Académique Documents
Professionnel Documents
Culture Documents
Description:
TOPAZ GLOSS EMULSION 580ME is a high quality acrylic copolymer based topcoat with
excellent opacity, washability, minimum dirt pick-up and good colour retention properties. Its
smooth gloss finish gives the surface good durability against harsh weather conditions.
Certificates:
TOPAZ GLOSS EMULSION 580ME complies with Saudi Arabian Standards (SASO) for gloss emulsion.
Area of use:
Interior and exterior walls, ceilings and partitions where glossy finish is desired.
Substrates:
Physical Constants:
Colours/Shade nos:
Finish:
Volume Solids, %:
Theoretical spreading rate:
Flash point:
Specific gravity:
Dry to touch:
*The theoretical spreading rate has been calculated for the stated volume solids and dry film
thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of
the substrate and the relevant consumption factor.
The physical constants are subject to normal manufacturing tolerances.
Further reference is made to "Explanatory Notes".
Application Details:
Application method:
Thinner (max. vol.):
Cleaning of tools:
Indicated film thickness, dry:
Indicated film thickness, wet:
Recoat interval, min.:
Recoat interval, max.:
Brush/roller
Fresh water (5%)
Fresh water
30 microns
75 microns
4 hours (10C)
None
Conventional spray
Fresh water (15%)
2 hours (20C)
None
Airless spray
Fresh water (5%)
1 hour (40C)
None
Surface condition:
The surface should be stable, firm, dry and free from dust, sand, loose old paint, laitance, dirt,
grease and oil. It is recommended to apply a primer/sealer prior to the application of the specified
filler. Touch-up with primer/sealer on areas repaired with filler is recommended prior to application
of topcoats.
Sealing/Priming:
Filling:
Remarks:
Use only where application and drying can proceed at temperatures above 5C, preferably above
10C and relative humidity is below 75%.
Other sealer/filler types may be specified.
Drying data given is on the assumption that proper ventilation is provided.
References:
Pack sizes:
Shelf Life:
Product must be stored as per local regulations, and should be kept in dry and well ventilated
location far from heat and direct sunlight. Cans should be tightly closed after use. Mix well
before use.
ISSUED:
Page 1 of 2
Safety:
Handle with care. Before and during use, observe all safety labels on packaging and paint
containers consult HEMPEL Material Safety Data Sheets and follow all local or national safety
regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take
precautions against possible risks of fire or explosions as well as protection of the environment.
Apply only in well ventilated areas.
ISSUED:
Page 2 of 2