Académique Documents
Professionnel Documents
Culture Documents
FOR PRESSURE
APPLICATIONS
Since it's establishment in 1960 by PLASSIM INFRASTRUCTURE LTD.
it’s sole owner, Kibbutz Merchavia,
Israel’s leading plastic pipe producer manufacturing products according
PLASSIM has been an innovator.
to Israeli and International standards.
Today PLASSIM is the largest
plastic pipe producer in Israel and
the surrounding areas and is PLASSIM FITTINGS LTD.
Specialising in the design and manufacture of couplings for PE pipes
PIPING SYSTEMS
involved through it's daughter
companies in: for water supply as well as specialised fittings for communication FOR SEWERS
ducts, drip irrigation lines and universal couplers. AND DRAINS
• Piping for infrastructure,water
supply, irrigation, sewerage,
industry, telecommunications PLASSIM ADVANCED SOLUTIONS
and construction. IN SANITATION LTD.
• Fittings for water supply, communication ducts and irrigation. HDPE systems for domestic waste-water as well as flushing systems,
taps and bathroom accessories.
The company's head office and plants are situated in the Jezreel PIPING SYSTEMS
Valley in the North of Israel, near the towns of Afula and Nazareth. ROMPIPES ENTERPRISES FOR SOIL, WASTE
It has two automated plants equipped with injection molding machines In 2005 PLASSIM acquired 51% of this company, manufacturing PE- AND VENT
and extrusion lines. X/AL/PE-X pipes for hot and cold water supply.
Sanitary • The Black Line, HDPE Pipes and fittings for domestic waste water and soil discharge
Systems: • The White Line, Sanitary products including cisterns, urinals, electronic valves etc.
• Bathroom fixtures and taps
R1
30°
R1
O 60°
15
1
-01
-"4
011
pkx
TOUGH DURABLE
S1
SOLUTIONS FOR
PRESSURE S2
D8
APPLICATIONS
IN PE,PP AND PVC-U di
2
87 Z
SYSTEMS FOR
DRAINAGE AND
SEWERAGE FROM
PVC-U AND PE
1
MERIFLEX PE PIPES for • High ring stiffness Characteristics
• Low depreciation and maintenance costs • Good chemical resistance
PRESSURE MAINS (life-span of 100 years ) • Excellent corrosion resistance
• A wide range of fittings and accessories available • Good abrasion resistance
Plassim’s HDPE pressure pipes are the ideal solution for the
• High rigidity with high resistance to fracture
transport of sewage under pressure due to their smooth surface,
Standards • Immunity to biological attack
outstanding chemical and corrosion resistance and long service
• Smooth internal surface preventing build up of deposits
life. Plassim’s PE pressure pipes for general purpose, drainage and
• Easily joined with integral sockets – no specialised equipment
sewerage are produced according to EN 13244.
necessary.
Applications • A wide range of fittings and accessories available
For the transport of sewage and other liquids and slurrys under
pressure. MERIBIV and MERIBIV FOAM CORE Standards
PVC-U GRAVITY DRAIN AND SEWER Plassim’s standard PVC-U gravity sewer pipes are produced
Range according to Israeli Standard 884, EN 1401and ISO 4435. The
PIPES foam core version is produced to Israeli Standard 4299
Diameters:110mm – 710mm
Pressure ratings from PN4 – PN16 and EN 13476.
The industry standard for gravity sewer and drain, Plassim has
Dimensions: SDR11 – SDR33 (Other dimensions can be been producing PVC-U pipes for over 40 years.
produced by special application)
Material: PE63, PE80, PE100 Applications
Characteristics For buried sewers and drains as well as for soil, waste and
venting applications inside buildings.
• Weldability - using simple butt-fusion or electro-
fusion techniques giving a continuous, leak-free system. Range
• Coils or drums in long lengths reducing joins
• Welding out of the trench allowing narrow trenching Plassim produces Meribiv pipes in two versions: standard and
• Contouring along crooked and uneven trenches light weight foam core.
• Outstanding resistance to subsidence and earthquake
• Low temperature resistance – pipes remain intact Standard version: Diameters: 110mm – 710mm
and undamaged even after freezing. Foam core version: Diameters: 110mm – 500mm
• Excellent corrosion resistance Both versions are produced with nominal stiffness:
• Excellent chemical resistance SN4 and SN8
• Excellent abrasion resistance Joints: integral socket with rubber seal
d
TOTAL SOLUTIONS Z1
0
Z
DE
DE
Z2
DE
HDPE PIPING SYSTEMS MERISAR PP SOIL, WASTE and VENT MERISAR PVC-U and MERIZIV PVC
Plassim manufactures HDPE pipes to provide a universal piping
SYSTEM PVC-U SOIL, WASTE AND VENT PIPES
system from roof to underground. Easy to install with excellent chemical and physical properties Simple installation inside buildings.
these pipes are exceptionally suitable for household waste
Applications discharge installations. Applications
For discharge of soil and waste inside buildings and underground. For waste and vent systems inside buildings.
Applications Merisar (HD) pipes may also be used for underground drainage
Range For hot and cold drainage systems inside buildings including inside the building structure.
household and industrial applications. Meriziv pipes can be used as drainpipes for roof gutters.
Diameters: 32mm – 315mm
Material: PE80
Range Range
Characteristics Diameters: 32mm – 110mm Diameters: 50mm – 160mm
• Weldability - using simple butt-fusion or electro-fusion Joints: integral socket with rubber seal or plain ends. Joints: integral socket with rubber seal.
techniques giving a continuous, leak free system.
• High temperature resistance to 80°C – short periods of up Characteristics Characteristics
to 100°C allowed • Good chemical resistance • Good chemical resistance
• Low temperature resistance – pipes remain intact and • Good corrosion resistance • Good corrosion resistance
undamaged after freezing • High temperature resistance • Good abrasion resistance
• All pipes are tempered after manufacture to secure • Smooth internal surface preventing build up of deposits • Smooth internal surface preventing build up of deposits
dimensional stability • Easily joined with integral sockets – no specialised • Easily joined with integral sockets – no specialised
• Excellent corrosion resistance equipment necessary. equipment necessary.
• Excellent chemical resistance • A wide range of fittings and accessories available
• Excellent abrasion resistance
Standards
• Can be embedded in concrete Standards
• Low depreciation and maintenance costs (100 year lifespan) Plassim’s Merisar PVC pipes are produced according to
• An exceptionally large range of fittings and accessories Plassim’s Merisar PP pipes are produced according to Israeli Israeli Standard 576.
available Standard 958, EN 1451and ISO 7671.
Standards
HDPE pipes are produced according to Israeli Standard 4476,
EN 1519, ISO 8770, DIN 19535 and DIN 19537.
t
PIPING SYSTEMS L1
FOR CABLE DUCTS L
AND CONDUITS
Applications Meriflex pipes are produced according to Israeli Standard 1531 Produced according to Israeli Standard 858 and 532
and 499, DIN 8074, EN 12201and ISO 4427 and ISO 4422.
For underground installations of conduits and ducts for fibre-
optic, electrical, telecommunication and TV cables.
Diameters:12mm – 710mm Plassim’s PVC piping is widely used for the jacketing of
Dimensions: SDR11 – SDR33 (Other dimensions can be underground cables by the Israel Electric Corporation and
produced by special application) Bezeq, the national telephone company.
Material: PE80, PE100
Available in coils, on drums or various pipe lengths. Applications
H
FITTINGS FOR USE
WITH PE PIPES IN A
MULTITUDE OF
APPLICATIONS L
PLASSIM COMPRESSION FITTINGS COMFIT CABLE DUCT COUPLERS Range NIR PVC FITTINGS
PE pipe diameters from 25mm – 40mm to join various pipes
In use all over the world for PE pipes from 16mm to 110mm. The industry standard for easy connection of cable ducts. from 15mm – 35mm Applications
For irrigation, mining and industry.
Applications Applications Characteristics
For water distribution (including potable water), irrigation, For joining cable ducts. • Materials: PP-B Nut, Body and Stopper; POM Grip ring Range
industrial, mining and telecommunication apllications. and Thrust ring; NBR seal
• For connection to galvanised, lead, copper and PVC pipes Diameters 16mm – 20mm
Range
Range • Semi push-fit installation of PE pipe
Diameters: 32mm – 50mm • Approved by WRAS, UK to 16 bar Characteristics
16 bar: Diameters: 16mm – 63mm • The Unifit conversion kit can convert any regular
16 bar: Diameters: 75mm – 110mm • Material: Body PVC-U
Characteristics compression fitting to a Unifit Coupler • Good chemical resistance
• Materials: PP-H Nut and Body, POM Grip ring, NBR Seal. • Straight couplers, elbows and tees available • ISO 7 threads
Characteristics
• For use with PE pipes according to Israeli Standards 499 • Straight couplers, elbows and tees available
• Materials: PP-B Nut and Body, Acetal Grip ring, NBR seal. and 1531, EN 12201, DIN 8074 and ISO 4427
• For use with PE pipes according to Israeli Standard 499,
EN 12201, DIN 8074 and ISO 4427
• Full push-fit installation – no dismantling required MEITAL DRIP IRRIGATION FITTINGS
• Streamlined shape for use with plowers
• ISO 7 threads • High pull-out resistance
• Semi push-fit installation – no need to completely dismantle Applications
• Airtight to 10 bar
the fitting • Colour: Grey For drip irrigation lines.
• Colour: Black • Approved by many telecommunications companies around
• Approved by 14 countries around the world the world Range
• A large range of fittings available
Diameter: 16mm
Standards
UNIFIT TRANSITION FITTINGS Characteristics
Produced according to Israeli Standard 5283, DIN 8076-3, BS
6572, AS 4129, UNI 9561 and ISO 14236. Exceptionally versatile coupler utilising Plassim’s standard body • Material: Body and Insert PP-H; Grip Ring POM
to connect to a variety of pipes. • To join PE pipes with diameters 16mm – 17mm and wall
thickness 0.7mm – 1.7mm.
• Semi push-fit installation
Applications • ISO 7 threads
For the connection of PE pipes to other pipe materials. • Straight couplers, elbows and tees available