Académique Documents
Professionnel Documents
Culture Documents
info
http://www.hiren.info/pages/bootcd-on-usb-disk
PROCEDURE
PROCEDURE PROCEDURE
PROCEDURE PROCEDURE
CULATION
By RATHOD UMESH at 10:23:10 AM,
16-Aug-15
By RATHOD
UMESH at 10:23:07 AM, 16-Aug-15
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
Step 1
Connect USB Pen Drive (1GB or more)
2
By RATHOD UMESH Step
at 11:35:33
AM, 16-Aug-15
Download and Run USB Disk Storage Format
USBFormat.zip (34KB)
PROCEDURE
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
CALCULATION
By RATHOD UMESH at 10:23:06 AM, 16-Aug-15
1 of 2
Step 3
grub4dos.zip (179KB) and Run as Administrator
CALCULATION CALCULATION
Download grubinst_gui
CALCULATION CALCULATION
By RATHOD UMESH at 10:27:00 AM, 16-Aug-15
By RATHOD UMESH at 11:26:26 AM, 16-Aug-15
CALCULATION
CALCULATION
By RATHOD UMESH at 10:27:02 AM, 16-Aug-15
14-Aug-15 02:18 PM
2 of 2
http://www.hiren.info/pages/bootcd-on-usb-disk
Step 4
Insert the BootCD (10.3 or newer) in the CD Drive and Copy everything from CD to USB
Flash Drive
CALCULATION
Step 5
Copy grldr and menu.lst
from grub4dos.zip
(or from
HBCD folder) to the usb drive
By RATHOD
UMESH at 11:20:20
AM, 16-Aug-15
CALCULATION
By RATHOD UMESH at 11:21:55 AM, 16-Aug-15
CALCULATION
By RATHOD UMESH at 11:21:55 AM, 16-Aug-15
Step 6
Test Your USB Drive (read bottom of the page for troubleshoot)
Make sure you set your computer to boot from USB Flash Drive
To Enter the BIOS press the "Del" button on your keyboard. Alternatives are "F1", "F2",
"Insert", and "F10". Some PC's BIOS might even require a different key to be pressed.
Commonly a PC will show a message like "Press [Del] to enter Setup" to indicate that you
need to press the "Del" key. Some AMI BIOS require you to enable the option "USB
Keyboard Legacy support"!
For AMI BIOS:
Go to "Feature Setup". "Enable" these options: "USB Function Support",
"USB Function For DOS" and "ThumbDrive for DOS". Go to "Advanced Setup".
Set the "1st Boot Device" to "USB RMD-FDD".
Reboot the PC and it now should boot from the Usb Stick.
Go to "USB Mass Storage Device Configuration". Select "Emulation Type"
and set it to "Harddisk". Go to the "Boot Menu" and set the "1st boot device" to
"USB-Stick". Exit the BIOS, saving the changes.
you can try "Emulation Type" to "Floppy" or "Forced FDD".
For PHOENIX/AWARD BIOS:
Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".
Troubleshoot
If you cannot install grub4dos (or you get "cannot run background program" message)
then use syslinux to boot grub4dos
More
CALCULATION
By RATHOD UMESH at 10:58:30 AM, 16-Aug-15
CALCULATION
CALCULATION
CALCULATION
By RATHOD UMESH at
10:58:34
AM, 16-Aug-15
By RATHOD
2015 www.hiren.info. All Rights Reserved. About us | Privacy
Policy |UMESH
Contactat
us10:58:33 AM, 16-Aug-15
14-Aug-15 02:18 PM