Académique Documents
Professionnel Documents
Culture Documents
2 year
warranty
Manufactured in the UK
Measuring a capacitor's ESR (equivalent series resistance) is a great indicator of capacitor condition. The Atlas ESR offers instant results. Just connect the probes and
press test - no need to worry about polarity! You can even use it in circuit, saving you
the trouble of removing capacitors. When testing capacitors out of circuit, the unit will
also display the capacitance. If a capacitor is charged, the unit will automatically
carry out a controlled discharge procedure before measuring the capacitance and
ESR. Audible feedback during testing provides indication of high or low readings. Includes GP23AE 12V battery (S 5020). Dimensions: 100 x 70 x 20mm.
Features Dynamic range of 0.00 to 40.0 Fine ESR resolution down to 0.01
Supports 1F to 22,000F Ideal for low DC resistance checking (such as PCB shorts)
Industry standard 100kHz test frequency Long life battery included
2 year Australian
warranty Made
Features Suits 70V and 100V Calculates load in ohms and watts 9V battery powered
with recharging port Compact handheld case Includes test leads
RRP
Price Each
RRP
Price Each
Q 2001
Q 2002
Q 1055
2+
4+
34.95
6.50
30.00
5.85
27.50
209.00
Q 2105
Q 1054 Carry case to suit
6.35
Impedance Meter
5
2 year
warranty
2 year
warranty
Manufactured in the UK
Could save you hours in looking up component specifications! A must have for service technicians, R&D labs and electronic repair shops. Identifies semiconductors in
seconds, allowing you to test their condition or find equivalent replacements. It automatically identifies and analyses a range of components (see box below). Simply connect the test leads (in any order!) to the component and it will analyse the device and
display the results on the scrollable multi-page display. Includes battery.
Identifies Germanium & silicon transistors JFETs Low power thyristors & triacs
Darlingtons MOSFETs LEDs Diodes & diode networks
RRP
Price Each
110.00
Q 2100
Q 1054 Carry case to suit
6.35
Measuring a transformer with a standard multimeter will not give accurate results
because it is measuring dc resistance, not ac. This invaluable unit has a large
30mm high, backlit display and is fantastic for checking transformers and speaker
impedances. Applies a 30 second test tone signal upon activation of the test
button. May also be locked in test mode for continuous tone. Supplied in a safety
yellow plastic case to protect the unit when not in use and includes a soft carry case.
Features 20M, 200, 2000 ranges Backlit LCD readout Push to test activation
Auto power off Tough plastic casing, plus soft carry case High quality silicon test
probes Batteries included
SPECIFICATIONS
Measurement frequency:
1kHz
Range:
20, 200, 2k
Display:
Accuracy:
Size:
Price Each
Q 2005
2+
4+
Australian
Made
Price Each
Q 2010
RRP
2+
4+
19.95
17.95
15.95
This pocket ac non contact tester with torch is a great addition to any toolbox. It
detects live ac voltages from 100V to 600V (50-60Hz). Easy operation allows
detection of live wires without contact. Whenever ac is detected at a power point,
sheathed or bare ended cable, the tester will light up red. This provides an instant
indication of which cables or power outlets have lethal high ac voltages present. An
essential test tool for electrical tradespeople, or anyone operating with ac power.
Includes 2 x AAA batteries.
Features ac Voltage detection without contact Continuity check LED light CAT III
1000V rated Dimensions 176 x 26mm
Price Each
Q 3002
RRP
2+
5+
18.95
17.70
15.70