Vous êtes sur la page 1sur 68

Report No D4061-14

FURNIVAL HOUSE, HIGHGATE, NORTH LONDON

FACTUAL REPORT ON GROUND INVESTIGATION

Carried out for:


City Basements Limited

September 2014

Glossop House, Hogwood Lane,


Wokingham, Berkshire, RG40 4QW, UK
Tel: +44 (0) 118 932 8888 Fax: +44 (0) 118 932 8383
email: geo.wokingham@esg.co.uk

FURNIVAL HOUSE, HIGHGATE, NORTH LONDON

FACTUAL REPORT ON GROUND INVESTIGATION

Report No: D4061-14


Date:

September 2014

Employer:

Engineer:

City Basements Limited


Harrow
Middlesex
HA3 5QY

As Employer

Issue No
1
Rev.1

Date
September 2014
September 2014

Details
Final Report
Final Report (revised borehole logs)

The title to this report is vested in the Employer named but title to copyright is retained. The Contracts (Rights of Third
Parties) Act 1999 does not apply to the contract with the Employer and the provisions of the said Act are hereby excluded.

www.esg.co.uk

Environmental Scientifics Group Limited


Reg office: ESG House, Bretby Business Park, Ashby Road, Burton upon Trent, DE15 0YZ
Incorporated in England: 02880501

CONTENTS
Page
1

INTRODUCTION

THE SITE AND GEOLOGY


2.1
The Site
2.2
Published Geology

FIELDWORK
3.1
General
3.2
Exploratory Holes
3.3
Instrumentation and Monitoring
3.4
In Situ Testing

LABORATORY TESTING

REFERENCES

ENCLOSURES
A
EXPLORATORY HOLE RECORDS
B
INSTRUMENTATION AND MONITORING
C
IN SITU TESTING
D
GEOTECHNICAL LABORATORY TEST RESULTS
E
DRAWINGS

September 2014
Issue 1 Rev.1

Report No D4061-14
Page 1 of 5

INTRODUCTION

In June 2014 Environmental Scientifics Group (ESG) was commissioned by City Basements
Limited (CB), to carry out a ground investigation at Furnival House in Highgate, North London. The
investigation was required to obtain geotechnical information so that the findings could be
compared and contrasted to those of a previous investigation carried out by others.

The scope of the investigation, which was provided by CB, comprised cable percussive boring and
laboratory testing. The scope was subsequently modified in an email dated 21 July 2014 to include
rising head permeability testing in the post-fieldwork period.

The investigation was carried out in accordance with the contract specification, Eurocode 7 and
relevant related standards identified below (see also References). The fieldwork was carried out
between 8 and 11 July 2014.

This report presents the factual records of the fieldwork and laboratory testing.

THE SITE AND GEOLOGY

2.1

The Site

Furnival House is situated in Highgate, North London; see Site Location Plan in Enclosure E. The
site is at National Grid reference TQ287 874.

The site is centred on Furnival House, a Grade II listed building surrounded by woodland to the
north and with a macadam car park immediately to the south. Cholmeley Park road runs along the
south and east off which access is gained to the south and west of the site via a driveway.

At the time of the investigation the basement of Furnival House was being excavated.

2.2

Published Geology

The published geological map covering the site, BGS Sheet 256, North London (2006), shows the
Bagshot Formation overlying the Claygate Member of the London Clay Formation.

September 2014
Issue 1 Rev.1

Report No D4061-14
Page 2 of 5

FIELDWORK

3.1

General

The fieldwork was carried out in general accordance with BS 5930+A2 (2010), BS EN 1997-2
(2007) and BS EN ISO 22475-1 (2006).

The exploratory hole locations were selected by CB. The locations were set out from local
features. The exploratory hole locations are shown on the Site Plan in Enclosure E.

3.2

Exploratory Holes

The exploratory holes are listed in the following table.

SUMMARY OF EXPLORATORY HOLES


TYPE
Cable Percussion Boring

QUANTITY

MAXIMUM
DEPTH (m)

23.00

REMARKS
Designated TBH1 & TBH2

The exploratory hole records are presented in Enclosure A and should be read in conjunction with
the Key which is included in that enclosure. The records provide descriptions of the materials
encountered in accordance with BS EN ISO 14688-1 (2002) for soils, as amplified by BS 5930+A2
(2010). The records also give details of the samples taken together with observations made during
boring.

On completion of the fieldwork geotechnical samples were transported to the Wokingham office of
ESG for temporary retention. Samples that were required for testing were transferred to the inhouse laboratory in Daventry.

3.3

Instrumentation and Monitoring

The instruments installed in the exploratory holes are shown on the logs and detailed in
Enclosure B. Records of groundwater monitoring carried out by ESG after the fieldwork period are
presented in Enclosure B.

September 2014
Issue 1 Rev.1

Report No D4061-14
Page 3 of 5

3.4

In Situ Testing

In situ testing was carried out in accordance with the relevant standards as tabulated below. The
testing is summarised in the following table and the results are presented in Enclosure C.

SUMMARY OF IN SITU TESTING


TYPE

QUANTITY

Rising Head Permeability

REMARKS
BS 5930+A2 (2010)

LABORATORY TESTING

The testing was scheduled by CB and was carried out in accordance with BS 1377 (1990). The
testing is summarised below and the results are presented in Enclosure D.

SUMMARY OF GEOTECHNICAL LABORATORY TESTING


TYPE

REMARKS

Moisture Content Determination

26no.

Atterberg Limit Determination

26no.

Particle Size Distribution Analysis

7no.

Unconsolidated Undrained Triaxial Compression Testing

4no.

Prepared By

G Simmons BSc MSc

Reviewed By

D Beskeen BSc

Approved for Issue By

D Beskeen BSc

September 2014
Issue 1 Rev.1

Report No D4061-14
Page 4 of 5

REFERENCES

BGS England and Wales Sheet 256, North London (2006) 1:50 000 geological map (drift and
solid). British Geological Survey.
BS 1377 : 1990 : Methods of test for soils for civil engineering purposes. British Standards
Institution.
BS 5930+A2 : 2010 : Code of practice for site investigations (Amendment 2). British Standards
Institution.
BS EN 1997-2 : 2007 : Eurocode 7 - Geotechnical design - Part 2 Ground investigation and
testing. British Standards Institution.
BS EN ISO 14688-1 : 2002 : Geotechnical investigation and testing - Identification and
classification of soil - Part 1 Identification and description. British Standards Institution.
BS EN ISO 22475-1 : 2006 : Geotechnical investigation and testing Sampling methods and
groundwater measurements - Part 1 Technical principles for execution. British Standards
Institution.

September 2014
Issue 1 Rev.1

Report No D4061-14
Page 5 of 5

ENCLOSURE A
EXPLORATORY HOLE RECORDS

Key to Exploratory Hole Records

Key

Borehole Logs

TBH1 & TBH2

Cable Percussion Daily Record

TBH1 & TBH2

September 2014
Issue 1 Rev.1

Report No D4061-14
Enclosure A

Key to Exploratory Hole Records


SAMPLES
Undisturbed
U
UT
TW
P
L
CBR
BLK
CS
AMAL

Driven tube sample


Driven thin wall tube sample
nominally 100 mm diameter and full recovery unless otherwise stated
Pushed thin wall tube sample
Pushed piston sample
Liner sample (from Windowless or similar sampler), full recovery unless otherwise stated
CBR mould sample
Block sample
Core sample (from rotary core) taken for laboratory testing
Amalgamated sample

Disturbed
D
B

Small sample
Bulk sample

Other
W
G

Water sample
Gas sample

ES
EW

Environmental chemistry samples (in more than one container where appropriate)
Soil sample
Water sample

Comments

Sample reference numbers are assigned to every sample taken. A sample reference of 'NR' indicates that attempt was
made to take a tube sample, however, there was no recovery.
Monitoring samples taken after completion of hole construction are not shown on the exploratory hole logs.

TESTS
SPT S or SPT C

Standard Penetration Test, open shoe (S) or solid cone (C)


The Standard Penetration Test is defined in BS EN ISO 22476-3 (2005). The incremental blow counts are given in the
Field Records column; each increment is 75 mm unless stated otherwise and any penetration under self weight in mm
(SW) is noted. Where the full 300 mm test drive is achieved the total number of blows for the test drive is presented as
N = ** in the Test column. Where the test drive blows reach 50 the total blow count beyond the seating drive is given
(without the N = prefix).

IV
HV
PP
KFH, KRH, KPI

in situ Vane shear strength, peak (p) and remoulded (r)


Hand vane shear strength, peak (p) and remoulded (r)
Pocket penetrometer test, converted to shear strength
Permeability tests (KFH = falling head, KRH = rising head; KPI = packer inflow); results provided in Field Records
column (one value per stage for packer tests)

DRILLING RECORDS
The mechanical indices (TCR/SCR/RQD & If) are defined in BS 5930+A2 (2010)
TCR
SCR
RQD
If

Total Core Recovery, %


Solid Core Recovery, %
Rock Quality Designation, %
Fracture spacing, mm. Minimum, typical and maximum spacings are presented. The term
non-intact (NI) is used where the core is fragmented.

Flush returns, estimated percentage with colour where relevant, are given in the Records column
CRF
AZCL
NR

Core recovered (length in m) in the following run


Assessed zone of core loss
Not recovered

GROUNDWATER
Groundwater strike
Groundwater level after standing period

Notes:
See report text for full references of standards

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Key
Sheet 1 of 2

Key to Exploratory Hole Records


INSTALLATION
Standpipe/
piezometer

Details of standpipe/piezometer installations are given on the Record. Legend column shows installed instrument
depths including slotted pipe section or tip depth, response zone filter material type and layers of backfill.

SP
SPIE
PPIE
EPIE

The type of instrument installed is indicated by a code in the Legend column at the depth of the response zone:
Standpipe
Standpipe piezometer
Pneumatic piezometer
Electronic piezometer

Inclinometer or
Slip Indicator

The installation of vertical profiling instruments is indicated on the Record. The base of tubing is shown in the Legend
column.

ICE
ICM
SLIP

The type of instrument installed is indicated by a code in the Legend column at the base of the tubing:
Biaxial inclinometer
Inclinometer tubing for use with probe
Slip indicator

Settlement
Points or
Pressure Cells

The installation of single point instruments is indicated on the Record. The location of the measuring device is shown in
the Legend column.

ESET
ETM
EPCE
PPCE

The type of instrument installed is indicated by a code in the Legend column:


Electronic settlement cell/gauge
Magnetic extensometer settlement point
Electronic embedment pressure cell
Electronic push in pressure cell

INSTALLATION
LEGENDS

A legend describing the installation is shown in the rightmost column. Legends additional to BS5930 are used to
describe the backfill materials as indicated below.
Arisings

NOTES
1

Concrete

Grout

Bentonite

Sand

Gravel

Macadam

Soils and rocks are described in accordance with BS EN ISO 14688-1 (2002) and 14689-1 (2003) respectively as
amplified by BS 5930+A2 (2010).

For fine soils, consistency determined during description is reported for those strata where undisturbed samples are
available. Where the logger considers that the sample may not be representative of the condition in situ, for whatever
reason, the reported consistency is given in brackets. The reliability of the sample is indicated by Probably or Possibly
as appropriate. Hence (Probably firm) indicates the logger is reasonably confident of the assessment, but (Possibly
firm) means less certainty. Where the samples available are too disturbed to allow a reasonable assessment of the in
situ condition, no consistency is given.

Evidence of the occurrence of very coarse particles (cobbles and boulders) is presented on the logs, however, because
of their size in relation to the exploratory hole these records may not be fully representative of their size and frequency
in the ground mass.

The declination of bedding and joints is given with respect to the normal to the core axis. Thus in a vertical borehole this
will be the dip.

The assessment of SCR, RQD and Fracture Spacing excludes artificial fractures

Strata legends are in accordance with BS 5930+A2 (2010).

Water level observations of discernible entries during the advancing of the exploratory hole are given at the foot of the
log and in the Legend column. The term "none observed" is used where no discrete entries are identified although this
does not necessarily indicate that the hole has not been advanced below groundwater level. Under certain conditions
groundwater cannot be observed, for instance, drilling with water flush or overwater, or boring at a rate much faster
than water can make its way into the borehole (ref BS5930+A2:2010, Clause 47.2.7). In addition, where appropriate,
water levels in the hole at the time of recovering individual samples or carrying out in situ tests and at shift changes are
given in the Records column.

The borehole logs present the results of Standard Penetration Tests recorded in the field without correction or
interpretation. However, in certain ground conditions (eg high hydraulic head or where very coarse particles are
present) some judgement may be necessary in considering whether the results are representative of in situ mass
conditions.
Updated March 2012

Notes:
See report text for full references of standards

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Key
Sheet 2 of 2

Borehole Log
Drilled
Logged

Start
08/07/2014
End
10/07/2014

GW
JS/CP

Checked DB

Equipment, Methods and Remarks


Pilcon 150
Hand dug inspection pit from GL to 1.20m. Cable percussive boring from
1.20m to 23.00m depth.

Type & No

Diameter
150mm

Casing Depth
17.50m

Ground Level
Coordinates
National Grid

Chainage

Samples and Tests


Depth

Depth from
to
0.00m
23.00m

Strata
Records

Date
Casing

Time
Water

08/07/2014

0800
dry

Description

Depth,Level
(Thickness)

Legend

Backfill/
Instruments

(MADE GROUND)
Brown silty sandy CLAY fill with brick.
(Drillers description)
(1.30)

Brown sandy CLAY with rare gravel.


(Drillers description)
Soft to firm orangish brown silty sandy
CLAY.
(Drillers description)
Stiff brown weathered CLAY.
(Drillers description)

1.30
(0.40)
1.70
(0.40)
2.10
2.30

Yellowish brown silty fine SAND.


(Drillers description)

(2.70)

Firm to stiff brown laminated silty


CLAY.
(Drillers description)

5.00

(4.60)
1

8.30-8.50

B1
1

Soft grey sandy silty CLAY.

Depth

Records

Type & No

Date
Casing

Time
Water

Groundwater Entries
No.

Struck
(m)

8.50

Post strike behaviour

Rose to 7.60 m after 20 minutes.

Notes: For explanation of symbols and


abbreviations see key sheet. All depths and reduced
levels in metres. Stratum thickness given in brackets
in depth column.
Scale 1:50

Depth sealed
(m)

(c) ESG www.esg.co.uk


426.4812/09/2014 06:11:14

9.60

Stratum continues to 11.00 m


Depth Related Remarks *

Chiselling

From

Depths (m)

to (m)

Time

Tools used

11.00

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Borehole

TBH1
Sheet 1 of 3

Borehole Log
Drilled
Logged

Equipment, Methods and Remarks

Start
08/07/2014
End
10/07/2014

GW
JS/CP

Checked DB

Diameter
150mm

Casing Depth
17.50m

Ground Level
Coordinates
National Grid

Chainage

Samples and Tests


Depth

Depth from
to
0.00m
23.00m

Pilcon 150
Hand dug inspection pit from GL to 1.20m. Cable percussive boring from
1.20m to 23.00m depth.

Strata

Type & No

Records

Date
Casing

Time
Water

Depth,Level
(Thickness)

Description
(Continued from Sheet 1)

Legend

Backfill/
Instruments

(Drillers description)
B2

10.20-10.60

(1.40)

11.00-11.45

UT 3

7 blows

11.00

dry

11.45
11.50-11.95

D4
UT 5

20 blows

11.00

dry

12.00-12.45

UT 7

25 blows

11.00

dry

12.45
12.50-12.95

D8
UT 9

12.95
13.00-13.45

08/07/2014
11.00

1800
dry

18 blows

11.00
09/07/2014
11.00

damp
0800
damp

D 10
UT 11

23 blows

11.00

damp

13.45
13.50-13.95

D 12
UT 13

17 blows

11.00

damp

13.95
14.00-17.00
14.00-14.95

D 14
KRH
UT 15

k=1.8E-7 m/s
7 blows

11.00

dry

14.50-14.95

UT 17

13 blows

11.00

dry

14.95
14.95
15.00-15.45

D 16
D 18
UT 19

12 blows

14.50

damp

15.45
15.50-15.95

D 20
UT 21

17 blows

14.50

damp

09/07/2014
14.50

1800
damp

10/07/2014
14.50

0800
9.70

16.00

14.40

D 22

15.95

UT 23

16.50-16.95

16.95
17.00-17.45

D 24
UT 25

17.45
17.50-17.95

D 26
UT 27

21 blows

25 blows

26 blows

16.00

17.50

15.00

17.00

17.95
18.00-18.45

D 28
UT 29

22 blows

17.50

damp

18.45
18.50-18.95

D 30
UT 31

17 blows

17.50

damp

18.95
19.00-19.45

D 32
UT 33

15 blows

17.50

dry

19.45
19.50-19.95

D 34
UT 35

13 blows

17.50

dry

Records

Date
Casing

Type & No

Time
Water

Groundwater Entries
No.

Struck
(m)

Post strike behaviour

15.00

Rose to 14.60 m after 20 minutes.

Notes: For explanation of symbols and


abbreviations see key sheet. All depths and reduced
levels in metres. Stratum thickness given in brackets
in depth column.
Scale 1:50

Stiff greyish brown to light greyish


brown thinly interlaminated silty CLAY,
SILT and fine SAND. Sand is of light
grey quartz and locally dark green
glauconite.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

Firm to stiff brownish grey thinly


interlaminated silty CLAY, SILT and fine
SAND with occasional pockets of
yellowish orange and light grey fine
sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

(c) ESG www.esg.co.uk


426.4812/09/2014 06:11:16

Depth sealed
(m)

11.00-11.45 m
Medium gravel
sized nodule of
pyrite.
11.22 m Sand
parting dipping
30 degrees
(possibly cross
bedding)
11.22-11.45 m
High strength
measured in
triaxial test
11.45 m Sand
laminae
becoming yellow
12.60 m Fissure
dipping 20
degrees, infilled
with brownish
orange sand
12.65 m Fissure
dipping 20
degrees, infilled
with brownish
orange sand
12.70-12.80 m
Thin bed of dark
greyish green
fine sand of
glauconite
13.50-14.45 m
High strength
measured in
triaxial test.
Occasional
pockets of
orangish brown
sand
15.00-15.08 m
Recovered as
soft sandy silt.
Sand is fine

Firm to stiff brownish grey thinly


interlaminated clayey SILT, silty CLAY
and light grey to dark green silty
glauconitic fine SAND. (CLAYGATE
MEMBER, LONDON CLAY FORMATION)

Stiff greyish brown to light greyish


brown silty CLAY with closely spaced
bioturbated thin laminae and pockets of
silt and fine sand. Sand is of light
grey quartz and rare glauconite.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)
Very stiff grey silty CLAY with
occasional pockets/partings (<30mm x
30mm x 8mm) of light grey occasionally
speckled black fine sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

D 36

19.95
Depth

Stiff to very stiff brownish grey silty


CLAY with closely spaced thin laminae of
silt and silty fine sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

11.00

(1.50)

12.50

(2.00)

14.50
(0.50)
2

15.00

(1.57)

16.50-16.57 m
Recovered as
dark grey very
silty glauconitic
fine sand
17.00-18.50 m
Frequent
pockets of light
grey,
occasionally
speckled black,
fine sand.
17.10-17.14 m
(Stiff) fissured
slightly
micaceous silty
CLAY. Fissures
are
subhorizontal
(5-10 deg),
planar, smooth,
extremely
closely spaced.
17.31-17.40 m
Grey mottled
yellowish brown
17.50-17.61 m
Mottled yellowish
brown and grey
17.72-17.76 m
Occasional light
pinkish brown
bivalve fossils

16.57
(0.43)
17.00

SP

Stratum continues to 23.00 m


Depth Related Remarks *

Chiselling

From

Depths (m)

14.00
14.50

to (m)
17.00
16.00

Time

Tools used

Driller notes installation required excessive quantity of granular material.


Driller notes collapse of materials into borehole when uncased.

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Borehole

TBH1
Sheet 2 of 3

Borehole Log
Drilled
Logged

Start
08/07/2014
End
10/07/2014

GW
JS/CP

Checked DB

Equipment, Methods and Remarks

Records

Date
Casing

20.00-20.45

UT 37

20 blows

17.50

dry

20.45
20.50-20.95

D 38
UT 39

20 blows

17.50

dry

20.95
21.00-21.45

D 40
UT 41

23 blows

17.50

dry

21.45
21.50-21.95

D 42
UT 43

36 blows

17.50

dry

21.95
22.00-22.45

D 44
UT 45

50 blows

17.50

dry

22.45
22.50-22.95

D 46
UT 47

50 blows

17.50

dry

10/07/2014
17.50

Time
Water

Very stiff grey silty CLAY with


occasional pockets/partings (<30mm x
30mm x 8mm) of light grey occasionally
speckled black fine sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

1800
dry

Records

Date
Casing

Struck
(m)

Post strike behaviour

Notes: For explanation of symbols and


abbreviations see key sheet. All depths and reduced
levels in metres. Stratum thickness given in brackets
in depth column.
Scale 1:50

(c) ESG www.esg.co.uk


426.4812/09/2014 06:11:21

:: 17.72m - <4mm
x 3mm x
2mm
20.15-20.20 m
Grey mottled
orangish brown
20.25-20.27 m
Fissured;
Fissures are
randomly
orientated,
undulating,
striated, locally
polished,
extremely
closely spaced
20.28-20.32 m
Thinly
interlaminated
grey silty clay
and light grey fine
sand.
21.00-21.35 m
Rare pockets
<20mm x 20mm
x 6mm of light
grey,
occasionally
speckled black,
fine sand
21.19 m Light
pinkish brown
gastropod fossil
20mm x 15mm x
15mm
21.50-22.30 m
Rare
pockets/partings
<30mm x 30mm x
2mm of light grey,
locally dark grey
fine sand with
rare light pinkish
brown gastropod
fossils <3mm x
2mm x 2mm
22.00-22.08 m
Grey, rarely
mottled orangish
brown
22.50-22.85 m
Grey, rarely
mottled orangish
brown
22.88-22.95 m
Frequent
pockets <70mm
60mm x 10mm of
(firm to stiff)
fissured clay.
Fissures are
randomly
orientated,
planar, smooth
and striated,
locally polished,
extremely
closely spaced.

Legend

Backfill/
Instruments

(6.00)

23.00

Time
Water

Groundwater Entries
No.

Ground Level
Coordinates
National Grid

Depth,Level
(Thickness)

Description
(Continued from Sheet 2)

EXPLORATORY HOLE ENDS AT 23.00 m

Type & No

Casing Depth
17.50m

Strata

Type & No

Depth

Diameter
150mm

Chainage

Samples and Tests


Depth

Depth from
to
0.00m
23.00m

Pilcon 150
Hand dug inspection pit from GL to 1.20m. Cable percussive boring from
1.20m to 23.00m depth.

Depth sealed
(m)

Depth Related Remarks *

Chiselling

From

Depths (m)

to (m)

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Time

Tools used

Borehole

TBH1
Sheet 3 of 3

Borehole Log
Drilled
Logged

Start
11/07/2014
End
14/07/2014

GW
JS/CP

Checked DB

Equipment, Methods and Remarks


Pilcon 150
Hand dug inspection pit from GL to 1.20m. Cable percussive boring from
1.20m to 21.50m depth.

Type & No

Diameter
200mm
150mm

Casing Depth
5.00m
16.50m

Ground Level
Coordinates
National Grid

Chainage

Samples and Tests


Depth

Depth from
to
0.00m
5.00m
5.00m
21.50m

Strata
Records

Date
Casing
11/07/2014

Time
Water
0800
dry

Description

(MADE GROUND)
CONCRETE
(Drillers description)

Depth,Level
(Thickness)

Legend

Backfill/
Instruments

0.10
0.30

(MADE GROUND)
Rubble/fill
(Drillers description)
(MADE GROUND)
Yellowish brown silty SAND with brick.
(Drillers description)

D1

2.30

(MADE GROUND)
Orangish brown SAND AND GRAVEL with
brick fragments.
(Drillers description)

D2

3.10

Firm orangish brown, yellowish brown and


grey CLAY with frequent silt and fine
sand laminae. Occasional thin laminae of
cemented siltstone. Occasional roots
and rootlets.
(BAGSHOT FORMATION)

(2.00)

2.30

(0.80)

3.10
(0.60)
3.70

Brown silty SAND.


(Drillers description)
(BAGSHOT FORMATION)
(2.00)
11/07/2014
5.00

1800
dry

14/07/2014
5.00

0800
dry

B3

5.70-6.00

Soft to firm light grey and greyish


brown mottled dark orange and reddish
brown CLAY locally grading to fine sandy
silty clay.
(BAGSHOT FORMATION)

5.70

(2.80)

B4

8.50-9.00

Brown and dark grey sandy silty CLAY.


Recovered soft.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

8.50

(1.80)

Depth

Records

Type & No

Date
Casing

Time
Water

Groundwater Entries
No.

Struck
(m)

Post strike behaviour

Notes: For explanation of symbols and


abbreviations see key sheet. All depths and reduced
levels in metres. Stratum thickness given in brackets
in depth column.
Scale 1:50

(c) ESG www.esg.co.uk


426.4812/09/2014 06:11:30

Depth sealed
(m)

Stratum continues to 10.30 m


Depth Related Remarks *

Chiselling

From

Depths (m)

to (m)

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Time

Tools used

Borehole

TBH2
Sheet 1 of 3

Borehole Log
Drilled
Logged

Start
11/07/2014
End
14/07/2014

GW
JS/CP

Checked DB

Equipment, Methods and Remarks

Type & No

Date
Casing

Time
Water

11.00-11.45

UT 6

13 blows

10.50

dry

Firm grey slightly micaceous silty CLAY


with pockets and partings of dark grey
fine sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

11.45
11.50-11.95

D7
UT 8

16 blows

10.50

dry

11.95
12.00-12.45

D9
UT 10

16 blows

10.50

dry

12.45
12.50-12.95

D 11
UT 12

9 blows

10.50

dry

12.95
13.00-13.45

D 13
UT 14

13 blows

10.50

dry

13.45
13.50-13.95

D 15
UT 16

9 blows

10.50

dry

13.95
14.00-19.00
14.00-14.45

D 17
KRH
UT 18

k=1.1E-7 m/s
8 blows

10.50

damp

14.45
14.50-14.95

D 19
UT 20

9 blows

13.70

damp

14.95
15.00-15.45

D 21
UT 22

0 blows

14.50

damp

15.45
15.50-15.95

D 23
UT 24

13 blows

15.00

damp

15.95
16.00-16.45

D 25
UT 26

16.50

damp

16.45
16.50-16.95

D 27
UT 28

11 blows

16.50

damp

16.95
17.00-17.45

D 29
UT 30

11 blows

16.50

damp

17.45
17.50-17.95

D 31
UT 32

9 blows

16.50

damp

17.95
18.00-18.45

D 33
UT 34

14 blows

16.50

damp

18.45
18.50-18.95

D 35
UT 36

11 blows

16.50

damp

18.95
19.00-19.45

D 37
UT 38

17 blows

16.50

damp

D 39
UT 40

19.95
Depth

13 blows

16.50

Records

Date
Casing

Stiff thinly interlaminated greyish


brown to pale greyish brown silty CLAY,
SILT and pale grey to dark green
glauconitic SAND.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

Stiff brownish grey to grey thinly


interlaminated silty CLAY, SILT and fine
SAND. Rare pockets of silt and fine to
medium grey to light grey, locally dark
green and glauconitic, silty sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

Very stiff grey silty CLAY with frequent


pockets (<30mm x 30mm x 10mm) of light
grey, occasionally speckled black fine
sand. Occasional light pinkish brown
bivalve and gastropod shells (<10mm x
8mm x 2mm).
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

damp

Time
Water

Groundwater Entries
No.

Struck
(m)

Post strike behaviour

14.00

Rose to 13.20 m after 20 minutes.

Notes: For explanation of symbols and


abbreviations see key sheet. All depths and reduced
levels in metres. Stratum thickness given in brackets
in depth column.
Scale 1:50

(c) ESG www.esg.co.uk


426.4812/09/2014 06:11:32

Depth sealed
(m)

Legend

Backfill/
Instruments

10.30
(0.70)

11.00-11.45 m
High strength
measured in
triaxial test

Stiff greyish brown silty CLAY with


closely spaced thin laminae and rare
pockets (up to 8mm x 30mm) of silt and
fine to medium sand.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

D 41
Type & No

Ground Level
Coordinates
National Grid

Depth,Level
(Thickness)

Description
(Continued from Sheet 1)

Brown and dark grey sandy silty CLAY.


Recovered soft.
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

19.45
19.50-19.95

Casing Depth
5.00m
16.50m

Strata
Records

B5

10.30-10.70

Diameter
200mm
150mm

Chainage

Samples and Tests


Depth

Depth from
to
5.00m
0.00m
5.00m
21.50m

Pilcon 150
Hand dug inspection pit from GL to 1.20m. Cable percussive boring from
1.20m to 21.50m depth.

11.00

(1.04)

12.04
12.25-12.30 m
Very thin bed of
pale grey to dark
green very silty
glauconitic fine to
medium sand
12.45-12.70 m
Soft to firm
brownish grey
silty CLAY with
closely spaced
laminae and
pockets of silt
and pale grey to
dark green fine to
medium sand.
13.05-13.12 m
Thin bed of
greyish green
silty glauconitic
fine sand
13.12-13.45 m
Occasional
pockets of green
or orangish
yellow fine sand
13.70-13.95 m
Cross bedded,
dipping up to 40
degrees
14.00-14.45 m
Firm to stiff
14.50-14.60 m
Clayey silt, with
frequent pockets
of coarse sand
14.50-14.95 m
High strength
measured in
triaxial test
14.89-14.95 m
High strength
measured in
triaxial test
15.50-15.95 m
Firm to stiff
16.00-16.20 m
Thin bed of dark
green slightly
clayey
glauconitic fine
sand. Bedding
possibly
disturbed by
drilling
16.70 m Thin
lamination (5 mm)
of clay, dipping
up to 30
degrees
(possibly parallel
to cross
bedding)
16.80-16.87 m
Thin lamination (5
mm) of clay,
dipping up to 30
degrees
(possibly parallel
to cross
bedding)
19.27-19.40 m
Abundant
pockets <40mm

(1.66)
1

13.70
1

(3.30)

17.00

SP

(4.50)

Stratum continues to 21.50 m


Depth Related Remarks *

Chiselling

From

Depths (m)

to (m)

Time

Tools used

11.00

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Borehole

TBH2
Sheet 2 of 3

Borehole Log
Drilled
Logged

Start
11/07/2014
End
14/07/2014

GW
JS/CP

Checked DB

Equipment, Methods and Remarks

Records

Date
Casing

20.00-20.45

UT 42

17 blows

20.45
20.50-20.95

D 43
UT 44

20.95
21.00-21.45

D 45
UT 46

Time
Water

Description
(Continued from Sheet 2)

16.50

damp

51 blows

16.50

damp

56 blows

16.50

damp

Very stiff grey silty CLAY with frequent


pockets (<30mm x 30mm x 10mm) of light
grey, occasionally speckled black fine
sand. Occasional light pinkish brown
bivalve and gastropod shells (<10mm x
8mm x 2mm).
(CLAYGATE MEMBER, LONDON CLAY
FORMATION)

14/07/2014
16.50

1800
damp

D 47

EXPLORATORY HOLE ENDS AT 21.50 m

Depth

Records

Type & No

Date
Casing

Struck
(m)

Post strike behaviour

Notes: For explanation of symbols and


abbreviations see key sheet. All depths and reduced
levels in metres. Stratum thickness given in brackets
in depth column.
Scale 1:50

Ground Level
Coordinates
National Grid

(c) ESG www.esg.co.uk


426.4812/09/2014 06:11:37

Depth,Level
(Thickness)
:: 19.27m - x
10mm x 10mm
of dark green
glauconitic clay
and silty clay.
Pockets are
roughly tubular in
shape, inclined
70 to 80 deg.
20.00-20.22 m
Rare pockets of
sand
20.71-20.83 m
Frequent
pockets <30mm
x 20mm x 10mm
of greyish brown
silty fine sand
21.20-21.23 m
slightly
micaceous

Legend

Backfill/
Instruments

21.50

Time
Water

Groundwater Entries
No.

Casing Depth
5.00m
16.50m

Strata

Type & No

21.45

Diameter
200mm
150mm

Chainage

Samples and Tests


Depth

Depth from
to
0.00m
5.00m
5.00m
21.50m

Pilcon 150
Hand dug inspection pit from GL to 1.20m. Cable percussive boring from
1.20m to 21.50m depth.

Depth sealed
(m)

Depth Related Remarks *

Chiselling

From

Depths (m)

to (m)

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Time

Tools used

Borehole

TBH2
Sheet 3 of 3

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Description
NO

GL

Type
From

Brown silty sandy clay fill with brick fill

TO

Seating Blows
1

1.30

Brown sandy CLAY with some gravel traces

8.30

8.50

1.70

Soft to firm orange brown silty very sandy CLAY

10.20

10.60

2.10

Stiff brown weathered CLAY

11.00

11.45

2.30

Fine yellow /broown silty SAND

SHOE

11.50

5.00

Soft brown sandy silt

11.50

11.95

9.60

Firm to stiff brown laminated silty CLAY

12.00

12.45

10.20

Soft grey silty sandy CLAY

SHOE

12.50

11.75

Chiselling/Pits

SPT Test

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)
Pit Dimensions
Groundwater Records

NO

SHOE SAMPLE

DRY

11.00

150MM Water Strikes


Depth

8.50

20

DRY

11.00

150MM Casing Depth

8.50

25

DRY

11.00

150MM Inflow Rate

MED

Rose 20 mins

7.60

Sealed at

Stiff grey fissured CLAY (during u/100 @ 11.50m)

11.00

Water level at start of boring


Water level at end of boring

DRY

Water added from


Water added to

Type

From

Plain
Slotted
Gravel Filter
Bentonite
Bentonite
Bentonite
Tarmac
Screened (Yes/No)
Gas Tap (Yes/No)
12.50

Cover (Flush/Raised)

END OF SHIFT

Diameter of Pipe mm
WAITING FOR BOREHOLE POSITION AND TAKE INDUCTIONS (1 1/4HRS)

Rig Type
GOING TO SITE IN LONDON TO FETCH EXTRA CASING

DIGGING SERVICE PIT (3/4HR )

Foreman
BOREHOLE DAMP FROM 4.10M

U100/T
GARY WHEELER DRILLING

Cable Percussion Daily Record

SITE

Contam

FURNIEAL HOUSE

Dist
CLIENT

Bulk

C/SPT

G WHEELER

Day

TUESDAY

Dates

08/07/2014

Job Number
BH No.

D4061-14

TBH1

To

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Chiselling/Pits

SPT Test

Description
NO

Type
From

TO

12.50

12.95

10

SHOE

13.00

11

13.00

13.45

u/100 @ 14.50m )

12

SHOE

13.50

Firm grey very silty very sandy CLAY with a brown mottling (during

13

13.50

13.95

14

SHOE

14.00

15

14.00

14.45

16

SHOE

14.50

17

14.50

14.95

18

SHOE

15.00

19

15.00

15.45

20

SHOE

15.50

21

15.50

15.95

22

SHOE

16.00

12.50

Stiff grey fissured CLAY

14.20

Soft grey very silty very sandy CLAY with a brown mottling (during
u/100 @ 14 .00m )

14.75

Stiff grey very silty very sandy CLAY with a brown mottling (during

15.25

u/100 @ 15 .00m )

Seating Blows
1

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)

18

WET

11.00

150MM Pit Dimensions

23

WET

11.00

150MM Water Strikes


Depth

15.00

17

WET

11.00

150MM Casing Depth

14.50

DRY

11.00

150MM Rose 20 mins

Groundwater Records

Inflow Rate

MED
14.60

Sealed at

13

DRY

11.00

150MM Water level at start of boring

12

WET

14.50

150MM Water added from

17

WET

14.50

150MM

Water level at end of boring

WET

Water added to

Type

From

To

Plain
Slotted
Gravel Filter
Bentonite
Bentonite
Bentonite
Tarmac
Screened (Yes/No)
Gas Tap (Yes/No)
16.00

Cover (Flush/Raised)

END OF SHIFT

Diameter of Pipe mm
WAITING FOR ENGINEER SO I COULD DRILL BOREHOLE 8AM 10AM (2HRS)

TOLD NO MATTER WHAT THE COST TO DRILL CORRECTLY AND TO DEPTH NO MATTER WHAT THE CO

THE CLIENT SAID HE WOULD HAVE MY CASING PICKED UP FOR ME FROM ANOTHER SITE OF MINE SO I COULD CARRY ON DRILLING .AT 12.30PM THE DRIVER HAD LEFT TO PICK UP

Rig Type
Foreman

Day
CASING FROM WATFORD . I COULD NOT CARRY ON DRILLING AS BOREHOLE WAS CALLAPSING 12.30PM-200PM WAITING FOR CASING LEFT SITE AS CASING WOULD BE AT LEAST 1
Dates

DAYRATE CHARGED
U100/T
GARY WHEELER DRILLING

Cable Percussion Daily Record

SITE

Contam

FURNIVAL HOUSE

Dist
CLIENT

Bulk

C/SPT

Job Number
BH No.

G WHEELER
WEDNESDAY
09/07/2014
D4061-14

TBH1

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Description
NO

16.00

Firm grey very silty very sandy CLAY with a brown mottling

17.80

Stiff grey very silty very sandy CLAY during u/100 @ 17.50

17.80

18.90

21.30

23.00

Chiselling/Pits

SPT Test

Firm grey very silty very sandy CLAY with a brown mottling

As above with some very small amounts of shells

Stiff grey very silty very sandy CLAY during u/100 @ 21-OOM

END OF BOREHOLE

Type
From

TO

23

16.50

16.95

24

SHOE

17.00

25

17.00

17.45

26

SHOE

17.50

27

17.50

17.95

28

SHOE

18.00

29

18.00

18.45

30

SHOE

18.50

31

18.50

18.95

32

SHOE

19.00

33

19.00

19.45

34

SHOE

19.50

35

19.50

19.95

36

SHOE

20.00

37

20.00

20.45

38

SHOE

20.50

39

20.50

20.95

40

SHOE

21.00

41

21.00

21.45

42

SHOE

21.50

43

21.50

21.95

44

SHOE

22.00

45

22.00

22.45

46

SHOE

22.50

47

22.50

22.95

Seating Blows

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)

21

14.40

16.00

150MM Pit Dimensions

25

15.00

16.00

150MM Water Strikes

26

17.00

17.50

150MM Casing Depth

22

WET

17.50

150MM Rose 20 mins

17

WET

17.50

150MM Water level at start of boring

Groundwater Records

Depth

Inflow Rate

Sealed at

15

DRY

17.50

150MM Water added from

13

DRY

17.50

150MM

Water added to

Type
17.50

150MM Plain

20

DRY

17.50

150MM Gravel Filter


Bentonite

23.00

17.00

23

DRY

17.50

150MM Bentonite

13.80

10.00

10.00

0.30

36

DRY

17.50

150MM Concrete

0.30

GL

Backfill

Screened (Yes/No)

50

DRY

17.50

50

DRY

17.50

14.00
13.80

YES

Cover (Flush/Raised)
NO SHOE SAMPLE

17.00
17.00

YES

150MM Gas Tap (Yes/No)

15Diameter of Pipe mm

FLUSH
50

Rig Type
Foreman

DURING INSTALLATION BOREHOLE TOOK A LOT OF SAND OVER THE SLOTTED SECTION POSSIBLE VOID CREATED THROUGH DRILLING

U100/T
Cable Percussion Daily Record

To
GL

DRY

Slotted

From
14.00

20

SLOW PROGRESS DRILLING FROM 16.00M 17.50M (2 1/4 HRS)

GARY WHEELER DRILLING

9.70

Water level at end of boring

SITE

13

Contam

FURNIVAL HOUSE

Dist

12

CLIENT

Bulk

C/SPT

G WHEELER

Day

THURSDAY

Dates

10/07/2014

Job Number
BH No.

D4061-14

TBH1

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Description
NO

GL

Chiselling/Pits

SPT Test
Type
From

Concrete

TO

Seating Blows
1

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)

0.10

Rubble fill

2.30

0.30

fine yellow brown silty sand with brick fil

3.10

2.30

Orange brown sand with gravel and some brick fill fragments

Water Strikes

3.10

Firm orange brown very silty very sandy weathered CLAY with

Depth

tree roots

Casing Depth

Fine brown silty SAND

Inflow Rate

3.70

Pit Dimensions
Groundwater Records

Rose 20 mins
Sealed at
Water level at start of boring
Water level at end of boring
Water added from
Water added to

Type

From

Plain
Slotted
Gravel Filter
Bentonite
Bentonite
Bentonite
Tarmac
Screened (Yes/No)
Gas Tap (Yes/No)
5.00

Cover (Flush/Raised)

END OF SHIFT

Diameter of Pipe mm
WAITING FOR MUCK AWAY 8am 915am (1 HR)

Rig Type

GET RIG ALL 200MM AND 150MM DRILLING EQUIPMENT AND RIG CRANED ONTO POSITION (2 1/2HRS)

Foreman

TOLD THERE WAS ALOT OF BRICK FILL ON BOREHOLE TBH2 HAD TO BE DRILLED IN 200MM CASING (1 MOBILISATION OF 200M CASING CHARGED)
BOREHOLE DRILLED TO 5.00M IN 200MM DIAMETER

Day

REDUCED TO 1500MM CASING@ 5.00M

Dates
U100/T
GARY WHEELER DRILLING

Cable Percussion Daily Record

SITE

Contam

FURNIEAL HOUSE

Dist
CLIENT

Bulk

C/SPT

Job Number
BH No.

G WHEELER
FRIDAY
11/07/2014
D4061-14

TBH2

To

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Description
NO

Type
From

TO

5.70

6.00

8.50

9.00

Firm to stiffgrey fissured siltysandy CLAY

10.30

10.70

11.20

Stiff grey fissured CLAY (during u/100 @ 11.00m)

11.00

11.45

13.70

grey slightly clayey very silty SAND ( during u/100 @ 13.50m )

SHOE

11.50

19.25

Stiff grey fissured silty sandy CLAY

11.50

11.95

19.45

As above with a green sand tinge

SHOE

12.00

Very stiff grey fissured silty sandy CLAY

10

12.00

12.45

11

SHOE

12.50

12

12.50

12.95

13

SHOE

12.50

14

12.50

12.95

15

SHOE

13.00

16

13.00

13.45

17

SHOE

13.500

5.00

Brown silty SAND

5.70

Firm brown siltysandy CLAY

8.50

Soft to firm grey silty sandy CLAY

10.30

19.75

SHEET 1 OF 2

21.50

Chiselling/Pits

SPT Test
Seating Blows
1

18

13.50

13.95

19

SHOE

14.00

20

14.00

14.45

21

SHOE

14.50

22

14.50

14.95

23

SHOE

15.00

24

15.00

15.45

25

SHOE

15.50

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)
Pit Dimensions
Groundwater Records
Water Strikes

13

DRY

10.70

150MM Depth

14.00

Casing Depth

16

DRY

10.50

150MM Inflow Rate

16

DRY

10.50

150MM Sealed at

Rose 20 mins

DRY

10.50

DRY

Water added from

13

DRY

10.50

150MM Water added to

DRY

10.50

150MM

Type
Plain

WET

10.50

150MM Slotted
Gravel Filter

WET

13.70

150MM Bentonite

WET

14.50

150MM Backfill

Bentonite

Concrete

13

WET

15.00

150MM Screened (Yes/No)

10

Contam

FURNIVAL HOUSE

Dist

10

CLIENT

Bulk

C/SPT

To

14.00

GL

19.00

14.00

19.00

13.80

13.80

11.00

21.00

19.00

11.00

0.30

0.30

GL

YES
NO

Gas Tap (Yes/No)

U100/T

From

Cover (Flush/Raised)

FLUSH

Diameter of Pipe mm

50MM

Rig Type

PILCON 150

Foreman

G WHEELER

Dates

SITE

11.00

150MM Water level at end of boring

Day

Cable Percussion Daily Record

13.20

Water level at start of boring

END OF BOREHOLE

GARY WHEELER DRILLING

10.50
MED

Job Number
BH No.

MONDAY
13/07/2014
D4061-14

TBH2

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Description
NO

Type
From

SHEET 2 OF 2

Chiselling/Pits

SPT Test
TO

Seating Blows
1

27

SHOE

6.00

28

16.50

16.95

29

SHOE

17.00

30

17.00

17.45

31

SHOE

17.50

32

17.50

17.95

33

SHOE

18.00

34

18.00

18.45

35

SHOE

18.50

36

18.50

18.95

37

SHOE

18.50

38

18.50

18.95

39

SHOE

19.00

40

19.00

19.45

41

SHOE

19.50

42

19.50

19.95

43

SHOE

20.00

44

20.00

20.45

45

SHOE

20.50

46

20.50

20.95

47

SHOE

21.00

21.00

21.45

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)
Pit Dimensions

11

WET

16.50

Groundwater Records

150MM

Water Strikes

11

WET

16.50

150MM Depth

WET

16.50

150MM Inflow Rate

14

WET

16.50

150MM Sealed at

11

WET

16.50

150MM Water level at end of boring

Casing Depth

Rose 20 mins

Water level at start of boring


DRY

Water added from

17

WET

16.50

150MM Water added to

13

WET

16.50

150MM

Type

From

Plain

17

WET

16.50

150MM Slotted

51

WET

16.50

150MM Bentonite

53

WET

16.50

150MM Backfill

53

WET

16.50

150MM Screened (Yes/No)

Gravel Filter

Bentonite

Concrete
LOST

DOWN

HOLE

Gas Tap (Yes/No)


21.50

Cover (Flush/Raised)

END OF BOREHOLE

Diameter of Pipe mm
Rig Type

PILCON 150

Foreman

G WHEELER

Day
Dates
U100/T
GARY WHEELER DRILLING

Cable Percussion Daily Record

SITE

11

Contam

FURNIVAL HOUSE

Dist

10

CLIENT

Bulk

C/SPT

Job Number
BH No.

MONDAY
14/07/2014
D4061-14

TBH2

To

Gary Wheeler Drilling


Strata Details
Depth

Samples/Testing

Chiselling/Pits

SPT Test

Description
NO

Type
From

Seating Blows

TO

Hours
N Value Water
or Blows Level

Test

Casing
Depth

Casing
From (depth)
Diam.
To (depth)
Pit Dimensions
Groundwater Records
Water Strikes
Depth
Casing Depth
Inflow Rate
Rose 20 mins
Sealed at
Water level at start of boring
Water level at end of boring
Water added from
Water added to

Type

From

Plain
Slotted
Gravel Filter
Bentonite
Bentonite
Bentonite
Tarmac
Screened (Yes/No)
Gas Tap (Yes/No)
Cover (Flush/Raised)
Diameter of Pipe mm

WAITING FOR CRANE AND GETTING ALL EQUIPMENT CRANED OFF SITE 8AM 11.15AM (3 1/4 HRS )

U100/T
GARY WHEELER DRILLING

Cable Percussion Daily Record

SITE

Contam

FURNIEAL HOUSE

Dist
CLIENT

Bulk

C/SPT

Rig Type

PILCON 150

Foreman

G WHEELER

Day

TUESDAY

Dates

15/07/2014

Job Number
BH No.

D4061-14

TBH2

To

ENCLOSURE B
INSTRUMENTATION AND MONITORING

Installation Details

B1

Groundwater Monitoring

B2

September 2014
Issue 1 Rev.1

Report No D4061-14
Enclosure B

TBH1

SP

10 Jul 2014

0.00

13.80

17.00

TBH2

SP

14 Jul 2014

0.00

13.80

19.00

Notes: Type: SP - Standpipe, SPIE - Standpipe


Piezometer, HPIE - Hydraulic Piezometer, PPIE Pneumatic Piezometer, EPIE - Electronic
Piezometer Prepared: 21/08/2014 14:45

Project

Furnival House

Project No.
Carried out for

D4061-14
City Basements Limited

Headworks

Tubing Completion
Details

Base of response
zone (mBGL)

Top of response
zone (mBGL)

Piezometer
Diameter (mm)

Reference depth
(mBGL)

Date of Installation

Hole No

Instrument ID

Installation Type

Groundwater Installation Details

Remarks

Table

B1
Sheet 1 of 1

Groundwater Monitoring
Instrument
Type

Base of
Instrument
(mBGL)

TBH1

SP

17

0.00

4 Aug 2014

9.50

TBH2

SP

19

0.00

4 Aug 2014

9.00

Hole ID

Notes: Type: SP - Standpipe, SPIE - Standpipe


Piezometer, HPIE - Hydraulic Piezometer, PPIE Pneumatic Piezometer, EPIE - Vibrating Wire
Piezometer, PWEL - Pumping Well

Reference
Depth
(mBGL)

Instrument ID

Reading

Date

Time
(hhmmss)

Water Level
(mBGL)

Head
(m above Tip)

* calculated

* calculated

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Comments

Sheet

B2

Sheet 1 of 1

ENCLOSURE C
IN SITU TESTING

Variable Head Permeability Test

September 2014
Issue 1 Rev.1

C1 & C2

Report No D4061-14
Enclosure C

Variable Head Permeability Test


TYPE OF TEST

Standpipe

BOREHOLE No.

TBH1

Rising Head

TEST NUMBER

DATE OF TEST

04 Aug 2014

DETAILS OF INSTALLATION:
Top of response zone
Base of response zone
Groundwater level for analysis
Height of tubing above ground level (datum)
Diameter of standpipe tubing
Elapsed
time, t
(minutes)

Depth to water
from datum (m)

0
0.5
1
1.5
2
2.5
3
3.5
4
5
6
7
8
9
15
20
25
30
35
40
45
50
55
60
80
130
160
190

13.22
13.10
12.95
12.83
12.72
12.65
12.48
12.38
12.28
12.11
11.90
11.76
11.64
11.52
10.95
10.63
10.38
10.20
10.05
9.96
9.88
9.82
9.78
9.74
9.65
9.57
9.56
9.55

14.00
17.00
9.50
0.00
50

Head, Ht
(m)

m BGL
m BGL
m BGL
m
mm

Head Ratio
Ht/H0

CONDITIONS OF TEST ZONE


Ref BS 5930:1999+A2 (2010) Figure 7
Piezometer tip in uniform soil
Diameter of borehole (D)
Length of response zone (L)
Intake Factor (F)

150 mm
3000 mm
5.81 m

REMARKS
3.72
3.60
3.45
3.33
3.22
3.15
2.98
2.88
2.78
2.61
2.40
2.26
2.14
2.02
1.45
1.13
0.88
0.70
0.55
0.46
0.38
0.32
0.28
0.24
0.15
0.07
0.06
0.05

Depth to groundwater prior to test


Depth to water measured from top of standpipe
Permeability calculated using BS 5930:1999 (Section 25.4.6)

1.00
0.97
0.93
0.90
0.87
0.85
0.80
0.77
0.75
0.70
0.65
0.61
0.58
0.54
0.39
0.30
0.24
0.19
0.15
0.12
0.10
0.09
0.08
0.06
0.04
0.02
0.02
0.01

13 litres of water removed with an MP1 pump

CALCULATED VALUES
Differential head at start of test, H0
Differential head at end of test, Hf
Time Elapsed at end of test

3.72 m
0.05 m
190 mins

General Approach

Coordinates of best fit line to data:


t1 = 0.0 mins
t2 = 92.6 mins

Permeability (k)

H1/H0 = 0.500
H2/H0= 0.027

1.8E-07 m/sec

Head Ratio against Time

Head Ratio, Ht/H0 (log scale)

0.1

0.01
0

20

40

60

80

100

120

140

160

180

200

Elapsed Time, t (mins)

Notes:

9.50 m BGL

Project

Furnival House

Project No.
Carried out for

D4061-14
City Basements Limited

Test

Variable Head Permeability Test


TYPE OF TEST

Standpipe

BOREHOLE No.

TBH2

Rising Head

TEST NUMBER

DATE OF TEST

04 Aug 2014

DETAILS OF INSTALLATION:
Top of response zone
Base of response zone
Groundwater level for analysis
Height of tubing above ground level (datum)
Diameter of standpipe tubing
Elapsed
time, t
(minutes)

Depth to water
from datum (m)

0
0.5
1
1.5
2
3
4
5
6
10
15
25
30
35
40
45
50
55
60
90
120

13.99
13.87
13.74
13.64
13.40
13.21
13.02
12.94
12.67
12.00
11.43
10.97
10.70
10.41
10.24
10.07
9.90
9.85
9.78
9.55
9.35

14.00
19.00
9.00
0.00
50

Head, Ht
(m)

m BGL
m BGL
m BGL
m
mm

CONDITIONS OF TEST ZONE


Ref BS 5930:1999+A2 (2010) Figure 7
Piezometer tip in uniform soil
Diameter of borehole (D)
Length of response zone (L)
Intake Factor (F)

Head Ratio
Ht/H0

150 mm
5000 mm
8.53 m

REMARKS
4.99
4.87
4.74
4.64
4.40
4.21
4.02
3.94
3.67
3.00
2.43
1.97
1.70
1.41
1.24
1.07
0.90
0.85
0.78
0.55
0.35

Depth to groundwater prior to test


Depth to water measured from top of standpipe
Permeability calculated using BS 5930:1999 (Section 25.4.6)

1.00
0.98
0.95
0.93
0.88
0.84
0.81
0.79
0.74
0.60
0.49
0.39
0.34
0.28
0.25
0.21
0.18
0.17
0.16
0.11
0.07

13 litres removed with MP1 pump

CALCULATED VALUES
Differential head at start of test, H0
Differential head at end of test, Hf
Time Elapsed at end of test

4.99 m
0.35 m
120 mins

General Approach

Coordinates of best fit line to data:


t1 = 0.0 mins
t2 = 77.9 mins

Permeability (k)

H1/H0 = 0.800
H2/H0= 0.088

1.1E-07 m/sec

Head Ratio against Time

Head Ratio, Ht/H0 (log scale)

0.1

0.01
0

20

40

60

80

100

120

140

Elapsed Time, t (mins)

Notes:

9.00 m BGL

Project

Furnival House

Project No.
Carried out for

D4061-14
City Basements Limited

Test

ENCLOSURE D
GEOTECHNICAL LABORATORY TEST RESULTS

Determination of Moisture Content and Atterberg Limits


Determination of Particle Size Distribution
Determination of Undrained Shear Strength in Triaxial
Compression

September 2014
Issue 1 Rev.1

Report No.
50183344/14/01 to 26
Report No.
50183344/14/29 to 35
Report No.
50183344/14/27 to 28

Report No D4061-14
Enclosure D

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Laboratory
Reference

Location

45219516

TBH1

Report No:
Batch Number:

50183344/14/01
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

B4
Client
Not Advised
04.08.14
07.08.14-12.08.14
Bulk

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

11.50

26

59

20

39

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Laboratory
Reference

Location

45219517

TBH1

Report No:
Batch Number:

50183344/14/02
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

B8
Client
Not Advised
04.08.14
06.08.14-12.08.14
Bulk

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

12.50

29

62

22

40

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219518

TBH1

25

13.00
Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Report No:
Batch Number:

50183344/14/03
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D10
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

69

23

46

100

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Laboratory
Reference

Location

45219519

TBH1

Report No:
Batch Number:

50183344/14/04
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D12
Client
Not Advised
04.08.14
07.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

13.50

26

63

21

42

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Laboratory
Reference

Location

45219520

TBH1

Report No:
Batch Number:

50183344/14/05
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D14
Client
Not Advised
04.08.14
07.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

14.00

26

55

21

34

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown clayey SAND

Laboratory
Reference

Location

45219521

TBH1

Report No:
Batch Number:

50183344/14/06
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D16
Client
Not Advised
04.08.14
11.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

14.50

26

39

Non - Plastic

N/A

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Report No:
Batch Number:

50183344/14/07
DAM0048669

Client Reference: D18


Sampled by:
Client
Date Sampled: Not Advised
Date Received: 04.08.14
Tested From:
07.08.14-11.08.14
Sample Type:
Disturbed

Laboratory
Reference

Location

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic
Limit

Plasticity
Index

% Passing
425m

45219522

TBH1

15.00

23

42

18

24

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

Liquid Limit (%)

Sample Preparation:

110

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Laboratory
Reference

Location

45219523

TBH1

Report No:
Batch Number:

50183344/14/08
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D20
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

15.50

25

46

19

27

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219524

TBH1

Report No:
Batch Number:

50183344/14/09
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D22
Client
Not Advised
04.08.14
11.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

16.00

24

65

19

46

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219525

TBH1

23

17.00
Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Report No:
Batch Number:

50183344/14/10
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D24
Client
Not Advised
04.08.14
06.08.14-11.08.14
Disturbed

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

50

18

32

100

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219526

TBH1

Report No:
Batch Number:

50183344/14/11
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D26
Client
Not Advised
04.08.14
11.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

17.50

1.6

46

18

28

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219527

TBH1

Report No:
Batch Number:

50183344/14/12
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D28
Client
Not Advised
04.08.14
08.08.14-11.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

18.00

3.3

45

18

27

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown CLAY

Laboratory
Reference

Location

45219528

TBH2

Report No:
Batch Number:

50183344/14/13
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D7
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

11.50

11

70

24

46

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219529

TBH2

21

12.00
Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Report No:
Batch Number:

50183344/14/14
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D9
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

68

23

45

100

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219530

TBH2

25

12.50
Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Report No:
Batch Number:

50183344/14/15
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D11
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

66

22

44

100

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown CLAY

Report No:
Batch Number:

50183344/14/16
DAM0048669

Client Reference: D13


Sampled by:
Client
Date Sampled: Not Advised
Date Received: 04.08.14
Tested From:
07.08.14-11.08.14
Sample Type:
Disturbed

Laboratory
Reference

Location

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic
Limit

Plasticity
Index

% Passing
425m

45219531

TBH2

13.00

28

71

24

47

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

Liquid Limit (%)

Sample Preparation:

110

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219532

TBH2

26

13.50
Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Report No:
Batch Number:

50183344/14/17
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D15
Client
Not Advised
04.08.14
07.08.14-08.08.14
Disturbed

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

71

23

48

100

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Laboratory
Reference

Location

45219533

TBH2

Report No:
Batch Number:

50183344/14/18
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D17
Client
Not Advised
04.08.14
08.06.14-11.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

14.00

27

41

20

21

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown silty CLAY

Laboratory
Reference

Location

45219534

TBH2

Report No:
Batch Number:

50183344/14/19
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D19
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

14.50

26

38

Non - Plastic

N/A

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219535

TBH2

Report No:
Batch Number:

50183344/14/20
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D21
Client
Not Advised
04.08.14
11.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

15.00

29

46

17

29

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219536

TBH2

Report No:
Batch Number:

50183344/14/21
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D23
Client
Not Advised
04.08.14
08.08.14-11.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

15.50

26

83

18

65

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219537

TBH2

26

16.00
Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Report No:
Batch Number:

50183344/14/22
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D25
Client
Not Advised
04.08.14
07.08.14-11.08.14
Disturbed

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

52

20

32

100

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Report No:
Batch Number:

Client Reference: D27


Sampled by:
Client
Date Sampled: Not Advised
Date Received: 04.08.14
Tested From:
07.08.14-08.08.14
Sample Type:
Disturbed

Grey brown slightly sandy CLAY


As Received
Location Depth (m)
Moisture
Content (%)

Laboratory
Reference
45219538

TBH2

Low
Plasticity

Liquid
Limit

Plastic
Limit

Plasticity
Index

% Passing
425m

45

17

28

100

23

16.50

Intermediate
Plasticity

50183344/14/23
DAM0048669

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

Liquid Limit (%)

Sample Preparation:

110

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown CLAY

Report No:
Batch Number:

50183344/14/24
DAM0048669

Client Reference: D29


Sampled by:
Client
Date Sampled: Not Advised
Date Received: 04.08.14
Tested From:
08.08.14-11.08.14
Sample Type:
Disturbed

Laboratory
Reference

Location

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic
Limit

Plasticity
Index

% Passing
425m

45219539

TBH2

17.00

25

45

18

27

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

Liquid Limit (%)

Sample Preparation:

110

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219540

TBH2

Report No:
Batch Number:

50183344/14/25
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D31
Client
Not Advised
04.08.14
11.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

17.50

26

45

18

27

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Moisture Content and Atterberg Limits


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Test Results:
Description:

Brown silty CLAY

Laboratory
Reference

Location

45219541

TBH2

Report No:
Batch Number:

50183344/14/26
DAM0048669

Client Reference:
Sampled by:
Date Sampled:
Date Received:
Tested From:
Sample Type:

D33
Client
Not Advised
04.08.14
11.08.14-12.08.14
Disturbed

Depth (m)

As Received
Moisture
Content (%)

Liquid
Limit

Plastic Limit

Plasticity
Index

% Passing
425m

18.00

23

44

20

24

100

Low
Plasticity

Intermediate
Plasticity

High
Plasticity

Very High
Plasticity

Extremely
High Plasticity

80
CL

CI

CH

CV

CE

70
High Shrinkage
Potential

Plasticity Index

60
50
40

Medium Shrinkage
Potential

30
20

Low Shrinkage
Potential

10
MI

ML

MH

MV

ME

0
0

10

20

30

40

50

60

70

80

90

100

110

Liquid Limit (%)

Sample Preparation:

120

130
A Line

As Received, Coarse particles removed by hand prior to test


Estimated % passing 425m BS Test Sieve

Certified that the laboratory testing was carried out in accordance with BS 1377-2: 1990: Method 3.2, 4.3 and 5

Page: 1 of 1
Date: 14.08.14

Signed

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager
For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory

Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown slightly clayey silty SAND


23

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
7
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/29
DAM0048669
45219509

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U9
TBH1
12.80
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.034
0.023
0.016
0.011
0.006
0.004
0.003
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
99
98
97
93
40
34
31
28
21
19
16
13
11
9

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown slightly clayey silty SAND


23

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
7
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/30
DAM0048669
45219510

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U15
TBH1
14.00-14.50
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.034
0.023
0.016
0.011
0.006
0.004
0.003
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
99
97
95
94
92
90
36
28
26
23
20
17
14
12
10
8

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown clayey silty SAND


27

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
6.8
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/31
DAM0048669
45219511

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U23
TBH1
16.50-16.57
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.039
0.027
0.019
0.013
0.006
0.004
0.003
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
100
99
99
99
98
97
52
45
41
38
34
30
27
25
23
20

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown slightly clayey silty SAND


22

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
6.1
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/32
DAM0048669
45219512

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U10
TBH2
12.10-12.30
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.032
0.022
0.016
0.011
0.005
0.004
0.003
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
99
98
97
94
37
28
26
24
22
16
13
10
8
7

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown slightly silty very sandy CLAY


26

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
6.5
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/33
DAM0048669
45219513

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U14
TBH2
13.00-13.45
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.039
0.027
0.019
0.013
0.007
0.005
0.003
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
99
98
97
96
96
94
55
52
51
47
45
42
40
38
36
34

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown silty CLAY/SAND


25

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
6.3
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/34
DAM0048669
45219514

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U16
TBH2
<13.70
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.043
0.030
0.021
0.015
0.007
0.005
0.004
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
99
96
94
91
88
85
63
61
59
58
56
51
48
43
38
29

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Particle Size Distribution


Client:
Client Address:

Postcode:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Site:

D4061-14 Furnival House

Supplier:
Source:

Client
Site

Description:
Moisture Content (%):

Grey brown silty CLAY/SAND


25

Date Received:
Date Tested:

04.08.14
19.08.14

Particle Density (Mg/m3):

2.70 Mg/m

Sample Type:
Mass of Sample (kg):

U100
6.3
SIEVE ANALYSIS

Assumed Value

Report No:
Batch Number:
Lab Ref:

50183344/14/35
DAM0048669
45219515

Client Reference:
Location:
Depth (m):
Sampled from:
Sampled by:
Date Sampled:

U20
TBH2
top 0.05
Site
Client
Not Advised

Determination of Particle Size Distribution


Sieve Size (mm)

Passing
(%)

100
75
63
50
38
28
20
14
10
6.3
5.0
3.35
2.00
1.18
0.600
0.425
0.300
0.212
0.150
0.063
0.039
0.028
0.019
0.013
0.007
0.005
0.003
0.002
0.001

100
100
100
100
100
100
100
100
100
100
100
100
100
99
99
99
98
98
97
53
48
46
41
38
34
32
30
29
27

Nominal Size of Material (mm)


0.001
100

0.01

0.1

10

100

90

Cumulative Percentage Passing

80
70
60
50
40
30
20
10
Clay

Fine Silt

Medium Silt

Coarse Silt

Fine Sand

Medium Sand

Coarse Sand

Fine Gravel

Medium Gravel

Coarse Gravel

Cobble

Certified that the test was carried out in accordance with BS 1377-2: 1990 : Clauses 9.2 & 9.5
Comments :
Preparation Method :

No pretreatment necessary
In accordance with BS 1377-1 : 1990

Page: 1 of 1
Date Reported: 21.08.14

[] M. Carr - Section Manager

Signed

[ ] D. Berrill - Laboratory Manager


For and on behalf of Environmental Scientifics Group
Opinions and interpretations expressed herein are outside the scope of UKAS accreditation

This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

abc
0001

Determination of Undrained Shear Strength in Triaxial Compression


Client:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Report No:
Batch Number:
Date Sampled:
Date Received:
Date Tested:
Sampled By:
Sampling Certificate:
Sample Type:

Site:

D4061-14 Furnival House

Sample Details:

Laboratory Reference:
Client Ref:
Location:
Depth (m):
Initial Height (mm)
Initial Diameter (mm)
Bulk Density (Mg/m)
Moisture Content (%)
Dry Density (Mg/m)

45219505
U3
TBH1
11.22-11.45
196
103
1.91
27
1.51

45219506
U15
TBH1
14.00-14.50
195
105
1.95
26
1.55

Test Conditions:

Cell Pressure (kPa)


Rate of Strain (%/min.)

220
0.01

280
0.01

Failure Conditions:

Max Deviator Stress (kPa)


Membrane Correction (kPa)
Strain (%)
Shear Strength (kPa)

175
1.50
20.9
88

152
1.14
14.4
76

Shear/Barrel
3.1
0.40

Shear/Barrel
9.3
0.40

50183344/14/27
DAM0048669
Not Advised
04.08.14
12.08.14
Client
Not Received
U100

Failure Diagram:

Mode of Failure:
Depth of test specimen from base within original sample (mm)
Membrane Latex Rubber Thickness (mm)
Sample Description:
45219505
Brown silty CLAY
45219506
Brown sandy CLAY

Comments:

Sample Preparation:
Orientation:

Undisturbed
Maintaining sample direction.

Certified that the test was carried out in accordance with BS 1377-7 :1990, Method 8
Certified that the Moisture Content was determined in accordance with BS 1377-2:1990, Method 3.2

Page
Date:

1 of 1
14.08.14

Signed:

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager

For and on behalf of Environmental Scientifics Group


Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

abc
0001

Determination of Undrained Shear Strength in Triaxial Compression


Client:

Environmental Services Group


Askern Road, Carcroft
Doncaster
South Yorkshire
DN6 8DG

Report No:
Batch Number:
Date Sampled:
Date Received:
Date Tested:
Sampled By:
Sampling Certificate:
Sample Type:

Site:

D4061-14 Furnival House

Sample Details:

Laboratory Reference:
Client Ref:
Location:
Depth (m):
Initial Height (mm)
Initial Diameter (mm)
Bulk Density (Mg/m)
Moisture Content (%)
Dry Density (Mg/m)

45219507
U6
TBH2
11.00-11.45
210
103
1.98
26
1.57

45219508
U20
TBH2
14.50-14.95
210.5
103
2.00
25
1.59

Test Conditions:

Cell Pressure (kPa)


Rate of Strain (%/min.)

220
0.01

280
0.01

Failure Conditions:

Max Deviator Stress (kPa)


Membrane Correction (kPa)
Strain (%)
Shear Strength (kPa)

172
1.12
13.8
86

207
1.45
20.0
103

Shear/Barrel
19
0.40

Barrel
11
0.40

50183344/14/28
DAM0048669
Not Advised
04.08.14
12.08.14
Client
Not Received
U100

Failure Diagram:

Mode of Failure:
Depth of test specimen from base within original sample (mm)
Membrane Latex Rubber Thickness (mm)
Sample Description:
45219507
Brown sandy CLAY
45219508
Brown grey silty sandy CLAY

Comments:

Sample Preparation:
Orientation:

Undisturbed
Maintaining sample direction.

Certified that the test was carried out in accordance with BS 1377-7 :1990, Method 8
Certified that the Moisture Content was determined in accordance with BS 1377-2:1990, Method 3.2

Page
Date:

1 of 1
14.08.14

Signed:

[] M. Carr - Section Manager


[ ] D. Berrill - Laboratory Manager

For and on behalf of Environmental Scientifics Group


Opinions and interpretations expressed herein are outside the scope of UKAS accreditation
This Test Report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory
Environmental Scientifics Group. Registered in England No. 2880501. Registered Office: ESG House, Bretby Business Park, Ashby Road, Burton on Trent DE15 0YZ

TEST REPORT

Environmental Scientifics Group


2 Newton Close
Drayton Fields Industrial Estate
Daventry
Northants NN11 8RR
Telephone: +44 (0) 1327 703828
Facsimile: +44 (0) 1327 300154

ENCLOSURE E
DRAWINGS

Site Location Plan

E1

Site Plan

E2

September 2014
Issue 1 Rev.1

Report No D4061-14
Enclosure E

Site Location Plan


N

THE
SITE

Reproduced from the 2002 Ordnance Survey 1:50 000 scale Landranger
map No 176 by permission of Ordnance Survey on behalf of The Controller
of Her Majesty's Stationery Office, Crown copyright, Environmental
Services Group Limited. All rights reserved. Licence Number 100006060

Notes:
Scale 1:50 000

Project

Furnival House, Highgate, North London

Project No.
Carried out for

D4061-14
City Basements Limited

Figure

E1

TBH02

TBH01

TITLE:

SITE PLAN

SITE:

FURNIVAL HOUSE, CBL276


50 CHOLMELEY PARK
HIGHGATE, LONDON
N6 5EW

REFERENCE:

EDITED FROM GEA J12235 NOV 2012


SITE PLAN PAGE 33

PRODUCED BY: RICK WILLEMSE


GEOENVIRONMENTAL ENGINEER
TOUREEN GROUP LTD

LEGEND:

NOTES:
NOT FOR CONSTRUCTION
GEA 2012 BOREHOLE LOCATION

25 CECIL ROAD
HARROW AND WEALDSTONE
MIDDLESEX
HA3 5QY
020 8424 7999

ESG 2014 BOREHOLE LOCATION

E2
12-09-2014

Vous aimerez peut-être aussi