Académique Documents
Professionnel Documents
Culture Documents
40
50
60
30
0.30
0.45
0.50
0.75
300
250
200
350
200
300
250
350
For pin connected members, the allowable stress on the net area of
the pinhole for pin connected members is _________.
(NSCP 504.4.1.1)
0.60 Fy
0.50 Fy
0.45 Fy
0.40 Fy
0.60 Fy
0.45 Fy
0.33 Fy
0.66 Fy
For pin connected plates, the minimum net area beyond the pinhole
parallel to the axis of the member shall not be less than _______of
the net area across the pinhole. (NSCP 504.4.2.1)
3/4
2/3
3/5
1/3
1 mm
0.5 mm
0.80 mm
2 mm
700 mm
500 mm
600 mm
400 mm
The ratio L/r for lacing bars arranged in single system shall not
exceed ________. (NSCP 505.5.80)
140 mm
200 mm
250 mm
100 mm
The ratio L/r for lacing bars arranged in double system shall not
exceed ________.
140 mm
200 mm
250 mm
100 mm
For members bent about their strong or weak axes, members with
compact sections where the flanges continuously connected to web
the allowable bending stress is _________. (NSCP 506.4.1.1)
0.75 Fy
0.60 Fy
0.45 Fy
0.66 Fy
For box type and tabular textural members that meet the non
compact section requirements of section 502.6, the allowable
bending stress is ________. (NSCP 506.4.1.1)
0.75 Fy
0.60 Fy
0.45 Fy
0.66 Fy
300 mm
400 mm
350 mm
250 mm
50%
60%
80%
75%
50 mm
100 mm
25 mm
40 mm
6 diameter of connector
10 diameter of connector
12 diameter of connector
5 diameter of connector
8 diameter of connector
6 diameter of connector
5 diameter of connector
10 diameter of connector
30
50
26.70
35
50
70
65
100
800
750
900
1000
The minimum sizes of filler weld for plates with thickness greater
than 20mm is ________. (NSCP 510.3.3.2)
10
8
15
20
The minimum sizes of filler weld for plates with thickness 6mm is
________? (NSCP 510.3.3.2)
3 mm
6 mm
8 mm
10 mm
The minimum sizes of filler weld for plates with thickness over
12mm to 20mm is ________? (NSCP 510.3.3.2)
8 mm
10 mm
6 mm
5 mm
The minimum sizes of filler weld for plates with thickness over
12mm to 20mm is ________? (NSCP 510.3.3.2)
8 mm
10 mm
6 mm
5 mm