Académique Documents
Professionnel Documents
Culture Documents
GSIs bucket elevators & conveyors are engineered to perform and built tough to
provide years of reliable service. Whether your business is industrial or agricultural,
whether your requirements are for receiving or unloading, pre-processing or post
processing, count on GSI for your material handling needs.
GSIs line of bucket elevators are highly corrosion resistant and made with either a
galvanized finish or a powder coat finish for lasting durability and superior appearance.
elevator head features include...
Two piece hood for interior accessibility.
Full radius contoured hood to minimize wear and improve material discharge flow.
Pressure relief panels (large service doors are located on both sides of the hood 42 (1066 mm) models and larger.)
Machined, UHMW shaft seals.
Heavy-duty, crowned face, double disc drum pulley with SOFR (static conductive,
oil resistant & fire retardant) lagging.
Weather tight internal lip seal between head housing and hood to eliminate
moisture problems.
Bearing plates with vertical jack bolts for final installation alignment.
Fully adjustable throat plate.
Hinged pulley lagging service doors on both sides of the head housing.
See page 10-11 for Specifications
Electronic Distributors
The GSI electronic distributor is the most advanced and user friendly distributor
controller on the market. With an industry leading touch screen display, moving
spout locations is made easy. With a 6 color screen, one can visually determine
the spout position with just a glance. The controller is powered by a PLC with
the ability to easily customize text and lock out specific spout numbers. The
system uses cutting edge electronic components and an efficient and compact
drive configuration that assures high reliability in even the toughest conditions.
When using the GSI electronic distributor controller, one can easily integrate the
PLC control into a larger grain network. A user can control the desired spout
position from another PLC while the GSI system is responsible for moving and
reporting the spout position. There are multiple protocol options for integrating
an external controller, including Ethernet and serial.
These features provide the end user with a reliable and easy-to-operate unit for
any GSI brand distributor, new or existing.
Features:
Intuitive controls and menus.
Multiple protocols available.
Industry leading HMI touch screen controls.
Ability to interface with main farm/elevator network.
Exceptional graphics with the ability to customize text.
Weather proof controls (NEMA 4 rated).
UL and UL-C listed for use in US and Canada.
Direct drive configuration.
High torque, 400:1 reduction with hp 3-phase motor.
Rotary position sensor for accurate positioning.
Retrofits to any existing GSI distributor.
Distributors
Distributor Features:
3/16 and 12 gauge body parts. Outlets flanged.
Located under the distributor is the positive locking stainless
steel index plate which offers protection from dust and harsh
weather conditions.
Large throat on internal swing spout, bottom lined with 1/4
urethane for extended wear.
Swing spout turns on a 1 1/2 ball bearing, heavy-duty shaft
connects to cable control.
Hinged door for
convenient access
Bolted internal
design for easy
replacement
Hot dipped
galvanized
body
Brush equipped
swing spout
to reduce dust
buildup
Stainless steel
precise locking index plate
Page 3
boots
Optional gravity
take-up available
on 36 (914.4mm),
42 (1066.8mm),
& 48 (1219.2mm)
elevators only
Trunking
Powder coated 12 gauge (2.65mm) steel construction and
heavy-duty 10 gauge (3.41mm) steel with continuous butt weld
seams to reduce corrosion from moisture and dust accumulation.
Galvanized 14 gauge (1.9mm) steel bolted construction.
Fixture welded, structural angle iron flanges are continuously
welded on the outside and stitch welded on the inside.
Maintenance friendly 10 (3048mm) inspection section with
9 (2743.2mm) long opening at both front and back. Front and
back panels can be removed in 3 (914.4mm) increments. The
inspection door can be located in 6 different locations for
ultimate flexibility.
Unique bolted tie angle design provides rigidity, squareness to
trunking and is independent of flange bolts.
Durable, SOFR (static conductive, oil resistant & fire retardant)
rubber belting.
Unique bolted tie
angle design
14 (355.6mm),
Tall En-Masse Conveyors &1220(304.8mm),
(508mm)
GSI 12 (304.8mm), 14 (355.6mm), and 20 (508mm) En-Masse conveyors offer many features to maximize performance and
reduce operation costs. For larger grain capacity requirements, GSI offers a 26 (660.4mm) and 32 (812.8 mm) En-Masse
Conveyor. These conveyors feature an extra heavy-duty construction, easy access to all vital hardware and a powder coated
finish for lasting durability. All of GSIs conveyors are highly corrosion resistant and come standard with a powder coat finish for
lasting durability and superior appearance.
Tail Section
Extended mount flange bearings on 12 (304.8) and 14 (355.6mm) tall conveyors.
External mount pillow block bearings on 20 (508mm) tall conveyors.
Heavy duty chain tension take-up system utilizing corrosion resistant acme
threaded screws.
Flame cut hardened steel sprockets. Split hubs available
Maintenance friendly, bolted access to allow removal of the shaft, sprocket, and
bearings as an assembly.
10 gauge (3.41mm) housing on 12 (304.8mm) and 14 (355.6mm) conveyors,
7 gauge (4.55mm) on 20 (508mm) conveyors.
Tail shafts are turned ground and polished.
Head Section
Extended mount flange bearings on 12 (304.8mm) and 14 (355.6mm) tall conveyors.
External mount pillow block bearings on 20 (508mm) tall conveyors.
Machined 1/4 (6.35mm) thick UHMW shaft seals.
Flame cut hardened steel sprockets. Split hubs available
Maintenance friendly, bolted access to allow removal of the shaft, sprocket, and
bearings as an assembly.
10 gauge (3.41mm) housing on 12 (304.8mm) and 14 (355.6mm) conveyors,
7 gauge (4.55mm) on 20 (508mm) conveyors.
Head shafts are turned ground and polished.
Trough Section Features
Dust and weather tight, heavy gauge, peaked covers on head, tail and intermediate trough.
Abrasion resistant steel wear liners with recessed fasteners for removal or replacement.
Bolted removable bottom construction.
Standard 10 gauge (3.41mm) intermediate trough sides.
Trough sections are fixture assembled for accurate alignment and ease of installation.
Trough sections are flanged with structural angle to provide rigidity and accurate alignment.
Standard roller chain engineered for each specific conveyor to maximize working load and expected life.
UHMW flights prevent steel to steel contact.
UHMW return rollers with shafts bolted to trough for easy maintenance and replacement are standard
on 12 (304.8mm) to 14 (355.6mm) tall conveyors.
Rail returns are standard on all 20 (508mm) tall conveyors. Rails are lined with 1/4 (6.35mm)
abrasion resistant steel and tapered end to end to minimize flight wear and maximize
cleaning. Rails overlap at flange connections for smooth operation.
26 (660.4mm)
& 32 (812.8mm)
En-Masse Conveyor standard features and
options include...
6 (152.4mm) pitch welded steel chain
with v-cup flight attachments and factory
mounted paddles.
Abrasion resistant steel wear liners
with recessed fasteners for removal or
replacement.
Slack chain switch.
Hinged head relief door with limit switch
standard.
Head and tail housing split for shaft and
sprocket removal.
Standard split sprockets
Page 6
Head Section
16 (406.4mm) diameter slide lagged pulley, XT Bushing and hubs - 2 (50.8mm) wider
than belt.
24 (609.6mm) diameter slide lagged pulley with 10 (254mm) diameter snubber pulley on
longer lengths of conveyors XT bushing and hubs - 2 (50.8mm) wider than belt.
10 ga. (3.41mm) reinforced housing.
12 ga. (2.65mm) slide-off hood, 1/4 (6.35mm) urethane lined front radius, door for plug switch
in side of hood.
Shafting of 1045 turned ground and polished steel.
Dodge Imperial 2000 series pillow block bearings with triple lip Trident seal, adapter lock collar
and replaceable bearing insert, jack screws with shims for belt alignment.
Tail Section
14 (355.6mm) spiral wing type pulley with reloading rubber flippers at each end.
Plow assembly between belts to move spilled material to side reloaders. Adjustable with
replaceable skirting.
18 (457.2mm), 24 (609.6mm), 36 (914.4mm) and 48 (1219.2mm) manual take-up with acme
threads on take-up screws.
Dodge Imperial 2000 series pillow block bearings with triple lip Trident seal, adapter lock collar
and replaceable bearing insert, jack screws with shims for belt alignment.
Shafting of 1045 turned ground and polished steel.
3/16 (4.76mm) thick take-up housing.
Quick-detach or swing-up tail shroud for access to pulley (see below).
Intermediate Section...
Anti-static UHMW bottom liners, 1/4 (6.35mm) thick, bolted in slots to allow for
thermal expansion.
10-0 (3.05m) Intermediate sections with 5-0 (1.52m) clamp-on covers.
45 Idler Rollers on 5-0 (1.52m) centers with 1-3/8 dia. removable stub shafts, shouldered to
1-1/4 (31.75mm) dia. for idler roller alignment.
Dodge 1-1/4 (31.75mm) dia. 2 bolt SC ball bearings, 207 series.
12 ga. (2.65mm) housing, 26 (660.4mm) tall with 2 (50.8mm) flange joints.
Inspection doors at intermediate section next to head and tail section.
Options
1/2 (12.7mm)UHMW
Bottom Liner
Heavy Idler
Assemblies
Low Profile Heads
Low Profile Loaders
Clean-out Inlets
Ceramic Tile and
other liner options
Page 7
Hi-Flight Conveyors
GSI manufactures a complete line of Hi-Flight conveyors designed and
engineered to minimize the length of delivery time. Hi-Flights are
available in 12 (304.8mm), 14 (355.6mm), 20 (508mm), 27 (685.8mm),
and 39 (990.6mm) sizes. These conveyors feature an extra heavy-duty
construction and ease of access to all vital hardware. All GSI conveyors
are highly corrosion resistant and come standard with powder coat
finish for lasting durability and superior appearance.
Tail Section
Externally mounted pillow block bearings are standard on all sizes.
Heavy duty chain tension take-up system utilizing corrosion resistant
acme threaded screws.
Flame cut hardened steel sprockets. Split hubs available.
Maintenance friendly, slit housings to allow removal of the shaft,
sprocket, and bearings as an assembly.
10 gauge (3.41mm) housing on 12 (304.8mm)
and 14 (355.6mm) conveyors,
7 gauge (4.55mm) on 20 (508mm) and 27 (685.8mm) conveyors,
plate on 39 (990.6mm) conveyors.
Tail shafts are turned ground and polished.
Machined (6.35mm) thick UHMW shaft seals.
Head Section
Externally mounted pillow block bearings are standard on all sizes.
Flame cut hardened steel sprockets. Split hubs available.
Maintenance friendly slit housings to allow removal of the shaft, sprocket, and
bearings as an assembly.
10 gauge (3.41mm) housing on 12 (304.8mm) and 14 (355.6mm) conveyors,
7 gauge (4.55mm) on 20 (508mm) and 27 (685.8mm) conveyors,
plate on 39 (990.6mm) conveyors.
Head shafts are turned ground and polished.
Machined (6.35mm) thick UHMW shaft seals.
Page 9
Pulley
size
BPH
CFH
MTH
38-76
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
S
T
U
V
W
X
Y
Z
34
60
14
10
16
36
29
58
65
12
12
16
35
14
10
21
30
49
39
52
122
47
47
112
Pulley
size
BPH
CFH
MTH
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
S
24
30005600
37507000
102142
42
60
22
10
16
36
33
66
69
12
12
16
42
16
13
26
30
41
39
52
122
47
47
112
30
36
42
H
HEAD HOOD
42
Pulley
size
48
REDUCER AND/OR
MOTOR MOUNT
CFH
STANDARD
TRUNKING
40000
50000
1020
67
72
39
14
50
58.5
60
108
118.5
19
22
50
62
24
42
38
50
25000
31250
637
73
72
45
14
38
58.5
60
120
118.5
23
24
38
69
28
30
41
62
30000
37500
765
73
72
45
14
42
58.5
60
120
118.5
23
24
42
69
28
34
41
62
42 (1066.8mm)
- 48 (1219.2mm)
Head / Boot Shown
40000
50000
1020
73
72
45
14
50
58.5
60
120
118.5
23
24
50
69
28
42
41
62
864
1524
356
254
406
914
737
1473
1651
305
305
406
889
356
254
533
762
1244
990
1320
3098
1194
1194
2845
10 - 0 (TYPICAL)
(3048mm)
INSPECTION
SECTION
38-76
D x E TRUNKING
(TYPICAL)
10 - 0 (TYPICAL)
(3048mm)
N x O BOOT INLET
HOPPER (TYPICAL)
(OPTIONAL DOWN-LEG
HOPPER SHOWN)
M - LESS 6 (152.4mm)
762
914
1066
1066
1219
1400020000
1750025000
356510
1854
1829
1143
356
660
1486
1524
3048
3010
584
610
660
1753
711
457
1041
1575
2184
1321
1473
5385
1092
1702
3556
B
M
610
30005600
37507000
102142
1067
1524
559
254
406
914
838
1676
1753
305
305
406
1067
406
330
660
762
1041
990
1320
3098
1194
1194
2845
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
S
T
U
V
W
X
Y
Z
KxL
DISCHARGE SPOUT
406
15003000
18753750
MTH
LOWER
HEAD
HOUSING
BPH
BOOT SECTION
A
Z
X
Pulley
1066 1066 1066
size
BPH 25000 30000 40000
CFH 31250 37500 50000
MTH
637
765 1020
A
1702 1702 1702
B
1829 1829 1829
C
991
991
991
D
356
356
356
E
965 1067 1270
F
1486 1486 1486
G
1524 1524 1524
H
2743 2743 2743
I
3010 3010 3010
J
483
483
483
K
559
559
559
L
965 1067 1270
M
1575 1575 1575
N
610
610
610
O
762
914 1067
P
965
965
965
S
1270 1270 1270
1219
1219
1219
25000
31250
637
1854
1829
1143
356
965
1486
1524
3048
3010
584
610
965
1753
711
762
1041
1575
30000
37500
765
1854
1829
1143
356
1067
1486
1524
3048
3010
584
610
1067
1753
711
864
1041
1575
40000
50000
1020
1854
1829
1143
356
1270
1486
1524
3048
3010
584
610
1270
1753
711
1067
1041
1575
Page 10
50000
62500
1267
73
72
45
14
60
58.5
60
120
118.5
23
24
60
69
28
52
41
62
50000
62500
1267
76
84
44
16
72
58.5
60
123
118.5
23
24
72
81
28
64
51
62
60000
75000
1520
76
84
44
16
72
58.5
60
123
118.5
23
24
72
81
28
64
51
62
BPH
CFH
1500
2000
2500
3000
3000
4000
5000
5600
5000
6000
7000
5000
6000
7000
7500
8000
10,000
8000
10,000
12,000
14,000
15,000
20,000
14,000
15,000
16,000
20,000
25,000
30,000
40,000
25,000
30,000
40,000
40,000
50,000
50,000
60,000
1875
2500
3125
3750
3750
5000
6250
7000
6250
7500
8750
6250
7500
8750
9375
10,000
12,500
10,000
12,500
15,000
17,500
18,750
25,000
17,500
18,750
20,000
25,000
31,250
37,500
50,000
31,250
37,500
50,000
50,000
62,500
62,500
75,000
Color Guide
Powder Coated or Galvanized
Powder Coated Only
FPM
38
51
63
76
76
101
127
142
127
152
177
127
152
177
191
204
255
204
255
306
355
382
510
355
382
405
510
637
760
1013
637
760
1013
1013
1267
1267
1520
423
423
423
423
478
478
478
478
544
544
544
620
620
620
620
620
620
675
675
675
675
675
675
720
720
720
720
675
675
675
720
720
720
720
720
720
720
16
16
16
16
24
24
24
24
30
30
30
36
36
36
36
36
36
42
42
42
42
42
42
48
48
48
48
42
42
42
48
48
48
48
48
48
48
95
95
95
95
73
73
73
73
67
67
67
64
64
64
64
64
64
60
60
60
60
60
60
56
56
56
56
60
60
60
56
56
56
56
56
56
56
Bucket
Bucket
Size
Spacing
9X5
9
9X5
7
9X6
8
9X6
6.5
10 X 6
8
11 X 6
7
11 X 6 Lp
5.5
11 X 6 Lp
5
13 X 6
8
13 X 7
9
13 X 7
8
12 X 6
8
11 X 7
8.5
13 X 7
9
13 X 7
8.5
13 X 7
8
13 X 7 Lp
6
14 X 7
9
14 X 8
10
16 X 8
10
16 X 8
9
16 X 8 Lp
7.5
20 X 8 Lp
7
16 X 8
9.5
18 X 8
9.5
18 X 8
9
20 X 8 Lp
7.5
(2) 14 X 8 Lp
7.5
(2) 16 X 8 Lp
7.5
(2) 20 X 8 Lp
7
(2) 14 X 8
9
(2) 16 X 8
9
(2) 20 X 8 Lp
7.5
(3) 16 X 8
9.5
(3) 16 X 8
7
(3) 20 X 8
9.5
(3) 20 X 8 Lp
7.5
MODEL
15P16/15G16
20P16/20G16
25P16/25G16
30P16/30G16
30P24/30G24
40P24/40G24
50P24/50G24
56P24/56G24
50P30/50G30
60P30/60G30
70P30/70G30
50P36/50G36
60P36/60G36
70P36/70G36
75P36/75G36
80P36/80G36
100P36/100G36
80P42/80G42
100P42/100G42
120P42/120G42
140P42/140G42
150P42/150G42
200P42/200G42
140P48/140G48
150P48/150G48
160P48/160G48
200P48/200G48
250P42
300P42
400P42
250P48
300P48
400P48
400P48
500P48
500P48
600P48
BPH
CFH
1500
2000
2500
3000
3000
4000
5000
5600
5000
6000
7000
5000
6000
7000
7500
8000
10,000
8000
10,000
12,000
14,000
15,000
20,000
14,000
15,000
16,000
20,000
25,000
30,000
40,000
25,000
30,000
40,000
40,000
50,000
50,000
60,000
1875
2500
3125
3750
3750
5000
6250
7000
6250
7500
8750
6250
7500
8750
9375
10,000
12,500
10,000
12,500
15,000
17,500
18,750
25,000
17,500
18,750
20,000
25,000
31,250
37,500
50,000
31,250
37,500
50,000
50,000
62,500
62,500
75,000
16
16
16
16
24
24
24
24
30
30
30
36
36
36
36
36
36
42
42
42
42
42
42
48
48
48
48
42
42
42
48
48
48
48
48
48
48
95
95
95
95
73
73
73
73
67
67
67
64
64
64
64
64
64
60
60
60
60
60
60
56
56
56
56
60
60
60
56
56
56
56
56
56
56
2.15
2.15
2.15
2.15
2.43
2.43
2.43
2.43
2.76
2.76
2.76
3.15
3.15
3.15
3.15
3.15
3.15
3.43
3.43
3.43
3.43
3.43
3.43
3.65
3.65
3.65
3.65
3.43
3.43
3.43
3.65
3.65
3.65
3.65
3.65
3.65
3.65
Bucket
Bucket Trunking
Size
Spacing
Size
228 X 127
228
254 X 406
228 X 127
178
254 X 406
228 X 153
203
254 X 406
228 X 153
166
254 X 406
254 X 153
203
254 X 406
279 X 153
178
254 X 406
279 X 153
140
254 X 406
279 X 153
127
254 X 406
330 X 153
203
304 X 457
330 X 178
228
304 X 457
330 X 178
203
304 X 457
305 X 153
203
304 X 457
279 X 178
216
304 X 457
330 X 178
228
304 X 457
330 X 178
216
304 X 457
330 X 178
203
304 X 457
330 X 178
153
304 X 457
355 X 178
228
355 X 558
355 X 203
254
355 X 558
406 X 203
254
355 X 558
406 X 203
228
355 X 558
406 X 203
191
355 X 558
508 X 203
178
355 X 660
406 X 203
241
355 X 660
457 X 203
241
355 X 660
457 X 203
228
355 X 660
508 X 203
191
355 X 660
(2) 355 X 203
191
355 X 965
(2) 406 X 203
191
355 X 1066
(2) 508 X 203
178
355 X 1270
(2) 355 X 203
228
355 X 965
(2) 406 X 203
228
355 X 1066
(2) 508 X 203
191
355 X 1270
(3) 406 X 203
241
355 X 1524
(3) 406 X 203
178
355 X 1524
(3) 508 X 203
241
406 X 1829
(3) 508 X 203
191
406 X 1829
Capacities based on dry, free flowing, granular material with proper loading and unloading conditions at 45#/CF.
(721kg/m3) using conservative cup capacities per manufacturers recommendations.
The raw material gauge specifications refer to hot rolled steel. For galvanized steel requirements the specifications are
identical, except 8 Ga. (4.26mm) galvanized steel replaces 7 Ga. (4.55mm) hot rolled steel.
General specifications and dimensions are subject to change without notice.
General specifications and dimensions are intended to provide sales assistance and preliminary guide to system layout only.
Specifications Distributors
A
6
10
12
14
Outlets
4 Hole
6 Hole
8 Hole
6 Hole
8 Hole
10 Hole
6 Hole
8 Hole
10 Hole
4 Hole
6 Hole
8 Hole
10 Hole
4 Hole
6 Hole
8 Hole
B
9-7/16
11-3/32
10-3/32
11-1/8
12-1/8
12-1/8
12-1/8
12-1/8
12-1/8
13-1/8
13-1/8
12-1/8
13-3/32
14-31/32
15
12-1/8
C
21-13/16
21-13/16
27-21/32
21-13/16
26-7/8
34-5/8
26-1/16
29-13/16
40-3/8
28-1/8
28-1/8
35-1/16
44-1/16
32-29/32
32-29/32
40-5/16
D
30-21/32
30-9/16
35-1/32
30-5/8
35-11/16
43-3/8
33-1/8
36-15/16
47-1/2
34-13/16
34-13/16
41-3/4
51-17/32
47-7/16
46-27/32
48-7/8
E
42-9/16
16
42-9/16
15-31/32
15-15/16
53-5/32
15-15/16
15-15/16
24-3/4
59-5/16
15-15/16
15-15/16
29-3/16
67-27/32
15-15/16
F
50-19/32
46-3/8
56-3/16
15-1/4
66-13/16
61-7/8
73-15/16
70-11/16
G
2-3/16
3-3/16
10-7/16
11-7/16
14-11/16
11
16-13/32
14-1/4
A (mm)
152.4
203.2
254.0
304.8
355.6
Outlets
4 Hole
6 Hole
8 Hole
6 Hole
8 Hole
10 Hole
6 Hole
8 Hole
10 Hole
4 Hole
6 Hole
8 Hole
10 Hole
4 Hole
6 Hole
8 Hole
B (mm)
239.7
281.8
256.4
282.6
308.0
308.0
308.0
308.0
308.0
333.4
333.4
308.0
332.6
380.2
381.0
308.0
C (mm)
554.0
554.0
702.5
554.0
682.6
879.5
662.0
757.2
1025.5
714.4
714.4
890.6
1119.2
835.8
835.8
1023.9
D (mm)
778.7
776.3
889.8
777.9
906.5
1101.7
841.4
938.2
1206.5
884.2
884.2
1060.5
1308.9
1204.9
1189.8
1241.4
E (mm)
1081.1
406.4
1081.1
405.6
404.8
1350.2
404.8
404.8
628.7
1506.5
404.8
404.8
741.4
1723.2
404.8
F (mm)
1285.1
923.9
1427.2
387.4
1697.0
1571.6
1878.0
1795.5
G (mm)
55.6
81.0
265.1
290.5
373.1
279.4
416.7
362.0
Page 11
Specifications
12 (304.8mm), 14 (355.6mm),
20 (508mm) En-Masse Conveyors
100*
110*
120*
130*
2100
2310
2520
2730
2800
3080
3360
3640
3700
4070
4440
4810
4500
4950
5400
5850
5950
6545
7140
7735
6500
7150
7800
8450
7450
8195
8940
9685
9300 10230 11160 12090
12100 13310 14520 15730
14200 15620 17040 18460
140*
2940
3920
5180
6300
8330
9100
10430
13020
16940
19880
150*
3150
4200
5550
6750
8925
9750
11175
13950
18150
21300
160*
3360
4480
5920
7200
9520
10400
11920
14880
19360
22720
170*
3570
4760
6290
7650
10115
11050
12665
15810
20570
24140
180*
3780
5040
6660
8100
10710
11700
13410
16740
21780
25560
H
24
24
24
24
24
24
24
24
24
24
I
9
12
16
16
21
14
16
20
26
32
L
20.75
22.25
24.25
26.25
28.75
31
32
34
37
40
M
30
30
30
30
30
30
30
30
30
30
N
21
24
28
28
33
34
36
40
46
52.25
Size (W x H)
228.6 x 304.8
304.8 x 304.8
406.4 x 304.8
406.4 x 355.6
533.4 x 355.6
355.6 x 508.0
406.4 x 508.0
508.0 x 508.0
660.4 x 508.0
812.8 x 508.0
1
0.5
0.7
0.9
1.1
1.5
1.7
1.9
2.4
3.1
3.6
100
53.6
71.4
94.4
114.8
151.7
165.8
190.0
237.2
308.6
362.1
110
58.9
78.5
103.8
126.2
166.9
182.3
209.0
260.9
339.4
398.3
120
64.3
85.7
113.2
137.7
182.1
198.9
228.0
284.6
370.3
434.5
Size (W x H)
228.6 x 304.8
304.8 x 304.8
406.4 x 304.8
406.4 x 355.6
533.4 x 355.6
355.6 x 508.0
406.4 x 508.0
508.0 x 508.0
660.4 x 508.0
812.8 x 508.0
A
228.6
304.8
406.4
406.4
533.4
355.6
406.4
508.0
660.4
812.8
B
304.8
304.8
304.8
355.6
355.6
508.0
508.0
508.0
508.0
508.0
160
85.7
114.2
151.0
183.6
242.8
265.2
304.0
379.4
493.7
579.4
C
325.1
401.3
502.9
502.9
629.9
477.5
528.3
629.9
782.3
934.7
D
381.0
381.0
381.0
431.8
431.8
584.2
584.2
584.2
584.2
584.2
E
609.6
609.6
609.6
762.0
762.0
914.4
914.4
914.4
914.4
914.4
F
304.8
304.8
304.8
355.6
355.6
508.0
508.0
508.0
508.0
508.0
G
609.6
609.6
609.6
609.6
609.6
762.0
762.0
762.0
762.0
762.0
H
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
I
228.6
304.8
406.4
406.4
533.4
355.6
406.4
508.0
660.4
812.8
L
527.1
565.2
616.0
666.8
730.3
787.4
812.8
863.6
939.8
1016.0
INTERMEDIATE
CROSS SECTION
5 Bend
(Minimum)
10 Bend
E
HEAD SECTION
TAIL SECTION
15 Bend
(Maximum)
General Notes:
Capacities based on dry, free flowing, granular material conveyed horizontally with proper loading and discharging
conditions at 45#/CF. (721 kg/m3). Capacities based on using top load inlets. Bypass inlets will reduce capacity.
Consult inside sales. General specifications and dimensions are subject to change without notice. General specifications
and dimensions are intended to provide sales assistance and a preliminary guide to system layout only.
10 BEND
5 BEND
1.319
1.319
1.319
1.319
1.319
1.45
1.45
1.45
1.45
1.45
30.218
30.218
30.218
30.218
30.218
33.35
33.35
33.35
33.35
33.35
71.87
71.87
71.87
71.87
71.87
107.87
107.87
107.87
107.87
107.87
3.175
3.175
3.175
3.175
3.175
3.54
3.54
3.54
3.54
3.54
36.297
36.297
36.297
36.297
36.297
40.465
40.465
40.465
40.465
40.465
71.87
71.87
71.87
71.87
71.87
107.87
107.87
107.87
107.87
107.87
5.554
5.554
5.554
5.554
5.554
6.78
6.78
6.78
6.78
6.78
42.192
42.192
42.192
42.192
42.192
51.50
51.50
51.50
51.50
51.50
71.87
71.87
71.87
71.87
71.87
107.87
107.87
107.87
107.87
107.87
C
44.63
44.63
44.63
48.63
48.63
60.63
60.63
60.63
60.63
60.63
15 BEND
A
50.5
50.5
50.5
54.5
54.5
66.5
66.5
66.5
66.5
66.5
INTERMEDIATE SECTION
STANDARD INLET
O*
914.4
914.4
914.4
914.4
914.4
914.4
914.4
914.4
914.4
914.4
I
P
N
533.4
609.6
711.2
711.2
838.2
863.6
914.4
1016.0
1168.4
1327.2
G
6.0 REF
(152.4mm)
180
96.4
128.5
169.8
206.6
273.1
298.4
342.0
426.9
555.4
651.8
3 Bypass Inlet
170
91.0
121.4
160.4
195.1
257.9
281.8
323.0
403.2
524.5
615.6
M
762.0
762.0
762.0
762.0
762.0
762.0
762.0
762.0
762.0
762.0
Page 12
150
80.3
107.1
141.5
172.1
227.6
248.6
285.0
355.7
462.8
543.2
Size (W x H)
9 x 12
12 x 12
16 x 12
16 x 14
21 x 14
14 x 20
16 x 20
20 x 20
26 x 20
32 x 20
140
75.0
100.0
132.1
160.7
212.4
232.1
266.0
332.0
432.0
506.9
Size
(W x H)
9 x 12
12 x 12
16 x 12
16 x 14
21 x 14
14 x 20
16 x 20
20 x 20
26 x 20
32 x 20
130
69.6
92.8
122.7
149.2
197.2
215.5
247.0
308.3
401.1
470.7
D
18
16.5
14.5
16.5
14
23.44
22.44
20.44
17.44
14.44
Size
(W x H)
228.6 x 304.8
304.8 x 304.8
406.4 x 304.8
406.4 x 355.6
533.4 x 355.6
355.6 x 508.0
406.4 x 508.0
508.0 x 508.0
660.4 x 508.0
812.8 x 508.0
10 BEND
33.513
33.513
33.513
33.513
33.513
36.83
36.83
36.83
36.83
36.83
767.537
767.537
767.537
767.537
767.537
847.09
847.09
847.09
847.09
847.09
1825.498
1825.498
1825.498
1825.498
1825.498
2739.898
2739.898
2739.898
2739.898
2739.898
80.645
80.645
80.645
80.645
80.645
89.916
89.916
89.916
89.916
89.916
921.944
921.944
921.944
921.944
921.944
1027.811
1027.811
1027.811
1027.811
1027.811
1825.498
1825.498
1825.498
1825.498
1825.498
2739.898
2739.898
2739.898
2739.898
2739.898
141.072
141.072
141.072
141.072
141.072
172.212
172.212
172.212
172.212
172.212
1071.677
1071.677
1071.677
1071.677
1071.677
1308.1
1308.1
1308.1
1308.1
1308.1
1825.498
1825.498
1825.498
1825.498
1825.498
2739.898
2739.898
2739.898
2739.898
2739.898
Size (W x H)
9 x 12
12 x 12
16 x 12
16 x 14
21 x 14
14 x 20
16 x 20
20 x 20
26 x 20
32 x 20
15 BEND
A
50.5
50.5
50.5
54.5
54.5
66.5
66.5
66.5
66.5
66.5
B
12
15
19
19
24
18
20
24
30
36
C
44.63
44.63
44.63
48.63
48.63
60.63
60.63
60.63
60.63
60.63
D
18
16.5
14.5
16.5
14
23.44
22.44
20.44
17.44
14.44
E
30.25
30.25
30.25
37.63
37.63
44.06
44.06
44.06
44.06
50.06
10 Bypass dump
A
E
D
B
C
100*
110*
120*
130*
140*
150*
160*
170*
180*
14800
18200
23300
26200
16280
20020
25630
28820
17760
21840
27960
31440
19240
23660
30290
34060
20720
25480
32620
36680
22200
27300
34950
39300
23680
29120
37280
41920
25160
30940
39610
44540
26640
32760
41940
47160
N O*
26
32
32
36
42.5
45.5
51.5
53.5
54
54
54
54
46
52
52
56
60
60
60
60
Size
(W x H)
660.4 x 660.4
812.8 x 660.4
812.8 x 812.8
914.4 x 812.8
100
110
120
130
3.8
4.6
5.9
6.7
377.4
464.1
594.2
668.1
415.1
510.5
653.6
734.9
452.9
556.9
713.0
801.7
490.6
603.3
772.4
868.5
140
150
528.4 566.1
649.7 696.2
831.8 891.2
935.3 1002.2
160
170
180
603.8
742.6
950.6
1069.0
641.6
789.0
1010.1
1135.8
679.3
835.4
1069.5
1202.6
660.4
812.8
812.8
914.4
660.4
660.4
812.8
812.8
850.9
1003.3
1003.3
1104.9
762.0
762.0
914.4
914.4
2438.4
2438.4
2438.4
2438.4
660.4
660.4
812.8
812.8
1168.4
1168.4
1168.4
1168.4
914.4
914.4
914.4
914.4
762.0
762.0
914.4
914.4
660.4
812.8
812.8
914.4
1079.5
1155.7
1308.1
1358.9
1371.6
1371.6
1371.6
1371.6
1168.4
1320.8
1320.8
1422.4
1524
1524
1524
1524
L
OVERALL LENGTH INSIDE
O
6.0 REF
(152.4mm)
3.0
(76.2mm)
STANDARD INLET
INTERMEDIATE
CROSS SECTION
HEAD
SECTION
INTERMEDIATE
SECTION
TAIL
SECTION
10 BEND
15 BEND
5 Bend
(Minimum)
1.4375
1.4375
1.4375
1.4375
33.375
33.375
33.375
33.375
107.875
107.875
107.875
107.875
3.75
3.75
3.75
3.75
42.5625
42.5625
42.5625
42.5625
107.875
107.875
107.875
107.875
6.8125
6.8125
6.8125
6.8125
51.5
51.5
51.5
51.5
107.875
107.875
107.875
107.875
R
Q
10 BEND
10 Bend
15 BEND
36.5125
36.5125
36.5125
36.5125
847.725
847.725
847.725
847.725
2740.025
2740.025
2740.025
2740.025
95.25
95.25
95.25
95.25
1081.0875
1081.0875
1081.0875
1081.0875
2740.025
2740.025
2740.025
2740.025
173.0375
173.0375
173.0375
173.0375
1308.1
1308.1
1308.1
1308.1
2740.025
2740.025
2740.025
2740.025
15 Bend
(Maximum)
R
Q
General Notes:
Capacities based on dry, free flowing, granular material conveyed horizontally with proper loading and discharging conditions at 45#/CF. (721 kg/m3).
Capacities based on using top load inlets. Bypass inlets will reduce capacity. Consult inside sales.
General specifications and dimensions are subject to change without notice.
General specifications and dimensions are intended to provide sales assistance and a preliminary guide to system layout only.
Page 13
Specifications
Capacity
BPH
CFH
MTH
24*
8000
10000
204
400
10000
12500
255
563
12000
15000
306
650
15000
18750
383
20000
25000
510
25000
31250
638
30000
37500
765
35000
43750
893
40000
50000
1021
45000
56250
1148
50000
62500
1276
57000
71250
1454
* Belt Speed in Feet Per Minute
Model
36*
42*
480
600
700
550
640
750
-
30*
400
500
650
-
48*
600
675
750
-
54*
500
550
625
700
BPH
8000
10000
12000
15000
20000
25000
30000
35000
40000
45000
50000
57000
Capacity
CFH
10000
12500
15000
18750
25000
31250
37500
43750
50000
56250
62500
71250
MTH
204
255
306
383
510
638
765
893
1021
1148
1276
1454
24
2.03
2.86
3.30
-
Model
36
42
2.44
3.05
3.56
2.79
3.25
3.81
-
30
2.03
2.54
3.30
-
48
3.05
3.43
3.81
-
54
2.54
2.79
3.18
3.56
A*
B*
C*
D*
E*
MIN*
48
48
48
48
48
48
E*
MAX
66
66
66
66
66
66
F* **
G*
24
26
30
47
120
76
5
30
26
30
47
120
76
5
36
26
30
47
120
76
5
42
26
30
47
120
76
5
48
26
30
47
120
76
5
54
26
30
47
120
76
5
* inches
** Based on 18.00 take-up. For actual take-up, see approval drawing.
H*
I*
J*
K*
L*
M*
N*
O*
P*
Q*
R*
6
6
6
6
6
6
24
24
24
24
24
24
14
16
22
28
34
40
19
19
19
19
19
19
15
15
15
15
15
15
30
30
30
30
30
30
27
33
39
45
51
57
26
32
38
44
50
56
30
36
42
48
54
60
43
49
55
61
67
73
38
44
50
56
62
68
610
610
610
610
610
610
356
406
559
711
864
1016
478
478
478
478
478
478
381
381
381
381
381
381
762
762
762
762
762
762
686
838
991
1143
1295
1448
660
813
965
1118
1270
1422
767
919
1072
1224
1377
1529
1097
1249
1402
1554
1707
1859
972
1124
1277
1429
1581
1734
Page 14
100*
2000
2700
3200
4200
4800
6000
7800
9600
10400
14400
21600
110*
2200
2970
3520
4620
5280
6600
8580
10560
11440
15840
23760
120*
2400
3240
3840
5040
5760
7200
9360
11520
12480
17280
25930
130*
2600
3510
4160
5460
6240
7800
10140
12480
13520
18720
28080
140*
2800
3780
4480
5880
6720
8400
10920
13440
14560
20160
30240
150*
3000
4050
4800
6300
7200
9000
11700
14400
15600
21600
32400
160*
3200
4320
5120
6720
7680
9600
12480
15360
16640
23040
34560
170*
3400
4590
5440
7140
8160
10200
13260
16320
17680
24480
36720
Size (W x H)
304.8 x 304.8
406.4 x 304.8
406.4 x 355.6
533.4 x 355.6
406.4 x 508.0
508.0 x 508.0
660.4 x 508.0
812.8 x 508.0
660.4 x685.8
914.4 x 685.8
914.4 x 990.6
170*
3400
4250
5100
6120
7820
9350
11220
12750
16660
20400
33320
Size (W x H)
304.8 x 304.8
406.4 x 304.8
406.4 x 355.6
533.4 x 355.6
406.4 x 508.0
508.0 x 508.0
660.4 x 508.0
812.8 x 508.0
660.4 x 685.8
914.4 x 685.8
914.4 x 990.6
100*
2000
2500
3000
3600
4600
5500
6600
7500
9800
12000
19600
110*
2200
2750
3300
3960
5060
6050
7260
8250
10780
13200
21560
120*
2400
3000
3600
4320
5520
6600
7920
9000
11760
14400
23520
130*
2600
3250
3900
4680
5980
7150
8580
9750
12740
15600
25480
140*
2800
3500
4200
5040
6440
7700
9240
10500
13720
16800
27440
150*
3000
3750
4500
5400
6900
8250
9900
11250
14700
18000
29400
160*
3200
4000
4800
5760
7360
8800
10560
12000
15680
19200
31360
12
16
16
21
16
20
26
32
26
36
36
12
12
14
14
20
20
20
20
27
27
39
20.25 60
20.25 60
23 60
23 60
30 72
30 72
30 72
30 72
39.50 104
39.50 104
52 108
42
42
42
42
48
48
48
48
78
78
82
30
30
30
30
36
36
36
36
42
42
42
17.25
17.25
19
19
26.25
26.25
26.25
26.25
37.50
37.50
50
48
48
48
48
48
48
48
48
72
72
84
2.25
2.25
2
2
2
2
2
2
2
2
2
24
24
24
24
24
24
24
24
24
24
24
12
16
16
21
16
20
26
32
26
36
36
22.25
24.25
26.25
28.75
32
34
37
40
44
49
61
30
30
30
30
30
30
30
30
30
30
42
24
28
28
33
36
40
46
52
46
56
56
36
36
36
36
36
36
36
36
36
48
48
Standard Inlet
J
Size
(W x H)
304.8 x 304.8
406.4 x 304.8
406.4 x 355.6
533.4 x 355.6
406.4 x 508.0
508.0 x 508.0
660.4 x 508.0
812.8 x 508.0
660.4 x 685.8
914.4 x 685.8
914.4 x 990.6
M
L
K
O**
F*
E
J
6.0 Ref.
(152.4mm)
G
P
H
* Discharge
Width Equals
Conveyor Width
Bend
Section
R
Q
** 3 or 4 are shortest
length of bypass. Other
lengths available.
A
1282.7
1282.7
1384.3
1384.3
1689.1
1689.1
1689.1
1689.1
1689.1
120
61.2
82.6
97.9
128.5
146.9
183.6
238.7
293.8
318.2
440.6
661.2
1
0.5
0.6
0.8
0.9
1.2
1.4
1.7
1.9
2.5
3.1
5.0
100
51.0
63.8
76.5
91.8
117.3
140.3
168.3
191.3
249.9
306.0
499.8
110
56.1
70.1
84.2
101.0
129.0
154.3
185.1
210.4
274.9
336.6
549.7
120
61.2
76.5
91.8
110.2
140.8
168.3
202.0
229.5
299.9
367.2
599.7
B
381.0
482.6
482.6
609.6
508.0
609.6
762.0
914.4
762.0
130
66.3
89.5
106.1
139.2
159.1
198.9
258.6
318.2
344.7
477.4
716.0
140
71.4
96.4
114.2
149.9
171.4
214.2
278.5
342.7
371.3
514.1
771.1
150*
76.5
103.3
122.4
160.7
183.6
229.5
298.4
367.2
397.8
550.8
826.1
160
81.6
110.2
130.6
171.4
195.8
244.8
318.2
391.7
424.3
587.5
881.2
170
86.7
117.0
138.7
182.1
208.1
260.1
338.1
416.2
450.8
624.2
936.3
130
66.3
82.9
99.5
119.3
152.5
182.3
218.8
248.6
324.8
397.8
649.7
140
71.4
89.3
107.1
128.5
164.2
196.4
235.6
267.8
349.8
428.4
699.7
150
76.5
95.6
114.8
137.7
176.0
210.4
252.5
286.9
374.8
459.0
749.7
160
81.6
102.0
122.4
146.9
187.7
224.4
269.3
306.0
399.8
489.6
799.6
170
86.7
108.4
130.1
156.1
199.4
238.4
286.1
325.1
424.8
520.2
849.6
304.8
406.4
406.4
533.4
406.4
508.0
660.4
812.8
660.4
914.4
914.4
304.8
304.8
355.6
355.6
508.0
508.0
508.0
508.0
685.8
685.8
990.6
514.4
514.4
584.2
584.2
762.0
762.0
762.0
762.0
1003.3
1003.3
1320.8
1524.0
1524.0
1524.0
1524.0
1828.8
1828.8
1828.8
1828.8
2641.6
2641.6
2743.2
1066.8
1066.8
1066.8
1066.8
1219.2
1219.2
1219.2
1219.2
1981.2
1981.2
2082.8
762.0
762.0
762.0
762.0
914.4
914.4
914.4
914.4
1066.8
1066.8
1066.8
438.2
438.2
482.6
482.6
666.8
666.8
666.8
666.8
952.5
952.5
1270
1219.2
1219.2
1219.2
1219.2
1219.2
1219.2
1219.2
1219.2
1828.8
1828.8
2133.6
57.2
57.2
57.2
57.2
50.8
50.8
50.8
50.8
50.8
50.8
50.8
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
609.6
304.8
406.4
406.4
533.4
406.4
508.0
660.4
812.8
660.4
914.4
914.4
565.2
616.0
666.8
730.3
812.8
863.6
939.8
1016.0
1117.6
1244.6
1549.4
762.0
762.0
762.0
762.0
762.0
762.0
762.0
762.0
762.0
762.0
1066.8
609.6
711.2
711.2
838.2
914.4
1016.0
1168.4
1320.8
1168.4
1422.4
1422.4
914.4
914.4
914.4
914.4
914.4
914.4
914.4
914.4
914.4
1219.2
1219.2
Bypass Inlet
110
56.1
75.7
89.8
117.8
134.6
168.3
218.8
269.3
291.7
403.9
605.8
Trough Section
100
51.0
68.9
81.6
107.1
122.4
153.0
198.9
244.8
265.2
367.2
550.8
1
0.5
0.7
0.8
1.1
1.2
1.5
2.0
2.4
2.7
3.7
5.5
C
1133.5
1133.5
1235.1
1235.1
1539.9
1539.9
1539.9
1539.9
1539.9
D
419.1
368.3
419.1
355.6
569.9
519.1
442.9
366.7
538.5
E
768.4
768.4
955.7
955.7
1119.2
1119.2
1119.2
1271.6
1478.3
15
12 Tall
14 Tall
20 Tall
27 Tall
39 Tall
30
12 Tall
14 Tall
20 Tall
27 Tall
39 Tall
45
12 Tall
14 Tall
20 Tall
27 Tall
39 Tall
60
12 Tall
14 Tall
20 Tall
27 Tall
39 Tall
P
2.5
2.5
3.8
3.8
3.7
P
9.8
9.8
12.8
12.8
14.5
P
21.0
21.0
28.0
28.0
31.6
P
36.0
36.0
48.0
48.0
54.0
Q
18.8
18.8
24.8
24.8
28.0
Q
36.0
36.0
47.5
47.5
54.0
Q
60.0
60.0
67.5
67.5
76.4
Q
62.5
62.5
83.3
83.3
93.5
R
72.0
72.0
96.0
96.0
108.0
R
72.0
72.0
96.0
96.0
108.0
R
72.0
72.0
96.0
96.0
108.0
R
72.0
72.0
96.0
96.0
108.0
P
63.5
63.5
95.3
95.3
94.0
P
247.7
247.7
323.9
323.9
368.3
P
533.4
533.4
711.2
711.2
802.6
P
914.4
914.4
1219.2
1219.2
1371.6
Q
476.3
476.3
628.7
628.7
711.2
Q
914.4
914.4
1206.5
1206.5
1371.6
Q
1524.0
1524.0
1714.5
1714.5
1940.6
Q
1587.5
1587.5
2114.6
2114.6
2374.9
R
1828.8
1828.8
2438.4
2438.4
2743.2
R
1828.8
1828.8
2438.4
2438.4
2743.2
R
1828.8
1828.8
2438.4
2438.4
2743.2
R
1828.8
1828.8
2438.4
2438.4
2743.2
GS-019
www.gsiag.com
GS-019 DEC/11
Copyright 2011 by GSI Group, Inc. | Printed in the USA | Due to continual improvements,
GSI Group, Inc. reserves the right to change designs and specifications without notice.