Académique Documents
Professionnel Documents
Culture Documents
the
supply to the normal lighting fails.
Escape lighting ; Part of Emergency Lighting provided to ensure that the escape route
is
illuminated in the event of a major incident.
Process loads - are the loads that are directly relevant to the facility. In factories and
industrial plants, process loads are the motors, heaters, compressors, conveyors, etc that
Note that for redundant loads (e.g. 2 x 100% duty / standby motors), one is usually
classified as continuous and the other classified as standby. This if purely for the purposes
of the load schedule and does not reflect the actual operating conditions of the loads, i.e.
both redundant loads will be equally used even though one is classified as a standby load.
generators that require a longer start-up time (typically thirty to sixty minutes). It is used to relieve
the generators providing the spinning or non-spinning reserve and thus restore the operating reserve
(confusingly the replacement reserve is sometimes known as the 30 or 60-minute operating reserve)