Académique Documents
Professionnel Documents
Culture Documents
QualiPoc
Android
Getting Started
(I_)
Getting Started
7825476277 01
The firmware of the instrument makes use of several valuable open source software packages. For information, see the "Open
Source Acknowledgement" on the user documentation CD-ROM (included in delivery).
Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.
SwissQual AG
Allmendweg 8, 4528 Zuchwil, Switzerland
Phone: +41 32 686 65 65
Fax:+41 32 686 65 66
E-mail: info@swissqual.com
Internet: http://www.swissqual.com/
Printed in Germany Subject to change Data without tolerance limits is not binding.
R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
SwissQual has made every effort to ensure that eventual instructions contained in the document are adequate and free of errors and
omissions. SwissQual will, if necessary, explain issues which may not be covered by the documents. SwissQuals liability for any
errors in the documents is limited to the correction of errors and the aforementioned advisory services.
Copyright 2000 - 2015 SwissQual AG. All rights reserved.
No part of this publication may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any
human or computer language without the prior written permission of SwissQual AG.
Confidential materials.
All information in this document is regarded as commercial valuable, protected and privileged intellectual property, and is provided
under the terms of existing Non-Disclosure Agreements or as commercial-in-confidence material.
When you refer to a SwissQual technology or product, you must acknowledge the respective text or logo trademark somewhere in
your text.
SwissQual, Seven.Five, SQuad, QualiPoc, NetQual, VQuad, Diversity as well as the following logos are registered trademarks of SwissQual AG.
Diversity ExplorerTM, Diversity RangerTM, Diversity UnattendedTM, NiNA+TM, NiNATM, NQAgentTM, NQCommTM, NQDITM, NQTMTM,
NQViewTM, NQWebTM, QPControlTM, QPViewTM, QualiPoc FreeriderTM, QualiPoc iQTM, QualiPoc MobileTM, QualiPoc StaticTM, QualiWatch-MTM, QualiWatch-STM, SystemInspectorTM, TestManagerTM, VMonTM, VQuad-HDTM are trademarks of SwissQual AG.
SwissQual...QualiPoc
Contents
Contents
1 Introduction............................................................................................ 5
1.1
Service Tests................................................................................................................. 5
1.2
Related Documents.......................................................................................................5
2 Using QualiPoc.......................................................................................6
2.1
QualiPoc Workspace.................................................................................................... 6
2.1.1
Menus............................................................................................................................. 7
2.1.1.1
Main Menu...................................................................................................................... 7
2.1.1.2
Actions Menu.................................................................................................................. 8
2.1.2
2.2
QualiPoc Settings......................................................................................................... 9
2.3
2.3.1
2.3.2
2.3.3
2.4
2.4.1
2.4.1.1
2.4.1.2
2.5
SwissQual...QualiPoc
Contents
SwissQual...QualiPoc
Introduction
Service Tests
1 Introduction
QualiPoc Android has been designed for handheld radio network optimization and
quality assessment. This software supports a variety of devices and technologies
including GSM, GPRS, EDGE, WCDMA, HSDPA, HSUPA and LTE. Due to the ease of
use, you can use QualiPoc to collect data and voice services statistics.
QualiPoc fully supports Android motions and gestures as well as touch and double-tapping.
CALL: Uses the Call2anynumber test to set up a speech call connection to a number that automatically responds. Uses the Speech MOC test to measure intrusive
speech quality (MOS) on speech call connection to a responding station. The
answering station job could be used to answer calls for a MOC DL job.
Multi-Data, Multi-Mix, Multi-RAB, and Parallel: Execute data and call tests
sequentially or in parallel.
You can also execute multi-RAB tests in random order.
Idle Monitoring: Allows you to monitor and to store RF parameters during normal
use of the phone when QualiPoc is idle.
SwissQual...QualiPoc
Using QualiPoc
QualiPoc Workspace
2 Using QualiPoc
The following section provides an overview on how to use QualiPoc. For more information, see the Manual - QualiPoc Android.pdf document.
Main menu
Side menu that contains the monitors for your measurements, for example, the
"Status" monitor
Context menu
that contains commands that are specific to the screen or QualiPoc monitor you are in
For more information on the menus, see chapter 2.1.1, "Menus", on page 7.
For a description of the available monitors see the
Manual - QualiPoc Android.pdf document.
SwissQual...QualiPoc
Using QualiPoc
QualiPoc Workspace
To view detailed information of a parameter on a monitor, for example, "MaxTxPower" or "RSSI", touch the parameter.
2.1.1 Menus
This section describes the menus that are available in QualiPoc.
2.1.1.1
Main Menu
The main QualiPoc commands are available through the menu icon
screen as well as the physical menu button of the QualiPoc device
SwissQual...QualiPoc
Using QualiPoc
QualiPoc Workspace
Description
"Jobs"
"Results"
"Settings"
"Help"
"About"
Opens a screen where you can view information about QualiPoc or update QualiPoc
"Exit"
2.1.1.2
Actions Menu
You can access the Actions men with the down arrow
The toolbar allows you to quickly perform the following actions when you monitor a
test.
Table 2-2: Description of the icons on the QualiPoc main toolbar
Icon
Name
Description
"Forcing"
"Freeze"
"Screenshot"
SwissQual...QualiPoc
Using QualiPoc
QualiPoc Settings
Icon
Name
Description
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
Note: If the screen already contains a job, touch the drawer icon
"Add job" icon, enter a name for the job, and touch "OK".
, touch the
If the phone contains jobs that you created with a QualiPoc version older than 15.0,
QualiPoc prompts you to migrate the job files to the new version. To access this
option again, touch the drawer icon , touch the context menu
for the "All job
folder" screen, and touch "Import legacy jobs".
10
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
2. On the "Select job type" screen, touch a job group, and then touch a job.
3. Touch and specify the basic settings for the job, for example, the name of the
"Host".
11
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
Expand /
Collapse test
/ job list
Tip:
To undo your recent changes, touch the main menu , and touch "Revert job".
This option reverts the job settings to the last time that you started QualiPoc.
12
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
To select an access point for the job, touch the "Access points" icon
To enable packet capture for the measurement, touch the "Packet Capture"
icon .
13
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
14
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
5.
, and touch
"Single job": Generates one measurement file for the entire job
"Job sequence": Specify "Forcing", "APN", and "PCAP capture" options for
each job in the sequence.
A "Job sequence" generates a measurement file for each execution of each job
in the sequence.
15
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
To assign a name to the job, touch and hold the name of the job, touch the
context menu , and touch "Rename".
To change the name of the job file in the QualiPoc/Jobs folder, touch the
drawer icon
at the bottom of the screen, touch the context menu for the job
, and touch "Rename."
16
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
17
SwissQual...QualiPoc
Using QualiPoc
Creating and Running a Measurement Job
If the phone is connected to the charger with a USB cable, the battery might not charge
fast enough to compensate for the power consumption of tests that use HS and LTE
technologies. In such a scenario, the phone can suddenly turn off when the battery
level drops below 5% despite being connected to a charger.
You can view the battery level and free space warnings on the "Log" tab.
Fig. 2-23: Low battery level and low storage warnings on the Log tab
You can view low battery and low disk space alert messages on the "Alerts and
Actions" tab in NQView . You can also find information about task failed starts and running task aborts on the "Log messages" and "System log" tabs.
18
SwissQual...QualiPoc
Using QualiPoc
Managing Measurement Results
To delete results, touch and hold a result in the list, and then touch the delete
icon .
You can touch more than one result.
To upload a measurement file, touch and hold the results file, touch the overflow menu icon , and then touch "Upload".
19
SwissQual...QualiPoc
Using QualiPoc
Managing Measurement Results
20
SwissQual...QualiPoc
Using QualiPoc
Managing Measurement Results
Note: You can also open an existing project with the Download icon
2. Touch the share icon
21
SwissQual...QualiPoc
Using QualiPoc
Managing Measurement Results
2.4.1.2
, and touch
22
SwissQual...QualiPoc
Using QualiPoc
Updating QualiPoc Android
Note: If you do not have the "Update" option, contact our support center.
23
SwissQual...QualiPoc
Using QualiPoc
Updating QualiPoc Android
Please consult the Customer Support Center.pdf document for the best
method to contact us.
If you cannot run the application, go to the system settings of the phone, touch "Security", and then enable the "Unknown Sources" option.
24