Académique Documents
Professionnel Documents
Culture Documents
Page 1 of 2
11.02
Sika Bitumen 60
Bitumen Emulsion Protective Coating
Description
A ready-to-use, one component, high viscosity and thixotropic bituminous emulsion for the protection of steel and concrete surfaces.
Uses
Advantages
Technical Data
Colour
Density (25C)
Solid Content
Curing Time
(25C)
Standard
Consumption
Storage
Shelf life
Packaging
200 kg drums
Application
Surface preparation
Application
Cleaning
Clean all tools and equipment immediately after use with soap and
water.
Use Sika Colma Cleaner to dissolve dried Sika Bitumen 60.
Important
Sika Bitumen 60
Page 2 of 2
Safety
Precautions
Ecology
Toxicity
Transportation
Non-hazardous.
In case of doubt, always follow the directions given on the pack or label.
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sikas current knowledge and experience of the products when properly
stored, handled and applied under normal conditions. In practice, the differences in materials, substrates and
actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The proprietary rights of third
parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users
should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of
which will be supplied on request
Sika Gulf B.S.C.
Bldg. 925, Road 115, Sitra Area 601
P.O. Box 15776
Adliya, Bahrain
Tel. +973 735 560 / Fax. +973 732 476
http://www.sikagulf.com