Académique Documents
Professionnel Documents
Culture Documents
NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice.
Copyright
Printed in USA
DECEMBER 2008
5-2
POWER SYSTEMS, INC.
NOTE:
Where applicable, pole line hardware manufactured by Hubbell Power Systems, Inc.
is made from steel produced in accordance
with ASTM A575 and/or ASTM A576.
Where galvanized, items are galvanized in
accordance with ASTM A153.
Where appropriate, these pole line hardware items meet or exceed the following
ANSI/NEMA specifications:
ANSI
C135.4
C135.1
C135.2
C135.22
C135.14
C135.17
C135.7
C135.5
NEMA
PH1
PH10
PH38
PH20
PH25
DECEMBER 2008
5-3
POWER SYSTEMS, INC.
ADAPTER, THIMBLE
Used to change 1-inch pin insulator thread to 13/8-inch pin insulator
thread.
Dimensions in Inches
Catalog
No.
4257
No. 4257
Exterior
Thread Dia.
13/8 inch
Interior
Thread Dia.
1 inch
Overall
Length
21/4
Approx. Ship
Weight, Lbs.
Per 100 Pcs.
63
4"
Dia.
71/2" Holes
A-Size Angles
B
For suspending cables at a distance from the pole, a No. 7903 Cable Suspension Clamp is usually used under the arm (See page 5-21), attached
through the center slot to a 5/8" machine bolt with a washer under the
bolt head. Cable extension from the pole is 23" for No. 7920, 41" for
No. 7921. Cable clamp with attachment bolt and pole mounting bolts,
or lag screws, must be ordered separately. Hot dip galvanized.
Catalog
No.
7920
7921
Dimensions in Inches
A Angle Size
3 x 21/2 x 1/4
31/2 x 21/2 x 5/16
B
81/2
183/4
C
26
441/2
Approx. Ship
Weight, Lbs.
Per 100 Pcs.
2900
6200
No. 7920
No. PS6280
No. 6278
For use with No. 6276 and No. 6277 Pole Bands (See next page).
Deadend clevis has 13/16" hole to match rectangular holes in bands, and
is attached with cone head bolt. Guy clips made in two pieces: top,
5/16" x 2 1/2" steel; bottom, 3/16" x 2 1/2" steel. A 3/4" x 2 1/2" machine bolt
with cotter pin fastens thimble. Guy clip also includes one No. 6280
conehead bolt which has square shoulder. Sheave can be used with
C2030183 on page 5-4.
Catalog
No.
6278
PS6280
451016P
Description
Guy Clip
Cone Head Bolt
Sheave for Guy Clip
Steel Size
Inches A
See above
3/4 x 21/2
.81" dia.
P451016
DECEMBER 2008
5-4
POWER SYSTEMS, INC.
3/16"
These are
x 4" flat steel bands, shipped assembled with one 3/4 x
4" curved bolt and one 3/4 x 21/2" cone head bolt. Hot dip galvanized.
Extra cone head bolts, for attaching deadend clevises and guy clips,
must be ordered separately. (See Accessories on page 5-3). One to eight
attachments can be made from each pole band.
No. 6277
Catalog
No.
6276
6277
Description
Band, 6" - 10"
Band, 8" - 14"
RUS Listed
C2030187
1/
4"
thick
Cat. No.
(Complete
Assembly)
Type
C2030194
4 Way, 90
6" - 111/2"
3/4
x 6"
9/16"
1/4
x 4"
1560
C2030197
4 Way, 90
91/2" - 14"
3/4
x 6"
9/16"
1/4
x 4"
2360
4 Pcs. 4 Pcs.
C2030200
4 Way, 90
91/2" - 16"
3/4
x 8"
9/16"
1/4
x 4"
2820
4 Pcs.
Pole
Dia.
Size
Stud
Lag
Hole
Size
4 Pcs.
C2030141
C2030140
Approx.
Ship
Size Wt. Per
Steel 100 Pcs.
C2031088
or C2050141
C2031087
C2050140
Use steel Pole Bands on wood poles. Take-offs for guy and insulation
attachments can be made by using connecting links (see below). Bands
are shipped unassembled.
4 Pcs.
4 Pcs.
71/2"
2"
3"
15/
16"
11/4" Dia.
Dia.
No. C2030183
DECEMBER 2008
Steel
Size
Inches
1/4 x 3
Length, Inches
(Center Hole
to Center Hole)
71/2
Approx.
Ship Wt. Lbs.
Per 100 Pieces
360
5-5
Cat.
No.
636412
PS6366
PS6367
PS6368
Pole
O.D.
5
65/8
75/8
85/8
PS6366
Single Type
Double Type
Single Type
Dim. in Inches
Approx.
Ship
Wt. Lbs.
Per 100
Pcs.
304
368
406
480
Dim. in Inches
Cat.
No.
637412
PS6376
PS6377
PS6378
Pole
O.D.
5
65/8
75/8
85/8
Approx.
Ship
Wt. Lbs.
Per 100
Pcs.
388
380
475
524
PS6376
Double Type
Dimensions in Inches
A
Angle Size
Approx. Ship
Wt. Lbs.
Per 100 Pieces
Straight Bayonets
5436
5466
PS5484
36
66
84
10
15
20
940
2200
3430
2 x 2 x 1/4
21/2 x 21/2 x 1/4
3 x 3 x 1/4
5466
BOLTS, CARRIAGE
Carriage Bolts have square nuts, finished points and rolled threads.
Standard heads have square shoulders. Open-hearth steel. Hot dip
galvanized.
Approx.
Ship
Wt. Lbs.
Bolt Thread Per 100
Length Length
Pcs.
Approx.
Ship
Wt. Lbs.
Bolt Thread Per 100
Length Length
Pcs.
Dim. in Inches
Dim. in Inches
Cat.
No.
3/8-Inch
*8634
*863412
*8635
8636
8637
4
41/2
5
6
7
1/2-Inch
Diameter
13/4
13/4
13/4
13/4
13/4
Cat.
No.
15.6
17
17.6
21.6
22
*8645
864512
*8646
8647
5
51/2
6
7
Diameter
3
3
3
4
31
37.5
38
44
No. 8634
DECEMBER 2008
5-6
BOLTS, CLEVIS
No. 15828
A
B
E 21/2
D
C
Dimensions in Inches
A
8
10
12
14
8
10
12
14
13/
1/2
5/
13/
1/2
5/
13/
1/2
5/
13/
1/2
3/
13/
5/8
3/
13/
5/8
3/
13/
5/8
3/
13/
5/8
16
16
16
16
16
16
16
16
E
113/16
113/16
113/16
113/16
113/16
113/16
113/16
113/16
5/
Thread
Length
6
6
6
6
6
6
6
6
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
150
199
217
220
200
257
280
304
RUS Listed
5/8" Bolt has 12,400 Pound Rated Tensile Strength
3/4" Bolt has 18,350 Pound Rated Tensile Strength
5/8-Inch
A
Catalog
No.
19784
19786
19788
19790
19792
Inside
Dim. A
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
Diameter
Length
Outside Under Eye
Dim. B C (Inches)
14
2 5/8
16
2 5/8
18
2 5/8
20
2 5/8
22
2 5/8
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
196
220
232
256
260
BOLTS, DOUBLE-ARMING
FULL THREAD
Bolts permit replacement ease in double arms and offer added flexibility of use. Cone type point for easy starting and driving-out without
damage to threads. Each bolt provided with four square nuts. Hot dip
galvanized steel.
Approx.
Ship
Catalog Length, Wt. Lbs.
No.
Inches Per 100 Pcs
1/
2-Inch
No. 8846
DECEMBER 2008
Catalog
No.
Length,
Inches
Approx.
Ship
Wt. Lbs.
Per 100 Pcs
Shank Diameter
8846
16
117
5/8-Inch Diameter
*8862
12
126
*8864
14
156
*8866
16
176
*8868
18
196
*8870
20
204
*8872
22
220
*8874
24
240
8876
26
256
8877
28
268
8878
30
270
8879
32
280
12,400 Pound Rated Tensile Strength
*ANSI Standard
RUS Listed
HUBBELL
8848
18
Diameter
6
8
12
14
16
18
20
22
24
26
125
3/4-Inch
C2050140
C2050141
*8882
*8884
*8886
*8888
*8890
*8892
*8894
8896
128
150
234
240
248
272
292
316
328
365
5-7
BOLTS, MACHINE
Are also called crossarm bolts or through bolts. Bolts have rolled
threads and one square nut. Bolts six inches or longer have cone-type
points. Hot dip galvanized.
Approx.
Ship
Wt. Lbs.
Per 100
Pcs.
Dim. in Inches
Cat.
No.
Bolt
Length
Thread
Length
3/8-Inch
8604
860412
15
41/2
17.2
Bolt
Length
Thread
Length
Approx.
Ship
Wt. Lbs.
Per 100
Pcs.
Dim. in Inches
Cat.
No.
Diameter
*8605
860512
18.8
51/2
19.6
49
1/2-Inch
No. 8810
Diameter
*8708
870112
11/2
11/4
*870412
41/2
33
8709
57
*8705
35
*8710
10
60
*8706
39
*8712
12
71
8707
48
8714
14
73
17.6
5/8-Inch
Diameter
8805
60
*8814
14
126
*8806
69
*8816
16
134
8807
75
*8818
18
149
*8808
78
*8820
20
164
8809
84
8822
22
176
*8810
10
99
8824
24
194
*8812
12
18
20
22
24
26
6
6
6
6
6
232
252
268
304
308
No. 860512
112
12,400 Pound Rated Tensile Strength
3/4-Inch
Diameter
*8908
126
*8918
*8910
10
154
8920
*8912
12
166
8922
*8914
14
188
8924
*8916
16
225
8926
7/8-Inch
Diameter
*C2050254
14
284
*C2050255
16
316
*C2050256
18
352
C2050257
20
390
C2050258
22
425
25,400 Pound Rated Tensile Strength
*ANSI Standard
RUS Listed
BOLTS, OVALEYE
Bolts with 5/8" and 3/4" shanks have 11/2" x 2" ovaleyes. Drop-forged,
galvanized steel bolts have cone type points and rolled threads.
Catalog
No.
Length
Under
Eye
Inches
1/2-Inch
*29939
Approx.
Ship
Thread
Wt. Lbs.
Length
Inches Per 100 Pcs.
Catalog
No.
Length
Under
Eye
Inches
Approx.
Ship
Thread
Wt. Lbs.
Length
Inches Per 100 Pcs.
No. 29960
77
*29943
12
100
6
8
9
10
12
14
16
18
20
4
4
4
6
6
6
6
6
6
12,400 Pound Rated Tensile Strength
100
104
113
122
144
146
168
208
240
29978
29980
29982
29984
29986
29988
8
10
12
14
16
18
4
4
6
6
6
6
180
200
228
248
268
314
DECEMBER 2008
5-8
POWER SYSTEMS, INC.
Type
Ovaleye
Ovaleye
Hookeye
Size of
Eye
11/4 x 15/8
11/4 x 15/8
3/4
Dia.
1/2
1/2
3/8
Length
Under Eye
6
4
31/2
1 "
4
Approx. Ship
Wt. Lbs.
Per 100 Pieces
65
54
16
BOLTS, THIMBLEYE
R
D
C
No. 5112T
Dimensions in Inches
A B C D E
R
5/8 13/8 9/16 11/16 11/2 1/4
3/4 11/2 11/16 13/16 15/8 9/32
No. 5612
Catalog No.
Size
Straight Angle
Inches
Bolt
Bolt
DG1F8 DG4F8 5/8 x 8
*5510 *5010 5/8 x 10
*5512 *5012 5/8 x 12
*5514 *5014 5/8 x 14
5516 5016 5/8 x 16
5/8 x 18
DG1F18
Approx.
Ship
Thread
Length Wt. Lbs.
Inches per 100 Pcs.
112
4
148
4
176
6
188
6
192
6
200
6
Catalog No.
Straight Angle
Bolt
Bolt
5110T
5612 5112T
5614 5114T
Size
Inches
3/4 x 10
3/4 x 12
3/4 x 14
Approx.
Ship
Thread
Length Wt. Lbs.
Inches Per 100 Pcs.
228
4
244
6
264
6
HEXAGONAL SECTION
FOR WRENCH HOLD
138"
114"
5
8"
Includes square nut, round washer, and cotter key on short end and
Square nut and M-F locknut on long end. Used with spool insulators
ANSI 53-2. Hot dip galvanized.
Dimensions in Inches
414"
112"
A
L
Catalog
No.
7826
7828
7830
7832
7834
A
8
9
10
12
14
L
133/4
143/4
153/4
173/4
193/4
B
6
6
6
6
6
Approx. Ship
Wt. Lbs. Per
100 Pieces
166
162
168
186
204
DECEMBER 2008
5-9
POWER SYSTEMS, INC.
114"
114"
5 "
8
412"
A
L
Dimensions in Inches
Shank Length
Catalog
No.
7741
774112
7742
7743
7744
11/16" Hole
A
8
9
10
12
14
L
123/4
133/4
143/4
163/4
183/4
Approx. Ship
Wt. Lbs. Per
100 Pieces
138
144
170
186
196
B
4
4
4
6
6
No. 6979
Catalog
No.
*6979
6984
T2030367
Hole
Length
Feet
5
7
10
Angle Size
Inches
13/4 x 13/4 x 3/16
13/4 x 13/4 x 3/16
2 x 2 x 1/4
Pole
Arm
Attach Attach
9/16
9/16
9/16
11/16
11/16
11/16
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
1300
1788
1780
*NEMA Standard
RUS listed
No. 6999
Catalog
No.
6999
A
27
Dimensions in Inches
Hole Dia.
Size of
Approx. Ship
Pole
Arm
Angle
Wt. Lbs.
B
C
D
E
Per 100 Pcs.
11/16
11/16
42
13/4 x 13/4 x 3/16
930
RUS listed
Furnished with 9/16" holes for crossarm mounting. 11/16" holes for pole
mounting. The1 series has a 9/16" x 1" slot in place of the 9/16" diameter crossarm mounting holes. Hot dip galvanized.
B
C
No. 6940
Catalog
No.
*6940
*6941
*6942
*6948
*6953
6955
69401
69421
Dimensions in Inches
Size of Angle
11/2 x 11/2 x 3/16
11/2 x 11/2 x 3/16
11/2 x 11/2 x 3/16
11/2 x 11/2 x 3/16
13/4 x 13/4 x 3/16
13/4 x 13/4 x 3/16
11/2 x 11/2 x 3/16
11/2 x 11/2 x 3/16
A
45
51
63
51
63
75
45
63
B
42
48
60
48
60
72
42
60
C
12
18
18
14
18
18
12
18
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
820
980
1100
920
1340
1600
820
1120
*NEMA Standard
RUS listed
DECEMBER 2008
5-10
POWER SYSTEMS, INC.
Catalog
No.
7020
7026
*7028
*7030
*7032
x 17/32" Braces
Approx. Ship
"A"
Wt. Lbs.
Per 100 Pcs.
18
140
24
185
26
200
28
215
225
30
1/4"
Catalog
No.
7126
7128
7130
7132
C2030233
T2030459
T2060398
*NEMA Standard
x 11/4" Braces
Approx. Ship.
"A"
Wt. Lbs.
Per 100 Pcs.
24
230
26
240
28
255
30
275
32
295
34
315
335
36
RUS listed
No. 7020
1"
A
1"
Dimensions in Inches
Steel Size
3/4 Rd.
5/8 Rd.
Mting. Distance
12
12
RUS listed
DECEMBER 2008
5-11
BRACKETS, CUTOUT,
ARRESTERS & POTHEAD
C2060193
These brackets offer a wide variety of one, two or three unit mounting applications. Completely assembled brackets are available
as well as individual parts for field adaptation. The one and two
unit brackets can be mounted with the vertical member running
either up or down the pole.
Catalog
No.
C2060189
C2060190
C2060192
C2060193
Description
Pole bracket for mounting single
unit of apparatus
Cross strap for mounting two
units of apparatus
C2060189 and C2060190
C2060189 and C2060190 and lower strap
for third unit (incl. grd. clamp)
11/2"
121/8"
11/2"
8"
8"
C2060189
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
390
5"
613/16"
LOWER STRAP
FOR THIRD UNIT
230
C2060192
630
790
30
81/2"
81/2"
C2060190
1/
2"
x 2" bolts
Bracket
Description
Crossarm Bracket NEMA Type A
Crossarm Bracket NEMA Type B
Crossarm Mounting Bracket
Pole Mounting Bracket
Clearance Dimensions
Crossarm to
Wt. Per
Mtg. Bolt
100 lb.
29/16"
250
25/8"
284
51/4"
375
Pole to Mtg. Strap
400
5"
1/ " x 2"
2
carriage
bolt
3/
8" x 5"
carriage bolts
Crossarm
Brackets
*NEMA Standard
5"
41/4"
41/4"
Pole Bracket
30
3"
1"
73/8"
grounding lug
103/8"
31/
2"
7/ "
16
dia.
1"
3"
2"
3/ "
8
11/
16"
2 slots
Catalog No.
Description
A
(inches)
C2060299
12
767
7.25
675
C2060547
DECEMBER 2008
5-12
POWER SYSTEMS, INC.
BRACKETS, EXTENSION
Where obstructions are to be overcome and where proper clearances are
required, this bracket is fastened to the pole for mounting secondary
racks. Made of hot-galvanized 9-gauge steel, it is equipped with a 5/8" x
2" carriage bolt. Curved back is 3" wide.
Dimensions in Inches
Mounting Holes
Side
Extension
Center
9/16
11/16
6
9/16
11/16
9
Catalog
No.
*PS2355
*2357
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
308
405
No. 2355
*NEMA Standard
Catalog
No.
C2060004
Arm
Length
15"
Rod
Diameter
5/8"
Pole
Mting.
Hole Dia.
1/2"
No. C2060004
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
800
RUS listed
Catalog
No.
3470
Length Pole
Bearing Surface
21/2
Approx. Ship
Wt. Lbs.
Per 100 Pieces
124
No. 3470
Hole
Dia.
11/16"
RUS listed
DECEMBER 2008
Overall
Height
101/2
Hole
Spacing
8
Steel
Size
1/4" x 3"
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
380
No. 2157
5-13
POWER SYSTEMS, INC.
31/2" R
W
11/ "
16
Dia. hole
L
3/ "
8
A
41/2"
10"
D
11/ "
16
load table
x 11/4" slot
C2060009
Catalog
Number
*C2060009
*C2060010
C2060011
51/4"
11/ "
16
11/ "
16
13/ "
16
13/ "
16
hole
hole
30
11/ "
16
13/ "
16
41/2"
81/2"
hole
13/ "
16
hole
D
13/16
13/16
13/16
W
4
4
4
Angle
A
15
15
15
x 13/8" slot
30
81/2"
L
91/2
12
15
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
1220
1669
2066
83/4"
x 13/8" slot
Dimensions
In Inches
11/ "
16
x 15/16" slot
hole
C2060162 C2060209
Catalog Number
13/16" Hole
*C2060209
C2060162
11/16"
Hole
16919
Pole
Insulator
Mounting
Stud
Bolts Required Bolts Required
3/4"
Two 5/8"
3/4"
Two 5/8"
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
650
440
1817/32"
81/4"
91/2"
60
13/ "
16
11/ "
16
3/ "
8
x 21/2"
Stock
Hole
Holes
13/ "
16
x 11/4"
Hole
No. 9183
Insulator Stud
Bolts Required
5/8"
Includes both sections of bracket
Catalog
Number
9183
DECEMBER 2008
5-14
POWER SYSTEMS, INC.
C2060169
Adjustment
11/4" 3"
No. 8205
Mtg.
Holes
9/32
Dimensions in Inches
Ins.
Steel
A
B
Holes
Size
13/32
1/2 x 3/16 43/4
27/8
C
25/8
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
82
These lightweight, easy-to-handle aluminum transformer mounting brackets are designed for 3 KVA thru 250 KVA transformers. Their bolted, rugged construction has pre-drilled holes for mounting. The convenient key-hole has a jump-proof
lip for a secure mounting.
Units are designed to accommodate mounting one, two or three transformers and will fit NEMA- A, B and C lugs. A functional grounding lug is built-in on the back.
NO LONGER AVAILABLE.
PLEASE SEE
CATALOG SECTION 5B FOR
UPDATED VERSIONS.
Catalog No.
C2128007
C2128007A
C2128007B
C2128007AB
Description
No transformer mtg. bolts
5/8 x 13/4-in. transf. mtg. bolts
3/4 x 2 in. transf. mtg. bolts
5/8 & 3/4-in. transf. mtg. bolts
DECEMBER 2008
Approx. Ship
Wt. Lbs.
36
36
36
36
BRACKETS,
TRANSFORMER MOUNTING
5-15
POWER SYSTEMS, INC.
RACK-FRAME TYPE
C2120141
C2120146
Transformer
Lug Dimension
C2120141
3 to 50 KVA
T2120222
NEMA
A
LUGS
C2120142
T2120223
C2120143
T2120224
3 to 333 KVA**
NEMA
A LUGS
NEMA
B LUGS
C2120144
55 lb.
2 THRU-BOLTS
or
1 THRU-BOLT & 2 lag screws
53 lb.
** 2 Pole BANDS
75 lb.
2 THRU-BOLTS
61 lb.
Pole
Diameter
61/2 - 111/2"
Dimensions
A
B
61/2"
Tested to
2000 lb.,
per
transformer
position,
simultaneous
loading
211/2"
41/2"
25"
43/4"
Tested to
5000 lb.,
per
transformer
position
simultaneous
loading
371/2"
91/2"
N/A
7 - 12"
N/A
75 to 500 KVA
T2120226
NEMA
C LUGS
NEMA
B LUGS
2 Pole BANDS
102 lb
7 - 12"
2 THRU-BOLTS
83 lb.
N/A
2 THRU-BOLTS
T2120228
(1) Note: "T" prefix indicates unit has lifting eye.
#Order Adapter plate for type C lugs separately, see page 5-16.
85 lb.
Strength
31"
C2120145
*C2120147
Wt.
Each
T2120225
C2120146
T2120227
C2120143
Tested to
5000 lb.,
per
transformer
position
simultaneous
loading
N/A
RUS listed
**If cooling fins fit, see dimensions A and B.
*Can also mount NEMA A lugs.
DECEMBER 2008
5-16
POWER SYSTEMS, INC.
TRANSFORMER BRACKETS
Two Transformer Brackets
One piece construction. Drilled for banding or through bolting to pole.
Has transformer mounting bolts and ground bolt assembly. Brackets
have 12" and 24" spacing for mixed bank application. Tested to 4,000
lbs. per transformer position. Bracket C2120001 is mounted with two
bolts or one bolt and lag screw.
Catalog
No.
*C2120001
Description
Through Bolt Type
Ship
Wt. Lbs.
Each
30
Transformer
KVA Rating
75 KVA and
100 KVA
*RUS listed
C2110017
Description
Top plate with jump-proof lips,
less bolts
Bottom plate with open end slot,
less bolts
Ship
Wt. Lbs. Each
12.25
11.5
4316"
13 "
16
3"
11 "
16
4316"
3"
3"
3"
C2110009
Vertical Adapter Plate
One plate is required for each
transformer. Plates furnished with
three 5/8" x 13/4" machine bolts.
Catalog
No.
C2110009
C2110012
C2110015
C2110016
C2110017
C2110058
5"
16"
7"
C2110012
Horizontal Adapter Plate
Two bracket assemblies (5250 or
5350), can be used for mounting
167 KVA to 500 KVA by adding
No. C2110012 horizontal adapter
plates. Plates should be used with
two brackets to make a complete
assembly. Two plates are required
for each transformer. Each plate
is furnished with one 5/8" x 13/4"
machine bolt.
Description
Adapter Plate for Mtg. Trans. on Single
Segment, w/machine bolts.
Adapter Plate for Mtg. Trans. with Type
C lug spacing, w/machine bolts.
Plate with 3" offset, w/machine bolts.
Identical to C2110017 except open end
mounting slot less jump-proof lips
Top plate with jump-proof lips
Includes C2110016, C2110017 and four
5/ " x 13/ " bolts and nuts
8
4
DECEMBER 2008
8"
5"
14"
3"
3"
Approx. Ship
Wt. Each Lbs.
5.4
9.2
10.5
10.4
10.3
22
16"
C2110015 Horizontal Adapter Plate
9"
3316"
3"
1 "
2
412"
13 "
16
16"
C2110017
Horizontal Adapter Plate
Horizontal adapter plates C2110015, C2110016 and
C2110017, may be used in lieu of No. C2110012
plate where more extension from bracket is desired
when mounting 167 KVA to 500 KVA transformers
with Type C lug spacing. Two plates required per
transformer. Furnished with two 5/8" x 13/4" bolts
each as noted.
HUBBELL / CHANCE CENTRALIA, MISSOURI
5-17
POWER SYSTEMS, INC.
BRACKETS,
TRANSFORMER MOUNTING
BANDED CLUSTER MOUNTS
Fits most 3 KVA to 500 KVA transformers
These easy-to-install cluster mounts have a curved back to fit
round, tapered poles from 6" (15.2 cm) to 101/2" (26.7 cm) in
diameter. Manufactured of high-strength steel, galvanized
per ASTM A-153. Standard duty mounts have one set of four
6" long clamping bolts. Heavy-duty mounts have two sets of
bolts (see sketch).
Lag screws can be used to position the mounting bracket before tightening clamping bolts. Support rating, however, does
not depend on the use of lag screws. All banding hardware
for mounting to the pole, hardware to attach transformer
Heavy Duty
Bracket
NEMA
A
LUGS
SINGLE PHASE
3 thru 50 KVA Transformers
THREE PHASE
15 and 30 KVA Transformers
Catalog
Number
115
Consists of
1 #5150
Transformer
Bracket and
1 #C2110009
Vertical Bracket
Weight
Lb.
27.5
No. 115
Catalog
Number
215
Consists of
1 #5250
Transformer
Bracket and
2 #C2110009
Vertical Bracket
No. 215
Weight
Lb.
39
Catalog
Number
315
Consists of
1 #5350
Transformer
Bracket and
3 #C2110009
Vertical Bracket
No. 315
Weight
Lb.
50
Catalog
Number
HD315
Consists of
1 #HD5350
Transformer
Bracket and
3 #C2110009
Vertical Bracket
Weight
Lb.
65
RUS listed
NEMA
B
LUGS
SINGLE PHASE
75, 100 and 167 KVA Transformers
THREE PHASE
45 and 75 KVA Transformers
Will also mount Type A lugs, 12" spacing
No. PS150
Catalog
Number
PS150
Consists of
2 #5150
Transformer
Brackets
RUS listed
Weight
Lb.
43
Catalog
Number
PS250
Consists of
2 #5250
Transformer
Brackets
Weight
Lb.
64
No. PS250
Catalog
Number
350
Consists of
2 #5350
Transformer
Brackets
Weight
Lb.
72
No. 350
Catalog
Number
HD350
Consists of
2 #HD5350
Transformer
Brackets
Weight
Lb.
86
DECEMBER 2008
5-18
POWER SYSTEMS, INC.
BRACKETS,
TRANSFORMER MOUNTING
NEMA
C
LUGS
Weight
Lb.
No. 3100
Weight
Lb.
Catalog
Number
HD3100
Consists of
2 #HD5350
Transformer
Brackets and
6 #C2110012
Horizontal Brackets
129.6
137.6
RUS listed
Heavy Duty
Bracket
HD3100
Ground
Lug
Ground
Lug
No. 5150 Bracket
Ground
Lug
No. 5250 Bracket
9/ "
16
C2030187
Cluster Mount
Segment
2.5 lb.
1/ " stock
4
C2110019 or
C2110021
Transformer Mounting
Bracket
9 lb.
1/ " stock
4
13/16"
DECEMBER 2008
5-19
POWER SYSTEMS, INC.
BRACKETS, TRANSFORMER,
SECONDARY LEAD
The Chance Secondary Lead Transformer Bracket is a device that serves
as a support for secondary lead wires. Made to clamp over the rolled edge
at the bottom of the transformer, it fits all popular distribution transformers with steel tank. Clamp and bolt are hot dip galvanized steel.
Bolt end has a plastic cap to prevent scratching the outer surface of the
transformer. Furnished as a bracket or with insulator assembled.
Catalog
Description
No.
9113S * With Non-ANSI 21/4 x 21/8"
Spool Insulator
Ins. Assembled
With ANSI 53-2
9114S *
Ins. Assembled
Dimensions in Inches
Steel Size
Size of
of
Insulator
Clamp
Bolt
5/16 x 11/4
1/2 x 5
1/2
x6
5/16
x 11/4
Approx.
Ship Wt.
Lbs. Per
100 Pcs.
152
256
No. 9113S
RUS listed
* "S" Indicates gray glaze insulators
CLAMPS, BONDING
Bonding Clamps make a dependable mechanical and electrical pressure
contact between guy strand and anchor rod, when the guy is part of the
grounding system. Used on Thimbleye and Angle-Thimbleye bolts to keep
hardware-to-guy contacts tight. Also used to prevent excessive wear on
guy strands and protect galvanizing. Maintains electrical continuity.
For Power Installed Screw Anchors
Catalog
No.
G5067
G5068
G5069
C2030148
RUS listed
These can be used with SS (square Shaft) and RR (round rod) anchors.
DECEMBER 2008
5-20
POWER SYSTEMS, INC.
CLAMP, GROUND
Connection is soldered to the cable sheath and mechanically clamped to
the messenger wire. The bolt can be removed so that the clamp can be
dropped over the messenger. Hot dip galvanized.
Catalog
No.
7956
No. 7956
Steel Size
3/16 x 13/4
Length
13/4
Bolt Size
1/2 x 13/4
Approx. Ship
Wt. Lbs.
Per 100 Pieces
61
"J" Type
Catalog
No.
5450
Approx. Ship
Wt. Lbs.
Per 100 Pieces
39
Bayonet
Hole Spacing
15/16"
CLAMP, GUY
Parallel grooves trap strand tightly without marring. Plate halves align
evenly for easy application. Each bolt has a shoulder to prevent turning
while tightening. Hot dip galvanized.
No. 6461
5/8"
Catalog
No.
6460
*6461
6462
No. of
Bolts
3
3
2
Length
6
6
4
1/2"
Catalog
No.
6448
6449
*6450
No. of
Bolts
2
3
3
Clamp Bolts
Dimensions in Inches
Width
21/8
121/32
121/32
Accepts
Strand Size
3/8 thru 5/8
5/16 thru 1/2
5/16 thru 1/2
Ship Wt.
Lbs. Per
100 Pcs.
390
252
178
Accepts
Strand Size
1/4 thru 7/16
1/4 thru 7/16
1/4 thru 7/16
Ship Wt.
Lbs. Per
100 Pcs.
132
162
228
Clamp Bolts
Dimensions in Inches
Length
33/8
4
6
Width
19/16
19/16
19/16
RUS listed
*NEMA Standard
DECEMBER 2008
5-21
POWER SYSTEMS, INC.
Catalog
No.
6409
6410
Approx.Ship
Wt. Lbs.
Per 100 Pcs.
135
172
Dimensions in Inches
Bolt
Dia.
1/2
5/8
Length
31/4
4
Width
11/2
15/8
Strand Size
3/16 thru 5/16
5/16 thru 1/2
No. 6409
RUS listed
Catalog
No.
9000
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
17
Dimensions in Inches
Length
1
Width
1
Strand Size
1/4 thru 7/16
No. 9000
RUS listed
CLAMPS, SUSPENSION
Clamps are used with through bolts to support cable at poles. Through
bolt also serves as clamping member. One or more nuts and/or washers
are used between the pole and clamp for required spacing. No. 7901 is
used on very light cables. This one bolt clamp consists of the two clamping
members only. Nos. 7902L and 7902R are used at corners and angles.
Nos. 7903 and 7904 are used on straight runs.
Catalog
Number
7901
7902L
7902R
7903
*7903L
7904
Type
1-Bolt
Straight Susp
3-Bolt
Angle Susp.
3-Bolt
Angle Susp
3-Bolt
Straight Susp.
3-Bolt
Straight Susp.
3-Bolt
Straight Susp.
Accommodates
Strand Size
1/4 thru 7/16
1/4
thru 7/16
thru 7/16
1/4
thru 7/16
1/4
thru 7/16
Dimensions
in Inches
Approx.
Ship
Wt. Lbs.
Center
Hole Dia.
11/16
11/16
232
13/16
232
55/8
11/16
178
55/8
11/16
177
55/8
13/16
212
Length
21/2
No. 7902R
No. 7903L
DECEMBER 2008
5-22
CLEVIS, DEADEND
There is no need for a cotter pin because the lip on the clevis locks the
pin. An elongated slot in the upper arm lets the pin float into position.
Steel parts are hot dip galvanized. Wet-process spool insulator is gray
Sky-Glaze color. Shipped unassembled.
13/4"
Catalog
No.
H14
23/8"
No. H14
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
41
Description
Clevis, with Sq. Hole for 3/8" Carriage Bolts
and pin only (insulator not included)
CLEVIS DEADENDING
Used for attaching deadend insulators and guys with extension links
(Page 5-32). Clevises have 5/8" cotter bolts, except No. 456 which has
a 3/4" machine bolt. Hot dip galvanized.
Dimensions in Inches
Catalog
No.
455
No. 455
Extension
33/4
Mtg. Hole
Diameter
13/16
Throat
Clearance
5/8
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
98
Steel
Size
3/16 x 11/2
4"
4"
11/ "
16
x 25/32"
OVAL HOLE
5/ "
8
1 x 1/2" x 1/8"
STEEL CHANNEL
COTTER BOLT
DIA.
HOLE
1/ "
4
x 11/2" STEEL
5"
11/ "
16
11/ "
16
x 3/4"
OVAL HOLE
2"
3/ "
8
COTTER BOLT
5/ "
8
3/ "
16
11/2"
STEEL
x 7/8"
OVAL HOLE
COTTER BOLT
C9091831
PORCELAIN
SPOOL INSULATOR
11/ "
16
31/2"
SQUARE
HOLE
23/4"
41/4"
11/ "
16
31/4"
NEMA 53-4
PORCELAIN
SPOOL INSULATOR
NEMA 53-2
PORCELAIN
SPOOL INSULATOR
41/16"
35/16"
COTTER BOLT
5/ "
8
COTTER BOLT
NEMA 53-3
PORCELAIN
SPOOL INSULATOR
5/ "
8
31/4"
OVAL HOLE
3/ "
16
x 11/2" STEEL
NEMA 53-1
PORCELAIN
SPOOL INSULATOR
23/8"
1/ "
2
COTTER BOLT
*NEMA Standard
CHANCECENTRALIA, MISSOURI
AUGUST 2011
HUBBELL
Power Systems
5-23
POWER SYSTEMS, INC.
5"
NEMA 53-2
PORCELAIN
SPOOL
INSULATOR
41/2"
4"
NEMA 53-2
PORCELAIN
SPOOL INSULATOR
11/ "
16
x 11/8"
SLOT
HOLE
11/ "
16
DIA.
HOLE
31/4"
3/ "
16
x 11/2"
STEEL
5/ "
8
1/ "
4
x 11/2"
STEEL
COTTER BOLT
4"
9/ "
16
DIA.
2
HOLES
6"
5/ "
8
COTTER
BOLT
NEMA 53-5
WET PROCESS
PORCELAIN
SPOOL INSULATOR
31/4"
31/4"
COTTER BOLT
NEMA 53-4
PORCELAIN
SPOOL
INSULATOR
33/8"
NEMA 53-2
PORCELAIN
SPOOL
3"
31/4"
41/4"
5/ "
8
3/ "
16
x4" STEEL
COTTER
BOLT
1/ "
4
x11/2" STEEL
5/ "
8
5/ "
8
COTTER BOLT
COTTER BOLT
*NEMA Standard
NEMA 53-2
INSULATOR
No. C2070072
No. 8795
Description
Sagger Bracket Less Insulator
Sagger Bracket Less Insulator
Description
Clevis less insulator
DECEMBER 2008
5-24
POWER SYSTEMS, INC.
Description
Clevis & Mounting Bracket
Less Insulator
Clevis Only Less Insulator
& Mounting Bracket
RUS listed
No. 1948M
CLEVIS, THIMBLE
Standard
Combines a steel-attachment clevis with a wire-rope thimble. Thimble
has 2" diameter wire groove for deadending strand and swings free
for flexibility. Hot dip galvanized.
Catalog
No.
573
Dimensions In Inches
Steel
Cotter Bolt
Gauge
Diameter
5/8
10
Approx.
Ship Wt. Lbs.
Per 100 Pcs.
94
No. 573
DECEMBER 2008
Approx. Ship
Catalog
Size of
Wt. Lbs.
No.
Strand, In. Per 100 Pcs.
1/2
6484
56.3
5/8
6485
111
No. 6485
5-25
POWER SYSTEMS, INC.
EYENUTS, STANDARD
Most commonly used for deadending, back-guying, and attaching pole
head guys on the threaded ends of crossarm bolts. Drop-forged hot
dip galvanized steel.
Catalog
No.
6500
6501
*6502
6503
For Bolt
Dia
1/2
5/8
5/8
3/4
Dimensions In Inches
A
11/4
11/4
13/8
13/8
C
11/8
11/8
11/2
11/2
1/2
1/2
1/2
1/2
D
11/8
11/8
13/4
13/4
E
21/8
21/8
21/2
21/2
F
25/8
25/8
3
3
Approx.Wt.
Lbs. Per
100 Pcs.
51
46
51
54
*NEMA Standard
RUS listed
No. 6502
EYENUTS, THIMBLEYE
For attaching to thru-bolts or threaded end of straight or angle-Thimbleye bolts for straight-away head guys. Drop-forged galvanized steel.
Nuts are contoured to minimize bending and kinking of guy strand.
Dimensions In Inches
Catalog
No.
6510
*6511
Tapped
For
5/8 Bolt
3/4 Bolt
A
11/2
11/2
B
11/2
11/2
7/8
7/8
D
13/8
13/8
E
17/8
17/8
F
31/4
31/4
1/4
1/4
Approx.Wt.
Lbs. Per
100 Pcs.
78
72
*ANSI Standard
RUS listed
No. 6510
EYENUTS, TWINEYE
Used for head or stub guying of two strands, Twineye Nuts can be
attached to thru-bolts or threaded end of straight or angle Thimbleye
bolts. Grooves are contoured to protect guy strands. Drop-Forged
galvanized steel.
Catalog
No.
6560
6561
*6562
Dimensions In Inches
Tapped
For
A
B
C
D
E
5/8 Bolt
17/8 111/16 11/8 15/16 23/8
3/4 Bolt
17/8 111/16 11/8 15/16 23/8
1" Bolt 17/8 111/16 11/8 15/16 23/8
and PISA
F
35/8
35/8
35/8
5/16
5/16
5/16
Approx. Ship
Wt. Lbs. Per
100 Pcs.
190
184
188
No. 6562
*Cat. No. 6562 1" eyenut fits both 1" and 3/4" PISA rods.
DECEMBER 2008
5-26
POWER SYSTEMS, INC.
No. 0100
Dimensions In Inches
Mtg.
Catalog For Bolt Bolt
Dia.
C
D
E
F
G R
No.
Hole A B
5/8
11/16
0100
11/2 11/16 13/16 15/8 21/2 21/2 9/32
3/4
13/16
0101
11/2 11/16 13/16 15/8 21/2 21/2 9/32
Approx.Wt.
Lbs. Per
100 Pcs.
120
132
RUS listed
EYES, THIMBLEYE
Used on ordinary machine bolts for straight-away guys. Rounded
groove protects guy strand from sharp kinks and bends. Drop-forged
galvanized steel. Construction for high strength applications.
Catalog
No.
6519
6520
For
Bolt
Dia
5/8
3/4
Dimensions In Inches
Mtg.
Bolt
Hole
A
B
C
D
E
11/16 x 1 21/16
11/2 15/16 29/16 21/16
13/16 x 11/8 21/16
11/2 15/16 29/16 21/16
F
45/16
45/16
Approx.Wt.
Lbs. Per
100 Pcs.
123
130
No. 6519
No. 653112
Catalog
No.
C2030450
6531
653112
6532
6533
6534T
6535
C2030451
Length,
Feet
8
5
8
5
8
5
8
8
Inside Dia.
Inches
3/4
11/8
11/8
23/16
23/16
33/16
33/16
311/16
RUS listed
Mounting Straps
No. 6538
Catalog
No.
6538
6539
6540
C2030455
C2030456
RUS listed
DECEMBER 2008
Used With
Guard No.
6531 & 653112
6532 & 6533
6534T & 6535
C2030450
C2030452
C2030451
Dimensions in Inches
Steel Size
1/8 x 3/4
1/8 x 3/4
3/16 x 1
3/32 x 3/4
3/16
x 1
Hole Dia.
9/32
9/32
11/32
9/32
11/32
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
12.8
24.3
63.5
6.6
69
5-27
POWER SYSTEMS, INC.
Cable Guards
Catalog
No.
C2030033
C2030034
C2030035
Overall
Length
9'
9'
9'
Inside
Dia.
2"
3"
31/2"
No. C2030033
Cable Guard Extensions
5'
5'
C2030036
C2030037
1000
1400
17/8"
27/8"
2"
3"
Measurements
(Inches)
Nominal
Std.
Size
(Inches) H W T Length
1/2 1/2 1/16
1/
96
2
3/4 3/4 1/16
3/
96
4
1 1 5/64
96
1
96
11/2 11/2 11/2 5/64
Std.
Pkg.
50
50
50
25
Approx.
Wt. Per
100 Pcs.
48
76
96
227
K-S Straps
HUBBELL / CHANCE CENTRALIA, MISSOURI
Catalog Number
Length
Width
Thickness
Pcs. Per Ctn.
Wt. Per Ctn.
DECEMBER 2008
5-28
GUY MARKERS
HALF-ROUND MARKERS
Made from an MPO formulation, markers come in yellow only. They resist whitening and have high impact resistance. Markers dont become brittle when cold.
They cover completely from the ground up. Markers attach to any 3/16" to 3/4" guy
strands. Clamps are located at top, middle and lower end of marker.
Each PBG is furnished with a one-bolt hardware clamp at the lower end to fit all
types of guy attachments and two one-bolt strand clamps at the middle that adapts
to fit guy wires from 3/16" through 3/4".
Dimensions
Strand
Range
3/16" thru 3/4"
3/16" thru 3/4"
Width
2"
2"
Length
84"
96"
Hardware Clamp
Std.
Pkg.
12
12
Wt. Per
100 Pcs.
150
175
Bright, high visibility markers neither bleach out to white nor crack from cold temperatures. Made of ultraviolet-stabilized high-density polyethylene, overlapping
tube-like design offers full-length coverage.
Easy installation requires no tools. Replaceable standard tie strap allows the markers to be reused. Three holes permit the black self-locking nylon strap (furnished) to
secure the lower end in a choice of two attachment methods either above or over
the anchor rod, illustrated below. This fastening design eliminates the cutaway
section that would weaken its resistance to breaking.
The economy marker is available in high visibility 8' long,
11/8" O.D., bright yellow sections.
ORDERING INFORMATION
Dimensions
Catalog
Number
96FRPE
Length
8 ft.
Dia.
11/8"
Color
Bright Yellow
Per Carton
Weight per
100 pcs.
Units
96 lbs.
25
DECEMBER 2008
5-29
POWER SYSTEMS, INC.
ORDERING INFORMATION
Catalog Number
Gray
96FRPMGRY
Yellow
84FRPMYEL
96FRPMYEL (1)
C0790263*
Dimensions
Green
84FRPMGRN
96FRPMGRN
Orange
84FRPMORG
96FRPMORG
Length
84"
96"
96"
Dia.
1.5"
1.5"
1.5"
Strand
Range
3/16" thru 1/2"
3/16" thru 1/2"
3/16" thru 1/2"
Std.
Pkg.
Wt. Per
100
Pcs.
240
Std.
Pkg.
20
20
20
Wt. Per
100 Lbs.
105
120
120
21/2" Diameter
Dimensions
Catalog
Number
Color
Length
Dia.
T0790228
Yellow
96"
21/2"
Strand
Size
3/16"
thru 1/2"
Flame Retardant
Catalog Number
Yellow
84FRPMRYEL
96FRPMRYEL
Dimensions
Length
84"
96"
Dia.
1.5"
1.5"
Strand
Range
3/16" thru 1/2"
3/16" thru 1/2"
Per Carton
Std.
Wt. Per
Pkg.
100 Pcs.
20
20
105
120
RUS listed
DECEMBER 2008
5-30
POWER SYSTEMS, INC.
HANGER
FIGURE 8 CABLE
Description
Hook and Clamp
No. PS9015
HANGERS, MESSENGER
UNIVERSAL TYPE
Catalog
No.
7911
Steel Size
1/2 x 2
Strand Size
5/16 to 1/2
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
370
No. 7911
Hooks used to attach wedge type service drops and deadend clamps to
crossarms, poles or buildings. No. C2050190 Drive Hook is furnished
with 7/16" fetter drive threads and a pilot point for easy starting. No.
0317 Screw Hook has 3/8" gimlet threads.
Catalog
No.
C2050190
0317
Dimensions in Inches
Thread Dia.
7/16
3/8
Length
21/2
2
Overall Length
43/4
4
No. C2050190
HOOKS, GUY
No. 0317
Keeps guy wire from creeping downward when pole is guyed sharply.
Nos. 5001 and 5004 are used for storm guying. Hooks should be used
under bolt heads for maximum shear strength.
Catalog
No.
Description
5001 2-Bolt Storm
5004 1-Bolt Storm, 3/4"R
6584 1-Bolt Standard
Material
Size, Inches
1/4 x 11/2 x 7
1/4 x 11/2 x 41/8
7/16 x 13/4 x 4
Hole Dia.
Inches
9/16 & 13/16
11/16
11/16
Approx. Ship
Wt. Lbs.
per 100 Pcs.
108
79
78
RUS listed
No. 6584
No. 5004
Type
2 Bolt
1 Bolt
GH6ILS
GH6
RUS listed
DECEMBER 2008
5-31
POWER SYSTEMS, INC.
7/
8"
Dia. Steel
IRONS, PULLING IN
Provides a strong and easy-to-get-at attachment for the pulling-in
blocks when installing or removing cables. Pulling-in irons are set into
the brick or concrete walls of street vaults opposite all duct entrances.
Hot dip galvanized.
Catalog
No.
8119
8120
Dimensions in Inches
Steel Size
7/8 Rd.
7/8 Rd.
A
9
12
B
83/8
107/8
Approx.Ship Wt.
Lbs. Per 100 Pcs.
540
580
RUS listed
5/ "
8
16"
0.69"
clevis
opening
dia. hole
No. C2070112
LINK, EXTENSION
The extension link is used to give additional clearance on deadends and
corners. The end clevis has a slotted hole for inserting the machine bolt
without having to remove the extension bar. Hot dip galvanized.
No. C2070065
11/
16"
dia. hole
Catalog
No.
C2070065
C2070112
T2070134
DC33B1
DC33B3
Hole to Hole
Length
20"
14"
5.5"
14"
10"
Extension
Bar Stock
5/16" x 11/2"
1/4" x 2"
1/4" x 2"
3/16" x 11/4"
3/16" x 11/4"
RUS listed
DECEMBER 2008
5-32
POWER SYSTEMS, INC.
BURIED
CABLE ROUTE
FT.
TO NEXT
CONNECTION
BEFORE DIGGING
CONTACT
ELECTRIC
COMPANY
CHANCE CAT.
C5540001
C5540001
BURIED
CABLE ROUTE
FT.
TO NEXT
CONNECTION
BEFORE DIGGING
CONTACT
TELEPHONE CO.
T5540196
BURIED
CABLE ROUTE
CONNECTION
CABLE TV
COMPANY
CHANCE CAT.
C5540001
ORDERING INFORMATION
Catalog No.
C5540001
T5540196
Weight
2 lbs. 13 oz.
2 lbs. 13 oz.
BURIED
CABLE ROUTE
CONNECTION
Insert Area
CHANCE CAT.
C5540001
DECEMBER 2008
5-33
POWER SYSTEMS, INC.
For
Year
2007
2008
2009
2010
Length
Inches
21/2
21/2
21/2
21/2
NUTS
Made to give tight connections. Galvanized.
M-F Curved Lock Nuts
Catalog
No.
3510
3511
3512
Bolt Size,
Wt. Lbs.
Inches
Per 100 Pcs.
3/8
1.25
1/2
2.6
5/8
4.44
Catalog
No.
3513
3514
Wt. Lbs.
Bolt Size,
Per 100 Pcs.
Inches
3/4
6
7/8
8.5
No. 3530
No. 3510
Catalog
No.
3530
3531
3532
3533
Dimensions in Inches
Bolt Size
3/8
1/2
5/8
3/4
Width
5/8
13/16
1
11/8
Height
.160
.190
.224
.246
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
.39
.92
1.34
1.73
Washer Nuts
Catalog
No.
*3194
No. 3194
55083P
Dimensions in Inches
Bolt Size Washer Dia.
5/8
21/2
Sq. Size
15/16
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
38
For Bolts
Regular Square Nuts
For Rods
Heavy Square Nuts
RUS listed
*ANSI B18.2.2
DECEMBER 2008
5-34
POWER SYSTEMS, INC.
PINS
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
Dimensions in Inches
Catalog
No.
5/8
*881
*881A
*883
*884
*PS890
C2060266
C2060294
5/8
5/8
3/4
5/8
5/8
180
192
196
184
264
290
340
103/4
111/2
121/2
113/4
121/2
135/8
155/8
5
5
6
6
6
77/8
77/8
2
2
2
2
21/2
3
3
5/8
MF lock nut
A
No. 881A
5/8
*886
*PS887
*PS893
2
2
21/2
5/8
3/4
124
136
184
61/2
71/2
73/4
5
6
6
*NEMA Standard
RUS listed
PINS
A
5
6
B
61/2
61/2
3/4
3/4
D
21/2
21/2
F
25/8
25/8
7/8
7/8
Approx. Ship
Wt. Lbs.
Per 100 Pieces
232
276
4717
*4326
4328
*4332
7
7
8
10
7
7
7
7
5/8
3/4
3/4
3/4
21/2
3
3
31/2
3
3
3
31/2
1
1
1
11/8
377
450
460
558
*NEMA Standard
RUS listed
DECEMBER 2008
5-35
POWER SYSTEMS, INC.
Nylon threads are an alternative to lead threads on Chance steel insulator pins. These forged steel pins are hot-dip galvanized. Available on
5/ " dia. shanks. Furnished with one each, 2" x 2" x 1/ " square washer,
8
8
square nut and curved lock nut.
Catalog
No.
2"
B
C
*886P
*887P
5 "
8
11/2
11/2
5
6
11/4
11/4
124
136
*NEMA Standard
RUS listing applied for.
Crossarm
Size
4x5
Roofed
Catalog
No.
PS8779
Dimensions in Inches
Pin Height
Above
Bolt
Crossarm
Size
5/ x 7
5
8
Thread
Size
1
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
315
No. PS8779
Thread
Size
1"
13/8"
Height Above
Crossarm
5 3 /4
63/4
Crossarm
Size
33/4 x 43/4
33/4 x 43/4
Ship. Wt.
Lbs., 100 Pcs.
600
792
RUS Listed
No. 14322
HUBBELL / CHANCE CENTRALIA, MISSOURI
DECEMBER 2008
5-36
POWER SYSTEMS, INC.
Catalog
No.
4258
Thread
Dim.
1"
Dimensions in Inches
Mach.
For Max.
Overall
Bolt
Stud
Length
Diameter
Length
5/8
51/4
3
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
82
No. 4258
RUS listed
Catalog
No.
875
PS888
Shank
Dia.
1/2
5/8
Dimensions in Inches
Height
Base
Above
Dia.
Arm
13/4
6
2
5
Overall
Length
9
8
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
110
120
No. 875
Hot dip galvanized pressed steel, 1' lead thread. When no A dimension
is given, the pin has two mounting holes only.
Catalog
No.
Dimensions in Inches
A
B
No. 2170
Straight Base Pin
15
18
18
21
20
20
24
24
24
3
2
3
3
5
5
8
5
8
5
6
5
5
268
320
332
460
408
416
550
600
530
*NEMA Standard
RUS listed
20
24
8
8
A
B
C2060271
Offset Base Pin
541
541
21
580
DECEMBER 2008
5-37
POWER SYSTEMS, INC.
Ordering Information
Catalog
Number
*2162P
*2170P
C2060106P
2199P
*2174P
2171P
21971P
*C2060140P
Dimensions in inches
L A B
15 - 5
18 3 5
18 - 8
20 - 8
20 3 5
24 2 6
24 3 5
24 3 5
Cross Reference
Hubbell
2162P
2170P
C2060106P
2199P
2174P
2171P
21971P
C2060140P
Joslyn
J715Z
J13682
J740Z
J1220Z
J7442
Hughes Brothers
2770-B15-100
2770-B15-C5-100
2770-B18-100
2770-A20-100
2770-A20-C5-100
2770-A24-100
2770-A24-C5-100
*NEMA Standard
RUS listing applied for
Dimensions in Inches
Steel
Crossarm
Hole
Thickness
Size
Dia.
3/16
13/16
4x5
1/4
15/16
6x8
13/16
33/4 x 43/4
7 Ga.
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
166
276
115
No. 4063
RUS listed
.62
4.38
11 "
16
Holes
11 "
16
Slots
x 312"
Center-Suspension Type
Attached to the crossarm through the slots provided. Suspension attachment is made through center hole. Hot dip galvanized.
Catalog
No.
5819
Dimensions in Inches
Overall
Steel
Length
Size
1/4 x 4
17
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
460
No. 5819
RUS listed
Dimensions in Inches
Overall
Steel
Length
Size
1/2 x 4
24
RUS listed
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
1200
2 1.87
4.62
13 "
16
Holes
13 "
16
x 312"
Slots
No. 5844
DECEMBER 2008
5-38
POWER SYSTEMS, INC.
Description
2-Hole Lift
2-Hole Lift
3-Hole Lift
3-Hole Lift
Plate Size,
Inches
3/16 x 21/2 x 7
1/4 x 21/2 x 7
3/16 x 21/2 x 7
1/4 x 21/2 x 7
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
98
126
97
126
RUS listed
PLATES, STRAIN
Strain Plates are used to prevent pole from being damaged by guy wire.
Nail holes at corners are 3/16" diameter. Hot dip galvanized steel plates
are formed to 5" radius.
No. 6575
Catalog
No.
*6575
RUS listed
*NEMA Standard
Type
Standard
Dimensions,
Inches
4 x 8 x 14 Ga.
RACKS, SECONDARY
Medium and Heavy Types
These racks have fabricated steel points that are permanently welded
to the rack bases. The entire unit is hot dip galvanized.
Insulators are not included.
Catalog
No.
Dimensions in Inches
Overall
No. of
End Mtg.
Width
Wires Hole Spacing Length., Back
of Back
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
2
3
4
16
24
32
18
26
34
27/8
27/8
27/8
460
660
880
3
4
16
24
213/4
293/4
31/4
31/4
700
1020
DECEMBER 2008
C2070052*
3
*ANSI Standard
24
26
31/4
800
5-39
Channel-Steel Types
Racks
C2031124
C2031125
C2031126
Hook
C2031131
Hook
C2031132
Cable Racks
Hot dip galvanized racks with hook holes 11/2" apart. Fasten to manhole
or interior walls with 1/2" x 4" expansion bolts (not included). Mounting
slots 5/8" x 3/4" at top and bottom of 15", 24" and 30" lengths overlap for
assembly in combinations for overall length desired.
11/2" x 9/16" x 3/16" Channel Steel
Catalog
Number
C2031124
C2031125
C2031126
C2030313
C2030314
No. of
Hook Holes
8
14
18
37
47
Dimensions
B
A
131/2"
15"
221/2"
24"
281/2"
30"
551/4"
701/4"
Wt. Per
100 Pcs.
162
230
280
570
720
For extra clearance from wall, see Supports, Cable Rack, Page 5-43.
RUS listed
Hook
C2031133
Hook
C2030317
Hook
C2030315
Racks
C2030313
C2030314
Hook
C2030316
234"
Catalog
Number
C2031131
*C2030502
C2031132
*C2031128
C2031133
*C2031127
C2030317
C2030315
*C2030499
C2030316
*T2030500
12332"
Channel Steel
Size, Inches
11/2 x 11/8 x 3/16
1
1 /2 x 11/8 x 3/16
11/2 x 11/8 x 3/16
11/2 x 11/8 x 3/16
11/2 x 11/8 x 3/16
11/2 x 11/8 x 3/16
11/2 x 21/16 x 13/64
11/2 x 135/64 x 3/16
11/2 x 135/64 x 3/16
11/2 x 135/64 x 3/16
11/2 x 135/64 x 3/16
Wt. Per
100 Pcs.
42
42
96
108
116
136
175
204
204
260
260
RUS listed
*Plasticized PVC coated
1916"
3"
112"
Length from
Face of Rack
4"
4"
71/2"
71/2"
10"
10"
10"
14"
14"
18"
18"
Radius
11/2
Dimensions in Inches
Length Along Hook
3
Width
23/4
No. C2031120
Material
Galvanized Steel
Size,
Inches
18 Ga. x 3/8
No. L1100
DECEMBER 2008
5-40
POWER SYSTEMS, INC.
Made from 4" x 119/32" x 3/16" channel steel. Hot dip galvanized. Either expansion or anchor bolts can be used to mount them to the vault wall. Pressed-steel
hooks have stops to keep insulators from sliding off. Mounting holes 3/4" on
all except C2030047 which has 5/16" mounting holes.
Cable Racks
Dimensions in Inches
Approx. Ship.
Catalog
No. of
Hook Slot
Overall
Mtg. Hole
Wt. Lbs.
No.
Slots
Spacing
Length
Spacing
Per 100 Pcs.
R1473
3
8
24
16
1000
R1474
4
8
32
24
1400
R1476
6
8
48
40
2100
*C2030047
6
8
48
223/8 & 40
2000
*Same as R1476 except three mounting holes...lower two slotted.
Steel
Size
12 Ga.
12 Ga.
Approx. Ship.
Wt. Lbs.
Per 100 Pcs.
244
340
Radius
for Cable
25/8
Dimensions in Inches
Overall
Overall
Length
Width
41/2
25/8
Approx. Ship.
Wt. Lbs.
Per 100 Pcs.
134
5-41
POWER SYSTEMS, INC.
334
Cable Racks
Catalog
No.
PS1225
No. of
Hook
Holes
14
Dimensions in Inches
Overall
Hook Hole
Mtg. Hole
Length
Spacing
Spacing
271/2
11/2
251/2
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
840
234
A
214
Dimensions in Inches
Extension from
Steel
Rack Face
Size
6
9 Ga.
101/2
7 Ga.
15
7 Ga.
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
164
308/340
550/620
Catalog
No.
1121
1118
Radius
for Cable
R
25/8
11/2
Dimensions in Inches
Length
along Hook
A
Width
33/4
33/4
3
33/4
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
138
112
Supports extend cable rack away from wall in order to avoid obstructions, escape water seepage, or because of limited space. Mounting
holes take 1/2" bolts. Hot dip galvanized. Two supports required to
mount each rack. See Racks, Underground Cable, above.
A
Catalog
No.
1101
1102
A
35/8
69/16
Dimensions in Inches
Mtg. Hole Steel
B
C
Size
Size
9/16
1 /2 x 1
41/4 21/4
9/16
1/2 x 11/4
53/4 23/8
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
110
252
B
9 "
16
x 34"
No. 1101
DECEMBER 2008
5-42
POWER SYSTEMS, INC.
Catalog No.
Standard
With
DriveElectroHead
Brazed
BoltStandard
Pigtail
Type
8565
8566
8576
8578
C2030107 C2030377
T2030427
8580
8618
C2030109
8620
Pigtail
Approx.
Length,
Inches
28
18
48
48
15
Approx.
Ship Wt.
Dia., Length Lbs. Per
Ft.
100 Pcs
Inches
1/2
5
340
1/2
5
340/350
1/2
6
400
5/8
6
600/626
5/8
8
800/860/820
5/8
7
5/8
10
1000
3/4
8
1200/1220
3/4
10
1460
10
2670
1
5/8
15
1620
RUS listed
ROD, GROUND,
SECTIONAL GALVANIZED
Made of high-carbon steel as standard. All rods have a 5/8" cut thread
on top and bottom. Hot dip galvanized.
Cat. No
C2030227
C2030052
8512
8609
8611
C2030453
C2030430
C2030458
Description
Cone Point with 5/8" Thread
Cone Point with 5/8" Thread
Cone Point with 5/8" Thread
Extension, 5/8" Thread, both ends
Coupling for above
Threadless Sectional Rod
Threadless Sectional Rod
Threadless Coupling
Approx. Ship
Dimensions
Wt. Lbs.
Dia. Length Per 100 Pcs.
5/8"
5'
520
5/8"
8'
860
5/8"
10'
1043
5/8"
6'
625
5/8"
2"
18
5/8"
8'
800
5/8"
10'
1000
5/8"
150
RUS listed
DECEMBER 2008
Rod Dia.
Inches
5/8
3/4
Wire Dia.
Min.
.128
.128
Wire Dia.
Max.
.460
.460
Wt. Per
100 Pcs.
34
30
5-43
POWER SYSTEMS, INC.
SCREWS, LAG
Lag Screws of 1/4", 3/8" and 1/2" diameter have upset shoulders. Hot dip
galvanized.
Gimlet Point Type
Approx.
Dimensions
Ship.
Catalog
in Inches
Wt. Per
No.
Dia. Length 100 Pcs
872112GP 1/4
11/2
2
1/4
8722GP
2
3.2
872212GP 1/4
21/2
4.4
1/4
DF1L3
3
5.6
3/8
DF3L3
3
9
Approx.
Dimensions
Ship.
Catalog
in Inches
Wt. Per
No.
Dia. Length 100 Pcs
3/8
508743
3
10.4
3/8
508744
4
13.6
1/2
508753
3
19.6
508754 1/2
4
24
5087541/2 1/2
41/2
27
508755 1/2
5
28
1/2
22.8
RUS listed
SHACKLES, ANCHOR
A
1/2
Dimensions in Inches
B
D
E
C
5/8
3/4
21/2
15/8
RUS listed
D
C
No. 5801
Description
Pole Plate
End Fitting w/Clamp
End Fitting w/Double Clamp
Pipe,
Inches
2
2
2
RUS listed
Approx. Ship.
Wt. Lbs.
Per 100 Pcs
455
495
620
No. 0512
DECEMBER 2008
5-44
POWER SYSTEMS, INC.
SLEEVES, SERVING
For holding down the loose end of guy strand projecting beyond the guy
clamp. Chance Serving Sleeves, which have a flared end to speed application, are faster to apply than wire-wrap sleeves. Hot dip galvanized.
No. 6456
Strand
Cat.
Size
No. Inches
1/4
6452
5/16
6453
Approx.
Ship
Length, Wt. Lbs.
Inches Per 100
Overall
Pcs.
13/8
2.8
11/2
5.9
RUS listed
Strand
Cat.
Size
No. Inches
3/8
6454
7/16
6455
1/2
6456
Approx.
Ship
Length, Wt. Lbs.
Inches Per 100
Overall
Pcs.
13/4
7.3
2
12
21/4
13
SPACER, PIPE
Used with No. 2157 Pole Top Pin Brackets for greater rigidity.
No. 2237
DECEMBER 2008
Catalog
No.
2237
Description
Spacer
Length,
Inches
11/2
Pipe,
Inches
3/4 I.D.
Approx.
Ship
Wt. Lbs.
Per 100 Pcs.
16
RUS listed
5-45
POWER SYSTEMS, INC.
Staples
Used to secure ground
wire and ground wire
molding to wood poles.
RUS listed
* ANSI Standard
RUS Listing Pending
FINISH
Staple
Type
Barbed
Square
Shank,
Cut Point
Dimensions
(Inches)
Length x Inside
Width x
Wire Dia.
ELECTRO ZINC
Catalog No.
GALVANIZED
Catalog No.
COPPER COATED
Catalog No.
BRIGHTWIRE
Catalog No.
C2050460
1750/350
1.4
C2050461
1.9
1300/260
C2050463
3.2
800/160
C2050462
8.3
300/60
2 x 3/8 x .131
2 x 5/8 x .165
3 x 1-1/16 x .218
1 x 1/4 x .114
1 x 5/16 x .120
7511
1000/100
0.5
C2050213
1000/100
0.5
Rolled
(Diamond)
Point
C2050207
1000/100
1.4
C2050214*
1000/100
1.4
C2050208
1000/100
1.5
7512
2.2
1000/100
C2050209
2.3
1000/100
C2050210
3.2
1000/100
7513
3.1
1000/100
C2050215*
1000/100
1.5
C2050216*
2.2
1000/100
C2050217
2.3
1000/100
C2050218
1000/100
3.2
C2050219*
1000/100
3.1
7522
500/100
8.0
C2050211
500/100
8.0
C2050212
250/100
9.5
C2050220
500/100
8.0
C2050221
8.0
500/100
C2050222
250/50
9.5
3 x 1-1/2 x 1/4
3-1/2 x 1-3/4 x 1/4
(Slash)
Point
Sold by the Pound
C2050224
0.6
5000/500
C2050225
1.2
2500/500
C2050235
1.4
1000/100
9153
1.4
9154
2.2
1000/100
C2050226
2.3
1000/100
C2050229
3.1
1000/100
C2050227
1000/100
3.4
C2050230
1000/100
4.0
C2050232
500/100
8.0
9161
8.0
500/100
C2050233
8.0
500/100
C2050237
1000/100
2.2
C2050242
500/100
8.0
C2050245
0.7
6700/NA
C2050244
2.0
3100/NA
Cut
C2050223
0.5
5000/500
2500/500
3 x 1-1/16 x 1/4
C2050464
1.7
1500/300
751134
3600/NA
2.0
C2050247
3600/NA
2.0
9167
2.0
2900/NA
9169
2.0
2200/NA
DECEMBER 2008
5-46
POWER SYSTEMS, INC.
STEPS, POLE
Steps are made from hot-rolled open-hearth steel. Hot dip galvanized.
Standard Drive Hook type has fetter drive thread and pilot point for
easy starting.
Catalog
No.
*506125
Type
Head
Hook
Approx. Ship
Wt. Lbs.
Per 100 Pieces
92
Size
Inches
5/8 x 10
No. 506125
*NEMA Standard
Detachable Type
No.6235
No.PS6236
Description
Lag & Plate
Step
PLATE
No. T2050425
*NEMA Standard
BOLT
58
122
Description
Ladder-Rung step
As installed
Catalog No.
J600007
Description
Standard step
STRAP, REINFORCING
R D
DECEMBER 2008
Dimensions in Inches
A
R
D
11/16
7/8
11/16
W
11/2
No.7905
11 GAUGE
A
W
5-47
POWER SYSTEMS, INC.
A
B
No. 5432
Catalog No.
5432
5433
5434
Dimensions in Inches
For Pole Diameter
Steel Size
5/8
8 to 10
5/8
10 to 12
5/8
12 to 14
A
113/4
133/4
153/4
B
6
6
6
C
4
4
4
RUS listed
Cat.
No.
6593
Dim. in Inches
Approx.
Wt. Lbs.
Size of
Strand
Guy Rod Per 100
Size
Pcs.
Clearance
3/8
1/2 and 5/8
8.2
RUS listed
Cat.
No.
6594
6595
Dim. in Inches
Approx.
Wt. Lbs.
Size of
Strand
Guy Rod Per 100
Size
Pcs.
Clearance
1/2
5/8 and 3/4
15.6
5/8
1
40
TONGUE, DEADEND
This forged steel deadend tongue may be used with virtually all
strain insulator clevises and clevis type suspension insulators. Hot
dip galvanized.
Catalog
No.
C2030385
Dimensions in Inches
Approx. Ship Wt.
Length Hole Dia. Steel Size Lbs. Per 100 Pcs.
3/8
120
1x2
5
DECEMBER 2008
5-48
POWER SYSTEMS, INC.
WASHERS
Galvanized
Square Curved Washers
Catalog
No
*680912
*681012
PS6822
*682212
6823
*682312
6825
DF4W15
Spring Clip
Dimensions in Inches
Approx. Ship Wt.
Washer Size Hole Dia. Bolt Dia. Lbs. Per 100 Pcs.
15/16
7/8
4 x 4 x 1/4
120
11/16
5/8
21/4 x 21/4 x 3/16
31
11/16
5/8
21/2 x 21/2 x 3/16
36
13/16
3/4
3 x 3 x 1/4
66
7/8
3/4
3 x 3 x 1/4
62
11/16
5/8
3 x 3 x 1/4
62
13/16
3/4
31/4 x 3/1/4 x 1/4
76
13/16
3/4
4 x 4 x 3/16
82
Square Washers
*6811
*6812
*6813
*6814
6816
*6817
6818
*681812
*6819
681912
6820
2 x 2 x 1/8
2 x 2 x 1/8
21/4 x 21/4 x 3/16
21/4 x 21/4 x 3/16
3 x 3 x 3/16
3 x 3 x 1/4
4 x 4 x 3/16
4 x 4 x 1/4
4 x 4 x 1/4
4 x 4 x 1/2
4 x 4 x 1/2
9/16
1/2
11/16
5/8
11/16
5/8
13/16
3/4
13/16
3/4
13/16
3/4
13/16
3/4
7/8
3/4
15/16
7/8
13/16
3/4
11/8
13
12
24
23
51
64
87
120
118
236
228
Round Washers
*PS6801
*PS6802
*PS6803
*6805
*6806
1 O.D. x 14 Ga.
11/4 O.D. x 14 Ga.
13/8 O.D. x 12 Ga.
13/4 O.D. x 10 Ga.
2 O.D. x 9 Ga.
*NEMA Standard
RUS listed
DECEMBER 2008
7/16
9/16
9/16
11/16
13/16
3/8
3/8
1/2
5/8
3/4
1.64
2.84
4.50
8.50
11.80
Stock
5/32" x 1"
1/4" x 13/4"
1/4 x 13/4"
1/4 x 13/4"
1/8
7/16
3/8
11/64
x 3/32
x 1/8"
13/64 x 5/32
1/4 x 3/16
9/16
1/2
11/16
5/8
13/16
3/4
1.0
1.5
2.4
4.8
5/32"
x 1"
x 13/16"
7/32" x 13/8"
7/64" x 3/4"
3/16"
9/16
1/2
11/16
5/8
13/16
3/4
7/16
3/8
4
6.6
10.40
1.50
RUS listed
5-49
POWER SYSTEMS, INC.
WIREHOLDERS
C2070075
Catalog No.
Sky-Glaze
*C2070075
*C2070076
C2070076
Pipe Sizes
11/4", 11/2", 2", 21/2"
3", 31/2", 4
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
156
150
Wire Hole
1" Dia.
1" Dia.
*NEMA Standard
RUS listed
No. 0607
No. 0623
Catalog
Size of Screw
No.
or Bolt, Inches
0623 No. 22 x 21/4 Galv. Wood Screw
0607 No. 22 x 21/4 Galv. Wood Screw
0618 No. 14 x 11/2 Cadmiumplated Wood Screw
Approx.
Ship
Dimensions in Inches Wt. Lbs.
A
B C
D
Per 100 Pcs.
3 21/4 2 5/8 x 3/4
66
31/8 21/4 21/2
1
74
2 111/16 13/8
1/2
25
Reinforced Wireholders
Single-point wireholders are strong and compact. Heavy cup-base
and strap is a single steel stamping, to which the screw is rigidly assembled. Hot dip galvanized. Insulator and strap base are assembled
with solid-copper rivet.
No. 0618
x 112"
For use with triplex-type service cable, the No. 0192 Clevis takes one
NEMA 53-2 spool insulator. Insulators must be ordered separately.
212"
No. 24
Wood Screw
5/8"
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
68
72
76
Clevis-Type Wireholders
312"
3"
3
16
Hole
Dia. In.
1
1
1
RUS listed
No. 31144
314"
Catalog No.
31144
31145
31146
Size of Screw
or Bolt, Inches
No. 22 x 21/4 Galv. Wood Screw
No. 22 x 3 Galv. Wood Screw
No. 22 x 4 Galv. Wood Screw
Catalog No.
0192
For
Insulators
NEMA 53-2
Dimensions in Inches
Mtg. Screw
Steel
Size
Size
3/16 x 11/2
No. 24 x 31/2
Approx. Ship
Wt. Lbs.
Per 100 Pcs.
142
RUS listed
DECEMBER 2008
5-50
POWER SYSTEMS, INC.
Wireholders
INSTALLING TOOL
Catalog No. C2070143
LAG-SCREW WIREHOLDER
Catalog No. C2070138, C2070139, C2070140
2.40
"A"
0.85
TOGGLE-BOLT WIREHOLDER
Catalog No. C2070141
1.10
"A"
1.40
1.35
2.40
.50
1.35
0.82
2.00
Screw-Type Wireholders
Catalog
Number
Screw
Diameter
(inches)
"A"
Length
(inches)
Approx. Wt.
(lb. per
100 pieces)
C2070138
5/
Lag
21/4
24
C2070139
5/
Lag
23/4
26
C2070140
5/
Lag
33/4
28
33/4
28
16
16
16
C2070143
Tool
C2070144
Toggle-Bolt Wireholder:
5/
16
C2070141
RUS
UNC-2A
Listed
Clamp-Type Wireholders
Catalog
Number
Pipe
Sizes
(inches)
Approx. Wt.
(lb. per
100 pieces)
C2070144
11/4 21/2
114
C2070145
34
128
DECEMBER 2008
C2070145