Académique Documents
Professionnel Documents
Culture Documents
european powder
metallurgy association
Technical Programme
& Registration
Congress Centre Basel, Switzerland
16th - 19th September 2012
www.epma.com/pm2012
Design for PM
A new e-learning resource for designers and engineers
Gain the
benefits of
PM for your
components
www.designforpm.net
Congress Schedule
Congress Organiser
Euro PM2012 is sponsored and organised by the European Powder Metallurgy Association (EPMA), in cooperation with key
members of the PM fraternity in Switzerland and Liechtenstein. The EPMA, founded in 1989, is the leading PM trade association
representing the interests of the entire European PM community, and promoting PM technology throughout the world. EPMA
members will qualify for special discounts on their registration fees, and further information on membership and EPMAs
services can be found on www.epma.com.
Congress Chairmen
Mr Georg Breitenmoser,
Managing Director,
Parmaco Metal
Injection Moulding AG,
Switzerland
Dr Steven Moseley,
Chief Scientist
Business Unit Drilling
and Demolition, Hilti
AG, Liechtenstein
Euro PM2012
Steering Committee
Mr Luigi Alzati (Timcal SA, Switzerland)
Mr Georg Breitenmoser (Parmaco Metal Injection Moulding AG, Switzerland)
Mr Beat Hofer (Hofer Werkstoff, Switzerland)
Dr Steven Moseley (Hilti AG, Liechtenstein)
Mr Martin Wilhelm (Erowa Ltd, Switzerland)
The EPMA would like to express its sincere thanks to the members of the Technical Programme Committee for their support
and hard work in structuring the Euro PM2012 programme, and also, in advance, to Session Chairmen for refereeing the
submitted papers.
Congress Schedule
SUNDAY 16 SEPTEMBER
15.00 - 19.00
16.00 - 18.00
18.30 - 20.00
Congress Schedule
MONDAY 17 SEPTEMBER
08.00 - 18.15
09.30 - 11.30
OPENING PLENARY SESSION and presentation of EPMA Distinguished Service Awards and
EPMA PM Thesis Competition Awards
11.30 - 12.30
12.30 - 14.30
14.30 - 16.00
TECHNICAL SESSIONS
SESSION 1: PM Miniaturization and Nano
SESSION 2: PM Lightmetals
SESSION 3: Hardmetals - Processing
SESSION 4: PM Improving by Design
14.30 - 16.00
16.00 - 16.30
REFRESHMENT BREAK
16.30 - 18.00
TECHNICAL SESSIONS
SESSION 5: PM Non Ferrous
SESSION 6: PM Biomaterials
SESSION 7: Hardmetals - Characterisation and Application
SESSION 8: PM Improving by Process
16.30 - 18.00
08.00 - 18.15
11.30 - 18.00
11.30 - 18.00
Basel, Switzerland
European Structural Parts Group (ESPG) Parts Makers Meeting (by invitation)
Registration and Information Desk Open
Exhibition Open
Poster Show Open
Courtesy of MTC
Euro PM2012
TUESDAY 18 SEPTEMBER
08.15 - 18.15
09.00 - 10.30
TECHNICAL SESSIONS
SESSION 9: PM Improving Compaction and Shaping
SESSION 10: Powder Injection Moulding - Modelling and Simulation
SESSION 11: Hardmetals - Cermets and Ceramics
SESSION 12: Hot Isostatic Pressing 1
10.30 - 11.00
REFRESHMENT BREAK
11.00 - 12.30
TECHNICAL SESSIONS
SESSION 13: PM Stainless Steels
SESSION 14: Powder Injection Moulding - Titanium
SESSION 15: Diamond Tools and Ultrahard Materials
SESSION 16: Hot Isostatic Pressing 2
12.30 - 14.30
14.30 - 16.00
TECHNICAL SESSIONS
Congress Schedule
16.00 - 16.30
REFRESHMENT BREAK
16.30 - 18.00
TECHNICAL SESSIONS
Session 20: PM Secondary and Finishing
Session 21: Powder Injection Moulding - Special Materials 2
Session 22: PM Dimensional Control
Session 23: PM Applications
16.15 18.15
20.00 23.30
08.15 - 18.30
09.00 - 18.00
09.00 - 18.00
Basel, Switzerland
09.00 10.30
10.30 11.00
REFRESHMENT BREAK
11.00 12.30
Congress Schedule
Hard Materials - Atoms to Applications: Multi Scale Modelling and Experiments Part 2
Material Properties and Material Selection for Hot Isostatic Pressing Part 2
12.30 - 14.00
13.30 17.30
13.30 17.30
Tour to Hartmetall AG
13.30 14.30
08.15 - 14.15
09.00 - 14.15
09.00 - 14.15
N.B. The preliminary programme for Technical Sessions and Social Events included in this publication is provisional. The final
programme and precise timing of all events scheduled for Euro PM2012, together with a definitive listing of papers to be
presented in Oral and Poster Sessions, will be published in the 'Euro PM2012 Congress Guide' distributed to delegates in Basel.
Please also check www.epma.com/pm2012 for updates.
Courtesy of GKN
Technical Programme
Euro PM2012
Euro PM2012 Technical Programme
Keynote and Oral Papers, together with Special
Interest Seminars, will be integrated in to a 3
day programme of presentations.
Poster papers will be displayed in a specially
designated area for the duration of the event.
The full programme of papers accepted by the
Technical Programme Committee can be found
on the following pages.
Oral
Improvement of Sintering Behaviour of Ti by
Colloidal Techniques
Garcia, R; Gordo, E (University Carlos III Madrid, Spain);
Sanchez, A J (ICV-CSIC, Spain)
Poster
Nanosized Nickel Powders Synthesized by a
Reduction Method Assisted by Ultrasound
Cabanas-Polo, S; Ferrari, B; Sanchez-Herencia, A J (Instituto de
Ceramica y Vidrio, Spain); Argirusis, C (National Technical
University of Athens, Greece)
Research into the Structure of Al-Containing
Nanocomplexes Screened Polymeric Cover of
Natrium-Carboxymethylcellulose
Anatonova, N (South Russian State Technical University,
Russia)
Development of Composite Powder Materials Steel
- Copper Alloy with Improved Mechanical and
Tribological Properties Using the Method of
Poster
Sintering-Dissolution Process for Manufacturing
Ni-625 Superalloy Foams
Gulsoy, O; Unver, I (Marmara University, Turkey)
Properties of Porous Aerators of SpongeTitanium
Powder with Reinforcing Additives
Savich, V; Taraykovich, A; Bedenko, S (Powder Metallurgy
Research Institute, Belarus)
Appropriate Binder System in Production of PM Low
Carbon Steel Hollow Spheres
Behnam, M (Akhshan Company, Iran); Lima, M M (Iran
Powder Metallurgy Complex, Iran)
Elimination of Intermetallic Phases on Sphere-Matrix
Interface in Aluminum-Steel Composite Metal Foams
Processed by Casting
Behnam, M (Akhshan Company, Iran); Lima, M M (Iran PM
Complex, Iran)
Technical Programme
Oral
Technical Programme
Oral
Oral
Influence of Milling Conditions in WC/Co Processing
Caspers, B; Zumdick, M (H C Starck GmbH, Germany)
Effect of Solids Loading on the Performance of
Cemented Carbide Extrusion Feedstock
Blackham, B; Al-Dawery, I; Fair, J (Sandvik Hard Materials,
United Kingdom), Blackburn, S (University of Birmingham
IRC, United Kingdom)
Sintering Behaviour of Binderless Tungsten Carbide
Poetschke, J; Richter, V; Gestrich, T (Fraunhofer Institute IKTS,
Germany)
Interaction of Nitrogen with WC and NitrogenAssisted Sintering of Hardmetals
Lengauer, W; Wawrzik, S (Technical University Vienna, Austria);
Wetzel, M (Technical University Freiberg, Germany)
Poster
Study Regarding the Production of WC/Co Cutting
Tools Produced Through PIM Technology
Cora, V S; Vida-Simiti, I; Brandusan, L (Technical University of
Cluj Napoca, Romania)
Effect of Nano-Yttria Addition on the Properties of
WC/Co Composites
El-Kady, O (CMRDI, Egypt)
10
Poster
Case Study Regarding the Behaviour of the
Structural Gradient from Various Composite
Materials (WC-Ni), Used to Manufacture Ball Valves
for the Oil Extraction Industry
Besleaga, C; Negriu, R M; Badea, S G (Econet Prod Bucharest,
Romania); Popescu, I (Industrial Biogas Solutions, Romania)
Hardness Prediction of Heat Treated Iron Parts
Manufactured by Powder Metallurgy Using Neural
Network and Fuzzy Rule-Based Models
Ahmadian, M; Yousefli, S (Iran Powder Metallurgy Complex,
Iran)
Wear Characteristics of High Chromium Alloyed
Steel
Shvab, R; Hvizdos, P; Dudrova, E (Slovak Academy of Sciences,
Euro PM2012
Slovakia); Bergman, O; Bengtsson, S (Hgans AB, Sweden)
Compressibility Prediction of Reduced Water
Atomized Iron Powder Using Fuzzy Model
Ahmadian, M; Lima, M M (Iran Powder Metallurgy Complex,
Iran); Behnam, M (Akhshan Company, Iran); Semiari, O
(University of Tehran, Iran)
Preliminary Sintered Powder Metallurgy Parts NDT
Investigation by High-Resolution TDI Based X-Ray
Digital Radiography
Iovea, M; Stefanescu, B; Mateiasi, G (Accent Pro 2000,
Romania); Amos, M; Halai, H (TWI NDT Validation Centre,
United Kingdom); Ponomarev, M; Kappatos V; Selcuk, C; Gan,
T-H (Brunel Innovation Centre, United Kingdom); Gierl, C
(Technical University of Vienna, Austria)
Poster
Effect of Binder Phase Composition and Cooling Rate
on the Properties of Liquid Phase Sintered Tungsten
Heavy Alloys
Durlu, N (TOBB University of Economics and Technology,
Turkey); Calyskan, N K (Tubitak, Turkey); Bor, S (METU,
Turkey)
Comparing Particle Rearrangement During Liquid
Phase Sintering of Cu-20Zn and Cu-10Sn-10Pb
Prepared from Prealloyed Powder
Azadbeh, M (Sahand University of Technology, Iran);
Danninger, H; Gierl, C (Vienna University of Technology,
Austria)
Session 6: PM Biomaterials
Chairmen: Dr Martin Bram (Forschungszentrum
Juelich GmbH, Germany)
Ing Sander Leeflang (Delft University of
Technology, Netherlands)
Oral
From Powder to Complex-Shaped NiTi Structures by
Selective Laser Melting
Bormann, T; Schumacher, R; Mller, B; de Wild, M (School of
Life Sciences, University of Applied Sciences North Western
Switzerland, Switzerland)
Metal Injection Moulding of Low Modulus Ti-Nb
Alloys for Biomedical Applications
Bidaux, J-E; Closuit, C; Rodriguez-Arbaizar, M; CarrenoMorelli, E (University of Applied Sciences Western
Swizterland, Switzerland)
Bacterial Colonization of Porous Titanium Coatings
for Orthopaedic Implant Applications A
Comparison
Braem, A; Van Mellaert, L; Hofmans, D; De Waelheyns, E; Ann,
J; Schrooten, J, Van der Biest, O; Vleugels, J; (KU Leuven,
Belgium)
Effects of Production Method and Space Holder
Materials on Microstructure of Porous Titanium
Bram, M; Buchkremer, H P (Forschungszentrum Juelich
GmbH, Germany); Tuncer, N (Anadolu University, Turkey)
Poster
Loading and Distribution of Ag Nanoparticles in
Porous TiO2 Antibacterial Layers
Necula, B S; Apachitei, I; Zaat, S A J; Fratila Apachitei, L E;
Leeflang, M A; Duszczyk, J; (Delft University of Technology,
Netherlands)
11
Technical Programme
Oral
Technical Programme
Poster
Effect of Silicon on the Mechanical Properties of
WC-Ni Hard Metal
Lee, G-G (Pukyong National University, Korea), Jang, K-H
(High Materials Corp, Korea); Ha, G-H (Korea Institute of
Materials Science, Korea)
Stereological Approach to Microstructural
Engineering of Hard Materials
Osmakov, A; Rumyantsev, V; Boykov, S (Virial Ltd, Russia);
Fischev, V (St Petersburg State Institute of Technology, Russia)
Microstructure and Mechanical Properties of WC-10
wt% Stainless Steel Composites
Senos, A; Vilhena, L M (University of Aveiro/CICECO,
Portugal); Fernandes, C M (University of Coimbra, Portugal);
Sacramento, J (Durit Metalurgia Portuguesa do Tungstenio,
Portugal)
Oral
Effect of Morphology on Quantitative Analysis of
Cemented Carbides
Coronel, E; Fahlgren, Ch; Lattemann, M (Sandvik Tooling
Sverige AB, Sweden)
On the Understanding of Cemented Carbide
Degradation in Rock Drilling - the Importance of
Metallographic Sample Preparation
Olovsj, S; Johanson, R (Atlas Copco Secoroc, Sweden);
Bexell, U; Olsson, M (Dalarna University, Sweden)
Fracture Toughness of Rock Bit Cemented Carbides
Llanes, L (Universitat Politecnica de Catalunya ETSEIB, Spain);
Roebuck, B; Mingard, K (National Physical Laboratory, United
Kingdom) Chan, P; Tarres, E; James, M; Tillman, M (Sandvik
Hard Materials, United Kingdom); Torres, Y (UPC, Spain);
Mestra, A (Sandvik Smith, Spain); Viswanadham, R K; Liang, B
12
Chairmen:
Dr Eberhard Ernst (GKN Sinter Metals GmbH
Bad Brueckenau, Germany)
Dr Jan Kazior (Cracow University of Technology,
Poland)
Oral
Means to Lift Mechanical Properties to the Next
Level Enabling New Challenging Applications
Larsson, C; Engstrm, U; Berg, S (Hgans Sweden AB,
Sweden)
Carbon Control in PM Sintering: Industrial
Applications and Experience so Far
Nyborg, L; Hryha, E (Chalmers University of Technology,
Sweden); Malas, A (Linde Gas, Germany); Berg, S (Hgans AB,
Sweden); Wiberg, S (AGA AB, Sweden)
Dimensional Behaviour and Microstructure of Sinter
Hardenable PM Low Alloy Steels Containing
Manganese
Pieczonka, T; Sulowski, M (AGH University of Science &
Technology, Poland)
Energy Balance of a Belt Sinter Furnace
Ernst, E (GKN Sinter Metals Engineering, Germany)
Euro PM2012
Poster
Intensification of Haematite Iron Ore Concentrate
Reduction by Hydrogen Recirculation
Fedorov, D (Ladotherm, Ukraine)
Production of Silver Powders by Prep Atomization
Karakulak, E; Zeren, M, Yamanoglu, R; (Kocaeli University,
Turkey)
Preparation of Ti based Solid-Solution Powder
Kwon, H; Roh, K-M; Lim, J-W (Korea Institute of Geoscience
& Mineral Resources, Korea)
Influence of Spraying on the Properties of HighSpeed Steel Powder R6M5K5
Antonishin, Y; Turtsevich, E (Belarusian State Agrarian
Technical University, Belarus)
Oral
Advanced Pressing Options for Electrical Powder
Presses - Side Compaction and Cross Holes
Lackner, L (Dorst Technologies GmbH, Germany)
New PM Process with Wrought Steel Properties
Aslund, C (Metec Powder Metl AB, Sweden)
Poster
Production of Wear-Resistant Iron Based Powder
Materials by Hot Forging in the Presence of Liquid
Phase
Dorofeyev, V; Dorofeyev, Y; Babets, A; Goncharova, T (South
Russian State Technical University, Russia); Vodolazhenko, R
(Pyatigorsk State Pharmaceutical Academy, Russia)
Technology of Manufacture of Products from
Deformation of Sintered Medium Alloy Powder Steels
Billets After a Special Heat Treatment
Ilyuschenko, A; Kireev, P (Powder Metallurgy Research
Institute, Belarus)
Production of Copper-Based Powder Material by
Multi-Channel Angular Extrusion of Porous Powder
Billets
Usatyuk, D; Ryabicheva, L (East Ukrainian National University,
Ukraine); Bagliuk, G; Shtern, M (Frantsevich Institute for
Problems of Materials Science, Ukraine)
Structure of Zirconium and Zirconium Alloy
Consolidated by High Voltage Electric Discharge
Consolidation
Grigoryev, E (Moscow Engineering Physics Institute, Russia);
Olevsky, E (San Diego State University, United States of
America)
Oral
Recent Developments in Metal and Ceramic Micro
Injection Moulding
Piotter, V; Honza, E; Mueller, T; Plewa, K (Karlsruhe Institute of
Technology, Germany)
Modelling and Simulation of Mising Stage of MIM
Feedstocks
Gelin, J-C; Hamza, D; Barrire, T (ENSMM, France)
Modelling and Numerical Simulation of Thermal
Debinding Processing in Powder Injection Molded
Parts
13
Technical Programme
Technical Programme
Poster
Oral
Oral
Integration of Cermet Component Materials into a
Solid Solution Master Alloys by Mechanically SelfSustaining Reaction
Cordoba, JM; Chicardi, E; Sayagues, M J; Gotor, F J (ICMSCSIC), Spain)
Densification, Microstructure and Thermal Properties
of TiCN-WC-Ni-Co-Cr Alloys Used in Hot Rolling
Applications
Sanchez, J M; Iparraguirre, I; Iturriza, I (CEIT, Spain)
Sintering of Zirconium Carbide-Based Composites
Yung, D-L; Kollo, L; Hussainova, I (Tallinn University of
Technology, Estonia); Zikin, A (AC2T Research GmbH,
Austria)
Oxidation Behaviour Study and Comparison with
Commercial Materials of an Iron-Matrix Cermet
Reinforced with TiCN.
Alvaredo, P; Abajo, C; Gordo, E (University Carlos III Madrid,
Spain)
Poster
Sintering of Fe and Ni Base MMCs Reinforced with
Fused Tungsten Carbide Particles
Danninger, H; Kuzmanovic, J; Gierl, C (Vienna University of
Technology, Austria); Zikin, A (AC2T, Austria)
14
Poster
Multiphase Nickel Aluminides Produced by Hot
Isostatic Pressing of Nanocomposite Powders
Obtained by Mechanical Alloying
Martin, J M; Fuente, A; Iturriza, I; Castro, F (CEIT & TECNUN
(University of Navarra), Spain)
Properties and Near-Net-Shape Process of Powder
Metallurgy Heat Resistant Titanium Alloy
Wang, L; Zhang, X; Lang, Z; Shi, J (Aerospace Research
Institute, China)
Euro PM2012
Poster
Oral
Oral
MIM Fabrication and Mechanical Properties of Ti-Nb
Alloys as Implant Material
Zhao, D; Ebel, T; Pyczak, F; Willumeit, R (Helmholtz-Zentrum
Geesthacht, Germany)
Co-Sintering of Titanium/Stainless Steel Bi-Material
Parts Produced by 2C-MIM
Mulser, M; Hartwig, T; Petzoldt, F (Fraunhofer IFAM, Bremen,
Germany)
Moulding Equipment for the Processing of Coarse
Powders by MIM
Maetzig, M (Arburg GmbH & Co KG, Germany)
Microstructure and Mechanical Properties of Metal
Injection Moulded Ti-6Al-4V After Thermo-Chemical
Treatment
Sidambe, A; Derguti, F; Todd, I (University of Sheffield, United
Kingdom)
Oral
Hot Pressing of Al-Si + Diamond MMC Materials for
Electronic Cooling Applications
Falk-Windisch, H; Neubauer, E; Kitzmantel, M; Castillo Ruano,
P (RHP Technology GmbH & Co KG, Austria)
Superhard, Electroconductive cBN - Ceramic Matrix
Composites
Klimczyk, P; Figiel, P; Putyra, P; Wyzga, P (Institute of Advanced
Manufacturing Technology, Poland)
Transverse Rupture Strength Properties of Diamond
Impregnated Metal Matrix
Dwan, J (Institute of Technology Tallaght, Ireland)
Structure Analysis of the Interfacial Area Between
Diamonds and Metal Matrices
Steffen, A; Tolan, M; Ferreira, M; Tillmann, W(Technical
University of Dortmund, Germany)
Poster
Development of Diamond Cutting Tool Using
Electrolytic Iron Powder
Dhokey, N; Utpat, K (Government College of Engineering,
India); Dhoka, P; Gosavi, A (Industrial Metal Powders Pvt Ltd,
India)
Wear Resistance of cBN-Containing Cemented
Carbides
Hirsch, A; Yin, L; Carpenter, M; Chan, P (Sandvik Hard
Materials, United Kingdom)
New Cu-Co Coated Diamond Powders for Grinding
Wheels
Iakubovskaia, S; Babaskina, S; Korbit, A (Belarusian National
Technical University, Belarus); Kulbitskaya, L (Belarusian
Academy of Sciences, Belarus)
Study of Composite Powder Materials Formed on the
Basis of Carbide Grains and Aggregates of Synthetic
Diamonds
Ilyuschenko, A; Poberezhnyi, S; Baran, A (Powder Metallurgy
Research Institute, Belarus)
15
Technical Programme
Technical Programme
Oral
Status of ASME Code Approval for PM/HIP Near Net
Shapes
Novotnak, D; Lherbier, L (Carpenter Powder Products,
United States of America); Gandy, D W (Electric Power
Research Institute, United States of America)
Argon Determination in Tool Steel produced by Hot
Isostatic Pressing
Prattes, K; Lang, K; Foelzer, A (Bohler Edelstahl GmbH,
Austria)
Effect of Argon in HIP Parts, Permissible Value and
Determination of Concentration
Hofer, B (Hofer Material and Marketing Consultancy,
Switzerland); Volker, K-U (Bodycote HIP GmbH, Germany);
Bigolin, F (Robert Mathys Foundation, Switzerland)
Properties of Stainless Steel Powder
Chychko, A; Mallipeddi, D; Sundin, S (Erasteel Kloster AB,
Sweden)
Poster
Boron Behaviour Under the Compression Tests of the
HIPed Semi-Product Specimens of the Type EP741NP
Nickel-Based Superalloy
Shulga, A (Moscow Engineering & Physics Institute, Russia)
Oral
Cavitation Resistant NiTi Coatings with
Pseudoelastic Properties Produced by Vacuum
Plasma Spraying (VPS)
Bitzer, M; Mauer, G (Forschungszentrum Juelich GmbH,
Germany); Rauhut, N (Ruhr University of Bochum, Germany)
Influence of Grain Size on Mechanical Properties of
Soft Magnetic Composite Material
Karbowiak, M; Slusarek, B (Tele and Radio Research Institute,
Poland)
Pressureless Sintering of Silicon Bimodal Powder
Compacts Under Controlled Atmosphere
Lebrun, J-M; Pascal, C; Missiaen, J-M (SIMaP, France); Servant, F
(CEA, France)
Development of Porous Metal Supports for H2
Separation Membranes: Surface Modification
Agote, I; Lagos, M (Tecnalia, Spain); Calero, J A (Ames SA,
Spain)
Poster
Design of Fe/SiO2 composites with Compact SiO2
Coating Prepared by Sol-Gel Method
Strekov, M; Kbatov, G; Dudrov, E; Burs, R (Slovak
Academy of Sciences, Slovakia)
Preparation and Characterization of Core-Shell
Composite Based on Fe Powder and PhenolFormaldehyde Resin Modified with Nanometer-Sized
Sio2
Strekov, M; Burs, R; Fberov, M; Medveck, L (Slovak
Academy of Sciences, Slovakia); Fzer, J; Kollr, P (Pavol Jozef
Safarik University, Slovakia)
Porous Gadolinium Magnetocaloric Material for
Magnetic Refrigeration
Bidaux, J-E; Hamdan, H; Zamni, L; Forchelet, J (University of
Applied Sciences Western Switzerland, Switzerland)
Fabrication of Metallic Iron Green Pieces by Colloidal
Procesing Techniques in Aqueous Media.
Escribano, J A; Ferrari, B; Sanchez, J (Instituto De Ceramica y
Vidrio, Spain); Gordo, E (University Carlos III Madrid, Spain)
Pack Aluminisation of Sintered Steels
Orban, R; Salomie, D; Orban, M; Lung, T (Technical University
of Cluj Napoca, Romania)
16
Euro PM2012
A Comparison of Microstructure and Properties of
Copper-Tungsten Composites Processed by Rapid
Hot Pressing and Conventional Hot Pressing
Neubauer, E; Garcia. L; Kapaun, W; Falk-Windisch, H;
Kitzmantel, M (RHP Technology gmbH & Co KG, Austria)
Effect of Fuel Content and Extra MgO on the
Formation of MgNb2O6
Hatirnaz, N B (Eskisehir Osmangazi University, Turkey);
Mergen, A (Marmara University, Turkey)
Rare-Earth Bonded Hybrid Magnets Produced with
the Addition of Strontium Ferrite Powders
Rodrigues, D; Janasi, S R (BRATS Sintered Filters & Metallic
Powders, Brazil); Antunes da Silva, B F (IPEN, Brazil); de
Campos, M F (EEIMVR-UFF, Brazil)
Poster
Combination of Two Distinct Materials by PIM
Technology to Achieve a Synergic Effect
Auzene, D; Lebel (CRITT-MDTS, France); Halleux, J; Lagayesse,
(Sirris, Belgium)
Powder Injection Molding - New Developments in
Metals and Ceramics
Godin, M (Mate Consulting Ltd, China) Khole, P (Khole
Sintering Solutions, India)
Oral
New Opportunities, Using the Next Generation HIP
Equipment
Eklund, A; Grdin, M; Hjrne, J; Sehlstedt,S (Avure
Technologies AB, Sweden)
Influence of Powder Pre-Densification on the
Consolidation of Stainless Steel 316L During HIP
van Nguyen, C; Bezold, A; Broeckmann, C (IWM, RWTH
Aachen, Germany)
Impact Toughness for PM HIP
Bengtsson, B O (Carpenter Powder Products AB, Sweden)
Del Corso, G (Carpenter Technology Corp, United States of
America)
Numerical Calculations of the Temperature
Distribution in a HIP Furnace
Hjrne, J; Eklund, A; Grdin, M; Akerberg, A (Avure
Technologies AB, Sweden)
Poster
Effect of Heat Treatment on Carbon Behaviour in the
HIPed Products of the Type EP962P Ni-Based
Superalloys
Shulga, A (Moscow Engineering & Physics Institute, Russia)
Oral
Means to Enhance Machinability of Low Alloyed PM
Steels
Engstrm, U; Berg, S; Larsson, C; Andersson, O (Hgans AB,
Sweden)
Corrosion Protection of Powder Metallurgy Al Alloys
by Sol-Gel Based Coatings Systems
Carbonell, D; Hidalgo, J; Jimenez-Morales, A (Universidad
Carlos III Madrid, Spain)
Particle Size Characterisation of Gas Atomised
Powders
Strondl, A; Eggertson, C; Frisk, K; Angr, A (Swerea KIMAB AB,
Sweden)
17
Technical Programme
Oral
Poster
Investigation of the Weldability of Al2O3 Reinforced
Alumix 231 Based Composite Materials Produced by
Powder Metallurgy Route
Gokem, U; Karakoc, H; Ates, H; Turker, M (Gazi University,
Turkey)
Technical Programme
Poster
Multipolar Anistoropy and Domain Semicircular
Alignment in Sintered Strontium Hexaferrite Shaped
by PIM Technology
Nikolic, M V; Aleksic, O; Nikolic, N (Institute for
Multidisciplinary Research, Serbia); Vasiljevic-Radovic, D
(IChTM, Serbia)
Production of Ni 718 Superalloys by Powder Injection
Moulding
Ozgun, O (Bingol University, Turkey); Gulsoy, H O (Marmara
University, Turkey); Findik, F; Yilmaz, R (Sakarya University,
Turkey)
Oral
Development of a Digital Radiographic Inspection
Technique for Production Friendly Quality
Assessment of Powder Metallurgy Parts
Ponomarev, M; Kappatos, V; Selcuk, C; Gan, T-H (Brunel
Innovation Centre, United Kingdom); Amos, M (TWI NDT
Validation Centre, United Kingdom); Iovea, M (Accent Pro
2000 Ltd, Romania)
Oral
18
Euro PM2012
Session 23: PM Applications
Chairmen: Mr Sigurd Berg (Hgans AB,
Sweden)
Prof Radu Orban (Cluj Napoca Technical
University,
Oral
Manufacturing of Functional Sintered Parts with
Inherently Stored Information and Integrated Status
Monitoring
Vahed, N; Behrens, B-A; Kammler, M; Mroz, G (University of
Hannover, Germany)
Cleanliness: Effects of the Particles on the Functional
Components of a Gearbox
Ebroussard, J-L; Prato, A (Federal Mogul - Sintertech, France)
Poster
Synthesis of Bi-Te System Thermoelectric Powder by
a Mechano-Chemical Process
Lee, G-G (Pukyong National University, Korea) Ha, G-H
(KIMS, Korea)
Thermoelectric Properties of -Zn4Sb3 Synthesized
by Mechanical Alloying and Vacuum Hot Pressing
Lee, P-Y (National Taiwan Ocean University, Taiwan)
Anisotropy of Dimensional Variation and its Effect on
Precision of Sintered Parts
Molinari, A; Cristofolini, I; Menapace, C; Pilla, M (University of
Trento, Italy)
Technical Programme
www.pmdatabase.com
19
Technical Programme
Opportunity for new research topics from the development of new type/grade of powders, development of new
forming processes will also be discussed.
20
Euro PM2012
Technical Programme
The seminar will host selected speakers from industry and academia, dealing with different aspects of the process, of
the materials and of the applications.
21
Technical Programme
22
Euro PM2012
Technical Programme
23
Exhibitors
Exhibition Area
Entrance /
Exit to the
Technical
Session Rooms
24
Euro PM2012
EXHIBITOR LIST
Alvier AG PM - Technology
Yuelong Superfine Powders
PMCTec GmbH
Eisenmann Anlagenbau GmbH & Co. KG
Nova Swiss *NEW*
Sacmi Imola S.C.
45
46
47
48
49
50
8
10
12
13
14
15
16
18
19
20
23
51
53
54
55
56
58
60
61
62
63
64
24 Timcal SA
65 Polis Prcis
25
26
27
28
31
32
33
35
37
38
39
66
67
68
69
70
72
73
40
41
42
43
44
Exhibitors
1
2
3
4
5
6
Steuler - KCH
Bodycote HIP
Yangzhou Haili Precision Machinery
LMI GmbH
GGP Metal Powder AG
Sandvik Osprey Ltd - Powder Group
Dorst Technologies
25
Stand: 63
Exhibitor Profile
The Aluminium Powder Company Ltd, Alpoco, is a world leader and major producer of air and gas atomised
aluminium powders and centrifugally spun aluminium needles and granules. The company began manufacturing
aluminium powders in 1940, at Minworth in the UK, when Metals and Alloys, the former parent company, became
a supplier of coarse powders for military applications. In 1969 Alpoco was incorporated and in 1970 a powder
atomising facility was established on a new site in Holyhead on the island of Anglesey, North Wales. In 1999 Alpoco
acquired a 51% share in Benda Lutz Alpoco, (BLA) Skawina, Poland.
Alvier AG PM-Technology
Fabrikstrasse 17
CH-9470 Buchs SG
Switzerland
Exhibitor Profile
Alvier AG PM-Technology provides turnkey solutions for the production of complex P/M parts. This includes
engineering services for the design of P/M parts and P/M tools and the production of compaction tools, sizing
tools or helical gear tools. Additionally we give full technical support on-site at the customer during the run-off of
a new component. Alvier also supplies production equipment like helical gear systems, specialized die-sets and
pick-and-place devices. All solutions are customized to the individual requirements.
Exhibitors
ARBURG GmbH + Co KG
Stand: 1
member
Exhibitor Profile
Ametek and Reading Alloys produce specialty powders primarily for aerospace, automotive, electronic,
hardware and medical industries. Products include Ultra 300 and 400 series stainless powders for P/M, MIM,
and filter markets, nickel base thermal spray powders and specialty powders such as titanium CP and Ti 6/4
powders for medical applications. Ametek / Reading Alloys is a world leader in research, development and
manufacture of high-grade aerospace master alloys, specialty metals, and coatings materials AMETEK is a
leading global manufacturer of electronic instruments and electromechanical devices with annual sales of $2.5
billion. AMETEKs Corporate Growth Plan is based on Four Key Strategies: Operational Excellence, Strategic
Acquisitions & Alliances, Global & Market Expansion and New Products. AMETEKs objective is double-digit
percentage growth in earnings per share over the business cycle and a superior return on total capital.
Arthur-Hehl-Strasse
D-77290 , Lossburg
Germany
member
Stand: 26
member
Exhibitor Profile
ARBURG is one of the world's leading manufacturers of injection moulding machines and holds a leading
position in the PIM sector for decades. The PIM range includes ALLROUNDER injection moulding machines,
which are especially equipped for the processing of powder materials, a comprehensive customer
support and training courses.
Stand: 56
member
Avure Technologies AB
Quintusvgen 2
SE-72166 VSTERS,
Sweden
Exhibitor Profile
Avure Technologies is the largest, most trusted supplier of hot and cold isostatic presses to the global powder
metal industry. Formerley ASEA/ABB, the company produces isostatic presses ranging from laboratory scale
up to in excess of 3 meters working diameter using Avures own QUINTUS wire-winding technology. Avure
is well regarded for engineering turnkey solutions including a total project management in building and
delivering complex systems, providing global service and support, and retrofits / upgrades.
Stand: 23
member
26
Euro PM2012
BASF SE
Stand: 28
Exhibitor Profile
BASF is the inventor and leading producer of Carbonyl Iron Powder (CIP). For 80 years BASF has been
developing in close collaboration with its customers the most varied applications for CIP.
With its unique background in plastics technology, metal powder production and new materials research,
BASF has become a solution provider for powder injection molding (PIM). BASF offers its customers and
end users support in the material selection, consulting for part and mold design, feasibility studies,
simulation of the molding process, pilot runs, assistance during start-up and regular production, training.
member
Kolbinger Strae 7
83527 Haag-Winden
Germany
Exhibitor Profile
Operating an international network of facilities, Bodycote is the worlds leading provider of thermal
processing services. Experienced in supporting large multi-national customers and their supply chains, as
well as local niche specialists, Bodycote provides a vital link in the manufacturing process for virtually
every market sector including aerospace and defence, automotive, power generation, oil & gas,
construction, medical and transportation.
Stand: 67
member
Exhibitor Profile
Burkard Metallpulver Vertrieb (bmv) was founded by Harald Burkard in 2006. Almost 30 years of experience in
global marketing of powder materials form the backbone of successful consultancy and business support. The
company considers itself as a service point between manufacturer and consumer, supporting either side for
both, sales and marketing as well as sourcing and supply.The major focus of bmv is on powder metallurgy
processes and surface technology.
At this point, bmv is representative for fine powders of AP&C (Raymor) Canada (Ti), AT&M China (stainless,
high and low alloyed steel), Eurotungstene France (W, WC, W/Cu, Ni, Co), Hilderbrand Switzerland (Ag, Au,
Pd), H.C.Starck for refractory metal (W, Mo) components and Wall Colmonoy UK for Colferoloy (Fe-base
thermal spray powders).
Exhibitor Profile
CPP is producer of gas atomised powders such as tool steel/high Speed steel, stainless steel, Ni-and
Co-based alloys for the use in MIM, thermal spraying, PTA welding, or for conversion to PM-ingots and
shapes by means of hot isostatic pressing (HIP) or Dynaforging. At production sites in USA and in Sweden,
CPP operates different atomizing technologies which produce ultrafine powders for the metal injection
moulding up to coarser powders for thermal spraying, PTA welding, rapid prototyping, near net shape
technology, hot isostatic pressing and super clean powders for tool steel.
member
Dsselthalerstr 9
Dsseldorf, 40211,
Germany
Stand: 55
Stand: 46
member
Exhibitor Profile
CREMER Thermoprozessanlagen-GmbH is one of the world's leading furnace suppliers with nearly 40
years experience and world-wide references, especially for sintering furnaces in the field of PM up to
2.000C with protective gas atmospheres and accessory equipment. Supported by our R&D departments
for innovative custom-made developments for PM and MIM. Professional representatives and service
offices all over the world.
Stand: 16
member
27
Exhibitors
Mittenwalder Strae 61
Kochel am See
D-82431
Germany
Stand: 73
Exhibitor Profile
DORST TECHNOLOGIES is one of the world's leading suppliers of machines and equipment for producing
metal powder products. Intensive research and development efforts have always focused primarily on the
development of intelligent forming concepts. Specialists at DORST TECHNOLOGIES stand for the highest
technological standards and offer the promise of continuous enhanced development in close co-operation
with our customers.
member
Stand: 47
Exhibitor Profile
ECKA Granules is the global leading manufacturer of non-ferrous metal powders. The product portfolio
includes a wide range of powders and pastes from coarse to ultrafine (< 5 m) including Aluminium, Copper,
Magnesium, Stainless Steel, Tin, Lead, Zinc, Silicon, and their alloys, as well as ready-to-press blends.
Production techniques include milling and grinding, air-, water- and gas-atomisation, granulation and melting
for recycling processing.
Exhibitors
member
Tbinger Strae 81
71032 Bblingen,
Germany
Exhibitor Profile
EISENMANN is a leading global engineering, procurement and construction supplier in the fields of general
finishing technology, material flow automation, environmental technology as well as process & high temperature
technology.
For your tasks in Powder Metallurgy, EISENMANN presents itself as innovative system and development partner
with long-time experience in high temperature technology. Our furnace concepts provide high throughput and
utmost flexibility through temperature, speed and atmosphere separation. Talk to us and find out more about
efficient sintering of new as well as established alloying systems.
member
Exhibitor Profile
ELINO is development partner of the sintering industry since 1950 and global market leader in powder
production equipment and process technology for:
Hardmetals
Sintering PIM
Aluminium and non-ferrous
Precious metals
Refractory metals
Iron
Alloyed powders
Exhibitor Profile
Elnik Systems, founded in 1969, is a world leader in the furnace industry and supplier of "One
Source" MIM Debinding and Sintering equipment. Elnik provides Catalytic, Solvent and Water
Debinding equipment that all have the same shelf system as their MIM Sintering Furnaces, providing
faster transfers from Debinding oven to the furnace without having to reset parts. All equipment
comes with a fully integrated computer system.
DSH Technologies, LLC our affiliate, can be your partner in developing any or all of your MIM
Processes before you invest; use our furnaces, optimize your parts or let us help set up your plant.
28
Stand: 4
Stand: 8
member
Stand: 27
member
Euro PM2012
Engineered Pressure Systems International
Walgoedstraat 19
Temse, B-9140
Belgium
Exhibitor Profile
ESPI is one of the world leading manufacturers of:
- Cold Isostatic Presses (wet bag)
- Hot Isostatic Presses (HIP)
- High Pressure Deep Sea & Deep Well Simulators
and Reactor Vessels
ISO 9001:2000 TV certified.
Production plants in Belgium and USA.
Stand: 31
- Quartz Growing Equipment
- High Pressure Pumps
- Cold Isostatic Presses (dry bag), for which we represent
world-wide FREY GmbH Werkzeug- und Maschinenbau
Germany
member
Stand: 20
ERASTEEL SA
Stand: 60
Exhibitor Profile
Erasteel is the world leading producer of gas-atomized metal powders.
Erasteel, a member of ERAMET Alloys, has built up the world's largest capacity. With 7 atomization units
including the brand new DurinTM atomizer located in Sderfors, Sweden, Erasteel can supply a wide
range of powders and steels with a high level of cleanliness.
Standard and customer specific grades are available in Ni- and Co- base alloys, stainless steels, tool steels,
high speed steels and other specialty alloys for many applications: hot isostatic pressing, thermal spraying,
centrifugal casting, etc.
Erowa AG Ltd
Knutwilerstrasse 3
PO. Box
6233
Switzerland
member
Exhibitor Profile
Workholding, palletizing and automation for CNC machine tools. Zero point tooling systems enable fast
exchange of fixtures with capability for off-line set-up. Automation available with job management
software. EDM Tooling.
Stand: 12
member
29
Exhibitors
member
EPMA
Showcase
Exhibitor Profile
The European Powder Metallurgy Association (EPMA) was formed in Brussels in 1989 and has three key
missions To Promote and Develop PM Technology inEurope
To Represent the European PM Industry within Europe and
Internationally.
To Develop the Future on PM
Come and visit our booth to see the EPMAs recent activities.
Exhibitors
Rauenstein
Gewerbepark 16
96528 Frankenblick
Germany
Stand: 32
Exhibitor Profile
FCT Systeme GmbH is a leader in the development and manufacture of sintering systems such as hot
presses and systems for spark plasma sintering, gas pressure sintering and vacuum sintering up to ultrahigh temperatures, especially in the sectors of powder metallurgy and engineering ceramics.The
consistent implementation of our customers' demands not only requires technical competence, but also
leads to high-tech solutions at the maximum productivity level.
In the recent past we have focused on the development of spark plasma sintering technology (SPS), with
the result that various system concepts are now available, from the laboratory scale to large-scale
industrial use.This technology offers entirely new capabilities especially in the development of new,
innovative hightech materials that cannot be manufactured with other processes.
Exhibitor Profile
Fraunhofer IFAM has facilities in Bremen and Dresden and carries out contract research on the manufacture
of metallic components in a near final geometric shape using powder metallurgical technology. Customerorientated results are achieved in the following business fields:
Fraunhofer IKTS
Fraunhofer Institute for Ceramic Technologies and Systems
Winterbergstrasse 28
01277 Dresden
Germany
Exhibitor Profile
The institute covers the complete field of advanced ceramics, from basic research to applications. Structural
ceramics, functional ceramics, and hard metals/cermets set up the priorities with emphasis on innovative
complex systems which are applied in many industry sectors.
Stand: 35
member
Stand: 19
member
30
Euro PM2012
Frey & Co GmbH
Papyrerstr. 12
Lenggries-Fleck
D-83661
Germany
Stand: 31
Exhibitor Profile
Frey is one of the leading manufacturers in the world of Cold Isostatic Presses (dry bag).
Our manufacturing program is as follows:
- Isostatic Presses
- Construction Work
- Rotary Presses for isostatic pressing, like balls etc
- Systems for Hydraulic and Isostatic Presses - Isostatic Presses for spark-plug pressing
- Hydraulic and Isostatic Presses
- Isostatic Presses for dental industry
- Hydraulic Presses
- Isostatic Presses for medical technology
GGP Metalpowder AG
Eckart Plaza
Kaiserstrae 30
90763 Frth
Stand: 70
Exhibitor Profile
GGP is biggest producer of Electrolytical Cu powder worldwide.
Total capacity of 15.000 t/year. Specialty: silver-coated Cu powders from 3 -20 % Ag (Cyanide process).
Offers also : water-atomised Cu & Cu-alloys, Leaded Bronze, Tin and Zinc powders.
ISO TS 16949 and ISO 9001:2008 certified. Worldwide sales activities to all key industries.
member
Graphit Kropfmhl AG
Exhibitor Profile
Graphit Kropfmhl AG has a 140 year tradition of competence in raw materials. With our permanent will
to create, market proximity, and absolute customer orientation we have become a trend-setting graphite
refiner. State-of-the-art and quality-conscious high-technology as well as an intensive dialogue with
customers and partners allow us to develop high-quality special products. In order to secure the supply of
raw materials we hold shares in mines located in Europe, Africa and Asia.
Haili Press
Stand: 48
member
Contact : Ms Shirely
T 0086 514 877 83722
F 0086 0514 877 783721
W www.hailijixie.com
Stand: 68
Exhibitor Profile
Yangzhou Haili Precision Machinery Manufacturing Co., Ltd is the leading manufacturer and supplier of highprecision automatic mechanical powder press and calibrating machines. We have dedicated ourselves in this
sector more than 20 years. Our press tonnage ranges up to 500 tons max. And the tailored pressing solution
according to customs specification is also available. The pursuit of high-accuracy compaction technology and
state-of-art shaping solution are our persistent driving motion.
Hgans
Corporate Headquarters
SE-263 83 Hgans
Sweden
Exhibitor Profile
Hgans develops, manufactures and sells metal powders that open up a world of opportunities. Based on
joint application engineering and prototyping in our PoP Centre, we continuously extend the market for
metal powder technology into new application areas. Powder metallurgy gears are one example. After
proving the concept of load carrying PM transmission gears, we continue to drive development of
innovative PM gear solutions. This includes micro design optimization, helical gear manufacturing, system
level analysis and PM integration as well as new gearbox concepts for electric vehicles.
Join our collaborative force for an ideal interaction of material development, process optimization and
application design the key to successful product development and industrialization.
We push the limits of metal powder.
Stand: 18
member
31
Exhibitors
Langheinrichstrae 1
D-94051 Hauzenberg
Germany
Exhibitor Profile
FOERSTER is the global leader in eddy current and magnetic field measurement technology
for non-destructive testing (NDT), metal detection and magnetic sensors.
At the Euro PM2012 FOERSTER will be presenting its KOERZIMAT 1.097 HCJ for
measurement of coercive field strength HcJ and its KOERZIMAT 1.097 MS for measurement
of weight-specific saturation magnetism s and saturation induction Bs. KOERZIMAT measures all values
independent of specimen geometry.
These magnetic characteristics correlate to other properties i.e. grain size and therefore lend themselves also for
process control.
Stand: 25
Exhibitor Profile
ipmd.net is a dedicated news and information website for the PM industry. We cover business and technology
developments relating to all areas of PM, including sintered components, hardmetals, magnets, diamond tools and
more. Register for our free weekly e-newsletter at www.ipmd.net.
Stand: 39
Exhibitors
The ipmd.net website also provides online access to the comprehensive International PM Directory database of all
PM parts producers and industry suppliers worldwide.
Kerafol GmbH
Stegenthumbach 4-6
D-92676 Eschenbach i.d. OPf.
Exhibitor Profile
KERAFOL - Keramische Folien GmbH is one of the world leaders in manufacturing ceramic tapes and
subtrates of different materials for various applications in the fields of Thermal Management, Filter Technology
and Advanced Ceramics. We are specialized in producing high performance sintering bases made of porous
alumina ceramic suitable for sintering LTCC, SOFC, piezoceramics, dental ceramics and metal injection
molding (MIM). We also offer the development and production of tape by customer provided powder
material.
Exhibitor Profile
The success story of KOMAGE began in 1908 in Berlin with an innovation: the first press for industrial
application. Many more innovations from KOMAGE have followed since then: such as, in 1976, the first
worldwide free programmable CNC-powder press or in 1990, the first worldwide mechanical-hydraulic
press. In the future KOMAGE will continue to set its emphasis on its innovations.
Lauffer Pressen
32
Stand: 54
Stand: 21
member
Stand: 41
member
Euro PM2012
LINDE AG, LINDE Gases Division
Exhibitor Profile
The Linde Group is a world leader in the international industrial gases market. We offer a wide range
of compressed and liquefied gases as well as chemicals, and we are therefore an important partner for
a huge variety of industries. Linde gases are used, for example, in steel production, refining, chemical
processing, environmental protection and welding, as well as in food processing, glass production and
electronics. We are also investing in the expansion of our fast-growing Healthcare business, i. e. medical
gases, and we are a leading global player in the development of environmentally friendly hydrogen
technology.
Industrial Furnaces
Robert - Bosch - Str. 7-9
73207 Plochingen
Germany
Buckley Road,
Rochdale
OL12 9DT,
United Kingdom
Stand: 61
member
Exhibitor Profile
Makin Metal Powders (UK) Ltd are a major manufacturer of copper and copper alloy powders. The
product range includes Atomised copper powder both irregular and spherical, Atomised bronze powder
of varying compositions in both irregular and spherical shape, Brass powders, tin powder and Electrolytic
copper powder. These powders and other specialty grades are supplied world-wide through a network of
experienced agents.
Contact us for further information at: www.makin-metals.com or 44-1706-717317
member
Exhibitor Profile
MAHLER is a leading manufacturer of industrial furnaces for the P/M and other industries with almost 60
years of experience. Our range of products reaches from standard sintering furnaces with 300 - 1300 mm
belt width to highly specialized roller hearth furnaces. Pure hydrogen atmospheres up to 1300C are
possible as well as throughput capacities of about 2,500 kg/hour. The development of solutions that fit our
customers requirements perfectly is our business.
Stand: 69
Stand: 58
member
33
Exhibitors
Exhibitor Profile
LMI is one of the world's leading manufacturers of MIM/CIM debinding furnaces, with over 20 years of
experience in explosion-proof process technology. Numerous kinds of feedstock can be processed, as
binder systems are removed by organic solvents or water. LMI's compact solvent debinding furnaces
start at 50 litres of volume. They combine debinding, vacuum drying and solvent recovery in one single
unit. Larger solvent debinding systems consist of two units: a debinding furnace with up to 2,500 litres and
a parallelly operated solvent recovery system. All systems can be extended on a modular basis.
Mahler GmbH
member
Stand: 40
Exhibitor Profile
Since 1969 Linn High Therm is one of the leading manufacturers of electrically heated furnaces. The
product line includes industrial and lab furnaces / kilns, rotary tube furnaces, sample preparation units
for spectroscopy, precision fine casting machines, microwave and induction heating units, debinding
and sintering furnaces for ceramics, microwave dryers. Out of the ordinary units according to
customer's specification are our speciality. Sales offices in Moscow, Russia, and Shanghai, PR China,
and more than 50 agents represent Linn High Therm all over the world.
Am Gemeindegraben 10
63741 Aschaffenburg
Germany
Stand: 43
LMI GmbH
5, Ming-Lung Road,
Yang-Mei,
32663
Taiwan
New at Euro
PM2012
Stand: 38
Exhibitor Profile
Malico Inc. was established in 1982. Every year, we invest certain amount of capital in R&D to develop
new processes and capabilities. With seven in-house capabilities (forging, machining, extrusion, casting,
skiving, stamping, and MIM), Malico has proved itself to be the metal forming technology leader. The
company started developing MIM capability about three years ago. It was a natural extension of our
product line since it already has sintering and plastic injection molding machines available in house for
other products.
MEDAV GmbH
Exhibitor Profile
MEDAV is a German company with 75 employees.
MEDAV is developer and supplier to the automotive industry for non-destructive testing (NDT) systems.
Acoustic Resonance Inspection is the technique applied, CrackMaster the fully automated system solution for
mass product manufacturers. Benefits of CrackMaster: Starting with production items (most of them are good),
automated drift adaptation.
Exhibitors
Nabertherm GmbH
Nabertherm GmbH
Bahnhofstr. 20
28865 Lilienthal
Germany
Exhibitor Profile
Nabertherm with 350 employees worldwide have been developing and producing industrial furnaces for
many different applications for over 60 years. As a manufacturer, Nabertherm offers the widest and
deepest range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer
proof of our commitment to excellent design, quality and cost efficiency. Short delivery times are
ensured due to our complete inhouse production and our wide variety of standard furnaces. In the field
of Powder Injection Molding, Nabertherm offers different furnace concepts like catalytic and thermal
debinding furnaces as well as sintering furnaces for MIM and CIM.
Exhibitor Profile
Nanjing Hanrui Cobalt Co., Ltd. was established in 1997, and it is a comprehensive enterprise that
specializes in exploitation and refining of cobalt ore, as well as R & D production and sales of cobalt
powder and cobalt chemicals. Hanrui Cobalt headquarters in Nanjing, Jiangsu, China, and it holds Metal
Mines SPRL (D.R.Congo) and Jiangsu Runjie New Materials Co., Ltd. The key product of Nanjing Hanrui
Cobalt Co., Ltd. is all types of cobalt metal powders whose output can reach 1200 metallic tons per
year. The production capacity will be increased to 1500 metallic tons per year in December 2010 and it
will reach 2000 metallic tons per year in December 2011.
Rmerstrae 28
83410 Laufen - Leobendorf
Germany
34
member
Stand: 64
Exhibitor Profile
NMD provides full service into Powder Metallurgy and Metal Powder Industry.
Besides customized development work and project-related consulting, sourcing and supply of high quality PM
raw materials and metal powders are provided, including tailormade specialities like specified powder/
components mixtures and semi-finished PM materials. A fully equipped PM lab for the characterisation of raw
materials assures high quality level and stability of supply.
NMD is official sales representative of : Ultra-Infiltrant, LLC,Metallied S.A.
Stand: 33
Stand: 13
Stand: 50
member
Euro PM2012
NovaSwiss
Nova Swiss
31, rue Denis Papin
F-77240 CESSON
New at Euro
PM2012
Exhibitor Profile
Nova Swiss SARL develops, produces and supplies high pressure components and systems for critical
applications involving pressure ranges up to 150.000 psi (10.000 bar).
Stand: 5
Nova Swiss SARL can also take charge of the maintenance (periodic regulatory servicing and reproof tests) or
upgrades of high pressure installations, like isostatic presses, pressure cycling benches, vessels, optical cells, etc.
Main applications: oil & gas, chemicals, food processing, powder compacting, jet water cutting, military
equipments, R&D (geology, materials etc.).
Osterwalder AG
Industriering 4
Postfach 176
CH-3250 Lyss, Switzerland
Exhibitor Profile
OSTERWALDER AG, the leading Swiss manufacturer of high performance powder compacting technology, will
present the following highlights:
- Servo-electrically driven powder press line CA-SP Electric
- Cross pressing / split-die technology
- CA-HM line combination of multi-plate technology with cross pressing
- Advanced flexibility of CA-NC II series: custom configurations, multi-compacting technology etc.
- CA-MP, KPP and UPP technology for cost-efficient manufacturing of multi-level compacts
- Technology & Service products for increased overall equipment effectiveness
We are looking forward to welcoming you at our booth no 61!
Exhibitor Profile
Leading manufacturer of atomisers for high quality metal powder
production:
member
Stand: 15
PMCtec GmbH
Braunfelser Str. 8-12
Leun, D-35638
Germany
Exhibitor Profile
Metal Powders for sintered parts
Powders and Additives - Standard or Tailormade
Press Ready Mixes
Additives for Press Ready Mixes (Lubricant, Graphite,...)
Contract blending
Stainless-Steel Powders (e.g. AISI 304L/316L/410L)
Green scrap recycling
Cast-Iron Powders
Stand: 3
15t or 5t batch size
Copper and Copper-Alloy Powders
25.000 ton per year blending capacity
Nickel and Cobalt-Alloy Powders
10kg, 150kg, 1000kg blender for development and samples Ferrosilicon Powders
State of the Art laboratory (ICP, XRF, C/S/O/N, 80t Press) Various Ferroalloys
ISO9001 certified
Proven technology
member
35
Exhibitors
Stand: 10
Zone Artisanale
Grand Fontaine
F-25320, France
Stand: 65
Exhibitor Profile
Polis Prcis provides the following products:
Full sets of powder compression tools (Dies, Punches, needles, Core rods, Ejectors )
Injection moulds parts (PIM / CIM)
Wearing parts of carbide and steel tools (brazed parts)
Fast equipment repairs.
Polishing, Fitting, Control, Methods, Hard material machining (EDM, Precision Grinding, Turning, Milling)
Technical assistance regarding the choice of the materials, the coating, the design of the tools
PolyMIM GmbH
Exhibitors
Exhibitor Profile
PolyMIM was established in 2005 as the metal powder compound division of Polymer-Chemie GmbH and
re-established as a wholly-owned subsidiary of Polymer-Group in August 2010. PolyMIM GmbH produces
and markets its range of standard and custom-made polyMIM feedstock. Metal injection moulding allows
for cost-effective production of complex metal components by combining the processes of injection
moulding and sintering. PolyMIM developed an environmentally sound water-soluble binder system. Thus
polyMIM combines the cost and quality advantages of metal injection moulding with ecological demands.
All common MIM metal alloys are available as ready-to-mould standard feedstock compounds. The
polyMIM portfolio includes low alloy, stainless, copper, titanium and hard metal feedstock.
PolyMIM meets highest quality requirements and is certified in accordance with ISO/TS 16949.
Pometon SpA
Via Circonvallazione, 62
Maerne di Martellago (Venezia)
I-30030, Italy
Stand: 53
member
Stand: 51
Exhibitor Profile
With 70 years experience POMETON is one of the leading companies worldwide in Ferrous and Nonferrous metal powders production. Using high-tech manufacturing processes such as atomization,
reduction and electrodeposition, the plant in Italy produce a wide range of metal powders for different
application fields. In PM field and in addition to the traditional Pure Iron (FERSINT) and DiffusionBonded powders (FERALLOY DB and ST for Sinter-hardening), we are developing also the new family
ECOSINT, powders based with low content of Nickel (<1%).
PIM International
member
Stand: 39
Exhibitor Profile
PIM International is the industry leading publication for MIM/CIM parts producers, end users and industry
suppliers. Each issue features news, company reports, exclusive commissioned articles and technical papers.
Our website, www.pim-international.com is the leading online resource for PIM, hosting all previously
published content and in-depth guides to the technology.
PVA TePla AG
Im Westpark 10 - 12
35435 Wettenberg
Germany
Exhibitor Profile
The PVA TePla group is an internationally established supplier of systems and facilities for producing, treating and
refining high-quality materials and surfaces using:
Vacuum - High temperatures - Plasma
PVA TePla AG is one of the key players in the world market for hard metal sintering systems and crystal-growing
systems as well as plasma systems used for surface activation and ultra-fine cleaning. With its systems and services, PVA
TePla supports and enables the most important manufacturing processes and technological developments of industrial
concerns, primarily in the semiconductor, hard metal, electrical/electronic and optical industries as well as in the
forward-looking areas of energy, communication,photovoltaic and environmental technology.
36
Stand: 62
Euro PM2012
Stand: 37
Exhibitor Profile
AP&C, Advanced Powders and Coatings is a division of Raymor Industries Inc.. Raymor Industries is
located in Boisbriand, Quebec. Canada. The AP&C division is a producer of plasma atomized spherical
metal powders. Our products are used primarily for medical, aeronautical and commercial applications.
AP&C quality powders are sold in more than 20 countries.
AP&C atomizes a variety of high melting point metal such as Titanium, Niobium, Molybdenum and
numerous alloys i.e., Ni-Ti,Ti-6Al-4V grade 5 and 23 (ELI). AP&C powder products are designed
specifically for Metal Injection Molding, Additive Manufacturing, Hot Isostatic Pressing and Coating
processes.
member
For more information regarding these products, please visit our web site at www.raymor.com or
contact Bruno Beauchamp at bbeauchamp@raymor.com
member
Stand: 72
Exhibitor Profile
Specialist manufacturers of high quality gas atomised powders. The MICROFINE range of prealloyed
and master alloy powders, specifically designed for Metal Injection Moulding, covers in excess of 500
different alloys. Extensive ranges of powders for Coatings (Thermal and Cold Spray), Rapid
Manufacturing, Brazing and HIPping are also offered.
Stand: 6
member
Exhibitor Profile
ECKA Granules is the global leading manufacturer of non-ferrous metal powders. The product portfolio
includes a wide range of powders and pastes from coarse to ultrafine (< 5 m) including Aluminium, Copper,
Magnesium, Stainless Steel, Tin, Lead, Zinc, Silicon, and their alloys, as well as ready-to-press blends.
Production techniques include milling and grinding, air-, water- and gas-atomisation, granulation and melting for
recycling processing.
Stand: 47
member
37
Exhibitors
Exhibitor Profile
Sacmi is a 90 year old international group, world-leading designer, builder and marketer of machines and
complete plants for the ceramic, plastic, beverage & packaging and food industries. With more than 12.000
units in 50 years, one of the core businesses has always been the design and construction of oleodynamic
presses, not only for the ceramic industry but also for metal sheets,ductile alloys, plastics and powder
metallurgy.
The group employs about 3500 people and consists of more than 70 companies in 24 countries on
different continents, within their outlet markets, capable of supplying customers with fast, efficient local
assistance service - a must for all leading international enterprises. Thousands of Sacmi machines are in
use all over the world and exports account for around 85% of total business.
New at Euro
PM2012
Stand: 14
Exhibitor Profile
SIGMA (www.sigmasoft.de) is wholly owned by MAGMA (www.magmasoft.de), market leader in casting
simulation technology based in Aachen, Germany. Our SIGMASOFT simulation solution optimizes the
development process for plastics and PIM components and injection molds, as well as the management of
injection molding processes. The two product lines plastics injection molding and metal casting share the
same 3D simulation technologies, validated and constantly improved over a period of 25 years. A designand process-oriented simulation tool, SIGMASOFT, with its enhanced simulation approach, means a
significant benefit to users, if compared to any other conventional simulation approach employed in plastics
injection molding.
Exhibitors
Ohlerkirchweg 66
P. O. Box 10 06 45
Mnchengladbach
41069, Germany
Exhibitor Profile
SMS Meer produces among equipment for pipe manufacturing and forging presses, hydraulic and mechanical
powder presses and has sold more than 1,800 of them.
SMS Meer is for over 50 years a competent partner for the metal powder, ceramics and tungsten carbide
industry.
Range of powder presses and adapters:
Hydraulic CNC presses from 600 up to
High-speed mechanical presses from 30 up to 450 kN
20,000 kN
Controlled punch adapters (CPA) with up to eight integrated
Hybrid CNC presses up to 2,500 kN
CNC press axes
Additional handling equipment
STEULER-KCH GmbH
Georg - Steuler - Strasse
56203 Hoehr-Grenzhausen
GERMANY
Exhibitor Profile
Steuler Kiln Furniture
Kiln furniture by Steuler is customer-friendly, the solutions are versatile, the operational safety is perfect. The
thermal, mechanical and chemical requirements and special geometries are coherently considered and
combined to a sensible and qualitative unit. The basis for this are the highly variable raw material
components from cordierite, mullite, andalusite and corundum.
SUMCA SAS
Exhibitor Profile
TAV is one of the world's leading manufacturers of vacuum furnaces and has been an established supplier of
the PIM industry for over 20 years.
TAV product range for the PIM industry includes high temperature vacuum sintering furnaces, high pressure
sinter-HIP furnaces and debinding/pre-sintering furnaces.
TAV provides its customers with turn-key installations and with a comprehensive technical support in every
step of the process.
38
Stand: 45
member
Stand: 66
Stand: 44
member
Stand: 49
member
Euro PM2012
Exhibitor Profile
TIMCAL Graphite & Carbon is committed to produce highly specialized graphite and carbon materials for
today's and tomorrow's Powder Metallurgy Industries. TIMCAL offers reliable supply of Natural Graphite
from its own mine in Lac Des Iles, Canada, and produces Primary Synthetic Graphite in Switzerland.
TIMCAL will highlight its wide range of Graphite solutions designed specifically for P/M applications needs:
Flowability, Dimensional Control, PM parts Mechanical Performance. TIMCAL Graphite & Carbon is a
member of IMERYS, a world leader in adding value to minerals.
Stand: 2
Exhibitor Profile
The private company is committed to manufacturing Carbonyl Iron Powder (CIP), a versatile raw material
with a variety of applications in hi-tech industries, among which metal injection molding, diamond synthesis
and diamond tools included. Yuelong was founded in 2003 and has been developing at a amazing speed
since then. With state-of-the-art technology and strict quality-control systems, Yuelong has a capacity of
CIP 3000 MT/annually in the mean time. Late 2009, in order to provide better customer service, Yuelong
set up the first overseas branch in Germany. Early 2010, Yuelong launched a new production line for
atomized iron powder and stainless steel powder. Any form of cooperating proposals is highly
appreciated.
member
Exhibitor Profile
ZIRCAR Ceramics, Inc. brings nearly 40 years of Low Mass Setter Materials expertise to PM and MIM
sintering applications. This year we are adding several new products that will work to increase your
productivity. Al2O3 Products include : ZAL-45AA - porous, machinable setter board; APA-4 a new
stronger veneering paper; Backerboard-C a new high strength fiber board; Naneramically infused
machined setters for the most difficult of MIM part topographies. Precision CNC machined prototypes
and quantity discounts available.
Stand: 42
39
Exhibitors
member
Contact : Bo Li
T 0086-13827789188
F 0086-757-83938579
W www.ylcip.com
Stand: 24
Euro PM2012 will be providing the following magazines for the benefits of our delegates, available in the magazine area.
Exhibitors
40
Membership Benefits
10 Reasons to join the EPMA
European and World PM Production Statistics and information
Access to PM Technology and Development Programmes
Networking opportunites at conferences, events and seminars
Information and lobbying on legislation, such as REACH
Join the Industry-wide Benchmarking programme
Discounts on Training Courses, Congresses and Exhibitions
Free listing on the Worlds most comprehensive PM website
Discounted PM publications, reports and journals
Weekly email news bulletins and quarterly EPMA newsletters
Access the Translated Glossary of Powder Metallurgy
www.epma.com
Euro PM2012 will take place at the Congress Centre Basel, Messeplatz 21
CH-4058 Basel, Switzerland;
Tel: +41 58 206 28 28, Fax: +41 58 206 21 86, www.congress.ch
TRAVEL
BY AIR:
General Information
1) the number 50 bus from the airport to Basel Railway Station (SBB), and then tram number 2 to the Messeplatz stop on
Exhibition Square and on the day of arrival, the printed reservation confirmation for the hotel guarantees a free transfer by
public transport from the EuroAirport to the hotel
2) an airport taxi from the taxi stands located in front of the arrivals hall, which will take 15 minutes. The main Swiss taxi
operators are Taxi Zentrale, tel: +41 (0)612 222 222 and 33 Taxi, tel: +41 (0)613 333 333
Zurich Airport www.zurich-airport.com has a frequent train connection with Basel SBB station, and a direct train every hour.
The journey time is around 1 hour 20 minutes
BY TRAIN:
Basel forms a rail hub for ICE, IC and EC connections. All three of Basels railway stations (Basel Railway Station inclusive of
the Swiss SBB and French SNCF, and the Basel Badischer Bahnhof) are within 10 minutes of the Congress Centre, and on the
day of arrival, the printed reservation confirmation for the hotel guarantees a free transfer by public transport from the station
to the hotel.
BY CAR:
If travelling by road, take the Messe exit from the A2 motorway which leads directly to the Congress Centre (parking available
at the multi-storey car park in Exhibition Square).
IN AND AROUND BASEL
Delegates staying at a hotel in Basel will receive a free Basel mobility ticket when checking in to the hotel. This allows free use
of public transport in the city of Basel and its environs (zones 10, 11 and EuroAirport) for the duration of the congress.
Congress Centre
42
Stadtcasino
Euro PM2012
43
General Information
General Information
44
Euro PM2012
General Information
Please tick the relevant section of the Congress Registration Form on page 55 to receive further information on these
meetings.
45
Available to all delegates and registered exhibition personnel. Places will be limited, and will be offered on a first-comefirst-served basis. Please register your interest on the registration form on page 55 and we will send more information and
details of transfer costs in due course.
NB: Restrictions may apply and tour attendance will also be subject to the host companys approval. If your travel plans
depend upon participation in a tour, please contact the EPMA in the first instance.
General Information
46
Euro PM2012
General Information
47
General Information
Rates
CHF325.00 (approx. 270) Single room, double-bed, bath/shower, WC. Prices are per room
and night, including breakfast, service,VAT and a Mobility Ticket. The statutory bed tax of CHF
3.50 per person and night will be added to the price of accommodation.
48
Euro PM2012
General Information
Characteristics:
A very comfortable, first-class hotel located directly on the Rhine. Most of the rooms have a
wonderful view of the river and the Old Town.You will be delighted by the culinary specialities
on offer at the fish restaurant, Caf Spitz, which is well known far beyond the city of Basel.
Rates
CHF285.00 (approx. 236) Single room, shower, WC. Prices are per room and night, including
breakfast, service,VAT and a Mobility Ticket. The statutory bed tax of CHF 3.50 per person
and night will be added to the price of accommodation.
(7) Dorint Hotel an der Messe Basel 3* Schnaustrasse 10, 4058 Basel
www.dorint.com/basel | Telephone 0041 61 695 70 00
Characteristics:
Located in the direct vicinity of the trade fair grounds, Congress
Center and Musical Theater and only seven minutes away from the Old Town. 171 modern
and bright superior, executive and apartment rooms, equipped with high-speed wireless
internet access, pay TV and all the amenities that you can expect of a modern hotel in a city
centre. The nearest tram (no. 14) or bus (no. 30) are located just two minutes away.
Rates
CHF251.00 (approx. 208) Single room, double-bed, bath/shower, WC Prices are per room
and night, including breakfast, service,VAT and a Mobility Ticket. The statutory bed tax of
CHF 3.50 per person and night will be added to the price of accommodation.
49
General Information
50
Euro PM2012
General Information
Characteristics:
The Hotel Rheinfelderhof is a comfortable hotel in the city centre, where you will immediately
feel at home thanks to its family atmosphere. The hotel is located at the heart of the
Kleinbasel quarter, in the immediate vicinity of the city's trade fair and congress centre. Public
transport connections are also available very close to the hotel.
Rates
CHF150.00 (approx. 124) Single room, bath/shower, WC
Prices are per room and night, including breakfast, service,VAT and a Mobility Ticket.
The statutory bed tax of CHF 3.50 per person and night will be added to the price of
accommodation.
(79) Jugendherberge Basel St. Alban YH, St. Alban-Kirchrain 10, 4052 Basel
www.youthhostel.ch/basel | Telephone 0041 61 272 05 72
Characteristics:
It is glorious to stay in this quiet, green, sleepy oasis of Basel, not far from the Rhine and the
city center. The hostel provides 234 beds in various room types (double room to six-bedded
rooms). Large lounge with TV, Snack bar, conference room (22 seats), Kiosk, Bicycle room,
Internet corner, wheelchair access.
Rates
CHF 119.00 (approx. 99) Single room, shower, WC
Prices are per room and night, including breakfast, service,VAT and a Mobility Ticket.
The statutory bed tax of CHF 3.50 per person and night will be added to the price of
accommodation.
51
First Name
Company / Organisation
Address
Post Code
Telephone
Fax
Country
1. Hotel Reservation
General Information
Hotel
Single
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
CHF
325.00
275.00
300.00
330.00
285.00
230.00
251.00
252.00
170.00
170.00
160.00
150.00
150.00
119.00
41.00
Bed in shared
four bed room
Arrival date:
approx. in
(270.00)
(229.00)
(249.00)
(274.00)
(236.00)
(191.00)
(208.00)
(209.00)
(141.00)
(141.00)
(133.00)
(124.00)
(124.00)
(99.00)
(34.00)
Departure date:
2. Booking Guarantee
Visa
Master Card
American Express
Diners
Name of Cardholder:
Card number
Exp. date:
The reservation is only possible with credit card details. Needed as a guarantee.
City-Tax CHF 3.50 per person and night is not included in above prices. At the hotel you will receive a Mobility Ticket, which allows you to use public transport
for free during your entire stay in Basel. Prices are in Swiss Francs per room per night, breakfast, service and VAT included. Payment directly at the hotel before
departure. The general conditions of cancellation of the hotel you book will apply. The reservation will be confirmed.
52
Euro PM2012
Address ...................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Tel...........................................................................................................Email* .......................................................................................................
VAT No ...........................................................................................................
Special Dietary Requirements .............................................................................................................................................................................
* My main interest is in the following sector:
PM Applications and New Processes
Hard Materials and Diamond Tooling
Payment By
31/07/12
845
745
950
1250
225
Payment After
31/07/12
995
895
1150
1450
270
DAILY REGISTRATION
(Includes Technical Sessions and Exhibition, but no meals)
Monday
Tuesday
Wednesday
Payment By
31/07/12
Payment After
31/07/12
495
495
495
595
595
595
53
General Information
MEAL TICKETS subject to availability. Please note that these are already included in the delegate
registration packages.
Payment By
Payment After
31/07/12
31/07/12
40
45
Additional Lunch ticket (Monday) *
Additional Lunch ticket (Tuesday) *
40
45
Additional Lunch ticket (Wednesday) *
40
45
Additional Welcome Reception Ticket **
30
35
Additional Congress Dinner Ticket **
110
135
* Individual lunch tickets available for registered students. Lunches are already included in the registration
fees for other delegates.
** Additional Welcome Reception and Congress Dinner tickets available for registered students and guests
of registered delegates.
EXHIBITOR VISITOR ONLY REGISTRATION - Covers entrance to Exhibition only
General Information
Monday
Tuesday
Wednesday
ALL OTHER VISITORS SHOULD REGISTER AS A FULL OR DAILY DELEGATE (AS SHOWN ABOVE)
CANCELLATION POLICY
Cancellations will only be accepted by email, mail or fax. A 10% cancellation fee will be deducted from refunds up to and
including 1 September, after which refunds will only be made at the Organisers discretion.
CONGRESS PROCEEDINGS
4 volume sets of the Euro PM2012 Proceedings, containing both oral and poster presentations submitted to the
programme, will be available on site in Basel as follows:
VOLUME
VOLUME
VOLUME
VOLUME
I would like to order (special rates for registered Euro PM2012 delegates)
Volume 1 Hard Copy (55)
Volume 2 Hard Copy (55)
Volume 3 Hard Copy (55)
Volume 4 Hard Copy (55)
OR
All 4 Volumes Hard Copy (160)
All 4 Volumes CD Rom Format (160)
WORKING GROUP/SPECIAL SECTOR MEETINGS
Please send details on the following meetings (no extra charge for registered delegates):
European
European
European
European
European
54
Metal Injection Moulding Group open meeting (Sunday 16 September, 16.00 18.00 hrs)
Structural Parts Group general meeting (Monday 17 September 14.30 16.00 hrs)
Structural Parts Group Parts Makers Meeting (by invitation) (Monday 17 September, 16.30 18.00 hrs)
Hard Materials Group open meeting (Tuesday 18 September, 14.00 16.00 hrs)
PM Hot Isostatic Pressing Group Meeting (by invitation) (Tuesday 18 September, 16.15 18.15 hrs)
Euro PM2012
Factory Tours Wednesday afternoon 19 September. Available to delegates and registered exhibition
personnel.
NB: Restrictions may apply and tour attendance will be subject to the host companys approval. If your
travel plans depend upon participation in a tour, please contact the EPMA in the first instance.
Visit to Kennametal AMSG GmbH ( to be confirmed).
Departing Congress Centre Basel at 13.30 hrs and returning by 17.30 hrs.
Please send us a copy of the payment receipt stating clearly the name of the delegate and mentioning that it is for the
Euro PM2012. You can send it by email to europm2012@aimgroup.eu or by fax to +43 1 402 77 31
Our bank transfer details are:
Account Holder: Raiffeisen Landesbank N-Wien
c/o EuroPM 2012
Bank address: Friedrich Wilhelm Raiffeisenplatz 1, 1020 Wien
Bank account number: 519579
Swift code: Bank code: 32000
IBAN number: AT 023200000000519579
BIC: RLNWATWW
Please remember: all bank charges are payable by the payee.
PAYMENT BY CREDIT CARD
Visa
Master Card
American Express
Diners
Name of Cardholder:___________________________________
Card number __________________________________ Exp. date: __________________
I hereby authorize AIMS International to charge this credit card for the total amount due. Having signed, I confirm that I
have read and I am fully aware of the cancellation conditions stipulated on this form.
Name
________________________
Date
__________________________
Signature
________________________________
Please note that all information is correct at the time of print but the final timings and schedule
may change.
55
General Information
DIRA-GREEN
Co-operative Project
FAST SOLUTION
www.diragreen.eu
european powder
metallurgy association
INTERNATIONAL
CONGRESS &
EXHIBITION
15th - 18th September 2013
www.epma.com/pm2013
The EPMA reserves the right to make changes to the final programme.
European Powder Metallurgy Association
Talbot House, Market Street, Shrewsbury, SY1 1LG, United Kingdom
Tel: +44 1743 248899
Fax: +44 1743 362968
Email: info@epma.com
W: www.epma.com