Académique Documents
Professionnel Documents
Culture Documents
1 of 1
http://www.materialdatacenter.com/ms/en/Ramshine/Polyram+Ram+o...
Rheological properties
ISO Data
Molding shrinkage, parallel
Melt flow index, MFI
MFI temperature
MFI load
Value
Unit
Test Standard
0.5
11
220
10
%
g/10min
C
kg
Mechanical properties
ISO Data
Tensile Modulus
Yield stress
Strain at break
Flexural modulus (23C)
Izod Impact notched, 23C
Rockwell hardness
ASTM Data
Flexural Strength
Value
Unit
Test Standard
2400
50
12
2000
16.5
R 112
MPa
MPa
%
MPa
kJ/m
-
ISO 527-1/-2
ISO 527-1/-2
ISO 527-1/-2
ISO 178
ISO 180/1A
ISO 2039-2
70
MPa
ASTM D 790
Thermal properties
ISO Data
Temp. of deflection under load (1.80 MPa)
Value
Unit
Test Standard
89
ISO 75-1/-2
Other properties
ISO Data
Density
Value
Unit
Test Standard
1040
kg/m
ISO 1183
Characteristics
Processing
Injection Molding
Special Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be
free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is
especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision
about the application of materials must be double checked with the producer of this material. This includes all contents of this
system. Copyright laws are applicable for the content of this system.
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision
about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested.
Free online registration is available.
03-06-2015 16:06