Vous êtes sur la page 1sur 10

Product Specifications

Same Band Combiner Duplex/TX

Combining an additional TX into a duplexed (TX/RX) path

Multiply your investment in feeders and antennas

Same Band Combiners (SBC) reduce operating cost (OPEX) and accelerate deployment by
enabling multiple radios to use a single antenna. Low insertion loss minimizes impact on
performance and advanced features like remote tuning save on maintenance expenses and allow
the most efficient use of valuable spectrum now and in the future. CommScope's portfolio of SBCs
includes a large variety of models for outdoor or indoor applications. Whether used for technology
migration or capacity expansion, SBCs provide a simple solution to sharing infrastructure while
preserving quality of service (QoS) for subscribers.

With CommScope's portfolio of high performance same band combiners for a wide range of
applications, the benefits of sharing can be realized without sacrificing simplicity or performance.
Compact and rugged or sophisticated and versatile, our Andrew
Andrew
Same Band Combiners are available
for indoor or outdoor applications, including tower top installations. They incorporate novel technology
and advanced architectures to provide optimum performance while maximizing utilization of valuable
spectrum assets.
When there are more radio transmit ports than available feeders or antennas, a Duplex/TX same band
combiner solves the problem by allowing an additional TX to share an already duplexed path. This type
of SBC usually complements a receive multicoupler system or other means of RX sharing.
Directional filter architectures optimize the performance of devices also known as Low Loss Combiners
(LLC). Field
Field--tunable models can be controlled locally or remotely and are supported through the Andrew
Network Management System (ANMS).
Select models include one or more integrated features and functions, including:
l
l

l
l

dc Pass allowing dc current and AISG signals to pass through one or more branches
dc Switching the dc path through the SBC can be altered in the field, either automatically with dc
sensing or manually via a selector on the unit
dc Redundancy supporting a standby dc source; the SBC sinks a dummy current from the standby
source to mimic a load and prevent false alarms
Convertible Mounting Brackets a novel type of bracket that supports a variety of mounting methods
Stacking Features allows units to be attached to each other to facilitate installation on cable ladders
and in racks

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2014

page 1 of 10
July 9, 2015

Product Specifications
LLC
LLC--850
850--5

LowLossCombinerKit850,5MHzBW
l

dcTransparent2Gpath

Daisychainablealarmoutput

Realtimeclock

Builtinwebinterface

BuiltinSNMPagent

Fieldupgradablefirmware

Electrical Specifications
LicenseBand

Cellular

General Specifications
ProductType

Duplex/Tx

Application

Indoor

Included Products
E15Z50P05 (ProductComponentnotorderable) LowLossCombiner850,5MHzBW,RemoteTuning
C61B01P36 |

C61B01P3601 PowerCableforReceiveMulticouplersandLowLossCombiners,8m

C61B01P51 AlarmCableforLowLossCombiners,8m

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2014

page 2 of 10
July 9, 2015

Product Specifications
E15Z50P05

LowLossCombiner850,5MHzBW,RemoteTuning
l

dcTransparent2Gpath

Daisychainablealarmoutput

Realtimeclock

Builtinwebinterface

BuiltinSNMPagent

Fieldupgradablefirmware

Electrical Specifications Rx (Uplink)


Bandwidth

25.00MHz

Isolation,typical

35dB

ReturnLoss,typical

18dB

FrequencyBand

824849MHz

InsertionLoss,maximum

0.50dB

InsertionLoss,typical

0.25dB

Isolation,minimum

30dB

ReturnLoss,minimum

16dB

Electrical Specifications Tx (Downlink)


Bandwidth

19.00MHz

Isolation,typical

35dB

ReturnLoss,typical

18dB

FrequencyBand

869894MHz

GroupDelayVariation,maximum 150ns@200.00kHz
InputPower,PEP,maximum

2kW

InputPower,RMS,maximum

500W

InsertionLoss,maximum

0.80dB

InsertionLoss,typical

0.50dB

Isolation,minimum

30dB

ReturnLoss,minimum

16dB

Electrical Specifications 2 Tx (Downlink)


Bandwidth

3.84MHz

InputPower,RMS,maximum

70W

Isolation,typical

30dB

ReturnLoss,typical

18dB

FrequencyBand

869894MHz

InputPower,PEP,maximum

2kW

InsertionLoss,maximum

0.80dB

InsertionLoss,typical

0.50dB

Isolation,minimum

25dB

ReturnLoss,minimum

16dB

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2014

page 3 of 10
July 9, 2015

Product Specifications
E15Z50P05

Electrical Specifications
3rdOrderIMDTestMethod

Two+43dBmcarriers

3rdOrderIMD,maximum

107dBm

LicenseBand

Cellular

OperatingCurrentatVoltage

130mA@24V

PowerConsumption,maximum 20W
Voltage

1975V

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2014

page 4 of 10
July 9, 2015

Product Specifications
E15Z50P05

Block Diagram

General Specifications
ProductType

Duplex/Tx

Application

Indoor

Mechanical Specifications
Color

Lightgray

ConnectorInterface

716DINFemale

GroundScrewDiameter

5.00mm

RackType

EIA19in

RackUnits

Environmental Specifications
IngressProtectionTestMethod IEC60529:2001,IP20
OperatingTemperature

10Cto+55C(+14Fto+131F)

Dimensions
Depth

415.0mm

Height

88.0mm | 3.5in

Weight

18.3kg

Width

483.0mm

16.3in

40.3lb
|

19.0in

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2014

page 5 of 10
July 9, 2015

Product Specifications
E15Z50P05

Outline Drawing

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2014

page 6 of 10
July 9, 2015

Product Specifications
C61B01P36 | C61B01P3601

PowerCableforReceiveMulticouplersandLowLossCombiners,8m

General Specifications
ProductType

Powercable

Application

Lowlosscombiner

Receivemulticoupler

Mechanical Specifications
ConductorType

24AWG

Conductors,quantity

ConnectorInterface

Pluggableterminalblock

MaterialType

PVC

Dimensions
Length

8.0m

Weight

210.0g

26.2ft
|

0.5lb

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 18, 2014

page 7 of 10
July 9, 2015

Product Specifications
C61B01P36|C61B01P3601

Outline Drawing

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 18, 2014

page 8 of 10
July 9, 2015

Product Specifications
C61B01P51

AlarmCableforLowLossCombiners,8m

General Specifications
ProductType

Alarmcable

Application

Lowlosscombiner

Mechanical Specifications
ConductorType

24AWG

Conductors,quantity

ConnectorInterface

Pluggableterminalblock

MaterialType

PVC

Dimensions
Length

8.0m

Weight

120.0g

26.2ft
|

0.3lb

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 18, 2014

page 9 of 10
July 9, 2015

Product Specifications
C61B01P51

Outline Drawing

2015CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: March 18, 2014

page 10 of 10
July 9, 2015

Vous aimerez peut-être aussi