Académique Documents
Professionnel Documents
Culture Documents
If youre running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk
to log onto your computer when you forget your password. To create the disk:
1.Click Start, click Control Panel, and then click User Accounts.
2.Click your account name.
3.Under Related Tasks, click Prevent a forgotten password.
4.Follow the directions in the Forgotten Password Wizard to create a password reset disk.
5.Store the disk in a secure location, because anyone using it can access your local user account.
With Internet Connection Sharing (ICS) in Windows XP, you can connect one computer to the Internet, then share the
Internet service with several computers on your home or small office network. The Network Setup Wizard in Windows XP
Professional will automatically provide all of the network settings you need to share one Internet connection with all the
computers in your network. Each computer can use programs such as Internet Explorer and Outlook Express as if they were
directly connected to the Internet.
You should not use this feature in an existing network with Windows 2000 Server domain controllers, DNS servers,
gateways, DHCP servers, or systems configured for static IP addresses.
Enabling ICS
The ICS host computer needs two network connections. The local area network connection, automatically created by
installing a network adapter, connects to the computers on your home or small office network. The other connection, using a
56k modem, ISDN, DSL, or cable modem, connects the home or small office network to the Internet. You need to ensure
that ICS is enabled on the connection that has the Internet connection. By doing this, the shared connection can connect
your home or small office network to the Internet, and users outside your network are not at risk of receiving inappropriate
addresses from your network.
When you enable ICS, the local area network connection to the home or small office network is given a new static IP
address and configuration. Consequently, TCP/IP connections established between any home or small office computer and
the ICS host computer at the time of enabling ICS are lost and need to be reestablished. For example, if Internet Explorer is
connecting to a Web site when Internet Connection Sharing is enabled, refresh the browser to reestablish the connection.
You must configure client machines on your home or small office network so TCP/IP on the local area connection obtains an
IP address automatically. Home or small office network users must also configure Internet options for Internet Connection
Sharing. To enable Internet Connection Sharing (ICS) Discovery and Control on Windows 98, Windows 98 Second Edition,
and Windows Millennium Edition computers, run the Network Setup Wizard from the CD or floppy disk on these computers.
For ICS Discovery and Control to work on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition
computers, Internet Explorer version 5.0 or later must be installed.
To configure Internet options on your client computers for Internet Connection Sharing
Open Internet Explorer. Click Start, point to All Programs, and then click Internet Explorer.)
On the Tools menu, click Internet Options.
On the Connections tab, click Never dial a connection, and then click LAN Settings.
In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.
In Proxy Server, clear the Use a proxy server check box.
Click on the "Recycle Bin" string in the right hand pane. Hit Del, click OK.
FAT16
The FAT16 file system was introduced way back with MSDOS in 1981, and it's showing its age. It was designed originally to
handle files on a floppy drive, and has had minor modifications over the years so it can handle hard disks, and even file
names longer than the original limitation of 8.3 characters, but it's still the lowest common denominator. The biggest
advantage of FAT16 is that it is compatible across a wide variety of operating systems, including Windows 95/98/Me, OS/2,
Linux, and some versions of UNIX. The biggest problem of FAT16 is that it has a fixed maximum number of clusters per
partition, so as hard disks get bigger and bigger, the size of each cluster has to get larger. In a 2GB partition, each cluster
is 32 kilobytes, meaning that even the smallest file on the partition will take up 32 KB of space. FAT16 also doesn't support
compression, encryption, or advanced security using access control lists.
FAT32
The FAT32 file system, originally introduced in Windows 95 Service Pack 2, is really just an extension of the original FAT16
file system that provides for a much larger number of clusters per partition. As such, it greatly improves the overall disk
utilization when compared to a FAT16 file system. However, FAT32 shares all of the other limitations of FAT16, and adds an
important additional limitationmany operating systems that can recognize FAT16 will not work with FAT32most notably
Windows NT, but also Linux and UNIX as well. Now this isn't a problem if you're running FAT32 on a Windows XP computer
and sharing your drive out to other computers on your networkthey don't need to know (and generally don't really care)
what your underlying file system is.
The Advantages of NTFS
The NTFS file system, introduced with first version of Windows NT, is a completely different file system from FAT. It provides
for greatly increased security, filebyfile compression, quotas, and even encryption. It is the default file system for new
installations of Windows XP, and if you're doing an upgrade from a previous version of Windows, you'll be asked if you want
to convert your existing file systems to NTFS. Don't worry. If you've already upgraded to Windows XP and didn't do the
conversion then, it's not a problem. You can convert FAT16 or FAT32 volumes to NTFS at any point. Just remember that you
can't easily go back to FAT or FAT32 (without reformatting the drive or partition), not that I think you'll want to.
The NTFS file system is generally not compatible with other operating systems installed on the same computer, nor is it
available when you've booted a computer from a floppy disk. For this reason, many system administrators, myself included,
used to recommend that users format at least a small partition at the beginning of their main hard disk as FAT. This partition
provided a place to store emergency recovery tools or special drivers needed for reinstallation, and was a mechanism for
digging yourself out of the hole you'd just dug into. But with the enhanced recovery abilities built into Windows XP (more on
that in a future column), I don't think it's necessary or desirable to create that initial FAT partition.
When to Use FAT or FAT32
If you're running more than one operating system on a single computer (see Dual booting in Guides), you will definitely
need to format some of your volumes as FAT. Any programs or data that need to be accessed by more than one operating
system on that computer should be stored on a FAT16 or possibly FAT32 volume. But keep in mind that you have no security
for data on a FAT16 or FAT32 volumeany one with access to the computer can read, change, or even delete any file that is
stored on a FAT16 or FAT32 partition. In many cases, this is even possible over a network. So do not store sensitive files on
drives or partitions formatted with FAT file systems.
Note
To open My Computer, click Start, and then click My Computer.
This option is only available for folders included in your user profile. Folders in your user profile include My Documents and
its subfolders, Desktop, Start Menu, Cookies, and Favorites. If you do not make these folders private, they are available to
- Once chosen simply click on what you want to download and then back at the top click Review Download Basket
- You are taken to the next page where at the top you can specify where the downloads are to be saved.
- Click Download now. Each patch will make a directory under the root of the folder you saved them to.
Once finished you need to go to where you saved the file (s) to and then simply install all your patches.
Go to start/run,
and type control userpasswords2
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to
perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also
recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency
repair disk (ERD).
Open My Computer.
Click the files or folders you want to copy to the CD. To select more than one file, hold down the CTRL key while you click
the files you want. Then, under File and Folder Tasks, click Copy this file, Copy this folder, or Copy the selected items.
If the files are located in My Pictures, under Picture Tasks, click Copy to CD or Copy all items to CD, and then skip to step
5.
In the Copy Items dialog box, click the CD recording drive, and then click Copy.
In My Computer, doubleclick the CD recording drive. Windows displays a temporary area where the files are held before
they are copied to the CD. Verify that the files and folders that you intend to copy to the CD appear under Files Ready to be
Written to the CD.
Under CD Writing Tasks, click Write these files to CD. Windows displays the CD Writing Wizard. Follow the instructions in
the wizard.
Notes:
Do not copy more files to the CD than it will hold. Standard CDs hold up to 650 megabytes (MB). Highcapacity CDs hold
up to 850 MB.
Be sure that you have enough disk space on your hard disk to store the temporary files that are created during the CD
writing process. For a standard CD, Windows reserves up to 700 MB of the available free space. For a highcapacity CD,
Windows reserves up to 1 gigabyte (GB) of the available free space.
After you copy files or folders to the CD, it is useful to view the CD to confirm that the files are copied. For more
information, click Related Topics.
To stop the CD recorder from automatically ejecting the CD
Open My Computer.
Disable CD Autorun
1) Click Start, Run and enter GPEDIT.MSC
2) Go to Computer Configuration, Administrative Templates, System.
3) Locate the entry for Turn autoplay off and modify it as you desire.
2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run...
and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer
and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many
interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition
only).
3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right
mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like.
That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do
the same.
4. XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it
disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove
it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and
there will be your prey, exposed and vulnerable.
5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate'
and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems,
and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -they're all far too baroque to go into here.
6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only
experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then
'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.
7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or
just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in
your system.
8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave
zip files well alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can put things
back as they were by typing 'regsvr32 zipfldr.dll'.
9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well
worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an
astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from
the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType
on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control
Panel/Desktop/FontSmoothingType to 2.
10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but
not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute
will be a NAT IP address, like 192.168.1.10. Replace this with your chum's real IP address -- they can find this out by going
to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to
the errant computer.
11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As...
and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you
need to have administrative permissions to install a program, which many require. Note that you can have some fun by
running programs multiple times on the same system as different users, but this can have unforeseen effects.
12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows
Messenger and so on. After a while, the nagging goes away, but if you feel you might slip the bonds of sanity before that
point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create
a DWORD value called EnableBalloonTips with a value of 0.
13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control
userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User
Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user
name and password for the account you want to use.
14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools /
Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder
when browser is closed.
15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right
click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up
connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny
network icon on the right of your task bar that glimmers nicely during network traffic.
16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry
entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier.
Like 0.
17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one
and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them.
Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups.
18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet
when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy
of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and
display it.
19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows
key + Tab moves through the taskbar buttons.
20. The next release of Windows XP, codenamed Longhorn, is due out late next year or early 2003 and won't be much to
write home about. The next big release is codenamed Blackcomb and will be out in 2003/2004.
Boot Defragment
A very important new feature in Microsoft Windows XP is the ability to do a boot defragment. This basically means that all
boot files are placed next to each other on the disk drive to allow for faster booting. By default this option is enabled but
some upgrade users have reported that it isn't on their setup.
1.
2.
3.
4.
5.
6.
Start Regedit.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction
Select Enable from the list on the right.
Right on it and select Modify.
Change the value to Y to enable and N to disable.
Reboot your computer.
Upload Manager
Windows Time
Wireless Zero Configuration (for wireless networks)
Workstation
Slow Shutdown
Some people have noticed that they are experiencing a really slow shutdown after installing Windows XP Home or
Professional. Although this can be caused a number of ways, the most clear cut one so far is happening on systems with an
NVidia card installed with the latest set of drivers. A service called NVIDIA Driver Helper Service is loading up on start up
and for whatever reason doesn't shut itself down properly. The service isn't needed and can also increase the amount of
memory available to your system. Here is how to disable it.
1: Go into your Control Panel
2: Select Administrative Tools and then click on Services
3: Right click on the file "NVIDIA Driver Helper Service" and then select STOP.
4: To stop this loading up every time you boot up your PC Right click it again and select properties - then where the option
"Startup Type" is shown - make sure it is set at Manual like we have shown in the image below.
Open the System folder in Control Panel. Click Start, point to Settings, click Control Panel, and then double-click
the System icon.
On the Remote tab, select the Allow users to connect remotely to this computer check box, as shown below.
Ensure that you have the proper permissions to connect to your computer remotely, and click OK.
Leave your computer running and connected to the company network with Internet access. Lock your computer,
and leave your office.
The Remote Desktop Connection client software allows a computer running Windows 95, Windows 98, Windows 98
Second Edition, Windows Me, Windows NT 4.0 or Windows 2000 to control your Windows XP Professional computer
remotely. The client software is available on the installation CD for Windows XP Professional and Windows XP Home
Edition. The client software is installed by default on computers running Windows XP Professional and Windows XP
Home Edition.
When the installation wizard starts, follow the directions that appear on your screen.
When the Welcome page appears, click Perform additional tasks, and then click Setup Remote Desktop Connection
as shown below.
Once you have enabled your Windows XP Professional computer to allow remote connections, and installed client
software on a Windows-based client computer, you are ready to start a Remote Desktop session.
Open Remote Desktop Connection. (Click Start, point to Programs or All Programs, point to Accessories, point to
Communications, and then click Remote Desktop Connection.)
In Computer, type the computer name for your computer running Windows XP Professional that has Remote
Desktop enabled and for which you have Remote Desktop permissions
Click Connect.
In the Log On to Windows dialog box, type your user name, password, and domain (if required), and then click OK.
The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on your
office computer. Your office computer will remain locked.
Nobody will be able to work at your office computer without a password, nor will anyone see the work you are
doing on your office computer remotely. Note: To change your connection settings, (such as screen size, automatic
logon information, and performance options), click Options before you connect.
Click the .Rdp file for the connection you want to open. Note: A Remote Desktop file (.rdp) file contains all of the
information for a connection to a remote computer, including the Options settings that were configured when the
file was saved. You can customize any number of .rdp files, including files for connecting to the same computer
with different settings. For example, you can save a file that connects to MyComputer in full screen mode and
another file that connects to the same computer in 800600 screen size. By default, .rdp files are saved in the My
DocumentsRemote Desktops folder. To edit an .rdp file and change the connections settings it contains, right-click
the file and then click Edit.
In the Remote Desktop Connection window, click Start, and then click Shut Down.
The Shut Down Windows dialog box appears.
In the drop-down menu, select Log Off , and then click OK.
All of the files in the series will be named in sequence using the new name you type. For example, if you type Birthday, the
first will be named Birthday and subsequent files in the series will be named Birthday (1), Birthday (2), and so on. To specify
the starting number for the series, type the starting number in parentheses after the new file name. The files in the series
will be numbered in sequence starting with the number you type. For example, if you type Birthday (10), the other files will
be named Birthday (11), Birthday (12), and so on.
Licensing Issues
Here you can find a Description of the things which are done by the Program or you can manually change the following
settings to have the same effect:
- MediaPlayer: Don't Acquire licenses automatically - Open the MediaPlayer-Extras - Options... Click the tab
'Player', look at the groupbox 'Internetsettings' and uncheck 'Acquire licenses automatically'.
- MediaPlayer: No identification by internetsites - Open the MediaPlayer-Extras-Options... Click the tab Player,
look at the groupbox 'Internet settings' and uncheck 'Allow identification by internet sites'
- MediaPlayer: don't download codecs automatically - Open the MediaPlayer-Extras-Options... Click the tab 'Player',
look at the groupbox 'Automatic Updates' and uncheck 'Download Codecs Automatically'
- Error report: Don't report errors - Open the Explorer, right-click on 'My Computer' and select 'Properties', click on
the Tab 'Advanced' and click the button 'Errorreports', in the upcoming dialog uncheck all 3 items and select
'Disable Errorreports'
1.
Click - Start - Control Panel - Performance and Maintenance - Power Options Tab
2.
On Screen Keyboard
Want to use an on screen keyboard? Well it is this simple - Click on the start button and select run. Then type in osk in the
box and click OK.
1.
2.
3.
A new hibernation button appears: click it while still holding the shift key: voila your PC will hibernate.
Point the standby button and maintain the shift key pushed,
Install the current Windows DDK. Read the system requirements and installation instructions in the stand-alone
Getting Started HTML file supplied with the DDK.
Read Getting Started with Windows Drivers. This document guides you through the planning and decision-making
process involved in making a Windows device driver from design through distribution. You should also look
through the DDK documentation for device-type-specific information.
Battery Devices
Modem Devices
Multifunction Devices
Storage Devices
IDE bus are described in System Support for Buses. Driver development for most device types also requires a
strong understanding of Windows operating system fundamentals, which are described in Kernel-Mode Driver
Architecture.
Look through the driver source code provided with the DDK for a sample that represents your device type. Use the
sample code where possible, modifying it for your device's specifics.
The sample code can enhance your understanding of Windows XP driver implementation requirements and speed
your development time.
Compile and build your driver. This should be done using the Build utility and not some other compiler, because the
Build utility has certain features that are necessary for driver development.
Obtain a checked build of Windows XP, so that you can test and debug your driver using free and checked system
builds.
The checked build of Windows XP provides extensive kernel-mode debugging capabilities not available in the free
build.
Create an INF file so that you can install and test your driver.
Test and debug your driver. You should use Driver Verifier, a program that puts your driver through a variety of
tests, stresses, and deliberate failures in order to test its response and reliability in many extreme situations. You
should also use a debugger. Microsoft provides several powerful debuggers that can monitor and debug kernelmode and user-mode drivers.
Using Driver Verifier in conjunction with these debuggers, on both the checked and free versions of the operating
system, can be a powerful way to test your driver.
Provide an installation package so that customers can install devices that use your driver.
Submit your driver and installation package to Microsoft so that it can be digitally signed.
There are many resources available to you while developing your driver. The following sites describe some of the support
available to you:
http://www.microsoft.com/ddk describes how to obtain the current DDK and provides other information, such as a
driver development reading list.
http://www.microsoft.com/hwdev provides information, such as device-type-specific white papers and latebreaking news, and a list of resources available to driver developers.
Note: This requires up to 5 floppy disks and DOES NOT contain ANY CD-ROM drivers to boot from. A proper CD-ROM boot up
disk is going to be release by Microsoft after the Windows XP public release. You can however use you old Windows Me startup disk if you would prefer, as long as you have not upgraded to an NTFS drive.
You can also download the complete set of bootdisks from our website, ready to create the six MS boot disks for Windows
XP:
http://www.freepctech.com/pc/002/files010.shtml
Change the text in Internet Explorers title bar to anything you want
In regedit navigate to this key:
HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerMain
change the value of the string "Window Title" to whatever you want on the title bar of Internet Explorer - to have no title
except the title of the web pages you are browsing do not enter anything for a value.
Internet Broadband
this ones simple:
this is for broad band connections. I didnt try it on dial up but might work for dial up.
1.make sure your logged on as actually "Administrator". do not log on with any account that just has administrator
privileges.
2. start - run - type gpedit.msc
3. expand the "local computer policy" branch
4. expand the "administrative templates" branch
5. expand the "network branch"
6. Highlight the "QoS Packet Scheduler" in left window
7. in right window double click the "limit reservable bandwidth" setting
8. on setting tab check the "enabled" item
9. where it says "Bandwidth limit %" change it to read 0
reboot if you want to but not necessary on some systems your all done. Effect is immediate on some systems. some need
re-boot. I have one machine that needs to reboot first, the others didn't. Don't know why this is.
This is more of a "counter what XP does" thing. In other words, XP seems to want to reserve 20% of the bandwidth for its
self. Even with QoS disabled, even when this item is disabled. So why not use it to your advantage. To demonstrate the
problem with this on stand alone machines start up a big download from a server with an FTP client. Try to find a server that
doesn't max out your bandwidth. In this case you want a slow to medium speed server to demonstrate this. Let it run for a
couple of minutes to get stable. The start up another download from the same server with another instance of your FTP
client. You will notice that the available bandwidth is now being fought over and one of the clients download will be very slow
or both will slow down when they should both be using the available bandwidth. Using this "tweak" both clients will have a
fair share of the bandwidth and will not fight over the bandwidth.
Album cover art makes music folder thumbnails look better than ever!
Change the location of the My Music or My Pictures folders
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that
folder in the shell. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special shell
folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations.
However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open
the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows
XP will update all of the references to that folder to the new location, including the Start menu.
Add/Remove optional features of Windows XP
I first mentioned this technique in an old Technology Showcase for Windows 2000, but it still works in Windows XP, and can
be quite useful: For some reason, Microsoft has removed the ability to specify which Windows components you want to
install during interactive Setup, and when you go into Add/Remove Windows Components in the Control Panel, you still don't
have the full list of applications and applets you can add and remove. Thankfully, this is easy to fix.
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to
C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under
Windows XP Professional Edition RC1, this file will resemble the following by default:
[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this,
do a global search and replace for , hide and change each instance of this to , (a comma). Then, save the file, relaunch
Add/Remove Windows Components, and tweak the installed applications to your heart's content.
Cool, eh? There are even more new options now under "Accessories and Utilities" too.
Remove Windows Messenger
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend
against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this
feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you
can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot
into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to
C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open sysoc.inf (see the previous tip
for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows
Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
Keyboard Shortcuts
When speed counts, the keyboard is still king. Almost all the actions and commands you can perform with a mouse you can
perform faster using combinations of keys on your keyboard. These simple keyboard shortcuts can get you where you want
to go faster than several clicks of a mouse. You'll work faster on spreadsheets and similar documents, too, because you
won't lose your place switching back and forth between mouse and keys.
Here are some of the most useful keyboard shortcuts:
Copy. CTRL+C
Cut. CTRL+X
Paste. CTRL+V
Undo. CTRL+Z
Delete. DELETE
Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE
Copy selected item. CTRL while dragging an item
Create shortcut to selected item. CTRL+SHIFT while dragging an item
Rename selected item. F2
Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW
Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW
Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW
Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW
Highlight a block of text. CTRL+SHIFT with any of the arrow keys
Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow
keys
Select all. CTRL+A
Search for a file or folder. F3
View properties for the selected item. ALT+ENTER
Close the active item, or quit the active program. ALT+F4
Opens the shortcut menu for the active window. ALT+SPACEBAR
Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4
Switch between open items. ALT+TAB
Cycle through items in the order they were opened. ALT+ESC
Cycle through screen elements in a window or on the desktop. F6
Display the Address bar list in My Computer or Windows Explorer. F4
Display the shortcut menu for the selected item. SHIFT+F10
Display the System menu for the active window. ALT+SPACEBAR
Display the Start menu. CTRL+ESC
Display the corresponding menu. ALT+Underlined letter in a menu name
Carry out the corresponding command. Underlined letter in a command name on an open menu
Activate the menu bar in the active program. F10
Open the next menu to the right, or open a submenu. RIGHT ARROW
Open the next menu to the left, or close a submenu. LEFT ARROW
Refresh the active window. F5
View the folder one level up in My Computer or Windows Explorer. BACKSPACE
Cancel the current task. ESC
SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW
Scandisk is not a part of Windows XP - instead you get the improved CHKDSK. You can use the Error-checking tool to check
for file system errors and bad sectors on your hard disk.
1: Open My Computer, and then select the local disk you want to check.
2: On the File menu, click Properties.
3: On the Tools tab, under Error-checking, click Check Now.
4: Under Check disk options, select the Scan for and attempt recovery of bad sectors check box.
All files must be closed for this process to run. If the volume is currently in use, a message box will appear prompting you
to indicate whether or not you want to reschedule the disk checking for the next time you restart your system. Then, the
next time you restart your system, disk checking will run. Your volume will not be available to perform other tasks while this
process is running.
If your volume is formatted as NTFS, Windows automatically logs all file transactions, replaces bad clusters, and stores
copies of key information for all files on the NTFS volume.
XP file Sharing
File sharing. Is the sharing of a disk or printer between computers . If a disk or folder is shared, everyone on the
network can access it. You have the ability to set password and permissions for the shared disk or folder for security
therefore Windows XP tries to protect you from some potential security risks.
Right click the disk or folder that you want to share and select Sharing and Security.
NOTE: The first time you do this the Networking wizard will appear ..CLOSE IT..:-
The Wizard automatically enables the Internet Connection Firewall (ICF) to prevent other Internet users from accessing
your shared disks and folders. Enabling ICF is a good idea if you connect directly to the Internet through a dial-up, DSL,
or cable modem. But it's a terrible idea if you connect to the Internet through your LAN, using a software router (like
Internet Connection Sharing) or a hardware router, since it will block File and Printer Sharing.
The disk or folder that you share, along with all of the folders that it contains, will be accessible by other network users. If
you're sharing an entire disk, Windows XP gives a warning. The implication of the warning is that it's better to share a
specific folder, since only that folder (and its subfolders) will be accessible by others, and the rest of the disk will be
inaccessible. Click where indicated if you want to go ahead and share the entire disk. This screen doesn't appear if you're
sharing a folder.
XP will display a warning. If you want ICF enabled, select Use the wizard to enable file sharing. Otherwise, select Just
enable file sharing.
Having successfully stopped the Wizard's , you now have to specify a Share name, which users on other networked
computers will use to access this disk or folder. For maximum compatibility with all versions of Windows, use 1-12
characters.
By default, users on other computers have full access: they can read, write, and delete shared files. If you only want
them to be able to read files, un-check Allow network users to change my files.
Warning: If a user has full access, deleting a file doesn't put it in the Recycle Bin. Once it's deleted, it's gone for good.
Specify a share name that ends with a dollar sign. Once again, use 1-12 characters (1-11 before the dollar sign). If the
people on your network are clever enough to guess a name like myfiles$, use a more secure name, like a combination of
letters and numbers. Just make sure that you can remember it.
Specify an unused drive letter and enter the network path for the hidden share, being sure to include the dollar sign. If
you check Reconnect at logon, the mapping will happen automatically every time you start your computer. Otherwise,
you'll have to map it manually every time.
On the Connections tab, click Never dial a connection, and then click LAN Settings.
In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.
In Proxy Server, clear the Use a proxy server check box.
XP Network Protocols
Im not going to explain everything about Protocols that is way out of scope of this guide.
There are three main Protocols : TCP/IP, IPX/SPX and NETBEUI
TCP/IP :
Is automatically installed, can't be un-installed, and is used by default for all networking functions.Windows XP provides
one other supported protocol -- IPX/SPX -- and one unsupported protocol, NetBEUI.
By default, XP configures TCP/IP to obtain an IP address automatically. If there's a DHCP server on the network, it will
assign the IP address and other TCP/IP settings to the connection. Otherwise, Windows XP will use Automatic Private IP
Addressing to assign an IP address to the connection.
By default, XP configures TCP/IP to obtain an IP address automatically. If there's a DHCP server on the network, it will
assign the IP address and other TCP/IP settings to the connection. Otherwise, Windows XP will use Automatic Private IP
Addressing to assign an IP address to the connection.
This default configuration should work, unchanged, to connect a Windows XP computer to a network that uses TCP/IP for
File and Printer Sharing in these common configurations:
Using an Internet sharing program or a hardware router protects the local area network from access by other Internet
users, so it's safe to use TCP/IP for File and Printer Sharing on the LAN. The computers have private IP addresses that
IPX/SPX
If the existing network uses IPX/SPX for File and Printer Sharing, you can add that protocol to the Windows XP computer.
IPX/SPX is fully supported in XP. In the connection's Properties, click the Install button to add a network component. XP
will ask what type of network component to install.
Click NWLink IPX/SPX/NetBIOS Compatible Transport Protocol and click OK. Two NWLink items are added to the
connection's Properties
Have your winXP CD handy.
NetBEUI
NetBEUI was the default protocol in Windows 95, but Microsoft has been moving away from NetBEUI ever since. Starting
with Windows 98, TCP/IP has been the default protocol, and NetBEUI has been available for installation as a supported
protocol.
Starting with Windows XP, NetBEUI is unsupported. This doesn't mean that NetBEUI won't work! It means that:
Microsoft's technical support staff won't answer questions about NetBEUI or help solve problems with it.
Because it's been around for so long, some people think that NetBEUI is required, and they install it on all Windows
networks. Actually, nothing in Windows networking has ever required NetBEUI. You can even un-install NetBEUI in
Windows 95 and use a different protocol.
If your existing network uses NetBEUI for File and Printer Sharing, consider changing to a different protocol. Most
networks can safely use TCP/IP. The main exceptions to this rule are when:
All of the networked computers are connected directly to a cable or DSL modem and receive public IP addresses from
an Internet service provider.
You've separated your LAN from the Internet, but you've opened ports or have placed a computer outside the firewall
to use certain applications or services.
If, after considering all the options, you decide to install NetBEUI on Windows XP, you can do it using files on the
Windows XP CD-ROM. Follow the instructions in the article HOW TO: Install NetBEUI on Windows XP in the Microsoft
Knowledge Base. These tips will help with the installation process:
If the Welcome to Microsoft Windows XP screen appears when you insert the CD-ROM, click Perform additional tasks
Where the article refers to %SYSTEMROOT%, substitute the name of the Windows XP installation folder, which is
typically C:Windows.
To see the hidden INF directory, go to My Computer | Tools | Folder Options | View. Scroll down the list of Advanced
settings, and un-check Hide protected operating system files.
If you have a new computer that didn't come with a Windows XP CD-ROM, see if the computer manufacturer will send you
the CD-ROM or the necessary NetBEUI files. If that isn't possible, you'll have to use a different protocol on your network.
XP Hibernate Option
Whenever you want to logoff, shut down or reboot your Windows XP machine you have only 3 choices
(1) Standby ONLY IF the ACPI/APM function is properly enabled BOTH in your motherboard's BIOS AND in WinXP!
(2) Restart
(3) Shutdown.
NOTE: If the Hibernate tab is unavailable your computer does NOT support it!
For some reason Microsoft did NOT enable the 4th option:
(4) Hibernate, which should be available on power saving (ACPI) enabled PCs and laptops.
But you CAN bring it back: just hold the Shift key while the Shut down menu is displayed on your screen, and notice the
Standby button being replaced by a new, fully functional Hibernate button, which can be clicked with the left button of your
mouse.
If you release the Shift key, the Hibernate option will disappear once again, to be replaced by Standby.
Then, select the Event viewer and double-click highlighted events in the Applications or System areas to view detailed
explanations of what went wrong.
XP Animations
You can turn off window animation ("exploding" windows), displayed when you play around with minimizing/maximizing
open windows. This makes navigating Windows 95/98/ME/NT4/2000/XP a lot quicker, especially if you don't have a fast
video controller, or if you got tired of seeing it all the time (like I did). :)
To do this, run Regedit (or Regedt32) and go to:
HKEY_CURRENT_USER | Control Panel | Desktop | WindowMetrics
or if you are the only user of your Windows computer go to:
HKEY_USERS | .Default | Control Panel | Desktop | WindowMetrics
Right-click on an empty spot in the right hand pane. Select New -> String [REG_SZ] Value. Name it MinAnimate. Click OK.
Double-click on "MinAnimate" and type 0 to turn OFF window animation or 1 to turn it ON. Click OK. Close the Registry
Editor and restart Windows. Done.
TweakUI, the famous Microsoft Power Toy [110 KB, free, unsupported] can also turn off animated windows.
Just remove the check mark from the "Window Animation" box under the General tab.
Shell Player
What it is: This PowerToy plays MP3 files and WMA files from the taskbar.
How to use: Right click on the taskbar, click toolbars, then click "Audio Player." If the taskbar is locked and you want to
resize the player, you will have to unlock it. This will allow you to access the play list editor and view all the buttons.
Task Switcher
What it is: Replaces the existing Alt + Tab application switching mechanism of Windows XP. It provides a thumbnail preview
of windows in the task list and is compliant with the new Windows XP visual style.
How to use: (NOTE: You must log off and then log on again for the changes to take effect). Use just as you do the existing
Alt + Tab mechanism by pressing the Alt key and the Tab key to activate. While holding down the Alt key, press the Tab key
to cycle through running applications. To move backwards, press Shift + Alt + Tab. Release all keys when the desired
application is highlighted.
select Last Known Good Configuration. If you catch the problem when it first occurs (meaning you likely have installed only
one or two drivers or new service), this will return you to a previous working condition. (Would System Restore accomplish
the same thing? I dont know, and dont have a broken system to test it on.)
Microsoft reported similarly that these STOP code error message occur when Windows XP is trying to shut down devices. He
says that he has seen this twice: once with Logitech Quickcam installed (with an unsupported driver), and once with a USB
DSL modem that would hang if it wasnt disconnected before shutdown.
SHUTDOWN WORKS, BUT ITS REAL SLOW.
If it appears that Win XP is not shutting down, give it some time. Some users have reported a minute or longer for
shutdown to visibly start. Thus far, it appears that this is a consequence of software that is running when shutdown is
attempted, and it also may have something to do with particular hardware. If you are experiencing this problem, be sure to
close all running programs before attempting shutdown and see if this solves your problem. If so, then you can determine,
by trial and error, which program(s) are involved.
One specific solution for this was provided by Microsoft support. In Control Panel | Administrative Tools | Services. (You
can also get this by launching SERVICES.MSC from a Run box. This utility is also built into the Computer Management
console.) Stop the Nvidia Driver Helper service. Many other friends quickly confirmed that this solved this extremely slow
shutdown problem for them.
POWERDOWN ISSUES.
Powerdown issues are quite distinctive from shutdown issues. I define a shutdown problem as one wherein Windows
doesnt make it at least to the OK to shut off your computer screen. If Windows gets that far, or farther, then it has shut
down correctly. However, the computer may not powerdown correctly after that. This is a different problem, and I encourage
that people reporting these issues to make a very clear distinction in their labeling.
When Windows XP wont powerdown automatically, the APM/NT Legacy Power Node may not be enabled. To enable this,
right-click on the My Computer icon, click Properties | Hardware | Device Manager | View. Check the box labeled Show
Hidden Devices. If its available on your computer, there will be a red X on the APM/NT Legacy Node. Try enabling it and see
if this resolves the powerdown problem.
This should resolve the powerdown issue in most cases. However, other factors can sometimes interfere with correct
powerdown functioning. In that case, consider the following tips:
If you are changing the default power settings in the BIOS, it can lead to a powerdown problem. Restoring all BIOS power
settings to default will likely fix it.
OTHER KNOWN ISSUES & HINTS.
BIOS UPGRADE.
As with every new operating system that comes along - especially one that is as much of a step up as Windows XP is from
Windows 9x - the recommendation is made to be sure your BIOS is updated. Many people have reported that this has
solved their shutdown problems (and had other advantages) with Win XP, just as it has in earlier versions of Windows.
Speed up your Windows 2000/XP system and save resources at the same time
You can improve performance of your Windows 2000/XP and reclaim memory by simply disabling the services that is also
known as "System Services" you don't need which Windows 2000 or XP automatically provide by default.
What Are System Services in the 1st place
System services are actually small helper programs that provide support for other larger programs in Windows 2000. Many
of the services are set up to run automatically each time you start Windows 2000. However, if you're not using the larger
programs that these services are designed to support, these services are simply wasting RAM that could be put to better use
by your applications. While the word "Disable" is used here to describe the idea that you'll remove these services from
memory, what you'll really be doing is changing the startup setting from Automatic to Manual. When you do, the services
won't automatically start each time you launch Windows 2000 Professional. However, Windows 2000 will be able to manually
start the services if they're needed. That way you won't be unnecessarily wasting RAM, but you won't be crippling your
system either. Note: If you're running Windows 2000 Professional on a corporate network, you may not be able to adjust
system services. Regardless of whether you can or not, you should check with your system administrator before attempting
the make these changes.
Changing the startup type of a service from Automatic to Manual is a relatively simple operation. To begin, open the Control
Panel, open the Administrative Tools folder, and then double click the Services tool. When you see the Services window, set
the View to Detail if it isn't already. Then click the Startup Type column header to sort the services by Startup Type. When
you do, all the Services that start automatically will appear at the top of the list.
As you scan through the list of services on your system whose Startup Type setting is set to Automatic, look for the services
in listed in the Table below. These are some of the services are good candidates to be set to a Manual Startup Type.
Examples of services that can be safely changed to Manual :DHCP Client -- You're not connecting to a specific DHCP server on your local network
Distributed Link Tracking Client -- You're not connected to a Windows 2000 domain
DNS Client -- You're not connecting to a specific DNS server on your local network
FTP Publishing Service -- You don't need your system to act as an FTP server
IIS Admin Service -- You don't need your system to act as an WWW server
IPSEC Policy Agent -- You're not connected to a Windows 2000 domain
Messenger -- You're not connected to a Windows 2000 domain
Remote Registry Service -- You don't remotely access the Registry of other systems on your local network
RIP Service -- You don't need your system to act as a router
Run As Service -- You don't use any applications that run as an alias
World Wide Web Publishing Service
You don't need your system to act as an WWW server
If you find a match and think that your system doesn't need that particular service, right-click on the service and choose the
Properties command from the shortcut menu. When you see the Properties dialog box for that service, click the Startup Type
drop down list and select Manual. Then click OK. As you change the Startup Type for any service, take note of the service's
name. That way you'll have a record of which services you changed and can change them back if you need to, as I'll explain
in a moment.
Using the Windows Task Manager
Trick : To determine the amount of RAM you'll regain by disabling unnecessary system services, use the Windows Task
Manager. Here's how: Before you disable any system services, reboot your system and don't launch any applications. If you
have applications that automatically load when you start Windows, hold down the [Shift] key to bypass the Startup folder.
Then, right click on the task bar and select Task Manager from the shortcut menu. When you see the Windows Task Manager
dialog box, select the Performance tab. Now take note of the Available value in the Physical Memory panel. After you disable
those system services you deem unnecessary, reboot your system in the same manner and compare the Available value in
the Physical Memory panel to the one that you noted earlier.
Final thoughts
Keep in mind that you may not find all the services listed in the Table set to Automatic on your system. In fact, you might
not even see some of the services listed present on your system. If that's the case, don't worry about it. Each Windows
2000/XP installation is unique depending on the system and installed software, and different sets of services may be
installed and set to start automatically.
On the other hand, you may find services other than those listed in Table set to Automatic that you may think are
unnecessary. If so, you can find out what each service does by hovering your mouse pointer over the service's description.
When you do, a tool tip window will pop up and display the entire description of the service. You can then better determine if
the service is unnecessary. Remember, by changing the Startup Type to Manual, Windows 2000 can still start the service if
it's needed. If you decide to experiment with changing the Startup Types of certain services, you can monitor the services
over time by launching the Services utility and checking the list of running services. If you consistently find one of the
services you set to Manual running, you may decide to change the Startup Type back to Automatic.
Notes:
To open Windows Update, click Start, then click Help and Support. Under Pick a task, click Keep your
computer uptodate with Windows Update.
The first time you go to the Windows Update Web site, click Yes when prompted to install any required software or
controls.
You might need to be logged on as an administrator or a member of the Administrators group in order to perform
some tasks.
If you dialin to an ISP, your ISP then makes another call to the private networks remote access server to
establish the PPTP or L2TP tunnel. After authentication, you can access the private network.
If you are already connected to the Internet, on a local area network, a cable modem, or a digital subscriber line
(DSL), you can make a tunnel through the Internet and connects directly to the remote access server. After
authentication, you can access the corporate network.
To make a virtual private network (VPN) connection
1.
Open Network Connections. (Click Start, click Control Panel, click Network and Internet Connections, and
then click Network Connections.)
2.
3.
4.
Under Network Tasks, click Create a new connection, and then click Next.
Click Connect to the network at my workplace, and then click Next as shown below.
Click Virtual Private Network connection, click Next, and then follow the instructions in the wizard.
Notes:
You can create multiple VPN connections by copying them in the Network Connections folder. You can then rename
the connections and modify connection settings. By doing so, you can easily create different connections to
accommodate multiple hosts, security options, and so on.
If you have an active Winsock Proxy client, you cannot create a VPN. A Winsock Proxy client immediately redirects
data to a configured proxy server before the data can be processed in the fashion required by a VPN. To establish a
VPN, you should disable the Winsock Proxy client.
Ping
In a previous tip, it was revealed how to continuously ping a host until stopped. Here are all of the ping options:
example .. In DOS .. c:>ping 192.168.0.1 -t
-t Ping the specifed host until interrupted
-a Resolve addresses to hostnames
-n count Number of echo requests to send
-l size Send buffer size
-f Set Don't Fragment flag in packet
-i TTL Time To Live
-v TOS Type Of Service
-r count Record route for count hops
-s count Timestamp for count hops
-j host-list Loose source route along host-list
To cancel restore point creation and return to the Welcome to System Restore screen, click Back.
To cancel restore point creation and exit the System Restore Wizard, click Cancel.
To view or to return to this restore point, from the Welcome to System Restore screen of the System Restore Wizard
select Restore my computer to an earlier time. Then select the date when the restore point was created from the
calendar in the Select a Restore Point screen. All of the restore points that were created on the selected date are listed by
name in the list box to the right of the calendar.
To set advanced restore options
1. Open Backup. (Click Start, point to All Programs, point to Accessories, point to System Tools, and then click
Backup.) The Backup Utility Wizard starts by default, unless it is disabled.
The infrared transceiver is the small, dark red window on your portable computer, printer, digital camera, adapter,
or other device.
You can choose whether to hide or display the Wireless Link taskbar icon when two infrared devices are aligned. By
default, the Wireless Link taskbar icon is displayed.
Enter BIOS setup to verify whether the infrared device is enabled in BIOS, in IrDA, or Fast IrDA (FIR) mode. For
information about how to enter BIOS setup, see your computer manufacturer's documentation. If the infrared
device is disabled in BIOS, you might be able to use your computer's BIOS setup to enable it.
Warning: Using a BIOS setup utility incorrectly can cause your computer to operate incorrectly. Microsoft cannot
guarantee that problems resulting from the incorrect use of the BIOS setup can be solved. Use this utility at your
own risk. Before you make any changes, make a note of the original settings so that you can reinstate them if
necessary.
See your computer manufacturer's documentation to determine whether the BIOS needs to be updated.
1. Verify that at least one infrared device is listed and that it is enabled.
If infrared devices are listed but they are not enabled, verify that the infrared devices are installed correctly on
your computer. Infrared transceivers are now installed in nearly all new portable computers. If your computer does
not have an infrared transceiver, but it supports IrDA, and IrDA is enabled in BIOS, you can install an external
infrared transceiver.
Windows XP wakes from Hibernate faster than any earlier version of Windows. So you can preserve your batteries without
taking time to close all your files and shut down, and then restart and open all your files when youre ready to work again. If
you need to leave your computer, you can just leave it. Windows XP can automatically put your computer into Hibernate
mode after a specified period of inactivity. Or Windows XP can detect when your batteries are running low, and then
automatically put your computer in Hibernate mode to save your work before the battery fails. To put your computer into
hibernation, you must have a computer that is set up by the manufacturer to support this option.
To automatically put your computer into hibernation
You must be logged on to your computer with an owner account in order to complete this procedure.
1. Open Power Options in Control Panel. (Click Start, click Control Panel, and then double-click Power Options.)
2. Click the Hibernate tab, select the Enable hibernate support check box, and then click Apply.
If the Hibernate tab is unavailable, your computer does not support this feature.
3. Click the APM tab, click Enable Advanced Power Management support, and then click Apply.
The APM tab is unavailable on ACPIcompliant computers. ACPI automatically enables Advanced Power Management, which
disables the APM tab.
4. Click the Power Schemes tab, and then select a time period in System hibernates. Your computer hibernates after it
has been idle for the specified amount of time.
To manually put your computer into hibernation
You must be logged on as an administrator or a member of either the Administrators or Power Users group in order to
complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from
completing this procedure.
1. Open Power Options in Control Panel. (Click Start, click Control Panel, and then double-click Power Options.)
2. Click the Hibernate tab, and then select the Enable hibernate support check box.
If the Hibernate tab is not available, your computer does not support this feature.
3. Click OK to close the Power Options dialog box.
4. Click Start, and then click Shut Down. In the What do you want the computer to do drop-down list, click
Hibernate.
If you are using Windows XP Home Edition, or Windows XP Professional with Fast User Switching turned on, the Shut Down
menu will present the options to Stand By, Turn Off, or Restart your computer. Hold down the Shift key, and the Stand
By button will change to Hibernate.
Win XP Home
No
No
Yes
Yes
No
No
No
N/A
No
Win XP Pro
No
No
Yes
Yes
No
Yes
Yes
Yes
N/A
Right click on it and install the Promise Drivers. You can download them directly from here ftp://ftp.promise.com/Controllers/IDE/Ultra66/UltraFamily/U100d160b32.zip
Once you have the drivers installed re-boot the system and make sure the yellow exclamation points are gone and the
promise drivers are listed under SCSI devices, if they are then turn off your system, move the HD's back to the UDMA 100
controller and boot it up. That should fix it.
#2 - Fresh Install
If you plan on installing XP to a freshly formatted hard drive the easiest way I have found to do this is to use the above
method but for those with only one UDMA 66 controller on there motherboard you may need to do the following:
- First use the URL above and download the Promise drivers from the Promise website.
- Second you need to extract the drivers to a floppy or to the partition on your hard drive that XP can see (FAT32 works
great for this) but there is a trick to this in order to make XP see the drivers. Once you extract the drivers the promise
drivers automatically make folders for each individual OS (see screen shot), what you need to do is move the files from
under the Win2K directory to the of the Promise Folder. So you take the three files under the Win2K folder and copy them,
don't move them but copy them to the root of the main folder where you extracted the Promise drivers to (if you don't see
three files go to Tools/Folder Options/View and check "show hidden files"). The three files you need to copy to the area are:
- Ultra.cat
- Ultra.inf
- Ultra.sys
Now that you have all the files in the copy them to a floppy, reboot (if needed) and start your install of XP.
Now pay attention here - at the bottom of the very first blue setup screen you will see a prompt to hit F6 to install third
party SCSI or RAID drivers. HIT F6 A FEW TIMES NOW!!! Now it might take a couple of seconds but you should be prompted
to insert your drivers into your floppy drive. Do so and choose the Promise ATA100 controller. Keep this disk handy as you
will be prompted for it one more time during the install.
Once XP has the drivers and loads them successfully XP should install just fine, well at least as far as the controller goes.
FDISK Tutorial
The Basics of Fdisk:
Primary partitions are the only one that are bootable. They're always the C: drive when active. Normally you can only have
one (more with some special tricks etc.) Extended partitions are needed when you want more than one partition. You can
only have ONE Extended partition. Logical Drives come into the Extended partition. They are handy since you know that you
can only have one Primary and one Extended so you can get more than only two partitions. They would be your D:, E:, etc.
drives.
First you need to reboot your system with the Boot Disk inserted.
1.At the A: prompt start "FDISK."
2.If asked to use Large Disc support say Yes.
3.The first screen looks like this:
Create Dos Partition or Logical Drive
Set Active Partition
Delete Partitions or Logical DOS Drives
Display Partition Information
Change current fixed drive. (In case you have two or more Hard Drivess)
So, to prepare you hopefully did a backup from your data. You did, didn't you ?!
4.Next we need to remove the existing partitions. So go to 3.
5.Next screen like this:
Delete
Delete
Delete
Delete
Delete
Primary DOS
Extended DOS
Logical Drives
Non-DOS
always in the following order
Dual Boot XP
A computer can be configured to let you choose between two or more operating systems each time you restart the
computer. With multibooting, you can choose which operating system to run or specify a default OS if no selection is made
during the restart process.
Computers Containing Multiple Windows 2000 or Windows XP Partitions
Before installing Windows 2000 and Windows XP on the same machine, you need to prepare your system with different
partitions (a process that divides a hard disk into separate sections that can be formatted for use by a file system. Partitions
typically have different drive letters such as C or D).
One OS per partition
Its important to install each operating system on a different partition and install the applications used with each operating
system on the same partition as the OS. If an application is used with two different operating systems, install it on two
partitions. Placing each operating system in a separate partition ensures that it will not overwrite crucial files used by the
other OS.
Install Latest OS Last
In general, you should install the most recent OS lastafter you have installed all other operating systems on the target
computer. In this case, you should install Windows 2000 and then install Windows XP.
Disable CD Autorun
( WinXP PRO Only)
1) Click Start, Run and enter GPEDIT.MSC
2) Go to Computer Configuration, Administrative Templates, System.
3) Locate the entry for Turn autoplay off and modify it as you desire.
Notes:
Do not copy more files to the CD than it will hold. Standard CDs hold up to 650 megabytes (MB). Highcapacity CDs hold
up to 850 MB.
Be sure that you have enough disk space on your hard disk to store the temporary files that are created during the CD
writing process. For a standard CD, Windows reserves up to 700 MB of the available free space. For a highcapacity CD,
Windows reserves up to 1 gigabyte (GB) of the available free space.
After you copy files or folders to the CD, it is useful to view the CD to confirm that the files are copied. For more
information, click Related Topics.
To stop the CD recorder from automatically ejecting the CD
Open My Computer.
NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to
perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also
recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency
repair disk (ERD).
Speed Up Browsing
When you connect to a web site your computer sends information back and forth. Some of this information deals with
resolving the site name to an IP address, the stuff that TCP/IP really deals with, not words. This is DNS information and is
used so that you will not need to ask for the site location each and every time you visit the site. Although Windows XP and
Windows XP have a pretty efficient DNS cache, you can increase its overall performance by increasing its size. You can do
this with the registry entries below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
Make a new text file and rename it to dnscache.reg. Then copy and paste the above into it and save it. Merge it into the
registry.
and download the new driver if you have an SBLive card. However, some users are reporting that the DEVLDR problem
continues to plague them even with the new drivers:
" In the event installing the new drivers does not solve your shutdown problem, try some of the solutions people have been
using prior to the release of these new drivers. PCBUILD subscribers have written that they solved the well-documented
SBLive/DEVLDR32 problem by downloading and installing the LiveService software. (We caution that one should disable all
antivirus software while executing this program. I do recommend that you at least virus-check anything you download
first!)
" PCBUILD subscribers" gave another solution to this problem: Uninstall the LiveWare software pack (of which DEVLDR is
part). Uninstall the SBLive card. Restart Windows, let it detect the new hardware, and use the Windows XP driver. However,
other users have reported that this isn't satisfactory because the XP native driver gives very poor sound quality. If the new
drivers work for you, they are definitely the preferred option.
3D PROPHET 4500 VIDEO CARD
Other video cards that have created problems are those based on the Kyro II video chip, such as the Hercules Prophet 4500.
PCBUILD subscribers have reported that until they removed the Kyro II / Prophet 4500, they could shutdown, hibernate, or
go to stand by just fine, but Restart wouldn't work - it would shutdown Windows instead. Others with this video card have
reported this strange behavior on both restart and shutdown.
Apparently, this problem is now solved. Microsoft reports that new drivers for this card, specific to Windows XP, are now
available from Hercules. At present, they remain uncertified (PowerVR, who makes the Kyro II chip, is working on that), but
they reportedly work just fine. Download the Kyro II drivers here.
SHUTDOWN HANGS ON "SAVING YOUR SETTINGS"
During shutdown or reboot, Win XP may hang (stop responding) at the "saving your settings" screen. During such a hang,
there is no response to Ctrl+Alt+Del; the mouse may or may not work. (The problem may be intermittent.)
This is a known bug in Windows XP, for which Microsoft has a supported fix. Because this patch is scheduled for further
quality assurance testing in the future, Microsoft only recommends that you install it if you have a serious problem;
otherwise, they recommend waiting for Service Pack 1, which will include the more permanent version of the fix. To learn
how to get this patch, see Windows XP Stops Responding (Hangs) During Windows Shutdown.
As a workaround, we resolved this problem by dismantling the Windows XP logon Welcome screen. In the Control Panel,
click User Accounts, then click "Change the way users log on or off." Uncheck the box that says "Use the Welcome screen."
This removes the initial logon screen with individual icons for each user and, instead, pops up the classic logon prompt that
requires each user to type a user name and password.
"ShutMeDown" REGISTRY PATCH
Download the "ShutMeDown" Registry patch. Please follow sensible Registry editing protocol. Backup your Registry before
the change (or run System Restore to create a restore point). This is not the appropriate fix for most machines, but does
help a significant number. After installing, test Windows shutdown. If the fix does not work for you, remove it by restoring
the Registry to its prior state.
For those who want a little more background information, the fix provided by this patch is based on a Microsoft Knowledge
Base article Q155117 for Windows NT 4.0. It apparently still works in NT 5.1; that is, in Windows XP.
Stop Erros messages at shutdown
Some users have gotten an error message similar to the following when attempting either to shutdown or restart Win XP:
STOP 0000009F, DRIVER_POWER_STATE_FAILURE
STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
TechNet and the Microsoft Knowledge Base have numerous articles discussing this type of error condition; for example,
these. As a review of these articles will show, these are commonly device driver problems, but may also be caused by
troublesome software (such as the notorious CrashGuard), or a problem in a system service. MSKB article Q262575
discusses a shutdown problem of this type, known to exist in Windows 2000 due to a resource (IRQ) conflict, if you have
PACE Interlok anti-piracy software installed. This problem may occur in Windows XP as well.
Try the following as one approach to these problems: Restart the computer. Press F8 during the restart and select "Last
Known Good Configuration." If you catch the problem when it first occurs (meaning you likely have installed only one or two
drivers or new service), this will return you to a previous working condition.
It has been reported by a PCBUILD Subscriber that these STOP code error message occur when Windows XP is trying to shut
down devices. He says that he has seen this twice: once with Logitech Quickcam installed (with an unsupported driver), and
once with a USB DSL modem that would hang if it wasn't disconnected before shutdown.
Shutdown Works but its real slow
If it appears that Win XP is not shutting down, give it some time. Some users have reported a minute or longer for
shutdown to visibly start. Thus far, it appears that this is a consequence of software that is running when shutdown is
attempted, and it also may have something to do with particular hardware. If you are experiencing this problem, be sure to
close all running programs before attempting shutdown and see if this solves your problem. If so, then you can determine,
by trial and error, which program(s) are involved.
One specific solution for this can be found: In Control Panel | Administrative Tools | Services. (You can also get this by
launching SERVICES.MSC from a Run box. This utility is also built into the Computer Management console.) Stop the Nvidia
Driver Helper service. Many other newsgroup participants quickly confirmed that this solved this "extremely slow shutdown"
problem for them.
Powerdown Issues
"Powerdown issues" are quite distinctive from "shutdown issues." I define a shutdown problem as one wherein Windows
doesn't make it at least to the "OK to shut off your computer" screen. If Windows gets that far, or farther, then it has shut
down correctly. However, the computer may not powerdown correctly after that. This is a different problem, and I encourage
people reporting these issues to make a clear distinction in their labeling.
When Windows XP won't powerdown automatically, the APM/NT Legacy Power Node may not be enabled. To enable this,
right-click on the My Computer icon, click Properties | Hardware | Device Manager | View. Check the box labeled "Show
Hidden Devices." If it's available on your computer, there will be a red X on the APM/NT Legacy Node. Try enabling it and see
if this resolves the powerdown problem. (Tip from Terri Stratton.)
This should resolve the powerdown issue in most cases. However, other factors can sometimes interfere with correct
powerdown functioning. In that case, consider the following tips:
" If you changing the default power settings in the BIOS, it can lead to a powerdown problem. Restoring all BIOS power
settings to default will likely fix it.
PCBUILD subscribers reported that, when the above didn't work , they restored powerdown functioning by disabling his CDROM's AutoRun feature. The fastest way to do this is with the "Disable AutoRun" Registry patch which you can download
here.
Other Known Issues and Hints
" BIOS UPGRADE. As with every new operating system that comes along - especially one that is as much of a "step up" as
Windows XP is from Windows 9x - the recommendation is made to be sure your BIOS is updated. Many people have
reported that this has solved their shutdown problems (and had other advantages) with Win XP, just as it has in earlier
versions of Windows.
Quick Switching user Accounts
One reported quirk affecting shutdown is the three-account shuffle. Windows XP gives the ability to rapidly bounce between
user accounts, with Win+L. If at least three user accounts exist, and you quick-switch through all three, and then log off all
three in reverse order - "backing out" in an orderly way - then the machine may hang on shutdown. There may be other
variations of account shuffling that cause this, but this one, clear example was provided by newsgroup correspondent John
Ward. So far, I have no concrete clue on what may be occurring here.
saved the file (s) to and then simply install all your patches.
Read-me's are available in each patch section so you know which one you are installing.
On the Connections tab, click Never dial a connection, and then click LAN Settings.
In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.
In Proxy Server, clear the Use a proxy server check box.
A home network is a faster and simpler way to migrate your files and settings from your old computer to your new
computer. This scenario assumes you have two computers-an old computer and a new computer-on a home network. This
means that, before migrating, you will need to ensure that your new computer running Windows XP can "recognize" your old
computer on the network. The old computer contains your current settings and files that you want have on your new
computer.
Starting the wizard on your new computer
1. Click Start, All Programs, Accessories, System Tools, Files and Settings Transfer Wizard. When the Welcome to the Files
and Settings Transfer Wizard page appears, click Next.
2. Ensure New Computer is selected and click Next.
3. When the Do you have a Windows XP CD page appears, select I want to create a Wizard Disk in the following drive: and
click Next.
4. Insert a blank and formatted 3.5 inch floppy disk into your new computer's floppy drive. The wizard creates the disk and
prompts you to go to your old computer.
Starting the wizard on your old computer
1. Insert the wizard disk Into your old computer.
2. When the Welcome to the Files and Settings Transfer Wizard page appears, click Next.
3. When the Select a Transfer Method page appears, select Home or small office network, and click Next .
Selecting a transfer method.
4. When the What do you want to transfer page appears, select Both Files and Settings. Click Next.
5. The wizard scans your old computer and collects all of the settings you requested to migrate. This usually takes a few
minutes.
6. You are prompted to enter the password displayed on your new computer. Enter the password and click OK. When the
files and settings are collected, they are automatically transferred to your new computer. The new computer will then apply
those settings.
7. When the wizard finishes collecting and transferring the files and settings, it reaches the completion page. Click Finish and
return to your new computer.
Resuming the wizard on your new computer
1. The Files and Settings Transfer Wizard on your new computer is already applying your files and settings to your new
computer. Wait until it is finished.
2. When all the settings and files have been applied, the wizard reaches the Finished page. Click Finished. For the changes
to take effect, you need to restart the computer.
This is a much faster and more complete way to migrate your files and settings than using a 3.5-inch disk, but it does
require you to have a home network. Another way to transfer files and settings is via a direct cable connection explained
below.
Migrating to a New Computer Using a Direct Cable Connection
A simple way to migrate files and settings is to use a direct cable that connects your computers via the serial ports. You will
need a serial PC to PC file transfer cable, available from most computer stores. If you don't know the exact type of cable you
need, ask for assistance at a computer store.
Starting the wizard on your new computer
1. Click Start, All Programs, Accessories, System Tools, Files and Settings Transfer Wizard. When the Welcome to the Files
and Settings Transfer Wizard page appears, click Next.
2. Ensure New Computer is selected and click Next.
3. When the Do you have a Windows XP CD page appears, select I want to create a Wizard Disk in the following drive: and
click Next.
4. Insert a blank and formatted 3.5 inch floppy disk into your new computer's floppy drive. The wizard creates the disk and
prompts you to go to your old computer
Starting the wizard on your old computer
1. Insert the wizard disk Into your old computer.
2. When the Welcome to the Files and Settings Transfer Wizard page appears, click Next.
When the Select a Transfer Method page appears, select Direct Cable and click Next.
Direct cable connection.
When the Set up your serial connection page appears, complete the following steps.
o Connect your computers with a serial PC to PC file transfer cable.
o Go to the other computer and advance the wizard to the Set up your serial connection page.
o Click Autodetect on both wizards to select the serial port setting.
When the wizard shows a successful connection, click Next.
The wizard automatically transfers your files and settings to your new computer. You will need to restart your computer for
the changes to take effect.
Although both of the preceding scenarios did copy your files and settings, these defaults don't cover all situations and file
types. The following scenario describes how to customize the selection of what is migrated.
Migrating to a Clean Installation Of Windows XP
This advanced scenario assumes you have only one computer and are going to perform a clean installation of Windows XP
side-by-side with an existing installation of Windows. First, you need to complete a clean installation of Windows XP on your
computer, at a different location on your hard drive than your current installation. (It is important you do not choose
upgrade, but a clean installation.) You also want to be sure not to overwrite your old installation. The computer will need to
be able to boot into either operating system. This scenario assumes that you have already completed this dual installation.
For more information, see Multibooting with Windows 2000 and Windows XP at
http://www.microsoft.com/windows2000/techinfo/administration/management/mltiboot.asp.
Starting the wizard on your old operating system
1. Start your computer by booting into your old operating system. Insert the Windows XP CD.
2. When the Windows XP Welcome screen appears, click Perform Additional Tasks, then click Transfer
Files and Settings
3. When the Welcome to the Files and Settings Transfer Wizard page appears, click Next.
4. When the Select a transfer method page appears, select Other, and then click Browse to select a folder that has enough
room to store the collected files and settings. You will probably need at least 150 megabytes (MB). Note that later you will
need to locate the folder in which you stored the files and settings. Click Next.
The What do you want to transfer page appears allowing you to select settings only, files only, or both files and settings.
When you select an option, the page displays a list of what will be migrated.
5. Select Both Files and Settings and select Let me select a custom list of files and settings when I click Next .
Specifying files and settings for migration
6. Click Next. The Select custom files and settings page appears.
Customizing files and settings for migration.
On the Select custom files and settings page, you can add or remove known settings, file types, folders, or specific files. In
this scenario, you will want to migrate the default folders, because these are located in a different place in Windows XP;
however, you don't need to migrate any of the file types. You can access those files where they are now.
7. Select each of the items in the File Type's tree and click Remove. Leave all of the settings. When all of the File Types have
been removed, click Next.
The wizard now scans your existing Windows installation and collects all of the settings you requested to migrate. This
usually takes a few minutes.
8. When the wizard finishes collecting the files and settings, the completion page appears. Click Finish.
Starting the wizard on Windows XP
1. Start your computer by booting into Windows XP. Open the File and Settings Transfer Wizard.
2. When the Do you have a Windows XP CD page appears, select I don't need the Wizard Disk. I have already collected my
files and settings from my old computer. Click Next.
3. When the Where are your files and settings page appears, select Other and click Browse. Go to the folder share drive
where you stored your files.
The wizard begins reading the collected files and settings and applies them to your new installation.
4. When the settings and files have been applied, the completion page appears. Click Finished. For the changes to take
effect, you need to restart your computer and boot into your Windows XP installation.
Your files and settings from your old installation should now be applied on your new installation of Windows XP. Some files
are duplicated between the two installations, such as files on your desktop, in Favorites, or in My Documents. Other items,
such as your mail store, are also duplicated.
Summary
This guide walks you through the Files and Settings Transfer Wizard and explains all the steps needed to successfully use
this powerful tool. The wizard streamlines the process of using a new computer by making it easy to duplicate your old
computing environment and keep all your settings such as Favorites in Internet Explorer.
Copying your files is also made easier. Although uising a home network is the fastest way to copy files, 3.5 inch disks remain
a viable option for many users who don't have a network at home.
Furthermore, the wizard can also be useful in a "lightly managed" corporate environments where users are expected to
migrate their own files and settings without very much assistance from IT support professionals.
For large scale automated migrations, IT professionals should employ the User State Migration Tool, explained in the
companion paper User State Migration in Windows XP at
http://www.microsoft.com/TechNet/prodtechnol/winxppro/deploy/usermigr.asp.
Related Links
User State Migration in Windows XP at http://www.microsoft.com/windowsxp/pro/techinfo/howitworks/userstate
Multibooting with Windows 2000 and Windows XP at
http://www.microsoft.com/windows2000/techinfo/administration/management/mltiboot.asp
For the latest information on Windows XP, check out our Web site at
http://www.microsoft.com/technet/prodtechnol/winxppro/default.asp.
_____________________________________________________________________________________
This is a preliminary document and may be changed substantially prior to final commercial release of the software described
herein. The information contained in this document represents the current view of Microsoft Corporation on the issues
discussed as of the date of publication. Because Microsoft must respond to changing market conditions, it should not be
interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information
presented after the date of publication.
This white paper is for informational purposes only. MICROSOFT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, IN THIS
DOCUMENT.
Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no
part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by
any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written
permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the
furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual
property.
2001 Microsoft Corporation. All rights reserved. Microsoft, Outlook, PowerPoint, Windows, and Windows NT are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Other product and company names mentioned herein may be the trademarks of their respective owners.
M7icrosoft Corporation o One Microsoft Way o Redmond, WA 98052-6399 o USA
What are the design goals for Windows XP? What does it improve
Richer communications. Real-time voice, video and application-sharing will enable people to communicate more
effectively.
Enhanced mobility. Mobile users' ability to access their information any time, anywhere will be further improved.
Simple digital photos and video. Windows XP will make it easy to create, organize and share digital memories.
Enabling of the "connected home." Windows XP will give people an easy way to share information, devices and
Internet connections within the home.
Improved help and support. Users will be able to easily connect to people and resources for help whenever they
need it.
Exciting music and entertainment. Windows XP will deliver the best experience for the discovery, download,
personalization and playback of high-quality audio and video content.
Most programs that work on Windows 95/98/Me and NT will work on Windows XP. As with Windows 2000, several
compatibility updates are sure to made after the product is released. There will be problems running older DOS programs (if
they will run at all).
Everybody but the record industry agrees that the Microsoft licensing feature is awful. Luckily, you have a way to turn it off:
1. Choose Options from Media Player's Tools menu.
2. Click the Copy Music tab.
3. Remove any check mark from the box marked Protect Content.
If no check mark is there, Media Player doesn't embed any license or copy protection in your copied files. Disabling the
licensing feature lets you copy your files to any of your computers and portable music devices.
Take your favorite tunes with you transfer music to a portable player
Take your favorite tunes with you when you jog or work out at the gym. Windows Media Player for Windows XP is set up to
make the transfer of music to portable players as simple as 1-2-3. And since the music is stored on your computer hard
drive, you can keep refilling your portable player as often as you want.
To transfer music to a portable player
Connect your portable player to your computer, according to the directions supplied with the player.
Click Start, point to All Programs, and then click Windows Media Player.
Click Copy to CD or Device. If necessary, click the player to which you want to copy music.
Choose a playlist from the Music to Copy drop-down menu.
Clear the check boxes beside any tracks you do not want to copy.
Click Copy Music.
Although the big argument used to be about saturated and unsaturated fats, today's generation has found a new source of
disagreement: Should a computer be left on all the time or turned off at the end of the day? Both camps have decent
arguments, and there's no real answer (except that you should always turn off your monitor when you won't be using it for
a half hour or so).
However, if you decide to turn off your computer, don't just head for the off switch. First, tell Windows XP about your plans.
To do that, click the Start button, choose the Turn Off Computer command, and ponder the choices Windows XP places onscreen.
Click Stand By to temporarily put the computer to sleep, click Turn Off to turn off your computer, or click Restart to make
Windows XP shut down and come back to life.
Stand By: Save your work before choosing this option; Windows XP doesn't save your work automatically. Instead, it lets
your computer doze for a bit to save power, but the computer wakes up at the touch of a button.
Turn Off: Clicking here tells Windows XP to put away all your programs and to make sure that you've saved all your
important files. Then it turns off your computer and most of the newer monitors. Poof! Use this option when you're done
computing for the day. (If your monitor doesn't turn off automatically, you'll have to push its power button yourself.)
Restart: Here, Windows saves your work and prepares your computer to be shut off. However, it then restarts your
computer. Use this option when installing new software, changing settings, or trying to stop Windows XP from doing
something awfully weird.
Hibernate: Only offered on some computers, this option works much like Shut Down. It saves your work and turns off your
computer. However, when turned on again, your computer presents your desktop just as you left it: Open programs and
windows appear in the same place. Putting your computer into hibernation mode is not as safe as shutting it down. (Don't
see the Hibernate feature? Hold down Shift, and it will replace the Standby button.)
The Hibernate command takes all of your currently open information and writes it to the hard drive in one big chunk. Then,
to re-create your desktop, it reads that big chunk and places it back on your desktop.
Don't ever turn off your computer unless you've chosen the Turn Off command from the Start button. Windows XP needs to
prepare itself for the shutdown, or it may accidentally eat some of your important information as well as the information
of anybody else using the computer at the time.
Remember, if you're done with the computer but other people might want to use it, just click Log Off from the Start menu:
Windows XP saves your work and brings up the Welcome screen, allowing other people to log on and play video games.
When the Welcome to Windows screen appears, follow the instructions to complete your upgrade.
Go to Configure Windows XP for information on setting up user accounts and network connections.
1. Right-click on a folder you'd like to share and choose Sharing and Security from the pop-up menu.
Open My Computer and right-click on the folder you'd like to share. When the menu appears, select Sharing and Security. A
window appears, showing the Properties for that folder. It opens to the Sharing tab.
Right-click on a folder and choose Sharing and Security to share the folder on the network.
2. Click the box marked Share This Folder on the Network.
A check mark in that box lets everybody peek at, grab, steal, change, or delete any of the files in that folder. To let visitors
look inside the files but not change them, remove the check mark from the box marked Allow Network Users to Change My
Files.
3. Click OK.
Now that particular folder and all its contents are available for everybody on the network to share.
Sharing a lot of folders isn't a good idea because it gives network visitors too much control over your computer. Even if you
trust people, they might accidentally mess something up. To be safe, only share files by placing them in the Shared
Document folder.
Inside Shared Documents live two more folders, Shared Music and Shared Pictures. Those two folders are also available to
any user. So, if you want to share documents with any user of your computer, store them in the Shared Documents folder.
When you make MP3s from your CDs, store them in the Shared Music folder, too, so that everybody can enjoy them.
If you choose Windows Media Player instead of your third-party DVD player to watch DVDs, the controls are pretty much the
same as they are for playing CDs.
You probably need to update your DVD software so that it will work under Windows XP. Otherwise, your DVD software won't
work under Media Player, either. Head for the Web site of your DVD player's manufacturer and look for a Windows XP patch
or upgrade. If you're lucky, the manufacturer won't charge you for the upgrade. Some companies, however, make you buy a
new version.
DVD stands for Digital Video Disc & Digital Versatile Disc.
Bending to pressure, Microsoft made a last-minute deal with three companies to provide software for Windows Media Player
to create MP3s and play DVDs. The catch? The complete package costs between $20 and $30, with separate components
(the DVD decoder on its own, for instance) costing less.
The three companies, CyberLink, InterVideo, and RAVISENT, each offers a DVD Decoder Pack for Windows XP. After October
25, 2001, Windows XP users may order and download the add-on packs from each company's Web site through links inside
Windows Media Player.
If you've upgraded to Windows XP from an earlier version of Windows, and your old DVD software no longer works, using
the links to get the add-ons might be your best option.
To specify a schedule for updating that page, and how much content to download, click Customize.
Follow the instructions on your screen.
To make an existing favorite item available offline
On the Favorites menu, click Organize Favorites.
Click the page you want to make available offline.
Select the Make available offline check box.
To specify a schedule for updating that page, and how much content to download, click Properties.
To view Web pages without being connected to the Internet
After you mark your favorite pages for viewing offline, you can view them offline by following these steps
Before you disconnect from the Internet, on the Tools menu, click Synchronize.
When you're ready to work offline, on the File menu, click Work Offline. Internet Explorer will always start in Offline mode
until you click Work Offline again to clear the check mark.
In your Favorites list, click the item you want to view.
You can also make Web pages available offline without adding them to your Favorites list, by saving the pages on your
computer.
Follow these steps
On the File menu, click Save As.
Doubleclick the folder you want to save the page in.
In the File name box, type a name for the page.
In the Save as type box, select a file type.
Do one of the following:
To save all of the files needed to display this page, including graphics, frames, and style sheets, click Web Page, complete.
This option saves each file in its original format.
To save all of the information needed to display this page in a single MIMEencoded file, click Web Archive. This option saves
a snapshot of the current Web page. This option is available only if you have installed Outlook Express 5 or later. When you
choose Web Page, complete, only the current page is saved. With Web Page, complete and Web Archive, you can view all of
the Web page offline, without adding the page to your Favorites list and marking it for offline viewing.
To save just the current HTML page, click Web Page, HTML only. This option saves the information on the Web page, but it
does not save the graphics, sounds, or other files.
To save just the text from the current Web page, click Text Only. This option saves the information on the Web page in
straight text format.
After you've installed Windows XP Professional, you can configure common settings, including user accounts and network
connections.
If you already have a user account, log on to your computer with that account name and password. If you don't have a user
account, you must first log on as the administrator to create one.
Log On as the Administrator
Until you set up a user account on your computer, you need to log on as the Administrator. For security reasons, you should
create a user account for yourself and a user account for each person who may be using the computer.
After you complete Setup, your computer restarts and the Log On to Windows dialog box appears.
To log on as the Administrator
In Log On to Windows, type Administrator and the password you assigned to the administrator during Setup.
Click OK.
If a message appears informing you that the system could not log you on, verify that CAPS LOCK is not turned on, and then
retype your password.
IMPORTANT
Running Windows XP as an administrator makes the system vulnerable to unnecessary security risks. Instead, use your user
account to perform routine tasks such as running programs, working on documents, and visiting Internet sites.
Joining a Network
If you want to connect to a network during Setup, you must have the correct hardware installed on your computer and be
connected to your network.
If you will be using a network, first determine whether your computer is joining a domain or a workgroup.
If you're not sure, select Workgroup when you are prompted during Setup. (You can always join a domain later, after
Windows XP Professional is installed.) Any computer user can join a workgroupyou dont need special administrative
permissions. You must provide an existing or new workgroup name, or you can use the workgroup name that Windows XP
Professional suggests during Setup.
If you select Domain ask your network administrator to create a new computer account in that domain or to reset your
existing account. Joining a domain requires permission from the network administrator.
Joining a domain during Setup requires a computer account to identify your computer to the domain you want to join. If
youre upgrading, Setup uses your existing computer account; or if there isnt one, Setup prompts you to provide a new
computer account. Ask your network administrator to create a computer account before you begin Setup. Or, if you have the
appropriate privileges, you can create the account yourself and join the domain during Setup. To join a domain during
Setup, you need to provide your domain user name and password.
Unless you're an advanced user, it's recommended you use the default settings.
The Windows Update feature notifies you of the latest updates and bug fixes for the Windows XP operating system directly
from the Microsoft Web site. To launch the Windows Update, you click the Start menu, point at the All Programs button, and
then click Windows Update in the Programs menu.
As soon as you click select Windows Update on this menu, Windows gets you online and connects you to the Windows
Update Web page on the Microsoft Web site.
To have your computer checked out to see whether you're in need of some updated Windows components, follow these
steps:
1. On the Microsoft Windows Update Web page, click the Scan for Updates hyperlink.
When you click this hyperlink, the Windows checks your system for needed updates. After checking your system, the
number of updates appears in the list of three types of updates (Critical Updates, Windows XP, and Driver Updates) in the
pane on the left side of the window.
2. To have the Update Wizard install particular updates in one or more of the various categories, click the check boxes in
front of each update name and description.
3. After you have all the updates that you want selected, click the Review and Install Updates hyperlink in the pane on the
left side of the window.
4. Click the Start Download button on the Download Checklist page.
A license agreement dialog box then appears. Choose the Yes button to sell your soul to the devil (just kidding) and start the
download.
After you click the assent to the license agreement, the Microsoft Windows Update page downloads and installs the updated
files for the component(s) you selected. When the download and installation are complete, the message Download and
Installation Successful appears on Windows Update Web page.
5. Click the Close box in the upper-right corner of the Windows Update Web page to close this browser window.
Just in case you're the type who would never think to use the Windows Update command on the Start menu, Windows XP
turns on an AutoUpdate feature that automatically starts bugging you about new Windows features that you can download
and install.
AutoUpdate indicates that Windows updates that could benefit your computer are available by placing an Install Reminder
icon (with the picture of the Windows logo above a tiny globe) in the Notification area of the Windows taskbar. From time to
time, a ScreenTip appears above this Install Reminder icon, telling you that new updates are available.
To get the Windows updates downloaded or to silence the Install Reminder, click that icon in the status bar. Windows then
displays an Updates dialog box with three buttons along the bottom: Settings, Remind Me Later, and Install.
To go online and have Windows download and install the new updates (using the procedure outlined in the steps in the
preceding section), choose Install. To be reminded to update at a later time, choose the Remind Me Later button and then
select the time interval that must pass before the Install Reminder starts prompting you again in the drop-down list box of
the Remind Me Later dialog box that appears.
To turn off the AutoUpdate features so that it never bugs you again, follow these steps:
1. Click the Start button and then click Control Panel.
2. Click the Switch to Classic View button at the top of the Control Panel navigation pane on the left side of this window.
3. Double-click the System icon to open the Systems Properties dialog box.
4. Click the Automatic Updates tab and then in the Notification Settings section, click the Turn Off Automatic Updating, I
want to Update My Computer Manually radio button.
5. Click OK or press Enter to close the System Properties dialog box.
Some programs designed for earlier versions of Windows won't run under Windows XP. Until you can get your hands on a
program upgrade for Windows XP, you can try running the program in one of Windows XP Compatibility Modes by following
these steps:
1. Double-click the desktop shortcut called Run in Compatibility Mode that's automatically installed there when you install
Windows XP to open a full-size Help and Support window with instructions and controls for starting an application in
Compatibility Mode.
You can also open this window by clicking Start on the Windows taskbar and then clicking Help and Support on the Start
menu. Next, click the Find Compatible Hardware and Software for Windows XP link and then click the Program Compatibility
Wizard link at the bottom of the window navigation pane.
2. Read the instructions on the Welcome to Programs Compatibility Wizard screen, paying particular attention to the warning
about not using Compatibility Mode on programs, such as anti-virus software and backup tools, that specifically prohibit
their use on future editions of the operating system before you click the Next button.
3. In the next screen, click the radio button indicating how you want to locate the program you want to run: I Want to
Choose from a List of Programs, I Want to Use the Program in the CD-ROM Drive, or I Want to Locate the Program Manually.
4. If you selected the I Want to Choose from a List of Programs radio button, click the name of the program you want to run
in the list that appears before you click Next.
If you selected the I Want to Locate the Program Manually radio button, type the path to the program in the text box that
appears or click the Browse button and locate it in the Please Select Application dialog box and select the Open button
before you click Next.
5. In the next screen, called Select a Compatibility Mode for the Program, click the radio button for the version of Windows
under which your program used to run or was designed to run: Microsoft Windows 95, Microsoft Windows NT 4.0 (Service
Pack 5), Microsoft Windows 98/Windows Me, or Microsoft Windows 2000.
6. In the next screen called Select Display Settings for the Program, click the check box or boxes for the display settings
that are recommended for running the program.
These check box options include: 256 Colors, 640 x 480 Screen Resolution, and Disable Visual Themes.
7. Click the Next button to advance to the Test Your Compatibility Settings screen where you can verify your selections for
the program.
8. If your settings are correct, click the Next button to run the program in compatibility mode.
If Windows XP can run the program in the selected Compatibility Mode, the program then launches in a separate window. If
Windows can't run the application, you receive an alert box indicating that there's a problem. In such a case, you have to
contact the software manufacturer and get an upgrade for the application that's specifically designed for the Windows XP
operating system. Note that when you exit the program that you're running in compatibility mode, Windows automatically
returns you to the Program Compatibility Wizard in the Help and Support window.
If you use Windows XP on a local area network (LAN), and you save and open files in shared folders as part of a workgroup
on a server, you can create a virtual drive whose drive letter appears in the My Computer window along with those of your
local drives a process referred to as mapping a network drive. To map a network drive, follow these steps:
1. Click Tools-->Map Network Drive on the My Computer menu bar to open the Map Network Drive dialog box.
2. Click the Drive drop-down list button and select the drive letter you want to assign to the virtual drive containing this
network folder (note that the list starts with Z: and works backwards to B:) from the pop-up menu.
3. Type the path to the folder on the network drive in the Folder text box or click the Browse button and select the folder
directly from the outline of the network drives and folders shown in the Browse For Folder dialog box. Now click OK to close
the Browse For Folder dialog box and return to the Map Network Drive dialog box (where the path to the selected folder now
appears).
4. If you want Windows to recreate this virtual drive designation for the selected network folder each time that you start and
log on to your computer, leave the check mark in the Reconnect at Logon check box.
If you only want to use this drive designation during the current work session, click the Reconnect at Logon check box to
remove the check mark.
5. If you're mapping the network drive for someone else who uses a logon different from your own, click the Different User
Name hyperlink and enter the user name and password in the associated text boxes in the Connect As dialog box before you
click OK.
6. Click the Finish button in the Map Network Drive dialog box to close it and return to the My Computer window.
The network folder that you mapped onto a virtual drive now appears at the bottom of the contents area under a new
section called "Network Drives" and Windows automatically opens the folder in a separate window.
After mapping a network folder onto a virtual drive, you can redisplay the contents in the My Computer window by doubleclicking that drive icon.
To remove a virtual drive that you've mapped onto My Computer, click Tools-->Disconnect Network Drive; next click the
letter of the virtual drive in the Disconnect Network Drives dialog box and then click OK. Windows then displays an alert
dialog box warning you that files and folders are currently open on the virtual drive and that you run the risk of losing data if
files are open. If you're sure that you have no files open on that drive, click the Yes button to break the connection and
remove the virtual drive from the My Computer window.
If you use Windows XP on a local area network (LAN), and you save and open files in shared folders as part of a workgroup
on a server, you can create a virtual drive whose drive letter appears in the My Computer window along with those of your
local drives a process referred to as mapping a network drive. To map a network drive, follow these steps:
1. Click Tools-->Map Network Drive on the My Computer menu bar to open the Map Network Drive dialog box.
2. Click the Drive drop-down list button and select the drive letter you want to assign to the virtual drive containing this
network folder (note that the list starts with Z: and works backwards to B:) from the pop-up menu.
3. Type the path to the folder on the network drive in the Folder text box or click the Browse button and select the folder
directly from the outline of the network drives and folders shown in the Browse For Folder dialog box. Now click OK to close
the Browse For Folder dialog box and return to the Map Network Drive dialog box (where the path to the selected folder now
appears).
4. If you want Windows to recreate this virtual drive designation for the selected network folder each time that you start and
log on to your computer, leave the check mark in the Reconnect at Logon check box.
If you only want to use this drive designation during the current work session, click the Reconnect at Logon check box to
remove the check mark.
5. If you're mapping the network drive for someone else who uses a logon different from your own, click the Different User
Name hyperlink and enter the user name and password in the associated text boxes in the Connect As dialog box before you
click OK.
6. Click the Finish button in the Map Network Drive dialog box to close it and return to the My Computer window.
The network folder that you mapped onto a virtual drive now appears at the bottom of the contents area under a new
section called "Network Drives" and Windows automatically opens the folder in a separate window.
After mapping a network folder onto a virtual drive, you can redisplay the contents in the My Computer window by doubleclicking that drive icon.
To remove a virtual drive that you've mapped onto My Computer, click Tools-->Disconnect Network Drive; next click the
letter of the virtual drive in the Disconnect Network Drives dialog box and then click OK. Windows then displays an alert
dialog box warning you that files and folders are currently open on the virtual drive and that you run the risk of losing data if
files are open. If you're sure that you have no files open on that drive, click the Yes button to break the connection and
remove the virtual drive from the My Computer window.
Press the Windows Logo key + F1, use the TAB key to highlight Accessibility, and then press ENTER.
To learn more about Microsoft products available for people with disabilities, visit the Microsoft Accessibility Web site.
Note: The information in this section applies only to users who license Microsoft products in the United States. If you
obtained this product outside the United States, your package contains a card that lists Microsoft subsidiary support
services, telephone numbers, and addresses. Contact your subsidiary to find out whether the type of products and services
described here are available in your area.
Accessibility Wizard
The Accessibility Wizard asks you questions about your accessibility needs and automatically configures text size, and
settings for display, sound, and pointer.
To start the Accessibility Wizard
Click Start and point to All Programs. Then point to Accessories, point to Accessibility, and click Accessibility Wizard.
or
Press the Windows Logo key , press P to open All Programs, and then press ENTER. Press A to open Accessories, press
ENTER to open Accessibility, and then press ENTER again to start Accessibility Wizard.
Note: Utility Manager lets you start, stop, and check the status of the accessibility programs you select from the Accessibility
Wizard.
To open the Utility Manager
Click Start and point to All Programs. Then point to Accessories, point to Accessibility, and click Utility Manager.
or
Press the Windows Logo key , press P to open All Programs, and then press ENTER. Press A to open Accessories, press
ENTER to open Accessibility. Use the arrow keys to highlight Utility Manager, and then press ENTER.
Accessibility Options
Accessibility Options allow you to directly customize keyboard, display, and mouse functions.
To open Accessibility Options
Click Start, click Control Panel, and then click Accessibility Options.
or
Press the Windows Logo key , use the arrow keys to highlight Control Panel, and then press ENTER. Use the TAB key to
highlight Accessibility Options, and then press ENTER.
Windows XP functions
On a domain
In a workgroup
NETWORKING
Part of a local area network (LAN)
YES
YES
YES
YES
GENERAL OPTIONS
Welcome screen available
YES
YES
YES
YES
YES
YES
YES
YES
Disk
configuration
Basic disk
This is the common name for the hard disk in your computer. You have a basic disk unless you have
converted it to dynamic disk. MS-DOS and all Windows-based operating systems can access basic disks. A
basic disk can contain up to four primary partitions. A partition is a section of the disk that functions as a
separate unit. Each partition can have a different file format and different drive letter, for example, C: and
D:. Each operating system must be on a separate partition.
Single dynamic
disk
If you have one hard disk and you have converted it to dynamic disk, you can install only one operating
system. You cannot multiboot.
To determine if you have a dynamic hard disk, click Start, click Control Panel, click Performance and
Maintenance, click Administrative Tools.
Double-click Computer Management, and then click Disk Management. In the right pane, your disk will
be labeled as a basic or dynamic type.
Multiple
dynamic disks
If you have two or more hard disks installed in your computer, each dynamic disk can contain one
installation of Windows XP Professional, or Windows 2000. No other operating systems can start from a
dynamic disk. Windows XP Home Edition does not support dynamic disks.
Error Message "Setup Was Unable to Build the List of Files to Be Copied"
During a Windows XP Unattended Installation
Q281653
Q282008
Q282296 Setup from the 16-Bit Winnt.exe File Continues in an Endless Loop
Q283079 No Mouse or Keyboard Response During Sysprep Mini-Setup
Q283240 Quitting Text-Mode Setup Does Not Restart the Computer
Q283332
Q287546
Q289657 Out of Box Experience (OOBE) Does Not Run After Setup Completes
Q293281 Unpartitioned Space Remains When Creating a Partition During Setup
Q293834 User Accounts That You Create During Setup Are Administrator Account Types
Q295116 A Description of the Windows XP Setup Function Keys
Q296673 Windows Services for UNIX 2.0 Setup Does Not Work on Windows XP
Q296814 Setup Stops Responding (Hangs) During File Copy
Q297837
The CD-ROM Drive May Not Be Accessible During Setup on Computers That
Have DirectCD Installed
Q301340
During Setup You Are Unable to Format a Partition with a File Allocation Table
Format
Q301933
Error Message: Setup Was Unable to Build the List of Files to Be Copied. The
System Cannot Find the Path...
Q302686 Differences Between a Quick Format and Format During Windows XP Setup
Q303466
Q305746 Windows XP Setup Halts When You Start Installation from Within Windows 95
Q305883
Q307099
STOP 7b Error Occurs When You Press F6 to Load Drivers During Unattended
Windows XP Setup
Q307316
Windows needs a place to store your programs and files. So, it borrowed the file cabinet metaphor, translated it into light
and airy Windows icons, and called it the My Computer program. My Computer shows the files and storage areas inside your
computer, allowing you to copy or move them, rename them, or delete them.
Everybody organizes his or her computer differently. Some people don't organize their computers at all. To see how your
computer has been organizing your files, click the Start menu and click My Computer.
The My Computer program is a big panel of buttons sort of an extension of your desktop. Here's a brief rundown on what
those big icons along My Computer's right side mean:
Files Stored on This Computer: Windows XP lets many people use the same computer, and everybody's files stay private.
However, sometimes everybody wants to share information letters from relatives, for instance. That's where the Shared
Documents folder (shown in the margin) comes in.
The Shared Documents folder contains files and folders accessible to everybody that uses the computer. To share things with
other users of your computer, call up My Computer and store the information inside My Computer's Shared Documents
folder. (Double-clicking any folder shows its contents.)
Two additional folders live inside the Shared Documents folder: Shared Music and Shared Pictures. Everybody using the
computer may also access music and pictures stored in here.
If you don't want other users to share your information, keep it out of the Shared Documents folder. Instead, store the
information in your My Documents folder, accessible from the Start menu. (See the Other Places area listed along My
Computer's left side, as shown in Figure 1? You can also open your My Documents folder from there by clicking its name.)
Notice two other folders in Figure 1, one belonging to Guest and the other to Tina? You see those folders because you're
viewing the My Computer area of an administrator's account. The administrator can peek inside the files of any other user.
So, Figure 1 shows the My Documents folders of two other users, Tina and the Guest account. Those folders are called Tina's
Documents and Guest's Documents, respectively.
Hard Disk Drives: This one's not too difficult. It lists the hard drives installed on your computer. Double-clicking a folder
here shows what's inside, but you rarely find much useful information. In fact, Windows often simply tells you to back off
and look for programs on your Start menu, instead. Unlike files and folders, hard dives can't be moved to different areas.
Devices with Removable Storage: This area shows stuff you take in and out of your computer: floppy drives, CD-ROM
drives, Iomega Jaz drives, and even MP3 players, if they're Windows XP compatible, like the HipZip's PocketZip player shown
in Figure 1.
Scanners and Cameras: Digital cameras and scanners often appear down here, depending on their make and model.
Unlike files and folders, Hard Disk Drives, Devices with Removable Storage, and Scanners and Cameras can't be moved to
different areas. They're stuck where they live in the My Computer area. To make them more accessible, you can place
shortcuts to them on your desktop or any other convenient spot.
My Computer also includes several boxes along its left side. They serve mainly as shortcuts pointers that take you to
other areas on your computer. The boxes change according to what you're viewing in My Computer. These choices appear
when you first open My Computer, and here's what they mean.
System Tasks: Both items listed here, View System Information and Add or Remove Programs, deal with your computer's
innards. They're shortcuts to icons on Windows XP's Control Panel.
Other Places: Three of these items, My Network Places, My Documents, and Control Panel, are simply shortcuts to items
that appear on your computer's Start menu.
You may wonder (as others have) why there's a shortcut to the Shared Documents folder here, because the Shared
Documents folder already appears a few inches to the right, as you can see in Figure 1. Hmmm, a mystery.
Details: Finally, something interesting. Click almost any icon in My Computer, and the Details window automatically displays
information about that object: the date a file was created, for instance, or how much space it consumes.
Installing Windows XP with MS-DOS, Windows 95, Windows 98 or Windows Millennium Edition
You must address file system compatibility to ensure a multi-booting configuration with these earlier operating systems and
Windows XP. Remember to install the latest operating system last, otherwise important files may be overwritten.
Checklist Summary
To configure a computer containing Windows XP and Windows 9x or MS-DOS, review the following guidelines:
On computers that contain MS-DOS and Windows XP:
MS-DOS must be installed on a basic disk on a partition formatted with FAT. If MS-DOS is not installed on the
system partition, which is almost always the first partition on the disk, the system partition must also be formatted
with FAT.
Windows XP must be installed last. Otherwise important files needed for starting Windows XP could be overwritten.
As in the case above, Windows 95 must be installed on a basic disk on a partition formatted with FAT. (For
Windows 95 OSR2, FAT32 may be used.) If Windows 95 is not installed on the system partition, which is almost
always the first partition on the disk, the system partition must also be formatted with FAT (or FAT32 for Windows
95 OSR2).
Compressed DriveSpace or DoubleSpace volumes wont be available while you are running Windows XP. It is not
necessary to uncompress DriveSpace or DoubleSpace volumes that you will access only with Windows 95.
Windows XP must be installed last. Otherwise important files needed for starting Windows XP could be overwritten.
On computers that contain Windows 98 (or Windows Me) and Windows XP:
As in the cases above, Windows 98 or Windows Me must be installed on a basic disk on a partition formatted with
FAT or FAT32. If Windows 98 or Windows Me is not installed on the system partition, which is almost always the
first partition on the disk, the system partition must also be formatted with FAT or FAT32.
Compressed DriveSpace or DoubleSpace volumes wont be available while you are running Windows XP. It is not
necessary to uncompress DriveSpace or DoubleSpace volumes that you will access only with Windows 98.
Windows XP must be installed last. Otherwise important files needed for starting Windows XP could be overwritten.
7. Click the manufacturer and the model of the printer in the Manufacturers and Printers list boxes, respectively, of the
Install Printer Software dialog box.
If you have a disk with the software for the printer, put it into your floppy or CD-ROM drive and then click the Have Disk
button: Select the drive that contains this disk in the Copy Manufacturer's Files drop-down list box and then click OK.
8. Click the Next button to advance to the Name Your Printer dialog box.
If you want, edit the name for the printer in the Printer Name text box. If you want to make the printer that you're installing
the default printer that is automatically used whenever you print from Windows or from within a Windows program, leave
the Yes radio button selected beneath the heading, Do you want your Windows-based programs to use this printer as the
default printer?
9. Click the Next button to advance to the Printer Sharing dialog box.
If you want to share this printer with other users on the network, click the Share Name radio button and then, if you want,
edit the share name (this is the name that the other users on the network see when they go to select this printer for
printing their documents) that the wizard gives the printer in the Share Name text box.
10. To print a test page from your newly installed printer, click the Yes radio button selected beneath the heading, Would you
like to print a test page? in the Print Test Page dialog box.
11. Click the Next button to advance to the Completing the Add Printer Wizard dialog box, where you can review the settings
for your new printer before you click the Finish button or press Enter to finish installing the new printer.
To use the Add Printer Wizard to install a printer that's available through your Local Area Network, you follow just slightly
different steps:
1. Click the Start button on the Windows taskbar and then click Control Panel on the right side of the Start menu.
2. Click the Printers and Other Hardware hyperlink if the Control Panel window is in Category View. Otherwise, double-click
the Printers and Faxes icon if the Control Panel window is in Classic View.
3. Click the Add a Printer hyperlink in the Printers and Other Hardware window to start the Add Printer Wizard and then click
the Next button or press Enter to advance to the Local or Network Printer dialog box.
4. Click the A Network Printer or a Printer Attached to Another Computer radio button in the Local or Network Printer dialog
box and then click the Next button or press Enter to the Specify a Printer dialog box.
5. If you know the name of the network printer, click the Connect to This Printer (or to Browse for a Printer, Select this
Option and click Next) radio button and then enter the network path in the Name text box.
If your network printer is on a network that uses an Internet address and you know this URL address, click the Connect to a
Printer on the Internet or on a Home or Office Network radio button and then enter the address in the URL text box. If you
know neither of these pieces of information, leave the Browse for a Printer radio button selected and then click Next to
advance to the Browse for Printer dialog box.
6. In the Browse for Printer dialog box, locate the printer in the Shared Printers list box by clicking the network icons until
you expand the outline sufficiently to display the printer icon.
When you click the printer icon in this outline, the wizard adds the path to the Printer text box above.
7. Click the Next button to advance the Default Printer dialog box.
If you want to make the printer that you're installing the default printer that is automatically used whenever you print from
Windows or from within a Windows program, leave the Yes radio button selected beneath the heading, Do you want your
Windows-based programs to use this printer as the default printer?
8. Click the Next button to advance to the Completing the Add Printer Wizard dialog box, where you can review the settings
for your new printer before you click the Finish button or press Enter to finish installing the new printer.
After you add a printer to your computer, you can start using it when printing with programs such as Word 2002 and Excel
2002, or when printing from Windows itself.
To switch to a new printer that you haven't designated as the default printer in programs such as Word and Excel, you need
to open the Print dialog box (choose File-->Print) and then select the printer name in the Name drop-down list box.
There are three reasons why you may need to install a new copy of Windows XP:
Your current operating system supports an upgrade to Windows XP Professional, but you dont want to keep your
existing files and personalized settings.
The setup process is similar for new installations and upgrades with a few notable exceptions. For example, during a new
installation, you are able to configure Special Options, convert your file system, and create a new partition for the Windows
XP installation.
IMPORTANT
A new installation deletes all programs or system files from a previous installation.
Special Options
Under Special Options, you have the choice to change Language, Advanced, and Accessibility settings during the setup
process.
Note: If you are in a country that has recently adopted the euro as its currency, you may have to modify the currency
settings to display monetary amounts correctly.
For more information, go to Help and Support Center and type euro in the Search box.
Select
Language
Choose the primary language and regions for Windows XP, which affects
the default settings for date, time, currency, numbers, character sets, and
keyboard layout.
Choose additional language groups and character sets to use with the
programs you are running on Windows XP.
Advanced
Options
Accessibility
Store system files in a folder other than the default (Windows) folder
IMPORTANT
Unless you're an advanced user, it's recommended that you use the default settings.
FAT32: An enhanced version of the file allocation table (FAT) system that is standard on all Windows operating
systems starting with later (32-bit) versions of Windows 95. The FAT32 system can be used on large hard disks,
from 512 megabytes (MB) to 32 gigabytes (GB).
NTFS: The NT file system (NTFS) is used with the Windows NT, Windows 2000, and Windows XP operating
systems. NTFS provides enhanced reliability, stability, and security, and supports large hard disks of up to 2
terabytes (TB).
IMPORTANT
You can convert your file system any time, even after you install Windows XP, without losing any of your data.
The conversion to NTFS is oneway only; if you convert your FAT or FAT32 file system to NTFS you cant convert your hard
disk back to FAT later.
If youre not sure which file system to use, keep the one your computer defaults to during Setup. If you want to change your
file system, here are a few recommendations:
Use NTFS if your hard drive is larger than 32 GB and you are running only one operating system on your computer.
Use FAT32 if you want to install more than one operating system on your computer.
Disk Partitions
You can create partitions to organize informationfor example, to back up dataor to install more than one operating
system on your computer. A hard disk can contain up to four partitions.
If youre performing a new installation, the appropriate disk partition is selected automatically during Windows XP Setup
unless you click Advanced Options and specify your own requirements
For more information about configuring, sizing, reformatting, or converting disk partitions, see your current online Help
before you install or upgrade to Windows XP Professional.
The The application for which to apply the fix(es) check box. This setting disables existing fixes in the
database.
The Layer tab with the Choose one of the existing layers to apply to your app box that contains the following
entries:
256 Color
640X480
Disable Themes
Internaltional
LUA(Limited User Account)
LUACleanUp
NT4SP5
ProfilesSetup
Win2000
Win95
Win98
The Fixes tab. On this tab you can select the individual fixes that you want to apply.
Example of How to Use Qfixapp.exe
1. Start Notepad, and then click About Notepad on the Help menu. Note that the version is 5.1.
2. Start Qfixapp.exe, click Win95, click Browse, and then open the Windows folder. Note that the Windows\System32
folder is protected by Windows File Protection, so it is not able to use the layers.
3. Click Notepad.exe, click Open, and then click Run.
4. Start Notepad, and then click About Notepad on the Help menu. Note that the version is now 4.0.
If you click ViewLog, you could see what AppFix(es) are being used. If you click Advanced, you could see information
about the .exe file. You can click Add Matching Info, and then select files that are related to the .exe file to identify that
particular program. After you finish that step, you could click Create Fix Support to add the layers with the Matching
Information (GRABMI) and create an XML-based database that is named YourAppName.sdb. Note that in the preceding
example it is named Notepad.sdb, and is in the AppPatch folder.
Roxio will have XP patches available on their website soon, but only for their latest edition of CD creator. Roxio will not
support Easy CD Creator 3.X and 4.X for Windows XP, and the user will be required to purchase the upgrade to Easy CD
Creator 5 Platinum.
Windows XP does not have a CD burning interface, but it has CD burning artfully integrated into the operating system.
However, third-party CD burning software is still necessary for those who want to burn more than the occasional audio CD.
The .vxd drivers used in Windows 98 are not supported at all by Windows 2000 and Windows XP. Using these drivers could
create more issues in Windows XP, and you should stay away from them. Check your device manager, and disable those
devices that have yellow cautionary flags if you are unable to locate an appropriate driver.
Now that XP has been officially released on the market, manufacturers of those components that are lacking compatible
drivers should be issuing those drivers in the near future. Keep checking those manufacturers' websites. When the driver
become available, enable those devices, and update the drivers.
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this,
do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch
Add/Remove Windows Components, and tweak the installed applications to your heart's content.
Windows
Windows
Windows
Windows
95
98/ME
NT (Service Pack 5)
2000
So if you're having trouble with a particular application or game under XP, right click on the application's icon and click on
the "Compatability" tab. You can also set a forced resolution of 640x480, force 256 (8-bit) color, and force the system to
disable themes.
If I upgrade from Windows 98 or ME to Windows XP, can I revert back?
Yes, but I haven't done it myself so I don't know what the consequences are from upgrading, and then downgrading again.
If you upgraded, there should be an item in "Add/Remove Programs" that allows you to uninstall XP. Note: if you upgraded
to XP, and then changed your file system to NTFS, you cannot go back to 98 or ME since those operating systems don't
understand how NTFS works.
Will my games work under Windows XP?
This is even more complicated than the application issue. Games are supposed to be written to not only the Win32 API, but
any one of many different graphics APIs such as Direct 3D or OpenGL. Sometimes games take a "short cut" to gain better
performance. Since Windows XP is built on a different core than Windows 95, 98, and ME, it's possible that some games
won't work. You can read more about games under XP by clicking here.
Can I watch DVDs on Windows XP?
Not "out of the box", unfortunately. Microsoft is forcing consumers to buy a "DVD Decoder Pack" to allow playback of DVDs.
You can read more about that by clicking here.
Can I listen to MP3s with Windows XP?
Yes. Windows Media Player will playback MP3s. If you're Yes. Windows Media Player will playback MP3s. If you're having
trouble playing MP3s with Windows Media Player, make sure you have the latest update.
Can I rip MP3s with Windows XP?
Just like the DVD issue, you cannot rip MP3s with XP "out of the box". You'll have to buy the "MP3 Pack" which allows you to
add MP3 ripping capabilities to Windows Media Player. However, you can use Music Match Jukebox and other third-party
rippers as you have before, so long as they work under XP (chances are they do, but check the web pages of the
applications to be sure). You can read more about music under XP by clicking here.
Can I have multiple operating systems installed on the same computer alongside Windows XP?
Yes. There's a procedure that's involved in order to do it properly. If you're installing Windows XP on a machine that already
has another Windows OS, you have to make sure that you can install XP on a seperate partition, or a seperate hard drive.
You cannot install XP on the same hard drive or partition that already has another operating system on it, meaning two OS's
can't share the same space at the same time. The key is to install Windows XP last, this way the NT boot loader, which
allows you to choose which OS to load at boot time, is installed by the XP installer. Microsoft has an article about
multibooting.
What are the requirements for running Windows XP?
The minimum requirements can be found by clicking here.
If I'm buying the XP upgrade version, do I have to install over my old OS, or can I install fresh?
You can most certainly install fresh. When installing XP, you'll be prompted for your previous OS's CD. Once XP sees that it's
a valid CD, you switch CDs again and the XP installer continues on its merry way.
What are the upgrade paths for Windows XP? Do I need to buy the full version?
All the valid upgrade paths for the Home and Pro versions can be found by clicking here.
I got a PC from with a restore CD instead of an actual Windows installer CD, is it considered valid for an
upgrade?
This is tricky. Some PC manufacturers give the user a "Restore CD" which, although has a version of Windows on it, is
nothing more than a "snapshot" of the hard drive when the user opened the box for the first time. Chances are, when the XP
upgrade asks for the previous Windows OS CD, it will reject the Restore CD since it wasn't made by Microsoft. Your best bet
would be to check with the manufacturer of your PC and see if you have an upgrade option. I'm still looking on Microsoft's
site for a definitive answer on this.
Will Windows 2000 drivers run under XP? I heard that XP is just Windows 2000 with a new face.
There's no guarantee that Win2k drivers will work under XP. I wouldn't suggest even trying since it might make your system
unstable. The best you can do is to check with your device's manufacturer first and see if they already have XP drivers ready
for you to download from their web site.
I see there are two versions of XP - Home and Professional. Which one should I get?
Microsoft did a very good job of splitting the two versions, and making sure that one group doesn't need the features of the
other flavor of XP. The only issue I can see i Microsoft did a very good job of splitting the two versions, and making sure that
one group doesn't need the features of the other flavor of XP. The only issue I can see is the multi-processor support you get
from the Pro version, and if it will affect gaming. Click here to read Microsoft's comparison of the two.
Like many other audio players, Windows Media Player rushes out to the Internet to find information for you when you play a
CD. Some of this information, such as song titles and album art, is useful, but Media Player also identifies your copy of
Media Player to the site where it's getting data. Why? According to the help file, "The server uses this unique identifier to
monitor your connection. By monitoring your connection, the server can make adjustments to increase the playback quality
and to alert you about events that occur when receiving streams over the Internet."
If you're disturbed by this exchange of information, here's how to stop it. In Windows Media Player, click Tools > Options and
go to the Player tab. Notice the option that says "Allow Internet sites to uniquely identify your player?" Turn it off.
Microsoft Product Activation which will only allow you to install Windows XP on one system at a time. Under this new policy,
you must use the CD Key code that comes with the software to install the operating system. You'll then have 30 days in
which to contact Microsoft, either via the Internet or by telephone, and activate the software.
When you do, you won't have to give Microsoft any personal information, just your CD Key code. Microsoft will assign you an
activation code, which you'll then enter in the appropriate text box in the Microsoft Product Activation wizard. If you don't
activate the software within the 30-day period, you won't be able to boot Windows XP past a dialog box that prompts you to
enter activation code.
When you enter the activation code, it supposedly analyzes your system's specific hardware configuration, generates some
hardware ID code based on this information, and then associates the activation code with this hardware ID code. If for some
reason you have to reinstall Windows XP on the same system, you'll be able to use the same activation code.
If you purchase an additional computers and you want to install Windows XP on your new system instead, you'll need to
reactivate the software. While Microsoft says it's possible to install it on another machine, it's unclear how exactly this will
work under its license agreement. Consumers should refer to the terms of their license agreement to determine whether or
not it is legal to transfer a license to another computer. But in those cases where it is allowed, the product must first be
removed from the previous computer. Users may be required to complete the activation on the new computer by placing a
call to the Microsoft Activation Center. The details are still a bit hazy, but you can be sure that Microsoft will figure them out
before the release.
If you only have one PC and rarely reinstall the operating system, this really won't be a problem. but, if you have multiple
PCs in your home, you won't be able to buy one copy of Windows XP and install it on all the PCs in your home. Instead,
you'll need to buy one copy for each system.
This may sound harsh, it's actually been a part of the Microsoft End-User License Agreement for years. The only difference is
that now Microsoft has developed a physical way to enforce what the paper license has said all along.
No Java in Windows XP
Microsoft has announced it will not include support for the Java programming language in the upcoming Windows XP. After
settling a lawsuit with Java creator Sun Microsystems in January, the software giant decided the easiest way to prevent
further litigation was to simply remove the code entirely.
The settlement stipulated that Microsoft would no longer license Java from Sun, and refrain from stating that Windows is
"Java Compatible." Outdated Java support will remain available as an added download from Windows Update if required.
Java's removal from the software giant's new operating system comes on the heels of announcements surrounding .NET,
Microsoft Web services based on XML.
These services are accessed over the Internet from a variety of devices. Coincidentally, Sun has been developing its own
Java-based version of .NET, dubbed Jini. However, Microsoft vehemently denies claims that it intends to phase out support
for Java as an attack on Sun.
Obviously, more is better; exceeding these recommendations will only improve your system's
performance. Your CPU's speed and the amount of RAM you have is usually shown on the
screen when you turn on your PC. Based on our experience, your disk drive should support
Ultra-ATA66 or ATA100 IDE and have a fast average seek time of 10 milliseconds or less with
256-512KB of on-drive cache buffering.
Your video card should be a PCI version with 4MB or more of video RAM; AGP is even better.
Your CD-ROM drive should be a late-model ATAPI device providing 8X, 12X or 16X
performance. Your sound card should also be a late-model, name-brand PCI version.
The specifications for your CD-ROM or hard drive are usually printed on the label on the drive
itself. The drives included with most systems built since 1999 should meet these specs just
fine. You can look up the specs for your devices by their model numbers on the equipment
manufacturer's Web site. Don't know the make or model of the hard drive, CD-ROM drive, or
video or sound card you have? You can look these up through Start > Settings > Control
Panel > System; select the Device Manager tab, then double-click the devices in the list.
Older I/O cards that use the ISA I/O slots (usually the longer black connectors on your
system board) will perform slower than cards that use PCI (typically white connectors) or
AGP (typically green connectors) I/O slots on your system board, and could make it harder
for Plug and Play and Windows to configure your system. System boards with built-in video
and sound features already use the PCI bus, so they're as fast as they are going to get.
Like Windows Millennium Edition, NT, and 2000, XP does not load DOS or real-mode drivers
and programs before Windows start-up. If XP recognizes your hardware, it will try to use its
own new drivers, but if you have a very old (say pre-1995 or 1996) CD-ROM drive or an ISAbus sound card that required drivers to be loaded in your C:\config.sys and C:\autoexec.bat
files, XP may not support those devices. For performance reasons, you probably want newer
hardware anyway.
Hint: We've found that, in many cases, if your hardware or peripherals lack XP driver
support, you can download and install Windows 2000 drivers for the devices, and they will
work just fine, although you may get a pop-up message from XP telling you that the drivers
you are installing are unsigned (not registered with Microsoft) and therefore not proven to
work. Fortunately, you can use XP's System Restore feature to keep track of things before
and after you try them and back out if you need to.
Additional hardware requirements
Now that you have the baseline requirements, here are a few items you'll need to fully take
advantage of Windows XP.
Windows XP:
For using the Internet in general and
Microsoft's .Net Internet-based services and
features (including Passport credentials, email, Microsoft Messenger, voice and
videoconferencing, Remote Assistance, Remote
Desktop, and application sharing):
Videoconferencing camera;
microphone and sound card with
speakers or headset
For sound:
Windows XP Authentication
It wouldn't be fair to start off without placing a link to Microsoft's article about Windows XP
activation. In a nutshell, XP Activation is an anti-piracy technology that links your computer
to the CD that installed XP. This way, if someone tries to install XP from the same CD, when
XP installation goes out to the internet to activate XP, it will see that the CD that XP is being
installed from already has a PC linked with it, and that the PC that it's currently being
installed on isn't that same PC that's in the Microsoft database. If this happens, you can use
XP for a certain period of time, but after that time (I think it was changed to 30 days), you
cannot boot back into XP on that second PC without calling Microsoft and getting a 50-digit
activation code.
At first I thought it was a little extreme, and I still think it is. Technically, according to the
EULA, you can only install Windows on one PC.
You can find the End User License Agreement (EULA) in c:\windows\system32\eula.txt if you
need to refer back to it after installation.
Nowadays, PCs are sold with either a DVD-ROM drive, or a CD-R drive. There are drives that
do both, there are even drives that burn both. Either way, those of you with DVD-ROM drives
will want to know if you can play DVD movies on your XP machine. XP out of the box won't
play DVD Video. DVD's video is stored in a format called "MPEG 2", and you need an MPEG
decoder to get the video off the DVD into a format that the computer can show you.
Without yet installing any third-party applications, I popped in my DVD of Fantasia 2000. XP
asked me which application I wanted to open the disc with and I selected "Windows Media
Player" since it was the only option - the other one being "Do Nothing". When WMP started I
got a message box saying "WMP cannot play DVDs because there is no DVD decoder".
As a registered user of PowerDVD 3.0, I installed it on my XP machine. After reboot, I got an
error about a missing ASPI file, but ignored it. I rebooted again and the message didn't come
up a second time. Update Oct. 16, 2001: After installing PowerDVD 3 under the retail version
of Windows XP Pro, this message no longer shows up. The error happened under Win XP
Home Edition RC2. I started Power DVD 3.0 and without any hassle, Fantasia 2000 was
playing on my PC.
I don't know the exact reason why Microsoft chose not to include DVD decoding in their XP
operating system, especially since Apple includes DVD decoding in MacOS 9 and the soon to
be released MacOS 10.1.
Update: Microsoft announced MP3 and DVD support via third-party add-on packs, available
on Oct. 25, 2001.
XP expires
To reduce instances of "casual copying" (a nice name for software piracy), Microsoft has
implemented a two-stage antipiracy scheme in its upcoming OS. The first stage is the
installation and registration counter: this lets you install Windows XP only five times on the
same system. (Note that you'll be able to install the final version of XP on only one machine,
as opposed to the current beta, which can be installed on five machines for testing
purposes.) The second stage creates a profile of the system to prevent you from reinstalling
or registering the OS on different PCs.
To make this scheme work, you must activate your copy of Windows--over the Internet or by
calling for an activation code--within 30 days of installation. Activation differs from a classic
registration process in that no personal information is requested by or sent to Microsoft, just
a record that a specific copy of Windows XP is installed on your specific PC. If you fail to
activate your copy of the OS within 30 days, your login will fail. (Since XP is based on
Windows NT-like privilege levels, you can't use your computer until you log on.)
Microsoft says the scheme should not prevent you from reinstalling your copy of XP on your
PC as many times as you need to, as long as it's the same PC or close to it, allowing for
some hardware changes. It's the "some" that has most folks worried. In theory, you might
have to reactivate your OS if you upgrade significantly or swap out a lot of components
because XP might think it's running on a new PC. So far, Microsoft isn't saying what system
information the OS uses to determine the "same PC or close to it" status. That means we
don't know to what degree you can upgrade your hardware before you cross the invisible
line. We also don't know how much, if any, personally identifiable data Microsoft is gathering
from your PC.
Microsoft says you can, of course, change at least one and possibly several hardware
components--RAM, video or sound cards, CPUs, motherboards, and so on--without having to
reactivate your OS. But if you try to reinstall your copy of Windows XP on what Microsoft
calls a "different or significantly upgraded or changed PC" (again, the company declined to
specify how different), the activation will most likely be rejected, requiring you to call
Microsoft to explain and get a new (free) activation code.
Microsoft plans to set up a new call center for U.S.-based customers to expedite activation
issues. Many non-U.S. customers will likely have to go through the existing, shared Microsoft
technical support lines they currently use. Microsoft says it expects only 2 percent of the
total installed base of Windows XP to have to reactivate the OS. Whether the anti-piracy
initiative will present problems for consumers or result in fewer upgrades to XP remains to be
As you may have heard, Microsoft has also made Passport available to Web developers, so if
any Webmaster wants his or her site to have a built-in ID system, there's no need to reinvent
the wheel. To put Passport on your site, you must install Passport Manager software on your
Web server. For more information on how to Passport-enable your site, check out this
Business Services page. One of the benefits of online authentication systems such as
Passport is that they save Net businesses from the expense and hassle of creating their own
ID schemes. Currently, Microsoft is waiving licensing fees for businesses, though it plans to
charge a "nominal" annual fee in the future.
What is .Net, and how is Passport related to it?
Microsoft .Net is Microsoft's platform for delivering Web services to a variety of Internetconnected devices (such as handhelds and phones), regardless of programming language or
operating system, including Mac, Linux, and Windows. In theory, .Net will allow different
applications on different platforms to communicate and share data over the Internet. It's the
foundation of Microsoft's software-as-services business model. (The Redmond company
ultimately plans to charge subscription fees for the use of its applications.) Windows XP
features the first batch of .Net services, including Windows Messenger, Web Publishing
Wizard, and the Online Print Ordering Wizard (for purchasing paper prints of digital photos).
Passport is the authentication system for .Net, so you'll need a Passport account to use
future and current .Net services.
Will Passport help Microsoft monopolize the Internet?
Microsoft already dominates the PC software market, from operating systems to browsers to
office suites. But it's too early to say who will control the online authentication market.
Passport isn't the only player in the online ID game. Liberty Alliance, a consortium led by Sun
Microsystems, General Motors, Fidelity Investments, and other industry titans, plans to
launch a competing service. However, it's unclear when this service will be ready or even
what its name will be. So far, Passport is the best-developed online authentication scheme.
In any event, once the competing Net ID systems are available, Microsoft claims that
Passport will be interoperable with them, similar to the way banks and their respective ATMs
share financial information.
What's all the hoopla about Passport and security?
In the wake of two recent, well-publicized security breaches involving Hotmail and Microsoft's
Internet Information Server, some analysts and privacy advocates question Microsoft's ability
to ensure customer security. Microsoft is also a popular target among unscrupulous hackers,
who are constantly trying to find holes in various Microsoft programs.
To be fair, Microsoft does as much as any other company to protect your data from hackers
and thieves. According to the company, your information is stored on secure servers in a
controlled environment, safe from hackers and physical intruders. When you log in to or buy
something from a Passport-enabled site, the server sends your billing and contact
information in encrypted form (using the Triple DES encryption). Still, potential Passport
customers should consider these security issues before signing up--or deciding not to.
Will anyone sell my Passport information?
Security aside, privacy groups such as the Electronic Privacy Information Center are
apprehensive about Microsoft's and other Passport participants' plans for your data. For
example, once you start using your Passport account, will vendors track your Net activities
and purchases? Will they sell your personal data to marketers? Microsoft says they won't.
Passport's privacy policy lets you, the consumer, choose (during account setup) whether to
grant Microsoft the right to share your data with third parties. And Passport's architecture
doesn't allow Microsoft to see what you're buying online, according to Directions on Microsoft
analyst Matt Rosoff. Microsoft possesses only the information you surrendered at sign-up (email address, password, and so on). While Microsoft can share this information with its
Passport partners--such as when you sign on to a participating site--it can't share it with
other companies without your consent.
But what about Passport partner sites? Unfortunately, things get a little murky here. While
Microsoft insists that its partners must have privacy policies, it does not dictate the terms of
these policies. Microsoft "strongly encourages" Passport users to read its partners' privacy
policies before they log in to or share information with a partner site.
What's a Kids Passport?
Microsoft offers a Passport service for pups, but it's designed to keep your children safe while
they surf (rather than to get them shopping). Many Web sites customarily collect personal
information from visitors, regardless of age. But according to the Children's Online Privacy
Protection Act of 1998 (COPPA), commercial sites must obtain parental consent before
collecting, using, or disclosing personal information on anyone under 13. Microsoft's Kids
Passport service is designed to help enforce that rule.
The Kids Passport lets parents control what information their children share with Passport
sites. When your child tries to sign on to or share information with a Passport site, he or she
is denied access until approval is received from a parent. If you're in the same room as your
child, you can walk over to the PC and enter your Passport ID and password to allow her
access to, say, MSN.com. If you're at work, your child can e-mail you a request for
permission to enter the site. Kids Passport is free, but you will need to provide a credit card
number to set up an account. (Microsoft says it uses this information to verify your identity.)
Passport options
Can I use Passport if I don't have Windows?
Despite the Microsoft label, Passport isn't just for Windows. Whether you have a Mac, a Linux
machine, or a Unix box, you can sign up for Passport as long as you have a Web browser.
Can I pass on Passport and still buy stuff on the Web?
If you'd rather not shop the Microsoft way, don't panic. You don't need Passport to shop
online--well, not yet, anyway. Major retail Web sites such as Amazon.com and Kmart's
BlueLight.com have their own proprietary authentication systems. For instance, once you've
made a purchase at Amazon, the site stores your name, credit card number, and mailing
address in its own database. As frequent Amazon shoppers know, the next time you buy the
latest Harry Potter epic, your billing and payment information will appear automatically in the
appropriate fields (after you enter your password, of course). And, like Amazon, Passport
offers single-click shopping.
That said, however, you will need Passport to shop at many participating sites, such as
Starbucks.com. Some vendors, however, including Costco Online, accept Passport but also
allow you to register directly with the site without going through Passport.
Can I use Windows XP without Passport?
We've all heard rumors that Microsoft forces XP users to sign up for Passport. Well, we're
happy to report that it's not true. Neither XP's product activation nor its product registration
will automatically register you for the Passport service.
That doesn't mean XP is Passport-free. Some elements of the OS do require a Passport
account, including Windows Messenger, the built-in upgrade to Microsoft's MSN Messenger
chat program. (Of course, MSN Messenger also requires Passport, so it's not a major
change.)
Do I really need Passport?
If you regularly access Microsoft content sites, such as MSN or bCentral, or if you want to use
Hotmail, Windows Messenger, or even MSN Messenger, you will need a Passport account.
You'll also need one if you use Microsoft software and want access to online technical
support. But plenty of sites on the Web are still Passport-free.
When installing Windows XP from scratch, it prompts you to select from two different file
systems: FAT32 and NTFS. As expected, it gives no real reason why you should select one or
the other, and defaults to NTFS.
FAT32
If you're installing on a dual-boot system where you would have a FAT32 partition (default
type for Windows 98 and SE for partitions over 2GB), you may run into problems depending
on your situation. The FAT32 file system was created when the size of hard drives exceeded
2GB. The previous file system for DOS and Windows 95 was FAT16, which offered at most
2GB of allocation on your hard drive. This of course is useless for today's hard drives when
you can't find anything under 10GB anymore. Where FAT16 allowed a 2GB maximum, FAT32
only allows a 32GB maximum. If your hard drive is over 32GB, you'll have to split it into
separate partitions, or use NTFS.
NTFS
NTFS was introduced with Windows NT. Among the reasons why it was introduced, it allowed
partitions greater than what's even offered today, and boasts better performance and
security. Focusing on security, it's possible that while an NTFS hard drive is secure when
running Windows XP, there's no easy way to get back into the hard drive if you boot from an
emergency floppy that only sees a FAT16 or FAT32 partition, such as what you'd get from a
98 or ME emergency floppy. The security in NTFS actually prevents you from circumventing
its own file system from a boot floppy. This means that if for some reason your hard drive
becomes unusable and you need to move data off of it, the task won't be as easy as it was
when using Windows 95, 98, and ME. The solution that the user has in this situation is to
boot from the Windows XP CD and run a repair on the hard drive. This should fix any
problems the user had with the system and bring it back to a bootable state. The other issue
is in dual-boot situations. Running under NTFS, you can see FAT16 and FAT32 partitions, but
if you boot back into Windows ME, you can't see the NTFS partition. This is a problem if you
downloaded something to your XP partition and you want to move it to your ME partition
while running under ME. Also, if you upgraded ME to XP and you convert your file system
from FAT32 to NTFS, you cannot go back to Windows ME since ME can't run under NTFS.
However, only NTFS allows you to set permissions on individual folders so that you can
control who sees what.
Converting from FAT32 to NTFS at a later time
If you want, under Windows XP you can convert your FAT32 partition to NTFS using the
following command from your Command Prompt:
convert c: /fs:ntfs
Conclusion
With all this information, find what suits your needs and go with it. If you're the kind of
person that backs up regularly, go with NTFS. Same if you want to use a partition over 32GB
without partitioning. If you want to play it safe, or if you want the ability to transfer files from
one partition to another under a dual-boot situation, stick with FAT32. If you want to read
more about these file systems, Microsoft has an excellent article on their web site.
It's really handy to have access to the Volume Control panel in the event you quickly need to
move the volume slider up or down. In its default state, XP ships with almost a clean slate
for both the desktop and taskbar. So, if you'd like to place the volume control icon in the
taskbar, you're going to need to make a little adjustment.
To place the volume control icon in the taskbar, follow these steps:
You should now have the volume icon in the taskbar. Now all you need to do is double-click
this icon to bring up your Volume Control panel.
Make XP display a custom screen saver using your very own pictures
It used to be darn near impossible to create a personal screen saver using your own photo
collection. To do this, you had to track down a third-party application and sloppily piece
together your pictures to create a screen saver.
Well, the engineers at Microsoft must have realized they hated third-party applications and
decided enough was enough. XP can take any pictures stored in your "My Pictures" folder and
display them in random order as a screen saver.
If you happen to forget your password, all you need to do is click your user icon at the logon
screen. Even though you don't have your password, go ahead and click the green arrow just
like you would to finish logging on to your computer. This will launch a little yellow dialog box
directing you to use your password recovery disk.
XP Game Compatibility
You want to know if all your favorite games are still going to run under Windows XP.
Remember what happened when we tried to run games on our Windows 2000 machines?
Sometimes we were a little disappointed. Windows 2000 was made more for corporate
applications than "Quake," but true techno-geeks know they don't have to sacrifice death
matches for a robust business environment -- at least not anymore.
Windows XP has shown an impressive track record of game compatibility. We ran a number
of standard games, such as "Tiger Woods Golf," "NHL 2001," "Max Payne," and "Unreal" on
our Windows XP Professional machine. Some of these games were specifically slated for
Windows 95 and 98, and were shown not to work in Windows 2000. The installation in XP
was as smooth as silk. The games ran quickly and beautifully -- not a problem in sight
(except for my bad chip shot -- Tiger was hanging his head in shame).
Some less-sophisticated programs may not run as smoothly, and we found that some older
applications, such as the Atari 2600 Classic Game Collection, did not appreciate the Windows
XP environment. In this case you can use the Application Compatibility Wizard, found in the
accessories menu. XP includes integrated compatibility layers to mimic older versions of
Windows, so if your program does not work in Windows XP, the compatibility wizard will walk
you through the process of getting even your favorite DOS games up and running. In this
case, we ran the Atari Classic Game Collection in the Windows 95 environment, at 256 colors
and 640x480 screen resolution. Then we set XP to always run our Atari application in this
environment, and everything was smooth sailing after that.
One final tip about compatibility: Don't run the compatibility wizard if your program appears
to be running well in the normal environment, as the wizard will give you an error message.
In general, XP has great program compatibility, so you can upgrade your operating system
without giving up all your old favorites.
Choose to format the partition to either FAT32 or NTFS (recommended for single OS install).
You'll also see two additional choices to perform a quick format of each option. Stick with
doing a full format of either option instead. After you've determined which option is right for
you, press the correct key to format the partition.
This would be a good time to take a break and come back in a few minutes. The setup
program will automatically start copying files after the partition is formatted.
From this point on, you're going to see each and every file name that's being copied over to
your hard drive appear in the lower left corner. As the file names go from A to Z, the
installation completion percentage will increase.
The setup process is similar for new installations and upgrades with
a few notable exceptions. For example, during a new installation,
you are able to configure Special Options, convert your file system,
and create a new partition for the Windows XP installation.
IMPORTANT
A new installation deletes all programs or system files from a
previous installation.
Special Options
Under Special Options, you have the choice to change Language,
Advanced, and Accessibility settings during the setup process.
Note: If you are in a country that has recently adopted the euro as
its currency, you may have to modify the currency settings to
display monetary amounts correctly.
For more information, go to Help and Support Center and type
euro in the Search box.
Select
Language
keyboard layout.
Advanced
Options
IMPORTANT
Unless you're an advanced user, it's recommended that you use the
default settings.
IMPORTANT
You can convert your file system any time, even after you install
Windows XP, without losing any of your data.
The conversion to NTFS is oneway only; if you convert your FAT or
FAT32 file system to NTFS you cant convert your hard disk back to
FAT later.
If youre not sure which file system to use, keep the one your
computer defaults to during Setup. If you want to change your file
system, here are a few recommendations:
Microsoft provides a Knowledge Base article, but reading it is like walking through molasses:
It describes in infinite detail a file security system based on a 1-to-5 scale. However, if you
look for this 1-to-5 scale anywhere in your security-settings interface, you may come away a
little confused. These numbers are nowhere to be found.
Microsoft's 1-to-5 scale means nothing to the individual user and relates in no way to the
actual practice of setting your security protocols. Enter the Screen Savers. We are here to
explain it to you.
The security settings the user actually sets relate to read access, write access, shared
folders, and password protection. These features are available in both Windows XP Home
Edition and Windows XP Professional, however the features only work if the operating system
is installed with NTFS. FAT32 does not support the file permissions described here.
You can choose to install Windows XP Home using NTFS, but you should use a FAT32 file
system if you are dual booting and want to see the contents of your Windows 95, 98, or Me
partition from your XP partition. Your file system is not set in stone when you install Windows
XP. You always can change your file system from FAT32 to NTFS without losing any of your
data; however, the transition is one-way only.
There is no going back to FAT32 from NTFS unless you grab a copy of Partition Magic.
Microsoft recommends you install Windows XP Home with FAT32 if you intend to install more
than one OS on your computer or if your hard drive is less than 32GB.
If you have Windows XP Home or Professional running NTFS, you can hide files and entire
folders from prying eyes. When you set up multiple user accounts on one machine, any user
with administrator access can view the documents in another's My Documents folders. To
protect a folder, right-click it, choose Properties, the Share tab, and select "make this folder
private." No one, not even a fellow system administrator, can access these most secret files.
Every file or folder contained within whichever folder you choose to make private will take on
the settings of the parent folder. If the administrator does not have a password to the
account, Windows XP will prompt the user to make a password or risk subjecting his or her
private work to public scrutiny. No Windows password means no protected files.
A person who logs in as a guest or as a user without administrator privileges cannot see the
contents of any other user's My Documents folder, even if the folder has not been explicitly
made private. The user with limited privileges can, however, set a password and protect his
or her documents from the prying eyes of the administrators. Windows XP is all about
privacy.
It is a nice feeling to keep your personal tax documents secure from the passing lookey-loo.
It's about time Microsoft made snooping your computer more difficult than snooping your
medicine cabinet.