Académique Documents
Professionnel Documents
Culture Documents
Configure the
phone.
Set up a PC modem.
User's
Guide
Using the Agilent E6474A software, add a data device and set up a
data test sequence:
E6474A Software > Help > Tutorial > Topic Menu > Data Call
Sequence
E6474A Software > Help. Using the Index, refer to FAQ and
troubleshooting topics.
E6474A Software > Help. Using the Index, refer to FAQs,
troubleshooting topics, and the data error message reference.
1
2
3
4
5
6
Get ready
Install the software
Set up your system
Use your system
Get results fast
Get assistance, if you
need it
Open for a
Quick Start
E6474A
Software
CD
Online
Help
Documentation
Library
To open the tutorial, start the E6474A software and click Help > Tutorial.
E6474A Quick Basics shows you:
Key features and benefits
The E6474A workflow
Basic procedures illustrated with animated simulations. Click the
Show Me button at the end of each procedure to see the simulation.
To open the help, start the E6474A software and click Help > Help Topics,
or press F1, or click a help button.
The software includes context-sensitive, HTML-based online help. In the
help, you'll find all the information you need to make measurements with
the Agilent E6474A software, including procedures, measurement
parameters, and tips. The help opens in a browser window, separate from
the E6474A application window.
To open the Library, start the E6474A software and click Help > Library.
This web-based list gives you access to all the documentation supplied
with your system.
The Library contains:
User's Guide, Getting Started Poster, Release Notes (PDF format)
Various technology-specific reference guides (PDF format)
Step-by-step guides on how to setup a data phone
Installation instructions for Acrobat PDF Reader
E6474- 90043
Open for a
Quick Start
Quick Start
1
2
Get ready.
Make sure that you have everything you need to get
started. See Chapter 1 in the Agilent E6474A User's
Guide for details.
Or
Connect the phone
using the Agilent
E6473B direct
connect hub. Connect
the hub to the
laptop's USB port.
b. Attach the receiver(s) and/or scanner.
Connect the
receiver directly
to the laptop's
serial port.
Or
Connect the
receiver(s) to the
E6473B direct
connect hub.
Or
Connect the
scanner to the
E6473B direct
connect hub.
Or
For receivers and/or scanners with internal
GPS, attach the GPS antenna.
d. (In-Building)
Check the
battery, and
load the
backpack.