Académique Documents
Professionnel Documents
Culture Documents
Version: 217/04a
Applications
DT Transmission Oil is designed for
transmissions and drive trains only and should
not be used as an engine oil.
The SAE 10W and SAE 30 grades are
approved as Allison C-4 fluids.
Suitable for Caterpillar road building equipment
with wet brakes.
Available in SAE 10W, 30, 50 and 60.
Page 1 of 2
Product Information
A PRODUCT OF ASHLAND CONSUMER MARKETS, A COMMERCIAL UNIT OF ASHLAND INC.
Typical Properties
Typical property characteristics are based on current
production. Whilst future production will conform to
Valvoline specifications, variations in these
characteristics may occur.
DT Transmission Oil
SAE Viscosity Grade
Viscosity, mm2/s @ 100 C.
ASTM D-445
Viscosity, mm2/s @ 40 C.
ASTM D-445
Viscosity Index
ASTM D-2270
TBN, mg KOH/g
ASTM D-2896
Pour Point, C
ASTM D-5950
Specific Gravity @ 15.6C.
ASTM D-4052
Flash Point, COC, C.
ASTM D-92
Author:
AdG
Replaces 217/03a
10W
5.7
30
133
11.5
-39
0.855
224
*Trademark owned by a third party Trademark of Ashland or its subsidiaries, registered in various countries
2012, Ashland
All statements, information and data presented herein are believed to be accurate and reliable, but are not to be taken as a guarantee, an express warranty,
or an implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which Ashland Inc. and its subsidiaries
assume legal responsibility.
Page 2 of 2