Académique Documents
Professionnel Documents
Culture Documents
Filtration Systems
Sustainable Modular
Filtration Systems
Contents
Page
Page
Contents ............
14
15
16
17
18
19
20
21
10
22
11
23
12
13
Glossary
PS : Pump Sta2on
UV : Ultraviolet Light
Sustainable Modular
Filtration Systems
BIOLOGICAL
SYSTEMS
ORGANIC
MEDIA
ADSORPTION SYSTEMS
ACTIVATED
CARBON
MEDIA
SPECIALISED
ADSORPTION
MEDIA
DUAL
VESSEL
SERIES
SINGLE
VESSEL
SERIES
GROUND
MOUNTED
VENT
SERIES
EXTENSION
VESSEL
SERIES
CUBE
SERIES
2
WAY
GROUND
MOUNT
VENT
SERIES
INORGANIC
MEDIA
DUAL
TREATMENT
TRAIN
The!use!of!advanced!bio0engineering!and!biological!digestion!ensures!air!
phase!contaminates!are!destroyed!in!the!most!complete!and!environmentally!
safe!manner.!
BioMedia!Organic!Media!is!made!from!one!of!the!most!renewable!media!
available.!There!are!no!chemical!inputs!in!the!growing,!processing!and!use.!It!
can!be!returned!to!the!earth!as!an!enhanced!growing!media.!
Bioaction!filtration!systems!are!designed!and!engineered!to!minimise!our!
carbon!footprint.!They!have!low!energy!requirements!and!are!highly!freight!
efficient!to!reduce!transport!movements.!!
75
CANISTER
SERIES
Over!90%!of!the!materials!used!in!construction!and!filter!media!can!be!
recycled!for!after0life!use.!
!
MEDIA SUPPLIES
Sustainable Modular
Filtration Systems
About
FiltaOdorTM
biolter
technology
FiltaOdorTM FO300 with a FiltaVentTM two-way passive lter in foreground installed for
Cos City Council WWPS.
Sustainable Modular
Filtration Systems
Adsorptive Media
FiltaOdorTM uses a unique hydrophobic micropore ltra2on media with high adsorp2ve proper2es for ecient mass transfer of
organics and oxygen from inlet gases into the liquid phase. This highly robust media has an excep2onally large surface area for
biomass distribu2on and is suciently porous to prevent high pressure loss.
Humidification and
Irrigation
A humidica2on chamber is located prior to the inlet of the lter plenum. Mis2ng sprayers are located in the chamber to saturate
untreated gas to >95% rela2ve humidity. The lter bed is irrigated to maintain correct moisture levels within the lter media to
op2mise biomass stability and colonisa2on. The irriga2on assembly is located on the lter bed surface and accessed through the
inspec2on hatch.
Optional Items
Standby fan with PLC upgrade. Stainless steel fans. High level systems opera2onal sensors. Irriga2on and inspec2on hatch access
plamorm. Con2nuous H2S monitoring. Ac2vated carbon secondary polisher.
Media
Volume
Media
Depth
Duct Size
Pressure
Drops
Biofilter
(m)
Width C
(m)
Length D
(m)
Biofilter
Vessel A
(m)
Misc.
(Skid,
Duct etc.)
Total B
(m)
Bio Filter
(m3)
Biofilter
(m)
Biofilter
Media (kg)
Vessel
(kg)
Skid (kg)
Misc. (kg)
Total (kg)
(mm) ID
Vessel
(Pa)
Model
Motor
Size (kW)
270
30
1.2
1.8
3.0
2.86
0.66
3.52
2.25
788
133
170
100
1191
104
600
Seat 15
0.37
FO165
165
594
30
1.8
1.8
3.0
2.94
0.66
3.60
4.95
1733
228
300
105
2366
154
600
Seat 20
1.10
FO300
300
1080
30
2.4
2.4
4.0
3.00
0.66
3.66
9.00
3150
337
420
120
4027
240
600
Seat 20
1.10
FO450
450
1620
30
3.0
3.0
4.5
3.08
0.66
3.74
13.50
4725
449
576
150
5900
300
600
Seat 25
2.20
FO670
670
2412
30
3.6
3.6
4.8
3.16
0.66
3.82
20.10
7035
589
690
200
8514
375
600
Seat 25
2.20
System
Heights
System
Mass
Vessel
Outside
Diameter
Biofilter
(sec)
75
Skid Size
Empty Bed
Residence
Time
(EBRT)
m3 / hr.
FO75
Capacity
L/s
Fan Details
Construction
FiltaOdorTM lter vessels are constructed from P300 HDPE, incorpora2ng impregnated resins that are corrosion resistant and UV
stabilised throughout the material. They have a high chemical-resistance to provide signicant design life expecta2on and are
suitable for all clima2c condi2ons. Construc2on follows DVS technical codes on plas2c joining DVS 2202 / 2210. Joint construc2on is
bul and extrusion welded.
Model
Series
FiltaOdorTM
Functional Description
The FiltaOdorTM system is a biological treatment system which is capable of removing greater than 95% of odours. A fan on the
exhaust side of the vessel creates nega2ve pressure to ensure air ow across the system. Hazardous gases in the incoming air move
through a humidica2on system to raise the rela2ve humidity to > 95%. The gas diuses through the moist organic media lter bed
where the contaminants are biologically oxidised. Moisture within the lter bed is maintained and controlled by an irriga2on system.
Treated air then ows through a vent stack and out to atmosphere.
Sustainable Modular
Filtration Systems
FiltaBTFTM
biotrickling
series
biological
air
phase
ltra3on
system
for
the
control
of
odourous
sewer
and
industry
gases.
Removable lid
Irriga3on/Transi3on
Media
Wet Well
The FiltaBTFTM biotrickling lter is part of the Bioac2on biological
air phase odour and emission lter range. These biological
scrubbers or biotricklers oer a very eec2ve way to treat high
levels of odorous and pollutant gases such as Hydrogen Sulphide
(H2S), mercaptans and VOCs. This natural process of biological
oxidisa2on can achieve signicant odour and emission reduc2on
in outlets with high gas concentra2ons, without the use of harsh
chemicals.
FiltaBTFTM biotrickling lters are a modular plugnplay lter
system and can be congured in a mul2ple vessel or low-rise
construc2on to achieve most treatment outcomes and
installa2on requirements. Depending on the site, by installing a
low-rise system with a large diameter vessel over a larger area
the duplica2on of pipe and system infrastructure associated with
tall mul2-vessel system is negated and the cost savings are
signicant. The modular design minimises costs via a reduc2on
in construc2on lead-2mes as well as logis2cs costs and on site
assembly costs. All the lter vessels are constructed in Australia
from HDPE to meet strict wastewater guidelines. They are
designed to minimise UV degrada2on by using UV stabilised
materials.
FiltaBTFTM biotrickling ltra2on systems have a great value
proposi2on and meet expecta2ons for the environmentally
sustainable treatment of gaseous pollutants from industries such
as municipal and industrial waste water treatment, sewer
systems and pump sta2ons, pulp & paper industries, tanneries,
rendering facili2es, minerals and petrochemical processing,
landlls, and compos2ng plants.
FiltaBTFTM BTF580
Sustainable Modular
Filtration Systems
Functional Description
The FiltaBTFTM system is a biological treatment system capable of removing up to 99% of odours. Hazardous gases are
extracted from the source using a blower/extrac2on fan and air is forced through a packed bed of inorganic media. The gas
diuses through the media lter bed which is con2nually moistened by an irriga2on system. Nutrient is provided by the
irriga2on system to promote microorganism growth on the lter media which metabolise the contaminated air stream. Water
to the irriga2on can be recirculated from the wet well and pH balanced. Nutrient supply can be supplemented by recycled
euent water if available.
Construction
FiltaBTFTM lter vessels are constructed from P300 HDPE, incorpora2ng impregnated resins that are corrosion resistant and UV
stabilised throughout the material. They have a high chemical-resistance to provide signicant design life expecta2on and are
suitable for all clima2c condi2ons. Construc2on follows DVS technical codes on plas2c joining DVS 2202 / 2210. Joint
construc2on is bul and extrusion welded.
Adsorptive Media
The packed bed media is either PVC pal rings or open cell foam blocks, each designed to provide a large surface area for
biological adhesion and minimise pressure drop.
Humidification and
Irrigation
The lter bed is irrigated to maintain correct moisture levels within the lter media to op2mise biomass stability and
colonisa2on. The irriga2on assembly is located on the lter bed surface and accessed through the inspec2on hatch.
Optional Items
Standby fan with PLC upgrade. Stainless steel fans. High level systems opera2onal sensors. Irriga2on and inspec2on hatch
access plamorm. Con2nuous H2S monitoring. Ac2vated carbon secondary polisher
GAC
(sec)
Biofilter
(m)
GAC
(m)
Width (m)
Length (m)
Biofilter
Vessel (m)
GAC Vessel
(m)
Misc.
(Skid, Duct,
etc.) (m)
Total Height
(m)
Biofilter (m3)
GAC (m3)
Biofilter (m)
GAC (m)
Biofilter
Media (kg)
GAC Media
(kg)
Vessels (kg)
Skid (kg)
Misc. (kg)
Total (kg)
Duct (mm)
ID
Vessel (Pa)
Model
Motor Size
(kW)
2088
15
N/A
2.3
N/A
2.3
4.3
5.2
N/A
0.16
5.39
8.7
N/A
2.13
N/A
861
N/A
661
415
500
2437
300
100
Seat
25
2.20
580
2088
15
3.0
2.3
1.8
2.3
+
2.4
4.3
+
4.0
5.2
2.56
0.16
5.39
8.7
1.7
2.13
0.61
861
974
1004
835
600
4274
300
620
Seat 25
Fan
Details
Pressure
Drops
Biofilter
(sec)
Duct
Sizing
System
Mass
m3 / hr.
Media
Depth
Media
Volume
System
Heights
Skid Size
L/s
Vessel
Outside
Diameter
Model
FB580
580
FB580H
FiltaBTF
Series
Capacity
Empty
Bed
Residence
Time
(EBRT)
FiltaBTFTM BTF580H
2.20
Sustainable Modular
Filtration Systems
About
FiltaPlusTM
odour
control
technology
The dual vessel congura2on uses separate vessels for the biological
and carbon ltra2on components of the process. Depending on site
space restric2ons and ow requirements, the dual vessel design can
be more cost eec2ve than other solu2ons.
Bioac2ons experts will assess the odour prole for any given site and
propose a mix of homogeneous organic micropore ltra2on media
derived from a highly renewable resource and combina2ons of carbon
media in the form of granular vapour carbon and caus2c
impregnated vapour carbon.
FiltaPlusTM rapid installa2on via delivery of precongured units on engineered galvanised skids
Adsorptive Media
FiltaPlusTM uses a unique hydrophobic micropore ltra2on media with high adsorp2ve proper2es for ecient mass transfer of organics
and oxygen from inlet gases into the liquid phase. This highly robust media has an excep2onally large surface area for biomass
distribu2on and is suciently porous to prevent high pressure loss.
The secondary vessel uses specically designed ac2vated carbon for use in odour control systems where the primary cause of odour is as
a result the presence of mercaptans, Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to
meet any needs that fall outside the capaci2es of our standard ac2vated carbon materials.
Humidification and
Irrigation
A humidica2on chamber is located prior to the inlet of the lter plenum. Mis2ng sprayers are located in the chamber to saturate
untreated gas to >95% rela2ve humidity. The lter bed is irrigated to maintain correct moisture levels within the lter media to op2mise
biomass stability and colonisa2on. The irriga2on assembly is located on the lter bed surface and accessed through the inspec2on hatch.
Optional Items
Standby fan with PLC upgrade. Stainless steel fans. High level systems opera2onal sensors. Irriga2on and inspec2on hatch access
plamorm. Con2nuous H2S monitoring
GAC
(sec)
Biofilter
(m)
GAC
(m)
Width C
(m)
Length D
(m)
Biofilter
Vessel A
(m)
GAC
Vessel
(m)
Misc.
(Skid,
Duct,
etc.) (m)
Total
Height B
(m)
Biofilter
( m3 )
GAC
( m3 )
Biofilter
(m)
GAC (m)
Biofilter
Media
(kg)
GAC
Media
(kg)
Vessels
(kg)
Skid (kg)
Misc. (kg)
Total (kg)
Duct
(mm) ID
Vessels
(Pa)
Model
Motor
Size (kW)
FP75D
75
270
30
3.0
1.2
0.75
1.8
+
1.0
3.0
+
1.5
2.66
1.06
0.16
2.82
2.25
0.1
2.06
0.32
788
75
146
190
165
1364
104
1421
Seat 15
0.37
FP165D
165
594
30
3.0
1.8
1.0
1.8
+
1.0
3.0
+
2.2
2.74
1.78
0.16
2.90
4.95
0.5
1.99
0.62
1733
260
316
500
220
3029
154
1108
Seat 20
1.10
FP300D
300
1080
30
3.0
2.4
1.2
2.4
+
1.2
4.0
+
3.0
2.80
2.18
0.16
2.96
9.00
0.7
2.02
0.62
3150
378
457
620
290
4895
240
1114
Seat 20
1.10
FP450D
450
450
30
3.0
3.0
1.5
3.0
+
1.5
4.5
+
3.0
2.88
2.22
0.16
3.04
13.5
1.1
1.94
0.61
4725
588
618
831
310
7072
300
1111
Seat 25
2.20
FP670D
670
2412
30
3.0
3.6
1.8
3.6
+
1.8
4.8
+
3.0
2.96
2.38
0.16
3.12
20.1
1.5
2.00
0.61
3150
857
808
990
330
10019
300
1120
Seat 25
Fan
Details
Biofilter
(sec)
Duct
Sizing
m3 / hr.
Media
Depth
Media
Volume
System
Heights
L/s
Vessel
Outside
Diameter
Pressure
Drops
FiltaPlusTM lter vessels are constructed from P300 HDPE, incorpora2ng impregnated resins that are corrosion resistant and UV stabilised
throughout the material. They have a high chemical -resistance to provide signicant design life expecta2on and are suitable for all
clima2c condi2ons. Construc2on follows DVS technical codes on plas2c joining DVS 2202 / 2210. Joint construc2on is bul and extrusion
welded.
System
Mass
Construction
Skid Size
Functional Description
The FiltaPlusTM system is a two stage treatment system which is capable of removing greater than 99.5% of odours. A fan on the exhaust
side of the vessel creates nega2ve pressure to ensure air ow across the system. Hazardous gases in the incoming air move through a
humidica2on system to raise the rela2ve humidity to > 95%. The gas then diuses through the moist organic media lter bed where the
contaminants are biologically oxidised. Moisture within the lter bed is maintained and controlled by an irriga2on system. Treated air
then ows through a secondary carbon vessel where a specic ac2vated carbon media mixture is used to treat the target gases to
achieve more than 99.5% removal of source gases. Treated air then ows through a vent stack and out to atmosphere.
Model
FiltaPlusTM
Dual
Vessel
Series
Capacity
Empty
Bed
Residence
Time
(EBRT)
Sustainable Modular
Filtration Systems
2.20
Sustainable Modular
Filtration Systems
FiltaPlusTM
extension
vessel
series
bioltra3on
systems
use
a
combina3on
of
biological
and
carbon
ltra3on
technologies
for
the
control
of
odourous
sewer
and
industry
gases.
The dual vessel congura2on uses separate vessels for the biological
and carbon ltra2on components of the process. Depending on site
space restric2ons and ow requirements, the dual vessel design can
be more cost eec2ve than other solu2ons.
Bioac2ons experts will assess the odour prole for any given site and
propose a mix of homogeneous organic micropore ltra2on media
derived from a highly renewable resource and combina2ons of carbon
media in the form of granular vapour carbon and caus2c
impregnated vapour carbon.
FiltaPlusTM FP300E system built for Eurobodalla Shire Council Surf Beach WWPS
10
Sustainable Modular
Filtration Systems
Pressure
Drops
GAC
Vessel (m)
Misc.
(Skid,
Duct, etc.)
(m)
Total
Height B
(m)
Biofilter
(m3)
(m3)
GAC
Biofilter
(m)
GAC (m)
Biofilter
Media (kg)
GAC
Media
(kg)
Vessel
(kg)
Skid (kg)
Misc. (kg)
Total (kg)
Duct (mm)
ID
Vessels
(Pa)
Model
Motor
Size (kW)
30
3.0
1.2
0.75
1.8
3.0
2.86
0.40
0.66
3.92
2.25
0.2
2.06
0.21
788
126
153
170
165
1402
104
720
Seat 15
0.37
FP165E
165
594
30
3.0
1.8
1.0
1.8
3.0
2.94
0.45
0.16
3.55
4.95
0.5
1.99
0.20
1733
277
263
300
220
2792
154
717
Seat 20
1.10
FP300E
300
1080
30
3.0
2.4
1.2
2.4
4.0
3.00
0.50
0.16
3.66
9.00
0.90
2.02
0.20
3150
504
387
420
290
4751
240
720
Seat 20
1.10
Media
Depth
Media
Volume
Vessel
Outside
Diameter
Capacity
System
Heights
Fan Details
Duct Sizing
Biofilter
Vessel A
(m)
270
System
Mass
Length D
(m)
75
Skid Size
Width C
(m)
FP75E
Empty Bed
Residence
Time
(EBRT)
GAC
(m)
Standby fan with PLC upgrade. Stainless steel fans. High level systems opera2onal sensors. Irriga2on and inspec2on hatch access
plamorm. Con2nuous H2S monitoring
Biofilter
(m)
Optional Items
GAC
(sec)
A humidica2on chamber is located prior to the inlet of the lter plenum. Mis2ng sprayers are located in the chamber to
saturate untreated gas to >95% rela2ve humidity. The lter bed is irrigated to maintain correct moisture levels within the lter
media to op2mise biomass stability and colonisa2on. The irriga2on assembly is located on the lter bed surface and accessed
through the inspec2on hatch.
Biofilter
(sec)
Humidification and
Irrigation
m3 / hr.
Adsorptive Media
FiltaPlusTM uses a unique hydrophobic micropore ltra2on media with high adsorp2ve proper2es for ecient mass transfer of
organics and oxygen from inlet gases into the liquid phase. This highly robust media has an excep2onally large surface area for
biomass distribu2on and is suciently porous to prevent high pressure loss. The secondary vessel uses specically designed
ac2vated carbon for use in odour control systems where the primary cause of odour is as a result the presence of mercaptans,
Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to meet any needs that fall outside
the capaci2es of our standard ac2vated carbon materials.
L/s
Construction
FiltaPlusTM lter vessels are constructed from P300 HDPE material, which is made from impregnated resins that are corrosion
resistant and UV stabilised throughout the material. They have a high chemical-resistance to provide signicant design life
expecta2on and are suitable for all clima2c condi2ons. Construc2on follows DVS technical codes on plas2c joining DVS 2202 /
2210. Joint construc2on is bul and extrusion welded.
Model
Extension
Vessel
Series
FiltaPlusTM
Functional Description
The FiltaPlusTM system is a two stage treatment system which is capable of removing greater than 99.5% of odours. A fan on the
exhaust side of the vessel creates nega2ve pressure to ensure air ow across the system. Hazardous gases in the incoming air
move through a humidica2on system to raise the rela2ve humidity to > 95%. The gas then diuses through the moist organic
media lter bed where the contaminants are biologically oxidised. Moisture within the lter bed is maintained and controlled by
an irriga2on system. Treated air then ows through the carbon extension where a specic ac2vated carbon media mixture is
used to treat the target gases to achieve more than 99.5% removal of source gases. Treated air then ows through a vent stack
and out to atmosphere.
11
Sustainable Modular
Filtration Systems
FiltaCarbTM
vapour
phase
series
ac3vated
carbon
ltra3on
systems
for
the
control
of
odourous
sewer
and
industry
gases.
FiltaCarbTM FC350 system built for Sydney Water Corpora2on Douglas Park
storage tank
12
Sustainable Modular
Filtration Systems
Duct
Size
Pressure
Drops
GAC
(m)
GAC
Media
(kg)
Vessel
(kg)
Skid
(kg)
Misc.
(kg)
Total
(kg)
(mm) ID
Vessel
(Pa)
Model
Motor
Size
(KW)
1.5
2.4
1.78
0.16
1.94
0.47
0.62
260
88
200
105
653
154
508
Seat 20
1.10
1.2
1.6
2.4
2.18
0.16
2.34
0..68
0.62
378
120
200
130
828
240
514
Seat 20
1.10
Skid
Size
Empty
Bed
Residen
ce Time
(EBRT)
/ hr.
m3
L/s
Fan
Details
Media
Depth
GAC
( m3 )
1.0
System
Mass
Media
Volume
Total B
(m)
810
System
Heights
Misc.
(Skid,
Duct)
558
225
Vessel
Outside
Dia.
155
FC225
Capacity
Vessel
A (m)
Standby fan with PLC upgrade. Stainless steel fans. High level systems opera2onal sensors. Inspec2on hatch access plamorm.
Con2nuous Hydrogen Sulphide (H2S) monitoring.
Length
D (m)
Optional Items
Width C
(m)
U2lises a specically designed ac2vated carbon for use in odour control systems where the primary cause of odour is as a result the
presence of mercaptans, Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to meet any
needs that fall outside the capaci2es of our standard ac2vated carbon materials.
(m)
Adsorptive Media
(sec)
Construction
FiltaCarbTM vessels are constructed from P300 HDPE, incorpora2ng impregnated resins that are corrosion resistant and UV
stabilized throughout the material. They have a high chemical-resistance to provide signicant design life expecta2on and are
suitable for all clima2c condi2ons. Construc2on follows DVS 2202 / 2210 technical codes on plas2c joining. Joint construc2on is
bul-welded and extrusion welded.
FC155
Model
Series
FiltaCarbTM
Functional Description
The FiltaCarbTM system is a single-stage treatment using carbon adsorp2on technology. Hazardous gases are extracted from the
source using an extrac2on/blower fan that then vents the untreated gases through the lter media. The untreated gases
accumulate in the lower plenum of the lter before being evenly diused through the media of the lter bed where contaminates
are physically adsorbed. A specic ac2vated carbon media mixture is used to treat the target gases to achieve more than 99.5%
removal of source gases.
FC350
350
1260
1.5
1.6
3.0
2.22
0.16
2.38
1.05
0.61
588
169
255
135
1147
240
511
Seat 20
1.10
FC510
510
1836
1.8
1.8
3.0
2.38
0.16
2.54
1.53
0.61
857
219
300
160
1535
300
520
Seat 25
2.20
FC900
900
3240
2.4
2.4
4.0
2.56
0.16
2.72
2.70
0.61
1512
343
420
200
2475
375
514
Seat 35
5.50
FC1400
1400
5040
3.0
3.0
4.8
2.75
0.16
2.91
4.20
0.60
2352
478
576
350
3765
500
511
Seat 35
5.50
FC1900
1900
6840
3.6
3.6
4.8
3.01
0.16
3.17
5.70
0.57
3192
692
690
380
4954
500
470
Seat 35
5.50
13
Sustainable Modular
Filtration Systems
FiltaCarbTM
vent
cube
series
vapour
phase
ac3vated
carbon
ltra3on
systems
for
the
control
of
odourous
sewer
gases.
The FiltaCarbTM vent cube oers a simple and secure solu2on for
fugi2ve odours from pump sta2ons. The system can be mounted
directly above a penetra2on into the wet well or mounted locally and
ducted to the system. The system is supplied complete with extrac2on
fan and sound alenuator. The vent cube has a robust construc2on
with high durability and is UV and corrosion resistant.
All FiltaCarbTM vent cube models have incorporated into their design
a fats and greases pre-lter to maintain constant air pressure and
increase the life of the carbon media. This pre-lter also makes the
system easier to maintain as it can be cleaned as oten as necessary.
FiltaCarbTM FCC150 cube series lter built for Hunter Water Corpora2on Corlele WWPS
14
Sustainable Modular
Filtration Systems
Optional Items
An electrical control panel, which can be mounted to the skid for local control, with manual ON/OFF/AUTO switch opera2on and
indicator lights to show opera2onal status. Control panel powder coated steel - IP65 rated or op2onal stainless steel - IP65 rated.
Break-through gas indicators
Duct Size
Pressure
Drops
(m)
GAC (kg)
Vessel
(kg)
Misc. (kg)
Total (kg)
(mm) ID
Vessel
(Pa)
Model
Motor Size
(KW)
1.69
0.45
0.57
252
78
30
360
154
341
Seat 20
1.10
200
540
1.14
1.55
1.77
0.60
0.60
336
198
30
564
154
577
Seat 20
1.10
hr.
Media
Mass
System
Mass
(m3)
1.30
Media
Depth
Vessel A
(m)
1.00
Media
Volume
Length D
(m)
System
Heights
Width C
(m)
Empty Bed
Residence
Time
(EBRT)
540
Capacity
(sec)
Fan Details
U2lises a specically designed ac2vated carbon for use in odour control systems where the primary cause of odour is as a result of
the presence of mercaptans, Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to meet
any needs that fall outside the capaci2es of our standard ac2vated carbon materials.
Vessel Size
Adsorptive Media
m3 /
FCC200
Construction
FiltaCarbTM vent cube ac2vated carbon lter is designed to reduce logis2c and installa2on costs. The system is preloaded with
media and is factory tested prior to dispatch. The lter vessel as well as any other associated components (including extrac2on fan
and sound alenuator) are mounted within a single assembly. The FiltaCarbTM cube vent lter is constructed from PVC which has
been constructed to be corrosion and UV resistant. Op2onal: HDPE.
150
L/s
Model
Cube
Series
FiltaCarb
FCC150
Functional Description
The FiltaCarbTM system is a single-stage treatment using carbon adsorp2on technology. A fan on the exhaust side of the vessel
creates nega2ve pressure to ensure air ow across the system. Hazardous gases in the incoming air move through a pre-lter to
capture fats and greases and then move through the lter media. The untreated gases accumulate in the lower plenum of the lter
before being evenly diused through the media of the lter bed where contaminates are physically adsorbed. A specic ac2vated
carbon media is used to treat the target gases to achieve more than 99.5% removal of source gases.
15
Sustainable Modular
Filtration Systems
FiltaCarbTM
75
series
canister
vapour
phase
ac3vated
carbon
ltra3on
systems
for
the
control
of
odourous
sewer
and
industry
gases.
FiltaCarbTM vapour phase ac2vated carbon systems provide an
ecient and economical means to reduce VOC concentra2ons,
corrosive gases including Hydrogen Sulphide (H2S) and toxic vapours
to control odours. They provide immediate adsorp2on upon contact
with the gases. All of the systems have a specied contact 2me to
ensure they meet op2mum performance throughout the life of the
media. The lter vessels are lled with a specic granular ac2vated
carbon, which is suitable for a variety of odour abatement
applica2ons.
FiltaCarbTM 75 series vapour carbon canisters, each containing 75kg of
ac2vated carbon, are ideal for low-ow air purica2on for industrial
and municipal applica2ons. These budget adsorp2on lters are
specically designed for wastewater and acid gas emissions but they
are also suitable for a range of industrial gases.
The Bioac2on FiltaCarbTM lter series provides total exibility in
designing a system to suit the target ow requirements and emission
reduc2on outcomes. They are par2cularly well suited to:
Sewer vents, wet sta2ons and weir boxes at chemical and
municipal wastewater treatment plants.
Sewer pump sta2ons
Sewer wet wells
Inlet works
Storage Tanks
Other acid emission sources
FiltaCarbTM FC75x3
FiltaCarbTM FC75x1
16
Sustainable Modular
Filtration Systems
Pressure
Drops
(m3)
(m)
GAC
Media
(kg)
Drum
(kg)
Skid
(kg)
Misc.
(kg)
Total
(kg)
(mm)
ID
Vessel
(Pa)
Model
Motor
Size
(KW)
0.59
0.85
1.20
1.06
0.68
1.74
0.13
0.52
75
13
20
100
208
100
821
Seat 15
0.37
FC75x2
150
540
1.8
0.59
0.85
1.80
1.06
1.15
2.21
0.27
0.52
150
26
29
100
305
154
821
Seat 20
1.10
FC75x3
225
810
1.8
0.59
0.85
2.40
1.06
1.21
2.27
0.40
0.52
225
38
39
100
102
154
821
Seat 20
1.10
FC75
75
270
1.8
0.59
N/A
N/A
1.06
N/A
1.06
0.13
0.52
75
13
N/A
N/A
88
100
821
N/A
N/A
FC75SS
75
270
1.8
0.59
N/A
N/A
1.06
N/A
1.06
0.13
0.52
75
25
N/A
N/A
100
100
821
N/A
N/A
hr.
Media
Depth
Media
Volume
Vessel
Outside
Dia.
Capacity
L/s
System
Heights
Fan
Details
Duct Size
Total B
(m)
1.8
System
Mass
Misc.
(Skid,
Duct)
270
Skid Size
75
Empty
Bed
Residenc
e Time
(EBRT)
Vessel
(m)
Standby fan with PLC upgrade. Stainless steel fans. High level systems opera2onal sensors. Con2nuous H2S monitoring. Stainless
Steel Drums. Epoxy Lined HDPE.
Length
D (m)
Optional Items
Width
C (m)
U2lises a specically designed ac2vated carbon for use in odour control systems where the primary cause of odour is as a result
of the presence of mercaptans, Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to
meet any needs that fall outside the capaci2es of our standard ac2vated carbon materials.
(m)
Adsorptive Media
(sec)
FiltaCarbTM drum canister lter is designed to reduce logis2c and installa2on costs. The system is preloaded with media and is
factory tested prior to dispatch. The FiltaCarbTM lter is made from PVC and is constructed to be UV and corrosion resistant
(Op2onal; epoxy lined mild steel, stainless steel, or HDPE).
m3 /
Construction
FC75x1
Model
75
Series
FiltaCarb TM Package
Systems
FiltaCarb TM
Drum
Cartridges
Functional Description
The FiltaCarbTM drum canister lter is a cost eec2ve and ecient lter system that requires lille maintenance. The system is
designed for easy and simple lter changeover. The canisters are used in a range of congura2ons in skid mounted systems or
specialised designs. The system is a single-stage treatment using carbon adsorp2on technology. Hazardous gases are extracted
from the source using an extrac2on/blower fan that then vents the untreated gases through the lter media. The untreated gases
accumulate in the lower plenum of the lter before being evenly diused through the media of the lter bed where contaminates
are physically adsorbed. A specic ac2vated carbon media is used to treat the target gases to achieve more than 99% removal of
source gases.
17
Sustainable Modular
Filtration Systems
FiltaVentTM
passive
ven<ng
series
ground
mount
cartridge
odour
ltra3on
system
for
the
control
of
odourous
sewer
gases.
18
Sustainable Modular
Filtration Systems
Duct
Size
Static
Pressure
Vessel
(Pa)
Media
Depth
11
24
35
50
109
0.42
17
29
46
100
214
FV60
60
216
0.89 x 0.48
0.88
0.06
0.42
34
44
78
100
214
FV120
120
432
0.89 x 0.89
0.94
0.12
0.42
68
75
143
154
214
CART20
20
72
0.32
0.39
0.02
0.28
11
15
N/A
109
CART30
30
108
0.32
0.55
0.03
0.42
17
22
N/A
214
Model
Total
(kg)
0.28
0.03
Vessel
(kg)
0.02
0.88
GAC
Media
(kg)
0.64
(m)
0.5
0.5
( m3 )
Total (m)
1
1
(sec)
72
108
m3 / hr.
20
30
L/s
FV20
FV30
Series
(m)
(mm) ID
HDPE Construc2on, Inlet and outlet adaptor ange kit, Extrac2on fan Seat 15 0.37kW (Details on ow specica2ons available on
request)
System
Mass
Optional Items
Media
Volume
Adsorptive Media
A custom blend of Ac2carb EA1000 granular vapour ac2vated carbon and Ac2carb EA1000K pelle2sed impregnated ac2vated
carbon is used and specically designed for use in odour control systems where the primary cause of odour is as a result of the
presence of mercaptans, Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to meet any
needs that fall outside the capaci2es of our standard ac2vated carbon materials.
System
Heights
FiltaVentTM passive ground mount lters are made from PVC and constructed to be UV and corrosion resistant (Op2onal HDPE). All
duct and pipe penetra2ons are PVC which have been constructed to be UV resistant. The lid has a gasket seal and is secured to the
vessel base and bolted securely ange to ange. More detailed specica2ons per model are available on request.
Vessel
Outside
Diameter
Construction
Empty
Bed
Residen
ce Time
(EBRT)
Capacity
FiltaVentTM FV120
quad cartridge system
Functional Description
FiltaVentTM passive ground mount lters are cost eec2ve and ecient lter systems with very low maintenance costs. The system is
designed for easy and simple lter changeover and replacement. The system is a single-stage treatment using carbon adsorp2on
technology. Hazardous gases are pushed through the lter media. The untreated gases accumulate in the lower plenum of the lter
before being evenly diused through the media of the lter bed where contaminates are physically adsorbed. A specic ac2vated
carbon media is used to treat the target gases to achieve more than 99.5% removal of source gases. FiltaVentTM lters are designed
to reduce logis2c and installa2on costs. The system comes with 1 - 4 canisters, depending on the model ordered, all are factory
tested prior to dispatch.
FiltaVentTM
FiltaVentTM
Replacement
Cartridges
19
Sustainable Modular
Filtration Systems
FiltaVentTM
two-way
passive
series
ground
mount
cartridge
odour
ltra3on
system
for
the
control
of
odourous
sewer
gases.
Exis3ng
Vent
Stack
FiltaVentTM two way passive vent lters are cost eec2ve and ecient
ground mounted lter systems with replaceable cartridges. Each one
is a self-breathable passive lter with low sta2c pressure that can be
used to solve a range of odour issues. Applica2ons for this system is
where there is a need to allow a high ow of inlet air on demand from
the system. The annulus lter design lowers the sta2c pressure across
the lter bed without compromising surface contact and residence
2me. The FiltaVentTM two way lter can act as or connect to a vent
stack to create air inow while trea2ng odorous oumlow.
The op2onal galvinised vent stack mount pictured above has been alached to the
FiltaVentTM system which has then been sealed at the top to enable the ltered air to
exhaust through the exis2ng vent stack which has been reposi2oned to the vent stack
mount.
Two-way air ow
allows the lter to breath
20
Sustainable Modular
Filtration Systems
Duct Size
Static
Pressure
(m)
GAC
Media
(kg)
Vessel
(kg)
Total
(kg)
(mm)
ID
Vessel
(Pa)
144
0.5
1.14
0.06
0.10
33
24
57
50
40
FV80P
80
288
0.89 x 0.48
1.38
0.12
0.10
66
44
110
100
40
FV160P
160
576
0.89 x 0.89
1.44
0.24
0.10
132
75
207
154
40
2WCART40
40
144
0.32
0.92
0.06
0.10
33
N/A
33
N/A
40
Media
Depth
Capacity
System
Mass
( m3 )
40
Media
Volume
System
Heights
FV40P
Empty
Bed
Residenc
e Time
(EBRT)
Total
(m)
Vessel
Outside
Diameter
Optional Items
(m)
A custom blend of Ac2carb EA1000 granular vapour ac2vated carbon and Ac2carb EA1000K pelle2sed impregnated ac2vated
carbon is used and specically designed for use in odour control systems where the primary cause of odour is as a result the
presence of mercaptans, Hydrogen Sulphide (H2S), and VOCs. Customised media blends and mixtures can be supplied to meet any
needs that fall outside the capaci2es of our standard ac2vated carbon materials.
(sec)
Adsorptive Media
m3 / hr.
FiltaVentTM
Replacement
Cartridges
FiltaVentTM two-way passive ground mount lters are made from PVC and constructed to be UV and corrosion resistant (Op2onal
HDPE). All duct and pipe penetra2ons are PVC which have been constructed to be UV resistant. The lid has a gasket seal and is
secured to the vessel base and bolted securely ange to ange. More detailed specica2ons per model are available on request.
L/s
FiltaVentTM
Construction
Model
2 Way
Series
FiltaVent
FV160P
4
cartridge
system
Functional Description
FiltaVentTM two-way passive ground mount lters are cost eec2ve and ecient lter systems with very low maintenance costs.
The system is designed for easy and simple lter changeover and replacement. The system is a single-stage treatment using
carbon adsorp2on technology. Hazardous gases are pushed through the lter media. The untreated gases accumulate in the lower
plenum of the lter before being evenly diused through the media of the lter bed where contaminates are physically adsorbed.
In addi2on to the treated air owing out through the lter, this system also enables unrestricted ow of air back through the
intake pipe to enable pressure reduc2on in the network. A specic ac2vated carbon media is used to treat the target gases to
achieve more than 99.5% removal of source gases. FiltaVentTM lters are designed to reduce logis2c and installa2on costs. The
system comes with 1 - 4 canisters, depending on the model ordered, all are factory tested prior to dispatch.
21
Sustainable Modular
Filtration Systems
Bioac<ons
services
The business has operated for over ten years with the rst ve years
spent in a research and development program prior to the forma2on
of Bioac2on Pty Ltd. The company con2nues a high level of research
and product development in conjunc2on with academic organisa2ons
and trade partners.
24
Sustainable Modular
Filtration Systems
Company Details
Sales:
Email: enquires@bioaction.com.au
Web: www.bioaction.com.au
Postal Address:
25
Sustainable Modular
Filtration Systems
Notes
28