Académique Documents
Professionnel Documents
Culture Documents
(where centrifugal force effects are neglible) cylindrical mechanical interference fit
assemblies of uniform cross section. It is based on Spotts (seventh edition), 12-2, "shrink and press fit stresses." For a thin-walled cylinder (i.e., wall thickness < 0.1 times its smaller radii of
curvature), the radial and tangential stresses, R and T respectively, are approximately uniform throughout the cross section; therefore, there is negligible change in radial wall section (i.e., radial
deflection of the inner and outer surfaces are about equal, and radial deformation of the mean circumference is computed based on the uniform hoop (tangential) stress. For a thick-walled
cylinder, the radial stress is not neglible, and tangential stress is not uniform throughout the cross section: Resulting stresses and deflections are computed per Roark and Young (sixth edition),
Table 32, Cases 1a. and 1c.
Problem description:
REQUIRED PROGRAM INPUTS (enter into red background cells)
for Inner Member:
for Outer Member:
min.
max.
nominal
min.
max.
nominal
Inner radius, Ri (ins.) 0.13821 0.13846 0.13834 0.19685 0.19713 0.19699
Outer radius, Ro (ins.) 0.19717 0.19744 0.19730
0.39370
Material Type, e.g., steel, alum., etc.
steel
Aluminum
Elasticity Modulus, E (psi)
29.7E+06
10.5E+06
Poisson's Ratio, (dmls.)
0.29
0.33
Minimum Tensile Strength (psi)
132,000
34,800
Length of interference fit, L (ins.)
0.988
Static Coefficient of Friction (dmls.)
0.200
Component type:
thick-walled cylinder
thick-walled cylinder
Ro
Ri, =0 if solid
inner member
CALCULATED OUTPUTS:
@ Min. Interference @ Max. Interference @ Nom. Interference
Conditions
Conditions
Conditions
Diametral interference (ins.) = 7.8740157480E-005
0.0011811024
0.0006299213
Pressure @ contact surface (psi) =
714
10711
5711
R @ contact surface (R max) =
-714
-10711
-5711
Axial Holding Force (lbs.) =
Torque Capacity (in-lbs) =
174.7
34.4
2622.3
517.0
1398.1
275.6
0.00004
0.00005
-0.00003
-0.00003
0.00054
0.00081
-0.00038
-0.00039
0.00029
0.00043
-0.00020
-0.00021
239
3570
1907
Ri_outer,
Ro_inner
outer member
777.1
11664.7 N
1191
17852
9525
-2097
-2811
-31369
-42081
-16754
-22465
0.141421
file: 273360577.xlsx
revision 01\ Nov. 10, 1998
page 1 of 4
Bushing
10.024/10.014
Housing
10.010/10.000
CALCULATED OUTPUTS:
0.00007
0.00011
-0.00005
-0.00005
0.00043
0.00064
-0.00030
-0.00031
477
2382
-4198
-5625
2857
14283
-25135
-33705
CALCULATED OUTPUTS:
Diametral interference (ins.) =
Pressure @ contact surface (psi) =
sR @ contact surface (sR max) =
Axial Holding Force (lbs.) =
Torque Capacity (in-lbs) =
0.00004
0.00005
-0.00003
-0.00003
0.00043
0.00064
-0.00030
-0.00031
239
1191
-2100
-2814
2857
14283
-25135
-33705
Bushing
10.015/10.006
CALCULATED OUTPUTS:
@ Nom.
@ Max. Interference Interference
Conditions
Conditions
0.0009448819
0.0005511811
8570
4998
-8570
-4998
1094.6
638.4
215.7
125.8
0.00043
0.00064
-0.00030
-0.00031
2857
14283
-25135
-33705
0.00025
0.00038
-0.00018
-0.00018
1668
8334
-14677
-19675
0.00043
0.00064
-0.00030
-0.00031
0.00023
0.00035
-0.00016
-0.00017
2857
14283
-25135
-33705
1549
7739
-13633
-18273
Housing
10.002/9.992
CALCULATED OUTPUTS:
@ Min. Interference @ Max. Interference @ Nom. Interference
Conditions
Conditions
Conditions
0.0001574803
0.0009055118
0.0005314961
1428
8217
4822
-1428
-8217
-4822
182.3
1048.7
615.4
35.9
206.5
121.2
0.00007
0.00011
-0.00005
-0.00005
0.00041
0.00062
-0.00029
-0.00030
0.00024
0.00036
-0.00017
-0.00018
476
2381
-4209
-5637
2733
13683
-24158
-32375
1606
8034
-14192
-19014