Académique Documents
Professionnel Documents
Culture Documents
constructive solutions
Properties
Working Life
Typical result
15 N/mm2 @ 3 hours
:
:
:
:
30 N/mm2 @ 1 day
40 N/mm2 @ 7 days
45 N/mm2 @ 28 days
20 mins @ 20C 10
mins @ 35C
:
:
60 mins
90 mins
:
:
:
2 hour
4 hours
11 X 10-6/C
:
:
Description
Specification
Technical support
Design criteria
Page 1
Renderoc RS Xtra
Instructions for use
Placing
Preparation
Priming
Mixing
Care should be taken to ensure that Renderoc RSXtra is
thoroughly mixed. A forced action mixer, suitable for fluid
mixes, is essential (free fall mixers are not suitable). Hand
mixing of single bags should be carried out in a suitablysized mixing vessel, using a slow speed drill (400/500
rpm) + Fosroc mixing paddle attachment. Under no
circumstances should part mixing be considered.
constructive solutions
Page 2
Renderoc RS Xtra
Cleaning
Precautions
Limitations
Renderoc RSXtra should not be used when the
temperature is below 5C and falling.
Do not mix part bags.
The product should not be exposed to moving water
during application.
:
:
:
:
20 kg bags
200 litre drums
5 litre packs
1 & 4 litre packs
Fire
:
:
:
Flash points
Storage
33C
Shelf life
For further information, refer to the Product Material
Safety Data Sheet.
constructive solutions
Page 3
Renderoc RS Xtra
Additional Information
Fosroc manufactures a wide range of complementary
products which include:
Waterproofing membranes & waterstops
Joint sealants & filler boards
Cementitious & epoxy grouts
Specialised flooring materials
Fosroc additionally offers a comprehensive package of
products specifically designed for the repair and
refurbishment of damaged concrete. Fosrocs Systematic
Approach to concrete repair features the following:
Hand-placed repair mortars
Spray grade repair mortars
Fluid micro-concretes
Chemically resistant epoxy mortars
Anti-carbonation/anti-chloride protective coatings
Chemical and abrasion resistant coatings
For further information on any of the above, please consult
your local Fosroc office - as below.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: fosam@fosroc.com
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 4
FO SA/RRRSxtra/05/A