Académique Documents
Professionnel Documents
Culture Documents
Products
Contents
Introduction. . . . . . . . . . . . . . . . . . . 522
CAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522
CNA and CNB . . . . . . . . . . . . . . . . . . . . . . . 523
CND and CNF . . . . . . . . . . . . . . . . . . . . . . . 524
CMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
MU 14378 0710
521
Products
Introduction
Housing
Impeller
Bearing bracket
CAL
The CAL fans are roboustly built compact centrifugal fans capable of deliverying medium pressures.
Corrosion Classification
The galvanised version meets the requirements
for operation in medium-level corrosive environ-
Application
In aggressive environments and well-suited for
purposes with high physical loads and long life
requirements.
Ranges
The CAL standard range comprises 24 sizes in the
belt-driven version (impeller diameters from 315
to 1250 mm) and 19 sizes in the directly coupled
version
Hot-dip galvanised
(impeller
diameters
from
630
to
Anti-vibration mountings
Access door on the casing of the fan housing
Construction
The housing, impeller and bearing bracket are
welded.
The fan is available in belt-driven or directly coupled versions.
The fan shaft is supported in two-part steel bearing housings with spherical roller/ball bearings.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
522
Introduction
Products
Corrosion Classification
Application
In marine ventilating systems for clean and noncorrosive air, max. 70 C, and with requirements
Technical Specification
The capacities comply with the requirements according to BS 848, Part 1, arrangement D.
Ranges
The CNA is avaiable in 9 sizes with impeller di-
Accessories
lowing pages.
to 1000 Pa.
Control
The CNB is available in 7 sizes with impeller diameters from 400 to 1000 mm.
Air volumes are from 0.8 to 18 m3/s and pressures
up to 1500 Pa.
Construction
sal mounting.
Protection
Casing, CNA/B
Drain connection
sheet, unpainted.
Impeller, CNA 250 to -630
Spot welded, galvanised steel sheet.
Impeller, CNA 710 to -1000
Welded Cor-ten steel sheet, hot-dip galvanised.
Impeller, CNB
Welded Cor-ten steel sheet, hot-dip galvanised.
Inlet Cone CNA/CNB
CNA/B -250 to -630: Hot-dip galvanised deep
drawn sheet, unpainted.
CNA/B -710 to -1000: Cast aluminium, unpainted.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Introduction
523
Products
Accessories
Application
Control
They are suitable for installation in aggressive environments, as they, for example, can withstand
Flexible connections
Mating flange
Ranges
Inspection hatch
The CND is available in 7 sizes with impeller diameters from 315 mm to 710 mm.
Protection
Air volumes are from 0.2 to 10 m /s and pressures up to approx. 2000 Pa.
Drain plug
Wire guards
Anti-vibration mountings
Air volumes are from 0.2 to 11 m3/s and pressures up to approx. 4000 Pa.
Construction
The fan housing is constructed from two rectangular side panels and an all-welded casing.
The fan is available in direct coupled or belt
driven design.
Surface Treatment and Material
All parts of the fans are treated with a 60 m hotdip galvanisation for protection.
Alternatively, by special agreement and at additional cost, the fans can also be made of stainless
steel AISI 316L.
Corrosion Classification
The fans are designed for operation in corrosion
category C5-I (very high), as formulated in DS/
EN ISO 12944-2.
Versions are also available for medium-level corrosive environments in accordance with DS/EN
ISO 12944-2, corrosion category C3.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
524
Introduction
Products
CMP
Accessories
impellers.
Application
Control
Ranges
The CMP fans are available in 5 sizes with impel-
Protection
Wire guards
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Introduction
525
Products
Medium-Pressure Centrifugal
Fans CAL
leaking out.
is necessary.
3
Construction
The fan consists of a robustly welded housing
with angle stiffeners, an impeller, a combined motor and bearing bracket and a support bracket on
the inlet side. The stiffeners and brackets are all
made of strong steel sections.
The base of the brackets forms the base frame of
the fan.
In the belt-driven version, the shaft has spherical
roller or ball bearings in steel bearing housings.
In the directly coupled fan, the impeller is
mounted directly on the motor shaft.
Directly coupled versions with drive-side removable impellers are somewhat different in construction and dimensions compared to those with nonremovable impellers. Exact specifications are
available on request.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
526
Products
Working Ranges
steel.
-6
30
CAL 100%
-7
10
630
82
%
5000
82
%
82% 400
82% - 31
5
6000
82%
- 500
ficiency of 82%.
710
4000
%
82
-8
00
800
500
400
3000
82%
900
900
82%
0
100
82%
0
- 125
82%
0
112
1000
315
1120
1250
2000
1000
0 0
10
15
20
%
82
5000
00
-8
%
82
900
-9
CAL 85%
00
%
82
4000
0
00
-1
82%
20
- 11
82%
0
125
1120
1000
3000
1250
2000
1000
0
10
15
20
7000
CAL 70%
82%
- 80
0
82%
30
82%
-6
8000
82% 500
82% - 4
00
9000
- 71
0
800
400
900
630
%
82
6000
710
5000
%
82
00
-9
0
00
-1
%
82
1120
1000
500
0
12
-1
%
82
0
25
-1
1250
4000
3000
2000
1000
0 0
10
15
20
527
Products
Accessories
mountings for the suction side of the fans are supFlexible Connections
Flexible connections of flameproof material for
max. 80 C and flexible connections of incombustible material for max. 250 C are available for the
inlet and outlet.
plied unfitted.
Inspection Hatch Position on Casing
The inspection hatch on the casing of the fan
housing is positioned differently depending on
fan size.
Inlet
B
56
Motor side
300
200
Inlet side
56
Outlet
100
200
shaft end.
RD0
Mating Flanges
RD180
RD90
45
RD270
135
45
225
225
135
135
225
225
45
LG270
LG90
LG0
LG180
225
45
Anti-Vibration Mountings
45
135
225
135
135
135
225
225
45
135
45
45
Products
Dimensions
CAL 100% Direct Motor Size 160-280
Duct boss
Drain plug 1 RG
Dimensions in mm
CAL
-630
-710
-800
-900
-1000
CAL
-630
-710
-800
-900
-1000
E1
160-180 200-225 250-280
Bu
C1
F1
630
441
449
107
500
584
1019
1199
737
470
710
497
505
121
560
648
1075
1255
831
528
800
560
570
136
630
720
1320
1320
936
600
900
630
640
153
710
800
1390
1390
1560
1053
670
1000
700
710
170
800
880
14604)
1460
1630
1170
754
G1
Pos. 0
Weight 3)
kg
H
J
Pos. 90 Pos. 180 Pos. 270 160-180 200-225 250-280
591
429
630
500
450
800
450
630
64
274
667
483
710
560
500
900
450
630
64
333
752
544
800
630
560
1000
630
630
66
461
845
612
900
710
630
1120
630
630
800
66
578
940
680
1000
800
710
1250
6304)
630
800
66
680
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
u x 15
CAL
-630
-710
-800
-900
-1000
65
70.5
24
55
98.5
26
50
80.0
30
50
115.0
32
50
10 100.0
36
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
529
Products
Drain plug 1 RG
Dimensions in mm
CAL
-1120
-1250
Bu
C1
E1
F1
1120
784
796
190
900
996
1796
1310
845
1250
875
887
213
1000
1100
1887
1463
942
G1
Pos. 0
Pos. 90
Pos. 180
Pos. 270
J
250-280
Weight 2)
kg
1048
762
1120
900
800
1400
850
69
1047
69
1188
H
CAL
-1120
-1250
1169
850
1250
1000
900
1600
850
3)
Outlet Flange
r
CAL
-1120
-1250
r n x 100
T
X
p x 100
S
Y
u x 15
70
11
102
40
85
12
97.5
44
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
530
Products
Drain plug 1 RG
Dimensions in mm
CAL
-315
-400
-500
-630
-710
-800
-900
-1000
CAL
-315
-400
-500
-630
-710
-800
-900
-1000
E1
112-132 160-180 200-225
Bu
C1
F1
315
221
227
54
250
332
797
369
236
400
280
286
68
315
400
856
1036
468
299
500
350
356
85
400
480
926
1106
585
373
630
441
449
107
500
584
1199
1369
737
470
710
497
505
121
560
648
1255
1425
831
528
800
560
570
136
630
720
1320
1490
936
600
900
630
640
153
710
800
1390
1560
1053
670
1000
700
710
170
800
880
1460
1630
1170
754
G1
Pos. 0
H
J
Pos. 90 Pos. 180 Pos. 270 112-132 160-180 200-225
Weight
3)
kg
297
215
315
250
224
450
450
155
62
95
377
272
400
315
280
560
450
630
155
62
158
470
340
500
400
355
710
450
630
155
62
212
591
429
630
500
450
800
630
800
180
64
395
667
483
710
560
500
900
630
800
180
64
460
752
544
800
630
560
1000
630
800
180
66
587
845
612
900
710
630
1120
630
800
180
66
707
940
680
1000
800
710
1250
630
800
180
66
824
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
u x 15
CAL
-315
-400
-500
-630
-710
-800
-900
-1000
57.5
110.5
12
16
50.0
90.0
50.0
75.0
20
65.0
70.5
24
55.0
98.5
26
30
50.0
80.0
50.0
115.0
32
50.0
10 100.0
36
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
531
Products
Drain plug 1 RG
Dimensions in mm
CAL
-1120
-1250
CAL
-1120
-1250
Bu
C1
E1
F1
G1
1120
784
796
190
900
996
1871
1310
845
1048
762
1250
875
887
213
1000
1100
1962
1463
942
1169
850
J1
M1
Weight 2)
kg
Pos. 0
H
Pos. 90 Pos. 180 Pos. 270
1120
900
800
1400
925
600
152
69
1870
1320
1450
1250
1000
900
1600
925
600
152
69
1870
1320
1650
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-1120
-1250
u x 15
70
11 102.0
40
85
12
44
97.5
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
532
Products
Drain plug 1 RG
Dimensions in mm
E1
CAL
-800
-900
-1000
Bu
C1
160-225
250-280
F1
800
476
486
136
630
720
1236
1406
936
600
900
536
546
153
710
800
1296
1466
1053
670
1000
595
605
170
800
880
1355
1525
1170
754
Weight 3)
kg
H
CAL
-800
-900
-1000
G1
Pos. 0
Pos. 90
Pos. 180
Pos. 270
160-225
250-280
752
544
800
630
560
1000
630
800
114
453
845
612
900
710
630
1120
630
800
120
559
940
680
1000
800
710
1250
6304)
800
126
656
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-800
-900
-1000
u x 15
50
88
28
50
118
30
50
10
97.5
34
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
533
Products
Drain plug 1 RG
Dimensions in mm
CAL
-1120
-1250
Bu
C1
E1
F1
1120
667
679
190
900
996
1679
1310
845
1250
744
756
213
1000
1100
1756
1463
942
G1
Pos. 0
Pos. 90
Pos. 180
Pos. 270
J
250-280
Weight 2)
kg
1048
762
1120
900
800
1400
850
136
1021
144
1154
H
CAL
-1120
-1250
1169
850
1250
1000
900
1600
850
3)
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
B
T
X
p x 100
S
Y
CAL
-1120
-1250
u x 15
70
11
93.5
38
85
12
82.0
42
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
534
Products
Drain plug 1 RG
Dimensions in mm
E1
CAL
-800
-900
-1000
CAL
-800
-900
-1000
Bu
C1
160-180
200-225
F1
800
476
486
136
630
720
1236
1406
936
600
900
536
546
153
710
800
1296
1466
1053
670
1000
595
605
170
800
880
1355
1525
1170
754
H
J
Pos. 90 Pos. 180 Pos. 270 160-180 200-225
Weight 3)
kg
G1
Pos. 0
752
544
800
630
560
1000
630
800
180
114
573
845
612
900
710
630
1120
630
800
180
120
688
940
680
1000
800
710
1250
630
800
180
126
798
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-800
-900
-1000
u x 15
50
88
28
50
118
30
50
10
97.5
34
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
535
Products
50
50
C1
25
25
440
1200
25
100
700
Bu
120
CAL
-800
-900
-1000
100
980
17
17
195
E1
1640
1)
G1
53
F1
L
50
Drain plug 1 RG
Dimensions in mm
6 x 15
Bu
C1
E1
F1
800
476
486
136
630
720
1586
936
600
900
536
546
153
710
800
1646
1053
670
1000
595
605
170
800
880
1705
1170
754
H
CAL
-800
-900
-1000
G1
Pos. 0
Pos. 90
Pos. 180
Pos. 270
752
544
800
630
560
1000
114
837
845
612
900
710
630
1120
120
947
940
680
1000
800
710
1250
126
1052
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-800
-900
-1000
u x 15
50
88
28
50
118
30
50
10
97.5
34
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
536
Weight 2)
Products
Drain plug 1 RG
Dimensions in mm
CAL
-1120
-1250
E1
225-250 280-315
Bu
C1
F1
G1
1120
667
679
190
900
996
1754
2054
1310
845
1048
762
1250
744
756
213
1000
1100
1831
2131
1463
942
1169
850
H
CAL
-1120
-1250
Pos. 0
Pos. 90
J
Pos. 180
Pos. 270
225-250
J1
280-315
225-250
K
280-315
225-250
280-315
1120
900
800
1400
925
1225
600
875
152
207
1250
1000
900
1600
925
1225
600
875
152
207
M
CAL
-1120
-1250
M1
225-250
280-315
225-250
136
1870
2050
1320
1500
1425
1655
144
1870
2050
1320
1500
1620
1865
280-315
Weight 2) kg
225-250
280-315
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-1120
-1250
u x 15
70
11
93.5
38
85
12
82.0
42
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
537
Products
Drain plug 1 RG
Dimensions in mm
CAL
-630
-710
-800
-900
-1000
CAL
-630
-710
-800
-900
-1000
E1
160-180 200-225 250-280
Bu
C1
F1
630
309
317
107
500
584
887
1067
737
470
710
348
356
121
560
648
926
1106
831
528
800
392
402
136
630
720
1152
1152
1322
936
600
900
441
451
153
710
800
1201
1201
1371
1053
670
1000
490
500
170
800
880
1250
1250
1420
1170
754
G1
Pos. 0
Weight 3)
kg
591
429
630
500
450
140
257
667
483
710
560
313
752
544
800
630
845
612
900
940
680
1000
H
J
Pos. 90 Pos. 180 Pos. 270 160-180 200-225 250-280
800
450
630
500
900
450
630
149
560
1000
630
630
800
162
436
710
630
1120
630
630
800
174
536
800
710
1250
6304)
630
800
186
629
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
u x 15
CAL
-630
-710
-800
-900
-1000
65
104.5
55
124.0
50
96.0
50
120.5
28
50
10
95.0
32
22
26
20
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
538
Products
Drain plug 1 RG
Dimensions in mm
CAL
-1120
-1250
Bu
C1
E1
F1
1120
549
561
190
900
996
1561
1310
845
1250
613
625
213
1000
1100
1625
1463
942
G1
Pos. 0
Pos. 90
Pos. 180
Pos. 270
J
250-315
Weight 2)
kg
1048
762
1120
900
800
1400
850
203
988
219
1114
H
CAL
-1120
-1250
1169
850
1250
1000
900
1600
850
3)
Outlet Flange
CAL
-1120
-1250
r n x 100
T
X
p x 100
S
Y
70
11
84,5
36
85
12 116.5
38
u x 15
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
539
Products
Drain plug 1 RG
Dimensions in mm
CAL
-400
-500
-630
-710
-800
-900
-1000
CAL
-400
-500
-630
-710
-800
-900
-1000
E1
112-132 160-180 200-225
Bu
C1
F1
400
196
202
68
315
400
772
952
468
299
500
245
251
85
400
480
821
1001
585
373
630
309
317
107
500
584
1067
1237
737
470
710
348
356
121
560
648
1106
1276
831
528
800
392
402
136
630
720
1152
1322
936
600
900
441
451
153
710
800
1201
1371
1053
670
1000
490
500
170
800
880
1250
1420
1170
754
G1
Pos. 0
H
J
Pos. 90 Pos. 180 Pos. 270 112-132 160-180 200-225
Weight
3)
kg
377
272
400
315
280
560
450
630
155
110
154
470
340
500
400
355
710
450
630
155
122
198
591
429
630
500
450
800
630
800
180
140
376
667
483
710
560
500
900
630
800
180
149
440
752
544
800
630
560
1000
630
800
180
162
557
845
612
900
710
630
1120
630
800
180
174
668
940
680
1000
800
710
1250
630
800
180
186
774
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
u x 15
CAL
-400
-500
-630
-710
-800
-900
-1000
50
98.0
14
50
72.5
18
65
104.5
20
55
124.0
22
50
96.0
26
50
120.5
28
50
10
95.0
32
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
540
Products
50
50
C1
25
25
440
1200
25
100
700
Bu
120
CAL
-800
-900
-1000
100
980
17
17
195
E1
1640
1)
G1
53
F1
L
50
Drain plug 1 RG
Dimensions in mm
6 x 15
Bu
C1
E1
F1
800
392
402
136
630
720
1502
936
600
900
441
451
153
710
800
1551
1053
670
1000
490
500
170
800
880
1600
1170
754
H
CAL
-800
-900
-1000
G1
Pos. 0
Pos. 90
Pos. 180
Pos. 270
Weight 2)
kg
752
544
800
630
560
1000
162
820
845
612
900
710
630
1120
174
925
940
680
1000
800
710
1250
186
1025
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-800
-900
-1000
u x 15
50
96.0
50
120.5
50
10
95.0
26
28
32
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
541
Products
Drain plug 1 RG
Dimensions in mm
CAL
-1120
-1250
E1
225-250 280-315
Bu
C1
F1
G1
1120
549
561
190
900
996
1636
1936
1310
845
1048
762
1250
613
625
213
1000
1100
1700
2000
1463
942
1169
850
H
CAL
-1120
-1250
Pos. 0
Pos. 90
J
Pos. 180
Pos. 270
225-250
J1
280-315
225-250
K
280-315
225-250
1120
900
800
1400
925
1225
600
875
152
207
1250
1000
900
1600
925
1225
600
875
152
207
M
CAL
-1120
-1250
M1
280-315
Weight 2) kg
225-250
280-315
225-250
280-315
225-250
203
1870
2050
1320
1500
1390
1620
219
1870
2050
1320
1500
1580
1825
Position of Motor
The position of the motor is in accordance with
Eurovent.
Outlet Flange
r
r n x 100
T
X
p x 100
S
Y
CAL
-1120
-1250
u x 15
70
11
84.5
36
85
12 116.5
38
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
542
280-315
Products
d (h6)
70
140
20
74,5
CAL
1120 & 1250
d (h6)
80
110
22
85
d (h6)
40
80
12
43
d (h6)
80
140
22
85
d (h6)
50
110
14
53,5
60
110
18
64
d (h6)
90
140
25
95
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
543
Products
Dimensioning
315-630 :
C1 = 1.2
710-1000 :
C1 = 1.1
1120-1250 :
C1 = 1.05
Arrangements
p2
p1
p1
p2
p2
p1
p1
p2
ps2 - ps1
Pa
+ p1
Pa
+ pd + p2
Pa
Total pressure
Pa
2000 Pa
The graph on page 545 reveals that type CAL-315
is best suited.
The total pressure is calculated as follows.
ps2 - ps1
2000
Pa
ps2 - ps1
Pa
+ p1
10
Pa
+ p1
Pa
+ pd
102
Pa
+ pd
Pa
Total pressure
2112
Pa
Total pressure
Pa
ps2 - ps1
Pa
+ pd + p2
Pa
Total pressure
Pa
ps2 - ps1
Pa
+ pd
Pa
Total pressure
Pa
= 1.20 kg/m3
Correction:
Efficiency: 81%
Motor: 3 kW
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
544
Products
Performance Curves
Basis for charts
(Arr. D)
Symbols:
pt
total pressure
volume flow
pd
speed, r.p.m.
p1
efficiency, %
p2
kW =
dB
qv
= 1.20 kg/m3
Moment of inertia,
Iv
0.11 kgm2
Circumferential speed,
u
0.016 x n, m/s
CAL400/100
= 1.20 kg/m3
Moment of inertia,
Iv
0.38 kgm2
Circumferential speed,
u
0.021 x n, m/s
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
545
Products
= 1.20 kg/m3
Moment of inertia,
Iv
1.17 kgm2
Circumferential speed,
u
0.026 x n, m/s
Impeller of SAF-2205
Max. 3190 RPM
Impeller of AISI 316L
Max. 2470 RPM
At 45 C max. 2350 RPM
At 70 C max. 2261 RPM
CAL630/100
= 1.20 kg/m3
Moment of inertia,
Iv
3.56 kgm2
Circumferential speed,
u
0.033 x n, m/s
Impeller of SAF-2205
Max. 2920 RPM
At 45 C max. 2715 RPM
At 70 C max. 2601 RPM
Impeller of AISI 316L
Max. 1913 RPM
At 45 C max. 1820 RPM
At 70 C max. 1751 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
546
Products
= 1.20 kg/m3
Moment of inertia,
Iv
5.76 kgm2
Circumferential speed,
u
0.037 x n, m/s
Impeller of SAF-2205
Max. 2440 RPM
At 45 C max. 2270 RPM
At 70 C max. 2174 RPM
Impeller of AISI 316L
Max. 1599 RPM
At 45 C max. 1521 RPM
At 70 C max. 1464 RPM
CAL800/100
= 1.20 kg/m3
Moment of inertia,
Iv
9.31 kgm2
Circumferential speed,
u
0.042 x n, m/s
Impeller of SAF-2205
Max. 2040 RPM
At 45 C max. 1898 RPM
At 70 C max. 1817 RPM
Impeller of AISI 316L
Max. 1337 RPM
At 45 C max. 1272 RPM
At 70 C max. 1224 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
547
Products
= 1.20 kg/m3
Moment of inertia,
Iv
15.0 kgm2
Circumferential speed,
u
0.047 x n, m/s
Impeller of SAF-2205
Max. 1712 RPM
At 45 C max. 1590 RPM
At 70 C max. 1523 RPM
Impeller of AISI 316L
Max. 1120 RPM
At 45 C max. 1066 RPM
At 70 C max. 1026 RPM
CAL1000/100
= 1.20 kg/m3
Moment of inertia,
Iv
23.0 kgm2
Circumferential speed,
u
0.052 x n, m/s
Impeller of SAF-2205
Max. 1461 RPM
At 45 C max. 1358 RPM
At 70 C max. 1300 RPM
Impeller of AISI 316L
Max. 957 RPM
At 45 C max. 910 RPM
At 70 C max. 876 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
548
Products
= 1.20 kg/m3
Moment of inertia,
Iv
35.2 kgm2
Circumferential speed,
u
0.059 x n, m/s
Impeller of SAF-2205
Max. 1233 RPM
At 45 C max. 1146 RPM
At 70 C max. 1097 RPM
CAL1250/100
= 1.20 kg/m3
Moment of inertia,
Iv
54.5 kgm2
Circumferential speed,
u
0.065 x n, m/s
Impeller of SAF-2205
Max. 1046 RPM
At 45 C max. 972 RPM
At 70 C max. 930 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
549
Products
= 1.20 kg/m3
Moment of inertia,
Iv
8.81 kgm2
Circumferential speed,
u
0.042 x n, m/s
Impeller of SAF-2205
Max. 2403 RPM
At 45 C max. 2232 RPM
At 70 C max. 2138 RPM
Impeller of AISI 316L
Max. 1573 RPM
At 45 C max. 1496 RPM
At 70 C max. 1440 RPM
CAL900/85
= 1.20 kg/m3
Moment of inertia,
Iv
14.2 kgm2
Circumferential speed,
u
0.047 x n, m/s
Impeller of SAF-2205
Max. 2016 RPM
At 45 C max. 1871 RPM
At 70 C max. 1792 RPM
Impeller of AISI 316L
Max. 1318 RPM
At 45 C max. 1254 RPM
At 70 C max. 1207 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
550
Products
= 1.20 kg/m3
21.7 kgm2
Circumferential speed,
u
0.052 x n, m/s
Impeller of SAF-2205
Max. 1719 RPM
At 45 C max. 1597 RPM
At 70 C max. 1530 RPM
Impeller of AISI 316L
Max. 1126 RPM
At 45 C max. 1071 RPM
At 70 C max. 1030 RPM
CAL1120/85
= 1.20 kg/m3
Moment of inertia,
Iv
33.4 kgm2
Circumferential speed,
u
0.059 x n, m/s
Impeller of SAF-2205
Max. 1450 RPM
At 45 C max. 1348 RPM
At 70 C max. 1291 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
551
Products
= 1.20 kg/m3
Moment of inertia,
Iv
51.8 kgm2
Circumferential speed,
u
0.065 x n, m/s
Impeller of SAF-2205
Max. 1230 RPM
At 45 C max. 1143 RPM
At 70 C max. 1095 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
552
Products
= 1.20 kg/m3
0.34 kgm2
Circumferential speed,
u
0.021 x n, m/s
Impeller of SAF-2205
Max. 5696 RPM
Impeller of AISI 316L
Max. 4411 RPM
At 45 C max. 4196 RPM
At 70 C max. 4038 RPM
CAL500/70
= 1.20 kg/m3
1.05 kgm2
Circumferential speed,
u
0.026 x n, m/s
Impeller of SAF-2205
Max. 3850 RPM
Impeller of AISI 316L
Max. 3529 RPM
At 45 C max. 3357 RPM
At 70 C max. 3231 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
553
Products
= 1.20 kg/m3
3.20 kgm2
Circumferential speed,
u
0.033 x n, m/s
= 1.20 kg/m3
5.20 kgm2
Circumferential speed,
u
0.037 x n, m/s
Impeller of SAF-2205
Max. 3000 RPM
Impeller of AISI 316L
Max. 2284 RPM
At 45 C max. 2173 RPM
At 70 C max. 2091 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
554
Products
= 1.20 kg/m3
8.40 kgm2
Circumferential speed,
u
0.042 x n, m/s
= 1.20 kg/m3
13.5 kgm2
Circumferential speed,
u
0.047 x n, m/s
Impeller of SAF-2205
Max. 2445 RPM
At 45 C max. 2272 RPM
At 70 C max. 2176 RPM
Impeller of AISI 316L
Max. 1601 RPM
At 45 C max. 1523 RPM
At 70 C max. 1465 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
555
Products
= 1.20 kg/m3
20.6 kgm2
Circumferential speed,
u
0.052 x n, m/s
Impeller of SAF-2205
Max. 2088 RPM
At 45 C max. 1940 RPM
At 70 C max. 1858 RPM
Impeller of AISI 316L
Max. 1367 RPM
At 45 C max. 1300 RPM
At 70 C max. 1251 RPM
For fans used in the shaded areas, it
is necessary to consider whether the
required power can be achieved with
the maximum motor size.
CAL1120/70
= 1.20 kg/m3
31.7 kgm2
Circumferential speed,
u
0.059 x n, m/s
Impeller of SAF-2205
Max. 1761 RPM
At 45 C max. 1636 RPM
At 70 C max. 1567 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
556
Products
= 1.20 kg/m3
49.1 kgm2
Circumferential speed,
u
0.065 x n, m/s
Impeller of SAF-2205
Max. 1494 RPM
At 45 C max. 1388 RPM
At 70 C max. 1329 RPM
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CAL
557
Products
maintenance instructions).
Inlet Cone
Inlet cone fitted in the front side plate of the fan
with boss for duct connection. The inlet cone is
specially designed to guide the air to the impeller
without loss in pressure.
Impeller
The impeller is with broad, backward curved
blades.
Accessories
Motor
The motor is according to specification.
Bearing Assembly
Bearing assembly with two dust and waterproof,
totally enclosed deep groove ball bearings in a
flange bearing casing, mounted on the rear side
plate of the fan or two flange bearings mounted in
two covers.
Surface Treatment
Motor Mounting
For mounting of motors not exceeding the sizes
stated on page 561 for the flanges of the fan casing. The mounting plate is adjustable for tensioning of the belts.
Base Frame
Common base frame for mounting of motors
larger than the sizes stated on page 561 beside the
fan.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
558
Products
Positions
Direction of rotation RD or LG.
Motor positions 1, 2, 3 and 4 refer to the location
of the motor in relation to the outlet opening.
559
Products
Dimensions
Direct coupled
CNA-250, -315, -400
CNA-500, -600
CNB-400
CNB-500, -630
All sizes
Dimensions in mm
CNA
CNB
F1
-250
250
175
30
250
235
310
250
245
200
-315
315
220
30
315
280
410
280
345
250
-400
400
280
30
400
340
485
315
400
300
-500
500
350
35
500
420
600
400
500
350
-630
630
440
35
630
510
758
488
623
440
-710
710
497
40
710
577
870
535
670
465
-800
800
560
40
800
640
976
604
754
516
-900
900
630
45
900
720
1098
680
847
573
-1000
1000
700
45
1000
790
1215
750
940
640
Dimensions in mm
Weight*, kg
CNA
CNB
H1
CNA
-250
560
445
150
207
60
12
22
-315
690
595
160
252
100
12
35
-400
800
700
145
312
100
12
53
55
-500
1000
850
170
392
125
15
89
98
CNB
-630
1246
1063
250
482
125
15
146
161
-710
1405
1135
260
537
63
15
238
262
-800
1580
1270
280
600
85
15
304
334
-900
1778
1420
300
680
110
15
350
385
-1000
1965
1580
360
750
90
15
487
535
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
560
G1
Products
Outlet Flanges
Dimensions in mm
CNA
CNB
-250
207
-315
252
-400
312
85
282
110
110
347
143
140
432
185
-500
386
125
536
155
-630
476
170
666
200
-710
537
150
750
170
-800
600
170
840
175
-900
680
195
950
200
-1000
750
160
1050
180
Counter Flanges
Counter flanges (4 strips) with bolt holes as in the
outlet flanges are available as optional extras.
Ducts
Ducts are made with the same inside dimensions
as the fan outlet opening (A x B).
Motor size
for direct coupled
250
71 90
90
20
90
20
315
71 100
112
40
112
40
400
80 100
112
40
112
40
500
112 132
132
70
132
70
630
160 1
132
70
132
70
710
132
70
160
140
800
132
70
160
40
900
132
70
180 2
190
1000
132
70
180
190
1.
2.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low-Pressure Centrifugal Fans CNA and CNB
561
Products
Position Designations
Position according to EUROVENT
Note
Fan positions for base frame mounting must be in
accordance with EUROVENT
Shaft Extension
CNA
CNB
Fan size
250
24j6
50
27
315
24j6
50
27
400
24j6
50
27
28j6
50
1
41
500
28j6
50
31
38k6
90
10
630
32k6
60
10
35
48k6
90
14
51
710
35h8
100
10
38
55m6
100
16
59
800
40h8
100
12
43
55m6
100
16
59
900
40h8
100
12
43
60m6
115
18
64
1000
55h8
100
16
59
60m6
115
18
64
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
562
Products
Accessories
Types CNA and CNB are available with inspection door in scroll plate of casing and drain connection.
When ordering please state location of inspection
door and drain connection in ralation to the outlet
direction, e.g.
Inspection door pos. RD 120
Drain connection pos. RD 180
Duct Connection
CNA
CNB
250
310
280
250
10
315
385
355
315
10
400
480
450
400
12
500
590
560
500
12
12
630
720
690
630
12
12
710
790
765
710
10
14
800
880
850
800
10
14
900
1000
970
900
16
14
1000
1080
1050
1000
16
14
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low-Pressure Centrifugal Fans CNA and CNB
563
Products
CNA
CNB
Weight
kg
D1
D2
250
377
355
315
250
150
10
70
10
315
482
450
400
315
190
12
87
12
400
592
560
500
400
215
12
12
111
16
500
722
690
630
500
284
12
12
138
25
630
893
860
800
630
365
16
12
174
45
CNA
CNB
710
800
800
765
715
250
10
14
56
880
850
800
250
10
14
74
900
1000
970
900
350
16
15
91
1000
1090
1050
1000
350
16
15
100
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
564
Weight
kg
Products
n=3600
1200
0.025 kgm
3200
1000
95dB
3000
800
2800 92dB
65
1.20 kg/m3
60
Iv
pt, Pa
3400
coupled)
max.=
= 65%
1400
71%
70
max.=
70%
CNA250-D
71%
Performance Curves
50
2600
0.013 x n, m/s
89dB
600
40
2400
220086dB
400
2000
83dB
pd + p 2
p1
0.5
10
20
100
200
300
10
20
m3/s
m/s
200
100
pd
1k
0.
5
0.
0.1
qv
6
0.
0.
4
0.
pd
0.2
0.
200
0.
1800
1600
1400
300
400
Pa
Pa
30
Pa
max.=
3000 r.p.m.
1.20 kg/m3
Iv
0.05 kgm2
0.016 x n, m/s
pt, Pa
CNA315
Sound data:
Symbols:
pt
total pressure
pd
p1
p2
qv
volume flow
speed, r.p.m.
kW =
dB
efficiency, %
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low-Pressure Centrifugal Fans CNA and CNB
565
Products
CNA400
max.=
1950 r.p.m.
Iv
0.175 kgm2
max.=
2380 r.p.m.
Iv
0.3 kgm2
pt, Pa
CNB400
0.021 x n, m/s
1.20 kg/m3
CNA500
max.=
1575 r.p.m.
Iv
0.55 kgm2
max.=
1925 r.p.m.
Iv
0.75 kgm2
pt, Pa
CNB500
0.026 x n, m/s
1.20 kg/m3
Sound data:
Symbols:
pt
total pressure
pd
p1
p2
qv
volume flow
speed, r.p.m.
kW =
dB
efficiency, %
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
566
Products
CNA630
max.=
1240 r.p.m.
Iv
1.35 kgm2
max.=
1515 r.p.m.
Iv
1.85 kgm2
pt, Pa
CNB630
0.033 x n, m/s
1.20 kg/m3
CNA710
max.=
1105 r.p.m.
Iv
3 kgm2
max.=
1350 r.p.m.
Iv
3 kgm2
pt, Pa
CNB710
0.037 x n, m/s
1.20 kg/m3
Sound data:
Symbols:
pt
total pressure
pd
p1
p2
qv
volume flow
speed, r.p.m.
kW =
dB
efficiency, %
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low-Pressure Centrifugal Fans CNA and CNB
567
Products
CNA800
max.=
975 r.p.m.
Iv
5 kgm2
max.=
1190 r.p.m.
Iv
5 kgm2
pt, Pa
CNB800
0.042 x n, m/s
1.20 kg/m3
CNA900
max.=
870 r.p.m.
Iv
7.75 kgm2
max.=
1065 r.p.m.
Iv
7.75 kgm2
pt, Pa
CNB900
0.047 x n, m/s
1.20 kg/m3
Sound data:
Symbols:
pt
total pressure
pd
p1
p2
qv
volume flow
speed, r.p.m.
kW =
dB
efficiency, %
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
568
Products
CNA1000
max.=
785 r.p.m.
Iv
14 kgm2
max.=
960 r.p.m.
Iv
14 kgm2
pt, Pa
CNB1000
0.052 x n, m/s
1.20 kg/m3
Sound data:
Symbols:
pt
total pressure
pd
p1
p2
qv
volume flow
speed, r.p.m.
kW =
dB
efficiency, %
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low-Pressure Centrifugal Fans CNA and CNB
569
Products
and compact low- and medium pressure fans designed for installation in aggressive environments.
Motors
The type CND is produced in 7 sizes with impeller diameters from 315 mm to 710 mm, airflow
rates from 0.2 m3/s to 10 m3/s and total pressures
up to approximately 2000 Pa.
Environment
components.
All parts of the fans are treated with a 60 m hotdip galvanisation for protection.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
570
Products
Accessories
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
571
Products
Dimensions
H
45
B1
A1
A
E
G
CND/CNF
Size
1.
A
A1
B
B1
C
D
E
F1
G
H
J
K
L approx.
S
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
[mm]
[mm]
315
690
410
595
345
252
315
280
ML-24
297
525
11.5
335
1,040
100
400
800
485
700
400
312
400
340
ML-24
357
585
11.5
430
1,120
125
450
891
543
760
445
347
450
375
ML-29
392
655
14
480
1,175
125
500
1,000
600
850
500
392
500
420
ML-29
443
690
14
535
1,255
125
560
1,121
673
953
560
437
560
465
ML-29
488
795
14
595
1,440
125
630
1,246
760
1,063
622
482
630
510
ML-26
533
840
14
665
1,525
125
710
1,405
869
1,135
672
537
710
577
ML-31
595
910
14
750
1,620
125
Weights
CND/CNF
Size
315
62
400
59
78
450
77
100
500
84
118
560
113
165
630
153
206
710
187
255
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
572
Products
Outlet Flanges
Mating flanges with the same size bolt holes as
G
P stk. x R
NxT
MxK
B).
B
CND/CNF
Size
A
[mm]
B
[mm]
C
[mm]
F
[mm]
G
[mm]
K
[mm]
315
315
220
30
347
252
110
400
400
280
30
432
312
140
M
[mm]
N
[mm]
T
[mm]
P
[qty.]
R
[mm]
142,5
10
185
10
450
450
315
30
482
347
125
185
12
500
500
350
35
536
386
125
155
14
560
560
395
35
596
431
125
155
14
630
630
440
35
666
476
170
200
14
710
710
497
40
750
537
150
170
18
10
RD 90
RD 180
RD 270
LG 0
LG 90
LG/1
LG/2
LG 180
LG/3
LG 270
LG/4
Belt
drive
with
motor
RD/1
RD/2
RD/3
RD/4
The positions are according to EUROVENT and seen from the motor side.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
573
Products
Pos. LG
Pos. RD
Motor Sizes
CND/CNF
Size
- 80
- 90
- 100
Motor Size
- 112
315
- 132
400
450
500
- 160
560
630
710
- 180
*
*
of the fan.
Max. RPM
The CND and CNF share the same design and are
Max. RPM
CND/CNF
Size
CND
315
4618
5874
400
3426
4090
450
2957
3365
500
2592
2927
560
2249
2464
630
2086
2387
710
1797
1994
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
574
CNF
Products
Motor Installation
The maximum allowable motor sizes that can be
installed directly on the fans appear from the below tables
Motor on side
- vertical motor panel
CND/CNF
Size
Motor on top
- horizontal motor panel
Max. Motor
Type Weight [kg]
CND/CNF
Size
Max. Motor
Type Weight [kg]
315
80 - 112
315
112
40
315
112
40
400
80 - 132
400
112
40
400
112
40
450
80 - 132
450
112
40
450
112
40
500
80 - 132
500
132
70
500
132
70
560
100 - 160
560
132
70
560
132
70
630
100 - 160
630
132
70
630
132
140
710
112 - 180
710
132
70
710
160
140
Shaft End
CND/CNF
Size
315
28h6
30
31
400
28h6
30
31
450
38h6
50
10
41
500
38h6
50
10
41
560
48h6
70
14
51
630
48h6
70
14
51
710
65h6
70
18
69
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
575
Products
Dimensioning Curves
The shaded areas in the below figures indicate the
maximum working ranges for the standard motor
sizes.
Da
3 x Da
D1
1 x D1
CND-315
Max.
Ipt
Symbols
Pt = Total pressure
qv
= Volume flow
= RPM
= efficiency in %
6000
= 4,618 RPM
= 0.0951 kg x m
60
70
65
70
74
74
Pt,
Pa
65
5000
2
109 dB
4000
CNF-315
Max.
= 5,874 RPM
Ipt
= 0.0951 kg x m2
106 dB
3000
400
103 dB
350
000
2000
100 dB
97 dB
0
250
94 dB
91 dB
Pd
Pd + P2
P1
10
4.5
0.5
qv
2.2
1.5
30
20
40
1000
500
1000
500
50
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
3 m3/s
m/s
2.5
1.5
88 dB
7.5
200
9k
1000
576
60%
1500
100
Pa
Pa
Pa
Products
CND-400
CNF
CND
Max.
= 3,426 RPM
Ipt
= 0.2440 kg x m2
5000
60
Pt,
Pa
= 4,090 RPM
Ipt
= 0.2440 kg x m2
300
103 dB
2000
100 dB
250
97 dB
200
94 dB
91 dB
Pd + P2
P1
CND-450
20
40
30
200
300
400
500
600
500
20
10
CND
m3/s
m/s
10
800
50
60
65
Max. speed = 33
n
CNF
65 70
60
75
77
70
77
Ipt
= 0.4218 kg x m2
Pa
80
90
70
75
65
106 dB
3000
= 3,365 RPM
Pa
Pa
CNF-450
Max.
900
1000
40
30
700
CNF
4000
pt,
Pa
100
kW
Pd
85
7.
7
qv
Pd
10
9
= 0.4218 kg x m2
60%
106 dB
150
Ipt
70
65
= 2,957 RPM
75
77
3000
1000
Max.
77
4000
CNF-400
Max.
75
70
65
60%
260
103 dB
2000
100 dB
220
97 dB
0
180
1000
94 dB
91 dB
10
140
qv
Pd
Pd + P2
P1
kW
3
5 m /s
m/s
10
20
100
200
30
300
10000
10
20
400
500
20000
30
40
40
600
700
30000
50
60
Pa
Pa
Pa
70
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
577
Products
CND-500
CND
Max.
= 2,592 RPM
Ipt
= 0.6430 kg x m2
pt,
Pa
Max. speed
CNF
Ipt
= 0.6430 kg x m2
7
292
60
65
75
70
79
79
75
70
2
Max. speed
259
CND
CNF-500
= 2,927 RPM
n=
106 dB
3000
Max.
CNF
4000
65
103 dB
60%
0
220
2000
100 dB
0
180
97 dB
94 dB
0
150
1000
91 dB
9
k
11
0
120
Pd
Pd + P2
P1
qv
6 m3/s
m/s
CND-560
= 2,249 RPM
Ipt
= 1.0212 kg x m2
Max.
= 2,464 RPM
Ipt
= 1.0212 kg x m2
30
200
300
400
500
Pa
600
500
10
20
700
1000
30
40
50
60
Pa
Pa
70
CNF
60
65
70
80
75
81
81
80
75
Max. speed
4
246
CNF
n=
3000
pt,
Pa
CNF-560
20
100
CND
Max.
10
Max. speed
9
CND
224
70
65
2000
190
60%
106 dB
160
1000
103 dB
0
130
100 dB
97 dB
94 dB
91 dB
Pd + P2
P1
Pd
7
6
qv
k
11
10
100
7 m3/s
m/s
30
20
10
100
200
300
400
20
30
40
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
578
600 Pa
10000
5000
10
500
Pa
50
Pa
60
Products
CND-630
CNF
CND
Max.
= 2,086 RPM
Ipt
= 2.2571 kg x m2
4000
Max. speed
387
n=2
CNF
pt,
Pa
Max.
= 2,387 RPM
Ipt
= 2.2571 kg x m2
70
83
80
75
80
83
75
Max. speed
2086
CND
3000
CNF-630
60 65
109 dB
1800
70
65
106 dB
2000
60%
1600
103 dB
1400
1000
100 dB
97 dB
1200
94 dB
1000
18
kW
14
16
12
qv 1
10
m /s
m/s
CND-710
Pd
Pd + P2
P1
CND
Max.
= 1,797 RPM
IVent
= 3.6479 kg x m2
= 1,994 RPM
IVent
= 3.6479 kg x m2
10
30
20
100
200
300
10
20
30
400
500
600
40
50
60
500
Pa
700 Pa
1000 Pa
70
CNF
94
Max. speed
19
CNF
n=
60 65
70
75
75
80
84 84
80
3000
pt,
Pa
109 dB
CNF-710
Max.
106 dB
1600
65
2000
60 %
103 dB
1400
100 dB
1200
1000
97 dB
1000
94 dB
kW
18
20
16
14
10
12
8
6
0
0
qv
Pd
Pd + P2
P1
20
100
m /s
10
5
10
200
m/s
30
300
400
500
Pa
600
500
10
20
30
700
1000
40
50
60
Pa
Pa
70
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
579
Products
Accessories
Duct bosses
These are fitted as standard on both the CND and
CNF.
Loose duct bosses are available for connection of
ducts with flexible connections.
Material: Steel
Surface treatment: Hot-dip galvanised, approx.
60 m
Duct bosses
Flexible Connections
These are for duct bosses and outlet flanges and
available in both flameproof and incombustible
materials.
Material quality: Perl E 6
Temperature range: -30 to +80 C
Material quality: Alpha Maritex
Temperature range: -36 to +260 C
Flexible Connections
Inlet
Outlet
Mating Flanges
These are or installation on the outlet of the fan.
The mating flanges are made of welded steel
frames.
Material: Steel Domex 240
Surface treatment: Hot-dip galvanised, approx.
60 m.
Mating Flanges
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
580
Products
Wire guards
These are available for both inlets (circular) and
outlets (square).
Material: Steel wire
Surface treatment: Electrogalvanised, approx.
20 m
Finish treatment: Passivated
Wire guards
Anti-Vibration Mountings
Both the CND and CNF are available with anti-vibration mountings.
Refer to the installation instructions for details on
the different kinds of mountings and their locations.
Anti-Vibration Mountings
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Low- and Medium-Pressure Centrifugal Fans CND and CNF
581
Products
Inspection Hatch
The CND and CNF are both available with an inspection hatch located in the casing of the housInspection hatches are available in 2 sizes, de-
300
200
ing.
pending on the fan size.
Please state the location of the inspection hatch
and drain plug in relation to the outlet direction
on order. See example below.
100
200
Inspection Hatch
Drain Plug
Inspection Hatch
Drain Plug
Please state the location of the drain plug in the
side panels of the fan housing in relation to the
outlet direction on order.
Material: Stainless steel and hot-dip galvanised
fittings respectively.
Connection: 3/4 RG
Drain Plug
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
582
Products
Medium-Pressure Centrifugal
Fans CMP
Technical Characteristics
Model
CMP-512-2T 2850
0.55
0.32
0.08
0.13
CMP-514-2T 2850
1.21
0.70
0.18
0.28
CMP-616-2T 2740
1.73
1.00
0.37
0.40
CMP-718-2T 2855
3.00
1.73
0.75
0.39
CMP-820-2T 2845
4.16
2.40
1.10
0.54
The CMP fans are made of sheet steel with impeller blades of galvanised sheet steel. Optionally the
fans can also be delivered in stainless steel.
The fans are available as single or two-speed versions in five sizes. Impeller diameters are from
Motors
Main Characteristics
characteristics.
ble.
The motors are class F with ball bearings and have
Environment
Centrifugal fan types CMP are designed for maximum airflow temperatures up to 120 C. Optionally designs for 250 C are also available.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CMP
583
Products
Acoustic Characteristics
Guards
Model
63
4k
8k
CMP-512-2T 37
47
58
65
69
66
64
57
CMP-514-2T 40
50
61
68
72
69
67
60
CMP-616-2T 44
54
65
72
76
73
71
64
CMP-718-2T 45
55
66
73
77
74
72
65
CMP-820-2T 48
58
69
76
80
77
75
68
Accessories
Duct bosses Inlets and Outlets
Adaptor duct bosses for both inlets and outlets
are available for fitting the fans on to ducts.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
584
Products
Dimensions
d2
C
C1
d2
d1
d1
D1
45
D1
C2
90
d
B1
O k2
O k2
J1
J2
LJ J2
K
CMP
Size
B1
B2
512
182
207
118
514-2
225
254
150
616-2
258
297 173.5
718-2T
820-2T
1.
303.5 348
322
LJ
J1
377
C1
250.5 211.5
I
C
H1
B2
C2
D11 d d1 d2
39
112
140
132
H1
J1
J2
M.4
81
69
106 118
105 75
K k2
86
5.5
91
122 147
64
6.5
85
93
L O
252
207
45
140
169 151.5
M.4
100
295
239
56
160
204
180
M.6
110
201
358
294
64
180
238
210
M.6
129.5
122
169 192
223
335.5
267
68.5
200
247
230
M.6
137.5
137
Weights
Model
Approx.
weight [kg]
CMP-512-2T
4.0
CMP-514-2T
5.0
CMP-616-2T
8.0
CMP-718-2T
12.5
CMP-820-2T
15.0
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Medium-Pressure Centrifugal Fans CMP
585
Products
Performance Curves
1400
1200
820
Total pressure [Pa]
1000
718
800
600
616
514
400
512
200
0
0
800
400
0.1
1200
0.2
0.3
Air flow
1600
0.4
[m3/h]
2000
0.6 [m3/s]
0.5
Position Designations
LG 0
LG 45
LG 90
LG 180
LG 270
LG 315
RD 0
RD 45
RD 90
RD 180
RD 270
RD 315
The positions are according to EUROVENT and seen from the motor side.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
586
Products
Sound Conditions
in question.
The sound pressure level depends in other words
surroundings.
siderably.
escapes through the fan housing, can be dampened by enclosing the fan. This is, for example,
compared.
power levels.
quency
given
by
the
equation
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Sound Conditions
587
Products
63
125
250
500
1k
2k
4k
90-180 Hz
12
17
22
27
8k
32
180-360 Hz
11
12
17
22
27
360-710 Hz
13
11
12
17
22
710-1400 Hz
15
13
10
12
18
63
125
250
500
1k
2k
4k
8k
74
78
81
78
73
68
63
58
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
588
Sound Conditions
Products
Frequency Conversion
vane control, the fan efficiency remain close to unchanged in the entire downwards controlled area
windings)
needed.
Pole Changing
80
%
70
60
50%
40%
30%
unchanged.
60
20%
80
90
50o
10%
40o
30o
70
20o
Aperture
10o
control.
requirements for air volume is changing constantly. It is also used in systems where the air
volume must remain constant regardless of outside pressure conditions.
The inlet vane control can be operated by a servomotor controlled by a pressurestat or a flow sensor.
At reduced flow control the fan efficiency drops
as indicated on the performance chart. In case of
large variations in air volume it is therefore recommended to combine the inlet vane control with
pole changing.
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
Control of Air Volume
589
Products
Owing to continued product development Novenco reserves the right to introduce alterations without prior notice
590