Vous êtes sur la page 1sur 2

Safety Technology International, Inc.

Safety Technology International (Europe) Ltd.

2306 Airport Road Waterford, Michigan 48327-1209


Phone: 248-673-9898 Fax: 248-673-1246
Toll Free: 800-888-4784 E-mail: info@sti-usa.com
Web: www.sti-usa.com

Unit 49G Pipers Road Park Farm Industrial Estate Redditch


Worcestershire B98 0HU England Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 Freephone: 0800 085 1678 (UK only)
E-mail: info@sti-europe.com Web: www.sti-europe.com
DRILL (4) .25 in.
6.3mm HOLES

8.25 in.(210mm)

8.25 in.(210mm)

STI-8170 BACKPLATE
(OPTIONAL)

1.5 in.(38mm)
4.25 in.(108mm)

2.75 in.(70mm)

19033 ANCHOR
(4) PROVIDED

5 in.(127mm)

STI-9601
STI-9601-SS

5.75 in.(146mm)

7 in.(178mm)

7.125 in.(181mm)

STI-9602

1.5 in.(38mm)
3.25 in.(83mm)

19020 CLAMP
(4) PROVIDED

4.5 in.(114mm)
3 in.(76mm)

STI-9604
STI-9604-SS

3.9 in.(99mm)

8.25 in.(210mm)

STI-9605
STI-9605-SS
8.25 in.(210mm)

19013 SCREWS
#10 x 1 1/2 in.
(4) PROVIDED
1.5 in.(38mm)

4.6 in.(117mm)

6 in.(152mm)

3 in.(76mm)

STI-9610

OPTIONAL ACCESSORIES

STI-9609
STI-9609-SS

IMPORTANT

SERVICE

1. Periodic cleaning of the smoke detector is required so dust and other matter
do not accumulate.
2. To service the smoke sensor unit, loosen but do not remove the (4) screws
rotate clamps and carefully remove wire guard.

3 in.(76mm)

Do not attempt to install the wire guard until the smoke sensor has been tested and in proper working
order according to the manufacturers installation instructions furnished with the sensor unit.

INSTALLATION
1. Center the wire guard over existing smoke detector.
2. Mark and drill (4) mounting holes (see pictorial for size). Insert anchor into ceiling. NOTE: If lag
shields and lag bolts are used, make sure anchor is flush with surface. Position guard, insert lag bolts
and tighten. Length of bolt should be selected to assure full thread engagement in anchor.
STI-8170 BACKPLATE

1. SUB-82 - #8 x 1 1/2 spanner tamper resistant stainless steel screw kit.


2. 19038 - #8 spanner bit with 5/16 hex drive.

APPROVALS

STI-9601, STI-9602, STI-9604, STI-9605


UL Listed No. S3504 for use with Listed low profile smoke detectors
STI-9609, STI-9610
UL Listed No. S3504 for use with Listed high profile smoke detectors

(OPTIONAL)
3. STI-8170

BACKPLATE - STI recommends the use of this plate on all unstable mounting surfaces.
4. Insert screws through clamps and backplate (if used) and screw into anchors; but do not tighten.
5. Position guard over detector, slide clamps onto top wire of guard and tighten screws.

Electronic warranty form at www.sti-usa.com/wc14

INSTALLATION OF STI CEILING MOUNTED SMOKE DETECTOR GUARDS

All specifications and information shown were current as of publication and are subject to change without notice.
9600 MARCH 2013

ADDITIONAL WIRE GUARDS AVAILABLE


Visit www.sti-usa.com for complete details

SMOKE DETECTOR COVERS


STI-9601
Low profile - Flush mount
STI-9601-SS Low profile - Flush mount Stainless Steel
STI-9602
Low profile - Surface mount
STI-9604
Mini - Flush mount
STI-9604-SS Mini - Flush mount -Stainless
Steel
STI-9605
Mini - Surface mount
STI-9605-SS Mini - Surface mount Stainless Steel
STI-9609
High profile - Flush mount

BEAM SMOKE DETECTORS


STI-9609-SS High profile - Flush mount Stainless Steel
STI-9610
High profile - Surface mount
STI-9712
Photoelectric - Surface mount
STI-9713
Photoelectric - Flush mount

Corner Mount
Corner Mount
6.25 x 4 x 2.25
7 x 5.75 x 4.50
8.75 x 4 x 3.75

STI-9625

CLOCK/BELL WIRE CAGES


STI-9604-SS

STI-9601

STI-9621

STI-9618

STI-9631
STI-9631-SS
STI-9631-R
STI-9632
STI-9632-SS
STI-9633

STI-9709

10.5 x 13.75 x 2.75


15.5 x 20.5 x 6

10.5 Diameter
10.5 Diameter Stainless Steel
10.5 Diameter Red
16.5 Diameter
16.5 Diameter Stainless Steel
20 Diameter

STI-9632

BAY LIGHT WIRE CAGES


STI-9702

EXIT SIGN WIRE CAGES


STI-9640
STI-9740

STI-9706
STI-9707

For DS240 and DS241


For Fireray 50/100R
For System Sensor Beam
Smoke Detector 6424
Flush Mount
Surface Mount
STI-9624

PIR GUARDS
STI-9618
STI-9619
STI-9620
STI-9621
STI-9622

STI-9623
STI-9624
STI-9625

For Hubbell Superbay Lights


21.43 x 22.50
For Hubbell Superbay Lights 24.5
x 26
STI-9702

STI-9640

EMERGENCY LIGHT CAGES


STI-9641
STI-9644
STI-9645
STI-9649
STI-9703

BEACON & SOUNDER CAGES


STI-9614
STI-9615
STI-9617
STI-9664
STI-9665

10.7 x 14.6 x 4
8.7 x 17.7 x 5
13.8 x 21.7 x 5.9
10.75 x 24.75 x 11.25
5 x 13.5 x 4

7.9 x 6
3.7 x 3.5
5.9 x 4.9
3.86 x 6.18
7 x 8.43
STI-9615

STI-9664

STI-9649

MISCELLANEOUS WIRE CAGES


STI-9651
STI-9705
STI-9708
STI-9711
STI-9714
STI-9716

Fluorescent Light Damage Stopper


Horn/Strobe/Speaker Damage Stopper Flush
Horn/Strobe/Speaker Damage Stopper Surface
Horn/Strobe/Speaker Damage Stopper Flush
Horn/Strobe/Speaker Damage Stopper Surface
Camera Damage Stopper

STI Waterford MI 800-888-4784

STI-9717
STI-9720
STI-9730
STI-9796
STI-9880
STI-9881

Speaker/Strobe Damage Stopper Flush


Speaker Strobe Damage Stopper Surface
Wire Guard Damager Stopper
Outdoor Light Damage Stopper
Fluorescent Lighting Damage Stopper Small
Fluorescent Lighting Damage Stopper Large

STI-9705

STI-9796

STI-9880

JUNE2014

Vous aimerez peut-être aussi