080-4218
26080-4231
26080-4281

2.000
0.667
1.181
1.375
3.062
0.875
37.375
1.156
0.562
1.000
1.000
8.000
1.750
1.937
0.866
0.669
4.000
1.687
1.625
2.125
0.781
12.250
22.750
14.173
22.047
19.685
17.126
30.500
14.488
25.000
8.250
20.866
12.205
23.000
24.803
50.984
15.000
7.250
7.625
9.000
8.250
34.750
8.875
28.000
14.250
10.750
14.500
15.750
16.000
19.000
20.000
22.750

3.750
1.187
1.683
1.750
4.003
1.575
38.625
1.575
1.378
1.625
1.375
8.875
2.250
2.437
1.259
1.102
4.625
2.250
2.125
3.000
1.375
14.250
25.500
15.906
23.780
21.654
19.094
33.000
16.496
27.000
10.260
22.441
13.937
25.500
26.181
52.165
16.500
8.500
9.125
11.000
9.500
36.750
10.125
30.500
16.250
12.750
16.000
17.250
17.500
20.500
22.000
24.750

0.500
0.187
0.250
0.219
0.375
0.187
0.500
0.312
0.250
0.250
0.187
0.437
0.312
0.312
0.275
0.275
0.312
0.250
0.250
0.312
0.250
1.250
0.875
0.788
0.709
0.787
0.787
1.000
0.811
0.906
0.687
0.787
0.787
1.000
0.563
0.787
0.625
0.625
0.625
0.750
0.750
0.875
0.625
0.875
0.625
0.750
0.688
0.687
0.687
0.750
0.625
0.875

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-104

Rev. 1/01

Garlock
MODEL NO
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88

Oil Seals by Model Number

PART NO

SHAFT

BORE

26080-4285
26080-4318
26080-4348
26080-4357
26080-4421
26080-4473
26080-4498
26080-4629
26080-4635
26080-4805
26080-4950
26080-5077
26080-5168
26080-5334
26080-6787
26080-6980
26080-9927
26088-1924
26188-1924
26088-2676
26188-2676
26088-2982
26188-2982
26088-3067
26188-3067
26088-3522
26188-3522
26088-3764
26188-3764
26088-3784
26188-3784
26088-3878
26188-3878
26088-3934
26188-3934
26088-4071
26188-4071
26088-4079
26188-4079
26088-4121
26188-4121
26088-4145
26188-4145
26088-4163
26188-4163
26088-4170
26188-4170
26088-4181
26188-4181
26088-4186
26188-4186
26088-4188

23.000
25.500
29.000
30.000
36.000
42.500
40.000
15.748
41.500
10.236
10.000
16.000
17.000
9.055
33.000
19.500
14.000
14.375
14.375
14.500
14.500
13.500
13.500
5.250
5.250
7.250
7.250
22.250
22.250
27.500
27.500
28.000
28.000
8.375
8.375
12.000
12.000
12.500
12.500
13.500
13.500
14.500
14.500
15.500
15.500
15.750
15.750
16.250
16.250
16.500
16.500
17.000

25.500
27.500
31.000
32.000
38.000
45.000
42.000
17.480
43.500
11.969
11.500
18.000
19.000
10.236
34.625
21.500
15.750
16.537
16.537
16.000
16.000
15.500
15.500
6.500
6.500
8.500
8.500
24.250
24.250
29.500
29.500
30.500
30.500
9.875
9.875
14.000
14.000
14.000
14.000
15.000
15.000
16.500
16.500
17.500
17.500
17.250
17.250
17.750
17.750
18.500
18.500
18.500

WIDTH
0.875
0.875
0.875
0.875
0.875
0.875
1.000
0.787
0.875
0.787
0.625
0.875
0.750
0.591
0.750
0.750
0.875
0.590
0.590
0.562
0.562
0.688
0.688
0.625
0.625
0.625
0.625
0.875
0.875
1.000
1.000
0.875
0.875
0.750
0.750
0.750
0.750
0.687
0.687
0.688
0.688
0.812
0.812
0.812
0.812
0.687
0.687
0.687
0.687
0.812
0.812
0.687

MODEL NO
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88

PART NO

SHAFT

BORE

26188-4188
26088-4210
26188-4210
26088-4218
26188-4218
26088-4239
26188-4239
26088-4246
26188-4246
26088-4248
26188-4248
26088-4254
26188-4254
26088-4265
26188-4265
26088-4270
26188-4270
26088-4308
26188-4308
26088-4318
26188-4318
26088-4330
26188-4330
26088-4333
26188-4333
26088-4346
26188-4346
26088-4348
26188-4348
26088-4365
26188-4365
26088-4377
26188-4377
26088-4382
26188-4382
26088-4389
26188-4389
26088-4550
26188-4550
26088-4567
26188-4567
26088-4637
26188-4637
26088-4651
26188-4651
26088-4685
26188-4685
26088-4704
26188-4704
26088-5116
26188-5116
26088-5619

17.000
18.000
18.000
19.000
19.000
20.250
20.250
20.500
20.500
20.750
20.750
21.250
21.250
21.750
21.750
22.000
22.000
25.000
25.000
25.500
25.500
26.125
26.125
27.000
27.000
28.500
28.500
29.000
29.000
30.500
30.500
32.500
32.500
33.000
33.000
33.500
33.500
33.500
33.500
38.250
38.250
43.500
43.500
4.000
4.000
37.812
37.812
17.559
17.559
16.000
16.000
21.000

18.500
20.000
20.000
20.500
20.500
21.750
21.750
22.500
22.500
22.750
22.750
23.250
23.250
23.750
23.750
24.000
24.000
26.500
26.500
27.500
27.500
28.125
28.125
29.000
29.000
30.500
30.500
31.000
31.000
32.500
32.500
34.500
34.500
35.000
35.000
35.500
35.500
36.000
36.000
40.750
40.750
45.500
45.500
5.000
5.000
40.945
40.945
19.135
19.135
18.000
18.000
23.000

WIDTH
0.687
0.875
0.875
0.750
0.750
0.750
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.500
0.500
0.875
0.875
0.630
0.630
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-105

Oil Seals by Model Number

MODEL NO
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
88
88NS
91
91
91
91
91
91
91
91
91

Garlock

PART NO

SHAFT

BORE

WIDTH

26188-5619
26088-5921
26188-5921
26088-5997
26188-5997
26088-6185
26188-6185
26088-6264
26188-6264
26088-6383
26188-6383
26088-6386
26188-6386
26088-6618
26188-6618
26088-6829
26188-6829
26088-6980
26188-6980
26088-7172
26188-7172
26088-7539
26188-7539
26088-7788
26188-7788
26088-7790
26188-7790
26088-7810
26188-7810
26088-7828
26188-7828
26088-7870
26188-7870
26088-8487
26188-8487
26088-8525
26188-8525
26088-8664
26188-8664
26088-8794
26188-8794
26088-9126
26188-9126
27023-0982
27023-6053
27023-6113
27023-6279
27023-6635
27023-7001
27023-7020
27023-7027
27023-9014

21.000
26.000
26.000
25.000
25.000
7.750
7.750
13.250
13.250
8.500
8.500
8.750
8.750
15.250
15.250
12.250
12.250
19.500
19.500
5.750
5.750
15.250
15.250
29.500
29.500
33.000
33.000
37.500
37.500
28.000
28.000
30.000
30.000
30.000
30.000
11.811
11.811
14.344
14.344
14.750
14.750
7.375
7.375
1.812
0.313
0.750
1.187
0.438
0.281
0.625
0.750
2.500

23.000
27.625
27.625
27.500
27.500
8.750
8.750
15.250
15.250
9.500
9.500
10.000
10.000
17.250
17.250
14.250
14.250
21.500
21.500
6.750
6.750
17.250
17.250
32.000
32.000
35.500
35.500
39.500
39.500
29.625
29.625
31.625
31.625
31.600
31.600
13.543
13.543
16.000
16.000
16.500
16.500
8.375
8.375
2.750
0.562
1.125
1.625
0.621
0.686
0.812
1.000
3.000

0.750
0.750
0.750
0.875
0.875
0.438
0.438
0.750
0.750
0.500
0.500
0.625
0.625
0.625
0.625
0.750
0.750
0.750
0.750
0.438
0.438
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.770
0.770
0.807
0.807
0.687
0.687
0.875
0.875
0.637
0.637
0.375
0.156
0.187
0.250
0.125
0.125
0.094
0.125
0.250

MODEL NO
91
91
91
91
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92

PART NO

SHAFT

BORE

WIDTH

27023-9508
27023-9574
27023-9660
27023-9822
27063-0004
27063-0012
27063-0020
27063-0022
27063-0024
27063-0026
27063-0028
27063-0030
27063-0032
27063-0033
27063-0048
27063-0064
27063-0066
27063-0074
27063-0087
27063-0118
27063-0120
27063-0154
27063-0164
27063-0176
27063-0184
27063-0188
27063-0194
27063-0196
27063-0198
27063-0206
27063-0209
27063-0210
27063-0212
27063-0213
27063-0230
27063-0232
27063-0250
27063-0254
27063-0262
27063-0272
27063-0280
27063-0284
27063-0312
27063-0316
27063-0318
27063-0320
27063-0332
27063-0340
27063-0342
27063-0348
27063-0350
27063-0364

0.625
3.000
0.469
1.750
0.394
0.394
0.472
0.472
0.472
0.551
0.591
0.591
0.591
0.591
0.630
0.669
0.669
0.709
0.625
0.748
0.787
0.787
0.787
0.812
0.787
0.787
0.787
0.787
0.866
0.866
0.945
0.945
0.984
0.875
0.984
0.984
0.984
0.984
1.024
1.024
1.102
1.102
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.260
1.260

1.125
3.406
0.718
2.375
0.748
0.984
0.866
0.984
1.102
0.945
0.945
1.024
1.260
1.378
1.181
1.181
1.575
1.181
1.125
1.260
1.181
1.260
1.378
1.250
1.575
1.654
1.850
2.047
1.575
1.850
1.378
1.575
1.378
1.375
1.457
1.654
1.850
2.047
1.654
1.850
1.496
1.575
1.575
1.654
1.772
1.850
1.890
2.047
2.441
2.835
1.850
2.047

0.250
0.203
0.125
0.312
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.312
0.276
0.276
0.276
0.276
0.375
0.276
0.276
0.276
0.394
0.276
0.276
0.276
0.276
0.276
0.312
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.315
0.276
0.315
0.276
0.276
0.315
0.276
0.276

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-106

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92

27063-0366
27063-0368
27063-0371
27063-0376
27063-0378
27063-0379
27063-0381
27063-0382
27063-0391
27063-0392
27063-0393
27063-0406
27063-0423
27063-0435
27063-0449
27063-0452
27063-0488
27063-0512
27063-0516
27063-0520
27063-0522
27063-0533
27063-0534
27063-0535
27063-0558
27063-0563
27063-0567
27063-0571
27063-0572
27063-0573
27063-0574
27063-0575
27063-0576
27063-0585
27063-0588
27063-0606
27063-0629
27063-0633
27063-0635
27063-0642
27063-0653
27063-0672
27063-0683
27063-0684
27063-0698
27063-0710
27063-0729
27063-0733
27063-0735
27063-0745
27063-0749
27063-0759

1.378
1.378
1.378
1.378
1.417
1.417
1.496
1.496
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.654
1.772
1.772
1.772
1.772
1.850
1.890
1.890
1.375
1.890
1.969
1.969
1.969
2.047
2.047
2.165
2.165
2.165
2.165
2.205
2.205
2.205
2.205
2.283
2.283
2.362
2.362
2.362
2.441
2.520
2.559
2.559
2.559
2.677
2.283
2.677
2.756

1.850
1.969
2.165
2.441
1.850
2.126
2.165
2.441
2.047
2.165
2.205
2.283
2.441
2.835
3.150
2.362
2.362
2.835
3.150
3.346
2.559
2.441
2.559
2.062
2.835
2.559
2.677
2.835
2.677
2.835
2.756
2.953
3.150
3.346
2.756
2.835
3.150
3.346
3.150
3.346
3.150
3.346
3.543
3.543
3.150
3.346
3.543
3.740
3.543
2.835
3.937
3.937

0.276
0.276
0.315
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.276
0.315
0.276
0.276
0.394
0.276
0.276
0.315
0.394
0.394
0.394
0.315
0.394
0.375
0.315
0.315
0.315
0.315
0.315
0.315
0.315
0.394
0.315
0.315
0.315
0.315
0.315
0.315
0.315
0.394
0.315
0.315
0.315
0.394
0.315
0.394
0.394
0.394
0.394
0.315
0.394
0.394

MODEL NO

PART NO

SHAFT

BORE

WIDTH

92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92

27063-0770
27063-0776
27063-0791
27063-0793
27063-0797
27063-0809
27063-0819
27063-0824
27063-0825
27063-0831
27063-0833
27063-0834
27063-0835
27063-0850
27063-0851
27063-0852
27063-0860
27063-0866
27063-0869
27063-0873
27063-0875
27063-0876
27063-0904
27063-1010
27063-1718
27063-1871
27063-2887
27063-3863
27063-4656
27063-5249
27063-5306
27063-5774
27063-5965
27063-6050
27063-6055
27063-6077
27063-6100
27063-6113
27063-6167
27063-6169
27063-6197
27063-6218
27063-6289
27063-6308
27063-6313
27063-6983
27063-7021
27063-7034
27063-7082
27063-7376
27063-7518
27063-7521

2.835
2.835
2.835
2.441
2.953
2.953
2.953
2.953
3.150
3.150
3.346
3.465
1.687
3.740
3.740
3.937
3.937
4.134
4.528
4.921
5.906
6.299
1.750
3.740
5.512
0.745
4.921
0.250
5.118
1.625
1.000
2.250
0.781
0.625
0.313
0.500
1.000
0.750
1.125
1.125
1.312
1.453
0.750
3.000
3.250
0.812
0.625
0.750
1.750
4.724
1.250
1.375

3.543
3.740
3.937
3.346
3.740
3.937
4.331
4.724
4.134
4.331
4.528
4.331
2.500
4.528
5.118
4.724
4.921
5.512
5.709
6.299
7.087
7.283
2.500
4.921
6.693
1.357
5.906
0.750
6.299
2.623
1.500
3.125
1.250
1.375
0.687
1.125
2.000
1.125
1.437
1.625
1.750
2.047
1.575
3.500
4.263
1.250
1.000
1.375
2.500
5.906
2.000
1.875

0.394
0.394
0.394
0.394
0.394
0.394
0.472
0.472
0.472
0.394
0.512
0.472
0.375
0.472
0.472
0.394
0.472
0.472
0.472
0.472
0.472
0.394
0.375
0.472
0.472
0.318
0.472
0.250
0.472
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.187
0.266
0.250
0.250
0.312
0.250
0.250
0.437
0.250
0.250
0.250
0.250
0.472
0.250
0.187

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-107

Oil Seals by Model Number

MODEL NO
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94

Garlock

PART NO

SHAFT

BORE

WIDTH

27063-7527
27063-7839
27063-7842
27063-8461
27063-8768
27063-8833
27063-8978
27063-9009
27063-9013
27063-9014
27063-9016
27063-9190
27063-9489
27063-9500
27063-9501
27063-9505
27063-9507
27063-9508
27063-9509
27063-9515
27063-9517
27063-9518
27063-9524
27063-9525
27063-9527
27063-9537
27063-9722
27063-9856
27063-9965
27223-0081
27223-0089
27223-0096
27223-0139
27223-0141
27223-0181
27223-0215
27223-0287
27223-0359
27223-0592
27223-0760
27223-0940
27223-1135
27223-1261
27223-1678
27223-2261
27223-2516
27223-2545
27223-2753
27223-2756
27223-2959
27223-3409
27223-4488

1.687
3.543
3.937
1.181
4.134
0.594
0.984
0.969
2.000
2.500
4.000
3.740
0.875
0.313
0.375
0.500
0.562
0.625
0.625
0.875
0.984
1.000
1.250
1.250
1.312
2.062
1.500
0.669
1.453
0.594
0.625
0.625
0.750
0.750
0.812
0.875
1.000
1.125
1.437
1.625
1.781
1.937
2.062
2.375
3.187
3.875
0.984
4.500
4.500
5.062
6.375
4.331

2.125
4.724
5.118
1.683
5.118
1.125
1.375
1.750
2.500
3.000
4.500
4.724
1.500
0.687
0.750
1.000
1.000
1.125
1.250
1.375
2.062
1.375
1.625
1.984
1.875
2.661
2.250
1.102
1.968
1.375
1.250
1.575
1.250
1.375
1.575
1.500
1.500
2.000
2.125
2.375
2.625
3.000
3.062
3.876
4.750
5.500
1.654
5.500
5.625
6.250
7.500
6.693

0.187
0.472
0.472
0.250
0.472
0.250
0.187
0.312
0.250
0.250
0.250
0.472
0.250
0.219
0.187
0.250
0.250
0.250
0.250
0.250
0.375
0.187
0.250
0.250
0.219
0.187
0.250
0.276
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.276
0.500
0.500
0.625
0.500
0.500

MODEL NO
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94
94

PART NO

SHAFT

BORE

WIDTH

27223-4597
27223-4598
27223-4600
27223-5074
27223-5091
27223-5314
27223-5331
27223-5572
27223-5672
27223-5937
27223-6062
27223-6074
27223-6114
27223-6120
27223-6176
27223-6192
27223-6208
27223-6211
27223-6215
27223-6256
27223-6266
27223-6281
27223-6282
27223-6300
27223-6301
27223-6302
27223-6314
27223-6323
27223-6329
27223-6486
27223-6537
27223-6557
27223-6639
27223-6738
27223-7021
27223-7033
27223-7198
27223-7209
27223-7217
27223-7465
27223-7636
27223-7779
27223-8003
27223-8004
27223-8005
27223-8006
27223-8762
27223-8958
27223-8959
27223-8960
27223-9047
27223-9086

1.187
1.781
1.187
2.953
1.375
1.000
4.250
2.750
5.750
0.969
0.438
0.500
0.750
0.750
1.125
1.250
1.375
1.437
1.437
1.750
1.937
2.187
2.187
2.562
2.562
2.562
3.346
3.937
5.062
1.562
0.937
1.375
1.375
1.156
0.625
0.750
0.781
2.165
2.687
0.875
1.625
0.969
1.562
1.766
1.969
2.165
1.761
2.165
2.531
5.500
6.937
1.937

2.835
3.937
2.441
4.528
2.441
1.501
5.687
3.500
8.858
2.048
0.875
0.875
1.125
1.851
2.441
2.835
1.875
1.937
3.150
3.347
3.544
4.331
5.118
3.937
4.725
5.512
5.118
5.905
7.875
3.544
2.048
3.150
2.835
2.835
1.000
1.250
1.850
3.937
4.000
1.570
3.750
2.441
3.150
2.953
4.331
3.544
3.937
3.250
4.725
8.268
9.000
3.250

0.375
0.375
0.375
0.375
0.312
0.312
0.500
0.562
0.750
0.375
0.234
0.234
0.234
0.375
0.375
0.375
0.312
0.250
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.375
0.312
0.375
0.312
0.375
0.250
0.250
0.375
0.375
0.375
0.312
0.375
0.375
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-108

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

94
94
94
94
94
94
94
94
111
111
111
111
111
113
113
113
113
113
113
113
113
113
113
113
123
123
123
123
123
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142

27223-9274
27223-9307
27223-9372
27223-9543
27223-9622
27223-9670
27223-9967
27223-9977
21011-2542
21011-2545
21011-2568
21011-4498
21011-4559
21012-2464
21012-3355
21012-4347
21012-4495
21012-4496
21012-4557
21012-4558
21012-4560
21012-4561
21012-8800
21012-9553
21016-1210
21016-3835
21016-3885
21016-6880
21016-9736
21432-1715
21432-2015
21432-2512
21432-2986
21432-3099
21432-3545
21432-3615
21432-3628
21432-3668
21432-4453
21432-4463
21432-4483
21432-4543
21432-4547
21432-4696
21432-4716
21432-4753
21432-4829
21432-4859
21432-4896
21432-4918
21432-4928
21432-4964

1.125
7.937
4.969
4.500
3.062
2.125
1.000
2.156
4.000
4.000
4.000
40.000
5.375
3.750
6.000
29.000
10.500
12.500
3.000
3.250
6.500
7.125
3.432
9.062
2.000
35.000
1.750
24.250
31.500
12.375
17.687
15.250
12.000
14.000
7.500
9.000
9.250
10.000
38.000
7.937
8.250
24.250
32.500
29.250
17.500
15.375
36.000
21.750
37.875
29.500
29.950
40.125

2.441
10.125
6.375
7.000
4.062
3.623
1.851
4.725
5.125
5.250
6.250
42.000
6.687
4.750
7.000
30.500
12.000
14.000
4.000
4.812
7.500
8.125
4.624
10.562
3.125
37.000
3.189
25.750
33.000
13.500
19.187
16.375
13.125
15.125
8.500
10.000
10.250
11.000
40.000
8.937
9.250
25.250
34.500
30.250
18.625
16.500
38.000
23.250
39.875
31.000
30.950
42.125

WIDTH
0.281
0.500
0.500
0.531
0.375
0.375
0.250
0.375
0.625
0.625
0.563
1.000
0.562
0.625
0.500
0.750
0.625
0.625
0.500
0.500
0.500
0.500
0.484
0.750
0.375
0.875
0.500
0.750
0.750
1.250
1.000
1.250
1.312
1.375
0.750
0.750
0.750
0.750
1.250
0.750
0.750
0.750
1.500
0.750
1.250
1.250
1.500
1.000
1.250
1.000
0.750
1.500

MODEL NO

PART NO

SHAFT

BORE

142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142

21432-5113
21432-5147
21432-5218
21432-5243
21432-5272
21432-5275
21432-5422
21432-5440
21432-5471
21432-5515
21432-5521
21432-5529
21432-5566
21432-5583
21432-5588
21432-5648
21432-5762
21432-5870
21432-5871
21432-5924
21432-6430
21432-6458
21432-6514
21432-6617
21432-6722
21432-6737
21432-6796
21432-6931
21432-6996
21432-6997
21432-7222
21432-7265
21432-7422
21432-7445
21432-7479
21432-7536
21432-7552
21432-7579
21432-7584
21432-7605
21432-7607
21432-7615
21432-7681
21432-7685
21432-7706
21432-7724
21432-7729
21432-7819
21432-7885
21432-7886
21432-7918
21432-7993

45.500
18.000
32.500
49.000
28.250
30.750
67.750
24.000
55.750
37.000
47.625
75.750
31.750
37.000
31.000
55.750
39.000
24.000
29.250
47.500
15.750
24.250
41.000
44.000
36.000
18.500
22.000
10.250
37.125
41.500
36.535
30.000
24.213
12.000
41.500
16.000
44.000
34.804
34.812
40.500
18.750
18.000
25.125
26.299
20.000
23.812
13.000
35.500
22.750
16.750
35.795
47.750

47.500
19.125
34.500
50.500
29.750
32.750
69.750
25.500
56.750
39.000
49.625
77.750
33.250
38.500
33.000
57.750
41.000
25.125
30.750
49.500
16.875
25.750
43.000
46.000
38.000
19.625
23.500
11.250
39.125
43.500
38.535
32.000
25.213
13.125
43.500
17.000
46.000
35.804
35.812
42.500
20.250
19.500
26.250
27.795
21.125
24.937
14.125
37.500
23.875
17.875
37.795
49.750

WIDTH
1.500
1.250
1.250
1.000
1.000
1.250
1.250
1.000
0.750
1.250
1.500
1.250
1.000
1.000
1.250
1.250
1.250
1.250
1.000
1.375
1.250
1.000
1.500
1.500
1.250
1.250
1.000
0.750
1.250
1.250
1.375
1.250
0.750
1.375
1.500
0.750
1.375
0.750
0.750
1.500
1.000
1.000
1.250
1.000
1.250
1.250
1.250
1.500
1.375
1.312
1.500
1.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-109

Oil Seals by Model Number

MODEL NO
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142

Garlock

PART NO

SHAFT

BORE

WIDTH

21432-8106
21432-8107
21432-8113
21432-8214
21432-8277
21432-8296
21432-8297
21432-8390
21432-8395
21432-8406
21432-8414
21432-8440
21432-8547
21432-8553
21432-8556
21432-8561
21432-8566
21432-8568
21432-8621
21432-8648
21432-8651
21432-8659
21432-8672
21432-8754
21432-9183
21432-9220
21432-9229
21432-9233
21432-9235
21432-9291
21432-9292
21432-9318
21432-9319
21432-9332
21432-9336
21432-9337
21432-9343
21432-9393
21432-9498
21432-9513
21432-9514
21432-9550
21432-9552
21432-9561
21432-9570
21432-9579
21432-9605
21432-9627
21432-9638
21432-9650
21432-9683
21432-9685

13.750
12.000
32.000
28.000
27.000
13.000
11.250
25.125
43.500
34.500
9.410
18.250
25.500
9.843
16.250
28.000
25.000
48.000
9.375
24.610
31.750
54.000
51.500
32.205
26.000
31.750
49.000
52.000
51.500
71.000
63.500
26.000
27.250
59.500
24.000
36.000
47.500
24.875
24.250
88.100
93.600
31.500
22.875
18.750
30.000
47.500
58.550
63.650
39.500
41.500
37.250
23.750

14.750
13.000
34.000
30.000
28.125
14.000
12.250
26.250
45.500
36.500
10.410
19.375
27.000
10.843
17.250
29.125
26.125
50.000
10.375
26.110
33.750
56.000
53.500
34.205
27.500
33.750
51.000
54.000
53.500
73.000
65.500
27.125
28.375
61.500
25.000
36.125
49.500
26.375
25.375
89.600
95.100
33.500
24.000
20.750
31.000
49.500
60.550
65.650
41.500
43.000
38.375
24.875

0.750
0.750
1.250
1.500
1.375
0.750
0.750
1.375
1.500
1.250
0.750
1.250
1.000
0.750
0.750
1.375
1.375
1.250
0.750
1.000
1.500
1.250
1.500
1.250
1.000
1.250
1.250
1.500
1.250
1.250
1.250
1.375
1.375
1.250
0.750
1.250
1.500
1.000
1.250
1.000
1.000
1.250
1.312
0.750
0.750
1.250
1.250
1.250
1.250
1.000
1.250
1.250

MODEL NO
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

21432-9698
21432-9699
21432-9707
21432-9730
21432-9745
21432-9794
21432-9813
21432-9814
21432-9816
21432-9832
21432-9850
21432-9865
21432-9872
21432-9873
21432-9886
21432-9909
21432-9922
21432-9923
21432-9946
24132-9332
24082-5461
24801-0625
24801-0627
24801-0639
24801-0648
24801-0682
24801-0706
24801-0716
24801-0717
24801-0720
24801-0738
24801-0741
24801-0748
24801-0754
24801-0756
24801-0765
24801-0770
24801-0773
24801-0787
24801-0790
24801-0792
24801-0798
24801-0804
24801-0811
24801-0815
24801-0832
24801-0836
24801-0848
24801-0850
24801-0856
24801-0857
24801-0879

21.500
25.000
12.000
28.000
41.000
47.000
33.875
29.875
16.142
28.000
48.865
44.000
22.000
21.500
46.500
23.500
10.500
55.000
42.000
59.500
3.500
0.875
1.000
1.750
1.500
6.500
1.875
2.375
1.625
1.750
2.375
1.437
1.875
1.375
0.875
1.125
1.625
0.984
1.250
1.687
1.875
1.250
1.500
4.250
1.125
1.125
1.750
1.875
0.875
1.500
1.000
1.750

22.625
26.500
13.125
29.500
43.000
49.000
35.000
31.000
17.142
29.125
50.865
46.000
23.125
23.000
48.500
24.625
11.500
57.000
43.500
61.500
4.875
1.875
2.000
2.750
2.375
7.500
3.000
3.126
2.500
3.000
3.250
2.250
2.625
2.500
1.750
2.001
2.750
2.047
2.375
2.500
2.875
2.000
2.250
5.500
2.250
2.125
3.968
2.622
2.000
2.625
2.125
2.875

1.250
1.000
1.250
1.000
1.250
1.500
1.250
1.250
0.750
1.250
1.500
1.250
1.250
1.000
1.250
1.375
0.750
1.250
1.000
1.250
0.625
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.625
0.500
0.500
0.625
0.625
0.625
0.500
0.500
0.500
0.500
0.500
0.500

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-110

Rev. 1/01

Garlock
MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Oil Seals by Model Number

PART NO

SHAFT

BORE

WIDTH

24801-0901
24801-0909
24801-0913
24801-0930
24801-0932
24801-0951
24801-0988
24801-0989
24801-0998
24801-1008
24801-1009
24801-1017
24801-1019
24801-1026
24801-1028
24801-1041
24801-1048
24801-1051
24801-1056
24801-1059
24801-1062
24801-1072
24801-1075
24801-1078
24801-1081
24801-1082
24801-1083
24801-1084
24801-1090
24801-1092
24801-1099
24801-1116
24801-1121
24801-1122
24801-1127
24801-1129
24801-1136
24801-1138
24801-1144
24801-1147
24801-1156
24801-1166
24801-1177
24801-1205
24801-1206
24801-1211
24801-1212
24801-1214
24801-1215
24801-1220
24801-1245
24801-1251

2.750
1.750
1.378
4.000
4.125
5.125
1.125
1.875
1.750
1.375
1.000
1.375
1.334
1.750
3.250
2.750
1.250
5.000
4.000
1.875
1.750
1.875
1.875
2.953
2.875
4.331
1.000
1.181
0.875
1.375
1.500
1.438
1.375
1.181
1.968
2.562
2.313
1.375
3.938
2.750
2.500
1.500
5.625
2.875
2.000
2.375
2.500
1.500
1.250
3.000
2.250
2.562

3.875
2.625
3.465
5.248
5.500
6.250
2.000
2.625
2.875
2.250
1.875
2.836
2.363
2.500
4.000
3.543
2.125
5.750
5.250
2.875
2.625
2.812
2.750
3.937
3.750
5.511
2.000
2.875
1.750
2.125
2.378
2.250
2.250
2.362
2.952
3.437
3.355
2.835
4.938
3.755
3.550
2.625
6.624
4.003
3.000
3.500
3.375
2.375
2.000
4.000
3.375
3.562

0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.500
0.500
0.500
0.500
0.625
0.625
0.500
0.500
0.500
0.438
0.500
0.625
0.500
0.625
0.500
0.625
0.625
0.625
0.500
0.625
0.625
0.500
0.625
0.625
0.500
0.500
0.500
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24801-1252
24801-1265
24801-1268
24801-1270
24801-1322
24801-1323
24801-1335
24801-1341
24801-1346
24801-1349
24801-1350
24801-1351
24801-1357
24801-1374
24801-1403
24801-1404
24801-1406
24801-1411
24801-1420
24801-1473
24801-1476
24801-1479
24801-1482
24801-1483
24801-1493
24801-1494
24801-1552
24801-1557
24801-1581
24801-1641
24801-1644
24801-1654
24801-1744
24801-1747
24801-1748
24801-1751
24801-1754
24801-1759
24801-1763
24801-1765
24801-1784
24801-1788
24801-1809
24801-1818
24801-1823
24801-1841
24801-1854
24801-1862
24801-1864
24801-1870
24801-1876
24801-1884

2.500
3.000
2.875
1.625
2.125
2.125
2.125
1.688
3.937
5.905
2.000
2.313
1.000
1.772
0.875
2.188
2.000
1.334
1.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.312
2.327
2.375
2.438
2.375
2.375
1.750
2.598
1.625
3.625
1.000
3.187
1.500
0.875
1.771
2.500
2.500
2.500
2.500
2.625
2.125
1.937
5.375
2.362
2.362
2.165

3.623
3.750
3.875
2.437
2.875
3.000
3.125
2.750
5.118
7.087
3.000
3.313
2.125
2.638
1.937
3.000
2.875
2.363
2.250
2.995
3.000
3.000
3.125
3.125
3.250
3.250
3.250
3.250
3.250
3.438
3.125
3.375
2.750
3.386
2.437
4.499
1.875
4.499
2.250
2.000
2.521
3.375
3.250
3.500
3.540
3.625
3.250
2.750
6.375
3.543
3.228
3.165

0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.500
0.625
0.625
0.625
0.625
0.500
0.625
0.500
0.625
0.625
0.500
0.500
0.500
0.625
0.625
0.500
0.625
0.625
0.500
0.500
0.468
0.625
0.468
0.625
0.625
0.500
0.500
0.500
0.625
0.500
0.625
0.625
0.625
0.750
0.500
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-111

Oil Seals by Model Number

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Garlock

PART NO

SHAFT

BORE

WIDTH

24801-1887
24801-1893
24801-1901
24801-1908
24801-1911
24801-1915
24801-1920
24801-1932
24801-1941
24801-1950
24801-1951
24801-1962
24801-1974
24801-1978
24801-1984
24801-1985
24801-1988
24801-2001
24801-2014
24801-2037
24801-2038
24801-2042
24801-2062
24801-2067
24801-2078
24801-2086
24801-2087
24801-2127
24801-2141
24801-2145
24801-2159
24801-2166
24801-2167
24801-2172
24801-2173
24801-2175
24801-2177
24801-2222
24801-2230
24801-2239
24801-2240
24801-2250
24801-2260
24801-2264
24801-2272
24801-2280
24801-2291
24801-2311
24801-2321
24801-2322
24801-2326
24801-2335

2.562
2.625
2.250
2.938
3.347
1.625
1.125
1.250
2.625
2.625
2.500
2.625
1.570
0.984
2.677
2.283
3.307
2.000
2.625
2.750
1.932
4.313
2.750
2.756
2.756
2.875
2.756
1.654
4.563
2.937
2.938
2.953
2.937
3.000
3.000
3.000
3.000
3.125
3.937
3.150
3.150
2.756
1.378
2.750
3.150
3.250
4.500
3.346
3.375
3.375
3.375
3.438

3.502
3.500
3.189
3.688
4.500
2.375
2.062
2.125
3.500
3.750
3.625
3.375
3.188
1.968
3.543
3.150
4.331
3.125
3.628
3.500
2.750
5.313
3.875
3.543
3.622
3.625
3.937
2.598
5.751
3.688
3.938
3.937
4.000
3.875
3.875
4.000
4.125
4.000
4.921
4.528
3.937
3.937
2.165
3.625
4.134
4.250
6.250
4.528
4.375
4.375
4.500
4.625

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.500
0.625
0.625
0.625
0.709
0.500
0.500
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.500
0.500
0.625
0.500
0.625
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.750
0.500
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.630
0.500
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24801-2348
24801-2366
24801-2368
24801-2374
24801-2378
24801-2419
24801-2438
24801-2462
24801-2474
24801-2488
24801-2489
24801-2506
24801-2510
24801-2533
24801-2549
24801-2577
24801-2593
24801-2604
24801-2611
24801-2625
24801-2631
24801-2659
24801-2672
24801-2676
24801-2694
24801-2698
24801-2720
24801-2723
24801-2753
24801-2755
24801-2759
24801-2761
24801-2766
24801-2780
24801-2808
24801-2851
24801-2874
24801-2875
24801-2885
24801-2894
24801-2902
24801-2918
24801-2919
24801-2923
24801-2930
24801-2931
24801-2948
24801-2962
24801-2969
24801-2987
24801-3021
24801-3061

3.438
3.500
3.500
3.500
3.500
3.625
4.125
3.750
2.188
2.362
2.186
3.875
4.750
3.938
4.000
3.438
4.000
4.125
1.654
4.134
1.575
4.250
4.250
2.813
1.375
1.235
1.437
1.688
4.500
4.500
4.500
4.500
5.188
4.528
4.625
4.750
4.250
4.875
4.437
4.937
3.543
1.654
2.756
5.000
4.921
4.750
4.560
3.937
1.969
1.625
3.740
2.500

4.625
4.500
4.500
4.750
4.375
4.625
5.131
4.750
3.250
3.543
3.186
5.000
5.756
4.875
5.500
4.438
5.000
5.125
2.559
5.118
3.150
5.250
5.875
3.751
2.437
2.000
2.437
2.688
5.500
5.500
5.750
5.750
6.188
5.512
5.625
6.250
5.375
6.000
5.500
6.000
4.724
2.441
3.543
6.250
6.890
5.750
6.125
5.000
3.189
2.500
4.724
3.725

0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-112

Rev. 1/01

Garlock
MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Oil Seals by Model Number

PART NO

SHAFT

BORE

24801-3063
24801-3071
24801-3143
24801-3161
24801-3164
24801-3165
24801-3184
24801-3223
24801-3225
24801-3239
24801-3241
24801-3247
24801-3263
24801-3267
24801-3270
24801-3357
24801-3366
24801-3398
24801-3430
24801-3455
24801-3464
24801-3474
24801-3491
24801-3506
24801-3518
24801-3584
24801-3588
24801-3593
24801-3596
24801-3628
24801-3632
24801-3642
24801-3679
24801-3785
24801-3790
24801-3796
24801-3830
24801-3913
24801-3915
24801-3964
24801-3971
24801-4195
24801-4444
24801-4461
24801-4563
24801-4568
24801-4631
24801-4639
24801-4651
24801-4682
24801-4741
24801-4947

5.250
1.719
1.838
3.346
4.810
4.788
5.500
2.160
1.969
2.312
1.573
2.187
0.945
2.312
1.750
6.000
2.250
1.000
6.500
2.438
6.750
3.937
2.438
1.875
7.250
3.346
7.875
3.150
8.000
1.575
0.937
3.000
10.500
5.000
4.935
1.063
3.937
6.299
1.575
0.750
1.500
2.520
2.158
3.250
0.984
0.512
2.500
1.375
4.000
4.705
2.850
1.969

6.256
2.625
2.750
4.331
6.000
6.000
6.750
3.250
2.756
3.062
3.250
3.062
1.732
3.750
3.750
7.000
3.625
1.750
7.750
3.431
8.250
5.250
3.500
2.758
8.250
4.528
9.375
4.331
9.250
2.500
1.837
3.937
11.750
6.375
6.000
1.938
4.875
7.480
3.425
1.575
3.045
4.250
3.150
4.999
1.850
1.606
4.250
2.828
5.000
5.750
3.650
2.835

WIDTH
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.551
0.625
0.625
0.625
0.625
0.625
0.625
0.875
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24801-5047
24801-5048
24801-5088
24801-5089
24801-5140
24801-5164
24801-5223
24801-5269
24801-5309
24801-5325
24801-5416
24801-5431
24801-5446
24801-5488
24801-5521
24801-5593
24801-5732
24801-5785
24801-5792
24801-7682
24801-9724
24802-0706
24802-0709
24802-0748
24802-0754
24802-0765
24802-0770
24802-0787
24802-0792
24802-0811
24802-0815
24802-0819
24802-0832
24802-0879
24802-0988
24802-0989
24802-0990
24802-0991
24802-0997
24802-0998
24802-1010
24802-1012
24802-1024
24802-1026
24802-1028
24802-1062
24802-1075
24802-1080
24802-1081
24802-1082
24802-1083
24802-1086

3.188
4.375
5.315
4.921
5.512
4.591
0.748
3.150
4.133
0.787
0.669
2.362
1.181
2.441
3.346
0.984
2.250
2.500
5.250
3.125
3.000
1.875
2.125
1.875
1.375
1.125
1.625
1.250
1.875
4.250
1.125
1.875
1.125
1.750
1.125
1.875
1.750
2.500
2.937
1.750
2.125
0.875
6.000
1.750
3.250
1.750
1.875
3.625
2.875
4.331
1.000
2.625

4.249
5.500
6.496
6.102
6.496
5.508
1.496
5.118
5.511
1.654
1.575
3.150
2.030
3.346
4.724
1.969
3.312
3.438
6.250
4.250
4.250
3.000
2.875
2.625
2.500
2.001
2.750
2.375
2.875
5.500
2.250
3.125
2.125
2.875
2.001
2.625
2.625
3.251
4.003
2.875
3.189
1.625
7.500
2.500
4.000
2.625
2.750
4.375
3.750
5.512
2.000
3.677

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.500
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.500
0.625
0.625
0.562
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-113

Oil Seals by Model Number

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Garlock

PART NO

SHAFT

BORE

WIDTH

24802-1087
24802-1089
24802-1090
24802-1091
24802-1092
24802-1095
24802-1098
24802-1100
24802-1101
24802-1105
24802-1110
24802-1115
24802-1116
24802-1118
24802-1119
24802-1121
24802-1123
24802-1138
24802-1139
24802-1141
24802-1142
24802-1144
24802-1152
24802-1162
24802-1166
24802-1174
24802-1176
24802-1180
24802-1183
24802-1185
24802-1186
24802-1194
24802-1197
24802-1199
24802-1203
24802-1205
24802-1207
24802-1209
24802-1211
24802-1212
24802-1214
24802-1215
24802-1216
24802-1220
24802-1225
24802-1237
24802-1238
24802-1239
24802-1242
24802-1245
24802-1248
24802-1249

2.625
1.625
0.875
1.125
1.375
3.750
2.562
1.427
1.375
1.375
1.062
0.937
1.437
1.500
2.188
1.375
1.938
1.375
1.465
1.938
2.938
3.938
1.125
2.625
1.500
3.562
2.062
2.250
9.750
6.500
1.562
1.500
1.968
1.181
2.625
2.875
3.125
3.313
2.375
2.500
1.500
1.250
3.000
3.000
2.062
3.250
2.750
7.250
2.750
2.250
2.125
2.000

3.688
2.625
1.750
3.150
2.125
5.250
3.437
2.500
2.375
3.125
1.812
1.687
2.250
2.125
3.000
2.250
3.000
2.835
2.343
2.812
3.812
4.937
1.876
3.750
2.625
4.751
2.996
3.187
11.250
8.000
2.625
2.499
2.953
2.358
3.489
4.003
4.130
4.130
3.500
3.375
2.375
2.000
3.881
4.000
3.000
4.003
3.500
8.750
3.543
3.375
3.520
2.750

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
1.000
1.000
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24802-1250
24802-1251
24802-1265
24802-1267
24802-1268
24802-1270
24802-1322
24802-1323
24802-1328
24802-1340
24802-1341
24802-1346
24802-1347
24802-1348
24802-1349
24802-1350
24802-1351
24802-1353
24802-1357
24802-1398
24802-1403
24802-1405
24802-1406
24802-1411
24802-1420
24802-1479
24802-1483
24802-1493
24802-1494
24802-1498
24802-1499
24802-1552
24802-1581
24802-1641
24802-1645
24802-1654
24802-1739
24802-1740
24802-1743
24802-1744
24802-1752
24802-1754
24802-1755
24802-1760
24802-1761
24802-1763
24802-1764
24802-1765
24802-1766
24802-1768
24802-1776
24802-1779

2.750
2.562
3.000
1.570
2.875
1.625
2.125
2.125
0.624
2.165
1.688
3.937
3.937
2.362
5.906
2.000
2.313
2.187
1.000
1.873
0.875
0.750
2.000
1.334
1.250
2.250
2.250
2.250
2.250
2.250
1.181
2.313
2.375
2.437
2.375
2.375
3.149
2.628
1.938
1.750
1.378
1.000
2.250
1.968
2.125
1.500
6.250
0.875
2.313
4.188
2.375
1.560

3.750
3.562
3.750
2.338
3.875
2.438
2.875
3.000
1.374
3.000
2.750
5.118
4.724
3.150
7.087
3.000
3.313
3.189
2.125
2.812
1.937
1.499
2.875
2.363
2.250
3.000
3.125
3.250
3.250
3.350
2.211
3.250
3.250
3.437
3.125
3.375
3.942
3.750
2.875
2.750
2.362
1.875
3.500
2.875
3.125
2.250
7.125
2.000
3.250
5.004
3.350
2.590

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-114

Rev. 1/01

Garlock
MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Oil Seals by Model Number

PART NO

SHAFT

BORE

WIDTH

24802-1803
24802-1804
24802-1805
24802-1806
24802-1807
24802-1810
24802-1811
24802-1813
24802-1814
24802-1815
24802-1816
24802-1817
24802-1818
24802-1834
24802-1840
24802-1841
24802-1849
24802-1850
24802-1854
24802-1858
24802-1862
24802-1872
24802-1874
24802-1876
24802-1878
24802-1882
24802-1883
24802-1884
24802-1887
24802-1891
24802-1893
24802-1898
24802-1901
24802-1906
24802-1915
24802-1929
24802-1932
24802-1935
24802-1942
24802-1943
24802-1951
24802-1958
24802-1960
24802-1961
24802-1962
24802-1975
24802-1980
24802-1981
24802-1982
24802-1988
24802-2001
24802-2003

1.574
1.771
2.165
2.362
2.559
2.755
2.952
3.149
3.346
3.543
3.740
4.330
2.500
2.500
4.443
2.625
2.125
1.187
2.125
2.559
1.937
1.500
1.500
2.362
2.875
3.500
2.559
2.165
2.563
1.875
2.625
1.781
2.250
2.165
1.625
1.375
1.250
1.890
2.438
2.356
2.500
1.438
4.187
3.875
2.625
1.969
2.937
2.244
2.812
3.307
2.000
2.687

2.575
2.996
3.189
3.362
3.500
3.750
4.000
4.500
4.375
4.500
4.750
5.250
3.500
4.375
5.500
3.625
3.050
2.441
3.250
3.465
2.750
2.460
2.410
3.228
4.380
4.625
3.543
3.165
3.512
2.997
3.500
3.125
3.189
3.543
2.375
2.439
2.125
2.756
3.250
3.625
3.625
2.375
5.875
5.500
3.375
3.150
3.750
3.268
3.580
4.331
3.125
3.500

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24802-2005
24802-2010
24802-2016
24802-2028
24802-2038
24802-2046
24802-2048
24802-2050
24802-2051
24802-2059
24802-2062
24802-2083
24802-2086
24802-2091
24802-2106
24802-2107
24802-2108
24802-2115
24802-2160
24802-2166
24802-2171
24802-2172
24802-2179
24802-2195
24802-2201
24802-2209
24802-2210
24802-2223
24802-2224
24802-2230
24802-2240
24802-2250
24802-2260
24802-2261
24802-2264
24802-2270
24802-2280
24802-2286
24802-2288
24802-2292
24802-2296
24802-2304
24802-2312
24802-2316
24802-2322
24802-2326
24802-2332
24802-2335
24802-2368
24802-2374
24802-2378
24802-2419

2.165
2.717
2.500
0.807
1.932
3.938
4.875
4.375
4.563
2.756
2.750
2.938
2.875
3.000
4.187
1.437
1.937
2.062
1.000
2.953
3.000
3.000
3.000
1.250
3.062
3.122
3.750
3.125
3.125
3.937
3.150
2.756
1.378
3.526
2.750
5.250
3.250
3.250
1.475
1.766
3.313
3.313
2.280
3.375
3.375
3.375
3.408
3.438
3.500
3.500
3.500
3.625

3.150
3.752
3.189
2.165
2.750
5.501
5.875
5.375
5.563
3.543
3.875
3.938
3.625
4.500
5.500
2.500
3.125
3.125
2.441
3.937
4.008
3.875
4.125
2.875
4.062
4.000
4.500
4.125
4.375
4.921
3.937
3.937
2.165
4.526
3.625
6.250
4.250
4.375
2.335
2.750
4.125
4.500
3.280
4.250
4.375
4.500
4.500
4.626
4.500
4.750
4.375
4.625

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-115

Oil Seals by Model Number

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Garlock

PART NO

SHAFT

BORE

WIDTH

24802-2464
24802-2474
24802-2476
24802-2480
24802-2483
24802-2489
24802-2492
24802-2503
24802-2506
24802-2520
24802-2523
24802-2527
24802-2539
24802-2542
24802-2577
24802-2593
24802-2604
24802-2605
24802-2616
24802-2618
24802-2622
24802-2623
24802-2625
24802-2629
24802-2632
24802-2634
24802-2635
24802-2643
24802-2651
24802-2659
24802-2662
24802-2689
24802-2694
24802-2698
24802-2700
24802-2711
24802-2730
24802-2733
24802-2735
24802-2736
24802-2740
24802-2744
24802-2747
24802-2755
24802-2780
24802-2808
24802-2816
24802-2843
24802-2857
24802-2859
24802-2874
24802-2875

3.750
3.188
1.181
1.968
3.750
2.186
3.000
3.875
3.875
2.625
3.346
3.360
4.938
4.000
3.438
4.000
4.125
4.125
4.125
2.350
1.375
4.188
4.134
4.134
2.312
2.750
2.656
3.075
2.362
4.250
2.500
4.313
1.375
1.235
4.313
0.875
1.938
4.437
2.063
2.687
4.450
3.688
4.188
4.500
4.527
4.625
2.559
2.875
1.185
1.125
4.250
4.875

4.750
3.250
2.350
2.935
5.000
3.186
4.617
4.875
5.000
3.371
4.134
5.000
5.938
5.125
4.438
5.000
5.125
5.250
5.750
3.350
2.875
5.256
5.118
5.134
3.500
4.125
4.003
4.325
3.346
5.250
3.543
5.750
2.437
2.000
5.500
1.875
2.938
5.500
3.063
3.687
5.325
4.688
5.188
5.500
5.512
5.625
3.346
4.000
2.442
2.441
5.375
6.000

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.562
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24802-2885
24802-2891
24802-2896
24802-2897
24802-2902
24802-2904
24802-2917
24802-2920
24802-2923
24802-2924
24802-2931
24802-2942
24802-2944
24802-2949
24802-2950
24802-2951
24802-2957
24802-2963
24802-2971
24802-2972
24802-2974
24802-2986
24802-2987
24802-2998
24802-2999
24802-3002
24802-3004
24802-3005
24802-3006
24802-3007
24802-3009
24802-3012
24802-3015
24802-3016
24802-3017
24802-3018
24802-3021
24802-3022
24802-3023
24802-3024
24802-3025
24802-3029
24802-3038
24802-3039
24802-3045
24802-3048
24802-3052
24802-3054
24802-3055
24802-3056
24802-3057
24802-3058

4.437
3.937
4.937
2.264
3.543
5.438
5.000
1.908
5.000
5.000
4.750
3.937
3.450
4.599
3.006
2.357
2.750
4.438
1.571
3.740
4.331
5.088
1.625
5.125
2.125
1.437
2.500
3.187
2.375
2.500
3.250
2.755
2.174
2.569
3.201
3.948
3.740
5.118
2.688
3.071
2.283
1.562
4.255
3.786
3.346
1.500
2.160
2.153
2.436
2.222
5.250
2.125

5.500
4.900
6.000
3.250
4.724
6.688
6.000
2.875
6.250
6.256
5.750
4.883
4.500
5.599
4.006
3.357
4.000
5.750
2.571
5.118
5.331
6.088
2.500
6.375
3.312
2.310
3.433
4.312
3.437
3.562
4.313
3.755
3.174
3.569
4.201
4.948
4.724
6.299
3.543
3.937
3.543
2.500
5.255
4.786
4.321
2.563
3.160
3.153
3.436
3.222
6.000
3.500

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-116

Rev. 1/01

Garlock
MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Oil Seals by Model Number

PART NO

SHAFT

BORE

WIDTH

24802-3062
24802-3064
24802-3067
24802-3072
24802-3073
24802-3083
24802-3086
24802-3087
24802-3088
24802-3093
24802-3094
24802-3095
24802-3096
24802-3099
24802-3101
24802-3104
24802-3105
24802-3107
24802-3108
24802-3109
24802-3137
24802-3138
24802-3139
24802-3153
24802-3154
24802-3161
24802-3162
24802-3168
24802-3169
24802-3170
24802-3174
24802-3179
24802-3180
24802-3184
24802-3185
24802-3210
24802-3221
24802-3224
24802-3234
24802-3236
24802-3240
24802-3244
24802-3251
24802-3257
24802-3263
24802-3264
24802-3265
24802-3266
24802-3268
24802-3277
24802-3282
24802-3284

4.680
2.380
5.250
3.735
5.250
2.060
2.933
1.378
0.866
2.875
4.335
5.115
3.015
2.505
3.385
3.900
4.540
2.755
2.402
3.228
2.900
3.010
3.335
2.230
2.440
3.346
5.315
4.565
2.150
2.560
2.750
4.725
6.693
5.500
3.815
4.230
2.998
4.245
2.550
5.625
3.562
2.562
4.425
1.750
0.945
1.886
3.543
1.967
1.562
5.750
4.245
1.493

6.000
3.380
6.500
4.735
6.750
3.060
3.750
3.150
1.969
4.625
5.335
6.115
4.015
3.505
4.385
4.900
6.150
3.741
3.290
4.448
3.900
4.010
4.335
3.230
3.440
4.330
6.693
5.565
3.150
3.560
4.375
5.905
7.874
6.750
4.815
5.230
3.998
5.245
3.550
6.875
4.500
4.125
5.626
2.716
1.732
2.886
4.331
2.967
2.437
6.750
5.626
2.493

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24802-3290
24802-3294
24802-3299
24802-3309
24802-3316
24802-3318
24802-3321
24802-3334
24802-3344
24802-3349
24802-3357
24802-3366
24802-3380
24802-3381
24802-3388
24802-3398
24802-3424
24802-3474
24802-3480
24802-3491
24802-3493
24802-3498
24802-3506
24802-3513
24802-3514
24802-3519
24802-3524
24802-3540
24802-3541
24802-3552
24802-3560
24802-3568
24802-3570
24802-3576
24802-3577
24802-3582
24802-3593
24802-3600
24802-3646
24802-3650
24802-3727
24802-3728
24802-3735
24802-3736
24802-3745
24802-3753
24802-3772
24802-3777
24802-3785
24802-3962
24802-3966
24802-3975

1.932
2.438
3.345
2.362
2.953
4.331
1.625
3.402
3.438
2.000
6.000
2.250
2.437
2.750
1.181
1.000
6.437
3.938
2.312
2.438
2.932
1.574
1.875
2.932
2.650
2.950
1.980
2.360
2.000
7.500
2.000
2.480
3.000
1.625
2.307
2.312
3.150
1.969
3.375
2.625
5.181
5.512
2.559
2.950
1.889
3.437
1.161
3.188
5.000
3.185
3.312
1.750

2.932
3.350
4.304
3.346
3.740
5.118
2.374
4.375
4.313
3.000
7.000
3.625
4.509
4.533
2.181
1.750
7.687
5.251
3.371
3.500
3.806
3.937
2.758
3.932
3.630
3.960
2.875
4.090
2.884
9.000
2.855
3.543
4.003
2.800
4.331
3.438
4.331
3.543
5.290
3.683
6.118
6.512
3.620
4.250
2.889
5.125
2.000
5.000
6.375
4.185
4.375
3.125

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-117

Oil Seals by Model Number

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Garlock

PART NO

SHAFT

BORE

WIDTH

24802-3983
24802-3986
24802-3989
24802-4057
24802-4084
24802-4085
24802-4091
24802-4096
24802-4102
24802-4103
24802-4201
24802-4202
24802-4341
24802-4342
24802-4346
24802-4358
24802-4390
24802-4392
24802-4415
24802-4442
24802-4447
24802-4456
24802-4469
24802-4482
24802-4521
24802-4563
24802-4568
24802-4596
24802-4597
24802-4607
24802-4653
24802-4660
24802-4685
24802-4696
24802-4697
24802-4743
24802-4896
24802-4935
24802-4943
24802-5047
24802-5069
24802-5095
24802-5096
24802-5110
24802-5309
24802-5360
24802-5368
24802-5369
24802-5371
24802-5382
24802-5434
24802-5434

3.934
2.428
2.756
2.062
1.428
2.375
3.938
1.378
1.496
2.065
2.205
1.562
1.772
1.177
1.500
2.437
4.250
2.312
1.125
2.244
2.166
1.437
2.726
2.187
1.932
0.984
0.512
0.787
2.433
6.750
1.188
2.047
1.469
3.777
3.934
4.438
2.435
1.496
1.890
3.188
2.875
2.756
2.000
3.346
4.133
1.625
2.125
2.125
1.125
3.544
1.187
1.187

4.934
3.428
4.331
3.625
2.375
3.875
5.315
2.545
2.496
3.065
3.150
2.750
2.441
2.500
2.545
3.481
5.625
3.625
2.188
3.250
3.937
2.125
3.726
5.125
2.806
1.850
1.606
1.575
4.049
8.750
2.358
2.953
2.375
4.732
5.120
5.890
4.094
2.441
2.835
4.249
4.375
3.622
3.500
5.118
5.511
2.125
3.875
4.000
2.043
4.565
2.437
2.437

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.875
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

PART NO

SHAFT

BORE

WIDTH

24802-5448
24802-5448
24802-5449
24802-5449
24802-5461
24802-5490
24802-5494
24802-5510
24802-5573
24802-5593
24802-5625
24802-5917
24807-1025
24807-1352
24807-1359
24807-1361
24807-1363
24807-1780
24807-1782
24807-1783
24807-1786
24807-1802
24807-1846
24807-1876
24807-1888
24807-1903
24807-1905
24807-1912
24807-1923
24807-1955
24807-1970
24807-2025
24807-2045
24807-2124
24807-2138
24807-2153
24807-2155
24807-2164
24807-2165
24807-2200
24807-2287
24807-2329
24807-2336
24807-2485
24807-2495
24807-2512
24807-2522
24807-2524
24807-2537
24807-2563
24807-2567
24807-2578

1.654
1.654
3.562
3.562
3.500
2.375
1.725
4.646
1.125
0.984
7.087
1.378
1.156
1.125
1.575
2.000
0.969
1.750
1.250
1.438
0.750
2.250
1.969
2.360
1.438
1.781
0.787
2.438
1.772
0.875
1.375
2.500
3.000
0.375
2.937
2.937
1.969
1.625
2.998
1.750
4.125
1.062
2.000
2.165
1.932
1.375
1.688
1.313
2.147
0.937
2.250
1.500

4.193
4.193
4.625
4.625
4.875
3.365
2.625
5.906
2.437
1.969
8.465
2.441
1.875
1.624
2.047
2.710
1.499
2.437
1.750
1.938
1.379
2.750
2.677
3.228
2.125
2.500
1.260
3.125
2.441
1.500
2.000
3.189
3.500
0.875
3.623
3.625
2.638
2.250
3.515
2.375
4.750
1.656
2.500
2.874
2.625
1.874
2.125
2.000
2.875
1.500
2.625
2.000

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-118

Rev. 1/01

Garlock
MODEL NO
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ

Oil Seals by Model Number

PART NO

SHAFT

BORE

WIDTH

24807-2667
24807-2675
24807-2681
24807-2688
24807-2692
24807-2693
24807-2695
24807-2806
24807-2828
24807-2829
24807-2830
24807-2831
24807-2839
24807-2842
24807-2846
24807-2852
24807-2855
24807-2858
24807-2861
24807-2866
24807-2874
24807-2882
24807-2968
24807-2973
24807-2993
24807-2994
24807-2996
24807-3000
24807-3084
24807-3110
24807-3144
24807-3149
24807-3159
24807-3196
24807-3198
24807-3229
24807-3237
24807-3238
24807-3242
24807-3249
24807-3271
24807-3297
24807-3298
24807-3312
24807-3315
24807-3319
24807-3343
24807-3410
24807-3413
24807-3431
24807-3495
24807-3504

2.250
2.165
1.890
1.000
1.375
1.750
1.000
1.181
0.625
1.125
2.750
2.375
1.496
1.103
3.312
1.125
3.250
1.375
0.875
2.155
2.359
1.938
1.125
3.380
0.875
1.125
1.250
3.937
1.610
1.438
1.468
1.772
1.687
0.875
2.375
1.969
2.312
2.125
0.438
2.188
3.937
2.000
2.250
2.953
4.331
1.875
1.875
1.500
1.938
1.969
1.687
2.932

2.875
2.756
2.559
1.500
2.062
2.500
1.750
1.625
1.250
1.625
3.560
3.125
2.165
1.850
4.125
1.562
4.000
2.125
1.625
2.875
2.734
2.438
1.875
4.000
1.375
1.750
1.875
4.937
2.000
2.062
2.343
2.362
2.375
1.250
3.062
2.756
3.062
2.763
1.124
3.062
4.562
2.690
3.000
3.740
5.118
2.562
2.625
2.125
2.500
2.559
2.062
3.806

0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690

MODEL NO

PART NO

SHAFT

BORE

WIDTH

EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQ
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB

24807-3505
24807-3533
24807-3557
24807-3565
24807-3622
24807-3638
24807-3639
24807-3645
24807-3657
24807-3674
24807-3700
24807-3739
24807-3748
24807-3752
24807-3767
24807-3778
24807-3779
24807-3781
24807-3782
24807-3784
24807-3831
24807-3835
24807-3877
24807-3878
24807-3907
24807-3912
24807-3952
24807-4078
24807-4079
24807-4132
24807-4200
24807-4471
24807-4523
24807-4579
24807-4652
24807-4677
24807-4713
24807-4851
24807-5104
24807-5379
24807-5590
24807-5752
24807-5796
24807-5797
24807-5809
24816-2564
24816-3982
24816-4446
24816-7004
24816-7005
24816-7006
24816-7007

2.165
1.250
3.937
1.875
1.250
1.181
2.362
2.312
2.283
3.150
1.500
1.750
2.438
3.876
3.375
2.250
2.750
3.750
4.500
1.720
2.622
2.622
1.125
2.145
1.063
1.875
1.750
1.375
1.625
2.530
2.205
4.003
3.750
1.562
4.938
2.000
2.047
2.000
3.346
0.984
2.188
0.984
1.062
1.156
2.500
2.438
1.438
1.750
2.438
3.062
4.187
4.875

2.952
2.250
4.687
2.500
1.687
1.850
3.150
3.187
3.835
3.937
2.250
2.625
2.938
4.313
4.125
3.190
3.500
4.750
5.500
2.250
3.046
3.346
1.801
2.865
1.624
2.375
2.250
1.750
2.125
3.287
2.837
4.500
4.375
2.375
5.500
2.716
2.750
2.670
3.937
1.750
2.837
1.496
1.500
2.000
3.000
3.187
2.063
2.776
3.192
3.810
5.243
5.983

0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
0.690
1.125
0.875
0.750
1.062
1.062
1.375
1.375

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-119

Oil Seals by Model Number

MODEL NO
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB
EQSPB

Garlock

PART NO

SHAFT

BORE

WIDTH

24816-7010
24816-7014
24816-7015
24816-7017
24816-7018
24816-7019
24816-7020
24816-7021
24816-7022
24816-7023
24816-7024
24816-7025
24816-7026
24816-7027
24816-7028
24816-7029
24816-7030
24816-7031
24816-7032
24816-7033
24816-7035
24816-7036
24816-7039
24816-7040
24816-7041
24816-7042
24816-7043
24816-7044
24816-7047
24816-7048
24816-7049
24816-7050
24816-7052
24816-7054
24816-7055
24816-7056
24816-7057
24816-7058
24816-7060
24816-7061
24816-7062
24816-7063
24816-7064
24816-7065
24816-7067
24816-7068
24816-7111
24816-7118
24816-7119
24816-7120
24816-7124
24816-7131

3.000
6.062
7.000
2.938
3.938
1.937
2.188
2.688
2.937
3.000
4.125
3.438
3.938
4.187
4.437
4.937
5.000
3.937
2.812
3.438
2.500
3.500
6.625
6.000
1.937
2.750
6.437
3.812
3.938
3.937
5.438
3.250
8.937
6.625
5.750
3.875
3.938
2.362
2.937
1.378
1.378
1.772
1.772
2.165
1.438
6.000
7.437
5.875
3.188
7.437
1.438
3.188

3.825
7.349
8.375
3.956
4.986
2.567
2.825
3.574
3.817
3.818
5.025
4.458
4.957
5.230
5.548
5.982
5.982
5.328
3.569
4.338
3.192
4.458
8.390
7.340
2.563
3.772
7.780
4.773
5.643
4.955
6.750
4.335
10.443
7.718
6.938
5.085
5.085
3.366
4.480
2.146
2.539
2.539
2.972
2.972
2.063
7.343
8.945
6.938
4.335
8.945
2.063
4.335

1.062
1.375
1.375
1.375
1.375
0.876
1.125
1.062
1.062
1.375
1.375
1.312
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.062
1.312
1.375
1.375
0.875
1.000
1.375
1.375
1.125
1.252
1.250
1.312
1.562
1.250
1.250
1.375
1.375
0.750
1.062
0.748
0.748
0.748
0.748
0.748
0.975
1.375
1.375
1.523
1.298
1.540
0.609
1.312

MODEL NO
EQSPB
EQSPB
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

PART NO

SHAFT

BORE

WIDTH

24816-7132
24816-7147
29500-2175
29500-3349
29500-3370
29500-3462
29500-3465
29500-3467
29500-3501
29500-3553
29500-3585
29500-3589
29500-4107
29500-4109
29500-4110
29500-4111
29500-4112
29500-4113
29500-4115
29500-4116
29500-4124
29500-4140
29500-4141
29500-4143
29500-4144
29500-4145
29500-4146
29500-4148
29500-4149
29500-4150
29500-4152
29500-4154
29500-4156
29500-4158
29500-4160
29500-4163
29500-4174
29500-4181
29500-4193
29500-4212
29500-4214
29500-4280
29500-4292
29500-4310
29500-4312
29500-4331
29500-4361
29500-4366
29500-4374
29500-4379
29500-4391
29500-4425

7.188
3.437
3.000
2.000
6.000
6.750
6.750
6.750
7.000
7.500
1.875
7.875
1.750
2.125
1.875
2.500
2.375
3.313
4.313
4.125
1.875
1.250
1.375
1.500
1.625
1.750
2.125
2.250
2.375
2.500
2.750
3.250
3.500
3.750
4.000
4.250
5.750
1.125
3.346
4.500
3.500
2.438
3.937
6.125
6.250
2.875
3.000
4.188
2.500
3.375
4.500
3.250

8.570
4.523
4.000
3.000
7.500
8.125
8.250
8.000
8.500
9.000
2.875
9.375
2.875
2.875
2.750
3.250
3.250
4.125
5.500
5.250
2.625
2.250
2.375
2.500
2.625
2.750
3.125
3.250
3.375
3.500
3.750
4.250
4.500
4.750
5.000
5.250
6.750
2.441
4.331
6.000
4.375
3.438
4.937
7.125
7.250
4.000
4.125
5.250
3.750
4.500
5.750
4.500

0.980
1.312
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-120

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29500-4464
29500-4472
29500-4476
29500-4480
29500-4485
29500-4495
29500-4497
29500-4502
29500-4504
29500-4506
29500-4507
29500-4538
29500-4542
29500-4559
29500-4560
29500-4562
29500-4571
29500-4592
29500-4619
29500-4640
29500-4641
29500-4647
29500-4648
29500-4649
29500-4656
29500-4675
29500-4678
29500-4683
29500-4694
29500-4704
29500-4709
29500-4721
29500-4744
29500-4747
29500-4748
29500-4750
29500-4751
29500-4756
29500-4758
29500-4816
29500-4820
29500-4822
29500-4830
29500-4831
29500-4834
29500-4835
29500-4841
29500-4842
29500-4844
29500-4845
29500-4861
29500-4865

4.284
4.938
2.441
4.250
2.188
4.437
4.166
1.100
5.438
3.740
3.000
1.188
6.375
1.188
1.812
3.688
1.875
2.500
2.375
3.937
3.937
4.938
2.937
3.937
1.770
2.990
1.771
2.500
2.875
1.875
3.000
2.559
2.165
2.520
3.386
3.386
3.740
7.480
3.543
3.346
1.000
2.953
5.625
5.906
2.812
4.213
4.449
4.429
3.543
3.938
2.312
6.250

5.284
6.000
3.948
5.500
5.125
5.500
5.500
2.625
6.875
4.740
4.375
2.250
7.498
2.000
2.875
4.750
3.250
4.937
3.875
6.375
4.999
7.000
4.000
4.921
2.875
4.000
3.937
3.543
4.134
3.938
3.750
3.543
3.542
3.740
5.118
5.315
5.512
8.661
4.724
4.921
2.441
3.740
6.875
6.906
4.002
5.827
6.378
6.297
4.960
5.188
3.812
7.500

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO

PART NO

SHAFT

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29500-4872
29500-4874
29500-4883
29500-4895
29500-4979
29500-4981
29500-4984
29500-4994
29500-5066
29500-5087
29500-5119
29500-5158
29500-5159
29500-5293
29500-5328
29500-5367
29500-5383
29500-5479
29500-5481
29500-5487
29500-5512
29500-5522
29500-5567
29500-5569
29500-5645
29500-5699
29500-5700
29500-5716
29500-5722
29500-5772
29500-5808
29502-0774
29502-0815
29502-1745
29502-1864
29502-2051
29502-2141
29502-2175
29502-2573
29502-3349
29502-3362
29502-3370
29502-3405
29502-3453
29502-3465
29502-3467
29502-3497
29502-3553
29502-3585
29502-3601
29502-4104
29502-4107

2.437
2.250
2.360
1.575
3.740
4.134
4.331
5.512
3.125
3.335
4.875
7.874
4.724
3.150
1.810
2.559
4.331
3.543
6.000
3.149
2.362
6.625
1.890
2.480
5.000
4.375
3.500
4.250
2.188
2.625
8.625
3.375
1.125
2.125
5.375
4.563
2.438
3.000
5.250
2.000
6.000
6.000
6.250
7.000
6.750
6.750
7.000
7.500
1.875
8.000
1.375
1.750

BORE
4.725
3.625
3.360
2.575
4.921
5.118
5.512
6.693
4.250
4.335
7.000
8.874
5.724
4.724
2.875
4.331
5.331
4.543
7.375
4.724
3.362
7.625
2.890
3.480
7.000
5.500
4.381
5.376
2.937
3.750
10.250
4.375
2.250
3.625
6.375
5.563
3.313
4.000
6.750
3.000
7.000
7.500
7.750
8.000
8.250
8.000
8.250
9.000
2.875
9.500
2.835
2.875

WIDTH
0.725
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-121

Oil Seals by Model Number

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

Garlock

PART NO

SHAFT

BORE

WIDTH

29502-4108
29502-4109
29502-4110
29502-4111
29502-4112
29502-4113
29502-4114
29502-4115
29502-4116
29502-4117
29502-4118
29502-4119
29502-4120
29502-4123
29502-4124
29502-4125
29502-4126
29502-4138
29502-4139
29502-4140
29502-4141
29502-4143
29502-4144
29502-4145
29502-4146
29502-4148
29502-4149
29502-4150
29502-4151
29502-4152
29502-4153
29502-4154
29502-4156
29502-4157
29502-4158
29502-4159
29502-4160
29502-4161
29502-4163
29502-4164
29502-4165
29502-4166
29502-4167
29502-4168
29502-4169
29502-4170
29502-4171
29502-4172
29502-4173
29502-4174
29502-4175
29502-4177

1.125
2.125
1.875
2.500
2.375
3.313
3.125
4.312
4.125
1.438
1.375
2.062
1.937
0.875
1.875
2.625
2.625
1.000
1.125
1.250
1.375
1.500
1.625
1.750
2.125
2.250
2.375
2.500
2.625
2.750
2.875
3.250
3.500
3.625
3.750
3.875
4.000
4.125
4.250
4.375
4.500
4.625
4.750
4.875
5.000
5.125
5.250
5.500
5.625
5.750
5.875
1.437

2.000
2.875
2.750
3.250
3.250
4.125
4.125
5.500
5.250
2.250
2.125
3.000
3.000
1.625
2.625
3.677
3.688
2.000
2.125
2.250
2.375
2.500
2.625
2.750
3.125
3.250
3.375
3.500
3.625
3.750
3.875
4.250
4.500
4.625
4.750
4.875
5.000
5.125
5.250
5.375
5.500
5.625
5.750
5.875
6.000
6.125
6.250
6.500
6.625
6.750
6.875
2.437

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

PART NO

SHAFT

BORE

WIDTH

29502-4179
29502-4181
29502-4182
29502-4185
29502-4186
29502-4187
29502-4189
29502-4190
29502-4191
29502-4192
29502-4193
29502-4203
29502-4204
29502-4205
29502-4208
29502-4209
29502-4211
29502-4212
29502-4213
29502-4214
29502-4215
29502-4217
29502-4218
29502-4235
29502-4257
29502-4266
29502-4267
29502-4270
29502-4271
29502-4272
29502-4273
29502-4274
29502-4275
29502-4276
29502-4277
29502-4278
29502-4279
29502-4280
29502-4281
29502-4282
29502-4283
29502-4284
29502-4285
29502-4286
29502-4287
29502-4288
29502-4289
29502-4290
29502-4291
29502-4292
29502-4293
29502-4295

2.625
1.125
1.000
1.250
3.250
2.750
1.890
2.165
2.362
2.756
3.346
5.000
2.187
2.125
5.250
4.000
5.875
4.500
4.500
3.500
2.875
2.000
4.750
1.500
2.313
0.625
0.875
0.938
1.063
1.188
1.313
1.563
1.688
1.812
1.938
2.063
2.187
2.437
2.562
2.688
2.812
2.938
3.063
3.188
3.313
3.438
3.563
3.688
3.812
3.938
4.063
4.188

3.675
2.441
1.750
2.000
4.000
3.500
2.756
3.150
3.346
3.740
4.331
6.250
3.000
3.000
6.500
5.375
7.125
6.000
5.250
4.375
4.125
3.125
6.000
2.250
3.313
1.625
1.875
1.938
2.063
2.188
2.313
2.563
2.688
2.812
2.938
3.063
3.187
3.437
3.562
3.688
3.812
3.938
4.063
4.188
4.313
4.438
4.563
4.688
4.812
4.938
5.063
5.188

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-122

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29502-4296
29502-4297
29502-4298
29502-4299
29502-4300
29502-4301
29502-4302
29502-4303
29502-4304
29502-4305
29502-4306
29502-4307
29502-4308
29502-4309
29502-4310
29502-4311
29502-4312
29502-4313
29502-4314
29502-4315
29502-4316
29502-4319
29502-4320
29502-4322
29502-4323
29502-4324
29502-4325
29502-4326
29502-4327
29502-4328
29502-4329
29502-4330
29502-4331
29502-4332
29502-4335
29502-4336
29502-4338
29502-4348
29502-4350
29502-4351
29502-4352
29502-4353
29502-4354
29502-4356
29502-4366
29502-4367
29502-4368
29502-4374
29502-4379
29502-4385
29502-4386
29502-4391

4.313
4.438
4.688
4.812
4.938
5.063
5.188
5.313
5.438
5.563
5.688
5.812
5.938
6.063
6.125
6.188
6.250
6.313
6.375
6.438
6.500
1.750
1.375
1.125
1.750
2.375
3.400
2.000
1.625
3.000
1.375
1.875
2.875
2.625
2.065
1.185
2.280
1.750
1.766
2.355
3.000
2.500
3.375
1.900
4.187
2.250
2.246
2.500
3.375
3.375
2.875
4.500

5.313
5.438
5.688
5.812
5.938
6.063
6.188
6.313
6.438
6.563
6.688
6.812
6.938
7.063
7.125
7.188
7.250
7.313
7.375
7.438
7.500
2.500
2.437
1.875
2.625
3.125
4.400
2.750
2.500
3.875
3.125
2.686
4.000
3.484
3.000
2.442
3.280
3.938
2.750
3.870
4.910
4.375
5.250
3.500
5.250
3.190
4.500
3.750
4.500
4.125
4.625
5.750

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29502-4402
29502-4403
29502-4408
29502-4422
29502-4425
29502-4438
29502-4439
29502-4440
29502-4441
29502-4448
29502-4457
29502-4462
29502-4470
29502-4477
29502-4478
29502-4479
29502-4480
29502-4483
29502-4489
29502-4490
29502-4491
29502-4492
29502-4529
29502-4532
29502-4541
29502-4542
29502-4544
29502-4546
29502-4548
29502-4550
29502-4553
29502-4559
29502-4560
29502-4572
29502-4574
29502-4581
29502-4589
29502-4590
29502-4591
29502-4594
29502-4595
29502-4601
29502-4602
29502-4603
29502-4604
29502-4609
29502-4615
29502-4617
29502-4622
29502-4623
29502-4630
29502-4638

1.127
2.159
2.250
1.180
3.250
2.625
1.654
1.457
1.575
0.787
2.990
2.250
1.562
3.313
2.312
2.875
4.250
2.530
2.053
1.772
3.535
2.165
1.378
2.559
2.685
6.375
2.938
1.755
2.875
3.188
1.969
1.188
1.812
4.062
3.150
1.772
2.746
2.158
1.962
2.938
1.500
2.352
3.825
3.420
4.520
2.350
1.625
2.125
3.850
2.400
2.558
2.160

2.000
3.000
2.997
2.835
4.500
3.500
2.625
2.500
3.071
1.575
3.750
3.000
2.502
4.375
3.250
3.750
5.500
3.287
3.000
2.756
4.500
2.953
2.165
3.346
3.998
7.498
4.125
3.358
3.625
4.250
3.543
2.000
2.875
5.125
4.250
2.953
3.746
3.158
2.962
4.000
2.254
3.375
4.875
4.500
5.500
3.350
2.375
3.187
4.875
3.375
3.558
3.195

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-123

Oil Seals by Model Number

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

Garlock

PART NO

SHAFT

BORE

WIDTH

29502-4641
29502-4649
29502-4650
29502-4655
29502-4658
29502-4664
29502-4665
29502-4666
29502-4679
29502-4680
29502-4683
29502-4684
29502-4687
29502-4688
29502-4689
29502-4692
29502-4693
29502-4700
29502-4704
29502-4705
29502-4706
29502-4708
29502-4709
29502-4714
29502-4715
29502-4716
29502-4720
29502-4721
29502-4722
29502-4728
29502-4731
29502-4735
29502-4742
29502-4749
29502-4758
29502-4769
29502-4770
29502-4771
29502-4772
29502-4775
29502-4777
29502-4786
29502-4798
29502-4806
29502-4807
29502-4808
29502-4809
29502-4810
29502-4812
29502-4813
29502-4818
29502-4819

3.937
3.937
3.438
3.156
2.997
1.925
1.965
2.400
1.625
1.250
2.500
1.181
2.350
1.950
1.370
1.760
2.360
1.969
1.875
2.420
2.750
2.750
3.000
1.938
3.550
1.920
1.173
2.559
3.345
3.150
0.875
5.500
1.450
2.953
3.543
4.298
2.942
1.563
2.554
3.125
3.125
2.165
3.150
2.375
2.125
1.575
1.875
1.500
2.228
2.258
2.710
1.969

4.999
4.921
4.500
4.250
3.831
3.000
3.000
3.500
2.437
2.438
3.543
2.362
3.375
3.000
2.375
2.875
3.375
2.953
3.938
3.355
4.000
3.625
3.750
2.875
4.550
3.000
2.441
3.543
4.320
4.135
2.750
10.250
2.360
3.937
4.724
5.298
3.942
2.623
3.554
3.875
3.938
3.189
3.937
3.500
3.250
2.441
3.000
2.375
3.228
3.258
3.710
2.756

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

PART NO

SHAFT

BORE

WIDTH

29502-4822
29502-4825
29502-4826
29502-4828
29502-4831
29502-4837
29502-4838
29502-4843
29502-4846
29502-4847
29502-4850
29502-4859
29502-4860
29502-4874
29502-4877
29502-4880
29502-4883
29502-4884
29502-4887
29502-4888
29502-4966
29502-4969
29502-4980
29502-4981
29502-4982
29502-4984
29502-5001
29502-5003
29502-5005
29502-5007
29502-5024
29502-5039
29502-5042
29502-5043
29502-5044
29502-5045
29502-5049
29502-5051
29502-5053
29502-5055
29502-5056
29502-5057
29502-5058
29502-5059
29502-5065
29502-5066
29502-5071
29502-5072
29502-5073
29502-5076
29502-5080
29502-5081

2.953
1.614
3.312
1.625
5.906
4.851
2.938
1.562
2.441
2.432
2.938
3.937
1.260
2.250
1.562
1.968
2.360
4.125
2.450
3.140
2.559
2.756
3.938
4.134
4.134
4.331
2.540
2.125
2.750
1.187
1.375
1.125
2.500
2.380
3.188
2.500
0.983
1.573
2.161
3.142
2.240
3.731
3.375
2.317
2.625
3.125
1.125
3.937
2.625
2.354
2.625
2.375

3.740
2.402
4.213
2.525
6.906
5.886
4.295
2.500
3.441
3.432
3.750
5.118
2.165
3.625
2.441
2.718
3.360
5.375
3.450
4.140
3.937
3.543
4.724
5.118
5.512
5.512
3.540
3.375
3.720
2.437
2.625
2.375
3.623
3.375
4.312
3.875
1.983
2.572
3.161
4.142
3.240
4.731
4.625
3.375
4.003
4.250
2.050
4.960
4.000
3.354
3.670
3.255

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-124

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29502-5090
29502-5094
29502-5101
29502-5123
29502-5127
29502-5128
29502-5132
29502-5133
29502-5135
29502-5141
29502-5143
29502-5148
29502-5149
29502-5154
29502-5160
29502-5161
29502-5163
29502-5165
29502-5166
29502-5167
29502-5168
29502-5169
29502-5203
29502-5210
29502-5211
29502-5213
29502-5214
29502-5215
29502-5258
29502-5268
29502-5274
29502-5279
29502-5285
29502-5287
29502-5288
29502-5289
29502-5292
29502-5296
29502-5307
29502-5312
29502-5313
29502-5314
29502-5329
29502-5333
29502-5334
29502-5342
29502-5362
29502-5364
29502-5372
29502-5381
29502-5383
29502-5385

3.464
6.438
1.250
4.313
2.938
3.938
4.450
3.420
1.772
3.150
2.500
1.200
1.180
2.619
2.015
2.375
2.625
3.563
1.180
1.754
1.967
3.158
4.000
3.605
2.248
3.189
1.250
3.000
3.687
1.437
1.937
5.500
6.000
6.750
2.437
2.400
1.562
3.634
2.188
2.875
3.149
3.580
2.819
3.000
1.375
2.165
3.125
3.750
1.496
3.500
4.331
5.187

4.500
7.687
2.875
5.687
4.003
5.250
5.437
4.375
2.622
4.150
4.000
2.000
2.000
3.682
3.000
3.371
3.543
4.500
2.180
2.754
2.967
4.158
4.875
4.625
3.150
4.252
3.150
5.875
4.560
2.694
2.750
6.693
6.750
7.750
3.750
3.438
3.548
4.625
3.251
4.250
4.122
4.916
3.813
4.500
2.500
3.165
4.003
5.000
2.362
5.250
5.331
7.000

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29502-5386
29502-5395
29502-5396
29502-5397
29502-5398
29502-5403
29502-5404
29502-5410
29502-5413
29502-5415
29502-5419
29502-5420
29502-5423
29502-5424
29502-5436
29502-5443
29502-5455
29502-5463
29502-5469
29502-5470
29502-5471
29502-5472
29502-5473
29502-5476
29502-5480
29502-5481
29502-5489
29502-5498
29502-5511
29502-5513
29502-5517
29502-5520
29502-5524
29502-5526
29502-5533
29502-5534
29502-5535
29502-5538
29502-5539
29502-5540
29502-5541
29502-5542
29502-5543
29502-5545
29502-5548
29502-5549
29502-5550
29502-5555
29502-5558
29502-5565
29502-5569
29502-5570

1.375
3.071
2.820
3.937
3.346
3.008
2.718
4.750
2.938
1.688
2.250
2.726
3.000
5.250
1.438
2.345
3.016
2.225
2.925
1.125
1.750
2.625
2.356
3.812
4.000
6.000
1.438
3.250
1.168
4.120
1.145
1.375
6.218
1.171
2.047
0.984
2.362
2.160
1.575
1.654
1.772
2.165
2.362
2.205
4.331
5.591
4.724
6.000
2.500
6.875
2.480
1.938

2.812
4.331
3.843
4.990
4.335
4.008
3.700
5.500
4.500
2.625
3.125
3.500
5.000
6.000
2.500
3.375
4.016
3.225
3.925
2.062
2.700
4.050
3.780
4.875
5.250
7.375
2.375
4.030
2.437
5.000
2.000
2.250
8.062
2.250
3.150
1.890
3.111
3.160
2.362
2.441
2.559
3.071
3.150
3.150
5.562
6.378
5.512
7.059
4.724
7.875
3.480
3.149

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-125

Oil Seals by Model Number

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

Garlock

PART NO

SHAFT

BORE

WIDTH

29502-5578
29502-5579
29502-5583
29502-5584
29502-5585
29502-5589
29502-5592
29502-5594
29502-5596
29502-5619
29502-5621
29502-5622
29502-5628
29502-5632
29502-5634
29502-5636
29502-5646
29502-5647
29502-5648
29502-5653
29502-5654
29502-5657
29502-5658
29502-5687
29502-5689
29502-5692
29502-5697
29502-5701
29502-5702
29502-5705
29502-5706
29502-5707
29502-5712
29502-5713
29502-5717
29502-5718
29502-5719
29502-5721
29502-5723
29502-5729
29502-5730
29502-5731
29502-5734
29502-5735
29502-5739
29502-5742
29502-5743
29502-5745
29502-5746
29502-5748
29502-5749
29502-5751

1.500
2.500
6.125
1.181
2.375
2.953
3.438
1.772
1.468
2.000
1.250
3.150
2.498
1.969
2.062
4.640
2.559
2.775
3.925
2.312
2.134
3.100
3.600
2.430
1.241
1.688
2.950
3.346
6.430
2.062
2.554
4.438
6.063
1.938
4.362
2.550
4.100
3.790
3.125
2.341
3.725
1.562
2.275
4.325
2.953
2.950
1.500
5.375
7.375
3.540
3.535
3.685

2.864
5.118
7.625
2.441
3.130
4.175
5.000
2.750
2.375
3.250
3.125
4.500
3.368
2.992
3.125
5.640
4.134
3.775
4.925
3.500
3.066
4.100
4.600
3.623
2.253
3.437
3.950
4.134
7.500
2.875
3.375
5.562
7.500
2.688
5.362
3.550
5.100
4.790
4.312
3.151
4.725
2.598
3.275
5.325
4.331
4.000
2.750
6.125
8.625
4.540
4.535
4.685

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

PART NO

SHAFT

BORE

WIDTH

29502-5753
29502-5754
29502-5755
29502-5757
29502-5763
29502-5766
29502-5767
29502-5769
29502-5772
29502-5773
29502-5774
29502-5775
29502-5778
29502-5793
29502-5794
29502-5795
29502-5798
29502-5801
29502-5803
29502-5807
29502-5810
29502-5813
29502-5815
29502-5816
29502-5818
29502-5819
29502-5820
29502-5821
29502-5825
29502-5912
29502-5930
29502-5931
29502-5933
29502-6231
29502-6574
29502-9354
29507-0706
29507-0988
29507-0989
29507-0991
29507-0998
29507-1012
29507-1062
29507-1075
29507-1089
29507-1092
29507-1118
29507-1146
29507-1152
29507-1194
29507-1214
29507-1215

1.906
4.515
3.420
3.750
3.110
1.772
4.331
2.125
2.625
2.677
5.635
1.375
2.500
2.500
0.866
2.559
1.378
2.335
2.559
1.772
6.498
4.488
2.625
3.250
2.312
1.772
2.250
4.375
2.300
4.375
1.772
2.283
3.500
2.363
5.500
8.000
1.875
1.125
1.875
2.500
1.750
0.875
1.750
1.875
1.625
1.375
1.500
1.312
1.125
1.500
1.500
1.250

2.752
5.515
4.420
5.500
4.331
3.021
5.125
3.500
3.750
4.000
6.874
3.150
4.875
3.625
1.969
3.583
2.835
3.335
4.724
3.543
9.125
5.512
5.250
5.250
3.750
3.346
3.500
5.312
3.300
6.000
2.835
4.409
4.721
3.150
6.750
9.250
3.000
2.000
2.625
3.250
2.875
1.625
2.625
2.750
2.625
2.125
2.125
2.000
1.876
2.500
2.375
2.000

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-126

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29507-1238
29507-1249
29507-1251
29507-1322
29507-1348
29507-1350
29507-1581
29507-1744
29507-1818
29507-1958
29507-1976
29507-1976
29507-2016
29507-2182
29507-2222
29507-2273
29507-2405
29507-2604
29507-2659
29507-2684
29507-2711
29507-2714
29507-2755
29507-2940
29507-2971
29507-3029
29507-3052
29507-3107
29507-3266
29507-3316
29507-3388
29507-3398
29507-3534
29507-4106
29507-4121
29507-4122
29507-4123
29507-4130
29507-4176
29507-4183
29507-4184
29507-4206
29507-4317
29507-4318
29507-4333
29507-4334
29507-4337
29507-4339
29507-4340
29507-4398
29507-4414
29507-4456

2.750
2.000
2.562
2.125
2.362
2.000
2.375
1.750
2.500
1.437
2.625
2.625
2.500
0.875
3.125
1.125
3.543
4.125
4.250
1.000
0.875
0.938
4.500
1.375
1.571
1.562
2.160
2.755
1.967
2.953
1.181
1.000
1.250
0.875
1.062
0.937
0.875
1.500
1.375
1.750
1.125
1.063
0.625
1.370
1.060
1.125
2.155
0.875
1.250
2.950
1.812
1.438

3.500
2.750
3.562
2.875
3.150
3.000
3.250
2.750
3.500
2.375
3.250
3.250
3.189
1.375
4.000
1.625
4.543
5.125
5.250
1.500
1.875
1.938
5.500
2.000
2.571
2.500
3.160
3.741
2.967
3.740
2.181
1.750
1.687
1.250
1.624
1.500
1.625
2.000
1.875
2.375
1.750
1.643
1.250
2.060
1.625
1.562
2.875
1.500
1.750
3.460
2.312
2.125

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29507-4458
29507-4484
29507-4522
29507-4533
29507-4539
29507-4545
29507-4547
29507-4551
29507-4554
29507-4563
29507-4564
29507-4586
29507-4637
29507-4659
29507-4667
29507-4711
29507-4718
29507-4724
29507-4793
29507-4815
29507-4839
29507-4840
29507-4864
29507-4868
29507-4889
29507-4890
29507-4893
29507-4920
29507-4922
29507-4924
29507-4925
29507-4926
29507-4934
29507-4938
29507-4945
29507-4948
29507-4951
29507-4952
29507-5004
29507-5006
29507-5012
29507-5013
29507-5014
29507-5016
29507-5062
29507-5063
29507-5068
29507-5093
29507-5097
29507-5098
29507-5112
29507-5126

2.362
2.676
2.938
0.938
2.000
1.570
2.375
0.750
1.772
0.984
2.875
1.750
0.625
0.500
2.149
1.063
1.575
0.687
2.750
1.375
2.145
1.125
1.732
0.787
1.936
2.437
3.500
1.181
1.260
1.378
1.378
1.378
1.496
1.654
1.969
2.047
2.165
2.165
2.955
4.130
2.188
2.543
2.746
2.556
2.875
2.375
1.575
2.200
1.375
2.125
1.156
2.362

2.953
3.362
3.623
2.048
2.625
2.250
3.062
1.875
2.165
1.850
3.500
2.250
1.300
1.500
2.875
1.875
2.047
1.125
3.250
2.103
2.871
1.855
2.250
1.378
2.367
2.930
4.125
1.654
1.850
1.850
1.969
2.047
2.165
2.165
2.677
2.677
2.756
2.835
3.500
4.505
2.832
3.543
3.746
3.556
3.375
2.938
2.283
2.750
2.263
3.129
1.875
3.308

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-127

Oil Seals by Model Number

MODEL NO
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

Garlock

PART NO

SHAFT

BORE

WIDTH

MODEL NO

PART NO

SHAFT

BORE

WIDTH

29507-5129
29507-5136
29507-5137
29507-5138
29507-5139
29507-5151
29507-5153
29507-5171
29507-5199
29507-5200
29507-5201
29507-5204
29507-5205
29507-5207
29507-5215
29507-5217
29507-5218
29507-5225
29507-5265
29507-5266
29507-5270
29507-5282
29507-5283
29507-5290
29507-5291
29507-5295
29507-5308
29507-5316
29507-5318
29507-5319
29507-5322
29507-5326
29507-5360
29507-5363
29507-5373
29507-5384
29507-5394
29507-5401
29507-5406
29507-5408
29507-5412
29507-5435
29507-5478
29507-5482
29507-5502
29507-5518
29507-5519
29507-5536
29507-5544
29507-5547
29507-5552
29507-5554

1.938
3.188
4.000
1.766
2.441
2.000
2.938
0.983
2.185
1.685
1.745
1.181
0.984
1.125
3.000
1.754
3.158
1.726
2.375
4.331
1.889
0.785
0.750
1.625
1.773
2.147
1.813
2.490
1.998
1.750
0.781
4.646
1.625
1.878
1.500
0.750
1.125
1.750
2.438
1.688
1.000
0.906
2.148
1.570
2.000
1.880
1.685
1.260
2.559
1.938
1.417
1.969

2.623
3.688
4.500
2.323
2.992
2.712
3.544
1.983
3.185
2.685
2.745
1.772
1.486
1.500
5.875
2.754
4.158
2.250
3.000
4.961
2.874
1.750
1.125
2.250
2.500
2.875
2.750
2.875
2.500
2.312
1.375
5.039
2.125
2.754
2.219
1.378
1.875
2.437
2.813
2.506
1.687
1.500
2.875
2.000
2.500
2.625
3.185
1.654
3.228
2.412
2.125
2.690

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB

29507-5563
29507-5564
29507-5586
29507-5624
29507-5649
29507-5650
29507-5651
29507-5685
29507-5703
29507-5724
29507-5737
29507-5738
29507-5744
29507-5747
29507-5812
29507-5817
29507-5824
29507-5922
29516-4832
29516-5113
29516-5124
29516-5125
29516-5131
29516-5271
29516-5272
29516-5411
29516-5432
29516-5504
29516-7069
29516-7070
29516-7071
29516-7072
29516-7073
29516-7074
29516-7075
29516-7076
29516-7077
29516-7078
29516-7079
29516-7080
29516-7081
29516-7082
29516-7083
29516-7084
29516-7085
29516-7086
29516-7087
29516-7088
29516-7089
29516-7090
29516-7091
29516-7092

4.938
2.250
0.984
1.438
2.500
3.000
2.027
1.062
1.938
7.250
1.716
1.768
2.000
1.875
1.156
0.590
1.875
2.125
2.938
3.938
3.375
4.125
3.188
4.125
3.375
2.559
1.438
6.000
2.438
3.000
3.625
5.313
6.250
6.063
7.000
2.250
2.875
2.063
2.563
1.875
2.375
2.438
2.500
3.063
2.813
3.438
3.813
4.188
4.875
4.563
5.313
1.938

5.500
2.875
1.929
1.938
3.000
3.500
2.626
1.500
2.500
7.625
2.219
2.193
2.375
2.250
2.000
1.375
2.500
2.750
3.817
5.807
4.335
5.085
4.335
5.085
4.335
3.760
2.063
7.343
3.188
3.813
4.333
6.375
7.343
7.343
8.383
2.938
3.563
2.823
3.198
2.563
2.948
3.188
3.188
3.813
3.563
4.333
4.773
5.230
5.980
5.543
6.375
2.563

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
1.000
0.828
0.770
0.770
1.000
1.051
0.990
0.788
0.820
0.983
0.945
1.007
1.102
1.187
1.187
1.187
1.062
1.007
1.102
0.974
0.974
0.974
0.974
1.102
1.102
1.007
1.102
1.102
1.062
1.062
1.062
1.062
1.062
0.974

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-128

Rev. 1/01

Garlock

Oil Seals by Model Number

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IGSPB
IG
IG
IG
IG
IG
IG
IG
IG
IG

29516-7093
29516-7094
29516-7095
29516-7096
29516-7097
29516-7098
29516-7099
29516-7100
29516-7102
29516-7103
29516-7104
29516-7105
29516-7106
29516-7107
29516-7108
29516-7109
29516-7110
29516-7112
29516-7113
29516-7114
29516-7115
29516-7116
29516-7117
29516-7121
29516-7122
29516-7123
29516-7125
29516-7126
29516-7127
29516-7128
29516-7129
29516-7130
29516-7133
29516-7134
29516-7135
29516-7136
29516-7137
29516-7139
29516-7142
29516-7146
29516-7148
29516-7150
29516-7152
29519-0988
29519-0989
29519-0998
29519-1075
29519-1083
29519-1092
29519-1220
29519-1238
29519-1265

2.188
2.688
2.938
3.250
3.500
3.938
4.438
4.938
5.000
5.438
6.438
2.188
2.938
6.938
3.188
6.938
5.938
3.438
3.438
3.500
2.938
3.437
3.937
5.188
4.437
4.938
5.875
5.750
6.625
1.500
1.688
1.772
3.938
4.938
4.500
2.362
4.125
2.438
3.346
7.437
4.500
5.500
2.953
1.125
1.875
1.750
1.875
1.000
1.375
3.000
2.750
3.000

2.823
3.563
3.813
4.335
4.523
4.960
5.543
5.980
5.980
6.750
7.780
2.938
3.940
8.383
4.335
8.383
7.343
4.460
4.523
5.807
4.173
5.807
6.201
6.375
6.201
6.988
6.938
6.938
7.718
2.063
2.313
3.228
5.085
7.382
5.543
3.366
5.230
3.876
4.370
8.945
6.988
6.750
3.976
2.000
2.625
2.875
2.750
2.000
2.125
4.000
3.500
3.750

0.974
1.102
1.007
1.124
1.124
1.062
1.062
1.062
1.062
0.983
1.187
1.007
1.062
1.249
1.124
1.312
1.200
1.124
1.124
0.828
0.879
0.828
0.988
1.116
0.828
0.827
1.116
1.116
1.116
0.820
0.820
0.710
1.050
0.918
1.050
0.788
0.963
0.700
0.694
1.115
0.807
1.062
0.696
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

MODEL NO

PART NO

SHAFT

BORE

WIDTH

IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG
IG

29519-1479
29519-1818
29519-2923
29519-3114
29519-3125
29519-3294
29519-3426
29519-3462
29519-3552
29519-5126
29519-5641
29519-5643
29519-5655
29519-5736
29519-5741
29519-5750
29519-5756
29519-5783
29519-5806

2.250
2.500
5.000
2.559
4.332
2.438
6.500
6.750
7.500
2.362
3.150
2.500
6.442
0.984
6.430
8.661
2.480
7.087
2.938

3.000
3.500
6.250
3.583
5.354
3.350
7.500
8.125
9.000
3.308
4.375
3.625
7.500
1.772
7.500
9.912
3.268
8.071
3.875

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.640
0.625
0.625
0.625
0.625
0.625
0.625
0.625

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-129

Oil Seals by Model Number

MODEL NO.

GARLOCK PART NO.

Garlock

SHAFT DIAMETER

MODEL NO.

GARLOCK PART NO.

SHAFT DIAMETER

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0450
21700-0455
21700-0460
21700-0465
21700-0470

17.72
17.91
18.11
18.31
18.50

17.91
18.11
18.31
18.50
18.70

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0660
21700-0670
21700-0680
21700-0690
21700-0700

25.98
26.38
26.77
21.17
27.56

26.38
26.77
27.17
27.56
27.95

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0475
21700-0480
21700-0485
21700-0490
21700-0495

18.70
18.90
19.09
19.29
19.49

18.90
19.09
19.29
19.49
19.69

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0710
21700-0720
21700-0730
21700-0740
21700-0750

27.95
28.35
28.74
29.13
29.53

28.35
28.74
29.13
29.53
29.84

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0500
21700-0505
21700-0510
21700-0515
21700-0520

19.69
19.88
20.08
20.28
20.47

19.88
20.08
20.28
20.47
20.67

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0760
21700-0770
21700-0780
21700-0790
21700-0800

29.84
30.16
30.47
30.83
31.18

30.16
30.47
30.83
31.18
31.54

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0525
21700-0530
21700-0535
21700-0540
21700-0545

20.67
20.87
21.06
21.26
21.46

20.87
21.06
21.26
21.46
21.65

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0810
21700-0820
21700-0830
21700-0840
21700-0850

31.54
31.89
32.32
32.72
33.11

31.89
32.32
32.72
33.11
33.50

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0550
21700-0555
21700-0560
21700-0565
21700-0570

21.65
21.85
22.05
22.24
22.44

21.85
22.05
22.24
22.44
22.64

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0860
21700-0870
21700-0880
21700-0890
21700-0900

33.50
33.90
34.29
34.72
35.12

33.90
34.29
34.72
35.12
35.91

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0575
21700-0580
21700-0585
21700-0590
21700-0600

22.64
22.84
23.03
23.23
23.62

22.84
23.03
23.23
23.62
24.02

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0920
21700-0930
21700-0940
21700-0950
21700-0960

35.91
36.30
36.73
37.17
37.60

36.30
36.73
37.17
37.60
38.03

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0610
21700-0620
21700-0630
21700-0640
21700-0650

24.02
24.41
24.80
25.20
25.59

24.41
24.80
25.20
25.59
25.98

145A-1
145A-1
145A-1
145A-1
145A-1

21700-0970
21700-0980
21700-0990
21700-1000
21700-1020

38.03
38.47
38.90
39.33
39.76

38.47
38.90
39.33
39.76
40.35

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-131

Rev. 1/01

Garlock
MODEL NO.

Oil Seals by Model Number

GARLOCK PART NO.

SHAFT DIAMETER

MODEL NO.

GARLOCK PART NO.

SHAFT DIAMETER

145A-1
145A-1
145A-1
145A-1
145A-1

21700-1040
21700-1060
21700-1080
21700-1100
21700-1120

40.35
41.14
41.93
42.72
43.50

41.14
41.93
42.72
43.50
44.29

145A-2
145A-2
145A-2
145A-2
145A-2

21750-0200
21750-0220
21750-0250
21750-0275
21750-0300

7.48 - 8.27
8.27 - 9.25
9.25 - 10.43
10.43 - 11.42
11.42 - 12.20

145A-1
145A-1
145A-1
145A-1
145A-1

21700-1140
21700-1160
21700-1180
21700-1200
21700-1220

44.29
45.08
45.87
46.65
47.44

45.08
45.87
46.65
47.44
48.23

145A-2
145A-2
145A-2
145A-2
145A-2

21750-0325
21750-0350
21750-0375
21750-0400
21750-0450

12.20
13.19
14.37
15.35
16.93

13.19
14.37
15.35
16.93
18.90

145A-1
145A-1
145A-1
145A-1
145A-1

21700-1240
21700-1260
21700-1280
21700-1300
21700-1325

48.23
49.02
50.00
50.98
51.77

49.02
50.00
50.98
51.77
52.76

145A-2
145A-2
145A-2
145A-2
145A-2

21750-0500
21750-0550
21750-0600
21750-0650
21750-0700

18.90
20.87
22.83
24.80
26.18

20.87
22.83
24.80
26.18
27.76

145A-1
145A-1
145A-1
145A-1
145A-1

21700-1350
21700-1375
21700-1400
21700-1425
21700-1450

52.76
53.74
54.72
55.71
56.69

53.74
54.72
55.71
56.69
57.68

145A-2
145A-2
145A-2
145A-2
145A-2

21750-0725
21750-0750
21750-0800
21750-0850
21750-0900

27.76
29.33
30.91
32.68
34.45

29.33
30.91
32.68
34.45
36.22

145A-1
145A-1
145A-1
145A-1
145A-1

21700-1475
21700-1500
21700-1525
21700-1550
21700-1575

57.68
58.66
59.65
60.63
61.81

58.66
59.65
60.63
61.81
62.99

145A-2
145A-2
145A-2
145A-2
145A-2

21750-0950
21750-1000
21750-1050
21750-1100
21750-1150

36.22
37.99
39.96
41.93
43.90

37.99
39.96
41.39
43.90
45.87

145A-1
145A-1
145A-1
145A-1
145A-1

21700-1600
21700-1650
21700-1700
21700-1750
21700-1800

62.99
64.57
66.14
67.72
69.49

64.57
66.14
67.72
69.49
71.26

145A-2
145A-2
145A-2
145A-2
145A-2

21750-1200
21750-1250
21750-1300
21750-1350
21750-1400

45.87
47.84
50.00
51.97
53.94

47.84
50.00
51.97
53.94
55.91

145A-1
145A-1
145A-1
145A-1

21700-1850
21700-1900
21700-1950
21700-2000

71.26
73.03
75.00
76.97

73.03
75.00
76.97
79.13

145A-2
145A-2
145A-2
145A-2
145A-2

21750-1450
21750-1500
21750-1550
21750-1600
21750-1650

55.91
57.87
59.84
61.81
63.78

57.87
59.84
61.81
63.78
65.75

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

M-132

Oil Seals by Model Number

MODEL NO.

GARLOCK PART NO.

Garlock

SHAFT DIAMETER

145A-2
145A-2
145A-2
145A-2
145A-2

21750-1700
21750-1750
21750-1800
21750-1850
21750-1900

65.75
67.72
69.69
71.65
73.62

145A-2
145A-2

21750-1950
21750-2000

75.59 - 77.56
77.56 - 79.53

MODEL NO.

GARLOCK PART NO.

SHAFT DIAMETER

67.72
69.69
71.65
73.62
75.59

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
M-133

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.188
0.188
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.281
0.281
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.315
0.343
0.343
0.343
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

0.750
0.750
0.500
0.562
0.750
0.750
0.750
0.750
0.750
0.750
0.875
0.686
0.750
0.506
0.562
0.687
0.687
0.750
0.750
0.750
0.750
0.875
0.875
0.709
0.750
0.750
0.875
0.562
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.875
0.875
0.875
0.875
0.875
0.875
1.000
1.000
1.000
1.000
1.125
1.125
1.182
1.250
1.260
1.375

0.250
0.250
0.125
0.187
0.250
0.250
0.250
0.469
0.469
0.469
0.250
0.125
0.250
0.125
0.156
0.219
0.250
0.250
0.250
0.250
0.312
0.250
0.312
0.197
0.250
0.312
0.250
0.094
0.125
0.187
0.250
0.250
0.250
0.250
0.312
0.469
0.250
0.250
0.250
0.312
0.469
0.690
0.312
0.312
0.375
0.375
0.312
0.375
0.312
0.312
0.312
0.312

MODEL NO. PART NO.

61
63
71
76
61
63
92
63R1
63R2
63T2
63
91
63
71
91
92
92
61
63
71
63
63
63
61
63
63
63
71
71
92
61
63
71
76
63
63R2
61
63
66
63
63R2
EQ
61
63
63
63F1
63
63
63
63
63
61

24060-7727
21158-7727
26001-7000
26193-6035
24060-3863
21158-3863
27063-3863
23547-7146
23548-7146
23550-7146
21158-3864
27023-7001
21158-0001
26001-8801
27023-6053
27063-9500
27063-6055
24060-0005
21158-0005
26001-0005
21158-0006
21158-0007
21158-0008
24060-1748
21158-0009
21158-0010
21158-0011
26001-7004
26001-7005
27063-9501
24060-0013
21158-0013
26001-0013
26193-0013
21158-0014
23548-6733
24060-0015
21158-0015
21527-0015
21158-0016
23548-8496
24807-2124
24060-0017
21158-0017
21158-0018
23078-0018
21158-0019
21158-0020
21158-8008
21158-0021
21158-8007
24060-0023

SHAFT

BORE

WIDTH

0.375
0.375
0.394
0.394
0.406
0.406
0.406
0.406
0.406
0.406
0.406
0.406
0.406
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.469
0.469
0.469
0.469
0.469
0.469
0.469
0.469
0.469
0.469
0.469
0.469

1.375
1.378
0.748
0.984
0.875
1.000
1.125
1.182
1.250
1.250
1.260
1.375
1.378
0.621
0.687
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
1.000
1.000
1.000
1.000
1.024
1.124
1.125
1.125
1.125
1.182
1.250
1.250
1.260
1.375
1.375
1.378
0.703
0.718
1.000
1.000
1.125
1.125
1.182
1.250
1.250
1.260
1.375
1.378

0.312
0.312
0.276
0.276
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.312
0.125
0.125
0.187
0.234
0.312
0.312
0.312
0.375
0.437
0.594
0.594
0.312
0.312
0.375
0.375
0.250
0.690
0.312
0.312
0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.312
0.125
0.125
0.312
0.375
0.312
0.375
0.312
0.312
0.312
0.312
0.312
0.312

MODEL NO. PART NO.

63
63
92
92
62
63
63
63
62
63
63
63
63
91
71
71
94
62
63
66
63
63F1
63R1
63T2
62
63
62
63
71
EQ
62
63
63
63
63
63
63
63
66
63
71
91
63
63
63
63
63
62
63
63
63
63

21158-0023
21158-8335
27063-0004
27063-0012
21702-0025
21158-0027
21158-0029
21158-8009
21702-0031
21158-0031
21158-8010
21158-0034
21158-8336
27023-6635
26001-6060
26001-7007
27223-6062
21702-0035
21158-0035
21527-0035
21158-0036
23078-7122
23547-5893
23550-5893
21702-0037
21158-0037
21702-0038
21158-0038
26001-7008
24807-3242
21702-0039
21158-0039
21158-0040
21158-8101
21158-0041
21158-0042
21158-8011
21158-3865
21527-3865
21158-8337
26001-7009
27023-9660
21158-0043
21158-0044
21158-0045
21158-0046
21158-8012
21702-0047
21158-0047
21158-6623
21158-3867
21158-8338

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-1

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.472
0.472
0.472
0.472
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500

0.866
0.984
1.102
1.102
0.687
0.687
0.750
0.750
0.801
0.875
0.875
0.875
0.999
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.124
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.182
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.260
1.375
1.375
1.375

0.276
0.276
0.276
0.276
0.094
0.125
0.109
0.125
0.187
0.125
0.234
0.312
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.594
0.594
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.375
0.375
0.531
0.562
0.562
0.312
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.375
0.562
0.312
0.312
0.312
0.312

Garlock

MODEL NO. PART NO.

92
92
61
92
71
71
71
71
76
71
94
76
3
61
92
25
61
61
62
63
61
62
63
67
63R1
63R2
3
61
92
62
63
67
68
62
63
63F1
63F1
63R1
63
3
61
71
62
63
67
68
63
63R1
63
62
63
67

27063-0020
27063-0022
24060-0024
27063-0024
26001-7011
26001-7012
26001-6069
26001-7013
26193-6071
26001-7014
27223-6074
26193-7501
28003-0060
24060-9505
27063-9505
25058-0049
24060-0049
24061-0049
21702-0049
21158-0049
24062-0050
21702-0050
21158-0050
21528-0050
23547-6442
23548-6442
28003-0072
24060-6077
27063-6077
21702-0051
21158-0051
21528-0051
21823-0051
21702-0052
21158-0052
23078-5391
23078-6986
23547-6986
21158-7345
28003-0081
24060-7016
26001-7016
21702-0053
21158-0053
21528-0053
21823-0053
21158-0054
23547-8272
21158-8013
21702-0055
21158-0055
21528-0055

SHAFT

BORE

WIDTH

0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.512
0.512
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.531
0.551
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562

1.375
1.375
1.375
1.378
1.378
1.500
1.500
1.500
1.500
1.500
1.500
1.606
1.606
1.125
1.125
1.182
1.250
1.250
1.250
1.260
1.375
1.378
1.500
0.945
0.750
0.875
1.000
1.000
1.000
1.000
1.000
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.182
1.250
1.250
1.250
1.250
1.250
1.260
1.375
1.375
1.375
1.375
1.375
1.375
1.378

0.312
0.375
0.562
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.625
0.625
0.625
0.312
0.375
0.312
0.312
0.375
0.375
0.312
0.312
0.312
0.312
0.276
0.094
0.187
0.187
0.250
0.312
0.312
0.594
0.312
0.312
0.312
0.312
0.375
0.437
0.562
0.312
0.312
0.312
0.312
0.375
0.562
0.312
0.312
0.312
0.312
0.375
0.406
0.562
0.250

MODEL NO. PART NO.

68
63
63T2
62
63
62
63
67
68
63
IG
EQ
EQ
63
63
63
63
62
63
63
63
63
63
92
71
76
76
92
62
63
63R2
62
63
67
68
63
63F1
63R2
63
63
67
68
63
63F1
63
63
67
68
63
63
63T2
76

21823-0055
21158-0056
23550-4781
21702-8102
21158-8102
21702-0057
21158-0057
21528-0057
21823-0057
21158-0058
29507-4659
24801-4568
24802-4568
21158-0059
21158-0060
21158-8015
21158-0061
21702-0062
21158-0062
21158-8016
21158-0063
21158-8340
21158-0065
27063-0026
26001-7017
26193-7503
26193-7504
27063-9507
21702-3869
21158-3869
23548-4852
21702-0067
21158-0067
21528-0067
21823-0067
21158-0068
23078-8763
23548-6567
21158-8018
21158-0069
21528-0069
21823-0069
21158-0070
23078-7201
21158-6643
21158-0071
21528-0071
21823-0071
21158-0072
21158-5396
23550-8267
26193-9370

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-2

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.562
0.590
0.591
0.591
0.591
0.591
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.594
0.624
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

1.378
1.378
1.378
1.500
1.500
1.500
1.575
1.575
1.575
1.375
0.945
1.024
1.260
1.378
1.125
1.125
1.125
1.125
1.125
1.182
1.182
1.250
1.250
1.250
1.260
1.375
1.375
1.375
1.375
1.375
1.378
1.500
1.500
1.575
1.575
1.374
0.812
0.812
1.000
1.000
1.000
1.000
1.062
1.124
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125

0.312
0.375
0.375
0.312
0.312
0.312
0.312
0.312
0.312
0.625
0.276
0.276
0.276
0.276
0.250
0.312
0.312
0.375
0.437
0.312
0.312
0.312
0.375
0.375
0.312
0.312
0.312
0.375
0.562
0.562
0.312
0.312
0.375
0.312
0.312
0.625
0.094
0.094
0.125
0.250
0.250
0.250
0.187
0.250
0.125
0.187
0.250
0.250
0.312
0.312
0.312
0.312

MODEL NO. PART NO.

63
67
68
63
67
68
63
67
68
IG
92
92
92
92
92
62
63
63
63F1
61
63
63
62
63
63
63
94
63
63R2
63T2
63
63
63
62
63
EQ
71
91
71
71
92
94
71
3
71
71
91
92
61
61
62
63

21158-8341
21528-5071
21823-5071
21158-0073
21528-0073
21823-0073
21158-0075
21528-0075
21823-0075
29507-5817
27063-0028
27063-0030
27063-0032
27063-0033
27063-8833
21702-0077
21158-0077
21158-0078
23078-8318
24060-8020
21158-8020
21158-0079
21702-0080
21158-0080
21158-8021
21158-0081
27223-0081
21158-0082
23548-6971
23550-6971
21158-8109
21158-0083
21158-0084
21702-0085
21158-0085
24802-1328
26001-7020
27023-7020
26001-7024
26001-7021
27063-7021
27223-7021
26001-7022
28003-0201
26001-9428
26001-7023
27023-9508
27063-9508
24060-0087
24061-0087
21702-0087
21158-0087

SHAFT

BORE

WIDTH

0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625

1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.182
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.260
1.300
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.575
1.575
1.575
1.575

0.312
0.312
0.312
0.375
0.375
0.500
0.562
0.562
0.312
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.437
0.531
0.562
0.562
0.625
0.690
0.312
0.625
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.375
0.562
0.562
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.562
0.312
0.375
0.375
0.375

MODEL NO. PART NO.

67
68
92
63
76
63F1
63R2
63T2
63
3
61
92
61
62
63
67
68
94
61
62
63
63F1
63F1
63R1
63T2
IG
EQ
63
IG
3
25
92
61
62
63
67
68
63
63R2
63T2
63
61
61
63
67
68
63
63R2
63
62
63
94

21528-0087
21823-0087
27063-0087
21158-0088
26193-0088
23078-5657
23548-6637
23550-6637
21158-8023
28003-0213
24060-9509
27063-9509
24060-0089
21702-0089
21158-0089
21528-0089
21823-0089
27223-0089
24060-0090
21702-0090
21158-0090
23078-7662
23078-5311
23547-7150
23550-7150
29507-4317
24807-2828
21158-4680
29507-4637
28003-0225
25058-6050
27063-6050
24060-0091
21702-0091
21158-0091
21528-0091
21823-0091
21158-0092
23548-6856
23550-6856
21158-8342
24060-0093
24061-0093
21158-0093
21528-0093
21823-0093
21158-0094
23548-8339
21158-0095
21702-0096
21158-0096
27223-0096

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-3

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.625
0.625
0.630
0.630
0.630
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.656
0.667
0.667
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687

1.625
1.625
1.181
1.181
1.181
1.125
1.125
1.125
1.182
1.250
1.250
1.250
1.260
1.375
1.375
1.378
1.500
1.500
1.575
1.575
1.575
1.625
1.625
1.187
1.187
1.102
1.102
1.102
1.181
1.375
1.575
1.575
1.575
0.875
1.062
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.182
1.250
1.250
1.250
1.250
1.250
1.250

0.312
0.750
0.276
0.315
0.315
0.312
0.312
0.375
0.312
0.250
0.312
0.375
0.312
0.312
0.375
0.312
0.312
0.375
0.250
0.312
0.375
0.312
0.375
0.125
0.187
0.275
0.276
0.315
0.276
0.312
0.276
0.562
0.625
0.094
0.187
0.312
0.312
0.312
0.312
0.375
0.375
0.437
0.562
0.562
0.625
0.312
0.312
0.312
0.312
0.312
0.375
0.437

Garlock

MODEL NO. PART NO.

61
IG
92
61
61
62
63
63
63
76
63
63
63
63
63
63
63
63
76
63
63
63
63
71
76
76
92
61
92
62
92
63T2
EQ
71
76
61
63
67
68
62
63
63F1
63R2
63T2
IG
63
62
63
67
68
63
63F1

24060-1251
29502-4266
27063-0048
24060-2280
24062-2280
21702-0097
21158-0097
21158-0098
21158-8025
26193-5085
21158-0099
21158-0100
21158-8026
21158-0101
21158-0102
21158-4793
21158-0103
21158-0104
26193-6099
21158-0105
21158-0106
21158-0107
21158-0108
26001-8379
26193-8356
26193-9856
27063-9856
24060-1754
27063-0064
21702-5105
27063-0066
23550-7405
24801-5416
26001-7025
26193-7505
24060-0109
21158-0109
21528-0109
21823-0109
21702-0110
21158-0110
23078-4908
23548-7299
23550-7299
29507-4724
21158-8028
21702-0111
21158-0111
21528-0111
21823-0111
21158-0112
23078-5041

SHAFT

BORE

WIDTH

0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.687
0.709
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.719
0.745
0.748
0.748
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

1.260
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.500
1.500
1.500
1.500
1.575
1.575
1.625
1.625
1.181
1.250
1.260
1.375
1.375
1.375
1.378
1.500
1.500
1.575
1.625
1.654
1.750
1.828
1.828
1.850
1.875
1.984
1.357
1.260
1.496
0.937
1.000
1.000
1.000
1.062
1.064
1.125
1.125
1.125
1.125
1.125
1.125
1.187
1.250

0.312
0.125
0.312
0.312
0.312
0.312
0.375
0.406
0.312
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.312
0.276
0.312
0.312
0.312
0.312
0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.318
0.276
0.625
0.125
0.109
0.125
0.125
0.187
0.109
0.125
0.187
0.187
0.187
0.234
0.625
0.156
0.125

MODEL NO. PART NO.

63
71
62
63
67
68
63
63
63
63
67
68
63
67
68
67
68
92
63
63
62
63
63
63
63
63
63
63
63
63
62
63
63
63
63
92
92
EQ
71
71
71
91
71
71
71
76
91
92
94
IG
71
71

21158-8029
26001-9758
21702-0113
21158-0113
21528-0113
21823-0113
21158-0114
21158-5238
21158-8343
21158-0115
21528-0115
21823-0115
21158-0116
21528-0117
21823-0117
21528-0119
21823-0119
27063-0074
21158-0121
21158-7753
21702-0123
21158-0123
21158-0124
21158-7763
21158-0125
21158-0126
21158-0127
21158-0129
21158-8032
21158-0131
21702-0133
21158-0133
21158-8110
21158-0135
21158-0137
27063-1871
27063-0118
24801-5223
26001-7826
26001-6108
26001-7027
27023-7027
26001-7028
26001-7029
26001-7030
26193-6113
27023-6113
27063-6113
27223-6114
29507-5283
26001-7031
26001-7032

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-4

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.260
1.260
1.260
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.378
1.379
1.437
1.499
1.499
1.500
1.500
1.500

0.250
0.250
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.437
0.562
0.562
0.562
0.312
0.312
0.406
0.250
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.406
0.406
0.437
0.562
0.562
0.562
0.312
0.625
0.690
0.250
0.250
0.625
0.312
0.312
0.312

MODEL NO. PART NO.

3
25
26
71
94
61
61
62
63
66
67
68
94
63
67
68
63F1
63R2
63T2
67R2
63
66
63
3
26R1
71
92
61
61
62
63
66
67
68
94
62
63
63
66
63F1
63R1
63R2
63T2
63
IG
EQ
71
3
EQ
61
61
62

28003-0427
25058-7033
24600-7033
26001-7033
27223-7033
24060-0139
24061-0139
21702-0139
21158-0139
21527-0139
21528-0139
21823-0139
27223-0139
21158-0140
21528-0140
21823-0140
23078-6612
23548-6720
23550-6720
23683-6720
21158-8033
21527-8033
21158-3870
28003-0446
24620-8881
26001-7034
27063-7034
24060-0141
24061-0141
21702-0141
21158-0141
21527-0141
21528-0141
21823-0141
27223-0141
21702-0142
21158-0142
21158-4605
21527-4605
23078-6927
23547-4754
23548-4754
23550-4754
21158-8344
29507-5384
24807-1786
26001-7035
28003-0458
24802-1405
24060-0143
24061-0143
21702-0143

SHAFT

BORE

WIDTH

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750

1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.575
1.575
1.575
1.575
1.575
1.575
1.624
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.654
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.828
1.828
1.828
1.828
1.828
1.850
1.851
1.851
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.984

0.312
0.312
0.312
0.312
0.375
0.375
0.437
0.562
0.562
0.250
0.312
0.312
0.375
0.562
0.625
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.562
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.687
0.375
0.375
0.375
0.375
0.437
0.312
0.375
0.375
0.312
0.375
0.375
0.375
0.375
0.625
0.687
0.375

MODEL NO. PART NO.

63
66
67
68
62
63
63F1
63R1
63T2
92
63
66
63
63T2
EQ
3
26
61
62
63
66
67
68
62
63
63T2
63
61
61
62
63
66
67
68
63
63T2
63
66
67
68
63
63
63
94
61
63
66
67
68
IG
63T2
63

21158-0143
21527-0143
21528-0143
21823-0143
21702-0144
21158-0144
23078-6985
23547-7184
23550-7184
27063-6289
21158-0145
21527-0145
21158-0146
23550-5214
24801-3964
28003-0488
24600-9535
24060-0147
21702-0147
21158-0147
21527-0147
21528-0147
21823-0147
21702-0148
21158-0148
23550-6977
21158-8035
24060-1247
24060-0149
21702-0149
21158-0149
21527-0149
21528-0149
21823-0149
21158-0150
23550-2577
21158-0151
21527-0151
21528-0151
21823-0151
21158-0152
21158-4935
21158-6120
27223-6120
24060-1257
21158-0153
21527-0153
21528-0153
21823-0153
29507-4551
23550-5248
21158-0155

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-5

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.750
0.750
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.781
0.785
0.787
0.787

1.984
1.984
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.260
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.500
1.500
1.500
1.500
1.500
1.500
1.575
1.625
1.625
1.625
1.625
1.625
1.654
1.750
1.750
1.750
1.828
1.828
1.850
1.850
1.851
1.875
1.875
1.984
1.750
1.181
1.260

0.375
0.437
0.187
0.250
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.562
0.562
0.312
0.250
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.625
0.312
0.312
0.312
0.312
0.375
0.562
0.562
0.312
0.125
0.312
0.312
0.312
0.375
0.312
0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.312
0.375
0.437
0.375
0.625
0.276
0.276

Garlock

MODEL NO. PART NO.

66
63
71
92
62
63
67
68
63
67
68
63T2
67T2
63
76
62
63
67
68
62
63
67
68
IG
63
63
67
68
63
63T2
67T2
63
71
63
67
68
63
63
63
67
68
63
63
63
94
63
63
63
63
IG
92
92

21527-0155
21158-0156
26001-7705
27063-5965
21702-0157
21158-0157
21528-0157
21823-0157
21158-0158
21528-0158
21823-0158
23550-8562
23621-8562
21158-8036
26193-9991
21702-0159
21158-0159
21528-0159
21823-0159
21702-0160
21158-0160
21528-0160
21823-0160
29507-5322
21158-4965
21158-0161
21528-0161
21823-0161
21158-0162
23550-6662
23621-6662
21158-0163
26001-7619
21158-0165
21528-0165
21823-0165
21158-0166
21158-8038
21158-0167
21528-0167
21823-0167
21158-0169
21158-0170
21158-7198
27223-7198
21158-7846
21158-0171
21158-0172
21158-0173
29507-5282
27063-0120
27063-0154

SHAFT

BORE

WIDTH

0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.787
0.807
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.844
0.844
0.844
0.844
0.844
0.844
0.844
0.844
0.844
0.844

1.260
1.378
1.378
1.378
1.575
1.575
1.575
1.654
1.654
1.850
2.047
2.165
1.062
1.066
1.125
1.236
1.237
1.250
1.250
1.250
1.250
1.250
1.260
1.375
1.375
1.377
1.378
1.500
1.500
1.575
1.575
1.575
1.625
1.625
1.654
1.750
1.750
1.828
1.850
1.875
1.984
1.984
1.375
1.378
1.500
1.575
1.625
1.654
1.750
1.828
1.850
1.984

0.690
0.276
0.315
0.625
0.276
0.625
0.750
0.276
0.625
0.276
0.394
0.625
0.125
0.125
0.187
0.187
0.155
0.250
0.312
0.312
0.375
0.375
0.312
0.312
0.375
0.156
0.312
0.312
0.375
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.437
0.375
0.375
0.375
0.375
0.437
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.437
0.375
0.375

MODEL NO. PART NO.

EQ
92
61
IG
92
EQ
IG
92
EQ
92
92
EQ
71
71
76
76
76
92
62
63
63
92
63
63
63
71
63
63
63
63
94
63
62
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63

24807-1905
27063-0164
24060-1760
29507-4868
27063-0184
24802-4596
29502-4448
27063-0188
24801-5325
27063-0194
27063-0196
24802-2028
26001-7037
26001-7038
26193-6125
26193-7802
26193-5546
27063-6983
21702-0175
21158-0175
21158-0176
27063-0176
21158-8039
21158-0177
21158-0178
26001-9413
21158-8345
21158-0179
21158-0180
21158-0181
27223-0181
21158-0182
21702-0183
21158-0183
21158-8041
21158-0185
21158-0186
21158-0187
21158-8042
21158-0189
21158-0191
21158-0192
21158-0193
21158-8346
21158-0195
21158-0197
21158-0199
21158-8044
21158-0201
21158-0204
21158-8045
21158-0207

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-6

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.844
0.844
0.866
0.866
0.866
0.866
0.866
0.866
0.866
0.866
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875

2.047
2.062
1.259
1.378
1.575
1.575
1.575
1.850
1.969
1.969
1.125
1.187
1.250
1.250
1.250
1.250
1.255
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.378
1.437
1.499
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500

0.312
0.375
0.275
0.276
0.276
0.315
0.315
0.276
0.625
0.750
0.125
0.156
0.187
0.187
0.625
0.690
0.125
0.125
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.406
0.406
0.437
0.562
0.625
0.690
0.312
0.312
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.562

MODEL NO. PART NO.

63
63
76
26R1
92
61
61
92
EQ
IG
71
71
71
76
IG
EQ
71
71
3
61
92
61
62
63
66
67
68
92
26
63
63
66
63F1
63T2
IG
EQ
63
66
71
3
92
61
62
63
66
67
68
94
26
62
63
63R1

21158-8046
21158-0211
26193-9855
24620-0209
27063-0198
24060-1470
24064-1470
27063-0206
24802-3088
29502-5794
26001-7041
26001-7042
26001-6133
26193-6133
29507-4106
24807-3196
26001-8000
26001-7045
28003-0678
24060-9515
27063-9515
24060-0213
21702-0213
21158-0213
21527-0213
21528-0213
21823-0213
27063-0213
24600-1275
21158-0214
21158-5502
21527-5502
23078-6523
23550-6500
29507-2182
24807-2993
21158-8347
21527-8347
26001-7046
28003-0687
27063-9489
24060-0215
21702-0215
21158-0215
21527-0215
21528-0215
21823-0215
27223-0215
24600-0784
21702-0216
21158-0216
23547-4700

SHAFT

BORE

WIDTH

0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875

1.500
1.500
1.500
1.570
1.575
1.575
1.575
1.575
1.575
1.575
1.624
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.654
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.828
1.828
1.828
1.828
1.828
1.828
1.828
1.828
1.851
1.875
1.875
1.875
1.875
1.875
1.875
1.875

0.562
0.625
0.690
0.312
0.187
0.312
0.312
0.312
0.312
0.375
0.250
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.500
0.562
0.625
0.625
0.625
0.690
0.750
0.312
0.312
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.625
0.625
0.375
0.375
0.375
0.375
0.437
0.437
0.438
0.687
0.375
0.312
0.312
0.375
0.375
0.375
0.375
0.437

MODEL NO. PART NO.

63R2
IG
EQ
94
76
63
66
67
68
63
3
62
63
66
67
68
26
63
61
63R1
EQ
IG
IG
EQ
IG
63
61
63
66
67
68
63
63F1
EQ
EQ
EQ
63
66
67
68
62
63
26
63R2
63
26
61
63
66
67
68
62

23548-4700
29507-4339
24807-1955
27223-7465
26193-8952
21158-0217
21527-0217
21528-0217
21823-0217
21158-0218
28003-0715
21702-0219
21158-0219
21527-0219
21528-0219
21823-0219
24600-1277
21158-0220
24062-1265
23547-6476
24802-1012
29507-1012
29507-4123
24807-2861
29502-4123
21158-8048
24060-1268
21158-0221
21527-0221
21528-0221
21823-0221
21158-0222
23078-0222
24801-0756
24801-1090
24802-1090
21158-0223
21527-0223
21528-0223
21823-0223
21702-0224
21158-0224
24600-1276
23548-5401
21158-4748
24600-4657
24060-1271
21158-0225
21527-0225
21528-0225
21823-0225
21702-0226

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-7

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.906
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937

1.875
1.875
1.875
1.875
1.875
1.937
1.937
1.984
1.984
1.984
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.047
2.062
2.062
2.062
2.062
2.750
1.500
1.500
1.500
1.500
1.575
1.575
1.575
1.625
1.625
1.654
1.750
1.850
1.875
1.984
2.000
2.047
1.187
1.375
1.375
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.575
1.575

0.437
0.500
0.625
0.625
0.750
0.625
0.625
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.500
0.625
0.625
0.375
0.375
0.375
0.375
0.375
0.750
0.312
0.312
0.375
0.625
0.312
0.312
0.375
0.312
0.437
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.125
0.312
0.312
0.312
0.312
0.375
0.562
0.562
0.562
0.625
0.690
0.312
0.312

Garlock

MODEL NO. PART NO.

63
EQ
EQ
IG
IG
EQ
EQ
63
66
63
63
66
67
68
EQ
EQ
EQ
63
63
66
67
68
IG
62
63
63
IG
62
63
63
63
63
63
63
63
63
63
63
63
71
62
76
62
63
63
63R1
63T2
66T2
IG
EQ
62
63

21158-0226
24801-0625
24802-2711
29507-2711
29502-4267
24801-1403
24802-1403
21158-0227
21527-0227
21158-0228
21158-0229
21527-0229
21528-0229
21823-0229
24801-0850
24801-1765
24802-1765
21158-4849
21158-0231
21527-0231
21528-0231
21823-0231
29502-4731
21702-0233
21158-0233
21158-0234
29507-5435
21702-0235
21158-0235
21158-0236
21158-0237
21158-5434
21158-8050
21158-0239
21158-8051
21158-0243
21158-0245
21158-0247
21158-8052
26001-7047
21702-6233
26193-6233
21702-0251
21158-0251
21158-0252
23547-4819
23550-4819
23728-4819
29507-4122
24807-2563
21702-0253
21158-0253

SHAFT

BORE

WIDTH

0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.937
0.938
0.938
0.938
0.938
0.938
0.945
0.945
0.945
0.945
0.945
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969

1.625
1.625
1.625
1.625
1.625
1.654
1.687
1.750
1.750
1.750
1.828
1.828
1.837
1.850
1.875
1.875
1.875
1.984
2.000
2.000
2.047
2.048
2.062
2.062
1.500
1.500
1.938
1.938
2.048
1.378
1.575
1.732
1.732
1.929
1.499
1.500
1.500
1.500
1.500
1.500
1.575
1.625
1.625
1.625
1.625
1.625
1.654
1.686
1.750
1.750
1.750
1.750

0.312
0.312
0.375
0.437
0.562
0.312
0.625
0.375
0.437
0.687
0.375
0.437
0.625
0.375
0.375
0.375
0.625
0.375
0.375
0.437
0.375
0.312
0.375
0.437
0.312
0.375
0.625
0.750
0.625
0.276
0.276
0.625
0.625
0.472
0.690
0.312
0.312
0.312
0.375
0.375
0.312
0.312
0.312
0.312
0.312
0.375
0.312
0.312
0.312
0.375
0.375
0.375

MODEL NO. PART NO.

62
63
63
63
63R2
63
EQ
63
63
63R2
63
63
EQ
63
63
76
63R2
63
63
63
63
94
63
63
66
26
IG
IG
IG
92
92
EQ
EQ
26R1
EQ
63
67
68
62
63
63
62
63
67
68
63
63
63
92
63
67
68

21702-0255
21158-0255
21158-0256
21158-0264
23548-4721
21158-8054
24802-1115
21158-0257
21158-0258
23548-9624
21158-0259
21158-0260
24801-3632
21158-8055
21158-0261
26193-0261
23548-5653
21158-0263
21158-0265
21158-0266
21158-5046
27223-6537
21158-0267
21158-0268
21527-0251
24600-0785
29507-2714
29502-4270
29507-4533
27063-0209
27063-0210
24801-3263
24802-3263
24620-3712
24807-1363
21158-0269
21528-0269
21823-0269
21702-0270
21158-0270
21158-0271
21702-0273
21158-0273
21528-0273
21823-0273
21158-0274
21158-8056
21158-0282
27063-9009
21158-0275
21528-0275
21823-0275

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-8

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.969
0.983
0.983
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
1.000
1.000
1.000
1.000
1.000

1.750
1.828
1.828
1.850
1.875
1.984
2.000
2.000
2.000
2.048
2.048
2.062
2.062
2.062
2.062
2.441
1.983
1.983
1.375
1.378
1.378
1.457
1.486
1.496
1.496
1.500
1.653
1.654
1.654
1.750
1.772
1.850
1.850
1.850
1.850
1.850
1.850
1.890
1.929
1.968
1.969
1.969
2.047
2.047
2.048
2.048
2.062
1.250
1.250
1.312
1.375
1.375

0.437
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.687
0.375
0.625
0.750
0.187
0.276
0.315
0.276
0.625
0.276
0.690
0.375
0.315
0.276
0.276
0.690
0.625
0.276
0.375
0.375
0.625
0.625
0.625
0.750
0.625
0.709
0.625
0.625
0.276
0.500
0.375
0.375
0.375
0.109
0.125
0.125
0.187
0.187

MODEL NO. PART NO.

63
63
63
63
63
63
26
62
63
63
94
62
63
63
63R2
94
IG
IG
92
92
61
92
IG
26R1
EQ
61
61
92
94
EQ
IG
92
61
63
EQ
EQ
IG
IG
IG
EQ
EQ
EQ
92
EQ
62
63
92
71
71
71
76
92

21158-0276
21158-0277
21158-0278
21158-4802
21158-0279
21158-0281
24600-1282
21702-0283
21158-0283
21158-5937
27223-5937
21702-0285
21158-0285
21158-0286
23548-7100
27223-7779
29507-5171
29502-5049
27063-8978
27063-0212
24060-1478
27063-0230
29507-5205
24620-0280
24807-5752
24060-2241
24060-1761
27063-0232
27223-2545
24807-5379
29519-5736
27063-0250
24060-6859
21158-6859
24801-4563
24802-4563
29507-4563
29502-5534
29507-5586
24801-1978
24801-5593
24802-5593
27063-0254
24801-0773
21702-4687
21158-4687
27063-9517
26001-6148
26001-7049
26001-6151
26193-9518
27063-9518

SHAFT

BORE

WIDTH

1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000

1.437
1.499
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.501
1.562
1.562
1.575
1.575
1.575
1.624
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.654
1.686
1.687
1.750
1.750
1.750

0.250
0.250
0.125
0.188
0.250
0.250
0.281
0.312
0.312
0.312
0.312
0.312
0.312
0.313
0.375
0.375
0.375
0.375
0.437
0.562
0.562
0.625
0.690
0.312
0.187
0.187
0.312
0.375
0.375
0.250
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.437
0.562
0.562
0.562
0.312
0.312
0.625
0.250
0.250
0.312

MODEL NO. PART NO.

76
3
71
71
61
92
25
61
62
63
67
68
94
26
61
61
62
63
63F1
63R2
63T2
IG
EQ
94
71
76
63
61
63
3
61
76
61
62
63
67
68
61
61
61
61
63
63F1
63R1
63R2
63T2
63
63
IG
61
71
62

26193-7510
28003-1004
26001-7052
26001-8873
24063-5306
27063-5306
25058-7293
24060-0287
21702-0287
21158-0287
21528-0287
21823-0287
27223-0287
24600-0287
24060-0288
24062-0288
21702-0288
21158-0288
23078-6755
23548-6694
23550-6694
29507-2684
24807-2688
27223-5314
26001-6156
26193-6156
21158-0289
24060-0290
21158-0290
28003-1020
24060-9490
26193-9490
24060-0291
21702-0291
21158-0291
21528-0291
21823-0291
24060-0292
24061-0292
24062-0292
24064-0292
21158-0292
23078-6524
23547-6477
23548-6477
23550-6477
21158-8057
21158-0310
29507-5412
24061-7055
26001-7055
21702-9808

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-9

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000

1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.752
1.828
1.828
1.828
1.828
1.828
1.851
1.851
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.983
1.984
1.984
1.984
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.625
0.625
0.625
0.625
0.687
0.687
0.690
0.750
0.250
0.375
0.375
0.375
0.437
0.687
0.250
0.375
0.312
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.625
0.625
0.687
0.500
0.375
0.437
0.437
0.250
0.312
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.625
0.625

Garlock

MODEL NO. PART NO.

26
61
61
62
63
67
68
63
63
63F1
63R1
EQ
EQ
IG
63R1
63R2
EQ
IG
3
63
67
68
63
63R2
94
63
63
61
62
63
67
68
63
EQ
EQ
EQ
63R2
63
63
63
67
92
61
62
63
67
68
62
63
EQ
63F1
EQ

24600-1283
24060-0293
24061-0293
21702-0293
21158-0293
21528-0293
21823-0293
21158-0294
21158-6470
23078-6470
23547-9417
24801-3398
24802-3398
29507-3398
23547-7215
23548-7215
24807-2695
29502-4182
28003-1028
21158-0295
21528-0295
21823-0295
21158-0296
23548-6580
27223-9967
21158-6906
21158-9345
24060-0297
21702-0297
21158-0297
21528-0297
21823-0297
21158-0298
24801-1009
24801-1754
24802-1754
23548-4887
21158-5295
21158-0299
21158-0300
21528-0300
27063-6100
24060-1272
21702-0301
21158-0301
21528-0301
21823-0301
21702-0302
21158-0302
24801-0627
23078-5703
24801-1083

SHAFT

BORE

WIDTH

1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.024
1.024
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.060
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062

2.000
2.000
2.000
2.000
2.000
2.047
2.047
2.062
2.062
2.062
2.062
2.062
2.125
2.125
2.125
2.125
2.441
2.441
1.654
1.850
1.575
1.575
1.625
1.625
1.625
1.654
1.750
1.850
1.875
1.984
2.000
2.047
2.062
1.625
1.499
1.500
1.500
1.562
1.575
1.575
1.575
1.624
1.625
1.625
1.625
1.625
1.625
1.654
1.656
1.686
1.750
1.750

0.625
0.625
0.687
0.687
0.750
0.312
0.375
0.375
0.375
0.375
0.375
0.437
0.375
0.500
0.625
0.625
0.625
0.750
0.276
0.276
0.312
0.375
0.312
0.312
0.375
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.625
0.312
0.625
0.690
0.125
0.312
0.312
0.375
0.625
0.312
0.312
0.312
0.375
0.375
0.312
0.690
0.312
0.375
0.375

MODEL NO. PART NO.

EQ
IG
63F1
63T2
IG
61
63
26
63
67
68
63
61
EQ
EQ
EQ
EQ
IG
92
92
63
63
62
63
63
63
63
63
63
63
63
63
63
IG
63
IG
EQ
71
63
66
63
IG
62
63
66
26
63
63
EQ
63
62
63

24802-1083
29519-1083
23078-7186
23550-7186
29502-4138
24060-2503
21158-6654
24600-0303
21158-0303
21528-0303
21823-0303
21158-0304
24060-1274
24801-0857
24801-1357
24802-1357
24802-2160
29500-4820
27063-0262
27063-0272
21158-0305
21158-0306
21702-0307
21158-0307
21158-0308
21158-8059
21158-0309
21158-8060
21158-0313
21158-0315
21158-0317
21158-8061
21158-0319
29507-4333
21158-0314
29507-5685
24807-5796
26001-7056
21158-0321
21527-0321
21158-0322
29507-4121
21702-0323
21158-0323
21527-0323
24600-1285
21158-0324
21158-8062
24807-2329
21158-0311
21702-0325
21158-0325

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-10

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.062
1.063
1.063
1.063
1.063
1.063
1.063
1.063
1.087
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.093
1.100
1.102
1.102
1.102
1.102

1.750
1.750
1.812
1.828
1.828
1.828
1.828
1.850
1.875
1.875
1.875
1.979
1.984
1.984
1.984
2.000
2.000
2.000
2.047
2.062
2.062
2.062
2.062
1.624
1.625
1.643
1.750
1.875
1.938
2.063
1.686
1.625
1.625
1.625
1.654
1.750
1.750
1.828
1.828
1.850
1.875
1.984
2.000
2.000
2.047
2.062
2.062
2.625
1.496
1.575
1.575
1.850

0.375
0.437
0.625
0.375
0.375
0.437
0.453
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.500
0.375
0.375
0.437
0.375
0.375
0.375
0.437
0.437
0.690
0.250
0.625
0.375
0.625
0.625
0.750
0.250
0.312
0.312
0.375
0.312
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.375
0.375
0.375
0.375
0.375
0.750
0.276
0.276
0.394
0.394

MODEL NO. PART NO.

66
63
EQ
63
66
63
63F1
63
63
66
63
63
63
66
63
63
66
63
63
63
66
63
66
EQ
61
IG
61
IG
EQ
IG
76
63
66
62
63
63
66
63
66
63
63
63
63
66
63
63
66
IG
92
92
61
61

21527-0325
21158-0326
24802-1110
21158-0327
21527-0327
21158-0328
23078-5791
21158-8063
21158-0329
21527-0329
21158-0330
21158-8644
21158-0331
21527-0331
21158-3871
21158-0333
21527-0333
21158-0334
21158-8064
21158-0335
21527-0335
21158-0336
21527-0336
24807-3907
24060-1281
29507-4206
24060-0325
29507-4711
24801-3796
29502-4271
26193-6642
21158-0337
21527-0337
21702-0338
21158-7599
21158-0339
21527-0339
21158-0341
21527-0341
21158-7173
21158-0344
21158-0346
21158-0347
21527-0347
21158-8065
21158-0349
21527-0349
29500-4502
27063-0280
27063-0284
24060-2715
24060-5562

SHAFT

BORE

WIDTH

1.102
1.103
1.108
1.114
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125

1.850
1.850
1.850
1.375
1.375
1.375
1.437
1.500
1.500
1.562
1.562
1.624
1.624
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.654
1.654
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.781
1.801
1.828
1.828
1.828
1.828
1.828

0.394
0.690
0.375
0.125
0.109
0.125
0.266
0.187
0.625
0.625
0.690
0.250
0.690
0.250
0.250
0.312
0.312
0.312
0.312
0.312
0.313
0.375
0.375
0.375
0.437
0.562
0.562
0.625
0.690
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.562
0.625
0.687
0.687
0.690
0.437
0.690
0.375
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

61
EQ
63
71
71
71
92
76
IG
IG
EQ
3
EQ
71
92
62
63
66
67
68
26
61
63
66
61
63R2
63T2
IG
EQ
63
66
25
26
61
62
63
66
67
68
63
63R1
IG
63R1
63T2
EQ
63
EQ
26
62
63
66
67

24064-5562
24807-2842
21158-5562
26001-9643
26001-6162
26001-7057
27063-6167
26193-7512
29507-5207
29507-4334
24807-2852
28003-1113
24807-1352
26001-6169
27063-6169
21702-0351
21158-0351
21527-0351
21528-0351
21823-0351
24600-0351
24060-0352
21158-0352
21527-0352
24062-1307
23548-6452
23550-6452
29507-2273
24807-2829
21158-8066
21527-8066
25058-0353
24600-0353
24060-0353
21702-0353
21158-0353
21527-0353
21528-0353
21823-0353
21158-0354
23547-7208
29507-4184
23547-6857
23550-6857
24807-2994
21158-9564
24807-3877
24600-1288
21702-0355
21158-0355
21527-0355
21528-0355

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-11

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125

1.828
1.828
1.850
1.850
1.851
1.855
1.874
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.876
1.876
1.984
1.984
1.984
1.984
1.984
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.001
2.001
2.001
2.001
2.043
2.047
2.050
2.062
2.062

0.375
0.437
0.312
0.375
0.437
0.625
0.250
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.625
0.687
0.690
0.750
0.625
0.625
0.375
0.375
0.437
0.438
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.625
0.625
0.625
0.687
0.750
0.375
0.500
0.500
0.625
0.625
0.375
0.750
0.375
0.375

Garlock

MODEL NO. PART NO.

68
63
63
63
63
IG
3
26
61
61
61
62
63
66
67
68
63
IG
63T2
EQ
IG
EQ
IG
63
66
63
26
63
61
62
63
66
67
68
94
63
67
68
EQ
IG
IG
63T2
IG
26
EQ
EQ
EQ
EQ
63
IG
26
63

21823-0355
21158-0356
21158-7650
21158-4813
21158-5891
29507-4840
28003-1128
24600-1394
24060-0357
24061-0357
24062-0357
21702-0357
21158-0357
21527-0357
21528-0357
21823-0357
21158-0358
29507-5394
23550-6688
24807-2968
29502-4322
24802-1152
29507-1152
21158-3872
21527-3872
21158-3873
24600-1289
21158-3874
24060-0359
21702-0359
21158-0359
21527-0359
21528-0359
21823-0359
27223-0359
21158-0360
21528-0360
21823-0360
24801-0988
29507-0988
29519-0988
23550-6466
29502-4108
24600-0842
24801-0765
24802-0765
24802-0988
24802-5371
21158-8067
29502-5071
24600-0814
21158-0361

SHAFT

BORE

WIDTH

1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.125
1.127
1.142
1.145
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156
1.156

2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.125
2.125
2.125
2.125
2.188
2.250
2.250
2.250
2.250
2.250
2.375
2.437
2.441
2.441
2.441
2.441
2.441
2.750
2.835
2.844
3.150
3.192
2.000
1.575
2.000
1.575
1.828
1.875
1.875
1.875
1.875
1.875
1.984
2.000
2.000
2.000
2.047
2.062
2.062
2.106
2.125
2.250
2.250
2.375
2.441

0.375
0.375
0.375
0.437
0.437
0.625
0.750
0.375
0.625
0.625
0.750
0.625
0.375
0.375
0.625
0.625
0.625
0.750
0.625
0.281
0.375
0.625
0.750
0.750
0.375
0.375
0.500
0.625
0.500
0.750
0.250
0.750
0.312
0.437
0.375
0.375
0.375
0.625
0.690
0.375
0.375
0.625
0.690
0.375
0.375
0.437
0.437
0.375
0.375
0.687
0.375
0.375

MODEL NO. PART NO.

66
67
68
62
63
EQ
IG
66
EQ
EQ
IG
EQ
61
66
EQ
EQ
IG
IG
EQ
94
94
EQ
IG
IG
26
76
26
EQ
26
IG
61
IG
76
63
63
67
68
IG
EQ
63
63
IG
IG
63
63
63
63
63
63
63R1
63
63

21527-0361
21528-0361
21823-0361
21702-0362
21158-0362
24801-1920
29502-5470
21527-7242
24801-0832
24802-0832
29502-4139
24802-4415
24060-7246
21527-7246
24801-0815
24802-0815
29502-0815
29502-5039
24802-5573
27223-9274
27223-6176
24802-2859
29500-4181
29502-4181
24600-3885
26193-4701
24600-1290
24802-1091
24600-0817
29502-4402
24060-2218
29502-5517
26193-9038
21158-5491
21158-0363
21528-0363
21823-0363
29507-5112
24807-1025
21158-0365
21158-0367
29507-5812
24807-5797
21158-7914
21158-0369
21158-0370
21158-0372
21158-0374
21158-0377
23547-8514
21158-0380
21158-3875

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-12

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.156
1.161
1.168
1.171
1.173
1.177
1.180
1.180
1.180
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.185
1.185
1.187
1.187
1.187
1.187
1.187
1.187
1.187

2.835
2.000
2.437
2.250
2.441
2.500
2.000
2.180
2.835
1.575
1.575
1.625
1.654
1.654
1.654
1.654
1.683
1.683
1.772
1.772
1.850
1.850
1.850
1.850
1.850
1.890
1.968
1.968
2.030
2.047
2.047
2.181
2.181
2.211
2.350
2.358
2.362
2.362
2.441
2.441
2.500
2.835
2.875
2.442
2.442
1.437
1.625
1.828
1.828
1.828
1.850
1.875

0.375
0.625
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.276
0.276
0.690
0.276
0.315
0.315
0.625
0.250
0.250
0.315
0.625
0.276
0.276
0.375
0.375
0.690
0.315
0.276
0.434
0.625
0.276
0.394
0.625
0.625
0.625
0.625
0.625
0.500
0.750
0.276
0.750
0.375
0.315
0.500
0.625
0.750
0.125
0.250
0.375
0.375
0.687
0.375
0.375

MODEL NO. PART NO.

94
EQ
IG
IG
IG
EQ
IG
IG
IG
61
92
EQ
92
61
61
IG
76
92
92
IG
61
92
61
63
EQ
92
26
26R1
EQ
92
61
EQ
IG
EQ
EQ
EQ
EQ
IG
92
IG
26
92
EQ
EQ
IG
71
91
63
66
63T2
63
62

27223-6738
24802-3772
29502-5511
29502-5526
29502-4720
24802-4342
29502-5149
29502-5166
29502-4422
24060-0312
27063-0312
24807-2806
27063-0316
24060-1763
24061-1763
29507-4920
26193-8461
27063-8461
27063-0318
29507-5204
24060-0320
27063-0320
24060-9342
21158-9342
24807-3638
27063-0332
24600-0378
24620-0379
24801-5446
27063-0340
24060-2803
24802-3388
29507-3388
24802-1499
24802-2476
24802-1199
24801-1122
29502-4684
27063-0342
29502-5584
24600-0393
27063-0348
24801-1084
24802-2857
29502-4336
26001-7061
27023-6279
21158-3876
21527-3876
23550-9748
21158-6659
21702-0383

SHAFT

BORE

WIDTH

1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.187
1.188
1.188

1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.984
1.984
1.984
1.984
1.984
2.000
2.000
2.000
2.000
2.000
2.000
2.048
2.048
2.048
2.062
2.062
2.062
2.062
2.062
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.441
2.441
2.441
2.441
2.441
2.500
2.835
2.835
2.835
1.750
1.750

0.375
0.375
0.437
0.594
0.687
0.687
0.687
0.375
0.375
0.375
0.437
0.500
0.375
0.375
0.375
0.437
0.437
0.594
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.687
0.375
0.375
0.437
0.375
0.375
0.437
0.500
0.500
0.375
0.437
0.500
0.687
0.625
0.625
0.750
0.250
0.375
0.375
0.375
0.625
0.500
0.375
0.375
0.375
0.312
0.375

MODEL NO. PART NO.

63
66
63
63F1
63R1
63R2
63T2
62
63
66
63
63
62
63
66
62
63
63F1
62
63
66
63
66
62
63
63R1
63
66
63
63
66
63
26
63
63
63
63
63R2
EQ
EQ
IG
71
26R1
63
94
EQ
63
26R1
63
94
61
61

21158-0383
21527-0383
21158-0384
23078-7341
23547-8187
23548-8187
23550-8187
21702-0385
21158-0385
21527-0385
21158-0386
21158-5656
21702-0387
21158-0387
21527-0387
21702-0388
21158-0388
23078-6993
21702-3877
21158-3877
21527-3877
21158-0389
21527-0389
21702-0390
21158-0390
23547-9585
21158-0394
21527-0394
21158-0395
21158-0397
21527-0397
21158-0398
24600-1431
21158-0399
21158-0400
21158-0401
21158-0402
23548-7333
24802-5434
24802-5434
29502-5007
26001-7060
24620-4620
21158-4600
27223-4600
24802-1850
21158-6011
24620-4549
21158-4597
27223-4597
24060-1319
24060-2334

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-13

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.200
1.203
1.219
1.219
1.219
1.219
1.219
1.219
1.219
1.235
1.235
1.241
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250

1.875
1.875
1.875
2.000
2.000
2.000
2.188
2.250
2.358
2.000
2.048
1.984
2.000
2.047
2.048
2.125
2.250
2.437
2.000
2.000
2.253
1.500
1.625
1.625
1.625
1.687
1.687
1.687
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.752
1.874
1.875
1.875
1.875
1.875
1.875
1.984
1.984
1.984
1.984
1.984
1.984
1.984
1.984
1.984

0.312
0.375
0.375
0.375
0.750
0.750
0.750
0.750
0.625
0.750
0.187
0.375
0.375
0.375
0.187
0.437
0.375
0.375
0.625
0.625
0.750
0.125
0.187
0.187
0.250
0.187
0.625
0.690
0.250
0.250
0.250
0.266
0.375
0.375
0.625
0.690
0.250
0.250
0.312
0.375
0.375
0.688
0.690
0.250
0.375
0.375
0.375
0.437
0.437
0.500
0.594
0.687

Garlock

MODEL NO. PART NO.

61
26
61
61
IG
IG
IG
IG
EQ
IG
76
63
63
63
76
63
63
63
EQ
EQ
IG
71
71
76
92
76
IG
EQ
26
61
71
76
61
61
IG
EQ
3
3
61
61
63
63T2
EQ
92
62
63
66
62
63
63
63F1
63T2

24060-1325
24600-0383
24061-0383
24060-0387
29500-4559
29502-4559
29502-4272
29500-4538
24802-4653
29502-5148
26193-7513
21158-0403
21158-0405
21158-8068
26193-7514
21158-0413
21158-0415
21158-0421
24801-2698
24802-2698
29502-5689
26001-7062
26001-6183
26193-6183
27063-9524
26193-7516
29507-3534
24807-3622
24600-5239
24060-5239
26001-5239
26193-6186
24060-8887
24062-8887
29507-4340
24807-1782
28003-1224
28003-1232
24060-1337
24060-5704
21158-5704
23550-1452
24807-2996
27063-9525
21702-0424
21158-0424
21527-0424
21702-0425
21158-0425
21158-0426
23078-8312
23550-7595

SHAFT

BORE

WIDTH

1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250

2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.047
2.047
2.062
2.062
2.062
2.062
2.062
2.063
2.106
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250

0.250
0.250
0.250
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.594
0.625
0.625
0.625
0.687
0.687
0.687
0.750
0.375
0.375
0.375
0.375
0.375
0.437
0.687
0.312
0.375
0.250
0.312
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.625
0.625
0.687
0.687
0.312
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500

MODEL NO. PART NO.

3
76
92
25
26
61
61
62
63
66
67
63
EQ
63F1
EQ
EQ
IG
63R1
63R2
63T2
IG
63
66
62
63
66
63
63T2
61
63
3
61
26
61
63
66
63
63
EQ
EQ
EQ
63R1
63TB
61
25
61
62
63
66
63
26
62

28003-1246
26193-7518
27063-7518
25058-0427
24600-2128
24060-0427
24064-0427
21702-0427
21158-0427
21527-0427
21528-0427
21158-0428
24801-0798
23078-7390
24801-1215
24802-1215
29507-1215
23547-6745
23548-6745
23550-6745
29502-4185
21158-7852
21527-7852
21702-0430
21158-0430
21527-0430
21158-0431
23550-6624
24060-1338
21158-0433
28003-1262
24060-1343
24600-1295
24060-0436
21158-0436
21527-0436
21158-0437
21158-0438
24801-1048
24801-1932
24802-1932
23547-6674
23549-6674
24060-1344
25058-0439
24060-0439
21702-0439
21158-0439
21527-0439
21158-0440
24600-0631
21702-0441

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-14

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.250
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.260
1.266
1.281
1.281
1.281
1.281
1.281
1.281
1.281
1.281

2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.437
2.438
2.438
2.500
2.835
2.875
2.875
3.125
3.150
1.654
1.693
1.772
1.850
1.850
1.850
2.047
2.047
2.126
2.165
2.048
1.984
1.984
2.000
2.000
2.047
2.062
2.106
2.125

0.500
0.625
0.625
0.687
0.687
0.687
0.690
0.750
0.750
0.375
0.375
0.375
0.437
0.500
0.594
0.625
0.625
0.687
0.687
0.375
0.375
0.375
0.437
0.500
0.687
0.438
0.750
0.375
0.375
0.625
0.750
0.750
0.750
0.625
0.394
0.315
0.276
0.315
0.625
0.276
0.354
0.394
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500

MODEL NO. PART NO.

63
EQ
EQ
63R1
63R2
63T2
EQ
IG
IG
61
63
66
63
63
63F1
EQ
EQ
63R2
63T2
62
63
66
63
63
63R1
26
IG
25
94
EQ
IG
IG
IG
IG
26
61
92
61
IG
92
61
61
IG
63
63
66
63
66
63
63
63
63

21158-0441
24801-1420
24802-1420
23547-6675
23548-6675
23550-6675
24807-3533
29500-4140
29502-4140
24060-0442
21158-0442
21527-0442
21158-0443
21158-0444
23078-7372
24801-0787
24802-0787
23548-6517
23550-6517
21702-0445
21158-0445
21527-0445
21158-0446
21158-0447
23547-8569
24600-1296
29502-4680
25058-6502
27223-6192
24802-2195
29502-5101
29502-5621
29502-5214
29507-5536
24600-0449
24060-2224
27063-0350
24060-1776
29507-4922
27063-0364
24060-2212
24060-2784
29502-4860
21158-7316
21158-0448
21527-0448
21158-0451
21527-0451
21158-7715
21158-0454
21158-0457
21158-0462

SHAFT

BORE

WIDTH

1.281
1.281
1.281
1.281
1.281
1.281
1.281
1.281
1.299
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.312
1.313
1.313
1.334
1.334
1.334
1.337
1.344
1.344

2.250
2.250
2.437
2.441
2.497
2.497
2.497
2.500
1.772
1.562
1.605
1.625
1.750
1.750
1.875
1.984
2.000
2.000
2.000
2.047
2.062
2.062
2.062
2.062
2.106
2.106
2.125
2.125
2.125
2.125
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.437
2.441
2.500
2.500
2.500
2.500
2.875
2.000
2.313
2.363
2.363
2.363
2.165
2.062
2.106

0.375
0.500
0.500
0.375
0.500
0.687
0.687
0.375
0.315
0.125
0.156
0.156
0.187
0.250
0.219
0.375
0.375
0.437
0.625
0.375
0.375
0.375
0.375
0.437
0.375
0.687
0.375
0.375
0.437
0.500
0.375
0.437
0.500
0.375
0.375
0.437
0.500
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.690
0.750
0.500
0.625
0.625
0.315
0.375
0.375

MODEL NO. PART NO.

63
63
63
63
63
63R1
63T2
63
61
71
76
76
76
92
92
63
63
63
IG
63
26
62
63
63
63
63T2
62
63
63
63
63
63
63
62
63
63
63
63
63
62
63
62
63
63
EQ
IG
EQ
EQ
EQ
26R1
63
63

21158-0463
21158-0465
21158-0471
21158-8070
21158-0474
23547-9551
23550-9551
21158-0475
24060-1784
26001-6193
26193-6194
26193-6195
26193-7519
27063-6197
27063-9527
21158-0478
21158-0481
21158-0482
29507-1146
21158-4821
24600-1297
21702-0484
21158-0484
21158-0485
21158-0487
23550-9381
21702-0490
21158-0490
21158-0491
21158-0492
21158-0493
21158-0494
21158-0495
21702-0496
21158-0496
21158-0497
21158-0498
21158-0499
21158-8071
21702-0505
21158-0505
21702-0507
21158-0507
21158-3879
24807-2524
29502-4273
24801-1019
24801-1411
24802-1411
24620-0574
21158-0508
21158-0511

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-15

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.344
1.370
1.370
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375

2.125
2.125
2.250
2.250
2.375
2.437
2.437
2.441
2.497
2.500
2.500
2.625
2.060
2.375
1.625
1.625
1.687
1.750
1.750
1.750
1.874
1.875
1.875
1.875
1.875
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.047
2.047
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.064
2.103
2.106

0.375
0.437
0.375
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.625
0.750
0.109
0.125
0.109
0.187
0.219
0.690
0.690
0.187
0.250
0.312
0.625
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.500
0.625
0.690
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.687
0.687
0.690
0.500
0.625
0.375

Garlock

MODEL NO. PART NO.

63
63
62
63
63
63
63
63
63
62
63
63
IG
IG
71
71
71
76
76
EQ
EQ
92
26
94
IG
3
26
61
61
61
62
63
61
IG
EQ
62
63
61
62
63
66
67
68
92
63
63
63R1
63T2
EQ
26
IG
63

21158-0514
21158-0515
21702-0517
21158-0517
21158-0520
21158-0523
21158-0525
21158-8072
21158-0526
21702-0529
21158-0529
21158-0532
29507-4318
29502-4689
26001-9961
26001-7068
26001-8715
26193-7520
26193-8479
24807-4078
24807-2512
27063-7521
24600-6207
27223-6208
29507-4176
28003-1348
24600-1454
24060-1354
24060-7386
24064-7386
21702-7386
21158-7386
24063-0857
29507-2940
24807-1970
21702-6655
21158-6655
24060-0535
21702-0535
21158-0535
21527-0535
21528-0535
21823-0535
27063-0535
21158-0536
21158-0537
23547-6576
23550-6576
24807-2692
24600-0705
29507-4815
21158-0538

SHAFT

BORE

WIDTH

1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375

2.106
2.106
2.106
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.263
2.374
2.375
2.375
2.375

0.437
0.500
0.687
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.594
0.625
0.625
0.625
0.625
0.625
0.687
0.687
0.687
0.690
0.750
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.500
0.594
0.625
0.625
0.687
0.687
0.750
0.625
0.312
0.375
0.375
0.375

MODEL NO. PART NO.

63
63
63T2
3
26
61
61
62
63
66
67
68
76
62
63
62
63
63F1
63F1
EQ
EQ
IG
IG
63R1
63R2
63T2
EQ
IG
3
25
61
62
63
66
67
68
63
25
62
63
EQ
63F1
EQ
EQ
63R1
63T2
IG
IG
3
26
63
66

21158-0539
21158-0540
23550-5007
28003-1360
24600-1829
24060-0541
24061-0541
21702-0541
21158-0541
21527-0541
21528-0541
21823-0541
26193-0541
21702-0542
21158-0542
21702-0543
21158-0543
23078-7567
23078-9833
24801-1092
24802-1092
29507-1092
29519-1092
23547-6479
23548-6479
23550-6479
24807-2858
29502-4118
28003-1368
25058-0544
24060-0544
21702-0544
21158-0544
21527-0544
21528-0544
21823-0544
21158-0545
25058-0546
21702-0546
21158-0546
24801-1008
23078-6701
24801-1121
24802-1121
23547-6774
23550-6774
29502-5520
29507-5097
28003-1378
24600-0547
21158-0547
21527-0547

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-16

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375

2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.438
2.439
2.439
2.441
2.441
2.441
2.497
2.497
2.497
2.497
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.561
2.562
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.688
2.750
2.812

0.375
0.375
0.437
0.437
0.500
0.625
0.750
0.750
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.625
0.625
0.750
0.250
0.500
0.625
0.312
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.625
0.625
0.625
0.687
0.750
0.375
0.500
0.375
0.375
0.437
0.500
0.687
0.687
0.750
0.500
0.375
0.750

MODEL NO. PART NO.

67
68
62
63
63
EQ
IG
IG
62
63
66
62
63
62
63
EQ
EQ
IG
61
26
EQ
94
63
66
63
66
63
63
26
61
63
66
67
68
63
26
EQ
EQ
63T2
IG
63
58
63
66
63
63
63R2
63T2
IG
26
61
IG

21528-0547
21823-0547
21702-0548
21158-0548
21158-0549
24802-1101
29500-4141
29502-4141
21702-0550
21158-0550
21527-0550
21702-0551
21158-0551
21702-0552
21158-0552
24801-2694
24802-2694
29502-4320
24060-1355
24600-0708
24802-1929
27223-5091
21158-6658
21527-6658
21158-0553
21527-0553
21158-0554
21158-0555
24600-0556
24060-0556
21158-0556
21527-0556
21528-0556
21823-0556
21158-0557
24600-0754
24801-0754
24802-0754
23550-6475
29502-5334
21158-0562
21003-2295
21158-0559
21527-0559
21158-0560
21158-0561
23548-4976
23550-4976
29502-5024
24600-1298
24060-1356
29502-5386

SHAFT

BORE

WIDTH

1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.378
1.387
1.399
1.406
1.406
1.406
1.406
1.406
1.406
1.406

2.828
2.835
2.835
2.835
2.835
2.835
2.835
2.835
2.836
2.875
2.875
2.875
3.125
3.125
3.150
3.150
1.850
1.850
1.850
1.969
1.969
1.969
1.969
1.969
1.969
2.047
2.047
2.146
2.165
2.165
2.165
2.165
2.165
2.244
2.362
2.441
2.441
2.539
2.545
2.835
3.150
3.465
3.465
1.850
2.292
2.125
2.125
2.125
2.250
2.375
2.375
2.441

0.625
0.312
0.375
0.375
0.375
0.625
0.625
0.750
0.500
0.375
0.375
0.625
0.625
0.750
0.375
0.750
0.276
0.315
0.625
0.276
0.276
0.276
0.315
0.394
0.625
0.276
0.625
0.748
0.315
0.434
0.625
0.625
0.750
0.394
0.625
0.276
0.625
0.748
0.625
0.750
0.625
0.500
0.500
0.394
0.315
0.375
0.375
0.437
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

EQ
94
63
67
68
EQ
EQ
IG
EQ
61
63
EQ
EQ
IG
94
IG
92
61
IG
61
61
92
26R1
61
IG
26
IG
EQSPB
92
26R1
EQ
EQ
IG
26
EQ
92
EQ
EQSPB
EQ
IG
EQ
26
EQ
61
61
62
63
63
63
61
63
63

24801-4639
27223-6639
21158-4584
21528-4584
21823-4584
24801-1138
24802-1138
29502-4104
24801-1017
24060-9612
21158-9612
24802-2622
24802-1105
29502-4329
27223-6557
29502-5775
27063-0366
24060-1787
29507-4924
24060-2119
24061-2119
27063-0368
24620-0572
24060-1789
29507-4925
24600-1139
29507-4926
24816-7061
27063-0371
24620-0573
24801-2260
24802-2260
29502-4529
24600-0575
24802-1752
27063-0376
24802-5917
24816-7062
24802-4096
29502-5798
24802-3087
24600-0913
24801-0913
24064-1788
24060-2460
21702-0565
21158-0565
21158-0566
21158-0568
24060-0571
21158-0571
21158-8073

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-17

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.406
1.406
1.417
1.417
1.417
1.417
1.427
1.428
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437

2.500
2.625
1.850
2.047
2.125
2.126
2.500
2.375
1.750
1.937
2.062
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.310
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.441
2.497
2.497
2.497
2.500
2.500
2.500

0.375
0.375
0.276
0.374
0.625
0.276
0.625
0.625
0.156
0.250
0.250
0.375
0.375
0.375
0.375
0.437
0.500
0.625
0.687
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.625
0.687
0.687
0.625
0.375
0.375
0.375
0.437
0.500
0.500
0.625
0.375
0.375
0.437
0.500
0.594
0.625
0.687
0.750
0.375
0.375
0.375
0.437
0.375
0.437
0.500

Garlock

MODEL NO. PART NO.

63
63
92
63
IG
92
EQ
EQ
71
94
71
62
63
66
94
63
63
EQ
63T2
62
63
66
63
62
63
EQ
EQ
63R2
63T2
EQ
62
63
66
63
62
63
IG
63
66
63
63
63F1
EQ
63T2
IG
63
63
66
63
63
63
62

21158-0580
21158-0583
27063-0378
21158-7748
29507-5552
27063-0379
24802-1100
24802-4084
26001-7070
27223-6211
26001-7071
21702-0592
21158-0592
21527-0592
27223-0592
21158-0593
21158-0594
24802-4456
23550-9122
21702-0595
21158-0595
21527-0595
21158-0596
21702-0597
21158-0597
24801-0741
24802-1116
23548-6569
23550-6569
24802-3002
21702-0598
21158-0598
21527-0598
21158-0599
21702-0600
21158-0600
29507-1958
21158-0601
21527-0601
21158-0602
21158-0603
23078-6961
24801-2720
23550-7226
29502-4177
21158-9294
21158-0604
21527-0604
21158-0605
21158-0607
21158-0608
21702-0609

SHAFT

BORE

WIDTH

1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.437
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.438
1.450
1.453
1.453
1.457
1.465
1.468
1.468
1.469
1.469
1.469
1.469
1.469
1.469
1.469

2.500
2.500
2.500
2.625
2.625
2.686
2.686
2.686
2.694
3.150
1.938
1.938
1.938
2.000
2.000
2.062
2.063
2.063
2.063
2.063
2.063
2.063
2.125
2.125
2.125
2.125
2.188
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.438
2.500
2.500
2.500
2.360
1.968
2.047
2.500
2.343
2.343
2.375
2.000
2.250
2.250
2.375
2.375
2.375
2.375

0.500
0.625
0.687
0.375
0.500
0.375
0.500
0.687
0.750
0.375
0.375
0.625
0.690
0.312
0.313
0.690
0.312
0.313
0.609
0.820
0.875
0.975
0.375
0.375
0.625
0.690
0.375
0.500
0.625
0.750
0.375
0.375
0.625
0.750
0.500
0.375
0.500
0.750
0.750
0.312
0.312
0.750
0.625
0.690
0.750
0.312
0.375
0.594
0.375
0.500
0.625
0.687

MODEL NO. PART NO.

63
EQ
63R2
63
63
63
63
63R1
IG
94
61
IG
EQ
61
26
EQ
61
26
EQSPB
IGSPB
EQSPB
EQSPB
26
61
IG
EQ
61
26
EQ
IG
26
61
EQ
IG
26
61
26
IG
IG
92
92
IG
EQ
EQ
IG
76
63
63F1
63
63
EQ
63R2

21158-0609
24802-2107
23548-4861
21158-0610
21158-0612
21158-0613
21158-0615
23547-4891
29502-5268
27223-6215
24060-2335
29507-5624
24807-1783
24060-1358
24600-1465
24807-3110
24060-1361
24600-1466
24816-7124
29516-5432
24816-3982
24816-7067
24600-0737
24060-0592
29507-4456
24807-1888
24060-1362
24600-0741
24801-1116
29502-4117
24600-0598
24060-0598
24802-1958
29502-5489
24600-0634
24060-0595
24600-0609
29502-5436
29502-4742
27063-9965
27063-6218
29502-4440
24802-1139
24807-3144
29502-5596
26193-6036
21158-0616
23078-8432
21158-0619
21158-0621
24802-4685
23548-9081

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-18

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.469
1.475
1.493
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500

2.437
2.437
2.437
2.437
2.441
2.500
2.686
2.750
2.750
2.750
2.756
2.335
2.493
2.126
2.165
2.165
2.165
2.165
2.362
2.441
2.441
2.496
1.750
1.875
1.875
1.875
2.000
2.000
2.000
2.063
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.219
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250

0.375
0.469
0.500
0.500
0.375
0.375
0.375
0.437
0.687
0.687
0.375
0.625
0.625
0.394
0.276
0.394
0.625
0.690
0.750
0.276
0.625
0.625
0.109
0.125
0.187
0.187
0.250
0.625
0.690
0.820
0.312
0.312
0.375
0.375
0.437
0.437
0.437
0.437
0.625
0.625
0.690
0.625
0.250
0.250
0.250
0.312
0.312
0.375
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

63
63
62
63
63
63
63
63
63R2
63T2
63
EQ
EQ
61
92
61
IG
EQ
IG
92
EQ
EQ
71
71
71
76
76
IG
EQ
IGSPB
3
61
61
62
61
61
62
63
EQ
IG
EQ
IG
26
61
92
3
62
26
61
62
63
66

21158-0622
21158-5496
21702-0624
21158-0624
21158-8075
21158-0628
21158-0634
21158-0638
23548-4818
23550-4818
21158-0640
24802-2288
24802-3284
24061-1794
27063-0381
24060-1484
29507-4934
24807-2839
29502-5372
27063-0382
24802-4935
24802-4102
26001-6221
26001-6222
26001-6223
26193-6223
26193-7517
29507-4130
24807-2578
29516-7128
28003-1454
24060-1364
24060-4798
21702-4798
24062-5713
24063-5713
21702-5713
21158-5713
24802-1118
29507-1118
24807-3410
29507-5373
24600-9722
24060-9722
27063-9722
28003-1462
21702-5246
24600-0643
24060-0643
21702-0643
21158-0643
21527-0643

SHAFT

BORE

WIDTH

1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500

2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.254
2.313
2.374
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.378
2.410
2.437
2.437
2.437
2.437
2.441
2.441
2.460
2.497
2.497

0.375
0.375
0.437
0.437
0.438
0.500
0.500
0.500
0.500
0.500
0.531
0.594
0.625
0.625
0.687
0.687
0.690
0.750
0.750
0.312
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.687
0.687
0.687
0.750
0.500
0.625
0.375
0.375
0.437
0.500
0.375
0.375
0.625
0.375
0.375

MODEL NO. PART NO.

67
68
62
63
26
61
61
62
63
EQ
63R1
63F1
EQ
EQ
63R1
63T2
EQ
IG
IG
61
3
61
61
62
63
66
67
68
63
62
63
67
68
EQ
EQ
EQ
IG
63R1
63R2
63T2
IG
EQ
EQ
63
66
63
63
63
66
EQ
63
66

21528-0643
21823-0643
21702-0644
21158-0644
24600-0644
24062-0645
24063-0645
21702-0645
21158-0645
24801-0804
23547-8704
23078-7568
24801-1763
24802-1763
23547-6937
23550-6937
24807-3700
29502-4235
29502-4595
24060-1367
28003-1472
24060-2410
24060-0646
21702-0646
21158-0646
21527-0646
21528-0646
21823-0646
21158-0647
21702-0648
21158-0648
21528-0648
21823-0648
24801-0648
24801-1214
24802-1214
29507-1214
23547-6667
23548-6667
23550-6667
29502-4810
24801-1099
24802-1874
21158-0649
21527-0649
21158-0650
21158-0651
21158-3880
21527-3880
24802-1872
21158-0652
21527-0652

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-19

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500

2.497
2.499
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.502
2.545
2.563
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.686
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.756
2.864
2.875
2.875

0.500
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.625
0.687
0.687
0.687
0.687
0.750
0.750
0.312
0.625
0.625
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.594
0.625
0.625
0.687
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.594
0.750
0.375
0.375
0.437
0.500
0.750
0.375
0.406

Garlock

MODEL NO. PART NO.

63
EQ
25
61
61
62
63
66
67
68
63
26
62
63
IG
63R1
63R2
63T2
63TB
IG
IG
3
EQ
EQ
61
63
67
68
63
63
EQ
63F1
EQ
EQ
63T2
63
61
62
63
67
68
63
63
63F1
IG
61
63
63
63
IG
61
63

21158-0654
24802-1194
25058-0655
24060-0655
24061-0655
21702-0655
21158-0655
21527-0655
21528-0655
21823-0655
21158-0656
24600-0635
21702-0657
21158-0657
29507-1194
23547-6551
23548-6551
23550-6551
23549-6551
29500-4143
29502-4143
28003-1492
24802-4346
24802-3048
24060-0658
21158-0658
21528-0658
21823-0658
21158-0659
21158-0660
24801-0856
23078-5004
24801-1166
24802-1166
23550-6448
21158-0661
24060-0664
21702-0664
21158-0664
21528-0664
21823-0664
21158-0665
21158-0666
23078-5268
29502-5743
24060-0667
21158-0667
21158-0668
21158-0669
29502-5578
24060-1368
21158-5501

SHAFT

BORE

WIDTH

1.500
1.500
1.500
1.500
1.500
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.552
1.560
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562

2.882
3.000
3.045
3.250
3.500
2.250
2.250
2.375
2.441
2.497
2.500
2.500
2.625
2.750
2.756
2.500
2.590
2.188
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.441
2.441
2.441
2.497
2.497
2.500
2.500
2.500
2.500
2.500

0.375
0.500
0.625
0.500
0.437
0.375
0.375
0.375
0.375
0.375
0.375
0.438
0.375
0.500
0.375
0.500
0.625
0.312
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.594
0.375
0.375
0.375
0.437
0.500
0.687
0.687
0.690
0.375
0.375
0.375
0.437
0.437
0.500
0.625
0.687
0.375
0.437
0.750
0.375
0.375
0.375
0.375
0.375
0.437
0.500

MODEL NO. PART NO.

63
26
EQ
26R1
61
62
63
63
63
63
63
26
63
63
63
61
EQ
26
26
62
63
66
67
63
63
63F1
62
63
66
63
62
63R1
63R2
EQ
62
63
66
62
63
63
EQ
63R1
63
63
IG
63
66
62
63
66
63
63

21158-3881
24600-0874
24801-3971
24620-4228
24061-1369
21702-0670
21158-0670
21158-0673
21158-8076
21158-0679
21158-0682
24600-3993
21158-0685
21158-0693
21158-0694
24060-2574
24802-1779
24600-0698
24600-1234
21702-0700
21158-0700
21527-0700
21528-0700
21158-0701
21158-0702
23078-7116
21702-0703
21158-0703
21527-0703
21158-0704
21702-0705
23547-8104
23548-8104
24807-4579
21702-0706
21158-0706
21527-0706
21702-0707
21158-0707
21158-0708
24802-3268
23547-7280
21158-8077
21158-8326
29502-4877
21158-0709
21527-0709
21702-0712
21158-0712
21527-0712
21158-0713
21158-0714

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-20

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.562
1.563
1.563
1.563
1.563
1.563
1.563
1.570
1.570
1.570
1.570
1.571
1.571
1.573
1.573
1.574

2.500
2.500
2.500
2.500
2.500
2.502
2.561
2.561
2.598
2.625
2.625
2.625
2.625
2.625
2.686
2.686
2.686
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.783
2.783
2.783
2.783
2.835
2.875
2.875
3.150
3.150
3.544
3.544
3.548
2.375
2.438
2.500
2.563
2.563
2.623
2.000
2.250
2.338
3.188
2.571
2.571
2.572
3.250
2.440

0.594
0.625
0.625
0.687
0.750
0.750
0.500
0.500
0.750
0.375
0.375
0.500
0.500
0.625
0.375
0.375
0.687
0.375
0.375
0.437
0.500
0.625
0.375
0.375
0.437
0.375
0.375
0.437
0.687
0.375
0.375
0.375
0.312
0.375
0.375
0.375
0.750
0.375
0.375
0.375
0.500
0.750
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.625
0.433

MODEL NO. PART NO.

63F1
EQ
IG
63R2
IG
IG
63
66
IG
63
66
62
63
EQ
63
66
63T2
63
66
63
63
EQ
63
66
63
63
66
63
63T2
63
63
66
94
66
66
94
IG
61
61
61
61
IG
IG
IG
IG
EQ
EQ
EQ
IG
IG
EQ
26R1

23078-6271
24802-3029
29507-3029
23548-6899
29502-4843
29502-4470
21158-4645
21527-4645
29502-5731
21158-0715
21527-0715
21702-0717
21158-0717
24802-1186
21158-0718
21527-0718
23550-7130
21158-0721
21527-0721
21158-0722
21158-0723
24802-4202
21158-0724
21527-0724
21158-0725
21158-0727
21527-0727
21158-0728
23550-7261
21158-8078
21158-3883
21527-3883
27223-8003
21527-6686
21527-6486
27223-6486
29502-5292
24060-0703
24060-0706
24060-0712
24060-1370
29502-4274
29502-4771
29507-5482
29507-4545
24802-1267
24801-1974
24802-2971
29507-2971
29502-5051
24801-3241
24620-0729

SHAFT

BORE

WIDTH

1.574
1.574
1.574
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.578
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.594
1.610
1.614
1.625
1.625

2.448
2.575
3.937
2.047
2.047
2.047
2.047
2.165
2.165
2.165
2.165
2.205
2.283
2.283
2.283
2.362
2.362
2.362
2.441
2.441
2.441
2.441
2.441
2.441
2.500
2.559
2.559
2.575
2.835
3.071
3.150
3.150
3.425
2.687
2.375
2.375
2.437
2.441
2.500
2.500
2.625
2.625
2.686
2.750
2.750
2.756
2.835
2.875
2.000
2.402
1.875
2.000

0.314
0.625
0.625
0.276
0.276
0.625
0.690
0.276
0.315
0.394
0.394
0.276
0.315
0.394
0.625
0.354
0.394
0.750
0.276
0.315
0.375
0.375
0.394
0.750
0.625
0.276
0.472
0.750
0.276
0.750
0.394
0.625
0.625
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.500
0.500
0.375
0.500
0.375
0.375
0.375
0.690
0.750
0.109
0.109

MODEL NO. PART NO.

26
EQ
EQ
26
92
IG
EQ
92
61
61
61
92
92
61
IG
26
61
IG
92
61
61
63
63
IG
EQ
26
26R1
IG
92
IG
92
EQ
EQ
62
62
63
63
63
63
66
63
63
63
63
63
63
63
63
EQ
IG
71
71

24600-4632
24802-1803
24802-3498
24600-5918
27063-0391
29507-4718
24807-1359
27063-0392
24063-2055
24060-1931
24064-1931
27063-0393
27063-0406
24062-2136
29507-5068
24600-0733
24060-1912
29502-5539
27063-0423
24060-0132
24060-8610
21158-8610
21158-7884
29502-4808
24801-3628
24600-1228
24620-1030
29500-4895
27063-0435
29502-4441
27063-0449
24801-2631
24801-3915
21702-9488
21702-0730
21158-0730
21158-0734
21158-8079
21158-0739
21527-0739
21158-0742
21158-0744
21158-0747
21158-0748
21158-0750
21158-0751
21158-8080
21158-0757
24807-3084
29502-4825
26001-6226
26001-6227

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-21

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625

2.125
2.125
2.125
2.125
2.187
2.188
2.250
2.250
2.250
2.250
2.250
2.374
2.374
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.438
2.438
2.441
2.441
2.497
2.497
2.497
2.497
2.500
2.500
2.500

0.250
0.625
0.625
0.690
0.375
0.375
0.312
0.375
0.375
0.625
0.690
0.312
0.625
0.250
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.625
0.625
0.687
0.750
0.375
0.375
0.437
0.469
0.500
0.500
0.594
0.625
0.687
0.750
0.375
0.625
0.375
0.594
0.375
0.375
0.437
0.500
0.312
0.375
0.375

Garlock

MODEL NO. PART NO.

76
EQ
IG
EQ
61
26
61
61
61
IG
EQ
3
EQ
71
61
26
26R1
61
61
61
62
63
66
94
63
62
63
EQ
EQ
63R2
IG
63
66
63
63
63
EQ
63F1
EQ
63T2
IG
26
EQ
63
63F1
63
66
63
63
61
62
63

26193-9971
24802-5360
29507-5360
24807-4079
24060-0758
24600-0758
24060-1371
24060-1092
24061-1092
29507-5290
24807-2164
28003-1576
24802-3321
26001-6230
24060-1372
24600-0760
24620-0760
24060-0760
24061-0760
24062-0760
21702-0760
21158-0760
21527-0760
27223-0760
21158-0761
21702-0762
21158-0762
24801-1915
24802-1915
23548-6516
29502-4615
21158-0763
21527-0763
21158-0764
21158-5393
21158-0765
24801-1748
23078-7152
24801-1270
23550-7044
29502-4679
24600-1301
24802-1270
21158-7767
23078-9943
21158-0766
21527-0766
21158-0767
21158-0768
24060-1373
21702-0769
21158-0769

SHAFT

BORE

WIDTH

1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625
1.625

2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.502
2.525
2.562
2.623
2.623
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.656
2.686
2.686
2.686
2.687
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.783
2.783
2.800
2.835
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875

0.375
0.500
0.500
0.625
0.625
0.687
0.687
0.750
0.312
0.750
0.500
0.250
0.312
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.625
0.625
0.687
0.750
0.750
0.375
0.375
0.375
0.500
0.500
0.375
0.375
0.375
0.500
0.594
0.625
0.625
0.375
0.375
0.437
0.375
0.375
0.625
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.687
0.687

MODEL NO. PART NO.

66
63
EQ
EQ
EQ
63R1
63T2
IG
3
IG
63
92
3
61
62
63
66
63
62
63
EQ
IG
63R1
IG
IG
63
63
66
63
26
26
63
66
63
63F1
EQ
EQ
63
66
63
63
66
EQ
63
63
66
61
63
26
63
63R1
63T2

21527-0769
21158-0771
24801-0717
24801-2987
24802-2987
23547-6860
23550-6860
29502-4327
28003-1590
29502-4828
21158-8615
27063-5249
28003-1598
24060-0772
21702-0772
21158-0772
21527-0772
21158-0773
21702-0774
21158-0774
24802-1089
29507-1089
23547-4766
29500-4144
29502-4144
21158-3884
21158-0775
21527-0775
21158-0777
24600-1302
24600-0778
21158-0778
21527-0778
21158-0780
23078-9739
24801-0770
24802-0770
21158-0781
21527-0781
21158-0782
21158-0784
21527-0784
24802-3576
21158-8081
21158-0787
21527-0787
24060-0788
21158-0788
24600-0876
21158-0789
23547-8266
23550-8266

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-22

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.625
1.653
1.653
1.653
1.654
1.654
1.654
1.654
1.654
1.654
1.654
1.654
1.654
1.654
1.654
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.656
1.685
1.685
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687

3.750
2.165
2.165
2.441
2.165
2.362
2.362
2.441
2.441
2.441
2.559
2.598
2.625
4.193
4.193
2.375
2.441
2.500
2.500
2.625
2.686
2.686
2.750
2.750
2.835
2.875
2.997
2.685
3.185
2.062
2.125
2.125
2.250
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.441
2.497
2.497
2.500
2.500
2.500

0.375
0.354
0.393
0.315
0.625
0.276
0.394
0.394
0.625
0.750
0.625
0.625
0.750
0.625
0.625
0.375
0.375
0.375
0.594
0.500
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.625
0.625
0.690
0.187
0.187
0.250
0.375
0.375
0.375
0.437
0.500
0.687
0.687
0.690
0.375
0.375
0.375
0.437
0.625
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

94
26
26
26
IG
92
61
61
EQ
IG
EQ
EQ
IG
EQ
EQ
63
63
63
63F1
63
63
63
63
63
63
63
63
IG
IG
EQ
76
92
76
62
63
66
63
63
63R1
63T2
EQ
62
63
66
63
63F1
63
63
66
62
63
66

27223-7636
24600-0759
24600-0791
24600-1096
29507-4938
27063-0452
24060-1792
24060-1793
24801-2918
29502-5540
24801-2611
24801-2127
29502-4439
24802-5448
24802-5448
21158-0790
21158-8082
21158-0799
23078-5362
21158-0804
21158-0805
21158-0807
21158-0808
21158-0810
21158-8083
21158-0817
21158-0820
29507-5200
29507-5519
24807-3495
26193-7527
27063-7527
26193-9962
21702-0826
21158-0826
21527-0826
21158-0827
21158-0828
23547-7569
23550-7569
24807-3159
21702-0829
21158-0829
21527-0829
21158-0830
23078-9234
21158-7456
21158-0832
21527-0832
21702-0835
21158-0835
21527-0835

SHAFT

BORE

WIDTH

1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.687
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.688

2.500
2.500
2.500
2.500
2.500
2.500
2.561
2.625
2.625
2.625
2.625
2.686
2.686
2.686
2.686
2.686
2.686
2.686
2.686
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.756
2.835
2.875
2.875
2.875
2.875
2.875
3.000
3.000
3.000
3.000
3.000
3.000
2.125
2.313
2.438
2.500
2.500
2.502
2.506
2.625
2.625
2.688

0.375
0.437
0.500
0.500
0.500
0.594
0.500
0.375
0.375
0.500
0.688
0.375
0.375
0.375
0.437
0.500
0.500
0.687
0.687
0.375
0.375
0.437
0.437
0.500
0.687
0.687
0.375
0.375
0.437
0.500
0.375
0.375
0.375
0.437
0.500
0.594
0.375
0.375
0.375
0.500
0.594
0.687
0.690
0.820
0.375
0.375
0.375
0.375
0.625
0.500
0.750
0.625

MODEL NO. PART NO.

92
63
62
63
EQ
63F1
26
63
66
63
63T2
62
63
66
63
62
63
63R2
63T2
63
66
26
63
63
63R2
63T2
63
66
63
63
63
63
66
63
63
63F1
62
63
66
63
63F1
63R1
EQ
IGSPB
61
26
61
26
IG
26
IG
EQ

27063-0835
21158-0836
21702-0837
21158-0837
24801-0790
23078-7254
24600-0833
21158-0838
21527-0838
21158-0840
23550-6934
21702-0841
21158-0841
21527-0841
21158-0842
21702-0843
21158-0843
23548-6753
23550-6753
21158-0844
21527-0844
24600-1305
21158-0845
21158-0846
23548-6554
23550-6554
21158-0847
21527-0847
21158-0848
21158-0849
21158-7126
21158-0853
21527-0853
21158-0854
21158-0855
23078-9667
21702-0859
21158-0859
21527-0859
21158-0861
23078-6744
23547-6751
24807-2522
29516-7129
24060-0829
24600-0835
24060-0835
24600-0834
29507-5408
24600-0840
29502-5415
24801-2723

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-23

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.688
1.688
1.688
1.688
1.688
1.688
1.688
1.693
1.700
1.716
1.718
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.719
1.720
1.725
1.726
1.732
1.732
1.732
1.745
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750

2.688
2.750
2.750
2.750
2.875
3.000
3.437
2.756
2.437
2.219
2.561
2.437
2.441
2.497
2.497
2.500
2.500
2.625
2.625
2.625
2.686
2.686
2.750
2.750
2.783
2.835
2.875
2.875
2.875
3.000
3.000
2.250
2.625
2.250
2.250
2.362
2.835
2.745
2.000
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.312
2.375
2.375
2.375
2.375
2.375

0.750
0.375
0.625
0.625
0.375
0.375
0.750
0.315
0.375
0.625
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.625
0.687
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.437
0.500
0.375
0.500
0.690
0.625
0.625
0.625
0.354
0.375
0.625
0.109
0.125
0.187
0.187
0.250
0.312
0.625
0.690
0.625
0.250
0.312
0.312
0.312
0.375

Garlock

MODEL NO. PART NO.

IG
61
EQ
EQ
61
61
IG
61
62
IG
63
63
63
63
63
63
63
63
EQ
63R2
62
63
63
63
63
63
63
63
63
63
63
EQ
EQ
IG
IG
26R1
63
IG
71
71
71
76
71
76
IG
EQ
IG
71
61
63
91
61

29502-4275
24060-0844
24801-1341
24802-1341
24060-0853
24060-0859
29502-5692
24060-2532
21702-5315
29507-5737
21158-8484
21158-0862
21158-8084
21158-0865
21158-0867
21158-0868
21158-0870
21158-0871
24801-3071
23548-8646
21702-0874
21158-0874
21158-0877
21158-0878
21158-0883
21158-5963
21158-0886
21158-0887
21158-0888
21158-0892
21158-0894
24807-3784
24802-5494
29507-5225
29507-4864
24620-0895
21158-7865
29507-5201
26001-6240
26001-6241
26001-6242
26193-6242
26001-7080
26193-9675
29507-4586
24807-3952
29507-5319
26001-7081
24060-9822
21158-9822
27023-9822
24060-0813

SHAFT

BORE

WIDTH

1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750

2.375
2.375
2.375
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.438
2.438
2.441
2.441
2.441
2.497
2.497
2.497
2.497
2.497
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.502
2.563
2.623
2.625
2.625
2.625
2.625
2.625
2.625

0.500
0.625
0.690
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.625
0.687
0.687
0.690
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.250
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.594
0.625
0.625
0.687
0.690
0.750
0.312
0.500
0.312
0.312
0.375
0.375
0.375
0.375
0.437

MODEL NO. PART NO.

61
IG
EQ
62
63
66
67
68
63
63
IG
63R2
63T2
EQ
61
26
62
63
66
62
63
66
63
63
92
23
26
61
62
63
66
67
68
92
63
62
63
63F1
EQ
EQ
63T2
EQ
IG
3
61
3
26
61
62
63
66
63

24062-1377
29507-4183
24807-2200
21702-0898
21158-0898
21527-0898
21528-0898
21823-0898
21158-0899
21158-0900
29507-5401
23548-4671
23550-4671
24807-1780
24060-1386
24600-0898
21702-9620
21158-9620
21527-9620
21702-0901
21158-0901
21527-0901
21158-0902
21158-0903
27063-7082
25003-0904
24600-0904
24060-0904
21702-0904
21158-0904
21527-0904
21528-0904
21823-0904
27063-0904
21158-0905
21702-0906
21158-0906
23078-7307
24801-1026
24802-1026
23550-4672
24807-2693
29502-4319
28003-1704
24060-1409
28003-1714
24600-2456
24060-0907
21702-0907
21158-0907
21527-0907
21158-0908

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-24

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750

2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.656
2.686
2.686
2.686
2.686
2.700
2.716
2.718
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.776
2.783
2.783
2.783

0.500
0.500
0.500
0.500
0.562
0.594
0.625
0.625
0.625
0.687
0.690
0.750
0.625
0.375
0.375
0.437
0.500
0.750
0.625
0.359
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.500
0.594
0.625
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.750
0.375
0.375
0.500
0.750
0.375
0.375
0.500

MODEL NO. PART NO.

26R1
62
63
EQ
EQ
63F1
EQ
EQ
IG
63R2
EQ
IG
23
63
66
63
63
IG
EQ
63
3
26R1
26
61
61
62
63
66
67
68
63
26
62
63
EQ
63F1
EQ
EQ
IG
63R1
63R2
63T2
63F1
IG
IG
63
66
63
EQSPB
63
66
63

24620-0909
21702-0909
21158-0909
24801-0909
24802-0990
23078-6028
24801-1062
24802-1062
29507-1062
23548-7228
24807-3739
29502-4323
25003-8721
21158-0910
21527-0910
21158-0911
21158-0912
29502-5471
24802-3257
21158-7459
28003-1726
24620-0896
24600-1767
24060-0913
24061-0913
21702-0913
21158-0913
21527-0913
21528-0913
21823-0913
21158-0914
24600-0639
21702-0915
21158-0915
24801-0639
23078-5005
24801-1744
24802-1744
29507-1744
23547-6832
23548-6832
23550-6832
23078-5256
29500-4145
29502-4145
21158-0916
21527-0916
21158-0918
24816-4446
21158-0919
21527-0919
21158-0921

SHAFT

BORE

WIDTH

1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750

2.812
2.812
2.835
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.997
2.997
2.997
2.997
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.150
3.189
3.189
3.189
3.189
3.347
3.543
3.625
3.625
3.750
3.938

0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.750
0.750
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.594
0.687
0.687
0.687
0.375
0.375
0.375
0.500
0.375
0.375
0.625
0.375
0.375
0.500
0.500
0.500
0.375
0.437
0.437
0.500
0.625
0.750

MODEL NO. PART NO.

61
61
63
63
66
67
68
63
61
63
EQ
EQ
EQ
EQ
IG
IG
IG
IG
63
66
67
63
61
62
63
66
67
68
63
EQ
63F1
63R1
63R2
63T2
62
63
66
63
63
66
EQ
63
66
23
63
123
94
66
63
66
EQ
IG

24061-2223
24061-2434
21158-6725
21158-0922
21527-0922
21528-0922
21823-0922
21158-0923
24060-0924
21158-0924
24801-0879
24802-0879
24801-0998
24802-0998
29507-0998
29519-0998
29500-4107
29502-4107
21158-0925
21527-0925
21528-0925
21158-0927
24060-0928
21702-0928
21158-0928
21527-0928
21528-0928
21823-0928
21158-0930
24801-0720
23078-7555
23547-6522
23548-6522
23550-6522
21702-0931
21158-0931
21527-0931
21158-0933
21158-6724
21527-6724
24802-3975
21158-8085
21527-7282
25003-3885
21158-3885
21016-3885
27223-6256
21527-4899
21158-8456
21527-4606
24801-3270
29502-4348

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-25

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.750
1.754
1.754
1.755
1.760
1.761
1.766
1.766
1.766
1.766
1.766
1.768
1.770
1.770
1.771
1.771
1.771
1.771
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.772
1.773
1.781

3.968
2.754
2.754
3.358
2.875
3.937
2.323
2.559
2.750
2.750
2.953
2.193
2.834
2.875
2.521
2.568
2.996
3.937
2.165
2.362
2.362
2.362
2.441
2.441
2.441
2.441
2.441
2.441
2.539
2.559
2.559
2.559
2.559
2.559
2.559
2.622
2.622
2.638
2.750
2.756
2.835
2.835
2.953
2.972
3.021
3.150
3.228
3.346
3.346
3.543
2.500
2.437

0.500
0.625
0.750
0.750
0.750
0.375
0.625
0.375
0.625
0.750
0.312
0.625
0.375
0.750
0.500
0.398
0.625
0.750
0.625
0.276
0.315
0.690
0.312
0.394
0.394
0.394
0.625
0.690
0.748
0.315
0.394
0.394
0.394
0.394
0.750
0.500
0.750
0.500
0.750
0.750
0.315
0.750
0.750
0.748
0.750
0.394
0.710
0.394
0.750
0.750
0.625
0.375

Garlock

MODEL NO. PART NO.

EQ
IG
IG
IG
IG
94
IG
63
EQ
IG
94
IG
26
IG
EQ
26
EQ
IG
IG
92
61
EQ
26R1
26
58
61
EQ
EQ
EQSPB
61
26
61
61
61
IG
26
IG
EQ
IG
IG
92
IG
IG
EQSPB
IG
92
IGSPB
92
IG
IG
IG
63

24801-0836
29507-5217
29502-5167
29502-4546
29502-4692
27223-8762
29507-5138
21158-9223
24802-2292
29502-4350
27223-8004
29507-5738
24600-9538
29500-4656
24801-1784
24600-4633
24802-1804
29500-4678
29507-4554
27063-0488
24060-1796
24807-3149
24620-0935
24600-1097
21003-1797
24060-1797
24802-4341
24807-1923
24816-7063
24064-1799
24600-4044
24060-9223
24061-9223
24062-9223
29502-5541
24600-1579
29502-5135
24801-1374
29502-5594
29502-4490
27063-0512
29502-5930
29502-4581
24816-7064
29502-5766
27063-0516
29516-7130
27063-0520
29502-5819
29502-5807
29507-5291
21158-8405

SHAFT

BORE

WIDTH

1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.781
1.810
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812
1.812

2.441
2.497
2.497
2.500
2.500
2.500
2.500
2.625
2.625
2.625
2.686
2.750
2.750
2.756
2.835
2.875
2.875
3.062
3.062
3.125
3.125
3.125
3.125
3.937
2.875
2.312
2.375
2.497
2.497
2.497
2.500
2.500
2.500
2.500
2.625
2.625
2.625
2.686
2.750
2.750
2.750
2.756
2.758
2.783
2.812
2.835
2.875
2.875
2.875
2.875
3.000
3.125

0.375
0.375
0.375
0.375
0.375
0.375
0.690
0.375
0.375
0.375
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.625
0.375
0.750
0.625
0.187
0.375
0.500
0.500
0.375
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.500
0.500
0.500
0.375
0.750
0.375
0.375
0.594
0.750
0.750
0.375
0.375

MODEL NO. PART NO.

63
63
66
62
63
66
EQ
63
66
94
63
63
66
63
63
63
66
63
66
63
66
63
EQ
94
IG
IG
71
63
62
63
26
63
63
63
26
63
63
63
63
91
63
63
63
63
IG
63
63
63F1
IG
IG
63
63

21158-7761
21158-0934
21527-0934
21702-0937
21158-0937
21527-0937
24807-1903
21158-0940
21527-0940
27223-0940
21158-0945
21158-0946
21527-0946
21158-0951
21158-8086
21158-0955
21527-0955
21158-0964
21527-0964
21158-0967
21527-0967
21158-0969
24802-1898
27223-4598
29500-5328
29507-4414
26001-7083
21158-0970
21702-0972
21158-0972
24600-0973
21158-0973
21158-0974
21158-0975
24600-0976
21158-0976
21158-0978
21158-0979
21158-0982
27023-0982
21158-0984
21158-0987
21158-9633
21158-0988
29502-4276
21158-8088
21158-0991
23078-6592
29500-4560
29502-4560
21158-0997
21158-1003

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-26

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.812
1.812
1.812
1.813
1.813
1.838
1.844
1.844
1.844
1.844
1.844
1.844
1.844
1.844
1.844
1.850
1.873
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875

3.125
3.150
3.544
2.625
2.750
2.750
2.500
2.625
2.686
2.750
2.756
2.835
2.875
2.875
3.150
2.559
2.812
2.250
2.250
2.375
2.375
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.562
2.563
2.622
2.623
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625

0.500
0.375
0.500
0.375
0.625
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.394
0.625
0.187
0.625
0.250
0.690
0.312
0.312
0.375
0.375
0.500
0.500
0.625
0.690
0.690
0.974
0.500
0.312
0.312
0.313
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.500
0.594
0.625
0.625
0.625
0.625
0.687
0.687
0.690

MODEL NO. PART NO.

63
63
26
61
IG
EQ
63
63
63
63
63
63
63
63
63
92
EQ
76
IG
71
EQ
61
61
61
61
61
61
IG
EQ
EQ
IGSPB
EQ
3
26
26R1
23
61
62
63
66
63
63
EQ
EQ
63F1
EQ
EQ
IG
IG
63R2
63T2
EQ

21158-1005
21158-8089
24600-1002
24060-0976
29507-5308
24801-3143
21158-3887
21158-1006
21158-1009
21158-1012
21158-1015
21158-8090
21158-1021
21158-1023
21158-8091
27063-0522
24802-1398
26193-6262
29507-5747
26001-7084
24807-3912
24060-1412
24061-1412
24060-1418
24061-1418
24060-1419
24062-1419
29507-5824
24807-3565
24807-3319
29516-7080
24801-0848
28003-1802
24600-5844
24620-5844
25003-1042
24060-1042
21702-1042
21158-1042
21527-1042
21158-1043
21158-1044
24801-0748
24802-0748
23078-8650
24801-0989
24802-0989
29507-0989
29519-0989
23548-6546
23550-6546
24807-3343

SHAFT

BORE

WIDTH

1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875

2.625
2.625
2.686
2.686
2.686
2.686
2.686
2.686
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.756
2.756
2.756
2.758
2.758
2.783
2.783
2.812
2.835
2.835
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875

0.750
0.750
0.375
0.375
0.437
0.500
0.687
0.750
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.375
0.375
0.375
0.375
0.437
0.500
0.625
0.625
0.375
0.375
0.500
0.375
0.375
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

IG
IG
63
66
62
63
63T2
IG
3
61
62
63
66
67
68
26
62
63
EQ
EQ
IG
IG
63R2
IG
IG
63
66
67
68
63
63
EQ
EQ
63
66
EQ
26R1
63
3
26
61
62
63
66
67
68
61
63
61
62
63
EQ

29500-4124
29502-4124
21158-1045
21527-1045
21702-1046
21158-1047
23550-5652
29502-4330
28003-1814
24060-1048
21702-1048
21158-1048
21527-1048
21528-1048
21823-1048
24600-1039
21702-1050
21158-1050
24801-1075
24802-1075
29507-1075
29519-1075
23548-8643
29500-4110
29502-4110
21158-1051
21527-1051
21528-1051
21823-1051
21158-1052
21158-1053
24801-3506
24802-3506
21158-1054
21527-1054
24801-1072
24620-7164
21158-7164
28003-1826
24600-0622
24060-1057
21702-1057
21158-1057
21527-1057
21528-1057
21823-1057
24062-1058
21158-1058
24060-1059
21702-1059
21158-1059
24801-1059

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-27

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.875
1.878
1.880
1.885
1.886
1.889

2.875
2.875
2.875
2.875
2.875
2.997
2.997
2.997
2.997
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.149
3.149
3.149
3.149
3.189
3.189
3.189
3.189
3.189
3.189
3.250
3.543
3.938
3.938
2.754
2.625
2.700
2.886
2.874

0.625
0.625
0.687
0.750
0.750
0.375
0.375
0.500
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.562
0.562
0.594
0.625
0.625
0.625
0.687
0.750
0.375
0.375
0.500
0.375
0.375
0.375
0.500
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.687
0.750
0.375
0.750
0.750
0.625
0.625
0.500
0.625
0.625

Garlock

MODEL NO. PART NO.

EQ
EQ
63R2
IG
IG
63
66
63
EQ
26
62
63
66
67
68
61
63
63
66
63F1
EQ
EQ
IG
63T2
IG
63
66
67
62
63
66
63
EQ
63
66
67
68
62
63
66
61
63
63TB
IG
26
IG
IG
IG
IG
26R1
EQ
IG

24801-0792
24802-0792
23548-8293
29500-3585
29502-3585
21158-1060
21527-1060
21158-1062
24802-1891
24600-1063
21702-1063
21158-1063
21527-1063
21528-1063
21823-1063
24062-1065
21158-1065
21158-8258
21527-8258
23078-2967
24801-0706
24802-0706
29507-0706
23550-8732
29502-4809
21158-1066
21527-1066
21528-1068
21702-1069
21158-1069
21527-1069
21158-1071
24802-0819
21158-3888
21527-3888
21528-3888
21823-3888
21702-1075
21158-1075
21527-1075
24060-1076
21158-1076
23549-8292
29500-4571
24600-1067
29500-4704
29502-4704
29507-5363
29507-5518
24620-5451
24802-3264
29507-5270

SHAFT

BORE

WIDTH

1.889
1.890
1.890
1.890
1.890
1.890
1.890
1.890
1.890
1.890
1.900
1.906
1.906
1.906
1.906
1.906
1.906
1.906
1.906
1.908
1.920
1.922
1.925
1.932
1.932
1.932
1.932
1.932
1.936
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937

2.889
2.441
2.559
2.559
2.750
2.756
2.756
2.835
2.835
2.890
3.500
2.625
2.750
2.752
2.835
2.875
2.875
3.125
3.150
2.875
3.000
2.875
3.000
2.625
2.750
2.750
2.806
2.932
2.367
2.375
2.412
2.437
2.563
2.567
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.686
2.686
2.686
2.686
2.686
2.686
2.750
2.750
2.750
2.750
2.750

0.625
0.315
0.394
0.690
0.470
0.625
0.750
0.315
0.625
0.750
0.750
0.375
0.375
0.750
0.375
0.375
0.437
0.375
0.375
0.625
0.750
0.438
0.750
0.690
0.625
0.625
0.625
0.625
0.625
0.187
0.469
0.312
0.875
0.876
0.375
0.375
0.375
0.375
0.500
0.687
0.687
0.375
0.375
0.375
0.375
0.500
0.687
0.375
0.375
0.375
0.406
0.500

MODEL NO. PART NO.

EQ
92
92
EQ
26R1
EQ
IG
92
EQ
IG
IG
63
63
IG
63
63
63
63
63
EQ
IG
61
IG
EQ
EQ
EQ
EQ
EQ
IG
71
76
76
EQSPB
EQSPB
26
62
63
66
63
63R2
63T2
61
62
63
66
63
63R2
26
63
66
23
63

24802-3745
27063-0533
27063-0534
24807-2681
24620-1079
24802-1935
29502-4189
27063-0558
24802-4943
29500-5567
29502-4356
21158-1078
21158-1084
29502-5753
21158-8092
21158-1093
21158-1094
21158-1105
21158-8093
24802-2920
29502-4716
24060-2514
29502-4664
24807-2495
24801-2038
24802-2038
24802-4521
24802-3290
29507-4889
26001-7085
26193-5325
26193-9768
24816-7041
24816-7019
24600-1114
21702-1114
21158-1114
21527-1114
21158-1116
23548-7223
23550-7223
24060-1117
21702-1117
21158-1117
21527-1117
21158-1119
23548-7248
24600-1120
21158-1120
21527-1120
25003-9519
21158-1122

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-28

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.937
1.938

2.750
2.750
2.750
2.756
2.756
2.783
2.835
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.997
2.997
2.997
2.997
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.147
3.147
3.150
3.189
3.189
3.189
3.189
3.250
3.250
3.250
3.350
3.350
3.544
3.548
2.412

0.625
0.625
0.750
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.437
0.500
0.687
0.687
0.375
0.375
0.500
0.687
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.687
0.687
0.750
0.375
0.375
0.437
0.500
0.375
0.375
0.437
0.500
0.625
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.375
0.375
0.375
0.500
0.687
0.375
0.375
0.625

MODEL NO. PART NO.

EQ
EQ
IG
63
66
63
63
62
63
66
63
63
63R2
63T2
63
66
63
63R1
62
63
66
94
63
26
63
63R1
63T2
IG
63
66
63
63
63
66
63
63
EQ
63
66
63
63
66
63
63
26
26R1
94
63
63R2
94
26R1
IG

24801-1862
24802-1862
29502-5274
21158-1123
21527-1123
21158-1128
21158-4930
21702-1129
21158-1129
21527-1129
21158-1130
21158-1131
23548-4693
23550-4693
21158-1132
21527-1132
21158-1134
23547-9430
21702-1135
21158-1135
21527-1135
27223-1135
21158-1136
24600-1137
21158-1137
23547-6469
23550-6469
29502-4120
21158-1138
21527-1138
21158-1139
21158-1140
21158-1141
21527-1141
21158-1142
21158-1143
24802-2108
21158-1144
21527-1144
21158-8094
21158-1147
21527-1147
21158-1148
21158-1149
24600-3308
24620-3308
27223-9086
21158-3889
23548-6792
27223-6266
24620-1109
29507-5547

SHAFT

BORE

WIDTH

1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.938
1.949
1.950
1.962
1.962
1.962
1.963
1.965
1.967
1.967
1.967
1.968
1.968
1.968
1.968
1.968
1.968
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969

2.438
2.500
2.500
2.500
2.500
2.563
2.623
2.625
2.688
2.750
2.812
2.875
2.875
2.875
2.875
2.938
2.938
2.996
3.000
3.000
3.149
3.188
3.188
3.031
3.000
2.962
3.188
3.188
3.544
3.000
2.967
2.967
2.967
2.718
2.834
2.875
2.935
2.952
2.953
2.441
2.559
2.559
2.559
2.559
2.559
2.638
2.677
2.677
2.677
2.677
2.686
2.686

0.690
0.375
0.375
0.625
0.690
0.974
0.625
0.375
0.750
0.375
0.625
0.375
0.437
0.625
0.750
0.625
0.750
0.438
0.437
0.625
0.750
0.469
0.500
0.709
0.750
0.750
0.469
0.469
0.500
0.750
0.625
0.625
0.750
0.750
0.472
0.625
0.625
0.500
0.625
0.276
0.315
0.354
0.394
0.394
0.690
0.690
0.315
0.354
0.625
0.690
0.375
0.375

MODEL NO. PART NO.

EQ
26
61
IG
EQ
IGSPB
IG
61
IG
61
EQ
61
26
EQ
IG
EQ
IG
26
26
EQ
IG
26
26
26R1
IG
IG
26
62
26
IG
EQ
IG
IG
IG
26R1
EQ
EQ
EQ
EQ
26R1
92
26R1
61
61
EQ
EQ
92
26R1
IG
EQ
62
63

24807-2882
24600-1111
24060-2478
29507-5703
24807-3413
29516-7092
29507-5129
24063-1114
29502-5713
24060-1120
24802-1141
24060-1129
24600-1130
24802-1743
29502-4714
24802-2730
29502-4277
24600-1124
24600-1125
24802-1123
29502-5570
24600-1126
24600-1149
24620-3715
29502-4688
29502-4591
24600-1155
21702-1155
24600-1157
29502-4665
24802-3266
29507-3266
29502-5168
29502-4880
24620-1107
24802-1760
24802-2480
24801-1127
24802-1197
24620-1106
27063-0563
24620-7654
24060-1814
24061-1814
24807-3431
24807-2155
27063-0567
24620-1108
29507-4945
24807-1846
21702-1150
21158-1150

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-29

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.968
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.969

2.686
2.686
2.688
2.690
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.835
2.835
2.835
2.835
2.835
2.835
2.835
2.875
2.875
2.875
2.875
2.875
2.953
2.953
2.992
2.997
2.997
3.000
3.000
3.000
3.000
3.125
3.125
3.147
3.147
3.150
3.150
3.150
3.150
3.150
3.189
3.189
3.189
3.246
3.246
3.246

0.375
0.594
0.375
0.625
0.375
0.375
0.375
0.375
0.437
0.375
0.375
0.375
0.394
0.625
0.690
0.750
0.315
0.375
0.375
0.375
0.375
0.394
0.625
0.375
0.375
0.375
0.500
0.687
0.315
0.750
0.750
0.437
0.500
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.315
0.375
0.375
0.375
0.625
0.375
0.375
0.625
0.375
0.375
0.500

Garlock

MODEL NO. PART NO.

66
63F1
61
IG
61
62
63
66
63
61
63
66
26
EQ
EQ
IG
92
61
61
63
66
58
EQ
62
63
66
63
63F1
61
IG
IG
63
63
62
63
66
63
63
66
63
66
26
61
61
63
EQ
63
66
EQ
63
66
63

21527-1150
23078-5544
24061-2258
29507-5554
24060-1153
21702-1153
21158-1153
21527-1153
21158-1154
24060-1156
21158-1156
21527-1156
24600-1104
24801-3225
24807-3229
29502-4819
27063-0571
24060-6656
24064-6656
21158-6656
21527-6656
21003-2902
24801-4947
21702-1162
21158-1162
21527-1162
21158-1164
23078-5215
24061-2422
29502-4700
29502-5632
21158-1166
21158-1167
21702-1168
21158-1168
21527-1168
21158-1170
21158-1174
21527-1174
21158-1177
21527-1177
24600-1103
24060-7415
24061-7415
21158-7415
24802-1975
21158-1180
21527-1180
24801-2969
21158-1183
21527-1183
21158-1185

SHAFT

BORE

WIDTH

1.969
1.969
1.969
1.969
1.969
1.969
1.969
1.980
1.998
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000

3.250
3.543
3.543
3.543
4.331
4.331
4.331
2.875
2.500
2.250
2.375
2.375
2.375
2.375
2.375
2.500
2.500
2.500
2.500
2.625
2.625
2.625
2.625
2.625
2.625
2.670
2.686
2.686
2.686
2.686
2.686
2.686
2.686
2.686
2.686
2.690
2.710
2.712
2.715
2.716
2.716
2.745
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750

0.437
0.394
0.625
0.750
0.375
0.375
0.375
0.625
0.625
0.109
0.187
0.187
0.250
0.250
0.625
0.250
0.375
0.625
0.690
0.312
0.312
0.312
0.375
0.375
0.625
0.690
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.687
0.687
0.690
0.690
0.625
0.438
0.375
0.690
0.375
0.312
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

61
26R1
EQ
IG
26
26R1
94
EQ
IG
71
71
76
61
71
IG
92
61
IG
EQ
26
61
76
61
61
IG
EQ
62
63
66
67
68
63
63
63R2
68R2
EQ
EQ
IG
26
63
EQ
63
3
61
25
26
26R1
61
62
63
66
67

24060-2082
24620-1953
24802-3600
29502-4553
24600-2621
24620-2621
27223-8005
24802-3524
29507-5318
26001-6267
26001-7530
26193-7530
24060-7086
26001-7086
29507-5744
27063-9013
24060-1421
29507-5502
24807-2336
24600-4582
24060-4582
26193-4582
24060-1429
24061-1429
29507-4539
24807-4851
21702-1186
21158-1186
21527-1186
21528-1186
21823-1186
21158-1187
21158-1188
23548-6608
23727-6608
24807-3297
24807-1361
29507-5151
24600-1173
21158-1197
24807-4677
21158-1211
28003-2023
24060-1431
25058-1189
24600-1972
24620-1189
24060-1189
21702-1189
21158-1189
21527-1189
21528-1189

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-30

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000

2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.756
2.756
2.756
2.756
2.783
2.783
2.783
2.783
2.835
2.855
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.882
2.884
2.997
2.997
2.997
2.997
2.997
2.997
3.000

0.375
0.437
0.437
0.437
0.438
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.687
0.687
0.687
0.687
0.687
0.750
0.375
0.375
0.437
0.500
0.375
0.375
0.375
0.437
0.375
0.625
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.594
0.625
0.625
0.687
0.687
0.687
0.625
0.375
0.375
0.375
0.375
0.500
0.687
0.375

MODEL NO. PART NO.

68
61
61
63
26
26
61
61
62
63
63F1
EQ
IG
63F1
63R1
63R2
63T2
66R2
IG
63
66
63
63
26
63
66
63
63
EQ
3
26
61
63
66
67
68
63
63
63F1
EQ
EQ
63R2
63T2
63T2
EQ
26R1
62
63
66
63
63R1
23

21823-1189
24060-1190
24062-1190
21158-1190
24600-1190
24600-1191
24062-1191
24063-1191
21702-1191
21158-1191
23078-5283
24802-1249
29507-1249
23078-7563
23547-7563
23548-7563
23550-7563
23702-7563
29502-4326
21158-1192
21527-1192
21158-1193
21158-1194
24600-1195
21158-1195
21527-1195
21158-1196
21158-8111
24802-3560
28003-2035
24600-1198
24060-1198
21158-1198
21527-1198
21528-1198
21823-1198
21158-1199
21158-1200
23078-7099
24801-1406
24802-1406
23548-4670
23550-4670
23550-5778
24802-3541
24620-1201
21702-1201
21158-1201
21527-1201
21158-1203
23547-5568
25003-1204

SHAFT

BORE

WIDTH

2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000

3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.147
3.147
3.147
3.150
3.150
3.188
3.189
3.189
3.189
3.189
3.189

0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.437
0.500
0.500
0.500
0.500
0.594
0.594
0.625
0.625
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.750
0.375
0.375
0.500
0.594
0.375
0.375
0.375
0.375
0.500
0.625
0.625
0.687
0.750
0.375
0.375
0.500
0.375
0.375
0.438
0.375
0.375
0.437
0.500
0.687

MODEL NO. PART NO.

25
26
61
62
63
66
67
68
25
61
61
63
23
26
62
63
63F1
63T2
EQ
EQ
EQ
IG
63R1
63R2
63T2
EQ
IG
IG
63
66
63
63F1
62
63
66
123
63
EQ
EQ
63T2
IG
63
66
63
63
66
26
63
66
63
63
63R2

25058-1204
24600-1204
24060-1204
21702-1204
21158-1204
21527-1204
21528-1204
21823-1204
25058-1205
24060-1205
24061-1205
21158-1205
25003-1206
24600-1206
21702-1206
21158-1206
23078-6904
23550-6904
24801-1206
24801-1350
24802-1350
29507-1350
23547-6438
23548-6438
23550-6438
24802-3349
29500-3349
29502-3349
21158-1207
21527-1207
21158-1209
23078-9666
21702-1210
21158-1210
21527-1210
21016-1210
21158-1212
24801-2001
24802-2001
23550-5053
29502-4217
21158-1213
21527-1213
21158-1215
21158-8097
21527-8097
24600-1217
21158-1216
21527-1216
21158-1217
21158-1218
23548-6706

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-31

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.015
2.027
2.031
2.031
2.031
2.031
2.031
2.031
2.031
2.031
2.031
2.031
2.031
2.047
2.047
2.047
2.047
2.047
2.047
2.053
2.060
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062

3.246
3.246
3.246
3.246
3.246
3.250
3.250
3.347
3.375
3.375
3.375
3.375
3.500
3.500
3.544
3.750
3.000
2.626
2.783
2.835
2.997
3.000
3.062
3.125
3.150
3.150
3.189
3.347
3.350
2.677
2.677
2.750
2.835
2.953
3.150
3.000
3.060
2.661
2.783
2.783
2.835
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.996
2.997
2.997

0.375
0.375
0.500
0.687
0.687
0.437
0.750
0.375
0.375
0.500
0.500
0.687
0.375
0.625
0.375
0.500
0.750
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.344
0.375
0.375
0.375
0.375
0.315
0.625
0.690
0.315
0.625
0.750
0.750
0.625
0.187
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.468
0.500
0.687
0.750
0.625
0.375
0.375

Garlock

MODEL NO. PART NO.

63
66
63
63R2
63T2
61
IG
63
26
61
63
63R2
61
EQ
76
76
IG
IG
63
63
63
63
63
63
63
63
63
63
63
92
IG
EQ
92
EQ
IG
IG
EQ
92
63
66
63
62
63
66
63
26
63
63R1
IG
EQ
23
63

21158-1219
21527-1219
21158-1221
23548-4866
23550-4866
24060-1446
29502-5619
21158-8098
24600-1182
24060-3892
21158-3892
23548-6536
24060-1458
24802-5096
26193-7694
26193-8186
29502-5160
29507-5651
21158-3893
21158-8099
21158-1225
21158-1228
21158-1231
21158-1234
21158-3896
21158-8348
21158-1240
21158-8349
21158-1249
27063-0572
29507-4948
24807-4713
27063-0573
24802-4660
29502-5533
29502-4489
24802-3083
27063-9537
21158-3897
21527-3897
21158-8100
21702-1252
21158-1252
21527-1252
21158-1253
24600-1224
21158-1254
23547-7346
29502-5705
24802-1176
25003-1255
21158-1255

SHAFT

BORE

WIDTH

2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.062
2.063
2.063
2.063
2.063
2.063
2.065
2.065
2.075
2.094
2.094
2.094
2.094
2.094
2.094
2.094

2.997
2.997
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.147
3.147
3.150
3.187
3.189
3.189
3.189
3.250
3.250
3.250
3.347
3.350
3.350
3.500
3.625
2.625
2.823
2.875
3.063
3.063
3.000
3.065
3.189
2.875
2.997
3.062
3.147
3.150
3.250
3.347

0.375
0.687
0.375
0.375
0.375
0.375
0.500
0.500
0.594
0.625
0.750
0.375
0.375
0.375
0.375
0.500
0.687
0.375
0.375
0.500
0.625
0.750
0.375
0.375
0.375
0.703
0.375
0.375
0.594
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.625
0.375
0.974
0.375
0.625
0.750
0.750
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

66
63R2
26
26R1
63
66
26
63
63F1
EQ
IG
26
63
66
94
63
63R1
63
66
63
EQ
IG
63
66
63
63R1
63
66
63F1
63
66
63
63
63
66
63
EQ
61
IGSPB
61
EQ
IG
IG
EQ
62
63
63
63
63
63
63
63

21527-1255
23548-9621
24600-1258
24620-1258
21158-1258
21527-1258
24600-1260
21158-1260
23078-7145
24802-1225
29502-4119
24600-1261
21158-1261
21527-1261
27223-1261
21158-1263
23547-5476
21158-1264
21527-1264
21158-1266
24802-2115
29502-5634
21158-1267
21527-1267
21158-8350
23547-5702
21158-1270
21527-1270
23078-4945
21158-1276
21527-1276
21158-1278
21158-4975
21158-1279
21527-1279
21158-9571
24802-4057
24060-1464
29516-7078
24060-1466
24802-2735
29502-4278
29502-4335
24802-4103
21702-1648
21158-1282
21158-1285
21158-1291
21158-1297
21158-8351
21158-1306
21158-8352

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-32

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.094
2.094
2.094
2.094
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125

3.350
3.372
3.481
3.500
2.500
2.625
2.750
2.750
2.750
2.762
2.763
2.833
2.835
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.878
2.882
2.882
2.882
2.997
2.997
2.997
2.997
2.997
2.997
3.000
3.000
3.000

0.375
0.437
0.375
0.375
0.250
0.375
0.312
0.375
0.625
0.250
0.690
0.438
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.469
0.500
0.500
0.500
0.594
0.625
0.625
0.625
0.687
0.687
0.687
0.687
0.750
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.312
0.375
0.375

MODEL NO. PART NO.

63
63
63
63
71
61
61
61
IG
76
EQ
26
63
3
25
26
61
62
63
66
67
68
26
61
63
63
62
63
EQ
63F1
EQ
EQ
IG
63F1
63R1
63R2
63T2
IG
IG
26R1
62
63
66
63
66
67
68
62
63
76
3
62

21158-1309
21158-1313
21158-1315
21158-1318
26001-5064
24060-2073
24060-1467
24060-4892
29507-5922
26193-7995
24807-3238
24600-1319
21158-8112
28003-2171
25058-1321
24600-1321
24060-1321
21702-1321
21158-1321
21527-1321
21528-1321
21823-1321
24600-1320
24060-1320
21158-1322
21158-5688
21702-1323
21158-1323
24802-0709
23078-4916
24801-1322
24802-1322
29507-1322
23078-4592
23547-4592
23548-4592
23550-4592
29500-4109
29502-4109
24620-1321
21702-3900
21158-3900
21527-3900
21158-1324
21527-1324
21528-1324
21823-1324
21702-1326
21158-1326
26193-9975
28003-2186
21702-1327

SHAFT

BORE

WIDTH

2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125

3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.050
3.061
3.062
3.062
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.129
3.147
3.147
3.150
3.187
3.189
3.189
3.189
3.189
3.189
3.189

0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.625
0.625
0.687
0.687
0.687
0.687
0.750
0.625
0.687
0.375
0.375
0.437
0.500
0.500
0.750
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.438
0.500
0.500
0.500
0.594
0.625
0.687
0.687
0.750
0.750
0.625
0.375
0.375
0.375
0.750
0.375
0.375
0.437
0.500
0.625
0.750

MODEL NO. PART NO.

63
66
67
68
61
63
26
62
63
EQ
EQ
63F1
63R2
63T2
67R2
IG
EQ
63F1
63
66
63
62
63
63F1
26
62
63
66
61
61
63
26
23
63
EQ
63F1
EQ
63R2
63T2
IG
IG
IG
63
66
63
IG
63
66
62
63
EQ
63F1

21158-1327
21527-1327
21528-1327
21823-1327
24060-1328
21158-1328
24600-1325
21702-1329
21158-1329
24801-1323
24802-1323
23078-6593
23548-6593
23550-6593
23683-6593
29502-4205
24802-1849
23078-6794
21158-1330
21527-1330
21158-1331
21702-1332
21158-1332
23078-5687
24600-1333
21702-1333
21158-1333
21527-1333
24060-1334
24061-1334
21158-1334
24600-1334
25003-1335
21158-1335
24801-1335
23078-7484
24802-1761
23548-7160
23550-7160
29500-4146
29502-4146
29507-5098
21158-1336
21527-1336
21158-8353
29502-4617
21158-1339
21527-1339
21702-1340
21158-1341
24802-1010
23078-7787

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-33

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.134
2.145
2.145
2.147
2.147
2.148
2.149
2.150
2.153
2.155
2.155
2.156
2.156
2.156

3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.312
3.347
3.350
3.350
3.350
3.350
3.350
3.350
3.372
3.372
3.372
3.372
3.372
3.375
3.500
3.500
3.500
3.500
3.500
3.520
3.545
3.545
3.623
3.623
3.625
3.875
4.000
3.066
2.865
2.871
2.875
2.875
2.875
2.875
3.150
3.153
2.875
2.875
2.835
2.875
2.882

0.375
0.375
0.375
0.375
0.437
0.438
0.500
0.594
0.625
0.625
0.750
0.625
0.375
0.375
0.375
0.437
0.500
0.594
0.687
0.375
0.375
0.437
0.469
0.500
0.750
0.375
0.375
0.500
0.625
0.750
0.625
0.438
0.438
0.375
0.437
0.750
0.625
0.625
0.750
0.690
0.625
0.625
0.690
0.625
0.625
0.625
0.625
0.625
0.690
0.375
0.375
0.375

Garlock

MODEL NO. PART NO.

26
61
63
66
63
61
63
63F1
EQ
EQ
IG
EQ
63
63
66
63
63
63F1
63R2
63
66
63
63
63
IG
63
66
63
EQ
IG
EQ
26
26R1
94
63
IG
EQ
EQ
IG
EQ
IG
IG
EQ
IG
IG
EQ
EQ
IG
EQ
63
63
63

24600-1345
24062-1345
21158-1345
21527-1345
21158-1346
24062-1346
21158-1347
23078-6605
24801-1854
24802-1854
29502-4807
24802-2999
21158-8354
21158-1348
21527-1348
21158-1349
21158-1350
23078-4838
23548-8404
21158-1351
21527-1351
21158-1352
21158-1342
21158-1353
29502-5003
21158-1357
21527-1357
21158-1359
24802-3058
29502-5769
24802-1248
24600-1355
24620-1355
27223-9670
21158-3902
29502-1745
24802-5368
24802-5369
29520-5654
24807-3878
29507-4839
29507-5295
24807-2537
29507-5478
29507-4667
24802-3169
24802-3054
29507-4337
24807-2866
21158-7667
21158-1360
21158-9407

SHAFT

BORE

WIDTH

2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.156
2.158
2.158
2.159
2.160
2.160
2.160
2.160
2.160
2.161
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165

2.997
2.997
3.000
3.000
3.147
3.150
3.189
3.189
3.250
3.250
3.347
3.350
3.372
3.372
3.500
3.500
3.544
4.725
4.725
3.150
3.158
3.000
3.160
3.160
3.160
3.195
3.250
3.161
2.756
2.756
2.756
2.756
2.835
2.835
2.835
2.835
2.835
2.874
2.952
2.953
2.953
2.972
3.000
3.070
3.070
3.071
3.150
3.150
3.150
3.150
3.165
3.165

0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.375
0.500
0.375
0.687
0.375
0.500
0.375
0.375
0.375
0.625
0.750
0.750
0.625
0.625
0.750
0.750
0.625
0.750
0.315
0.315
0.625
0.690
0.315
0.315
0.315
0.394
0.625
0.690
0.690
0.394
0.750
0.748
0.625
0.354
0.472
0.750
0.315
0.394
0.625
0.750
0.625
0.625

MODEL NO. PART NO.

63
63
62
63
63
63
61
63
63
63
63
63
63
63T2
63
63
63
26R1
94
EQ
IG
IG
EQ
IG
IG
IG
EQ
IG
61
92
IG
EQ
26R1
61
61
61
IG
EQ
EQ
92
IG
EQSPB
EQ
26R1
26R1
IG
92
26
EQ
IG
EQ
EQ

21158-1363
21158-1365
21702-1366
21158-1366
21158-1375
21158-8355
24060-1378
21158-1378
21158-1384
21158-1385
21158-8117
21158-1389
21158-1390
23550-6929
21158-1396
21158-1398
21158-7218
24620-2122
27223-9977
24801-4444
29502-4590
29502-4403
24802-3052
29507-3052
29502-5538
29502-4638
24801-3223
29502-5053
24060-0574
27063-0574
29507-4951
24807-2675
24620-1369
24060-0882
24064-0882
24060-1835
29507-4952
24807-2485
24807-3505
27063-0575
29502-4492
24816-7065
24802-1340
24620-1371
24620-1370
29502-5542
27063-0576
24600-3587
24802-2005
29502-4190
24801-1884
24802-1884

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-34

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.165
2.166
2.174
2.185
2.186
2.186
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187

3.165
3.189
3.189
3.250
3.346
3.542
3.543
3.544
3.937
3.937
3.937
3.174
3.185
3.186
3.186
2.875
2.875
2.875
2.875
2.875
2.875
2.882
2.997
2.997
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.147
3.147
3.147
3.147
3.150
3.187
3.189
3.189
3.189
3.189
3.189
3.246

0.750
0.625
0.750
0.375
0.315
0.750
0.625
0.375
0.375
0.375
0.625
0.625
0.625
0.625
0.625
0.375
0.375
0.437
0.500
0.594
0.687
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.750
0.375
0.375
0.437
0.500
0.625
0.375
0.375
0.375
0.500
0.375
0.375
0.500
0.687
0.375
0.750
0.375
0.375
0.437
0.500
0.625
0.437

MODEL NO. PART NO.

IG
EQ
IG
94
92
IG
EQ
94
26
94
EQ
EQ
IG
EQ
EQ
62
63
63
63
63F1
63T2
63
63
66
62
63
66
63
25
63
IG
63
66
63
63
EQ
62
63
66
63
63
66
63
63TB
63
IG
63
66
63
63
EQ
63

29502-5342
24802-1805
29502-4786
27223-8958
27063-0585
29500-4744
24802-1906
27223-8006
24600-7209
27223-7209
24802-4447
24802-3015
29507-5199
24801-2489
24802-2489
21702-1399
21158-1399
21158-1400
21158-1401
23078-6141
23550-4659
21158-3903
21158-3904
21527-3904
21702-1402
21158-1402
21527-1402
21158-1403
25058-1404
21158-1404
29502-4204
21158-1405
21527-1405
21158-1406
21158-1407
24801-3247
21702-1408
21158-1408
21527-1408
21158-1410
21158-1411
21527-1411
21158-1413
23549-6699
21158-8357
29502-4279
21158-1414
21527-1414
21158-1415
21158-1416
24802-1353
21158-1417

SHAFT

BORE

WIDTH

2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.187
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.188
2.200
2.205
2.205
2.205
2.205
2.205
2.205
2.205
2.219
2.219
2.219
2.219
2.219

3.246
3.250
3.250
3.250
3.250
3.347
3.350
3.350
3.350
3.350
3.372
3.372
3.372
3.481
3.481
3.500
3.500
3.500
3.500
4.331
5.118
5.125
2.823
2.825
2.832
2.837
2.875
2.938
2.938
3.000
3.000
3.000
3.000
3.062
3.125
3.250
3.251
3.350
5.125
2.750
2.756
2.835
2.837
3.150
3.150
3.150
3.346
2.997
2.997
3.000
3.000
3.150

0.437
0.375
0.375
0.375
0.500
0.375
0.375
0.375
0.437
0.500
0.375
0.375
0.500
0.375
0.375
0.375
0.375
0.500
0.687
0.375
0.375
0.625
0.974
1.125
0.625
0.690
0.375
0.750
1.007
0.500
0.500
0.500
0.625
0.690
0.375
0.625
0.750
0.469
0.750
0.625
0.315
0.315
0.690
0.315
0.625
0.750
0.315
0.375
0.594
0.375
0.375
0.375

MODEL NO. PART NO.

66
62
63
66
63
63
63
66
63
63
63
66
63
63
66
63
66
63
63R2
94
94
EQ
IGSPB
EQSPB
IG
EQ
61
IG
IGSPB
26
62
EQ
EQ
EQ
26
EQ
IG
26
IG
IG
92
92
EQ
92
EQ
IG
92
63
63F1
62
63
63

21527-1417
21702-1420
21158-1420
21527-1420
21158-1422
21158-8358
21158-1423
21527-1423
21158-1424
21158-1425
21158-1426
21527-1426
21158-1428
21158-1429
21527-1429
21158-1432
21527-1432
21158-1434
23548-4848
27223-6281
27223-6282
24802-4482
29516-7093
24816-7020
29507-5012
24807-5590
24060-1399
29500-5722
29516-7105
24600-1404
21702-1404
24801-1404
24802-1119
24807-3249
24600-1408
24801-2474
29502-5307
24600-1427
29500-4485
29507-5093
27063-0588
27063-0606
24807-4200
27063-0629
24802-4201
29502-5545
27063-0633
21158-1435
23078-1437
21702-1438
21158-1438
21158-8359

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-35

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.219
2.219
2.219
2.219
2.222
2.225
2.228
2.230
2.232
2.240
2.244
2.244
2.246
2.248
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250

3.250
3.347
3.372
3.500
3.222
3.225
3.228
3.230
3.543
3.240
3.250
3.268
4.500
3.150
2.625
2.625
2.750
2.750
2.875
2.875
2.875
2.875
2.875
2.875
2.938
2.995
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
2.997
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000

0.375
0.375
0.375
0.375
0.625
0.750
0.750
0.625
0.375
0.750
0.625
0.625
0.750
0.750
0.109
0.690
0.250
0.690
0.312
0.312
0.375
0.438
0.625
0.690
1.007
0.625
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.500
0.594
0.687
0.687
0.687
0.750
0.750
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437

Garlock

MODEL NO. PART NO.

63
63
63
63
EQ
IG
IG
EQ
63
IG
EQ
EQ
IG
IG
71
EQ
76
EQ
26
61
61
61
IG
EQ
IG
EQ
62
63
66
67
68
62
62
63
63F1
63F1
63R2
66R1
63F1
66F1
IG
3
26
61
62
63
66
67
68
61
61
62

21158-1456
21158-8360
21158-1462
21158-1468
24802-3056
29502-5463
29502-4812
24802-3153
21158-7702
29502-5056
24802-4442
24802-1981
29502-4368
29502-5211
26001-6284
24807-2567
26193-7531
24807-1802
24600-1469
24060-1503
24060-1507
24060-2797
29507-5564
24807-2667
29516-7076
24801-1473
21702-1471
21158-1471
21527-1471
21528-1471
21823-1471
21702-1472
21702-1473
21158-1473
23078-5208
23078-6795
23548-6795
23722-6795
23078-8498
23692-8498
29502-4408
28003-2303
24600-1474
24060-1474
21702-1474
21158-1474
21527-1474
21528-1474
21823-1474
24060-1475
24061-1475
21702-1475

SHAFT

BORE

WIDTH

2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250

3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.147
3.147
3.147
3.147
3.147
3.147
3.150
3.150
3.187
3.189
3.189
3.189
3.189
3.189
3.190
3.190
3.246
3.246
3.246
3.246

0.437
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.687
0.687
0.687
0.690
0.750
0.375
0.375
0.437
0.500
0.250
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.625
0.625
0.687
0.750
0.375
0.375
0.375
0.500
0.594
0.687
0.375
0.375
0.625
0.375
0.375
0.437
0.625
0.625
0.690
0.750
0.375
0.375
0.375
0.500

MODEL NO. PART NO.

63
61
62
63
EQ
EQ
EQ
IG
63F1
63R2
63T2
EQ
IG
63
66
26
63
92
3
23
63
66
61
63
23
26
63
EQ
EQ
EQ
63T2
IG
62
63
66
63
63F1
63R1
63
71
EQ
63
66
63
EQ
EQ
EQ
IG
62
63
66
63

21158-1475
24062-1476
21702-1476
21158-1476
24801-1476
24801-1479
24802-1479
29519-1479
23078-6478
23548-6478
23550-6478
24807-3298
29502-4462
21158-1477
21527-1477
24600-1470
21158-1479
27063-5774
28003-2317
25003-1480
21158-1480
21527-1480
24060-1508
21158-1481
25003-1482
24600-1482
21158-1482
24801-1482
24801-1483
24802-1483
23550-6995
29502-5419
21702-1483
21158-1483
21527-1483
21158-1485
23078-7142
23547-4905
21158-8361
26001-8361
24802-1180
21158-1486
21527-1486
21158-1487
24801-1901
24802-1901
24807-3778
29502-4367
21702-1489
21158-1489
21527-1489
21158-1491

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-36

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250

3.246
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.251
3.312
3.347
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.353
3.372
3.372
3.372
3.372
3.372
3.372
3.372
3.375
3.375
3.375
3.375
3.481
3.481
3.500

0.687
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.438
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.375
0.625
0.375
0.375
0.375
0.375
0.437
0.469
0.500
0.625
0.687
0.375
0.375
0.375
0.437
0.500
0.594
0.687
0.687
0.437
0.500
0.625
0.625
0.375
0.375
0.375

MODEL NO. PART NO.

63R1
23
26
62
63
66
67
68
61
61
63
23
23
25
61
62
63
EQ
EQ
EQ
EQ
63R2
63T2
63TF
IG
IG
3
EQ
63
62
63
66
63
63
63
EQ
63R1
26
63
66
63
63
63F1
63T2
63TB
61
26
EQ
EQ
63
66
26

23547-7691
25003-1492
24600-1492
21702-1492
21158-1492
21527-1492
21528-1492
21823-1492
24060-1493
24063-1493
21158-1493
25003-1493
25003-1494
25058-1494
24062-1494
21702-1494
21158-1494
24801-1494
24802-1494
24801-1493
24802-1493
23548-4665
23550-4665
23735-4665
29500-4148
29502-4148
28003-2329
24801-5732
21158-8362
21702-1495
21158-1495
21527-1495
21158-1496
21158-5560
21158-1497
24802-1498
23547-7382
24600-1508
21158-1498
21527-1498
21158-1499
21158-1500
23078-4938
23550-9844
23549-9844
24060-1509
24600-1509
24801-1245
24802-1245
21158-1501
21527-1501
24600-1504

SHAFT

BORE

WIDTH

2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.250
2.258
2.264
2.275
2.280
2.280
2.281
2.281
2.281
2.281
2.281
2.281
2.281
2.281
2.281
2.281
2.283
2.283
2.283
2.283
2.283
2.283
2.283
2.300
2.307
2.312
2.312
2.312
2.312
2.312
2.312
2.312

3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.625
3.625
3.625
3.625
3.625
3.750
3.258
3.250
3.275
3.280
3.280
3.000
3.062
3.147
3.150
3.154
3.347
3.500
3.543
3.623
3.623
2.835
3.150
3.150
3.346
3.543
3.835
4.409
3.300
4.331
2.997
3.000
3.000
3.000
3.062
3.062
3.062

0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.500
0.594
0.625
0.687
0.687
0.703
0.750
0.437
0.625
0.625
0.750
0.750
0.500
0.750
0.625
0.750
0.625
0.750
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.315
0.315
0.500
0.394
0.625
0.690
0.750
0.750
0.625
0.375
0.375
0.500
0.687
0.375
0.375
0.625

MODEL NO. PART NO.

62
63
66
67
68
61
62
63
63
63F1
EQ
63R1
63T2
63R1
IG
61
EQ
EQ
IG
IG
26
IG
EQ
IG
EQ
IG
63
63
63
63
63
63
63
63
63
63
92
92
EQ
92
EQ
EQ
IG
IG
EQ
63
63
63
63R2
26
63
EQ

21702-1504
21158-1504
21527-1504
21528-1504
21823-1504
24060-1505
21702-1505
21158-1505
21158-1506
23078-4735
24802-1755
23547-6757
23550-6757
23547-5528
29502-5820
24060-1511
24801-3366
24802-3366
29500-4874
29502-4874
24600-1511
29502-4813
24802-2897
29502-5734
24802-2312
29502-4338
21158-1510
21158-1513
21158-1520
21158-8363
21158-8904
21158-8364
21158-1540
21158-1543
21158-1546
21158-1548
27063-0745
27063-0635
24801-1985
27063-0642
24802-3025
24807-3657
29502-5931
29502-5825
24802-3577
21158-1552
21158-1555
21158-1557
23548-9604
24600-3300
21158-1558
24801-3239

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-37

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.312
2.313
2.313
2.313
2.313
2.313
2.313
2.317
2.327
2.335
2.341
2.344
2.344

3.062
3.125
3.125
3.125
3.125
3.150
3.187
3.189
3.246
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.347
3.350
3.350
3.371
3.372
3.372
3.438
3.481
3.481
3.500
3.500
3.500
3.500
3.500
3.543
3.625
3.750
3.750
3.751
3.751
3.751
3.812
3.250
3.250
3.313
3.313
3.313
3.355
3.375
3.250
3.335
3.151
3.062
3.062

0.690
0.375
0.375
0.500
0.500
0.375
0.690
0.375
0.375
0.375
0.500
0.500
0.500
0.500
0.687
0.687
0.687
0.750
0.375
0.375
0.500
0.625
0.375
0.500
0.625
0.375
0.500
0.375
0.500
0.500
0.625
0.750
0.375
0.625
0.625
0.750
0.375
0.500
0.687
0.750
0.625
0.625
0.625
0.625
0.750
0.625
0.750
0.500
0.750
0.750
0.375
0.375

Garlock

MODEL NO. PART NO.

EQ
26
63
61
63
63
EQ
63
63
63
25
26R1
63
EQ
61
63R2
63T2
IG
63
63
63
EQ
63
63
EQ
63
63
63
62
63
EQ
IG
63
EQ
EQ
IG
63
63
63R1
IG
EQ
EQ
EQ
EQ
IG
EQ
IG
EQ
IG
IG
63
66

24807-3237
24600-1561
21158-1561
24062-1563
21158-1563
21158-8365
24807-3645
21158-1567
21158-1570
21158-1573
25058-1575
24620-1575
21158-1575
24801-1552
24062-4958
23548-4958
23550-4958
29502-4478
21158-8366
21158-1576
21158-1578
24802-3480
21158-1579
21158-1581
24802-3582
21158-1582
21158-1584
21158-1585
21702-1587
21158-1587
24802-2632
29502-5653
21158-1588
24802-4392
24801-3267
29502-5818
21158-1594
21158-1596
23547-6043
29500-4861
24802-1552
24802-1766
24801-1351
24802-1351
29502-4257
24801-1136
29502-5059
24801-1557
29502-5801
29502-5729
21158-1597
21527-1597

SHAFT

BORE

WIDTH

2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.344
2.345
2.350
2.350
2.350
2.352
2.354
2.355
2.356
2.356
2.357
2.359
2.360
2.360
2.360
2.360
2.360
2.360
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362

3.125
3.125
3.125
3.147
3.150
3.219
3.250
3.347
3.350
3.350
3.372
3.372
3.481
3.500
3.500
3.500
3.543
3.543
3.623
3.751
3.876
3.876
3.375
3.350
3.350
3.375
3.375
3.354
3.870
3.625
3.780
3.357
2.734
3.150
3.228
3.360
3.360
3.375
4.090
2.953
2.953
2.953
2.953
3.071
3.111
3.112
3.150
3.150
3.150
3.150
3.150
3.150

0.375
0.500
0.500
0.375
0.375
0.625
0.375
0.375
0.375
0.687
0.375
0.500
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.750
0.625
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.625
0.690
0.375
0.690
0.750
0.750
0.750
0.625
0.315
0.315
0.315
0.625
0.394
0.750
0.375
0.315
0.394
0.394
0.625
0.625
0.625

MODEL NO. PART NO.

63
26
63
63
63
23
63
63
63
63R1
63
63
63
61
63
63
63
63
63
63
63
63
IG
EQ
IG
IG
IG
IG
IG
EQ
IG
EQ
EQ
61
EQ
IG
IG
IG
EQ
26R1
58
61
IG
26
IG
23
92
26
61
EQ
EQ
IG

21158-1600
24600-1602
21158-1602
21158-1603
21158-8367
25003-8276
21158-1612
21158-8368
21158-1615
23547-6941
21158-1618
21158-1620
21158-1621
24060-1624
21158-1624
21158-1626
21158-1627
21158-1629
21158-1630
21158-1633
21158-1636
21158-1638
29502-5443
24802-2618
29502-4609
29502-4687
29502-4601
29502-5076
29502-4351
24802-1943
29502-5473
24802-2951
24807-2874
24060-0653
24807-1876
29500-4883
29502-4883
29502-4693
24802-3540
24620-1605
21003-1490
24060-1490
29507-4458
24600-1565
29502-5535
25003-8905
27063-0653
24600-5115
24060-1839
24801-5431
24802-1348
29507-1348

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-38

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.363
2.363
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375

3.150
3.150
3.228
3.228
3.228
3.308
3.308
3.346
3.346
3.346
3.346
3.362
3.362
3.366
3.366
3.543
3.543
3.543
3.543
4.331
3.127
3.150
2.875
2.938
2.948
3.000
3.000
3.000
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125

0.690
0.750
0.472
0.625
0.625
0.625
0.625
0.315
0.625
0.625
0.750
0.625
0.750
0.750
0.788
0.315
0.500
0.551
0.625
0.512
0.375
0.750
0.312
0.625
0.974
0.312
0.437
0.625
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.625
0.687
0.690
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.594
0.625
0.687

MODEL NO. PART NO.

EQ
IG
26R1
EQ
EQ
IG
IG
92
EQ
EQ
IG
EQ
IG
EQSPB
IGSPB
92
EQ
26R1
EQ
58
26
IG
61
IG
IGSPB
61
61
IG
62
63
66
67
68
26
63
IG
63R2
EQ
23
26
26R1
61
61
62
63
66
62
63
EQ
63F1
EQ
63R1

24807-3639
29502-5543
24620-1606
24801-1876
24802-1876
29507-5126
29519-5126
27063-0672
24802-2651
24802-3309
29502-4191
24802-1806
29500-5512
24816-7058
29516-7136
27063-0683
24801-1870
24620-1031
24801-2488
21003-2488
24600-1568
29502-6231
24060-1512
29507-5063
29516-7081
24060-1514
24060-1523
29507-5265
21702-1639
21158-1639
21527-1639
21528-1639
21823-1639
24600-1639
21158-1641
29507-4547
23548-5968
24807-3198
25003-1642
24600-1642
24620-1642
24060-1642
24061-1642
21702-1642
21158-1642
21527-1642
21702-1644
21158-1644
24801-1644
23078-6459
24802-1645
23547-6898

SHAFT

BORE

WIDTH

2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375

3.125
3.125
3.126
3.130
3.147
3.147
3.147
3.150
3.150
3.188
3.189
3.189
3.189
3.246
3.246
3.246
3.246
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.255
3.347
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.350
3.365
3.371
3.372
3.372
3.372

0.690
0.750
0.500
0.750
0.375
0.375
0.500
0.375
0.375
0.438
0.375
0.375
0.500
0.375
0.375
0.500
0.594
0.328
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.375
0.375
0.375
0.375
0.437
0.437
0.469
0.500
0.500
0.625
0.687
0.687
0.625
0.750
0.375
0.375
0.437

MODEL NO. PART NO.

EQ
IG
EQ
IG
63
66
63
63
66
26
63
66
63
63
66
63
63F1
26
62
63
66
67
68
61
63
62
63
66
EQ
EQ
EQ
IG
IG
IG
IG
63
23
63
66
62
63
63
62
63
EQ
63R2
63T2
EQ
IG
63
66
63

24807-2831
29502-4324
24801-0716
29502-5585
21158-1645
21527-1645
21158-1647
21158-8369
21527-8369
24600-1572
21158-1648
21527-1648
21158-1650
21158-1651
21527-1651
21158-1653
23078-4746
24600-1580
21702-1654
21158-1654
21527-1654
21528-1654
21823-1654
24060-1655
21158-1655
21702-1656
21158-1656
21527-1656
24801-0738
24801-1581
24802-1581
29507-1581
29500-4112
29502-4112
29502-5081
21158-8370
25003-1657
21158-1657
21527-1657
21702-1658
21158-1658
21158-4646
21702-1659
21158-1659
24802-1776
23548-5980
23550-5980
24802-5490
29502-5161
21158-1660
21527-1660
21158-1661

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-39

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.380

3.372
3.372
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.437
3.481
3.481
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.543
3.543
3.543
3.543
3.543
3.543
3.623
3.623
3.623
3.623
3.751
3.751
3.751
3.751
3.751
3.875
3.875
3.876
3.876
3.876
3.876
3.876
4.000
5.125
3.375

0.438
0.500
0.437
0.437
0.468
0.500
0.625
0.625
0.750
0.750
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.625
0.687
0.750
0.750
0.375
0.375
0.375
0.375
0.438
0.500
0.375
0.375
0.437
0.437
0.375
0.375
0.375
0.500
0.687
0.625
0.750
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.750

Garlock

MODEL NO. PART NO.

26R1
63
61
61
25
26
EQ
EQ
IG
IG
EQ
63
66
61
62
63
66
67
68
26
62
63
EQ
EQ
63R1
63F1
IG
63
66
67
68
26R1
63
63
66
62
63
62
63
66
63
63R2
EQ
IG
63
66
94
62
63
25
54
IG

24620-1857
21158-1662
24060-1529
24061-1529
25058-1637
24600-1652
24801-1654
24802-1654
29500-4149
29502-4149
24802-3006
21158-1663
21527-1663
24060-1666
21702-1666
21158-1666
21527-1666
21528-1666
21823-1666
24600-1668
21702-1668
21158-1668
24801-1211
24802-1211
23547-4914
23078-7406
29502-4806
21158-1669
21527-1669
21528-1669
21823-1669
24620-4020
21158-1671
21158-1672
21527-1672
21702-1673
21158-1673
21702-1675
21158-1675
21527-1675
21158-1677
23548-6468
24802-4085
29500-4619
21158-1678
21527-1678
27223-1678
21702-1680
21158-1680
25058-5240
21140-6003
29502-5043

SHAFT

BORE

WIDTH

2.380
2.400
2.400
2.400
2.402
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.406
2.420
2.428
2.430
2.431
2.432
2.433
2.435
2.436
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437

3.380
3.375
3.438
3.500
3.290
3.125
3.125
3.150
3.250
3.347
3.350
3.372
3.543
3.623
3.623
3.751
3.937
4.003
3.355
3.428
3.623
3.400
3.432
4.049
4.094
3.436
2.930
2.937
3.125
3.125
3.125
3.125
3.125
3.125
3.147
3.147
3.150
3.150
3.189
3.189
3.246
3.250
3.250
3.250
3.250
3.250
3.312
3.347
3.350
3.350
3.350
3.372

0.625
0.750
0.750
0.750
0.625
0.375
0.687
0.375
0.375
0.375
0.375
0.687
0.375
0.375
0.375
0.375
0.375
0.375
0.750
0.625
0.750
0.500
0.750
0.625
0.625
0.625
0.625
0.187
0.375
0.375
0.500
0.500
0.594
0.687
0.375
0.375
0.375
0.375
0.375
0.687
0.375
0.375
0.375
0.375
0.500
0.687
0.375
0.375
0.375
0.375
0.500
0.375

MODEL NO. PART NO.

EQ
IG
IG
IG
EQ
63
63T2
63
63
63
63
63R1
63
62
63
63
63
63
IG
EQ
IG
23
IG
EQ
EQ
EQ
IG
71
62
63
62
63
63F1
63T2
26R1
63
62
63
63
63R2
63
26R1
62
63
63
63R2
23
63
62
63
63
62

24802-3064
29502-4623
29502-5289
29502-4666
24802-3108
21158-1681
23550-2494
21158-8371
21158-1693
21158-8372
21158-1696
23547-9029
21158-1708
21702-1711
21158-1711
21158-1714
21158-7926
21158-1720
29502-4705
24802-3986
29502-5687
25003-3207
29502-4847
24802-4597
24802-4896
24802-3055
29507-4890
26001-7088
21702-1723
21158-1723
21702-1725
21158-1725
23078-7633
23550-6487
24620-1726
21158-1726
21702-8373
21158-8373
21158-1729
23548-7136
21158-1732
24620-1735
21702-1735
21158-1735
21158-1737
23548-8521
25003-1736
21158-8374
21702-1738
21158-1738
21158-1740
21702-1741

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-40

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.437
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.438

3.372
3.372
3.372
3.372
3.437
3.437
3.481
3.481
3.481
3.481
3.481
3.500
3.500
3.500
3.500
3.500
3.543
3.543
3.543
3.543
3.543
3.547
3.623
3.750
3.751
3.751
3.751
3.876
3.937
4.003
4.003
4.003
4.509
4.725
2.813
2.938
3.125
3.187
3.188
3.188
3.192
3.250
3.250
3.313
3.350
3.350
3.375
3.375
3.431
3.438
3.438
3.481

0.375
0.437
0.500
0.594
0.625
0.750
0.375
0.437
0.500
0.625
0.687
0.375
0.375
0.500
0.594
0.687
0.375
0.375
0.437
0.500
0.500
0.500
0.375
0.750
0.375
0.500
0.687
0.375
0.375
0.375
0.500
0.500
0.625
0.725
0.625
0.690
0.690
1.125
0.945
1.102
1.062
0.375
0.625
0.750
0.625
0.625
0.375
0.500
0.625
0.625
0.750
0.500

MODEL NO. PART NO.

63
63
63
63F1
EQ
IG
63
63
63
EQ
63R2
62
63
63
63F1
63T2
62
63
63
62
63
26
63
IG
63
63
63T2
63
63
63
62
63
EQ
IG
IG
EQ
EQ
EQSPB
IGSPB
IGSPB
EQSPB
23
EQ
IG
EQ
IG
61
61
EQ
EQ
IG
26

21158-1741
21158-1742
21158-1743
23078-6270
24802-1641
29502-4280
21158-1744
21158-1745
21158-1746
24802-4358
23548-7238
21702-1747
21158-1747
21158-1749
23078-7285
23550-6541
21702-1750
21158-1750
21158-1751
21702-1752
21158-1752
24600-1621
21158-1753
29502-5288
21158-1756
21158-1758
23550-7167
21158-1759
21158-7927
21158-1762
21702-1764
21158-1764
24802-3380
29500-4872
29507-5406
24807-3748
24807-1912
24816-2564
29516-7069
29516-7082
24816-7004
25003-1735
24802-1942
29502-2141
24802-3294
29519-3294
24060-1537
24062-1538
24801-3455
24801-1641
29500-4280
24600-1746

SHAFT

BORE

WIDTH

2.438
2.438
2.438
2.438
2.438
2.438
2.438
2.440
2.440
2.441
2.441
2.441
2.441
2.441
2.441
2.441
2.441
2.441
2.450
2.469
2.469
2.469
2.469
2.469
2.469
2.469
2.469
2.469
2.480
2.480
2.480
2.480
2.489
2.490
2.498
2.499
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500

3.500
3.500
3.500
3.500
3.500
3.500
3.876
3.250
3.440
2.992
3.150
3.150
3.346
3.346
3.346
3.441
3.543
3.948
3.450
3.189
3.250
3.347
3.350
3.350
3.500
3.500
3.543
3.937
3.268
3.480
3.480
3.543
3.250
2.875
3.368
3.542
2.875
3.000
3.000
3.000
3.000
3.000
3.062
3.125
3.125
3.125
3.125
3.125
3.125
3.188
3.188
3.189

0.375
0.437
0.500
0.500
0.625
0.625
0.700
0.500
0.625
0.625
0.394
0.394
0.394
0.394
0.625
0.750
0.394
0.750
0.750
0.375
0.375
0.375
0.375
0.437
0.375
0.594
0.375
0.375
0.625
0.750
0.750
0.625
0.312
0.625
0.750
0.500
0.109
0.250
0.250
0.375
0.625
0.690
0.250
0.250
0.312
0.312
0.312
0.500
0.500
0.375
1.102
0.375

MODEL NO. PART NO.

61
61
23
26
EQ
EQ
IGSPB
26
EQ
IG
61
61
23
92
EQ
IG
92
IG
IG
63
63
63
63
63
63
63F1
63
63
IG
IG
IG
EQ
26
IG
IG
26
71
91
92
61
IG
EQ
76
71
26
26R1
61
61
61
26
IGSPB
62

24060-1747
24060-1539
25003-1749
24600-1749
24801-3491
24802-3491
29516-7139
24600-1685
24802-3154
29507-5139
24060-8373
24064-8373
25003-0793
27063-0793
24801-5488
29502-4846
27063-0684
29500-4476
29502-4887
21158-1765
21158-1771
21158-8375
21158-1774
21158-1775
21158-1783
23078-8105
21158-1786
21158-7928
29519-5756
29500-5569
29502-5569
24802-3568
24600-1757
29507-5316
29502-5628
24600-1623
26001-6292
27023-9014
27063-9014
24063-2239
29507-5649
24807-5809
26193-7532
26001-7089
24600-1686
24620-1686
24060-1541
24060-1542
24061-1542
24600-1801
29516-7083
21702-1801

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-41

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500

3.189
3.189
3.189
3.189
3.189
3.189
3.189
3.189
3.189
3.192
3.194
3.228
3.246
3.246
3.246
3.246
3.246
3.246
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.251
3.251
3.347
3.350
3.350
3.350
3.350
3.350
3.372
3.372
3.372
3.372
3.372
3.372
3.375

0.375
0.375
0.375
0.375
0.437
0.500
0.625
0.625
0.690
1.062
0.375
0.315
0.375
0.375
0.375
0.375
0.437
0.500
0.250
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.594
0.625
0.687
0.687
0.750
0.750
0.375
0.625
0.375
0.250
0.375
0.375
0.469
0.500
0.375
0.375
0.375
0.500
0.594
0.687
0.375

Garlock

MODEL NO. PART NO.

63
66
67
68
63
63
EQ
IG
EQ
EQSPB
23
26
23
63
66
68
63
63
71
23
25
62
63
66
67
68
61
63
25
63
EQ
63F1
IG
63R2
63T2
IG
IG
3
EQ
63
26
63
66
63
63
62
63
66
63
63F1
66R1
23

21158-1801
21527-1801
21528-1801
21823-1801
21158-1802
21158-1803
24802-2016
29507-2016
24807-2025
24816-7035
25003-4599
24600-3216
25003-1804
21158-1804
21527-1804
21823-1804
21158-1805
21158-1806
26001-7090
25003-1807
25058-1807
21702-1807
21158-1807
21527-1807
21528-1807
21823-1807
24060-1808
21158-1808
25058-1809
21158-1809
24801-1809
23078-6506
29507-0991
23548-7564
23550-7564
29500-4111
29502-4111
28003-2536
24802-0991
21158-8376
24600-1787
21158-1810
21527-1810
21158-1811
21158-1812
21702-1813
21158-1813
21527-1813
21158-1815
23078-9093
23722-8728
25003-9691

SHAFT

BORE

WIDTH

2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500

3.375
3.375
3.375
3.375
3.418
3.433
3.438
3.481
3.481
3.481
3.481
3.481
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.540
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543

0.437
0.500
0.625
0.625
0.438
0.625
0.625
0.375
0.375
0.375
0.437
0.500
0.312
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.437
0.437
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.750
0.750
0.500
0.375
0.375
0.375
0.375
0.437
0.500
0.594
0.625
0.687
0.687
0.750
0.750

MODEL NO. PART NO.

61
EQ
EQ
EQ
23
EQ
EQ
62
63
66
63
63
61
23
26R1
62
63
66
67
68
23
26
61
63
23
26
62
63
EQ
EQ
IG
IG
63R1
63R2
63T2
63F1
63R1
IG
IG
EQ
63
66
67
68
63
63
63F1
EQ
63R2
63T2
IG
IG

24060-1544
24801-1788
24801-1212
24802-1212
25003-4882
24802-3004
24801-5785
21702-1816
21158-1816
21527-1816
21158-1817
21158-1818
24060-1545
25003-1819
24620-1819
21702-1819
21158-1819
21527-1819
21528-1819
21823-1819
25003-1820
24600-1820
24060-1820
21158-1820
25003-1821
24600-1821
21702-1821
21158-1821
24801-1818
24802-1818
29507-1818
29519-1818
23547-6465
23548-6465
23550-6465
23078-5387
23547-5387
29500-4150
29502-4150
24801-1823
21158-1822
21527-1822
21528-1822
21823-1822
21158-1823
21158-1824
23078-8573
24802-2662
23548-4844
23550-4844
29500-4683
29502-4683

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-42

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500

3.550
3.562
3.623
3.623
3.623
3.623
3.623
3.623
3.623
3.625
3.625
3.625
3.625
3.625
3.671
3.725
3.750
3.750
3.750
3.750
3.750
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.875
3.875
3.876
3.876
3.876
3.937
3.937
4.000
4.000
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.250
4.375
4.375
4.500

0.625
0.625
0.375
0.375
0.437
0.437
0.500
0.625
0.750
0.625
0.625
0.640
0.687
0.750
0.375
0.625
0.375
0.375
0.687
0.750
0.750
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.687
0.687
0.687
0.468
0.750
0.375
0.375
0.687
0.375
0.375
0.500
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.687
0.625
0.625
0.750
0.437

MODEL NO. PART NO.

EQ
EQ
63
66
26
63
63
EQ
IG
EQ
EQ
IG
63R2
IG
63
EQ
26
61
26R1
IG
IG
62
63
66
67
68
63
63
63R2
63T2
67R2
26R1
IG
63
66
63R2
62
63
26
IG
26
62
63
66
67
68
63
63R2
EQ
EQ
IG
61

24801-1156
24802-3007
21158-1825
21527-1825
24600-1826
21158-1826
21158-1827
24801-1252
29502-5042
24801-1951
24802-1951
29519-5643
23548-8930
29502-5793
21158-5080
24801-3061
24600-1828
24060-1828
24620-3987
29500-4374
29502-4374
21702-1828
21158-1828
21527-1828
21528-1828
21823-1828
21158-1829
21158-1830
23548-6566
23550-6566
23683-6566
24620-5758
29502-5045
21158-1831
21527-1831
23548-4734
21702-4845
21158-4845
24600-1794
29502-5143
24600-3988
21702-1834
21158-1834
21527-1834
21528-1834
21823-1834
21158-1836
23548-6966
24801-4631
24802-1834
29502-4353
24060-1547

SHAFT

BORE

WIDTH

2.500
2.500
2.500
2.500
2.505
2.519
2.520
2.520
2.520
2.530
2.530
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.531
2.540
2.543
2.550
2.550
2.554
2.554
2.556
2.558
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559

4.724
4.875
4.937
5.118
3.505
3.464
3.150
3.740
4.250
3.287
3.287
3.246
3.250
3.250
3.347
3.372
3.481
3.500
3.543
3.543
3.623
3.751
3.876
3.937
4.003
4.725
4.725
3.540
3.543
3.550
3.550
3.375
3.554
3.556
3.558
3.150
3.228
3.346
3.346
3.346
3.346
3.346
3.464
3.465
3.500
3.543
3.543
3.543
3.543
3.543
3.543
3.583

0.750
0.750
0.750
0.750
0.625
0.472
0.315
0.750
0.625
0.690
0.750
0.375
0.375
0.437
0.375
0.375
0.375
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.375
0.375
0.750
0.625
0.625
0.750
0.750
0.750
0.625
0.750
0.394
0.625
0.394
0.394
0.394
0.625
0.750
0.472
0.625
0.625
0.375
0.394
0.394
0.625
0.750
0.750
0.625

MODEL NO. PART NO.

IG
IG
IG
IG
EQ
26
92
IG
EQ
EQ
IG
63
63
63
63
63
63
63
63
63
63
63
63
63
63
26R1
94
IG
IG
EQ
IG
IG
IG
IG
IG
61
IG
23
61
92
EQ
IG
26R1
EQ
EQ
23
61
92
EQ
IG
IG
IG

29502-5558
29502-5778
29500-4592
29502-5579
24802-3099
24600-0829
27063-0698
29500-4747
24801-4195
24807-4132
29502-4483
21158-1837
21158-1840
21158-1841
21158-8377
21158-1846
21158-1849
21158-1852
21158-1855
21158-1857
21158-1858
21158-1863
21158-1864
21158-7929
21158-1867
24620-3459
27223-8959
29502-5001
29507-5013
24802-3234
29502-5718
29502-5706
29502-4772
29507-5016
29502-4630
24060-1847
29507-5544
25003-0710
24060-0710
27063-0710
24802-2816
29502-4532
24620-1859
24802-1858
24802-1807
25003-9162
24060-0729
27063-0729
24802-1883
29500-4721
29502-4721
29519-3114

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-43

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.559
2.560
2.560
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.562
2.563
2.563
2.563
2.569

3.583
3.620
3.740
3.760
3.937
4.134
4.331
4.724
3.544
3.560
3.246
3.250
3.250
3.347
3.372
3.437
3.437
3.439
3.481
3.481
3.500
3.500
3.500
3.500
3.500
3.502
3.543
3.543
3.562
3.562
3.562
3.562
3.623
3.623
3.623
3.623
3.751
3.751
3.751
3.876
3.876
3.937
3.937
4.003
4.003
4.125
4.725
5.512
3.198
3.500
3.512
3.569

0.750
0.625
0.394
0.788
0.750
0.750
0.750
0.750
0.315
0.625
0.375
0.375
0.687
0.375
0.375
0.500
0.625
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.594
0.625
0.375
0.500
0.625
0.625
0.625
0.750
0.375
0.437
0.437
0.500
0.375
0.375
0.500
0.375
0.500
0.375
0.375
0.375
0.500
0.625
0.375
0.375
0.974
0.375
0.625
0.625

Garlock

MODEL NO. PART NO.

IG
EQ
92
IGSPB
IG
IG
IG
IG
63
EQ
63
63
63R2
63
63
EQ
EQ
23
62
63
23
63
63
63
63F1
EQ
63
63
EQ
EQ
IG
IG
63
62
63
63
23
63
63
63
63
63
94
63
63
EQ
94
94
IGSPB
26
EQ
EQ

29502-5795
24802-3735
27063-0733
29516-5411
29502-4966
29502-5646
29500-5367
29502-5803
21158-1861
24802-3170
21158-1870
21158-1873
23548-6641
21158-8378
21158-1879
24801-1129
24802-1098
25003-2617
21072-1882
21158-1882
25003-1885
21158-1885
21158-1886
21158-1887
23078-6700
24801-1887
21158-1888
21158-1890
24801-1251
24802-1251
29507-1251
29502-4281
21158-1891
21702-1892
21158-1892
21158-1893
25003-1894
21158-1894
21158-1896
21158-1897
21158-1899
21158-6300
27223-6300
21158-1900
21158-1902
24802-3244
27223-6301
27223-6302
29516-7079
24600-1627
24802-1887
24802-3016

SHAFT

BORE

WIDTH

2.570
2.594
2.598
2.619
2.622
2.622
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625

3.250
3.350
3.386
3.682
3.046
3.346
3.250
3.250
3.250
3.250
3.250
3.250
3.350
3.350
3.350
3.350
3.350
3.371
3.372
3.372
3.372
3.372
3.374
3.375
3.375
3.375
3.375
3.375
3.481
3.481
3.484
3.489
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.543
3.543
3.543

0.375
0.375
0.500
0.750
0.690
0.690
0.187
0.312
0.375
0.375
0.625
0.625
0.375
0.375
0.469
0.500
0.594
0.625
0.375
0.375
0.375
0.500
0.719
0.375
0.437
0.437
0.625
0.625
0.375
0.375
0.750
0.625
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.375
0.375
0.375

MODEL NO. PART NO.

61
62
EQ
IG
EQ
EQ
71
61
61
61
IG
IG
63
66
63
63
63F1
EQ
62
63
66
63
63F1
63
26
61
EQ
EQ
63
66
IG
EQ
23
25
26
61
62
63
66
23
63
EQ
EQ
EQ
63R1
63R2
63T2
63T2
IG
23
63
66

24060-2266
21702-1903
24801-1747
29502-5154
24807-3831
24807-3835
26001-7092
24060-1549
24060-1550
24061-1550
29507-1976
29507-1976
21158-1930
21527-1930
21158-5398
21158-1932
23078-6866
24802-2520
21702-1933
21158-1933
21527-1933
21158-1935
23078-5686
21158-5407
24600-1838
24060-1551
24801-1962
24802-1962
21158-1936
21527-1936
29502-4332
24802-1203
25003-1939
25058-1939
24600-1939
24060-1939
21702-1939
21158-1939
21527-1939
25003-1941
21158-1941
24801-1941
24801-1893
24802-1893
23547-7187
23548-7187
23550-7187
23550-5257
29502-4438
25003-1942
21158-1942
21527-1942

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-44

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625
2.625

3.543
3.543
3.623
3.623
3.623
3.623
3.623
3.623
3.623
3.623
3.623
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.628
3.670
3.675
3.677
3.677
3.683
3.688
3.688
3.750
3.750
3.750
3.750
3.750
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.876
3.876
3.876
3.937
4.000
4.003
4.003
4.003
4.003
4.003
4.003
4.050

0.500
0.750
0.375
0.375
0.375
0.375
0.437
0.469
0.500
0.500
0.594
0.375
0.437
0.438
0.500
0.625
0.625
0.687
0.687
0.750
0.625
0.750
0.750
0.625
0.750
0.625
0.625
0.750
0.500
0.500
0.625
0.750
0.750
0.375
0.375
0.375
0.500
0.687
0.687
0.687
0.375
0.375
0.437
0.375
0.750
0.375
0.375
0.437
0.500
0.687
0.750
0.750

MODEL NO. PART NO.

63
IG
25
62
63
66
63
63
62
63
63F1
23
61
26
23
EQ
EQ
63R1
63R2
IG
EQ
IG
IG
EQ
IG
EQ
EQ
IG
26
EQ
EQ
IG
IG
62
63
66
63
63R2
63T2
66R2
63
66
63
63
IG
63
66
63
63
63R2
IG
IG

21158-1944
29502-5163
25058-1945
21702-1945
21158-1945
21527-1945
21158-1946
21158-5581
21702-1947
21158-1947
23078-7776
25003-1958
24060-1842
24600-1842
25003-1844
24801-1841
24802-1841
23547-5483
23548-5483
29502-4151
24801-2014
29502-5080
29502-4179
24802-1086
29502-4125
24802-3650
24802-1087
29502-4126
24600-1950
24801-1950
24802-1162
29500-5772
29502-5772
21702-1948
21158-1948
21527-1948
21158-1950
23548-6651
23550-6651
23702-6651
21158-1951
21527-1951
21158-1952
21158-7800
29502-5073
21158-1954
21527-1954
21158-1955
21158-1956
23548-6800
29502-5065
29502-5472

SHAFT

BORE

WIDTH

2.625
2.628
2.650
2.656
2.656
2.656
2.656
2.656
2.656
2.675
2.676
2.677
2.677
2.677
2.677
2.685
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.687
2.688
2.688

5.250
3.750
3.630
3.543
3.623
3.751
3.937
4.003
4.003
3.350
3.362
3.543
3.543
3.937
4.000
3.998
3.372
3.372
3.375
3.481
3.500
3.500
3.500
3.500
3.500
3.543
3.623
3.623
3.623
3.687
3.687
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.876
3.876
3.876
3.876
3.876
3.881
3.937
4.000
4.003
4.003
4.003
4.003
3.372
3.500

0.750
0.625
0.625
0.375
0.375
0.375
0.375
0.375
0.625
0.375
0.625
0.394
0.500
0.394
0.750
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.594
0.625
0.375
0.375
0.500
0.687
0.375
0.625
0.375
0.437
0.500
0.500
0.500
0.594
0.687
0.375
0.437
0.500
0.594
0.687
0.468
0.375
0.375
0.375
0.375
0.500
0.687
0.375
0.375

MODEL NO. PART NO.

IG
EQ
EQ
63
63
63
63
63
EQ
61
IG
92
EQ
92
IG
IG
62
63
61
63
62
63
63
63F1
EQ
63
63
63
63R2
23
EQ
63
63
26
62
63
63F1
63R1
63
63
63
63F1
63T2
23
63
94
62
63
63
63T2
26
61

29502-5815
24802-1740
24802-3514
21158-1969
21158-1972
21158-1975
21158-7931
21158-1981
24802-2635
24060-2451
29507-4484
27063-0735
24801-1984
27063-0749
29502-5773
29502-4541
21702-1987
21158-1987
24060-2920
21158-1990
21702-1993
21158-1993
21158-1994
23078-6244
24802-2003
21158-1996
21158-1999
21158-2001
23548-9040
25003-9510
24802-2736
21158-2002
21158-2003
24600-2004
21702-2004
21158-2004
23078-8679
23547-7210
21158-2005
21158-2006
21158-2007
23078-9694
23550-5886
25003-2013
21158-7932
27223-7217
21702-2008
21158-2008
21158-2010
23550-6589
24600-1987
24060-1993

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-45

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.688
2.688
2.688
2.688
2.688
2.688
2.710
2.717
2.718
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.719
2.726
2.726
2.746
2.746
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750

3.543
3.563
3.574
3.625
3.688
3.875
3.710
3.752
3.700
3.481
3.481
3.500
3.500
3.543
3.623
3.623
3.751
3.751
3.751
3.876
3.937
4.003
4.003
4.003
4.003
3.500
3.726
3.746
3.746
3.125
3.125
3.250
3.375
3.375
3.375
3.481
3.481
3.481
3.481
3.481
3.481
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500

0.625
1.102
1.062
0.500
0.750
0.468
0.750
0.625
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.500
0.500
0.375
0.375
0.375
0.500
0.594
0.750
0.625
0.625
0.750
0.109
0.187
0.625
0.312
0.312
0.437
0.375
0.375
0.375
0.375
0.375
0.500
0.250
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375

Garlock

MODEL NO. PART NO.

EQ
IGSPB
EQSPB
61
IG
26
IG
EQ
IG
63
66
63
66
63
63
66
63
66
63
63
63
63
66
63
63F1
IG
EQ
IG
IG
71
71
IG
26
61
61
62
63
66
67
68
63
26
3
23
26
26R1
61
62
63
66
67
68

24802-3023
29516-7094
24816-7021
24063-1230
29502-4282
24600-1848
29502-4818
24802-2010
29502-5404
21158-2011
21527-2011
21158-2014
21527-2014
21158-2017
21158-2020
21527-2020
21158-2023
21527-2023
21158-2025
21158-2028
21158-7933
21158-2029
21527-2029
21158-2031
23078-5693
29502-5420
24802-4469
29507-5014
29502-4589
26001-7093
26001-6304
29507-4793
24600-2020
24060-1553
24060-1554
21702-2032
21158-2032
21527-2032
21528-2032
21823-2032
21158-2034
24600-0795
28003-2683
25003-2035
24600-2035
24620-2035
24060-2035
21702-2035
21158-2035
21527-2035
21528-2035
21823-2035

SHAFT

BORE

WIDTH

2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750

3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.560
3.623
3.623
3.623
3.623
3.623
3.623
3.623
3.625
3.625
3.625
3.625
3.625
3.625
3.720
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750

0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.594
0.625
0.625
0.625
0.687
0.690
0.750
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.625
0.690
0.375
0.375
0.375
0.375
0.375
0.437
0.500
0.438
0.438
0.438
0.625
0.625
0.750
0.750
0.375
0.375
0.438
0.438
0.500
0.500
0.500
0.500
0.500
0.625
0.750

MODEL NO. PART NO.

63
26
26R1
61
61
63
66
EQ
94
63F1
EQ
IG
IG
63R2
EQ
IG
62
63
66
67
68
26
63
63
EQ
EQ
EQ
62
63
66
67
68
63
63
23
26
26R1
EQ
EQ
IG
IG
23
61
26
26R1
23
25
26
61
66
EQ
IG

21158-2036
24600-2037
24620-2037
24060-2037
24061-2037
21158-2037
21527-2037
24801-2037
27223-5572
23078-7829
24802-1238
29507-1238
29519-1238
23548-6716
24807-3779
29502-4187
21702-2038
21158-2038
21527-2038
21528-2038
21823-2038
24600-2039
21158-2039
21158-2040
24801-1041
24802-1242
24807-2830
21702-2041
21158-2041
21527-2041
21528-2041
21823-2041
21158-2042
21158-2043
25003-2054
24600-2054
24620-2054
24801-2264
24802-2264
29502-4708
29502-5005
25003-2057
24060-2057
24600-2058
24620-2058
25003-6471
25058-6471
24600-6471
24060-6471
21527-6471
24802-1250
29500-4152

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-46

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750
2.750

3.750
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.755
3.772
3.875
3.875
3.875
3.875
3.875
3.876
3.876
3.876
3.876
3.876
3.876
3.876
3.881
3.937
3.983
4.000
4.000
4.000
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.125
4.125
4.375
4.533
4.625
5.000
6.000

0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.687
0.687
0.687
0.687
0.750
0.500
1.000
0.375
0.500
0.500
0.625
0.625
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.750
0.375
0.500
0.500
0.625
0.750
0.375
0.375
0.375
0.375
0.469
0.500
0.500
0.687
0.438
0.625
0.625
0.625
0.625
0.500
0.625

MODEL NO. PART NO.

IG
3
23
62
63
66
67
68
62
63
62
63
26
63R1
63R2
63T2
63F1
EQ
EQSPB
3
61
EQ
EQ
EQ
62
63
66
62
63
62
63
26R1
63
23
23
EQ
IG
63
66
67
68
26
62
63
63R2
26
EQ
EQ
EQ
26
61
54

29502-4152
28003-2710
25003-2044
21702-2044
21158-2044
21527-2044
21528-2044
21823-2044
21702-2045
21158-2045
21702-2046
21158-2046
24600-2033
23547-6467
23548-6467
23550-6467
23078-7339
24801-1147
24816-7042
28003-2719
24060-2049
24801-0901
24801-2062
24802-2062
21702-2047
21158-2047
21527-2047
21702-2048
21158-2048
21702-2049
21158-2049
24620-9094
21158-7934
25003-1086
25003-2030
24802-2957
29502-4706
21158-2050
21527-2050
21528-2050
21823-2050
24600-2065
21702-2052
21158-2052
23548-7177
24600-2068
24802-2634
24802-3174
24802-3381
24600-2021
24060-1559
21140-6005

SHAFT

BORE

WIDTH

2.755
2.755
2.755
2.755
2.755
2.755
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.775
2.781
2.795
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812

3.543
3.622
3.741
3.741
3.750
3.755
3.346
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.622
3.622
3.740
3.937
3.937
3.937
3.937
4.331
4.331
3.775
3.500
3.465
3.500
3.500
3.543
3.560
3.569
3.580
3.623
3.623
3.751
3.751
3.751
3.751
3.751
3.812
3.875
3.876
3.876
3.876
3.876
3.937
4.002
4.003
4.003
4.003

0.375
0.472
0.625
0.625
0.625
0.625
0.315
0.237
0.394
0.394
0.472
0.472
0.500
0.625
0.625
0.750
0.500
0.625
0.750
0.394
0.500
0.625
0.625
0.500
0.625
0.750
0.375
0.472
0.375
0.375
0.375
0.375
1.375
0.625
0.375
0.500
0.375
0.375
0.500
0.500
0.687
0.750
0.469
0.375
0.437
0.437
0.500
0.375
0.750
0.375
0.437
0.500

MODEL NO. PART NO.

23
26R1
EQ
IG
EQ
EQ
26R1
26
26
61
26R1
61
EQ
EQ
EQ
IG
EQ
EQ
IG
92
EQ
EQ
EQ
26
EQ
IG
26
26
62
63
63
23
EQSPB
EQ
63
63
62
63
62
63
63R2
IG
63
63
23
63
63
63
IG
63
63
63

25003-4765
24620-2027
24802-3107
29507-3107
24802-1810
24802-3012
24620-2026
24600-2071
24600-2070
24060-2038
24620-1032
24060-2814
24801-2067
24801-2919
24802-2059
29502-4969
24801-2078
24802-5095
29502-4192
27063-0759
24801-2087
24801-2250
24802-2250
24600-2274
24802-3989
29502-5647
24600-0845
24600-2077
21702-2077
21158-2077
21158-2080
25003-0806
24816-7032
24802-1982
21158-2083
21158-2085
21702-2086
21158-2086
21702-2088
21158-2088
23548-7159
29502-4283
21158-7143
21158-2089
25003-2090
21158-2090
21158-2091
21158-7936
29500-4834
21158-2092
21158-2093
21158-2094

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-47

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.812
2.813
2.813
2.813
2.813
2.819
2.820
2.835
2.835
2.835
2.835
2.844
2.844
2.844
2.844
2.844
2.844
2.844
2.844
2.844
2.850
2.857
2.863
2.863
2.874
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875

4.003
3.563
3.750
3.751
3.751
3.813
3.843
3.543
3.740
3.740
3.937
3.623
3.623
3.623
3.751
3.751
3.751
3.751
3.937
4.003
3.650
3.857
4.724
4.724
3.543
3.375
3.500
3.500
3.500
3.563
3.623
3.623
3.623
3.623
3.623
3.625
3.625
3.625
3.625
3.625
3.750
3.750
3.750
3.750
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751

0.594
1.102
0.375
0.438
0.625
0.750
0.750
0.394
0.375
0.394
0.394
0.375
0.375
0.500
0.375
0.375
0.500
0.500
0.375
0.375
0.625
0.375
0.500
0.500
0.393
0.625
0.312
0.312
0.625
1.102
0.375
0.375
0.375
0.437
0.500
0.375
0.438
0.625
0.625
0.750
0.375
0.625
0.625
0.750
0.250
0.375
0.375
0.375
0.500
0.500
0.500
0.687

Garlock

MODEL NO. PART NO.

63F1
IGSPB
61
61
EQ
IG
IG
92
23
92
92
62
63
63
62
63
62
63
63
63
EQ
23
63
76
61
IG
26
61
IG
IG
23
62
63
63
63
23
23
EQ
EQ
IG
23
EQ
EQ
IG
26R1
3
62
63
26
62
63
63R1

23078-9070
29516-7085
24060-7159
24060-2526
24801-2676
29502-5329
29502-5396
27063-0770
25003-1039
27063-0776
27063-0791
21702-2098
21158-2098
21158-2100
21702-2101
21158-2101
21702-2103
21158-2103
21158-7937
21158-2107
24801-4741
25003-0128
21158-6627
26193-6627
24060-2508
29507-5062
24600-2114
24060-1556
29507-4564
29516-7077
25003-2115
21702-2115
21158-2115
21158-2116
21158-2117
25003-2110
25003-2111
24801-2086
24802-2086
29502-4548
25003-2118
24801-1081
24802-1081
29502-4479
24620-4021
28003-2782
21702-2118
21158-2118
24600-2120
21702-2120
21158-2120
23547-6730

SHAFT

BORE

WIDTH

2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.875
2.880
2.880
2.883
2.900
2.901
2.906
2.906
2.906
2.906
2.906
2.906
2.906
2.925

3.751
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.876
3.876
3.876
3.876
3.937
4.000
4.000
4.000
4.000
4.000
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.125
4.125
4.125
4.125
4.125
4.134
4.250
4.375
4.380
4.625
4.625
3.625
3.625
3.633
3.900
3.601
3.623
3.751
3.876
3.937
4.003
4.125
4.125
3.925

0.687
0.375
0.375
0.375
0.500
0.625
0.625
0.750
0.375
0.437
0.500
0.687
0.375
0.468
0.500
0.625
0.750
0.750
0.375
0.375
0.437
0.500
0.594
0.625
0.625
0.687
0.687
0.687
0.406
0.469
0.500
0.719
0.750
0.750
0.750
0.625
0.625
0.625
0.750
0.375
0.375
0.375
0.625
0.232
0.375
0.437
0.375
0.375
0.375
0.406
0.469
0.750

MODEL NO. PART NO.

63R2
3
23
26
61
EQ
EQ
IG
63
63
63
63R2
63
26
61
EQ
IG
IG
62
63
63
63
63F1
EQ
EQ
63R2
63T2
66R2
63
63
23
63F1
IG
IG
IG
EQ
EQ
EQ
IG
61
61
23
EQ
26
63
63
63
63
63
63
63
IG

23548-6730
28003-2791
25003-2121
24600-2121
24060-2123
24801-1268
24802-1268
29502-4153
21158-2121
21158-2122
21158-2123
23548-1171
21158-7938
24600-2113
24060-1560
24802-2843
29500-4331
29502-4331
21702-2124
21158-2124
21158-2125
21158-2126
23078-6680
24801-1205
24802-1205
23548-6599
23550-6599
23702-6599
21158-2127
21158-2128
25003-5127
23078-6762
29502-4215
29500-4694
29502-5312
24802-5069
24802-1878
24802-3093
29502-4386
24060-2059
24061-2059
25003-0993
24802-3137
24600-2137
21158-2129
21158-2133
21158-2135
21158-7939
21158-2138
21158-2141
21158-2142
29502-5469

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-48

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.932
2.932
2.932
2.933
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937
2.937

3.806
3.806
3.932
3.750
3.623
3.623
3.623
3.623
3.623
3.625
3.625
3.687
3.688
3.750
3.751
3.751
3.751
3.751
3.751
3.817
3.875
3.876
3.876
3.876
3.876
3.876
3.906
3.937
3.937
3.937
3.937
3.937
3.937
4.000
4.000
4.000
4.000
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.125
4.125
4.125
4.125

0.625
0.690
0.625
0.625
0.375
0.375
0.500
0.687
0.690
0.375
0.690
0.375
0.500
0.625
0.375
0.375
0.437
0.437
0.500
1.062
0.500
0.375
0.375
0.437
0.500
0.687
0.484
0.375
0.375
0.375
0.375
0.500
0.500
0.375
0.500
0.500
0.750
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.594
0.625
0.687
0.687
0.406
0.562
0.719
0.719

MODEL NO. PART NO.

EQ
EQ
EQ
EQ
62
63
63
63R2
EQ
26
EQ
23
EQ
EQ
62
63
62
63
63
EQSPB
26
23
63
63
63
63R1
23
23
61
62
63
23
23
23
23
EQ
IG
25
63
23
63
25
62
63
63F1
EQ
63R1
63TF
63
63
63F1
63T2

24802-3493
24807-3504
24802-3513
24802-3086
21702-2143
21158-2143
21158-2145
23548-8863
24807-2138
24600-2144
24807-2153
25003-7833
24801-2145
24802-1980
21702-2146
21158-2146
21702-2147
21158-2147
21158-2148
24816-7022
24600-2151
25003-2149
21158-2149
21158-2150
21158-2151
23547-8470
25003-8488
25003-7596
24060-7596
21702-7596
21158-7596
25003-2140
25003-6351
25003-8385
25003-0917
24801-2167
29500-4648
25058-2152
21158-2152
25003-2153
21158-2153
25058-2154
21702-2154
21158-2154
23078-6585
24802-0997
23547-6588
23735-6588
21158-2155
21158-9481
23078-7722
23550-7722

SHAFT

BORE

WIDTH

2.937
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.938
2.942
2.950
2.950
2.950
2.950
2.950
2.952
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953

4.480
3.544
3.623
3.625
3.688
3.750
3.750
3.750
3.750
3.750
3.812
3.813
3.817
3.875
3.875
3.875
3.875
3.905
3.938
3.938
3.938
3.940
3.956
4.000
4.000
4.000
4.003
4.003
4.008
4.064
4.125
4.173
4.295
4.500
3.942
3.460
3.950
3.960
4.000
4.250
4.000
3.543
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.937
3.937

1.062
0.625
0.625
0.312
0.625
0.375
0.375
0.375
0.500
0.750
0.625
1.007
1.000
0.375
0.437
0.500
0.625
0.484
0.500
0.625
0.750
1.062
1.375
0.500
0.500
0.750
0.375
0.750
0.468
0.500
0.750
0.879
0.750
0.750
0.750
0.625
0.750
0.625
0.750
0.625
0.625
0.394
0.394
0.511
0.512
0.625
0.625
0.690
0.750
0.750
0.375
0.375

MODEL NO. PART NO.

EQSPB
IG
IG
61
EQ
23
26
61
61
IG
EQ
IGSPB
IGSPB
61
61
61
IG
23
EQ
EQ
IG
IGSPB
EQSPB
23
61
IG
23
IG
26
23
IG
IGSPB
IG
IG
IG
IG
IG
EQ
IG
EQ
EQ
61
92
26
61
EQ
IG
EQ
IG
IG
23
61

24816-7060
29507-5153
29507-4522
24060-1562
24801-1908
25003-2146
24600-2146
24060-2146
24060-2148
29502-4850
24802-1142
29516-7095
29516-4832
24060-2149
24060-2150
24060-2151
29519-5806
25003-1256
24801-2159
24802-2083
29502-4284
29516-7106
24816-7017
25003-0895
24060-0917
29502-4594
25003-2152
29502-5127
24600-2081
25003-2946
29502-4544
29516-7115
29502-4838
29502-5413
29502-4770
29507-4398
29502-5697
24802-3519
29502-5742
24802-3736
24802-1811
24062-2377
27063-0797
24600-3663
24060-1848
24802-3316
29507-3316
24807-3312
29500-4822
29502-4822
25003-2966
24060-2966

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-49

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.953
2.955
2.969
2.969
2.969
2.969
2.969
2.969
2.977
2.990
2.990
2.997
2.998
2.998
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000

3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.976
4.175
4.213
4.213
4.213
4.331
4.331
4.528
4.528
4.724
3.500
3.751
3.751
3.876
3.937
4.003
4.125
3.959
3.750
4.000
3.831
3.515
3.998
3.406
3.500
3.500
3.500
3.500
3.625
3.625
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.751
3.751
3.751
3.751
3.751
3.751

0.394
0.394
0.500
0.512
0.512
0.625
0.625
0.750
0.696
0.750
0.492
0.492
0.500
0.472
0.750
0.375
0.472
0.472
0.625
0.375
0.687
0.375
0.375
0.375
0.406
0.500
0.750
0.750
0.750
0.690
0.625
0.203
0.250
0.250
0.625
0.690
0.312
0.437
0.375
0.438
0.500
0.625
0.625
0.625
0.750
0.750
0.375
0.375
0.375
0.375
0.375
0.375

Garlock

MODEL NO. PART NO.

61
92
EQ
26
58
EQ
EQ
IG
IGSPB
IG
23
26
23
92
IG
94
26R1
92
IG
63
63T2
63
63
63
63
23
IG
IG
IG
EQ
EQ
91
71
92
IG
EQ
61
61
61
61
61
EQ
EQ
IG
IG
IG
23
25
26
62
63
66

24060-0809
27063-0809
24801-1078
24600-0827
21003-1921
24801-2166
24802-2166
29502-4749
29516-7152
29502-5589
25003-2105
24600-2105
25003-2331
27063-0819
29502-5739
27223-5074
24620-2908
27063-0824
29507-5004
21158-2157
23550-4648
21158-2160
21158-7940
21158-2163
21158-2166
25003-4442
29502-4457
29500-4675
29502-4658
24807-2165
24802-3221
27023-9574
26001-6308
27063-6308
29507-5650
24807-2045
24060-1564
24060-1469
24060-2168
24060-2169
24060-2170
24801-1265
24802-1265
29519-1265
29500-4709
29502-4709
25003-2168
25058-2168
24600-2168
21702-2168
21158-2168
21527-2168

SHAFT

BORE

WIDTH

3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000

3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.751
3.813
3.818
3.825
3.875
3.875
3.875
3.875
3.875
3.875
3.876
3.876
3.876
3.876
3.876
3.876
3.876
3.876
3.876
3.876
3.880
3.881
3.937
3.937
3.937
3.937
3.937
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000

0.375
0.375
0.438
0.500
0.500
0.500
0.500
0.594
0.687
1.007
1.375
1.062
0.500
0.500
0.500
0.625
0.625
0.750
0.375
0.375
0.375
0.375
0.375
0.438
0.438
0.500
0.500
0.687
0.594
0.625
0.375
0.375
0.500
0.625
0.687
0.375
0.375
0.375
0.375
0.406
0.437
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625

MODEL NO. PART NO.

67
68
63
62
63
66
66
63F1
63R2
IGSPB
EQSPB
EQSPB
23
61
EQ
EQ
EQ
IG
23
26
62
63
66
62
63
63
66
63T2
26R1
EQ
23
63
62
EQ
63T2
21
23
25
61
23
23
25
23
25
26
61
61
61
62
113
EQ
EQ

21528-2168
21823-2168
21158-2169
21702-2170
21158-2170
21527-2120
21527-2170
23078-7542
23548-6543
29516-7070
24816-7023
24816-7010
25003-2173
24060-2173
24801-2173
24801-2172
24802-2172
29502-4328
25003-2171
24600-2171
21702-2171
21158-2171
21527-2171
21702-2172
21158-2172
21158-2173
21527-2173
23550-7153
24620-4946
24802-1216
25003-7941
21158-7941
21702-1937
24801-3642
23550-9654
25001-5023
25003-5023
25058-5023
24060-5023
25003-2565
25003-9915
25058-9915
25003-4557
25058-4557
24600-4557
24060-4557
24062-4557
24063-4557
21702-4557
21012-4557
24801-1220
24802-1220

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-50

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000

4.000
4.000
4.000
4.000
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.003
4.008
4.062
4.070
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.249
4.249
4.249
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250

0.625
0.750
0.750
0.750
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.437
0.438
0.500
0.500
0.500
0.500
0.594
0.625
0.687
0.687
0.687
0.687
0.687
0.625
0.375
0.500
0.375
0.437
0.438
0.500
0.500
0.500
0.500
0.500
0.563
0.625
0.719
0.750
0.906
0.906
0.500
0.500
0.625
0.375
0.500
0.500
0.500
0.500
0.625
0.625
0.625

MODEL NO. PART NO.

IG
EQ
IG
IG
23
26
62
63
66
67
68
62
63
23
25
62
63
63F1
EQ
63R1
63R2
63T2
63TB
66R2
EQ
23
23
23
26
26R1
23
53
26R1
62
EQ
53
EQ
53F1
IG
53R1
53R2
53
62
53
24
23
25
26
61
23
53
58

29519-1220
24801-2175
29500-2175
29502-2175
25003-2174
24600-2174
21702-2174
21158-2174
21527-2174
21528-2174
21823-2174
21702-2175
21158-2175
25003-2176
25058-2176
21702-2176
21158-2176
23078-7328
24802-3570
23547-7197
23548-7197
23550-7197
23549-7197
23702-7197
24802-2171
25003-9230
25003-4607
25003-6868
24600-2187
24620-2187
25003-2177
21086-2177
24620-2177
21702-2177
24801-2177
21086-2178
24802-2179
22987-5059
29500-4361
22537-7255
22627-7255
21086-2180
21702-2180
21086-2182
25005-8245
25003-4804
25058-4804
24600-2180
24060-4804
25003-9724
21086-9724
21003-9724

SHAFT

BORE

WIDTH

3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.006
3.008
3.010
3.015
3.016
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.062

4.250
4.331
4.375
4.375
4.375
4.375
4.375
4.375
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.617
4.625
4.724
4.750
4.750
4.875
4.910
4.922
4.922
4.999
4.999
5.000
5.000
5.875
5.875
4.006
4.008
4.010
4.015
4.016
3.810
4.000
4.003
4.003
4.062
4.062
4.125
4.125
4.125
4.125
4.249

0.625
0.500
0.375
0.500
0.500
0.500
0.562
0.750
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.719
0.750
0.906
0.937
0.969
0.625
0.500
0.500
0.500
0.500
0.500
0.750
0.500
0.625
0.500
0.500
0.500
0.750
0.750
0.750
0.625
0.750
0.625
0.625
0.750
1.062
0.500
0.375
0.375
0.375
0.625
0.437
0.500
0.500
0.562
0.500

MODEL NO. PART NO.

EQ
53
23
23
53
62
53
IG
23
26
53
62
53
25
53
EQ
53F1
IG
53T2
53T2
53T2
EQ
53
53
25
53
53
IG
53
53
53
62
26
IG
IG
IG
EQ
IG
EQ
EQ
IG
EQSPB
23
62
76
94
EQ
23
53
62
53
53

24801-9724
21086-6435
25003-9649
25003-2183
21086-2183
21702-2183
21086-2184
29500-4507
25003-2186
24600-2186
21086-2186
21702-2186
21086-4546
25058-2188
21086-2188
24802-2091
22987-7402
29502-5333
22897-6511
22897-5758
22897-7551
24802-2492
21086-2189
21086-7942
25058-2192
21086-2192
21086-2195
29502-4352
21086-7879
21086-6649
21086-2198
21702-2198
24600-2198
29502-5423
29502-5215
29507-5215
24802-2950
29502-5403
24802-3138
24802-3096
29502-5455
24816-7005
25003-2108
21702-8876
26193-8876
27223-9622
24802-2201
25003-1895
21086-2201
21702-2201
21086-2202
21086-2204

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-51

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.062
3.062
3.062
3.062
3.062
3.062
3.062
3.063
3.063
3.063
3.063
3.063
3.070
3.071
3.071
3.071
3.071
3.075
3.100
3.110
3.122
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125

4.331
4.500
4.625
4.724
4.875
4.875
4.999
3.813
4.063
4.063
4.125
4.125
3.937
3.937
4.071
4.331
4.571
4.325
4.100
4.331
4.000
3.625
3.750
3.750
3.875
3.875
3.875
3.875
3.875
3.938
4.000
4.000
4.000
4.000
4.003
4.008
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.130
4.188
4.249

0.500
0.500
0.500
0.500
0.500
0.625
0.500
1.007
0.500
0.750
0.500
0.500
0.437
0.625
0.500
0.750
0.500
0.625
0.750
0.750
0.625
0.109
0.312
0.500
0.375
0.375
0.375
0.500
0.750
0.750
0.375
0.500
0.625
0.625
0.750
0.375
0.375
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.750
0.906
0.906
0.625
0.500
0.438

Garlock

MODEL NO. PART NO.

53
53
53
53
53
53
53
IGSPB
23
IG
23
61
23
EQ
23
IG
23
EQ
IG
IG
EQ
71
61
61
21
23
26
61
IG
IG
61
23
EQ
IG
IG
23
3
23
23
26
53
58
61
62
53
EQ
IG
53R2
53T2
EQ
23
26R1

21086-7944
21086-2210
21086-2213
21086-7945
21086-2219
21086-2221
21086-2222
29516-7084
25003-2200
29502-4285
25003-2201
24060-2177
25003-4769
24802-3024
25003-7144
29502-5395
25003-4954
24802-2643
29502-5657
29502-5763
24802-2209
26001-6553
24060-1565
24060-1566
25001-7213
25003-7213
24600-7213
24060-1568
29502-4775
29502-4777
24060-1569
25003-5209
24801-2222
29507-2222
29502-5362
25003-3172
28003-3104
25003-6102
25003-2225
24600-2225
21086-2225
21003-2225
24060-2225
21702-2225
21086-2226
24802-2223
29502-4114
22627-6739
22897-6739
24802-1207
25003-2685
24620-2216

SHAFT

BORE

WIDTH

3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.140
3.142
3.149
3.149
3.149
3.149
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150

4.249
4.249
4.249
4.249
4.249
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.312
4.331
4.375
4.375
4.375
4.375
4.375
4.500
4.500
4.500
4.500
4.500
4.506
4.625
4.625
4.625
4.724
4.750
4.875
4.875
4.875
4.999
4.999
4.140
4.142
3.942
4.122
4.500
4.724
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937

0.500
0.562
0.625
0.719
0. 500
0.375
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.500
0.500
0.500
0.500
0.500
0.625
0.438
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.969
0.969
0.500
0.906
0.750
0.750
0.625
0.750
0.625
0.750
0.394
0.394
0.394
0.394
0.500
0.512
0.625
0.625
0.690
0.750

MODEL NO. PART NO.

23
53
53
53F1
53
23
23
26
23
26
EQ
IG
IG
IG
53
23
53
61
62
EQ
23
23
53
61
53
26R1
26
53
62
53
53
53
53F1
53T2
53
53R2
IG
IG
EQ
IG
EQ
IG
23
26R1
61
61
62
26
EQ
EQ
EQ
IG

25003-2228
21086-2229
21086-2230
22987-5162
21086-2228
25003-6862
25003-5025
24600-0914
25003-7682
24600-7682
24801-7682
29500-5066
29502-5066
29502-5723
21086-7947
25003-2231
21086-2231
24060-2231
21702-2231
24802-2224
25003-2358
25003-2234
21086-2234
24060-2234
21086-2236
24620-2217
24600-2237
21086-2237
21702-2237
21086-7948
21086-2240
21086-2243
22987-7181
22897-7181
21086-2246
22627-6968
29502-4888
29502-5055
24802-1739
29502-5313
24802-1813
29500-5487
25003-1033
24620-1033
24060-1033
24064-1033
21702-1938
24600-2238
24801-2240
24802-2240
24807-3674
29502-4798

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-52

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.156
3.158
3.158
3.167
3.185
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187

4.134
4.134
4.134
4.134
4.134
4.135
4.150
4.249
4.250
4.330
4.331
4.331
4.331
4.331
4.331
4.331
4.375
4.500
4.528
4.724
5.118
4.250
4.158
4.158
4.167
4.185
4.132
4.187
4.187
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.312
4.331
4.375
4.375
4.375
4.375
4.375
4.437
4.447
4.499
4.500
4.500
4.500
4.500
4.500

0.394
0.472
0.512
0.512
0.625
0.750
0.750
0.438
0.750
0.237
0.394
0.472
0.472
0.500
0.625
0.625
0.625
0.750
0.500
0.750
0.625
0.750
0.625
0.750
0.500
0.625
0.500
0.375
0.500
0.500
0.500
0.500
0.562
0.625
0.906
0.906
0.969
0.625
0.500
0.500
0.500
0.500
0.562
0.625
0.375
0.500
0.468
0.500
0.500
0.500
0.500
0.562

MODEL NO. PART NO.

61
92
26
26R1
EQ
IG
IG
23
IG
26
92
23
53
23
EQ
EQ
IG
IG
EQ
IG
EQ
IG
IG
IG
23
EQ
23
23
23
23
53
66
53
53
53R1
53R2
53T2
EQ
53
23
53
66
53
53
23
23
EQ
26
53
58
66
53

24060-2411
27063-0825
24600-2215
24620-2215
24801-2272
29502-4728
29502-5141
25003-4768
29502-4574
24600-2243
27063-0831
25003-7426
21086-7426
25003-1998
24801-3593
24802-3593
29519-5641
29502-5622
24801-2239
29500-5293
24801-5269
29502-4655
29507-5218
29502-5169
25003-9704
24802-3962
25003-5132
25003-7656
25003-4948
25003-2249
21086-2249
21527-2249
21086-2250
21086-2251
22537-6461
22627-6461
22897-5941
24802-3005
21086-7950
25003-2252
21086-2252
21527-2252
21086-2253
21086-2254
25003-0521
25003-2632
24801-1759
24600-3415
21086-2255
21003-2255
21527-2255
21086-2257

SHAFT

BORE

WIDTH

3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.187
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.188
3.189
3.201
3.206
3.218
3.225
3.228
3.228
3.228
3.238
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250

4.625
4.724
4.750
4.750
4.750
4.750
4.875
4.875
4.999
4.999
4.999
5.000
3.250
3.688
4.188
4.249
4.249
4.250
4.250
4.312
4.335
4.335
4.335
4.335
4.340
4.500
4.999
5.000
4.252
4.201
4.250
4.468
3.975
4.102
4.448
4.488
4.180
3.812
3.875
3.875
3.875
3.940
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.003

0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.969
0.500
0.625
0.625
0.750
0.625
0.625
0.375
0.750
0.750
1.000
1.124
1.298
1.312
0.305
0.500
0.438
0.625
0.750
0.625
0.500
0.500
0.375
0.375
0.625
0.500
0.500
0.109
0.312
0.312
0.375
0.250
0.250
0.375
0.437
0.438
0.500
0.625
0.625
0.690
0.750
0.625

MODEL NO. PART NO.

53
53
53
62
66
94
53
66
53
66
53T2
26
EQ
IG
IG
EQ
EQ
61
IG
IG
IGSPB
IGSPB
EQSPB
EQSPB
26
23
26R1
EQ
IG
EQ
23
23
26
23
EQ
23
23
71
61
61
61
76
26
67
61
26
61
EQ
EQ
EQ
IG
EQ

21086-2260
21086-8121
21086-2261
21702-2261
21527-2261
27223-2261
21086-2264
21527-2264
21086-2267
21527-2267
22897-8608
24600-2267
24802-2474
29507-5136
29502-4286
24801-5047
24802-5047
24060-1571
29502-4550
29502-5044
29516-5131
29516-7108
24816-7119
24816-7131
24600-2218
25003-2255
24620-2669
24802-3777
29502-5213
24802-3017
25003-8586
25003-9830
24600-2111
25003-1986
24802-3109
25003-1590
25003-2385
26001-8810
24060-1572
24061-1572
24062-2318
26193-6591
24600-2262
21528-5551
24060-1574
24600-2265
24060-1577
24801-1028
24802-1028
24807-2855
29502-4186
24802-1237

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-53

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250

4.030
4.125
4.125
4.125
4.225
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.249
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.263
4.312
4.313
4.331
4.335
4.335
4.375
4.375
4.375
4.375
4.375
4.375
4.500
4.500
4.500
4.500
4.500
4.500

0.750
0.437
0.500
0.562
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.562
0.625
0.719
0.750
0.906
0.906
0.937
0.375
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.969
0.969
0.437
0.500
0.625
0.500
1.124
1.312
0.500
0.500
0.500
0.500
0.625
0.906
0.375
0.438
0.500
0.500
0.500
0.500

Garlock

MODEL NO. PART NO.

IG
23
23
26
23
3
23
26
23
53
62
53
53
53F1
53F1
53R1
53R2
53F1
21
23
25
23
26
23
26
61
61
23
EQ
EQ
IG
IG
53R2
53T2
92
23
EQ
53
IGSPB
EQSPB
23
53
61
62
EQ
53TF
3
23
23
53
61
62

29502-5498
25003-6121
25003-5426
24600-2269
25003-1586
28003-3221
25003-8233
24600-8233
25003-2270
21086-2270
21702-2270
21086-2271
21086-2272
22987-6584
22987-7670
22537-6708
22627-6708
22987-5512
25001-6356
25003-6356
25058-6356
25003-6839
24600-6839
25003-7374
24600-7374
24060-7374
24063-7374
25003-2272
24801-2280
24802-2280
29500-4154
29502-4154
22627-7419
22897-7419
27063-6313
25003-1589
24802-3009
21086-7952
29516-7096
24816-7050
25003-2273
21086-2273
24060-2273
21702-2273
24802-2286
22994-7784
28003-3254
25003-5460
25003-2276
21086-2276
24060-2276
21702-2276

SHAFT

BORE

WIDTH

3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.250
3.280
3.307
3.307
3.307
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312
3.312

4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.543
4.625
4.625
4.724
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.812
4.875
4.875
4.999
4.999
4.999
5.250
4.280
4.331
4.331
4.331
4.125
4.125
4.125
4.213
4.250
4.250
4.312
4.312
4.331
4.375
4.375
4.375
4.375
4.375
4.375
4.500
4.500
4.500
4.500
4.625
4.724
4.725
4.750

0.562
0.625
0.718
0.750
0.750
0.843
0.906
0.500
0.500
0.500
0.500
0.437
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.500
0.625
0.500
0.625
0.906
0.750
0.375
0.551
0.625
0.625
0.438
0.500
0.690
0.750
0.437
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.468
0.500
0.625
0.719
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

53
53
53F1
IG
IG
53R2
53R2
23
23
53
53
23
23
53
61
62
53
53
113
53
53
53
EQ
53R2
IG
23
26
EQ
EQ
23
23
EQ
IG
23
23
23
23
53
23
26
53
62
53
EQ
23
53
53
53F1
53
53
53
53

21086-2277
21086-2278
22987-7313
29500-4425
29502-4425
22627-8700
22627-6528
25003-1778
25003-2279
21086-2279
21086-7953
25003-5160
25003-2282
21086-2282
24060-2282
21702-2282
21086-2283
21086-2284
21012-4558
21086-2285
21086-2287
21086-2288
24801-4461
22627-8441
29502-5816
25003-5682
24600-2562
24801-1988
24802-1988
25003-9539
25003-4879
24807-2846
29502-4826
25003-6128
25003-1628
25003-7591
25003-7841
21086-6903
25003-2297
24600-2297
21086-2297
21702-2297
21086-2299
24802-3966
25003-2301
21086-2300
21086-2302
22987-0238
21086-2303
21086-6628
21086-7906
21086-2306

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-54

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.312
3.312
3.312
3.312
3.312
3.312
3.313
3.313
3.313
3.313
3.313
3.313
3.313
3.313
3.313
3.320
3.335
3.335
3.343
3.343
3.345
3.345
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346
3.346

4.875
4.999
5.000
5.118
5.125
5.250
4.125
4.125
4.125
4.130
4.313
4.375
4.375
4.500
4.500
4.132
4.335
4.335
4.343
4.343
4.304
4.320
3.937
4.134
4.134
4.134
4.321
4.330
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.335
4.370
4.375
4.437
4.528
4.528
4.528
4.724
4.724
4.724
4.724
4.921
4.921
5.118

0.500
0.500
0.468
0.500
0.500
0.500
0.625
0.750
0.750
0.625
0.750
0.500
0.750
0.500
0.625
0.450
0.625
0.750
0.375
0.500
0.625
0.750
0.690
0.500
0.625
0.750
0.625
0.625
0.394
0.394
0.472
0.472
0.492
0.500
0.512
0.625
0.750
0.750
0.750
0.694
0.625
0.500
0.512
0.551
0.630
0.472
0.472
0.472
0.625
0.472
0.750
0.500

MODEL NO. PART NO.

53
53
26
53
53
53
EQ
IG
IG
EQ
IG
61
IG
23
EQ
61
EQ
IG
23
23
EQ
IG
EQ
26
EQ
IG
EQ
EQ
61
61
23
26
23
23
26
EQ
IG
IG
IG
IGSPB
EQ
23
92
EQ
EQ
23
53
26R1
EQ
53
IG
94

21086-2309
21086-2312
24600-2305
21086-7957
21086-2315
21086-0989
24802-2296
29500-4113
29502-4113
24802-1209
29502-4287
24060-2297
29502-4477
25003-2300
24802-2304
24060-2562
24802-3139
29500-5087
25003-8693
25003-6752
24802-3299
29502-4722
24807-5104
24600-2310
24802-2523
29502-5701
24802-3045
24802-3161
24060-1854
24064-1854
25003-2214
24600-2214
25003-2137
25003-5650
24600-5343
24801-3161
29500-4193
29502-4193
29502-5398
29516-7142
24802-1814
25003-5777
27063-0833
24801-3584
24801-2311
25003-7394
21086-7394
24620-7394
24801-5521
21086-7399
29500-4816
27223-6314

SHAFT

BORE

WIDTH

3.346
3.347
3.360
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375

5.118
4.500
5.000
4.000
4.125
4.125
4.250
4.250
4.250
4.335
4.335
4.355
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.437
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.625
4.625
4.625
4.625
4.625
4.625
4.626
4.724
4.750
4.750
4.750

0.625
0.625
0.625
0.312
0.690
0.750
0.375
0.500
0.625
0.770
0.990
0.375
0.375
0.438
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.687
0.750
0.906
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.719
0.750
0.750
0.375
0.500
0.500
0.500
0.625
0.750
0.563
0.500
0.500
0.500
0.750

MODEL NO. PART NO.

EQ
EQ
EQ
61
EQ
IG
26
23
EQ
IGSPB
IGSPB
26
23
23
23
26
53
61
62
EQ
53
EQ
EQ
53F1
IG
53T2
23
23
23
25
26
53
61
62
53
53
EQ
EQ
53F1
IG
IG
23
23
53
62
53
IG
26
53
23
53
53F1

24802-5110
24801-1911
24802-2527
24060-1580
24807-3767
29502-4385
24600-0839
25003-7642
24802-2316
29516-5124
29516-5272
24600-1375
25003-9056
25003-4688
25003-2321
24600-2321
21086-2321
24060-2321
21702-2321
24801-2321
21086-2323
24801-2322
24802-2322
22987-9209
29502-0774
22897-7357
25003-4797
25003-9614
25003-2324
25058-2324
24600-2324
21086-2324
24060-2324
21702-2324
21086-2325
21086-2326
24801-2326
24802-2326
22987-7289
29500-4379
29502-4379
25003-9954
25003-2327
21086-2327
21702-2327
21086-2329
29502-5058
24600-2318
21086-7868
25003-2330
21086-2330
22987-5332

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-55

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.375
3.380
3.385
3.386
3.386
3.400
3.402
3.408
3.420
3.420
3.420
3.425
3.430
3.432
3.435
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437

4.875
4.875
4.999
4.999
4.999
5.000
5.000
5.118
5.125
5.250
5.250
5.290
6.500
4.000
4.385
5.118
5.315
4.400
4.375
4.500
4.375
4.420
4.500
4.685
4.625
4.624
5.000
4.437
4.437
4.437
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.523
4.625
4.625
4.625
4.625
4.687
4.724
4.750
4.750
4.875
4.875
4.875
4.875

0.500
0.500
0.500
0.500
0.500
0.468
0.469
0.500
0.500
0.500
0.750
0.625
0.625
0.690
0.625
0.750
0.750
0.750
0.625
0.625
0.750
0.750
0.750
0.492
0.458
0.484
0.500
0.375
0.437
0.500
0.375
0.437
0.437
0.500
0.500
0.500
0.719
0.906
0.906
1.312
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.437
0.500
0.625
0.719

Garlock

MODEL NO. PART NO.

23
53
53
61
62
61
26
53
53
53
IG
EQ
54
EQ
EQ
IG
IG
IG
EQ
EQ
IG
IG
IG
26
23
113
26
23
23
23
23
23
61
26
53
62
53F1
53R1
53R2
EQSPB
23
53
61
62
23
53
53
53
23
53
53
53F1

25003-2333
21086-2333
21086-2336
24063-2336
21702-2336
24060-2368
24600-2319
21086-7959
21086-2339
21086-2342
29502-4354
24802-3646
21140-9733
24807-2973
24802-3101
29500-4748
29500-4750
29502-4325
24802-3334
24802-2332
29502-5133
29502-5755
29502-4603
24600-4224
25003-1087
21012-8800
24600-4710
25003-7075
25003-7438
25003-6355
25003-0996
25003-1440
24060-1440
24600-2345
21086-2345
21702-2345
22987-5319
22537-5183
22627-5183
24816-7147
25003-2348
21086-2348
24060-2348
21702-2348
25003-6357
21086-7960
21086-2351
21086-2353
25003-2943
21086-2354
21086-2356
22987-6159

SHAFT

BORE
BORE WIDTH
WIDTH
MODEL NO.
PART
PART
NO.NO.

3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.437
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.438
3.450
3.464
3.464
3.465
3.465
3.465
3.469
3.469
3.469
3.475
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500

4.921
4.937
4.999
5.000
5.000
5.118
5.125
5.125
5.125
5.250
5.250
5.807
4.125
4.313
4.333
4.338
4.438
4.438
4.438
4.458
4.460
4.460
4.500
4.500
4.500
4.523
4.562
4.600
4.625
4.625
4.625
4.626
4.875
5.000
4.500
4.331
4.500
4.331
4.331
4.729
4.500
4.500
4.500
4.500
3.876
4.003
4.062
4.125
4.125
4.125
4.250
4.375

0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.500
0.625
0.828
0.437
0.625
1.102
1.375
0.625
0.625
0.750
1.312
0.500
1.124
0.500
0.500
0.750
1.124
0.375
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.625
0.500
0.750
0.472
0.591
0.500
0.500
0.500
0.625
0.375
0.187
0.250
0.109
0.312
0.500
0.625
0.500
0.375

53
23
53
23
25
53
53
53
EQ
53
53
IGSPB
61
EQ
IGSPB
EQSPB
EQ
EQ
IG
EQSPB
23
IGSPB
23
61
IG
IGSPB
23
23
26
EQ
EQ
EQ
26
IG
EQ
23
IG
92
26R1
23
23
62
23
23
71
71
71
61
61
IG
61
23

21086-5535
25003-9944
21086-2357
25003-4710
25058-4710
21086-7962
21086-2360
21086-2362
24802-3753
21086-2363
21086-2365
29516-7116
24060-1583
24802-3344
29516-7086
24816-7033
24801-2577
24802-2577
29502-4288
24816-7025
25003-2965
29516-7112
25003-2345
24060-2345
29502-4650
29516-7113
25003-0823
25003-1906
24600-2348
24801-2348
24801-2335
24802-2335
24600-2356
29502-5592
24802-2944
25003-1772
29502-5090
27063-0834
24620-0846
25003-1768
25003-9015
21702-9015
25003-7468
25003-4686
26001-7095
26001-7096
26001-9668
24060-1591
24060-1595
29507-4893
24060-1599
25003-2364

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-56

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500

4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.376
4.381
4.390
4.437
4.437
4.458
4.475
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.523
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.721

0.375
0.500
0.500
0.500
0.625
0.625
0.750
0.750
0.375
0.750
0.336
0.312
0.500
1.312
0.500
0.375
0.375
0.437
0.468
0.469
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.625
0.625
0.719
0.750
0.750
0.812
0.906
0.906
0.906
1.124
0.375
0.500
0.500
0.500
0.562
0.625
0.625
0.375

MODEL NO. PART NO.

26
23
25
61
EQ
EQ
IG
IG
3
IG
21
26
23
EQSPB
23
3
23
26
23
66
23
25
26
53
61
61
61
62
66
EQ
53
62
26
53
EQ
EQ
53F1
IG
IG
53R1
53R1
53R2
53T2
IGSPB
23
53
62
66
53
53
EQ
26R1

24600-2364
25003-6285
25058-6285
24060-6285
24801-2378
24802-2378
29500-4214
29502-4214
28003-3460
29500-5700
25001-6559
24600-3981
25003-1296
24816-7036
25003-1444
28003-3478
25003-6358
24600-2377
25003-4640
21527-4640
25003-2366
25058-2366
24600-2366
21086-2366
24060-2366
24062-2366
24064-2366
21702-2366
21527-2366
24801-2366
21086-2367
21702-2367
24600-2368
21086-2368
24801-2368
24802-2368
22987-7115
29500-4156
29502-4156
22537-5300
22537-6534
22627-6534
22897-6534
29516-7097
25003-5122
21086-2369
21702-2369
21527-2369
21086-2370
21086-2371
24802-1882
24620-2862

SHAFT

BORE

WIDTH

3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.526
3.535
3.535

4.721
4.724
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.812
4.875
4.875
4.875
4.875
4.875
4.875
4.921
4.999
4.999
4.999
4.999
4.999
4.999
5.000
5.000
5.118
5.125
5.125
5.250
5.250
5.250
5.250
5.250
5.375
5.375
5.500
5.500
5.500
5.807
6.375
4.526
4.500
4.535

0.750
0.500
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.843
0.906
0.906
0.969
0.500
0.500
0.500
0.625
0.625
0.969
0.969
0.562
0.375
0.500
0.500
0.625
0.719
0.906
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.750
0.500
0.500
0.500
0.500
0.625
0.828
0.375
0.625
0.750
0.750

MODEL NO. PART NO.

IG
53
23
24
23
25
53
61
62
66
53
53
EQ
EQ
53R1
53R1
53TF
53TB
23
53
66
EQ
EQ
53R1
53T2
53
23
53
66
53
53F1
53R2
23
53
53
53
66
53
58
66
53
IG
53
66
53
66
53
IGSPB
26
EQ
IG
IG

29502-5933
21086-7963
25003-7578
25005-7578
25003-2372
25058-2372
21086-2372
24060-2372
21702-2372
21527-2372
21086-2373
21086-2374
24801-2374
24802-2374
22537-7269
22537-5008
22994-5008
22807-7230
25003-1034
21086-2375
21527-2375
24082-5461
24802-5461
22537-7611
22897-7611
21086-8877
25003-4745
21086-2378
21527-2378
21086-2380
22987-7332
22627-7324
25003-7253
21086-7253
21086-7965
21086-2381
21527-2381
21086-2384
21003-2384
21527-2384
21086-2386
29502-5381
21086-2387
21527-2387
21086-2390
21527-2390
21086-2392
29516-7114
24600-1665
24802-2261
29502-4491
29502-5749

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-57

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.537
3.540
3.542
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.543
3.544
3.550
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562

4.500
4.540
4.542
4.330
4.330
4.331
4.331
4.331
4.331
4.500
4.527
4.527
4.527
4.528
4.528
4.528
4.543
4.543
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.960
4.565
4.550
4.438
4.500
4.562
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.724
4.750
4.750
4.750
4.750
4.750
4.751
4.812
4.812

0.500
0.750
0.375
0.472
0.511
0.394
0.394
0.394
0.625
0.625
0.491
0.500
0.512
0.472
0.472
0.512
0.625
0.750
0.472
0.472
0.472
0.472
0.500
0.500
0.511
0.625
0.625
0.750
0.750
0.750
0.625
0.750
0.438
0.625
0.375
0.375
0.500
0.500
0.500
0.625
0.625
0.906
0.906
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.500
0.500

Garlock

MODEL NO. PART NO.

26
IG
23
26R1
26
61
61
61
EQ
EQ
23
23
26R1
23
61
26
IG
IG
23
53
61
92
23
53
26
EQ
EQ
IG
IG
IG
EQ
IG
23
EQ
23
23
23
53
62
EQ
EQ
53R1
53R2
53
23
53
62
53
53
EQ
23
24

24600-1968
29502-5748
25003-5100
24620-2437
24600-5002
24060-1856
24063-1856
24064-1856
24802-3265
24802-1815
25003-8803
25003-4846
24620-5344
25003-9963
24060-9963
24600-5344
29507-2405
29500-5479
25003-7839
21086-7839
24060-7839
27063-7839
25003-8429
21086-8429
24600-2457
24801-2902
24802-2902
29500-4758
29502-4758
29500-4844
24802-5382
29502-4715
25003-2406
24802-3240
25003-1988
25003-6923
25003-2393
21086-2393
21702-2393
24802-5449
24802-5449
22537-6545
22627-6545
21086-8126
25003-2396
21086-2396
21702-2396
21086-2397
21086-2398
24802-1174
25003-5933
25005-5933

SHAFT

BORE

WIDTH

3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.562
3.563
3.563
3.563
3.563
3.563
3.563
3.580
3.600
3.605
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625

4.875
4.999
4.999
5.118
5.125
5.250
5.250
5.250
5.500
7.250
4.500
4.500
4.500
4.500
4.563
4.563
4.916
4.600
4.625
4.250
4.333
4.375
4.499
4.500
4.609
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.626
4.724
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750

0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.906
0.500
0.562
0.437
0.469
0.500
0.750
0.500
0.750
0.750
0.750
0.750
0.312
1.102
0.625
0.468
0.500
0.492
0.375
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.719
0.719
0.750
0.906
0.375
0.500
0.375
0.500
0.500
0.500
0.562
0.562
0.625
0.906
0.906

MODEL NO. PART NO.

53
53
62
53
53
53
62
53R1
53
54
61
23
61
IG
23
IG
IG
IG
IG
61
IGSPB
EQ
EQ
23
23
23
23
23
26
53
58
61
62
53
53
EQ
EQ
53F1
53F1
IG
53R2
3
53
23
23
53
61
53
62
26
53R1
53R2

21086-2399
21086-2402
21702-2402
21086-7967
21086-2405
21086-2408
21702-2408
22537-7905
21086-2414
21140-6008
24060-1601
25003-1029
24060-1604
29502-5165
25003-5051
29502-4289
29502-5314
29502-5658
29502-5210
24060-1605
29516-7071
24802-1080
24801-1751
25003-5313
25003-1515
25003-6359
25003-1022
25003-2417
24600-2417
21086-2417
21003-2417
24060-2417
21702-2417
21086-2418
21086-2419
24801-2419
24802-2419
22987-6590
22987-6950
29502-4157
22627-6901
28003-3568
21086-7968
25003-0692
25003-2420
21086-2420
24060-2420
21086-2421
21702-2421
24600-2412
22537-8396
22627-8396

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-58

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.625
3.634
3.681
3.681
3.685
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.687
3.688
3.688
3.688
3.688
3.688

4.751
4.875
4.875
4.875
4.875
4.875
4.875
4.999
4.999
4.999
5.000
5.000
5.000
5.118
5.125
5.125
5.250
5.250
5.250
5.375
5.500
5.500
4.625
4.681
5.000
4.685
4.560
4.687
4.687
4.687
4.750
4.750
4.750
4.750
4.750
4.875
4.875
4.937
4.999
4.999
5.118
5.125
5.125
5.250
5.250
5.375
5.500
4.688
4.688
4.750
4.750
4.999

0.500
0.375
0.500
0.500
0.562
0.625
0.844
0.500
0.500
0.625
0.500
0.562
0.719
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.969
0.750
0.500
0.500
0.750
0.750
0.375
0.500
0.500
0.375
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.781
0.500
0.500
0.625
0.750
0.438
0.750
0.500

MODEL NO. PART NO.

26R1
23
23
53
53
53
53R1
23
53
53
23
53
53F1
53
23
53
26
53
26R1
53
53
53T2
IG
23
23
IG
IG
23
23
25
23
23
26
53
53
23
53
23
23
53
53
23
53
53
53F1
53
53
EQ
IG
26
IG
26

24620-2420
25003-4864
25003-2423
21086-2423
21086-2424
21086-2425
22537-9401
25003-2426
21086-2426
21086-2428
25003-2415
21086-5582
22987-5646
21086-7970
25003-2429
21086-2429
24600-2432
21086-2432
24620-2432
21086-2435
21086-2438
22897-6505
29502-5296
25003-1901
25003-2095
29502-5751
29502-5258
25003-8639
25003-9104
25058-9104
25003-5749
25003-2441
24600-2441
21086-2441
21086-2442
25003-2444
21086-2444
25003-8159
25003-2447
21086-2447
21086-7972
25003-2450
21086-2450
21086-2453
22987-8531
21086-2456
21086-2459
24802-2744
29502-4290
24600-3037
29500-4562
24600-2447

SHAFT

BORE

WIDTH

3.688
3.712
3.719
3.720
3.725
3.731
3.735
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.740
3.741
3.741
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750

5.000
4.712
5.094
4.720
4.725
4.731
4.735
4.528
4.724
4.724
4.724
4.724
4.724
4.724
4.725
4.740
4.740
4.740
4.750
4.921
4.921
4.921
4.990
4.990
5.118
5.118
5.512
5.240
5.240
4.312
4.375
4.375
4.375
4.375
4.500
4.500
4.625
4.732
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750

0.500
0.500
0.500
0.500
0.750
0.750
0.625
0.472
0.394
0.472
0.472
0.511
0.625
0.625
0.472
0.375
0.500
0.750
0.625
0.472
0.472
0.750
0.375
0.500
0.472
0.625
0.750
0.500
0.500
0.109
0.312
0.312
0.500
0.690
0.375
0.625
0.375
0.405
0.250
0.375
0.375
0.438
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

23
23
23
23
IG
IG
EQ
92
61
23
92
26R1
EQ
EQ
26R1
23
23
IG
EQ
23
92
IG
24
23
92
EQ
IG
23
24
71
61
71
61
EQ
61
EQ
23
23
76
23
25
23
23
25
26
53
58
61
61
62
66
EQ

25003-5097
25003-9547
25003-4742
25003-1041
29502-5730
29502-5057
24802-3072
27063-0850
24060-1859
25003-9190
27063-9190
24620-6061
24801-3021
24802-3021
24620-9190
25003-1110
25003-6896
29500-4506
24802-1816
25003-1010
27063-1010
29500-4979
25005-5741
25003-7464
27063-0851
24802-2972
29500-4751
25003-6250
25005-6250
26001-9981
24060-7097
26001-7097
24060-1606
24807-4523
24063-2235
24802-2210
25003-9174
25003-1713
26193-7192
25003-7389
25058-7389
25003-4455
25003-2462
25058-2462
24600-2462
21086-2462
21003-2462
24060-2462
24063-2462
21702-2462
21527-2462
24801-2462

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-59

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.750
3.777
3.786
3.790
3.812
3.812
3.812

4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.812
4.875
4.875
4.875
4.875
4.875
4.885
4.999
4.999
4.999
4.999
4.999
4.999
4.999
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.062
5.118
5.125
5.125
5.125
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.375
5.500
5.500
5.500
4.732
4.786
4.790
4.773
4.812
4.812

0.562
0.625
0.625
0.625
0.690
0.750
0.750
0.906
0.500
0.375
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.906
0.375
0.437
0.438
0.500
0.500
0.500
0.625
0.750
0.375
0.500
0.500
0.500
0.500
0.438
0.500
0.500
0.500
0.500
0.625
0.625
0.500
0.500
0.500
0.750
0.625
0.625
0.750
1.375
0.500
0.750

Garlock

MODEL NO. PART NO.

53
53
113
EQ
EQ
IG
IG
53R2
23
23
23
53
66
53
62
23
53
26R1
66
53
53
53R2
23
23
26
23
26
61
EQ
IG
23
53
23
53
66
23
23
53
62
66
53
EQ
66
53
66
IG
EQ
EQ
IG
EQSPB
23
IG

21086-2463
21086-2464
21012-2464
24802-2464
24807-3781
29500-4158
29502-4158
22627-7440
25003-6960
25003-6619
25003-2465
21086-2465
21527-2465
21086-2466
21702-8168
25003-2468
21086-2468
24620-4654
21527-2468
21086-2469
21086-2470
22627-6806
25003-9089
25003-0802
24600-2477
25003-5079
24600-2478
24060-5079
24802-2483
29502-5364
25003-2016
21086-7974
25003-2471
21086-2471
21527-2471
25003-3256
25003-2474
21086-2474
21702-2474
21527-2474
21086-2476
24802-1095
21527-7249
21086-2480
21527-2480
29502-5757
24802-4696
24802-3039
29502-5721
24816-7044
25003-6464
29502-4291

SHAFT

BORE

WIDTH

3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.812
3.813
3.815
3.820
3.825
3.847
3.850
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875
3.875

4.875
4.875
4.875
4.999
4.999
5.118
5.125
5.250
5.312
5.375
5.375
5.500
5.500
4.773
4.815
5.042
4.875
5.063
4.875
4.500
4.500
4.625
4.750
4.750
4.750
4.843
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.876
4.999
4.999
4.999
5.000
5.000
5.000
5.000
5.000
5.062
5.085
5.118
5.125
5.125
5.250
5.250
5.250

0.500
0.500
0.750
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
1.062
0.625
0.375
0.750
0.375
0.750
0.312
0.500
0.500
0.375
0.375
0.500
0.484
0.437
0.437
0.500
0.500
0.500
0.625
0.719
0.750
0.906
0.375
0.500
0.500
0.625
0.375
0.468
0.500
0.625
0.625
0.375
1.375
0.500
0.500
0.500
0.500
0.500
0.562

MODEL NO. PART NO.

23
53
IG
23
53
53
53
53
23
23
53
26
53
IGSPB
EQ
23
IG
23
IG
61
61
61
23
26
61
23
23
26
23
53
62
EQ
53F1
IG
53R2
3
53
62
53
23
26
23
EQ
EQ
23
EQSPB
53
23
53
23
53
53

25003-2483
21086-2483
29502-5476
25003-2486
21086-2486
21086-7976
21086-2489
21086-2492
25003-9817
25003-2495
21086-2495
24600-2498
21086-2498
29516-7087
24802-3185
25003-3096
29502-4602
25003-0422
29502-4622
24060-1607
24060-1611
24060-1613
25003-7746
24600-5637
24060-1614
25003-5959
25003-8592
24600-8592
25003-2501
21086-2501
21702-2501
24802-2503
22987-5201
29502-4159
22627-5645
28003-3721
21086-2504
21702-2504
21086-2506
25003-9298
24600-2514
25003-4772
24801-2506
24802-2506
25003-4426
24816-7056
21086-7978
25003-2507
21086-2507
25003-2510
21086-2510
21086-2511

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-60

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.875
3.875
3.875
3.875
3.875
3.875
3.876
3.897
3.900
3.900
3.906
3.907
3.916
3.922
3.925
3.933
3.934
3.934
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937

5.375
5.375
5.375
5.500
5.500
5.500
4.313
4.876
4.900
5.200
5.000
5.118
5.234
4.922
4.925
4.933
4.934
5.120
4.562
4.687
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.734
4.812
4.875
4.875
4.883
4.900
4.906
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.922
4.937
4.937
4.937
4.937
4.937
4.937
4.937

0.500
0.500
0.500
0.500
0.500
0.625
0.690
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.750
0.500
0.625
0.625
0.690
0.690
0.394
0.433
0.472
0.472
0.500
0.512
0.625
0.511
0.375
0.500
0.625
0.625
0.625
0.484
0.256
0.433
0.472
0.492
0.500
0.512
0.625
0.625
0.750
0.750
0.512
0.375
0.375
0.500
0.500
0.500
0.690
0.750

MODEL NO. PART NO.

23
26
53
53
94
EQ
EQ
23
EQ
23
23
23
23
23
IG
23
EQ
EQ
EQ
EQ
92
58
61
61
23
26R1
EQ
26
23
23
EQ
EQ
EQ
23
26
23
92
23
23
26R1
EQ
EQ
IG
IG
26
23
26R1
23
26
53
EQ
IG

25003-2513
24600-2513
21086-2513
21086-2516
27223-2516
24802-1961
24807-3752
25003-2259
24802-3104
25003-1317
25003-1610
25003-0503
25003-2294
25003-9487
29502-5648
25003-4747
24802-3983
24802-4697
24807-3271
24807-3557
27063-0852
21003-4263
24063-2242
24064-2242
25003-9284
24620-9030
24802-1347
24600-4634
25003-7036
25003-5872
24801-3830
24802-2942
24802-2891
25003-8483
24600-1907
25003-5363
27063-0860
25003-1875
25003-3248
24620-5345
24801-2230
24802-2230
29500-4649
29502-4649
24600-5345
25003-6709
24620-6709
25003-4817
24600-4817
21086-4817
24807-3000
29500-4292

SHAFT

BORE

WIDTH

3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.938
3.938

4.955
4.960
4.990
4.999
4.999
4.999
4.999
4.999
4.999
4.999
4.999
5.000
5.000
5.000
5.062
5.062
5.062
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.125
5.125
5.125
5.125
5.187
5.187
5.250
5.250
5.250
5.250
5.250
5.256
5.312
5.328
5.375
5.375
5.437
5.500
5.500
5.625
5.905
6.201
6.375
6.693
4.724
4.875

1.252
0.750
0.750
0.500
0.500
0.500
0.562
0.625
0.750
0.750
0.906
0.469
0.500
0.625
0.375
0.375
0.500
0.472
0.472
0.472
0.500
0.500
0.512
0.625
0.625
0.750
0.500
0.500
0.500
0.625
0.375
0.500
0.500
0.500
0.500
0.625
0.625
0.468
0.500
1.375
0.500
0.906
0.500
0.500
0.500
0.500
0.500
0.988
0.750
0.394
0.750
0.500

MODEL NO. PART NO.

EQSPB
IG
IG
23
53
62
53
53
IG
IG
53R1
23
23
EQ
23
26
23
23
53
92
23
53
61
EQ
EQ
IG
23
53
62
53
23
23
23
26
53
53
EQ
23
23
EQSPB
53
53R1
23
53
62
53
94
IGSPB
IG
26
IG
61

24816-7048
29502-5072
29502-5397
25003-2519
21086-2519
21702-2519
21086-2520
21086-2521
29500-4641
29502-4641
22537-5049
25003-6129
25003-5913
24801-2962
25003-9646
24600-9646
25003-6111
25003-1979
21086-7842
27063-7842
25003-7979
21086-7979
24060-7979
24801-1346
24802-1346
29502-4859
25003-2522
21086-2522
21702-2522
21086-2524
25003-5444
25003-4776
25003-2525
24600-2525
21086-2525
21086-2527
24801-3474
25003-1145
25003-6205
24816-7031
21086-2528
22537-8570
25003-7416
21086-2531
21702-2531
21086-2534
27223-6323
29516-7117
29500-4640
24600-5924
29502-4980
24060-5872

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-61

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.938
3.948
3.950
3.976
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000

4.875
4.881
4.906
4.906
4.906
4.921
4.937
4.938
4.938
4.938
4.950
4.957
4.960
4.986
4.999
5.000
5.000
5.040
5.085
5.085
5.118
5.125
5.188
5.250
5.250
5.251
5.315
5.501
5.643
5.807
6.250
4.948
4.950
5.551
4.500
4.500
4.500
4.562
4.625
4.625
4.750
4.750
4.750
4.875
4.875
4.875
4.875
4.875
4.897
4.937
4.937
4.999

0.500
0.625
0.484
0.484
0.500
0.394
0.625
0.438
0.625
0.750
0.500
1.375
1.062
1.375
0.438
0.400
0.500
0.400
1.050
1.375
0.375
0.468
0.750
0.500
0.750
0.625
0.625
0.625
1.125
0.828
0.500
0.625
0.500
0.630
0.250
0.250
0.625
0.109
0.312
0.312
0.375
0.500
0.500
0.500
0.500
0.563
0.625
0.750
0.500
0.375
0.500
0.375

Garlock

MODEL NO. PART NO.

EQ
26R1
23
23
23
23
EQ
23
EQ
IG
23
EQSPB
IGSPB
EQSPB
23
23
26
23
IGSPB
EQSPB
23
23
IG
61
IG
EQ
EQ
EQ
EQSPB
IGSPB
61
EQ
23
26
71
92
IG
71
61
76
61
61
61
23
26R1
26
26
IG
23
23
23
3

24801-2533
24620-2494
25003-1746
25003-1766
25003-8790
25003-0811
24802-1144
25003-2523
24801-1144
29502-4292
25003-2622
24816-7026
29516-7098
24816-7018
25003-2493
25003-1448
24600-5913
25003-1000
29516-7133
24816-7057
25003-3229
25003-2548
29500-4845
24060-2525
29502-5128
24802-3474
24802-4091
24802-2046
24816-7047
29516-5113
24060-1640
24802-3018
25003-1239
24600-4225
26001-9016
27063-9016
29507-5137
26001-6325
24060-9879
26193-9879
24060-1643
24060-1488
24061-1488
25003-2554
24620-2554
24600-2590
24600-2591
29502-5203
25003-4738
25003-9851
25003-2557
28003-4010

SHAFT

BORE

WIDTH

4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000

4.999
4.999
4.999
4.999
4.999
4.999
4.999
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.031
5.031
5.118
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.131
5.248
5.250
5.250
5.250
5.250
5.250
5.250

0.500
0.500
0.500
0.500
0.625
0.718
0.906
0.375
0.375
0.375
0.375
0.437
0.437
0.468
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.375
0.500
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.563
0.625
0.625
0.625
0.906
0.969
0.375
0.500
0.312
0.375
0.438
0.468
0.500
0.500

MODEL NO. PART NO.

23
53
62
66
53
53F1
53R2
21
23
25
26
23
26
26
21
23
25
26
61
61
62
88
88NS
EQ
26
EQ
EQ
IG
IG
23
23
53
23
23
53
61
62
66
53
53
111
EQ
53R2
53TB
23
EQ
26
24
EQ
26
23
25

25003-2537
21086-2537
21702-2537
21527-2537
21086-2539
22987-6990
22627-6799
25001-6360
25003-6360
25058-6360
24600-0978
25003-9662
24600-9662
24600-2592
25001-4651
25003-4651
25058-4651
24600-4651
24060-4651
24062-4651
21702-4651
26088-4651
26188-4651
24801-4651
24600-2593
24801-2593
24802-2593
29500-4160
29502-4160
25003-9741
25003-9824
21086-7980
25003-8957
25003-2540
21086-2540
24060-2540
21702-2540
21527-2540
21086-2541
21086-2542
21011-2542
24802-2542
22627-7559
22807-8731
25003-9648
24801-0930
24600-4645
25005-9926
24801-1056
24600-2595
25003-2543
25058-2543

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-62

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.000
4.003
4.016
4.062
4.062
4.062

5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.265
5.375
5.375
5.375
5.375
5.375
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.625
5.625
5.750
5.750
5.750
5.750
5.750
5.750
5.875
6.000
6.000
6.000
6.125
6.125
6.125
6.250
6.250
6.250
6.250
6.250
8.000
4.500
5.438
5.000
5.125
5.125

0.500
0.500
0.500
0.500
0.563
0.625
0.625
0.750
0.906
0.500
0.500
0.500
0.500
0.500
0.750
0.438
0.500
0.500
0.500
0.500
0.500
0.500
0.563
0.625
0.719
0.750
0.375
0.500
0.500
0.500
0.500
0.500
0.563
0.781
0.500
0.500
0.500
0.906
0.500
0.500
0.625
0.500
0.500
0.563
0.563
0.625
0.625
0.690
0.500
0.375
0.469
0.500

MODEL NO. PART NO.

53
61
62
66
53
53
111
IG
53R1
23
23
26
53
66
IG
23
23
24
25
53
66
EQ
53
53
53F1
25
23
53
26
53
62
66
53
53F1
53
53
66
53R2
53
66
53
53
66
53
111
53
54
EQ
23
23
23
23

21086-2543
24060-2543
21702-2543
21527-2543
21086-2544
21086-2545
21011-2545
29502-5480
22537-6434
25003-6409
25003-2546
24600-2546
21086-2546
21527-2546
29502-4209
25003-2553
25003-2549
25005-2549
25058-2549
21086-2549
21527-2549
24801-2549
21086-2550
21086-2551
22987-7448
25058-9665
25003-2985
21086-2552
24600-2555
21086-2555
21702-2555
21527-2555
21086-2556
22987-5492
21086-2558
21086-2561
21527-2561
22627-8771
21086-2564
21527-2564
21086-2566
21086-2567
21527-2567
21086-2568
21011-2568
21086-2569
21140-6010
24807-4471
25003-2533
25003-1928
25003-6298
25003-2570

SHAFT

BORE

WIDTH

4.062
4.062
4.062
4.062
4.062
4.063
4.063
4.063
4.063
4.063
4.063
4.063
4.063
4.100
4.120
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125

5.125
5.250
5.256
5.500
6.000
5.062
5.063
5.125
5.250
5.312
5.500
5.500
5.875
5.100
5.000
4.686
4.750
5.000
5.025
5.085
5.085
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.131
5.187
5.230
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.375
5.375
5.375

0.750
0.500
0.469
0.500
0.906
0.500
0.750
0.500
0.500
0.500
0.500
0.563
0.500
0.750
0.750
0.109
0.690
0.500
1.375
0.770
1.051
0.375
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.719
0.750
0.906
0.625
0.500
0.963
0.375
0.407
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.750
0.750
0.906
0.500
0.500
0.500

MODEL NO. PART NO.

IG
23
23
23
53R2
23
IG
53
53
23
53
26
53
IG
IG
71
EQ
23
EQSPB
IGSPB
IGSPB
23
23
26
53
61
62
EQ
EQ
IG
53F1
IG
53R2
EQ
23
IGSPB
23
23
23
26
53
61
62
53
53
EQ
IG
IG
53R2
23
53
61

29502-4572
25003-2573
25003-0202
25003-2579
22627-7651
25003-7123
29502-4293
21086-2570
21086-2573
25003-6616
21086-2579
24600-2601
21086-2588
29502-5719
29502-5513
26001-7992
24807-2287
25003-6870
24816-7024
29516-5125
29516-5271
25003-6625
25003-2600
24600-2600
21086-2600
24060-2600
21702-2600
24801-2604
24802-2604
29507-2604
22987-8683
29502-4161
22627-9018
24801-2438
25003-6578
29516-7137
25003-9060
25003-9877
25003-2603
24600-2603
21086-2603
24060-2603
21702-2603
21086-2604
21086-2605
24802-2605
29500-4116
29502-4116
22627-6082
25003-2606
21086-2606
24060-2606

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-63

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.125
4.130
4.133
4.133
4.133
4.133
4.133
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.134
4.156
4.166
4.166
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187

5.375
5.375
5.375
5.375
5.375
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.625
5.625
5.625
5.625
5.750
5.875
6.000
6.000
6.250
4.505
5.110
5.118
5.314
5.511
5.511
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.134
5.315
5.315
5.315
5.512
5.512
5.512
5.406
5.500
5.506
4.999
5.187
5.230
5.243
5.250
5.250
5.250
5.250

0.625
0.625
0.625
0.750
0.906
0.438
0.500
0.500
0.500
0.563
0.969
0.969
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.625
0.472
0.472
0.551
0.625
0.625
0.472
0.500
0.512
0.625
0.625
0.750
0.750
0.625
0.500
0.550
0.551
0.472
0.472
0.750
0.500
0.750
0.500
0.468
0.375
1.375
1.375
0.500
0.500
0.500
0.750

Garlock

MODEL NO. PART NO.

23
24
53
IG
53R2
23
23
53
EQ
53
53R2
53T2
23
24
26
53
EQ
53
23
53
53
IG
23
23
23
EQ
EQ
92
23
23
EQ
EQ
IG
IG
EQ
23
26
26R1
23
92
IG
23
IG
23
61
23
EQSPB
EQSPB
23
53
62
IG

25003-2608
25005-2608
21086-2608
29502-4884
22627-9320
25003-6142
25003-2609
21086-2609
24801-0932
21086-2610
22627-4752
22897-4752
25003-2612
25005-2612
24600-2612
21086-2612
24802-2616
21086-2618
25003-2621
21086-2621
21086-2627
29507-5006
25003-4847
25003-8768
25003-5353
24801-5309
24802-5309
27063-8768
25003-2000
25003-6052
24801-2625
24802-2625
29500-4981
29502-4981
24802-2629
25003-5763
24600-5353
24620-1034
25003-0866
27063-0866
29502-4982
25003-9950
29500-4497
25003-4880
24060-2074
25003-4758
24816-7027
24816-7006
25003-2630
21086-2630
21702-2630
29502-4366

SHAFT

BORE

WIDTH

4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.187
4.188
4.188
4.188
4.188
4.188
4.188
4.188
4.188
4.188
4.188
4.188
4.188
4.213
4.217
4.230
4.245
4.245
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250

5.250
5.312
5.375
5.375
5.375
5.375
5.437
5.500
5.500
5.500
5.500
5.625
5.687
5.750
5.750
5.875
5.875
6.000
6.000
6.125
6.250
4.999
5.004
5.188
5.188
5.188
5.230
5.250
5.250
5.250
5.250
5.256
5.500
5.827
5.280
5.230
5.245
5.626
4.812
4.875
5.000
5.000
5.062
5.125
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250

0.969
0.500
0.470
0.500
0.500
0.625
0.500
0.500
0.500
0.562
0.625
0.500
0.375
0.500
0.500
0.500
0.625
0.500
0.906
0.500
0.500
0.438
0.625
0.500
0.625
0.750
1.062
0.468
0.469
0.625
0.750
0.625
0.500
0.750
0.500
0.625
0.625
0.625
0.109
0.500
0.437
0.438
0.375
0.500
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

53T2
23
23
23
53
53
23
53
62
53
EQ
53
23
23
53
53
EQ
53
53R2
53
53
61
EQ
23
EQ
IG
IGSPB
26
23
26
IG
EQ
23
IG
23
EQ
EQ
EQ
71
61
61
26
23
61
23
23
26
23
25
26
53
61

22897-8811
25003-2355
25003-7129
25003-2633
21086-2633
21086-2635
25003-6783
21086-2636
21702-2636
21086-2637
24802-2106
21086-2639
25003-5190
25003-2642
21086-2642
21086-2645
24802-1960
21086-2648
22627-6871
21086-2651
21086-2654
24063-2403
24802-1768
25003-2641
24802-2747
29502-4295
29516-7088
24600-2644
25003-2644
24600-2646
29500-4366
24802-2623
25003-2636
29500-4835
25003-5635
24802-3210
24802-3224
24802-3282
26001-7546
24060-1646
24060-1649
24600-2653
25003-2578
24060-1652
25003-7590
25003-9960
24600-9960
25003-2657
25058-2657
24600-2657
21086-2657
24060-2657

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-64

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250

5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.251
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.376
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.625
5.625
5.625
5.687
5.687
5.702
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.875
6.000
6.125
6.250

0.500
0.500
0.562
0.625
0.625
0.625
0.625
0.719
0.750
0.750
0.906
0.375
0.406
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.906
0.750
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.625
0.750
0.750
0.500
0.500
0.625
0.500
0.500
0.484
0.500
0.500
0.500
0.500
0.562
0.625
0.906
0.625
0.500
0.500
0.500

MODEL NO. PART NO.

62
66
23
53
EQ
EQ
IG
53F1
IG
IG
53R2
3
23
23
26
53
66
53
EQ
EQ
53R1
IG
21
23
53
61
62
66
26
53
53
EQ
EQ
IG
IG
23
53
EQ
23
94
23
21
23
24
53
53
53
53R2
EQ
53
53
53

21702-2657
21527-2657
25003-2658
21086-2659
24801-2659
24802-2659
29507-2659
22987-7880
29500-4163
29502-4163
22627-4904
28003-4255
25003-6361
25003-2660
24600-0933
21086-2660
21527-2660
21086-2662
24801-2874
24802-2874
22537-4837
29500-5716
25001-2663
25003-2663
21086-2663
24060-2663
21702-2663
21527-2663
24600-2664
21086-2664
21086-2665
24801-0811
24802-0811
29500-4480
29502-4480
25003-2666
21086-2666
24802-4390
25003-5331
27223-5331
25003-9640
25001-6293
25003-2669
25005-2669
21086-2669
21086-2670
21086-2671
22627-6563
24801-2672
21086-2675
21086-2678
21086-2681

SHAFT

BORE

WIDTH

4.250
4.250
4.250
4.255
4.279
4.284
4.291
4.295
4.298
4.309
4.310
4.311
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.312
4.313
4.313
4.313
4.313
4.313
4.313
4.313
4.313
4.313
4.321
4.325
4.328
4.330
4.330
4.330
4.331
4.331
4.331
4.331

6.250
6.250
8.250
5.255
5.500
5.284
5.394
5.295
5.298
5.348
5.300
5.331
5.187
5.312
5.312
5.375
5.375
5.437
5.500
5.500
5.500
5.500
5.500
5.500
5.625
5.625
5.750
5.750
5.750
5.794
6.000
6.250
6.375
5.313
5.313
5.313
5.500
5.500
5.500
5.501
5.687
5.750
5.195
5.325
5.203
5.127
5.250
5.393
4.961
5.118
5.118
5.118

0.500
0.562
0.625
0.625
0.375
0.750
0.500
0.375
0.750
0.375
0.475
0.500
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.750
0.969
0.500
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.781
0.438
0.625
0.750
0.500
0.625
0.750
0.438
0.750
0.625
0.500
0.750
0.375
0.511
0.625
0.500
0.625
0.354
0.472
0.512

MODEL NO. PART NO.

62
53
54
EQ
23
IG
23
23
IG
23
23
23
23
23
23
23
53
23
53
62
23
53
IG
53R2
23
53
23
53
53
23
53
53
53F1
23
EQ
IG
23
EQ
IG
23
IG
EQ
23
IG
23
26
EQ
23
IG
26
26R1
26

21702-2681
21086-2682
21140-7351
24802-3038
25003-0929
29500-4464
25003-2949
25003-0992
29502-4769
25003-3012
25003-5075
25003-7595
25003-6851
25003-9862
25003-9143
25003-2684
21086-2684
25003-0736
21086-2687
21702-2687
25003-2689
21086-2689
29502-4115
22627-8635
25003-2690
21086-2690
25003-2693
21086-2693
21086-2694
25003-5606
21086-2699
21086-2705
22987-7232
25003-2696
24801-2042
29502-4296
25003-2687
24802-2700
29500-4115
25003-2691
29502-5123
24802-2689
25003-9761
29502-5735
25003-6957
24600-4635
24802-1817
25003-0587
29507-5266
24600-3260
24620-2034
24600-2686

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-65

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.331
4.332
4.335
4.343
4.362
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375

5.118
5.118
5.125
5.250
5.315
5.315
5.331
5.331
5.331
5.331
5.500
5.500
5.500
5.511
5.511
5.511
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.541
5.562
5.831
5.905
6.693
5.354
5.335
5.342
5.362
5.000
5.250
5.312
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375

0.625
0.690
0.750
0.375
0.433
0.500
0.500
0.625
0.750
0.750
0.437
0.719
0.875
0.472
0.511
0.625
0.472
0.472
0.472
0.472
0.500
0.512
0.512
0.512
0.512
0.551
0.551
0.551
0.551
0.625
0.750
0.750
0.500
0.750
0.500
0.625
0.500
0.625
0.625
0.375
0.750
0.375
0.375
0.750
0.375
0.500
0.500
0.500
0.500
0.625
0.687
0.718

Garlock

MODEL NO. PART NO.

EQ
EQ
IG
23
23
23
23
EQ
IG
IG
23
53F1
53R1
26R1
26R1
EQ
23
53
61
61
23
26
61
61
61
23
26R1
58
59
EQ
IG
IG
23
IG
23
23
94
IG
EQ
23
IG
61
23
IG
23
23
25
53
62
EQ
26R1
53F1

24802-3318
24807-3315
29502-5767
25003-7482
25003-5364
25003-2626
25003-0977
24802-2974
29500-5383
29502-5383
25003-9144
22987-1874
22537-8454
24620-7396
24620-2731
24801-1082
25003-7396
21086-7396
24060-7396
24064-7396
25003-9567
24600-2731
24060-1502
24062-1502
24064-1502
25003-5346
24620-2703
21003-4264
24700-2703
24802-1082
29500-4984
29502-4984
25003-7449
29502-5548
25003-6820
25003-6992
27223-4488
29519-3125
24802-3094
25003-5716
29502-5717
24060-6363
25003-3159
29502-5821
25003-9204
25003-2708
25058-2708
21086-2708
21702-2708
24802-2050
24620-9708
22987-9708

SHAFT

BORE

WIDTH

4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.375
4.409
4.410
4.425
4.429
4.435
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437

5.375
5.375
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.563
5.625
5.625
5.750
5.750
5.812
5.827
5.875
5.875
5.875
5.875
6.000
6.000
6.000
6.000
6.125
6.250
6.250
6.250
9.125
5.709
5.375
5.626
6.297
5.594
5.250
5.437
5.437
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.548
5.562
5.625
5.625
5.687

0.750
0.906
0.500
0.500
0.500
0.562
0.562
0.625
0.750
0.969
0.969
0.500
0.500
0.500
0.500
0.500
0.500
0.484
0.375
0.375
0.500
0.500
0.500
0.500
0.562
0.750
0.500
0.500
0.500
0.562
0.625
0.551
0.625
0.625
0.750
0.500
0.375
0.375
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.750
0.906
1.375
0.500
0.500
0.625
0.500

MODEL NO. PART NO.

IG
53R2
23
53
62
26
53
EQ
IG
53R2
53T2
53
23
53
23
53
23
23
23
25
23
53
53
62
23
IG
53
53
66
53
54
58
26R1
EQ
IG
23
23
23
23
53
62
53
EQ
EQ
EQ
IG
53R1
EQSPB
23
53
62
23

29502-4164
22627-8202
25003-2711
21086-2711
21702-2711
24600-2712
21086-2712
24801-5048
29500-5699
22627-7803
22897-7803
21086-7473
25003-2714
21086-2714
25003-2717
21086-2717
25003-0995
25003-9785
25003-6919
25058-6919
25003-2720
21086-2720
21086-2723
21702-2723
25003-2724
29502-5912
21086-2726
21086-2729
21527-2729
21086-2730
21140-6014
21003-2262
24620-2827
24802-3251
29500-4842
25003-2984
25003-5449
25003-4705
25003-6362
21086-2732
21702-2732
21086-2733
24802-2733
24801-2885
24802-2885
29500-4495
22537-7439
24816-7028
25003-4820
21086-2735
21702-2737
25003-6410

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-66

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.437
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.438
4.443
4.449
4.449
4.449
4.450
4.450
4.450
4.475
4.477
4.488
4.494
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500

5.687
5.750
5.750
5.750
5.750
5.750
5.750
5.812
5.875
5.890
5.937
5.937
6.000
6.000
6.000
6.125
6.201
6.250
6.250
5.375
5.438
5.500
5.500
5.543
5.562
5.625
5.750
5.750
5.875
5.875
5.890
6.000
6.250
5.500
5.472
5.512
6.378
5.325
5.437
5.692
5.500
6.256
5.512
5.925
5.250
5.250
5.250
5.375
5.500
5.500
5.500
5.500

0.625
0.500
0.500
0.500
0.562
0.625
0.719
0.500
0.375
0.484
0.500
0.500
0.500
0.562
0.594
0.500
0.828
0.500
0.562
0.375
0.750
0.500
0.500
1.062
0.750
0.500
0.563
0.625
0.375
0.500
0.625
0.500
0.500
0.625
0.375
0.492
0.750
0.625
0.750
0.500
0.500
0.625
0.750
0.500
0.375
0.500
0.750
0.500
0.375
0.375
0.375
0.375

MODEL NO. PART NO.

23
23
53
62
53
53
53F1
23
23
23
23
24
53
23
23
53
IGSPB
53
53
23
IG
23
26
IGSPB
IG
23
26
EQ
23
23
EQ
23
23
EQ
23
53
IG
EQ
IG
23
23
23
IG
23
26
61
IG
23
21
23
25
26

25003-8444
25003-2738
21086-2738
21702-2738
21086-2739
21086-2740
22987-6917
25003-7821
25003-8534
25003-8490
25003-9085
25005-9085
21086-2744
25003-2745
25003-9600
21086-2747
29516-7122
21086-2750
21086-2751
25003-4842
29502-4297
25003-2732
24600-2732
29516-7099
29502-5707
25003-2735
24600-1697
24802-2963
25003-8543
25003-2816
24802-4743
25003-2744
25003-2750
24802-1840
25003-0408
21086-2818
29500-4841
24802-2740
29502-5132
25003-9672
25003-5003
25003-1020
29502-5813
25003-2790
24600-2763
24060-2756
29502-4213
25003-6015
25001-6363
25003-6363
25058-6363
24600-4614

SHAFT

BORE

WIDTH

4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500

5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.501
5.512
5.543
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.687
5.688
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750

0.375
0.437
0.437
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.625
0.690
0.719
0.750
0.906
0.969
0.969
0.375
0.375
1.050
0.375
0.500
0.500
0.500
0.500
0.562
0.625
0.719
0.500
0.625
0.375
0.375
0.437
0.438
0.438
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625

MODEL NO. PART NO.

61
23
26
61
23
25
26
53
26R1
61
62
66
94
EQ
53
53
EQ
EQ
IG
EQ
53F1
IG
53T2
53R1
53R2
3
23
IGSPB
23
23
53
66
94
53
53
53F1
23
23
23
23
61
23
26
23
26
53
61
62
EQ
53
26
53

24062-6363
25003-4873
24600-4873
24060-4873
25003-2753
25058-2753
24600-2753
21086-2753
24620-2753
24060-2753
21702-2753
21527-2753
27223-2753
24801-2753
21086-2754
21086-2755
24801-2755
24802-2755
29507-2755
24807-3782
22987-5892
29502-4165
22897-7110
22537-6685
22627-6685
28003-4455
25003-6587
29516-7135
25003-7205
25003-2756
21086-2756
21527-2756
27223-2756
21086-2757
21086-2758
22987-8278
25003-1277
25003-1625
25003-2763
25003-4771
24062-1664
25003-1664
24600-4406
25003-2759
24600-2759
21086-2759
24060-2759
21702-2759
24801-2759
21086-2760
24600-2761
21086-2761

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-67

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.500
4.515
4.520
4.527
4.527
4.527
4.527
4.527
4.528
4.528
4.528
4.528
4.528
4.531
4.540

5.750
5.750
5.750
5.750
5.750
5.875
5.875
5.875
5.875
5.937
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.125
6.250
6.250
6.250
6.250
6.250
6.375
6.375
6.375
6.375
6.500
6.988
7.000
7.000
5.515
5.500
5.511
5.512
5.708
5.708
5.709
5.512
5.512
5.512
5.512
5.709
5.531
6.150

0.625
0.750
0.750
0.969
0.969
0.500
0.500
0.500
0.500
0.500
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.750
0.750
0.906
0.500
0.500
0.500
0.500
0.625
0.969
0.500
0.500
0.500
0.625
0.500
0.807
0.531
0.531
0.750
0.750
0.433
0.625
0.551
0.551
0.787
0.472
0.472
0.472
0.625
0.472
0.500
0.625

Garlock

MODEL NO. PART NO.

EQ
IG
IG
53R2
53T2
23
24
53
66
23
23
24
23
24
25
26
53
61
62
53
53
IG
IG
53R1
53
53
62
66
EQ
53T2
23
53
62
53
21
IGSPB
26R1
94
IG
IG
23
EQ
23
26
26R1
23
53
26R1
EQ
92
23
EQ

24801-2761
29500-4391
29502-4391
22627-7258
22897-7258
25003-2762
25005-2762
21086-2762
21527-2762
25003-6801
25003-9132
25005-9132
25003-2765
25005-2765
25058-2765
24600-2765
21086-2765
24060-2765
21702-2765
21086-2766
21086-2767
29500-4212
29502-4212
22537-7560
21086-2768
21086-2771
21702-2771
21527-2771
24801-2291
22897-8697
25003-2774
21086-2774
21702-2774
21086-2776
25001-1380
29516-7148
24620-3542
27223-9543
29502-5754
29502-4604
25003-5365
24802-2780
25003-5347
24600-0841
24620-3419
25003-7271
21086-7271
24620-2279
24801-2780
27063-0869
25003-6748
24802-3105

SHAFT

BORE

WIDTH

4.560
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.562
4.563
4.563
4.563
4.563
4.563
4.563
4.565
4.591
4.599
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625

6.125
5.437
5.562
5.625
5.625
5.687
5.750
5.750
5.750
5.750
5.812
5.875
6.000
6.000
6.062
6.125
6.250
6.250
6.375
5.437
5.543
5.563
5.563
5.750
5.751
5.565
5.508
5.599
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.750
5.750
5.750
5.750
5.750
5.750
5.875
5.875
6.000
6.000
6.000
6.000
6.000

0.625
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
1.062
0.625
0.750
0.500
0.625
0.625
0.625
0.625
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.750
0.500
0.500
0.500
0.562
0.562
0.906
0.500
0.500
0.500
0.500
0.500
0.625
0.625

MODEL NO. PART NO.

EQ
23
23
23
53
23
53
62
26
53
23
53
23
53
23
53
23
53
53
23
IGSPB
EQ
IG
23
EQ
EQ
EQ
EQ
23
23
25
26
53
26R1
62
53
EQ
EQ
IG
23
53
62
26
53
53R2
23
53
23
53
62
53
26R1

24801-2948
25003-9842
25003-4939
25003-2777
21086-2777
25003-4796
21086-2780
21702-2780
24600-2788
21086-2782
25003-8455
21086-2783
25003-2786
21086-2786
25003-0688
21086-2789
25003-2792
21086-2792
21086-2795
25003-4459
29516-7090
24802-2051
29502-2051
25003-2780
24801-2141
24802-3168
24801-5164
24802-2949
25003-6544
25003-2798
25058-2798
24600-2798
21086-2798
24620-2798
21702-2798
21086-2799
24801-2808
24802-2808
29502-4166
25003-2801
21086-2801
21702-2801
24600-2802
21086-2802
22627-7245
25003-2804
21086-2804
25003-2807
21086-2807
21702-2807
21086-2809
24620-2809

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-68

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.640
4.646
4.646
4.656
4.664
4.680
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.687
4.688
4.688
4.705
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724

6.000
6.000
6.077
6.095
6.125
6.125
6.125
6.250
6.250
6.250
5.640
5.039
5.906
6.031
5.875
6.000
5.625
5.687
5.687
5.750
5.750
5.750
5.750
5.812
5.875
5.875
5.937
6.000
6.000
6.250
6.250
6.375
5.688
5.750
5.750
5.512
5.512
5.708
5.708
5.708
5.724
5.905
5.905
5.905
5.906
5.906
5.906
5.906
5.906
5.906
5.910
5.941

0.719
0.969
0.484
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.750
0.625
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.562
0.906
0.500
0.500
0.500
0.500
0.500
0.906
0.500
0.969
0.500
0.750
0.500
0.625
0.512
0.750
0.433
0.433
0.500
0.750
0.433
0.500
0.551
0.472
0.472
0.512
0.512
0.512
0.591
0.472
0.591

MODEL NO. PART NO.

53F1
53T2
23
23
23
24
53
21
23
53
IG
IG
EQ
23
23
EQ
23
23
25
23
53
53
53T2
23
23
53
23
53
53R2
53
53T2
53
IG
26
EQ
26
IG
23
26
23
IG
23
23
23
53
92
26R1
61
61
53
23
26R1

22987-9347
22897-7689
25003-8614
25003-2719
25003-2810
25005-2810
21086-2810
25001-2813
25003-2813
21086-2813
29502-5636
29507-5326
24802-5510
25003-6084
25003-4447
24802-3062
25003-1160
25003-6525
25058-6525
25003-2819
21086-2819
21086-2820
22897-5043
25003-6364
25003-2822
21086-2822
25003-5058
21086-2825
22627-7348
21086-2831
22897-9045
21086-2834
29502-4298
24600-2820
24801-4682
24600-1855
29502-5550
25003-5366
24600-0994
25003-2634
29500-5159
25003-8242
25003-5118
25003-5348
21086-7376
27063-7376
24620-2863
24060-1880
24064-1880
21086-7277
25003-7376
24620-7277

SHAFT

BORE

WIDTH

4.724
4.724
4.724
4.724
4.724
4.725
4.725
4.734
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750

6.000
6.101
6.299
6.299
6.299
5.905
5.906
5.984
5.500
5.500
5.500
5.500
5.500
5.625
5.625
5.625
5.625
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.756
5.875
5.875
5.875
5.875
5.875
5.937
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.125
6.125
6.250
6.250
6.250

0.500
0.500
0.472
0.472
0.472
0.625
0.551
0.500
0.375
0.375
0.500
0.500
0.750
0.437
0.500
0.625
0.625
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.750
0.937
0.625
0.500
0.500
0.500
0.562
0.625
0.500
0.375
0.500
0.500
0.500
0.625
0.625
0.750
0.906
0.906
0.906
0.500
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

23
23
23
26
53
EQ
26
23
26
26R1
61
61
IG
26
23
23
26
23
23
26
53
61
61
62
53
53
EQ
EQ
IG
53R2
EQ
23
26
53
23
53
23
23
23
53
61
26
53
IG
53R1
53R2
53T2
23
53
23
53
62

25003-1024
25003-1303
25003-7836
24600-7836
21086-7836
24802-3179
24600-5348
25003-7587
24600-2841
24620-2841
24060-1667
24064-1667
29502-5410
24600-5439
25003-5443
25003-5495
24600-5495
25003-6213
25003-2837
24600-2837
21086-2837
24060-2837
24064-2837
21702-2837
21086-2838
21086-2839
24801-2931
24802-2931
29502-4167
22627-5285
24801-2510
25003-2840
24600-2840
21086-2840
25003-6431
21086-2842
25003-9839
25003-7795
25003-2843
21086-2843
24060-2843
24600-2845
21086-2845
29502-4218
22537-4836
22627-4836
22897-4836
25003-2846
21086-2846
25003-2849
21086-2849
21702-2849

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-69

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.750
4.788
4.803
4.810
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.812
4.813
4.813
4.835
4.851
4.866
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875

6.250
6.250
6.250
6.250
6.250
6.375
6.500
9.250
6.000
5.906
6.000
5.750
5.812
5.812
5.812
5.875
5.875
5.875
5.905
5.937
6.000
6.000
6.125
6.250
6.375
6.007
6.313
6.250
5.886
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.938
5.980
5.983
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.062
6.125

0.625
0.625
0.625
0.750
0.906
0.500
0.625
0.625
0.625
0.500
0.625
0.500
0.375
0.500
0.750
0.500
0.500
0.625
0.562
0.375
0.500
0.500
0.500
0.500
0.625
0.375
0.500
0.500
0.750
0.500
0.375
0.500
0.500
0.500
0.500
0.625
0.625
0.750
0.500
1.062
1.375
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.906
0.906
0.500
0.500

Garlock

MODEL NO. PART NO.

26
53
EQ
23
53R2
53
26
54
EQ
23
EQ
23
23
23
IG
23
53
53
53
23
23
53
23
53
53
23
23
62
IG
23
23
23
53
26R1
62
53
EQ
IG
23
IGSPB
EQSPB
23
53
23
26
53
EQ
EQ
53R2
53T2
23
23

24600-2851
21086-2851
24801-2851
25003-4934
22627-7877
21086-2852
24600-2853
21140-9986
24801-3165
25003-2496
24801-3164
25003-4759
25003-8402
25003-6491
29502-4299
25003-2855
21086-2855
21086-2857
21086-9558
25003-7857
25003-2858
21086-2858
25003-2861
21086-2864
21086-2869
25003-1248
25003-4536
21702-8132
29502-4837
25003-1007
25003-5166
25003-2870
21086-2870
24620-0664
21702-2870
21086-2872
24802-2048
29502-4168
25003-5880
29516-7089
24816-7007
25003-2873
21086-2873
25003-2875
24600-2875
21086-2875
24801-2875
24802-2875
22627-8630
22897-8630
25003-3143
25003-2876

SHAFT

BORE

WIDTH

4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.875
4.882
4.910
4.920
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.922
4.922
4.928
4.935
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937

6.125
6.125
6.125
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.325
6.375
6.375
6.375
6.500
6.500
6.625
6.625
6.625
6.750
7.000
6.299
5.910
6.125
5.906
5.906
5.906
5.906
5.906
6.102
6.102
6.102
6.299
6.299
6.299
6.299
6.692
6.890
5.922
6.063
6.250
6.000
5.937
5.937
5.982
6.000
6.000
6.000
6.000
6.000

0.500
0.625
0.625
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.858
0.500
0.500
0.500
0.509
0.500
0.906
0.500
0.906
0.969
0.500
0.750
0.413
0.500
0.437
0.472
0.472
0.472
0.500
0.591
0.551
0.551
0.625
0.472
0.512
0.590
0.709
0.472
0.625
0.500
0.487
0.500
0.625
0.375
0.500
1.375
0.375
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

53
23
53
23
24
26
53
66
23
26
53
26
23
23
24
53
53
53R2
53
53T2
53T2
53
IG
23
23
23
23
58
92
61
23
23
26R1
EQ
92
23
26
23
26R1
EQ
23
23
26
EQ
23
23
EQSPB
23
23
53
62
EQ

21086-2876
25003-2878
21086-2878
25003-2879
25005-2879
24600-2879
21086-2879
21527-2879
25003-2880
24600-2881
21086-2881
24600-2886
25003-1241
25003-2882
25005-2882
21086-2882
21086-2885
22627-6814
21086-2888
22897-6463
22897-4708
21086-2891
29500-5119
25003-1707
25003-2024
25003-6638
25003-2887
21003-2887
27063-2887
24063-2811
25003-1259
25003-5354
24620-5354
24801-5089
27063-0873
25003-2293
24600-2889
25003-1397
24620-2890
24801-2930
25003-5459
25003-5377
24600-2900
24801-3790
25003-6754
25003-6561
24816-7029
25003-8629
25003-2894
21086-2894
21702-2894
24801-2894

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-70

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.937
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.960
4.969
4.969
4.984
4.987
4.987
4.999
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000

6.000
6.000
6.000
6.062
6.125
6.187
6.250
6.250
6.375
6.375
6.437
6.437
6.437
6.437
6.500
6.500
6.500
6.500
6.750
5.500
5.500
5.750
5.875
5.938
5.938
5.938
5.980
6.000
6.125
6.250
6.375
6.988
7.000
7.382
5.885
6.375
6.375
6.234
6.000
6.000
5.905
5.625
5.750
5.750
5.750
5.875
5.875
5.980
5.982
6.000
6.000
6.000

0.625
0.625
0.625
0.500
0.500
0.500
0.500
0.562
0.500
0.562
0.500
0.500
0.562
0.750
0.500
0.625
0.719
0.906
0.500
0.625
0.690
0.500
0.500
0.438
0.625
0.750
1.062
0.750
0.500
0.500
0.500
0.827
0.750
0.918
0.500
0.500
0.500
0.500
0.500
0.500
0.512
0.375
0.437
0.500
0.500
0.375
0.500
1.062
1.375
0.375
0.437
0.500

MODEL NO. PART NO.

23
53
EQ
23
53
23
53
53
53
23
23
24
23
23
53
53
53F1
53R2
53
IG
EQ
23
23
23
EQ
IG
IGSPB
IG
23
23
23
IGSPB
IG
IGSPB
23
23
94
23
23
26
58
61
26
61
EQ
23
23
IGSPB
EQSPB
23
23
21

25003-2896
21086-2896
24802-2896
25003-9791
21086-2897
25003-5138
21086-2900
21086-2901
21086-2903
25003-2904
25003-7867
25005-7867
25003-5052
25003-6178
21086-2906
21086-2908
22987-6902
22627-7315
21086-2912
29507-5563
24807-4652
25003-2977
25003-2910
25003-2893
24802-2539
29502-4300
29516-7100
29500-4472
25003-2897
25003-2900
25003-2903
29516-7123
29500-4647
29516-7134
25003-1025
25003-9372
27223-9372
25003-9268
25003-2518
24600-2913
21003-2710
24060-1670
24600-2932
24060-1966
24801-1051
25003-9702
25003-2974
29516-7102
24816-7030
25003-6365
25003-9389
25001-2915

SHAFT

BORE

WIDTH

5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000

6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.062
6.125
6.125
6.125
6.125
6.125
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.256
6.375

0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.687
0.719
0.750
0.906
0.906
0.969
0.969
0.969
0.500
0.500
0.500
0.500
0.500
0.563
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.562
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.906
0.969
0.969
0.625
0.500

MODEL NO. PART NO.

23
25
26
53
26R1
61
61
61
61
62
53
53
EQ
23
53F1
IG
53R1
53R2
53F1
53R2
53T2
23
23
25
53
61
23
23
25
26
53
26R1
61
62
23
26
53
62
23
25
26
53
26R1
EQ
EQ
IG
IG
53R2
53T2
53TF
EQ
23

25003-2915
25058-2915
24600-2915
21086-2915
24620-2915
24060-2915
24061-2915
24062-2915
24063-2915
21702-2915
21086-2916
21086-2917
24802-2917
25003-5585
22987-6603
29502-4169
22537-6711
22627-6711
22987-6893
22627-6640
22897-6640
25003-5222
25003-2918
25058-2918
21086-2918
24062-2918
25003-2919
25003-2921
25058-2921
24600-2921
21086-2921
24620-2921
24060-2921
21702-2921
25003-2922
24600-2922
21086-2922
21702-2922
25003-2923
25058-2923
24600-2923
21086-2923
24620-2923
24801-2923
24802-2923
29519-2923
29502-4203
22627-4828
22897-6893
22994-6893
24802-2924
25003-2924

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-71

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.060
5.062
5.062
5.062
5.062
5.062
5.062
5.062
5.062
5.062
5.063
5.063
5.088
5.094
5.098
5.115
5.115
5.115
5.118

6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.437
6.437
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.563
6.625
6.750
6.750
6.875
7.000
7.000
7.000
7.125
7.250
7.375
7.500
9.750
5.934
6.062
6.125
6.125
6.125
6.250
6.250
6.375
6.375
7.875
6.063
6.125
6.088
6.586
6.598
6.115
6.115
6.118
5.992

0.500
0.625
0.625
0.625
0.625
0.719
0.750
0.500
0.500
0.375
0.500
0.500
0.500
0.500
0.562
0.562
0.625
0.750
0.906
0.906
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.750
0.500
0.500
0.500
0.500
0.625
0.375
0.500
0.500
0.500
0.500
0.500
0.625
0.562
0.562
0.500
0.750
0.500
0.625
0.484
0.500
0.500
0.625
0.375
0.375

Garlock

MODEL NO. PART NO.

53
23
53
EQ
EQ
53F1
23
23
25
23
23
53
61
62
23
26
53
23
53R2
53T2
24
53
53
53
53
53
53
IG
53
53
53
53
54
23
23
23
53
62
53
94
23
25
94
IG
26
EQ
23
23
23
EQ
23
23

21086-2924
25003-2926
21086-2926
24801-3785
24802-3785
22987-6137
25003-9483
25003-2973
25058-2973
25003-6453
25003-2927
21086-2927
24060-2927
21702-2927
25003-2928
24600-2928
21086-2929
25003-6939
22627-4668
22897-4668
25005-9930
21086-2930
21086-2933
21086-2935
21086-2936
21086-2939
21086-2941
29500-5645
21086-2942
21086-2945
21086-2948
21086-2951
21140-6018
25003-0419
25003-6485
25003-2954
21086-2954
21702-2954
21086-2957
27223-2959
25003-6147
25058-6147
27223-6329
29502-4301
24600-3583
24802-2986
25003-1229
25003-0581
25003-5490
24802-3095
25003-0926
25003-5797

SHAFT

BORE

WIDTH

5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.118
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.125

5.993
6.118
6.259
6.260
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.614
6.000
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.250
6.250
6.250
6.250
6.250
6.250
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.500
6.500
6.500
6.500
6.500
6.625
6.625
6.625
6.750

0.500
0.500
0.472
0.488
0.472
0.472
0.511
0.551
0.551
0.590
0.591
0.625
0.630
0.500
0.375
0.375
0.422
0.437
0.500
0.500
0.500
0.500
0.625
0.750
0.843
0.843
0.906
0.969
0.500
0.500
0.500
0.562
0.562
0.906
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.625
0.625
0.500
0.500
0.625
0.625
0.906
0.484
0.500
0.750
0.500

MODEL NO. PART NO.

23
23
23
23
23
92
23
26R1
58
26
23
EQ
23
23
23
25
23
23
23
25
26
53
53
IG
53R1
53R2
53T2
53T2
23
53
EQ
23
53
53R2
23
53
62
23
53
23
26
53
EQ
23
53
23
53
53R2
23
53
23
53

25003-0815
25003-5388
25003-5367
25003-1002
25003-4656
27063-4656
25003-7221
24620-2989
21003-2989
24600-2988
25003-2988
24802-3022
25003-0956
25003-2274
25003-5189
25058-5189
25003-6392
25003-6198
25003-2990
25058-2990
24600-2990
21086-2990
21086-2992
29502-4170
22537-6432
22627-6432
22897-7347
22897-7365
25003-2993
21086-2993
24801-0951
25003-2994
21086-2994
22627-7361
25003-2996
21086-2996
21702-2996
25003-2997
21086-2997
25003-2998
24600-2998
21086-2998
24802-2998
25003-2999
21086-2999
25003-3001
21086-3001
22627-4982
25003-9541
21086-3002
25003-8137
21086-3005

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-72

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.125
5.125
5.125
5.125
5.125
5.125
5.125
5.161
5.181
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.187
5.188
5.188
5.188
5.188
5.188
5.196
5.203
5.225
5.225
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250

7.000
7.000
7.000
7.250
7.500
7.500
7.500
6.475
6.118
6.187
6.250
6.250
6.250
6.375
6.437
6.437
6.500
6.500
6.500
6.625
6.750
7.000
7.000
7.500
7.500
6.188
6.188
6.250
6.375
6.375
6.299
6.312
6.225
6.513
6.000
6.000
6.000
6.000
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.256
6.313

0.500
0.625
0.719
0.500
0.500
0.500
0.625
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.500
0.500
0.750
0.500
0.500
0.625
0.750
0.500
0.500
1.116
0.500
0.500
0.500
0.625
0.375
0.500
0.625
0.750
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.750
0.750
0.625
0.500

MODEL NO. PART NO.

53
53
53F1
53
21
53
53
23
EQ
23
23
53
26R1
53
23
23
23
53
53
53
53
53
IG
21
53
EQ
IG
26
23
IGSPB
23
23
23
23
26
61
EQ
IG
23
23
25
26
53
58
61
62
EQ
EQ
23
IG
EQ
23

21086-3011
21086-3013
22987-9429
21086-3017
25001-3023
21086-3023
21086-3025
25003-1779
24802-3727
25003-4660
25003-3026
21086-3026
24620-3026
21086-3029
25003-8215
25003-6136
25003-3032
21086-3032
21086-3034
21086-3035
21086-3038
21086-3044
29502-5385
25001-3056
21086-3056
24801-2766
29502-4302
24600-3026
25003-3029
29516-7121
25003-9275
25003-5516
25003-6579
25003-3163
24600-5457
24060-1674
24802-3057
29502-5424
25003-5900
25003-3059
25058-3059
24600-3059
21086-3059
21003-3059
24060-3059
21702-3059
24801-5792
24802-2270
25003-8657
29502-4171
24801-3063
25003-1635

SHAFT

BORE

WIDTH

5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.250
5.280
5.302
5.305
5.312
5.312
5.312
5.312
5.312
5.312

6.375
6.375
6.437
6.437
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.562
6.625
6.625
6.625
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
7.000
7.000
7.000
7.125
7.125
7.250
10.750
6.280
6.302
6.305
6.312
6.375
6.500
6.500
6.500
6.562

0.500
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.719
0.750
0.969
1.344
0.750
0.500
0.500
0.625
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.687
0.750
0.750
0.906
0.500
0.500
0.500
0.500
0.906
0.625
0.687
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625

MODEL NO. PART NO.

23
53
23
23
23
25
53
26R1
61
62
23
26
53
62
88
88NS
EQ
53F1
IG
53T2
53R2
23
23
53
53
23
24
53
61
62
23
EQ
23
23
IG
53R2
53
61
62
53
53R2
26
54
23
23
23
23
53
23
53
62
23

25003-3062
21086-3062
25003-5697
25003-5696
25003-3065
25058-3065
21086-3065
24620-3065
24060-3065
21702-3065
25003-3067
24600-3067
21086-3067
21702-3067
26088-3067
26188-3067
24802-3067
22987-5171
29502-4208
22897-6750
22627-5621
25003-4733
25003-3068
21086-3068
21086-3070
25003-3071
25005-3071
21086-3071
24060-3071
21702-3071
25003-3073
24802-3073
25003-9642
25003-6366
29502-2573
22627-7610
21086-3077
24060-3077
21702-3077
21086-3080
22627-9972
24600-1705
21140-6020
25003-5717
25003-3090
25003-2022
25003-7132
21086-3092
25003-3095
21086-3095
21702-3095
25003-5092

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-73

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.312
5.312
5.312
5.312
5.312
5.312
5.312
5.312
5.312
5.312
5.312
5.313
5.313
5.313
5.313
5.314
5.314
5.314
5.314
5.315
5.315
5.315
5.315
5.315
5.315
5.315
5.315
5.315
5.344
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375

6.578
6.625
6.625
6.625
6.687
6.750
6.750
6.812
6.875
6.937
7.250
6.313
6.375
6.375
6.375
6.496
6.692
6.692
6.814
6.299
6.456
6.496
6.496
6.614
6.693
6.693
6.693
6.693
6.312
6.125
6.125
6.312
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.625

0.500
0.500
0.500
0.719
0.625
0.500
0.500
0.500
0.500
0.500
0.500
0.750
0.500
1.062
1.187
0.551
0.512
0.590
0.500
0.500
0.487
0.315
0.625
0.709
0.472
0.500
0.591
0.625
0.500
0.500
0.750
0.500
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.750
0.750
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.750
0.500

Garlock

MODEL NO. PART NO.

23
23
53
53F1
23
53
62
23
53
23
53
IG
23
IGSPB
IGSPB
23
26
26R1
24
23
23
61
EQ
26
23
23
23
EQ
23
61
IG
23
23
21
23
25
26
53
26R1
61
62
EQ
IG
23
53
66
23
53
23
53
23
23

25003-4786
25003-3098
21086-3098
22987-7252
25003-4425
21086-3101
21702-3101
25003-5931
21086-3104
25003-9251
21086-3113
29502-4303
25003-3092
29516-7091
29516-7072
25003-5355
24600-9175
24620-3118
25005-9206
25003-5511
25003-5378
24060-1884
24801-5088
24600-2047
25003-9175
25003-2572
25003-3118
24802-3162
25003-4575
24060-1676
29502-5745
25003-4576
25003-6622
25001-3122
25003-3122
25058-3122
24600-3122
21086-3122
24620-3122
24060-3122
21702-3122
24801-1864
29502-1864
25003-3125
21086-3125
21527-3125
25003-3126
21086-3126
25003-3127
21086-3127
25003-4451
25003-3128

SHAFT

BORE

WIDTH

5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.375
5.415
5.420
5.433
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.437
5.438
5.438
5.438
5.438
5.438
5.438
5.438
5.438
5.438
5.438
5.438

6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.687
6.750
6.750
6.750
6.875
6.875
6.875
6.875
6.875
7.000
7.125
7.500
7.500
6.815
6.625
7.008
6.375
6.437
6.500
6.625
6.656
6.687
6.750
6.750
6.750
6.750
6.875
6.875
6.937
6.937
7.000
7.125
7.250
7.500
6.438
6.500
6.500
6.625
6.625
6.688
6.720
6.750
6.750
6.750
6.875

0.500
0.500
0.562
0.562
0.563
0.625
0.625
0.562
0.500
0.500
0.625
0.500
0.500
0.500
0.625
0.750
0.625
0.625
0.625
0.625
0.500
0.500
0.630
0.500
0.500
0.500
0.500
0.463
0.625
0.500
0.500
0.562
0.625
0.500
0.969
0.625
0.750
0.500
0.500
0.500
0.500
0.750
0.500
0.525
0.500
0.500
0.625
0.625
0.750
0.983
1.250
0.750

MODEL NO. PART NO.

53
66
23
53
62
23
53
111
23
53
26
23
53
66
53
23
53
53
21
53
23
23
26
23
23
23
53
23
23
23
53
53
23
53
53F1
23
25
53
53
53
21
IG
61
23
23
26
EQ
23
23
IGSPB
EQSPB
23

21086-3128
21527-3128
25003-3129
21086-3129
21702-3129
25003-3130
21086-3130
21011-4559
25003-3131
21086-3131
24600-3124
25003-3134
21086-3134
21527-3134
21086-3136
25003-7124
21086-3139
21086-3142
25001-3151
21086-3151
25003-1089
25003-4841
24600-4226
25003-0627
25003-4750
25003-0738
21086-3152
25003-6532
25003-6367
25003-3155
21086-3155
21086-3156
25003-3157
21086-3158
22987-5027
25003-8575
25058-8782
21086-3161
21086-3164
21086-3167
25001-3174
29502-4304
24060-0738
25003-4713
25003-3152
24600-3173
24802-2904
25003-1250
25003-1777
29516-7103
24816-7049
25003-3144

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-74

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.438
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500

6.875
6.250
6.250
6.250
6.375
6.375
6.375
6.375
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.563
6.625
6.625
6.625
6.625
6.625
6.625
6.632
6.687
6.693
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.756
6.765

0.750
0.312
0.437
0.438
0.437
0.500
0.500
0.563
0.250
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.719
0.750
0.906
0.906
0.500
0.406
0.500
0.500
0.562
0.562
0.625
0.500
0.625
0.750
0.437
0.500
0.500
0.500
0.500
0.562
0.562
0.575
0.625
0.625
0.625
0.625
0.625
0.625
0.687
0.719
0.750
0.750
0.906
0.500
0.500

MODEL NO. PART NO.

IG
76
61
26
23
23
61
26
61
23
25
26
53
58
61
62
53
53F1
IG
53R1
53R2
23
23
23
53
23
53
53
26R1
23
IG
3
23
26
53
61
26
53
23
23
26
53
62
EQ
EQ
23
53F1
23
IG
53R2
23
23

29500-4504
26193-7534
24060-1679
24600-3177
25003-2624
25003-1682
24060-1682
24600-3019
24060-1683
25003-3176
25058-3176
24600-3176
21086-3176
21003-3176
24060-3176
21702-3176
21086-3178
22987-6741
29502-4172
22537-4825
22627-4825
25003-0743
25003-3212
25003-3179
21086-3179
25003-3180
21086-3180
21086-3181
24620-3186
25003-4420
29502-5279
28003-5680
25003-3182
24600-3182
21086-3182
24060-3182
24600-3183
21086-3183
25003-2409
25003-3184
24600-3184
21086-3184
21702-3184
24801-3184
24802-3184
25003-2159
22987-8306
25003-6574
29502-6574
22627-7409
25003-4461
25003-6540

SHAFT

BORE

WIDTH

5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.500
5.511
5.511
5.511
5.511
5.511
5.511
5.511
5.511
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512

6.875
6.875
6.875
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.125
7.250
7.250
7.500
8.268
10.250
6.299
6.511
6.692
6.692
6.693
6.693
6.811
7.011
6.387
6.496
6.496
6.496
6.512
6.692
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.890
6.890
7.087
7.087
7.087

0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.828
0.969
0.500
0.500
0.500
0.500
0.500
0.750
0.511
0.500
0.590
0.625
0.472
0.591
0.547
0.500
0.375
0.394
0.492
0.625
0.625
0.500
0.295
0.472
0.551
0.551
0.551
0.551
0.591
0.630
0.750
0.709
0.709
0.591
0.625
0.630

MODEL NO. PART NO.

23
53
23
23
24
25
53
26R1
61
62
23
53
62
23
26
26R1
26R1
53T2
53
26
53
53
94
IG
26R1
23
26
23
23
53
23
24
23
61
23
EQ
EQ
23
26
92
23
53
26R1
61
23
59
IG
23
26
61
23
26

25003-3185
21086-3185
25003-1961
25003-3188
25005-3188
25058-3188
21086-3188
24620-0963
24060-3188
21702-3188
25003-3190
21086-3190
21702-3190
25003-5010
24600-3189
24620-5010
24620-3193
22897-5923
21086-3191
24600-3194
21086-3194
21086-3200
27223-8960
29502-4735
24620-3201
25003-4831
24600-7267
25003-5861
25003-1718
21086-7267
25003-5368
25005-5526
25003-4489
24060-1898
25003-2019
24801-5140
24802-3728
25003-9158
24600-3203
27063-1718
25003-7383
21086-7383
24620-7383
24060-7383
25003-7267
24700-1134
29500-4994
25003-3204
24600-3204
24060-2461
25003-3148
24600-2098

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-75

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.515
5.523
5.562
5.562
5.562
5.562
5.562
5.562
5.562
5.562
5.562
5.563
5.591
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.625
5.635
5.687

6.497
6.500
6.562
6.625
6.625
6.750
6.750
6.875
7.250
7.375
7.500
6.563
6.378
6.624
6.625
6.625
6.625
6.625
6.625
6.625
6.750
6.750
6.750
6.750
6.750
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
7.000
7.000
7.125
7.125
7.125
7.125
7.250
7.250
7.375
7.500
7.500
8.000
11.375
6.874
6.750

0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.906
0.500
0.500
0.625
0.750
0.750
0.625
0.375
0.453
0.500
0.500
0.625
0.750
0.500
0.500
0.500
0.625
0.906
0.219
0.281
0.500
0.500
0.562
0.625
0.625
0.625
0.625
0.719
0.750
0.969
0.500
0.750
0.500
0.500
0.500
0.750
0.500
0.625
0.500
0.500
0.719
0.500
1.000
0.750
0.500

Garlock

MODEL NO. PART NO.

23
23
23
23
53
23
53
53R2
53
53
53
IG
IG
EQ
26R1
23
23
53
53
IG
23
53
62
23
53R1
61
61
23
53
53
23
26
53
EQ
53F1
IG
53R2
53
23
23
24
53
23
53
53
53
53
53F1
21
54
IG
23

25003-0674
25003-0500
25003-9760
25003-3203
21086-3203
25003-6150
21086-3208
22627-7111
21086-3218
21086-3221
21086-3226
29502-4305
29502-5549
24801-1177
24620-3232
25003-5726
25003-3228
21086-3228
21086-3230
29502-4173
25003-3231
21086-3231
21702-3231
25003-3233
22537-4711
24060-2296
24061-2316
25003-3234
21086-3234
21086-3235
25003-3236
24600-3236
21086-3236
24802-3236
22987-8471
29500-4830
22627-5324
21086-3237
25003-4762
25003-3240
25005-3240
21086-3240
25003-6368
21086-3243
21086-3245
21086-3246
21086-3249
22987-7002
25001-6963
21140-6021
29502-5774
25003-3253

SHAFT

BORE

WIDTH

5.687
5.687
5.687
5.687
5.687
5.687
5.687
5.687
5.687
5.687
5.687
5.687
5.688
5.688
5.708
5.708
5.708
5.709
5.748
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750

6.750
6.875
6.937
6.937
7.000
7.000
7.187
7.187
7.375
7.375
7.500
7.500
6.688
6.750
6.889
6.889
7.086
7.087
7.087
6.375
6.500
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.937
6.938
6.938
6.950
6.968
7.000
7.000

0.500
0.625
0.500
0.625
0.500
0.625
0.500
0.500
0.500
0.625
0.500
0.906
0.750
0.625
0.551
0.551
0.630
0.591
0.591
0.500
0.500
0.437
0.438
0.438
0.438
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.750
0.750
0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.500
1.116
1.250
0.305
0.500
0.375
0.500

MODEL NO. PART NO.

53
53
23
23
53
23
23
24
53
53
53
53R2
IG
23
23
26R1
23
23
23
61
61
23
23
88
88NS
23
25
26
53
66
53
26
62
EQ
IG
IG
23
25
53
62
66
23
62
23
62
23
IGSPB
EQSPB
26
23
23
23

21086-3253
21086-3258
25003-7362
25003-9914
21086-3259
25003-7444
25003-9663
25005-9663
21086-3268
21086-3270
21086-3271
22627-5090
29502-4306
25003-3258
25003-5349
24620-5349
25003-3197
25003-4415
25003-0519
24060-1684
24060-1685
25003-7172
25003-3276
26088-7172
26188-7172
25003-3275
25058-3275
24600-0672
21086-3275
21527-3275
21086-3276
24600-3277
21702-3277
24802-3277
29500-4174
29502-4174
25003-3278
25058-3278
21086-3278
21702-3278
21527-3278
25003-3279
21702-3279
25003-3280
21702-3280
25003-6728
29516-7126
24816-7055
24600-3287
25003-6474
25003-6924
25003-3281

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-76

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.750
5.780
5.800
5.812
5.812
5.812
5.812
5.812
5.812
5.812
5.812
5.812
5.812
5.813
5.866

7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.125
7.125
7.125
7.202
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.375
7.375
7.500
7.500
7.500
7.500
7.500
7.500
8.858
7.030
6.800
6.812
6.812
6.875
6.937
7.000
7.000
7.125
7.250
7.375
7.500
7.250
6.875

0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.625
0.625
0.625
0.625
0.844
0.906
0.969
0.969
1.031
0.500
0.500
0.562
0.734
0.500
0.500
0.500
0.625
0.750
0.906
1.032
1.344
0.500
0.625
0.500
0.500
0.500
0.562
0.562
0.750
0.750
0.625
0.500
0.500
0.750
0.500
0.500
0.500
0.562
0.500
0.500
0.500
0.500
0.625
0.562

MODEL NO. PART NO.

26
53
59
62
66
23
53
62
23
26
53
62
53R2
53R2
53T2
66T2
53R2
23
53
62
23
23
24
53
53
23
53R1
53R2
53R1
53
53
23
53
66
21
23
53
94
23
23
23
IG
53
23
53
62
53
53
53
53
23
58

24600-3281
21086-3281
24700-3281
21702-3281
21527-3281
25003-3282
21086-3282
21702-3282
25003-3283
24600-3283
21086-3283
21702-3283
22627-9854
22627-6166
22897-7128
23728-7128
22627-5710
25003-3284
21086-3284
21702-0752
25003-9440
25003-3287
25005-3287
21086-3287
21086-3289
25003-9017
22537-5420
22627-9422
22537-8818
21086-3290
21086-3292
25003-3293
21086-3293
21527-3293
25001-3288
25003-3288
21086-3296
27223-5672
25003-5636
25003-7507
25003-9197
29502-4307
21086-3297
25003-7275
21086-3300
21702-3301
21086-3305
21086-3306
21086-3309
21086-3312
25003-3308
21003-2033

SHAFT

BORE

WIDTH

5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.875
5.897
5.905
5.905
5.905
5.905
5.905
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906

6.750
6.875
6.875
6.875
6.875
6.875
6.875
6.938
6.938
7.000
7.000
7.000
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.140
7.250
7.250
7.250
7.375
7.375
7.375
7.375
7.375
7.375
7.500
7.500
7.500
7.147
7.086
7.087
7.087
7.087
7.480
6.906
6.906
6.906
7.086
7.087
7.087
7.087
7.087
7.087
7.087
7.204
7.283
7.405
7.410

0.625
0.437
0.500
0.500
0.500
0.500
0.750
1.116
1.523
0.500
0.500
0.500
0.455
0.500
0.562
0.625
0.625
0.750
0.828
0.562
0.500
0.500
0.906
0.500
0.500
0.563
0.625
0.625
0.750
0.500
0.563
0.750
0.625
0.551
0.512
0.625
0.630
0.590
0.500
0.750
0.750
0.551
0.472
0.551
0.551
0.591
0.591
0.625
0.547
0.708
0.500
0.625

MODEL NO. PART NO.

23
23
23
25
26
53
IG
IGSPB
EQSPB
23
53
66
23
53
53
23
53
IG
66TF
23
23
53
53R1
23
53
23
23
26
23
53
23
21
23
26R1
23
EQ
23
26
23
IG
IG
23
92
26
59
23
58
EQ
23
23
24
23

25003-3303
25003-6164
25003-3316
25058-3316
24600-0674
21086-3316
29502-4175
29516-7125
24816-7118
25003-3319
21086-3319
21527-3319
25003-9880
21086-3322
21086-3323
25003-3324
21086-3324
29502-4211
23763-6914
25003-5597
25003-3325
21086-3325
22537-8480
25003-3328
21086-3328
25003-4585
25003-3330
24600-3330
25003-9142
21086-3331
25003-3332
25001-3334
25003-3171
24620-5335
25003-1111
24801-1349
25003-2341
24600-4395
25003-9751
29500-4831
29502-4831
25003-5335
27063-0875
24600-5335
24700-5335
25003-3327
21003-3327
24802-1349
25003-5369
25003-4862
25005-9952
25003-7117

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-77

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

5.906
5.906
5.906
5.935
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.937
5.938
5.938
5.938
5.938
5.938
5.938
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000

7.480
7.590
7.906
6.963
6.875
6.937
7.000
7.000
7.000
7.000
7.125
7.187
7.187
7.250
7.250
7.375
7.437
7.500
7.500
7.625
7.625
7.687
6.938
7.250
7.343
7.375
7.438
7.625
6.750
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.059

0.591
0.539
0.500
0.517
0.500
0.500
0.500
0.500
0.500
0.625
0.500
0.500
0.625
0.500
0.625
0.500
0.750
0.500
0.906
0.500
0.500
0.625
0.750
0.625
1.200
0.500
0.500
0.500
0.750
0.375
0.437
0.437
0.438
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.562
0.625
0.625
0.625
0.625
0.750
0.750
0.969
0.969
1.156
0.750

Garlock

MODEL NO. PART NO.

23
23
23
26
23
23
23
53
62
53
53
23
23
53
53
53
23
53
53R1
53
62
23
IG
23
IGSPB
23
23
23
IG
23
23
26R1
26
21
23
25
53
59
61
62
113
53
23
53
EQ
EQ
26
IG
53R2
53T2
53R1
IG

25003-2233
25003-5379
25003-1374
24600-1259
25003-0741
25003-7298
25003-3335
21086-3335
21702-3335
21086-3337
21086-3338
25003-7647
25003-7481
21086-3341
21086-3343
21086-3344
25003-7214
21086-3347
22537-8708
21086-3351
21702-3351
25003-9031
29502-4308
25003-3343
29516-7110
25003-3344
25003-2793
25003-3351
29502-5285
25003-0530
25003-6165
24620-3354
24600-3354
25001-3355
25003-3355
25058-3355
21086-3355
24700-3355
24060-3355
21702-3355
21012-3355
21086-3356
25003-3357
21086-3357
24801-3357
24802-3357
24600-3362
29502-3362
22627-6746
22897-6746
22537-8870
29502-5555

SHAFT

BORE

WIDTH

6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000

7.085
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.187
7.203
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.340
7.343
7.343
7.375
7.375
7.375
7.375
7.406
7.452
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500

0.438
0.437
0.500
0.562
0.562
0.625
0.625
0.625
0.719
0.750
0.750
0.500
0.500
0.500
0.625
0.625
0.625
0.625
1.343
1.375
0.983
1.375
0.500
0.500
0.750
0.750
0.588
0.734
0.375
0.375
0.500
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.719
0.750
0.750
0.750
0.750
0.750
0.750
0.906
0.906
0.906

MODEL NO. PART NO.

23
23
53
23
53
23
26
53
23
23
23
23
26
53
23
25
53
62
53R2
EQSPB
IGSPB
EQSPB
23
53
IG
IG
23
23
23
26
23
24
25
53
59
62
23
25
26
53
59
EQ
53F1
21
23
25
53
IG
IG
53F1
53R1
53R2

25003-4789
25003-2680
21086-3358
25003-3359
21086-3359
25003-3360
24600-6042
21086-3360
25003-9023
25003-1689
25003-4726
25003-3361
24600-3361
21086-3361
25003-3363
25058-3363
21086-3363
21702-3363
22627-7202
24816-7040
29516-5504
24816-7068
25003-3364
21086-3364
29500-5481
29502-5481
25003-3196
25003-9458
25003-1172
24600-3379
25003-3367
25005-3367
25058-3367
21086-3367
24700-3367
21702-3367
25003-3369
25058-3369
24600-3389
21086-3369
24700-1024
24802-1024
22987-9304
25001-3370
25003-3370
25058-3370
21086-3370
29500-3370
29502-3370
22987-7433
22537-7433
22627-7433

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-78

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.000
6.002
6.030
6.032
6.062
6.062
6.062
6.062
6.062
6.062
6.062
6.062
6.062
6.063
6.063
6.063
6.063
6.063
6.063
6.063
6.063
6.100
6.102
6.102
6.102
6.102
6.102
6.109
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125

7.500
7.500
7.531
7.625
7.625
7.625
7.625
7.625
8.250
7.002
7.324
7.312
7.062
7.125
7.312
7.349
7.375
7.500
7.500
7.562
7.687
7.062
7.063
7.063
7.063
7.087
7.343
7.500
7.500
6.875
6.850
7.086
7.087
7.087
7.102
7.094
7.000
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.187
7.250
7.250
7.250
7.250
7.250

0.906
1.344
0.588
0.500
0.500
0.562
0.625
0.750
0.750
0.500
0.615
0.500
0.375
0.500
0.625
1.375
0.500
0.500
0.750
0.750
0.500
0.500
0.390
0.438
0.750
0.413
1.187
0.500
0.750
0.625
0.472
0.590
0.500
0.591
0.500
0.492
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.500
0.500
0.500
0.625
0.625
0.625

MODEL NO. PART NO.

53T2
53R2
23
53
62
53
26
53
21
23
23
23
23
23
23
EQSPB
23
53
23
23
23
23
23
23
IG
23
IGSPB
23
IG
61
26
26R1
23
59
23
23
23
23
25
53
62
26
53
26R1
IG
IG
23
23
53
23
25
53

22897-7433
22627-4784
25003-5284
21086-3371
21702-3371
21086-3372
24600-3373
21086-3374
25001-4780
25003-0803
25003-1300
25003-9245
25003-2560
25003-5057
25003-9099
24816-7014
25003-5661
21086-4490
25003-1393
25003-5119
25003-9703
25003-7726
25003-2890
25003-3376
29502-4309
25003-1706
29516-7074
25003-4490
29502-5712
24063-2281
24600-3326
24620-3352
25003-1269
24700-3352
25003-6982
25003-7634
25003-9232
25003-3375
25058-3375
21086-3375
21702-3375
24600-3377
21086-3377
24620-3377
29500-4310
29502-4310
25003-4424
25003-3378
21086-3378
25003-3380
25058-3380
21086-3380

SHAFT

BORE

WIDTH

6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.125
6.187
6.187
6.187
6.187
6.187
6.187
6.188
6.188
6.188
6.218
6.221
6.229
6.229
6.247
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250

7.375
7.375
7.375
7.375
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
9.000
7.187
7.250
7.437
7.437
7.500
7.508
7.188
7.500
7.688
8.062
7.250
7.480
7.549
7.188
7.125
7.185
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.343

0.500
0.500
0.625
0.625
0.500
0.500
0.750
0.750
0.906
0.906
0.969
0.969
0.500
0.500
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.750
1.438
0.500
0.500
0.500
0.625
0.625
0.250
0.750
0.625
0.750
0.750
0.500
0.511
0.625
0.375
0.625
0.500
0.375
0.437
0.437
0.438
0.500
0.500
0.500
0.625
0.750
0.750
0.906
0.969
1.187

MODEL NO. PART NO.

23
53
23
53
53
62
23
53
53R1
53R2
53F1
53TF
24
62
23
26
53
64
23
25
53
IG
26
23
23
23
23
76
26
IG
23
26
IG
23
23
26
23
EQ
23
23
23
61
26
23
53
26R1
23
IG
IG
53R1
53T2
IGSPB

25003-3381
21086-3381
25003-3383
21086-3383
21086-3384
21702-3384
25003-3387
21086-3387
22537-6146
22627-6146
22987-5884
22994-5884
25005-8169
21702-8169
25003-6602
24600-3418
21086-6602
21238-1299
25003-4729
25058-4729
21086-4729
29502-5583
24600-3422
25003-7789
25003-5563
25003-7719
25003-8654
26193-7472
24600-4388
29502-4311
25003-7472
24600-3390
29502-5524
25003-1004
25003-7816
24600-6867
25003-1286
24802-1764
25003-4551
25003-0527
25003-6450
24060-6450
24600-6450
25003-3388
21086-3388
24620-0678
25003-3390
29500-4312
29502-4312
22537-7330
22897-7864
29516-7073

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-79

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.250
6.281
6.281
6.281
6.298
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.300
6.300

7.375
7.375
7.375
7.375
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.625
7.625
7.687
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.281
7.299
7.530
7.500
7.244
7.274
7.283
7.299
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.549
7.677
7.677
7.874
7.874
7.874
7.480
7.781

0.500
0.500
0.562
0.625
0.500
0.500
0.500
0.562
0.562
0.625
0.625
0.750
0.750
1.344
0.500
0.500
0.625
0.500
0.500
0.625
0.719
0.750
0.750
0.750
0.750
0.750
0.906
1.344
0.375
0.375
0.625
0.375
0.551
0.750
0.394
0.500
0.500
0.591
0.591
0.591
0.591
0.625
0.629
0.630
0.625
0.709
0.709
0.472
0.551
0.630
0.295
0.500

Garlock

MODEL NO. PART NO.

23
53
23
23
23
53
62
23
53
23
53
53
IG
53R1
23
53
23
23
53
23
53F1
23
25
53
62
IG
53R2
53R2
23
23
23
23
23
23
92
23
23
23
26
53
26R1
EQ
23
26
23
53
26R1
23
59
21
26
23

25003-3391
21086-3391
25003-1609
25003-1457
25003-3394
21086-3394
21702-3394
25003-3395
21086-3395
25003-3396
21086-3396
21086-3397
29500-4865
22537-4991
25003-3398
21086-3398
25003-7264
25003-3402
21086-3402
25003-3404
22987-5212
25003-3405
25058-3405
21086-3405
21702-3405
29502-3405
22627-7247
22627-7629
25003-6922
25003-9630
25003-5637
25003-1391
25003-1394
25003-3269
27063-0876
25003-9789
25003-4634
25003-7276
24600-7276
21086-7276
24620-7276
24801-3913
25003-3913
24600-3913
25003-6867
21086-8619
24620-1035
25003-1717
24700-4038
25001-4633
24600-3404
25003-5628

SHAFT

BORE

WIDTH

6.312
6.312
6.313
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.375
6.430
6.430
6.437
6.437
6.437
6.437
6.437
6.437
6.437
6.437
6.437
6.437
6.437
6.437
6.438
6.438
6.438
6.438
6.438
6.438
6.438

7.312
7.312
7.313
7.250
7.375
7.375
7.375
7.375
7.498
7.498
7.500
7.500
7.500
7.500
7.500
7.625
7.625
7.625
7.625
7.687
7.750
7.750
7.750
7.750
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.500
7.500
7.375
7.437
7.500
7.500
7.687
7.687
7.687
7.687
7.750
7.780
7.937
7.937
7.438
7.500
7.500
7.687
7.708
7.750
7.780

0.500
0.625
0.750
0.500
0.375
0.500
0.500
0.750
0.750
0.750
0.500
0.500
0.500
0.625
0.969
0.500
0.500
0.625
0.625
0.625
0.472
0.500
0.500
0.625
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.625
0.750
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.750
1.375
0.625
0.750
0.750
0.500
0.625
0.750
0.625
0.750
1.187

MODEL NO. PART NO.

23
23
IG
23
23
23
53
IG
IG
IG
23
53
94
23
53T2
23
53
23
53
23
24
23
53
23
23
53
23
26
53
23
53
IG
IG
23
23
53
62
23
26
59
EQ
53
EQSPB
23
23
IG
23
23
IG
23
23
IGSPB

25003-8194
25003-7597
29502-4313
25003-2269
25003-9939
25003-3406
21086-3406
29502-4314
29500-4542
29502-4542
25003-3409
21086-3409
27223-3409
25003-3419
22897-7609
25003-3413
21086-3413
25003-3415
21086-3415
25003-5195
25005-9933
25003-3417
21086-3417
25003-4694
25003-3421
21086-3421
25003-3423
24600-3423
21086-3423
25003-3424
21086-3424
29519-5741
29502-5702
25003-9185
25003-7321
21086-3917
21702-3917
25003-7924
24600-3424
24700-3424
24802-3424
21086-3425
24816-7043
25003-9823
25003-9021
29502-4315
25003-3917
25003-4595
29502-5094
25003-4445
25003-3425
29516-7104

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-80

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

6.440
6.494
6.442
6.495
6.496
6.496
6.498
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500

7.969
7.525
7.500
7.525
7.480
7.874
9.125
7.250
7.375
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.625
7.625
7.687
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.874
7.874
7.875
7.875
7.875
7.937
8.000
8.000
8.000

0.750
0.517
0.625
0.500
0.512
0.591
0.750
0.500
0.500
0.250
0.375
0.437
0.500
0.500
0.500
0.500
0.500
0.562
0.562
0.562
0.625
0.625
0.625
0.625
0.625
0.750
0.781
0.844
0.906
0.906
1.031
1.218
0.625
0.625
0.625
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.472
0.472
0.625
0.625
0.750
0.625
0.500
0.500
0.500

MODEL NO. PART NO.

23
26
IG
23
58
23
IG
61
23
61
23
23
23
25
62
113
EQ
23
26
53
23
53
59
62
IG
IG
53F1
53F1
53R2
53T2
53T2
53T2
23
53
23
23
53
23
25
26
53
EQ
23
23
24
23
53
23
23
23
24
26R1

25003-1702
24600-1060
29519-5655
25003-0795
21003-0584
25003-1970
29502-5810
24060-1686
25003-3168
24060-1687
25003-1832
25003-9374
25003-4560
25058-4560
21702-4560
21012-4560
24801-0682
25003-9780
24600-9780
21086-9780
25003-3426
21086-3426
24700-3426
21702-3426
29519-3426
29502-4316
22987-8149
22987-6920
22627-5531
22897-5531
22897-7174
22897-5286
25003-3428
21086-3428
25003-7771
25003-6817
21086-6817
25003-3430
25058-3430
24600-3430
21086-3430
24801-3430
25003-3431
25003-8171
25005-8171
25003-3432
21086-3432
25003-9217
25003-5792
25003-6370
25005-6370
24620-6370

SHAFT

BORE

WIDTH

6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.500
6.562
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.625
6.670
6.679
6.687
6.687

8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.125
8.500
7.562
7.625
7.625
7.625
7.625
7.718
7.718
7.725
7.750
7.750
7.750
7.875
7.875
7.875
7.875
8.000
8.000
8.000
8.000
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.250
8.250
8.375
8.375
8.390
8.500
8.750
8.750
12.500
7.750
7.405
7.687
7.750

0.563
0.625
0.625
0.625
0.625
0.750
0.750
0.750
0.844
1.000
0.625
0.585
0.500
0.500
0.625
0.625
0.750
1.116
1.250
0.305
0.625
0.625
0.625
0.500
0.625
0.625
0.625
0.500
0.625
0.625
0.844
0.500
0.500
0.625
0.625
0.687
0.750
0.750
0.969
0.625
0.750
0.500
0.625
1.375
0.625
0.500
0.625
0.625
0.500
0.250
0.500
0.625

MODEL NO. PART NO.

26R1
23
53
26R1
62
23
26
53
53F1
EQ
53
21
23
23
23
53
IG
IGSPB
EQSPB
26
23
25
53
53
23
53
62
23
23
53
53F1
23
24
23
53
23
23
53
53R2
53
53
23
53
EQSPB
53
26
53
54
23
26
23
53

24620-3348
25003-3434
21086-3434
24620-3434
21702-3434
25003-3435
24600-3435
21086-3435
22987-5211
24802-1185
21086-6501
25001-5410
25003-6371
25003-6897
25003-3436
21086-3436
29500-5522
29516-7127
24816-7054
24600-3438
25003-3438
25058-3438
21086-3438
21086-5677
25003-3440
21086-3440
21702-3440
25003-8567
25003-3442
21086-3442
22987-6051
25003-5139
25005-5139
25003-3444
21086-3444
25003-6172
25003-3445
21086-3445
22627-8775
21086-3446
21086-3447
25003-5691
21086-3448
24816-7039
21086-3450
24600-3135
21086-3454
21140-6023
25003-9958
24600-2940
25003-6229
21086-3918

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-81

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

6.687
6.687
6.688
6.690
6.692
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.693
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750

7.937
8.007
7.937
7.940
8.192
7.638
7.677
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.875
7.943
7.992
8.193
8.268
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.875
7.875
7.875
7.875
7.875
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.125
8.125
8.125
8.125
8.250
8.250
8.250
8.250

0.500
0.625
0.625
0.625
0.750
0.551
0.492
0.295
0.472
0.492
0.590
0.591
0.591
0.625
0.630
0.630
0.590
0.625
0.547
0.500
0.630
0.438
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.375
0.500
0.625
0.625
0.625
0.375
0.625
0.625
0.625
0.719
0.750
0.750
0.844
0.625
0.625
0.625
0.750
0.500
0.562
0.625
0.625

Garlock

MODEL NO. PART NO.

23
23
23
23
23
23
23
26
23
23
26R1
23
53
EQ
26
59
59
23
23
24
26
23
21
23
25
26
23
53
62
59
IG
23
23
23
53
62
23
23
26
53
53F1
IG
IG
53F1
23
53
IG
IG
23
59
23
25

25003-5032
25003-9828
25003-7882
25003-6818
25003-8445
25003-1395
25003-0637
24600-3451
25003-2826
25003-5356
24620-3919
25003-7268
21086-7268
24802-3180
24600-3919
24700-3919
24700-7268
25003-8699
25003-5370
25005-9951
24600-3329
25003-3455
25001-6372
25003-6372
25058-6372
24600-6372
25003-3456
21086-3456
21702-3456
24700-5287
29502-5287
25003-3459
25003-6890
25003-3458
21086-3458
21702-3458
25003-2983
25003-3460
24600-3460
21086-3460
22987-7436
29500-3467
29502-3467
22987-8216
25003-3462
21086-3462
29519-3462
29500-3462
25003-9404
24700-0844
25003-3464
25058-3464

SHAFT

BORE

WIDTH

6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.750
6.781
6.812
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875
6.875

8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.375
8.500
8.500
8.500
8.500
8.625
8.750
8.750
9.062
8.031
8.312
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
8.000
8.000
8.000
8.000
8.000
8.062
8.125
8.125
8.125
8.125
8.125
8.125
8.250
8.250
8.250
8.250
8.250
8.250
8.375
8.375
8.375
8.375

0.625
0.625
0.625
0.750
0.750
0.750
0.750
0.781
1.031
1.032
1.156
0.625
0.500
0.625
0.625
1.219
0.625
0.625
0.875
0.750
0.625
0.750
0.375
0.438
0.500
0.625
0.625
0.625
0.750
0.969
0.437
0.500
0.625
0.625
1.219
0.563
0.500
0.562
0.625
0.625
1.406
1.406
0.625
0.625
0.625
0.625
0.750
1.406
0.625
0.625
0.750
0.750

MODEL NO. PART NO.

53
59
EQ
23
53
IG
IG
53F1
53R2
53R1
53R1
53
23
21
53
53T2
53
53
EQ
21
23
23
23
23
23
53
58
62
IG
53F1
23
23
23
53
53T2
23
23
23
23
53
53R2
53T2
23
25
53
62
23
53T2
23
53
23
53

21086-3464
24700-3464
24801-3464
25003-3465
21086-3465
29500-3465
29502-3465
22987-7572
22627-6945
22537-6945
22537-9664
21086-3466
25003-3241
25001-3468
21086-3468
22897-9168
21086-3470
21086-3472
24802-4607
25001-7622
25003-7063
25003-4900
25003-1127
25003-3477
25003-8433
21086-3474
21003-3474
21702-3474
29502-5565
22987-4853
25003-6199
25003-6951
25003-3476
21086-3476
22897-7777
25003-3216
25003-7274
25003-8134
25003-3478
21086-3478
22627-8685
22897-8685
25003-3480
25058-3480
21086-3480
21702-3480
25003-3481
22897-6526
25003-3482
21086-3482
25003-3483
21086-3483

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-82

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

6.875
6.875
6.875
6.875
6.875
6.875
6.889
6.889
6.889
6.889
6.889
6.890
6.890
6.906
6.937
6.937
6.937
6.937
6.937
6.937
6.937
6.937
6.937
6.937
6.938
6.938
6.938
6.938
6.938
6.950
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000

8.375
8.384
8.500
8.500
8.500
8.750
7.874
7.874
7.874
7.889
8.465
8.071
8.465
8.156
7.937
8.000
8.062
8.125
8.125
8.375
8.437
8.500
8.500
9.000
8.000
8.125
8.375
8.383
8.383
8.125
7.875
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.125
8.125
8.125
8.125
8.125

1.156
0.625
0.625
0.750
0.750
0.625
0.472
0.500
0.591
0.500
0.629
0.591
0.625
0.625
0.500
0.625
0.500
0.625
0.750
0.625
0.500
0.625
0.625
0.500
0.625
0.625
0.625
1.249
1.312
0.750
0.375
0.375
0.437
0.438
0.500
0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.844
0.844
0.625
0.625
0.625
0.750
0.750

MODEL NO. PART NO.

53R1
26
53
25
53
53
23
23
23
23
53
23
23
23
23
23
23
53
23
53
23
23
53
94
26
23
23
IGSPB
IGSPB
23
23
23
26
23
23
25
26R1
61
61
23
26
53
59
62
IG
53F1
53R1
23
26
53
23
53

22537-7796
24600-3486
21086-3484
25058-3485
21086-3485
21086-3488
25003-1709
25003-3251
25003-4624
25003-1869
21086-7495
25003-2457
25003-1388
25003-6597
25003-6373
25003-5731
25003-6258
21086-4477
25003-3490
21086-4478
25003-7378
25003-4479
21086-4479
27223-9047
24600-3511
25003-4477
25003-4478
29516-7107
29516-7109
25003-4730
25003-1017
25003-3257
24600-3452
25003-3502
25003-6374
25058-6374
24620-6374
24060-6374
24064-6374
25003-3492
24600-3492
21086-3492
24700-3492
21702-3492
29502-3453
22987-6433
22537-6433
25003-3494
24600-3494
21086-3494
25003-3495
21086-3495

SHAFT

BORE

WIDTH

7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.000
7.007
7.010
7.059
7.062
7.062
7.062
7.062
7.062
7.078
7.078
7.086
7.086
7.086
7.086
7.086
7.086
7.086

8.187
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.383
8.406
8.450
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.750
13.500
8.582
8.510
8.249
8.062
8.062
8.562
8.562
8.562
8.562
8.578
8.086
8.267
8.267
8.267
8.385
8.500
8.586

0.625
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.500
0.625
0.625
0.688
0.750
0.750
1.375
1.062
0.588
0.562
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.750
0.750
0.875
0.969
0.969
0.625
0.750
0.629
0.500
0.625
0.500
0.625
0.500
0.500
0.750
0.500
0.625
0.500
0.492
0.590
0.591
0.547
0.625
0.750

MODEL NO. PART NO.

23
23
23
25
53
23
25
IG
23
23
53
23
23
58
EQSPB
IGSPB
23
23
23
24
25
23
25
26
53
59
23
25
53
IG
53R2
53F1
53R2
53
54
26
23
23
23
23
23
24
23
23
23
23
23
26R1
23
23
23
23

25003-3094
25003-4924
25003-3496
25058-3496
21086-3496
25003-3497
25058-3497
29502-3497
25003-6163
25003-3498
21086-3498
25003-4774
25003-3499
21003-3499
24816-7015
29516-7075
25003-8434
25003-0983
25003-6375
25005-6375
25058-6375
25003-3500
25058-3500
24600-3500
21086-3500
24700-3500
25003-3501
25058-3501
21086-3501
29500-3501
22627-7360
22987-6437
22627-6437
21086-3504
21140-6024
24600-4227
25003-2064
25003-3109
25003-7674
25003-9262
25003-9244
25005-9244
25003-9805
25003-5629
25003-6841
25003-4826
25003-5336
24620-3920
25003-7807
25003-5371
25003-4449
25003-9858

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-83

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

7.087
7.087
7.087
7.087
7.087
7.087
7.087
7.087
7.087
7.087
7.087
7.087
7.090
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.125
7.187
7.187
7.187
7.187
7.187
7.188
7.188
7.188

7.874
7.961
8.071
8.071
8.267
8.268
8.268
8.268
8.268
8.268
8.465
8.661
8.334
8.000
8.125
8.125
8.125
8.125
8.125
8.250
8.250
8.250
8.250
8.250
8.375
8.375
8.375
8.500
8.500
8.500
8.500
8.500
8.500
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.750
8.750
8.187
8.437
8.562
8.639
8.686
8.437
8.438
8.570

0.591
0.472
0.512
0.625
0.591
0.472
0.591
0.591
0.630
0.630
0.625
0.625
0.500
0.375
0.500
0.500
0.500
0.625
0.625
0.469
0.500
0.625
0.625
0.969
0.500
0.625
0.625
0.500
0.625
0.625
0.625
0.625
1.094
0.437
0.500
0.625
0.750
0.750
0.750
0.750
0.750
1.094
0.625
0.750
0.500
0.500
0.625
0.625
0.625
0.625
0.500
0.980

Garlock

MODEL NO. PART NO.

26
23
23
IG
53
23
61
61
23
26
EQ
23
23
61
23
53
113
23
53
23
23
23
53
53T2
61
23
53
61
23
26
53
59
53R2
23
24
53
23
25
53
26R1
58
53R1
53
25
23
23
23
23
23
23
61
EQSPB

24600-5919
25003-1433
25003-1616
29519-5783
21086-7807
25003-2828
24060-7807
24064-7807
25003-3920
24600-3920
24802-5625
25003-9994
25003-0856
24060-1724
25003-4561
21086-4561
21012-4561
25003-3506
21086-3506
25003-6402
25003-7740
25003-3508
21086-3508
22897-6691
24060-2404
25003-3510
21086-3510
24060-1731
25003-3512
24600-3512
21086-3512
24700-3512
22627-8667
25003-1464
25005-8173
21086-3514
25003-3515
25058-3515
21086-3515
24620-3515
21003-3515
22537-6089
21086-3516
25058-3526
25003-7812
25003-1734
25003-4886
25003-8580
25003-7811
25003-3521
24060-1734
24816-7132

SHAFT

BORE

WIDTH

7.188
7.207
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.250
7.256
7.283
7.283

8.640
8.225
7.625
8.000
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.375
8.375
8.437
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.625
8.625
8.625
8.702
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
9.000
8.756
8.268
8.283

0.625
0.500
0.625
0.312
0.375
0.437
0.438
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.750
1.156
1.219
1.344
0.625
1.125
0.590
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.750
1.094
0.625
0.625
0.750
0.609
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.875
0.500
0.500
0.500
0.500

MODEL NO. PART NO.

26
23
IG
71
23
23
26
23
25
23
53
26R1
62
EQ
53
53R1
53T2
53R2
53
53R2
23
23
25
61
23
25
26
53
62
87
88
88NS
21
23
53
53R2
23
53
23
23
23
23
53
EQ
23
53
59
58
61
23
23
23

24600-5273
25003-9956
29507-5724
26001-9565
25003-6861
25003-6175
24600-6175
25003-6376
25058-6376
25003-3518
21086-3518
24620-3518
21702-3518
24801-3518
21086-3519
22537-9087
22897-7920
22627-5500
21086-3520
22627-7707
25003-6556
25003-6377
25058-6377
24060-6377
25003-3522
25058-3522
24600-3522
21086-3522
21702-3522
26080-3522
26088-3522
26188-3522
25001-3523
25003-3523
21086-3523
22627-8546
25003-3524
21086-3524
25003-3525
25003-1868
25003-6251
25003-3526
21086-3526
24802-1239
25003-3527
21086-3527
24700-3527
21003-2692
24060-1739
25003-2065
25003-0801
25003-2081

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-84

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

7.283
7.283
7.312
7.312
7.312
7.313
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.375
7.402
7.437
7.437
7.437
7.437
7.437
7.437
7.437
7.438
7.440
7.441
7.468
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.480

8.464
8.850
8.375
8.375
8.437
8.438
8.250
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.500
8.500
8.500
8.625
8.625
8.625
8.625
8.750
8.875
8.875
8.875
8.875
9.000
9.000
9.125
9.250
8.583
8.437
8.500
8.687
8.937
8.945
8.945
8.945
8.500
8.858
9.875
8.468
8.425
8.464
8.465
8.480
8.661
8.661
8.661
8.661

0.590
0.625
0.625
0.625
0.562
0.563
0.438
0.437
0.437
0.500
0.500
0.625
0.625
0.637
0.637
0.750
0.500
0.625
0.625
0.625
0.625
0.750
0.750
0.625
0.625
0.625
0.625
0.750
0.625
0.625
0.625
0.625
0.591
0.500
0.625
0.625
0.750
1.115
1.375
1.540
0.500
0.629
0.512
0.688
0.472
0.629
0.500
0.500
0.472
0.492
0.591
0.591

MODEL NO. PART NO.

23
59
53
62
53
26
23
23
26
23
25
23
53
88
88NS
53
23
23
53
23
53
23
IG
53
23
53
62
23
23
53
53
53
26
23
23
23
23
IGSPB
EQSPB
EQSPB
23
26R1
26
59
23
26
23
23
23
23
23
53

25003-2643
24700-0001
21086-4492
21702-4492
21086-6888
24600-1714
25003-0953
25003-6182
24600-6182
25003-4921
25058-4921
25003-3528
21086-3528
26088-9126
26188-9126
21086-3529
25003-1308
25003-3530
21086-3530
25003-3532
21086-3532
25003-3533
29502-5746
21086-3534
25003-3536
21086-3536
21702-3536
25003-3537
25003-3538
21086-3538
21086-3540
21086-3542
24600-2145
25003-7847
25003-7443
25003-9846
25003-9792
29516-7146
24816-7111
24816-7120
25003-1965
24620-3923
24600-1716
24700-5324
25003-1290
24600-4997
25003-2581
25003-2679
25003-0504
25003-5333
25003-8049
21086-8049

SHAFT

BORE

WIDTH

7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.480
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500
7.500

8.661
8.661
8.661
8.661
8.677
8.729
8.858
8.858
8.980
9.055
9.250
8.375
8.464
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.625
8.625
8.750
8.750
8.750
8.750
8.875
8.875
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.125
9.125
9.125

0.591
0.591
0.630
0.750
0.500
0.625
0.629
0.630
0.750
0.630
0.630
0.500
0.625
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.750
1.094
0.625
0.625
0.500
0.625
0.625
0.625
0.500
0.625
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.718
0.750
0.750
0.750
0.750
0.750
0.844
1.343
0.625
0.625
0.750

MODEL NO. PART NO.

59
61
23
IG
23
23
23
26R1
23
23
26
23
53
21
23
61
23
26
53
59
62
142
53R1
23
53
23
23
53
59
23
53
23
24
23
25
26
53
59
62
EQ
IG
53F1
23
26
53
IG
IG
53F1
53R1
23
53
21

24700-2043
24060-8049
25003-1379
29500-4756
25003-2866
25003-1690
25003-3911
24620-1036
25003-1316
25003-1214
24600-3758
25003-8252
21086-5115
25001-6378
25003-6378
24060-6378
25003-3544
24600-3544
21086-3544
24700-3544
21702-3544
21432-3545
22537-8384
25003-3546
21086-3546
25003-7180
25003-3548
21086-3548
24700-3548
25003-4889
21086-3550
25003-6773
25005-6773
25003-3552
25058-3552
24600-3552
21086-3552
24700-3552
21702-3552
24802-3552
29519-3552
22987-9584
25003-3553
24600-3553
21086-3553
29500-3553
29502-3553
22987-7233
22537-6564
25003-3554
21086-3554
25001-3555

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-85

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

7.500
7.500
7.500
7.500
7.500
7.500
7.519
7.530
7.562
7.562
7.600
7.620
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.625
7.667
7.677
7.687
7.716
7.725
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750

9.125
9.250
9.250
9.250
9.250
9.250
9.019
8.780
9.062
9.065
8.894
9.120
8.500
8.625
8.625
8.625
8.625
8.750
8.750
8.875
8.875
9.000
9.000
9.000
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.188
9.250
9.055
9.055
9.187
8.661
9.375
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.812
8.875
8.875

0.750
0.625
0.750
0.937
1.218
1.344
0.750
0.625
0.750
0.750
0.750
0.750
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.625
0.625
0.591
0.591
0.750
0.472
0.750
0.437
0.437
0.438
0.438
0.500
0.625
0.625
0.625
1.094
1.156
0.500
0.625
0.750

Garlock

MODEL NO. PART NO.

53
53
21
53F1
53R2
53R2
23
23
23
23
23
23
23
23
23
53
62
53
59
23
53
23
53
53
24
23
25
26
53
87
23
53
23
53
23
59
23
23
21
23
26
88
88NS
23
23
53
59
53R2
53R2
23
53
23

21086-3555
21086-3556
25001-3557
22987-5234
22627-6596
22627-4942
25003-9065
25003-5638
25003-5241
25003-5578
25003-2688
25003-9895
25003-2106
25003-7367
25003-3558
21086-3558
21702-3558
21086-3560
24700-2992
25003-3562
21086-3562
25003-3564
21086-3564
21086-3565
25005-5630
25003-3566
25058-3566
24600-3566
21086-3566
26080-3566
25003-3567
21086-3567
25003-2614
21086-3568
25003-7320
24700-2183
25003-9340
25003-0980
25001-7912
25003-6185
24600-6185
26088-6185
26188-6185
25003-6379
25003-3570
21086-3570
24700-1895
22627-8686
22627-6954
25003-3217
21086-3572
25003-3573

SHAFT

BORE

WIDTH

7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.750
7.760
7.800
7.812
7.812
7.812
7.812
7.812
7.812
7.854
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874
7.874

8.938
9.000
9.000
9.000
9.000
9.125
9.125
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
10.250
8.875
8.800
8.812
8.812
9.000
9.062
9.250
9.312
8.854
8.816
8.858
8.874
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.252
9.374
9.448
9.448
9.448
9.449
9.875

0.625
0.500
0.625
0.625
0.750
0.625
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.844
0.875
0.969
0.500
0.500
0.500
0.438
0.500
0.625
0.625
0.500
0.750
0.500
0.500
0.591
0.750
0.492
0.500
0.551
0.551
0.551
0.590
0.591
0.591
0.591
0.591
0.591
0.591
0.630
0.625
0.752
0.618
0.629
0.787
0.787
0.625

MODEL NO. PART NO.

23
23
23
53
23
23
53
24
23
25
26
53
59
62
23
53
53F1
53R2
53T2
26
23
23
23
23
23
23
23
23
23
23
23
IG
23
53
23
26
26R1
26R1
23
53
58
59
61
61
59
26
23
23
23
26R1
26
21

25003-7744
25003-6759
25003-3574
21086-3574
25003-2391
25003-3576
21086-3576
25005-9798
25003-3578
25058-3578
24600-3578
21086-3578
24700-3578
21702-3578
25003-3579
21086-3579
22987-7241
22627-7358
22897-4876
24600-3136
25003-4833
25003-1152
25003-3581
25003-8578
25003-1288
25003-9861
25003-2156
25003-6016
25003-4990
25003-4860
25003-1949
29500-5158
25003-5337
21086-4834
25003-3914
24600-3914
24620-3914
24620-7388
25003-7388
21086-7388
21003-7388
24700-7388
24060-7388
24064-7388
24700-5317
24600-3908
25003-2500
25003-5372
25003-8420
24620-3916
24600-3916
25001-6973

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-86

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

7.874
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.875
7.937
7.937
7.937
7.937
7.937
7.937
7.937
7.937
7.937
7.938
7.938
7.960
7.971

9.875
8.875
8.875
8.875
8.875
8.875
8.937
9.000
9.000
9.000
9.000
9.056
9.125
9.125
9.125
9.125
9.125
9.125
9.250
9.250
9.250
9.250
9.281
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.500
9.500
8.937
8.937
9.000
9.125
9.125
9.187
9.250
9.437
10.125
8.875
9.125
9.460
9.000

0.625
0.375
0.500
0.625
0.625
0.625
0.500
0.438
0.500
0.625
0.625
0.375
0.375
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.500
0.625
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.969
0.969
1.141
0.625
0.750
0.500
0.750
0.500
0.625
0.625
0.625
0.625
0.750
0.500
0.500
0.969
0.625
0.375

MODEL NO. PART NO.

23
23
23
23
53
66
23
26
23
53
66
23
23
23
23
25
53
66
23
53
66
23
23
24
23
53
59
66
EQ
64
23
26
53
IG
53R2
53T2
53T2
23
21
23
142
23
23
53
23
23
23
94
23
53F1
23
23

25003-6973
25003-5605
25003-6492
25003-3580
21086-3580
21527-3580
25003-5789
24600-3811
25003-6844
21086-3582
21527-3582
25003-6000
25003-7108
25003-6647
25003-3584
25058-3584
21086-3584
21527-3584
25003-3586
21086-3586
21527-3586
25003-3587
25003-6926
25005-9934
25003-3588
21086-3588
24700-3588
21527-3588
24801-3588
21238-9176
25003-3589
24600-3589
21086-3589
29500-3589
22627-5932
22897-5932
22897-9472
25003-1107
25001-9835
25003-7661
21432-4463
25003-1061
25003-3590
21086-3590
25003-9955
25003-2575
25003-7133
27223-9307
25003-4763
22987-4978
25003-5685
25003-3930

SHAFT

BORE

WIDTH

7.985
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000

9.000
8.875
8.875
8.875
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.125
9.125
9.125
9.125
9.125
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.375
9.375
9.375
9.375
9.438
9.450
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500

0.375
0.437
0.437
0.437
0.437
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.750
0.969
1.156
1.344
0.500
0.625
0.625
0.625
0.750
0.437
0.500
0.625
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.750
0.844
1.000
1.000
0.625
0.625
0.625
0.625
0.500
0.625
0.500
0.500
0.625
0.625
0.625
0.687
0.687
0.687
0.687
0.750
0.750

MODEL NO. PART NO.

23
23
26
76
23
23
24
25
23
26
53
62
53
53R2
53R1
53R2
23
23
26
53
23
23
23
23
25
53
59
61
EQ
23
53
IG
53F1
53R2
53T2
23
26
53
62
23
23
23
24
23
53
62
23
59
62
64
23
53

25003-3966
25003-9578
24600-1775
26193-9578
25003-4822
25003-6380
25005-6380
25058-6380
25003-3592
24600-3592
21086-3592
21702-3592
21086-3593
22627-9165
22537-8751
22627-5651
25003-7577
25003-3594
24600-3594
21086-3594
25003-3595
25003-3199
25003-6510
25003-3596
25058-3596
21086-3596
24700-3596
24060-3596
24801-3596
25003-3597
21086-3597
29502-9354
22987-6661
22627-5883
22897-5883
25003-3598
24600-3598
21086-3598
21702-3598
25003-9184
25003-1770
25003-7758
25005-7758
25003-3600
21086-3600
21702-3600
25003-3921
24700-3768
21702-3921
21238-3921
25003-3601
21086-3601

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-87

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.000
8.062
8.062
8.062
8.062
8.062
8.062
8.062
8.063
8.070
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.125
8.187
8.187
8.187
8.189
8.214
8.250
8.250
8.250

9.500
9.500
9.500
9.500
9.500
9.592
9.625
9.750
9.750
9.875
9.910
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
14.750
9.000
9.062
9.312
9.312
9.562
9.562
10.000
10.062
9.258
9.125
9.125
9.187
9.250
9.625
9.625
9.625
10.000
10.125
10.125
10.125
10.125
10.125
10.125
10.135
9.187
9.312
9.687
9.370
9.464
9.250
9.250
9.250

0.750
0.750
0.969
0.969
1.094
0.609
0.750
0.750
1.406
0.812
0.750
0.625
0.625
0.687
0.750
0.750
0.812
1.000
1.375
0.625
0.500
0.463
0.500
0.625
0.500
0.750
1.000
1.000
0.591
0.437
0.500
0.500
0.625
0.500
0.750
0.750
1.000
0.625
0.687
0.750
0.750
0.750
1.281
0.750
0.500
0.500
0.500
0.591
0.500
0.437
0.500
0.625

Garlock

MODEL NO. PART NO.

62
IG
53F1
53R1
53R1
23
53
53
53T2
21
21
59
62
53
21
53
21
53
53R2
54
23
23
23
23
26
23
62
59
26
23
23
23
23
24
23
53
53
59
64
21
53
62
53T2
59
23
23
23
26
23
23
23
23

21702-3601
29502-3601
22987-5260
22537-5260
22537-9485
25003-9520
21086-6381
21086-3922
22897-7370
25001-9418
25001-9756
24700-0002
21702-3003
21086-3924
25001-3925
21086-3925
25001-3926
21086-3602
22627-9970
21140-9750
25003-1295
25003-8805
25003-4810
25003-9874
24600-5192
25003-5009
21702-3927
24700-0003
24600-4611
25003-5384
25003-8175
25003-7869
25003-3298
25005-7861
25003-3928
21086-3928
21086-3603
24700-0004
21238-9712
25001-3932
21086-3932
21702-3932
22897-7786
24700-3816
25003-8418
25003-8234
25003-9473
24600-2147
25003-2598
25003-6204
25003-6382
25003-3604

SHAFT

BORE

WIDTH

8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.250
8.260
8.267
8.267
8.267
8.267
8.267
8.267
8.268
8.268
8.312
8.313
8.375
8.375
8.375
8.375
8.375
8.375

9.250
9.250
9.250
9.250
9.250
9.312
9.375
9.375
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.688
9.750
9.750
9.750
9.750
10.000
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.260
10.500
11.500
9.142
9.448
9.448
9.448
9.842
9.842
9.842
9.449
9.803
9.562
9.313
9.375
9.500
9.500
9.625
9.625
9.750

0.625
0.625
0.625
0.625
0.750
0.437
0.500
0.625
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.844
1.125
0.750
0.500
0.500
0.625
0.750
0.750
0.625
0.750
0.750
0.750
0.812
1.000
1.218
1.875
0.687
0.875
0.750
0.375
0.590
0.590
0.590
0.551
0.618
0.630
0.472
0.866
0.625
0.500
0.500
0.625
0.750
0.500
0.625
0.625

MODEL NO. PART NO.

26
53
59
62
142
23
23
53
23
21
23
26
53
59
23
87
53F1
53T2
23
23
24
23
23
59
59
21
26
59
64
53
53T2
53T2
87
59
59
23
23
26
26R1
53
21
21
23
26
23
23
23
23
23
23
23
23

24600-3817
21086-3604
24700-3817
21702-3604
21432-4483
25003-2970
25003-4760
21086-3605
25003-8451
25001-3606
25003-3606
24600-3606
21086-3606
24700-3606
25003-3818
26080-3818
22987-8729
22897-4545
25003-2647
25003-6247
25005-6247
25003-6684
25003-7157
24700-3819
24700-0005
25001-8967
24600-1068
24700-1068
21238-4499
21086-3607
22897-5179
22897-4681
26080-2268
24700-0006
24700-0007
25003-8265
25003-5338
24600-5338
24620-5338
21086-7887
25001-5373
25001-9521
25003-2833
24600-5231
25003-9889
25003-5161
25003-9548
25003-7344
25003-1721
25003-8776
25003-4893
25003-3007

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-88

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.375
8.376
8.394
8.406
8.437
8.437
8.437
8.437
8.437
8.438
8.438
8.464
8.464
8.464
8.464
8.465
8.465
8.469
8.469
8.469
8.470
8.471
8.500
8.500

9.750
9.750
9.750
9.750
9.750
9.750
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
10.000
10.375
10.375
10.375
10.375
10.375
10.375
10.500
9.565
9.394
9.406
9.687
9.937
9.937
10.000
10.000
9.563
10.000
9.339
9.448
9.645
9.646
9.764
9.845
9.968
9.968
9.968
9.500
9.850
9.375
9.500

0.625
0.750
0.750
0.750
0.750
1.156
0.375
0.500
0.500
0.625
0.625
0.625
0.687
0.687
0.687
0.688
0.750
0.750
0.750
0.750
1.156
0.500
0.750
0.750
0.750
0.812
1.000
1.250
0.875
0.750
0.500
0.500
0.625
0.500
0.750
0.625
1.000
0.500
0.625
0.437
0.500
0.590
0.492
0.590
0.645
0.500
0.500
0.750
0.500
0.630
0.500
0.500

MODEL NO. PART NO.

59
23
53
59
62
53R1
23
23
24
23
25
59
23
53
64
26
23
53
88
88NS
53R2
24
21
23
59
64
53
53F1
59
23
23
23
23
23
23
53
53R2
23
59
23
23
23
23
23
23
23
24
23
23
23
23
21

24700-0008
25003-3608
21086-3608
24700-3631
21702-3608
22537-9618
25003-2727
25003-8452
25005-8452
25003-4799
25058-4799
24700-0009
25003-3933
21086-3933
21238-3933
24600-3933
25003-3934
21086-3934
26088-3934
26188-3934
22627-5918
25005-9935
25001-9267
25003-9267
24700-0010
21238-4500
21086-3609
22987-4782
24700-0011
25003-1699
25003-5308
25003-5163
25003-7834
25003-1463
25003-1592
21086-4501
22627-9532
25003-0999
24700-4501
25003-3112
25003-5402
25003-5358
25003-1953
25003-0961
25003-0746
25003-8623
25005-8623
25003-8189
25003-5461
25003-2976
25003-8583
25001-6383

SHAFT

BORE

WIDTH

8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500

9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.875
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.062
10.250
10.375
10.410
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500

0.500
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.969
0.969
1.094
1.312
0.500
0.562
0.625
0.625
0.625
0.652
0.750
0.750
0.750
0.750
0.500
0.500
0.625
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.750
0.750
1.000
1.000
1.250
0.750
0.750
0.625
0.812
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.750

MODEL NO. PART NO.

23
61
88
88NS
23
26
53
59
62
53R2
53T2
53R1
53R1
23
64
21
23
26
64
23
25
26
23
23
24
23
25
53
59
62
64
21
23
26
53
61
62
53F1
53R1
53F1
23
23
23
23
21
23
23
25
59
21
23
26

25003-6383
24064-6383
26088-6383
26188-6383
25003-3935
24600-3935
21086-3935
24700-3935
21702-3935
22627-6969
22897-6969
22537-9299
22537-6140
25003-4922
21238-1705
25001-6384
25003-6384
24600-6384
21238-6384
25003-9207
25058-9207
24600-1913
25003-8709
25003-8665
25005-8665
25003-4502
25058-4502
21086-4502
24700-0012
21702-4502
21238-8453
25001-3937
25003-3937
24600-3937
21086-3937
24063-3937
21702-3937
22987-6760
22537-6760
22987-5681
25003-3117
25003-4727
25003-8223
25003-9718
25001-8560
25003-8560
25003-5916
25058-5916
24700-0013
25001-7101
25003-7101
24600-7101

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-89

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.500
8.530
8.540
8.560
8.562
8.562
8.611
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.661
8.661
8.661
8.661
8.661
8.661

10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.625
9.780
9.750
9.810
9.500
10.062
10.236
9.625
9.812
9.875
9.875
9.875
10.000
10.125
10.125
10.125
10.125
10.125
10.125
10.250
10.250
10.250
10.250
10.260
10.500
10.500
10.500
10.500
10.500
10.625
10.625
10.625
10.625
10.625
10.625
10.750
10.750
10.750
9.370
9.661
9.842
9.842
9.842
9.842

0.750
0.812
0.812
0.812
1.000
1.000
1.250
1.312
0.750
0.625
0.625
0.625
0.500
0.750
0.750
0.500
0.625
0.500
0.625
0.625
0.750
0.609
0.625
0.687
0.687
0.750
0.750
0.625
0.750
0.750
0.750
0.687
0.500
0.750
0.750
0.750
1.000
0.625
0.750
0.750
0.750
0.812
1.000
0.812
0.875
1.000
0.748
0.500
0.512
0.590
0.590
0.590

Garlock

MODEL NO. PART NO.

53
23
62
64
53
62
53R2
53R1
53
23
58
23
23
23
23
26
23
23
23
26
59
23
59
53
64
23
53
59
23
53
IG
64
26
21
53
59
53F1
59
23
26
53
23
53
64
59
53
23
23
23
23
53
26R1

21086-7101
25003-3938
21702-3938
21238-3938
21086-3610
21702-3610
22627-9414
22537-6770
21086-4587
25003-5684
21003-2490
25003-0570
25003-1090
25003-9022
25003-0957
24600-3825
25003-1095
25003-9210
25003-6570
24600-6570
24700-0014
25003-4444
24700-0015
21086-3939
21238-3939
25003-3940
21086-3940
24700-0016
25003-3941
21086-3941
29500-5808
21238-2736
24600-3828
25001-3943
21086-3943
24700-1741
22987-6520
24700-0017
25003-3611
24600-3611
21086-3611
25003-9203
21086-3945
21238-7718
24700-0018
21086-3612
25003-1014
25003-5598
25003-4757
25003-5357
21086-5357
24620-5357

SHAFT

BORE

WIDTH

8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.661
8.687
8.687
8.688
8.688
8.688
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750

9.842
9.842
9.843
9.843
9.843
9.911
9.911
9.912
10.228
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.819
9.937
9.938
9.687
9.938
10.625
9.750
9.750
9.764
9.875
9.875
9.875
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.312
10.375
10.375
10.500
10.500
10.500

0.594
0.630
0.472
0.591
0.630
0.500
0.625
0.625
0.625
0.511
0.591
0.625
0.630
0.630
0.787
0.866
0.866
0.950
0.625
0.750
0.500
0.500
0.750
0.500
0.562
0.375
0.625
0.687
0.750
0.515
0.625
0.625
0.625
0.625
0.625
0.625
1.000
0.500
0.500
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.625
0.750
0.750
0.687
0.750
0.750

MODEL NO. PART NO.

59
23
23
62
26
23
23
IG
59
53
23
59
21
23
23
26
26R1
59
23
23
23
23
23
23
26
23
23
23
23
23
23
26
53
59
88
88NS
53F1
23
24
23
59
53
62
64
23
53
23
23
53
64
23
53

24700-5357
25003-3942
25003-2829
21702-5357
24600-3942
25003-9242
25003-9243
29519-5750
24700-0020
21086-7840
25003-0891
24700-0019
25001-8606
25003-8606
25003-1392
24600-3944
24620-3944
24700-0021
25003-7804
25003-6210
25003-9146
25003-4413
25003-4518
25003-6827
24600-3829
25003-1694
25003-5890
25003-9559
25003-5480
25003-4981
25003-6386
24600-6386
21086-6386
24700-6386
26088-6386
26188-6386
22987-8182
25003-6845
25005-6845
25003-8142
24700-0022
21086-3946
21702-3946
21238-3946
25003-3947
21086-3947
25003-2615
25003-3948
21086-3948
21238-9911
25003-3949
21086-3949

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-90

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.750
8.780
8.800
8.812
8.812
8.812
8.858
8.858
8.858
8.858
8.859
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.875
8.937
8.937
8.937
8.937
8.937

10.500
10.500
10.500
10.625
10.625
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.875
10.780
9.500
9.812
10.312
10.312
9.842
9.858
10.433
11.016
10.359
9.875
10.125
10.125
10.125
10.125
10.125
10.125
10.250
10.375
10.375
10.500
10.625
10.750
10.875
10.875
10.875
10.875
10.875
11.000
9.937
9.968
10.000
10.187
10.443

0.750
0.750
0.812
0.750
0.750
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.812
1.000
1.375
1.375
0.812
0.750
0.625
0.500
0.500
0.750
0.492
0.500
0.630
0.906
0.750
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.500
0.750
0.750
0.812
0.750
0.750
0.750
0.812
0.812
1.000
0.875
0.500
0.500
0.500
0.625
1.562

MODEL NO. PART NO.

59
62
23
53
59
23
21
23
26
53
59
62
23
64
53
53R1
53R2
64
23
61
23
23
23
23
23
23
59
23
23
23
23
26
59
87
26
23
23
23
23
23
62
23
59
23
64
26
59
23
23
23
23
EQSPB

24700-0023
21702-3949
25003-1082
21086-3950
24700-0024
25003-0960
25001-3951
25003-3951
24600-3951
21086-3951
24700-3951
21702-3951
25003-3952
21238-3952
21086-3613
22537-8687
22627-8687
21238-2812
25003-5525
24060-3600
25003-6943
25003-6334
25003-7617
25003-8481
25003-4992
25003-2247
24700-0025
25003-5910
25003-6813
25003-3832
25003-5153
24600-3832
24700-3832
26080-3832
24600-1914
25003-2244
25003-8177
25003-7336
25003-5213
25003-5559
21702-9438
25003-6646
24700-6646
25003-3953
21238-3953
24600-3833
24700-0026
25003-9151
25003-6273
25003-6797
25003-6190
24816-7052

SHAFT

BORE

WIDTH

8.937
8.970
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000

10.500
10.500
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.032
10.062
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.187
10.250
10.250
10.250
10.250
10.250
10.375
10.375
10.375
10.375
10.375
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500

0.750
0.500
0.437
0.468
0.500
0.500
0.500
0.625
0.625
0.625
0.625
0.750
0.750
0.500
0.500
0.500
0.547
0.625
0.625
0.750
0.750
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.500
0.625
0.625
0.625
0.750
0.500
0.500
0.562
0.609
0.625
0.625
0.625
0.625
0.687
0.687
0.687
0.687
0.750
0.750
0.750
0.750
0.812
1.375
1.375

MODEL NO. PART NO.

23
23
23
26
21
23
25
23
53
59
62
53
142
23
23
23
23
23
53
23
53
59
59
23
25
53
59
53
24
23
53
59
53
23
26
23
23
23
53
59
62
53
59
62
64
23
25
26
53
21
53R1
53R2

25003-1235
25003-2721
25003-9201
24600-3834
25001-6387
25003-6387
25058-6387
25003-4503
21086-4503
24700-4503
21702-4503
21086-3615
21432-3615
25003-0579
25003-1019
25003-0985
25003-6423
25003-4504
21086-4504
25003-3616
21086-3616
24700-0027
24700-0028
25003-4505
25058-4505
21086-4505
24700-4505
21086-3617
25005-9108
25003-4506
21086-4506
24700-0029
21086-3618
25003-5952
24600-0809
25003-1963
25003-8494
25003-4507
21086-4507
24700-0030
21702-4507
21086-3954
24700-3150
21702-3954
21238-3954
25003-3619
25058-3619
24600-3619
21086-3619
25001-4929
22537-6521
22627-6521

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-91

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.000
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.055
9.062
9.062
9.062
9.062

10.500
10.625
10.625
10.625
10.625
10.625
10.672
10.750
10.750
10.750
10.875
10.875
10.910
10.910
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.054
11.250
10.039
10.180
10.180
10.230
10.236
10.236
10.236
10.551
10.590
10.591
10.621
10.629
10.630
10.630
10.630
10.866
11.024
11.024
10.062
10.062
10.062
10.500

1.437
0.625
0.625
0.625
0.625
0.750
0.750
0.750
0.750
1.375
0.750
0.750
0.812
0.838
0.625
0.625
0.750
0.750
0.750
0.750
0.750
0.812
0.812
1.000
1.000
1.250
1.375
1.375
0.750
0.875
0.500
0.494
0.625
0.590
0.590
0.591
0.591
0.750
0.866
0.866
0.629
0.551
0.591
0.630
0.630
0.684
0.625
0.630
0.375
0.500
0.500
0.750

Garlock

MODEL NO. PART NO.

53R2
23
53
59
62
23
23
23
53
53R2
23
53
23
21
23
59
21
23
26
53
87
23
64
53
62
53T2
53R1
53R2
59
59
23
23
23
23
26
59
87
23
26R1
26
59
59
59
23
59
23
59
23
23
21
23
23

22627-8828
25003-4508
21086-4508
24700-0031
21702-4508
25003-3620
25003-3160
25003-3621
21086-3621
22627-4943
25003-3622
21086-3622
25003-1165
25001-8564
25003-9948
24700-0032
25001-3623
25003-3623
24600-3623
21086-3623
26080-3623
25003-3955
21238-3955
21086-3624
21702-3624
22897-8462
22537-5949
22627-5949
24700-0033
24700-0034
25003-5403
25003-2485
25003-1109
25003-5334
24600-3955
24700-3955
26080-5334
25003-5784
24620-3956
24600-3956
24700-0035
24700-4035
24700-5814
25003-4885
24700-4763
25003-5374
24700-0036
25003-4865
25003-5575
25001-7322
25003-7322
25003-8838

SHAFT

BORE

WIDTH

9.062
9.062
9.062
9.062
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.125
9.134
9.156
9.187
9.187
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250

10.562
10.562
11.062
11.062
10.125
10.125
10.375
10.375
10.375
10.500
10.625
10.625
10.625
10.625
10.625
10.625
10.750
10.750
10.750
10.799
11.000
11.125
11.125
11.125
11.125
10.625
10.656
10.375
10.687
10.125
10.170
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.375
10.375
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.625
10.625
10.750

0.750
0.750
0.750
0.750
0.375
0.500
0.625
0.625
0.625
0.625
0.625
0.687
0.687
0.750
0.750
1.250
0.625
0.750
0.750
0.703
0.750
0.625
0.750
0.812
1.250
0.687
0.750
0.750
0.750
0.375
0.500
0.437
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.625
0.750
0.500
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.750
1.437
0.500

MODEL NO. PART NO.

23
113
21
23
23
23
23
26
59
23
59
53
64
23
53
53T2
59
23
53
23
53
59
23
64
53F1
64
23
59
23
23
23
23
23
25
23
53
26R1
53
142
23
53
23
23
26
53
26R1
59
25
53
23
53T2
23

25003-9553
21012-9553
25001-6092
25003-6092
25003-3195
25003-6756
25003-4803
24600-4803
24700-4803
25003-1876
24700-0037
21086-3957
21238-3957
25003-3958
21086-3958
22897-7823
24700-0038
25003-3959
21086-3959
25003-0466
21086-3961
24700-0039
25003-5745
21238-3962
22987-6726
21238-8765
25003-5126
24700-0040
25003-9295
25003-7640
25003-1430
25003-5320
25003-6676
25058-6676
25003-4509
21086-4509
24620-2976
21086-3628
21432-3628
25003-3255
21086-3629
25003-4724
25003-4511
24600-0041
21086-4511
24620-0041
24700-0041
25058-3630
21086-3630
25003-7831
22897-9103
25003-8179

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-92

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.250
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375
9.375

10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.875
11.000
11.000
11.000
11.000
11.000
11.000
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.375
11.500
10.375
10.375
10.375
10.375
10.625
10.625
10.625
10.875
10.875
11.000
11.000
11.000
11.250
11.375
11.375
11.375
11.375

0.625
0.625
0.656
0.687
0.687
0.750
0.750
1.375
1.375
0.750
0.625
0.750
0.750
0.750
1.375
1.375
0.562
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
1.000
1.000
1.375
1.375
0.875
0.875
0.437
0.500
0.750
1.000
0.500
0.625
0.625
0.750
0.750
0.625
0.750
0.750
0.750
0.625
0.750
0.812
0.812

MODEL NO. PART NO.

23
59
26
53
64
23
53
53R1
53R2
53
59
23
25
53
53R1
53R2
59
23
26R1
64
23
25
26
53
26R1
58
59
62
23
26
53
53R2
53T2
59
59
23
23
142
59
23
23
59
23
59
59
23
53
23
59
53
23
64

25003-6595
24700-0042
24600-3840
21086-3963
21238-3963
25003-3632
21086-3632
22537-5021
22627-5021
21086-3964
24700-0043
25003-3965
25058-3965
21086-3965
22537-6663
22627-6663
24700-4481
25003-9172
24620-9388
21238-9706
25003-3967
25058-3967
24600-0044
21086-3967
24620-0044
21003-3967
24700-0044
21702-3967
25003-9875
24600-3633
21086-3633
22627-7562
22897-7562
24700-0045
24700-0046
25003-5093
25003-0981
21432-8621
24700-0047
25003-9544
25003-6648
24700-0048
25003-3971
24700-0049
24700-1343
25003-3972
21086-3972
25003-2580
24700-0050
21086-3975
25003-4610
21238-4610

SHAFT

BORE

WIDTH

9.375
9.409
9.410
9.437
9.437
9.437
9.437
9.437
9.437
9.437
9.437
9.437
9.437
9.437
9.438
9.438
9.438
9.445
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.448
9.449
9.449
9.449
9.449
9.449
9.449
9.449
9.449
9.449
9.469
9.469
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500

11.375
10.909
10.410
10.437
10.500
10.500
10.500
10.625
10.625
10.625
10.625
10.687
10.750
10.937
10.625
11.500
11.500
10.633
10.433
10.448
10.629
10.629
10.629
10.948
11.023
11.023
11.023
11.024
11.024
11.259
11.417
11.417
12.598
10.630
10.630
10.630
10.827
10.827
11.024
11.024
11.024
11.811
10.625
10.625
10.500
10.500
10.500
10.500
10.500
10.500
10.625
10.625

1.000
0.625
0.750
0.500
0.625
0.625
0.750
0.625
0.625
0.750
0.750
0.625
0.625
0.750
0.750
0.875
1.000
0.500
0.492
0.500
0.590
0.590
0.590
0.750
0.500
0.629
0.629
0.748
0.787
0.684
0.630
0.748
0.984
0.591
0.594
0.630
0.630
0.709
0.591
0.748
0.748
0.984
0.625
0.625
0.437
0.438
0.500
0.625
0.625
1.000
0.500
0.625

MODEL NO. PART NO.

53
23
142
23
23
53
53
23
53
23
53
23
23
23
59
59
59
23
23
23
23
53
26R1
23
23
23
53
26R1
23
23
23
26R1
26
26
59
59
26
23
26
23
26
59
26
59
23
26
23
23
53
53F1
23
53

21086-3634
25003-0476
21432-8414
25003-8753
25003-3977
21086-3977
21086-3635
25003-7447
21086-7447
25003-3636
21086-3636
25003-8447
25003-0528
25003-9916
24700-0051
24700-0052
24700-5932
25003-9941
25003-7637
25003-6991
25003-5359
21086-5359
24620-5359
25003-5852
25003-1097
25003-7891
21086-7891
24620-3973
25003-9435
25003-5380
25003-3132
24620-3974
24600-0828
24600-5359
24700-5359
24700-0053
24600-3910
25003-1036
24600-2041
25003-3973
24600-3973
24700-0054
24600-2044
24700-2044
25003-6214
24600-3841
25003-6388
25003-3638
21086-3638
22987-8717
25003-6669
21086-3639

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-93

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.500
9.528
9.562
9.562

10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.875
10.937
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.125
11.125
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.375
11.375
11.437
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
10.709
10.812
11.062

0.500
0.562
0.625
0.625
0.625
0.625
1.375
1.375
0.750
0.750
0.500
0.625
0.625
0.625
0.625
0.688
0.750
0.750
0.750
0.625
0.625
0.625
0.625
0.625
0.750
0.750
0.750
1.375
0.625
0.625
0.625
0.500
0.578
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.812
0.812
0.812
0.812
1.000
1.000
1.000
1.250
1.312
0.591
0.625
0.625

Garlock

MODEL NO. PART NO.

23
64
23
26
53
59
53R2
53T2
23
23
23
21
23
53
59
26
21
23
25
53
59
26
53
59
23
53
64
53R2
23
53
23
23
23
23
26
53
59
23
21
23
21
23
62
64
26
53
62
53F1
53R1
26
23
23

25003-8783
21238-3145
25003-3640
24600-3640
21086-3640
24700-3640
22627-6942
22897-6942
25003-3105
25003-2530
25003-8388
25001-3642
25003-3642
21086-3642
24700-0055
24600-3842
25001-3979
25003-3979
25058-3979
21086-3643
24700-0056
24600-3644
21086-3644
24700-3644
25003-3981
21086-3981
21238-3981
22627-8909
25003-3645
21086-3645
25003-5463
25003-1910
25003-9536
25003-3646
24600-0055
21086-3646
24700-0057
25003-5960
25001-3983
25003-3983
25001-3984
25003-3984
21702-3984
21238-3984
24600-3648
21086-3648
21702-3648
22987-7909
22537-4925
24600-2149
25003-9888
25003-8846

SHAFT

BORE

WIDTH

9.563
9.563
9.620
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.625
9.642
9.645
9.646
9.687
9.719
9.724
9.725
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750

10.563
10.653
10.875
10.500
10.625
10.875
10.875
10.875
10.875
10.875
10.875
10.875
11.000
11.125
11.125
11.125
11.625
11.625
11.625
11.625
10.642
12.007
11.142
11.187
11.625
10.724
11.750
10.625
10.750
10.750
10.750
10.750
10.750
10.750
10.875
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.125
11.125
11.125
11.125
11.125
11.125
11.160
11.250

0.500
0.500
0.625
0.500
0.500
0.500
0.625
0.625
0.625
0.750
0.750
0.750
0.750
0.500
0.625
0.750
0.750
0.750
0.812
1.000
0.500
0.984
0.812
0.750
0.700
0.500
0.625
0.500
0.500
0.625
0.625
0.625
0.625
0.750
0.625
0.500
0.625
0.625
0.625
0.625
0.750
0.750
0.750
1.375
0.562
0.625
0.625
0.625
0.750
0.750
0.588
0.625

MODEL NO. PART NO.

23
23
59
23
23
23
23
26
53
23
53
59
23
23
23
23
21
23
23
53
23
26R1
23
23
59
23
59
23
23
23
53
59
62
53
53
23
23
26
53
59
23
25
53
53R1
64
23
53
59
26
53
23
23

25003-4823
25003-4460
24700-0058
25003-7835
25003-7889
25003-6664
25003-8313
24600-8313
21086-8313
25003-4512
21086-4512
24700-0059
25003-2343
25003-6682
25003-9300
25003-9260
25001-6389
25003-6389
25003-9594
21086-3649
25003-7764
24620-1837
25003-2256
25003-9253
24700-0060
25003-4989
24700-2189
25003-1072
25003-6067
25003-4513
21086-4513
24700-2914
21702-4513
21086-3650
21086-4514
25003-6390
25003-4515
24600-4515
21086-4515
24700-4515
25003-3652
25058-3652
21086-3652
22537-9713
21238-1692
25003-4516
21086-4516
24700-0061
24600-1922
21086-3653
25003-6201
25003-4517

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-94

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.750
9.774
9.842
9.842
9.842
9.842
9.842
9.842
9.843
9.843
9.843
9.843
9.843
9.843
9.843
9.844
9.844
9.844
9.844
9.859
9.868
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875
9.875

11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.375
11.500
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
12.000
11.024
11.023
11.023
11.417
11.467
11.653
11.842
10.843
11.024
11.024
11.024
11.220
11.342
11.417
10.844
11.020
11.343
11.409
10.859
11.368
10.875
10.875
11.375
11.375
11.375
11.375
11.500
11.500
11.875
11.875

0.625
0.625
0.625
0.687
0.688
0.750
0.750
0.750
1.000
1.000
0.750
0.750
0.625
0.625
0.687
0.750
0.750
0.750
0.750
1.000
1.000
0.875
0.500
0.590
0.590
0.590
0.750
0.684
0.750
0.750
0.591
0.591
0.650
0.630
0.748
0.630
0.500
0.500
0.812
0.625
0.500
0.750
0.500
0.500
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.969

MODEL NO. PART NO.

25
53
59
64
23
23
26
53
53F1
EQ
23
59
23
59
64
21
23
25
53
26
53
59
23
23
26R1
23
23
23
23
142
59
62
26
23
23
23
23
23
23
59
23
23
23
25
23
23
53
59
23
53
23
59

25058-4517
21086-4517
24700-0062
21238-3985
25003-3985
25003-3654
24600-3654
21086-3654
22987-5205
24802-1183
25003-1283
24700-0063
25003-9947
24700-0064
21238-9425
25001-3989
25003-3989
25058-3989
21086-3989
24600-3655
21086-3655
24700-0065
25003-9317
25003-5339
24620-5339
25003-4497
25003-5961
25003-5375
25003-1314
21432-8553
24700-5339
21702-5339
24600-4345
25003-1099
25003-1703
25003-8607
25003-9969
25003-9676
25003-6533
24700-0066
25003-4482
25003-9995
25003-7621
25058-7621
25003-1441
25003-3990
21086-3990
24700-0067
25003-3991
21086-3991
25003-5082
24700-3140

SHAFT

BORE

WIDTH

9.875
9.875
9.875
9.892
9.937
9.937
9.937
9.937
9.937
9.937
9.937
9.938
9.938
9.938
9.945
9.947
9.947
9.960
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000

11.875
11.875
12.000
11.338
10.937
11.187
11.437
11.500
11.937
12.000
12.125
11.938
12.000
12.125
11.560
10.875
11.875
10.834
10.875
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.125
11.125
11.125
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.375
11.375
11.375
11.375
11.437
11.500
11.500

1.312
1.312
0.875
0.750
0.500
0.625
0.750
0.750
0.750
1.000
1.000
0.625
0.750
1.000
0.750
0.500
0.500
0.375
0.375
0.375
0.375
0.500
0.562
0.562
0.562
0.562
0.562
0.750
0.750
0.750
1.375
0.547
0.562
0.563
0.500
0.500
0.562
0.562
0.625
0.625
0.625
0.625
0.687
0.750
1.000
0.500
0.562
0.750
0.750
0.750
0.375
0.562

MODEL NO. PART NO.

53R1
53T2
59
23
23
23
23
23
23
53
53
23
59
59
23
23
23
23
23
23
26
23
23
53
59
61
62
53
62
142
53R1
23
53
23
23
25
23
53
23
25
26
59
23
53
53F1
23
53
53
59
23
23
53

22537-8829
22897-8829
24700-0068
25003-4850
25003-5901
25003-9272
25003-9145
25003-9057
25003-5472
21086-3658
21086-3659
25003-4618
24700-0069
24700-0070
25003-3110
25003-1079
25003-1064
25003-8140
25003-1030
25003-2068
24600-4927
25003-6391
25003-3660
21086-3660
24700-3660
24060-3660
21702-3660
21086-3668
21702-3668
21432-3668
22537-8868
25003-7736
21086-3661
25003-3661
25003-4923
25058-4923
25003-3662
21086-3662
25003-6808
25058-6808
24600-6808
24700-6808
25003-3146
21086-3670
22987-6481
25003-2352
21086-3663
21086-3671
24700-0071
25003-8841
25003-9957
21086-3664

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-95

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.000
10.039
10.063
10.125

11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.625
11.625
11.625
11.640
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.875
11.875
11.910
11.910
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.250
12.250
11.417
11.688
11.375

0.625
0.625
0.625
0.687
0.687
0.687
0.688
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.562
0.562
0.625
0.750
0.750
0.750
0.750
0.562
0.812
0.812
0.838
0.625
0.625
0.687
0.687
0.687
0.750
0.750
0.750
0.812
0.812
0.875
0.875
1.000
1.000
1.000
1.000
1.250
1.312
1.375
1.812
0.813
0.875
0.630
0.750
0.625

Garlock

MODEL NO. PART NO.

23
59
87
53
59
64
23
21
23
25
53
62
23
53
59
23
23
53
59
23
26
53
64
53
23
23
21
23
59
21
23
53
23
24
53
23
64
53
64
25
26
53
62
53R1
53T2
53R2
53R1
64
59
59
23
23

25003-4950
24700-4950
26080-4950
21086-3992
24700-3992
21238-3992
25003-3992
25001-3672
25003-3672
25058-3672
21086-3672
21702-3672
25003-3993
21086-3993
24700-0072
25003-2344
25003-3666
21086-3666
24700-0073
25003-3994
24600-3994
21086-3994
21238-3994
21086-3667
25003-1881
25003-4684
25001-8742
25003-3995
24700-0074
25001-5906
25003-5906
21086-5906
25003-3996
25005-3996
21086-3996
25003-3997
21238-3997
21086-3998
21238-3998
25058-3673
24600-0800
21086-3673
21702-3673
22537-8756
22897-4800
22627-6842
22537-8662
21238-3669
24700-0075
24700-4767
25003-4764
25003-6219

SHAFT

BORE

WIDTH

10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.125
10.158
10.187
10.187
10.187
10.188
10.229
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.236
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250

11.500
11.500
11.625
11.625
11.625
11.625
11.625
11.625
11.750
11.750
12.000
12.000
12.000
12.000
12.000
11.417
11.188
11.437
12.250
12.250
11.729
11.417
11.417
11.417
11.418
11.486
11.732
11.736
11.811
11.811
11.811
11.812
11.968
11.969
12.000
12.047
12.125
12.205
12.244
12.402
12.590
12.598
11.250
11.250
11.250
11.250
11.500
11.500
11.500
11.687
11.750
11.750

0.625
0.750
0.500
0.687
0.687
0.688
0.750
0.750
0.687
0.688
0.750
0.750
0.750
0.750
1.000
0.630
0.500
0.625
1.000
1.000
0.750
0.590
0.590
0.630
0.630
0.625
0.750
0.750
0.511
0.630
0.787
0.787
0.787
0.787
0.812
0.684
0.787
0.630
0.748
0.945
0.984
0.984
0.500
0.500
0.625
0.750
0.500
0.625
0.625
0.625
0.625
0.625

MODEL NO. PART NO.

23
23
23
53
64
59
23
53
64
59
23
26
53
59
53
23
23
23
53
59
23
23
26
26
59
23
23
23
53
23
26
59
23
87
23
23
23
23
23
59
59
59
23
59
23
142
23
23
59
23
23
59

25003-1908
25003-7147
25003-1461
21086-3999
21238-3999
24700-0076
25003-4000
21086-4000
21238-5989
24700-0077
25003-4003
24600-4003
21086-4003
24700-4003
21086-3674
25003-0695
25003-6216
25003-7588
21086-3675
24700-0078
25003-0821
25003-5351
24600-5351
24600-5111
24700-5111
25003-5957
25003-5665
25003-5186
21086-7892
25003-7010
24600-5429
24700-5429
25003-4805
26080-4805
25003-1026
25003-5381
25003-1292
25003-0872
25003-2314
24700-4891
24700-0079
24700-4999
25003-9476
24700-4049
25003-9384
21432-6931
25003-3198
25003-6698
24700-0080
25003-1070
25003-5523
24700-0081

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-96

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.250
10.300
10.313
10.357
10.375
10.375
10.375
10.375
10.375
10.375
10.375
10.375
10.375
10.375
10.433
10.433
10.433
10.437
10.437
10.437
10.438
10.438
10.438
10.438
10.438
10.441
10.500
10.500
10.500
10.500
10.500
10.500
10.500

11.750
11.750
11.750
11.750
11.750
12.000
12.000
12.000
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.500
12.500
13.750
11.550
11.938
11.500
11.625
11.625
11.633
11.875
11.875
12.000
12.197
12.197
12.250
12.500
11.417
11.683
11.683
11.937
12.437
12.500
11.688
12.000
12.000
12.438
12.500
11.441
11.500
11.500
11.500
11.500
11.625
11.750
11.750

0.687
0.687
0.750
0.750
0.750
0.625
0.750
0.750
0.625
0.625
0.750
0.750
0.812
0.812
1.000
1.000
1.000
0.750
0.813
0.750
0.625
0.813
0.625
0.625
0.625
0.812
0.500
0.750
0.750
1.000
1.000
0.750
0.875
0.625
0.625
0.625
0.750
0.750
1.000
0.812
0.625
0.750
0.875
1.000
0.375
0.375
0.500
0.625
0.750
0.547
0.500
0.625

MODEL NO. PART NO.

53
64
23
26
53
59
23
53
26R1
59
23
53
23
64
26
53
53F1
59
64
26
23
23
23
23
59
23
23
59
23
53
59
23
59
23
23
26
23
24
53
23
23
23
59
59
23
23
23
59
142
23
23
21

21086-4004
21238-4004
25003-4005
24600-4005
21086-4005
24700-0082
25003-4007
21086-4007
24620-4008
24700-4008
25003-3676
21086-3676
25003-4009
21238-4009
24600-3677
21086-3677
22987-3677
24700-0083
21238-4015
24600-4380
25003-1037
25003-4778
25003-2458
25003-9133
24700-0084
25003-1146
25003-6882
24700-0085
25003-0641
21086-4010
24700-0086
25003-9997
24700-0087
25003-2613
25003-7288
24600-7288
25003-9776
25005-6758
21086-3678
25003-3150
25003-2655
25003-4812
24700-0088
24700-0089
25003-6568
25003-2376
25003-6781
24700-3427
21432-9922
25003-9679
25003-8334
25001-5934

SHAFT

BORE

WIDTH

10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.500
10.530
10.562
10.562
10.625
10.625
10.625
10.625
10.625

11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.906
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.125
12.125
12.125
12.125
12.250
12.250
12.250
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.625
12.625
12.030
12.562
12.562
11.625
11.625
11.812
11.875
11.875

0.625
0.625
0.625
0.625
0.625
0.750
0.875
0.766
0.500
0.625
0.625
0.625
0.625
0.687
0.687
0.688
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.500
0.625
0.625
0.750
0.750
0.750
0.812
0.812
0.812
1.000
1.000
1.375
1.375
1.812
1.000
1.000
0.625
0.750
0.750
0.415
0.625
0.625
0.625
0.625

MODEL NO. PART NO.

23
25
26
26R1
59
23
EQ
23
23
23
25
59
113
53
64
23
21
23
25
53
62
59
23
53
62
23
53
59
23
26R1
59
23
53
62
23
62
64
26
53
53R1
53T2
53T2
53
59
23
23
24
23
23
59
23
25

25003-5934
25058-5934
24600-3665
24620-3665
24700-3665
25003-8565
24801-3679
25003-1980
25003-6683
25003-4495
25058-4495
24700-0090
21012-4495
21086-4011
21238-4011
25003-4011
25001-4012
25003-4012
25058-4012
21086-4012
21702-4012
24700-0091
25003-4013
21086-4013
21702-4013
25003-4014
21086-4014
24700-0092
25003-1971
24620-4006
24700-4006
25003-4016
21086-4016
21702-4016
25003-4017
21702-4017
21238-4017
24600-3680
21086-3680
22537-7774
22897-7774
22897-8680
21086-3681
24700-0093
25003-5639
25003-4963
25005-4963
25003-5294
25003-5067
24700-0094
25003-7432
25058-7432

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-97

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.625
10.629
10.629
10.629
10.629
10.629
10.630
10.630
10.630
10.630
10.630
10.630
10.687
10.688
10.688
10.688
10.710
10.728
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750

12.000
12.125
12.125
12.125
12.250
12.250
12.375
12.375
12.375
12.375
12.500
12.500
12.500
12.500
12.625
12.625
13.000
11.629
11.811
11.811
12.119
12.251
12.126
12.205
12.205
12.205
12.362
13.189
12.687
11.742
12.250
12.500
12.511
11.728
11.750
11.750
11.750
11.750
11.750
11.875
11.875
11.875
12.000
12.000
12.000
12.000
12.250
12.250
12.250
12.250
12.250
12.250

0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
1.437
0.750
0.750
0.969
1.000
0.750
0.812
0.750
0.409
0.590
0.630
0.750
0.625
0.687
0.630
0.630
0.787
0.787
0.708
0.750
0.625
0.625
0.625
0.625
0.500
0.500
0.562
0.562
0.562
0.562
0.562
0.625
1.375
0.562
0.625
0.625
0.625
0.562
0.562
0.562
0.562
0.625
0.625

Garlock

MODEL NO. PART NO.

23
23
53
59
23
53
23
53
59
53T2
53
59
53F1
53F1
23
23
59
23
23
26
23
23
64
23
59
26R1
23
59
23
23
23
59
23
23
23
23
26
53
59
53
53
53T2
53
23
53
59
23
26
53
59
23
53

25003-6935
25003-4018
21086-4018
24700-0095
25003-4019
21086-4019
25003-4020
21086-4020
24700-0096
22897-4653
21086-4021
24700-0097
22987-6447
22987-7585
25003-6704
25003-6428
24700-0098
25003-7709
25003-5350
24600-5445
25003-5881
25003-5862
21238-7769
25003-8655
24700-8655
24620-2965
25003-1027
24700-0099
25003-4854
25003-0205
25003-2791
24700-2620
25003-1049
25003-4994
25003-7598
25003-3682
24600-3682
21086-3682
24700-3682
21086-3683
21086-4519
22897-9611
21086-3684
25003-4520
21086-4520
24700-0100
25003-3685
24600-3685
21086-3685
24700-3685
25003-4522
21086-4522

SHAFT

BORE

WIDTH

10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.787
10.787
10.826
10.827
10.827
10.827
10.875
10.875
10.875
10.875
10.875
10.875
10.875
10.875
10.875
10.875
10.937
10.937
10.937
10.937
10.937
10.984
10.992

12.250
12.250
12.250
12.250
12.375
12.500
12.500
12.500
12.500
12.500
12.625
12.687
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
13.000
13.000
13.250
11.969
12.250
12.008
11.827
12.205
12.205
12.375
12.375
12.375
12.375
12.500
12.500
12.625
12.875
12.875
12.875
12.187
12.437
12.500
12.500
12.937
12.165
12.402

0.625
0.687
0.750
0.750
0.562
0.562
0.562
0.562
0.625
0.625
0.750
0.578
0.562
0.562
0.562
0.625
0.625
0.750
0.750
0.750
0.812
0.812
0.812
0.875
1.000
1.000
0.813
0.875
0.813
0.591
0.688
0.591
0.590
0.591
0.591
0.687
0.750
0.750
0.750
0.687
1.000
0.750
0.500
0.578
0.812
0.625
0.625
0.625
0.625
0.750
0.591
0.787

MODEL NO. PART NO.

59
64
23
53
53
23
26
53
53
59
53
23
23
26
53
26R1
59
23
53
87
23
62
64
53
25
53
64
59
64
26
26
26
23
23
26
64
23
25
59
64
59
23
23
23
23
23
23
23
23
23
23
59

24700-0101
21238-4023
25003-4024
21086-4024
21086-4025
25003-3686
24600-3686
21086-3686
21086-4524
24700-0102
21086-4029
25003-1623
25003-3687
24600-3687
21086-3687
24620-5465
24700-5465
25003-4030
21086-4030
26080-4030
25003-4031
21702-4031
21238-4031
21086-3688
25058-3689
21086-3689
21238-4022
24700-0103
21238-4026
24600-2148
24600-8830
24600-1040
25003-5808
25003-2350
24600-3722
21238-4027
25003-4032
25058-4032
24700-0104
21238-4028
24700-0105
25003-9542
25003-1982
25003-9535
25003-6416
25003-9932
25003-6087
25003-8874
25003-9974
25003-6504
25003-1246
24700-4858

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-98

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.000
11.023
11.023
11.024
11.024
11.024
11.024
11.024
11.024

12.000
12.000
12.000
12.000
12.000
12.000
12.125
12.125
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.375
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.625
12.625
12.750
12.812
12.875
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.250
12.023
12.023
12.197
12.197
12.205
12.205
12.205
12.441

0.375
0.500
0.625
0.625
0.625
0.625
0.547
0.625
0.562
0.609
0.625
0.625
0.625
0.625
0.687
0.688
0.750
0.375
0.500
0.625
0.625
0.625
0.625
0.625
0.687
0.750
1.375
0.625
0.750
0.750
0.625
0.812
0.500
0.625
0.687
0.750
0.750
0.750
0.812
0.812
1.000
1.000
1.000
1.000
0.500
0.625
0.625
0.629
0.630
0.630
0.787
0.709

MODEL NO. PART NO.

23
23
23
26
53
59
23
53
64
26R1
23
25
53
59
64
26
23
23
23
23
25
53
26R1
59
64
23
53R2
23
23
23
23
23
23
59
64
23
24
26
23
64
53
53R1
53R2
53
23
23
53
59
23
59
23
26

25003-8761
25003-9693
25003-3691
24600-3691
21086-3691
24700-3691
25003-6393
21086-4034
21238-3135
24620-5018
25003-3692
25058-3692
21086-3692
24700-0106
21238-3720
24600-3720
25003-4450
25003-7606
25003-7716
25003-3693
25058-3693
21086-3693
24620-3693
24700-3693
21238-4611
25003-6394
22627-5927
25003-5006
25003-7204
25003-4867
25003-5462
25003-9149
25003-1905
24700-0107
21238-6034
25003-6395
25005-6395
24600-6395
25003-4036
21238-4036
21086-3694
22537-3694
22627-3694
21086-4037
25003-6964
25003-5958
21086-4038
24700-0108
25003-2582
24700-0982
25003-0890
24600-5233

SHAFT

BORE

WIDTH

11.024
11.024
11.024
11.024
11.024
11.024
11.024
11.024
11.024
11.024
11.027
11.029
11.031
11.031
11.062
11.062
11.062
11.062
11.062
11.063
11.063
11.063
11.063
11.063
11.100
11.125
11.125
11.125
11.125
11.125
11.125
11.125
11.125
11.150
11.150
11.181
11.187
11.188
11.219
11.220
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250

12.520
12.598
12.598
12.598
12.598
12.598
12.598
12.992
13.386
13.386
12.500
12.029
12.031
12.031
12.250
12.250
12.500
12.750
13.000
12.250
12.313
12.500
12.500
13.000
12.150
12.500
12.750
13.000
13.000
13.000
13.125
13.250
13.250
12.375
12.526
12.992
12.188
13.000
12.953
12.402
12.250
12.250
12.500
12.500
12.500
12.530
12.750
12.750
12.750
12.750
12.750
12.750

0.709
0.630
0.709
0.787
0.787
0.787
0.787
0.610
0.813
0.984
0.625
0.375
0.500
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.625
0.750
1.000
0.687
0.750
1.000
0.812
0.813
0.875
0.625
0.500
0.622
0.500
0.750
0.787
0.787
0.625
0.750
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.687
0.687
0.687

MODEL NO. PART NO.

23
53
59
23
26
59
64
23
64
59
23
23
23
23
23
53
53
53
53
59
23
23
59
59
23
23
59
64
23
59
23
64
59
23
23
23
23
23
23
23
23
142
23
25
59
23
23
26
59
23
53
64

25003-1962
21086-7848
24700-4028
25003-7391
24600-3695
24700-3695
21238-7391
25003-0897
21238-4039
24700-0109
25003-5303
25003-7878
25003-1465
25003-5724
25003-3695
21086-3695
21086-3696
21086-3697
21086-3698
24700-0110
25003-3261
25003-3696
24700-0111
24700-0112
25003-0858
25003-5395
24700-0113
21238-3699
25003-1124
24700-0114
25003-4049
21238-3700
24700-0115
25003-3154
25003-0678
25003-0740
25003-6238
25003-1782
25003-5712
25003-1262
25003-9829
21432-8297
25003-6672
25058-6672
24700-0116
25003-2968
25003-7832
24600-7832
24700-7832
25003-4527
21086-4527
21238-4527

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-99

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.250
11.335
11.344
11.365
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.375
11.417
11.417
11.417
11.417
11.417
11.417
11.418
11.422
11.437
11.438
11.471
11.500
11.500
11.500
11.500
11.500
11.500
11.500

12.750
12.750
12.750
12.750
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.500
13.500
12.520
12.593
12.625
12.375
12.625
12.875
12.875
12.875
12.875
13.000
13.000
13.000
13.000
13.000
13.000
13.375
13.375
13.500
13.500
13.500
12.992
12.992
13.142
13.417
13.417
13.780
12.992
12.921
13.750
13.000
13.471
12.375
12.500
12.500
12.500
12.625
12.750
12.750

0.750
0.750
0.750
0.750
0.625
0.625
0.687
0.812
0.812
0.812
0.812
1.000
0.875
1.000
0.500
0.625
0.625
0.500
0.625
0.750
0.750
0.750
0.750
0.625
0.687
0.750
0.750
0.750
1.375
0.812
0.813
1.000
1.000
1.250
0.787
0.787
0.750
0.750
0.812
0.984
0.709
0.750
0.625
0.688
0.750
0.375
0.375
0.500
0.500
0.625
0.500
0.625

Garlock

MODEL NO. PART NO.

23
25
53
59
23
59
64
21
23
59
64
53
59
53
23
23
23
23
23
23
25
53
59
59
23
23
53
59
53R2
64
59
53
59
53F1
23
26R1
59
23
23
59
23
23
59
59
23
23
23
23
26
23
23
23

25003-4046
25058-4046
21086-4046
24700-1904
25003-0420
24700-0117
21238-8778
25001-4047
25003-4047
24700-3613
21238-4047
21086-3703
24700-0118
21086-4048
25003-9942
25003-5014
25003-7437
25003-6549
25003-5397
25003-4050
25058-4050
21086-4050
24700-0119
24700-0120
25003-5261
25003-4051
21086-4051
24700-4051
22627-6063
21238-4052
24700-0121
21086-3704
24700-0122
22987-4995
25003-1031
24620-3886
24700-0123
25003-5882
25003-0932
24700-3100
25003-0416
25003-5719
24700-4573
24700-0124
25003-5851
25003-7639
25003-8962
25003-9094
24600-3850
25003-5642
25003-6621
25003-7263

SHAFT

BORE

WIDTH

11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.500
11.562
11.575
11.614
11.625
11.625
11.625
11.625
11.625
11.687
11.687
11.688
11.688
11.732
11.750
11.750
11.750
11.750

12.750
12.750
12.875
12.875
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.125
13.250
13.250
13.250
13.250
13.375
13.375
13.375
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.062
12.575
13.114
12.625
13.000
13.125
13.191
13.625
13.187
13.250
13.000
13.750
12.606
13.000
13.250
13.250
13.250

0.625
0.625
0.688
0.750
0.500
0.625
0.625
0.625
0.687
0.687
0.687
0.688
0.750
0.750
0.750
0.750
0.750
0.812
1.250
0.812
0.750
0.750
0.750
0.812
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.812
0.812
1.000
1.250
0.750
0.500
0.750
0.500
0.750
0.750
0.750
0.812
0.625
0.625
0.750
0.750
0.375
0.813
0.625
0.625
0.625

MODEL NO. PART NO.

26
59
59
23
23
23
26
59
53
59
64
23
21
23
25
53
59
62
53T2
23
23
53
59
23
23
53
59
59
23
53
62
23
64
53
53R2
23
23
23
23
59
23
59
23
23
23
59
23
23
23
23
26
59

24600-7263
24700-7263
24700-0125
25003-5012
25003-7219
25003-6687
24600-0126
24700-0126
21086-4057
24700-2569
21238-4057
25003-4057
25001-4058
25003-4058
25058-4058
21086-4058
24700-2906
21702-5773
22897-5584
25003-2646
25003-4060
21086-4060
24700-0127
25003-1035
25003-4061
21086-4061
24700-0128
24700-0129
25003-4062
21086-4062
21702-4062
25003-4063
21238-4063
21086-3705
22627-9036
25003-8559
25003-5307
25003-5878
25003-7053
24700-1875
25003-8287
24700-0130
25003-5298
25003-5776
25003-6840
24700-5802
25003-5176
25003-7874
25003-3239
25003-9980
24600-0131
24700-0131

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-100

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.750
11.808
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.811
11.812
11.813
11.813
11.813
11.813
11.875
11.875
11.875
11.906
11.937
11.937
11.938
11.938
11.938
11.962
12.000

13.250
13.250
13.250
13.250
13.250
13.250
13.500
13.500
13.562
13.750
13.750
13.750
13.750
13.750
13.750
13.750
14.000
14.000
13.308
12.811
12.992
13.071
13.189
13.311
13.385
13.386
13.386
13.386
13.386
13.543
13.543
13.543
13.543
13.543
13.583
13.779
13.312
13.780
13.812
13.813
14.000
12.875
13.375
13.875
13.156
13.937
13.938
13.438
13.760
13.938
12.687
12.875

0.687
0.687
0.688
0.750
0.750
0.750
0.750
0.812
0.500
0.625
0.625
0.625
0.625
0.750
0.812
1.000
1.000
1.000
0.750
0.500
0.590
0.630
0.709
0.750
0.812
0.630
0.630
0.709
0.787
0.787
0.787
0.807
0.807
0.807
0.866
0.750
0.750
1.000
0.625
0.813
0.750
0.500
0.750
0.750
0.625
0.750
0.812
0.625
0.750
0.625
0.500
0.375

MODEL NO. PART NO.

53
64
23
23
53
62
23
23
23
23
23
59
61
23
23
53
53
59
23
23
23
59
23
23
23
23
53
59
23
23
59
23
88
88NS
26R1
23
23
59
59
23
59
23
23
23
23
24
23
23
23
59
23
23

21086-4064
21238-4064
25003-4064
25003-4065
21086-4065
21702-4065
25003-6826
25003-9976
25003-2704
25003-9721
25003-9726
24700-0132
24060-9721
25003-6836
25003-8315
21086-3706
21086-3707
24700-0133
25003-9793
25003-5835
25003-5352
24700-4009
25003-5446
25003-6932
25003-0947
25003-7893
21086-7893
24700-0134
25003-4655
25003-4602
24700-4056
25003-8525
26088-8525
26188-8525
24620-1037
25003-4881
25003-9491
24700-0135
24700-0136
25003-0697
24700-0137
25003-6705
25003-6328
25003-9749
25003-6719
25005-7876
25003-7105
25003-4604
25003-4452
24700-0138
25003-4785
25003-1310

SHAFT

BORE

WIDTH

12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000

13.000
13.000
13.000
13.125
13.125
13.125
13.250
13.250
13.250
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.625
13.625
13.625
13.625
13.625
13.625
13.625
13.750
13.750
13.750
13.750
13.875
13.875
13.875
13.937
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000

0.500
0.625
0.750
1.250
1.312
1.375
0.625
0.625
0.750
0.625
0.625
0.687
0.688
0.688
0.688
0.750
0.750
0.750
0.812
1.312
0.625
0.687
0.750
0.750
0.750
0.750
1.437
0.688
0.688
0.688
0.750
0.437
0.500
1.312
0.812
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812

MODEL NO. PART NO.

23
23
142
142
142
142
23
59
23
25
59
64
23
26
59
23
53
62
62
53R1
59
64
23
26
53
62
53R2
23
26
64
23
23
23
53R2
23
23
26
59
61
64
23
24
53
26R1
64
88
88NS
21
23
25
59
62

25003-8804
25003-1925
21432-8107
21432-9707
21432-2986
21432-7445
25003-7306
24700-0139
25003-0954
25058-4707
24700-0140
21238-4612
25003-4612
24600-4612
24700-4612
25003-4067
21086-4067
21702-4067
21702-5670
22537-5950
24700-0141
21238-8523
25003-4068
24600-4068
21086-4068
21702-4068
22627-7326
25003-3701
24600-0985
21238-3701
25003-4911
25003-0623
25003-0949
22627-4884
25003-9148
25003-3853
24600-3853
24700-3853
24060-3853
21238-5838
25003-4071
25005-4071
21086-4071
24620-4071
21238-4071
26088-4071
26188-4071
25001-4072
25003-4072
25058-4072
24700-4072
21702-4072

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-101

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.000
12.050
12.062
12.063
12.063
12.063
12.125
12.125
12.125
12.125
12.125
12.125
12.125
12.125
12.147
12.187
12.188
12.188
12.188
12.204
12.204
12.205
12.205
12.205
12.205
12.205
12.205
12.208
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250

14.000
14.000
14.000
14.000
14.000
14.000
14.188
14.250
14.250
14.750
14.750
13.313
13.562
13.313
13.625
13.625
13.125
13.375
13.625
13.875
13.875
14.000
14.000
14.125
13.688
13.688
13.438
13.688
14.000
13.385
13.780
13.189
13.205
13.780
13.937
13.937
14.173
13.703
13.500
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.813
13.821
13.821
13.875
14.000
14.000

0.812
0.937
1.000
1.000
1.250
1.375
1.000
1.000
1.000
0.813
0.875
0.750
0.750
0.750
0.750
0.750
0.500
0.750
0.750
0.687
0.750
0.875
1.000
0.750
0.625
0.625
0.625
0.625
0.750
0.590
0.787
0.500
0.500
0.709
0.787
0.787
0.984
0.750
0.750
0.625
0.625
0.687
0.750
0.750
0.750
0.812
0.719
0.719
0.750
0.625
0.625
0.625

Garlock

MODEL NO. PART NO.

64
59
53
53F1
53F1
53R2
59
53
59
64
59
59
23
59
21
23
23
23
23
59
59
59
53
23
23
23
59
59
23
23
59
23
23
23
23
87
59
23
23
26
59
64
23
26
53
62
59
23
23
23
23
59

21238-4072
24700-2980
21086-3709
22987-3709
22987-7392
22627-7283
24700-0142
21086-3710
24700-3710
21238-3702
24700-0143
24700-0144
25003-7250
24700-0145
25001-4441
25003-4441
25003-1781
25003-2395
25003-7570
24700-5581
24700-0146
24700-0147
21086-4073
25003-6484
25003-0990
25003-6253
24700-0148
24700-0149
25003-0691
25003-5340
24700-0999
25003-5536
25003-7735
25003-3093
25003-2454
26080-2454
24700-5693
25003-6441
25003-0599
24600-4041
24700-4041
21238-4613
25003-4074
24600-4074
21086-4074
21702-7381
24700-0150
25003-0950
25003-4895
25003-3137
25003-2472
24700-0151

SHAFT

BORE

WIDTH

12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.250
12.283
12.312
12.318
12.366
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.375
12.380
12.401
12.402
12.406
12.437
12.438
12.438
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500

14.000
14.000
14.000
14.125
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
13.750
13.937
13.694
14.500
13.375
13.500
13.705
13.875
13.875
13.875
13.875
13.875
13.875
14.000
14.000
14.375
14.375
14.500
14.500
14.380
14.173
13.976
13.906
14.000
14.375
14.438
13.375
13.500
13.500
13.500
13.750
13.750
13.875
13.906
14.000
14.000
14.000
14.000

0.687
0.750
0.875
0.750
0.625
0.750
0.750
0.750
0.750
0.812
0.812
0.812
1.000
1.250
0.688
0.750
0.500
0.750
0.500
1.250
0.375
0.625
0.687
0.688
0.750
0.750
1.437
0.687
0.750
0.687
1.000
0.813
0.875
0.812
0.787
0.709
0.750
0.750
0.812
0.812
0.500
0.500
0.500
0.625
0.625
0.625
0.437
0.750
0.625
0.625
0.625
0.625

MODEL NO. PART NO.

64
26
59
23
59
23
53
88
88NS
23
59
64
53
87
26
23
23
59
26
142
23
23
64
59
23
53
53R2
64
59
64
59
64
59
23
23
59
23
23
23
23
23
23
26
23
23
59
23
23
23
26
59
113

21238-4055
24600-4232
24700-1869
25003-1710
24700-0152
25003-6829
21086-6829
26088-6829
26188-6829
25003-4075
24700-1868
21238-4075
21086-3713
26080-1040
24600-8814
25003-5558
25003-0677
24700-3454
24600-2007
21432-1715
25003-1973
25003-9301
21238-4076
24700-0153
25003-4077
21086-4077
22627-4751
21238-4056
24700-0154
21238-4097
24700-0155
21238-4106
24700-0156
25003-9928
25003-1108
24700-4029
25003-5953
25003-9396
25003-1173
25003-1176
25003-1984
25003-5114
24600-5114
25003-3712
25003-8229
24700-0157
25003-6449
25003-8998
25003-4496
24600-4496
24700-4496
21012-4496

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-102

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.500
12.562
12.565
12.579
12.590
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.598
12.625
12.625
12.625

14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.008
14.062
14.062
14.062
14.375
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.750
14.750
15.000
15.000
14.062
14.063
14.000
14.125
13.583
13.780
13.976
14.095
14.173
14.173
14.173
14.173
14.173
14.173
14.252
14.330
14.331
13.875
14.000
14.125

0.687
0.687
0.687
0.687
0.687
0.688
0.750
0.750
0.750
0.812
1.375
0.906
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.906
1.000
1.250
1.312
1.000
1.000
0.813
0.813
0.750
0.750
0.750
1.000
0.500
0.625
0.630
0.750
0.708
0.708
0.748
0.787
0.787
0.787
0.812
0.787
0.787
0.625
0.750
0.687

MODEL NO. PART NO.

53
59
64
88
88NS
23
23
25
53
23
53R2
59
23
21
23
23
23
25
26
59
64
23
62
64
59
53
53R2
53T2
53
59
59
64
23
59
23
59
23
59
59
23
23
59
23
23
26
59
23
23
26
23
23
64

21086-4079
24700-2936
21238-4079
26088-4079
26188-4079
25003-4079
25003-4080
25058-4080
21086-4080
25003-4591
22627-8716
24700-4621
25003-1691
25001-8589
25003-8589
25003-1304
25003-4082
25058-4082
24600-4082
24700-4082
21238-4082
25003-4083
21702-4083
21238-4083
24700-1050
21086-3714
22627-9419
22897-6527
21086-4085
24700-0158
24700-0159
21238-4084
25003-6815
24700-0160
25003-1989
24700-0161
25003-5576
24700-0162
24700-0163
25003-5667
25003-1113
24700-1966
25003-1712
25003-1103
24600-4397
24700-4397
25003-1182
25003-2911
24600-3721
25003-7135
25003-4480
21238-4081

SHAFT

BORE

WIDTH

12.625
12.625
12.625
12.625
12.625
12.625
12.625
12.687
12.687
12.687
12.688
12.688
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.750
12.795
12.795
12.795
12.812
12.875
12.875
12.875
12.875
12.875
12.875
12.875
12.875
12.875
12.875
12.906
12.909
12.922
12.938

14.125
14.125
14.500
14.500
14.625
14.625
14.625
14.687
14.750
14.750
14.250
14.750
13.750
14.000
14.000
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.482
14.500
14.687
14.750
14.750
14.750
14.750
14.750
15.000
15.000
15.250
15.500
13.669
14.370
14.370
14.812
13.875
14.000
14.375
14.750
14.750
14.750
14.875
15.000
15.000
15.500
14.906
13.872
14.173
14.250

0.750
0.750
0.687
0.875
0.750
0.875
1.000
0.812
0.812
1.000
0.750
1.000
0.500
0.500
0.750
0.625
0.625
0.687
0.688
0.750
0.750
0.812
0.787
0.750
0.812
0.687
0.750
0.750
0.750
0.812
0.813
0.875
0.875
0.875
0.375
0.630
0.630
0.750
0.500
0.750
0.750
0.812
1.000
1.000
0.750
0.750
0.812
0.875
0.750
0.675
0.590
0.625

MODEL NO. PART NO.

23
59
64
59
23
59
53
23
64
53
59
59
23
23
23
23
59
64
23
23
26
23
23
23
23
64
21
23
59
23
64
59
59
59
23
23
59
23
23
23
23
23
53
59
23
24
64
59
23
23
23
23

25003-4086
24700-4086
21238-3716
24700-0164
25003-7279
24700-0165
21086-3715
25003-5669
21238-9766
21086-3717
24700-0166
24700-0167
25003-7600
25003-3224
25003-4788
25003-4088
24700-0168
21238-4089
25003-4089
25003-5942
24600-5942
25003-2185
25003-2319
25003-5917
25003-0617
21238-7652
25001-6396
25003-6396
24700-0169
25003-2497
21238-4092
24700-0170
24700-0171
24700-0172
25003-8261
25003-3209
24700-4058
25003-1016
25003-1960
25003-1619
25003-5939
25003-6782
21086-3718
24700-3718
25003-8115
25005-9937
21238-5404
24700-0173
25003-8511
25003-4791
25003-5341
25003-0203

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-103

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

12.992
12.992
12.992
12.992
12.992
12.992
12.992
12.992
12.992
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000
13.000

14.173
14.173
14.566
14.566
14.567
14.724
14.724
14.724
15.354
14.000
14.000
14.125
14.125
14.250
14.375
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.606
14.608
14.625
14.625
14.625
14.625
14.734
14.750
14.750
14.812
14.825
14.875
14.875
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000

0.394
0.590
0.708
0.708
0.482
0.748
0.787
0.787
0.984
0.500
0.750
0.546
1.250
0.625
0.375
0.625
0.625
0.687
0.687
0.687
0.687
0.688
0.750
0.750
0.750
0.812
1.000
0.703
0.750
0.750
0.750
0.750
0.750
0.703
0.500
0.750
0.625
0.812
0.687
0.875
0.625
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
1.000
1.375

Garlock

MODEL NO. PART NO.

23
26
23
59
26R1
23
23
59
59
23
142
23
142
23
23
23
59
23
53
59
64
26
21
23
53
23
53F1
23
23
23
26
53
59
23
23
23
59
23
64
59
23
23
24
26
53
59
21
23
62
64
53
53R2

25003-0590
24600-5341
25003-9996
24700-0174
24620-3235
25003-3170
25003-4630
24700-5525
24700-1000
25003-8576
21432-8296
25003-4969
21432-7729
25003-4770
25003-1698
25003-7805
24700-7805
25003-4093
21086-4093
24700-4093
21238-4093
24600-4093
25001-4094
25003-4094
21086-4094
25003-0818
22987-3890
25003-1242
25003-1889
25003-4095
24600-4095
21086-4095
24700-4095
25003-9697
25003-9255
25003-7547
24700-0175
25003-6168
21238-4096
24700-0176
25003-9598
25003-4098
25005-4098
24600-4098
21086-4098
24700-4098
25001-4099
25003-4099
21702-4099
21238-4099
21086-3719
22627-6607

SHAFT

BORE

WIDTH

13.070
13.125
13.125
13.125
13.125
13.125
13.187
13.220
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.250
13.312
13.375
13.375
13.375
13.375
13.375
13.375
13.375
13.375
13.383
13.386
13.386
13.386

14.570
14.625
14.875
15.000
15.125
15.125
14.187
14.407
14.250
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.875
14.875
14.875
14.875
15.000
15.000
15.125
15.125
15.125
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.375
15.375
15.500
16.000
15.312
14.375
14.625
14.875
14.875
14.875
15.000
15.375
15.375
14.883
14.645
14.882
14.886

0.750
0.750
0.625
0.750
0.750
0.812
0.500
0.625
0.500
0.625
0.625
0.687
0.687
0.688
0.750
0.750
0.687
0.750
0.750
0.750
0.687
0.750
0.500
0.687
0.875
0.687
0.750
0.750
0.750
0.750
0.812
0.812
0.812
1.000
1.000
1.000
1.000
1.000
0.875
0.812
0.500
0.500
0.625
0.750
0.750
0.750
0.812
0.875
0.750
0.630
0.750
0.750

MODEL NO. PART NO.

23
23
23
23
23
23
23
59
23
23
59
53
64
26
23
53
64
23
53
59
64
59
23
64
59
64
23
59
88
88NS
21
23
64
53
59
53
59
53
59
23
23
23
53
23
59
59
23
59
23
59
23
23

25003-0994
25003-9258
25003-9949
25003-1769
25003-7602
25003-5783
25003-8332
24700-0177
25003-0489
25003-6263
24700-0178
21086-4101
21238-4101
24600-2580
25003-4102
21086-4102
21238-7734
25003-4103
21086-4103
24700-0179
21238-7169
24700-0180
25003-4913
21238-4105
24700-0181
21238-6294
25003-6264
24700-0182
26088-6264
26188-6264
25001-4779
25003-4779
21238-4779
21086-4107
24700-5740
21086-4109
24700-0183
21086-4113
24700-0184
25003-7969
25003-9331
25003-0944
21086-4116
25003-7323
24700-0185
24700-0186
25003-9256
24700-0187
25003-4596
24700-0188
25003-5664
25003-8701

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-104

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

13.386
13.386
13.386
13.386
13.386
13.386
13.386
13.386
13.469
13.469
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.500
13.504
13.562
13.580
13.580
13.622

14.960
14.961
14.961
14.961
14.961
14.961
15.118
15.157
14.468
14.680
14.500
14.919
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.250
15.250
15.250
15.312
15.375
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.750
15.750
15.752
17.300
15.504
15.062
14.580
15.030
15.122

0.688
0.630
0.708
0.709
0.709
0.787
0.787
0.787
0.500
0.500
0.500
0.700
0.625
0.625
0.653
0.653
0.687
0.687
0.687
0.687
0.688
0.688
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.688
0.688
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.875
1.000
1.375
1.375
1.437
0.813
0.875
1.000
1.000
0.812
0.750
0.500
0.750
0.750

MODEL NO. PART NO.

59
53
23
26
59
59
23
23
23
23
23
23
23
59
26
26R1
23
53
59
64
88
88NS
23
53
53
59
64
59
53
88
88NS
23
26
53
59
21
23
64
53
53
53R1
53R2
53R1
64
59
59
59
23
23
23
23
23

24700-0189
21086-7896
25003-0893
24600-3882
24700-3882
24700-5170
25003-2245
25003-2286
25003-5984
25003-3114
25003-0986
25003-2383
25003-8620
24700-0190
24600-5456
24620-5456
25003-4121
21086-4121
24700-4251
21238-4121
26088-4121
26188-4121
25003-4122
21086-4122
21086-4124
24700-0191
21238-4124
24700-0192
21086-4125
26088-2982
26188-2982
25003-4127
24600-4127
21086-4127
24700-4127
25001-4128
25003-4128
21238-4128
21086-9964
21086-3721
22537-6154
22627-6154
22537-9039
21238-4123
24700-0193
24700-0194
24700-0195
25003-4666
25003-5659
25003-5640
25003-5683
25003-7019

SHAFT

BORE

WIDTH

13.625
13.625
13.625
13.625
13.625
13.625
13.625
13.625
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.750
13.779
13.779
13.779
13.779
13.779
13.779
13.780
13.780
13.780
13.780
13.780
13.780
13.780
13.780
13.780

14.625
14.875
14.875
14.875
15.031
15.500
15.625
16.125
14.750
14.750
14.750
15.000
15.000
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.375
15.500
15.500
15.500
15.508
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
16.000
16.000
15.276
15.279
15.354
15.354
15.709
15.748
14.961
14.961
14.961
15.512
15.512
15.512
15.512
15.748
16.142

0.500
0.687
0.750
0.750
0.750
1.000
0.812
1.250
0.500
0.500
0.750
0.750
0.750
0.500
0.625
0.687
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.812
0.812
0.812
0.969
1.000
1.000
1.437
0.813
0.875
0.500
0.750
0.630
0.709
0.787
0.669
0.394
0.630
0.787
0.500
0.748
0.787
0.787
0.984
0.787

MODEL NO. PART NO.

23
59
23
25
23
59
23
59
21
23
142
23
59
23
59
53
64
23
26
53
23
53
59
64
59
59
23
53
23
62
64
53F1
53
59
53T2
64
59
23
23
23
59
23
59
23
59
59
23
59
26
59
59
59

25003-5383
24700-2018
25003-5825
25058-5825
25003-0726
24700-0196
25003-9921
24700-0197
25001-7175
25003-7175
21432-8106
25003-0453
24700-0198
25003-2980
24700-0199
21086-4529
21238-4529
25003-4530
24600-4530
21086-4530
25003-1445
21086-4531
24700-0200
21238-4531
24700-0201
24700-0202
25003-4532
21086-4532
25003-4129
21702-4129
21238-4129
22987-5831
21086-3722
24700-5711
22897-5304
21238-4119
24700-0203
25003-5477
25003-9316
25003-8656
24700-0204
25003-5874
24700-3490
25003-0591
24700-3212
24700-4755
25003-2109
24700-5107
24600-5102
24700-5102
24700-3091
24700-1902

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-105

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

13.780
13.813
13.813
13.850
13.875
13.875
13.875
13.875
13.875
13.895
13.937
13.937
13.937
13.938
13.938
13.938
13.938
13.938
13.938
13.976
13.980
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000

16.142
16.000
16.000
15.500
15.375
15.500
15.875
16.000
16.000
15.750
15.437
15.437
15.437
15.438
15.500
15.500
15.744
16.000
16.000
15.551
15.500
15.000
15.125
15.250
15.375
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.562
15.562
15.563
15.625
15.625
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.752
16.000
16.000

0.984
0.812
1.000
0.750
0.750
0.600
0.812
0.812
1.000
0.750
0.687
0.687
0.750
0.625
0.687
0.750
1.000
0.687
0.875
0.787
0.750
0.500
1.375
0.750
0.531
0.625
0.625
0.625
0.687
0.687
0.750
0.750
0.750
0.750
0.750
1.000
0.750
0.750
0.750
0.625
0.812
0.500
0.687
0.687
0.688
0.750
0.750
0.750
0.875
0.813
0.625
0.750

Garlock

MODEL NO. PART NO.

59
64
59
23
23
23
23
64
59
23
21
64
23
59
64
59
59
64
59
59
23
23
142
23
23
23
26
59
23
64
21
23
25
53
62
26R1
53
59
23
59
23
23
62
64
59
23
53
64
87
59
23
23

24700-5477
21238-4108
24700-0205
25003-6515
25003-7379
25003-0690
25003-4137
21238-4110
24700-0206
25003-8999
25001-4130
21238-4130
25003-9783
24700-0207
21238-4111
24700-0208
24700-0210
21238-4112
24700-0211
24700-5441
25003-6518
25003-6560
21432-3099
25003-8850
25003-7704
25003-6303
24600-0212
24700-0212
25003-4131
21238-4131
25001-4132
25003-4132
25058-4132
21086-4132
21702-4132
24620-4129
21086-4133
24700-0213
25003-4133
24700-0214
25003-1913
25003-6324
21702-5991
21238-5991
24700-0215
25003-4134
21086-4134
21238-4134
26080-9927
24700-0216
25003-9763
25003-6877

SHAFT

BORE

WIDTH

14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.000
14.013
14.016
14.028
14.041
14.063
14.094
14.100
14.125
14.125
14.125
14.140
14.166
14.172
14.173
14.173
14.173
14.173
14.173
14.173
14.173
14.173
14.173
14.173
14.173
14.177
14.187
14.187
14.188
14.188
14.188
14.188
14.188
14.188
14.188
14.190
14.214

16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.250
16.250
16.250
16.250
16.250
16.500
16.500
16.500
16.625
15.513
15.000
15.428
15.541
16.062
15.500
15.600
15.625
15.625
16.745
15.640
15.750
16.734
15.354
15.354
15.354
15.590
15.673
15.748
15.748
15.748
15.748
15.748
15.906
15.500
16.187
16.732
15.500
15.500
15.750
15.750
16.000
16.188
16.750
15.690
16.214

0.750
0.812
0.812
0.812
1.000
1.375
1.375
0.812
0.812
1.000
1.000
1.000
0.812
0.813
1.000
0.625
0.750
0.688
0.750
0.625
0.812
0.750
0.750
0.750
0.750
0.875
0.625
0.625
0.844
0.709
0.709
0.709
0.630
0.750
0.630
0.709
0.709
0.748
0.787
0.788
0.750
0.812
0.812
0.625
0.688
0.625
0.750
0.875
0.813
0.875
0.625
0.812

MODEL NO. PART NO.

59
21
23
64
53
53R1
53R2
62
64
26
53
59
64
59
53
59
23
26
23
23
23
23
23
23
59
59
23
23
59
23
26
59
23
23
53
26
59
23
59
87
23
21
64
53
59
53
59
59
59
59
23
23

24700-0217
25001-4135
25003-4135
21238-4135
21086-3725
22537-4888
22627-4888
21702-5382
21238-5382
24600-3726
21086-3726
24700-3726
21238-7535
24700-0218
21086-3727
24700-0219
25003-9287
24600-8815
25003-1883
25003-1865
25003-6778
25003-0480
25003-9512
25003-9687
24700-3003
24700-0220
25003-1287
25003-5815
24700-0221
25003-2066
24600-0992
24700-0992
25003-0963
25003-5846
21086-7849
24600-4394
24700-4394
25003-9182
24700-1892
26080-1202
25003-0241
25001-4614
21238-9280
21086-4114
24700-0222
21086-4117
24700-0223
24700-0224
24700-0225
24700-0226
25003-4138
25003-7898

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-106

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.250
14.344
14.344
14.370
14.370
14.375
14.375
14.375
14.375
14.375
14.375
14.375
14.375
14.394
14.438
14.484
14.484
14.488
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500

15.750
15.750
15.750
15.750
16.000
16.000
16.000
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.500
16.500
16.000
16.000
15.866
15.938
15.875
15.875
16.000
16.000
16.000
16.375
16.537
16.537
15.394
15.938
15.369
16.312
16.496
15.500
15.750
15.750
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.250
16.250
16.250
16.375
16.500
16.500

0.687
0.750
0.750
0.750
0.812
0.875
0.875
0.625
0.625
0.750
0.812
0.812
0.812
0.813
0.812
0.875
0.687
0.687
0.748
0.709
0.750
0.750
0.687
0.688
0.688
0.750
0.590
0.590
0.500
0.625
0.500
0.562
0.811
0.500
0.625
0.750
0.562
0.562
0.625
0.687
0.687
0.688
0.688
0.688
0.750
0.750
0.625
0.625
0.750
0.812
0.625
0.750

MODEL NO. PART NO.

64
21
23
59
23
21
59
26
87
23
21
23
64
59
64
59
88
88NS
23
59
23
59
64
26
59
23
88
88NS
23
23
23
23
87
23
23
23
88
88NS
23
53
64
23
59
87
21
23
23
59
53
23
23
23

21238-4118
25001-5062
25003-5062
24700-0227
25003-4691
25001-7573
24700-0228
24600-3891
26080-3891
25003-5117
25001-4140
25003-4140
21238-4140
24700-0229
21238-3855
24700-0230
26088-8664
26188-8664
25003-3250
24700-0231
25003-5946
24700-0232
21238-5481
24600-0233
24700-0233
25003-5134
26088-1924
26188-1924
25003-2700
25003-0785
25003-1632
25003-1631
26080-2134
25003-8741
25003-4699
25003-1018
26088-2676
26188-2676
25003-7149
21086-4142
21238-4142
25003-4142
24700-4142
26080-4142
25001-4143
25003-4143
25003-5455
24700-3866
21086-4144
25003-9495
25003-9116
25003-3728

SHAFT

BORE

WIDTH

14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.500
14.562
14.562
14.563
14.566
14.566
14.567
14.567
14.567
14.567
14.580
14.625
14.625
14.625
14.625
14.625
14.625
14.625
14.625
14.687
14.687
14.687
14.688
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750
14.750

16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.000
16.000
16.000
16.141
16.181
15.551
16.299
16.339
16.535
16.200
16.000
16.125
16.125
16.250
16.250
16.250
16.750
16.750
16.187
16.187
16.687
16.188
16.125
16.125
16.125
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.625
16.750

0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812
0.625
0.625
0.625
0.787
0.629
0.500
0.787
0.787
0.787
0.625
0.625
0.750
0.750
0.687
0.750
0.750
0.812
1.000
0.625
0.750
0.812
0.625
0.687
0.687
0.750
0.375
0.625
0.625
0.668
0.687
0.687
0.688
0.688
0.750
0.687
0.687
0.688
0.750
0.750
0.812
0.875
0.875
0.812
0.750

MODEL NO. PART NO.

53
59
62
23
62
64
88
88NS
26
53
59
26R1
23
23
59
59
23
23
59
23
59
64
23
59
64
59
23
23
23
59
21
23
23
23
23
59
21
21
64
23
59
23
23
64
59
23
62
23
88
88NS
23
23

21086-3728
24700-0234
21702-3728
25003-4145
21702-4145
21238-4145
26088-4145
26188-4145
24600-5987
21086-5987
24700-5987
24620-8196
25003-9993
25003-5845
24700-3880
24700-5694
25003-1968
25003-2026
24700-4555
25003-9732
24700-0235
21238-3856
25003-0756
24700-0236
21238-3857
24700-0237
25003-6283
25003-9494
25003-4756
24700-0238
25001-8888
25003-8888
25003-2067
25003-9959
25003-8119
24700-0239
25001-9696
25001-4147
21238-4147
25003-4147
24700-4147
25003-4148
25003-5990
21238-5990
24700-0240
25003-4149
21702-4149
25003-1617
26088-8794
26188-8794
25003-3149
25003-9254

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-107

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

14.750
14.760
14.764
14.810
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.875
14.906
14.906
14.937
14.950
14.960
14.960
14.961
14.961
14.961
14.961
14.961
14.961
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000

16.750
16.339
16.535
15.685
16.375
16.500
16.500
16.500
16.750
16.750
16.875
16.875
16.875
16.875
16.875
16.875
16.875
16.875
17.000
17.000
17.500
17.000
17.000
16.437
16.500
16.460
17.322
16.535
16.535
16.535
16.693
16.693
17.323
16.000
16.125
16.250
16.250
16.375
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.750
16.750
16.750
16.750

0.812
0.630
0.787
0.375
0.750
0.687
0.750
0.750
0.687
0.875
0.375
0.500
0.812
0.812
0.937
1.000
1.000
1.219
0.812
0.875
0.875
0.812
0.875
0.750
0.750
0.750
0.984
0.625
0.787
0.787
0.787
0.787
0.984
0.500
0.547
0.625
0.812
0.531
0.625
0.687
0.687
0.688
0.688
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812

Garlock

MODEL NO. PART NO.

23
23
59
23
23
64
23
59
64
59
23
23
21
23
64
53
59
53F1
64
59
59
64
59
23
23
23
26R1
23
23
59
23
59
59
23
23
23
23
23
87
53
64
23
59
21
23
24
25
53
23
53
59
23

25003-9591
25003-6994
24700-4423
25003-3262
25003-8281
21238-3858
25003-4414
24700-0241
21238-3859
24700-0242
25003-1454
25003-9163
25001-8271
25003-8271
21238-2622
21086-4150
24700-0243
22987-6846
21238-3860
24700-0244
24700-0245
21238-3861
24700-0246
25003-9896
25003-5475
25003-5801
24620-5466
25003-2328
25003-0614
24700-0247
25003-4601
24700-4674
24700-5466
25003-5508
25003-4970
25003-1175
25003-0662
25003-3091
26080-3326
21086-4151
21238-4151
25003-4151
24700-0248
25001-4152
25003-4152
25005-4152
25058-4152
21086-4152
25003-4153
21086-4153
24700-0249
25003-8123

SHAFT

BORE

WIDTH

15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.000
15.108
15.125
15.125
15.125
15.125
15.156
15.161
15.187
15.191
15.236
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250

16.772
16.875
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.250
17.250
17.500
17.500
17.500
17.500
17.500
17.500
17.750
17.750
16.750
16.125
16.750
17.125
17.125
17.156
16.885
17.187
16.191
16.417
16.250
16.375
16.625
16.750
16.750
16.750
16.750
16.750
16.750

1.125
0.750
0.500
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.875
1.000
1.187
1.250
1.250
1.312
1.312
1.375
1.375
0.812
0.875
0.812
0.875
0.938
0.938
1.250
1.250
0.812
0.875
0.750
0.375
0.750
0.625
0.750
0.812
0.812
0.750
0.500
0.591
0.500
1.250
0.531
0.687
0.687
0.688
0.688
0.750
0.750

MODEL NO. PART NO.

26R1
53
23
23
21
23
25
26
53
26R1
59
21
23
64
53
53
53F1
26R1
53R2
53R2
53T2
53R1
53R2
64
53
64
59
26
26R1
26
26R1
64
59
23
23
59
23
23
23
23
23
23
59
23
142
23
62
64
23
59
23
26

24620-5146
21086-4154
25003-4949
25003-9181
25001-4155
25003-4155
25058-4155
24600-4155
21086-4155
24620-4155
24700-4155
25001-4156
25003-4156
21238-4156
21086-3730
21086-3731
22987-8703
24620-6117
22627-6117
22627-4894
22897-4894
22537-6354
22627-6354
21238-8508
21086-5277
21238-9637
24700-0250
24600-3050
24620-3050
24600-1007
24620-1007
21238-3862
24700-0251
25003-3222
25003-9279
24700-0252
25003-6883
25003-9906
25003-6531
25003-1688
25003-7814
25003-0889
24700-5299
25003-1918
21432-2512
25003-8861
21702-4615
21238-4615
25003-4615
24700-0253
25003-7801
24600-7801

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-108

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.250
15.312
15.312
15.312
15.312
15.313
15.350
15.354
15.354
15.354
15.354
15.354
15.354
15.354
15.354
15.354
15.359
15.359
15.359
15.375
15.375
15.375
15.375
15.375
15.375
15.375
15.375
15.375
15.375
15.375
15.438
15.472
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500

17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
16.875
16.875
17.312
17.312
17.313
16.850
16.535
16.929
16.929
16.929
17.086
17.087
17.323
17.323
17.717
16.890
17.709
17.717
16.250
16.500
16.750
16.875
17.125
17.250
17.250
17.375
17.375
17.375
17.375
16.938
17.502
16.500
16.875
17.000
17.000
17.000
17.000
17.250
17.375
17.500

0.625
0.625
0.625
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.875
1.000
0.687
0.687
0.687
0.812
0.688
0.750
0.551
0.709
0.750
0.787
0.787
0.787
0.787
0.984
0.984
0.750
0.906
0.687
0.437
1.250
0.750
0.750
0.812
0.687
0.750
0.688
0.812
0.812
1.000
0.750
0.708
0.500
0.625
0.750
0.750
0.750
0.750
0.750
0.812
0.750

MODEL NO. PART NO.

23
88
88NS
21
23
59
88
88NS
23
64
53
53
23
64
64
23
59
23
23
59
23
26
23
59
59
59
59
23
59
64
23
142
23
23
23
64
59
59
23
64
53
23
59
23
59
21
23
26
59
23
23
23

25003-6618
26088-6618
26188-6618
25001-7539
25003-7539
24700-0254
26088-7539
26188-7539
25003-4476
21238-4476
21086-3734
21086-4157
25003-4158
21238-4158
21238-5992
25003-7708
24700-0255
25003-9796
25003-1608
24700-5172
25003-5290
24600-4941
25003-1767
24700-5281
24700-3950
24700-4936
24700-2049
25003-5718
24700-0256
21238-4166
25003-1293
21432-4753
25003-0450
25003-7239
25003-1013
21238-4167
24700-0257
24700-0258
25003-4159
21238-4159
21086-4160
25003-1449
24700-0259
25003-4625
24700-0260
25001-4162
25003-4162
24600-4162
24700-4162
25003-6562
25003-0432
25003-7431

SHAFT

BORE

WIDTH

15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.500
15.512
15.551
15.551
15.565
15.604
15.625
15.625
15.625
15.625
15.625
15.740
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.748
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750

17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.750
17.750
18.000
18.000
16.535
17.283
17.283
16.565
16.974
17.125
17.125
17.250
17.625
17.625
17.250
17.244
17.322
17.322
17.323
17.480
17.480
17.480
17.480
17.480
17.716
17.716
17.716
17.716
17.716
17.717
17.717
17.748
18.110
16.750
16.875
16.875
16.948
17.000
17.250
17.250
17.250
17.250
17.250
17.250
17.250

0.750
0.812
0.812
0.812
0.812
0.812
0.812
0.812
1.000
0.812
1.000
0.500
0.741
0.886
0.500
0.625
0.750
0.750
0.750
0.812
0.875
0.688
0.750
0.787
0.787
0.630
0.662
0.787
0.787
0.787
0.787
0.687
0.689
0.709
0.748
0.761
0.787
0.812
0.750
0.984
0.500
0.625
1.250
0.750
0.625
0.562
0.578
0.687
0.687
0.687
0.687
0.688

MODEL NO. PART NO.

59
21
23
59
64
88
88NS
64
59
64
59
23
26R1
26
23
59
23
59
23
23
59
59
23
26
59
59
23
23
26
59
87
64
59
23
59
59
23
23
23
26R1
23
23
142
23
59
23
23
64
87
88
88NS
59

24700-0261
25001-4163
25003-4163
24700-5421
21238-4163
26088-4163
26188-4163
21238-6771
24700-0262
21238-4168
24700-0263
25003-2206
24620-0979
24600-3867
25003-7592
24700-0264
25003-6455
24700-0265
25003-4494
25003-2619
24700-0266
24700-0267
25003-5666
24600-4396
24700-4396
24700-5064
25003-8702
25003-4629
24600-1332
24700-1332
26080-4629
21238-4169
24700-0268
25003-2389
24700-2726
24700-4429
25003-2069
25003-2275
25003-8713
24620-5467
25003-6873
25003-7091
21432-6430
25003-1992
24700-0269
25003-7858
25003-5530
21238-4170
26080-4170
26088-4170
26188-4170
24700-0270

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-109

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.750
15.784
15.785
15.812
15.875
15.875
15.875
15.875
15.875
15.875
15.937
15.937
15.938
15.938
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000
16.000

17.250
17.250
17.312
17.500
17.500
17.500
17.500
17.750
17.750
17.750
18.000
18.000
18.500
17.000
17.785
17.437
17.375
17.500
17.750
17.875
17.875
17.875
17.437
17.937
17.313
18.000
17.000
17.000
17.406
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.625
17.625
17.750
17.875
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000

0.750
0.750
0.687
0.687
0.688
0.750
0.812
0.687
0.812
0.875
0.812
0.875
1.000
0.500
0.812
0.812
0.750
0.750
0.875
0.750
0.812
0.812
0.750
0.750
0.625
0.750
0.500
0.750
0.609
0.687
0.687
0.687
0.688
0.750
0.750
0.750
0.750
0.750
0.687
0.750
0.750
0.750
0.500
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812

Garlock

MODEL NO. PART NO.

23
62
64
64
59
23
23
64
23
59
64
59
64
23
23
23
23
59
21
59
23
64
23
23
59
59
23
142
23
53
64
87
59
21
23
25
26
53
64
59
23
23
24
23
59
88
88NS
21
23
26
59
64

25003-9595
21702-9595
21238-9271
21238-4171
24700-0271
25003-7442
25003-5865
21238-6874
25003-6769
24700-0273
21238-4172
24700-0274
21238-4175
25003-0800
25003-6353
25003-8847
25003-4664
24700-2493
25001-4795
24700-0275
25003-4176
21238-4176
25003-1439
25003-7425
24700-0276
24700-2022
25003-9077
21432-7536
25003-7601
21086-4177
21238-4177
26080-4177
24700-0277
25001-4178
25003-4178
25058-4178
24600-4178
21086-4178
21238-4173
24700-0278
25003-6821
25003-1032
25005-6693
25003-5116
24700-0279
26088-5116
26188-5116
25001-4180
25003-4180
24600-4180
24700-4180
21238-4180

SHAFT

BORE

WIDTH

16.000
16.000
16.000
16.000
16.000
16.000
16.062
16.094
16.110
16.125
16.125
16.125
16.141
16.142
16.142
16.142
16.187
16.187
16.225
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.250
16.299
16.339
16.350
16.375

18.000
18.000
18.000
18.000
18.500
18.500
17.062
17.500
18.110
17.125
18.125
18.125
18.141
17.142
17.717
18.110
17.437
18.187
17.725
17.250
17.250
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.250
18.250
18.250
18.250
18.250
18.500
18.500
18.500
18.268
18.307
17.350
17.375

0.875
0.875
0.875
1.000
0.812
0.813
0.500
0.750
0.787
0.500
0.750
0.812
0.812
0.750
0.787
0.866
0.750
0.812
0.750
0.500
0.750
0.625
0.680
0.687
0.687
0.687
0.687
0.687
0.687
0.750
0.750
1.281
1.281
0.625
0.687
0.750
0.750
0.750
0.812
1.000
0.687
0.750
0.812
0.812
1.000
0.812
0.812
1.250
0.812
0.787
0.500
0.500

MODEL NO. PART NO.

26
64
87
53
64
59
23
23
23
23
23
23
23
142
59
26
23
23
23
23
142
59
26
23
53
59
64
88
88NS
23
53
53R2
53T2
59
64
23
53
64
23
53
64
23
21
23
59
59
64
59
23
59
23
23

24600-5077
21238-5077
26080-5077
21086-3736
21238-5995
24700-0281
25003-5599
25003-0479
25003-2808
25003-5867
25003-6878
25003-5819
25003-5803
21432-9816
24700-4512
24600-4015
25003-2491
25003-9484
25003-9286
25003-5039
21432-8556
24700-0282
24600-5120
25003-4181
21086-4181
24700-1020
21238-4181
26088-4181
26188-4181
25003-4182
21086-4182
22627-4650
22897-4650
24700-0283
21238-8217
25003-4184
21086-4184
21238-4184
25003-9285
21086-3737
21238-9892
25003-6657
25001-6397
25003-6397
24700-0284
24700-3042
21238-4174
24700-0285
25003-1280
24700-4002
25003-9296
25003-6984

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-110

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

16.375
16.375
16.375
16.375
16.375
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.500
16.530
16.531
16.531
16.535
16.535
16.535
16.535
16.535
16.535
16.535
16.535
16.535
16.535
16.625
16.625
16.625
16.625
16.687
16.733
16.750
16.750
16.750
16.750

17.875
17.875
17.875
18.375
18.375
17.500
17.750
17.750
17.750
17.875
18.000
18.000
18.000
18.000
18.250
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
19.000
19.000
17.854
18.031
18.504
17.913
18.035
18.102
18.110
18.110
18.504
18.504
18.504
18.897
18.898
17.625
18.125
18.500
18.625
18.031
18.700
17.875
18.000
18.250
18.250

0.687
0.750
0.750
0.812
1.000
0.500
0.750
0.750
0.750
0.750
0.687
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.812
0.812
0.875
1.000
0.812
0.875
0.500
0.750
0.866
0.787
0.750
0.787
0.787
0.787
0.741
0.750
0.875
0.984
1.102
0.500
0.750
0.750
0.812
0.750
0.788
1.312
0.750
0.687
0.687

MODEL NO. PART NO.

64
23
59
23
59
23
23
26
59
23
64
23
53
59
59
23
25
53
59
23
59
62
64
88
88NS
21
53
64
59
23
23
59
23
23
59
23
59
23
23
64
26R1
26R1
23
23
23
23
26
23
142
23
59
64

21238-4179
25003-5178
24700-0286
25003-9757
24700-0287
25003-5747
25003-3868
24600-3868
24700-3868
25003-2781
21238-9863
25003-4185
21086-4185
24700-0289
24700-0290
25003-6697
25058-6697
21086-6697
24700-0291
25003-4186
24700-2565
21702-4186
21238-4186
26088-4186
26188-4186
25001-5038
21086-3738
21238-4183
24700-0293
25003-2640
25003-5725
24700-1331
25003-2625
25003-7127
24700-0294
25003-8504
24700-0295
25003-8705
25003-4521
21238-1929
24620-5468
24620-1038
25003-5827
25003-8981
25003-2944
25003-6601
24600-3635
25003-9529
21432-7886
25003-3223
24700-0296
21238-3744

SHAFT

BORE

WIDTH

16.750
16.750
16.750
16.750
16.750
16.750
16.750
16.750
16.875
16.929
16.929
16.929
16.929
16.929
16.929
16.929
16.937
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000
17.000

18.250
18.500
18.500
18.750
18.750
18.750
19.000
19.000
18.875
17.929
18.429
18.504
18.504
18.897
18.898
18.903
19.291
17.906
18.000
18.125
18.125
18.125
18.250
18.250
18.250
18.250
18.250
18.250
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.750
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.250
19.250

0.750
0.687
0.875
0.750
0.750
0.812
0.812
0.875
0.812
0.500
0.750
0.787
0.787
0.787
0.866
0.969
0.812
0.500
0.500
0.547
0.547
0.562
0.500
0.562
0.625
0.625
0.625
0.750
0.625
0.625
0.687
0.687
0.687
0.687
0.687
0.720
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.812
0.812
0.812
0.812
0.875
1.000
0.812
1.000

MODEL NO. PART NO.

23
59
59
21
23
23
64
59
23
23
23
23
59
23
59
59
64
23
23
21
23
23
23
21
23
26
59
23
23
59
23
59
64
88
88NS
23
21
23
25
59
26
23
59
87
23
59
62
64
21
59
64
59

25003-8295
24700-4534
24700-0297
25001-6398
25003-6398
25003-9752
21238-3748
24700-0298
25003-9303
25003-6933
25003-5850
25003-4510
24700-4252
25003-5029
24700-3740
24700-0299
21238-9695
25003-1126
25003-1976
25001-4971
25003-4971
25003-9114
25003-3247
25001-8423
25003-8780
24600-3793
24700-3793
25003-1923
25003-2683
24700-0300
25003-4188
24700-4188
21238-4188
26088-4188
26188-4188
25003-1459
25001-4189
25003-4189
25058-4189
24700-3741
24600-4977
25003-5168
24700-0301
26080-5168
25003-4190
24700-1867
21702-4190
21238-4190
25001-4712
24700-0782
21238-4191
24700-0302

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-111

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

17.000
17.000
17.125
17.125
17.125
17.126
17.190
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.250
17.313
17.322
17.322
17.323
17.323
17.323
17.323
17.332
17.360
17.375
17.400
17.406
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500
17.500

19.500
19.500
18.125
18.625
19.125
19.094
19.190
18.500
18.750
18.750
18.750
18.750
18.750
19.250
19.250
19.250
19.250
19.250
18.313
18.822
18.897
18.898
18.898
19.291
19.323
18.832
19.360
18.875
19.400
18.406
18.500
18.625
18.650
18.750
18.906
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.250
19.250
19.250
19.250
19.250
19.500
19.500
19.500
19.500

0.812
0.875
0.500
0.750
0.812
0.787
0.812
0.625
0.625
0.687
0.750
0.750
0.750
0.750
0.812
0.875
0.937
0.938
0.500
0.750
0.787
0.787
0.787
0.866
0.750
0.750
0.812
0.750
0.812
0.500
0.500
1.250
0.531
0.500
0.766
0.625
0.625
0.687
0.687
0.750
0.750
0.750
0.812
0.625
0.687
0.688
0.750
0.750
0.687
0.687
0.688
0.688

Garlock

MODEL NO. PART NO.

64
59
23
23
23
87
23
23
23
64
23
59
64
23
23
26
53
59
23
23
26
23
59
59
23
23
23
23
23
23
23
142
23
23
23
23
59
53
64
23
53
62
23
23
64
59
23
53
59
64
23
59

21238-3750
24700-0304
25003-9273
25003-6626
25003-5983
26080-1387
25003-4588
25003-1125
25003-4663
21238-3751
25003-6967
24700-0305
21238-6967
25003-5877
25003-8191
24600-3055
21086-4192
24700-0306
25003-4374
25003-6812
24600-4393
25003-4393
24700-4393
24700-4673
25003-0620
25003-9315
25003-4351
25003-9338
25003-2499
25003-7043
25003-9261
21432-4716
25003-4376
25003-2021
25003-2018
25003-4403
24700-0307
21086-4194
21238-4194
25003-4195
21086-4195
21702-4195
25003-4589
25003-8476
21238-5054
24700-5054
25003-4196
21086-4196
24700-4198
21238-4198
25003-4198
24700-0309

SHAFT

BORE

WIDTH

17.500
17.500
17.500
17.500
17.500
17.525
17.559
17.559
17.562
17.625
17.625
17.625
17.625
17.625
17.625
17.625
17.625
17.625
17.687
17.716
17.716
17.716
17.717
17.717
17.717
17.717
17.719
17.719
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.750
17.795
17.818
17.818
17.874
17.875
17.875
17.875
17.875
17.875
17.900
17.938
17.992

19.500
19.500
19.750
19.750
20.522
18.525
19.135
19.135
19.062
18.500
19.125
19.250
19.250
19.375
19.375
19.625
19.625
19.625
19.187
19.291
19.685
19.716
18.898
19.409
19.685
20.079
18.901
19.219
18.750
19.000
19.250
19.373
19.750
19.750
19.750
19.750
19.750
20.078
20.089
20.089
19.795
19.750
20.500
19.874
18.875
19.500
19.875
19.875
19.875
19.400
19.313
20.000

0.750
0.812
0.750
0.812
1.500
0.500
0.630
0.630
0.750
0.375
0.750
0.687
0.688
0.750
0.750
0.687
0.688
0.812
1.000
0.787
0.812
0.812
0.500
0.787
0.811
0.984
0.578
0.750
0.500
0.750
0.750
0.750
0.750
0.812
0.812
1.000
1.000
0.875
1.000
1.000
0.812
0.750
1.000
0.843
0.500
0.625
0.750
0.812
0.812
0.750
0.812
0.748

MODEL NO. PART NO.

23
23
59
64
59
23
88
88NS
23
23
59
64
59
23
59
64
59
23
142
59
23
23
23
23
21
59
23
23
23
23
23
23
59
23
64
25
53
64
53
59
23
59
59
59
23
59
59
23
64
23
23
26R1

25003-7625
25003-9601
24700-0310
21238-4197
24700-0311
25003-7589
26088-4704
26188-4704
25003-5534
25003-5172
24700-0312
21238-4199
24700-0313
25003-1158
24700-0314
21238-6850
24700-0315
25003-9421
21432-2015
24700-3943
25003-1179
25003-9479
25003-0510
25003-9925
25001-3111
24700-5464
25003-5964
25003-5594
25003-9581
25003-4523
25003-6615
25003-0477
24700-0316
25003-4200
21238-4200
25058-4201
21086-4201
21238-9084
21086-4202
24700-0317
25003-4667
24700-0318
24700-0319
24700-4600
25003-4815
24700-0320
24700-0321
25003-4204
21238-4204
25003-5613
25003-0716
24620-2135

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-112

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.000
18.031
18.062
18.110
18.110
18.110
18.110
18.110
18.110

19.000
19.125
19.438
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.625
19.750
19.750
19.750
19.750
19.750
19.875
19.875
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.250
20.250
20.500
20.500
20.500
21.000
21.000
20.031
20.062
19.685
19.843
20.078
20.078
20.079
20.110

0.500
1.250
0.500
0.687
0.687
0.688
0.688
0.750
0.750
0.750
0.750
0.750
0.750
0.812
1.000
1.250
0.812
0.687
0.750
0.750
0.812
0.812
0.687
0.750
0.625
0.750
0.750
0.750
0.812
0.812
0.875
0.875
0.875
1.000
1.000
1.750
1.812
0.812
1.000
0.812
0.875
1.250
0.688
0.875
0.812
0.812
0.787
0.787
0.787
0.866
0.866
0.812

MODEL NO. PART NO.

23
142
23
53
64
23
59
23
23
25
53
59
62
23
142
53R2
21
64
21
59
21
23
64
59
26
23
59
64
21
23
64
88
88NS
26
53
53R2
53T2
21
53
25
64
59
59
64
23
23
59
23
23
59
26
23

25003-7487
21432-5147
25003-2193
21086-4206
21238-4206
25003-4206
24700-0322
25003-2741
25003-3741
25058-3741
21086-3741
24700-2691
21702-3741
25003-8691
21432-7615
22627-7404
25001-6938
21238-5728
25001-4207
24700-0323
25001-7413
25003-7413
21238-4203
24700-0324
24600-0983
25003-4209
24700-0325
21238-4209
25001-6399
25003-6399
21238-4210
26088-4210
26188-4210
24600-3742
21086-3742
22627-9423
22897-6793
25001-9083
21086-7664
25058-6974
21238-3752
24700-0326
24700-0327
21238-3753
25003-5432
25003-5769
24700-4508
25003-0518
25003-1237
24700-4486
24600-4486
25003-5431

SHAFT

BORE

WIDTH

18.120
18.120
18.125
18.125
18.125
18.125
18.250
18.250
18.250
18.250
18.250
18.250
18.250
18.250
18.250
18.250
18.250
18.250
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.375
18.437
18.449
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.500
18.504

20.500
20.500
19.625
19.750
20.500
20.500
19.375
19.750
19.750
19.750
19.750
19.867
19.875
19.875
19.875
19.875
20.250
20.250
19.875
19.875
19.875
19.875
19.937
19.938
20.000
20.000
20.375
20.375
20.375
20.500
20.500
20.500
19.449
19.500
19.625
19.875
20.000
20.000
20.000
20.250
20.250
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.472

0.875
1.000
0.750
0.750
0.875
1.000
1.250
0.687
0.750
0.750
0.750
1.000
0.687
0.750
0.750
1.000
0.812
0.812
0.687
0.687
0.688
0.750
0.687
0.625
0.750
0.750
0.812
0.812
0.875
0.750
0.875
0.812
0.500
0.500
1.250
0.750
0.687
0.750
0.750
0.687
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.875
0.875
0.875
1.000
0.741

MODEL NO. PART NO.

64
59
23
23
64
59
142
64
21
23
59
59
64
21
23
59
23
26
23
64
59
23
64
59
59
64
23
64
59
64
59
21
23
23
142
23
64
23
59
64
59
23
26
26R1
59
23
25
59
62
64
25
23

21238-3754
24700-0328
25003-5680
25003-1115
21238-3756
24700-0329
21432-8440
21238-3757
25001-4211
25003-4211
24700-0330
24700-0331
21238-3765
25001-4212
25003-4212
24700-0332
25003-7618
24600-7618
25003-4213
21238-4213
24700-0333
25003-6132
21238-7103
24700-0334
24700-0335
21238-4215
25003-6740
21238-6740
24700-0336
21238-3767
24700-0337
25001-2087
25003-2697
25003-5820
21432-6737
25003-7700
21238-3768
25003-9881
24700-0338
21238-3772
24700-0339
25003-7059
24600-7059
24620-7059
24700-7059
25003-6408
25058-6408
24700-4216
21702-4216
21238-4216
25058-3745
25003-8695

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-113

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

18.504
18.562
18.625
18.625
18.750
18.750
18.750
18.750
18.750
18.750
18.750
18.750
18.750
18.750
18.750
18.750
18.818
18.875
18.897
18.898
18.897
18.898
18.898
18.898
18.898
18.937
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.000
19.125
19.125
19.125
19.187
19.188

20.866
19.562
19.875
20.625
19.750
20.250
20.250
20.250
20.250
20.250
20.250
20.500
20.750
20.750
20.750
20.750
20.818
20.875
20.464
20.472
20.472
20.472
20.866
20.866
20.867
20.937
20.000
20.125
20.204
20.500
20.500
20.500
20.500
20.500
20.500
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.500
21.500
21.500
20.125
21.125
21.125
21.187
20.938

0.984
0.500
0.750
0.812
0.500
0.500
0.750
0.750
0.812
0.812
1.000
0.750
0.750
0.750
0.812
0.875
0.812
0.812
0.787
0.787
0.787
0.787
0.787
0.787
0.812
0.812
0.500
0.547
0.531
0.750
0.750
0.750
0.750
0.750
0.750
0.500
0.750
0.812
0.812
0.812
0.812
0.875
0.875
0.875
0.750
0.875
0.875
0.500
0.812
0.812
0.812
0.625

Garlock

MODEL NO. PART NO.

59
23
23
23
23
23
23
59
21
23
142
59
59
142
23
62
23
23
59
23
64
26
23
59
23
23
23
23
23
23
59
64
87
88
88NS
23
23
21
23
25
59
59
62
64
59
23
64
23
23
59
23
23

24700-4255
25003-5506
25003-6305
25003-5130
25003-9979
25003-2337
25003-4217
24700-0340
25001-9477
25003-9477
21432-7607
24700-0341
24700-0343
21432-9561
25003-9940
21702-7225
25003-9492
25003-9742
24700-0344
25003-7281
21238-7281
24600-7281
25003-8299
24700-1247
25003-0639
25003-5099
25003-5158
25003-4673
25003-9644
25003-4218
24700-0345
21238-4218
26080-4218
26088-4218
26188-4218
25003-4741
25003-9115
25001-6508
25003-6508
25058-6508
24700-6508
24700-0346
21702-4219
21238-4219
24700-0347
25003-3773
21238-3773
25003-5271
25003-8719
24700-4879
25003-9349
25003-4493

SHAFT

BORE

WIDTH

19.188
19.250
19.250
19.250
19.250
19.250
19.250
19.250
19.250
19.250
19.250
19.291
19.291
19.291
19.375
19.375
19.375
19.375
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.500
19.606
19.625
19.625
19.625
19.625
19.625
19.625
19.674
19.685
19.685
19.685
19.685
19.685
19.685
19.687
19.687

20.938
20.250
20.750
20.750
20.750
21.000
21.000
21.000
21.250
21.250
21.250
20.866
21.260
21.260
20.375
21.000
21.000
21.375
20.500
21.000
21.000
21.000
21.250
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.688
21.688
21.750
21.575
21.079
21.080
21.125
21.375
21.625
21.625
21.674
20.866
21.260
21.457
21.654
21.654
21.685
21.187
21.673

0.625
0.500
0.750
0.750
0.750
0.750
0.750
0.812
0.750
0.750
0.812
0.787
0.787
0.866
0.500
0.750
0.813
0.812
0.500
0.750
0.750
0.750
0.813
0.500
0.625
0.750
0.750
0.750
0.750
0.812
0.812
0.875
0.875
0.750
0.875
0.875
0.812
0.531
0.500
0.500
0.750
0.812
0.812
0.812
0.590
0.787
0.787
0.787
0.866
0.812
0.750
0.812

MODEL NO. PART NO.

23
23
23
59
64
59
64
23
59
64
23
59
23
26
23
59
59
23
23
23
59
64
23
23
23
59
87
88
88NS
21
23
26
64
59
64
59
23
23
23
23
23
23
59
23
26
59
23
87
59
23
23
23

25003-9943
25003-2728
25003-4617
24700-0348
21238-4617
24700-0349
21238-3777
25003-4225
24700-0350
21238-5485
25003-6079
24700-3133
25003-1298
24600-4856
25003-4535
24700-5079
24700-0352
25003-9734
25003-5262
25003-3779
24700-0354
21238-3779
25003-5699
25003-4739
25003-1376
24700-0355
26080-6980
26088-6980
26188-6980
25001-8446
25003-8446
24600-4221
21238-4221
24700-0356
21238-3783
24700-4646
25003-6791
25003-0753
25003-2620
25003-1780
25003-1773
25003-4678
24700-2654
25003-1991
24600-2504
24700-4047
25003-2484
26080-1383
24700-1246
25003-8634
25003-5904
25003-1866

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-114

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

19.688
19.750
19.750
19.750
19.750
19.750
19.750
19.750
19.750
19.750
19.875
19.875
19.875
19.881
19.937
19.937
19.938
19.938
19.938
19.938
19.983
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.000
20.032
20.062

21.688
20.750
21.250
21.750
21.750
21.750
21.750
22.125
22.250
22.250
21.875
22.000
22.000
21.881
21.187
21.687
21.500
21.500
21.688
21.688
21.125
20.938
21.000
21.125
21.250
21.250
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.750
21.750
21.750
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.125
22.125
22.500
22.500
21.654
22.062

0.812
0.500
0.750
0.812
0.812
0.875
0.875
0.875
0.875
0.875
0.812
0.875
0.875
0.812
0.625
0.625
0.750
0.750
0.625
0.750
0.625
0.500
0.500
1.250
0.625
0.625
0.625
0.625
0.687
0.750
0.750
0.750
0.875
0.750
0.750
0.812
0.625
0.625
0.750
0.750
0.812
0.875
0.875
1.000
1.000
1.812
1.000
1.000
0.875
0.875
0.812
0.812

MODEL NO. PART NO.

23
23
23
21
23
59
64
64
59
64
23
59
64
23
23
64
59
64
59
59
26
23
23
142
23
59
23
59
59
23
59
64
59
59
64
23
59
87
23
59
23
59
64
53
59
53T2
53
59
59
64
23
23

25003-2439
25003-4525
25003-1038
25001-6426
25003-6426
24700-0357
21238-4228
21238-7400
24700-0358
21238-3785
25003-5291
24700-0359
21238-3788
25003-5849
25003-8848
21238-4233
24700-0360
21238-3789
24700-3220
24700-1989
24600-2511
25003-2322
25003-8421
21432-7706
25003-2505
24700-3539
25003-3057
24700-0362
24700-2229
25003-4235
24700-1013
21238-4235
24700-2126
24700-0363
21238-4236
25003-4230
24700-4231
26080-4231
25003-7212
24700-1977
25003-6400
24700-9477
21238-4237
21086-3749
24700-2981
22897-8597
21086-4238
24700-0364
24700-0365
21238-3790
25003-7446
25003-9801

SHAFT

BORE

WIDTH

20.078
20.079
20.111
20.125
20.125
20.143
20.187
20.236
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.250
20.276
20.375
20.437
20.438
20.438
20.458
20.469
20.470
20.472
20.472
20.472
20.472
20.477
20.495
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500
20.500

22.078
21.260
22.111
22.125
22.125
22.250
22.187
22.236
21.250
21.750
21.750
21.750
21.750
21.750
22.245
22.250
22.250
22.250
22.375
22.375
22.500
22.500
21.850
22.188
22.062
22.500
22.500
21.458
21.969
22.470
21.972
22.205
22.205
22.244
21.477
21.495
21.500
21.500
21.500
22.000
22.000
22.000
22.000
22.250
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500

0.812
0.433
0.812
0.750
0.812
0.875
0.812
0.812
0.500
0.750
0.750
0.750
0.750
0.750
0.875
0.812
0.875
0.875
0.750
1.000
0.875
0.875
0.787
0.812
0.812
0.750
0.812
0.375
0.750
0.812
0.750
0.787
0.866
0.812
0.375
0.375
0.469
0.469
0.500
0.625
0.750
0.750
0.750
0.812
0.625
0.750
0.812
0.812
0.875
0.875
0.875
0.875

MODEL NO. PART NO.

23
26
23
23
23
64
23
23
23
23
59
64
88
88NS
64
23
59
64
64
59
59
64
26
23
23
59
64
23
23
23
23
59
59
23
23
23
23
26
23
23
23
59
64
64
59
59
21
23
59
64
88
88NS

25003-5802
24600-5714
25003-1181
25003-6718
25003-6710
21238-3792
25003-7195
25003-7822
25003-9478
25003-4239
24700-0366
21238-4239
26088-4239
26188-4239
21238-8231
25003-4926
24700-0367
21238-4240
21238-4241
24700-0368
24700-0369
21238-8770
24600-5493
25003-2652
25003-7243
24700-0370
21238-4242
25003-9987
25003-5654
25003-0935
25003-6830
24700-4764
24700-4525
25003-7196
25003-9985
25003-9983
25003-9859
24600-2822
25003-8869
25003-2653
25003-4619
24700-0371
21238-4619
21238-4245
24700-0372
24700-1990
25001-5055
25003-5055
24700-4246
21238-4246
26088-4246
26188-4246

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-115

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

20.500
20.516
20.625
20.625
20.625
20.750
20.750
20.750
20.750
20.750
20.750
20.750
20.750
20.750
20.750
20.750
20.827
20.866
20.866
20.866
20.866
20.866
20.866
20.866
20.866
20.866
20.866
20.875
20.875
20.875
20.875
20.939
20.945
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000
21.000

22.750
22.516
22.625
22.625
22.625
22.250
22.750
22.750
22.750
22.750
22.750
22.750
22.750
22.750
23.000
23.000
22.827
22.441
22.441
22.637
22.835
22.835
22.835
22.836
22.836
22.866
23.228
22.875
22.875
22.875
23.228
22.939
22.520
22.000
22.000
22.500
22.500
22.500
22.750
22.750
22.750
22.750
22.760
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.250

0.875
0.812
0.812
0.812
0.812
0.750
0.750
0.812
0.875
0.875
0.875
0.875
1.000
1.750
0.812
0.875
0.812
0.787
0.787
0.812
0.787
0.866
0.866
0.787
0.812
0.812
0.984
0.750
0.812
0.875
0.875
0.812
0.787
0.500
0.500
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.625
0.750
0.750
0.750
0.750
0.812
0.812
0.875
0.812

Garlock

MODEL NO. PART NO.

64
23
21
23
64
23
59
23
59
64
88
88NS
53
53R2
64
59
23
59
87
23
23
26
59
59
64
23
59
59
23
64
64
23
59
21
23
23
59
64
21
23
59
64
23
59
23
59
88
88NS
23
64
64
64

21238-6287
25003-5708
25001-9893
25003-9893
21238-9893
25003-0839
24700-0373
25003-7148
24700-3773
21238-4248
26088-4248
26188-4248
21086-4249
22627-4491
21238-4243
24700-0374
25003-9392
24700-5438
26080-2388
25003-5761
25003-1911
24600-3667
24700-3667
24700-0375
21238-4244
25003-9744
24700-3535
24700-0377
25003-9276
21238-4250
21238-6417
25003-3088
24700-5440
25001-4940
25003-4940
25003-5259
24700-0380
21238-5259
25001-5312
25003-5312
24700-0381
21238-5312
25003-2775
24700-0382
25003-5619
24700-1991
26088-5619
26188-5619
25003-6535
21238-6535
21238-4253
21238-4251

SHAFT

BORE

WIDTH

21.000
21.000
21.000
21.063
21.125
21.250
21.250
21.250
21.250
21.250
21.250
21.250
21.250
21.250
21.250
21.250
21.250
21.259
21.260
21.260
21.260
21.260
21.375
21.437
21.438
21.456
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.500
21.625
21.625
21.625
21.625
21.625
21.625

23.250
23.500
23.500
22.638
22.125
22.250
22.637
22.750
23.000
23.250
23.250
23.250
23.250
23.250
23.250
23.250
23.250
22.759
23.228
23.228
23.228
23.260
23.375
23.437
23.188
23.456
22.625
22.688
22.750
23.000
23.000
23.000
23.250
23.250
23.250
23.500
23.500
23.500
23.500
23.500
23.500
23.500
23.625
23.750
24.000
24.000
23.375
23.375
23.625
23.625
23.625
23.625

0.875
0.875
0.875
0.787
0.500
0.500
0.590
0.750
0.750
0.625
0.750
0.750
0.812
0.875
0.875
0.875
0.875
0.687
0.812
0.866
0.984
0.812
0.812
0.812
0.750
0.812
1.250
0.750
0.750
0.625
0.750
1.000
0.750
0.750
0.812
0.500
0.750
0.750
0.812
0.812
0.812
0.875
0.875
0.875
0.875
0.875
0.750
0.750
0.812
0.875
0.875
1.000

MODEL NO. PART NO.

59
59
64
59
23
23
23
23
59
59
23
59
23
59
64
88
88NS
23
23
59
64
23
23
23
59
23
142
59
23
23
23
142
59
64
23
24
23
59
21
23
64
64
64
64
59
64
59
64
23
59
64
53

24700-0384
24700-0385
21238-9772
24700-5452
25003-3760
25003-8946
25003-0483
25003-5795
24700-0386
24700-0387
25003-2058
24700-1992
25003-9391
24700-4254
21238-4254
26088-4254
26188-4254
25003-5740
25003-9639
24700-4598
21238-7393
25003-9312
25003-5302
25003-6542
24700-0824
25003-5668
21432-9698
24700-1993
25003-6807
25003-6853
25003-5768
21432-9873
24700-0390
21238-4257
25003-5550
25005-9035
25003-9907
24700-0391
25001-7407
25003-7407
21238-7407
21238-4259
21238-6493
21238-0569
24700-0392
21238-6779
24700-0394
21238-4261
25003-5936
24700-0395
21238-4263
21086-4264

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-116

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

21.653
21.654
21.654
21.654
21.687
21.691
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.750
21.811
21.875
21.882
21.890
21.937
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.000
22.047

23.153
23.622
23.622
24.016
23.187
23.691
23.250
23.250
23.250
23.250
23.750
23.750
23.750
23.750
23.750
24.000
24.000
24.250
24.250
24.500
24.750
24.750
23.386
23.875
23.732
23.858
22.937
23.000
23.125
23.125
23.125
23.500
23.500
23.500
23.500
23.500
23.500
23.750
23.750
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.250
24.250
24.250
24.500
24.500
23.780

0.750
0.866
0.925
0.984
0.750
0.812
0.750
0.750
0.750
1.000
0.750
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
1.000
0.787
0.812
0.866
0.812
0.500
0.500
0.500
0.547
1.250
0.500
0.750
0.750
0.750
0.750
1.000
0.812
0.875
0.750
0.812
0.812
0.875
0.875
0.875
0.875
0.812
0.875
1.000
0.875
0.875
0.709

MODEL NO. PART NO.

23
59
26
59
23
23
23
59
64
142
59
23
64
88
88NS
59
64
59
64
64
64
59
23
23
26
23
21
23
23
21
142
21
26
26R1
59
64
142
23
59
59
21
23
59
64
88
88NS
64
64
59
59
64
87

25003-5258
24700-2724
24600-5492
24700-4514
25003-5428
25003-9864
25003-4621
24700-1994
21238-4621
21432-4859
24700-0397
25003-6972
21238-4265
26088-4265
26188-4265
24700-0398
21238-5276
24700-0399
21238-8675
21238-4260
21238-4262
24700-0400
25003-0429
25003-8658
24600-5491
25003-0606
25001-8381
25003-7131
25003-0676
25001-8208
21432-9872
25001-6296
24600-4269
24620-4269
24700-4269
21238-4269
21432-6796
25003-6291
24700-3256
24700-0401
25001-6401
25003-6401
24700-1135
21238-4270
26088-4270
26188-4270
21238-9082
21238-3763
24700-0402
24700-0403
21238-6295
26080-1382

SHAFT

BORE

WIDTH

22.047
22.047
22.047
22.047
22.047
22.047
22.047
22.047
22.062
22.125
22.125
22.250
22.250
22.250
22.250
22.250
22.320
22.375
22.375
22.375
22.375
22.375
22.375
22.375
22.437
22.437
22.437
22.437
22.437
22.438
22.438
22.441
22.441
22.441
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.500
22.598
22.625
22.625

23.780
24.016
24.016
24.016
24.016
24.016
24.016
24.409
24.062
23.875
24.125
24.250
24.250
24.250
24.250
24.250
24.320
24.250
24.250
24.368
24.375
24.375
25.250
25.250
24.000
24.250
24.437
24.437
24.500
24.250
24.438
24.016
24.409
24.409
23.375
23.500
23.688
24.000
24.250
24.250
24.495
24.500
24.500
24.500
24.500
24.500
24.750
24.750
25.000
23.779
24.125
24.625

0.787
0.787
0.787
0.787
0.866
0.866
0.875
0.984
0.812
0.750
0.812
0.812
0.875
0.875
0.875
0.875
0.812
0.750
0.750
0.875
0.875
0.875
0.875
1.125
0.750
0.750
0.750
0.875
0.750
0.750
0.875
0.787
0.866
0.984
0.375
0.500
0.750
0.750
0.750
0.750
0.875
0.750
0.812
0.812
0.875
0.875
0.875
0.875
0.875
0.590
0.500
0.812

MODEL NO. PART NO.

59
26
59
64
26
59
64
59
23
53
23
23
59
64
88
88NS
23
59
64
59
59
64
59
59
64
64
64
64
64
59
59
59
59
59
23
23
59
64
59
64
59
59
21
23
23
64
59
64
64
26
23
23

24700-4066
24600-3461
24700-3461
21238-7266
24600-4019
24700-4019
21238-2394
24700-4243
25003-6191
21086-4609
25003-5254
25003-8512
24700-0404
21238-3764
26088-3764
26188-3764
25003-4863
24700-0405
21238-4268
24700-0406
24700-0407
21238-2576
24700-3369
24700-5377
21238-4275
21238-4276
21238-6480
21238-1915
21238-9840
24700-0408
24700-0409
24700-3769
24700-4245
24700-4241
25003-1305
25003-1224
24700-1995
21238-4271
24700-0411
21238-4272
24700-0412
24700-0413
25001-7489
25003-7489
25003-4279
21238-4279
24700-0414
21238-4273
21238-4274
24600-2501
25003-0506
25003-7356

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-117

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

22.673
22.687
22.750
22.750
22.750
22.750
22.750
22.750
22.750
22.750
22.750
22.750
22.750
22.812
22.812
22.834
22.834
22.835
22.875
22.875
22.875
22.937
22.958
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.000
23.067
23.074
23.110
23.125
23.187
23.228
23.228
23.250
23.250
23.250
23.250
23.250

24.173
24.562
23.875
24.500
24.750
24.750
24.750
24.750
24.750
25.000
25.000
25.500
25.500
24.312
24.812
24.334
24.834
25.197
23.750
24.000
24.875
24.937
24.958
24.000
24.250
24.500
24.500
24.750
24.750
25.000
25.000
25.000
25.000
25.000
25.375
25.375
25.500
25.500
25.500
25.500
24.954
24.954
24.610
24.625
25.187
24.803
25.197
24.750
25.000
25.250
25.250
25.250

0.750
0.750
1.375
0.750
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.812
0.750
0.812
0.984
0.375
1.312
0.812
0.812
0.812
0.500
0.750
0.750
0.750
0.750
0.750
0.812
0.812
0.875
0.875
1.687
0.875
0.875
0.875
0.875
0.875
1.000
0.812
0.812
0.750
0.618
0.812
0.787
0.787
0.750
0.750
0.750
0.750
0.812

Garlock

MODEL NO. PART NO.

23
23
142
59
23
53
59
64
87
59
64
59
87
23
23
23
23
59
23
142
23
23
23
23
23
59
64
59
64
21
23
59
64
53R2
59
64
59
64
87
87
23
23
23
23
23
59
23
23
59
23
59
23

25003-5532
25003-6736
21432-7885
24700-0415
25003-8526
21086-4281
24700-0416
21238-4281
26080-4281
24700-0417
21238-6843
24700-1931
26080-1083
25003-7098
25003-6809
25003-7284
25003-9480
24700-4256
25003-1311
21432-9552
25003-9847
25003-9173
25003-3220
25003-6202
25003-7593
24700-0418
21238-4283
24700-0419
21238-5421
25001-7838
25003-7838
24700-0420
21238-4284
22627-9474
24700-0421
21238-4277
24700-0422
21238-4285
26080-4285
26080-2547
25003-9334
25003-4980
25003-7714
25003-8285
25003-8468
24700-3134
25003-2674
25003-7162
24700-0423
25003-9371
24700-0424
25003-6910

SHAFT

BORE

WIDTH

23.250
23.300
23.375
23.375
23.375
23.375
23.375
23.428
23.500
23.500
23.500
23.500
23.500
23.500
23.500
23.500
23.500
23.512
23.562
23.562
23.562
23.563
23.570
23.595
23.622
23.622
23.622
23.622
23.622
23.622
23.625
23.625
23.625
23.625
23.625
23.750
23.750
23.750
23.750
23.750
23.750
23.812
23.875
23.875
23.875
23.900
24.000
24.000
24.000
24.000
24.000
24.000

25.250
24.300
24.875
25.375
25.375
25.375
25.375
24.928
24.500
24.625
25.250
25.250
25.500
25.500
25.500
25.500
25.500
25.512
25.250
25.250
25.375
25.375
25.070
25.095
24.803
25.197
25.197
25.590
25.591
25.984
25.125
25.625
25.750
26.000
26.000
24.875
25.250
25.250
25.250
25.750
26.750
24.937
24.875
26.000
26.000
25.100
25.000
25.000
25.125
25.125
25.125
25.500

0.812
0.500
0.750
0.812
0.812
0.875
1.000
0.750
0.500
1.375
0.750
0.750
0.750
0.812
0.875
0.875
1.000
0.812
0.750
0.750
0.750
0.750
0.750
0.750
0.433
0.787
0.787
0.866
0.984
0.984
0.750
0.812
0.875
0.875
0.875
1.250
0.750
0.875
1.000
0.812
1.500
1.250
0.500
0.875
0.875
0.750
0.500
0.750
0.500
0.500
1.250
0.700

MODEL NO. PART NO.

64
23
23
23
59
64
59
23
23
142
59
64
23
23
59
64
53
23
59
64
64
59
23
23
26
59
64
59
59
59
23
23
59
59
64
142
23
59
64
23
59
142
23
59
64
23
21
142
21
23
142
23

21238-6910
25003-5595
25003-7414
25003-7139
24700-0986
21238-4287
24700-0425
25003-0582
25003-5756
21432-9909
24700-0426
21238-5547
25003-6772
25003-6879
24700-0427
21238-4288
21086-4289
25003-0464
24700-0428
21238-4290
21238-4291
24700-0429
25003-5614
25003-5615
24600-5715
24700-5280
21238-8624
24700-4519
24700-5559
24700-4518
25003-5903
25003-6337
24700-0430
24700-0431
21238-4292
21432-9685
25003-7594
24700-3428
21238-6239
25003-5553
24700-0432
21432-7724
25003-8108
24700-0433
21238-4293
25003-1294
25001-3254
21432-9336
25001-5552
25003-5552
21432-5870
25003-4874

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-118

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.000
24.015
24.015
24.093
24.125
24.125
24.213
24.250
24.250
24.250
24.250
24.250
24.250
24.250
24.250
24.250
24.250
24.250
24.375
24.375
24.409
24.409
24.437
24.437
24.437
24.437
24.438
24.438
24.500
24.500
24.500
24.500
24.500
24.500
24.500
24.500
24.500

25.500
25.500
25.500
25.500
25.625
26.000
26.000
26.000
26.000
26.000
26.000
26.250
26.250
26.500
26.500
27.000
25.748
25.984
26.093
25.125
26.000
25.213
25.250
25.250
25.375
25.750
25.750
26.000
26.250
26.250
26.250
26.250
26.250
25.625
26.375
26.378
26.378
26.000
26.437
26.437
26.437
26.000
26.438
25.375
25.500
25.625
25.625
25.625
26.000
26.250
26.500
26.500

0.750
0.750
0.750
1.000
0.812
0.750
0.812
0.812
0.875
0.875
0.875
0.875
1.000
0.875
1.000
0.875
0.787
0.812
0.812
0.500
0.812
0.750
0.500
0.750
1.250
0.750
1.000
1.000
0.812
0.875
0.875
1.000
1.000
0.625
0.750
0.812
0.866
0.750
0.750
0.750
0.812
0.750
0.750
0.375
0.500
0.500
0.500
0.625
0.750
0.812
0.812
0.875

MODEL NO. PART NO.

23
59
64
142
21
59
21
23
26
59
64
64
59
64
59
64
23
23
23
23
23
142
23
142
142
123
142
59
23
59
64
53
64
23
59
23
26
64
23
64
23
59
59
23
23
21
23
23
23
23
23
59

25003-4623
24700-0434
21238-4623
21432-5440
25001-8502
24700-0435
25001-5919
25003-5919
24600-4294
24700-4294
21238-4294
21238-6293
24700-0436
21238-4297
24700-0437
21238-5644
25003-1112
25003-7119
25003-5707
25003-6766
25003-5513
21432-7422
25003-8139
21432-4543
21432-9498
21016-6880
21432-6458
24700-4494
25003-7352
24700-0438
21238-4301
21086-3770
21238-3770
25003-1977
24700-0439
25003-0864
24600-3678
21238-4302
25003-4304
21238-4304
25003-6335
24700-0440
24700-0441
25003-0822
25003-5818
25001-4675
25003-4675
25003-7469
25003-9282
25003-6987
25003-8689
24700-0442

SHAFT

BORE

WIDTH

24.500
24.567
24.610
24.625
24.625
24.640
24.750
24.750
24.803
24.803
24.803
24.803
24.812
24.875
24.875
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.000
25.006
25.125
25.125
25.125
25.125
25.187
25.187
25.187
25.188
25.196
25.196
25.197
25.203
25.219

26.500
25.748
26.110
25.500
25.875
25.640
25.750
26.750
26.181
26.303
26.378
26.750
26.812
26.375
26.875
26.000
26.125
26.250
26.500
26.500
26.500
26.500
26.500
26.500
26.875
27.000
27.000
27.000
27.000
27.000
27.000
27.250
27.375
27.500
27.500
27.500
27.500
27.500
26.006
26.125
26.250
26.250
26.750
26.875
26.937
27.187
26.875
26.696
27.196
27.165
27.171
27.219

0.875
0.590
1.000
0.375
0.562
0.500
0.500
0.812
0.563
0.750
0.750
0.875
0.812
1.000
0.812
0.500
1.375
0.625
0.750
0.750
0.750
0.750
0.750
1.000
0.750
0.750
0.812
0.875
0.875
0.906
1.000
0.875
0.875
0.875
0.875
0.875
0.875
1.000
0.375
0.500
1.250
1.375
0.750
0.750
0.750
0.812
0.750
0.750
0.812
0.807
0.812
0.812

MODEL NO. PART NO.

64
26
142
23
23
23
23
23
87
23
64
59
23
142
23
23
142
23
23
59
64
88
88NS
142
23
23
23
59
64
87
64
64
59
59
64
88
88NS
59
23
23
142
142
59
64
64
23
59
23
23
23
23
23

21238-4305
24600-2505
21432-8648
25003-0626
25003-6965
25003-2196
25003-9313
25003-7200
26080-2884
25003-5720
21238-1451
24700-1070
25003-9383
21432-9393
25003-4839
25003-5798
21432-8566
25003-1098
25003-4308
24700-0443
21238-4308
26088-4308
26188-4308
21432-9699
25003-2509
25003-9154
25003-6419
24700-0444
21238-3774
26080-2207
21238-4309
21238-6421
24700-0445
24700-0446
21238-5997
26088-5997
26188-5997
24700-0821
25003-9982
25003-5729
21432-7681
21432-8390
24700-0447
21238-4311
21238-5994
25003-5828
24700-0448
25003-6823
25003-7679
25003-1719
25003-2769
25003-5748

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-119

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

25.250
25.250
25.250
25.250
25.250
25.250
25.375
25.375
25.437
25.437
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.500
25.530
25.590
25.590
25.590
25.590
25.590
25.625
25.625
25.625
25.625
25.625
25.625
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.750
25.875
25.875

26.750
26.750
27.250
27.250
27.250
28.000
26.875
28.500
27.187
27.187
26.500
27.000
27.000
27.000
27.000
27.500
27.500
27.500
27.500
27.500
27.500
27.500
27.500
27.500
27.030
26.590
27.090
27.165
27.756
27.953
26.625
26.750
26.750
26.875
27.625
27.750
26.875
26.875
26.875
26.875
26.875
26.875
27.000
27.000
27.250
27.250
27.250
27.750
28.125
28.755
26.750
26.875

0.500
0.750
0.750
0.812
0.875
0.875
0.562
1.500
0.750
0.750
0.500
0.750
0.750
0.875
1.000
0.750
0.750
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.750
0.500
0.750
0.787
0.787
0.984
0.500
0.500
0.500
0.625
0.812
1.000
0.500
0.500
0.547
0.562
0.625
0.750
0.500
0.625
0.750
0.750
0.750
0.812
0.750
1.500
0.375
0.500

Garlock

MODEL NO. PART NO.

23
23
64
23
59
59
23
59
23
59
23
23
59
64
142
23
59
23
53
59
64
87
88
88NS
23
23
23
59
59
59
23
21
23
23
23
59
21
23
23
23
23
23
23
23
23
59
64
23
23
59
23
23

25003-5141
25003-7163
21238-4299
25003-7859
24700-0450
24700-0451
25003-2709
24700-0452
25003-7646
24700-4360
25003-9988
25003-4317
24700-0453
21238-4300
21432-8547
25003-6918
24700-0454
25003-9090
21086-4318
24700-5162
21238-4318
26080-4318
26088-4318
26188-4318
25003-5743
25003-5779
25003-9325
24700-1044
24700-4244
24700-4517
25003-9382
25001-8773
25003-8773
25003-1997
25003-0663
24700-0455
25001-4676
25003-4676
25003-7899
25003-9025
25003-6321
25003-9305
25003-6539
25003-5894
25003-6998
24700-0456
21238-6998
25003-9569
25003-0671
24700-0457
25003-0696
25003-4698

SHAFT

BORE

WIDTH

25.875
25.875
25.875
25.875
25.988
25.988
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.000
26.125
26.125
26.125
26.125
26.125
26.220
26.250
26.299
26.375
26.375
26.375
26.375
26.375
26.375
26.375
26.378
26.378
26.378
26.437
26.500
26.500
26.500
26.500
26.500
26.500
26.500
26.500

27.875
28.000
28.000
28.000
27.625
27.625
27.000
27.125
27.125
27.125
27.250
27.500
27.500
27.625
27.625
27.625
27.625
28.000
28.000
28.000
28.000
28.000
28.125
28.500
28.500
28.125
28.125
28.125
28.125
28.125
27.220
28.250
27.795
28.188
28.188
28.188
28.250
28.250
28.375
28.375
27.874
27.953
28.898
28.437
28.000
28.000
28.000
28.000
28.500
28.500
28.500
29.500

0.812
0.875
0.875
1.000
0.750
0.750
0.500
0.500
0.562
1.375
0.625
0.750
1.000
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.875
0.875
0.875
0.875
0.812
0.813
0.875
0.875
0.875
0.500
0.812
1.000
0.750
0.875
0.875
0.875
0.875
0.812
1.000
0.748
0.787
0.984
0.812
0.750
0.750
0.750
0.875
0.812
0.875
0.875
1.500

MODEL NO. PART NO.

23
59
64
53
59
64
23
23
23
142
23
23
142
59
64
88
88NS
21
23
59
23
64
64
59
64
23
59
64
88
88NS
23
23
142
59
59
64
59
64
23
59
23
59
59
23
23
59
64
59
23
59
64
59

25003-9266
24700-0458
21238-4303
21086-3776
24700-0459
21238-4306
25003-4714
25003-6940
25003-1919
21432-9318
25003-0959
25003-0455
21432-9183
24700-0460
21238-5921
26088-5921
26188-5921
25001-7710
25003-7710
24700-0461
25003-6483
21238-4325
21238-9402
24700-0462
21238-4794
25003-7699
24700-0463
21238-4330
26088-4330
26188-4330
25003-3141
25003-9759
21432-7685
24700-0464
24700-4097
21238-4307
24700-0465
21238-4312
25003-5017
24700-0466
25003-2248
24700-3945
24700-4672
25003-6886
25003-4533
24700-0467
21238-4533
24700-3279
25003-6332
24700-0468
21238-4313
24700-0469

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-120

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

26.625
26.687
26.750
26.750
26.771
26.781
26.815
26.875
26.875
26.875
26.968
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.000
27.125
27.165
27.250
27.250
27.250
27.250
27.250
27.375
27.500
27.500
27.500
27.500
27.500
27.500
27.500
27.500
27.500
27.559
27.559
27.562
27.625
27.625
27.625
27.750
27.750
27.875
27.875

28.125
28.687
28.562
28.750
27.771
28.781
28.815
27.750
28.125
28.875
27.953
28.000
28.125
28.500
28.500
29.000
29.000
29.000
29.000
29.000
29.000
29.500
29.500
30.000
30.000
29.625
28.740
28.375
29.250
29.250
29.250
29.250
29.375
29.000
29.000
29.000
29.500
29.500
29.500
29.500
29.500
29.500
29.055
30.079
29.562
29.125
29.625
29.625
28.875
29.750
29.812
29.812

0.750
0.812
0.812
0.812
0.500
0.812
0.812
0.375
0.500
0.812
0.500
0.500
1.375
0.625
0.750
0.750
0.812
0.875
0.875
0.875
1.000
0.875
1.000
0.875
0.875
0.750
0.787
1.375
0.812
0.813
0.875
0.875
0.812
0.750
0.750
0.750
0.750
0.812
0.875
0.875
1.000
1.000
0.748
0.984
0.812
0.750
0.750
0.750
0.562
0.812
0.875
0.875

MODEL NO. PART NO.

23
23
23
23
23
23
23
23
23
23
23
23
142
23
26
59
23
64
88
88NS
59
64
59
59
64
23
59
142
23
59
59
64
23
23
59
64
23
23
59
64
88
88NS
23
26
23
59
59
64
23
23
59
64

25003-2707
25003-9626
25003-2628
25003-9647
25003-5799
25003-5278
25003-6819
25003-1312
25003-0755
25003-5102
25003-1169
25003-8043
21432-8277
25003-5050
24600-1952
24700-0470
25003-7340
21238-4333
26088-4333
26188-4333
24700-1971
21238-8031
24700-0471
24700-0472
21238-9984
25003-5879
24700-3489
21432-9319
25003-8103
24700-0473
24700-4626
21238-4626
25003-9375
25003-4315
24700-0474
21238-4315
25003-2313
25003-7251
24700-0475
21238-4339
26088-3784
26188-3784
25003-4481
24600-5067
25003-7881
24700-0476
24700-0477
21238-5001
25003-9420
25003-8190
24700-0478
21238-4341

SHAFT

BORE

WIDTH

27.875
27.875
27.952
27.969
27.992
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.000
28.125
28.125
28.125
28.250
28.250
28.250
28.346
28.375
28.486
28.500
28.500
28.500
28.500
28.500
28.500
28.500
28.500

29.815
29.875
29.952
29.969
29.119
29.125
29.125
29.125
29.500
29.500
29.500
29.500
29.625
29.625
29.625
29.625
29.813
29.813
30.000
30.000
30.000
30.000
30.000
30.250
30.250
30.500
30.500
30.500
30.500
30.500
30.500
30.535
31.000
31.000
32.000
29.250
29.250
29.250
29.500
29.750
30.250
30.315
29.500
29.860
29.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500

0.875
0.812
0.812
0.812
0.500
0.500
1.250
1.375
0.750
0.750
0.750
1.000
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.822
0.875
0.875
1.500
0.812
1.250
0.875
0.875
0.875
0.875
0.875
1.000
0.875
0.875
0.875
0.875
0.500
0.562
0.750
0.625
1.000
0.812
0.984
0.500
0.687
0.500
0.625
0.750
0.812
0.875
0.875
0.875
0.875

MODEL NO. PART NO.

59
23
23
23
23
23
142
142
23
59
64
142
59
64
88
88NS
59
64
23
23
59
64
142
64
59
59
64
87
88
88NS
59
59
59
64
59
23
23
59
23
142
23
23
23
23
23
59
59
23
23
59
64
88

24700-0479
25003-9690
25003-5860
25003-5895
25003-9890
25003-5504
21432-9832
21432-8561
25003-4343
24700-0480
21238-4343
21432-9730
24700-0481
21238-7828
26088-7828
26188-7828
24700-0482
21238-4316
25003-6786
25003-9603
24700-0483
21238-4344
21432-8214
21238-4320
24700-0484
24700-0485
21238-3878
26080-3878
26088-3878
26188-3878
24700-0820
24700-0486
24700-0487
21238-5998
24700-0488
25003-6068
25003-9482
24700-1996
25003-0896
21432-5272
25003-9575
25003-0786
25003-7900
25003-0458
25003-5266
24700-0490
24700-1997
25003-7655
25003-4346
24700-4454
21238-4346
26088-4346

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-121

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

28.500
28.500
28.500
28.500
28.625
28.740
28.740
28.740
28.740
28.750
28.750
28.750
28.750
28.875
28.875
28.875
28.938
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.000
29.125
29.133
29.134
29.134
29.250
29.250
29.250
29.250
29.375
29.500
29.500
29.500
29.500
29.500
29.500
29.500
29.500
29.500
29.500
29.500

30.500
31.000
31.000
31.000
30.625
31.102
31.259
31.260
31.260
29.750
30.750
30.750
30.750
29.750
29.750
30.875
30.512
30.125
30.500
30.500
30.500
30.500
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.500
32.000
32.000
32.000
31.133
30.709
31.134
30.250
30.250
30.750
31.250
31.375
30.500
31.000
31.500
31.500
31.500
31.500
32.000
32.000
32.000
32.000
32.250

0.875
0.875
0.875
0.875
0.812
0.984
1.007
0.748
0.984
0.500
0.812
0.875
0.875
0.500
0.500
0.812
0.787
0.500
0.750
0.750
0.750
0.750
0.812
0.875
0.875
0.875
0.875
0.875
1.000
1.000
0.875
0.875
1.500
0.812
0.750
0.812
0.500
0.750
1.000
0.812
0.812
0.500
1.000
0.750
0.812
0.875
1.000
0.750
0.750
0.875
0.875
0.875

Garlock

MODEL NO. PART NO.

88NS
53
59
64
23
59
59
23
59
23
23
59
64
21
23
23
59
23
23
59
64
113
23
59
64
87
88
88NS
23
64
59
64
59
21
59
23
23
142
142
23
23
23
142
59
23
64
64
88
88NS
59
64
64

26188-4346
21086-4534
24700-0491
21238-4534
25003-2158
24700-4516
24700-4487
25003-2796
24700-2543
25003-5863
25003-6803
24700-0492
21238-4628
25001-5612
25003-5612
25003-9797
24700-5442
25003-9852
25003-4347
24700-0493
21238-4347
21012-4347
25003-7331
24700-0494
21238-4348
26080-4348
26088-4348
26188-4348
25003-2764
21238-8793
24700-0495
21238-4537
24700-0496
25001-7107
24700-1998
25003-7107
25003-5263
21432-4696
21432-5871
25003-6577
25003-7039
25003-4526
21432-4918
24700-0498
25003-6403
21238-4352
21238-3791
26088-7788
26188-7788
24700-0499
21238-4538
21238-4322

SHAFT

BORE

WIDTH

29.500
29.500
29.500
29.527
29.527
29.527
29.527
29.528
29.562
29.625
29.687
29.750
29.875
29.875
29.906
29.906
29.918
29.921
29.921
29.921
29.950
29.968
29.973
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000
30.000

32.250
32.500
32.500
30.527
31.125
31.496
31.496
32.047
31.562
31.625
31.687
31.750
31.000
31.875
30.906
31.906
31.418
31.496
31.890
32.008
30.950
31.968
31.973
31.000
31.000
31.125
31.125
31.250
31.500
31.500
31.600
31.600
31.616
31.616
31.625
31.625
31.625
31.625
31.625
32.000
32.000
32.000
32.000
32.000
32.000
32.000
32.000
32.250
32.250
32.500
32.500
32.500

1.000
0.875
0.938
0.500
0.750
0.787
0.905
0.750
0.812
0.812
0.812
0.875
1.250
0.812
0.500
0.812
0.750
0.787
0.984
0.866
0.750
0.812
0.687
0.500
0.750
0.500
0.562
0.500
0.750
0.750
0.770
0.770
0.750
0.750
0.625
0.750
0.750
0.750
0.750
0.750
0.812
0.875
0.875
0.875
1.000
1.000
1.250
0.875
1.156
0.875
0.875
1.000

MODEL NO. PART NO.

59
64
59
23
23
23
23
23
23
23
23
23
142
23
23
23
23
59
59
59
142
23
23
23
142
23
23
23
23
64
88
88NS
59
64
59
59
64
88
88NS
59
23
59
64
87
23
53
142
64
59
59
64
64

24700-0500
21238-4539
24700-0501
25003-5780
25003-9225
25003-3165
25003-3169
25003-2079
25003-6583
25003-5281
25003-5821
25003-2907
21432-9814
25003-4857
25003-7325
25003-6907
25003-4897
24700-4917
24700-3132
24700-3837
21432-4928
25003-1974
25003-7768
25003-9339
21432-9570
25003-6404
25003-8588
25003-8980
25003-4356
21238-4356
26088-8487
26188-8487
24700-0502
21238-5000
24700-0503
24700-1999
21238-7870
26088-7870
26188-7870
24700-0504
25003-6849
24700-1006
21238-4357
26080-4357
25003-3796
21086-3796
21432-7265
21238-4323
24700-0505
24700-0506
21238-4358
21238-3797

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-122

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE
BORE WIDTH
WIDTH
MODEL NO.
PART
PART
NO.NO.

SHAFT

BORE

WIDTH

30.000
30.000
30.065
30.125
30.250
30.250
30.250
30.312
30.313
30.315
30.375
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.500
30.562
30.615
30.688
30.709
30.750
30.750
30.800
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.000
31.250
31.250
31.250
31.250
31.406

32.750
33.000
31.065
31.125
32.250
32.500
32.500
32.375
31.813
33.268
32.375
32.500
32.500
32.500
32.500
32.500
32.500
32.500
32.500
33.000
33.000
33.000
33.000
33.500
33.500
32.562
33.268
31.750
33.228
31.750
32.750
31.800
32.000
32.125
32.500
32.500
32.500
32.500
32.500
33.000
33.000
33.000
33.000
33.000
33.500
34.000
34.000
32.750
33.250
33.250
33.250
32.992

31.496
31.500
31.500
31.500
31.500
31.500
31.750
31.750
31.750
31.750
31.750
31.750
31.750
31.750
31.750
31.750
31.890
31.890
32.000
32.000
32.000
32.000
32.000
32.000
32.000
32.000
32.125
32.125
32.125
32.125
32.125
32.125
32.156
32.187
32.205
32.250
32.250
32.312
32.312
32.375
32.375
32.375
32.500
32.500
32.500
32.500
32.500
32.500
32.500
32.500
32.500
32.500

34.015
32.500
33.000
33.000
33.500
33.500
32.750
33.250
33.750
33.750
33.750
33.750
33.750
33.750
33.750
35.750
33.890
34.409
33.000
33.125
34.000
34.000
34.000
34.000
34.500
34.500
33.625
34.125
34.125
34.125
34.625
34.687
34.250
34.187
34.205
33.625
34.250
34.500
34.500
33.625
33.625
34.375
33.625
33.625
34.500
34.500
34.500
34.500
34.500
34.500
34.500
34.500

0.984
0.500
0.750
0.750
0.812
1.250
0.500
1.000
0.750
0.750
0.812
0.875
0.875
1.250
1.500
1.500
0.812
0.984
0.500
0.500
0.812
0.875
0.875
1.250
0.875
0.875
0.625
0.812
0.875
0.875
0.875
0.750
0.750
0.812
1.250
0.625
0.812
0.875
0.875
0.500
0.625
1.000
0.500
0.562
0.812
0.875
0.875
0.875
0.875
1.000
1.250
1.500

0.875
0.875
0.500
0.500
0.812
0.875
0.875
0.875
0.750
1.063
0.812
0.750
0.750
0.812
0.875
0.875
0.875
0.875
1.000
0.750
0.875
1.000
1.000
0.875
0.875
0.812
1.094
0.500
0.984
0.500
1.250
0.500
0.500
0.500
0.562
0.750
0.750
0.750
1.000
0.812
0.812
0.875
0.875
1.250
0.875
0.875
0.875
0.750
0.750
0.750
0.750
0.750

64
64
23
23
23
59
64
64
23
59
23
23
59
23
59
64
88
88NS
23
59
64
59
87
59
64
23
59
23
59
23
142
23
23
23
23
21
23
64
59
21
23
59
64
142
64
59
64
64
23
59
64
23

21238-4359
21238-4360
25003-0779
25003-5514
25003-7773
24700-0507
21238-4906
21238-4361
25003-1985
24700-4875
25003-6297
25003-7161
24700-0508
25003-8934
24700-3876
21238-4365
26088-4365
26188-4365
25003-0501
24700-0509
21238-8577
24700-4376
26080-2027
24700-0510
21238-8230
25003-5647
24700-4578
25003-0208
24700-1933
25003-6677
21432-5275
25003-7866
25003-5611
25003-9853
25003-9288
25001-5739
25003-5739
21238-5739
24700-0511
25001-7412
25003-7412
24700-0512
21238-4367
21432-5588
21238-4540
24700-0513
21238-4541
21238-4631
25003-5033
24700-0514
21238-5033
25003-7658

MODEL NO. PART NO.

59
23
23
123
23
142
23
142
21
23
23
59
64
142
142
59
23
59
23
23
23
59
64
142
59
64
23
23
59
64
64
23
23
23
142
23
23
59
64
23
23
23
23
23
23
59
64
88
88NS
23
142
142

24700-5560
25003-9493
25003-9736
21016-9736
25003-7644
21432-9550
25003-7206
21432-5566
25001-9156
25003-9156
25003-7355
24700-0515
21238-5016
21432-9220
21432-8651
24700-0521
25003-5847
24700-4671
25003-0884
25003-6609
25003-7441
24700-0516
21238-4632
21432-8113
24700-0517
21238-8407
25003-8549
25003-5435
24700-0518
21238-4371
21238-7537
25003-0375
25003-2794
25003-9348
21432-8754
25003-8550
25003-9205
24700-0519
21238-4373
25003-9212
25003-5361
25003-9968
25003-6405
25003-4743
25003-7387
24700-0520
21238-4377
26088-4377
26188-4377
25003-3813
21432-5218
21432-4547

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-123

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

32.687
32.687
32.750
32.750
32.750
32.750
32.835
32.969
32.986
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.000
33.250
33.250
33.464
33.500
33.500
33.500
33.500
33.500
33.500
33.500
33.500
33.500
33.500
33.500
33.500
33.500

33.937
34.687
34.250
34.500
34.750
35.000
33.937
34.625
33.986
34.000
34.125
34.500
34.500
34.500
34.500
34.609
34.613
34.625
34.625
34.625
34.630
34.687
34.688
34.937
35.000
35.000
35.000
35.000
35.000
35.000
35.250
35.250
35.500
35.500
35.500
35.500
35.250
35.250
35.236
35.000
35.500
35.500
35.500
35.500
35.500
35.625
35.750
36.000
36.000
36.000
36.000
36.000

0.500
0.812
0.750
0.875
0.812
0.875
0.500
0.750
0.500
0.500
0.500
0.625
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.750
0.812
0.750
0.750
0.812
0.875
0.875
0.875
0.875
0.875
0.750
0.750
0.750
0.875
0.750
0.812
0.787
0.875
0.812
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875
0.875

Garlock

MODEL NO. PART NO.

23
23
64
59
23
64
23
26
23
23
23
23
23
59
64
59
59
59
64
87
59
64
59
23
23
59
23
64
88
88NS
59
64
59
88
88NS
64
21
23
23
64
23
59
64
88
88NS
64
64
26
59
64
88
88NS

25003-1695
25003-8122
21238-4542
24700-3250
25003-6805
21238-8289
25003-1701
24600-5454
25003-6863
25003-5159
25003-6947
25003-5698
25003-4381
24700-0522
21238-4381
24700-0523
24700-0524
24700-0525
21238-6787
26080-6787
24700-0526
21238-6152
24700-0527
25003-6958
25003-3083
24700-0528
25003-7244
21238-4382
26088-4382
26188-4382
24700-0529
21238-4326
24700-0530
26088-7790
26188-7790
21238-4544
25001-7154
25003-6944
25003-6894
21238-9504
25003-6107
24700-0531
21238-4389
26088-4389
26188-4389
21238-4548
21238-4549
24600-0532
24700-0532
21238-4550
26088-4550
26188-4550

SHAFT

BORE

WIDTH

33.500
33.500
33.500
33.500
33.625
33.625
33.625
33.750
33.858
33.858
33.875
33.937
34.000
34.000
34.000
34.000
34.000
34.000
34.000
34.000
34.000
34.000
34.000
34.250
34.250
34.250
34.250
34.252
34.500
34.500
34.500
34.500
34.500
34.500
34.500
34.500
34.500
34.500
34.500
34.750
34.750
34.750
34.750
34.804
34.812
35.000
35.000
35.000
35.000
35.000
35.000
35.000

36.002
36.250
36.250
36.417
35.593
35.625
35.625
35.750
35.433
35.858
35.000
35.468
35.000
35.500
36.000
36.000
36.000
36.000
36.250
36.500
36.500
37.000
37.000
36.250
36.250
36.750
36.750
36.252
36.000
36.000
36.000
36.500
36.500
36.500
36.500
36.500
36.500
36.500
37.500
36.625
36.750
36.750
36.750
35.804
35.812
36.000
36.500
36.500
37.000
37.000
37.000
37.000

0.938
0.875
0.875
0.875
0.937
0.875
0.875
0.812
0.787
0.813
1.250
0.812
0.500
0.750
0.812
0.812
0.875
0.875
1.250
0.750
0.875
0.875
1.000
0.875
0.875
0.875
0.875
0.812
0.750
0.750
0.750
0.812
0.875
0.875
0.875
1.000
1.000
1.250
0.875
0.750
0.875
0.875
0.875
0.750
0.750
0.500
0.625
0.750
0.812
0.813
0.875
0.875

MODEL NO. PART NO.

59
59
64
64
23
59
64
23
59
23
142
23
23
23
21
23
59
64
59
23
59
59
59
59
64
59
64
23
23
59
64
23
26
59
64
23
53
142
64
59
59
64
87
142
142
23
23
23
23
59
64
123

24700-0533
24700-0534
21238-4327
21238-4552
25003-1289
24700-0535
21238-4328
25003-6143
24700-1043
25003-2773
21432-9813
25003-9248
25003-5730
25003-5602
25001-7138
25003-7138
24700-0536
21238-4399
24700-0537
25003-1730
24700-0538
24700-4583
24700-0539
24700-0540
21238-4401
24700-0541
21238-4335
25003-5830
25003-6908
24700-0542
21238-6908
25003-6420
24600-4405
24700-4405
21238-4405
25003-3830
21086-3830
21432-8406
21238-4338
24700-0543
24700-0544
21238-3831
26080-3831
21432-7579
21432-7584
25003-5519
25003-5765
25003-5425
25003-5935
24700-0545
21238-3835
21016-3835

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-124

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

35.000
35.000
35.000
35.250
35.250
35.250
35.375
35.375
35.375
35.375
35.433
35.433
35.433
35.437
35.500
35.500
35.500
35.500
35.500
35.500
35.500
35.750
35.795
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.000
36.031
36.220
36.460
36.500
36.500
36.500
36.500
36.500
36.500
36.500
36.500
36.500
36.535
36.625

37.500
37.500
38.000
37.250
38.250
38.250
37.375
37.375
37.375
37.375
36.933
37.402
38.583
37.437
37.500
37.500
37.500
37.500
37.500
37.500
38.000
37.750
37.795
36.125
37.000
37.500
37.998
38.000
38.000
38.000
38.000
38.000
38.000
38.000
38.000
38.500
38.500
39.500
38.031
37.717
38.460
38.000
38.250
38.438
38.438
38.500
38.500
38.500
39.000
39.000
38.535
38.625

0.875
0.875
0.875
0.875
0.750
0.812
0.812
0.875
1.000
1.000
0.750
0.787
0.906
0.812
0.812
0.875
0.875
0.875
1.000
1.500
1.000
0.812
1.500
1.250
0.500
0.750
0.875
0.750
0.812
0.875
0.875
0.875
1.000
1.250
1.500
0.875
1.000
1.500
0.812
0.750
0.812
0.750
0.812
0.812
1.000
0.812
0.875
0.875
0.750
0.750
1.375
0.812

MODEL NO. PART NO.

59
64
64
64
59
64
23
64
53
59
23
23
59
23
23
26
59
64
23
142
59
23
142
142
23
23
59
23
23
59
64
87
53
142
142
59
53
59
23
64
23
64
23
23
23
23
59
64
23
59
142
23

24700-0546
21238-3836
21238-3837
21238-4416
24700-0547
21238-4647
25003-9335
21238-4417
21086-3838
24700-0548
25003-5824
25003-4872
24700-5620
25003-8200
25003-9645
24600-0549
24700-0549
21238-4553
25003-7695
21432-7819
24700-5595
25003-5658
21432-7918
21432-9337
25003-5885
25003-5714
24700-0550
25003-5662
25003-6406
24700-0551
21238-4421
26080-4421
21086-3843
21432-6722
21432-4829
24700-0552
21086-3844
24700-0553
25003-5013
21238-7770
25003-8172
21238-4429
25003-8684
25003-7875
25003-0880
25003-7813
24700-0554
21238-4430
25003-1728
24700-2000
21432-7222
25003-9219

SHAFT

BORE

WIDTH

36.750
36.750
36.750
36.750
36.750
36.750
37.000
37.000
37.000
37.000
37.000
37.000
37.000
37.000
37.125
37.250
37.250
37.250
37.250
37.375
37.375
37.402
37.402
37.437
37.438
37.500
37.500
37.500
37.500
37.500
37.500
37.500
37.500
37.500
37.500
37.500
37.500
37.795
37.795
37.812
37.812
37.812
37.875
38.000
38.000
38.000
38.000
38.000
38.000
38.000
38.000
38.000

38.750
38.750
38.750
39.250
39.250
39.250
38.000
38.500
39.000
39.000
39.000
39.000
39.000
39.250
39.125
38.375
39.250
39.250
39.250
38.625
39.375
38.902
39.921
39.500
39.500
39.000
39.000
39.500
39.500
39.500
39.500
39.500
39.500
39.500
39.500
39.500
40.250
40.157
40.945
39.812
40.945
40.945
39.875
39.000
39.500
40.000
40.000
40.000
40.000
40.000
40.000
41.000

0.812
0.875
1.000
0.875
0.875
0.875
0.500
1.000
0.812
0.875
0.875
1.000
1.250
0.875
1.250
1.250
0.812
0.875
0.875
0.500
0.812
0.750
0.984
0.875
0.875
0.750
0.875
0.750
0.750
0.750
0.812
0.812
0.875
0.875
0.875
0.875
1.000
0.875
0.906
0.812
0.875
0.875
1.250
0.500
0.750
0.625
0.812
0.875
0.875
1.000
1.250
0.875

MODEL NO. PART NO.

23
64
59
59
64
64
23
142
23
59
64
23
142
26
142
142
23
59
64
76
23
23
59
64
59
64
59
59
88
88NS
21
23
23
53
59
64
59
59
59
23
88
88NS
142
23
23
59
23
59
64
23
142
64

25003-6822
21238-4432
24700-0557
24700-0558
21238-7328
21238-7428
25003-9314
21432-5583
25003-9324
24700-0559
21238-4434
25003-4435
21432-5515
24600-0831
21432-6996
21432-9683
25003-5202
24700-0560
21238-4436
26193-8961
25003-5709
25003-7641
24700-4824
21238-3847
24700-0561
21238-9411
24700-0562
24700-0563
26088-7810
26188-7810
25001-9554
25003-9554
25003-4438
21086-4438
24700-3699
21238-4438
24700-0564
24700-2991
24700-0565
25003-5622
26088-4685
26188-4685
21432-4896
25003-7751
25003-7548
24700-4584
25003-7863
24700-0568
21238-4448
25003-1877
21432-4453
21238-4340

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-125

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

38.250
38.250
38.250
38.250
38.250
38.250
38.250
38.250
38.258
38.358
38.500
38.500
38.500
38.500
38.500
38.750
38.750
38.750
38.750
38.750
38.750
38.937
38.976
39.000
39.000
39.000
39.000
39.000
39.000
39.000
39.000
39.000
39.000
39.000
39.250
39.250
39.370
39.370
39.370
39.500
39.500
39.500
39.750
39.750
39.750
39.979
40.000
40.000
40.000
40.000
40.000
40.000

40.250
40.250
40.250
40.750
40.750
40.750
40.750
41.250
40.750
40.750
40.500
40.500
40.750
41.000
41.000
40.687
40.687
40.750
40.750
40.750
41.000
41.000
40.945
40.000
40.747
40.938
41.000
41.000
41.000
41.000
41.500
41.500
41.500
42.250
40.750
41.250
41.338
41.338
41.339
40.500
41.500
41.500
41.750
42.250
42.250
41.500
41.500
42.000
42.000
42.000
42.000
42.000

0.812
0.875
0.875
0.750
0.875
0.875
0.875
0.875
0.875
0.875
0.812
0.812
0.750
0.875
1.000
0.812
0.812
0.812
0.875
0.875
0.875
0.875
0.866
0.500
0.787
1.000
0.750
0.812
0.875
1.250
0.750
0.875
0.875
0.875
0.750
0.812
0.875
0.875
0.906
0.500
0.812
1.250
0.812
0.875
0.875
1.000
0.750
0.812
0.875
0.875
1.000
1.000

Garlock

MODEL NO. PART NO.

23
59
64
59
64
88
88NS
64
59
64
21
23
23
64
59
21
23
23
59
64
64
64
59
23
23
23
59
23
64
142
23
59
64
64
23
23
59
64
59
23
23
142
23
59
64
59
23
23
59
64
87
111

25003-5601
24700-0569
21238-4454
24700-0570
21238-4567
26088-4567
26188-4567
21238-4569
24700-0571
21238-4342
25001-6473
25003-6473
25003-9904
21238-4349
24700-0577
25001-5376
25003-5376
25003-9641
24700-0578
21238-4456
21238-4570
21238-4462
24700-4100
25003-9602
25003-6891
25003-0881
24700-0579
25003-6237
21238-4465
21432-5762
25003-1957
24700-0580
21238-4350
21238-4577
25003-5326
25003-9200
24700-3080
21238-1073
24700-2873
25003-7470
25003-5204
21432-9638
25003-8509
24700-0581
21238-7538
24700-0582
25003-5625
25003-6059
24700-0583
21238-4467
26080-4498
21011-4498

SHAFT

BORE

WIDTH

40.000
40.000
40.125
40.157
40.250
40.250
40.265
40.500
40.500
40.500
40.500
40.500
40.500
40.500
40.500
40.500
40.500
40.533
40.750
40.750
41.000
41.000
41.000
41.000
41.125
41.250
41.250
41.432
41.500
41.500
41.500
41.500
41.500
41.500
41.625
41.625
41.812
41.875
41.929
41.938
42.000
42.000
42.000
42.062
42.250
42.250
42.375
42.500
42.500
42.500
42.500
42.500

42.500
42.500
42.125
41.339
41.250
41.750
41.765
41.500
42.000
42.500
42.500
42.500
42.500
42.500
43.000
43.000
43.020
42.283
42.000
42.000
42.500
43.000
43.000
43.000
43.125
42.750
43.250
43.307
43.000
43.500
43.500
43.500
43.500
43.500
43.625
44.000
45.000
43.500
43.929
43.750
43.500
44.000
44.000
44.062
44.250
44.250
44.375
43.500
44.250
44.500
44.500
45.000

0.875
1.000
1.500
0.750
0.500
0.750
0.750
0.500
0.750
0.812
0.875
0.875
1.000
1.500
0.875
0.875
0.875
0.875
0.687
0.750
0.750
0.812
1.250
1.500
1.000
0.750
0.750
0.787
1.000
0.875
0.875
0.875
1.250
1.500
0.812
0.875
1.000
1.000
0.813
0.875
1.000
0.812
0.812
0.812
0.812
1.000
0.750
0.500
0.875
0.750
0.812
0.750

MODEL NO. PART NO.

64
64
142
23
23
23
23
23
23
23
59
64
53
142
59
64
64
23
23
23
23
23
142
142
23
23
23
59
142
59
64
87
142
142
23
59
59
64
23
59
142
21
23
23
23
59
23
23
64
23
23
59

21238-8791
21238-8599
21432-4964
25003-4386
25003-7752
25003-7550
25003-2265
25003-9735
25003-5174
25003-5219
24700-0584
21238-4468
21086-4469
21432-7605
24700-0585
21238-7300
21238-1964
25003-1622
25003-9913
25003-9900
25003-5873
25003-9568
21432-9745
21432-6514
25003-1983
25003-4471
25003-9777
24700-4137
21432-9650
24700-0586
21238-4635
26080-4635
21432-6997
21432-7479
25003-9549
24700-2521
24700-0587
21238-8628
25003-5267
24700-0588
21432-9946
25001-6407
25003-6407
25003-9878
25003-5804
24700-0589
25003-9238
25003-6268
21238-5555
25003-7199
25003-9686
24700-3171

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-126

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

42.500
42.500
42.500
42.520
42.750
42.750
42.750
42.913
42.992
43.000
43.000
43.000
43.125
43.500
43.500
43.500
43.500
43.500
43.500
43.500
43.504
43.543
43.562
43.750
43.750
44.000
44.000
44.000
44.000
44.000
44.000
44.000
44.000
44.000
44.000
44.000
44.094
44.185
44.290
44.337
44.500
44.500
44.500
45.000
45.000
45.000
45.000
45.000
45.000
45.125
45.250
45.500

45.000
45.000
45.500
45.039
43.750
43.750
44.250
44.913
44.492
45.000
45.000
45.500
44.625
45.000
45.500
45.500
45.500
45.500
45.500
45.500
45.669
45.543
45.562
45.750
45.750
45.500
46.000
46.000
46.000
46.000
46.000
46.000
46.500
46.500
47.000
47.000
46.063
46.188
45.790
45.837
46.000
46.000
46.500
46.500
46.625
46.750
46.750
47.000
47.000
47.125
47.125
47.500

0.875
0.875
0.875
0.984
0.375
0.500
0.750
0.812
0.750
0.812
0.875
0.875
0.750
0.750
0.750
0.875
0.875
0.875
0.875
1.500
0.984
0.812
1.000
0.875
0.875
0.750
0.812
0.875
0.875
1.250
1.375
1.500
0.875
0.875
0.875
1.250
0.812
0.812
0.750
0.750
0.750
0.875
0.812
0.750
1.000
0.875
0.875
0.812
0.875
0.812
0.812
1.500

MODEL NO. PART NO.

64
87
64
59
23
23
23
23
23
23
59
64
23
23
59
59
64
88
88NS
142
64
23
23
59
64
23
23
59
64
142
142
142
59
64
59
59
23
23
23
23
64
59
23
23
64
23
59
23
59
23
23
142

21238-4473
26080-4473
21238-6269
24700-3949
25003-9625
25003-5081
25003-4556
25003-5829
25003-1634
25003-7827
24700-0590
21238-7189
25003-9188
25003-6885
24700-0591
24700-1959
21238-4637
26088-4637
26188-4637
21432-8395
21238-0586
25003-5287
25003-7820
24700-0592
21238-4638
25003-5766
25003-5386
24700-0593
21238-7087
21432-9865
21432-7552
21432-6617
24700-0594
21238-4475
24700-3470
24700-0595
25003-2477
25003-0460
25003-9908
25003-9918
21238-4563
24700-0596
25003-5727
25003-5579
21238-8903
25003-1275
24700-0597
25003-6348
24700-0598
25003-6512
25003-8210
21432-5113

SHAFT

BORE

WIDTH

45.747
45.750
45.750
46.000
46.000
46.250
46.250
46.500
46.500
46.500
46.850
47.000
47.000
47.000
47.250
47.375
47.500
47.500
47.500
47.500
47.625
47.750
47.750
47.750
47.875
48.000
48.000
48.000
48.000
48.000
48.000
48.000
48.250
48.250
48.865
48.875
49.000
49.000
49.000
49.000
49.000
49.213
49.250
49.250
49.250
49.498
49.500
49.500
49.500
49.500
49.500
49.625

47.516
47.750
47.768
48.000
48.000
47.750
48.250
48.500
48.500
48.500
48.819
49.000
49.000
49.000
49.250
48.875
49.500
49.500
49.500
49.500
49.625
49.750
49.750
50.500
49.875
49.500
50.000
50.000
50.000
50.000
50.000
50.000
50.250
50.250
50.865
50.875
50.500
50.500
50.750
51.000
51.000
51.732
50.750
51.125
51.250
51.375
50.750
51.250
51.325
51.500
52.250
50.875

0.787
0.750
0.875
0.812
0.875
0.750
0.812
0.875
0.875
1.250
0.875
0.812
0.875
1.500
0.812
0.750
0.875
1.250
1.375
1.500
1.500
0.812
1.500
1.125
0.812
0.750
0.750
0.812
0.875
1.000
1.000
1.250
0.875
0.875
1.500
0.812
0.562
1.000
1.000
0.812
1.250
0.984
0.750
0.812
0.812
0.812
0.750
0.812
0.850
0.812
1.000
0.562

MODEL NO. PART NO.

23
23
59
23
59
23
23
59
64
142
64
23
59
142
23
23
59
142
142
142
142
23
142
59
23
23
23
23
64
23
59
142
59
64
142
23
23
142
59
23
142
59
23
23
23
23
23
23
23
23
59
23

25003-6889
25003-5409
24700-0599
25003-5107
24700-0600
25003-4572
25003-5823
24700-0601
21238-4578
21432-9886
21238-8317
25003-5744
24700-0602
21432-9794
25003-5905
25003-7543
24700-5447
21432-9579
21432-5924
21432-9343
21432-5521
25003-8228
21432-7993
24700-0603
25003-9894
25003-9403
25003-1118
25003-6671
21238-8579
25003-4608
24700-3172
21432-8568
24700-0604
21238-4639
21432-9850
25003-7018
25003-6315
21432-5243
24700-0605
25003-9848
21432-9229
24700-4599
25003-9545
25003-7825
25003-7102
25003-5061
25003-0948
25003-7830
25003-1907
25003-6565
24700-0606
25003-7817

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-127

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

50.000
50.000
50.000
50.000
50.000
50.000
50.000
50.500
50.984
51.000
51.000
51.000
51.000
51.250
51.250
51.500
51.500
51.575
52.000
52.000
52.000
52.000
52.186
52.250
52.500
52.500
52.500
52.875
53.000
53.000
53.000
53.000
53.150
53.185
53.250
53.500
53.543
53.625
54.000
54.000
54.000
54.331
54.331
54.500
54.750
55.000
55.000
55.000
55.000
55.125
55.250
55.500

51.000
51.500
52.000
52.000
52.000
52.000
52.250
52.500
52.165
52.000
52.875
53.000
53.000
53.250
53.300
53.500
53.500
53.575
53.000
54.000
54.000
54.000
54.186
54.125
54.500
55.000
55.000
53.875
54.875
54.875
54.882
55.000
55.669
54.190
54.250
55.000
55.543
54.625
56.000
56.000
56.000
56.299
56.693
56.500
56.375
56.000
56.500
57.000
57.000
58.000
56.500
57.500

0.500
0.750
0.812
0.875
0.875
0.875
0.750
0.812
0.787
0.500
0.812
0.750
0.812
0.875
0.875
1.250
1.500
0.812
0.500
0.750
0.812
1.500
0.812
0.812
0.812
0.750
0.875
0.500
0.812
0.813
0.881
0.812
0.866
0.812
0.500
0.750
0.812
0.500
0.812
1.000
1.250
0.984
0.984
0.812
0.875
0.500
0.750
0.812
1.250
0.750
0.750
0.750

Garlock

MODEL NO. PART NO.

23
23
23
23
59
64
23
23
87
23
23
23
23
64
64
142
142
23
23
23
23
142
23
23
23
23
59
23
23
59
23
23
64
23
23
23
23
23
23
59
142
23
64
23
59
23
23
23
142
23
23
59

25003-7227
25003-5618
25003-9820
25003-8198
24700-0607
21238-8198
25003-2703
25003-7755
26080-2886
25003-5245
25003-5577
25003-1121
25003-6775
21238-6747
21238-1914
21432-9235
21432-8672
25003-9938
25003-5273
25003-9779
25003-4761
21432-9233
25003-0459
25003-9202
25003-5433
25003-0417
24700-0608
25003-9899
25003-6582
24700-0610
25003-3140
25003-8058
21238-7065
25003-2308
25003-5596
25003-9395
25003-7106
25003-5634
25003-9912
24700-0611
21432-8659
25003-9919
21238-8594
25003-5510
24700-0612
25003-5274
25003-9394
25003-9427
21432-9923
25003-1453
25003-1227
24700-0613

SHAFT

BORE

WIDTH

55.500
55.750
55.750
55.906
56.102
56.250
57.000
57.000
57.086
57.375
57.500
57.875
57.875
58.000
58.000
58.500
58.550
59.000
59.000
59.250
59.500
59.750
60.000
60.000
60.000
61.000
61.024
61.250
61.250
61.417
61.810
62.000
62.500
62.500
63.000
63.327
63.500
63.500
63.650
63.780
64.000
64.000
64.409
64.488
64.500
65.000
65.250
65.354
66.000
66.500
66.500
66.500

57.500
56.750
57.750
57.874
58.346
58.125
59.000
59.000
59.086
58.875
59.500
58.875
60.000
60.000
60.000
60.500
60.550
61.000
61.000
61.250
61.500
60.750
61.500
62.000
62.000
63.000
63.386
62.250
63.250
63.417
63.810
64.000
64.000
64.500
65.000
65.748
65.500
65.500
65.650
65.551
65.375
66.000
66.929
66.488
66.500
67.000
67.250
67.354
68.000
68.000
68.500
69.000

0.812
0.750
1.250
0.812
0.750
0.812
0.812
0.827
0.812
0.750
0.812
0.500
0.938
0.750
0.812
0.812
1.250
0.875
0.875
0.812
1.250
0.500
0.750
0.750
0.812
0.812
0.984
0.500
1.000
0.812
0.812
0.812
0.875
0.875
0.812
0.787
0.812
1.250
1.250
0.787
0.875
0.812
0.866
0.812
0.812
0.812
0.812
0.812
0.812
0.750
0.812
0.812

MODEL NO. PART NO.

23
142
142
23
23
23
23
23
23
23
23
23
59
23
23
23
142
59
64
23
142
23
23
23
23
23
64
23
59
23
23
23
59
59
23
64
23
142
142
59
59
23
64
23
23
23
23
23
23
23
23
23

25003-5385
21432-5471
21432-5648
25003-2623
25003-9917
25003-7785
25003-1872
25003-1733
25003-5264
25003-9327
25003-4440
25003-5735
24700-0614
25003-6989
25003-9781
25003-5902
21432-9605
24700-0615
21238-5482
25003-9843
21432-9332
25003-6653
25003-7544
25003-9236
25003-7911
25003-5689
21238-8622
25003-9310
24700-0616
25003-2475
25003-5587
25003-4856
24700-0617
24700-0618
25003-9599
21238-8557
25003-7015
21432-9292
21432-9627
24700-3961
24700-3903
25003-8324
21238-4979
25003-5586
25003-9289
25003-6915
25003-9344
25003-9806
25003-8563
25003-5811
25003-8618
25003-8872

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
S-128

Rev. 1/01

Garlock

Oil Seals by Shaft Size

SHAFT

BORE

WIDTH

66.875
67.000
67.000
67.750
68.000
68.000
68.000
68.500
68.968
69.000
69.125
69.375
70.000
70.000
70.000
70.500
70.688
71.000
71.000
71.250
72.500
73.000
74.000
74.409
74.500
74.500
75.000
75.000
75.000
75.000
75.188
75.750
76.000
76.250
76.500
77.500
79.500
80.000
80.500
80.500
81.000
82.283
82.677
84.000
84.000
85.000
86.000
86.417
87.000
88.031
88.100
88.583

68.000
68.500
69.000
69.750
70.000
70.000
70.000
70.500
70.957
71.000
71.125
71.375
71.000
72.000
72.000
72.500
72.688
73.000
73.000
73.250
74.000
75.000
76.000
76.929
76.000
76.500
76.000
76.500
77.000
77.000
77.188
77.750
78.000
78.250
78.500
79.500
81.500
82.000
82.437
82.500
83.000
84.252
84.645
85.000
86.000
87.000
88.000
88.417
89.000
90.031
89.600
90.583

0.562
0.750
0.812
1.250
0.750
0.812
1.000
0.812
0.787
0.812
0.812
0.812
0.500
0.812
0.875
0.812
0.875
0.812
1.250
0.812
0.750
0.812
0.812
0.984
0.750
0.812
0.375
0.750
0.812
1.000
0.812
1.250
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.812
0.500
0.812
0.812
0.812
0.812
0.812
0.812
1.000
0.812

MODEL NO. PART NO.

23
23
23
142
23
23
23
23
23
23
23
23
23
23
59
23
23
23
142
23
23
23
23
64
23
23
23
23
23
23
23
142
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
23
142
23

25003-1091
25003-7424
25003-8750
21432-5422
25003-9290
25003-8748
25003-2205
25003-9800
25003-9897
25003-7643
25003-3138
25003-5533
25003-9920
25003-6424
24700-3573
25003-5760
25003-4658
25003-9945
21432-9291
25003-7756
25003-2144
25003-6276
25003-8865
21238-9010
25003-5624
25003-0952
25003-4702
25003-1697
25003-9869
25003-3147
25003-0720
21432-5529
25003-7583
25003-8279
25003-6130
25003-5236
25003-5796
25003-6905
25003-5806
25003-5757
25003-7871
25003-4912
25003-8802
25003-5663
25003-5279
25003-5297
25003-5816
25003-7696
25003-7624
25003-4919
21432-9513
25003-9953

SHAFT

BORE

WIDTH

89.000
91.340
93.000
93.600
94.000
95.875
96.620
98.000
98.750

91.000
92.840
95.000
95.100
96.000
97.875
98.620
99.500
100.750

0.812
0.750
0.812
1.000
0.812
0.812
0.812
0.750
0.812

MODEL NO. PART NO.

23
23
23
142
23
23
23
23
23

25003-9322
25003-9710
25003-9269
21432-9514
25003-7291
25003-5787
25003-7137
25003-5805
25003-7334

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

S-129

Garlock
SHAFT
8
10
10
11
11
11
11
12
12
12
12
12
12
12
14
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
18
19
19
19
19
19
19
19
19
19

BORE
18
19
25
26
30
32
35
22
25
28
28
30
32
35
24
24
26
30
30
32
32
35
35
40
40
27
30
30
30
32
35
40
40
40
28
28
28
30
35
40
40
40
30
27
27
32
32
32
32
35
38
40

Oil Seals by Shaft Size (Metric)

WIDTH

MODEL NO.

PART NO.

SHAFT

5.0
7.0
7.0
7.0
8.0
8.0
8.0
7.0
7.0
7.0
7.0
8.0
8.0
8.0
7.0
7.0
7.0
8.0
8.0
7.0
8.0
7.0
8.0
8.0
8.0
5.0
7.0
8.0
8.0
8.0
8.0
8.0
10.0
10.0
7.0
7.0
8.0
7.0
8.0
7.0
14.0
16.0
7.0
3.0
5.0
7.0
8.0
8.0
11.0
8.0
16.0
7.0

61
92
92
71
63
63
63
92
92
61
92
63
63
63
92
92
92
63
61
92
63
92
63
63
62
71
92
63
61
63
63
63
63
94
76
92
61
92
61
92
63T2
EQ
92
71
71
92
63
66
63
63
EQ
92

24060-1748
27063-0004
27063-0012
26001-7008
21158-8101
21158-8011
21158-8337
27063-0020
27063-0022
24060-0024
27063-0024
21158-8012
21158-6623
21158-8338
27063-0026
27063-0028
27063-0030
21158-8020
24060-8020
27063-0032
21158-8021
27063-0033
21158-8109
21158-0085
21702-0085
26001-7022
27063-0048
21158-8023
24060-2280
21158-4680
21158-8342
21158-0095
21158-0096
27223-0096
26193-9856
27063-9856
24060-1754
27063-0064
24060-1755
27063-0066
23550-7405
24801-5416
27063-0074
26001-7029
26001-7028
27063-0118
21158-8033
21527-8033
21158-3870
21158-8344
24801-5223
27063-6289

19
19
19
19
19
19
19
19
20
20
20
20
20
20
20
20
20
20
20
20
20
20
22
22
22
22
22
22
22
22
23
23
23
23
23
23
24
24
24
24
25
25
25
25
25
25
25
25
25
25
25
25

BORE
40
40
40
40
42
47
47
47
30
32
32
35
35
35
40
40
40
42
42
47
47
52
32
35
35
40
40
47
50
50
40
40
40
42
47
52
35
40
44
49
35
35
35
37
38
42
42
45
47
47
47
47

WIDTH

MODEL NO.

PART NO.

8.0
8.0
10.0
15.0
8.0
8.0
10.0
10.0
7.0
7.0
17.5
7.0
8.0
16.0
7.0
16.0
19.0
7.0
16.0
7.0
7.0
10.0
7.0
7.0
7.0
7.0
8.0
7.0
16.0
19.0
8.0
8.0
10.0
8.0
10.0
10.0
7.0
7.0
16.0
12.0
7.0
7.0
8.0
7.0
7.0
7.0
8.0
15.9
7.0
10.0
10.0
16.0

63
66
63
63T2
63
63
63
94
92
92
EQ
92
61
IG
92
EQ
IG
92
EQ
61
92
92
76
61
26R1
92
61
92
EQ
IG
63
62
63
63
63
63
92
92
EQ
26R1
61
92
61
92
26R1
92
61
IG
92
63
61
EQ

21158-0145
21527-0145
21158-0146
23550-5214
21158-8035
21158-4935
21158-6120
27223-6120
27063-0120
27063-0154
24801-1905
27063-0164
24060-1760
29500-4868
27063-0184
24801-4596
29500-4448
27063-0188
24801-5325
24060-0194
27063-0194
27063-0196
26193-9855
24060-1232
24620-0209
27063-0198
24060-1470
27063-0206
24801-3088
29502-5794
21158-0235
21702-0235
21158-0236
21158-8050
21158-8051
21158-8052
27063-0209
27063-0210
24801-3263
24620-3712
24060-0212
27063-0212
24060-1478
27063-0230
24620-0280
27063-0232
24060-1761
29519-5736
27063-0250
21158-6859
24060-6859
24801-4563

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-1

Oil Seals by Shaft Size (Metric)

SHAFT
25
25
25
25
25
25
25
25
26
26
27
27
27
27
27
27
28
28
28
28
28
28
28
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30

BORE
47
48
50
50
52
52
52
52
42
47
40
40
40
42
47
52
38
40
40
47
47
47
47
40
40
42
42
42
45
45
47
47
47
47
47
48
50
50
50
52
52
52
52
52
54
54
54
60
62
62
62
62

WIDTH
16.0
19.0
16.0
18.0
7.0
10.0
10.0
12.5
7.0
7.0
8.0
8.0
10.0
8.0
10.0
10.0
7.0
7.0
10.0
10.0
10.0
10.0
17.5
7.0
7.0
7.0
8.0
16.0
8.0
16.0
7.0
7.0
10.0
10.0
17.5
8.0
7.0
11.0
19.0
7.0
10.0
10.0
10.0
10.0
10.0
10.0
11.0
12.5
6.0
7.0
10.0
10.0

MODEL NO.

PART NO.

IG
IG
EQ
EQ
92
63
62
EQ
92
92
63
66
63
63
63
63
92
92
61
63
61
61
EQ
61
92
92
61
IG
92
IG
61
92
63
61
EQ
92
26
26R1
IG
92
61
62
63
66
63
66
63
EQ
71
92
63
94

29500-4563
29500-5534
24801-5593
24801-1978
27063-0254
21158-4687
21702-4687
24801-0773
27063-0262
27063-0272
21158-0321
21527-0321
21158-0322
21158-8062
21158-8063
21158-8064
27063-0280
27063-0284
24060-2715
21158-5562
24060-1233
24060-5562
24801-2842
24060-0312
27063-0312
27063-0316
24060-1763
29500-4920
27063-0318
29500-5204
24060-0320
27063-0320
21158-9342
24060-9342
24801-3638
27063-0332
24600-0378
24620-0379
29500-5599
27063-0341
24060-2803
21702-3877
21158-3877
21527-3877
21158-0394
21527-0394
21158-0395
24801-1122
26001-7060
27063-0342
21158-4600
27223-4600

Garlock
SHAFT
30
30
30
30
30
31
31
31
32
32
32
32
32
32
32
32
33
33
34
34
34
34
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35

BORE
62
72
72
72
72
52
52
54
43
45
47
47
47
52
52
54
45
47
54
54
55
62
47
47
47
47
47
50
50
50
50
50
52
52
52
52
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
55

WIDTH
19.0
8.0
10.0
10.0
19.0
5.0
10.0
11.0
10.0
8.0
7.0
8.0
16.0
7.0
9.0
10.0
8.0
8.0
10.0
11.0
8.0
10.0
7.0
8.0
10.0
10.0
16.0
7.0
7.0
8.0
10.0
16.0
7.0
10.0
10.0
16.0
10.0
10.0
10.0
10.0
10.0
10.0
11.0
11.0
13.0
13.0
15.0
16.0
17.0
17.0
17.0
8.0

MODEL NO.

PART NO.

IG
92
63
94
IG
76
63
63
26
61
92
61
IG
92
61
61
61
61
63
63
26R1
63
92
61
61
61
IG
61
92
26R1
61
IG
26
63
62
IG
66
67
62
68
26
76
63
62
63
62
63F1
63F1
63R1
63R2
63T2
92

29500-5584
27063-0348
21158-4597
27223-4697
29500-4422
26193-7515
21158-8068
21158-0413
24600-0449
24060-2224
27063-0350
24060-1776
29500-4922
27063-0364
24060-2212
24060-2784
24060-1784
24060-1785
21158-0514
21158-0515
24620-0574
21158-8072
27063-0366
24060-1787
24060-1788
24060-1788
29500-4924
24060-2119
27063-0368
24620-0572
24060-1789
29500-4925
24600-1139
21158-6655
21702-6655
29500-4926
21527-0541
21528-0541
21702-0541
21823-0541
24600-1829
26193-0541
21158-0542
21702-0542
21158-0543
21702-0543
23078-7567
23078-9833
23547-6479
23548-6479
23550-6479
27063-0371

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-2

Rev. 1/01

Garlock
SHAFT
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
36
36
36
37
37
38
38
38
38
38
38
38
38
39
39
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40

Oil Seals by Shaft Size (Metric)

BORE

WIDTH

55
55
55
57
60
62
62
62
62
62
72
72
72
72
73
80
80
88
88
47
52
54
50
52
54
54
54
55
55
55
55
62
62
70
52
52
52
52
55
55
55
56
58
58
58
60
60
60
62
62
62
62

11.0
16.0
19.0
10.0
16.0
7.0
8.0
10.0
10.0
13.0
8.0
10.0
10.0
10.0
10.0
10.0
16.0
12.5
13.0
7.0
10.0
7.0
8.0
8.0
7.0
8.0
10.0
7.0
10.0
16.0
17.5
7.0
10.0
10.0
7.0
7.0
16.0
17.5
7.0
8.0
10.0
7.0
8.0
10.0
16.0
9.0
10.0
19.0
7.0
8.0
9.5
10.0

MODEL NO.
26R1
EQ
IG
26
EQ
92
94
63
66
26
94
63
67
68
63
94
EQ
EQ
26
92
63
92
92
92
61
61
61
92
61
IG
EQ
92
63
63
26
92
IG
EQ
92
61
61
92
92
61
IG
26
61
IG
92
61
61
63

PART NO.
24620-0573
24801-2260
29500-4529
24600-0575
24801-1752
27063-0376
27223-5091
21158-6658
21527-6658
24600-0708
27223-6639
21158-4584
21528-4584
21823-4584
21158-9612
27223-6557
24801-3087
24801-0913
24600-0913
27063-0378
21158-7748
27063-0379
27063-9965
27063-6218
24060-1791
24060-1790
24060-1794
27063-0381
24060-1484
29500-4934
24801-2839
27063-0382
21158-8076
21158-0694
24600-5918
27063-0391
29500-4718
24801-1359
27063-0392
24060-2055
24060-1931
27063-0393
27063-0406
24060-2136
29500-5068
24600-0733
24060-1912
29500-5539
27063-0423
24060-0132
24060-8610
21158-7884

SHAFT
40
40
40
40
40
40
40
40
40
40
40
40
41
42
42
42
42
42
42
42
42
42
42
42
42
42
42
43
43
43
43
43
43
43
43
43
43
43
43
43
43
44
44
45
45
45
45
45
45
45
45
45

BORE

WIDTH

62
62
62
65
65
65
72
78
80
80
87
100
61
55
55
55
60
60
62
62
62
62
62
65
66
72
73
54
54
62
70
70
70
70
70
72
73
73
73
73
73
60
72
55
60
60
60
62
62
62
62
62

10.0
11.0
19.0
7.0
10.0
12.0
7.0
19.0
10.0
16.0
16.0
16.0
19.0
9.0
10.0
16.0
7.0
10.0
8.0
10.0
10.0
16.0
19.0
16.0
16.0
10.0
10.0
5.0
5.0
10.0
8.0
10.0
10.0
11.0
13.0
10.0
10.0
10.0
11.0
13.0
15.0
9.0
10.0
16.0
7.0
8.0
17.5
8.0
10.0
10.0
10.0
17.5

MODEL NO.
63
26R1
IG
26
61
26R1
92
IG
92
EQ
EQ
EQ
IG
26
26
IG
92
61
26
63
61
EQ
IG
EQ
EQ
63
63
76
92
63
61
63
66
63
63
63
63
66
63
63
63F1
26R1
63
IG
92
61
EQ
26R1
58
61
26
EQ

PART NO.
21158-8610
24620-0729
29500-4808
24600-1228
24060-1912
24620-1030
27063-0435
29500-4441
27063-0449
24801-2631
24801-3915
24801-3498
29500-4825
24600-0759
24600-0791
29500-4938
27063-0452
24060-1792
24600-1096
21158-8082
24060-1793
24801-2918
29500-5540
24801-2611
24801-2127
21158-8083
21158-0817
26193-7527
27063-7527
21158-7456
24060-2532
21158-0847
21527-0847
21158-0848
21158-0849
21158-7126
21158-0853
21527-0853
21158-0854
21158-0855
23078-9667
24620-0895
21158-7865
29500-4554
27063-0488
24060-1796
24801-3149
24620-0935
21003-1797
24060-1797
24600-1097
24801-1923

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-3

Oil Seals by Shaft Size (Metric)

SHAFT
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
46
46
46
46
46
46
47
48
48
48
48
48
48
48
48
48
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

BORE

WIDTH

65
65
65
65
65
65
67
70
72
72
72
72
75
75
80
85
85
90
100
70
72
73
73
80
90
65
62
65
65
65
70
70
72
72
73
62
65
65
65
65
65
65
67
68
68
68
68
69
70
70
70
70

7.0
8.0
10.0
10.0
10.0
19.0
12.5
19.0
8.0
9.0
10.0
19.0
8.0
19.0
10.0
10.0
19.0
19.0
19.0
13.0
10.0
10.0
15.0
10.0
13.0
10.0
8.0
10.0
10.0
17.5
16.0
19.0
8.0
16.0
16.0
7.0
8.0
8.0
9.0
10.0
10.0
17.5
17.5
8.0
9.0
16.0
17.5
19.0
10.0
10.0
10.0
10.0

MODEL NO.

PART NO.

61
61
63
61
26
IG
EQ
IG
92
26
61
IG
94
IG
92
92
IG
IG
IG
63
63
63
63F1
63
26
92
92
61
92
EQ
EQ
IG
92
EQ
IG
26R1
61
92
26R1
61
61
EQ
EQ
92
26R1
IG
EQ
IG
63
66
61
26

24060-1798
24060-1799
21158-9223
24060-9223
24600-4044
29500-5541
24801-1374
29500-4490
27063-0512
24600-9538
24060-1800
29502-5930
27223-8004
29500-4581
27063-0516
27063-0520
29502-5819
29502-5807
29500-4678
21158-0987
21158-8088
21158-0991
23078-6592
21158-8089
24600-1002
27063-0522
27063-0533
24060-0534
27063-0534
24801-2681
24801-1935
29500-4189
27063-0558
24801-4943
29500-5270
24620-1106
24060-0563
27063-0563
24620-7654
24060-1814
24061-1814
24801-3431
24801-2155
27063-0567
24620-1108
29500-4945
24801-1846
29500-4880
21158-1156
21527-1156
24060-1156
24600-1104

Garlock
SHAFT
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
52
52
52
52
52
54
54
54
54
54
54
54
54
54
54
54
54

BORE

WIDTH

70
70
70
72
72
72
72
72
72
72
73
73
73
73
73
75
75
75
75
76
80
80
80
80
81
81
81
81
90
90
90
90
110
110
110
68
68
72
75
80
72
73
73
73
73
73
73
73
73
73
73
73

16.0
17.5
19.0
8.0
10.0
10.0
10.0
10.0
12.0
16.0
10.0
10.0
10.0
13.0
17.0
8.0
12.5
16.0
19.0
19.0
8.0
9.5
10.0
16.0
10.0
10.0
12.0
16.0
10.0
10.0
16.0
19.0
9.0
9.5
10.0
8.0
15.9
8.0
16.0
19.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
11.0
11.0
12.0
13.0

MODEL NO.

PART NO.

EQ
EQ
IG
61
58
63
66
61
26R1
EQ
63
66
62
63
63F1
61
EQ
EQ
IG
IG
26
61
63
EQ
63
66
26
EQ
26R1
76
EQ
IG
26R1
26
94
92
IG
92
EQ
IG
63
63
66
67
62
68
26
25
63
26
63
63

24801-3225
24801-3229
29500-4819
24060-0571
21003-2902
21158-6656
21527-6656
24060-6656
24620-1107
24801-4947
21158-1162
21527-1162
21702-1162
21158-1164
23078-5215
24060-2422
24801-1127
24801-1197
29500-4700
29502-5632
24600-1103
24060-7415
21158-7415
24801-1975
21158-1180
21527-1180
24600-1155
24801-2969
24620-1953
26193-0373
24801-3600
29500-4553
24620-2621
24600-2621
27223-8005
27063-0572
29507-4948
27063-0573
24801-4660
29500-5533
21158-8112
21158-1321
21527-1321
21528-1321
21702-1321
21823-1321
24600-1321
25058-1321
21158-1322
24600-1320
21158-5688
21158-1323

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-4

Rev. 1/01

Garlock
SHAFT
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
56
56
56
56
56
56
57
58

Oil Seals by Shaft Size (Metric)

BORE

WIDTH

73
73
73
73
73
80
81
81
81
81
81
85
90
90
92
92
60
70
70
70
72
72
72
72
72
73
75
75
75
78
78
78
80
80
80
80
81
85
90
90
90
100
100
100
70
72
80
80
80
85
83
72

13.0
15.0
17.0
17.0
17.0
10.0
10.0
10.0
11.0
13.0
19.0
10.0
11.0
11.0
10.0
11.0
8.0
8.0
8.0
17.5
8.0
8.0
9.0
10.0
16.0
17.5
10.0
17.5
19.0
9.0
12.0
19.0
8.0
10.0
12.0
16.0
16.0
8.0
10.0
16.0
19.0
10.0
10.0
16.0
8.0
8.0
8.0
16.0
19.0
8.0
16.0
8.0

MODEL NO.

PART NO.

62
63F1
63F1
63R2
63T2
63
63
66
62
63
63F1
63
26
26R1
94
63
61
61
92
EQ
61
26R1
26
61
IG
EQ
92
EQ
IG
26R1
26R1
IG
92
26
76
EQ
EQ
92
94
EQ
IG
26
94
EQ
92
92
92
EQ
IG
92
EQ
92

21702-1323
23078-4916
23078-4592
23548-4592
23550-4592
21158-8353
21158-1339
21527-1339
21702-1340
21158-1341
23078-7787
21158-8354
24600-1355
24620-1355
27223-9670
21158-3902
24060-1833
24060-0574
27063-0574
24801-2675
24060-0882
24620-1369
24600-4260
24060-1835
29500-4952
24801-2485
27063-0575
24801-3505
29500-4492
24620-1371
24620-1370
29500-5542
27063-0576
24600-3587
26193-0345
24801-2005
24801-1805
27063-0585
27223-8006
24801-1906
29500-4744
24600-7209
27223-7209
24801-4447
27063-0588
27063-0606
27063-0629
24801-4201
29500-5545
27063-0633
24801-1981
27063-0745

SHAFT
58
58
58
58
58
58
58
58
58
58
58
59
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
61
61
61
61
61
61
62
62
62
62
62
62
62
62
62
62

BORE

WIDTH

72
80
80
80
85
85
90
90
92
92
112
80
75
75
75
75
78
78
80
80
80
80
80
80
80
80
80
80
82
84
85
90
90
90
110
110
80
85
90
92
92
100
55
76
80
80
81
81
85
85
85
85

17.5
8.0
10.0
12.5
10.0
10.0
10.0
16.0
10.0
13.0
19.0
8.0
8.0
8.0
8.0
16.0
9.0
10.0
8.0
9.5
10.0
10.0
16.0
16.0
16.0
17.5
19.0
19.0
12.0
16.0
8.0
8.0
14.0
16.0
11.1
13.0
10.0
10.0
10.0
10.0
10.0
10.0
19.0
16.0
10.0
10.0
10.0
17.0
10.0
10.0
10.0
16.0

MODEL NO.

PART NO.

EQ
92
63
EQ
63
92
63
EQ
63
63
IG
61
58
61
26R1
IG
26
26
92
61
26
61
EQ
EQ
IG
EQ
IG
IG
26R1
IG
92
92
26R1
EQ
61
58
63
63
63
63
62
63
IG
IG
63
61
63
63R2
63
23
92
EQ

24801-3657
27063-0635
21158-8363
24801-1985
21158-8364
27063-0642
21158-1543
24801-3025
21158-1546
21158-1548
29502-5931
24060-1838
21003-1490
24060-1490
24620-1605
29500-4458
24600-4258
24600-1565
27063-0653
24060-0653
24600-5115
24060-1839
24801-1348
24801-5431
29500-1348
24801-3639
29500-5543
29500-6231
24620-1606
29500-5126
27063-0672
27063-0683
24620-1031
24801-2488
24060-2584
21003-2488
21158-8371
21158-8372
21158-1708
21158-1711
21702-1711
21158-7926
29500-4860
29500-5139
21158-8373
24060-8373
21158-1729
23548-7136
21158-8374
25003-0793
27063-0793
24801-5488

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-5

Oil Seals by Shaft Size (Metric)

SHAFT
62
62
62
62
62
62
62
62
63
63
63
64
64
64
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
66
68
68
68
68
68
69

BORE

WIDTH

90
90
90
90
90
90
92
100
85
85
90
80
88
95
80
82
85
85
85
85
85
85
88
88
90
90
90
90
90
90
90
90
90
92
92
92
92
95
100
100
105
100
110
120
140
86
87
90
90
90
100
90

10.0
10.0
10.0
11.0
13.0
13.0
10.0
10.0
10.0
12.0
16.0
8.0
12.0
19.0
10.0
16.0
10.0
10.0
10.0
10.0
16.0
19.0
12.0
16.0
8.0
10.0
10.0
10.0
10.0
10.0
13.0
16.0
19.0
10.0
11.0
11.0
13.0
10.0
10.0
10.0
19.0
19.0
19.0
10.0
10.0
12.5
9.5
10.0
12.5
16.0
10.0
10.0

MODEL NO.
63
62
92
63
63
62
63
63
61
61
EQ
92
26
IG
61
IG
63
61
23
92
EQ
IG
26R1
EQ
63
63
61
61
23
92
63
EQ
IG
63
63
62
63
92
63
94
IG
IG
IG
94
94
EQ
23
92
EQ
EQ
92
63

PART NO.
21158-1750
21702-1750
27063-0684
21158-1751
21158-1752
21702-1752
21158-1753
21158-7927
24060-1843
24060-1845
24801-3568
27063-0698
24600-0829
29500-4747
24060-1847
29500-5544
21158-8378
24060-0710
25003-0710
27063-0710
24801-2816
29500-4532
24620-1859
24801-1858
21158-1861
21158-1888
24060-0729
24060-0729
25003-9162
27063-0729
21158-1890
24801-1883
29500-4721
21158-1891
21158-1892
21702-1892
21158-1893
27063-0733
21158-6300
27223-6300
29502-5646
29502-4966
29500-5367
27223-6301
27223-6302
24801-1747
25003-1722
27063-0735
24801-1984
24801-3023
27063-0749
21158-2017

Garlock
SHAFT
69
69
69
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
71
72
72
72
72
73
73
73
73
73
75
75

BORE

WIDTH

92
92
100
85
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
92
92
92
92
92
92
92
92
92
95
95
95
100
100
100
100
102
110
88
90
95
95
100
92
92
92
92
100
90
95

10.0
10.0
10.0
8.0
6.0
9.5
10.0
10.0
10.0
10.0
10.0
10.0
10.0
11.0
11.0
12.0
12.0
12.5
13.0
16.0
16.0
19.0
10.0
10.0
10.0
10.0
11.0
12.0
12.5
13.0
16.0
15.9
16.0
19.0
10.0
10.0
12.5
16.0
12.7
16.0
12.0
10.0
10.0
10.0
10.0
10.0
10.0
11.0
13.0
10.0
10.0
10.0

MODEL NO.
63
66
63
26R1
26
23
63
66
67
62
68
61
26
63
26
26R1
61
EQ
63
EQ
EQ
IG
63
66
67
68
63
26R1
EQ
63
EQ
IG
EQ
IG
63
92
EQ
EQ
26
EQ
26
92
23
92
92
63
62
63
63
63
61
92

PART NO.
21158-2020
21527-2020
21158-7933
24620-2026
24600-2071
25003-4765
21158-2038
21527-2038
21528-2038
21702-2038
21823-2038
24060-2038
24600-2070
21158-2039
24600-2039
24620-1032
24060-2814
24801-2067
21158-2040
24801-2059
24801-2919
29500-4969
21158-2041
21527-2041
21528-2041
21823-2041
21158-2042
24620-2027
24801-2078
21158-2043
24801-5095
29507-3107
24801-3107
29500-4192
21158-7934
27063-0759
24801-2087
24801-2250
24600-5598
24801-3989
24600-2077
27063-0770
25003-1039
27063-0776
27063-0791
21158-2115
21702-2115
21158-2116
21158-2117
21158-7938
24060-2377
27063-0797

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-6

Rev. 1/01

Garlock
SHAFT
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
78
78
79
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
81
81
81
81
81

Oil Seals by Shaft Size (Metric)

BORE

WIDTH

95
95
95
95
95
95
100
100
100
100
100
100
100
100
100
107
107
107
110
110
115
115
120
100
100
110
100
100
100
100
100
100
100
105
105
105
105
105
110
110
110
110
110
110
115
120
130
110
120
127
127
127

13.0
13.0
15.9
16.0
17.5
19.0
9.5
9.5
10.0
10.0
12.5
13.0
13.0
16.0
19.0
12.5
12.7
13.0
12.0
19.0
10.0
12.0
12.0
11.0
16.0
19.0
10.0
10.0
10.0
13.0
16.0
17.5
19.0
10.0
13.0
13.0
16.0
19.0
6.0
10.0
12.0
12.0
12.7
16.0
12.5
19.0
16.0
13.0
13.0
13.0
13.0
25.0

MODEL NO.

PART NO.

61
26
IG
EQ
EQ
IG
61
23
61
92
EQ
58
26
EQ
IG
23
23
26
92
IG
94
26R1
92
23
EQ
IG
61
26R1
23
26
EQ
EQ
IG
61
26
26R1
EQ
IG
26
92
53
23
23
EQ
EQ
IG
EQ
53
53
53
66
53T2

24060-1848
24600-3663
29507-3316
24801-3316
24801-3312
29500-4822
24060-2966
25003-2966
24060-0809
27063-0809
24801-1078
21003-1921
24600-0827
24801-2166
29500-4749
25003-2105
25003-2331
24600-2105
27063-0819
29502-5739
27223-5074
24620-2908
27063-0824
25003-4769
24801-3024
29502-5763
24060-1033
24620-1033
25003-1033
24600-2238
24801-2240
24801-3674
29500-4798
24060-2411
24600-2215
24620-2215
24801-2272
29500-4728
24600-2243
27063-0831
21086-7426
25003-7426
25003-1998
24801-3593
24801-2239
29500-5293
24801-5269
21086-7950
21086-8121
21086-2267
21527-2267
22897-8608

SHAFT
82
82
82
84
84
84
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
86
86
87
88
88
88
89
89
89
89
89
89
89
89
89
90
90
90
90
90
90

BORE

WIDTH

101
113
114
110
110
110
100
100
105
105
105
110
110
110
110
110
110
110
110
110
115
115
115
120
120
120
120
125
125
130
130
130
135
119
110
110
110
120
125
127
127
127
127
127
127
130
110
110
110
110
115
115

10.0
16.0
13.0
10.0
14.0
16.0
10.0
17.5
10.0
13.0
16.0
10.0
12.0
12.0
12.0
12.5
12.7
13.0
16.0
19.0
13.0
14.0
16.0
12.0
12.0
12.0
16.0
12.0
19.0
13.0
16.0
19.0
19.0
12.0
12.0
12.7
15.0
13.0
14.0
13.0
13.0
13.0
16.0
18.0
23.0
13.0
10.0
12.0
13.0
16.0
12.0
12.0

MODEL NO.

PART NO.

26
EQ
23
61
26
EQ
61
EQ
61
26
EQ
61
26
23
57
23
23
26
EQ
IG
92
EQ
EQ
53
26R1
23
EQ
53
IG
94
EQ
IG
IG
26
92
23
26R1
53
53
53
53
66
53
53F1
53R2
53
61
26R1
26
EQ
23
61

24600-2111
24801-3109
25003-1590
24060-1850
24600-2562
24801-1988
24060-1851
24801-5104
24060-1853
24600-2310
24801-2523
24060-1854
24600-2214
25003-2214
26056-2214
25003-2137
25003-5650
24600-5343
24801-3161
29500-4193
27063-0833
24801-3584
24801-2311
21086-7394
24620-7394
25003-7394
24801-5521
21086-7399
29500-4816
27223-6314
24801-5110
29500-4748
29500-4750
24600-4224
27063-0834
25003-1772
24620-0846
21086-7963
21086-8877
21086-2378
21086-7253
21527-2378
21086-2380
22987-7332
22627-7324
21086-7965
24060-1856
24620-2437
24600-5002
24801-3265
25003-9963
24060-9963

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-7

Oil Seals by Shaft Size (Metric)

SHAFT
90
90
90
90
90
90
90
90
90
90
90
90
90
90
92
92
92
92
92
92
95
95
95
95
95
95
95
95
95
95
95
95
95
95
95
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100

BORE

WIDTH

115
115
115
115
120
120
120
120
120
120
120
120
120
126
120
127
127
127
127
130
115
120
120
120
120
120
120
120
120
125
125
125
130
130
140
120
120
120
120
120
120
120
125
125
125
125
125
125
125
125
125
125

12.5
12.7
13.0
13.0
12.0
12.0
12.0
12.0
13.0
13.0
13.0
16.0
19.0
19.0
13.0
13.0
14.0
16.0
18.0
13.0
12.0
10.0
12.0
12.0
12.0
13.0
13.0
13.0
16.0
12.0
12.0
19.0
12.0
16.0
19.0
10.0
11.0
12.0
12.7
13.0
16.0
19.0
6.5
10.0
11.0
12.0
12.5
12.7
13.0
13.0
16.0
19.0

Garlock

MODEL NO.

PART NO.

SHAFT

23
23
26
26R1
53
23
61
92
53
26
23
EQ
IG
IG
53
53
53
53
53F1
53
92
61
26R1
23
92
26R1
23
57
EQ
23
92
IG
92
EQ
IG
92
58
61
23
26R1
EQ
IG
26
23
23
92
23
23
26
26R1
EQ
IG

25003-8803
25003-4846
24600-5344
24620-5344
21086-7839
25003-7839
24060-7839
27063-7839
21086-8429
24600-2457
25003-8429
24801-2902
29500-4758
29500-4844
21086-7968
21086-2426
21086-5582
21086-2428
22987-5646
21086-7970
27063-0850
24060-1859
24620-9190
25003-9190
27063-9190
24620-6061
25003-6061
26057-6061
24801-3021
25003-1010
27063-1010
29500-4979
27063-0851
24801-2972
29500-4751
27063-0852
21003-4263
24060-2242
25003-9284
24620-9030
24801-1347
29500-4980
24600-1907
25003-0811
25003-5363
27063-0860
25003-1875
25003-3248
24600-5345
24620-5345
24801-2230
29500-4649

100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
101
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
107
108
110
110
110
110
110
110
110
110
110
110
110
110
110
110
110

BORE

WIDTH

126
127
127
127
127
127
127
127
128
130
130
130
130
130
130
130
130
135
170
141
130
130
130
130
130
130
130
135
135
135
135
140
140
140
140
148
127
126
130
130
130
130
130
135
135
137
140
140
140
140
140
140

19.0
12.0
13.0
13.0
13.0
14.0
16.0
23.0
10.0
9.5
12.0
12.0
12.7
13.0
13.0
16.0
19.0
16.0
10.0
16.0
12.0
12.0
12.0
12.7
13.0
16.0
19.0
12.7
14.0
14.0
14.0
12.0
12.0
16.0
19.0
19.0
11.0
16.0
9.0
12.0
13.0
16.0
17.5
11.0
12.7
12.7
12.0
12.0
12.0
12.0
12.7
13.0

MODEL NO.

PART NO.

IG
23
53
62
26
53
53
53R1
23
23
53
92
23
53
61
EQ
IG
EQ
26
26
23
92
57
23
23
EQ
IG
23
26
26R1
23
23
92
EQ
IG
IG
26
IG
26
26R1
26
EQ
EQ
23
23
23
53
61
26R1
23
23
61

29500-5072
25003-6129
21086-2519
21702-2519
24600-5913
21086-2520
21086-2521
22537-5049
25003-1000
25003-3229
21086-7842
27063-7842
25003-7979
21086-7979
24060-7979
24801-1346
29500-4859
24801-4091
24600-5924
24600-4225
25003-8768
27063-8768
26058-8768
25003-2000
25003-6052
24801-2625
29500-4981
25003-5763
24600-5353
24620-1034
25003-5353
25003-0866
27063-0866
24801-5309
29500-4982
29500-4835
24600-2653
29500-5266
24600-3260
24620-2034
24600-2686
24801-3318
24801-3315
25003-5364
25003-2626
25003-0587
21086-7396
24060-7396
24620-7396
25003-7396
25003-9567
24060-1502

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-8

Rev. 1/01

Garlock
SHAFT
110
110
110
110
110
110
110
110
110
110
110
112
113
113
115
115
115
115
115
115
115
115
115
115
118
118
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
124
125
125
125

Oil Seals by Shaft Size (Metric)

BORE

WIDTH

140
140
140
140
140
140
140
140
140
150
170
145
140
162
140
140
140
140
140
140
145
145
145
145
128
142
140
140
140
145
145
145
150
150
150
150
150
150
150
150
150
150
150
150
155
160
160
160
160
150
150
150

13.0
13.0
14.0
14.0
14.0
14.0
16.0
19.0
19.0
16.0
13.0
14.0
12.5
19.0
11.0
12.0
12.0
12.0
12.0
16.0
12.0
14.0
14.0
20.0
16.0
16.0
13.0
13.0
19.0
11.0
11.0
12.7
11.0
12.0
12.0
12.0
12.7
13.0
13.0
14.0
14.0
15.0
15.0
16.0
13.0
12.0
12.0
12.0
10.5
12.0
12.0
12.0

MODEL NO.

PART NO.

SHAFT

26
26R1
58
26R1
59
23
EQ
IG
IG
23
94
58
53
IG
23
53
26R1
23
57
EQ
92
26
23
26R1
IG
EQ
61
26
IG
26
23
23
23
53
23
92
23
61
26R1
26
23
53
26R1
EQ
23
53
26
23
23
58
23
92

24600-2731
24620-2731
21003-4264
24620-2703
24700-2703
25003-5346
24801-1082
29500-4984
29502-4984
25003-6992
27223-4488
21003-2262
21086-2818
29500-4841
25003-5365
21086-7271
24620-2279
25003-7271
26059-2779
24801-2780
27063-0869
24600-0841
25003-5347
24620-3419
29500-5326
24801-5510
24060-1862
24600-1855
29500-5550
24600-0994
25003-5366
25003-2634
25003-8242
21086-7376
25003-7376
27063-7376
25003-5118
24060-1880
24620-2863
24600-5348
25003-5348
21086-7277
24620-7277
24801-3179
25003-1303
21086-7836
24600-7836
25003-7836
25003-1707
21003-2887
25003-2887
27063-2887

125
125
125
125
125
125
125
125
125
125
125
127
127
127
130
130
130
130
130
130
130
130
130
130
130
132
135
135
135
135
135
135
135
135
135
135
138
138
140
140
140
140
140
140
140
140
140
140
140
140
140
140

BORE

WIDTH

150
154
155
155
155
160
160
160
160
170
175
152
159
181
159
160
160
160
160
160
160
160
160
160
168
160
164
165
165
165
168
170
170
170
170
170
178
181
160
165
165
165
165
170
170
170
170
170
170
170
170
170

15.0
12.4
14.0
14.0
16.0
12.0
13.0
15.0
18.0
12.0
16.0
27.0
19.0
13.0
12.0
12.0
12.0
12.0
13.0
14.0
14.0
15.0
15.0
16.0
16.0
12.7
12.4
8.0
14.0
16.0
18.0
12.0
13.0
15.0
15.0
16.0
16.0
13.0
13.0
10.0
12.5
12.7
16.0
8.0
12.0
12.0
13.0
14.0
14.0
14.0
15.0
15.0

MODEL NO.

PART NO.

23
23
26R1
23
EQ
92
23
26
23
26R1
EQ
IGSPB
IG
53
23
23
92
57
23
58
26R1
26
23
EQ
23
23
23
61
23
EQ
26
23
26
26R1
23
EQ
26
53
26R1
61
23
23
EQ
26
23
92
23
53
61
26R1
53
26

25003-1259
25003-5377
24620-5354
25003-5354
24801-5089
27063-0873
25003-2293
24600-2889
25003-1397
24620-2890
24801-2930
29506-7102
29500-4203
21086-2942
25003-5367
25003-4656
27063-4656
26059-4656
25003-7221
21003-2989
24620-2989
24600-2988
25003-2988
24801-3022
25003-0956
25003-9275
25003-5378
24060-1884
25003-5355
24801-5088
24600-2047
25003-9175
24600-9175
24620-3118
25003-3118
24801-3162
24600-4226
21086-3164
24620-3201
24060-1898
25003-2019
25003-0674
24801-5140
24600-3203
25003-1718
27063-1718
25003-9158
21086-7383
24060-7383
24620-7383
21086-7267
24600-7267

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-9

Oil Seals by Shaft Size (Metric)

SHAFT
140
140
140
140
140
140
140
140
140
140
142
143
143
145
145
145
145
145
146
146
150
150
150
150
150
150
150
150
150
150
150
150
150
150
154
155
155
155
155
160
160
160
160
160
160
160
160
160
160
160
160
160

BORE

WIDTH

170
170
170
170
173
175
175
180
180
180
162
181
181
175
175
175
180
180
180
181
180
180
180
180
180
180
180
180
180
180
180
180
190
190
179
174
180
180
180
184
185
190
190
190
190
190
190
190
190
190
190
190

15.0
15.0
16.0
16.0
14.0
18.0
18.0
15.0
16.0
16.0
19.0
13.0
19.0
14.0
14.0
15.0
15.0
16.0
15.0
13.0
12.0
13.0
14.0
14.0
14.0
14.0
14.0
15.0
15.0
16.0
16.0
18.0
15.0
15.0
19.0
12.0
13.0
15.0
15.0
14.0
10.0
8.0
12.7
13.0
13.0
14.0
15.0
15.0
15.0
15.0
15.0
16.0

MODEL NO.
23
57
59
23
23
26
23
61
26
23
IG
53
23
26R1
23
57
23
23
23
53
92
23
26
26R1
59
23
57
58
23
EQ
23
23
26
23
IG
26
23
26R1
59
23
92
26
23
23
57
53
53
26
26R1
23
57
26

PART NO.
25003-7267
26059-7267
24700-1134
25003-5861
25003-5368
24600-3204
25003-3204
24060-2461
24600-2098
25003-3148
29500-5549
21086-3240
25003-6368
24620-5349
25003-5349
26057-0958
25003-4415
25003-3197
25003-0519
21086-3284
27063-0875
25003-1111
24600-5335
24620-5335
24700-5335
25003-5335
26056-5335
21003-3327
25003-3327
24801-1349
25003-2341
25003-4862
24600-4395
25003-2233
29500-4309
24600-3326
25003-1269
24620-3352
24700-3352
25003-1394
27063-0876
24600-3404
25003-4634
25003-7816
26057-7816
21086-7286
21086-7276
24600-7276
24620-7276
25003-7276
26059-7276
24600-3913

Garlock
SHAFT
160
160
160
160
160
160
162
162
162
162
162
165
165
165
165
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
170
175
175
175
175
175
175
178
180
180
180
180
180
180
180
180
180
180
180
180
180
180

BORE

WIDTH

190
190
195
200
200
200
200
200
200
200
200
190
200
200
200
194
195
200
200
200
200
200
200
200
200
200
200
200
200
203
210
200
200
200
205
215
215
218
200
205
210
210
210
210
210
210
210
210
213
215
220
220

16.0
16.0
18.0
12.0
14.0
16.0
13.0
16.0
16.0
19.0
19.0
13.0
12.0
16.0
19.0
14.0
12.5
8.0
12.0
12.5
13.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
14.0
16.0
12.0
12.7
15.0
15.0
16.0
16.0
16.0
15.0
13.0
12.0
12.5
15.0
15.0
15.0
15.0
16.0
16.0
14.0
15.9
15.9
16.0

MODEL NO.
EQ
23
26R1
23
59
21
53
53
26
53
23
58
24
53
23
23
23
26
23
23
57
53
26R1
59
23
57
26
59
EQ
23
26
23
23
23
23
53
23
26
26
23
23
23
53
61
26R1
23
26
57
23
EQ
23
59

PART NO.
24801-3913
25003-3913
24620-1035
25003-1717
24700-4038
25001-4633
21086-3421
21086-3423
24600-3423
21086-3424
25003-3424
21003-0584
25005-8171
21086-3432
25003-9217
25003-1395
25003-0637
24600-3451
25003-2826
25003-5356
26057-0783
21086-7268
24620-3919
24700-7268
25003-7268
26059-7268
24600-3919
24700-3919
24801-3180
25003-5370
24600-3329
25003-1709
25003-3251
25003-4624
25003-2457
21086-7495
25003-1388
24600-4227
24600-5919
25003-1616
25003-2828
25003-5336
21086-7807
24060-7807
24620-3920
25003-7807
24600-3920
26056-3920
25003-5371
24802-5625
25003-9994
24700-4039

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-10

Rev. 1/01

Garlock
SHAFT
185
185
185
189
189
190
190
190
190
190
190
190
190
190
190
190
190
190
190
190
195
195
196
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
208
210
210
210
210
210
210

Oil Seals by Shaft Size (Metric)

BORE

WIDTH

210
215
225
225
227
214
215
215
220
220
220
220
220
220
220
225
225
225
230
235
230
230
220
224
225
230
230
230
230
230
230
230
230
230
230
230
230
235
235
236
238
240
240
240
240
238
240
240
240
240
249
250

12.7
15.0
16.0
16.0
19.0
12.0
12.7
16.0
12.0
12.5
15.0
15.0
15.0
16.0
19.0
16.0
16.0
16.0
16.0
16.0
15.0
15.0
12.0
12.7
15.0
13.0
14.0
14.0
14.0
15.0
15.0
15.0
15.0
15.0
15.0
16.0
19.0
15.0
16.0
19.0
19.0
15.5
16.0
20.0
20.0
15.0
12.0
15.0
15.0
15.0
22.0
14.0

MODEL NO.

PART NO.

SHAFT

23
23
23
26R1
23
23
23
26
23
23
61
59
23
23
IG
26R1
23
57
23
26
59
23
23
23
23
53
26
26R1
23
58
53
61
26R1
59
23
59
59
57
26
23
23
23
23
26
26R1
26
23
26
26R1
23
26
53

25003-0801
25003-2643
25003-7006
24620-3923
25003-9792
25003-1290
25003-2581
24600-4997
25003-0504
25003-5333
24060-8049
24700-2043
25003-8049
25003-1379
29500-4756
24620-1036
25003-3911
26057-3911
25003-1214
24600-3758
24700-2183
25003-7320
25003-0980
25003-4860
25003-1949
21086-4834
24600-3914
24620-3914
25003-3914
21003-7388
21086-7388
24060-7388
24620-7388
24700-7388
25003-7388
24700-5317
24700-3301
26056-1727
24600-3908
25003-6926
25003-1014
25003-5372
25003-8420
24600-3916
24620-3916
24600-2147
25003-2833
24600-5338
24620-5338
25003-5338
24600-5231
21086-7887

210
215
215
215
215
215
216
216
216
216
216
216
216
216
216
219
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
225
225
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
235

BORE

WIDTH

250
240
245
245
248
250
254
254
254
254
254
254
254
254
254
254
250
250
250
250
250
250
250
250
250
260
260
260
260
260
260
260
260
250
265
255
260
260
260
260
268
269
269
270
270
270
270
270
276
280
280
275

16.0
12.7
12.5
15.0
15.0
16.4
16.0
16.0
18.0
19.0
19.0
19.0
19.0
26.0
32.0
19.0
12.0
13.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
13.0
15.0
16.0
16.0
19.0
20.0
22.0
22.0
12.5
16.0
12.7
15.0
15.0
15.0
15.0
19.0
22.0
22.0
14.0
14.0
15.0
16.0
16.0
17.5
16.0
16.0
0.0

MODEL NO.

PART NO.

21
23
23
23
23
23
53
59
64
53
62
21
23
53F1
53F1
59
23
23
53
62
26R1
59
23
26
23
53
23
59
23
23
23
26
26R1
23
23
23
26
59
23
87
23
26
26R1
53
59
59
59
23
23
59
23
61

25001-9521
25003-5402
25003-1953
25003-5358
25003-0961
25003-0746
21086-4602
24700-0012
21238-8453
21086-3937
21702-3937
25001-3937
25003-3937
22987-6760
22987-5681
24700-0014
25003-2829
25003-4757
21086-5357
21702-5357
24620-5357
24700-5357
25003-5357
24600-3942
25003-3942
21086-7840
25003-0891
24700-0019
25003-8606
25003-0957
25003-1392
24600-3944
24620-3944
25003-8481
25003-2247
25003-5403
24600-3955
24700-3955
25003-5334
26080-5334
25003-5784
24600-3956
24620-3956
21086-7890
24700-4035
24700-5814
24700-4763
25003-4885
25003-5374
24700-0036
25003-4865
24060-1909

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-11

Oil Seals by Shaft Size (Metric)

SHAFT
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
240
242
245
245
250
250
250
250
250
250
250
250
250
250
250
255
258
260
260
260
260
260
260
260
260
260
260
260
260
260
260

BORE

WIDTH

270
270
270
270
270
270
275
275
275
280
280
280
280
280
280
280
280
286
290
290
300
320
272
283
305
280
280
280
280
280
280
280
285
290
290
296
290
290
290
290
290
290
298
300
300
300
300
304
304
306
308
310

15.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
18.0
13.0
15.0
16.0
16.0
19.0
19.0
19.0
20.0
17.5
16.0
19.0
25.0
25.0
15.0
20.6
25.0
12.7
15.0
15.0
15.0
15.0
15.0
16.0
16.0
15.0
16.0
17.5
16.0
16.0
15.0
15.0
16.0
16.0
19.0
13.0
16.0
20.0
20.0
20.0
20.0
17.5
20.0
16.0

MODEL NO.
53
26
26R1
59
23
59
26
57
23
23
26
53
23
26
26R1
23
23
23
23
26R1
59
26
26
23
26R1
23
53
62
26R1
59
23
26
23
23
23
23
59
23
26
23
26
59
23
53
23
26
59
23
87
23
23
23

PART NO.
21086-5359
24600-5359
24620-5359
24700-5359
25003-5359
24700-0053
24600-3910
26057-3910
25003-1036
25003-1097
24600-2041
21086-7891
25003-7891
24600-3973
24620-3973
25003-3973
25003-9435
25003-5380
25003-3132
24620-3974
24700-0054
24600-0828
24600-2149
25003-2256
24620-1837
25003-9676
21086-5339
21702-5339
24620-5339
24700-5339
25003-5339
24600-4345
25003-1099
25003-4497
25003-8607
25003-5375
24700-4767
25003-0695
24600-5351
25003-5351
24600-5111
24700-5111
25003-5665
21086-7892
25003-7010
24600-5429
24700-5429
25003-4805
26080-4805
25003-5381
25003-1292
25003-0872

Garlock
SHAFT

BORE

WIDTH

260
260
260
265
270
270
270
270
270
270
270
270
270
270
270
270
274
275
275
275
279
280
280
280
280
280
280
280
280
280
280
280
280
280
280
280
284
285
285
289
289
289
290
290
290
290
290
292
300
300
300
300

311
315
320
290
300
300
300
308
308
308
308
310
310
310
314
335
304
305
310
310
309
310
310
310
316
318
320
320
320
320
320
320
320
330
340
340
330
315
329
327
327
327
330
330
330
330
350
327
330
330
332
335

19.0
24.0
25.0
15.9
15.0
16.0
16.0
18.0
19.0
19.0
19.0
16.0
16.0
20.0
20.0
18.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
20.0
18.0
18.0
16.0
18.0
20.0
20.0
20.0
20.0
20.0
15.5
21.0
25.0
15.8
20.0
20.0
19.0
19.0
19.0
16.0
18.0
20.0
20.0
25.0
18.0
15.0
16.0
16.0
18.0

MODEL NO.
23
59
59
23
23
26
59
64
53
59
23
59
23
26R1
23
59
26
26
26
23
23
59
23
23
26
23
53
59
64
26
59
23
88
23
64
59
23
23
23
53
59
23
59
23
26R1
23
59
59
23
23
59
23

PART NO.
25003-2314
24700-4891
24700-4999
25003-2613
25003-5350
24600-5445
24700-0094
21238-7769
21086-4018
24700-0095
25003-4018
24700-8655
25003-8655
24620-2965
25003-1027
24700-0099
24600-2148
24600-1040
24600-3722
25003-2350
25003-1246
24700-0982
25003-2582
25003-0890
24600-5233
25003-1962
21086-7848
24700-4028
21238-7391
24600-3695
24700-3695
25003-7391
26088-7391
25003-0897
21238-4039
24700-0109
25003-0740
25003-1262
25003-5712
21086-4050
24700-0119
25003-4050
24700-4042
25003-0416
24620-3886
25003-1031
24700-3100
24700-0125
25003-5352
25003-0740
24700-4009
25003-5446

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-12

Rev. 1/01

Garlock

Oil Seals by Shaft Size (Metric)

SHAFT

BORE

WIDTH

300
300
300
300
300
300
300
300
300
300
300
300
310
310
310
310
310
315
315
310
320
320
320
320
320
320
320
320
320
320
320
320
324
324
324
324
324
324
325
325
327
330
330
330
330
330
330
330
330
330
332
340

338
340
340
340
340
344
344
344
344
345
350
350
335
340
350
354
354
355
360
360
350
355
358
360
360
360
360
360
360
362
364
364
362
362
362
362
381
381
365
365
381
360
360
360
370
370
374
374
374
390
370
372

19.0
16.0
18.0
20.0
20.6
20.0
20.0
20.5
21.0
22.0
19.0
26.0
12.7
15.0
20.0
20.0
20.0
18.0
20.0
25.0
16.0
16.0
19.0
18.0
18.0
19.0
20.0
20.0
20.0
20.7
20.0
20.0
16.0
18.0
19.0
19.0
21.0
22.0
16.0
16.0
21.0
10.0
15.0
15.0
18.0
18.0
19.0
20.0
20.0
25.0
19.0
16.0

MODEL NO.

PART NO.

23
53
59
23
23
59
23
23
88
26R1
23
59
23
23
59
23
87
59
23
59
59
59
23
23
59
23
26
59
23
23
26
23
59
64
26
23
64
59
59
23
64
23
26
23
59
23
23
59
23
59
23
59

25003-9793
21086-7893
24700-0134
25003-4655
25003-0947
24700-4056
25003-4602
25003-8525
26088-8525
24620-1037
25003-4881
24700-0135
25003-5536
25003-5340
24700-0999
25003-2454
26080-2454
24700-4029
25003-1108
24700-5693
24700-0162
24700-0163
25003-5667
25003-1113
24700-1966
25003-1712
24600-4397
24700-4397
25003-1103
25003-1182
24600-3721
25003-2911
24700-0168
21238-4089
24600-5942
25003-5942
21238-4092
24700-0170
24700-4058
25003-3209
21238-5404
25003-0590
24600-5341
25003-5341
24700-0174
25003-9996
25003-3170
24700-5525
25003-4630
24700-1000
25003-0994
24700-0188

SHAFT

BORE

WIDTH

340
340
340
340
340
340
340
340
340
343
343
343
343
343
343
343
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
355
355
356
356
360
360
360
360
360
360
360
360
360
360
360
365
368
370
370

378
380
380
380
380
380
380
384
385
381
381
381
381
381
381
381
380
380
380
388
388
390
390
394
394
394
394
394
399
400
400
410
410
395
420
381
394
390
390
390
396
400
400
400
400
400
404
425
403
419
395
410

19.0
16.0
17.5
18.0
18.0
18.0
20.0
20.0
20.0
16.0
17.0
17.0
18.0
18.0
19.0
19.0
10.0
16.0
20.0
12.7
19.0
16.0
18.0
12.7
19.0
20.0
20.0
20.0
20.0
17.0
25.0
20.0
25.0
20.0
15.0
18.0
19.0
18.0
18.0
18.0
16.0
16.0
18.0
18.0
20.0
20.0
20.0
22.0
19.0
20.6
12.7
20.0

MODEL NO.

PART NO.

23
53
59
26
59
23
59
23
23
59
26
26R1
53
64
53
23
23
59
59
23
23
23
59
23
59
26
59
23
23
59
59
59
59
59
88
26
23
26
59
23
23
53
26
59
59
23
87
59
23
87
23
26R1

25003-5664
21086-7896
24700-0189
24600-3882
24700-3882
25003-0893
24700-5170
25003-2245
25003-2286
24700-0190
24600-5456
24620-5456
21086-4121
21238-4121
21086-4122
25003-4122
25003-0591
24700-3212
24700-4755
25003-5477
25003-9316
25003-8656
24700-0204
25003-2109
24700-5107
24600-5102
24700-5102
25003-4603
25003-5874
24700-3490
24700-3091
24700-1902
24700-5477
24700-5441
26088-1924
24600-8815
25003-9287
24600-0992
24700-0992
25003-2066
25003-0963
21086-7849
24600-4394
24700-4394
24700-1892
25003-9182
26080-1202
24700-0221
25003-3250
26080-2134
25003-5845
24620-8196

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-13

Oil Seals by Shaft Size (Metric)

SHAFT

BORE

WIDTH

370
370
370
370
375
375
380
380
380
380
380
380
380
381
385
387
390
390
390
390
390
390
390
390
390
390
390
394
395
395
397
397
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
410
410
414
415

411
414
415
420
415
420
420
420
420
424
424
440
440
426
425
417
420
428
430
430
430
434
434
440
440
450
450
420
439
439
435
435
438
440
440
440
444
444
444
444
444
450
450
450
450
450
450
460
450
460
464
465

16.0
20.0
20.0
20.0
16.0
20.0
15.9
20.0
20.0
20.0
20.0
25.0
25.0
29.0
20.0
15.0
14.0
19.0
18.0
19.0
20.0
20.0
20.0
20.0
25.0
17.0
25.0
12.7
19.0
23.0
19.0
19.0
19.0
16.0
20.0
20.0
17.0
20.0
20.0
20.0
20.0
18.0
18.0
18.0
19.0
20.0
20.6
25.0
20.0
22.0
20.6
20.0

MODEL NO.

PART NO.

23
59
59
23
23
59
23
59
23
59
23
26R1
59
26R1
23
59
23
23
59
23
26
59
23
59
59
64
59
23
26R1
26
59
23
23
59
26
59
23
23
26
59
87
64
59
23
59
23
23
26R1
59
26
23
59

25003-9993
24700-3880
24700-5694
25003-1968
25003-6994
24700-4423
25003-2328
24700-0247
25003-0614
24700-4674
25003-4601
24620-5466
24700-5466
24620-5146
25003-8464
24700-5299
25003-1608
25003-9796
24700-5172
25003-5290
24600-4941
24700-5281
25003-1767
24700-3950
24700-4936
21238-4166
24700-2049
25003-2206
24620-0979
24600-3867
24700-0265
25003-6455
25003-5666
24700-5064
24600-4396
24700-4396
25003-8702
25003-4629
24600-1332
24700-1332
26080-4629
21238-4169
24700-0268
25003-2389
24700-2726
25003-2069
25003-2275
24620-5467
24700-4512
24600-4015
25003-1280
24700-4002

Garlock
SHAFT

BORE

WIDTH

416
416
416
420
420
420
420
420
420
420
420
420
420
420
420
420
425
430
430
430
430
430
430
435
440
440
440
440
446
450
450
450
450
450
450
460
460
460
460
460
470
470
470
470
470
480
480
480
480
480
480
490

454
454
454
455
458
460
460
460
470
470
470
470
470
470
480
480
475
470
470
480
480
480
490
485
480
480
480
490
486
480
490
493
500
500
510
500
504
510
510
510
508
508
508
520
530
520
520
520
530
530
530
530

18.0
19.0
19.0
20.0
19.0
20.0
20.0
20.0
18.0
18.8
19.0
22.0
22.0
22.0
25.0
28.0
20.0
20.0
20.0
20.0
22.0
25.0
20.0
20.0
20.0
20.0
20.0
22.0
16.0
12.7
20.0
20.0
20.6
20.6
25.0
20.0
20.0
20.0
22.0
22.0
18.0
19.0
19.0
18.8
25.0
20.0
20.0
20.0
20.0
20.0
20.6
20.0

MODEL NO.

PART NO.

64
59
23
23
23
64
59
23
64
23
23
64
26
59
26R1
26R1
23
59
23
23
59
59
64
87
26
59
23
59
88
23
59
23
21
23
59
59
23
23
26
59
64
59
23
23
59
23
26
64
59
23
23
59

21238-4179
24700-0286
25003-5178
25003-2625
25003-5725
21238-8504
24700-0295
25003-8504
21238-8792
25003-8705
25003-4521
21238-1929
24600-1331
24700-1331
24620-5468
24620-1038
25003-9529
24700-4252
25003-4510
25003-5029
24700-3740
24700-4253
21238-9695
26080-1387
24600-4393
24700-4393
25003-4393
24700-4673
26088-4704
25003-0510
24700-3943
25003-9925
25001-3111
25003-1179
24700-5464
24700-4508
25003-0518
25003-1237
24600-4486
24700-4486
21238-3768
24700-0338
25003-9881
25003-8695
24700-4255
25003-7281
24600-7281
21238-7281
24700-1247
25003-8299
25003-0639
24700-3133

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-14

Rev. 1/01

Garlock

Oil Seals by Shaft Size (Metric)

SHAFT

BORE

WIDTH

490
490
500
500
500
500
500
508
508
510
515
520
520
520
524
530
530
530
530
530
530
530
530
530
532
535
540
540
540
550
550
550
551
554
556
560
560
560
560
560
560
560
560
560
570
570
570
570
570
574
576
578

540
540
530
540
545
550
550
562
562
540
555
558
564
564
580
570
570
575
580
580
580
580
580
590
572
575
590
590
590
600
600
610
589
594
606
604
604
610
610
610
610
610
610
620
610
616
616
620
620
604
614
635

20.0
22.0
15.0
20.0
20.0
20.0
22.0
26.0
26.0
11.0
20.0
19.0
20.0
22.0
21.0
20.0
20.0
20.6
20.0
20.0
21.0
22.0
22.0
25.0
20.0
20.0
20.6
22.0
25.0
22.0
23.5
25.0
19.0
20.0
20.6
18.0
20.0
20.0
20.0
20.0
22.0
22.0
22.0
25.0
20.0
19.0
19.0
22.0
25.0
15.0
19.0
23.0

MODEL NO.

PART NO.

23
26
26
59
23
87
59
53
59
26
26
23
59
59
64
59
87
23
59
23
64
26
59
59
59
59
23
59
64
59
26
59
23
23
23
87
59
64
26
59
64
26
59
59
59
64
59
59
59
26
23
64

25003-1298
24600-4856
24600-2504
24700-4047
25003-2484
26080-1383
24700-1246
21086-4238
24700-0364
24600-5714
24600-5493
25003-5654
24700-4764
24700-4525
21238-4244
24700-5438
26080-2388
25003-5761
24700-0375
25003-1911
21238-4244
24600-3667
24700-3667
24700-3535
24700-5440
24700-5452
25003-9639
24700-4598
21238-7393
24700-2724
24600-5492
24700-4514
25003-5428
25003-0429
25003-0606
26080-1382
24700-4066
21238-7266
24600-3461
24700-3461
21238-2394
24600-4019
24700-4019
24700-4243
24700-3769
21238-4276
24700-0408
24700-4245
24700-4241
24600-2501
25003-5532
21238-6843

SHAFT

BORE

WIDTH

578
580
590
590
600
600
600
600
600
600
610
610
620
620
620
624
630
630
640
650
650
650
665
670
670
670
670
670
685
690
700
700
710
720
730
730
730
730
735
740
740
750
750
750
760
760
760
770
770
780
780
800

635
640
630
640
630
640
640
650
650
660
654
660
670
670
670
654
665
670
690
690
705
710
729
708
710
716
716
734
710
730
738
764
773
770
790
794
794
794
775
780
790
800
800
814
800
810
813
845
845
820
844
864

23.0
25.0
20.0
20.0
11.0
20.0
20.0
22.0
25.0
25.0
20.0
20.6
20.6
22.0
22.0
15.0
14.3
19.0
20.5
20.0
20.0
25.0
22.0
19.0
20.0
19.0
23.0
25.0
12.7
20.0
19.0
25.0
22.0
25.0
25.0
19.0
25.0
25.5
20.0
17.0
25.0
20.0
23.0
19.0
20.0
25.0
22.0
27.0
28.0
18.0
25.0
25.0

MODEL NO.

PART NO.

59
59
59
23
26
64
59
59
59
59
23
23
23
26
59
26
87
64
23
59
59
59
59
23
59
59
64
59
23
59
23
26
59
23
59
23
59
59
59
59
59
23
23
23
59
59
59
59
59
23
59
59

24700-0417
24700-4256
24700-3134
25003-2674
24600-5715
21238-8624
24700-5280
24700-4519
24700-5559
24700-4518
25003-1112
25003-7119
25003-0864
24600-3678
24700-3678
24600-2505
26080-2884
21238-1451
25003-1719
24700-1044
24700-4244
24700-4517
24700-3163
25003-2248
24700-3945
24700-0464
21238-4307
24700-4672
25003-1169
24700-3489
25003-4481
24600-5067
24700-4239
25003-0786
24700-4516
25003-2796
24700-2543
24700-4487
24700-5442
24700-0497
24700-5609
25003-3165
25003-3169
25003-2079
24700-4917
24700-3132
24700-3837
24700-4875
24700-4578
25003-1959
24700-1933
24700-5560

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

Metric-15

Oil Seals by Shaft Size (Metric)

SHAFT

BORE

WIDTH

810
850
851
851
860
900
900
920
950
960
960
970
970
990
990
1000
1000
1000
1020
1060
1080
1105
1162
1250
1295
1350
1380
1380
1425
1550
1620
1636
1820
1890
2100

874
895
889
925
900
950
980
958
1014
1020
1040
1034
1040
1040
1040
1050
1050
1050
1050
1100
1144
1160
1207
1314
1325
1414
1430
1440
1482
1610
1665
1700
1870
1954
2150

25.0
20.0
23.0
23.0
20.0
20.0
23.0
19.0
25.0
22.0
23.0
22.0
25.0
22.0
25.0
22.0
22.0
23.0
19.0
20.0
25.0
25.0
20.0
25.0
20.0
22.0
25.0
25.0
19.0
25.0
20.0
22.0
20.6
25.0
20.6

MODEL NO.

PART NO.

59
23
64
64
59
23
59
64
59
59
59
59
59
59
59
64
59
59
23
59
59
64
23
59
87
64
23
64
23
64
59
64
23
64
23

24700-4671
25003-6894
21238-9504
21238-4552
24700-1043
25003-4872
24700-5620
21238-7770
24700-4824
24700-2991
24700-0565
24700-4455
24700-4240
24700-4100
24700-4240
21238-1073
24700-3080
24700-2873
25003-4386
24700-4137
24700-3949
21238-0586
25003-6889
24700-4599
26080-2886
21238-7065
25003-9919
21238-8594
25003-9917
21238-8622
24700-3961
21238-4979
25003-4816
21238-9010
25003-8802

Garlock
SHAFT

BORE

WIDTH

MODEL NO.

PART NO.

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Metric-16

Rev. 1/01

Garlock
PART NO.
18231-0087
18231-0139
18231-0213
18231-0287
18231-0321
18231-0351
18231-6279
18231-7760
18231-9437
18231-7118
18231-5571
18231-0430
18231-6208
18231-7903
18231-6222
18231-7762
18231-9439
18231-7517
18231-5793
18231-0643
18231-6644
18231-8486
18231-6241
18231-9675
18231-7080
18231-7112
18231-7738
18231-8019
18231-0898
18231-5794
18231-9442
18231-1049
18231-8162
18231-7086
18231-9443
18231-9013
18231-7854
18231-6094
18231-1186
18231-1189
18231-7923
18231-7860
18231-7522
18231-1321
18231-9446
18231-7531
18231-7853
18231-1471
18231-7668
18231-9447
18231-1642
18231-4737

Model 79 Rod Scrapers (Inches)

ROD DIA.
0.625
0.750
0.875
1.000
1.063
1.125
1.188
1.250
1.250
1.250
1.250
1.250
1.375
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.625
1.690
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.875
1.875
1.969
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.125
2.125
2.125
2.250
2.250
2.250
2.250
2.250
2.375
2.375
2.500

BORE DIA.
1.125
1.250
1.375
1.500
1.575
1.625
1.625
1.625
1.750
1.752
1.752
2.062
1.875
1.875
1.875
1.969
2.000
2.000
2.125
2.250
2.125
2.250
2.125
2.250
2.250
2.250
2.250
2.257
2.438
2.506
2.375
2.563
2.362
2.375
2.500
2.500
2.500
2.502
2.686
2.750
2.750
2.500
2.625
2.875
2.750
2.750
2.750
2.997
3.000
2.875
3.125
2.875

BORE DEPTH
0.313
0.313
0.313
0.313
0.313
0.313
0.250
0.125
0.313
0.313
0.250
0.375
0.313
0.250
0.125
0.125
0.313
0.250
0.313
0.375
0.313
0.313
0.125
0.313
0.250
0.188
0.125
0.250
0.375
0.375
0.313
0.375
0.197
0.250
0.312
0.250
0.188
0.313
0.375
0.375
0.250
0.125
0.250
0.375
0.313
0.250
0.188
0.375
0.250
0.313
0.375
0.125

PART NO.
18231-9448
18231-5853
18231-7089
18231-8471
18231-1807
18231-7090
18231-8557
18231-5856
18231-5407
18231-9450
18231-7236
18231-2035
18231-6471
18231-8544
18231-9452
18231-7754
18231-2168
18231-4557
18231-7680
18231-7856
18231-5751
18231-9454
18231-7374
18231-5752
18231-5857
18231-9456
18231-5858
18231-2366
18231-7097
18231-7509
18231-2462
18231-8518
18231-8417
18231-8555
18231-9879
18231-5753
18231-4651
18231-8243
18231-9461
18231-9060
18231-7723
18231-7151
18231-2657
18231-9463
18231-8538
18231-9464
18231-5859
18231-2753
18231-7511
18231-9465
18231-2837
18231-8153

ROD DIA.
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.625
2.625
2.750
2.750
2.750
2.750
2.875
3.000
3.000
3.000
3.000
3.125
3.125
3.250
3.250
3.250
3.375
3.500
3.500
3.500
3.500
3.750
3.750
3.750
3.875
3.938
4.000
4.000
4.000
4.000
4.063
4.125
4.125
4.250
4.250
4.250
4.375
4.500
4.500
4.500
4.500
4.500
4.750
4.750
4.875

BORE DIA.
3.000
3.000
3.125
3.245
3.250
3.250
3.500
3.125
3.375
3.250
3.250
3.500
3.750
3.250
3.500
3.500
3.751
4.000
3.625
3.750
3.750
3.875
4.250
4.000
4.000
4.125
4.250
4.500
4.375
4.500
4.750
4.750
4.625
4.500
4.625
4.750
5.000
5.250
4.750
5.250
4.750
4.750
5.250
5.000
5.000
5.125
5.250
5.500
550D
5.375
5.750
5.619

BORE DEPTH
0.313
0.188
0.250
0.375
0.375
0.250
0.250
0.250
0.375
0.313
0.188
0.375
0.500
0.125
0.313
0.125
0.375
0.500
0.188
0.375
0.313
0.313
0.500
0.313
0.313
0.313
0.313
0.500
0.312
0.313
0.500
0.250
0.313
0.313
0.313
0.313
0.500
0.250
0.313
0.375
0.313
0.188
0.500
0.313
0.313
0.313
0.313
0.500
0.313
0.313
0.500
0.313

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

R-1

Model 79 Rod Scrapers (Inches)

PART NO.
18231-9466
18231-5750
18231-2915
18231-7528
18231-9468
18231-7534
18231-3228
18231-9469
18231-3275
18231-9470
18231-7541
18231-3355
18231-8556
18231-7477
18231-3426
18231-6721
18231-6372
18231-7574
18231-9565
18231-8545
18231-8547
18231-5484
18231-7897
18231-7224
18231-6811
18231-6067
18231-6391
18231-9693
18231-7263
18231-7684
18231-9732

ROD DIA.
5.000
5.000
5.000
5.250
5.500
5.500
5.625
5.750
5.750
6.000
6.000
6.000
6.375
6.500
6.500
6.750
6.750
7.000
7.250
7.250
7.250
7.500
7.766
8.000
9.000
9.750
10.000
11.000
11.500
13.375
14.625

BORE DIA.
5.625
5.750
6.000
6.000
6.125
6.250
6.625
6.375
6.750
6.625
6.750
7.000
7.125
7.248
7.500
7.375
7.750
7.750
8.000
8.250
8.500
8.250
8.750
8.750
9.875
10.750
11.000
12.000
12.750
14.625
16.125

BORE DEPTH

Garlock
PART NO.

ROD DIA.

BORE DIA.

BORE DEPTH

0.313
0.313
0.500
0.312
0.375
0.313
0.500
0.375
0.500
0.375
0.375
0.500
0.500
0.312
0.625
0.375
0.500
0.313
0.313
0.421
0.421
0.375
0.375
0.375
0.313
0.500
0.500
0.500
0.625
0.625
0.750

All dimensions are in inches. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
R-2

Rev. 1/01

Model 79 Rod Scrapers (Metric)

Garlock
PART NO.
18231-8460
18231-8461
18231-8462
18231-8463
18231-8464
18231-8430
18231-8431
18231-8432
18231-8433
18231-8434
18231-8157
18231-8435
18231-8436
18231-8437
18231-8470
18231-8438
18231-8439
18231-8158
18231-7666
18231-7793
18231-8440
18231-8161
18231-7799
18231-7653
18231-8475
18231-8441
18231-8162
18231-7663
18231-7654
18231-8488
18231-8442
18231-8163
18231-7809
18231-8474
18231-8412
18231-8443
18231-7780
18231-8444
18231-8419
18231-8520
18231-8445
18231-7665
18231-7657
18231-8446
18231-8221
18231-7922
18231-8522
18231-8146
18231-8447
18231-8165
18231-7732
18231-8524

ROD DIA.
6
8
10
12
14
16
18
20
22
25
25
28
30
32
35
36
40
40
40
40
45
45
45
45
45
50
50
50
50
50
55
55
55
55
55
56
56
60
60
60
63
63
63
65
65
65
65
70
70
70
70
70

BORE DIA.
14
16
18
22
24
26
28
30
32
35
35
38
40
42
50
46
50
50
50
55
55
55
55
60
60
60
60
60
65
65
65
65
65
70
70
66
71
70
70
75
73
73
78
75
75
75
80
80
80
80
80
83.5

BORE DEPTH
5
5
5
7
7
7
7
7
7
7
5
7
7
7
9
7
7
5
3.18
9
7
5
3.18
9
7
7
5
3.18
9
7
7
5
3.18
7
5
7
9
7
5
7
7
3.18
9
7
5
3.18
7
9
7
5
3.18
6

PART NO.
18231-8472
18231-8521
18231-8167
18231-7977
18231-8473
18231-8280
18231-8327
18231-7733
18231-8534
18231-8468
18231-8448
18231-8399
18231-8519
18231-8533
18231-8328
18231-8449
18231-8525
18231-8450
18231-8526
18231-8527
18231-8546
18231-8451
18231-8552
18231-8550
18231-8528
18231-8452
18231-8529
18231-8543
18231-8453
18231-8454
18231-8465
18231-8466
18231-8467

ROD DIA.
70
70
75
75
75
76
80
80
80
80
90
90
90
90
90
100
100
110
110
120
124.5
125
125
130
130
140
140
150
160
180
200
220
250

BORE DIA.
85
90
85
85
90
100
90
90
93.5
100
100
100
105
106
110
115
116
125
130
140
145
140
150
150
154
155
164
165
175
195
215
240
270

BORE DEPTH
7
7
5
3.18
7
10
7
3.18
6
7
7
3.18
7
8
7
9
8
9
8
8
9
9
9
9
8
9
8
9
9
9
9
12
12

All dimensions are in mm. Preferred sizes are indicated with bold type face.
Sizes listed are for standard nitrile elements, except Models 25 and 62 which have PTFE elements. Other material available on inquiry only.
Rev. 1/01

R-3

Model 79 Rod Scrapers

Garlock

Model 79 scrapers and pin seals continue to set new standards of efficiency in excluding
dirt, mud and metal chips in demanding equipment applications.
Durability

CBore Depth

Four times the tensile strength/tear resistance of

nitrile materials
High modulus for optimum scraping action
Exceptional abrasion resistance
Outstanding endurance under difficult operating
conditions

Carbon
steel case

30
CBore
Rod

Flexibility
Exhibits excellent elasticity
Exhibits excellent resilience
Withstands high degree of deformation

Applications
Hydraulic cylinders
Track adjusters
Available as pin seals with a special formulation
of polyurethane for oscillating linkage pin
assemblies

Features

Advantages

Press fit design

Easy retrofit in existing

counterbore

Exclusive urethane
lip configuration

Non-scoring
Accepts greater sideloading/rod eccentricity

Superior bond of
element to steel
case

Provides greater concentricity and rebound characteristics

Extensive line
of tooling

Available in a wide range

of inch and metric sizes

Benefits
Saves time on installation
Eliminates costly damage to equipment from
contaminants
Extended life
Reduced vendor base

R-4

Polyurethane
element

Typical Installation

Recommended Tolerances and

Finishes
Rod
Chamfer
Up to 2"
2" to 6"
6" & up
Hardness
Tolerance
Finish
Speed

30 x 3/32" axially
30 x 5/32" axially
30 x 1/4" axially
30 Rockwell C (minimum)
0.003"
20 rms (maximum)
50 fpm (typical)

Counterbore
Tolerance
Up to 3"
0.001"
3" to 6"
0.0015"
6" to 10"
0.002"
10" to 20" + 0.002", -0.004"
Finish
60 rms (maximum)
Depth tolerance
Up to 6" diameter
+1/64", - 0"
6" & up diameter
+1/32", - 0"
Chamfer
None required

Rev. 1/01

Relationship Between RPM, FPM and Shaft Diameters

10000
9000

10

RELATIONSHIP BETWEEN RPM, FPM AND SHAFT DIAMETER

8000

7000

7 1/2
6 1/2
10000
9000
8000

6000
5500

6
5 1/2

7000

5000

5
6000

4500

4 1/2

5000

4000

4000

4
3 3/4

3500

3 1/2

3000

3 1/4
2500

3000

2000
2500

2 3/4
2.5

2 1/2

1500
2 1/4
2000

1000
900
800

2
1 7/8
1 3/4

700
600

1500

1 5/8
1.5

1 3/8

400

1 1/4
1 1/8

300
1000

250

200

0.9

15/16

900
800

0.8
150

700
100
90
80

550

An approximate method of calculating

peripheral speeds is as follows: Shaft
Diameter (in inches) x RPM x 0.26.

60

0.6

11/16
5/8
9/16

0.5

50

400

40

350

30

1/2
7/16

0.4

3/8
11/32
5/16

25
0.3
20

250

13/16

70

500

300

7/8

3/4
0.7

600

450

1 1/2

500

9/32

15

0.25

10

0.2

1/4
7/32

200

3/16

FPM
5/32

150
To convert RPM to FPM, set straight edge on known factors (shaft diameter
and RPM). The center line will indicate FPM. As illustrated above, a 1 inch
shaft turning 3500 RPMs converts to 900 FPM.
100

RPM

1/8

0.1

SHAFT DIA.

How to Order
9.
10.
11.
12.

Worldwide Garlock KLOZURE Oil Seal and Bearing

Isolator distributors can offer you fast delivery on trouble-free,
high-quality oil and grease seals and bearing protectors.
To help maintain maximum sealing effectiveness, we
need as much information as possible concerning your operating conditions. The following check list will help you give us
the data needed to recommend the proper oil seals for your
standard and special sealing requirements.
Customer name and address
Customers part name and number shown on drawing
Description or application of parts
1. Quantity requirements: Parts per day, per month, per
year; quantity purchased at one time. Will this be a repeat
order?
2. Packaging requirements (bulk, box, bag, pallet, etc.):
Can customer handle pallets? If not, what is largest carton gross weight customer can handle?
3. Material requirements: Must we meet customer specs?
Are they attached? If not, where are they? Element
requirement: material, dual lip; case requirement:
material, thickness, cover washer.
4. Is functional test required? If yes, describe.
5. Suggested design: By whom, model number, element,
case, spring.
6. Fixed dimensions: Shaft, housing bore, recess/width. If
still open, indicate.
7. Motion: Rotating: RPM, FPM (MPS), maximum and minimum; reciprocating: stroke, strokes/min.
8. Shaft: Material; finish: microinches AA (RMS), finish
method; hardness: Brinell, Rockwell C; position: vertical,
horizontal.

Housing: Material, finish, chamfer, shoulder.

Eccentricity: Bore misalignment, dynamic runout/TlR.
Temperature: Normal operating, maximum, minimum.
Medium to be sealed: Inside, pressure, outside, pressure.
Medium level with respect to seal: Inside, outside.
Assembly: With or against lip; tool used; splines, keyways, shoulders or other conditions.
Type of bearing: Location of seal with respect to bearing.
How to specify: When ordering seals, use model number or computer number. Any special combination should
be specified.
Where to order or inquire: Garlock has established a
worldwide network of authorized distributors. Look in the
Yellow Pages for the name and the distributor nearest
you, or contact:

13.
14.
15.
16.

17.

Garlock Sealing Technologies

1666 Division Street
Palmyra, New York 14522
Telephone: 315-597-4811, 1-800-448-6688
For Canadian requirements, address your inquiries and
orders to:
Garlock of Canada, Ltd.
2860 Plymouth Drive
Oakville, Ontario, Canada L6H 5S8
Telephone: 905-829-3200

WARNING:

RE G

SY S

AUTHORIZED DISTRIBUTOR

IS

ER

E D Q U A LI

ISO 9002-94
Cert. #001762

Properties/applications shown throughout this brochure are typical. Your specific

application should not be undertaken without independent study and evaluation for
suitability. For specific application recommendations consult Garlock. Failure to
select the proper sealing products could result in property damage and/or serious
personal injury.
Performance data published in this brochure has been developed from field testing, customer field reports and/or in-house testing.
While the utmost care has been used in compiling this brochure, we assume no
responsibility for errors. Specifications subject to change without notice. This
edition cancels all previous issues. Subject to change without notice.
GARLOCK is a registered trademark for packings, seals, gaskets, and other products of Garlock.
Garlock Inc 2001. All rights reserved worldwide.

Garlock
Sealing Technologies
Garlock Sealing Technologies
1666 Division Street
Palmyra, New York 14522 USA
1-315-597-4811
1-800-448-6688
Fax: 1-800-543-0598
1-315-597-3216
Visit the Garlock network:

www.garlock.net

PRINTED IN U.S.A.

Other Garlock facilities are located in:

Paragould, AR, USA
1-870-239-4051
Columbia, SC, USA
1-803-783-1880
Houston, TX, USA
1-281-459-7200
Sydney, Australia
61-2-9793-2511
So Paulo, Brazil
55-11-884-9680
Oakville, Canada
1-905-829-3200
Berkshire, England
44-1635-38509
Saint-tienne, France 33-4-7743-5100
Neuss, Germany
49-2131-3490
Seoul, Korea
822-554-6341
Mexico City, Mexico
52-5-567-7011
Singapore
65-254-7372
KLZ 2:21

Fax: 1-870-239-4054
Fax: 1-803-783-4279
Fax: 1-281-458-0502
Fax: 61-2-9793-2544
Fax: 55-11-884-9680
Fax: 1-905-829-3333
Fax: 44-1635-569573
Fax: 33-4-7743-5151
Fax: 49-2131-349-222
Fax: 822-554-6343
Fax: 52-5-368-0418
Fax: 65-254-6708
DPI-1/01-5M-F