Académique Documents
Professionnel Documents
Culture Documents
BHUBANESWAR
Course: Master of CAD/CAM
Subject: CATIA
Full marks:
Time:
35)What is the difference between remove section & revolved section? Explain with
one example
36)Write six no of Geometrical constraints & two no of dimensional constraints used
in CATIA assembly?
37)Write methods two check the degree of freedom in Assembly?
38)What is the meaning of P.P.R in CATIA Mfg?
39)Write two different procedures to create stock in CATIA Mfg?
40)Write the name of five no of 3D toolpath M/Cing operations?
41)What is the use of process sheet to manufacturing a component explain within
two lines?
42)What is A,B,C axis in Milling?
43)Why a M/C is called M/C ing center?
44)Write three type of tool magazine we are using in CNC?
45)Write the cutting speed value of CI,MS& Al, if cutting tool material, is HSS?
46)Why we are Homing a CNC M/C?
47)Differentiate between production and productivity?
48)Explain briefly about lead time?
49)Which cable is used for transforming programme from computers to M/C? Name
three DNC media to transfer data?
50)For changing orientation of a sketch _________ option is used.
51)For island type of pocket ________ style of cutting is used.
52)What is the difference between project & combined curve?
53)Write the procedure to call move toolbar in kinematics
54)What is the meaning of V5, P3, & R18?
55)What is the difference between sketch project & wire frame project?
56)Write the application multi section solid, guide curve, spine and coupling.
57)Write two limitation of fill surface in CATIA.
58)Write two limitations of stiffener in CATIA solid.
59)Relation can be maintained between to coaxes gear by _________ joint.
60)In kinematics two parts can be fixed by using _________ joint.
61)Relation between two prismatic joint can be maintained by _________
joint.
1. Why we are constraining a sketch?
2. Using which option unequal cross section can be blend to create a solid
body.
3. Name three procedures to extrude a geometry out of number of geometry
inside a common sketch.
4. How to hide & show geometry, specification tree & compass?